gstreamer/gst/rawparse/gstrawbaseparse.c

786 lines
29 KiB
C
Raw Normal View History

/* GStreamer
* Copyright (C) <2016> Carlos Rafael Giani <dv at pseudoterminal dot org>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the
* Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
* Boston, MA 02110-1301, USA.
*/
/**
* SECTION:gstrawbaseparse
* @short_description: Base class for raw media data parsers
*
* This base class is for parsers which read raw media data and output
* timestamped buffers with an integer number of frames inside.
*
* The format of the raw media data is specified in one of two ways: either,
* the information from the sink pad's caps is taken, or the information from
* the properties is used (this is chosen by the use-sink-caps property).
* These two ways are internally referred to as "configurations". The configuration
* that receives its information from the sink pad's caps is called the
* "sink caps configuration", while the one that depends on the information from
* the properties is the "properties configuration". Configurations have a
* "readiness". A configuration is "ready" when it contains valid information.
* For example, with an audio parser, a configuration is not ready unless it
* contains a valid sample rate, sample format, and channel count.
*
* The properties configuration must always be ready, even right from the start.
* Subclasses must ensure this. The underlying reason is that properties have valid
* values right from the start, and with the properties configuration, there is
* nothing that readies it before actual data is sent (unlike with the sink caps
* configuration, where a sink caps event will ready it before data is pushed
* downstream).
*
* It is possible to switch between the configurations during a stream by
* setting the use-sink-caps property. Subclasses typically allow for updating the
* properties configuration during a stream by setting the various properties
* (like sample-rate for a raw audio parser).
* In these cases, the parser will produce a new CAPS event and push it downstream
* to announce the caps for the new configuration. This also happens if the sink
* caps change.
*
* A common mistake when trying to parse raw data with no input caps (for example,
* a file with raw PCM samples when using rawaudioparse) is to forget to set the
* use-sink-caps property to FALSE. In this case, the parser will report an error
* when it tries to access the current configuration (because then the sink caps
* configuration will be the current one and it will not contain valid values
* since no sink caps were seen at this point).
*
* Subclasses must ensure that the properties configuration is the default one.
*
* The sink caps configuration is mostly useful with push-based sources, because these
* will produce caps events and send them downstream. With pull-based sources, it is
* possible that this doesn't happen. Since the sink caps configuration requires a caps
* event to arrive at the sinkpad, this will cause the parser to fail then.
*
* The base class identifies the configurations by means of the GstRawAudioParseConfig
* enum. It instructs the subclass to switch between configurations this way, and
* also requests information about the current configuration, a configuration's
* frame size, its readiness, etc. Subclasses are not required to use any particular
* structure for the configuration implementations.
*
* Use the GST_RAW_BASE_PARSE_CONFIG_MUTEX_LOCK and GST_RAW_BASE_PARSE_CONFIG_MUTEX_UNLOCK
* macros to protect configuration modifications.
*
2019-05-29 23:12:59 +00:00
* ## Summary of the subclass requirements
*
* * Sink caps and properties configurations must both be
* implemented and supported. It must also be ensured that there is a
* "current" configuration.
*
* * Modifications to the configurations must be protected with the
* GstRawBaseParse lock. This is typically necessary when the
* properties configuration is modified by setting new property values.
* (Note that the lock is held during *all* vfunc calls.)
*
* * If the properties configuration is updated (typically by
* setting new property values), gst_raw_base_parse_invalidate_src_caps()
* must be called if the properties config is the current one. This is
* necessary to ensure that GstBaseParse pushes a new caps event downstream
* which contains caps from the updated configuration.
*
* * In case there are bytes in each frame that aren't part of the actual
* payload, the get_overhead_size() vfunc must be defined, and the
* @get_config_frame_size() vfunc must return a frame size that includes
* the number of non-payload bytes (= the overhead). Otherwise, the
* timestamps will incorrectly include the overhead bytes.
