gstreamer/gst/gstpoll.c

1790 lines
43 KiB
C
Raw Normal View History

/* GStreamer
* Copyright (C) 1999 Erik Walthinsen <omega@cse.ogi.edu>
* Copyright (C) 2004 Wim Taymans <wim.taymans@gmail.com>
* Copyright (C) 2007 Peter Kjellerstedt <pkj@axis.com>
2017-01-18 13:56:38 +00:00
* Copyright (C) 2008 Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
*
* gstpoll.c: File descriptor set
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the
* Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
* Boston, MA 02110-1301, USA.
*/
/**
* SECTION:gstpoll
* @title: GstPoll
* @short_description: Keep track of file descriptors and make it possible
* to wait on them in a cancellable way
*
* A #GstPoll keeps track of file descriptors much like fd_set (used with
* select()) or a struct pollfd array (used with poll()). Once created with
* gst_poll_new(), the set can be used to wait for file descriptors to be
2011-12-27 00:45:20 +00:00
* readable and/or writable. It is possible to make this wait be controlled
* by specifying %TRUE for the @controllable flag when creating the set (or
* later calling gst_poll_set_controllable()).
*
* New file descriptors are added to the set using gst_poll_add_fd(), and
* removed using gst_poll_remove_fd(). Controlling which file descriptors
2011-12-27 00:45:20 +00:00
* should be waited for to become readable and/or writable are done using
* gst_poll_fd_ctl_read(), gst_poll_fd_ctl_write() and gst_poll_fd_ctl_pri().
*
* Use gst_poll_wait() to wait for the file descriptors to actually become
2011-12-27 00:45:20 +00:00
* readable and/or writable, or to timeout if no file descriptor is available
* in time. The wait can be controlled by calling gst_poll_restart() and
* gst_poll_set_flushing().
*
* Once the file descriptor set has been waited for, one can use
* gst_poll_fd_has_closed() to see if the file descriptor has been closed,
* gst_poll_fd_has_error() to see if it has generated an error,
* gst_poll_fd_can_read() to see if it is possible to read from the file
* descriptor, and gst_poll_fd_can_write() to see if it is possible to
* write to it.
*
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "gst_private.h"
#include "glib-compat-private.h"
#include <sys/types.h>
#ifdef HAVE_UNISTD_H
#include <unistd.h>
#endif
#include <errno.h>
#include <fcntl.h>
#include <glib.h>
#ifdef G_OS_WIN32
#include <winsock2.h>
#else
#define _GNU_SOURCE 1
#ifdef HAVE_SYS_POLL_H
#include <sys/poll.h>
#endif
#ifdef HAVE_POLL_H
#include <poll.h>
#endif
#include <sys/time.h>
#include <sys/socket.h>
#endif
#ifdef G_OS_WIN32
# ifndef EWOULDBLOCK
# define EWOULDBLOCK EAGAIN /* This is just to placate gcc */
# endif
#endif /* G_OS_WIN32 */
/* OS/X needs this because of bad headers */
#include <string.h>
/* The poll() emulation on OS/X doesn't handle fds=NULL, nfds=0,
* so we prefer our own poll emulation.
*/
#if defined(BROKEN_POLL)
#undef HAVE_POLL
#endif
#include "gstpoll.h"
#define GST_CAT_DEFAULT GST_CAT_POLL
#ifdef G_OS_WIN32
typedef struct _WinsockFd WinsockFd;
struct _WinsockFd
{
gint fd;
glong event_mask;
WSANETWORKEVENTS events;
glong ignored_event_mask;
};
#endif
typedef enum
{
GST_POLL_MODE_AUTO,
GST_POLL_MODE_SELECT,
GST_POLL_MODE_PSELECT,
GST_POLL_MODE_POLL,
GST_POLL_MODE_PPOLL,
GST_POLL_MODE_WINDOWS
} GstPollMode;
struct _GstPoll
{
GstPollMode mode;
2012-01-19 08:27:04 +00:00
GMutex lock;
/* array of fds, always written to and read from with lock */
GArray *fds;
/* array of active fds, only written to from the waiting thread with the
* lock and read from with the lock or without the lock from the waiting
* thread */
GArray *active_fds;
#ifndef G_OS_WIN32
GstPollFD control_read_fd;
GstPollFD control_write_fd;
#else
GArray *active_fds_ignored;
GArray *events;
GArray *active_events;
HANDLE wakeup_event;
#endif
gboolean controllable;
volatile gint waiting;
volatile gint control_pending;
volatile gint flushing;
gboolean timer;
volatile gint rebuild;
};
static gboolean gst_poll_fd_ctl_read_unlocked (GstPoll * set, GstPollFD * fd,
gboolean active);
static gboolean gst_poll_add_fd_unlocked (GstPoll * set, GstPollFD * fd);
#define IS_FLUSHING(s) (g_atomic_int_get(&(s)->flushing))
#define SET_FLUSHING(s,val) (g_atomic_int_set(&(s)->flushing, (val)))
#define INC_WAITING(s) (g_atomic_int_add(&(s)->waiting, 1))
#define DEC_WAITING(s) (g_atomic_int_add(&(s)->waiting, -1))
#define GET_WAITING(s) (g_atomic_int_get(&(s)->waiting))
#define TEST_REBUILD(s) (g_atomic_int_compare_and_exchange(&(s)->rebuild, 1, 0))
#define MARK_REBUILD(s) (g_atomic_int_set(&(s)->rebuild, 1))
2010-12-03 11:42:10 +00:00
#ifndef G_OS_WIN32
poll: Fix various race conditions with read_control() and write_control() This addresses slightly different race conditions on Linux and Windows, and fixes gst_poll_read_control() when control_pending == 0. On Linux, the socketpair() used for control should not be made O_NONBLOCK. If there's any propagation delay between set->control_write_fd.fd and set->control_read_fd.fd, even the mutex now held will not be sufficient to prevent a race condition. There's no benefit to using O_NONBLOCK, here. Only liabilities. For Windows, it's necessary to fix the race condition between testing set->control_pending and performing WAKE_EVENT()/RELEASE_EVENT(). This is accomplished by acquiring and holding set->lock, for both of these operations. We could optimize the Linux version by making this Windows-specific. For consistency with the Linux implementation, Windows' RELEASE_EVENT() has also been made to block, although it should never happen. Also, changed release_wakeup() to return TRUE and decrement control_pending only when > 0. Furthermore, RELEASE_EVENT() is called only when control_pending == 1. Finally, changed control_pending to use normal, non-atomic arithmetic operations, since it's now protected by set->lock. Note: even though the underlying signaling mechanisms are blocking, release_wakeup() is effectively non-blocking, as it will only attempt to read from control_read_fd.fd after a byte has been written to control_write_fd.fd or WaitForSingleObject() after it's been signaled. https://bugzilla.gnome.org/show_bug.cgi?id=750397
2016-06-29 16:57:42 +00:00
static gboolean
wake_event (GstPoll * set)
{
ssize_t num_written;
while ((num_written = write (set->control_write_fd.fd, "W", 1)) != 1) {
if (num_written == -1 && errno != EAGAIN && errno != EINTR) {
g_critical ("%p: failed to wake event: %s", set, strerror (errno));
return FALSE;
}
}
return TRUE;
}
static gboolean
release_event (GstPoll * set)
{
gchar buf[1] = { '\0' };
ssize_t num_read;
while ((num_read = read (set->control_read_fd.fd, buf, 1)) != 1) {
if (num_read == -1 && errno != EAGAIN && errno != EINTR) {
g_critical ("%p: failed to release event: %s", set, strerror (errno));
return FALSE;
}
}
return TRUE;
}
2010-12-03 11:42:10 +00:00
#else
poll: Fix various race conditions with read_control() and write_control() This addresses slightly different race conditions on Linux and Windows, and fixes gst_poll_read_control() when control_pending == 0. On Linux, the socketpair() used for control should not be made O_NONBLOCK. If there's any propagation delay between set->control_write_fd.fd and set->control_read_fd.fd, even the mutex now held will not be sufficient to prevent a race condition. There's no benefit to using O_NONBLOCK, here. Only liabilities. For Windows, it's necessary to fix the race condition between testing set->control_pending and performing WAKE_EVENT()/RELEASE_EVENT(). This is accomplished by acquiring and holding set->lock, for both of these operations. We could optimize the Linux version by making this Windows-specific. For consistency with the Linux implementation, Windows' RELEASE_EVENT() has also been made to block, although it should never happen. Also, changed release_wakeup() to return TRUE and decrement control_pending only when > 0. Furthermore, RELEASE_EVENT() is called only when control_pending == 1. Finally, changed control_pending to use normal, non-atomic arithmetic operations, since it's now protected by set->lock. Note: even though the underlying signaling mechanisms are blocking, release_wakeup() is effectively non-blocking, as it will only attempt to read from control_read_fd.fd after a byte has been written to control_write_fd.fd or WaitForSingleObject() after it's been signaled. https://bugzilla.gnome.org/show_bug.cgi?id=750397
2016-06-29 16:57:42 +00:00
static void
format_last_error (gchar * buf, size_t buf_len)
{
