check/: Added checks.
Original commit message from CVS:
* check/.cvsignore:
* check/Makefile.am:
* check/gst-libs/.cvsignore:
* check/gst-libs/gdp.c: (START_TEST), (gst_object_suite), (main):
* check/gst/.cvsignore:
* check/gst/gstbus.c: (pound_bus_with_messages), (pull_messages),
(START_TEST), (gstbus_suite), (main):
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite), (main):
* check/gst/gstdata.c: (START_TEST), (thread_ref), (thread_unref),
(gst_data_suite), (main):
* check/gst/gstiterator.c: (make_list_of_ints), (START_TEST),
(add_fold_func), (gstiterator_suite), (main):
* check/gst/gstobject.c: (gst_fake_object_get_type), (START_TEST),
(thread_name_object), (thread_name_object_default),
(gst_object_name_compare), (gst_object_suite), (main):
* check/gst/gstpad.c: (START_TEST), (thread_link_unlink),
(gst_pad_suite), (main):
* check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_init):
* check/gstcheck.h:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (START_TEST), (simple_launch_lines_suite), (main):
Added checks.
2005-03-07 18:33:37 +00:00
|
|
|
/* GStreamer
|
|
|
|
* Copyright (C) 2005 Andy Wingo <wingo@pobox.com>
|
|
|
|
*
|
|
|
|
* simple_launch_lines.c: Unit test for simple pipelines
|
|
|
|
*
|
|
|
|
* This library is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU Library General Public
|
|
|
|
* License as published by the Free Software Foundation; either
|
|
|
|
* version 2 of the License, or (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This library is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
|
|
* Library General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU Library General Public
|
|
|
|
* License along with this library; if not, write to the
|
2012-11-03 20:44:48 +00:00
|
|
|
* Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
|
|
|
|
* Boston, MA 02110-1301, USA.
|
check/: Added checks.
Original commit message from CVS:
* check/.cvsignore:
* check/Makefile.am:
* check/gst-libs/.cvsignore:
* check/gst-libs/gdp.c: (START_TEST), (gst_object_suite), (main):
* check/gst/.cvsignore:
* check/gst/gstbus.c: (pound_bus_with_messages), (pull_messages),
(START_TEST), (gstbus_suite), (main):
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite), (main):
* check/gst/gstdata.c: (START_TEST), (thread_ref), (thread_unref),
(gst_data_suite), (main):
* check/gst/gstiterator.c: (make_list_of_ints), (START_TEST),
(add_fold_func), (gstiterator_suite), (main):
* check/gst/gstobject.c: (gst_fake_object_get_type), (START_TEST),
(thread_name_object), (thread_name_object_default),
(gst_object_name_compare), (gst_object_suite), (main):
* check/gst/gstpad.c: (START_TEST), (thread_link_unlink),
(gst_pad_suite), (main):
* check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_init):
* check/gstcheck.h:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (START_TEST), (simple_launch_lines_suite), (main):
Added checks.
2005-03-07 18:33:37 +00:00
|
|
|
*/
|
|
|
|
|
|
|
|
|
2005-08-20 12:14:28 +00:00
|
|
|
#include <gst/check/gstcheck.h>
|
check/: Added checks.
Original commit message from CVS:
* check/.cvsignore:
* check/Makefile.am:
* check/gst-libs/.cvsignore:
* check/gst-libs/gdp.c: (START_TEST), (gst_object_suite), (main):
* check/gst/.cvsignore:
* check/gst/gstbus.c: (pound_bus_with_messages), (pull_messages),
(START_TEST), (gstbus_suite), (main):
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite), (main):
* check/gst/gstdata.c: (START_TEST), (thread_ref), (thread_unref),
(gst_data_suite), (main):
* check/gst/gstiterator.c: (make_list_of_ints), (START_TEST),
(add_fold_func), (gstiterator_suite), (main):
* check/gst/gstobject.c: (gst_fake_object_get_type), (START_TEST),
(thread_name_object), (thread_name_object_default),
(gst_object_name_compare), (gst_object_suite), (main):
* check/gst/gstpad.c: (START_TEST), (thread_link_unlink),
(gst_pad_suite), (main):
* check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_init):
* check/gstcheck.h:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (START_TEST), (simple_launch_lines_suite), (main):
Added checks.
2005-03-07 18:33:37 +00:00
|
|
|
|
|
|
|
|
|
|
|
static GstElement *
|
2010-03-03 10:45:38 +00:00
|
|
|
setup_pipeline (const gchar * pipe_descr)
|
check/: Added checks.
Original commit message from CVS:
* check/.cvsignore:
* check/Makefile.am:
* check/gst-libs/.cvsignore:
* check/gst-libs/gdp.c: (START_TEST), (gst_object_suite), (main):
* check/gst/.cvsignore:
* check/gst/gstbus.c: (pound_bus_with_messages), (pull_messages),
(START_TEST), (gstbus_suite), (main):
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite), (main):
* check/gst/gstdata.c: (START_TEST), (thread_ref), (thread_unref),
(gst_data_suite), (main):
* check/gst/gstiterator.c: (make_list_of_ints), (START_TEST),
(add_fold_func), (gstiterator_suite), (main):
* check/gst/gstobject.c: (gst_fake_object_get_type), (START_TEST),
(thread_name_object), (thread_name_object_default),
(gst_object_name_compare), (gst_object_suite), (main):
* check/gst/gstpad.c: (START_TEST), (thread_link_unlink),
(gst_pad_suite), (main):
* check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_init):
* check/gstcheck.h:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (START_TEST), (simple_launch_lines_suite), (main):
Added checks.
2005-03-07 18:33:37 +00:00
|
|
|
{
|
|
|
|
GstElement *pipeline;
|
|
|
|
|
|
|
|
pipeline = gst_parse_launch (pipe_descr, NULL);
|
2005-11-28 21:51:37 +00:00
|
|
|
fail_unless (GST_IS_PIPELINE (pipeline));
|
check/: Added checks.
Original commit message from CVS:
* check/.cvsignore:
* check/Makefile.am:
* check/gst-libs/.cvsignore:
* check/gst-libs/gdp.c: (START_TEST), (gst_object_suite), (main):
* check/gst/.cvsignore:
* check/gst/gstbus.c: (pound_bus_with_messages), (pull_messages),
(START_TEST), (gstbus_suite), (main):
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite), (main):
* check/gst/gstdata.c: (START_TEST), (thread_ref), (thread_unref),
(gst_data_suite), (main):
* check/gst/gstiterator.c: (make_list_of_ints), (START_TEST),
(add_fold_func), (gstiterator_suite), (main):
* check/gst/gstobject.c: (gst_fake_object_get_type), (START_TEST),
(thread_name_object), (thread_name_object_default),
(gst_object_name_compare), (gst_object_suite), (main):
* check/gst/gstpad.c: (START_TEST), (thread_link_unlink),
(gst_pad_suite), (main):
* check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_init):
* check/gstcheck.h:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (START_TEST), (simple_launch_lines_suite), (main):
Added checks.
2005-03-07 18:33:37 +00:00
|
|
|
return pipeline;
|
|
|
|
}
|
|
|
|
|
2005-09-19 14:41:57 +00:00
|
|
|
/*
|
2005-09-06 22:03:01 +00:00
|
|
|
* run_pipeline:
|
|
|
|
* @pipe: the pipeline to run
|
|
|
|
* @desc: the description for use in messages
|
2005-11-28 21:48:19 +00:00
|
|
|
* @message_types: is a mask of expected message_types
|
|
|
|
* @tmessage: is the expected terminal message
|
2005-09-06 22:03:01 +00:00
|
|
|
*
|
|
|
|
* the poll call will time out after half a second.
|
check/: Added checks.
Original commit message from CVS:
* check/.cvsignore:
* check/Makefile.am:
* check/gst-libs/.cvsignore:
* check/gst-libs/gdp.c: (START_TEST), (gst_object_suite), (main):
* check/gst/.cvsignore:
* check/gst/gstbus.c: (pound_bus_with_messages), (pull_messages),
(START_TEST), (gstbus_suite), (main):
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite), (main):
* check/gst/gstdata.c: (START_TEST), (thread_ref), (thread_unref),
(gst_data_suite), (main):
* check/gst/gstiterator.c: (make_list_of_ints), (START_TEST),
(add_fold_func), (gstiterator_suite), (main):
* check/gst/gstobject.c: (gst_fake_object_get_type), (START_TEST),
(thread_name_object), (thread_name_object_default),
(gst_object_name_compare), (gst_object_suite), (main):
* check/gst/gstpad.c: (START_TEST), (thread_link_unlink),
(gst_pad_suite), (main):
* check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_init):
* check/gstcheck.h:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (START_TEST), (simple_launch_lines_suite), (main):
Added checks.
2005-03-07 18:33:37 +00:00
|
|
|
*/
|
|
|
|
static void
|
2010-03-03 10:45:38 +00:00
|
|
|
run_pipeline (GstElement * pipeline, const gchar * descr,
|
2005-11-28 21:48:19 +00:00
|
|
|
GstMessageType message_types, GstMessageType tmessage)
|
check/: Added checks.
Original commit message from CVS:
* check/.cvsignore:
* check/Makefile.am:
* check/gst-libs/.cvsignore:
* check/gst-libs/gdp.c: (START_TEST), (gst_object_suite), (main):
* check/gst/.cvsignore:
* check/gst/gstbus.c: (pound_bus_with_messages), (pull_messages),
(START_TEST), (gstbus_suite), (main):
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite), (main):
* check/gst/gstdata.c: (START_TEST), (thread_ref), (thread_unref),
(gst_data_suite), (main):
* check/gst/gstiterator.c: (make_list_of_ints), (START_TEST),
(add_fold_func), (gstiterator_suite), (main):
* check/gst/gstobject.c: (gst_fake_object_get_type), (START_TEST),
(thread_name_object), (thread_name_object_default),
(gst_object_name_compare), (gst_object_suite), (main):
* check/gst/gstpad.c: (START_TEST), (thread_link_unlink),
(gst_pad_suite), (main):
* check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_init):
* check/gstcheck.h:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (START_TEST), (simple_launch_lines_suite), (main):
Added checks.
2005-03-07 18:33:37 +00:00
|
|
|
{
|
|
|
|
GstBus *bus;
|
2005-11-28 21:48:19 +00:00
|
|
|
GstMessageType rmessage;
|
2005-10-10 10:59:33 +00:00
|
|
|
GstStateChangeReturn ret;
|
check/: Added checks.
Original commit message from CVS:
* check/.cvsignore:
* check/Makefile.am:
* check/gst-libs/.cvsignore:
* check/gst-libs/gdp.c: (START_TEST), (gst_object_suite), (main):
* check/gst/.cvsignore:
* check/gst/gstbus.c: (pound_bus_with_messages), (pull_messages),
(START_TEST), (gstbus_suite), (main):
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite), (main):
* check/gst/gstdata.c: (START_TEST), (thread_ref), (thread_unref),
(gst_data_suite), (main):
* check/gst/gstiterator.c: (make_list_of_ints), (START_TEST),
(add_fold_func), (gstiterator_suite), (main):
* check/gst/gstobject.c: (gst_fake_object_get_type), (START_TEST),
(thread_name_object), (thread_name_object_default),
(gst_object_name_compare), (gst_object_suite), (main):
* check/gst/gstpad.c: (START_TEST), (thread_link_unlink),
(gst_pad_suite), (main):
* check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_init):
* check/gstcheck.h:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (START_TEST), (simple_launch_lines_suite), (main):
Added checks.
2005-03-07 18:33:37 +00:00
|
|
|
|
2005-11-28 21:48:19 +00:00
|
|
|
fail_if (pipeline == NULL);
|
2005-09-19 14:41:57 +00:00
|
|
|
bus = gst_element_get_bus (pipeline);
|
2005-11-28 21:48:19 +00:00
|
|
|
fail_if (bus == NULL);
|
2005-10-10 10:59:33 +00:00
|
|
|
|
2008-10-10 10:38:12 +00:00
|
|
|
GST_DEBUG ("running pipeline %s", descr);
|
|
|
|
|
2005-10-10 10:59:33 +00:00
|
|
|
ret = gst_element_set_state (pipeline, GST_STATE_PLAYING);
|
Use GstClockTime in _get_state() instead of GTimeVal.
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
* check/gst/gstelement.c: (GST_START_TEST):
* check/gst/gstevent.c: (GST_START_TEST), (test_event):
* check/gst/gstghostpad.c: (GST_START_TEST):
* check/gst/gstpipeline.c: (GST_START_TEST):
* check/pipelines/simple_launch_lines.c: (run_pipeline):
* check/states/sinks.c: (GST_START_TEST):
* gst/elements/gsttypefindelement.c: (stop_typefinding):
* gst/gstbin.c: (gst_bin_provide_clock_func), (gst_bin_add_func),
(gst_bin_remove_func), (gst_bin_get_state_func),
(gst_bin_recalc_state), (gst_bin_change_state_func),
(bin_bus_handler):
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_get_state), (gst_element_abort_state),
(gst_element_commit_state), (gst_element_set_state),
(gst_element_change_state), (gst_element_change_state_func):
* gst/gstelement.h:
* gst/gstpipeline.c: (gst_pipeline_class_init), (do_pipeline_seek),
(gst_pipeline_provide_clock_func):
* gst/gstutils.c: (gst_element_link_pads_filtered):
* tools/gst-launch.c: (main):
* tools/gst-typefind.c: (main):
Use GstClockTime in _get_state() instead of GTimeVal.
Remove old code in gstutils.c
2005-10-12 12:18:48 +00:00
|
|
|
ret = gst_element_get_state (pipeline, NULL, NULL, GST_CLOCK_TIME_NONE);
|
2005-10-10 10:59:33 +00:00
|
|
|
|
|
|
|
if (ret != GST_STATE_CHANGE_SUCCESS) {
|
2008-10-10 10:38:12 +00:00
|
|
|
GST_WARNING ("have failed state change %d", ret);
|
2005-08-26 14:21:43 +00:00
|
|
|
g_critical ("Couldn't set pipeline to PLAYING");
|
|
|
|
goto done;
|
|
|
|
}
|
check/: Added checks.
Original commit message from CVS:
* check/.cvsignore:
* check/Makefile.am:
* check/gst-libs/.cvsignore:
* check/gst-libs/gdp.c: (START_TEST), (gst_object_suite), (main):
* check/gst/.cvsignore:
* check/gst/gstbus.c: (pound_bus_with_messages), (pull_messages),
(START_TEST), (gstbus_suite), (main):
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite), (main):
* check/gst/gstdata.c: (START_TEST), (thread_ref), (thread_unref),
(gst_data_suite), (main):
* check/gst/gstiterator.c: (make_list_of_ints), (START_TEST),
(add_fold_func), (gstiterator_suite), (main):
* check/gst/gstobject.c: (gst_fake_object_get_type), (START_TEST),
(thread_name_object), (thread_name_object_default),
(gst_object_name_compare), (gst_object_suite), (main):
* check/gst/gstpad.c: (START_TEST), (thread_link_unlink),
(gst_pad_suite), (main):
* check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_init):
* check/gstcheck.h:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (START_TEST), (simple_launch_lines_suite), (main):
Added checks.
