gstreamer/sys/winks/gstksvideosrc.c

1004 lines
29 KiB
C
Raw Normal View History

/*
* Copyright (C) 2008 Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the
* Free Software Foundation, Inc., 59 Temple Place - Suite 330,
* Boston, MA 02111-1307, USA.
*/
/**
* SECTION:element-ksvideosrc
*
* Provides low-latency video capture from WDM cameras on Windows.
*
* <refsect2>
* <title>Example pipelines</title>
* |[
* gst-launch -v ksvideosrc do-stats=TRUE ! ffmpegcolorspace ! dshowvideosink
* ]| Capture from a camera and render using dshowvideosink.
* |[
* gst-launch -v ksvideosrc do-stats=TRUE ! image/jpeg, width=640, height=480
* ! jpegdec ! ffmpegcolorspace ! dshowvideosink
* ]| Capture from an MJPEG camera and render using dshowvideosink.
* </refsect2>
*/
#ifdef HAVE_CONFIG_H
# include <config.h>
#endif
#include "gstksvideosrc.h"
#include "gstksclock.h"
#include "gstksvideodevice.h"
#include "kshelpers.h"
#include "ksvideohelpers.h"
#define DEFAULT_DEVICE_PATH NULL
#define DEFAULT_DEVICE_NAME NULL
#define DEFAULT_DEVICE_INDEX -1
#define DEFAULT_DO_STATS FALSE
#define DEFAULT_ENABLE_QUIRKS TRUE
enum
{
PROP_0,
PROP_DEVICE_PATH,
PROP_DEVICE_NAME,
PROP_DEVICE_INDEX,
PROP_DO_STATS,
PROP_FPS,
PROP_ENABLE_QUIRKS,
};
GST_DEBUG_CATEGORY (gst_ks_debug);
#define GST_CAT_DEFAULT gst_ks_debug
sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video... Original commit message from CVS: * sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video_device_create_pin, gst_ks_video_device_set_state, gst_ks_video_device_request_frame, gst_ks_video_device_read_frame): Guard against capturing old frames by keeping track of the last timestamp and also zero-fill the buffers before each capture. Only assign a master clock if the pin hasn't already got one. Actually free buffers on the way down to avoid a huge memory leak, as this was previously done when changing state to ACQUIRE downwards and we now skip that state on the way down. Add some debug. * sys/winks/gstksvideosrc.c (DEFAULT_DEVICE_PATH, DEFAULT_DEVICE_NAME, DEFAULT_DEVICE_INDEX, KS_WORKER_LOCK, KS_WORKER_UNLOCK, KS_WORKER_WAIT, KS_WORKER_NOTIFY, KS_WORKER_WAIT_FOR_RESULT, KS_WORKER_NOTIFY_RESULT, KS_WORKER_STATE_STARTING, KS_WORKER_STATE_READY, KS_WORKER_STATE_STOPPING, KS_WORKER_STATE_ERROR, KsWorkerState, device_path, device_name, device_index, running, worker_thread, worker_lock, worker_notify_cond, worker_result_cond, worker_state, worker_pending_caps, worker_setcaps_result, worker_pending_run, worker_run_result, gst_ks_video_src_reset, gst_ks_video_src_apply_driver_quirks, gst_ks_video_src_open_device, gst_ks_video_src_close_device, gst_ks_video_src_worker_func, gst_ks_video_src_start_worker, gst_ks_video_src_stop_worker, gst_ks_video_src_change_state, gst_ks_video_src_set_clock, gst_ks_video_src_set_caps, gst_ks_video_src_timestamp_buffer, gst_ks_video_src_create): Remove ENABLE_CLOCK_DEBUG define, it's GST_LEVEL_DEBUG after all. Get rid of PROP_ENSLAVE_KSCLOCK and always slave the ks clock to the GStreamer clock, it doesn't seem to hurt and matches DirectShow's behavior. As an added bonus we usually get PresentationTime set for each frame, so we can expand on this later for smarter latency reporting (by looking at the diff between the timestamp from the driver and the time according to the GStreamer clock). Use an internal worker thread for opening the device, setting caps, changing its state and closing it. This way we're a lot more compatible with drivers that rely on hacks to do video-effects between the low-level NT API and the application. Ick. Start the ks clock and set the pin to KSSTATE_RUN on the first create() so that we'll hopefully get hold of the GStreamer clock from the very beginning. This way there's no chance that the timestamps will make a sudden jump in the beginning of the stream when we're running with a clock. * sys/winks/kshelpers.c (CHECK_OPTIONS_FLAG, ks_options_flags_to_string): Reorder the flags to match the headerfile order, and make the string a bit more compact. * sys/winks/ksvideohelpers.c (ks_video_probe_filter_for_caps): Avoid leaking KSPROPERTY_PIN_DATARANGES.
2008-09-09 23:58:02 +00:00
#define KS_WORKER_LOCK(priv) g_mutex_lock (priv->worker_lock)
#define KS_WORKER_UNLOCK(priv) g_mutex_unlock (priv->worker_lock)
#define KS_WORKER_WAIT(priv) \
g_cond_wait (priv->worker_notify_cond, priv->worker_lock)
#define KS_WORKER_NOTIFY(priv) g_cond_signal (priv->worker_notify_cond)
#define KS_WORKER_WAIT_FOR_RESULT(priv) \
g_cond_wait (priv->worker_result_cond, priv->worker_lock)
#define KS_WORKER_NOTIFY_RESULT(priv) \
g_cond_signal (priv->worker_result_cond)
typedef enum
{
KS_WORKER_STATE_STARTING,
KS_WORKER_STATE_READY,
KS_WORKER_STATE_STOPPING,
KS_WORKER_STATE_ERROR,
} KsWorkerState;
typedef struct
{
/* Properties */
gchar *device_path;
gchar *device_name;
gint device_index;
gboolean do_stats;
gboolean enable_quirks;
/* State */
GstKsClock *ksclock;
GstKsVideoDevice *device;
guint64 offset;
GstClockTime prev_ts;
sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video... Original commit message from CVS: * sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video_device_create_pin, gst_ks_video_device_set_state, gst_ks_video_device_request_frame, gst_ks_video_device_read_frame): Guard against capturing old frames by keeping track of the last timestamp and also zero-fill the buffers before each capture. Only assign a master clock if the pin hasn't already got one. Actually free buffers on the way down to avoid a huge memory leak, as this was previously done when changing state to ACQUIRE downwards and we now skip that state on the way down. Add some debug. * sys/winks/gstksvideosrc.c (DEFAULT_DEVICE_PATH, DEFAULT_DEVICE_NAME, DEFAULT_DEVICE_INDEX, KS_WORKER_LOCK, KS_WORKER_UNLOCK, KS_WORKER_WAIT, KS_WORKER_NOTIFY, KS_WORKER_WAIT_FOR_RESULT, KS_WORKER_NOTIFY_RESULT, KS_WORKER_STATE_STARTING, KS_WORKER_STATE_READY, KS_WORKER_STATE_STOPPING, KS_WORKER_STATE_ERROR, KsWorkerState, device_path, device_name, device_index, running, worker_thread, worker_lock, worker_notify_cond, worker_result_cond, worker_state, worker_pending_caps, worker_setcaps_result, worker_pending_run, worker_run_result, gst_ks_video_src_reset, gst_ks_video_src_apply_driver_quirks, gst_ks_video_src_open_device, gst_ks_video_src_close_device, gst_ks_video_src_worker_func, gst_ks_video_src_start_worker, gst_ks_video_src_stop_worker, gst_ks_video_src_change_state, gst_ks_video_src_set_clock, gst_ks_video_src_set_caps, gst_ks_video_src_timestamp_buffer, gst_ks_video_src_create): Remove ENABLE_CLOCK_DEBUG define, it's GST_LEVEL_DEBUG after all. Get rid of PROP_ENSLAVE_KSCLOCK and always slave the ks clock to the GStreamer clock, it doesn't seem to hurt and matches DirectShow's behavior. As an added bonus we usually get PresentationTime set for each frame, so we can expand on this later for smarter latency reporting (by looking at the diff between the timestamp from the driver and the time according to the GStreamer clock). Use an internal worker thread for opening the device, setting caps, changing its state and closing it. This way we're a lot more compatible with drivers that rely on hacks to do video-effects between the low-level NT API and the application. Ick. Start the ks clock and set the pin to KSSTATE_RUN on the first create() so that we'll hopefully get hold of the GStreamer clock from the very beginning. This way there's no chance that the timestamps will make a sudden jump in the beginning of the stream when we're running with a clock. * sys/winks/kshelpers.c (CHECK_OPTIONS_FLAG, ks_options_flags_to_string): Reorder the flags to match the headerfile order, and make the string a bit more compact. * sys/winks/ksvideohelpers.c (ks_video_probe_filter_for_caps): Avoid leaking KSPROPERTY_PIN_DATARANGES.