*/
#ifdef HAVE_CONFIG_H
# include "config.h"
#endif
#include <string.h>
#include "gstrawbaseparse.h"
GST_DEBUG_CATEGORY_STATIC (raw_base_parse_debug);
#define GST_CAT_DEFAULT raw_base_parse_debug
enum
{
PROP_0,
PROP_USE_SINK_CAPS
};
#define DEFAULT_USE_SINK_CAPS FALSE
#define INITIAL_PARSER_CONFIG \
((DEFAULT_USE_SINK_CAPS) ? GST_RAW_BASE_PARSE_CONFIG_SINKCAPS : \
GST_RAW_BASE_PARSE_CONFIG_PROPERTIES)
#define gst_raw_base_parse_parent_class parent_class
G_DEFINE_ABSTRACT_TYPE (GstRawBaseParse, gst_raw_base_parse,
GST_TYPE_BASE_PARSE);
static void gst_raw_base_parse_finalize (GObject * object);
static void gst_raw_base_parse_set_property (GObject * object, guint prop_id,
GValue const *value, GParamSpec * pspec);
static void gst_raw_base_parse_get_property (GObject * object, guint prop_id,
GValue * value, GParamSpec * pspec);
static gboolean gst_raw_base_parse_start (GstBaseParse * parse);
static gboolean gst_raw_base_parse_stop (GstBaseParse * parse);
static gboolean gst_raw_base_parse_set_sink_caps (GstBaseParse * parse,
GstCaps * caps);
static GstFlowReturn gst_raw_base_parse_handle_frame (GstBaseParse * parse,
GstBaseParseFrame * frame, gint * skipsize);
static gboolean gst_raw_base_parse_convert (GstBaseParse * parse,
GstFormat src_format, gint64 src_value, GstFormat dest_format,
gint64 * dest_value);
static gboolean gst_raw_base_parse_is_using_sink_caps (GstRawBaseParse *
raw_base_parse);
static gboolean gst_raw_base_parse_is_gstformat_supported (GstRawBaseParse *
raw_base_parse, GstFormat format);
static void
gst_raw_base_parse_class_init (GstRawBaseParseClass * klass)
{
GObjectClass *object_class;
GstBaseParseClass *baseparse_class;
GST_DEBUG_CATEGORY_INIT (raw_base_parse_debug, "rawbaseparse", 0,
"raw base parse class");
object_class = G_OBJECT_CLASS (klass);
baseparse_class = GST_BASE_PARSE_CLASS (klass);
object_class->finalize = GST_DEBUG_FUNCPTR (gst_raw_base_parse_finalize);
object_class->set_property =
GST_DEBUG_FUNCPTR (gst_raw_base_parse_set_property);
object_class->get_property =
GST_DEBUG_FUNCPTR (gst_raw_base_parse_get_property);
baseparse_class->start = GST_DEBUG_FUNCPTR (gst_raw_base_parse_start);
baseparse_class->stop = GST_DEBUG_FUNCPTR (gst_raw_base_parse_stop);
baseparse_class->set_sink_caps =
GST_DEBUG_FUNCPTR (gst_raw_base_parse_set_sink_caps);
baseparse_class->handle_frame =
GST_DEBUG_FUNCPTR (gst_raw_base_parse_handle_frame);
baseparse_class->convert = GST_DEBUG_FUNCPTR (gst_raw_base_parse_convert);
/**
* GstRawBaseParse::use-sink-caps:
*
* Use sink caps configuration. If set to false, the parser
* will use the properties configuration instead. It is possible
* to switch between these during playback.
