gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
/* GStreamer
|
|
|
|
* Copyright (C) 1999,2000 Erik Walthinsen <omega@cse.ogi.edu>
|
|
|
|
* 2000 Wim Taymans <wtay@chello.be>
|
|
|
|
* 2005 Wim Taymans <wim@fluendo.com>
|
2005-08-24 13:33:21 +00:00
|
|
|
* 2005 Andy Wingo <wingo@fluendo.com>
|
|
|
|
* 2005 Thomas Vander Stichele <thomas at apestaart dot org>
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
*
|
|
|
|
* This library is free software; you can redistribute it and/or
|
|
|
|
* modify it under the terms of the GNU Library General Public
|
|
|
|
* License as published by the Free Software Foundation; either
|
|
|
|
* version 2 of the License, or (at your option) any later version.
|
|
|
|
*
|
|
|
|
* This library is distributed in the hope that it will be useful,
|
|
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
|
|
* Library General Public License for more details.
|
|
|
|
*
|
|
|
|
* You should have received a copy of the GNU Library General Public
|
|
|
|
* License along with this library; if not, write to the
|
|
|
|
* Free Software Foundation, Inc., 59 Temple Place - Suite 330,
|
|
|
|
* Boston, MA 02111-1307, USA.
|
|
|
|
*/
|
|
|
|
|
2005-08-03 13:30:18 +00:00
|
|
|
/**
|
|
|
|
* SECTION:gstbasetransform
|
2005-12-06 23:32:01 +00:00
|
|
|
* @short_description: Base class for simple transform filters
|
2005-08-03 13:30:18 +00:00
|
|
|
* @see_also: #GstBaseSrc, #GstBaseSink
|
|
|
|
*
|
|
|
|
* This base class is for filter elements that process data.
|
|
|
|
*
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
* It provides for:
|
2005-08-03 13:30:18 +00:00
|
|
|
* <itemizedlist>
|
|
|
|
* <listitem><para>one sinkpad and one srcpad</para></listitem>
|
|
|
|
* <listitem><para>
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
* Possible formats on sink and source pad implemented
|
2005-08-03 13:30:18 +00:00
|
|
|
* with custom transform_caps function. By default uses
|
|
|
|
* same format on sink and source.
|
|
|
|
* </para></listitem>
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
* <listitem><para>Handles state changes</para></listitem>
|
|
|
|
* <listitem><para>Does flushing</para></listitem>
|
|
|
|
* <listitem><para>Push mode</para></listitem>
|
2005-08-03 13:30:18 +00:00
|
|
|
* <listitem><para>
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
* Pull mode if the sub-class transform can operate on arbitrary data
|
2005-08-03 13:30:18 +00:00
|
|
|
* </para></listitem>
|
|
|
|
* </itemizedlist>
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
*
|
|
|
|
* Use Cases:
|
|
|
|
* <orderedlist>
|
|
|
|
* <listitem>
|
|
|
|
* <itemizedlist><title>Passthrough mode</title>
|
|
|
|
* <listitem><para>
|
|
|
|
* Element has no interest in modifying the buffer. It may want to inspect it,
|
|
|
|
* in which case the element should have a transform_ip function. If there
|
|
|
|
* is no transform_ip function in passthrough mode, the buffer is pushed
|
|
|
|
* intact.
|
|
|
|
* </para></listitem>
|
|
|
|
* <listitem><para>
|
|
|
|
* On the GstBaseTransformClass is the passthrough_on_same_caps variable
|
|
|
|
* which will automatically set/unset passthrough based on whether the
|
|
|
|
* element negotiates the same caps on both pads.
|
|
|
|
* </para></listitem>
|
|
|
|
* <listitem><para>
|
2006-05-03 16:45:11 +00:00
|
|
|
* passthrough_on_same_caps on an element that doesn't implement a
|
|
|
|
* transform_caps function is useful for elements that only inspect data
|
|
|
|
* (such as level)
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
* </para></listitem>
|
|
|
|
* </itemizedlist>
|
|
|
|
* <itemizedlist>
|
|
|
|
* <title>Example elements</title>
|
|
|
|
* <listitem>Level</listitem>
|
2006-05-03 16:45:11 +00:00
|
|
|
* <listitem>Videoscale, audioconvert, ffmpegcolorspace, audioresample in
|
|
|
|
* certain modes.</listitem>
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
* </itemizedlist>
|
|
|
|
* </listitem>
|
|
|
|
* <listitem>
|
2006-05-03 16:45:11 +00:00
|
|
|
* <itemizedlist>
|
|
|
|
* <title>Modifications in-place - input buffer and output buffer are the
|
|
|
|
* same thing.</title>
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
* <listitem><para>
|
|
|
|
* The element must implement a transform_ip function.
|
|
|
|
* </para></listitem>
|
|
|
|
* <listitem><para>
|
|
|
|
* Output buffer size must <= input buffer size
|
|
|
|
* </para></listitem>
|
|
|
|
* <listitem><para>
|
2006-05-03 16:45:11 +00:00
|
|
|
* If the always_in_place flag is set, non-writable buffers will be copied
|
|
|
|
* and passed to the transform_ip function, otherwise a new buffer will be
|
|
|
|
* created and the transform function called.
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
* </para></listitem>
|
|
|
|
* <listitem><para>
|
2006-05-03 16:45:11 +00:00
|
|
|
* Incoming writable buffers will be passed to the transform_ip function
|
|
|
|
* immediately. </para></listitem>
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
* <listitem><para>
|
2006-05-03 16:45:11 +00:00
|
|
|
* only implementing transform_ip and not transform implies always_in_place
|
|
|
|
* = TRUE
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
* </para></listitem>
|
|
|
|
* </itemizedlist>
|
|
|
|
* <itemizedlist>
|
|
|
|
* <title>Example elements</title>
|
|
|
|
* <listitem>Volume</listitem>
|
2006-05-03 16:45:11 +00:00
|
|
|
* <listitem>Audioconvert in certain modes (signed/unsigned
|
|
|
|
* conversion)</listitem>
|
|
|
|
* <listitem>ffmpegcolorspace in certain modes (endianness
|
|
|
|
* swapping)</listitem>
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
* </itemizedlist>
|
|
|
|
* </listitem>
|
|
|
|
* <listitem>
|
2006-05-03 16:45:11 +00:00
|
|
|
* <itemizedlist>
|
|
|
|
* <title>Modifications only to the caps/metadata of a buffer</title>
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
* <listitem><para>
|
2006-05-03 16:45:11 +00:00
|
|
|
* The element does not require writable data, but non-writable buffers
|
|
|
|
* should be subbuffered so that the meta-information can be replaced.
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
* </para></listitem>
|
|
|
|
* <listitem><para>
|
|
|
|
* Elements wishing to operate in this mode should replace the
|
2006-05-03 16:45:11 +00:00
|
|
|
* prepare_output_buffer method to create subbuffers of the input buffer
|
|
|
|
* and set always_in_place to TRUE
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
* </para></listitem>
|
|
|
|
* </itemizedlist>
|
|
|
|
* <itemizedlist>
|
|
|
|
* <title>Example elements</title>
|
2006-05-03 16:45:11 +00:00
|
|
|
* <listitem>Capsfilter when setting caps on outgoing buffers that have
|
|
|
|
* none.</listitem>
|
|
|
|
* <listitem>identity when it is going to re-timestamp buffers by
|
|
|
|
* datarate.</listitem>
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
* </itemizedlist>
|
|
|
|
* </listitem>
|
|
|
|
* <listitem>
|
|
|
|
* <itemizedlist><title>Normal mode</title>
|
|
|
|
* <listitem><para>
|
|
|
|
* always_in_place flag is not set, or there is no transform_ip function
|
|
|
|
* </para></listitem>
|
|
|
|
* <listitem><para>
|
|
|
|
* Element will receive an input buffer and output buffer to operate on.
|
|
|
|
* </para></listitem>
|
|
|
|
* <listitem><para>
|
|
|
|
* Output buffer is allocated by calling the prepare_output_buffer function.
|
|
|
|
* </para></listitem>
|
|
|
|
* </itemizedlist>
|
|
|
|
* <itemizedlist>
|
|
|
|
* <title>Example elements</title>
|
2006-05-03 16:45:11 +00:00
|
|
|
* <listitem>Videoscale, ffmpegcolorspace, audioconvert when doing
|
|
|
|
* scaling/conversions</listitem>
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
* </itemizedlist>
|
|
|
|
* </listitem>
|
|
|
|
* <listitem>
|
|
|
|
* <itemizedlist><title>Special output buffer allocations</title>
|
|
|
|
* <listitem><para>
|
2006-05-03 16:45:11 +00:00
|
|
|
* Elements which need to do special allocation of their output buffers
|
|
|
|
* other than what gst_buffer_pad_alloc allows should implement a
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
* prepare_output_buffer method, which calls the parent implementation and
|
|
|
|
* passes the newly allocated buffer.
|
|
|
|
* </para></listitem>
|
|
|
|
* </itemizedlist>
|
|
|
|
* <itemizedlist>
|
|
|
|
* <title>Example elements</title>
|
|
|
|
* <listitem>efence</listitem>
|
|
|
|
* </itemizedlist>
|
|
|
|
* </listitem>
|
|
|
|
* </orderedlist>
|
|
|
|
*
|
|
|
|
* <itemizedlist><title>Sub-class settable flags on GstBaseTransform</title>
|
|
|
|
* <listitem><para>
|
|
|
|
* <itemizedlist><title>passthrough</title>
|
|
|
|
* <listitem><para>
|
|
|
|
* Implies that in the current configuration, the sub-class is not
|
|
|
|
* interested in modifying the buffers.
|
|
|
|
* </para></listitem>
|
|
|
|
* <listitem><para>
|
2006-05-03 16:45:11 +00:00
|
|
|
* Elements which are always in passthrough mode whenever the same caps
|
|
|
|
* has been negotiated on both pads can set the class variable
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
* passthrough_on_same_caps to have this behaviour automatically.
|
|
|
|
* </para></listitem>
|
|
|
|
* </itemizedlist>
|
|
|
|
* </para></listitem>
|
|
|
|
* <listitem><para>
|
|
|
|
* <itemizedlist><title>always_in_place</title>
|
|
|
|
* <listitem><para>
|
|
|
|
* Determines whether a non-writable buffer will be copied before passing
|
|
|
|
* to the transform_ip function.
|
|
|
|
* </para></listitem>
|
|
|
|
* <listitem><para>
|
|
|
|
* Implied TRUE if no transform function is implemented.
|
|
|
|
* </para></listitem>
|
|
|
|
* <listitem><para>
|
|
|
|
* Implied FALSE if ONLY transform function is implemented.
|
|
|
|
* </para></listitem>
|
|
|
|
* </itemizedlist>
|
|
|
|
* </para></listitem>
|
|
|
|
* </itemizedlist>
|
|
|
|
*
|
2005-08-03 13:30:18 +00:00
|
|
|
*/
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
|
|
|
|
#ifdef HAVE_CONFIG_H
|
|
|
|
# include "config.h"
|
|
|
|
#endif
|
|
|
|
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
#include <stdlib.h>
|
|
|
|
#include <string.h>
|
|
|
|
|
libs/gst/base/gstbasetransform.*: Make basetransform virtual method for src events too.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_sink_event),
(gst_base_transform_sink_eventfunc),
(gst_base_transform_src_event), (gst_base_transform_src_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_change_state), (gst_base_transform_update_qos),
(gst_base_transform_set_qos_enabled),
(gst_base_transform_is_qos_enabled):
* libs/gst/base/gstbasetransform.h:
Make basetransform virtual method for src events too.
Handle QOS in basetransform.
API: gst_base_transform_update_qos
API: gst_base_transform_set_qos_enabled
API: gst_base_transform_is_qos_enabled
2006-03-13 11:27:57 +00:00
|
|
|
#include "../../../gst/gst_private.h"
|
2005-11-29 19:12:30 +00:00
|
|
|
#include "../../../gst/gst-i18n-lib.h"
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
#include "gstbasetransform.h"
|
|
|
|
#include <gst/gstmarshal.h>
|
|
|
|
|
|
|
|
GST_DEBUG_CATEGORY_STATIC (gst_base_transform_debug);
|
|
|
|
#define GST_CAT_DEFAULT gst_base_transform_debug
|
|
|
|
|
|
|
|
/* BaseTransform signals and args */
|
|
|
|
enum
|
|
|
|
{
|
|
|
|
/* FILL ME */
|
|
|
|
LAST_SIGNAL
|
|
|
|
};
|
|
|
|
|
libs/gst/base/gstbasetransform.*: Make basetransform virtual method for src events too.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_sink_event),
(gst_base_transform_sink_eventfunc),
(gst_base_transform_src_event), (gst_base_transform_src_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_change_state), (gst_base_transform_update_qos),
(gst_base_transform_set_qos_enabled),
(gst_base_transform_is_qos_enabled):
* libs/gst/base/gstbasetransform.h:
Make basetransform virtual method for src events too.
Handle QOS in basetransform.