DWORD flags = FORMAT_MESSAGE_FROM_SYSTEM;
LPCVOID src = NULL;
DWORD lang = 0;
DWORD id;
id = GetLastError ();
FormatMessage (flags, src, id, lang, buf, (DWORD) buf_len, NULL);
SetLastError (id);
}
static gboolean
wake_event (GstPoll * set)
{
SetLastError (0);
errno = 0;
if (!SetEvent (set->wakeup_event)) {
gchar msg[1024] = "<unknown>";
format_last_error (msg, sizeof (msg));
g_critical ("%p: failed to set wakup_event: %s", set, msg);
errno = EBADF;
return FALSE;
}
return TRUE;
}
static gboolean
release_event (GstPoll * set)
{
DWORD status;
SetLastError (0);
errno = 0;
status = WaitForSingleObject (set->wakeup_event, INFINITE);
if (status) {
poll: Fix various race conditions with read_control() and write_control() This addresses slightly different race conditions on Linux and Windows, and fixes gst_poll_read_control() when control_pending == 0. On Linux, the socketpair() used for control should not be made O_NONBLOCK. If there's any propagation delay between set->control_write_fd.fd and set->control_read_fd.fd, even the mutex now held will not be sufficient to prevent a race condition. There's no benefit to using O_NONBLOCK, here. Only liabilities. For Windows, it's necessary to fix the race condition between testing set->control_pending and performing WAKE_EVENT()/RELEASE_EVENT(). This is accomplished by acquiring and holding set->lock, for both of these operations. We could optimize the Linux version by making this Windows-specific. For consistency with the Linux implementation, Windows' RELEASE_EVENT() has also been made to block, although it should never happen. Also, changed release_wakeup() to return TRUE and decrement control_pending only when > 0. Furthermore, RELEASE_EVENT() is called only when control_pending == 1. Finally, changed control_pending to use normal, non-atomic arithmetic operations, since it's now protected by set->lock. Note: even though the underlying signaling mechanisms are blocking, release_wakeup() is effectively non-blocking, as it will only attempt to read from control_read_fd.fd after a byte has been written to control_write_fd.fd or WaitForSingleObject() after it's been signaled. https://bugzilla.gnome.org/show_bug.cgi?id=750397
2016-06-29 16:57:42 +00:00
const gchar *reason = "unknown";
gchar msg[1024] = "<unknown>";
switch (status) {
case WAIT_ABANDONED:
reason = "WAIT_ABANDONED";
break;
case WAIT_TIMEOUT:
reason = "WAIT_TIMEOUT";
break;
case WAIT_FAILED:
format_last_error (msg, sizeof (msg));
reason = msg;
break;
default:
reason = "other";
break;
}
g_critical ("%p: failed to block on wakup_event: %s", set, reason);
errno = EBADF;
return FALSE;
}
if (!ResetEvent (set->wakeup_event)) {
gchar msg[1024] = "<unknown>";
format_last_error (msg, sizeof (msg));
g_critical ("%p: failed to reset wakup_event: %s", set, msg);
errno = EBADF;
return FALSE;
}
return TRUE;
}
2010-12-03 11:42:10 +00:00
#endif
/* the poll/select call is also performed on a control socket, that way
* we can send special commands to control it */
static inline gboolean
raise_wakeup (GstPoll * set)
{
gboolean result = TRUE;
poll: Fix various race conditions with read_control() and write_control() This addresses slightly different race conditions on Linux and Windows, and fixes gst_poll_read_control() when control_pending == 0. On Linux, the socketpair() used for control should not be made O_NONBLOCK. If there's any propagation delay between set->control_write_fd.fd and set->control_read_fd.fd, even the mutex now held will not be sufficient to prevent a race condition. There's no benefit to using O_NONBLOCK, here. Only liabilities. For Windows, it's necessary to fix the race condition between testing set->control_pending and performing WAKE_EVENT()/RELEASE_EVENT(). This is accomplished by acquiring and holding set->lock, for both of these operations. We could optimize the Linux version by making this Windows-specific. For consistency with the Linux implementation, Windows' RELEASE_EVENT() has also been made to block, although it should never happen. Also, changed release_wakeup() to return TRUE and decrement control_pending only when > 0. Furthermore, RELEASE_EVENT() is called only when control_pending == 1. Finally, changed control_pending to use normal, non-atomic arithmetic operations, since it's now protected by set->lock. Note: even though the underlying signaling mechanisms are blocking, release_wakeup() is effectively non-blocking, as it will only attempt to read from control_read_fd.fd after a byte has been written to control_write_fd.fd or WaitForSingleObject() after it's been signaled. https://bugzilla.gnome.org/show_bug.cgi?id=750397
2016-06-29 16:57:42 +00:00
/* makes testing control_pending and WAKE_EVENT() atomic. */
g_mutex_lock (&set->lock);
if (set->control_pending == 0) {
2010-12-03 11:42:10 +00:00
/* raise when nothing pending */
2011-07-25 13:21:21 +00:00
GST_LOG ("%p: raise", set);
poll: Fix various race conditions with read_control() and write_control() This addresses slightly different race conditions on Linux and Windows, and fixes gst_poll_read_control() when control_pending == 0. On Linux, the socketpair() used for control should not be made O_NONBLOCK. If there's any propagation delay between set->control_write_fd.fd and set->control_read_fd.fd, even the mutex now held will not be sufficient to prevent a race condition. There's no benefit to using O_NONBLOCK, here. Only liabilities. For Windows, it's necessary to fix the race condition between testing set->control_pending and performing WAKE_EVENT()/RELEASE_EVENT(). This is accomplished by acquiring and holding set->lock, for both of these operations. We could optimize the Linux version by making this Windows-specific. For consistency with the Linux implementation, Windows' RELEASE_EVENT() has also been made to block, although it should never happen. Also, changed release_wakeup() to return TRUE and decrement control_pending only when > 0. Furthermore, RELEASE_EVENT() is called only when control_pending == 1. Finally, changed control_pending to use normal, non-atomic arithmetic operations, since it's now protected by set->lock. Note: even though the underlying signaling mechanisms are blocking, release_wakeup() is effectively non-blocking, as it will only attempt to read from control_read_fd.fd after a byte has been written to control_write_fd.fd or WaitForSingleObject() after it's been signaled. https://bugzilla.gnome.org/show_bug.cgi?id=750397
2016-06-29 16:57:42 +00:00
result = wake_event (set);
}
if (result) {
set->control_pending++;
}
poll: Fix various race conditions with read_control() and write_control() This addresses slightly different race conditions on Linux and Windows, and fixes gst_poll_read_control() when control_pending == 0. On Linux, the socketpair() used for control should not be made O_NONBLOCK. If there's any propagation delay between set->control_write_fd.fd and set->control_read_fd.fd, even the mutex now held will not be sufficient to prevent a race condition. There's no benefit to using O_NONBLOCK, here. Only liabilities. For Windows, it's necessary to fix the race condition between testing set->control_pending and performing WAKE_EVENT()/RELEASE_EVENT(). This is accomplished by acquiring and holding set->lock, for both of these operations. We could optimize the Linux version by making this Windows-specific. For consistency with the Linux implementation, Windows' RELEASE_EVENT() has also been made to block, although it should never happen. Also, changed release_wakeup() to return TRUE and decrement control_pending only when > 0. Furthermore, RELEASE_EVENT() is called only when control_pending == 1. Finally, changed control_pending to use normal, non-atomic arithmetic operations, since it's now protected by set->lock. Note: even though the underlying signaling mechanisms are blocking, release_wakeup() is effectively non-blocking, as it will only attempt to read from control_read_fd.fd after a byte has been written to control_write_fd.fd or WaitForSingleObject() after it's been signaled. https://bugzilla.gnome.org/show_bug.cgi?id=750397
2016-06-29 16:57:42 +00:00
g_mutex_unlock (&set->lock);
return result;
}
static inline gboolean
release_wakeup (GstPoll * set)
{