2005-03-07 18:33:37 +00:00
|
|
|
|
|
|
|
while (1) {
|
GstBusHandler -> GstBusFunc, return value has the same meaning as any other GSource (FALSE == remove source).
Original commit message from CVS:
* check/gst/gstbin.c: (pop_messages), (GST_START_TEST):
* check/gst/gstbus.c: (message_func_eos), (message_func_app),
(send_messages), (GST_START_TEST), (gstbus_suite):
* check/gst/gstpipeline.c: (GST_START_TEST):
* check/pipelines/cleanup.c: (run_pipeline):
* check/pipelines/simple_launch_lines.c: (run_pipeline),
(GST_START_TEST):
* gst/gstbus.c: (gst_bus_have_pending), (gst_bus_source_prepare),
(gst_bus_source_check), (gst_bus_source_dispatch),
(gst_bus_create_watch), (gst_bus_add_watch_full),
(gst_bus_add_watch), (poll_func), (poll_timeout), (gst_bus_poll):
* gst/gstbus.h:
* tools/gst-launch.c: (event_loop):
* tools/gst-md5sum.c: (event_loop):
GstBusHandler -> GstBusFunc, return value has the same meaning as
any other GSource (FALSE == remove source).
_add_watch() and _add_watch_full() now take a MessageType mask to
only handle specific types of messages.
_poll() returns the GstMessage instead of the message type to avoid
race conditions.
_have_pending() takes a MessageType mask now too.
Added testsuite for multiple bus watches.
Fix testsuites and applications for new bus API.
2005-09-19 11:18:03 +00:00
|
|
|
GstMessage *message = gst_bus_poll (bus, GST_MESSAGE_ANY, GST_SECOND / 2);
|
check/: Added checks.
Original commit message from CVS:
* check/.cvsignore:
* check/Makefile.am:
* check/gst-libs/.cvsignore:
* check/gst-libs/gdp.c: (START_TEST), (gst_object_suite), (main):
* check/gst/.cvsignore:
* check/gst/gstbus.c: (pound_bus_with_messages), (pull_messages),
(START_TEST), (gstbus_suite), (main):
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite), (main):
* check/gst/gstdata.c: (START_TEST), (thread_ref), (thread_unref),
(gst_data_suite), (main):
* check/gst/gstiterator.c: (make_list_of_ints), (START_TEST),
(add_fold_func), (gstiterator_suite), (main):
* check/gst/gstobject.c: (gst_fake_object_get_type), (START_TEST),
(thread_name_object), (thread_name_object_default),
(gst_object_name_compare), (gst_object_suite), (main):
* check/gst/gstpad.c: (START_TEST), (thread_link_unlink),
(gst_pad_suite), (main):
* check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_init):
* check/gstcheck.h:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (START_TEST), (simple_launch_lines_suite), (main):
Added checks.
2005-03-07 18:33:37 +00:00
|
|
|
|
GstBusHandler -> GstBusFunc, return value has the same meaning as any other GSource (FALSE == remove source).
Original commit message from CVS:
* check/gst/gstbin.c: (pop_messages), (GST_START_TEST):
* check/gst/gstbus.c: (message_func_eos), (message_func_app),
(send_messages), (GST_START_TEST), (gstbus_suite):
* check/gst/gstpipeline.c: (GST_START_TEST):
* check/pipelines/cleanup.c: (run_pipeline):
* check/pipelines/simple_launch_lines.c: (run_pipeline),
(GST_START_TEST):
* gst/gstbus.c: (gst_bus_have_pending), (gst_bus_source_prepare),
(gst_bus_source_check), (gst_bus_source_dispatch),
(gst_bus_create_watch), (gst_bus_add_watch_full),
(gst_bus_add_watch), (poll_func), (poll_timeout), (gst_bus_poll):
* gst/gstbus.h:
* tools/gst-launch.c: (event_loop):
* tools/gst-md5sum.c: (event_loop):
GstBusHandler -> GstBusFunc, return value has the same meaning as
any other GSource (FALSE == remove source).
_add_watch() and _add_watch_full() now take a MessageType mask to
only handle specific types of messages.
_poll() returns the GstMessage instead of the message type to avoid
race conditions.
_have_pending() takes a MessageType mask now too.
Added testsuite for multiple bus watches.
Fix testsuites and applications for new bus API.
2005-09-19 11:18:03 +00:00
|
|
|
if (message) {
|
2005-11-28 21:48:19 +00:00
|
|
|
rmessage = GST_MESSAGE_TYPE (message);
|
GstBusHandler -> GstBusFunc, return value has the same meaning as any other GSource (FALSE == remove source).
Original commit message from CVS:
* check/gst/gstbin.c: (pop_messages), (GST_START_TEST):
* check/gst/gstbus.c: (message_func_eos), (message_func_app),
(send_messages), (GST_START_TEST), (gstbus_suite):
* check/gst/gstpipeline.c: (GST_START_TEST):
* check/pipelines/cleanup.c: (run_pipeline):
* check/pipelines/simple_launch_lines.c: (run_pipeline),
(GST_START_TEST):
* gst/gstbus.c: (gst_bus_have_pending), (gst_bus_source_prepare),
(gst_bus_source_check), (gst_bus_source_dispatch),
(gst_bus_create_watch), (gst_bus_add_watch_full),
(gst_bus_add_watch), (poll_func), (poll_timeout), (gst_bus_poll):
* gst/gstbus.h:
* tools/gst-launch.c: (event_loop):
* tools/gst-md5sum.c: (event_loop):
GstBusHandler -> GstBusFunc, return value has the same meaning as
any other GSource (FALSE == remove source).
_add_watch() and _add_watch_full() now take a MessageType mask to
only handle specific types of messages.
_poll() returns the GstMessage instead of the message type to avoid
race conditions.
_have_pending() takes a MessageType mask now too.
Added testsuite for multiple bus watches.
Fix testsuites and applications for new bus API.
2005-09-19 11:18:03 +00:00
|
|
|
gst_message_unref (message);
|
|
|
|
} else {
|
2005-11-28 21:48:19 +00:00
|
|
|
rmessage = GST_MESSAGE_UNKNOWN;
|
GstBusHandler -> GstBusFunc, return value has the same meaning as any other GSource (FALSE == remove source).
Original commit message from CVS:
* check/gst/gstbin.c: (pop_messages), (GST_START_TEST):
* check/gst/gstbus.c: (message_func_eos), (message_func_app),
(send_messages), (GST_START_TEST), (gstbus_suite):
* check/gst/gstpipeline.c: (GST_START_TEST):
* check/pipelines/cleanup.c: (run_pipeline):
* check/pipelines/simple_launch_lines.c: (run_pipeline),
(GST_START_TEST):
* gst/gstbus.c: (gst_bus_have_pending), (gst_bus_source_prepare),
(gst_bus_source_check), (gst_bus_source_dispatch),
(gst_bus_create_watch), (gst_bus_add_watch_full),
(gst_bus_add_watch), (poll_func), (poll_timeout), (gst_bus_poll):
* gst/gstbus.h:
* tools/gst-launch.c: (event_loop):
* tools/gst-md5sum.c: (event_loop):
GstBusHandler -> GstBusFunc, return value has the same meaning as
any other GSource (FALSE == remove source).
_add_watch() and _add_watch_full() now take a MessageType mask to
only handle specific types of messages.
_poll() returns the GstMessage instead of the message type to avoid
race conditions.
_have_pending() takes a MessageType mask now too.
Added testsuite for multiple bus watches.
Fix testsuites and applications for new bus API.
2005-09-19 11:18:03 +00:00
|
|
|
}
|
check/: Added checks.
Original commit message from CVS:
* check/.cvsignore:
* check/Makefile.am:
* check/gst-libs/.cvsignore:
* check/gst-libs/gdp.c: (START_TEST), (gst_object_suite), (main):
* check/gst/.cvsignore:
* check/gst/gstbus.c: (pound_bus_with_messages), (pull_messages),
(START_TEST), (gstbus_suite), (main):
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite), (main):
* check/gst/gstdata.c: (START_TEST), (thread_ref), (thread_unref),
(gst_data_suite), (main):
* check/gst/gstiterator.c: (make_list_of_ints), (START_TEST),
(add_fold_func), (gstiterator_suite), (main):
* check/gst/gstobject.c: (gst_fake_object_get_type), (START_TEST),
(thread_name_object), (thread_name_object_default),
(gst_object_name_compare), (gst_object_suite), (main):
* check/gst/gstpad.c: (START_TEST), (thread_link_unlink),
(gst_pad_suite), (main):
* check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_init):
* check/gstcheck.h:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (START_TEST), (simple_launch_lines_suite), (main):
Added checks.
2005-03-07 18:33:37 +00:00
|
|
|
|
2005-11-28 21:48:19 +00:00
|
|
|
if (rmessage == tmessage) {
|
check/: Added checks.
Original commit message from CVS:
* check/.cvsignore:
* check/Makefile.am:
* check/gst-libs/.cvsignore:
* check/gst-libs/gdp.c: (START_TEST), (gst_object_suite), (main):
* check/gst/.cvsignore:
* check/gst/gstbus.c: (pound_bus_with_messages), (pull_messages),
(START_TEST), (gstbus_suite), (main):
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite), (main):
* check/gst/gstdata.c: (START_TEST), (thread_ref), (thread_unref),
(gst_data_suite), (main):
* check/gst/gstiterator.c: (make_list_of_ints), (START_TEST),
(add_fold_func), (gstiterator_suite), (main):
* check/gst/gstobject.c: (gst_fake_object_get_type), (START_TEST),
(thread_name_object), (thread_name_object_default),
(gst_object_name_compare), (gst_object_suite), (main):
* check/gst/gstpad.c: (START_TEST), (thread_link_unlink),
(gst_pad_suite), (main):
* check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_init):
* check/gstcheck.h:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (START_TEST), (simple_launch_lines_suite), (main):
Added checks.
2005-03-07 18:33:37 +00:00
|
|
|
break;
|
2005-11-28 21:48:19 +00:00
|
|
|
} else if (rmessage == GST_MESSAGE_UNKNOWN) {
|
check/: Added checks.
Original commit message from CVS:
* check/.cvsignore:
* check/Makefile.am:
* check/gst-libs/.cvsignore:
* check/gst-libs/gdp.c: (START_TEST), (gst_object_suite), (main):
* check/gst/.cvsignore:
* check/gst/gstbus.c: (pound_bus_with_messages), (pull_messages),
(START_TEST), (gstbus_suite), (main):
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite), (main):
* check/gst/gstdata.c: (START_TEST), (thread_ref), (thread_unref),
(gst_data_suite), (main):
* check/gst/gstiterator.c: (make_list_of_ints), (START_TEST),
(add_fold_func), (gstiterator_suite), (main):
* check/gst/gstobject.c: (gst_fake_object_get_type), (START_TEST),
(thread_name_object), (thread_name_object_default),
(gst_object_name_compare), (gst_object_suite), (main):
* check/gst/gstpad.c: (START_TEST), (thread_link_unlink),
(gst_pad_suite), (main):
* check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_init):
* check/gstcheck.h:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (START_TEST), (simple_launch_lines_suite), (main):
Added checks.
2005-03-07 18:33:37 +00:00
|
|
|
g_critical ("Unexpected timeout in gst_bus_poll, looking for %d: %s",
|
2005-11-28 21:48:19 +00:00
|
|
|
tmessage, descr);
|
check/: Added checks.
Original commit message from CVS:
* check/.cvsignore:
* check/Makefile.am:
* check/gst-libs/.cvsignore:
* check/gst-libs/gdp.c: (START_TEST), (gst_object_suite), (main):
* check/gst/.cvsignore:
* check/gst/gstbus.c: (pound_bus_with_messages), (pull_messages),
(START_TEST), (gstbus_suite), (main):
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite), (main):
* check/gst/gstdata.c: (START_TEST), (thread_ref), (thread_unref),
(gst_data_suite), (main):
* check/gst/gstiterator.c: (make_list_of_ints), (START_TEST),
(add_fold_func), (gstiterator_suite), (main):
* check/gst/gstobject.c: (gst_fake_object_get_type), (START_TEST),
(thread_name_object), (thread_name_object_default),
(gst_object_name_compare), (gst_object_suite), (main):
* check/gst/gstpad.c: (START_TEST), (thread_link_unlink),
(gst_pad_suite), (main):
* check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_init):
* check/gstcheck.h:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (START_TEST), (simple_launch_lines_suite), (main):
Added checks.
2005-03-07 18:33:37 +00:00
|
|
|
break;
|
2005-11-28 21:48:19 +00:00
|
|
|
} else if (rmessage & message_types) {
|
check/: Added checks.
Original commit message from CVS:
* check/.cvsignore:
* check/Makefile.am:
* check/gst-libs/.cvsignore:
* check/gst-libs/gdp.c: (START_TEST), (gst_object_suite), (main):
* check/gst/.cvsignore:
* check/gst/gstbus.c: (pound_bus_with_messages), (pull_messages),
(START_TEST), (gstbus_suite), (main):
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite), (main):
* check/gst/gstdata.c: (START_TEST), (thread_ref), (thread_unref),
(gst_data_suite), (main):
* check/gst/gstiterator.c: (make_list_of_ints), (START_TEST),
(add_fold_func), (gstiterator_suite), (main):
* check/gst/gstobject.c: (gst_fake_object_get_type), (START_TEST),
(thread_name_object), (thread_name_object_default),
(gst_object_name_compare), (gst_object_suite), (main):
* check/gst/gstpad.c: (START_TEST), (thread_link_unlink),
(gst_pad_suite), (main):
* check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_init):
* check/gstcheck.h:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (START_TEST), (simple_launch_lines_suite), (main):
Added checks.
2005-03-07 18:33:37 +00:00
|
|
|
continue;
|
|
|
|
}
|
2007-10-03 14:51:03 +00:00
|
|
|
g_critical
|
|
|
|
("Unexpected message received of type %d, '%s', looking for %d: %s",
|
2007-10-05 11:52:39 +00:00
|
|
|
rmessage, gst_message_type_get_name (rmessage), tmessage, descr);
|
check/: Added checks.