API: gst_base_transform_update_qos
API: gst_base_transform_set_qos_enabled
API: gst_base_transform_is_qos_enabled
2006-03-13 11:27:57 +00:00
|
|
|
#define DEFAULT_PROP_QOS FALSE
|
|
|
|
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
enum
|
|
|
|
{
|
|
|
|
PROP_0,
|
libs/gst/base/gstbasetransform.*: Make basetransform virtual method for src events too.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_sink_event),
(gst_base_transform_sink_eventfunc),
(gst_base_transform_src_event), (gst_base_transform_src_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_change_state), (gst_base_transform_update_qos),
(gst_base_transform_set_qos_enabled),
(gst_base_transform_is_qos_enabled):
* libs/gst/base/gstbasetransform.h:
Make basetransform virtual method for src events too.
Handle QOS in basetransform.
API: gst_base_transform_update_qos
API: gst_base_transform_set_qos_enabled
API: gst_base_transform_is_qos_enabled
2006-03-13 11:27:57 +00:00
|
|
|
PROP_QOS
|
|
|
|
};
|
|
|
|
|
|
|
|
#define GST_BASE_TRANSFORM_GET_PRIVATE(obj) \
|
|
|
|
(G_TYPE_INSTANCE_GET_PRIVATE ((obj), GST_TYPE_BASE_TRANSFORM, GstBaseTransformPrivate))
|
|
|
|
|
|
|
|
struct _GstBaseTransformPrivate
|
|
|
|
{
|
|
|
|
/* QoS *//* with LOCK */
|
|
|
|
gboolean qos_enabled;
|
|
|
|
gdouble proportion;
|
|
|
|
GstClockTime earliest_time;
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
static GstElementClass *parent_class = NULL;
|
|
|
|
|
|
|
|
static void gst_base_transform_base_init (gpointer g_class);
|
|
|
|
static void gst_base_transform_class_init (GstBaseTransformClass * klass);
|
|
|
|
static void gst_base_transform_init (GstBaseTransform * trans,
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
GstBaseTransformClass * klass);
|
libs/gst/base/gstbasetransform.c: Cleanups, separate normal flow from errors, add sensible
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
2006-03-08 10:17:41 +00:00
|
|
|
static GstFlowReturn gst_base_transform_prepare_output_buffer (GstBaseTransform
|
|
|
|
* trans, GstBuffer * input, gint size, GstCaps * caps, GstBuffer ** buf);
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
|
|
|
|
GType
|
|
|
|
gst_base_transform_get_type (void)
|
|
|
|
{
|
|
|
|
static GType base_transform_type = 0;
|
|
|
|
|
|
|
|
if (!base_transform_type) {
|
|
|
|
static const GTypeInfo base_transform_info = {
|
|
|
|
sizeof (GstBaseTransformClass),
|
|
|
|
(GBaseInitFunc) gst_base_transform_base_init,
|
|
|
|
NULL,
|
|
|
|
(GClassInitFunc) gst_base_transform_class_init,
|
|
|
|
NULL,
|
|
|
|
NULL,
|
|
|
|
sizeof (GstBaseTransform),
|
|
|
|
0,
|
|
|
|
(GInstanceInitFunc) gst_base_transform_init,
|
|
|
|
};
|
|
|
|
|
|
|
|
base_transform_type = g_type_register_static (GST_TYPE_ELEMENT,
|
|
|
|
"GstBaseTransform", &base_transform_info, G_TYPE_FLAG_ABSTRACT);
|
|
|
|
}
|
|
|
|
return base_transform_type;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void gst_base_transform_finalize (GObject * object);
|
|
|
|
static void gst_base_transform_set_property (GObject * object, guint prop_id,
|
|
|
|
const GValue * value, GParamSpec * pspec);
|
|
|
|
static void gst_base_transform_get_property (GObject * object, guint prop_id,
|
|
|
|
GValue * value, GParamSpec * pspec);
|
gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any remaining buffer.
Original commit message from CVS:
2005-06-27 Andy Wingo <wingo@pobox.com>
* gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any
remaining buffer.
* gst/gsttrace.c (gst_alloc_trace_list_sorted): New helper,
returns a sorted copy of the trace list.
(gst_alloc_trace_print_live): New API, only prints traces with
live objects. Sort the list.
(gst_alloc_trace_print_all): Sort the list.
(gst_alloc_trace_print): Align columns.
* gst/elements/gstttypefindelement.c:
* gst/elements/gsttee.c:
* gst/base/gstbasesrc.c:
* gst/base/gstbasesink.c:
* gst/base/gstbasetransform.c:
* gst/gstqueue.c: Adapt for pad activation changes.
* gst/gstpipeline.c (gst_pipeline_init): Unref after parenting
sched.
(gst_pipeline_dispose): Drop ref on sched.
* gst/gstpad.c (gst_pad_init): Set the default activate func.
(gst_pad_activate_default): Push mode by default.
(pre_activate_switch, post_activate_switch): New stubs, things to
do before and after switching activation modes on pads.
(gst_pad_set_active): Take a boolean and not a mode, dispatch to
the pad's activate function to choose which mode to activate.
Shortcut on deactivation and call the right function directly.
(gst_pad_activate_pull): New API, (de)activates a pad in pull
mode.
(gst_pad_activate_push): New API, same for push mode.
(gst_pad_set_activate_function)
(gst_pad_set_activatepull_function)
(gst_pad_set_activatepush_function): Setters for new API.
* gst/gstminiobject.c (gst_mini_object_new, gst_mini_object_free):
Trace all miniobjects.
(gst_mini_object_make_writable): Unref the arg if we copy, like
gst_caps_make_writable.
* gst/gstmessage.c (_gst_message_initialize): No trace init.
* gst/gstghostpad.c (gst_proxy_pad_do_activate)
(gst_proxy_pad_do_activatepull, gst_proxy_pad_do_activatepush):
Adapt for new pad API.
* gst/gstevent.c (_gst_event_initialize): Don't initialize trace.
* gst/gstelement.h:
* gst/gstelement.c (gst_element_iterate_src_pads)
(gst_element_iterate_sink_pads): New API functions.
* gst/gstelement.c (iterator_fold_with_resync): New utility,
should fold into gstiterator.c in some form.
(gst_element_pads_activate): Simplified via use of fold and
delegation of decisions to gstpad->activate.
* gst/gstbus.c (gst_bus_source_finalize): Set the bus to NULL,
help in debugging.
* gst/gstbuffer.c (_gst_buffer_initialize): Ref the buffer type
class once in init, like gstmessage. Didn't run into this issue
but it seems correct. Don't initialize a trace, gstminiobject does
that.
* check/pipelines/simple_launch_lines.c (test_stop_from_app): New
test, runs fakesrc ! fakesink, stopping on ::handoff via a message
to the bus.
(assert_live_count): New util function, uses alloc traces to check
cleanup.
* check/gst/gstghostpad.c (test_ghost_pads): More refcount checks.
To be modified when unlink drops the internal pad.
2005-06-27 18:35:05 +00:00
|
|
|
static gboolean gst_base_transform_src_activate_pull (GstPad * pad,
|
|
|
|
gboolean active);
|
|
|
|
static gboolean gst_base_transform_sink_activate_push (GstPad * pad,
|
|
|
|
gboolean active);
|
2005-08-24 13:33:21 +00:00
|
|
|
static gboolean gst_base_transform_get_unit_size (GstBaseTransform * trans,
|
|
|
|
GstCaps * caps, guint * size);
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
|
2005-09-02 15:42:00 +00:00
|
|
|
static GstStateChangeReturn gst_base_transform_change_state (GstElement *
|
|
|
|
element, GstStateChange transition);
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
|
libs/gst/base/gstbasetransform.*: Make basetransform virtual method for src events too.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_sink_event),
(gst_base_transform_sink_eventfunc),
(gst_base_transform_src_event), (gst_base_transform_src_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_change_state), (gst_base_transform_update_qos),
(gst_base_transform_set_qos_enabled),
(gst_base_transform_is_qos_enabled):
* libs/gst/base/gstbasetransform.h:
Make basetransform virtual method for src events too.
Handle QOS in basetransform.
API: gst_base_transform_update_qos
API: gst_base_transform_set_qos_enabled
API: gst_base_transform_is_qos_enabled
2006-03-13 11:27:57 +00:00
|
|
|
static gboolean gst_base_transform_src_event (GstPad * pad, GstEvent * event);
|
|
|
|
static gboolean gst_base_transform_src_eventfunc (GstBaseTransform * trans,
|
|
|
|
GstEvent * event);
|
|
|
|
static gboolean gst_base_transform_sink_event (GstPad * pad, GstEvent * event);
|
|
|
|
static gboolean gst_base_transform_sink_eventfunc (GstBaseTransform * trans,
|
gst/base/gstbasetransform.c: The event virtual method is now properly implemented, with a default handler
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_event), (gst_base_transform_eventfunc):
The event virtual method is now properly implemented, with a default
handler
Sub classes should call the parent_class event method. They should
return FALSE if they had a problem handling the given event, or don't
want GstBaseTransform to send that even downstream
* gst/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_init), (gst_identity_event),
(gst_identity_transform_ip), (gst_identity_set_property),
(gst_identity_get_property):
* gst/elements/gstidentity.h:
Added the single-segment boolean property.
If set to TRUE, it will output a single segment of data, starting from
0, will eat up all incoming newsegment, and modify the timestamp of the
buffers accordingly
2005-11-29 14:47:07 +00:00
|
|
|
GstEvent * event);
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
static GstFlowReturn gst_base_transform_getrange (GstPad * pad, guint64 offset,
|
|
|
|
guint length, GstBuffer ** buffer);
|
|
|
|
static GstFlowReturn gst_base_transform_chain (GstPad * pad,
|
|
|
|
GstBuffer * buffer);
|
tests/network-clock.scm: Commentary update.
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
2005-07-01 16:46:59 +00:00
|
|
|
static GstCaps *gst_base_transform_getcaps (GstPad * pad);
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
static gboolean gst_base_transform_setcaps (GstPad * pad, GstCaps * caps);
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
static GstFlowReturn gst_base_transform_buffer_alloc (GstPad * pad,
|
|
|
|
guint64 offset, guint size, GstCaps * caps, GstBuffer ** buf);
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
|
|
|
|
/* static guint gst_base_transform_signals[LAST_SIGNAL] = { 0 }; */
|
|
|
|
|
|
|
|
static void
|
|
|
|
gst_base_transform_base_init (gpointer g_class)
|
|
|
|
{
|
|
|
|
GST_DEBUG_CATEGORY_INIT (gst_base_transform_debug, "basetransform", 0,
|
|
|
|
"basetransform element");
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
gst_base_transform_finalize (GObject * object)
|
|
|
|
{
|
2005-10-27 20:59:00 +00:00
|
|
|
GstBaseTransform *trans;
|
|
|
|
|
|
|
|
trans = GST_BASE_TRANSFORM (object);
|
|
|
|
|
|
|
|
g_mutex_free (trans->transform_lock);
|
|
|
|
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
G_OBJECT_CLASS (parent_class)->finalize (object);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
gst_base_transform_class_init (GstBaseTransformClass * klass)
|
|
|
|
{
|
|
|
|
GObjectClass *gobject_class;
|
|
|
|
GstElementClass *gstelement_class;
|
|
|
|
|
|
|
|
gobject_class = G_OBJECT_CLASS (klass);
|
|
|
|
gstelement_class = GST_ELEMENT_CLASS (klass);
|
|
|
|
|
libs/gst/base/gstbasetransform.*: Make basetransform virtual method for src events too.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_sink_event),
(gst_base_transform_sink_eventfunc),
(gst_base_transform_src_event), (gst_base_transform_src_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_change_state), (gst_base_transform_update_qos),
(gst_base_transform_set_qos_enabled),
(gst_base_transform_is_qos_enabled):
* libs/gst/base/gstbasetransform.h:
Make basetransform virtual method for src events too.
Handle QOS in basetransform.
API: gst_base_transform_update_qos
API: gst_base_transform_set_qos_enabled
API: gst_base_transform_is_qos_enabled
2006-03-13 11:27:57 +00:00
|
|
|
g_type_class_add_private (klass, sizeof (GstBaseTransformPrivate));
|
|
|
|
|
2005-10-28 10:45:33 +00:00
|
|
|
parent_class = g_type_class_peek_parent (klass);
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
|
|
|
|
gobject_class->set_property =
|
|
|
|
GST_DEBUG_FUNCPTR (gst_base_transform_set_property);
|
|
|
|
gobject_class->get_property =
|
|
|
|
GST_DEBUG_FUNCPTR (gst_base_transform_get_property);
|
|
|
|
|
2006-05-11 18:10:34 +00:00
|
|
|
g_object_class_install_property (gobject_class, PROP_QOS,
|
libs/gst/base/gstbasetransform.*: Make basetransform virtual method for src events too.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_sink_event),
(gst_base_transform_sink_eventfunc),
(gst_base_transform_src_event), (gst_base_transform_src_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_change_state), (gst_base_transform_update_qos),
(gst_base_transform_set_qos_enabled),
(gst_base_transform_is_qos_enabled):
* libs/gst/base/gstbasetransform.h:
Make basetransform virtual method for src events too.