2008-09-09 23:58:02 +00:00
gboolean running;
/* Worker thread */
GThread *worker_thread;
GMutex *worker_lock;
GCond *worker_notify_cond;
GCond *worker_result_cond;
KsWorkerState worker_state;
GstCaps *worker_pending_caps;
gboolean worker_setcaps_result;
gboolean worker_pending_run;
gboolean worker_run_result;
/* Statistics */
GstClockTime last_sampling;
guint count;
guint fps;
} GstKsVideoSrcPrivate;
#define GST_KS_VIDEO_SRC_GET_PRIVATE(o) \
(G_TYPE_INSTANCE_GET_PRIVATE ((o), GST_TYPE_KS_VIDEO_SRC, \
GstKsVideoSrcPrivate))
static void gst_ks_video_src_finalize (GObject * object);
static void gst_ks_video_src_get_property (GObject * object, guint prop_id,
GValue * value, GParamSpec * pspec);
static void gst_ks_video_src_set_property (GObject * object, guint prop_id,
const GValue * value, GParamSpec * pspec);
static void gst_ks_video_src_reset (GstKsVideoSrc * self);
static GstStateChangeReturn gst_ks_video_src_change_state (GstElement * element,
GstStateChange transition);
static gboolean gst_ks_video_src_set_clock (GstElement * element,
GstClock * clock);
static GstCaps *gst_ks_video_src_get_caps (GstBaseSrc * basesrc);
static gboolean gst_ks_video_src_set_caps (GstBaseSrc * basesrc,
GstCaps * caps);
static void gst_ks_video_src_fixate (GstBaseSrc * basesrc, GstCaps * caps);
static gboolean gst_ks_video_src_query (GstBaseSrc * basesrc, GstQuery * query);
static gboolean gst_ks_video_src_unlock (GstBaseSrc * basesrc);
static gboolean gst_ks_video_src_unlock_stop (GstBaseSrc * basesrc);
static GstFlowReturn gst_ks_video_src_create (GstPushSrc * pushsrc,
GstBuffer ** buffer);
GST_BOILERPLATE (GstKsVideoSrc, gst_ks_video_src, GstPushSrc,
GST_TYPE_PUSH_SRC);
static void
gst_ks_video_src_base_init (gpointer gclass)
{
GstElementClass *element_class = GST_ELEMENT_CLASS (gclass);
gst_element_class_set_details (element_class, "KsVideoSrc",
"Source/Video",
"Stream data from a video capture device through Windows kernel streaming",
"Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>, "
"Haakon Sporsheim <hakon.sporsheim@tandberg.com>");
gst_element_class_add_pad_template (element_class,
gst_pad_template_new ("src", GST_PAD_SRC, GST_PAD_ALWAYS,
ks_video_get_all_caps ()));
}
static void
gst_ks_video_src_class_init (GstKsVideoSrcClass * klass)
{
GObjectClass *gobject_class = G_OBJECT_CLASS (klass);
GstElementClass *gstelement_class = GST_ELEMENT_CLASS (klass);
GstBaseSrcClass *gstbasesrc_class = GST_BASE_SRC_CLASS (klass);
GstPushSrcClass *gstpushsrc_class = GST_PUSH_SRC_CLASS (klass);
g_type_class_add_private (klass, sizeof (GstKsVideoSrcPrivate));
gobject_class->finalize = gst_ks_video_src_finalize;
gobject_class->get_property = gst_ks_video_src_get_property;
gobject_class->set_property = gst_ks_video_src_set_property;
gstelement_class->change_state =
GST_DEBUG_FUNCPTR (gst_ks_video_src_change_state);
gstelement_class->set_clock = GST_DEBUG_FUNCPTR (gst_ks_video_src_set_clock);
gstbasesrc_class->get_caps = GST_DEBUG_FUNCPTR (gst_ks_video_src_get_caps);
gstbasesrc_class->set_caps = GST_DEBUG_FUNCPTR (gst_ks_video_src_set_caps);
gstbasesrc_class->fixate = GST_DEBUG_FUNCPTR (gst_ks_video_src_fixate);
gstbasesrc_class->query = GST_DEBUG_FUNCPTR (gst_ks_video_src_query);
gstbasesrc_class->unlock = GST_DEBUG_FUNCPTR (gst_ks_video_src_unlock);
gstbasesrc_class->unlock_stop =
GST_DEBUG_FUNCPTR (gst_ks_video_src_unlock_stop);
gstpushsrc_class->create = GST_DEBUG_FUNCPTR (gst_ks_video_src_create);
g_object_class_install_property (gobject_class, PROP_DEVICE_PATH,
g_param_spec_string ("device-path", "Device Path",
"The device path", DEFAULT_DEVICE_PATH,
G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
g_object_class_install_property (gobject_class, PROP_DEVICE_NAME,
g_param_spec_string ("device-name", "Device Name",
"The human-readable device name", DEFAULT_DEVICE_NAME,
G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
g_object_class_install_property (gobject_class, PROP_DEVICE_INDEX,
g_param_spec_int ("device-index", "Device Index",
"The zero-based device index", -1, G_MAXINT, DEFAULT_DEVICE_INDEX,
G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
g_object_class_install_property (gobject_class, PROP_DO_STATS,
g_param_spec_boolean ("do-stats", "Enable statistics",
"Enable logging of statistics", DEFAULT_DO_STATS,
G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
g_object_class_install_property (gobject_class, PROP_FPS,
g_param_spec_int ("fps", "Frames per second",
"Last measured framerate, if statistics are enabled",
-1, G_MAXINT, -1, G_PARAM_READABLE | G_PARAM_STATIC_STRINGS));
g_object_class_install_property (gobject_class, PROP_ENABLE_QUIRKS,
g_param_spec_boolean ("enable-quirks", "Enable quirks",
"Enable driver-specific quirks", DEFAULT_ENABLE_QUIRKS,
G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
GST_DEBUG_CATEGORY_INIT (gst_ks_debug, "ksvideosrc",
0, "Kernel streaming video source");
}
static void
gst_ks_video_src_init (GstKsVideoSrc * self, GstKsVideoSrcClass * gclass)
{
GstKsVideoSrcPrivate *priv = GST_KS_VIDEO_SRC_GET_PRIVATE (self);
GstBaseSrc *basesrc = GST_BASE_SRC (self);
gst_base_src_set_live (basesrc, TRUE);
gst_base_src_set_format (basesrc, GST_FORMAT_TIME);
gst_ks_video_src_reset (self);
priv->device_path = DEFAULT_DEVICE_PATH;
priv->device_name = DEFAULT_DEVICE_NAME;
priv->device_index = DEFAULT_DEVICE_INDEX;
priv->do_stats = DEFAULT_DO_STATS;
priv->enable_quirks = DEFAULT_ENABLE_QUIRKS;
}
static void
gst_ks_video_src_finalize (GObject * object)
{
GstKsVideoSrc *self = GST_KS_VIDEO_SRC (object);
GstKsVideoSrcPrivate *priv = GST_KS_VIDEO_SRC_GET_PRIVATE (self);
g_free (priv->device_name);
g_free (priv->device_path);
G_OBJECT_CLASS (parent_class)->finalize (object);
}
static void
gst_ks_video_src_get_property (GObject * object, guint prop_id,
GValue * value, GParamSpec * pspec)
{
GstKsVideoSrc *self = GST_KS_VIDEO_SRC (object);
GstKsVideoSrcPrivate *priv = GST_KS_VIDEO_SRC_GET_PRIVATE (self);
switch (prop_id) {
case PROP_DEVICE_PATH:
g_value_set_string (value, priv->device_path);
break;
case PROP_DEVICE_NAME:
g_value_set_string (value, priv->device_name);
break;
case PROP_DEVICE_INDEX:
g_value_set_int (value, priv->device_index);
break;
case PROP_DO_STATS:
GST_OBJECT_LOCK (object);
g_value_set_boolean (value, priv->do_stats);
GST_OBJECT_UNLOCK (object);
break;
case PROP_FPS:
GST_OBJECT_LOCK (object);
g_value_set_int (value, priv->fps);
GST_OBJECT_UNLOCK (object);
break;
case PROP_ENABLE_QUIRKS:
g_value_set_boolean (value, priv->enable_quirks);
break;
default:
G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
break;
}
}
static void
gst_ks_video_src_set_property (GObject * object, guint prop_id,
const GValue * value, GParamSpec * pspec)
{
GstKsVideoSrc *self = GST_KS_VIDEO_SRC (object);
GstKsVideoSrcPrivate *priv = GST_KS_VIDEO_SRC_GET_PRIVATE (self);
switch (prop_id) {
case PROP_DEVICE_PATH:
g_free (priv->device_path);
priv->device_path = g_value_dup_string (value);
break;
case PROP_DEVICE_NAME:
g_free (priv->device_name);
priv->device_name = g_value_dup_string (value);
break;
case PROP_DEVICE_INDEX:
priv->device_index = g_value_get_int (value);
break;
case PROP_DO_STATS:
GST_OBJECT_LOCK (object);
priv->do_stats = g_value_get_boolean (value);
GST_OBJECT_UNLOCK (object);
break;
case PROP_ENABLE_QUIRKS:
priv->enable_quirks = g_value_get_boolean (value);
break;
default:
G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
break;
}
}
static void
gst_ks_video_src_reset (GstKsVideoSrc * self)
{
GstKsVideoSrcPrivate *priv = GST_KS_VIDEO_SRC_GET_PRIVATE (self);
/* Reset statistics */
priv->last_sampling = GST_CLOCK_TIME_NONE;
priv->count = 0;
priv->fps = -1;
/* Reset timestamping state */
priv->offset = 0;
priv->prev_ts = GST_CLOCK_TIME_NONE;
sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video... Original commit message from CVS: * sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video_device_create_pin, gst_ks_video_device_set_state, gst_ks_video_device_request_frame, gst_ks_video_device_read_frame): Guard against capturing old frames by keeping track of the last timestamp and also zero-fill the buffers before each capture. Only assign a master clock if the pin hasn't already got one. Actually free buffers on the way down to avoid a huge memory leak, as this was previously done when changing state to ACQUIRE downwards and we now skip that state on the way down. Add some debug. * sys/winks/gstksvideosrc.c (DEFAULT_DEVICE_PATH, DEFAULT_DEVICE_NAME, DEFAULT_DEVICE_INDEX, KS_WORKER_LOCK, KS_WORKER_UNLOCK, KS_WORKER_WAIT, KS_WORKER_NOTIFY, KS_WORKER_WAIT_FOR_RESULT, KS_WORKER_NOTIFY_RESULT, KS_WORKER_STATE_STARTING, KS_WORKER_STATE_READY, KS_WORKER_STATE_STOPPING, KS_WORKER_STATE_ERROR, KsWorkerState, device_path, device_name, device_index, running, worker_thread, worker_lock, worker_notify_cond, worker_result_cond, worker_state, worker_pending_caps, worker_setcaps_result, worker_pending_run, worker_run_result, gst_ks_video_src_reset, gst_ks_video_src_apply_driver_quirks, gst_ks_video_src_open_device, gst_ks_video_src_close_device, gst_ks_video_src_worker_func, gst_ks_video_src_start_worker, gst_ks_video_src_stop_worker, gst_ks_video_src_change_state, gst_ks_video_src_set_clock, gst_ks_video_src_set_caps, gst_ks_video_src_timestamp_buffer, gst_ks_video_src_create): Remove ENABLE_CLOCK_DEBUG define, it's GST_LEVEL_DEBUG after all. Get rid of PROP_ENSLAVE_KSCLOCK and always slave the ks clock to the GStreamer clock, it doesn't seem to hurt and matches DirectShow's behavior. As an added bonus we usually get PresentationTime set for each frame, so we can expand on this later for smarter latency reporting (by looking at the diff between the timestamp from the driver and the time according to the GStreamer clock). Use an internal worker thread for opening the device, setting caps, changing its state and closing it. This way we're a lot more compatible with drivers that rely on hacks to do video-effects between the low-level NT API and the application. Ick. Start the ks clock and set the pin to KSSTATE_RUN on the first create() so that we'll hopefully get hold of the GStreamer clock from the very beginning. This way there's no chance that the timestamps will make a sudden jump in the beginning of the stream when we're running with a clock. * sys/winks/kshelpers.c (CHECK_OPTIONS_FLAG, ks_options_flags_to_string): Reorder the flags to match the headerfile order, and make the string a bit more compact. * sys/winks/ksvideohelpers.c (ks_video_probe_filter_for_caps): Avoid leaking KSPROPERTY_PIN_DATARANGES.