Original commit message from CVS:
* check/.cvsignore:
* check/Makefile.am:
* check/gst-libs/.cvsignore:
* check/gst-libs/gdp.c: (START_TEST), (gst_object_suite), (main):
* check/gst/.cvsignore:
* check/gst/gstbus.c: (pound_bus_with_messages), (pull_messages),
(START_TEST), (gstbus_suite), (main):
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite), (main):
* check/gst/gstdata.c: (START_TEST), (thread_ref), (thread_unref),
(gst_data_suite), (main):
* check/gst/gstiterator.c: (make_list_of_ints), (START_TEST),
(add_fold_func), (gstiterator_suite), (main):
* check/gst/gstobject.c: (gst_fake_object_get_type), (START_TEST),
(thread_name_object), (thread_name_object_default),
(gst_object_name_compare), (gst_object_suite), (main):
* check/gst/gstpad.c: (START_TEST), (thread_link_unlink),
(gst_pad_suite), (main):
* check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_init):
* check/gstcheck.h:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (START_TEST), (simple_launch_lines_suite), (main):
Added checks.
2005-03-07 18:33:37 +00:00
|
|
|
}
|
|
|
|
|
2005-08-26 14:21:43 +00:00
|
|
|
done:
|
2005-09-19 14:41:57 +00:00
|
|
|
gst_element_set_state (pipeline, GST_STATE_NULL);
|
|
|
|
gst_object_unref (pipeline);
|
|
|
|
gst_object_unref (bus);
|
check/: Added checks.
Original commit message from CVS:
* check/.cvsignore:
* check/Makefile.am:
* check/gst-libs/.cvsignore:
* check/gst-libs/gdp.c: (START_TEST), (gst_object_suite), (main):
* check/gst/.cvsignore:
* check/gst/gstbus.c: (pound_bus_with_messages), (pull_messages),
(START_TEST), (gstbus_suite), (main):
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite), (main):
* check/gst/gstdata.c: (START_TEST), (thread_ref), (thread_unref),
(gst_data_suite), (main):
* check/gst/gstiterator.c: (make_list_of_ints), (START_TEST),
(add_fold_func), (gstiterator_suite), (main):
* check/gst/gstobject.c: (gst_fake_object_get_type), (START_TEST),
(thread_name_object), (thread_name_object_default),
(gst_object_name_compare), (gst_object_suite), (main):
* check/gst/gstpad.c: (START_TEST), (thread_link_unlink),
(gst_pad_suite), (main):
* check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_init):
* check/gstcheck.h:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (START_TEST), (simple_launch_lines_suite), (main):
Added checks.
2005-03-07 18:33:37 +00:00
|
|
|
}
|
|
|
|
|
2005-07-09 16:36:18 +00:00
|
|
|
GST_START_TEST (test_2_elements)
|
check/: Added checks.
Original commit message from CVS:
* check/.cvsignore:
* check/Makefile.am:
* check/gst-libs/.cvsignore:
* check/gst-libs/gdp.c: (START_TEST), (gst_object_suite), (main):
* check/gst/.cvsignore:
* check/gst/gstbus.c: (pound_bus_with_messages), (pull_messages),
(START_TEST), (gstbus_suite), (main):
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite), (main):
* check/gst/gstdata.c: (START_TEST), (thread_ref), (thread_unref),
(gst_data_suite), (main):
* check/gst/gstiterator.c: (make_list_of_ints), (START_TEST),
(add_fold_func), (gstiterator_suite), (main):
* check/gst/gstobject.c: (gst_fake_object_get_type), (START_TEST),
(thread_name_object), (thread_name_object_default),
(gst_object_name_compare), (gst_object_suite), (main):
* check/gst/gstpad.c: (START_TEST), (thread_link_unlink),
(gst_pad_suite), (main):
* check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_init):
* check/gstcheck.h:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (START_TEST), (simple_launch_lines_suite), (main):
Added checks.
2005-03-07 18:33:37 +00:00
|
|
|
{
|
2010-03-03 10:45:38 +00:00
|
|
|
const gchar *s;
|
check/: Added checks.
Original commit message from CVS:
* check/.cvsignore:
* check/Makefile.am:
* check/gst-libs/.cvsignore:
* check/gst-libs/gdp.c: (START_TEST), (gst_object_suite), (main):
* check/gst/.cvsignore:
* check/gst/gstbus.c: (pound_bus_with_messages), (pull_messages),
(START_TEST), (gstbus_suite), (main):
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite), (main):
* check/gst/gstdata.c: (START_TEST), (thread_ref), (thread_unref),
(gst_data_suite), (main):
* check/gst/gstiterator.c: (make_list_of_ints), (START_TEST),
(add_fold_func), (gstiterator_suite), (main):
* check/gst/gstobject.c: (gst_fake_object_get_type), (START_TEST),
(thread_name_object), (thread_name_object_default),
(gst_object_name_compare), (gst_object_suite), (main):
* check/gst/gstpad.c: (START_TEST), (thread_link_unlink),
(gst_pad_suite), (main):
* check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_init):
* check/gstcheck.h:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (START_TEST), (simple_launch_lines_suite), (main):
Added checks.
2005-03-07 18:33:37 +00:00
|
|
|
|
2005-08-26 14:21:43 +00:00
|
|
|
s = "fakesrc can-activate-push=false ! fakesink can-activate-pull=true";
|
check/: Added checks.
Original commit message from CVS:
* check/.cvsignore:
* check/Makefile.am:
* check/gst-libs/.cvsignore:
* check/gst-libs/gdp.c: (START_TEST), (gst_object_suite), (main):
* check/gst/.cvsignore:
* check/gst/gstbus.c: (pound_bus_with_messages), (pull_messages),
(START_TEST), (gstbus_suite), (main):
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite), (main):
* check/gst/gstdata.c: (START_TEST), (thread_ref), (thread_unref),
(gst_data_suite), (main):
* check/gst/gstiterator.c: (make_list_of_ints), (START_TEST),
(add_fold_func), (gstiterator_suite), (main):
* check/gst/gstobject.c: (gst_fake_object_get_type), (START_TEST),
(thread_name_object), (thread_name_object_default),
(gst_object_name_compare), (gst_object_suite), (main):
* check/gst/gstpad.c: (START_TEST), (thread_link_unlink),
(gst_pad_suite), (main):
* check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_init):
* check/gstcheck.h:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (START_TEST), (simple_launch_lines_suite), (main):
Added checks.
2005-03-07 18:33:37 +00:00
|
|
|
run_pipeline (setup_pipeline (s), s,
|
docs/gst/gstreamer-sections.txt: Add new element field and method.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
Add new element field and method.
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_recalc_state), (gst_bin_get_state_func),
(gst_bin_element_set_state), (gst_bin_change_state_func),
(gst_bin_continue_func), (bin_bus_handler),
(bin_push_state_continue), (bin_handle_async_start),
(bin_handle_async_done), (gst_bin_handle_message_func):
Make async state changes a bit smarter by using new ASYNC_START and
ASYNC_DONE messages. This reduces the number of times we run the state
recalculation thread.
Don't change state of element with a pending ASYNC_START message.
Deprecate STATE_DIRTY messages.
* gst/gstelement.c: (gst_element_init), (gst_element_send_event),
(gst_element_get_state_func), (gst_element_continue_state),
(gst_element_lost_state), (gst_element_set_state_func),
(gst_element_change_state):
* gst/gstelement.h:
Keep the state that was last set by the app in a new element field.
Don't allow state changes when handling an element event.
Post ASYNC_START and ASYNC_DONE messages.
Change lost_state so that we go to PAUSED and wait for the parent to set
us to PLAYING again (so latency calculation can be performed)
Export gst_element_change_state() method so that subclasses can use it.
API: gst_element_change_state()
API: GST_STATE_TARGET
* gst/gstpipeline.c: (gst_pipeline_class_init),
(reset_stream_time), (gst_pipeline_change_state),
(gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time):
Using the new ASYNC_START message we can reset the base_time when
needed. This can then be used to implement base_time redistribution in
flushing seeks so that we can remove the explicit seek handling.
Perform latency query and configuration when going to PLAYING.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_query), (gst_base_sink_change_state):
Post new ASYNC_START/ASYNC_DONE messages.
* tests/check/generic/sinks.c: (GST_START_TEST):
Fix test because the bin will not set the async element to PLAYING right
away.
* tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST):
Make the message check a little stronger.
Handle ASYNC messages.
* tests/check/pipelines/cleanup.c: (GST_START_TEST):
* tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST):
Expect ASYNC_DONE messages.
2007-03-19 10:47:56 +00:00
|
|
|
GST_MESSAGE_NEW_CLOCK | GST_MESSAGE_STATE_CHANGED |
|
2012-07-09 18:29:29 +00:00
|
|
|
GST_MESSAGE_STREAM_STATUS | GST_MESSAGE_ASYNC_DONE |
|
|
|
|
GST_MESSAGE_STREAM_START, GST_MESSAGE_UNKNOWN);
|
check/: Added checks.
Original commit message from CVS:
* check/.cvsignore:
* check/Makefile.am:
* check/gst-libs/.cvsignore:
* check/gst-libs/gdp.c: (START_TEST), (gst_object_suite), (main):
* check/gst/.cvsignore:
* check/gst/gstbus.c: (pound_bus_with_messages), (pull_messages),
(START_TEST), (gstbus_suite), (main):
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite), (main):
* check/gst/gstdata.c: (START_TEST), (thread_ref), (thread_unref),
(gst_data_suite), (main):
* check/gst/gstiterator.c: (make_list_of_ints), (START_TEST),
(add_fold_func), (gstiterator_suite), (main):
* check/gst/gstobject.c: (gst_fake_object_get_type), (START_TEST),
(thread_name_object), (thread_name_object_default),
(gst_object_name_compare), (gst_object_suite), (main):
* check/gst/gstpad.c: (START_TEST), (thread_link_unlink),
(gst_pad_suite), (main):
* check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_init):
* check/gstcheck.h:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (START_TEST), (simple_launch_lines_suite), (main):
Added checks.
2005-03-07 18:33:37 +00:00
|
|
|
|
2005-08-26 14:21:43 +00:00
|
|
|
s = "fakesrc can-activate-push=true ! fakesink can-activate-pull=false";
|
check/: Added checks.
Original commit message from CVS:
* check/.cvsignore:
* check/Makefile.am:
* check/gst-libs/.cvsignore:
* check/gst-libs/gdp.c: (START_TEST), (gst_object_suite), (main):
* check/gst/.cvsignore:
* check/gst/gstbus.c: (pound_bus_with_messages), (pull_messages),
(START_TEST), (gstbus_suite), (main):
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite), (main):
* check/gst/gstdata.c: (START_TEST), (thread_ref), (thread_unref),
(gst_data_suite), (main):
* check/gst/gstiterator.c: (make_list_of_ints), (START_TEST),
(add_fold_func), (gstiterator_suite), (main):
* check/gst/gstobject.c: (gst_fake_object_get_type), (START_TEST),
(thread_name_object), (thread_name_object_default),
(gst_object_name_compare), (gst_object_suite), (main):
* check/gst/gstpad.c: (START_TEST), (thread_link_unlink),
(gst_pad_suite), (main):
* check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_init):
* check/gstcheck.h:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (START_TEST), (simple_launch_lines_suite), (main):
Added checks.
2005-03-07 18:33:37 +00:00
|
|
|
run_pipeline (setup_pipeline (s), s,
|
docs/gst/gstreamer-sections.txt: Add new element field and method.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
Add new element field and method.
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_recalc_state), (gst_bin_get_state_func),
(gst_bin_element_set_state), (gst_bin_change_state_func),
(gst_bin_continue_func), (bin_bus_handler),
(bin_push_state_continue), (bin_handle_async_start),
(bin_handle_async_done), (gst_bin_handle_message_func):
Make async state changes a bit smarter by using new ASYNC_START and
ASYNC_DONE messages. This reduces the number of times we run the state
recalculation thread.
Don't change state of element with a pending ASYNC_START message.
Deprecate STATE_DIRTY messages.
* gst/gstelement.c: (gst_element_init), (gst_element_send_event),
(gst_element_get_state_func), (gst_element_continue_state),
(gst_element_lost_state), (gst_element_set_state_func),
(gst_element_change_state):
* gst/gstelement.h:
Keep the state that was last set by the app in a new element field.
Don't allow state changes when handling an element event.
Post ASYNC_START and ASYNC_DONE messages.
Change lost_state so that we go to PAUSED and wait for the parent to set
us to PLAYING again (so latency calculation can be performed)
Export gst_element_change_state() method so that subclasses can use it.
API: gst_element_change_state()
API: GST_STATE_TARGET
* gst/gstpipeline.c: (gst_pipeline_class_init),
(reset_stream_time), (gst_pipeline_change_state),
(gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time):
Using the new ASYNC_START message we can reset the base_time when
needed. This can then be used to implement base_time redistribution in
flushing seeks so that we can remove the explicit seek handling.
Perform latency query and configuration when going to PLAYING.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_query), (gst_base_sink_change_state):
Post new ASYNC_START/ASYNC_DONE messages.
* tests/check/generic/sinks.c: (GST_START_TEST):
Fix test because the bin will not set the async element to PLAYING right
away.
* tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST):
Make the message check a little stronger.
Handle ASYNC messages.
* tests/check/pipelines/cleanup.c: (GST_START_TEST):
* tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST):
Expect ASYNC_DONE messages.
2007-03-19 10:47:56 +00:00
|
|
|
GST_MESSAGE_NEW_CLOCK | GST_MESSAGE_STATE_CHANGED |
|
2012-07-09 18:29:29 +00:00
|
|
|
GST_MESSAGE_STREAM_STATUS | GST_MESSAGE_ASYNC_DONE |
|
|
|
|
GST_MESSAGE_STREAM_START, GST_MESSAGE_UNKNOWN);
|
check/: Added checks.
Original commit message from CVS:
* check/.cvsignore:
* check/Makefile.am:
* check/gst-libs/.cvsignore:
* check/gst-libs/gdp.c: (START_TEST), (gst_object_suite), (main):
* check/gst/.cvsignore:
* check/gst/gstbus.c: (pound_bus_with_messages), (pull_messages),
(START_TEST), (gstbus_suite), (main):
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite), (main):
* check/gst/gstdata.c: (START_TEST), (thread_ref), (thread_unref),
(gst_data_suite), (main):
* check/gst/gstiterator.c: (make_list_of_ints), (START_TEST),
(add_fold_func), (gstiterator_suite), (main):
* check/gst/gstobject.c: (gst_fake_object_get_type), (START_TEST),
(thread_name_object), (thread_name_object_default),
(gst_object_name_compare), (gst_object_suite), (main):
* check/gst/gstpad.c: (START_TEST), (thread_link_unlink),
(gst_pad_suite), (main):
* check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_init):
* check/gstcheck.h:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (START_TEST), (simple_launch_lines_suite), (main):
Added checks.
2005-03-07 18:33:37 +00:00
|
|
|
|
2005-08-26 14:21:43 +00:00
|
|
|
s = "fakesrc can-activate-push=false num-buffers=10 ! fakesink can-activate-pull=true";
|
check/: Added checks.