*/
g_object_class_install_property (object_class,
PROP_USE_SINK_CAPS,
g_param_spec_boolean ("use-sink-caps",
"Use sink caps",
"Use the sink caps for defining the output format",
DEFAULT_USE_SINK_CAPS, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)
);
}
static void
gst_raw_base_parse_init (GstRawBaseParse * raw_base_parse)
{
raw_base_parse->src_caps_set = FALSE;
g_mutex_init (&(raw_base_parse->config_mutex));
}
static void
gst_raw_base_parse_finalize (GObject * object)
{
GstRawBaseParse *raw_base_parse = GST_RAW_BASE_PARSE (object);
g_mutex_clear (&(raw_base_parse->config_mutex));
G_OBJECT_CLASS (parent_class)->finalize (object);
}
static void
gst_raw_base_parse_set_property (GObject * object, guint prop_id,
GValue const *value, GParamSpec * pspec)
{
GstBaseParse *base_parse = GST_BASE_PARSE (object);
GstRawBaseParse *raw_base_parse = GST_RAW_BASE_PARSE (object);
GstRawBaseParseClass *klass = GST_RAW_BASE_PARSE_GET_CLASS (object);
g_assert (klass->is_config_ready);
g_assert (klass->set_current_config);
switch (prop_id) {
case PROP_USE_SINK_CAPS:
{
gboolean new_state, cur_state;
GstRawBaseParseConfig new_config;
GST_RAW_BASE_PARSE_CONFIG_MUTEX_LOCK (object);
/* Check to ensure nothing is done if the value stays the same */
new_state = g_value_get_boolean (value);
cur_state = gst_raw_base_parse_is_using_sink_caps (raw_base_parse);
if (new_state == cur_state) {
GST_RAW_BASE_PARSE_CONFIG_MUTEX_UNLOCK (object);
break;
}
GST_DEBUG_OBJECT (raw_base_parse, "switching to %s config",
new_state ? "sink caps" : "properties");
new_config =
new_state ? GST_RAW_BASE_PARSE_CONFIG_SINKCAPS :
GST_RAW_BASE_PARSE_CONFIG_PROPERTIES;
if (!klass->set_current_config (raw_base_parse, new_config)) {
GST_RAW_BASE_PARSE_CONFIG_MUTEX_UNLOCK (object);
GST_ELEMENT_ERROR (raw_base_parse, STREAM, FAILED,
("could not set new current config"), ("use-sink-caps property: %d",
new_state));
break;
}
/* Update the minimum frame size if the config is ready. This ensures that
* the next buffer that is passed to handle_frame contains complete frames.
* If the current config is the properties config, then it will always be
* ready, and its frame size will be valid. Ensure that the baseparse minimum
* frame size is set properly then.
* If the current config is the sink caps config, then it will initially not
* be ready until the sink caps are set, so the minimum frame size cannot be
* set right here. However, since the caps always come in *before* the actual
* data, the config will be readied in the set_sink_caps function, and be ready
* by the time handle_frame is called. There, the minimum frame size is set as
* well. */
if (klass->is_config_ready (raw_base_parse,
GST_RAW_BASE_PARSE_CONFIG_CURRENT)) {
gsize frame_size = klass->get_config_frame_size (raw_base_parse,
GST_RAW_BASE_PARSE_CONFIG_CURRENT);
gst_base_parse_set_min_frame_size (base_parse, frame_size);
}
/* Since the current config was switched, the source caps change. Ensure the
* new caps are pushed downstream by setting src_caps_set to FALSE: This way,
* the next handle_frame call will take care of that. */
raw_base_parse->src_caps_set = FALSE;