2008-09-09 23:58:02 +00:00
priv->running = FALSE;
}
static void
gst_ks_video_src_apply_driver_quirks (GstKsVideoSrc * self)
{
GstKsVideoSrcPrivate *priv = GST_KS_VIDEO_SRC_GET_PRIVATE (self);
HMODULE mod;
/*
* Logitech's driver software injects the following DLL into all processes
sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video... Original commit message from CVS: * sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video_device_create_pin, gst_ks_video_device_set_state, gst_ks_video_device_request_frame, gst_ks_video_device_read_frame): Guard against capturing old frames by keeping track of the last timestamp and also zero-fill the buffers before each capture. Only assign a master clock if the pin hasn't already got one. Actually free buffers on the way down to avoid a huge memory leak, as this was previously done when changing state to ACQUIRE downwards and we now skip that state on the way down. Add some debug. * sys/winks/gstksvideosrc.c (DEFAULT_DEVICE_PATH, DEFAULT_DEVICE_NAME, DEFAULT_DEVICE_INDEX, KS_WORKER_LOCK, KS_WORKER_UNLOCK, KS_WORKER_WAIT, KS_WORKER_NOTIFY, KS_WORKER_WAIT_FOR_RESULT, KS_WORKER_NOTIFY_RESULT, KS_WORKER_STATE_STARTING, KS_WORKER_STATE_READY, KS_WORKER_STATE_STOPPING, KS_WORKER_STATE_ERROR, KsWorkerState, device_path, device_name, device_index, running, worker_thread, worker_lock, worker_notify_cond, worker_result_cond, worker_state, worker_pending_caps, worker_setcaps_result, worker_pending_run, worker_run_result, gst_ks_video_src_reset, gst_ks_video_src_apply_driver_quirks, gst_ks_video_src_open_device, gst_ks_video_src_close_device, gst_ks_video_src_worker_func, gst_ks_video_src_start_worker, gst_ks_video_src_stop_worker, gst_ks_video_src_change_state, gst_ks_video_src_set_clock, gst_ks_video_src_set_caps, gst_ks_video_src_timestamp_buffer, gst_ks_video_src_create): Remove ENABLE_CLOCK_DEBUG define, it's GST_LEVEL_DEBUG after all. Get rid of PROP_ENSLAVE_KSCLOCK and always slave the ks clock to the GStreamer clock, it doesn't seem to hurt and matches DirectShow's behavior. As an added bonus we usually get PresentationTime set for each frame, so we can expand on this later for smarter latency reporting (by looking at the diff between the timestamp from the driver and the time according to the GStreamer clock). Use an internal worker thread for opening the device, setting caps, changing its state and closing it. This way we're a lot more compatible with drivers that rely on hacks to do video-effects between the low-level NT API and the application. Ick. Start the ks clock and set the pin to KSSTATE_RUN on the first create() so that we'll hopefully get hold of the GStreamer clock from the very beginning. This way there's no chance that the timestamps will make a sudden jump in the beginning of the stream when we're running with a clock. * sys/winks/kshelpers.c (CHECK_OPTIONS_FLAG, ks_options_flags_to_string): Reorder the flags to match the headerfile order, and make the string a bit more compact. * sys/winks/ksvideohelpers.c (ks_video_probe_filter_for_caps): Avoid leaking KSPROPERTY_PIN_DATARANGES.
2008-09-09 23:58:02 +00:00
* spawned. This DLL does some nasty tricks, sitting in between the
* application and the low-level ntdll API (NtCreateFile, NtClose,
* NtDeviceIoControlFile, NtDuplicateObject, etc.), making all sorts
sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video... Original commit message from CVS: * sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video_device_create_pin, gst_ks_video_device_set_state, gst_ks_video_device_request_frame, gst_ks_video_device_read_frame): Guard against capturing old frames by keeping track of the last timestamp and also zero-fill the buffers before each capture. Only assign a master clock if the pin hasn't already got one. Actually free buffers on the way down to avoid a huge memory leak, as this was previously done when changing state to ACQUIRE downwards and we now skip that state on the way down. Add some debug. * sys/winks/gstksvideosrc.c (DEFAULT_DEVICE_PATH, DEFAULT_DEVICE_NAME, DEFAULT_DEVICE_INDEX, KS_WORKER_LOCK, KS_WORKER_UNLOCK, KS_WORKER_WAIT, KS_WORKER_NOTIFY, KS_WORKER_WAIT_FOR_RESULT, KS_WORKER_NOTIFY_RESULT, KS_WORKER_STATE_STARTING, KS_WORKER_STATE_READY, KS_WORKER_STATE_STOPPING, KS_WORKER_STATE_ERROR, KsWorkerState, device_path, device_name, device_index, running, worker_thread, worker_lock, worker_notify_cond, worker_result_cond, worker_state, worker_pending_caps, worker_setcaps_result, worker_pending_run, worker_run_result, gst_ks_video_src_reset, gst_ks_video_src_apply_driver_quirks, gst_ks_video_src_open_device, gst_ks_video_src_close_device, gst_ks_video_src_worker_func, gst_ks_video_src_start_worker, gst_ks_video_src_stop_worker, gst_ks_video_src_change_state, gst_ks_video_src_set_clock, gst_ks_video_src_set_caps, gst_ks_video_src_timestamp_buffer, gst_ks_video_src_create): Remove ENABLE_CLOCK_DEBUG define, it's GST_LEVEL_DEBUG after all. Get rid of PROP_ENSLAVE_KSCLOCK and always slave the ks clock to the GStreamer clock, it doesn't seem to hurt and matches DirectShow's behavior. As an added bonus we usually get PresentationTime set for each frame, so we can expand on this later for smarter latency reporting (by looking at the diff between the timestamp from the driver and the time according to the GStreamer clock). Use an internal worker thread for opening the device, setting caps, changing its state and closing it. This way we're a lot more compatible with drivers that rely on hacks to do video-effects between the low-level NT API and the application. Ick. Start the ks clock and set the pin to KSSTATE_RUN on the first create() so that we'll hopefully get hold of the GStreamer clock from the very beginning. This way there's no chance that the timestamps will make a sudden jump in the beginning of the stream when we're running with a clock. * sys/winks/kshelpers.c (CHECK_OPTIONS_FLAG, ks_options_flags_to_string): Reorder the flags to match the headerfile order, and make the string a bit more compact. * sys/winks/ksvideohelpers.c (ks_video_probe_filter_for_caps): Avoid leaking KSPROPERTY_PIN_DATARANGES.
2008-09-09 23:58:02 +00:00
* of assumptions.
*
* The only regression that this quirk causes is that the video effects
* feature doesn't work.
*/
mod = GetModuleHandle ("LVPrcInj.dll");
if (mod != NULL) {
sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video... Original commit message from CVS: * sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video_device_create_pin, gst_ks_video_device_set_state, gst_ks_video_device_request_frame, gst_ks_video_device_read_frame): Guard against capturing old frames by keeping track of the last timestamp and also zero-fill the buffers before each capture. Only assign a master clock if the pin hasn't already got one. Actually free buffers on the way down to avoid a huge memory leak, as this was previously done when changing state to ACQUIRE downwards and we now skip that state on the way down. Add some debug. * sys/winks/gstksvideosrc.c (DEFAULT_DEVICE_PATH, DEFAULT_DEVICE_NAME, DEFAULT_DEVICE_INDEX, KS_WORKER_LOCK, KS_WORKER_UNLOCK, KS_WORKER_WAIT, KS_WORKER_NOTIFY, KS_WORKER_WAIT_FOR_RESULT, KS_WORKER_NOTIFY_RESULT, KS_WORKER_STATE_STARTING, KS_WORKER_STATE_READY, KS_WORKER_STATE_STOPPING, KS_WORKER_STATE_ERROR, KsWorkerState, device_path, device_name, device_index, running, worker_thread, worker_lock, worker_notify_cond, worker_result_cond, worker_state, worker_pending_caps, worker_setcaps_result, worker_pending_run, worker_run_result, gst_ks_video_src_reset, gst_ks_video_src_apply_driver_quirks, gst_ks_video_src_open_device, gst_ks_video_src_close_device, gst_ks_video_src_worker_func, gst_ks_video_src_start_worker, gst_ks_video_src_stop_worker, gst_ks_video_src_change_state, gst_ks_video_src_set_clock, gst_ks_video_src_set_caps, gst_ks_video_src_timestamp_buffer, gst_ks_video_src_create): Remove ENABLE_CLOCK_DEBUG define, it's GST_LEVEL_DEBUG after all. Get rid of PROP_ENSLAVE_KSCLOCK and always slave the ks clock to the GStreamer clock, it doesn't seem to hurt and matches DirectShow's behavior. As an added bonus we usually get PresentationTime set for each frame, so we can expand on this later for smarter latency reporting (by looking at the diff between the timestamp from the driver and the time according to the GStreamer clock). Use an internal worker thread for opening the device, setting caps, changing its state and closing it. This way we're a lot more compatible with drivers that rely on hacks to do video-effects between the low-level NT API and the application. Ick. Start the ks clock and set the pin to KSSTATE_RUN on the first create() so that we'll hopefully get hold of the GStreamer clock from the very beginning. This way there's no chance that the timestamps will make a sudden jump in the beginning of the stream when we're running with a clock. * sys/winks/kshelpers.c (CHECK_OPTIONS_FLAG, ks_options_flags_to_string): Reorder the flags to match the headerfile order, and make the string a bit more compact. * sys/winks/ksvideohelpers.c (ks_video_probe_filter_for_caps): Avoid leaking KSPROPERTY_PIN_DATARANGES.
2008-09-09 23:58:02 +00:00
GST_DEBUG_OBJECT (self, "Logitech DLL detected, neutralizing it");
/*
* We know that no-one's actually keeping this handle around to decrement
* its reference count, so we'll take care of that job. The DLL's DllMain
* implementation takes care of rolling back changes when it gets unloaded,
* so this seems to be the cleanest and most future-proof way that we can
* get rid of it...
*/
FreeLibrary (mod);
/* Paranoia: verify that it's no longer there */
mod = GetModuleHandle ("LVPrcInj.dll");
if (mod != NULL)
sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video... Original commit message from CVS: * sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video_device_create_pin, gst_ks_video_device_set_state, gst_ks_video_device_request_frame, gst_ks_video_device_read_frame): Guard against capturing old frames by keeping track of the last timestamp and also zero-fill the buffers before each capture. Only assign a master clock if the pin hasn't already got one. Actually free buffers on the way down to avoid a huge memory leak, as this was previously done when changing state to ACQUIRE downwards and we now skip that state on the way down. Add some debug. * sys/winks/gstksvideosrc.c (DEFAULT_DEVICE_PATH, DEFAULT_DEVICE_NAME, DEFAULT_DEVICE_INDEX, KS_WORKER_LOCK, KS_WORKER_UNLOCK, KS_WORKER_WAIT, KS_WORKER_NOTIFY, KS_WORKER_WAIT_FOR_RESULT, KS_WORKER_NOTIFY_RESULT, KS_WORKER_STATE_STARTING, KS_WORKER_STATE_READY, KS_WORKER_STATE_STOPPING, KS_WORKER_STATE_ERROR, KsWorkerState, device_path, device_name, device_index, running, worker_thread, worker_lock, worker_notify_cond, worker_result_cond, worker_state, worker_pending_caps, worker_setcaps_result, worker_pending_run, worker_run_result, gst_ks_video_src_reset, gst_ks_video_src_apply_driver_quirks, gst_ks_video_src_open_device, gst_ks_video_src_close_device, gst_ks_video_src_worker_func, gst_ks_video_src_start_worker, gst_ks_video_src_stop_worker, gst_ks_video_src_change_state, gst_ks_video_src_set_clock, gst_ks_video_src_set_caps, gst_ks_video_src_timestamp_buffer, gst_ks_video_src_create): Remove ENABLE_CLOCK_DEBUG define, it's GST_LEVEL_DEBUG after all. Get rid of PROP_ENSLAVE_KSCLOCK and always slave the ks clock to the GStreamer clock, it doesn't seem to hurt and matches DirectShow's behavior. As an added bonus we usually get PresentationTime set for each frame, so we can expand on this later for smarter latency reporting (by looking at the diff between the timestamp from the driver and the time according to the GStreamer clock). Use an internal worker thread for opening the device, setting caps, changing its state and closing it. This way we're a lot more compatible with drivers that rely on hacks to do video-effects between the low-level NT API and the application. Ick. Start the ks clock and set the pin to KSSTATE_RUN on the first create() so that we'll hopefully get hold of the GStreamer clock from the very beginning. This way there's no chance that the timestamps will make a sudden jump in the beginning of the stream when we're running with a clock. * sys/winks/kshelpers.c (CHECK_OPTIONS_FLAG, ks_options_flags_to_string): Reorder the flags to match the headerfile order, and make the string a bit more compact. * sys/winks/ksvideohelpers.c (ks_video_probe_filter_for_caps): Avoid leaking KSPROPERTY_PIN_DATARANGES.