Original commit message from CVS:
* check/.cvsignore:
* check/Makefile.am:
* check/gst-libs/.cvsignore:
* check/gst-libs/gdp.c: (START_TEST), (gst_object_suite), (main):
* check/gst/.cvsignore:
* check/gst/gstbus.c: (pound_bus_with_messages), (pull_messages),
(START_TEST), (gstbus_suite), (main):
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite), (main):
* check/gst/gstdata.c: (START_TEST), (thread_ref), (thread_unref),
(gst_data_suite), (main):
* check/gst/gstiterator.c: (make_list_of_ints), (START_TEST),
(add_fold_func), (gstiterator_suite), (main):
* check/gst/gstobject.c: (gst_fake_object_get_type), (START_TEST),
(thread_name_object), (thread_name_object_default),
(gst_object_name_compare), (gst_object_suite), (main):
* check/gst/gstpad.c: (START_TEST), (thread_link_unlink),
(gst_pad_suite), (main):
* check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_init):
* check/gstcheck.h:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (START_TEST), (simple_launch_lines_suite), (main):
Added checks.
2005-03-07 18:33:37 +00:00
|
|
|
run_pipeline (setup_pipeline (s), s,
|
docs/gst/gstreamer-sections.txt: Add new element field and method.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
Add new element field and method.
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_recalc_state), (gst_bin_get_state_func),
(gst_bin_element_set_state), (gst_bin_change_state_func),
(gst_bin_continue_func), (bin_bus_handler),
(bin_push_state_continue), (bin_handle_async_start),
(bin_handle_async_done), (gst_bin_handle_message_func):
Make async state changes a bit smarter by using new ASYNC_START and
ASYNC_DONE messages. This reduces the number of times we run the state
recalculation thread.
Don't change state of element with a pending ASYNC_START message.
Deprecate STATE_DIRTY messages.
* gst/gstelement.c: (gst_element_init), (gst_element_send_event),
(gst_element_get_state_func), (gst_element_continue_state),
(gst_element_lost_state), (gst_element_set_state_func),
(gst_element_change_state):
* gst/gstelement.h:
Keep the state that was last set by the app in a new element field.
Don't allow state changes when handling an element event.
Post ASYNC_START and ASYNC_DONE messages.
Change lost_state so that we go to PAUSED and wait for the parent to set
us to PLAYING again (so latency calculation can be performed)
Export gst_element_change_state() method so that subclasses can use it.
API: gst_element_change_state()
API: GST_STATE_TARGET
* gst/gstpipeline.c: (gst_pipeline_class_init),
(reset_stream_time), (gst_pipeline_change_state),
(gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time):
Using the new ASYNC_START message we can reset the base_time when
needed. This can then be used to implement base_time redistribution in
flushing seeks so that we can remove the explicit seek handling.
Perform latency query and configuration when going to PLAYING.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_query), (gst_base_sink_change_state):
Post new ASYNC_START/ASYNC_DONE messages.
* tests/check/generic/sinks.c: (GST_START_TEST):
Fix test because the bin will not set the async element to PLAYING right
away.
* tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST):
Make the message check a little stronger.
Handle ASYNC messages.
* tests/check/pipelines/cleanup.c: (GST_START_TEST):
* tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST):
Expect ASYNC_DONE messages.
2007-03-19 10:47:56 +00:00
|
|
|
GST_MESSAGE_NEW_CLOCK | GST_MESSAGE_STATE_CHANGED |
|
2012-07-09 18:29:29 +00:00
|
|
|
GST_MESSAGE_STREAM_STATUS | GST_MESSAGE_ASYNC_DONE |
|
|
|
|
GST_MESSAGE_STREAM_START, GST_MESSAGE_EOS);
|
check/: Added checks.
Original commit message from CVS:
* check/.cvsignore:
* check/Makefile.am:
* check/gst-libs/.cvsignore:
* check/gst-libs/gdp.c: (START_TEST), (gst_object_suite), (main):
* check/gst/.cvsignore:
* check/gst/gstbus.c: (pound_bus_with_messages), (pull_messages),
(START_TEST), (gstbus_suite), (main):
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite), (main):
* check/gst/gstdata.c: (START_TEST), (thread_ref), (thread_unref),
(gst_data_suite), (main):
* check/gst/gstiterator.c: (make_list_of_ints), (START_TEST),
(add_fold_func), (gstiterator_suite), (main):
* check/gst/gstobject.c: (gst_fake_object_get_type), (START_TEST),
(thread_name_object), (thread_name_object_default),
(gst_object_name_compare), (gst_object_suite), (main):
* check/gst/gstpad.c: (START_TEST), (thread_link_unlink),
(gst_pad_suite), (main):
* check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_init):
* check/gstcheck.h:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (START_TEST), (simple_launch_lines_suite), (main):
Added checks.
2005-03-07 18:33:37 +00:00
|
|
|
|
2005-08-26 14:21:43 +00:00
|
|
|
s = "fakesrc can-activate-push=true num-buffers=10 ! fakesink can-activate-pull=false";
|
check/: Added checks.
Original commit message from CVS:
* check/.cvsignore:
* check/Makefile.am:
* check/gst-libs/.cvsignore:
* check/gst-libs/gdp.c: (START_TEST), (gst_object_suite), (main):
* check/gst/.cvsignore:
* check/gst/gstbus.c: (pound_bus_with_messages), (pull_messages),
(START_TEST), (gstbus_suite), (main):
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite), (main):
* check/gst/gstdata.c: (START_TEST), (thread_ref), (thread_unref),
(gst_data_suite), (main):
* check/gst/gstiterator.c: (make_list_of_ints), (START_TEST),
(add_fold_func), (gstiterator_suite), (main):
* check/gst/gstobject.c: (gst_fake_object_get_type), (START_TEST),
(thread_name_object), (thread_name_object_default),
(gst_object_name_compare), (gst_object_suite), (main):
* check/gst/gstpad.c: (START_TEST), (thread_link_unlink),
(gst_pad_suite), (main):
* check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_init):
* check/gstcheck.h:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (START_TEST), (simple_launch_lines_suite), (main):
Added checks.
2005-03-07 18:33:37 +00:00
|
|
|
run_pipeline (setup_pipeline (s), s,
|
docs/gst/gstreamer-sections.txt: Add new element field and method.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
Add new element field and method.
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_recalc_state), (gst_bin_get_state_func),
(gst_bin_element_set_state), (gst_bin_change_state_func),
(gst_bin_continue_func), (bin_bus_handler),
(bin_push_state_continue), (bin_handle_async_start),
(bin_handle_async_done), (gst_bin_handle_message_func):
Make async state changes a bit smarter by using new ASYNC_START and
ASYNC_DONE messages. This reduces the number of times we run the state
recalculation thread.
Don't change state of element with a pending ASYNC_START message.
Deprecate STATE_DIRTY messages.
* gst/gstelement.c: (gst_element_init), (gst_element_send_event),
(gst_element_get_state_func), (gst_element_continue_state),
(gst_element_lost_state), (gst_element_set_state_func),
(gst_element_change_state):
* gst/gstelement.h:
Keep the state that was last set by the app in a new element field.
Don't allow state changes when handling an element event.
Post ASYNC_START and ASYNC_DONE messages.
Change lost_state so that we go to PAUSED and wait for the parent to set
us to PLAYING again (so latency calculation can be performed)
Export gst_element_change_state() method so that subclasses can use it.
API: gst_element_change_state()
API: GST_STATE_TARGET
* gst/gstpipeline.c: (gst_pipeline_class_init),
(reset_stream_time), (gst_pipeline_change_state),
(gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time):
Using the new ASYNC_START message we can reset the base_time when
needed. This can then be used to implement base_time redistribution in
flushing seeks so that we can remove the explicit seek handling.
Perform latency query and configuration when going to PLAYING.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_query), (gst_base_sink_change_state):
Post new ASYNC_START/ASYNC_DONE messages.
* tests/check/generic/sinks.c: (GST_START_TEST):
Fix test because the bin will not set the async element to PLAYING right
away.
* tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST):
Make the message check a little stronger.
Handle ASYNC messages.
* tests/check/pipelines/cleanup.c: (GST_START_TEST):
* tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST):
Expect ASYNC_DONE messages.
2007-03-19 10:47:56 +00:00
|
|
|
GST_MESSAGE_NEW_CLOCK | GST_MESSAGE_STATE_CHANGED |
|
2012-07-09 18:29:29 +00:00
|
|
|
GST_MESSAGE_STREAM_STATUS | GST_MESSAGE_ASYNC_DONE |
|
|
|
|
GST_MESSAGE_STREAM_START, GST_MESSAGE_EOS);
|
check/: Added checks.
Original commit message from CVS:
* check/.cvsignore:
* check/Makefile.am:
* check/gst-libs/.cvsignore:
* check/gst-libs/gdp.c: (START_TEST), (gst_object_suite), (main):
* check/gst/.cvsignore:
* check/gst/gstbus.c: (pound_bus_with_messages), (pull_messages),
(START_TEST), (gstbus_suite), (main):
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite), (main):
* check/gst/gstdata.c: (START_TEST), (thread_ref), (thread_unref),
(gst_data_suite), (main):
* check/gst/gstiterator.c: (make_list_of_ints), (START_TEST),
(add_fold_func), (gstiterator_suite), (main):
* check/gst/gstobject.c: (gst_fake_object_get_type), (START_TEST),
(thread_name_object), (thread_name_object_default),
(gst_object_name_compare), (gst_object_suite), (main):
* check/gst/gstpad.c: (START_TEST), (thread_link_unlink),
(gst_pad_suite), (main):
* check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_init):
* check/gstcheck.h:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (START_TEST), (simple_launch_lines_suite), (main):
Added checks.
2005-03-07 18:33:37 +00:00
|
|
|
|
2005-08-26 14:21:43 +00:00
|
|
|
s = "fakesrc can-activate-push=false ! fakesink can-activate-pull=false";
|
|
|
|
ASSERT_CRITICAL (run_pipeline (setup_pipeline (s), s,
|
docs/gst/gstreamer-sections.txt: Add new element field and method.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
Add new element field and method.
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_recalc_state), (gst_bin_get_state_func),
(gst_bin_element_set_state), (gst_bin_change_state_func),
(gst_bin_continue_func), (bin_bus_handler),
(bin_push_state_continue), (bin_handle_async_start),
(bin_handle_async_done), (gst_bin_handle_message_func):
Make async state changes a bit smarter by using new ASYNC_START and
ASYNC_DONE messages. This reduces the number of times we run the state
recalculation thread.
Don't change state of element with a pending ASYNC_START message.
Deprecate STATE_DIRTY messages.
* gst/gstelement.c: (gst_element_init), (gst_element_send_event),
(gst_element_get_state_func), (gst_element_continue_state),
(gst_element_lost_state), (gst_element_set_state_func),
(gst_element_change_state):
* gst/gstelement.h:
Keep the state that was last set by the app in a new element field.
Don't allow state changes when handling an element event.
Post ASYNC_START and ASYNC_DONE messages.
Change lost_state so that we go to PAUSED and wait for the parent to set
us to PLAYING again (so latency calculation can be performed)
Export gst_element_change_state() method so that subclasses can use it.
API: gst_element_change_state()
API: GST_STATE_TARGET
* gst/gstpipeline.c: (gst_pipeline_class_init),
(reset_stream_time), (gst_pipeline_change_state),
(gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time):
Using the new ASYNC_START message we can reset the base_time when
needed. This can then be used to implement base_time redistribution in
flushing seeks so that we can remove the explicit seek handling.
Perform latency query and configuration when going to PLAYING.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_query), (gst_base_sink_change_state):
Post new ASYNC_START/ASYNC_DONE messages.
* tests/check/generic/sinks.c: (GST_START_TEST):
Fix test because the bin will not set the async element to PLAYING right
away.
* tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST):
Make the message check a little stronger.
Handle ASYNC messages.
* tests/check/pipelines/cleanup.c: (GST_START_TEST):
* tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST):
Expect ASYNC_DONE messages.
2007-03-19 10:47:56 +00:00
|
|
|
GST_MESSAGE_NEW_CLOCK | GST_MESSAGE_STATE_CHANGED |
|
2012-07-09 18:29:29 +00:00
|
|
|
GST_MESSAGE_STREAM_STATUS | GST_MESSAGE_ASYNC_DONE |
|
|
|
|
GST_MESSAGE_STREAM_START, GST_MESSAGE_UNKNOWN));
|
check/: Added checks.
Original commit message from CVS:
* check/.cvsignore:
* check/Makefile.am:
* check/gst-libs/.cvsignore:
* check/gst-libs/gdp.c: (START_TEST), (gst_object_suite), (main):
* check/gst/.cvsignore:
* check/gst/gstbus.c: (pound_bus_with_messages), (pull_messages),
(START_TEST), (gstbus_suite), (main):
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite), (main):
* check/gst/gstdata.c: (START_TEST), (thread_ref), (thread_unref),
(gst_data_suite), (main):
* check/gst/gstiterator.c: (make_list_of_ints), (START_TEST),
(add_fold_func), (gstiterator_suite), (main):
* check/gst/gstobject.c: (gst_fake_object_get_type), (START_TEST),
(thread_name_object), (thread_name_object_default),
(gst_object_name_compare), (gst_object_suite), (main):
* check/gst/gstpad.c: (START_TEST), (thread_link_unlink),
(gst_pad_suite), (main):
* check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_init):
* check/gstcheck.h:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (START_TEST), (simple_launch_lines_suite), (main):
Added checks.