GST_RAW_BASE_PARSE_CONFIG_MUTEX_UNLOCK (object);
break;
}
default:
G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
break;
}
}
static void
gst_raw_base_parse_get_property (GObject * object, guint prop_id,
GValue * value, GParamSpec * pspec)
{
GstRawBaseParse *raw_base_parse = GST_RAW_BASE_PARSE (object);
switch (prop_id) {
case PROP_USE_SINK_CAPS:
GST_RAW_BASE_PARSE_CONFIG_MUTEX_LOCK (object);
g_value_set_boolean (value,
gst_raw_base_parse_is_using_sink_caps (raw_base_parse));
GST_RAW_BASE_PARSE_CONFIG_MUTEX_UNLOCK (object);
break;
default:
G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
break;
}
}
static gboolean
gst_raw_base_parse_start (GstBaseParse * parse)
{
GstBaseParse *base_parse = GST_BASE_PARSE (parse);
GstRawBaseParse *raw_base_parse = GST_RAW_BASE_PARSE (parse);
GstRawBaseParseClass *klass = GST_RAW_BASE_PARSE_GET_CLASS (parse);
g_assert (klass->set_current_config);
GST_RAW_BASE_PARSE_CONFIG_MUTEX_LOCK (raw_base_parse);
/* If the config is ready from the start, set the min frame size
* (this will happen with the properties config) */
if (klass->is_config_ready (raw_base_parse,
GST_RAW_BASE_PARSE_CONFIG_CURRENT)) {
gsize frame_size = klass->get_config_frame_size (raw_base_parse,
GST_RAW_BASE_PARSE_CONFIG_CURRENT);
gst_base_parse_set_min_frame_size (base_parse, frame_size);
}
GST_RAW_BASE_PARSE_CONFIG_MUTEX_UNLOCK (raw_base_parse);
return TRUE;
}
static gboolean
gst_raw_base_parse_stop (GstBaseParse * parse)
{
GstRawBaseParse *raw_base_parse = GST_RAW_BASE_PARSE (parse);
GST_RAW_BASE_PARSE_CONFIG_MUTEX_LOCK (raw_base_parse);
raw_base_parse->src_caps_set = FALSE;
GST_RAW_BASE_PARSE_CONFIG_MUTEX_UNLOCK (raw_base_parse);
return TRUE;
}
static gboolean
gst_raw_base_parse_set_sink_caps (GstBaseParse * parse, GstCaps * caps)
{
gboolean ret = FALSE;
GstRawBaseParse *raw_base_parse = GST_RAW_BASE_PARSE (parse);
GstRawBaseParseClass *klass = GST_RAW_BASE_PARSE_GET_CLASS (parse);
g_assert (klass->set_config_from_caps);
g_assert (klass->get_caps_from_config);
g_assert (klass->get_config_frame_size);
GST_RAW_BASE_PARSE_CONFIG_MUTEX_LOCK (raw_base_parse);
GST_DEBUG_OBJECT (parse, "getting config from new sink caps");
/* Convert the new sink caps to sink caps config. This also
* readies the config. */
ret =
klass->set_config_from_caps (raw_base_parse,
GST_RAW_BASE_PARSE_CONFIG_SINKCAPS, caps);
if (!ret) {
GST_ERROR_OBJECT (raw_base_parse, "could not get config from sink caps");
goto done;
}
/* If the sink caps config is currently active, push caps downstream,
* set the minimum frame size (to guarantee that input buffers hold
* complete frames), and update the src_caps_set flag. If the sink
* caps config isn't the currently active config, just exit, since in
* that case, the caps will always be pushed downstream in handle_frame. */
if (gst_raw_base_parse_is_using_sink_caps (raw_base_parse)) {
GstCaps *new_src_caps;
gsize frame_size;
GST_DEBUG_OBJECT (parse,
"sink caps config is the current one; trying to push new caps downstream");
/* Convert back to caps. The caps may have changed, for example
* audio/x-unaligned-raw may have been replaced with audio/x-raw.