poll: Fix various race conditions with read_control() and write_control() This addresses slightly different race conditions on Linux and Windows, and fixes gst_poll_read_control() when control_pending == 0. On Linux, the socketpair() used for control should not be made O_NONBLOCK. If there's any propagation delay between set->control_write_fd.fd and set->control_read_fd.fd, even the mutex now held will not be sufficient to prevent a race condition. There's no benefit to using O_NONBLOCK, here. Only liabilities. For Windows, it's necessary to fix the race condition between testing set->control_pending and performing WAKE_EVENT()/RELEASE_EVENT(). This is accomplished by acquiring and holding set->lock, for both of these operations. We could optimize the Linux version by making this Windows-specific. For consistency with the Linux implementation, Windows' RELEASE_EVENT() has also been made to block, although it should never happen. Also, changed release_wakeup() to return TRUE and decrement control_pending only when > 0. Furthermore, RELEASE_EVENT() is called only when control_pending == 1. Finally, changed control_pending to use normal, non-atomic arithmetic operations, since it's now protected by set->lock. Note: even though the underlying signaling mechanisms are blocking, release_wakeup() is effectively non-blocking, as it will only attempt to read from control_read_fd.fd after a byte has been written to control_write_fd.fd or WaitForSingleObject() after it's been signaled. https://bugzilla.gnome.org/show_bug.cgi?id=750397
2016-06-29 16:57:42 +00:00
gboolean result = FALSE;
poll: Fix various race conditions with read_control() and write_control() This addresses slightly different race conditions on Linux and Windows, and fixes gst_poll_read_control() when control_pending == 0. On Linux, the socketpair() used for control should not be made O_NONBLOCK. If there's any propagation delay between set->control_write_fd.fd and set->control_read_fd.fd, even the mutex now held will not be sufficient to prevent a race condition. There's no benefit to using O_NONBLOCK, here. Only liabilities. For Windows, it's necessary to fix the race condition between testing set->control_pending and performing WAKE_EVENT()/RELEASE_EVENT(). This is accomplished by acquiring and holding set->lock, for both of these operations. We could optimize the Linux version by making this Windows-specific. For consistency with the Linux implementation, Windows' RELEASE_EVENT() has also been made to block, although it should never happen. Also, changed release_wakeup() to return TRUE and decrement control_pending only when > 0. Furthermore, RELEASE_EVENT() is called only when control_pending == 1. Finally, changed control_pending to use normal, non-atomic arithmetic operations, since it's now protected by set->lock. Note: even though the underlying signaling mechanisms are blocking, release_wakeup() is effectively non-blocking, as it will only attempt to read from control_read_fd.fd after a byte has been written to control_write_fd.fd or WaitForSingleObject() after it's been signaled. https://bugzilla.gnome.org/show_bug.cgi?id=750397
2016-06-29 16:57:42 +00:00
/* makes testing/modifying control_pending and RELEASE_EVENT() atomic. */
g_mutex_lock (&set->lock);
if (set->control_pending > 0) {
/* release, only if this was the last pending. */
if (set->control_pending == 1) {
GST_LOG ("%p: release", set);
result = release_event (set);
} else {
result = TRUE;
}
if (result) {
set->control_pending--;
}
} else {
errno = EWOULDBLOCK;
}
poll: Fix various race conditions with read_control() and write_control() This addresses slightly different race conditions on Linux and Windows, and fixes gst_poll_read_control() when control_pending == 0. On Linux, the socketpair() used for control should not be made O_NONBLOCK. If there's any propagation delay between set->control_write_fd.fd and set->control_read_fd.fd, even the mutex now held will not be sufficient to prevent a race condition. There's no benefit to using O_NONBLOCK, here. Only liabilities. For Windows, it's necessary to fix the race condition between testing set->control_pending and performing WAKE_EVENT()/RELEASE_EVENT(). This is accomplished by acquiring and holding set->lock, for both of these operations. We could optimize the Linux version by making this Windows-specific. For consistency with the Linux implementation, Windows' RELEASE_EVENT() has also been made to block, although it should never happen. Also, changed release_wakeup() to return TRUE and decrement control_pending only when > 0. Furthermore, RELEASE_EVENT() is called only when control_pending == 1. Finally, changed control_pending to use normal, non-atomic arithmetic operations, since it's now protected by set->lock. Note: even though the underlying signaling mechanisms are blocking, release_wakeup() is effectively non-blocking, as it will only attempt to read from control_read_fd.fd after a byte has been written to control_write_fd.fd or WaitForSingleObject() after it's been signaled. https://bugzilla.gnome.org/show_bug.cgi?id=750397
2016-06-29 16:57:42 +00:00
g_mutex_unlock (&set->lock);
return result;
}
static inline gint
release_all_wakeup (GstPoll * set)
{
gint old;
poll: Fix various race conditions with read_control() and write_control() This addresses slightly different race conditions on Linux and Windows, and fixes gst_poll_read_control() when control_pending == 0. On Linux, the socketpair() used for control should not be made O_NONBLOCK. If there's any propagation delay between set->control_write_fd.fd and set->control_read_fd.fd, even the mutex now held will not be sufficient to prevent a race condition. There's no benefit to using O_NONBLOCK, here. Only liabilities. For Windows, it's necessary to fix the race condition between testing set->control_pending and performing WAKE_EVENT()/RELEASE_EVENT(). This is accomplished by acquiring and holding set->lock, for both of these operations. We could optimize the Linux version by making this Windows-specific. For consistency with the Linux implementation, Windows' RELEASE_EVENT() has also been made to block, although it should never happen. Also, changed release_wakeup() to return TRUE and decrement control_pending only when > 0. Furthermore, RELEASE_EVENT() is called only when control_pending == 1. Finally, changed control_pending to use normal, non-atomic arithmetic operations, since it's now protected by set->lock. Note: even though the underlying signaling mechanisms are blocking, release_wakeup() is effectively non-blocking, as it will only attempt to read from control_read_fd.fd after a byte has been written to control_write_fd.fd or WaitForSingleObject() after it's been signaled. https://bugzilla.gnome.org/show_bug.cgi?id=750397
2016-06-29 16:57:42 +00:00
/* makes testing control_pending and RELEASE_EVENT() atomic. */
g_mutex_lock (&set->lock);
poll: Fix various race conditions with read_control() and write_control() This addresses slightly different race conditions on Linux and Windows, and fixes gst_poll_read_control() when control_pending == 0. On Linux, the socketpair() used for control should not be made O_NONBLOCK. If there's any propagation delay between set->control_write_fd.fd and set->control_read_fd.fd, even the mutex now held will not be sufficient to prevent a race condition. There's no benefit to using O_NONBLOCK, here. Only liabilities. For Windows, it's necessary to fix the race condition between testing set->control_pending and performing WAKE_EVENT()/RELEASE_EVENT(). This is accomplished by acquiring and holding set->lock, for both of these operations. We could optimize the Linux version by making this Windows-specific. For consistency with the Linux implementation, Windows' RELEASE_EVENT() has also been made to block, although it should never happen. Also, changed release_wakeup() to return TRUE and decrement control_pending only when > 0. Furthermore, RELEASE_EVENT() is called only when control_pending == 1. Finally, changed control_pending to use normal, non-atomic arithmetic operations, since it's now protected by set->lock. Note: even though the underlying signaling mechanisms are blocking, release_wakeup() is effectively non-blocking, as it will only attempt to read from control_read_fd.fd after a byte has been written to control_write_fd.fd or WaitForSingleObject() after it's been signaled. https://bugzilla.gnome.org/show_bug.cgi?id=750397
2016-06-29 16:57:42 +00:00
if ((old = set->control_pending) > 0) {
GST_LOG ("%p: releasing %d", set, old);
if (release_event (set)) {
set->control_pending = 0;
} else {
old = 0;
}
}