Handle QOS in basetransform.
API: gst_base_transform_update_qos
API: gst_base_transform_set_qos_enabled
API: gst_base_transform_is_qos_enabled
2006-03-13 11:27:57 +00:00
|
|
|
g_param_spec_boolean ("qos", "QoS", "handle QoS messages",
|
|
|
|
DEFAULT_PROP_QOS, G_PARAM_READWRITE));
|
|
|
|
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
gobject_class->finalize = GST_DEBUG_FUNCPTR (gst_base_transform_finalize);
|
|
|
|
|
|
|
|
gstelement_class->change_state =
|
|
|
|
GST_DEBUG_FUNCPTR (gst_base_transform_change_state);
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
|
|
|
|
klass->passthrough_on_same_caps = FALSE;
|
libs/gst/base/gstbasetransform.*: Make basetransform virtual method for src events too.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_sink_event),
(gst_base_transform_sink_eventfunc),
(gst_base_transform_src_event), (gst_base_transform_src_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_change_state), (gst_base_transform_update_qos),
(gst_base_transform_set_qos_enabled),
(gst_base_transform_is_qos_enabled):
* libs/gst/base/gstbasetransform.h:
Make basetransform virtual method for src events too.
Handle QOS in basetransform.
API: gst_base_transform_update_qos
API: gst_base_transform_set_qos_enabled
API: gst_base_transform_is_qos_enabled
2006-03-13 11:27:57 +00:00
|
|
|
klass->event = GST_DEBUG_FUNCPTR (gst_base_transform_sink_eventfunc);
|
|
|
|
klass->src_event = GST_DEBUG_FUNCPTR (gst_base_transform_src_eventfunc);
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
gst_base_transform_init (GstBaseTransform * trans,
|
|
|
|
GstBaseTransformClass * bclass)
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
{
|
|
|
|
GstPadTemplate *pad_template;
|
|
|
|
|
|
|
|
GST_DEBUG ("gst_base_transform_init");
|
|
|
|
|
libs/gst/base/gstbasetransform.*: Make basetransform virtual method for src events too.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_sink_event),
(gst_base_transform_sink_eventfunc),
(gst_base_transform_src_event), (gst_base_transform_src_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_change_state), (gst_base_transform_update_qos),
(gst_base_transform_set_qos_enabled),
(gst_base_transform_is_qos_enabled):
* libs/gst/base/gstbasetransform.h:
Make basetransform virtual method for src events too.
Handle QOS in basetransform.
API: gst_base_transform_update_qos
API: gst_base_transform_set_qos_enabled
API: gst_base_transform_is_qos_enabled
2006-03-13 11:27:57 +00:00
|
|
|
trans->priv = GST_BASE_TRANSFORM_GET_PRIVATE (trans);
|
|
|
|
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
pad_template =
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
gst_element_class_get_pad_template (GST_ELEMENT_CLASS (bclass), "sink");
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
g_return_if_fail (pad_template != NULL);
|
|
|
|
trans->sinkpad = gst_pad_new_from_template (pad_template, "sink");
|
|
|
|
gst_pad_set_getcaps_function (trans->sinkpad,
|
tests/network-clock.scm: Commentary update.
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
2005-07-01 16:46:59 +00:00
|
|
|
GST_DEBUG_FUNCPTR (gst_base_transform_getcaps));
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
gst_pad_set_setcaps_function (trans->sinkpad,
|
|
|
|
GST_DEBUG_FUNCPTR (gst_base_transform_setcaps));
|
|
|
|
gst_pad_set_event_function (trans->sinkpad,
|
libs/gst/base/gstbasetransform.*: Make basetransform virtual method for src events too.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_sink_event),
(gst_base_transform_sink_eventfunc),
(gst_base_transform_src_event), (gst_base_transform_src_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_change_state), (gst_base_transform_update_qos),
(gst_base_transform_set_qos_enabled),
(gst_base_transform_is_qos_enabled):
* libs/gst/base/gstbasetransform.h:
Make basetransform virtual method for src events too.
Handle QOS in basetransform.
API: gst_base_transform_update_qos
API: gst_base_transform_set_qos_enabled
API: gst_base_transform_is_qos_enabled
2006-03-13 11:27:57 +00:00
|
|
|
GST_DEBUG_FUNCPTR (gst_base_transform_sink_event));
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
gst_pad_set_chain_function (trans->sinkpad,
|
|
|
|
GST_DEBUG_FUNCPTR (gst_base_transform_chain));
|
gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any remaining buffer.
Original commit message from CVS:
2005-06-27 Andy Wingo <wingo@pobox.com>
* gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any
remaining buffer.
* gst/gsttrace.c (gst_alloc_trace_list_sorted): New helper,
returns a sorted copy of the trace list.
(gst_alloc_trace_print_live): New API, only prints traces with
live objects. Sort the list.
(gst_alloc_trace_print_all): Sort the list.
(gst_alloc_trace_print): Align columns.
* gst/elements/gstttypefindelement.c:
* gst/elements/gsttee.c:
* gst/base/gstbasesrc.c:
* gst/base/gstbasesink.c:
* gst/base/gstbasetransform.c:
* gst/gstqueue.c: Adapt for pad activation changes.
* gst/gstpipeline.c (gst_pipeline_init): Unref after parenting
sched.
(gst_pipeline_dispose): Drop ref on sched.
* gst/gstpad.c (gst_pad_init): Set the default activate func.
(gst_pad_activate_default): Push mode by default.
(pre_activate_switch, post_activate_switch): New stubs, things to
do before and after switching activation modes on pads.
(gst_pad_set_active): Take a boolean and not a mode, dispatch to
the pad's activate function to choose which mode to activate.
Shortcut on deactivation and call the right function directly.
(gst_pad_activate_pull): New API, (de)activates a pad in pull
mode.
(gst_pad_activate_push): New API, same for push mode.
(gst_pad_set_activate_function)
(gst_pad_set_activatepull_function)
(gst_pad_set_activatepush_function): Setters for new API.
* gst/gstminiobject.c (gst_mini_object_new, gst_mini_object_free):
Trace all miniobjects.
(gst_mini_object_make_writable): Unref the arg if we copy, like
gst_caps_make_writable.
* gst/gstmessage.c (_gst_message_initialize): No trace init.
* gst/gstghostpad.c (gst_proxy_pad_do_activate)
(gst_proxy_pad_do_activatepull, gst_proxy_pad_do_activatepush):
Adapt for new pad API.
* gst/gstevent.c (_gst_event_initialize): Don't initialize trace.
* gst/gstelement.h:
* gst/gstelement.c (gst_element_iterate_src_pads)
(gst_element_iterate_sink_pads): New API functions.
* gst/gstelement.c (iterator_fold_with_resync): New utility,
should fold into gstiterator.c in some form.
(gst_element_pads_activate): Simplified via use of fold and
delegation of decisions to gstpad->activate.
* gst/gstbus.c (gst_bus_source_finalize): Set the bus to NULL,
help in debugging.
* gst/gstbuffer.c (_gst_buffer_initialize): Ref the buffer type
class once in init, like gstmessage. Didn't run into this issue
but it seems correct. Don't initialize a trace, gstminiobject does
that.
* check/pipelines/simple_launch_lines.c (test_stop_from_app): New
test, runs fakesrc ! fakesink, stopping on ::handoff via a message
to the bus.
(assert_live_count): New util function, uses alloc traces to check
cleanup.
* check/gst/gstghostpad.c (test_ghost_pads): More refcount checks.
To be modified when unlink drops the internal pad.
2005-06-27 18:35:05 +00:00
|
|
|
gst_pad_set_activatepush_function (trans->sinkpad,
|
|
|
|
GST_DEBUG_FUNCPTR (gst_base_transform_sink_activate_push));
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
gst_pad_set_bufferalloc_function (trans->sinkpad,
|
|
|
|
GST_DEBUG_FUNCPTR (gst_base_transform_buffer_alloc));
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
gst_element_add_pad (GST_ELEMENT (trans), trans->sinkpad);
|
|
|
|
|
|
|
|
pad_template =
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
gst_element_class_get_pad_template (GST_ELEMENT_CLASS (bclass), "src");
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
g_return_if_fail (pad_template != NULL);
|
|
|
|
trans->srcpad = gst_pad_new_from_template (pad_template, "src");
|
|
|
|
gst_pad_set_getcaps_function (trans->srcpad,
|
tests/network-clock.scm: Commentary update.
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
2005-07-01 16:46:59 +00:00
|
|
|
GST_DEBUG_FUNCPTR (gst_base_transform_getcaps));
|
|
|
|
gst_pad_set_setcaps_function (trans->srcpad,
|
|
|
|
GST_DEBUG_FUNCPTR (gst_base_transform_setcaps));
|
libs/gst/base/gstbasetransform.*: Make basetransform virtual method for src events too.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_sink_event),
(gst_base_transform_sink_eventfunc),
(gst_base_transform_src_event), (gst_base_transform_src_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_change_state), (gst_base_transform_update_qos),
(gst_base_transform_set_qos_enabled),
(gst_base_transform_is_qos_enabled):
* libs/gst/base/gstbasetransform.h:
Make basetransform virtual method for src events too.
Handle QOS in basetransform.
API: gst_base_transform_update_qos
API: gst_base_transform_set_qos_enabled
API: gst_base_transform_is_qos_enabled
2006-03-13 11:27:57 +00:00
|
|
|
gst_pad_set_event_function (trans->srcpad,
|
|
|
|
GST_DEBUG_FUNCPTR (gst_base_transform_src_event));
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
gst_pad_set_getrange_function (trans->srcpad,
|
|
|
|
GST_DEBUG_FUNCPTR (gst_base_transform_getrange));
|
gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any remaining buffer.
Original commit message from CVS:
2005-06-27 Andy Wingo <wingo@pobox.com>
* gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any
remaining buffer.
* gst/gsttrace.c (gst_alloc_trace_list_sorted): New helper,
returns a sorted copy of the trace list.
(gst_alloc_trace_print_live): New API, only prints traces with
live objects. Sort the list.
(gst_alloc_trace_print_all): Sort the list.
(gst_alloc_trace_print): Align columns.
* gst/elements/gstttypefindelement.c:
* gst/elements/gsttee.c:
* gst/base/gstbasesrc.c:
* gst/base/gstbasesink.c:
* gst/base/gstbasetransform.c:
* gst/gstqueue.c: Adapt for pad activation changes.
* gst/gstpipeline.c (gst_pipeline_init): Unref after parenting
sched.
(gst_pipeline_dispose): Drop ref on sched.
* gst/gstpad.c (gst_pad_init): Set the default activate func.
(gst_pad_activate_default): Push mode by default.
(pre_activate_switch, post_activate_switch): New stubs, things to
do before and after switching activation modes on pads.
(gst_pad_set_active): Take a boolean and not a mode, dispatch to
the pad's activate function to choose which mode to activate.
Shortcut on deactivation and call the right function directly.
(gst_pad_activate_pull): New API, (de)activates a pad in pull
mode.
(gst_pad_activate_push): New API, same for push mode.
(gst_pad_set_activate_function)
(gst_pad_set_activatepull_function)
(gst_pad_set_activatepush_function): Setters for new API.
* gst/gstminiobject.c (gst_mini_object_new, gst_mini_object_free):
Trace all miniobjects.
(gst_mini_object_make_writable): Unref the arg if we copy, like
gst_caps_make_writable.
* gst/gstmessage.c (_gst_message_initialize): No trace init.
* gst/gstghostpad.c (gst_proxy_pad_do_activate)
(gst_proxy_pad_do_activatepull, gst_proxy_pad_do_activatepush):
Adapt for new pad API.
* gst/gstevent.c (_gst_event_initialize): Don't initialize trace.
* gst/gstelement.h:
* gst/gstelement.c (gst_element_iterate_src_pads)
(gst_element_iterate_sink_pads): New API functions.
* gst/gstelement.c (iterator_fold_with_resync): New utility,
should fold into gstiterator.c in some form.
(gst_element_pads_activate): Simplified via use of fold and
delegation of decisions to gstpad->activate.
* gst/gstbus.c (gst_bus_source_finalize): Set the bus to NULL,
help in debugging.
* gst/gstbuffer.c (_gst_buffer_initialize): Ref the buffer type
class once in init, like gstmessage. Didn't run into this issue
but it seems correct. Don't initialize a trace, gstminiobject does
that.
* check/pipelines/simple_launch_lines.c (test_stop_from_app): New
test, runs fakesrc ! fakesink, stopping on ::handoff via a message
to the bus.
(assert_live_count): New util function, uses alloc traces to check
cleanup.
* check/gst/gstghostpad.c (test_ghost_pads): More refcount checks.
To be modified when unlink drops the internal pad.