* (Also, this keeps the behavior in sync with that of the block
* in handle_frame that pushes caps downstream if not done already.) */
if (!klass->get_caps_from_config (raw_base_parse,
GST_RAW_BASE_PARSE_CONFIG_CURRENT, &new_src_caps)) {
GST_ERROR_OBJECT (raw_base_parse,
"could not get src caps from current config");
goto done;
}
GST_DEBUG_OBJECT (raw_base_parse,
"got new sink caps; updating src caps to %" GST_PTR_FORMAT,
(gpointer) new_src_caps);
frame_size =
klass->get_config_frame_size (raw_base_parse,
GST_RAW_BASE_PARSE_CONFIG_CURRENT);
gst_base_parse_set_min_frame_size (parse, frame_size);
raw_base_parse->src_caps_set = TRUE;
GST_RAW_BASE_PARSE_CONFIG_MUTEX_UNLOCK (raw_base_parse);
/* Push caps outside of the lock */
gst_pad_push_event (GST_BASE_PARSE_SRC_PAD (raw_base_parse),
gst_event_new_caps (new_src_caps)
);
gst_caps_unref (new_src_caps);
} else {
GST_RAW_BASE_PARSE_CONFIG_MUTEX_UNLOCK (raw_base_parse);
}
ret = TRUE;
done:
return ret;
}
static GstBuffer *
gst_raw_base_parse_align_buffer (GstRawBaseParse * raw_base_parse,
gsize alignment, GstBuffer * buffer, gsize out_size)
{
GstMapInfo map;
gst_buffer_map (buffer, &map, GST_MAP_READ);
if (map.size < sizeof (guintptr)) {
gst_buffer_unmap (buffer, &map);
return NULL;
}
if (((guintptr) map.data) & (alignment - 1)) {
GstBuffer *new_buffer;
GstAllocationParams params = { 0, alignment - 1, 0, 0, };
new_buffer = gst_buffer_new_allocate (NULL, out_size, &params);
/* Copy data "by hand", so ensure alignment is kept: */
gst_buffer_fill (new_buffer, 0, map.data, out_size);
gst_buffer_copy_into (new_buffer, buffer, GST_BUFFER_COPY_METADATA, 0,
out_size);
GST_DEBUG_OBJECT (raw_base_parse,
"We want output aligned on %" G_GSIZE_FORMAT ", reallocated",
alignment);
gst_buffer_unmap (buffer, &map);
return new_buffer;
}
gst_buffer_unmap (buffer, &map);
return NULL;
}
static GstFlowReturn
gst_raw_base_parse_handle_frame (GstBaseParse * parse,
GstBaseParseFrame * frame, gint * skipsize)
{
gsize in_size, out_size;
guint frame_size;
guint num_out_frames;
gsize units_n, units_d;
guint64 buffer_duration;
GstFlowReturn flow_ret = GST_FLOW_OK;
GstEvent *new_caps_event = NULL;
gint alignment;
GstRawBaseParse *raw_base_parse = GST_RAW_BASE_PARSE (parse);
GstRawBaseParseClass *klass = GST_RAW_BASE_PARSE_GET_CLASS (parse);
g_assert (klass->is_config_ready);
g_assert (klass->get_caps_from_config);
g_assert (klass->get_config_frame_size);
g_assert (klass->get_units_per_second);
/* We never skip any bytes this way. Instead, subclass takes care
* of skipping any overhead (necessary, since the way it needs to
* be skipped is completely subclass specific). */
*skipsize = 0;
/* The operations below access the current config. Protect
* against race conditions by using the object lock. */
GST_RAW_BASE_PARSE_CONFIG_MUTEX_LOCK (raw_base_parse);
/* If the source pad caps haven't been set yet, or need to be
* set again, do so now, BEFORE any buffers are pushed out */
if (G_UNLIKELY (!raw_base_parse->src_caps_set)) {
GstCaps *new_src_caps;
if (G_UNLIKELY (!klass->is_config_ready (raw_base_parse,
GST_RAW_BASE_PARSE_CONFIG_CURRENT))) {
/* The current configuration is not ready. No caps can be
* generated out of it.