poll: Fix various race conditions with read_control() and write_control() This addresses slightly different race conditions on Linux and Windows, and fixes gst_poll_read_control() when control_pending == 0. On Linux, the socketpair() used for control should not be made O_NONBLOCK. If there's any propagation delay between set->control_write_fd.fd and set->control_read_fd.fd, even the mutex now held will not be sufficient to prevent a race condition. There's no benefit to using O_NONBLOCK, here. Only liabilities. For Windows, it's necessary to fix the race condition between testing set->control_pending and performing WAKE_EVENT()/RELEASE_EVENT(). This is accomplished by acquiring and holding set->lock, for both of these operations. We could optimize the Linux version by making this Windows-specific. For consistency with the Linux implementation, Windows' RELEASE_EVENT() has also been made to block, although it should never happen. Also, changed release_wakeup() to return TRUE and decrement control_pending only when > 0. Furthermore, RELEASE_EVENT() is called only when control_pending == 1. Finally, changed control_pending to use normal, non-atomic arithmetic operations, since it's now protected by set->lock. Note: even though the underlying signaling mechanisms are blocking, release_wakeup() is effectively non-blocking, as it will only attempt to read from control_read_fd.fd after a byte has been written to control_write_fd.fd or WaitForSingleObject() after it's been signaled. https://bugzilla.gnome.org/show_bug.cgi?id=750397
2016-06-29 16:57:42 +00:00
g_mutex_unlock (&set->lock);
return old;
}
static gint
find_index (GArray * array, GstPollFD * fd)
{
#ifndef G_OS_WIN32
struct pollfd *ifd;
#else
WinsockFd *ifd;
#endif
guint i;
/* start by assuming the index found in the fd is still valid */
if (fd->idx >= 0 && fd->idx < array->len) {
#ifndef G_OS_WIN32
ifd = &g_array_index (array, struct pollfd, fd->idx);
#else
ifd = &g_array_index (array, WinsockFd, fd->idx);
#endif
if (ifd->fd == fd->fd) {
return fd->idx;
}
}
/* the pollfd array has changed and we need to lookup the fd again */
for (i = 0; i < array->len; i++) {
#ifndef G_OS_WIN32
ifd = &g_array_index (array, struct pollfd, i);
#else
ifd = &g_array_index (array, WinsockFd, i);
#endif
if (ifd->fd == fd->fd) {
fd->idx = (gint) i;
return fd->idx;
}
}
fd->idx = -1;
return fd->idx;
}
#if !defined(HAVE_PPOLL) && defined(HAVE_POLL)
/* check if all file descriptors will fit in an fd_set */
static gboolean
selectable_fds (GstPoll * set)
{
guint i;
2012-01-19 08:27:04 +00:00
g_mutex_lock (&set->lock);
for (i = 0; i < set->fds->len; i++) {
struct pollfd *pfd = &g_array_index (set->fds, struct pollfd, i);
if (pfd->fd >= FD_SETSIZE)
goto too_many;
}
2012-01-19 08:27:04 +00:00
g_mutex_unlock (&set->lock);
return TRUE;
too_many:
{
2012-01-19 08:27:04 +00:00
g_mutex_unlock (&set->lock);
return FALSE;
}
}
/* check if the timeout will convert to a timeout value used for poll()
* without a loss of precision
*/
static gboolean
pollable_timeout (GstClockTime timeout)
{
if (timeout == GST_CLOCK_TIME_NONE)
return TRUE;
/* not a nice multiple of milliseconds */
if (timeout % 1000000)
return FALSE;
return TRUE;
}
#endif
static GstPollMode
choose_mode (GstPoll * set, GstClockTime timeout)
{
GstPollMode mode;
if (set->mode == GST_POLL_MODE_AUTO) {
#ifdef HAVE_PPOLL
mode = GST_POLL_MODE_PPOLL;
#elif defined(HAVE_POLL)
if (!selectable_fds (set) || pollable_timeout (timeout)) {
mode = GST_POLL_MODE_POLL;
} else {
#ifdef HAVE_PSELECT
mode = GST_POLL_MODE_PSELECT;
#else
mode = GST_POLL_MODE_SELECT;
#endif
}
#elif defined(HAVE_PSELECT)
mode = GST_POLL_MODE_PSELECT;
#else
mode = GST_POLL_MODE_SELECT;
#endif
} else {
mode = set->mode;
}
return mode;
}
#ifndef G_OS_WIN32
static gint
pollfd_to_fd_set (GstPoll * set, fd_set * readfds, fd_set * writefds,
fd_set * errorfds)
{
gint max_fd = -1;
guint i;
FD_ZERO (readfds);
FD_ZERO (writefds);
FD_ZERO (errorfds);
2012-01-19 08:27:04 +00:00
g_mutex_lock (&set->lock);
for (i = 0; i < set->active_fds->len; i++) {
struct pollfd *pfd = &g_array_index (set->fds, struct pollfd, i);
if (pfd->fd < FD_SETSIZE) {
if (pfd->events & POLLIN)
FD_SET (pfd->fd, readfds);
if (pfd->events & POLLOUT)
FD_SET (pfd->fd, writefds);
if (pfd->events)
FD_SET (pfd->fd, errorfds);
if (pfd->fd > max_fd && (pfd->events & (POLLIN | POLLOUT)))
max_fd = pfd->fd;
}
}
2012-01-19 08:27:04 +00:00
g_mutex_unlock (&set->lock);
return max_fd;
}
static void
fd_set_to_pollfd (GstPoll * set, fd_set * readfds, fd_set * writefds,
fd_set * errorfds)
{
guint i;
2012-01-19 08:27:04 +00:00
g_mutex_lock (&set->lock);
for (i = 0; i < set->active_fds->len; i++) {
struct pollfd *pfd = &g_array_index (set->active_fds, struct pollfd, i);
if (pfd->fd < FD_SETSIZE) {
pfd->revents = 0;
if (FD_ISSET (pfd->fd, readfds))
pfd->revents |= POLLIN;
if (FD_ISSET (pfd->fd, writefds))
pfd->revents |= POLLOUT;
if (FD_ISSET (pfd->fd, errorfds))
pfd->revents |= POLLERR;
}
}
2012-01-19 08:27:04 +00:00
g_mutex_unlock (&set->lock);
}
#else /* G_OS_WIN32 */
/*
* Translate errors thrown by the Winsock API used by GstPoll:
* WSAEventSelect, WSAWaitForMultipleEvents and WSAEnumNetworkEvents
*/
static gint
gst_poll_winsock_error_to_errno (DWORD last_error)
{
switch (last_error) {
case WSA_INVALID_HANDLE:
case WSAEINVAL:
case WSAENOTSOCK:
return EBADF;
case WSA_NOT_ENOUGH_MEMORY:
return ENOMEM;
/*
* Anything else, including:
* WSA_INVALID_PARAMETER, WSAEFAULT, WSAEINPROGRESS, WSAENETDOWN,
* WSANOTINITIALISED
*/
default:
return EINVAL;
}
}
static void
gst_poll_free_winsock_event (GstPoll * set, gint idx)
{
WinsockFd *wfd = &g_array_index (set->fds, WinsockFd, idx);
HANDLE event = g_array_index (set->events, HANDLE, idx);
WSAEventSelect (wfd->fd, event, 0);
CloseHandle (event);
}
static void
gst_poll_update_winsock_event_mask (GstPoll * set, gint idx, glong flags,
gboolean active)
{
WinsockFd *wfd;
wfd = &g_array_index (set->fds, WinsockFd, idx);
if (active)
wfd->event_mask |= flags;
else
wfd->event_mask &= ~flags;
/* reset ignored state if the new mask doesn't overlap at all */
if ((wfd->ignored_event_mask & wfd->event_mask) == 0)
wfd->ignored_event_mask = 0;
}
static gboolean
gst_poll_prepare_winsock_active_sets (GstPoll * set)
{
guint i;
g_array_set_size (set->active_fds, 0);
g_array_set_size (set->active_fds_ignored, 0);
g_array_set_size (set->active_events, 0);
g_array_append_val (set->active_events, set->wakeup_event);
for (i = 0; i < set->fds->len; i++) {
WinsockFd *wfd = &g_array_index (set->fds, WinsockFd, i);
HANDLE event = g_array_index (set->events, HANDLE, i);
if (wfd->ignored_event_mask == 0) {
gint ret;
g_array_append_val (set->active_fds, *wfd);
g_array_append_val (set->active_events, event);
ret = WSAEventSelect (wfd->fd, event, wfd->event_mask);
if (G_UNLIKELY (ret != 0)) {
errno = gst_poll_winsock_error_to_errno (WSAGetLastError ());
return FALSE;
}
} else {
g_array_append_val (set->active_fds_ignored, wfd);
}
}
return TRUE;
}
static gint
gst_poll_collect_winsock_events (GstPoll * set)
{
gint res, i;
/*
* We need to check which events are signaled, and call
* WSAEnumNetworkEvents for those that are, which resets
* the event and clears the internal network event records.
*/
res = 0;
for (i = 0; i < set->active_fds->len; i++) {
WinsockFd *wfd = &g_array_index (set->active_fds, WinsockFd, i);
HANDLE event = g_array_index (set->active_events, HANDLE, i + 1);
DWORD wait_ret;
wait_ret = WaitForSingleObject (event, 0);
if (wait_ret == WAIT_OBJECT_0) {
gint enum_ret = WSAEnumNetworkEvents (wfd->fd, event, &wfd->events);
if (G_UNLIKELY (enum_ret != 0)) {
res = -1;
errno = gst_poll_winsock_error_to_errno (WSAGetLastError ());
break;
}
res++;
} else {
/* clear any previously stored result */
memset (&wfd->events, 0, sizeof (wfd->events));
}
}
/* If all went well we also need to reset the ignored fds. */
if (res >= 0) {
res += set->active_fds_ignored->len;
for (i = 0; i < set->active_fds_ignored->len; i++) {
WinsockFd *wfd = g_array_index (set->active_fds_ignored, WinsockFd *, i);
wfd->ignored_event_mask = 0;
}
g_array_set_size (set->active_fds_ignored, 0);
}
return res;
}
#endif
/**
* gst_poll_new: (skip)
* @controllable: whether it should be possible to control a wait.
*
* Create a new file descriptor set. If @controllable, it
* is possible to restart or flush a call to gst_poll_wait() with
* gst_poll_restart() and gst_poll_set_flushing() respectively.
*
* Free-function: gst_poll_free
*
* Returns: (transfer full) (nullable): a new #GstPoll, or %NULL in
* case of an error. Free with gst_poll_free().