2005-03-07 18:33:37 +00:00
|
|
|
}
|
2005-09-19 14:41:57 +00:00
|
|
|
|
|
|
|
GST_END_TEST;
|
|
|
|
|
2007-06-19 21:28:54 +00:00
|
|
|
static void
|
|
|
|
check_state_change_return (GstElement * pipeline, GstState state,
|
|
|
|
GstStateChangeReturn immediate, GstStateChangeReturn final)
|
|
|
|
{
|
|
|
|
GstStateChangeReturn ret;
|
|
|
|
|
|
|
|
ret = gst_element_set_state (pipeline, state);
|
|
|
|
if (ret != immediate)
|
|
|
|
g_critical ("Unexpected set_state return ->%s: %d != %d",
|
|
|
|
gst_element_state_get_name (state), ret, immediate);
|
|
|
|
ret = gst_element_get_state (pipeline, NULL, NULL, GST_CLOCK_TIME_NONE);
|
|
|
|
if (ret != final)
|
|
|
|
g_critical ("Unexpected get_state return ->%s: %d != %d",
|
|
|
|
gst_element_state_get_name (state), ret, final);
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
GST_START_TEST (test_state_change_returns)
|
|
|
|
{
|
2010-03-03 10:45:38 +00:00
|
|
|
const gchar *s;
|
2007-06-19 21:28:54 +00:00
|
|
|
GstElement *pipeline;
|
|
|
|
|
|
|
|
s = "fakesrc can-activate-pull=false ! fakesink";
|
|
|
|
pipeline = gst_parse_launch (s, NULL);
|
|
|
|
fail_unless (GST_IS_PIPELINE (pipeline));
|
|
|
|
check_state_change_return (pipeline, GST_STATE_READY,
|
|
|
|
GST_STATE_CHANGE_SUCCESS, GST_STATE_CHANGE_SUCCESS);
|
|
|
|
check_state_change_return (pipeline, GST_STATE_PAUSED, GST_STATE_CHANGE_ASYNC,
|
|
|
|
GST_STATE_CHANGE_SUCCESS);
|
|
|
|
check_state_change_return (pipeline, GST_STATE_PLAYING,
|
|
|
|
GST_STATE_CHANGE_SUCCESS, GST_STATE_CHANGE_SUCCESS);
|
2007-06-19 21:58:30 +00:00
|
|
|
/* can't check PAUSED, it's not deterministic */
|
|
|
|
check_state_change_return (pipeline, GST_STATE_READY,
|
|
|
|
GST_STATE_CHANGE_SUCCESS, GST_STATE_CHANGE_SUCCESS);
|
2007-06-19 21:28:54 +00:00
|
|
|
check_state_change_return (pipeline, GST_STATE_NULL, GST_STATE_CHANGE_SUCCESS,
|
|
|
|
GST_STATE_CHANGE_SUCCESS);
|
|
|
|
gst_object_unref (pipeline);
|
|
|
|
|
|
|
|
s = "fakesrc can-activate-push=false ! fakesink can-activate-pull=true";
|
|
|
|
pipeline = gst_parse_launch (s, NULL);
|
|
|
|
fail_unless (GST_IS_PIPELINE (pipeline));
|
|
|
|
check_state_change_return (pipeline, GST_STATE_READY,
|
|
|
|
GST_STATE_CHANGE_SUCCESS, GST_STATE_CHANGE_SUCCESS);
|
|
|
|
check_state_change_return (pipeline, GST_STATE_PAUSED,
|
2008-10-10 10:38:12 +00:00
|
|
|
GST_STATE_CHANGE_ASYNC, GST_STATE_CHANGE_SUCCESS);
|
2007-06-19 21:28:54 +00:00
|
|
|
check_state_change_return (pipeline, GST_STATE_PLAYING,
|
|
|
|
GST_STATE_CHANGE_SUCCESS, GST_STATE_CHANGE_SUCCESS);
|
2008-10-10 10:38:12 +00:00
|
|
|
/* can't check PAUSED, it's not deterministic */
|
2007-06-19 21:58:30 +00:00
|
|
|
check_state_change_return (pipeline, GST_STATE_READY,
|
|
|
|
GST_STATE_CHANGE_SUCCESS, GST_STATE_CHANGE_SUCCESS);
|
2007-06-19 21:28:54 +00:00
|
|
|
check_state_change_return (pipeline, GST_STATE_NULL, GST_STATE_CHANGE_SUCCESS,
|
|
|
|
GST_STATE_CHANGE_SUCCESS);
|
|
|
|
gst_object_unref (pipeline);
|
|
|
|
}
|
|
|
|
|
|
|
|
GST_END_TEST;
|
|
|
|
|
2007-02-09 15:25:45 +00:00
|
|
|
G_GNUC_UNUSED
|
2007-02-09 13:45:27 +00:00
|
|
|
GST_START_TEST (test_tee)
|
|
|
|
{
|
2010-03-03 10:45:38 +00:00
|
|
|
const gchar *s;
|
2007-02-09 13:45:27 +00:00
|
|
|
|
|
|
|
s = "fakesrc can-activate-push=true ! tee ! fakesink can-activate-push=true";
|
|
|
|
run_pipeline (setup_pipeline (s), s,
|
2012-07-09 18:29:29 +00:00
|
|
|
GST_MESSAGE_NEW_CLOCK | GST_MESSAGE_STATE_CHANGED |
|
|
|
|
GST_MESSAGE_STREAM_START, GST_MESSAGE_UNKNOWN);
|
2007-02-09 13:45:27 +00:00
|
|
|
|
|
|
|
s = "fakesrc can-activate-push=true num-buffers=10 ! tee ! fakesink can-activate-push=true";
|
|
|
|
run_pipeline (setup_pipeline (s), s,
|
2012-07-09 18:29:29 +00:00
|
|
|
GST_MESSAGE_NEW_CLOCK | GST_MESSAGE_STATE_CHANGED |
|
|
|
|
GST_MESSAGE_STREAM_START, GST_MESSAGE_EOS);
|
2007-02-09 13:45:27 +00:00
|
|
|
|
|
|
|
s = "fakesrc can-activate-push=false can-activate-pull=true ! tee ! fakesink can-activate-pull=true";
|
|
|
|
ASSERT_CRITICAL (run_pipeline (setup_pipeline (s), s,
|
2012-07-09 18:29:29 +00:00
|
|
|
GST_MESSAGE_NEW_CLOCK | GST_MESSAGE_STATE_CHANGED |
|
|
|
|
GST_MESSAGE_STREAM_START, GST_MESSAGE_UNKNOWN));
|
2007-02-09 13:45:27 +00:00
|
|
|
|
|
|
|
s = "fakesrc can-activate-push=false can-activate-pull=true "
|
|
|
|
"! tee pull-mode=single ! fakesink can-activate-pull=true";
|
|
|
|
run_pipeline (setup_pipeline (s), s,
|
2012-07-09 18:29:29 +00:00
|
|
|
GST_MESSAGE_NEW_CLOCK | GST_MESSAGE_STATE_CHANGED |
|
|
|
|
GST_MESSAGE_STREAM_START, GST_MESSAGE_UNKNOWN);
|
2007-02-09 13:45:27 +00:00
|
|
|
|
|
|
|
s = "fakesrc can-activate-push=false can-activate-pull=true num-buffers=10 "
|
|
|
|
"! tee pull-mode=single ! fakesink can-activate-pull=true";
|
|
|
|
run_pipeline (setup_pipeline (s), s,
|
2012-07-09 18:29:29 +00:00
|
|
|
GST_MESSAGE_NEW_CLOCK | GST_MESSAGE_STATE_CHANGED |
|
|
|
|
GST_MESSAGE_STREAM_START, GST_MESSAGE_EOS);
|
2007-02-09 13:45:27 +00:00
|
|
|
|
|
|
|
s = "fakesrc can-activate-push=false can-activate-pull=true "
|
|
|
|
"! tee name=t pull-mode=single ! fakesink can-activate-pull=true "
|
|
|
|
"t. ! queue ! fakesink can-activate-pull=true can-activate-push=false";
|
|
|
|
ASSERT_CRITICAL (run_pipeline (setup_pipeline (s), s,
|
2012-07-09 18:29:29 +00:00
|
|
|
GST_MESSAGE_NEW_CLOCK | GST_MESSAGE_STATE_CHANGED |
|
|
|
|
GST_MESSAGE_STREAM_START, GST_MESSAGE_UNKNOWN));
|
2007-02-09 13:45:27 +00:00
|
|
|
|
|
|
|
s = "fakesrc can-activate-push=false can-activate-pull=true "
|
|
|
|
"! tee name=t pull-mode=single ! fakesink can-activate-pull=true "
|
|
|
|
"t. ! queue ! fakesink";
|
|
|
|
run_pipeline (setup_pipeline (s), s,
|
2012-07-09 18:29:29 +00:00
|
|
|
GST_MESSAGE_NEW_CLOCK | GST_MESSAGE_STATE_CHANGED |
|
|
|
|
GST_MESSAGE_STREAM_START, GST_MESSAGE_UNKNOWN);
|
2007-02-09 13:45:27 +00:00
|
|
|
|
|
|
|
s = "fakesrc can-activate-push=false can-activate-pull=true num-buffers=10 "
|
|
|
|
"! tee name=t pull-mode=single ! fakesink can-activate-pull=true "
|
|
|
|
"t. ! queue ! fakesink";
|
|
|
|
run_pipeline (setup_pipeline (s), s,
|
2012-07-09 18:29:29 +00:00
|
|
|
GST_MESSAGE_NEW_CLOCK | GST_MESSAGE_STATE_CHANGED |
|
|
|
|
GST_MESSAGE_STREAM_START, GST_MESSAGE_EOS);
|
2007-02-09 13:45:27 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
GST_END_TEST;
|
|
|
|
|
2005-09-19 14:41:57 +00:00
|
|
|
static void
|
gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any remaining buffer.
Original commit message from CVS:
2005-06-27 Andy Wingo <wingo@pobox.com>
* gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any
remaining buffer.
* gst/gsttrace.c (gst_alloc_trace_list_sorted): New helper,
returns a sorted copy of the trace list.
(gst_alloc_trace_print_live): New API, only prints traces with
live objects. Sort the list.
(gst_alloc_trace_print_all): Sort the list.
(gst_alloc_trace_print): Align columns.
* gst/elements/gstttypefindelement.c:
* gst/elements/gsttee.c:
* gst/base/gstbasesrc.c:
* gst/base/gstbasesink.c:
* gst/base/gstbasetransform.c:
* gst/gstqueue.c: Adapt for pad activation changes.
* gst/gstpipeline.c (gst_pipeline_init): Unref after parenting
sched.
(gst_pipeline_dispose): Drop ref on sched.
* gst/gstpad.c (gst_pad_init): Set the default activate func.
(gst_pad_activate_default): Push mode by default.
(pre_activate_switch, post_activate_switch): New stubs, things to
do before and after switching activation modes on pads.
(gst_pad_set_active): Take a boolean and not a mode, dispatch to
the pad's activate function to choose which mode to activate.
Shortcut on deactivation and call the right function directly.
(gst_pad_activate_pull): New API, (de)activates a pad in pull
mode.
(gst_pad_activate_push): New API, same for push mode.
(gst_pad_set_activate_function)
(gst_pad_set_activatepull_function)
(gst_pad_set_activatepush_function): Setters for new API.
* gst/gstminiobject.c (gst_mini_object_new, gst_mini_object_free):
Trace all miniobjects.
(gst_mini_object_make_writable): Unref the arg if we copy, like
gst_caps_make_writable.
* gst/gstmessage.c (_gst_message_initialize): No trace init.
* gst/gstghostpad.c (gst_proxy_pad_do_activate)
(gst_proxy_pad_do_activatepull, gst_proxy_pad_do_activatepush):
Adapt for new pad API.
* gst/gstevent.c (_gst_event_initialize): Don't initialize trace.
* gst/gstelement.h:
* gst/gstelement.c (gst_element_iterate_src_pads)
(gst_element_iterate_sink_pads): New API functions.
* gst/gstelement.c (iterator_fold_with_resync): New utility,
should fold into gstiterator.c in some form.
(gst_element_pads_activate): Simplified via use of fold and
delegation of decisions to gstpad->activate.
* gst/gstbus.c (gst_bus_source_finalize): Set the bus to NULL,
help in debugging.
* gst/gstbuffer.c (_gst_buffer_initialize): Ref the buffer type
class once in init, like gstmessage. Didn't run into this issue
but it seems correct. Don't initialize a trace, gstminiobject does
that.
* check/pipelines/simple_launch_lines.c (test_stop_from_app): New
test, runs fakesrc ! fakesink, stopping on ::handoff via a message
to the bus.
(assert_live_count): New util function, uses alloc traces to check
cleanup.
* check/gst/gstghostpad.c (test_ghost_pads): More refcount checks.
To be modified when unlink drops the internal pad.
2005-06-27 18:35:05 +00:00
|
|
|
got_handoff (GstElement * sink, GstBuffer * buf, GstPad * pad, gpointer unused)
|
|
|
|
{
|
|
|
|
gst_element_post_message
|
2011-10-27 14:51:16 +00:00
|
|
|
(sink, gst_message_new_application (NULL,
|
2011-10-29 07:02:00 +00:00
|
|
|
gst_structure_new_empty ("foo")));
|
gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any remaining buffer.
Original commit message from CVS:
2005-06-27 Andy Wingo <wingo@pobox.com>
* gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any
remaining buffer.
* gst/gsttrace.c (gst_alloc_trace_list_sorted): New helper,
returns a sorted copy of the trace list.
(gst_alloc_trace_print_live): New API, only prints traces with
live objects. Sort the list.
(gst_alloc_trace_print_all): Sort the list.
(gst_alloc_trace_print): Align columns.
* gst/elements/gstttypefindelement.c:
* gst/elements/gsttee.c:
* gst/base/gstbasesrc.c:
* gst/base/gstbasesink.c:
* gst/base/gstbasetransform.c:
* gst/gstqueue.c: Adapt for pad activation changes.
* gst/gstpipeline.c (gst_pipeline_init): Unref after parenting
sched.
(gst_pipeline_dispose): Drop ref on sched.
* gst/gstpad.c (gst_pad_init): Set the default activate func.
(gst_pad_activate_default): Push mode by default.
(pre_activate_switch, post_activate_switch): New stubs, things to
do before and after switching activation modes on pads.
(gst_pad_set_active): Take a boolean and not a mode, dispatch to
the pad's activate function to choose which mode to activate.
Shortcut on deactivation and call the right function directly.
(gst_pad_activate_pull): New API, (de)activates a pad in pull
mode.
(gst_pad_activate_push): New API, same for push mode.
(gst_pad_set_activate_function)
(gst_pad_set_activatepull_function)
(gst_pad_set_activatepush_function): Setters for new API.
* gst/gstminiobject.c (gst_mini_object_new, gst_mini_object_free):
Trace all miniobjects.
(gst_mini_object_make_writable): Unref the arg if we copy, like
gst_caps_make_writable.
* gst/gstmessage.c (_gst_message_initialize): No trace init.
* gst/gstghostpad.c (gst_proxy_pad_do_activate)
(gst_proxy_pad_do_activatepull, gst_proxy_pad_do_activatepush):
Adapt for new pad API.
* gst/gstevent.c (_gst_event_initialize): Don't initialize trace.
* gst/gstelement.h:
* gst/gstelement.c (gst_element_iterate_src_pads)
(gst_element_iterate_sink_pads): New API functions.
* gst/gstelement.c (iterator_fold_with_resync): New utility,
should fold into gstiterator.c in some form.
(gst_element_pads_activate): Simplified via use of fold and
delegation of decisions to gstpad->activate.
* gst/gstbus.c (gst_bus_source_finalize): Set the bus to NULL,
help in debugging.
* gst/gstbuffer.c (_gst_buffer_initialize): Ref the buffer type
class once in init, like gstmessage. Didn't run into this issue
but it seems correct. Don't initialize a trace, gstminiobject does
that.
* check/pipelines/simple_launch_lines.c (test_stop_from_app): New
test, runs fakesrc ! fakesink, stopping on ::handoff via a message
to the bus.
(assert_live_count): New util function, uses alloc traces to check
cleanup.
* check/gst/gstghostpad.c (test_ghost_pads): More refcount checks.
To be modified when unlink drops the internal pad.