* The most likely reason for this is that the sink caps config
* is the current one and no valid sink caps have been pushed
* by upstream. Report the problem and exit. */
if (gst_raw_base_parse_is_using_sink_caps (raw_base_parse)) {
goto config_not_ready;
} else {
/* This should not be reached if the property config is active */
g_assert_not_reached ();
}
}
GST_DEBUG_OBJECT (parse,
"setting src caps since this has not been done yet");
/* Convert the current config to a caps structure to
* inform downstream about the new format */
if (!klass->get_caps_from_config (raw_base_parse,
GST_RAW_BASE_PARSE_CONFIG_CURRENT, &new_src_caps)) {
GST_ERROR_OBJECT (raw_base_parse,
"could not get src caps from current config");
flow_ret = GST_FLOW_NOT_NEGOTIATED;
goto error_locked;
}
new_caps_event = gst_event_new_caps (new_src_caps);
gst_caps_unref (new_src_caps);
raw_base_parse->src_caps_set = TRUE;
}
frame_size =
klass->get_config_frame_size (raw_base_parse,
GST_RAW_BASE_PARSE_CONFIG_CURRENT);
if (frame_size <= 0) {
GST_ELEMENT_ERROR (parse, STREAM, FORMAT,
("Non strictly positive frame size"), (NULL));
flow_ret = GST_FLOW_ERROR;
goto error_locked;
}
in_size = gst_buffer_get_size (frame->buffer);
/* drop incomplete frame at the end of the stream
* https://bugzilla.gnome.org/show_bug.cgi?id=773666
*/
if (GST_BASE_PARSE_DRAINING (parse) && in_size < frame_size) {
GST_DEBUG_OBJECT (raw_base_parse,
"Dropping %" G_GSIZE_FORMAT " bytes at EOS", in_size);
frame->flags |= GST_BASE_PARSE_FRAME_FLAG_DROP;
GST_RAW_BASE_PARSE_CONFIG_MUTEX_UNLOCK (raw_base_parse);
return gst_base_parse_finish_frame (parse, frame, in_size);
}
/* gst_base_parse_set_min_frame_size() is called when the current
* configuration changes and the change affects the frame size. This
* means that a buffer must contain at least as many bytes as indicated
* by the frame size. If there are fewer inside an error occurred;
* either something in the parser went wrong, or the min frame size
* wasn't updated properly. */
g_assert (in_size >= frame_size);
/* Determine how many complete frames would fit in the input buffer.
* Then check if this amount exceeds the maximum number of frames
* as indicated by the subclass. */
num_out_frames = (in_size / frame_size);
if (klass->get_max_frames_per_buffer) {
guint max_num_out_frames = klass->get_max_frames_per_buffer (raw_base_parse,
GST_RAW_BASE_PARSE_CONFIG_CURRENT);
num_out_frames = MIN (num_out_frames, max_num_out_frames);
}
/* Ensure that the size of the buffers that get pushed downstream
* is always an integer multiple of the frame size to prevent cases
* where downstream gets buffers with incomplete frames. */
out_size = num_out_frames * frame_size;
/* Set the overhead size to ensure that timestamping excludes these
* extra overhead bytes. */
frame->overhead =
klass->get_overhead_size ? klass->get_overhead_size (raw_base_parse,
GST_RAW_BASE_PARSE_CONFIG_CURRENT) : 0;
g_assert (out_size >= (guint) (frame->overhead));
out_size -= frame->overhead;
GST_LOG_OBJECT (raw_base_parse,
"%" G_GSIZE_FORMAT " bytes input %" G_GSIZE_FORMAT
" bytes output (%u frame(s)) %d bytes overhead", in_size, out_size,
num_out_frames, frame->overhead);
/* Calculate buffer duration */
klass->get_units_per_second (raw_base_parse, GST_FORMAT_BYTES,
GST_RAW_BASE_PARSE_CONFIG_CURRENT, &units_n, &units_d);
if (units_n == 0 || units_d == 0)
buffer_duration = GST_CLOCK_TIME_NONE;
else
buffer_duration =
gst_util_uint64_scale (out_size, GST_SECOND * units_d, units_n);
if (klass->process) {
GstBuffer *processed_data = NULL;
if (!klass->process (raw_base_parse, GST_RAW_BASE_PARSE_CONFIG_CURRENT,
frame->buffer, in_size, out_size, &processed_data))
goto process_error;
frame->out_buffer = processed_data;
} else {
frame->out_buffer = NULL;
}
if (klass->get_alignment
&& (alignment =
klass->get_alignment (raw_base_parse,
GST_RAW_BASE_PARSE_CONFIG_CURRENT)) != 1) {
GstBuffer *aligned_buffer;
aligned_buffer =
gst_raw_base_parse_align_buffer (raw_base_parse, alignment,
frame->out_buffer ? frame->out_buffer : frame->buffer, out_size);
if (aligned_buffer) {
if (frame->out_buffer)
gst_buffer_unref (frame->out_buffer);
frame->out_buffer = aligned_buffer;
}
}
/* Set the duration of the output buffer, or if none exists, of
* the input buffer. Do this after the process() call, since in
* case out_buffer is set, the subclass has created a new buffer.