*/
GstPoll *
gst_poll_new (gboolean controllable)
{
GstPoll *nset;
nset = g_slice_new0 (GstPoll);
GST_DEBUG ("%p: new controllable : %d", nset, controllable);
2012-01-19 08:27:04 +00:00
g_mutex_init (&nset->lock);
#ifndef G_OS_WIN32
nset->mode = GST_POLL_MODE_AUTO;
nset->fds = g_array_new (FALSE, FALSE, sizeof (struct pollfd));
nset->active_fds = g_array_new (FALSE, FALSE, sizeof (struct pollfd));
nset->control_read_fd.fd = -1;
nset->control_write_fd.fd = -1;
{
gint control_sock[2];
if (socketpair (PF_UNIX, SOCK_STREAM, 0, control_sock) < 0)
goto no_socket_pair;
nset->control_read_fd.fd = control_sock[0];
nset->control_write_fd.fd = control_sock[1];
gst_poll_add_fd_unlocked (nset, &nset->control_read_fd);
gst_poll_fd_ctl_read_unlocked (nset, &nset->control_read_fd, TRUE);
}
#else
nset->mode = GST_POLL_MODE_WINDOWS;
nset->fds = g_array_new (FALSE, FALSE, sizeof (WinsockFd));
nset->active_fds = g_array_new (FALSE, FALSE, sizeof (WinsockFd));
nset->active_fds_ignored = g_array_new (FALSE, FALSE, sizeof (WinsockFd *));
nset->events = g_array_new (FALSE, FALSE, sizeof (HANDLE));
nset->active_events = g_array_new (FALSE, FALSE, sizeof (HANDLE));
nset->wakeup_event = CreateEvent (NULL, TRUE, FALSE, NULL);
#endif
/* ensure (re)build, though already sneakily set in non-windows case */
MARK_REBUILD (nset);
nset->controllable = controllable;
poll: Fix various race conditions with read_control() and write_control() This addresses slightly different race conditions on Linux and Windows, and fixes gst_poll_read_control() when control_pending == 0. On Linux, the socketpair() used for control should not be made O_NONBLOCK. If there's any propagation delay between set->control_write_fd.fd and set->control_read_fd.fd, even the mutex now held will not be sufficient to prevent a race condition. There's no benefit to using O_NONBLOCK, here. Only liabilities. For Windows, it's necessary to fix the race condition between testing set->control_pending and performing WAKE_EVENT()/RELEASE_EVENT(). This is accomplished by acquiring and holding set->lock, for both of these operations. We could optimize the Linux version by making this Windows-specific. For consistency with the Linux implementation, Windows' RELEASE_EVENT() has also been made to block, although it should never happen. Also, changed release_wakeup() to return TRUE and decrement control_pending only when > 0. Furthermore, RELEASE_EVENT() is called only when control_pending == 1. Finally, changed control_pending to use normal, non-atomic arithmetic operations, since it's now protected by set->lock. Note: even though the underlying signaling mechanisms are blocking, release_wakeup() is effectively non-blocking, as it will only attempt to read from control_read_fd.fd after a byte has been written to control_write_fd.fd or WaitForSingleObject() after it's been signaled. https://bugzilla.gnome.org/show_bug.cgi?id=750397
2016-06-29 16:57:42 +00:00
nset->control_pending = 0;
return nset;
/* ERRORS */
#ifndef G_OS_WIN32
no_socket_pair:
{
GST_WARNING ("%p: can't create socket pair !", nset);
gst_poll_free (nset);
return NULL;
}
#endif
}
/**
* gst_poll_new_timer: (skip)
*
* Create a new poll object that can be used for scheduling cancellable
* timeouts.
*
* A timeout is performed with gst_poll_wait(). Multiple timeouts can be
* performed from different threads.
*
* Free-function: gst_poll_free
*
* Returns: (transfer full) (nullable): a new #GstPoll, or %NULL in
* case of an error. Free with gst_poll_free().
*/
GstPoll *
gst_poll_new_timer (void)
{
GstPoll *poll;
/* make a new controllable poll set */
if (!(poll = gst_poll_new (TRUE)))
goto done;
/* we are a timer */
poll->timer = TRUE;
done:
return poll;
}
/**
* gst_poll_free:
* @set: (transfer full): a file descriptor set.
*
* Free a file descriptor set.
*/
void
gst_poll_free (GstPoll * set)
{
g_return_if_fail (set != NULL);
GST_DEBUG ("%p: freeing", set);
2009-10-12 08:07:03 +00:00
#ifndef G_OS_WIN32
if (set->control_write_fd.fd >= 0)
close (set->control_write_fd.fd);
if (set->control_read_fd.fd >= 0)
close (set->control_read_fd.fd);
#else
CloseHandle (set->wakeup_event);
{
guint i;
for (i = 0; i < set->events->len; i++)
gst_poll_free_winsock_event (set, i);
}
g_array_free (set->active_events, TRUE);
g_array_free (set->events, TRUE);
g_array_free (set->active_fds_ignored, TRUE);
#endif
g_array_free (set->active_fds, TRUE);
g_array_free (set->fds, TRUE);
2012-01-19 08:27:04 +00:00
g_mutex_clear (&set->lock);
g_slice_free (GstPoll, set);
}
2010-11-03 17:16:08 +00:00
/**
* gst_poll_get_read_gpollfd:
* @set: a #GstPoll
* @fd: a #GPollFD
*
* Get a GPollFD for the reading part of the control socket. This is useful when
* integrating with a GSource and GMainLoop.
*/
void
gst_poll_get_read_gpollfd (GstPoll * set, GPollFD * fd)
{
g_return_if_fail (set != NULL);
g_return_if_fail (fd != NULL);
2010-12-06 10:18:01 +00:00
#ifndef G_OS_WIN32
2010-11-03 17:16:08 +00:00
fd->fd = set->control_read_fd.fd;
2010-12-06 10:18:01 +00:00
#else
#if GLIB_SIZEOF_VOID_P == 8
fd->fd = (gint64) set->wakeup_event;
#else
fd->fd = (gint) set->wakeup_event;
#endif
2010-12-06 10:18:01 +00:00
#endif
2010-11-03 17:16:08 +00:00
fd->events = G_IO_IN | G_IO_HUP | G_IO_ERR;
fd->revents = 0;
}
/**
* gst_poll_fd_init:
* @fd: a #GstPollFD
*
* Initializes @fd. Alternatively you can initialize it with
* #GST_POLL_FD_INIT.
*/
void
gst_poll_fd_init (GstPollFD * fd)
{
g_return_if_fail (fd != NULL);
fd->fd = -1;
fd->idx = -1;
}
static gboolean
gst_poll_add_fd_unlocked (GstPoll * set, GstPollFD * fd)
{
gint idx;
GST_DEBUG ("%p: fd (fd:%d, idx:%d)", set, fd->fd, fd->idx);
2009-10-12 08:07:03 +00:00
idx = find_index (set->fds, fd);
if (idx < 0) {
#ifndef G_OS_WIN32
struct pollfd nfd;
nfd.fd = fd->fd;
nfd.events = POLLERR | POLLNVAL | POLLHUP;
nfd.revents = 0;
g_array_append_val (set->fds, nfd);
fd->idx = set->fds->len - 1;
#else
WinsockFd wfd;
HANDLE event;
wfd.fd = fd->fd;
wfd.event_mask = FD_CLOSE;
memset (&wfd.events, 0, sizeof (wfd.events));
wfd.ignored_event_mask = 0;
event = WSACreateEvent ();
g_array_append_val (set->fds, wfd);
g_array_append_val (set->events, event);
fd->idx = set->fds->len - 1;
#endif
MARK_REBUILD (set);
2009-10-12 08:07:03 +00:00
} else {
GST_WARNING ("%p: fd already added !", set);
}
return TRUE;
}
/**
* gst_poll_add_fd:
* @set: a file descriptor set.
* @fd: a file descriptor.
*
* Add a file descriptor to the file descriptor set.
*
* Returns: %TRUE if the file descriptor was successfully added to the set.
*/
gboolean
gst_poll_add_fd (GstPoll * set, GstPollFD * fd)
{
gboolean ret;
g_return_val_if_fail (set != NULL, FALSE);
g_return_val_if_fail (fd != NULL, FALSE);
g_return_val_if_fail (fd->fd >= 0, FALSE);
2012-01-19 08:27:04 +00:00
g_mutex_lock (&set->lock);
ret = gst_poll_add_fd_unlocked (set, fd);
2012-01-19 08:27:04 +00:00
g_mutex_unlock (&set->lock);
return ret;
}
/**
* gst_poll_remove_fd:
* @set: a file descriptor set.
* @fd: a file descriptor.
*
* Remove a file descriptor from the file descriptor set.
*
* Returns: %TRUE if the file descriptor was successfully removed from the set.