2008-09-09 23:58:02 +00:00
GST_WARNING_OBJECT (self, "failed to neutralize Logitech DLL");
}
}
static gboolean
gst_ks_video_src_open_device (GstKsVideoSrc * self)
{
GstKsVideoSrcPrivate *priv = GST_KS_VIDEO_SRC_GET_PRIVATE (self);
GstKsVideoDevice *device = NULL;
GList *devices, *cur;
g_assert (priv->device == NULL);
devices = ks_enumerate_devices (&KSCATEGORY_VIDEO);
if (devices == NULL)
goto error_no_devices;
for (cur = devices; cur != NULL; cur = cur->next) {
KsDeviceEntry *entry = cur->data;
GST_DEBUG_OBJECT (self, "device %d: name='%s' path='%s'",
entry->index, entry->name, entry->path);
}
for (cur = devices; cur != NULL && device == NULL; cur = cur->next) {
KsDeviceEntry *entry = cur->data;
gboolean match;
if (priv->device_path != NULL) {
match = g_strcasecmp (entry->path, priv->device_path) == 0;
} else if (priv->device_name != NULL) {
match = g_strcasecmp (entry->name, priv->device_name) == 0;
} else if (priv->device_index >= 0) {
match = entry->index == priv->device_index;
} else {
match = TRUE; /* pick the first entry */
}
if (match) {
sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video... Original commit message from CVS: * sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video_device_create_pin, gst_ks_video_device_set_state, gst_ks_video_device_request_frame, gst_ks_video_device_read_frame): Guard against capturing old frames by keeping track of the last timestamp and also zero-fill the buffers before each capture. Only assign a master clock if the pin hasn't already got one. Actually free buffers on the way down to avoid a huge memory leak, as this was previously done when changing state to ACQUIRE downwards and we now skip that state on the way down. Add some debug. * sys/winks/gstksvideosrc.c (DEFAULT_DEVICE_PATH, DEFAULT_DEVICE_NAME, DEFAULT_DEVICE_INDEX, KS_WORKER_LOCK, KS_WORKER_UNLOCK, KS_WORKER_WAIT, KS_WORKER_NOTIFY, KS_WORKER_WAIT_FOR_RESULT, KS_WORKER_NOTIFY_RESULT, KS_WORKER_STATE_STARTING, KS_WORKER_STATE_READY, KS_WORKER_STATE_STOPPING, KS_WORKER_STATE_ERROR, KsWorkerState, device_path, device_name, device_index, running, worker_thread, worker_lock, worker_notify_cond, worker_result_cond, worker_state, worker_pending_caps, worker_setcaps_result, worker_pending_run, worker_run_result, gst_ks_video_src_reset, gst_ks_video_src_apply_driver_quirks, gst_ks_video_src_open_device, gst_ks_video_src_close_device, gst_ks_video_src_worker_func, gst_ks_video_src_start_worker, gst_ks_video_src_stop_worker, gst_ks_video_src_change_state, gst_ks_video_src_set_clock, gst_ks_video_src_set_caps, gst_ks_video_src_timestamp_buffer, gst_ks_video_src_create): Remove ENABLE_CLOCK_DEBUG define, it's GST_LEVEL_DEBUG after all. Get rid of PROP_ENSLAVE_KSCLOCK and always slave the ks clock to the GStreamer clock, it doesn't seem to hurt and matches DirectShow's behavior. As an added bonus we usually get PresentationTime set for each frame, so we can expand on this later for smarter latency reporting (by looking at the diff between the timestamp from the driver and the time according to the GStreamer clock). Use an internal worker thread for opening the device, setting caps, changing its state and closing it. This way we're a lot more compatible with drivers that rely on hacks to do video-effects between the low-level NT API and the application. Ick. Start the ks clock and set the pin to KSSTATE_RUN on the first create() so that we'll hopefully get hold of the GStreamer clock from the very beginning. This way there's no chance that the timestamps will make a sudden jump in the beginning of the stream when we're running with a clock. * sys/winks/kshelpers.c (CHECK_OPTIONS_FLAG, ks_options_flags_to_string): Reorder the flags to match the headerfile order, and make the string a bit more compact. * sys/winks/ksvideohelpers.c (ks_video_probe_filter_for_caps): Avoid leaking KSPROPERTY_PIN_DATARANGES.
2008-09-09 23:58:02 +00:00
priv->ksclock = g_object_new (GST_TYPE_KS_CLOCK, NULL);
if (priv->ksclock != NULL && gst_ks_clock_open (priv->ksclock)) {
GstClock *clock = GST_ELEMENT_CLOCK (self);
if (clock != NULL)
gst_ks_clock_provide_master_clock (priv->ksclock, clock);
} else {
GST_WARNING_OBJECT (self, "failed to create/open KsClock");
sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video... Original commit message from CVS: * sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video_device_create_pin, gst_ks_video_device_set_state, gst_ks_video_device_request_frame, gst_ks_video_device_read_frame): Guard against capturing old frames by keeping track of the last timestamp and also zero-fill the buffers before each capture. Only assign a master clock if the pin hasn't already got one. Actually free buffers on the way down to avoid a huge memory leak, as this was previously done when changing state to ACQUIRE downwards and we now skip that state on the way down. Add some debug. * sys/winks/gstksvideosrc.c (DEFAULT_DEVICE_PATH, DEFAULT_DEVICE_NAME, DEFAULT_DEVICE_INDEX, KS_WORKER_LOCK, KS_WORKER_UNLOCK, KS_WORKER_WAIT, KS_WORKER_NOTIFY, KS_WORKER_WAIT_FOR_RESULT, KS_WORKER_NOTIFY_RESULT, KS_WORKER_STATE_STARTING, KS_WORKER_STATE_READY, KS_WORKER_STATE_STOPPING, KS_WORKER_STATE_ERROR, KsWorkerState, device_path, device_name, device_index, running, worker_thread, worker_lock, worker_notify_cond, worker_result_cond, worker_state, worker_pending_caps, worker_setcaps_result, worker_pending_run, worker_run_result, gst_ks_video_src_reset, gst_ks_video_src_apply_driver_quirks, gst_ks_video_src_open_device, gst_ks_video_src_close_device, gst_ks_video_src_worker_func, gst_ks_video_src_start_worker, gst_ks_video_src_stop_worker, gst_ks_video_src_change_state, gst_ks_video_src_set_clock, gst_ks_video_src_set_caps, gst_ks_video_src_timestamp_buffer, gst_ks_video_src_create): Remove ENABLE_CLOCK_DEBUG define, it's GST_LEVEL_DEBUG after all. Get rid of PROP_ENSLAVE_KSCLOCK and always slave the ks clock to the GStreamer clock, it doesn't seem to hurt and matches DirectShow's behavior. As an added bonus we usually get PresentationTime set for each frame, so we can expand on this later for smarter latency reporting (by looking at the diff between the timestamp from the driver and the time according to the GStreamer clock). Use an internal worker thread for opening the device, setting caps, changing its state and closing it. This way we're a lot more compatible with drivers that rely on hacks to do video-effects between the low-level NT API and the application. Ick. Start the ks clock and set the pin to KSSTATE_RUN on the first create() so that we'll hopefully get hold of the GStreamer clock from the very beginning. This way there's no chance that the timestamps will make a sudden jump in the beginning of the stream when we're running with a clock. * sys/winks/kshelpers.c (CHECK_OPTIONS_FLAG, ks_options_flags_to_string): Reorder the flags to match the headerfile order, and make the string a bit more compact. * sys/winks/ksvideohelpers.c (ks_video_probe_filter_for_caps): Avoid leaking KSPROPERTY_PIN_DATARANGES.
2008-09-09 23:58:02 +00:00
g_object_unref (priv->ksclock);
priv->ksclock = NULL;
}
device = g_object_new (GST_TYPE_KS_VIDEO_DEVICE,
"clock", priv->ksclock, "device-path", entry->path, NULL);
}
ks_device_entry_free (entry);
}
g_list_free (devices);
if (device == NULL)
goto error_no_match;
if (!gst_ks_video_device_open (device))
goto error_open;
priv->device = device;
return TRUE;
/* ERRORS */
error_no_devices:
{
GST_ELEMENT_ERROR (self, RESOURCE, NOT_FOUND,
("No video capture devices found"), (NULL));
return FALSE;
}
error_no_match:
{
if (priv->device_path != NULL) {
GST_ELEMENT_ERROR (self, RESOURCE, SETTINGS,
("Specified video capture device with path '%s' not found",
priv->device_path), (NULL));
} else if (priv->device_name != NULL) {
GST_ELEMENT_ERROR (self, RESOURCE, SETTINGS,
("Specified video capture device with name '%s' not found",
priv->device_name), (NULL));
} else {
GST_ELEMENT_ERROR (self, RESOURCE, SETTINGS,
("Specified video capture device with index %d not found",
priv->device_index), (NULL));
}
return FALSE;
}
error_open:
{
GST_ELEMENT_ERROR (self, RESOURCE, OPEN_READ,
("Failed to open device"), (NULL));
g_object_unref (device);
return FALSE;
}
}
static void
gst_ks_video_src_close_device (GstKsVideoSrc * self)
{
GstKsVideoSrcPrivate *priv = GST_KS_VIDEO_SRC_GET_PRIVATE (self);
g_assert (priv->device != NULL);
gst_ks_video_device_close (priv->device);
g_object_unref (priv->device);
priv->device = NULL;
if (priv->ksclock != NULL) {
gst_ks_clock_close (priv->ksclock);
g_object_unref (priv->ksclock);
priv->ksclock = NULL;
}
gst_ks_video_src_reset (self);
}
sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video... Original commit message from CVS: * sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video_device_create_pin, gst_ks_video_device_set_state, gst_ks_video_device_request_frame, gst_ks_video_device_read_frame): Guard against capturing old frames by keeping track of the last timestamp and also zero-fill the buffers before each capture. Only assign a master clock if the pin hasn't already got one. Actually free buffers on the way down to avoid a huge memory leak, as this was previously done when changing state to ACQUIRE downwards and we now skip that state on the way down. Add some debug. * sys/winks/gstksvideosrc.c (DEFAULT_DEVICE_PATH, DEFAULT_DEVICE_NAME, DEFAULT_DEVICE_INDEX, KS_WORKER_LOCK, KS_WORKER_UNLOCK, KS_WORKER_WAIT, KS_WORKER_NOTIFY, KS_WORKER_WAIT_FOR_RESULT, KS_WORKER_NOTIFY_RESULT, KS_WORKER_STATE_STARTING, KS_WORKER_STATE_READY, KS_WORKER_STATE_STOPPING, KS_WORKER_STATE_ERROR, KsWorkerState, device_path, device_name, device_index, running, worker_thread, worker_lock, worker_notify_cond, worker_result_cond, worker_state, worker_pending_caps, worker_setcaps_result, worker_pending_run, worker_run_result, gst_ks_video_src_reset, gst_ks_video_src_apply_driver_quirks, gst_ks_video_src_open_device, gst_ks_video_src_close_device, gst_ks_video_src_worker_func, gst_ks_video_src_start_worker, gst_ks_video_src_stop_worker, gst_ks_video_src_change_state, gst_ks_video_src_set_clock, gst_ks_video_src_set_caps, gst_ks_video_src_timestamp_buffer, gst_ks_video_src_create): Remove ENABLE_CLOCK_DEBUG define, it's GST_LEVEL_DEBUG after all. Get rid of PROP_ENSLAVE_KSCLOCK and always slave the ks clock to the GStreamer clock, it doesn't seem to hurt and matches DirectShow's behavior. As an added bonus we usually get PresentationTime set for each frame, so we can expand on this later for smarter latency reporting (by looking at the diff between the timestamp from the driver and the time according to the GStreamer clock). Use an internal worker thread for opening the device, setting caps, changing its state and closing it. This way we're a lot more compatible with drivers that rely on hacks to do video-effects between the low-level NT API and the application. Ick. Start the ks clock and set the pin to KSSTATE_RUN on the first create() so that we'll hopefully get hold of the GStreamer clock from the very beginning. This way there's no chance that the timestamps will make a sudden jump in the beginning of the stream when we're running with a clock. * sys/winks/kshelpers.c (CHECK_OPTIONS_FLAG, ks_options_flags_to_string): Reorder the flags to match the headerfile order, and make the string a bit more compact. * sys/winks/ksvideohelpers.c (ks_video_probe_filter_for_caps): Avoid leaking KSPROPERTY_PIN_DATARANGES.