2005-06-27 18:35:05 +00:00
|
|
|
gst_pad_set_activatepull_function (trans->srcpad,
|
|
|
|
GST_DEBUG_FUNCPTR (gst_base_transform_src_activate_pull));
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
gst_element_add_pad (GST_ELEMENT (trans), trans->srcpad);
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
|
2005-10-27 20:59:00 +00:00
|
|
|
trans->transform_lock = g_mutex_new ();
|
2005-08-24 11:44:24 +00:00
|
|
|
trans->delay_configure = FALSE;
|
|
|
|
trans->pending_configure = FALSE;
|
libs/gst/base/gstbasetransform.*: Make basetransform virtual method for src events too.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_sink_event),
(gst_base_transform_sink_eventfunc),
(gst_base_transform_src_event), (gst_base_transform_src_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_change_state), (gst_base_transform_update_qos),
(gst_base_transform_set_qos_enabled),
(gst_base_transform_is_qos_enabled):
* libs/gst/base/gstbasetransform.h:
Make basetransform virtual method for src events too.
Handle QOS in basetransform.
API: gst_base_transform_update_qos
API: gst_base_transform_set_qos_enabled
API: gst_base_transform_is_qos_enabled
2006-03-13 11:27:57 +00:00
|
|
|
trans->priv->qos_enabled = DEFAULT_PROP_QOS;
|
2005-08-25 19:36:05 +00:00
|
|
|
trans->cache_caps1 = NULL;
|
|
|
|
trans->cache_caps2 = NULL;
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
|
|
|
|
trans->passthrough = FALSE;
|
|
|
|
if (bclass->transform == NULL) {
|
|
|
|
/* If no transform function, always_in_place is TRUE */
|
|
|
|
GST_DEBUG_OBJECT (trans, "setting in_place TRUE");
|
|
|
|
trans->always_in_place = TRUE;
|
|
|
|
|
|
|
|
if (bclass->transform_ip == NULL)
|
|
|
|
trans->passthrough = TRUE;
|
|
|
|
}
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
}
|
|
|
|
|
libs/gst/base/gstbasetransform.c: Cleanups, separate normal flow from errors, add sensible
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
2006-03-08 10:17:41 +00:00
|
|
|
/* given @caps on the src or sink pad (given by @direction)
|
|
|
|
* calculate the possible caps on the other pad.
|
|
|
|
*
|
|
|
|
* Returns new caps, unref after usage.
|
|
|
|
*/
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
static GstCaps *
|
2005-08-24 13:33:21 +00:00
|
|
|
gst_base_transform_transform_caps (GstBaseTransform * trans,
|
|
|
|
GstPadDirection direction, GstCaps * caps)
|
tests/network-clock.scm: Commentary update.
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
2005-07-01 16:46:59 +00:00
|
|
|
{
|
2005-07-05 08:47:40 +00:00
|
|
|
GstCaps *ret;
|
tests/network-clock.scm: Commentary update.
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
2005-07-01 16:46:59 +00:00
|
|
|
GstBaseTransformClass *klass;
|
|
|
|
|
|
|
|
klass = GST_BASE_TRANSFORM_GET_CLASS (trans);
|
|
|
|
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
/* if there is a custom transform function, use this */
|
|
|
|
if (klass->transform_caps) {
|
|
|
|
GstCaps *temp;
|
|
|
|
gint i;
|
|
|
|
|
libs/gst/base/gstbasetransform.c: Cleanups, separate normal flow from errors, add sensible
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
2006-03-08 10:17:41 +00:00
|
|
|
/* start with empty caps */
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
ret = gst_caps_new_empty ();
|
|
|
|
|
2005-08-22 19:48:46 +00:00
|
|
|
if (gst_caps_is_any (caps)) {
|
|
|
|
/* for any caps we still have to call the transform function */
|
|
|
|
GST_DEBUG_OBJECT (trans, "from ANY:");
|
2005-08-24 13:33:21 +00:00
|
|
|
temp = klass->transform_caps (trans, direction, caps);
|
2005-08-22 19:48:46 +00:00
|
|
|
GST_DEBUG_OBJECT (trans, " to: %" GST_PTR_FORMAT, temp);
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
|
2006-03-05 20:56:55 +00:00
|
|
|
temp = gst_caps_make_writable (temp);
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
gst_caps_append (ret, temp);
|
2005-08-22 19:48:46 +00:00
|
|
|
} else {
|
2005-08-24 11:44:24 +00:00
|
|
|
/* we send caps with just one structure to the transform
|
2005-08-22 19:48:46 +00:00
|
|
|
* function as this is easier for the element */
|
|
|
|
for (i = 0; i < gst_caps_get_size (caps); i++) {
|
|
|
|
GstCaps *nth;
|
|
|
|
|
|
|
|
nth = gst_caps_copy_nth (caps, i);
|
|
|
|
GST_DEBUG_OBJECT (trans, "from[%d]: %" GST_PTR_FORMAT, i, nth);
|
2005-08-24 13:33:21 +00:00
|
|
|
temp = klass->transform_caps (trans, direction, nth);
|
2005-08-22 19:48:46 +00:00
|
|
|
gst_caps_unref (nth);
|
|
|
|
GST_DEBUG_OBJECT (trans, " to[%d]: %" GST_PTR_FORMAT, i, temp);
|
|
|
|
|
2006-03-05 20:56:55 +00:00
|
|
|
temp = gst_caps_make_writable (temp);
|
2005-08-22 19:48:46 +00:00
|
|
|
gst_caps_append (ret, temp);
|
|
|
|
}
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
}
|
|
|
|
} else {
|
|
|
|
/* else use the identity transform */
|
2005-07-05 08:47:40 +00:00
|
|
|
ret = gst_caps_ref (caps);
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
}
|
2005-07-05 08:47:40 +00:00
|
|
|
|
|
|
|
GST_DEBUG_OBJECT (trans, "to: %" GST_PTR_FORMAT, ret);
|
|
|
|
|
|
|
|
return ret;
|
tests/network-clock.scm: Commentary update.
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
2005-07-01 16:46:59 +00:00
|
|
|
}
|
|
|
|
|
2005-08-25 19:36:05 +00:00
|
|
|
static gboolean
|
2005-08-24 11:44:24 +00:00
|
|
|
gst_base_transform_transform_size (GstBaseTransform * trans,
|
2005-08-24 13:33:21 +00:00
|
|
|
GstPadDirection direction, GstCaps * caps,
|
|
|
|
guint size, GstCaps * othercaps, guint * othersize)
|
2005-08-24 11:44:24 +00:00
|
|
|
{
|
|
|
|
guint inunitsize, outunitsize, units;
|
|
|
|
GstBaseTransformClass *klass;
|
libs/gst/base/gstbasetransform.c: Cleanups, separate normal flow from errors, add sensible
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
2006-03-08 10:17:41 +00:00
|
|
|
gboolean ret;
|
2005-08-24 11:44:24 +00:00
|
|
|
|
|
|
|
klass = GST_BASE_TRANSFORM_GET_CLASS (trans);
|
|
|
|
|
2005-08-26 11:19:22 +00:00
|
|
|
GST_DEBUG_OBJECT (trans, "asked to transform size %d for caps %"
|
|
|
|
GST_PTR_FORMAT " to size for caps %" GST_PTR_FORMAT " in direction %s",
|
|
|
|
size, caps, othercaps, direction == GST_PAD_SRC ? "SRC" : "SINK");
|
2005-08-24 11:44:24 +00:00
|
|
|
|
|
|
|
/* if there is a custom transform function, use this */
|
|
|
|
if (klass->transform_size) {
|
2005-08-24 13:33:21 +00:00
|
|
|
ret = klass->transform_size (trans, direction, caps, size, othercaps,
|
|
|
|
othersize);
|
2005-08-24 11:44:24 +00:00
|
|
|
} else {
|
libs/gst/base/gstbasetransform.c: Cleanups, separate normal flow from errors, add sensible
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
2006-03-08 10:17:41 +00:00
|
|
|
if (!gst_base_transform_get_unit_size (trans, caps, &inunitsize))
|
|
|
|
goto no_in_size;
|
2005-09-21 11:52:04 +00:00
|
|
|
|
2005-08-26 11:19:22 +00:00
|
|
|
GST_DEBUG_OBJECT (trans, "input size %d, input unit size %d", size,
|
|
|
|
inunitsize);
|
libs/gst/base/gstbasetransform.c: Cleanups, separate normal flow from errors, add sensible
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
2006-03-08 10:17:41 +00:00
|
|
|
|
|
|
|
if (inunitsize == 0 || (size % inunitsize != 0))
|
|
|
|
goto no_multiple;
|
2005-08-24 13:33:21 +00:00
|
|
|
|
|
|
|
units = size / inunitsize;
|
libs/gst/base/gstbasetransform.c: Cleanups, separate normal flow from errors, add sensible
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
2006-03-08 10:17:41 +00:00
|
|
|
if (!gst_base_transform_get_unit_size (trans, othercaps, &outunitsize))
|
|
|
|
goto no_out_size;
|
2005-08-25 19:36:05 +00:00
|
|
|
|
|
|
|
*othersize = units * outunitsize;
|
|
|
|
GST_DEBUG_OBJECT (trans, "transformed size to %d", *othersize);
|
2005-08-24 11:44:24 +00:00
|
|
|
|
libs/gst/base/gstbasetransform.c: Cleanups, separate normal flow from errors, add sensible
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
2006-03-08 10:17:41 +00:00
|
|
|
ret = TRUE;
|
|
|
|
}
|
2005-08-24 11:44:24 +00:00
|
|
|
return ret;
|
libs/gst/base/gstbasetransform.c: Cleanups, separate normal flow from errors, add sensible
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
2006-03-08 10:17:41 +00:00
|
|
|
|
|
|
|
/* ERRORS */
|
|
|
|
no_in_size:
|
|
|
|
{
|
|
|
|
GST_DEBUG_OBJECT (trans, "could not get in_size");
|
|
|
|
g_warning ("could not get in_size");
|
|
|
|
return FALSE;
|
|
|
|
}
|
|
|
|
no_multiple:
|
|
|
|
{
|
|
|
|
GST_DEBUG_OBJECT (trans, "Size %u is not a multiple of unit size %u", size,
|
|
|
|
inunitsize);
|
|
|
|
g_warning ("Size %u is not a multiple of unit size %u", size, inunitsize);
|
|
|
|
return FALSE;
|
|
|
|
}
|
|
|
|
no_out_size:
|
|
|
|
{
|
|
|
|
GST_DEBUG_OBJECT (trans, "could not get out_size");
|
|
|
|
g_warning ("could not get out_size");
|
|
|
|
return FALSE;
|
|
|
|
}
|
2005-08-24 11:44:24 +00:00
|
|
|
}
|
|
|
|
|
tests/network-clock.scm: Commentary update.
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
2005-07-01 16:46:59 +00:00
|
|
|
static GstCaps *
|
|
|
|
gst_base_transform_getcaps (GstPad * pad)
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
{
|
2005-05-06 17:10:49 +00:00
|
|
|
GstBaseTransform *trans;
|
tests/network-clock.scm: Commentary update.
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
2005-07-01 16:46:59 +00:00
|
|
|
GstPad *otherpad;
|
2005-05-06 17:10:49 +00:00
|
|
|
GstCaps *caps;
|
|
|
|
|
docs/design/: Some more docs in the works.
Original commit message from CVS:
* docs/design/part-dynamic.txt:
* docs/design/part-events.txt:
* docs/design/part-seeking.txt:
Some more docs in the works.
* gst/base/gstbasetransform.c: (gst_base_transform_transform_caps),
(gst_base_transform_getcaps), (gst_base_transform_configure_caps),
(gst_base_transform_setcaps), (gst_base_transform_get_size),
(gst_base_transform_buffer_alloc), (gst_base_transform_event),
(gst_base_transform_handle_buffer),
(gst_base_transform_sink_activate_push),
(gst_base_transform_src_activate_pull),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
Refcounting fixes.
* gst/gstbus.c: (gst_bus_source_dispatch), (gst_bus_poll):
Cleanups.
* gst/gstevent.c: (gst_event_finalize):
Set SRC to NULL.
* gst/gstutils.c: (gst_element_unlink),
(gst_pad_get_parent_element), (gst_pad_proxy_getcaps),
(gst_pad_proxy_setcaps):
* gst/gstutils.h:
Add _get_parent_element() to get a pads parent as an element.
2005-07-18 08:28:48 +00:00
|
|
|
trans = GST_BASE_TRANSFORM (gst_pad_get_parent (pad));
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
|
tests/network-clock.scm: Commentary update.
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
2005-07-01 16:46:59 +00:00
|
|
|
otherpad = (pad == trans->srcpad) ? trans->sinkpad : trans->srcpad;
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
|
tests/network-clock.scm: Commentary update.
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
2005-07-01 16:46:59 +00:00
|
|
|
/* we can do what the peer can */
|
2005-05-06 17:10:49 +00:00
|
|
|
caps = gst_pad_peer_get_caps (otherpad);
|
tests/network-clock.scm: Commentary update.