*/
gboolean
gst_poll_remove_fd (GstPoll * set, GstPollFD * fd)
{
gint idx;
g_return_val_if_fail (set != NULL, FALSE);
g_return_val_if_fail (fd != NULL, FALSE);
g_return_val_if_fail (fd->fd >= 0, FALSE);
2009-10-12 08:07:03 +00:00
GST_DEBUG ("%p: fd (fd:%d, idx:%d)", set, fd->fd, fd->idx);
2009-10-12 08:07:03 +00:00
2012-01-19 08:27:04 +00:00
g_mutex_lock (&set->lock);
/* get the index, -1 is an fd that is not added */
idx = find_index (set->fds, fd);
if (idx >= 0) {
#ifdef G_OS_WIN32
gst_poll_free_winsock_event (set, idx);
g_array_remove_index_fast (set->events, idx);
#endif
/* remove the fd at index, we use _remove_index_fast, which copies the last
* element of the array to the freed index */
g_array_remove_index_fast (set->fds, idx);
/* mark fd as removed by setting the index to -1 */
fd->idx = -1;
MARK_REBUILD (set);
2009-10-12 08:07:03 +00:00
} else {
GST_WARNING ("%p: couldn't find fd !", set);
}
2012-01-19 08:27:04 +00:00
g_mutex_unlock (&set->lock);
return idx >= 0;
}
/**
* gst_poll_fd_ctl_write:
* @set: a file descriptor set.
* @fd: a file descriptor.
* @active: a new status.
*
* Control whether the descriptor @fd in @set will be monitored for
* writability.
*
* Returns: %TRUE if the descriptor was successfully updated.
*/
gboolean
gst_poll_fd_ctl_write (GstPoll * set, GstPollFD * fd, gboolean active)
{
gint idx;
g_return_val_if_fail (set != NULL, FALSE);
g_return_val_if_fail (fd != NULL, FALSE);
g_return_val_if_fail (fd->fd >= 0, FALSE);
GST_DEBUG ("%p: fd (fd:%d, idx:%d), active : %d", set,
2009-10-12 08:07:03 +00:00
fd->fd, fd->idx, active);
2012-01-19 08:27:04 +00:00
g_mutex_lock (&set->lock);
idx = find_index (set->fds, fd);
if (idx >= 0) {
#ifndef G_OS_WIN32
struct pollfd *pfd = &g_array_index (set->fds, struct pollfd, idx);
if (active)
pfd->events |= POLLOUT;
else
pfd->events &= ~POLLOUT;
2009-10-12 08:07:03 +00:00
GST_LOG ("%p: pfd->events now %d (POLLOUT:%d)", set, pfd->events, POLLOUT);
#else
gst_poll_update_winsock_event_mask (set, idx, FD_WRITE | FD_CONNECT,
active);
#endif
MARK_REBUILD (set);
2009-10-12 08:07:03 +00:00
} else {
GST_WARNING ("%p: couldn't find fd !", set);
}
2012-01-19 08:27:04 +00:00
g_mutex_unlock (&set->lock);
return idx >= 0;
}
static gboolean
gst_poll_fd_ctl_read_unlocked (GstPoll * set, GstPollFD * fd, gboolean active)
{
gint idx;
GST_DEBUG ("%p: fd (fd:%d, idx:%d), active : %d", set,
2009-10-12 08:07:03 +00:00
fd->fd, fd->idx, active);
idx = find_index (set->fds, fd);
if (idx >= 0) {
#ifndef G_OS_WIN32
struct pollfd *pfd = &g_array_index (set->fds, struct pollfd, idx);
if (active)
pfd->events |= POLLIN;
else
pfd->events &= ~POLLIN;
#else
gst_poll_update_winsock_event_mask (set, idx, FD_READ | FD_ACCEPT, active);
#endif
MARK_REBUILD (set);
2009-10-12 08:07:03 +00:00
} else {
GST_WARNING ("%p: couldn't find fd !", set);
}
return idx >= 0;
}
/**
* gst_poll_fd_ctl_read:
* @set: a file descriptor set.
* @fd: a file descriptor.
* @active: a new status.
*
* Control whether the descriptor @fd in @set will be monitored for
* readability.
*
* Returns: %TRUE if the descriptor was successfully updated.
*/
gboolean
gst_poll_fd_ctl_read (GstPoll * set, GstPollFD * fd, gboolean active)
{
gboolean ret;
g_return_val_if_fail (set != NULL, FALSE);
g_return_val_if_fail (fd != NULL, FALSE);
g_return_val_if_fail (fd->fd >= 0, FALSE);
2012-01-19 08:27:04 +00:00
g_mutex_lock (&set->lock);
ret = gst_poll_fd_ctl_read_unlocked (set, fd, active);
2012-01-19 08:27:04 +00:00
g_mutex_unlock (&set->lock);
return ret;
}
/**
* gst_poll_fd_ctl_pri:
* @set: a file descriptor set.
* @fd: a file descriptor.
* @active: a new status.
*
* Control whether the descriptor @fd in @set will be monitored for
* exceptional conditions (POLLPRI).
*
* Not implemented on Windows (will just return %FALSE there).
*
* Returns: %TRUE if the descriptor was successfully updated.
*
* Since: 1.16
*/
gboolean
gst_poll_fd_ctl_pri (GstPoll * set, GstPollFD * fd, gboolean active)
{
#ifdef G_OS_WIN32
return FALSE;
#else
gint idx;
g_return_val_if_fail (set != NULL, FALSE);
g_return_val_if_fail (fd != NULL, FALSE);
g_return_val_if_fail (fd->fd >= 0, FALSE);
GST_DEBUG ("%p: fd (fd:%d, idx:%d), active : %d", set,
fd->fd, fd->idx, active);
g_mutex_lock (&set->lock);
idx = find_index (set->fds, fd);
if (idx >= 0) {
struct pollfd *pfd = &g_array_index (set->fds, struct pollfd, idx);
if (active)
pfd->events |= POLLPRI;
else
pfd->events &= ~POLLPRI;
GST_LOG ("%p: pfd->events now %d (POLLPRI:%d)", set, pfd->events, POLLOUT);
MARK_REBUILD (set);
} else {
GST_WARNING ("%p: couldn't find fd !", set);
}
g_mutex_unlock (&set->lock);
return idx >= 0;
#endif
}
/**
* gst_poll_fd_ignored:
* @set: a file descriptor set.
* @fd: a file descriptor.
*
* Mark @fd as ignored so that the next call to gst_poll_wait() will yield
* the same result for @fd as last time. This function must be called if no
* operation (read/write/recv/send/etc.) will be performed on @fd before
* the next call to gst_poll_wait().
*
* The reason why this is needed is because the underlying implementation
* might not allow querying the fd more than once between calls to one of
* the re-enabling operations.
*/
void
gst_poll_fd_ignored (GstPoll * set, GstPollFD * fd)
{
#ifdef G_OS_WIN32
gint idx;
g_return_if_fail (set != NULL);
g_return_if_fail (fd != NULL);
g_return_if_fail (fd->fd >= 0);
2012-01-19 08:27:04 +00:00
g_mutex_lock (&set->lock);
idx = find_index (set->fds, fd);
if (idx >= 0) {
WinsockFd *wfd = &g_array_index (set->fds, WinsockFd, idx);
wfd->ignored_event_mask = wfd->event_mask & (FD_READ | FD_WRITE);
MARK_REBUILD (set);
}
2012-01-19 08:27:04 +00:00
g_mutex_unlock (&set->lock);
#endif
}
/**
* gst_poll_fd_has_closed:
* @set: a file descriptor set.
* @fd: a file descriptor.
*
* Check if @fd in @set has closed the connection.
*
* Returns: %TRUE if the connection was closed.
*/
gboolean
gst_poll_fd_has_closed (const GstPoll * set, GstPollFD * fd)
{
gboolean res = FALSE;
gint idx;
g_return_val_if_fail (set != NULL, FALSE);
g_return_val_if_fail (fd != NULL, FALSE);
g_return_val_if_fail (fd->fd >= 0, FALSE);
2012-01-19 08:27:04 +00:00
g_mutex_lock (&((GstPoll *) set)->lock);
idx = find_index (set->active_fds, fd);
if (idx >= 0) {
#ifndef G_OS_WIN32
struct pollfd *pfd = &g_array_index (set->active_fds, struct pollfd, idx);
res = (pfd->revents & POLLHUP) != 0;
#else
WinsockFd *wfd = &g_array_index (set->active_fds, WinsockFd, idx);
res = (wfd->events.lNetworkEvents & FD_CLOSE) != 0;
#endif
2009-10-12 08:07:03 +00:00
} else {
GST_WARNING ("%p: couldn't find fd !", set);
}
2012-01-19 08:27:04 +00:00
g_mutex_unlock (&((GstPoll *) set)->lock);
GST_DEBUG ("%p: fd (fd:%d, idx:%d) %d", set, fd->fd, fd->idx, res);
return res;
}
/**
* gst_poll_fd_has_error:
* @set: a file descriptor set.
* @fd: a file descriptor.