2008-09-09 23:58:02 +00:00
/*
* Worker thread that takes care of starting, configuring and stopping things.
*
* This is needed because Logitech's driver software injects a DLL that
* intercepts API functions like NtCreateFile, NtClose, NtDeviceIoControlFile
* and NtDuplicateObject so that they can provide in-place video effects to
* existing applications. Their assumption is that at least one thread tainted
* by their code stays around for the lifetime of the capture.
*/
static gpointer
gst_ks_video_src_worker_func (gpointer data)
{
GstKsVideoSrc *self = data;
GstKsVideoSrcPrivate *priv = GST_KS_VIDEO_SRC_GET_PRIVATE (self);
if (!gst_ks_video_src_open_device (self))
goto open_failed;
KS_WORKER_LOCK (priv);
priv->worker_state = KS_WORKER_STATE_READY;
KS_WORKER_NOTIFY_RESULT (priv);
while (priv->worker_state != KS_WORKER_STATE_STOPPING) {
KS_WORKER_WAIT (priv);
if (priv->worker_pending_caps != NULL) {
priv->worker_setcaps_result =
gst_ks_video_device_set_caps (priv->device,
priv->worker_pending_caps);
priv->worker_pending_caps = NULL;
KS_WORKER_NOTIFY_RESULT (priv);
} else if (priv->worker_pending_run) {
if (priv->ksclock != NULL)
gst_ks_clock_start (priv->ksclock);
priv->worker_run_result =
gst_ks_video_device_set_state (priv->device, KSSTATE_RUN);
priv->worker_pending_run = FALSE;
KS_WORKER_NOTIFY_RESULT (priv);
}
}
KS_WORKER_UNLOCK (priv);
gst_ks_video_src_close_device (self);
return NULL;
/* ERRORS */
open_failed:
{
KS_WORKER_LOCK (priv);
priv->worker_state = KS_WORKER_STATE_ERROR;
KS_WORKER_NOTIFY_RESULT (priv);
KS_WORKER_UNLOCK (priv);
return NULL;
}
}
static gboolean
gst_ks_video_src_start_worker (GstKsVideoSrc * self)
{
GstKsVideoSrcPrivate *priv = GST_KS_VIDEO_SRC_GET_PRIVATE (self);
gboolean result;
priv->worker_lock = g_mutex_new ();
priv->worker_notify_cond = g_cond_new ();
priv->worker_result_cond = g_cond_new ();
priv->worker_pending_caps = NULL;
priv->worker_pending_run = FALSE;
priv->worker_state = KS_WORKER_STATE_STARTING;
priv->worker_thread =
g_thread_create (gst_ks_video_src_worker_func, self, TRUE, NULL);
KS_WORKER_LOCK (priv);
while (priv->worker_state < KS_WORKER_STATE_READY)
KS_WORKER_WAIT_FOR_RESULT (priv);
result = priv->worker_state == KS_WORKER_STATE_READY;
KS_WORKER_UNLOCK (priv);
return result;
}
static void
gst_ks_video_src_stop_worker (GstKsVideoSrc * self)
{
GstKsVideoSrcPrivate *priv = GST_KS_VIDEO_SRC_GET_PRIVATE (self);
KS_WORKER_LOCK (priv);
priv->worker_state = KS_WORKER_STATE_STOPPING;
KS_WORKER_NOTIFY (priv);
KS_WORKER_UNLOCK (priv);
g_thread_join (priv->worker_thread);
priv->worker_thread = NULL;
g_cond_free (priv->worker_result_cond);
priv->worker_result_cond = NULL;
g_cond_free (priv->worker_notify_cond);
priv->worker_notify_cond = NULL;
g_mutex_free (priv->worker_lock);
priv->worker_lock = NULL;
}
static GstStateChangeReturn
gst_ks_video_src_change_state (GstElement * element, GstStateChange transition)
{
GstKsVideoSrc *self = GST_KS_VIDEO_SRC (element);
GstKsVideoSrcPrivate *priv = GST_KS_VIDEO_SRC_GET_PRIVATE (self);
GstStateChangeReturn ret;
switch (transition) {
case GST_STATE_CHANGE_NULL_TO_READY:
if (priv->enable_quirks)
gst_ks_video_src_apply_driver_quirks (self);
sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video... Original commit message from CVS: * sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video_device_create_pin, gst_ks_video_device_set_state, gst_ks_video_device_request_frame, gst_ks_video_device_read_frame): Guard against capturing old frames by keeping track of the last timestamp and also zero-fill the buffers before each capture. Only assign a master clock if the pin hasn't already got one. Actually free buffers on the way down to avoid a huge memory leak, as this was previously done when changing state to ACQUIRE downwards and we now skip that state on the way down. Add some debug. * sys/winks/gstksvideosrc.c (DEFAULT_DEVICE_PATH, DEFAULT_DEVICE_NAME, DEFAULT_DEVICE_INDEX, KS_WORKER_LOCK, KS_WORKER_UNLOCK, KS_WORKER_WAIT, KS_WORKER_NOTIFY, KS_WORKER_WAIT_FOR_RESULT, KS_WORKER_NOTIFY_RESULT, KS_WORKER_STATE_STARTING, KS_WORKER_STATE_READY, KS_WORKER_STATE_STOPPING, KS_WORKER_STATE_ERROR, KsWorkerState, device_path, device_name, device_index, running, worker_thread, worker_lock, worker_notify_cond, worker_result_cond, worker_state, worker_pending_caps, worker_setcaps_result, worker_pending_run, worker_run_result, gst_ks_video_src_reset, gst_ks_video_src_apply_driver_quirks, gst_ks_video_src_open_device, gst_ks_video_src_close_device, gst_ks_video_src_worker_func, gst_ks_video_src_start_worker, gst_ks_video_src_stop_worker, gst_ks_video_src_change_state, gst_ks_video_src_set_clock, gst_ks_video_src_set_caps, gst_ks_video_src_timestamp_buffer, gst_ks_video_src_create): Remove ENABLE_CLOCK_DEBUG define, it's GST_LEVEL_DEBUG after all. Get rid of PROP_ENSLAVE_KSCLOCK and always slave the ks clock to the GStreamer clock, it doesn't seem to hurt and matches DirectShow's behavior. As an added bonus we usually get PresentationTime set for each frame, so we can expand on this later for smarter latency reporting (by looking at the diff between the timestamp from the driver and the time according to the GStreamer clock). Use an internal worker thread for opening the device, setting caps, changing its state and closing it. This way we're a lot more compatible with drivers that rely on hacks to do video-effects between the low-level NT API and the application. Ick. Start the ks clock and set the pin to KSSTATE_RUN on the first create() so that we'll hopefully get hold of the GStreamer clock from the very beginning. This way there's no chance that the timestamps will make a sudden jump in the beginning of the stream when we're running with a clock. * sys/winks/kshelpers.c (CHECK_OPTIONS_FLAG, ks_options_flags_to_string): Reorder the flags to match the headerfile order, and make the string a bit more compact. * sys/winks/ksvideohelpers.c (ks_video_probe_filter_for_caps): Avoid leaking KSPROPERTY_PIN_DATARANGES.
2008-09-09 23:58:02 +00:00
if (!gst_ks_video_src_start_worker (self))
goto open_failed;
break;
}
ret = GST_ELEMENT_CLASS (parent_class)->change_state (element, transition);
switch (transition) {
case GST_STATE_CHANGE_READY_TO_NULL:
sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video... Original commit message from CVS: * sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video_device_create_pin, gst_ks_video_device_set_state, gst_ks_video_device_request_frame, gst_ks_video_device_read_frame): Guard against capturing old frames by keeping track of the last timestamp and also zero-fill the buffers before each capture. Only assign a master clock if the pin hasn't already got one. Actually free buffers on the way down to avoid a huge memory leak, as this was previously done when changing state to ACQUIRE downwards and we now skip that state on the way down. Add some debug. * sys/winks/gstksvideosrc.c (DEFAULT_DEVICE_PATH, DEFAULT_DEVICE_NAME, DEFAULT_DEVICE_INDEX, KS_WORKER_LOCK, KS_WORKER_UNLOCK, KS_WORKER_WAIT, KS_WORKER_NOTIFY, KS_WORKER_WAIT_FOR_RESULT, KS_WORKER_NOTIFY_RESULT, KS_WORKER_STATE_STARTING, KS_WORKER_STATE_READY, KS_WORKER_STATE_STOPPING, KS_WORKER_STATE_ERROR, KsWorkerState, device_path, device_name, device_index, running, worker_thread, worker_lock, worker_notify_cond, worker_result_cond, worker_state, worker_pending_caps, worker_setcaps_result, worker_pending_run, worker_run_result, gst_ks_video_src_reset, gst_ks_video_src_apply_driver_quirks, gst_ks_video_src_open_device, gst_ks_video_src_close_device, gst_ks_video_src_worker_func, gst_ks_video_src_start_worker, gst_ks_video_src_stop_worker, gst_ks_video_src_change_state, gst_ks_video_src_set_clock, gst_ks_video_src_set_caps, gst_ks_video_src_timestamp_buffer, gst_ks_video_src_create): Remove ENABLE_CLOCK_DEBUG define, it's GST_LEVEL_DEBUG after all. Get rid of PROP_ENSLAVE_KSCLOCK and always slave the ks clock to the GStreamer clock, it doesn't seem to hurt and matches DirectShow's behavior. As an added bonus we usually get PresentationTime set for each frame, so we can expand on this later for smarter latency reporting (by looking at the diff between the timestamp from the driver and the time according to the GStreamer clock). Use an internal worker thread for opening the device, setting caps, changing its state and closing it. This way we're a lot more compatible with drivers that rely on hacks to do video-effects between the low-level NT API and the application. Ick. Start the ks clock and set the pin to KSSTATE_RUN on the first create() so that we'll hopefully get hold of the GStreamer clock from the very beginning. This way there's no chance that the timestamps will make a sudden jump in the beginning of the stream when we're running with a clock. * sys/winks/kshelpers.c (CHECK_OPTIONS_FLAG, ks_options_flags_to_string): Reorder the flags to match the headerfile order, and make the string a bit more compact. * sys/winks/ksvideohelpers.c (ks_video_probe_filter_for_caps): Avoid leaking KSPROPERTY_PIN_DATARANGES.