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
2005-07-01 16:46:59 +00:00
|
|
|
if (caps) {
|
|
|
|
GstCaps *temp;
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
const GstCaps *templ;
|
|
|
|
|
2005-08-04 19:40:43 +00:00
|
|
|
GST_DEBUG_OBJECT (pad, "peer caps %" GST_PTR_FORMAT, caps);
|
2005-05-09 21:37:54 +00:00
|
|
|
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
/* filtered against our padtemplate */
|
|
|
|
templ = gst_pad_get_pad_template_caps (otherpad);
|
2005-08-04 19:40:43 +00:00
|
|
|
GST_DEBUG_OBJECT (pad, "our template %" GST_PTR_FORMAT, templ);
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
temp = gst_caps_intersect (caps, templ);
|
2005-08-04 19:40:43 +00:00
|
|
|
GST_DEBUG_OBJECT (pad, "intersected %" GST_PTR_FORMAT, temp);
|
2005-05-09 21:37:54 +00:00
|
|
|
gst_caps_unref (caps);
|
2005-12-06 23:32:01 +00:00
|
|
|
/* then see what we can transform this to */
|
2005-08-24 13:33:21 +00:00
|
|
|
caps = gst_base_transform_transform_caps (trans,
|
|
|
|
GST_PAD_DIRECTION (otherpad), temp);
|
2005-08-04 19:40:43 +00:00
|
|
|
GST_DEBUG_OBJECT (pad, "transformed %" GST_PTR_FORMAT, caps);
|
tests/network-clock.scm: Commentary update.
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
2005-07-01 16:46:59 +00:00
|
|
|
gst_caps_unref (temp);
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
if (caps == NULL)
|
|
|
|
goto done;
|
|
|
|
|
|
|
|
/* and filter against the template again */
|
|
|
|
templ = gst_pad_get_pad_template_caps (pad);
|
2005-08-04 19:40:43 +00:00
|
|
|
GST_DEBUG_OBJECT (pad, "our template %" GST_PTR_FORMAT, templ);
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
temp = gst_caps_intersect (caps, templ);
|
2005-08-04 19:40:43 +00:00
|
|
|
GST_DEBUG_OBJECT (pad, "intersected %" GST_PTR_FORMAT, temp);
|
2005-07-05 08:47:40 +00:00
|
|
|
gst_caps_unref (caps);
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
/* this is what we can do */
|
2005-07-05 08:47:40 +00:00
|
|
|
caps = temp;
|
tests/network-clock.scm: Commentary update.
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
2005-07-01 16:46:59 +00:00
|
|
|
} else {
|
|
|
|
/* no peer, our padtemplate is enough then */
|
|
|
|
caps = gst_caps_copy (gst_pad_get_pad_template_caps (pad));
|
2005-05-06 17:10:49 +00:00
|
|
|
}
|
tests/network-clock.scm: Commentary update.
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
2005-07-01 16:46:59 +00:00
|
|
|
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
done:
|
2005-07-27 15:05:45 +00:00
|
|
|
GST_DEBUG_OBJECT (trans, "returning %" GST_PTR_FORMAT, caps);
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
|
docs/design/: Some more docs in the works.
Original commit message from CVS:
* docs/design/part-dynamic.txt:
* docs/design/part-events.txt:
* docs/design/part-seeking.txt:
Some more docs in the works.
* gst/base/gstbasetransform.c: (gst_base_transform_transform_caps),
(gst_base_transform_getcaps), (gst_base_transform_configure_caps),
(gst_base_transform_setcaps), (gst_base_transform_get_size),
(gst_base_transform_buffer_alloc), (gst_base_transform_event),
(gst_base_transform_handle_buffer),
(gst_base_transform_sink_activate_push),
(gst_base_transform_src_activate_pull),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
Refcounting fixes.
* gst/gstbus.c: (gst_bus_source_dispatch), (gst_bus_poll):
Cleanups.
* gst/gstevent.c: (gst_event_finalize):
Set SRC to NULL.
* gst/gstutils.c: (gst_element_unlink),
(gst_pad_get_parent_element), (gst_pad_proxy_getcaps),
(gst_pad_proxy_setcaps):
* gst/gstutils.h:
Add _get_parent_element() to get a pads parent as an element.
2005-07-18 08:28:48 +00:00
|
|
|
gst_object_unref (trans);
|
|
|
|
|
tests/network-clock.scm: Commentary update.
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
2005-07-01 16:46:59 +00:00
|
|
|
return caps;
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
}
|
|
|
|
|
libs/gst/base/gstbasetransform.c: Cleanups, separate normal flow from errors, add sensible
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
2006-03-08 10:17:41 +00:00
|
|
|
/* function triggered when the in and out caps are negotiated and need
|
|
|
|
* to be configured in the subclass. */
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
static gboolean
|
|
|
|
gst_base_transform_configure_caps (GstBaseTransform * trans, GstCaps * in,
|
|
|
|
GstCaps * out)
|
|
|
|
{
|
|
|
|
gboolean ret = TRUE;
|
|
|
|
GstBaseTransformClass *klass;
|
|
|
|
|
|
|
|
klass = GST_BASE_TRANSFORM_GET_CLASS (trans);
|
|
|
|
|
2005-08-25 19:36:05 +00:00
|
|
|
/* clear the cache */
|
|
|
|
gst_caps_replace (&trans->cache_caps1, NULL);
|
|
|
|
gst_caps_replace (&trans->cache_caps2, NULL);
|
|
|
|
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
/* If we've a transform_ip method and same input/output caps, set in_place
|
|
|
|
* by default. If for some reason the sub-class prefers using a transform
|
|
|
|
* function, it can clear the in place flag in the set_caps */
|
|
|
|
gst_base_transform_set_in_place (trans,
|
|
|
|
klass->transform_ip && trans->have_same_caps);
|
|
|
|
|
|
|
|
/* Set the passthrough if the class wants passthrough_on_same_caps
|
|
|
|
* and we have the same caps on each pad */
|
|
|
|
if (klass->passthrough_on_same_caps)
|
|
|
|
gst_base_transform_set_passthrough (trans, trans->have_same_caps);
|
|
|
|
|
2005-08-24 11:44:24 +00:00
|
|
|
/* now configure the element with the caps */
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
if (klass->set_caps) {
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
GST_DEBUG_OBJECT (trans, "Calling set_caps method to setup caps");
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
ret = klass->set_caps (trans, in, out);
|
|
|
|
}
|
|
|
|
|
2005-08-31 13:41:19 +00:00
|
|
|
trans->negotiated = ret;
|
|
|
|
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
libs/gst/base/gstbasetransform.c: Cleanups, separate normal flow from errors, add sensible
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
2006-03-08 10:17:41 +00:00
|
|
|
/* called when new caps arrive on the sink or source pad */
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
static gboolean
|
|
|
|
gst_base_transform_setcaps (GstPad * pad, GstCaps * caps)
|
|
|
|
{
|
|
|
|
GstBaseTransform *trans;
|
tests/network-clock.scm: Commentary update.
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
2005-07-01 16:46:59 +00:00
|
|
|
GstBaseTransformClass *klass;
|
|
|
|
GstPad *otherpad, *otherpeer;
|
2005-07-05 08:47:40 +00:00
|
|
|
GstCaps *othercaps = NULL;
|
2005-07-05 09:35:22 +00:00
|
|
|
gboolean ret = TRUE;
|
2005-08-24 11:44:24 +00:00
|
|
|
gboolean peer_checked = FALSE;
|
|
|
|
|
docs/design/: Some more docs in the works.
Original commit message from CVS:
* docs/design/part-dynamic.txt:
* docs/design/part-events.txt:
* docs/design/part-seeking.txt:
Some more docs in the works.
* gst/base/gstbasetransform.c: (gst_base_transform_transform_caps),
(gst_base_transform_getcaps), (gst_base_transform_configure_caps),
(gst_base_transform_setcaps), (gst_base_transform_get_size),
(gst_base_transform_buffer_alloc), (gst_base_transform_event),
(gst_base_transform_handle_buffer),
(gst_base_transform_sink_activate_push),
(gst_base_transform_src_activate_pull),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
Refcounting fixes.
* gst/gstbus.c: (gst_bus_source_dispatch), (gst_bus_poll):
Cleanups.
* gst/gstevent.c: (gst_event_finalize):
Set SRC to NULL.
* gst/gstutils.c: (gst_element_unlink),
(gst_pad_get_parent_element), (gst_pad_proxy_getcaps),
(gst_pad_proxy_setcaps):
* gst/gstutils.h:
Add _get_parent_element() to get a pads parent as an element.
2005-07-18 08:28:48 +00:00
|
|
|
trans = GST_BASE_TRANSFORM (gst_pad_get_parent (pad));
|
tests/network-clock.scm: Commentary update.
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
2005-07-01 16:46:59 +00:00
|
|
|
klass = GST_BASE_TRANSFORM_GET_CLASS (trans);
|
|
|
|
|
|
|
|
otherpad = (pad == trans->srcpad) ? trans->sinkpad : trans->srcpad;
|
|
|
|
otherpeer = gst_pad_get_peer (otherpad);
|
|
|
|
|
2005-08-24 11:44:24 +00:00
|
|
|
/* if we get called recursively, we bail out now to avoid an
|
|
|
|
* infinite loop. */
|
|
|
|
if (GST_PAD_IS_IN_SETCAPS (otherpad))
|
tests/network-clock.scm: Commentary update.
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
2005-07-01 16:46:59 +00:00
|
|
|
goto done;
|
|
|
|
|
2005-08-31 13:41:19 +00:00
|
|
|
/* caps must be fixed here */
|
|
|
|
if (!gst_caps_is_fixed (caps))
|
|
|
|
goto unfixed_caps;
|
|
|
|
|
2005-08-24 11:44:24 +00:00
|
|
|
/* see how we can transform the input caps. */
|
2005-08-24 13:33:21 +00:00
|
|
|
othercaps = gst_base_transform_transform_caps (trans,
|
|
|
|
GST_PAD_DIRECTION (pad), caps);
|
2005-07-28 11:49:56 +00:00
|
|
|
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
/* The caps we can actually output is the intersection of the transformed
|
|
|
|
* caps with the pad template for the pad */
|
|
|
|
if (othercaps) {
|
|
|
|
GstCaps *intersect;
|
|
|
|
const GstCaps *templ_caps;
|
|
|
|
|
|
|
|
templ_caps = gst_pad_get_pad_template_caps (otherpad);
|
|
|
|
intersect = gst_caps_intersect (othercaps, templ_caps);
|
|
|
|
|
|
|
|
gst_caps_unref (othercaps);
|
|
|
|
othercaps = intersect;
|
|
|
|
}
|
|
|
|
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
/* check if transform is empty */
|
|
|
|
if (!othercaps || gst_caps_is_empty (othercaps))
|
|
|
|
goto no_transform;
|
tests/network-clock.scm: Commentary update.
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
2005-07-01 16:46:59 +00:00
|
|
|
|
2005-08-24 11:44:24 +00:00
|
|
|
/* if the othercaps are not fixed, we need to fixate them, first attempt
|
|
|
|
* is by attempting passthrough if the othercaps are a superset of caps. */
|
2005-07-05 08:47:40 +00:00
|
|
|
if (!gst_caps_is_fixed (othercaps)) {
|
|
|
|
GstCaps *temp;
|
tests/network-clock.scm: Commentary update.
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
2005-07-01 16:46:59 +00:00
|
|
|
|
2005-07-27 15:05:45 +00:00
|
|
|
GST_DEBUG_OBJECT (trans,
|
|
|
|
"transform returned non fixed %" GST_PTR_FORMAT, othercaps);
|
2005-07-12 17:17:34 +00:00
|
|
|
|
2005-08-24 11:44:24 +00:00
|
|
|
/* see if the target caps are a superset of the source caps, in this
|
|
|
|
* case we can try to perform passthrough */
|
2005-07-05 08:47:40 +00:00
|
|
|
temp = gst_caps_intersect (othercaps, caps);
|
2005-07-27 15:05:45 +00:00
|
|
|
GST_DEBUG_OBJECT (trans, "intersect returned %" GST_PTR_FORMAT, temp);
|
2005-07-05 08:47:40 +00:00
|
|
|
if (temp) {
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
if (!gst_caps_is_empty (temp) && otherpeer) {
|
2005-07-27 15:05:45 +00:00
|
|
|
GST_DEBUG_OBJECT (trans, "try passthrough with %" GST_PTR_FORMAT, caps);
|
2005-07-12 17:17:34 +00:00
|
|
|
/* try passthrough. we know it's fixed, because caps is fixed */
|
|
|
|
if (gst_pad_accept_caps (otherpeer, caps)) {
|
2005-07-27 15:05:45 +00:00
|
|
|
GST_DEBUG_OBJECT (trans, "peer accepted %" GST_PTR_FORMAT, caps);
|
2005-08-24 11:44:24 +00:00
|
|
|
/* peer accepted unmodified caps, we free the original non-fixed
|
|
|
|
* caps and work with the passthrough caps */
|
2005-07-12 17:17:34 +00:00
|
|
|
gst_caps_unref (othercaps);
|
|
|
|
othercaps = gst_caps_ref (caps);
|
2005-08-24 11:44:24 +00:00
|
|
|
/* mark that we checked othercaps with the peer, this
|
|
|
|
* makes sure we don't call accept_caps again with these same
|
|
|
|
* caps */
|
|
|
|
peer_checked = TRUE;
|
2005-07-12 17:17:34 +00:00
|
|
|
} else {
|
2005-07-27 15:05:45 +00:00
|
|
|
GST_DEBUG_OBJECT (trans,
|
|
|
|
"peer did not accept %" GST_PTR_FORMAT, caps);
|
2005-07-12 17:17:34 +00:00
|
|
|
}
|
2005-07-05 08:47:40 +00:00
|
|
|
}
|
|
|
|
gst_caps_unref (temp);
|
|
|
|
}
|
|
|
|
}
|
tests/network-clock.scm: Commentary update.