* Instead of requiring subclasses to set the duration (which
* anyway must always be buffer_duration), let's do it here. */
if (frame->out_buffer != NULL)
GST_BUFFER_DURATION (frame->out_buffer) = buffer_duration;
else
GST_BUFFER_DURATION (frame->buffer) = buffer_duration;
/* Access to the current config is not needed in subsequent
* operations, so the lock can be released */
GST_RAW_BASE_PARSE_CONFIG_MUTEX_UNLOCK (raw_base_parse);
/* If any new caps have to be pushed downstrean, do so
* *before* the frame is finished */
if (G_UNLIKELY (new_caps_event != NULL)) {
gst_pad_push_event (GST_BASE_PARSE_SRC_PAD (raw_base_parse),
new_caps_event);
new_caps_event = NULL;
}
flow_ret =
gst_base_parse_finish_frame (parse, frame, out_size + frame->overhead);
return flow_ret;
config_not_ready:
GST_RAW_BASE_PARSE_CONFIG_MUTEX_UNLOCK (raw_base_parse);
GST_ELEMENT_ERROR (parse, STREAM, FORMAT,
("sink caps config is the current config, and it is not ready -"
"upstream may not have pushed a caps event yet"), (NULL));
flow_ret = GST_FLOW_ERROR;
goto error_end;
process_error:
GST_RAW_BASE_PARSE_CONFIG_MUTEX_UNLOCK (raw_base_parse);
GST_ELEMENT_ERROR (parse, STREAM, DECODE, ("could not process data"), (NULL));
flow_ret = GST_FLOW_ERROR;
goto error_end;
error_locked:
GST_RAW_BASE_PARSE_CONFIG_MUTEX_UNLOCK (raw_base_parse);
goto error_end;
error_end:
frame->flags |= GST_BASE_PARSE_FRAME_FLAG_DROP;
if (new_caps_event != NULL)
gst_event_unref (new_caps_event);
return flow_ret;
}
static gboolean
gst_raw_base_parse_convert (GstBaseParse * parse, GstFormat src_format,
gint64 src_value, GstFormat dest_format, gint64 * dest_value)
{
GstRawBaseParse *raw_base_parse = GST_RAW_BASE_PARSE (parse);
GstRawBaseParseClass *klass = GST_RAW_BASE_PARSE_GET_CLASS (parse);
gboolean ret = TRUE;
gsize units_n, units_d;
g_assert (klass->is_config_ready);
g_assert (klass->get_units_per_second);
/* The operations below access the current config. Protect
* against race conditions by using the object lock. */
GST_RAW_BASE_PARSE_CONFIG_MUTEX_LOCK (raw_base_parse);
if (!klass->is_config_ready (raw_base_parse,
GST_RAW_BASE_PARSE_CONFIG_CURRENT)) {
if (gst_raw_base_parse_is_using_sink_caps (raw_base_parse)) {
goto config_not_ready;
} else {
/* This should not be reached if the property config is active */
g_assert_not_reached ();
}
}
if (G_UNLIKELY (src_format == dest_format)) {
*dest_value = src_value;
} else if ((src_format == GST_FORMAT_TIME || dest_format == GST_FORMAT_TIME)
&& gst_raw_base_parse_is_gstformat_supported (raw_base_parse, src_format)
&& gst_raw_base_parse_is_gstformat_supported (raw_base_parse, src_format)) {
/* Perform conversions here if either the src or dest format
* are GST_FORMAT_TIME and the other format is supported by
* the subclass. This is because we perform TIME<->non-TIME