2008-09-09 23:58:02 +00:00
gst_ks_video_src_stop_worker (self);
break;
}
return ret;
/* ERRORS */
open_failed:
{
sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video... Original commit message from CVS: * sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video_device_create_pin, gst_ks_video_device_set_state, gst_ks_video_device_request_frame, gst_ks_video_device_read_frame): Guard against capturing old frames by keeping track of the last timestamp and also zero-fill the buffers before each capture. Only assign a master clock if the pin hasn't already got one. Actually free buffers on the way down to avoid a huge memory leak, as this was previously done when changing state to ACQUIRE downwards and we now skip that state on the way down. Add some debug. * sys/winks/gstksvideosrc.c (DEFAULT_DEVICE_PATH, DEFAULT_DEVICE_NAME, DEFAULT_DEVICE_INDEX, KS_WORKER_LOCK, KS_WORKER_UNLOCK, KS_WORKER_WAIT, KS_WORKER_NOTIFY, KS_WORKER_WAIT_FOR_RESULT, KS_WORKER_NOTIFY_RESULT, KS_WORKER_STATE_STARTING, KS_WORKER_STATE_READY, KS_WORKER_STATE_STOPPING, KS_WORKER_STATE_ERROR, KsWorkerState, device_path, device_name, device_index, running, worker_thread, worker_lock, worker_notify_cond, worker_result_cond, worker_state, worker_pending_caps, worker_setcaps_result, worker_pending_run, worker_run_result, gst_ks_video_src_reset, gst_ks_video_src_apply_driver_quirks, gst_ks_video_src_open_device, gst_ks_video_src_close_device, gst_ks_video_src_worker_func, gst_ks_video_src_start_worker, gst_ks_video_src_stop_worker, gst_ks_video_src_change_state, gst_ks_video_src_set_clock, gst_ks_video_src_set_caps, gst_ks_video_src_timestamp_buffer, gst_ks_video_src_create): Remove ENABLE_CLOCK_DEBUG define, it's GST_LEVEL_DEBUG after all. Get rid of PROP_ENSLAVE_KSCLOCK and always slave the ks clock to the GStreamer clock, it doesn't seem to hurt and matches DirectShow's behavior. As an added bonus we usually get PresentationTime set for each frame, so we can expand on this later for smarter latency reporting (by looking at the diff between the timestamp from the driver and the time according to the GStreamer clock). Use an internal worker thread for opening the device, setting caps, changing its state and closing it. This way we're a lot more compatible with drivers that rely on hacks to do video-effects between the low-level NT API and the application. Ick. Start the ks clock and set the pin to KSSTATE_RUN on the first create() so that we'll hopefully get hold of the GStreamer clock from the very beginning. This way there's no chance that the timestamps will make a sudden jump in the beginning of the stream when we're running with a clock. * sys/winks/kshelpers.c (CHECK_OPTIONS_FLAG, ks_options_flags_to_string): Reorder the flags to match the headerfile order, and make the string a bit more compact. * sys/winks/ksvideohelpers.c (ks_video_probe_filter_for_caps): Avoid leaking KSPROPERTY_PIN_DATARANGES.
2008-09-09 23:58:02 +00:00
gst_ks_video_src_stop_worker (self);
return GST_STATE_CHANGE_FAILURE;
}
}
static gboolean
gst_ks_video_src_set_clock (GstElement * element, GstClock * clock)
{
GstKsVideoSrc *self = GST_KS_VIDEO_SRC (element);
GstKsVideoSrcPrivate *priv = GST_KS_VIDEO_SRC_GET_PRIVATE (self);
GST_OBJECT_LOCK (element);
sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video... Original commit message from CVS: * sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video_device_create_pin, gst_ks_video_device_set_state, gst_ks_video_device_request_frame, gst_ks_video_device_read_frame): Guard against capturing old frames by keeping track of the last timestamp and also zero-fill the buffers before each capture. Only assign a master clock if the pin hasn't already got one. Actually free buffers on the way down to avoid a huge memory leak, as this was previously done when changing state to ACQUIRE downwards and we now skip that state on the way down. Add some debug. * sys/winks/gstksvideosrc.c (DEFAULT_DEVICE_PATH, DEFAULT_DEVICE_NAME, DEFAULT_DEVICE_INDEX, KS_WORKER_LOCK, KS_WORKER_UNLOCK, KS_WORKER_WAIT, KS_WORKER_NOTIFY, KS_WORKER_WAIT_FOR_RESULT, KS_WORKER_NOTIFY_RESULT, KS_WORKER_STATE_STARTING, KS_WORKER_STATE_READY, KS_WORKER_STATE_STOPPING, KS_WORKER_STATE_ERROR, KsWorkerState, device_path, device_name, device_index, running, worker_thread, worker_lock, worker_notify_cond, worker_result_cond, worker_state, worker_pending_caps, worker_setcaps_result, worker_pending_run, worker_run_result, gst_ks_video_src_reset, gst_ks_video_src_apply_driver_quirks, gst_ks_video_src_open_device, gst_ks_video_src_close_device, gst_ks_video_src_worker_func, gst_ks_video_src_start_worker, gst_ks_video_src_stop_worker, gst_ks_video_src_change_state, gst_ks_video_src_set_clock, gst_ks_video_src_set_caps, gst_ks_video_src_timestamp_buffer, gst_ks_video_src_create): Remove ENABLE_CLOCK_DEBUG define, it's GST_LEVEL_DEBUG after all. Get rid of PROP_ENSLAVE_KSCLOCK and always slave the ks clock to the GStreamer clock, it doesn't seem to hurt and matches DirectShow's behavior. As an added bonus we usually get PresentationTime set for each frame, so we can expand on this later for smarter latency reporting (by looking at the diff between the timestamp from the driver and the time according to the GStreamer clock). Use an internal worker thread for opening the device, setting caps, changing its state and closing it. This way we're a lot more compatible with drivers that rely on hacks to do video-effects between the low-level NT API and the application. Ick. Start the ks clock and set the pin to KSSTATE_RUN on the first create() so that we'll hopefully get hold of the GStreamer clock from the very beginning. This way there's no chance that the timestamps will make a sudden jump in the beginning of the stream when we're running with a clock. * sys/winks/kshelpers.c (CHECK_OPTIONS_FLAG, ks_options_flags_to_string): Reorder the flags to match the headerfile order, and make the string a bit more compact. * sys/winks/ksvideohelpers.c (ks_video_probe_filter_for_caps): Avoid leaking KSPROPERTY_PIN_DATARANGES.
2008-09-09 23:58:02 +00:00
if (clock != NULL && priv->ksclock != NULL)
gst_ks_clock_provide_master_clock (priv->ksclock, clock);
GST_OBJECT_UNLOCK (element);
return TRUE;
}
static GstCaps *
gst_ks_video_src_get_caps (GstBaseSrc * basesrc)
{
GstKsVideoSrc *self = GST_KS_VIDEO_SRC (basesrc);
GstKsVideoSrcPrivate *priv = GST_KS_VIDEO_SRC_GET_PRIVATE (self);
if (priv->device != NULL)
return gst_ks_video_device_get_available_caps (priv->device);
else
return NULL; /* BaseSrc will return template caps */
}
static gboolean
gst_ks_video_src_set_caps (GstBaseSrc * basesrc, GstCaps * caps)
{
GstKsVideoSrc *self = GST_KS_VIDEO_SRC (basesrc);
GstKsVideoSrcPrivate *priv = GST_KS_VIDEO_SRC_GET_PRIVATE (self);
if (priv->device == NULL)
return FALSE;
sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video... Original commit message from CVS: * sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video_device_create_pin, gst_ks_video_device_set_state, gst_ks_video_device_request_frame, gst_ks_video_device_read_frame): Guard against capturing old frames by keeping track of the last timestamp and also zero-fill the buffers before each capture. Only assign a master clock if the pin hasn't already got one. Actually free buffers on the way down to avoid a huge memory leak, as this was previously done when changing state to ACQUIRE downwards and we now skip that state on the way down. Add some debug. * sys/winks/gstksvideosrc.c (DEFAULT_DEVICE_PATH, DEFAULT_DEVICE_NAME, DEFAULT_DEVICE_INDEX, KS_WORKER_LOCK, KS_WORKER_UNLOCK, KS_WORKER_WAIT, KS_WORKER_NOTIFY, KS_WORKER_WAIT_FOR_RESULT, KS_WORKER_NOTIFY_RESULT, KS_WORKER_STATE_STARTING, KS_WORKER_STATE_READY, KS_WORKER_STATE_STOPPING, KS_WORKER_STATE_ERROR, KsWorkerState, device_path, device_name, device_index, running, worker_thread, worker_lock, worker_notify_cond, worker_result_cond, worker_state, worker_pending_caps, worker_setcaps_result, worker_pending_run, worker_run_result, gst_ks_video_src_reset, gst_ks_video_src_apply_driver_quirks, gst_ks_video_src_open_device, gst_ks_video_src_close_device, gst_ks_video_src_worker_func, gst_ks_video_src_start_worker, gst_ks_video_src_stop_worker, gst_ks_video_src_change_state, gst_ks_video_src_set_clock, gst_ks_video_src_set_caps, gst_ks_video_src_timestamp_buffer, gst_ks_video_src_create): Remove ENABLE_CLOCK_DEBUG define, it's GST_LEVEL_DEBUG after all. Get rid of PROP_ENSLAVE_KSCLOCK and always slave the ks clock to the GStreamer clock, it doesn't seem to hurt and matches DirectShow's behavior. As an added bonus we usually get PresentationTime set for each frame, so we can expand on this later for smarter latency reporting (by looking at the diff between the timestamp from the driver and the time according to the GStreamer clock). Use an internal worker thread for opening the device, setting caps, changing its state and closing it. This way we're a lot more compatible with drivers that rely on hacks to do video-effects between the low-level NT API and the application. Ick. Start the ks clock and set the pin to KSSTATE_RUN on the first create() so that we'll hopefully get hold of the GStreamer clock from the very beginning. This way there's no chance that the timestamps will make a sudden jump in the beginning of the stream when we're running with a clock. * sys/winks/kshelpers.c (CHECK_OPTIONS_FLAG, ks_options_flags_to_string): Reorder the flags to match the headerfile order, and make the string a bit more compact. * sys/winks/ksvideohelpers.c (ks_video_probe_filter_for_caps): Avoid leaking KSPROPERTY_PIN_DATARANGES.