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
2005-07-01 16:46:59 +00:00
|
|
|
|
2005-08-24 11:44:24 +00:00
|
|
|
/* second attempt at fixation is done by intersecting with
|
|
|
|
* the peer caps */
|
2005-07-05 08:47:40 +00:00
|
|
|
if (!gst_caps_is_fixed (othercaps) && otherpeer) {
|
|
|
|
/* intersect against what the peer can do */
|
2005-07-12 17:17:34 +00:00
|
|
|
GstCaps *peercaps;
|
|
|
|
GstCaps *intersect;
|
tests/network-clock.scm: Commentary update.
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
2005-07-01 16:46:59 +00:00
|
|
|
|
2005-07-27 15:05:45 +00:00
|
|
|
GST_DEBUG_OBJECT (trans, "othercaps now %" GST_PTR_FORMAT, othercaps);
|
tests/network-clock.scm: Commentary update.
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
2005-07-01 16:46:59 +00:00
|
|
|
|
2005-07-12 17:17:34 +00:00
|
|
|
peercaps = gst_pad_get_caps (otherpeer);
|
|
|
|
intersect = gst_caps_intersect (peercaps, othercaps);
|
|
|
|
gst_caps_unref (peercaps);
|
|
|
|
gst_caps_unref (othercaps);
|
|
|
|
othercaps = intersect;
|
2005-08-24 11:44:24 +00:00
|
|
|
peer_checked = FALSE;
|
2005-07-12 17:17:34 +00:00
|
|
|
|
2005-07-27 15:05:45 +00:00
|
|
|
GST_DEBUG_OBJECT (trans,
|
|
|
|
"filtering against peer yields %" GST_PTR_FORMAT, othercaps);
|
2005-07-05 08:47:40 +00:00
|
|
|
}
|
tests/network-clock.scm: Commentary update.
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
2005-07-01 16:46:59 +00:00
|
|
|
|
2005-07-28 10:38:02 +00:00
|
|
|
if (gst_caps_is_empty (othercaps))
|
|
|
|
goto no_transform_possible;
|
|
|
|
|
2005-08-24 11:44:24 +00:00
|
|
|
/* third attempt at fixation, call the fixate vmethod and
|
|
|
|
* ultimately call the pad fixate function. */
|
2005-07-05 08:47:40 +00:00
|
|
|
if (!gst_caps_is_fixed (othercaps)) {
|
|
|
|
GstCaps *temp;
|
tests/network-clock.scm: Commentary update.
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
2005-07-01 16:46:59 +00:00
|
|
|
|
2005-07-27 15:05:45 +00:00
|
|
|
GST_DEBUG_OBJECT (trans,
|
2005-08-24 11:44:24 +00:00
|
|
|
"trying to fixate %" GST_PTR_FORMAT " on pad %s:%s",
|
|
|
|
othercaps, GST_DEBUG_PAD_NAME (otherpad));
|
2005-07-12 17:17:34 +00:00
|
|
|
|
2005-08-24 11:44:24 +00:00
|
|
|
/* since we have no other way to fixate left, we might as well just take
|
|
|
|
* the first of the caps list and fixate that */
|
|
|
|
|
|
|
|
/* FIXME: when fixating using the vmethod, it might make sense to fixate
|
|
|
|
* each of the caps; but Wim doesn't see a use case for that yet */
|
2005-07-05 08:47:40 +00:00
|
|
|
temp = gst_caps_copy_nth (othercaps, 0);
|
|
|
|
gst_caps_unref (othercaps);
|
|
|
|
othercaps = temp;
|
2005-08-24 11:44:24 +00:00
|
|
|
peer_checked = FALSE;
|
|
|
|
|
|
|
|
if (klass->fixate_caps) {
|
|
|
|
GST_DEBUG_OBJECT (trans, "trying to fixate %" GST_PTR_FORMAT
|
|
|
|
" using caps %" GST_PTR_FORMAT
|
|
|
|
" on pad %s:%s using fixate_caps vmethod", othercaps, caps,
|
|
|
|
GST_DEBUG_PAD_NAME (otherpad));
|
|
|
|
klass->fixate_caps (trans, GST_PAD_DIRECTION (pad), caps, othercaps);
|
|
|
|
}
|
|
|
|
/* if still not fixed, no other option but to let the default pad fixate
|
|
|
|
* function do its job */
|
|
|
|
if (!gst_caps_is_fixed (othercaps)) {
|
|
|
|
GST_DEBUG_OBJECT (trans, "trying to fixate %" GST_PTR_FORMAT
|
|
|
|
" on pad %s:%s using gst_pad_fixate_caps", othercaps,
|
|
|
|
GST_DEBUG_PAD_NAME (otherpad));
|
|
|
|
gst_pad_fixate_caps (otherpad, othercaps);
|
|
|
|
}
|
2005-07-27 15:05:45 +00:00
|
|
|
GST_DEBUG_OBJECT (trans, "after fixating %" GST_PTR_FORMAT, othercaps);
|
2005-07-05 08:47:40 +00:00
|
|
|
}
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
|
2005-08-24 11:44:24 +00:00
|
|
|
/* caps should be fixed now, if not we have to fail. */
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
if (!gst_caps_is_fixed (othercaps))
|
|
|
|
goto could_not_fixate;
|
tests/network-clock.scm: Commentary update.
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
2005-07-01 16:46:59 +00:00
|
|
|
|
2005-08-24 13:33:21 +00:00
|
|
|
/* and peer should accept, don't check again if we already checked the
|
2005-08-24 11:44:24 +00:00
|
|
|
* othercaps against the peer. */
|
|
|
|
if (!peer_checked && otherpeer && !gst_pad_accept_caps (otherpeer, othercaps))
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
goto peer_no_accept;
|
tests/network-clock.scm: Commentary update.
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
2005-07-01 16:46:59 +00:00
|
|
|
|
2005-07-27 15:05:45 +00:00
|
|
|
GST_DEBUG_OBJECT (trans, "got final caps %" GST_PTR_FORMAT, othercaps);
|
2005-07-12 17:17:34 +00:00
|
|
|
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
trans->have_same_caps = gst_caps_is_equal (caps, othercaps);
|
|
|
|
GST_DEBUG_OBJECT (trans, "have_same_caps: %d", trans->have_same_caps);
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
|
|
|
|
/* see if we have to configure the element now */
|
2005-08-04 19:40:43 +00:00
|
|
|
if (!trans->delay_configure) {
|
2005-08-24 11:44:24 +00:00
|
|
|
GstCaps *incaps, *outcaps;
|
|
|
|
|
|
|
|
/* make sure in and out caps are correct */
|
|
|
|
if (pad == trans->sinkpad) {
|
|
|
|
incaps = caps;
|
|
|
|
outcaps = othercaps;
|
|
|
|
} else {
|
|
|
|
incaps = othercaps;
|
|
|
|
outcaps = caps;
|
|
|
|
}
|
|
|
|
/* call configure now */
|
|
|
|
if (!(ret = gst_base_transform_configure_caps (trans, incaps, outcaps)))
|
|
|
|
goto failed_configure;
|
|
|
|
} else {
|
|
|
|
/* set pending configure, the configure will happen later with the
|
|
|
|
* caps we set on the pads above. */
|
|
|
|
trans->pending_configure = TRUE;
|
2005-08-04 19:40:43 +00:00
|
|
|
}
|
tests/network-clock.scm: Commentary update.
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
2005-07-01 16:46:59 +00:00
|
|
|
|
2005-08-24 11:44:24 +00:00
|
|
|
/* we know this will work, we implement the setcaps */
|
|
|
|
gst_pad_set_caps (otherpad, othercaps);
|
|
|
|
|
tests/network-clock.scm: Commentary update.
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
2005-07-01 16:46:59 +00:00
|
|
|
done:
|
|
|
|
if (otherpeer)
|
|
|
|
gst_object_unref (otherpeer);
|
2005-07-05 08:47:40 +00:00
|
|
|
if (othercaps)
|
|
|
|
gst_caps_unref (othercaps);
|
|
|
|
|
2005-08-31 13:41:19 +00:00
|
|
|
trans->negotiated = ret;
|
|
|
|
|
docs/design/: Some more docs in the works.
Original commit message from CVS:
* docs/design/part-dynamic.txt:
* docs/design/part-events.txt:
* docs/design/part-seeking.txt:
Some more docs in the works.
* gst/base/gstbasetransform.c: (gst_base_transform_transform_caps),
(gst_base_transform_getcaps), (gst_base_transform_configure_caps),
(gst_base_transform_setcaps), (gst_base_transform_get_size),
(gst_base_transform_buffer_alloc), (gst_base_transform_event),
(gst_base_transform_handle_buffer),
(gst_base_transform_sink_activate_push),
(gst_base_transform_src_activate_pull),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
Refcounting fixes.
* gst/gstbus.c: (gst_bus_source_dispatch), (gst_bus_poll):
Cleanups.
* gst/gstevent.c: (gst_event_finalize):
Set SRC to NULL.
* gst/gstutils.c: (gst_element_unlink),
(gst_pad_get_parent_element), (gst_pad_proxy_getcaps),
(gst_pad_proxy_setcaps):
* gst/gstutils.h:
Add _get_parent_element() to get a pads parent as an element.
2005-07-18 08:28:48 +00:00
|
|
|
gst_object_unref (trans);
|
|
|
|
|
tests/network-clock.scm: Commentary update.
Original commit message from CVS:
2005-07-01 Andy Wingo <wingo@pobox.com>
* tests/network-clock.scm: Commentary update.
* gst/elements/gstidentity.c (PROP_DUPLICATE): Gone daddy gone.
Didn't really make sense, not implementable with basetransform,
etc.
(gst_identity_transform): Unref inbuf via make_writable. Feeble
attempt at implementing the sync property, needs an unlock method.
* gst/base/gstbasetransform.c (gst_base_transform_transform_caps):
New func, by default returns the same caps (the identity
transformation).
(gst_base_transform_getcaps): Uses transform_caps to return
something sensible.
(gst_base_transform_setcaps): Complicated logic to get caps on
both pads, even if they are different, and to call set_caps once
for every time both pads get their caps set.
(gst_base_transform_handle_buffer): Give the ref to the transform
function. Allows in-place modification of the buffer.
* gst/base/gstbasetransform.h (transform_caps): New class method.
Given caps on one side, what can I do on the other.
(set_caps): Take two caps, one for each side of the element.
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_fixate_caps): Change prototype to modify
caps in place. This is safe because we can check the mutability of
the caps, and a good idea because fixate functions are just called
as a matter of last resort. (Not actually implemented.)
(gst_pad_set_caps): If the caps we're setting is actually the same
as the existing pad caps, just update the pointer without calling
setcaps. Assert that caps is either NULL or fixed, as per the
docs.
* gst/gstghostpad.c: Update for fixate changes.