* conversions here. Typically, subclasses only support
* BYTES and DEFAULT formats. */
if (src_format == GST_FORMAT_TIME) {
/* The source format is time, so perform a TIME -> non-TIME conversion */
klass->get_units_per_second (raw_base_parse, dest_format,
GST_RAW_BASE_PARSE_CONFIG_CURRENT, &units_n, &units_d);
*dest_value = (units_n == 0
|| units_d == 0) ? src_value : gst_util_uint64_scale (src_value,
units_n, GST_SECOND * units_d);
} else {
/* The dest format is time, so perform a non-TIME -> TIME conversion */
klass->get_units_per_second (raw_base_parse, src_format,
GST_RAW_BASE_PARSE_CONFIG_CURRENT, &units_n, &units_d);
*dest_value = (units_n == 0
|| units_d == 0) ? src_value : gst_util_uint64_scale (src_value,
GST_SECOND * units_d, units_n);
}
} else {
/* Fallback for other conversions */
ret =
gst_base_parse_convert_default (parse, src_format, src_value,
dest_format, dest_value);
}
GST_DEBUG_OBJECT (parse,
"converted %s -> %s %" G_GINT64_FORMAT " -> %" GST_TIME_FORMAT,
gst_format_get_name (src_format), gst_format_get_name (dest_format),
src_value, GST_TIME_ARGS (*dest_value));
GST_RAW_BASE_PARSE_CONFIG_MUTEX_UNLOCK (raw_base_parse);
return ret;
config_not_ready:
GST_RAW_BASE_PARSE_CONFIG_MUTEX_UNLOCK (raw_base_parse);
GST_ELEMENT_ERROR (parse, STREAM, FORMAT,
("sink caps config is the current config, and it is not ready - "
"upstream may not have pushed a caps event yet"), (NULL));
return FALSE;
}
static gboolean
gst_raw_base_parse_is_using_sink_caps (GstRawBaseParse * raw_base_parse)
{
/* must be called with lock */
GstRawBaseParseClass *klass = GST_RAW_BASE_PARSE_GET_CLASS (raw_base_parse);
g_assert (klass->get_current_config);
return klass->get_current_config (raw_base_parse) ==
GST_RAW_BASE_PARSE_CONFIG_SINKCAPS;
}
static gboolean
gst_raw_base_parse_is_gstformat_supported (GstRawBaseParse * raw_base_parse,
GstFormat format)
{
/* must be called with lock */
GstRawBaseParseClass *klass = GST_RAW_BASE_PARSE_GET_CLASS (raw_base_parse);
g_assert (klass->is_unit_format_supported);
return klass->is_unit_format_supported (raw_base_parse, format);
}
/**
* gst_raw_base_parse_invalidate_src_caps:
* @raw_base_parse: a #GstRawBaseParse instance
*
* Flags the current source caps as invalid. Before the next downstream
* buffer push, @get_caps_from_config is called, and the created caps are
* pushed downstream in a new caps event, This is used if for example the
* properties configuration is modified in the subclass.
*
* Note that this must be called with the parser lock held. Use the
* GST_RAW_BASE_PARSE_CONFIG_MUTEX_LOCK() and GST_RAW_BASE_PARSE_CONFIG_MUTEX_UNLOCK()
* macros for this purpose.
*/
void
gst_raw_base_parse_invalidate_src_caps (GstRawBaseParse * raw_base_parse)
{
/* must be called with lock */
g_assert (raw_base_parse != NULL);
raw_base_parse->src_caps_set = FALSE;
}