2005-06-27 18:35:05 +00:00
|
|
|
}
|
|
|
|
|
2005-07-09 16:36:18 +00:00
|
|
|
GST_START_TEST (test_stop_from_app)
|
gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any remaining buffer.
Original commit message from CVS:
2005-06-27 Andy Wingo <wingo@pobox.com>
* gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any
remaining buffer.
* gst/gsttrace.c (gst_alloc_trace_list_sorted): New helper,
returns a sorted copy of the trace list.
(gst_alloc_trace_print_live): New API, only prints traces with
live objects. Sort the list.
(gst_alloc_trace_print_all): Sort the list.
(gst_alloc_trace_print): Align columns.
* gst/elements/gstttypefindelement.c:
* gst/elements/gsttee.c:
* gst/base/gstbasesrc.c:
* gst/base/gstbasesink.c:
* gst/base/gstbasetransform.c:
* gst/gstqueue.c: Adapt for pad activation changes.
* gst/gstpipeline.c (gst_pipeline_init): Unref after parenting
sched.
(gst_pipeline_dispose): Drop ref on sched.
* gst/gstpad.c (gst_pad_init): Set the default activate func.
(gst_pad_activate_default): Push mode by default.
(pre_activate_switch, post_activate_switch): New stubs, things to
do before and after switching activation modes on pads.
(gst_pad_set_active): Take a boolean and not a mode, dispatch to
the pad's activate function to choose which mode to activate.
Shortcut on deactivation and call the right function directly.
(gst_pad_activate_pull): New API, (de)activates a pad in pull
mode.
(gst_pad_activate_push): New API, same for push mode.
(gst_pad_set_activate_function)
(gst_pad_set_activatepull_function)
(gst_pad_set_activatepush_function): Setters for new API.
* gst/gstminiobject.c (gst_mini_object_new, gst_mini_object_free):
Trace all miniobjects.
(gst_mini_object_make_writable): Unref the arg if we copy, like
gst_caps_make_writable.
* gst/gstmessage.c (_gst_message_initialize): No trace init.
* gst/gstghostpad.c (gst_proxy_pad_do_activate)
(gst_proxy_pad_do_activatepull, gst_proxy_pad_do_activatepush):
Adapt for new pad API.
* gst/gstevent.c (_gst_event_initialize): Don't initialize trace.
* gst/gstelement.h:
* gst/gstelement.c (gst_element_iterate_src_pads)
(gst_element_iterate_sink_pads): New API functions.
* gst/gstelement.c (iterator_fold_with_resync): New utility,
should fold into gstiterator.c in some form.
(gst_element_pads_activate): Simplified via use of fold and
delegation of decisions to gstpad->activate.
* gst/gstbus.c (gst_bus_source_finalize): Set the bus to NULL,
help in debugging.
* gst/gstbuffer.c (_gst_buffer_initialize): Ref the buffer type
class once in init, like gstmessage. Didn't run into this issue
but it seems correct. Don't initialize a trace, gstminiobject does
that.
* check/pipelines/simple_launch_lines.c (test_stop_from_app): New
test, runs fakesrc ! fakesink, stopping on ::handoff via a message
to the bus.
(assert_live_count): New util function, uses alloc traces to check
cleanup.
* check/gst/gstghostpad.c (test_ghost_pads): More refcount checks.
To be modified when unlink drops the internal pad.
2005-06-27 18:35:05 +00:00
|
|
|
{
|
|
|
|
GstElement *fakesrc, *fakesink, *pipeline;
|
|
|
|
GstBus *bus;
|
2006-06-21 11:12:24 +00:00
|
|
|
GstStateChangeReturn ret;
|
2005-11-28 21:48:19 +00:00
|
|
|
GstMessageType rmessage;
|
GstBusHandler -> GstBusFunc, return value has the same meaning as any other GSource (FALSE == remove source).
Original commit message from CVS:
* check/gst/gstbin.c: (pop_messages), (GST_START_TEST):
* check/gst/gstbus.c: (message_func_eos), (message_func_app),
(send_messages), (GST_START_TEST), (gstbus_suite):
* check/gst/gstpipeline.c: (GST_START_TEST):
* check/pipelines/cleanup.c: (run_pipeline):
* check/pipelines/simple_launch_lines.c: (run_pipeline),
(GST_START_TEST):
* gst/gstbus.c: (gst_bus_have_pending), (gst_bus_source_prepare),
(gst_bus_source_check), (gst_bus_source_dispatch),
(gst_bus_create_watch), (gst_bus_add_watch_full),
(gst_bus_add_watch), (poll_func), (poll_timeout), (gst_bus_poll):
* gst/gstbus.h:
* tools/gst-launch.c: (event_loop):
* tools/gst-md5sum.c: (event_loop):
GstBusHandler -> GstBusFunc, return value has the same meaning as
any other GSource (FALSE == remove source).
_add_watch() and _add_watch_full() now take a MessageType mask to
only handle specific types of messages.
_poll() returns the GstMessage instead of the message type to avoid
race conditions.
_have_pending() takes a MessageType mask now too.
Added testsuite for multiple bus watches.
Fix testsuites and applications for new bus API.
2005-09-19 11:18:03 +00:00
|
|
|
GstMessage *message;
|
gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any remaining buffer.
Original commit message from CVS:
2005-06-27 Andy Wingo <wingo@pobox.com>
* gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any
remaining buffer.
* gst/gsttrace.c (gst_alloc_trace_list_sorted): New helper,
returns a sorted copy of the trace list.
(gst_alloc_trace_print_live): New API, only prints traces with
live objects. Sort the list.
(gst_alloc_trace_print_all): Sort the list.
(gst_alloc_trace_print): Align columns.
* gst/elements/gstttypefindelement.c:
* gst/elements/gsttee.c:
* gst/base/gstbasesrc.c:
* gst/base/gstbasesink.c:
* gst/base/gstbasetransform.c:
* gst/gstqueue.c: Adapt for pad activation changes.
* gst/gstpipeline.c (gst_pipeline_init): Unref after parenting
sched.
(gst_pipeline_dispose): Drop ref on sched.
* gst/gstpad.c (gst_pad_init): Set the default activate func.
(gst_pad_activate_default): Push mode by default.
(pre_activate_switch, post_activate_switch): New stubs, things to
do before and after switching activation modes on pads.
(gst_pad_set_active): Take a boolean and not a mode, dispatch to
the pad's activate function to choose which mode to activate.
Shortcut on deactivation and call the right function directly.
(gst_pad_activate_pull): New API, (de)activates a pad in pull
mode.
(gst_pad_activate_push): New API, same for push mode.
(gst_pad_set_activate_function)
(gst_pad_set_activatepull_function)
(gst_pad_set_activatepush_function): Setters for new API.
* gst/gstminiobject.c (gst_mini_object_new, gst_mini_object_free):
Trace all miniobjects.
(gst_mini_object_make_writable): Unref the arg if we copy, like
gst_caps_make_writable.
* gst/gstmessage.c (_gst_message_initialize): No trace init.
* gst/gstghostpad.c (gst_proxy_pad_do_activate)
(gst_proxy_pad_do_activatepull, gst_proxy_pad_do_activatepush):
Adapt for new pad API.
* gst/gstevent.c (_gst_event_initialize): Don't initialize trace.
* gst/gstelement.h:
* gst/gstelement.c (gst_element_iterate_src_pads)
(gst_element_iterate_sink_pads): New API functions.
* gst/gstelement.c (iterator_fold_with_resync): New utility,
should fold into gstiterator.c in some form.
(gst_element_pads_activate): Simplified via use of fold and
delegation of decisions to gstpad->activate.
* gst/gstbus.c (gst_bus_source_finalize): Set the bus to NULL,
help in debugging.
* gst/gstbuffer.c (_gst_buffer_initialize): Ref the buffer type
class once in init, like gstmessage. Didn't run into this issue
but it seems correct. Don't initialize a trace, gstminiobject does
that.
* check/pipelines/simple_launch_lines.c (test_stop_from_app): New
test, runs fakesrc ! fakesink, stopping on ::handoff via a message
to the bus.
(assert_live_count): New util function, uses alloc traces to check
cleanup.
* check/gst/gstghostpad.c (test_ghost_pads): More refcount checks.
To be modified when unlink drops the internal pad.
2005-06-27 18:35:05 +00:00
|
|
|
|
|
|
|
fakesrc = gst_element_factory_make ("fakesrc", NULL);
|
|
|
|
fakesink = gst_element_factory_make ("fakesink", NULL);
|
|
|
|
pipeline = gst_element_factory_make ("pipeline", NULL);
|
|
|
|
|
2005-11-28 21:51:37 +00:00
|
|
|
fail_unless (fakesrc && fakesink && pipeline);
|
gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any remaining buffer.
Original commit message from CVS:
2005-06-27 Andy Wingo <wingo@pobox.com>
* gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any
remaining buffer.
* gst/gsttrace.c (gst_alloc_trace_list_sorted): New helper,
returns a sorted copy of the trace list.
(gst_alloc_trace_print_live): New API, only prints traces with
live objects. Sort the list.
(gst_alloc_trace_print_all): Sort the list.
(gst_alloc_trace_print): Align columns.
* gst/elements/gstttypefindelement.c:
* gst/elements/gsttee.c:
* gst/base/gstbasesrc.c:
* gst/base/gstbasesink.c:
* gst/base/gstbasetransform.c:
* gst/gstqueue.c: Adapt for pad activation changes.
* gst/gstpipeline.c (gst_pipeline_init): Unref after parenting
sched.
(gst_pipeline_dispose): Drop ref on sched.
* gst/gstpad.c (gst_pad_init): Set the default activate func.
(gst_pad_activate_default): Push mode by default.
(pre_activate_switch, post_activate_switch): New stubs, things to
do before and after switching activation modes on pads.
(gst_pad_set_active): Take a boolean and not a mode, dispatch to
the pad's activate function to choose which mode to activate.
Shortcut on deactivation and call the right function directly.
(gst_pad_activate_pull): New API, (de)activates a pad in pull
mode.
(gst_pad_activate_push): New API, same for push mode.
(gst_pad_set_activate_function)
(gst_pad_set_activatepull_function)
(gst_pad_set_activatepush_function): Setters for new API.
* gst/gstminiobject.c (gst_mini_object_new, gst_mini_object_free):
Trace all miniobjects.
(gst_mini_object_make_writable): Unref the arg if we copy, like
gst_caps_make_writable.
* gst/gstmessage.c (_gst_message_initialize): No trace init.
* gst/gstghostpad.c (gst_proxy_pad_do_activate)
(gst_proxy_pad_do_activatepull, gst_proxy_pad_do_activatepush):
Adapt for new pad API.
* gst/gstevent.c (_gst_event_initialize): Don't initialize trace.
* gst/gstelement.h:
* gst/gstelement.c (gst_element_iterate_src_pads)
(gst_element_iterate_sink_pads): New API functions.
* gst/gstelement.c (iterator_fold_with_resync): New utility,
should fold into gstiterator.c in some form.
(gst_element_pads_activate): Simplified via use of fold and
delegation of decisions to gstpad->activate.
* gst/gstbus.c (gst_bus_source_finalize): Set the bus to NULL,
help in debugging.
* gst/gstbuffer.c (_gst_buffer_initialize): Ref the buffer type
class once in init, like gstmessage. Didn't run into this issue
but it seems correct. Don't initialize a trace, gstminiobject does
that.
* check/pipelines/simple_launch_lines.c (test_stop_from_app): New
test, runs fakesrc ! fakesink, stopping on ::handoff via a message
to the bus.
(assert_live_count): New util function, uses alloc traces to check
cleanup.
* check/gst/gstghostpad.c (test_ghost_pads): More refcount checks.
To be modified when unlink drops the internal pad.
2005-06-27 18:35:05 +00:00
|
|
|
|
|
|
|
gst_bin_add_many (GST_BIN (pipeline), fakesrc, fakesink, NULL);
|
2006-06-21 11:12:24 +00:00
|
|
|
fail_unless (gst_element_link (fakesrc, fakesink) != FALSE);
|
gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any remaining buffer.
Original commit message from CVS:
2005-06-27 Andy Wingo <wingo@pobox.com>
* gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any
remaining buffer.
* gst/gsttrace.c (gst_alloc_trace_list_sorted): New helper,
returns a sorted copy of the trace list.
(gst_alloc_trace_print_live): New API, only prints traces with
live objects. Sort the list.
(gst_alloc_trace_print_all): Sort the list.
(gst_alloc_trace_print): Align columns.
* gst/elements/gstttypefindelement.c:
* gst/elements/gsttee.c:
* gst/base/gstbasesrc.c:
* gst/base/gstbasesink.c:
* gst/base/gstbasetransform.c:
* gst/gstqueue.c: Adapt for pad activation changes.
* gst/gstpipeline.c (gst_pipeline_init): Unref after parenting
sched.
(gst_pipeline_dispose): Drop ref on sched.
* gst/gstpad.c (gst_pad_init): Set the default activate func.
(gst_pad_activate_default): Push mode by default.
(pre_activate_switch, post_activate_switch): New stubs, things to
do before and after switching activation modes on pads.
(gst_pad_set_active): Take a boolean and not a mode, dispatch to
the pad's activate function to choose which mode to activate.
Shortcut on deactivation and call the right function directly.
(gst_pad_activate_pull): New API, (de)activates a pad in pull
mode.
(gst_pad_activate_push): New API, same for push mode.
(gst_pad_set_activate_function)
(gst_pad_set_activatepull_function)
(gst_pad_set_activatepush_function): Setters for new API.
* gst/gstminiobject.c (gst_mini_object_new, gst_mini_object_free):
Trace all miniobjects.
(gst_mini_object_make_writable): Unref the arg if we copy, like
gst_caps_make_writable.
* gst/gstmessage.c (_gst_message_initialize): No trace init.
* gst/gstghostpad.c (gst_proxy_pad_do_activate)
(gst_proxy_pad_do_activatepull, gst_proxy_pad_do_activatepush):
Adapt for new pad API.
* gst/gstevent.c (_gst_event_initialize): Don't initialize trace.
* gst/gstelement.h:
* gst/gstelement.c (gst_element_iterate_src_pads)
(gst_element_iterate_sink_pads): New API functions.
* gst/gstelement.c (iterator_fold_with_resync): New utility,
should fold into gstiterator.c in some form.
(gst_element_pads_activate): Simplified via use of fold and
delegation of decisions to gstpad->activate.
* gst/gstbus.c (gst_bus_source_finalize): Set the bus to NULL,
help in debugging.
* gst/gstbuffer.c (_gst_buffer_initialize): Ref the buffer type
class once in init, like gstmessage. Didn't run into this issue
but it seems correct. Don't initialize a trace, gstminiobject does
that.
* check/pipelines/simple_launch_lines.c (test_stop_from_app): New
test, runs fakesrc ! fakesink, stopping on ::handoff via a message
to the bus.