2005-07-01 16:46:59 +00:00
|
|
|
return ret;
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
|
|
|
|
/* ERRORS */
|
2005-08-31 13:41:19 +00:00
|
|
|
unfixed_caps:
|
|
|
|
{
|
|
|
|
GST_DEBUG_OBJECT (trans, "caps are not fixed %" GST_PTR_FORMAT, caps);
|
|
|
|
ret = FALSE;
|
|
|
|
goto done;
|
|
|
|
}
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
no_transform:
|
|
|
|
{
|
2005-07-27 15:05:45 +00:00
|
|
|
GST_DEBUG_OBJECT (trans,
|
|
|
|
"transform returned useless %" GST_PTR_FORMAT, othercaps);
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
ret = FALSE;
|
|
|
|
goto done;
|
|
|
|
}
|
2005-07-28 10:38:02 +00:00
|
|
|
no_transform_possible:
|
|
|
|
{
|
|
|
|
GST_DEBUG_OBJECT (trans,
|
|
|
|
"transform could not transform %" GST_PTR_FORMAT
|
|
|
|
" in anything we support", caps);
|
|
|
|
ret = FALSE;
|
|
|
|
goto done;
|
|
|
|
}
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
could_not_fixate:
|
|
|
|
{
|
2005-08-04 19:40:43 +00:00
|
|
|
GST_ERROR_OBJECT (trans, "FAILED to fixate %" GST_PTR_FORMAT, othercaps);
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
ret = FALSE;
|
|
|
|
goto done;
|
|
|
|
}
|
|
|
|
peer_no_accept:
|
|
|
|
{
|
2005-07-27 15:05:45 +00:00
|
|
|
GST_DEBUG_OBJECT (trans, "FAILED to get peer of %" GST_PTR_FORMAT
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
" to accept %" GST_PTR_FORMAT, otherpad, othercaps);
|
|
|
|
ret = FALSE;
|
|
|
|
goto done;
|
|
|
|
}
|
2005-08-24 11:44:24 +00:00
|
|
|
failed_configure:
|
|
|
|
{
|
|
|
|
GST_DEBUG_OBJECT (trans, "FAILED to configure caps %" GST_PTR_FORMAT
|
|
|
|
" to accept %" GST_PTR_FORMAT, otherpad, othercaps);
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
ret = FALSE;
|
2005-08-24 11:44:24 +00:00
|
|
|
goto done;
|
|
|
|
}
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
}
|
|
|
|
|
libs/gst/base/gstbasetransform.c: Cleanups, separate normal flow from errors, add sensible
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
2006-03-08 10:17:41 +00:00
|
|
|
/* Allocate a buffer using gst_pad_alloc_buffer
|
2005-11-11 16:37:11 +00:00
|
|
|
*
|
libs/gst/base/gstbasetransform.c: Cleanups, separate normal flow from errors, add sensible
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
2006-03-08 10:17:41 +00:00
|
|
|
* This function does not do renegotiation on the source pad
|
2005-11-11 16:37:11 +00:00
|
|
|
*/
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
static GstFlowReturn
|
libs/gst/base/gstbasetransform.c: Cleanups, separate normal flow from errors, add sensible
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
2006-03-08 10:17:41 +00:00
|
|
|
gst_base_transform_prepare_output_buffer (GstBaseTransform * trans,
|
2005-11-11 16:37:11 +00:00
|
|
|
GstBuffer * in_buf, gint out_size, GstCaps * out_caps, GstBuffer ** out_buf)
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
{
|
|
|
|
GstBaseTransformClass *bclass;
|
|
|
|
GstFlowReturn ret = GST_FLOW_OK;
|
|
|
|
gboolean copy_inbuf = FALSE;
|
|
|
|
|
|
|
|
bclass = GST_BASE_TRANSFORM_GET_CLASS (trans);
|
|
|
|
|
2005-11-11 16:37:11 +00:00
|
|
|
/* we cannot reconfigure the element yet as we are still processing
|
|
|
|
* the old buffer. We will therefore delay the reconfiguration of the
|
|
|
|
* element until we have processed this last buffer. */
|
|
|
|
trans->delay_configure = TRUE;
|
2005-11-14 10:49:35 +00:00
|
|
|
/* out_caps is the caps of the src pad gathered through the GST_PAD_CAPS
|
|
|
|
macro. If a set_caps occurs during this function this caps will become
|
|
|
|
invalid. We want to keep them during preparation of the output buffer. */
|
2005-11-16 14:27:20 +00:00
|
|
|
if (out_caps)
|
|
|
|
gst_caps_ref (out_caps);
|
2005-11-11 16:37:11 +00:00
|
|
|
|
|
|
|
/* see if the subclass wants to alloc a buffer */
|
2005-09-12 13:45:04 +00:00
|
|
|
if (bclass->prepare_output_buffer) {
|
2005-11-11 16:37:11 +00:00
|
|
|
ret =
|
|
|
|
bclass->prepare_output_buffer (trans, in_buf, out_size, out_caps,
|
|
|
|
out_buf);
|
2005-09-12 13:45:04 +00:00
|
|
|
if (ret != GST_FLOW_OK)
|
2005-11-11 16:37:11 +00:00
|
|
|
goto done;
|
2005-09-12 13:45:04 +00:00
|
|
|
}
|
|
|
|
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
/* See if we want to prepare the buffer for in place output */
|
2005-11-11 16:37:11 +00:00
|
|
|
if (*out_buf == NULL && GST_BUFFER_SIZE (in_buf) == out_size
|
|
|
|
&& bclass->transform_ip) {
|
|
|
|
if (gst_buffer_is_writable (in_buf)) {
|
2005-09-12 13:45:04 +00:00
|
|
|
if (trans->have_same_caps) {
|
|
|
|
/* Input buffer is already writable and caps are the same, just ref and return it */
|
2005-11-11 16:37:11 +00:00
|
|
|
*out_buf = in_buf;
|
|
|
|
gst_buffer_ref (in_buf);
|
2005-09-12 13:45:04 +00:00
|
|
|
} else {
|
|
|
|
/* Writable buffer, but need to change caps => subbuffer */
|
2005-11-11 16:37:11 +00:00
|
|
|
*out_buf = gst_buffer_create_sub (in_buf, 0, GST_BUFFER_SIZE (in_buf));
|
|
|
|
gst_caps_replace (&GST_BUFFER_CAPS (*out_buf), out_caps);
|
2005-09-12 13:45:04 +00:00
|
|
|
}
|
2005-11-11 16:37:11 +00:00
|
|
|
goto done;
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
} else {
|
|
|
|
/* Make a writable buffer below and copy the data */
|
|
|
|
copy_inbuf = TRUE;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2005-11-11 16:37:11 +00:00
|
|
|
if (*out_buf == NULL) {
|
|
|
|
/* Sub-class didn't already provide a buffer for us. Make one */
|
libs/gst/base/gstbasetransform.c: Cleanups, separate normal flow from errors, add sensible
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
2006-03-08 10:17:41 +00:00
|
|
|
ret = gst_pad_alloc_buffer (trans->srcpad,
|
2005-12-05 13:01:35 +00:00
|
|
|
GST_BUFFER_OFFSET (in_buf), out_size, out_caps, out_buf);
|
2005-11-11 16:37:11 +00:00
|
|
|
if (ret != GST_FLOW_OK || *out_buf == NULL)
|
|
|
|
goto done;
|
|
|
|
|
|
|
|
/* allocated buffer could be of different caps than what we requested */
|
|
|
|
if (G_UNLIKELY (!gst_caps_is_equal (out_caps, GST_BUFFER_CAPS (*out_buf)))) {
|
|
|
|
/* FIXME, it is possible we can reconfigure the transform with new caps at this
|
|
|
|
* point but for now we just create a buffer ourselves */
|
More segment updates, replace code in plugins with segment helper functions.
Original commit message from CVS:
* check/gst/gstsegment.c: (GST_START_TEST):
* docs/design/part-TODO.txt:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_event), (gst_base_sink_do_sync),
(gst_base_sink_activate_pull), (gst_base_sink_get_position),
(gst_base_sink_query), (gst_base_sink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasesrc.c: (gst_base_src_init), (gst_base_src_query),
(gst_base_src_default_newsegment),
(gst_base_src_configure_segment), (gst_base_src_do_seek),
(gst_base_src_get_range), (gst_base_src_loop),
(gst_base_src_change_state):
* gst/base/gstbasesrc.h:
* gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf),
(gst_base_transform_event), (gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/base/gstcollectpads.c: (gst_collect_pads_add_pad),
(gst_collect_pads_event):
* gst/base/gstcollectpads.h:
* gst/elements/gstfakesrc.c: (gst_fake_src_init),
(gst_fake_src_create):
* gst/elements/gstfakesrc.h:
* gst/elements/gstidentity.c: (gst_identity_transform_ip):
* gst/gstsegment.c: (gst_segment_init), (gst_segment_set_duration),
(gst_segment_set_last_stop), (gst_segment_set_seek),
(gst_segment_set_newsegment), (gst_segment_to_stream_time),
(gst_segment_to_running_time), (gst_segment_clip):
* gst/gstsegment.h:
More segment updates, replace code in plugins with segment
helper functions.
2005-11-21 17:09:45 +00:00
|
|
|
gst_buffer_unref (*out_buf);
|
2005-11-11 16:37:11 +00:00
|
|
|
*out_buf = gst_buffer_new_and_alloc (out_size);
|
|
|
|
gst_buffer_set_caps (*out_buf, out_caps);
|
|
|
|
}
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
}
|
|
|
|
|
2005-10-15 15:30:24 +00:00
|
|
|
/* If the output buffer metadata is modifiable, copy timestamps and
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
* buffer flags */
|
libs/gst/base/gstbasetransform.c: Cleanups, separate normal flow from errors, add sensible
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
2006-03-08 10:17:41 +00:00
|
|
|
if (*out_buf != in_buf && gst_buffer_is_metadata_writable (*out_buf)) {
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
|
2005-11-11 16:37:11 +00:00
|
|
|
if (copy_inbuf && gst_buffer_is_writable (*out_buf))
|
|
|
|
memcpy (GST_BUFFER_DATA (*out_buf), GST_BUFFER_DATA (in_buf), out_size);
|
2005-09-09 23:45:15 +00:00
|
|
|
|
2005-11-11 16:37:11 +00:00
|
|
|
gst_buffer_stamp (*out_buf, in_buf);
|
|
|
|
GST_BUFFER_FLAGS (*out_buf) |= GST_BUFFER_FLAGS (in_buf) &
|
libs/gst/base/gstbasetransform.c: Cleanups, separate normal flow from errors, add sensible
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
2006-03-08 10:17:41 +00:00
|
|
|
(GST_BUFFER_FLAG_PREROLL | GST_BUFFER_FLAG_DISCONT |
|
|
|
|
GST_BUFFER_FLAG_IN_CAPS | GST_BUFFER_FLAG_DELTA_UNIT);
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
}
|
|
|
|
|
2005-11-11 16:37:11 +00:00
|
|
|
done:
|
2005-11-16 14:27:20 +00:00
|
|
|
if (out_caps)
|
|
|
|
gst_caps_unref (out_caps);
|
2005-11-11 16:37:11 +00:00
|
|
|
trans->delay_configure = FALSE;
|
|
|
|
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
libs/gst/base/gstbasetransform.c: Cleanups, separate normal flow from errors, add sensible
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
2006-03-08 10:17:41 +00:00
|
|
|
/* Given @caps calcultate the size of one unit.
|
|
|
|
*
|
|
|
|
* For video caps, this is the size of one frame (and thus one buffer).
|
|
|
|
* For audio caps, this is the size of one sample.
|
|
|
|
*
|
|
|
|
* These values are cached since they do not change and the calculation
|
|
|
|
* potentially involves parsing caps and other expensive stuff.
|
|
|
|
*
|
|
|
|
* We have two cache locations to store the size, one for the source caps
|
|
|
|
* and one for the sink caps.
|
|
|
|
*
|
|
|
|
* this function returns FALSE if no size could be calculated.