*
* Check if @fd in @set has an error.
*
* Returns: %TRUE if the descriptor has an error.
*/
gboolean
gst_poll_fd_has_error (const GstPoll * set, GstPollFD * fd)
{
gboolean res = FALSE;
gint idx;
g_return_val_if_fail (set != NULL, FALSE);
g_return_val_if_fail (fd != NULL, FALSE);
g_return_val_if_fail (fd->fd >= 0, FALSE);
2012-01-19 08:27:04 +00:00
g_mutex_lock (&((GstPoll *) set)->lock);
idx = find_index (set->active_fds, fd);
if (idx >= 0) {
#ifndef G_OS_WIN32
struct pollfd *pfd = &g_array_index (set->active_fds, struct pollfd, idx);
res = (pfd->revents & (POLLERR | POLLNVAL)) != 0;
#else
WinsockFd *wfd = &g_array_index (set->active_fds, WinsockFd, idx);
res = (wfd->events.iErrorCode[FD_CLOSE_BIT] != 0) ||
(wfd->events.iErrorCode[FD_READ_BIT] != 0) ||
(wfd->events.iErrorCode[FD_WRITE_BIT] != 0) ||
(wfd->events.iErrorCode[FD_ACCEPT_BIT] != 0) ||
(wfd->events.iErrorCode[FD_CONNECT_BIT] != 0);
#endif
2009-10-12 08:07:03 +00:00
} else {
GST_WARNING ("%p: couldn't find fd !", set);
}
2012-01-19 08:27:04 +00:00
g_mutex_unlock (&((GstPoll *) set)->lock);
GST_DEBUG ("%p: fd (fd:%d, idx:%d) %d", set, fd->fd, fd->idx, res);
return res;
}
static gboolean
gst_poll_fd_can_read_unlocked (const GstPoll * set, GstPollFD * fd)
{
gboolean res = FALSE;
gint idx;
idx = find_index (set->active_fds, fd);
if (idx >= 0) {
#ifndef G_OS_WIN32
struct pollfd *pfd = &g_array_index (set->active_fds, struct pollfd, idx);
res = (pfd->revents & POLLIN) != 0;
#else
WinsockFd *wfd = &g_array_index (set->active_fds, WinsockFd, idx);
res = (wfd->events.lNetworkEvents & (FD_READ | FD_ACCEPT)) != 0;
#endif
2009-10-12 08:07:03 +00:00
} else {
GST_WARNING ("%p: couldn't find fd !", set);
}
GST_DEBUG ("%p: fd (fd:%d, idx:%d) %d", set, fd->fd, fd->idx, res);
return res;
}
/**
* gst_poll_fd_can_read:
* @set: a file descriptor set.
* @fd: a file descriptor.
*
* Check if @fd in @set has data to be read.
*
* Returns: %TRUE if the descriptor has data to be read.
*/
gboolean
gst_poll_fd_can_read (const GstPoll * set, GstPollFD * fd)
{
gboolean res = FALSE;
g_return_val_if_fail (set != NULL, FALSE);
g_return_val_if_fail (fd != NULL, FALSE);
g_return_val_if_fail (fd->fd >= 0, FALSE);
2012-01-19 08:27:04 +00:00
g_mutex_lock (&((GstPoll *) set)->lock);
res = gst_poll_fd_can_read_unlocked (set, fd);
2012-01-19 08:27:04 +00:00
g_mutex_unlock (&((GstPoll *) set)->lock);
return res;
}
/**
* gst_poll_fd_can_write:
* @set: a file descriptor set.
* @fd: a file descriptor.
*
* Check if @fd in @set can be used for writing.
*
* Returns: %TRUE if the descriptor can be used for writing.
*/
gboolean
gst_poll_fd_can_write (const GstPoll * set, GstPollFD * fd)
{
gboolean res = FALSE;
gint idx;
g_return_val_if_fail (set != NULL, FALSE);
g_return_val_if_fail (fd != NULL, FALSE);
g_return_val_if_fail (fd->fd >= 0, FALSE);
2012-01-19 08:27:04 +00:00
g_mutex_lock (&((GstPoll *) set)->lock);
idx = find_index (set->active_fds, fd);
if (idx >= 0) {
#ifndef G_OS_WIN32
struct pollfd *pfd = &g_array_index (set->active_fds, struct pollfd, idx);
res = (pfd->revents & POLLOUT) != 0;
#else
WinsockFd *wfd = &g_array_index (set->active_fds, WinsockFd, idx);
res = (wfd->events.lNetworkEvents & FD_WRITE) != 0;
#endif
2009-10-12 08:07:03 +00:00
} else {
GST_WARNING ("%p: couldn't find fd !", set);
}
2012-01-19 08:27:04 +00:00
g_mutex_unlock (&((GstPoll *) set)->lock);
GST_DEBUG ("%p: fd (fd:%d, idx:%d) %d", set, fd->fd, fd->idx, res);
return res;
}
/**
* gst_poll_fd_has_pri:
* @set: a file descriptor set.
* @fd: a file descriptor.
*
* Check if @fd in @set has an exceptional condition (POLLPRI).
*
* Not implemented on Windows (will just return %FALSE there).
*
* Returns: %TRUE if the descriptor has an exceptional condition.
*
* Since: 1.16
*/
gboolean
gst_poll_fd_has_pri (const GstPoll * set, GstPollFD * fd)
{
#ifdef G_OS_WIN32
return FALSE;
#else
gboolean res = FALSE;
gint idx;
g_return_val_if_fail (set != NULL, FALSE);
g_return_val_if_fail (fd != NULL, FALSE);
g_return_val_if_fail (fd->fd >= 0, FALSE);
g_mutex_lock (&((GstPoll *) set)->lock);
idx = find_index (set->active_fds, fd);
if (idx >= 0) {
struct pollfd *pfd = &g_array_index (set->active_fds, struct pollfd, idx);
res = (pfd->revents & POLLPRI) != 0;
} else {
GST_WARNING ("%p: couldn't find fd !", set);
}
g_mutex_unlock (&((GstPoll *) set)->lock);
GST_DEBUG ("%p: fd (fd:%d, idx:%d) %d", set, fd->fd, fd->idx, res);
return res;
#endif
}
/**
* gst_poll_wait:
* @set: a #GstPoll.
* @timeout: a timeout in nanoseconds.
*
* Wait for activity on the file descriptors in @set. This function waits up to
* the specified @timeout. A timeout of #GST_CLOCK_TIME_NONE waits forever.
*
* For #GstPoll objects created with gst_poll_new(), this function can only be
* called from a single thread at a time. If called from multiple threads,
* -1 will be returned with errno set to EPERM.
*
* This is not true for timer #GstPoll objects created with
* gst_poll_new_timer(), where it is allowed to have multiple threads waiting
* simultaneously.
*
* Returns: The number of #GstPollFD in @set that have activity or 0 when no
* activity was detected after @timeout. If an error occurs, -1 is returned
* and errno is set.