2008-09-09 23:58:02 +00:00
KS_WORKER_LOCK (priv);
priv->worker_pending_caps = caps;
KS_WORKER_NOTIFY (priv);
while (priv->worker_pending_caps == caps)
KS_WORKER_WAIT_FOR_RESULT (priv);
KS_WORKER_UNLOCK (priv);
sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video... Original commit message from CVS: * sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video_device_create_pin, gst_ks_video_device_set_state, gst_ks_video_device_request_frame, gst_ks_video_device_read_frame): Guard against capturing old frames by keeping track of the last timestamp and also zero-fill the buffers before each capture. Only assign a master clock if the pin hasn't already got one. Actually free buffers on the way down to avoid a huge memory leak, as this was previously done when changing state to ACQUIRE downwards and we now skip that state on the way down. Add some debug. * sys/winks/gstksvideosrc.c (DEFAULT_DEVICE_PATH, DEFAULT_DEVICE_NAME, DEFAULT_DEVICE_INDEX, KS_WORKER_LOCK, KS_WORKER_UNLOCK, KS_WORKER_WAIT, KS_WORKER_NOTIFY, KS_WORKER_WAIT_FOR_RESULT, KS_WORKER_NOTIFY_RESULT, KS_WORKER_STATE_STARTING, KS_WORKER_STATE_READY, KS_WORKER_STATE_STOPPING, KS_WORKER_STATE_ERROR, KsWorkerState, device_path, device_name, device_index, running, worker_thread, worker_lock, worker_notify_cond, worker_result_cond, worker_state, worker_pending_caps, worker_setcaps_result, worker_pending_run, worker_run_result, gst_ks_video_src_reset, gst_ks_video_src_apply_driver_quirks, gst_ks_video_src_open_device, gst_ks_video_src_close_device, gst_ks_video_src_worker_func, gst_ks_video_src_start_worker, gst_ks_video_src_stop_worker, gst_ks_video_src_change_state, gst_ks_video_src_set_clock, gst_ks_video_src_set_caps, gst_ks_video_src_timestamp_buffer, gst_ks_video_src_create): Remove ENABLE_CLOCK_DEBUG define, it's GST_LEVEL_DEBUG after all. Get rid of PROP_ENSLAVE_KSCLOCK and always slave the ks clock to the GStreamer clock, it doesn't seem to hurt and matches DirectShow's behavior. As an added bonus we usually get PresentationTime set for each frame, so we can expand on this later for smarter latency reporting (by looking at the diff between the timestamp from the driver and the time according to the GStreamer clock). Use an internal worker thread for opening the device, setting caps, changing its state and closing it. This way we're a lot more compatible with drivers that rely on hacks to do video-effects between the low-level NT API and the application. Ick. Start the ks clock and set the pin to KSSTATE_RUN on the first create() so that we'll hopefully get hold of the GStreamer clock from the very beginning. This way there's no chance that the timestamps will make a sudden jump in the beginning of the stream when we're running with a clock. * sys/winks/kshelpers.c (CHECK_OPTIONS_FLAG, ks_options_flags_to_string): Reorder the flags to match the headerfile order, and make the string a bit more compact. * sys/winks/ksvideohelpers.c (ks_video_probe_filter_for_caps): Avoid leaking KSPROPERTY_PIN_DATARANGES.
2008-09-09 23:58:02 +00:00
return priv->worker_setcaps_result;
}
static void
gst_ks_video_src_fixate (GstBaseSrc * basesrc, GstCaps * caps)
{
GstStructure *structure = gst_caps_get_structure (caps, 0);
gst_structure_fixate_field_nearest_int (structure, "width", G_MAXINT);
gst_structure_fixate_field_nearest_int (structure, "height", G_MAXINT);
gst_structure_fixate_field_nearest_fraction (structure, "framerate",
G_MAXINT, 1);
}
static gboolean
gst_ks_video_src_query (GstBaseSrc * basesrc, GstQuery * query)
{
GstKsVideoSrc *self = GST_KS_VIDEO_SRC (basesrc);
GstKsVideoSrcPrivate *priv = GST_KS_VIDEO_SRC_GET_PRIVATE (self);
gboolean result = FALSE;
switch (GST_QUERY_TYPE (query)) {
case GST_QUERY_LATENCY:{
GstClockTime min_latency, max_latency;
if (priv->device == NULL)
goto beach;
result = gst_ks_video_device_get_latency (priv->device, &min_latency,
&max_latency);
if (!result)
goto beach;
GST_DEBUG_OBJECT (self, "reporting latency of min %" GST_TIME_FORMAT
" max %" GST_TIME_FORMAT,
GST_TIME_ARGS (min_latency), GST_TIME_ARGS (max_latency));
gst_query_set_latency (query, TRUE, min_latency, max_latency);
break;
}
default:
result = GST_BASE_SRC_CLASS (parent_class)->query (basesrc, query);
break;
}
beach:
return result;
}
static gboolean
gst_ks_video_src_unlock (GstBaseSrc * basesrc)
{
GstKsVideoSrc *self = GST_KS_VIDEO_SRC (basesrc);
GstKsVideoSrcPrivate *priv = GST_KS_VIDEO_SRC_GET_PRIVATE (self);
GST_DEBUG_OBJECT (self, "%s", G_STRFUNC);
gst_ks_video_device_cancel (priv->device);
return TRUE;
}
static gboolean
gst_ks_video_src_unlock_stop (GstBaseSrc * basesrc)
{
GstKsVideoSrc *self = GST_KS_VIDEO_SRC (basesrc);
GstKsVideoSrcPrivate *priv = GST_KS_VIDEO_SRC_GET_PRIVATE (self);
GST_DEBUG_OBJECT (self, "%s", G_STRFUNC);
gst_ks_video_device_cancel_stop (priv->device);
return TRUE;
}
static gboolean
gst_ks_video_src_timestamp_buffer (GstKsVideoSrc * self, GstBuffer * buf,
GstClockTime presentation_time)
{
GstKsVideoSrcPrivate *priv = GST_KS_VIDEO_SRC_GET_PRIVATE (self);
GstClockTime duration;
GstClock *clock;
GstClockTime timestamp;
duration = gst_ks_video_device_get_duration (priv->device);
GST_OBJECT_LOCK (self);
clock = GST_ELEMENT_CLOCK (self);
if (clock != NULL) {
gst_object_ref (clock);
timestamp = GST_ELEMENT (self)->base_time;
if (GST_CLOCK_TIME_IS_VALID (presentation_time)) {
if (presentation_time > GST_ELEMENT (self)->base_time)
presentation_time -= GST_ELEMENT (self)->base_time;
else
presentation_time = 0;
}
} else {
timestamp = GST_CLOCK_TIME_NONE;
}
GST_OBJECT_UNLOCK (self);
if (clock != NULL) {
/* The time according to the current clock */
timestamp = gst_clock_get_time (clock) - timestamp;
if (timestamp > duration)
timestamp -= duration;
else
timestamp = 0;
if (GST_CLOCK_TIME_IS_VALID (presentation_time)) {
sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video... Original commit message from CVS: * sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video_device_create_pin, gst_ks_video_device_set_state, gst_ks_video_device_request_frame, gst_ks_video_device_read_frame): Guard against capturing old frames by keeping track of the last timestamp and also zero-fill the buffers before each capture. Only assign a master clock if the pin hasn't already got one. Actually free buffers on the way down to avoid a huge memory leak, as this was previously done when changing state to ACQUIRE downwards and we now skip that state on the way down. Add some debug. * sys/winks/gstksvideosrc.c (DEFAULT_DEVICE_PATH, DEFAULT_DEVICE_NAME, DEFAULT_DEVICE_INDEX, KS_WORKER_LOCK, KS_WORKER_UNLOCK, KS_WORKER_WAIT, KS_WORKER_NOTIFY, KS_WORKER_WAIT_FOR_RESULT, KS_WORKER_NOTIFY_RESULT, KS_WORKER_STATE_STARTING, KS_WORKER_STATE_READY, KS_WORKER_STATE_STOPPING, KS_WORKER_STATE_ERROR, KsWorkerState, device_path, device_name, device_index, running, worker_thread, worker_lock, worker_notify_cond, worker_result_cond, worker_state, worker_pending_caps, worker_setcaps_result, worker_pending_run, worker_run_result, gst_ks_video_src_reset, gst_ks_video_src_apply_driver_quirks, gst_ks_video_src_open_device, gst_ks_video_src_close_device, gst_ks_video_src_worker_func, gst_ks_video_src_start_worker, gst_ks_video_src_stop_worker, gst_ks_video_src_change_state, gst_ks_video_src_set_clock, gst_ks_video_src_set_caps, gst_ks_video_src_timestamp_buffer, gst_ks_video_src_create): Remove ENABLE_CLOCK_DEBUG define, it's GST_LEVEL_DEBUG after all. Get rid of PROP_ENSLAVE_KSCLOCK and always slave the ks clock to the GStreamer clock, it doesn't seem to hurt and matches DirectShow's behavior. As an added bonus we usually get PresentationTime set for each frame, so we can expand on this later for smarter latency reporting (by looking at the diff between the timestamp from the driver and the time according to the GStreamer clock). Use an internal worker thread for opening the device, setting caps, changing its state and closing it. This way we're a lot more compatible with drivers that rely on hacks to do video-effects between the low-level NT API and the application. Ick. Start the ks clock and set the pin to KSSTATE_RUN on the first create() so that we'll hopefully get hold of the GStreamer clock from the very beginning. This way there's no chance that the timestamps will make a sudden jump in the beginning of the stream when we're running with a clock. * sys/winks/kshelpers.c (CHECK_OPTIONS_FLAG, ks_options_flags_to_string): Reorder the flags to match the headerfile order, and make the string a bit more compact. * sys/winks/ksvideohelpers.c (ks_video_probe_filter_for_caps): Avoid leaking KSPROPERTY_PIN_DATARANGES.
2008-09-09 23:58:02 +00:00
/*
* We don't use this for anything yet, need to ponder how to deal
* with pins that use an internal clock and timestamp from 0.