(assert_live_count): New util function, uses alloc traces to check
cleanup.
* check/gst/gstghostpad.c (test_ghost_pads): More refcount checks.
To be modified when unlink drops the internal pad.
2005-06-27 18:35:05 +00:00
|
|
|
|
|
|
|
g_object_set (fakesink, "signal-handoffs", (gboolean) TRUE, NULL);
|
|
|
|
g_signal_connect (fakesink, "handoff", G_CALLBACK (got_handoff), NULL);
|
|
|
|
|
2006-06-21 11:12:24 +00:00
|
|
|
gst_element_set_state (pipeline, GST_STATE_PAUSED);
|
|
|
|
ret = gst_element_get_state (pipeline, NULL, NULL, 5 * GST_SECOND);
|
|
|
|
switch (ret) {
|
|
|
|
case GST_STATE_CHANGE_FAILURE:
|
|
|
|
g_error ("Failed to change state to PAUSED");
|
|
|
|
break;
|
|
|
|
case GST_STATE_CHANGE_ASYNC:
|
|
|
|
g_error ("Failed to change state to PAUSED within 5 seconds");
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any remaining buffer.
Original commit message from CVS:
2005-06-27 Andy Wingo <wingo@pobox.com>
* gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any
remaining buffer.
* gst/gsttrace.c (gst_alloc_trace_list_sorted): New helper,
returns a sorted copy of the trace list.
(gst_alloc_trace_print_live): New API, only prints traces with
live objects. Sort the list.
(gst_alloc_trace_print_all): Sort the list.
(gst_alloc_trace_print): Align columns.
* gst/elements/gstttypefindelement.c:
* gst/elements/gsttee.c:
* gst/base/gstbasesrc.c:
* gst/base/gstbasesink.c:
* gst/base/gstbasetransform.c:
* gst/gstqueue.c: Adapt for pad activation changes.
* gst/gstpipeline.c (gst_pipeline_init): Unref after parenting
sched.
(gst_pipeline_dispose): Drop ref on sched.
* gst/gstpad.c (gst_pad_init): Set the default activate func.
(gst_pad_activate_default): Push mode by default.
(pre_activate_switch, post_activate_switch): New stubs, things to
do before and after switching activation modes on pads.
(gst_pad_set_active): Take a boolean and not a mode, dispatch to
the pad's activate function to choose which mode to activate.
Shortcut on deactivation and call the right function directly.
(gst_pad_activate_pull): New API, (de)activates a pad in pull
mode.
(gst_pad_activate_push): New API, same for push mode.
(gst_pad_set_activate_function)
(gst_pad_set_activatepull_function)
(gst_pad_set_activatepush_function): Setters for new API.
* gst/gstminiobject.c (gst_mini_object_new, gst_mini_object_free):
Trace all miniobjects.
(gst_mini_object_make_writable): Unref the arg if we copy, like
gst_caps_make_writable.
* gst/gstmessage.c (_gst_message_initialize): No trace init.
* gst/gstghostpad.c (gst_proxy_pad_do_activate)
(gst_proxy_pad_do_activatepull, gst_proxy_pad_do_activatepush):
Adapt for new pad API.
* gst/gstevent.c (_gst_event_initialize): Don't initialize trace.
* gst/gstelement.h:
* gst/gstelement.c (gst_element_iterate_src_pads)
(gst_element_iterate_sink_pads): New API functions.
* gst/gstelement.c (iterator_fold_with_resync): New utility,
should fold into gstiterator.c in some form.
(gst_element_pads_activate): Simplified via use of fold and
delegation of decisions to gstpad->activate.
* gst/gstbus.c (gst_bus_source_finalize): Set the bus to NULL,
help in debugging.
* gst/gstbuffer.c (_gst_buffer_initialize): Ref the buffer type
class once in init, like gstmessage. Didn't run into this issue
but it seems correct. Don't initialize a trace, gstminiobject does
that.
* check/pipelines/simple_launch_lines.c (test_stop_from_app): New
test, runs fakesrc ! fakesink, stopping on ::handoff via a message
to the bus.
(assert_live_count): New util function, uses alloc traces to check
cleanup.
* check/gst/gstghostpad.c (test_ghost_pads): More refcount checks.
To be modified when unlink drops the internal pad.
2005-06-27 18:35:05 +00:00
|
|
|
gst_element_set_state (pipeline, GST_STATE_PLAYING);
|
|
|
|
|
|
|
|
bus = gst_element_get_bus (pipeline);
|
2005-11-28 21:48:19 +00:00
|
|
|
fail_if (bus == NULL);
|
gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any remaining buffer.
Original commit message from CVS:
2005-06-27 Andy Wingo <wingo@pobox.com>
* gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any
remaining buffer.
* gst/gsttrace.c (gst_alloc_trace_list_sorted): New helper,
returns a sorted copy of the trace list.
(gst_alloc_trace_print_live): New API, only prints traces with
live objects. Sort the list.
(gst_alloc_trace_print_all): Sort the list.
(gst_alloc_trace_print): Align columns.
* gst/elements/gstttypefindelement.c:
* gst/elements/gsttee.c:
* gst/base/gstbasesrc.c:
* gst/base/gstbasesink.c:
* gst/base/gstbasetransform.c:
* gst/gstqueue.c: Adapt for pad activation changes.
* gst/gstpipeline.c (gst_pipeline_init): Unref after parenting
sched.
(gst_pipeline_dispose): Drop ref on sched.
* gst/gstpad.c (gst_pad_init): Set the default activate func.
(gst_pad_activate_default): Push mode by default.
(pre_activate_switch, post_activate_switch): New stubs, things to
do before and after switching activation modes on pads.
(gst_pad_set_active): Take a boolean and not a mode, dispatch to
the pad's activate function to choose which mode to activate.
Shortcut on deactivation and call the right function directly.
(gst_pad_activate_pull): New API, (de)activates a pad in pull
mode.
(gst_pad_activate_push): New API, same for push mode.
(gst_pad_set_activate_function)
(gst_pad_set_activatepull_function)
(gst_pad_set_activatepush_function): Setters for new API.
* gst/gstminiobject.c (gst_mini_object_new, gst_mini_object_free):
Trace all miniobjects.
(gst_mini_object_make_writable): Unref the arg if we copy, like
gst_caps_make_writable.
* gst/gstmessage.c (_gst_message_initialize): No trace init.
* gst/gstghostpad.c (gst_proxy_pad_do_activate)
(gst_proxy_pad_do_activatepull, gst_proxy_pad_do_activatepush):
Adapt for new pad API.
* gst/gstevent.c (_gst_event_initialize): Don't initialize trace.
* gst/gstelement.h:
* gst/gstelement.c (gst_element_iterate_src_pads)
(gst_element_iterate_sink_pads): New API functions.
* gst/gstelement.c (iterator_fold_with_resync): New utility,
should fold into gstiterator.c in some form.
(gst_element_pads_activate): Simplified via use of fold and
delegation of decisions to gstpad->activate.
* gst/gstbus.c (gst_bus_source_finalize): Set the bus to NULL,
help in debugging.
* gst/gstbuffer.c (_gst_buffer_initialize): Ref the buffer type
class once in init, like gstmessage. Didn't run into this issue
but it seems correct. Don't initialize a trace, gstminiobject does
that.
* check/pipelines/simple_launch_lines.c (test_stop_from_app): New
test, runs fakesrc ! fakesink, stopping on ::handoff via a message
to the bus.
(assert_live_count): New util function, uses alloc traces to check
cleanup.
* check/gst/gstghostpad.c (test_ghost_pads): More refcount checks.
To be modified when unlink drops the internal pad.
2005-06-27 18:35:05 +00:00
|
|
|
|
|
|
|
/* will time out after half a second */
|
GstBusHandler -> GstBusFunc, return value has the same meaning as any other GSource (FALSE == remove source).
Original commit message from CVS:
* check/gst/gstbin.c: (pop_messages), (GST_START_TEST):
* check/gst/gstbus.c: (message_func_eos), (message_func_app),
(send_messages), (GST_START_TEST), (gstbus_suite):
* check/gst/gstpipeline.c: (GST_START_TEST):
* check/pipelines/cleanup.c: (run_pipeline):
* check/pipelines/simple_launch_lines.c: (run_pipeline),
(GST_START_TEST):
* gst/gstbus.c: (gst_bus_have_pending), (gst_bus_source_prepare),
(gst_bus_source_check), (gst_bus_source_dispatch),
(gst_bus_create_watch), (gst_bus_add_watch_full),
(gst_bus_add_watch), (poll_func), (poll_timeout), (gst_bus_poll):
* gst/gstbus.h:
* tools/gst-launch.c: (event_loop):
* tools/gst-md5sum.c: (event_loop):
GstBusHandler -> GstBusFunc, return value has the same meaning as
any other GSource (FALSE == remove source).
_add_watch() and _add_watch_full() now take a MessageType mask to
only handle specific types of messages.
_poll() returns the GstMessage instead of the message type to avoid
race conditions.
_have_pending() takes a MessageType mask now too.
Added testsuite for multiple bus watches.
Fix testsuites and applications for new bus API.
2005-09-19 11:18:03 +00:00
|
|
|
message = gst_bus_poll (bus, GST_MESSAGE_APPLICATION, GST_SECOND / 2);
|
|
|
|
if (message) {
|
2005-11-28 21:48:19 +00:00
|
|
|
rmessage = GST_MESSAGE_TYPE (message);
|
GstBusHandler -> GstBusFunc, return value has the same meaning as any other GSource (FALSE == remove source).
Original commit message from CVS:
* check/gst/gstbin.c: (pop_messages), (GST_START_TEST):
* check/gst/gstbus.c: (message_func_eos), (message_func_app),
(send_messages), (GST_START_TEST), (gstbus_suite):
* check/gst/gstpipeline.c: (GST_START_TEST):
* check/pipelines/cleanup.c: (run_pipeline):
* check/pipelines/simple_launch_lines.c: (run_pipeline),
(GST_START_TEST):
* gst/gstbus.c: (gst_bus_have_pending), (gst_bus_source_prepare),
(gst_bus_source_check), (gst_bus_source_dispatch),
(gst_bus_create_watch), (gst_bus_add_watch_full),
(gst_bus_add_watch), (poll_func), (poll_timeout), (gst_bus_poll):
* gst/gstbus.h:
* tools/gst-launch.c: (event_loop):
* tools/gst-md5sum.c: (event_loop):
GstBusHandler -> GstBusFunc, return value has the same meaning as
any other GSource (FALSE == remove source).
_add_watch() and _add_watch_full() now take a MessageType mask to
only handle specific types of messages.
_poll() returns the GstMessage instead of the message type to avoid
race conditions.
_have_pending() takes a MessageType mask now too.
Added testsuite for multiple bus watches.
Fix testsuites and applications for new bus API.
2005-09-19 11:18:03 +00:00
|
|
|
gst_message_unref (message);
|
|
|
|
} else {
|
2005-11-28 21:48:19 +00:00
|
|
|
rmessage = GST_MESSAGE_UNKNOWN;
|
GstBusHandler -> GstBusFunc, return value has the same meaning as any other GSource (FALSE == remove source).
Original commit message from CVS:
* check/gst/gstbin.c: (pop_messages), (GST_START_TEST):
* check/gst/gstbus.c: (message_func_eos), (message_func_app),
(send_messages), (GST_START_TEST), (gstbus_suite):
* check/gst/gstpipeline.c: (GST_START_TEST):
* check/pipelines/cleanup.c: (run_pipeline):
* check/pipelines/simple_launch_lines.c: (run_pipeline),
(GST_START_TEST):
* gst/gstbus.c: (gst_bus_have_pending), (gst_bus_source_prepare),
(gst_bus_source_check), (gst_bus_source_dispatch),
(gst_bus_create_watch), (gst_bus_add_watch_full),
(gst_bus_add_watch), (poll_func), (poll_timeout), (gst_bus_poll):
* gst/gstbus.h:
* tools/gst-launch.c: (event_loop):
* tools/gst-md5sum.c: (event_loop):
GstBusHandler -> GstBusFunc, return value has the same meaning as
any other GSource (FALSE == remove source).
_add_watch() and _add_watch_full() now take a MessageType mask to
only handle specific types of messages.
_poll() returns the GstMessage instead of the message type to avoid
race conditions.
_have_pending() takes a MessageType mask now too.
Added testsuite for multiple bus watches.
Fix testsuites and applications for new bus API.
2005-09-19 11:18:03 +00:00
|
|
|
}
|
2005-11-28 21:51:37 +00:00
|
|
|
fail_unless (rmessage == GST_MESSAGE_APPLICATION,
|
|
|
|
"polled message is not APPLICATION but %s",
|
|
|
|
gst_message_type_get_name (rmessage));
|
gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any remaining buffer.
Original commit message from CVS:
2005-06-27 Andy Wingo <wingo@pobox.com>
* gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any
remaining buffer.
* gst/gsttrace.c (gst_alloc_trace_list_sorted): New helper,
returns a sorted copy of the trace list.
(gst_alloc_trace_print_live): New API, only prints traces with
live objects. Sort the list.
(gst_alloc_trace_print_all): Sort the list.
(gst_alloc_trace_print): Align columns.
* gst/elements/gstttypefindelement.c:
* gst/elements/gsttee.c:
* gst/base/gstbasesrc.c:
* gst/base/gstbasesink.c:
* gst/base/gstbasetransform.c:
* gst/gstqueue.c: Adapt for pad activation changes.
* gst/gstpipeline.c (gst_pipeline_init): Unref after parenting
sched.
(gst_pipeline_dispose): Drop ref on sched.
* gst/gstpad.c (gst_pad_init): Set the default activate func.
(gst_pad_activate_default): Push mode by default.
(pre_activate_switch, post_activate_switch): New stubs, things to
do before and after switching activation modes on pads.
(gst_pad_set_active): Take a boolean and not a mode, dispatch to
the pad's activate function to choose which mode to activate.
Shortcut on deactivation and call the right function directly.
(gst_pad_activate_pull): New API, (de)activates a pad in pull
mode.
(gst_pad_activate_push): New API, same for push mode.
(gst_pad_set_activate_function)
(gst_pad_set_activatepull_function)
(gst_pad_set_activatepush_function): Setters for new API.
* gst/gstminiobject.c (gst_mini_object_new, gst_mini_object_free):
Trace all miniobjects.
(gst_mini_object_make_writable): Unref the arg if we copy, like
gst_caps_make_writable.
* gst/gstmessage.c (_gst_message_initialize): No trace init.
* gst/gstghostpad.c (gst_proxy_pad_do_activate)
(gst_proxy_pad_do_activatepull, gst_proxy_pad_do_activatepush):
Adapt for new pad API.
* gst/gstevent.c (_gst_event_initialize): Don't initialize trace.
* gst/gstelement.h:
* gst/gstelement.c (gst_element_iterate_src_pads)
(gst_element_iterate_sink_pads): New API functions.