*/
gint
gst_poll_wait (GstPoll * set, GstClockTime timeout)
{
gboolean restarting;
gboolean is_timer;
int res;
gint old_waiting;
g_return_val_if_fail (set != NULL, -1);
GST_DEBUG ("%p: timeout :%" GST_TIME_FORMAT, set, GST_TIME_ARGS (timeout));
2009-10-12 08:07:03 +00:00
is_timer = set->timer;
/* add one more waiter */
old_waiting = INC_WAITING (set);
/* we cannot wait from multiple threads unless we are a timer */
if (G_UNLIKELY (old_waiting > 0 && !is_timer))
goto already_waiting;
/* flushing, exit immediately */
if (G_UNLIKELY (IS_FLUSHING (set)))
goto flushing;
do {
GstPollMode mode;
res = -1;
restarting = FALSE;
mode = choose_mode (set, timeout);
if (TEST_REBUILD (set)) {
2012-01-19 08:27:04 +00:00
g_mutex_lock (&set->lock);
#ifndef G_OS_WIN32
g_array_set_size (set->active_fds, set->fds->len);
memcpy (set->active_fds->data, set->fds->data,
set->fds->len * sizeof (struct pollfd));
#else
if (!gst_poll_prepare_winsock_active_sets (set))
goto winsock_error;
#endif
2012-01-19 08:27:04 +00:00
g_mutex_unlock (&set->lock);
}
switch (mode) {
case GST_POLL_MODE_AUTO:
g_assert_not_reached ();
break;
case GST_POLL_MODE_PPOLL:
{
#ifdef HAVE_PPOLL
struct timespec ts;
struct timespec *tsptr;
if (timeout != GST_CLOCK_TIME_NONE) {
GST_TIME_TO_TIMESPEC (timeout, ts);
tsptr = &ts;
} else {
tsptr = NULL;
}
res =
ppoll ((struct pollfd *) set->active_fds->data,
set->active_fds->len, tsptr, NULL);
#else
g_assert_not_reached ();
errno = ENOSYS;
#endif
break;
}
case GST_POLL_MODE_POLL:
{
#ifdef HAVE_POLL
gint t;
if (timeout != GST_CLOCK_TIME_NONE) {
t = GST_TIME_AS_MSECONDS (timeout);
} else {
t = -1;
}
res =
poll ((struct pollfd *) set->active_fds->data,
set->active_fds->len, t);
#else
g_assert_not_reached ();
errno = ENOSYS;
#endif
break;
}
case GST_POLL_MODE_PSELECT:
#ifndef HAVE_PSELECT
{
g_assert_not_reached ();
errno = ENOSYS;
break;
}
#endif
case GST_POLL_MODE_SELECT:
{
#ifndef G_OS_WIN32
fd_set readfds;
fd_set writefds;
fd_set errorfds;
gint max_fd;
max_fd = pollfd_to_fd_set (set, &readfds, &writefds, &errorfds);
if (mode == GST_POLL_MODE_SELECT) {
struct timeval tv;
struct timeval *tvptr;
if (timeout != GST_CLOCK_TIME_NONE) {
GST_TIME_TO_TIMEVAL (timeout, tv);
tvptr = &tv;
} else {
tvptr = NULL;
}
GST_DEBUG ("%p: Calling select", set);
res = select (max_fd + 1, &readfds, &writefds, &errorfds, tvptr);
GST_DEBUG ("%p: After select, res:%d", set, res);
} else {
#ifdef HAVE_PSELECT
struct timespec ts;
struct timespec *tsptr;
if (timeout != GST_CLOCK_TIME_NONE) {
GST_TIME_TO_TIMESPEC (timeout, ts);
tsptr = &ts;
} else {
tsptr = NULL;
}
GST_DEBUG ("%p: Calling pselect", set);
res =
pselect (max_fd + 1, &readfds, &writefds, &errorfds, tsptr, NULL);
GST_DEBUG ("%p: After pselect, res:%d", set, res);
#endif
}
if (res >= 0) {
fd_set_to_pollfd (set, &readfds, &writefds, &errorfds);
}
#else /* G_OS_WIN32 */
g_assert_not_reached ();
errno = ENOSYS;
#endif
break;
}
case GST_POLL_MODE_WINDOWS:
{
#ifdef G_OS_WIN32
gint ignore_count = set->active_fds_ignored->len;
DWORD t, wait_ret;
if (G_LIKELY (ignore_count == 0)) {
if (timeout != GST_CLOCK_TIME_NONE)
t = GST_TIME_AS_MSECONDS (timeout);
else
t = INFINITE;
} else {
/* already one or more ignored fds, so we quickly sweep the others */
t = 0;
}
if (set->active_events->len != 0) {
wait_ret = WSAWaitForMultipleEvents (set->active_events->len,
(HANDLE *) set->active_events->data, FALSE, t, FALSE);
} else {
wait_ret = WSA_WAIT_FAILED;
WSASetLastError (WSA_INVALID_PARAMETER);
}
if (ignore_count == 0 && wait_ret == WSA_WAIT_TIMEOUT) {
res = 0;
} else if (wait_ret == WSA_WAIT_FAILED) {
res = -1;
errno = gst_poll_winsock_error_to_errno (WSAGetLastError ());
} else {
/* the first entry is the wakeup event */
if (wait_ret - WSA_WAIT_EVENT_0 >= 1) {
res = gst_poll_collect_winsock_events (set);
} else {
res = 1; /* wakeup event */
}
}
#else
g_assert_not_reached ();
errno = ENOSYS;
#endif
break;
}
}
if (!is_timer) {
/* Applications needs to clear the control socket themselves for timer
* polls.
* For other polls, we need to clear the control socket. If there was only
* one socket with activity and it was the control socket, we need to
* restart */
if (release_all_wakeup (set) > 0 && res == 1)
restarting = TRUE;
}
2011-07-25 13:21:21 +00:00
/* we got woken up and we are flushing, we need to stop */
if (G_UNLIKELY (IS_FLUSHING (set)))
goto flushing;
} while (G_UNLIKELY (restarting));
DEC_WAITING (set);
return res;
/* ERRORS */
already_waiting:
{
2011-07-25 13:21:21 +00:00
GST_LOG ("%p: we are already waiting", set);
DEC_WAITING (set);
errno = EPERM;
return -1;
}
flushing:
{
2011-07-25 13:21:21 +00:00
GST_LOG ("%p: we are flushing", set);
DEC_WAITING (set);
errno = EBUSY;
return -1;
}
#ifdef G_OS_WIN32
winsock_error:
{
2011-07-25 13:21:21 +00:00
GST_LOG ("%p: winsock error", set);
2012-01-19 08:27:04 +00:00
g_mutex_unlock (&set->lock);
DEC_WAITING (set);
return -1;
}
#endif
}
/**
* gst_poll_set_controllable:
* @set: a #GstPoll.
* @controllable: new controllable state.
*
* When @controllable is %TRUE, this function ensures that future calls to
* gst_poll_wait() will be affected by gst_poll_restart() and
* gst_poll_set_flushing().
*
* This function only works for non-timer #GstPoll objects created with
* gst_poll_new().
*
* Returns: %TRUE if the controllability of @set could be updated.
*/
gboolean
gst_poll_set_controllable (GstPoll * set, gboolean controllable)
{
g_return_val_if_fail (set != NULL, FALSE);
g_return_val_if_fail (!set->timer, FALSE);
GST_LOG ("%p: controllable : %d", set, controllable);
2009-10-12 08:07:03 +00:00
set->controllable = controllable;
return TRUE;
}
/**
* gst_poll_restart:
* @set: a #GstPoll.
*
* Restart any gst_poll_wait() that is in progress. This function is typically
* used after adding or removing descriptors to @set.
*
* If @set is not controllable, then this call will have no effect.
*
* This function only works for non-timer #GstPoll objects created with
* gst_poll_new().
*/
void
gst_poll_restart (GstPoll * set)
{
g_return_if_fail (set != NULL);
g_return_if_fail (!set->timer);
if (set->controllable && GET_WAITING (set) > 0) {
/* we are controllable and waiting, wake up the waiter. The socket will be
* cleared by the _wait() thread and the poll will be restarted */
raise_wakeup (set);
}
}
/**
* gst_poll_set_flushing:
* @set: a #GstPoll.
* @flushing: new flushing state.
*
* When @flushing is %TRUE, this function ensures that current and future calls
* to gst_poll_wait() will return -1, with errno set to EBUSY.
*
* Unsetting the flushing state will restore normal operation of @set.
*
* This function only works for non-timer #GstPoll objects created with
* gst_poll_new().
*/
void
gst_poll_set_flushing (GstPoll * set, gboolean flushing)
{
g_return_if_fail (set != NULL);
g_return_if_fail (!set->timer);
2011-07-25 13:21:21 +00:00
GST_LOG ("%p: flushing: %d", set, flushing);
/* update the new state first */
SET_FLUSHING (set, flushing);
if (flushing && set->controllable && GET_WAITING (set) > 0) {
/* we are flushing, controllable and waiting, wake up the waiter. When we
* stop the flushing operation we don't clear the wakeup fd here, this will
* happen in the _wait() thread. */
raise_wakeup (set);
}
}
/**
* gst_poll_write_control:
* @set: a #GstPoll.
*
* Write a byte to the control socket of the controllable @set.
* This function is mostly useful for timer #GstPoll objects created with
* gst_poll_new_timer().
*
* It will make any current and future gst_poll_wait() function return with
* 1, meaning the control socket is set. After an equal amount of calls to
* gst_poll_read_control() have been performed, calls to gst_poll_wait() will
* block again until their timeout expired.
*
* This function only works for timer #GstPoll objects created with
* gst_poll_new_timer().
*
* Returns: %TRUE on success. %FALSE when when the byte could not be written.
* errno contains the detailed error code but will never be EAGAIN, EINTR or
* EWOULDBLOCK. %FALSE always signals a critical error.
*/
gboolean
gst_poll_write_control (GstPoll * set)
{
gboolean res;
g_return_val_if_fail (set != NULL, FALSE);
g_return_val_if_fail (set->timer, FALSE);
res = raise_wakeup (set);
return res;
}
/**
* gst_poll_read_control:
* @set: a #GstPoll.
*
* Read a byte from the control socket of the controllable @set.
*
* This function only works for timer #GstPoll objects created with
* gst_poll_new_timer().
*
* Returns: %TRUE on success. %FALSE when when there was no byte to read or
* reading the byte failed. If there was no byte to read, and only then, errno
* will contain EWOULDBLOCK or EAGAIN. For all other values of errno this always signals a
* critical error.
*/
gboolean
gst_poll_read_control (GstPoll * set)
{
gboolean res;
g_return_val_if_fail (set != NULL, FALSE);
g_return_val_if_fail (set->timer, FALSE);
res = release_wakeup (set);
return res;
}