*/
GstClockTimeDiff diff = GST_CLOCK_DIFF (presentation_time, timestamp);
GST_DEBUG_OBJECT (self, "diff between gst and driver timestamp: %"
G_GINT64_FORMAT, diff);
}
gst_object_unref (clock);
clock = NULL;
/* Unless it's the first frame, align the current timestamp on a multiple
* of duration since the previous */
if (GST_CLOCK_TIME_IS_VALID (priv->prev_ts)) {
GstClockTime delta;
guint delta_remainder, delta_offset;
/* REVISIT: I've seen this happen with the GstSystemClock on Windows,
* scary... */
if (timestamp < priv->prev_ts) {
GST_WARNING_OBJECT (self, "clock is ticking backwards");
return FALSE;
}
/* Round to a duration boundary */
delta = timestamp - priv->prev_ts;
delta_remainder = delta % duration;
if (delta_remainder < duration / 3)
timestamp -= delta_remainder;
else
timestamp += duration - delta_remainder;
/* How many frames are we off then? */
delta = timestamp - priv->prev_ts;
delta_offset = delta / duration;
if (delta_offset == 1) /* perfect */
GST_BUFFER_FLAG_UNSET (buf, GST_BUFFER_FLAG_DISCONT);
else if (delta_offset > 1) {
guint lost = delta_offset - 1;
GST_INFO_OBJECT (self, "lost %d frame%s, setting discont flag",
lost, (lost > 1) ? "s" : "");
GST_BUFFER_FLAG_SET (buf, GST_BUFFER_FLAG_DISCONT);
} else if (delta_offset == 0) { /* overproduction, skip this frame */
GST_INFO_OBJECT (self, "skipping frame");
return FALSE;
}
priv->offset += delta_offset;
}
priv->prev_ts = timestamp;
}
GST_BUFFER_OFFSET (buf) = priv->offset;
GST_BUFFER_OFFSET_END (buf) = GST_BUFFER_OFFSET (buf) + 1;
GST_BUFFER_TIMESTAMP (buf) = timestamp;
GST_BUFFER_DURATION (buf) = duration;
return TRUE;
}
static void
gst_ks_video_src_update_statistics (GstKsVideoSrc * self)
{
GstKsVideoSrcPrivate *priv = GST_KS_VIDEO_SRC_GET_PRIVATE (self);
GstClock *clock;
GST_OBJECT_LOCK (self);
clock = GST_ELEMENT_CLOCK (self);
if (clock != NULL)
gst_object_ref (clock);
GST_OBJECT_UNLOCK (self);
if (clock != NULL) {
GstClockTime now = gst_clock_get_time (clock);
gst_object_unref (clock);
priv->count++;
if (GST_CLOCK_TIME_IS_VALID (priv->last_sampling)) {
if (now - priv->last_sampling >= GST_SECOND) {
GST_OBJECT_LOCK (self);
priv->fps = priv->count;
GST_OBJECT_UNLOCK (self);
g_object_notify (G_OBJECT (self), "fps");
priv->last_sampling = now;
priv->count = 0;
}
} else {
priv->last_sampling = now;
}
}
}
static GstFlowReturn
gst_ks_video_src_create (GstPushSrc * pushsrc, GstBuffer ** buffer)
{
GstKsVideoSrc *self = GST_KS_VIDEO_SRC (pushsrc);
GstKsVideoSrcPrivate *priv = GST_KS_VIDEO_SRC_GET_PRIVATE (self);
guint buf_size;
GstCaps *caps;
GstBuffer *buf = NULL;
GstFlowReturn result;
GstClockTime presentation_time;
gulong error_code;
gchar *error_str;
g_assert (priv->device != NULL);
if (!gst_ks_video_device_has_caps (priv->device))
goto error_no_caps;
buf_size = gst_ks_video_device_get_frame_size (priv->device);
g_assert (buf_size);
caps = gst_pad_get_negotiated_caps (GST_BASE_SRC_PAD (self));
if (caps == NULL)
goto error_no_caps;
result = gst_pad_alloc_buffer (GST_BASE_SRC_PAD (self), priv->offset,
buf_size, caps, &buf);
gst_caps_unref (caps);
if (G_UNLIKELY (result != GST_FLOW_OK))
goto error_alloc_buffer;
sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video... Original commit message from CVS: * sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video_device_create_pin, gst_ks_video_device_set_state, gst_ks_video_device_request_frame, gst_ks_video_device_read_frame): Guard against capturing old frames by keeping track of the last timestamp and also zero-fill the buffers before each capture. Only assign a master clock if the pin hasn't already got one. Actually free buffers on the way down to avoid a huge memory leak, as this was previously done when changing state to ACQUIRE downwards and we now skip that state on the way down. Add some debug. * sys/winks/gstksvideosrc.c (DEFAULT_DEVICE_PATH, DEFAULT_DEVICE_NAME, DEFAULT_DEVICE_INDEX, KS_WORKER_LOCK, KS_WORKER_UNLOCK, KS_WORKER_WAIT, KS_WORKER_NOTIFY, KS_WORKER_WAIT_FOR_RESULT, KS_WORKER_NOTIFY_RESULT, KS_WORKER_STATE_STARTING, KS_WORKER_STATE_READY, KS_WORKER_STATE_STOPPING, KS_WORKER_STATE_ERROR, KsWorkerState, device_path, device_name, device_index, running, worker_thread, worker_lock, worker_notify_cond, worker_result_cond, worker_state, worker_pending_caps, worker_setcaps_result, worker_pending_run, worker_run_result, gst_ks_video_src_reset, gst_ks_video_src_apply_driver_quirks, gst_ks_video_src_open_device, gst_ks_video_src_close_device, gst_ks_video_src_worker_func, gst_ks_video_src_start_worker, gst_ks_video_src_stop_worker, gst_ks_video_src_change_state, gst_ks_video_src_set_clock, gst_ks_video_src_set_caps, gst_ks_video_src_timestamp_buffer, gst_ks_video_src_create): Remove ENABLE_CLOCK_DEBUG define, it's GST_LEVEL_DEBUG after all. Get rid of PROP_ENSLAVE_KSCLOCK and always slave the ks clock to the GStreamer clock, it doesn't seem to hurt and matches DirectShow's behavior. As an added bonus we usually get PresentationTime set for each frame, so we can expand on this later for smarter latency reporting (by looking at the diff between the timestamp from the driver and the time according to the GStreamer clock). Use an internal worker thread for opening the device, setting caps, changing its state and closing it. This way we're a lot more compatible with drivers that rely on hacks to do video-effects between the low-level NT API and the application. Ick. Start the ks clock and set the pin to KSSTATE_RUN on the first create() so that we'll hopefully get hold of the GStreamer clock from the very beginning. This way there's no chance that the timestamps will make a sudden jump in the beginning of the stream when we're running with a clock. * sys/winks/kshelpers.c (CHECK_OPTIONS_FLAG, ks_options_flags_to_string): Reorder the flags to match the headerfile order, and make the string a bit more compact. * sys/winks/ksvideohelpers.c (ks_video_probe_filter_for_caps): Avoid leaking KSPROPERTY_PIN_DATARANGES.
2008-09-09 23:58:02 +00:00
if (G_UNLIKELY (!priv->running)) {
KS_WORKER_LOCK (priv);
priv->worker_pending_run = TRUE;
KS_WORKER_NOTIFY (priv);
while (priv->worker_pending_run)
KS_WORKER_WAIT_FOR_RESULT (priv);
priv->running = priv->worker_run_result;
KS_WORKER_UNLOCK (priv);
if (!priv->running)
goto error_start_capture;
}
do {
gulong bytes_read;
result = gst_ks_video_device_read_frame (priv->device,
GST_BUFFER_DATA (buf), buf_size, &bytes_read, &presentation_time,
&error_code, &error_str);
if (G_UNLIKELY (result != GST_FLOW_OK))
goto error_read_frame;
GST_BUFFER_SIZE (buf) = bytes_read;
}
while (!gst_ks_video_src_timestamp_buffer (self, buf, presentation_time));
if (G_UNLIKELY (priv->do_stats))
gst_ks_video_src_update_statistics (self);
gst_ks_video_device_postprocess_frame (priv->device,
GST_BUFFER_DATA (buf), GST_BUFFER_SIZE (buf));
*buffer = buf;
return GST_FLOW_OK;
/* ERRORS */
error_no_caps:
{
GST_ELEMENT_ERROR (self, CORE, NEGOTIATION,
("not negotiated"), ("maybe setcaps failed?"));
sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video... Original commit message from CVS: * sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp, gst_ks_video_device_prepare_buffers, gst_ks_video_device_create_pin, gst_ks_video_device_set_state, gst_ks_video_device_request_frame, gst_ks_video_device_read_frame): Guard against capturing old frames by keeping track of the last timestamp and also zero-fill the buffers before each capture. Only assign a master clock if the pin hasn't already got one. Actually free buffers on the way down to avoid a huge memory leak, as this was previously done when changing state to ACQUIRE downwards and we now skip that state on the way down. Add some debug. * sys/winks/gstksvideosrc.c (DEFAULT_DEVICE_PATH, DEFAULT_DEVICE_NAME, DEFAULT_DEVICE_INDEX, KS_WORKER_LOCK, KS_WORKER_UNLOCK, KS_WORKER_WAIT, KS_WORKER_NOTIFY, KS_WORKER_WAIT_FOR_RESULT, KS_WORKER_NOTIFY_RESULT, KS_WORKER_STATE_STARTING, KS_WORKER_STATE_READY, KS_WORKER_STATE_STOPPING, KS_WORKER_STATE_ERROR, KsWorkerState, device_path, device_name, device_index, running, worker_thread, worker_lock, worker_notify_cond, worker_result_cond, worker_state, worker_pending_caps, worker_setcaps_result, worker_pending_run, worker_run_result, gst_ks_video_src_reset, gst_ks_video_src_apply_driver_quirks, gst_ks_video_src_open_device, gst_ks_video_src_close_device, gst_ks_video_src_worker_func, gst_ks_video_src_start_worker, gst_ks_video_src_stop_worker, gst_ks_video_src_change_state, gst_ks_video_src_set_clock, gst_ks_video_src_set_caps, gst_ks_video_src_timestamp_buffer, gst_ks_video_src_create): Remove ENABLE_CLOCK_DEBUG define, it's GST_LEVEL_DEBUG after all. Get rid of PROP_ENSLAVE_KSCLOCK and always slave the ks clock to the GStreamer clock, it doesn't seem to hurt and matches DirectShow's behavior. As an added bonus we usually get PresentationTime set for each frame, so we can expand on this later for smarter latency reporting (by looking at the diff between the timestamp from the driver and the time according to the GStreamer clock). Use an internal worker thread for opening the device, setting caps, changing its state and closing it. This way we're a lot more compatible with drivers that rely on hacks to do video-effects between the low-level NT API and the application. Ick. Start the ks clock and set the pin to KSSTATE_RUN on the first create() so that we'll hopefully get hold of the GStreamer clock from the very beginning. This way there's no chance that the timestamps will make a sudden jump in the beginning of the stream when we're running with a clock. * sys/winks/kshelpers.c (CHECK_OPTIONS_FLAG, ks_options_flags_to_string): Reorder the flags to match the headerfile order, and make the string a bit more compact. * sys/winks/ksvideohelpers.c (ks_video_probe_filter_for_caps): Avoid leaking KSPROPERTY_PIN_DATARANGES.
2008-09-09 23:58:02 +00:00
return GST_FLOW_ERROR;
}
error_start_capture:
{
GST_ELEMENT_ERROR (self, RESOURCE, OPEN_READ,
("could not start capture"),
("failed to change pin state to KSSTATE_RUN"));
return GST_FLOW_ERROR;
}
error_alloc_buffer:
{
GST_ELEMENT_ERROR (self, CORE, PAD, ("alloc_buffer failed"), (NULL));
return result;
}
error_read_frame:
{
if (result != GST_FLOW_WRONG_STATE && result != GST_FLOW_UNEXPECTED) {
GST_ELEMENT_ERROR (self, RESOURCE, READ,
("read failed: %s [0x%08x]", error_str, error_code),
("gst_ks_video_device_read_frame failed"));
}
g_free (error_str);
gst_buffer_unref (buf);
return result;
}
}
static gboolean
plugin_init (GstPlugin * plugin)
{
return gst_element_register (plugin, "ksvideosrc",
GST_RANK_NONE, GST_TYPE_KS_VIDEO_SRC);
}
GST_PLUGIN_DEFINE (GST_VERSION_MAJOR,
GST_VERSION_MINOR,
"winks",
"Windows kernel streaming plugin",
plugin_init, VERSION, "LGPL", "GStreamer", "http://gstreamer.net/")