* gst/gstelement.c (iterator_fold_with_resync): New utility,
should fold into gstiterator.c in some form.
(gst_element_pads_activate): Simplified via use of fold and
delegation of decisions to gstpad->activate.
* gst/gstbus.c (gst_bus_source_finalize): Set the bus to NULL,
help in debugging.
* gst/gstbuffer.c (_gst_buffer_initialize): Ref the buffer type
class once in init, like gstmessage. Didn't run into this issue
but it seems correct. Don't initialize a trace, gstminiobject does
that.
* check/pipelines/simple_launch_lines.c (test_stop_from_app): New
test, runs fakesrc ! fakesink, stopping on ::handoff via a message
to the bus.
(assert_live_count): New util function, uses alloc traces to check
cleanup.
* check/gst/gstghostpad.c (test_ghost_pads): More refcount checks.
To be modified when unlink drops the internal pad.
2005-06-27 18:35:05 +00:00
|
|
|
|
|
|
|
gst_element_set_state (pipeline, GST_STATE_NULL);
|
2005-06-28 09:59:01 +00:00
|
|
|
gst_object_unref (pipeline);
|
2005-09-19 14:41:57 +00:00
|
|
|
gst_object_unref (bus);
|
gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any remaining buffer.
Original commit message from CVS:
2005-06-27 Andy Wingo <wingo@pobox.com>
* gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any
remaining buffer.
* gst/gsttrace.c (gst_alloc_trace_list_sorted): New helper,
returns a sorted copy of the trace list.
(gst_alloc_trace_print_live): New API, only prints traces with
live objects. Sort the list.
(gst_alloc_trace_print_all): Sort the list.
(gst_alloc_trace_print): Align columns.
* gst/elements/gstttypefindelement.c:
* gst/elements/gsttee.c:
* gst/base/gstbasesrc.c:
* gst/base/gstbasesink.c:
* gst/base/gstbasetransform.c:
* gst/gstqueue.c: Adapt for pad activation changes.
* gst/gstpipeline.c (gst_pipeline_init): Unref after parenting
sched.
(gst_pipeline_dispose): Drop ref on sched.
* gst/gstpad.c (gst_pad_init): Set the default activate func.
(gst_pad_activate_default): Push mode by default.
(pre_activate_switch, post_activate_switch): New stubs, things to
do before and after switching activation modes on pads.
(gst_pad_set_active): Take a boolean and not a mode, dispatch to
the pad's activate function to choose which mode to activate.
Shortcut on deactivation and call the right function directly.
(gst_pad_activate_pull): New API, (de)activates a pad in pull
mode.
(gst_pad_activate_push): New API, same for push mode.
(gst_pad_set_activate_function)
(gst_pad_set_activatepull_function)
(gst_pad_set_activatepush_function): Setters for new API.
* gst/gstminiobject.c (gst_mini_object_new, gst_mini_object_free):
Trace all miniobjects.
(gst_mini_object_make_writable): Unref the arg if we copy, like
gst_caps_make_writable.
* gst/gstmessage.c (_gst_message_initialize): No trace init.
* gst/gstghostpad.c (gst_proxy_pad_do_activate)
(gst_proxy_pad_do_activatepull, gst_proxy_pad_do_activatepush):
Adapt for new pad API.
* gst/gstevent.c (_gst_event_initialize): Don't initialize trace.
* gst/gstelement.h:
* gst/gstelement.c (gst_element_iterate_src_pads)
(gst_element_iterate_sink_pads): New API functions.
* gst/gstelement.c (iterator_fold_with_resync): New utility,
should fold into gstiterator.c in some form.
(gst_element_pads_activate): Simplified via use of fold and
delegation of decisions to gstpad->activate.
* gst/gstbus.c (gst_bus_source_finalize): Set the bus to NULL,
help in debugging.
* gst/gstbuffer.c (_gst_buffer_initialize): Ref the buffer type
class once in init, like gstmessage. Didn't run into this issue
but it seems correct. Don't initialize a trace, gstminiobject does
that.
* check/pipelines/simple_launch_lines.c (test_stop_from_app): New
test, runs fakesrc ! fakesink, stopping on ::handoff via a message
to the bus.
(assert_live_count): New util function, uses alloc traces to check
cleanup.
* check/gst/gstghostpad.c (test_ghost_pads): More refcount checks.
To be modified when unlink drops the internal pad.
2005-06-27 18:35:05 +00:00
|
|
|
}
|
2005-11-28 21:48:19 +00:00
|
|
|
|
|
|
|
GST_END_TEST;
|
|
|
|
|
2013-04-26 23:05:45 +00:00
|
|
|
GST_START_TEST (test_typefind_force_sink_caps)
|
|
|
|
{
|
|
|
|
const gchar *s;
|
|
|
|
|
|
|
|
s = "fakesrc can-activate-push=true num-buffers=5 ! "
|
|
|
|
"typefind force-caps=foo/x-bar ! fakesink can-activate-push=true";
|
|
|
|
ASSERT_CRITICAL (run_pipeline (setup_pipeline (s), s,
|
|
|
|
GST_MESSAGE_NEW_CLOCK | GST_MESSAGE_STATE_CHANGED |
|
|
|
|
GST_MESSAGE_STREAM_STATUS | GST_MESSAGE_ASYNC_DONE |
|
|
|
|
GST_MESSAGE_STREAM_START, GST_MESSAGE_UNKNOWN));
|
|
|
|
}
|
|
|
|
|
|
|
|
GST_END_TEST;
|
|
|
|
|
2008-02-29 13:59:24 +00:00
|
|
|
static Suite *
|
GstBusHandler -> GstBusFunc, return value has the same meaning as any other GSource (FALSE == remove source).
Original commit message from CVS:
* check/gst/gstbin.c: (pop_messages), (GST_START_TEST):
* check/gst/gstbus.c: (message_func_eos), (message_func_app),
(send_messages), (GST_START_TEST), (gstbus_suite):
* check/gst/gstpipeline.c: (GST_START_TEST):
* check/pipelines/cleanup.c: (run_pipeline):
* check/pipelines/simple_launch_lines.c: (run_pipeline),
(GST_START_TEST):
* gst/gstbus.c: (gst_bus_have_pending), (gst_bus_source_prepare),
(gst_bus_source_check), (gst_bus_source_dispatch),
(gst_bus_create_watch), (gst_bus_add_watch_full),
(gst_bus_add_watch), (poll_func), (poll_timeout), (gst_bus_poll):
* gst/gstbus.h:
* tools/gst-launch.c: (event_loop):
* tools/gst-md5sum.c: (event_loop):
GstBusHandler -> GstBusFunc, return value has the same meaning as
any other GSource (FALSE == remove source).
_add_watch() and _add_watch_full() now take a MessageType mask to
only handle specific types of messages.
_poll() returns the GstMessage instead of the message type to avoid
race conditions.
_have_pending() takes a MessageType mask now too.
Added testsuite for multiple bus watches.
Fix testsuites and applications for new bus API.
2005-09-19 11:18:03 +00:00
|
|
|
simple_launch_lines_suite (void)
|
check/: Added checks.
Original commit message from CVS:
* check/.cvsignore:
* check/Makefile.am:
* check/gst-libs/.cvsignore:
* check/gst-libs/gdp.c: (START_TEST), (gst_object_suite), (main):
* check/gst/.cvsignore:
* check/gst/gstbus.c: (pound_bus_with_messages), (pull_messages),
(START_TEST), (gstbus_suite), (main):
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite), (main):
* check/gst/gstdata.c: (START_TEST), (thread_ref), (thread_unref),
(gst_data_suite), (main):
* check/gst/gstiterator.c: (make_list_of_ints), (START_TEST),
(add_fold_func), (gstiterator_suite), (main):
* check/gst/gstobject.c: (gst_fake_object_get_type), (START_TEST),
(thread_name_object), (thread_name_object_default),
(gst_object_name_compare), (gst_object_suite), (main):
* check/gst/gstpad.c: (START_TEST), (thread_link_unlink),
(gst_pad_suite), (main):
* check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_init):
* check/gstcheck.h:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (START_TEST), (simple_launch_lines_suite), (main):
Added checks.
2005-03-07 18:33:37 +00:00
|
|
|
{
|
|
|
|
Suite *s = suite_create ("Pipelines");
|
|
|
|
TCase *tc_chain = tcase_create ("linear");
|
|
|
|
|
|
|
|
/* time out after 20s, not the default 3 */
|
2005-10-10 10:59:33 +00:00
|
|
|
tcase_set_timeout (tc_chain, 0);
|
check/: Added checks.
Original commit message from CVS:
* check/.cvsignore:
* check/Makefile.am:
* check/gst-libs/.cvsignore:
* check/gst-libs/gdp.c: (START_TEST), (gst_object_suite), (main):
* check/gst/.cvsignore:
* check/gst/gstbus.c: (pound_bus_with_messages), (pull_messages),
(START_TEST), (gstbus_suite), (main):
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite), (main):
* check/gst/gstdata.c: (START_TEST), (thread_ref), (thread_unref),
(gst_data_suite), (main):
* check/gst/gstiterator.c: (make_list_of_ints), (START_TEST),
(add_fold_func), (gstiterator_suite), (main):
* check/gst/gstobject.c: (gst_fake_object_get_type), (START_TEST),
(thread_name_object), (thread_name_object_default),
(gst_object_name_compare), (gst_object_suite), (main):
* check/gst/gstpad.c: (START_TEST), (thread_link_unlink),
(gst_pad_suite), (main):
* check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_init):
* check/gstcheck.h:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (START_TEST), (simple_launch_lines_suite), (main):
Added checks.
2005-03-07 18:33:37 +00:00
|
|
|
|
|
|
|
suite_add_tcase (s, tc_chain);
|
|
|
|
tcase_add_test (tc_chain, test_2_elements);
|
2007-06-19 21:28:54 +00:00
|
|
|
tcase_add_test (tc_chain, test_state_change_returns);
|
2007-02-09 15:25:45 +00:00
|
|
|
/* tcase_add_test (tc_chain, test_tee); FIXME */
|
gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any remaining buffer.
Original commit message from CVS:
2005-06-27 Andy Wingo <wingo@pobox.com>
* gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any
remaining buffer.
* gst/gsttrace.c (gst_alloc_trace_list_sorted): New helper,
returns a sorted copy of the trace list.
(gst_alloc_trace_print_live): New API, only prints traces with
live objects. Sort the list.
(gst_alloc_trace_print_all): Sort the list.
(gst_alloc_trace_print): Align columns.
* gst/elements/gstttypefindelement.c:
* gst/elements/gsttee.c:
* gst/base/gstbasesrc.c:
* gst/base/gstbasesink.c:
* gst/base/gstbasetransform.c:
* gst/gstqueue.c: Adapt for pad activation changes.
* gst/gstpipeline.c (gst_pipeline_init): Unref after parenting
sched.
(gst_pipeline_dispose): Drop ref on sched.
* gst/gstpad.c (gst_pad_init): Set the default activate func.
(gst_pad_activate_default): Push mode by default.
(pre_activate_switch, post_activate_switch): New stubs, things to
do before and after switching activation modes on pads.
(gst_pad_set_active): Take a boolean and not a mode, dispatch to
the pad's activate function to choose which mode to activate.
Shortcut on deactivation and call the right function directly.
(gst_pad_activate_pull): New API, (de)activates a pad in pull
mode.
(gst_pad_activate_push): New API, same for push mode.
(gst_pad_set_activate_function)
(gst_pad_set_activatepull_function)
(gst_pad_set_activatepush_function): Setters for new API.
* gst/gstminiobject.c (gst_mini_object_new, gst_mini_object_free):
Trace all miniobjects.
(gst_mini_object_make_writable): Unref the arg if we copy, like
gst_caps_make_writable.
* gst/gstmessage.c (_gst_message_initialize): No trace init.
* gst/gstghostpad.c (gst_proxy_pad_do_activate)
(gst_proxy_pad_do_activatepull, gst_proxy_pad_do_activatepush):
Adapt for new pad API.
* gst/gstevent.c (_gst_event_initialize): Don't initialize trace.
* gst/gstelement.h:
* gst/gstelement.c (gst_element_iterate_src_pads)
(gst_element_iterate_sink_pads): New API functions.
* gst/gstelement.c (iterator_fold_with_resync): New utility,
should fold into gstiterator.c in some form.
(gst_element_pads_activate): Simplified via use of fold and
delegation of decisions to gstpad->activate.
* gst/gstbus.c (gst_bus_source_finalize): Set the bus to NULL,
help in debugging.
* gst/gstbuffer.c (_gst_buffer_initialize): Ref the buffer type
class once in init, like gstmessage. Didn't run into this issue
but it seems correct. Don't initialize a trace, gstminiobject does
that.
* check/pipelines/simple_launch_lines.c (test_stop_from_app): New
test, runs fakesrc ! fakesink, stopping on ::handoff via a message
to the bus.
(assert_live_count): New util function, uses alloc traces to check
cleanup.
* check/gst/gstghostpad.c (test_ghost_pads): More refcount checks.
To be modified when unlink drops the internal pad.
2005-06-27 18:35:05 +00:00
|
|
|
tcase_add_test (tc_chain, test_stop_from_app);
|
2013-04-26 23:05:45 +00:00
|
|
|
tcase_add_test (tc_chain, test_typefind_force_sink_caps);
|
|
|
|
|
check/: Added checks.
Original commit message from CVS:
* check/.cvsignore:
* check/Makefile.am:
* check/gst-libs/.cvsignore:
* check/gst-libs/gdp.c: (START_TEST), (gst_object_suite), (main):
* check/gst/.cvsignore:
* check/gst/gstbus.c: (pound_bus_with_messages), (pull_messages),
(START_TEST), (gstbus_suite), (main):
* check/gst/gstcaps.c: (START_TEST), (gst_caps_suite), (main):
* check/gst/gstdata.c: (START_TEST), (thread_ref), (thread_unref),
(gst_data_suite), (main):
* check/gst/gstiterator.c: (make_list_of_ints), (START_TEST),
(add_fold_func), (gstiterator_suite), (main):
* check/gst/gstobject.c: (gst_fake_object_get_type), (START_TEST),
(thread_name_object), (thread_name_object_default),
(gst_object_name_compare), (gst_object_suite), (main):
* check/gst/gstpad.c: (START_TEST), (thread_link_unlink),
(gst_pad_suite), (main):
* check/gstcheck.c: (gst_check_log_message_func),
(gst_check_log_critical_func), (gst_check_init):
* check/gstcheck.h:
* check/pipelines/simple_launch_lines.c: (setup_pipeline),
(run_pipeline), (START_TEST), (simple_launch_lines_suite), (main):
Added checks.
2005-03-07 18:33:37 +00:00
|
|
|
return s;
|
|
|
|
}
|
|
|
|
|
2006-07-01 20:56:56 +00:00
|
|
|
GST_CHECK_MAIN (simple_launch_lines);
|