|
|
|
|
*/
|
2005-08-24 13:33:21 +00:00
|
|
|
static gboolean
|
|
|
|
gst_base_transform_get_unit_size (GstBaseTransform * trans, GstCaps * caps,
|
|
|
|
guint * size)
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
{
|
2005-08-24 13:33:21 +00:00
|
|
|
gboolean res = FALSE;
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
GstBaseTransformClass *bclass;
|
|
|
|
|
2005-08-25 19:36:05 +00:00
|
|
|
/* see if we have the result cached */
|
|
|
|
if (trans->cache_caps1 == caps) {
|
|
|
|
*size = trans->cache_caps1_size;
|
libs/gst/base/gstbasetransform.c: Cleanups, separate normal flow from errors, add sensible
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
2006-03-08 10:17:41 +00:00
|
|
|
GST_DEBUG_OBJECT (trans, "returned %d from first cache", *size);
|
2005-08-25 19:36:05 +00:00
|
|
|
return TRUE;
|
|
|
|
}
|
|
|
|
if (trans->cache_caps2 == caps) {
|
|
|
|
*size = trans->cache_caps2_size;
|
libs/gst/base/gstbasetransform.c: Cleanups, separate normal flow from errors, add sensible
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
2006-03-08 10:17:41 +00:00
|
|
|
GST_DEBUG_OBJECT (trans, "returned %d from second cached", *size);
|
2005-08-25 19:36:05 +00:00
|
|
|
return TRUE;
|
|
|
|
}
|
2005-08-24 13:33:21 +00:00
|
|
|
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
bclass = GST_BASE_TRANSFORM_GET_CLASS (trans);
|
2005-08-24 13:33:21 +00:00
|
|
|
if (bclass->get_unit_size) {
|
|
|
|
res = bclass->get_unit_size (trans, caps, size);
|
2005-08-26 11:19:22 +00:00
|
|
|
GST_DEBUG_OBJECT (trans, "caps %" GST_PTR_FORMAT
|
|
|
|
") has unit size %d, result %s", caps, *size, res ? "TRUE" : "FALSE");
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
|
2005-08-25 19:36:05 +00:00
|
|
|
if (res) {
|
libs/gst/base/gstbasetransform.c: Cleanups, separate normal flow from errors, add sensible
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
2006-03-08 10:17:41 +00:00
|
|
|
/* and cache the values */
|
2005-08-25 19:36:05 +00:00
|
|
|
if (trans->cache_caps1 == NULL) {
|
|
|
|
gst_caps_replace (&trans->cache_caps1, caps);
|
|
|
|
trans->cache_caps1_size = *size;
|
libs/gst/base/gstbasetransform.c: Cleanups, separate normal flow from errors, add sensible
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
2006-03-08 10:17:41 +00:00
|
|
|
GST_DEBUG_OBJECT (trans, "caching %d in first cache", *size);
|
2005-08-25 19:36:05 +00:00
|
|
|
} else if (trans->cache_caps2 == NULL) {
|
|
|
|
gst_caps_replace (&trans->cache_caps2, caps);
|
|
|
|
trans->cache_caps2_size = *size;
|
libs/gst/base/gstbasetransform.c: Cleanups, separate normal flow from errors, add sensible
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
2006-03-08 10:17:41 +00:00
|
|
|
GST_DEBUG_OBJECT (trans, "caching %d in second cache", *size);
|
|
|
|
} else {
|
|
|
|
GST_DEBUG_OBJECT (trans, "no free spot to cache unit_size");
|
2005-08-25 19:36:05 +00:00
|
|
|
}
|
|
|
|
}
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
} else {
|
libs/gst/base/gstbasetransform.c: Cleanups, separate normal flow from errors, add sensible
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
2006-03-08 10:17:41 +00:00
|
|
|
GST_DEBUG_OBJECT (trans, "Sub-class does not implement get_unit_size");
|
2005-08-25 19:36:05 +00:00
|
|
|
}
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
return res;
|
|
|
|
}
|
|
|
|
|
2005-08-24 11:44:24 +00:00
|
|
|
/* your upstream peer wants to send you a buffer
|
|
|
|
* that buffer has the given offset, size and caps
|
|
|
|
* you're requested to allocate a buffer
|
|
|
|
*/
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
static GstFlowReturn
|
|
|
|
gst_base_transform_buffer_alloc (GstPad * pad, guint64 offset, guint size,
|
|
|
|
GstCaps * caps, GstBuffer ** buf)
|
|
|
|
{
|
|
|
|
GstBaseTransform *trans;
|
|
|
|
GstFlowReturn res;
|
2005-08-24 11:44:24 +00:00
|
|
|
guint new_size;
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
|
|
|
|
trans = GST_BASE_TRANSFORM (gst_pad_get_parent (pad));
|
|
|
|
|
2005-10-27 20:59:00 +00:00
|
|
|
/* we cannot run this when we are transforming data and as such doing
|
|
|
|
* another negotiation in the transform method. */
|
|
|
|
g_mutex_lock (trans->transform_lock);
|
2005-08-25 19:36:05 +00:00
|
|
|
|
2005-08-04 19:40:43 +00:00
|
|
|
*buf = NULL;
|
|
|
|
|
libs/gst/base/gstbasetransform.c: Cleanups, separate normal flow from errors, add sensible
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
2006-03-08 10:17:41 +00:00
|
|
|
GST_DEBUG_OBJECT (trans, "allocating a buffer of size %d ...", size);
|
2005-08-26 11:19:22 +00:00
|
|
|
if (offset == GST_BUFFER_OFFSET_NONE)
|
|
|
|
GST_DEBUG_OBJECT (trans, "... and offset NONE");
|
|
|
|
else
|
|
|
|
GST_DEBUG_OBJECT (trans, "... and offset %" G_GUINT64_FORMAT, offset);
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
|
|
|
|
/* before any buffers are pushed, have_same_caps is TRUE; allocating can trigger
|
2005-08-24 11:44:24 +00:00
|
|
|
* a renegotiation and change that to FALSE */
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
if (trans->have_same_caps) {
|
2005-08-04 19:40:43 +00:00
|
|
|
/* request a buffer with the same caps */
|
2005-08-24 11:44:24 +00:00
|
|
|
GST_DEBUG_OBJECT (trans, "requesting buffer with same caps, size %d", size);
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
|
2005-12-05 13:01:35 +00:00
|
|
|
res =
|
|
|
|
gst_pad_alloc_buffer_and_set_caps (trans->srcpad, offset, size, caps,
|
|
|
|
buf);
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
} else {
|
2005-08-04 19:40:43 +00:00
|
|
|
/* if we are configured, request a buffer with the src caps */
|
|
|
|
GstCaps *srccaps = gst_pad_get_negotiated_caps (trans->srcpad);
|
2005-11-29 15:12:22 +00:00
|
|
|
GstCaps *sinkcaps = gst_pad_get_negotiated_caps (trans->sinkpad);
|
2005-08-04 19:40:43 +00:00
|
|
|
|
|
|
|
if (!srccaps)
|
|
|
|
goto not_configured;
|
|
|
|
|
2005-11-29 15:12:22 +00:00
|
|
|
if (sinkcaps != NULL) {
|
|
|
|
if (sinkcaps != caps || !gst_caps_is_equal (sinkcaps, caps)) {
|
|
|
|
gst_caps_unref (sinkcaps);
|
|
|
|
gst_caps_unref (srccaps);
|
|
|
|
goto not_configured;
|
|
|
|
}
|
|
|
|
gst_caps_unref (sinkcaps);
|
|
|
|
}
|
|
|
|
|
2005-08-24 11:44:24 +00:00
|
|
|
GST_DEBUG_OBJECT (trans, "calling transform_size");
|
2005-08-24 13:33:21 +00:00
|
|
|
if (!gst_base_transform_transform_size (trans,
|
|
|
|
GST_PAD_DIRECTION (pad), caps, size, srccaps, &new_size)) {
|
2005-08-04 19:40:43 +00:00
|
|
|
gst_caps_unref (srccaps);
|
|
|
|
goto unknown_size;
|
|
|
|
}
|
|
|
|
|
2005-12-05 13:01:35 +00:00
|
|
|
res =
|
|
|
|
gst_pad_alloc_buffer_and_set_caps (trans->srcpad, offset, new_size,
|
|
|
|
srccaps, buf);
|
2005-08-04 19:40:43 +00:00
|
|
|
gst_caps_unref (srccaps);
|
|
|
|
}
|
|
|
|
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
if (res == GST_FLOW_OK && !trans->have_same_caps) {
|
|
|
|
/* note that we might have had same caps before, but calling the
|
2005-08-04 19:40:43 +00:00
|
|
|
alloc_buffer caused setcaps to switch us out of in_place -- in any case
|
|
|
|
the alloc_buffer served to transmit caps information but we can't use the
|
|
|
|
buffer. fall through and allocate a buffer corresponding to our sink
|
|
|
|
caps, if any */
|
|
|
|
GstCaps *sinkcaps = gst_pad_get_negotiated_caps (trans->sinkpad);
|
2005-08-24 11:44:24 +00:00
|
|
|
GstCaps *srccaps = gst_pad_get_negotiated_caps (trans->srcpad);
|
2005-08-04 19:40:43 +00:00
|
|
|
|
|
|
|
if (!sinkcaps)
|
|
|
|
goto not_configured;
|
|
|
|
|
2005-08-24 13:33:21 +00:00
|
|
|
if (!gst_base_transform_transform_size (trans,
|
|
|
|
GST_PAD_DIRECTION (trans->srcpad), srccaps, GST_BUFFER_SIZE (*buf),
|
|
|
|
sinkcaps, &new_size)) {
|
2005-08-24 11:44:24 +00:00
|
|
|
gst_caps_unref (srccaps);
|
2005-08-04 19:40:43 +00:00
|
|
|
gst_caps_unref (sinkcaps);
|
|
|
|
goto unknown_size;
|
|
|
|
}
|
|
|
|
|
2005-08-24 11:44:24 +00:00
|
|
|
gst_buffer_unref (*buf);
|
|
|
|
|
|
|
|
*buf = gst_buffer_new_and_alloc (new_size);
|
2005-08-04 19:40:43 +00:00
|
|
|
gst_buffer_set_caps (*buf, sinkcaps);
|
|
|
|
GST_BUFFER_OFFSET (*buf) = offset;
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
res = GST_FLOW_OK;
|
2005-08-04 19:40:43 +00:00
|
|
|
|
2005-08-24 11:44:24 +00:00
|
|
|
gst_caps_unref (srccaps);
|
2005-08-04 19:40:43 +00:00
|
|
|
gst_caps_unref (sinkcaps);
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
}
|
|
|
|
|
libs/gst/base/gstbasetransform.c: Cleanups, separate normal flow from errors, add sensible
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
2006-03-08 10:17:41 +00:00
|
|
|
done:
|
|
|
|
g_mutex_unlock (trans->transform_lock);
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
gst_object_unref (trans);
|
2005-08-24 11:44:24 +00:00
|
|
|
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
return res;
|
2005-08-04 19:40:43 +00:00
|
|
|
|
|
|
|
not_configured:
|
|
|
|
{
|
|
|
|
/* let the default allocator handle it */
|
2005-08-24 11:44:24 +00:00
|
|
|
GST_DEBUG_OBJECT (trans, "not configured");
|
libs/gst/base/gstbasetransform.c: Cleanups, separate normal flow from errors, add sensible
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
2006-03-08 10:17:41 +00:00
|
|
|
gst_buffer_replace (buf, NULL);
|
|
|
|
res = GST_FLOW_OK;
|
|
|
|
goto done;
|
2005-08-04 19:40:43 +00:00
|
|
|
}
|
|
|
|
unknown_size:
|
|
|
|
{
|
|
|
|
/* let the default allocator handle it */
|
2005-08-24 11:44:24 +00:00
|
|
|
GST_DEBUG_OBJECT (trans, "unknown size");
|
libs/gst/base/gstbasetransform.c: Cleanups, separate normal flow from errors, add sensible
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
2006-03-08 10:17:41 +00:00
|
|
|
gst_buffer_replace (buf, NULL);
|
|
|
|
res = GST_FLOW_OK;
|
|
|
|
goto done;
|
2005-08-04 19:40:43 +00:00
|
|
|
}
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static gboolean
|
libs/gst/base/gstbasetransform.*: Make basetransform virtual method for src events too.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_sink_event),
(gst_base_transform_sink_eventfunc),
(gst_base_transform_src_event), (gst_base_transform_src_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_change_state), (gst_base_transform_update_qos),
(gst_base_transform_set_qos_enabled),
(gst_base_transform_is_qos_enabled):
* libs/gst/base/gstbasetransform.h:
Make basetransform virtual method for src events too.
Handle QOS in basetransform.
API: gst_base_transform_update_qos
API: gst_base_transform_set_qos_enabled
API: gst_base_transform_is_qos_enabled
2006-03-13 11:27:57 +00:00
|
|
|
gst_base_transform_sink_event (GstPad * pad, GstEvent * event)
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
{
|
|
|
|
GstBaseTransform *trans;
|
|
|
|
GstBaseTransformClass *bclass;
|
gst/base/gstbasetransform.c: The event virtual method is now properly implemented, with a default handler
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_event), (gst_base_transform_eventfunc):
The event virtual method is now properly implemented, with a default
handler
Sub classes should call the parent_class event method. They should
return FALSE if they had a problem handling the given event, or don't
want GstBaseTransform to send that even downstream
* gst/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_init), (gst_identity_event),
(gst_identity_transform_ip), (gst_identity_set_property),
(gst_identity_get_property):
* gst/elements/gstidentity.h:
Added the single-segment boolean property.
If set to TRUE, it will output a single segment of data, starting from
0, will eat up all incoming newsegment, and modify the timestamp of the
buffers accordingly
2005-11-29 14:47:07 +00:00
|
|
|
gboolean ret = TRUE;
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
|
docs/design/: Some more docs in the works.
Original commit message from CVS:
* docs/design/part-dynamic.txt:
* docs/design/part-events.txt:
* docs/design/part-seeking.txt:
Some more docs in the works.
* gst/base/gstbasetransform.c: (gst_base_transform_transform_caps),
(gst_base_transform_getcaps), (gst_base_transform_configure_caps),
(gst_base_transform_setcaps), (gst_base_transform_get_size),
(gst_base_transform_buffer_alloc), (gst_base_transform_event),
(gst_base_transform_handle_buffer),
(gst_base_transform_sink_activate_push),
(gst_base_transform_src_activate_pull),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
Refcounting fixes.
* gst/gstbus.c: (gst_bus_source_dispatch), (gst_bus_poll):
Cleanups.
* gst/gstevent.c: (gst_event_finalize):
Set SRC to NULL.
* gst/gstutils.c: (gst_element_unlink),
(gst_pad_get_parent_element), (gst_pad_proxy_getcaps),
(gst_pad_proxy_setcaps):
* gst/gstutils.h:
Add _get_parent_element() to get a pads parent as an element.
2005-07-18 08:28:48 +00:00
|
|
|
trans = GST_BASE_TRANSFORM (gst_pad_get_parent (pad));
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
bclass = GST_BASE_TRANSFORM_GET_CLASS (trans);
|
|
|
|
|
|
|
|
if (bclass->event)
|
gst/base/gstbasetransform.c: The event virtual method is now properly implemented, with a default handler
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_event), (gst_base_transform_eventfunc):
The event virtual method is now properly implemented, with a default
handler
Sub classes should call the parent_class event method. They should
return FALSE if they had a problem handling the given event, or don't
want GstBaseTransform to send that even downstream
* gst/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_init), (gst_identity_event),
(gst_identity_transform_ip), (gst_identity_set_property),
(gst_identity_get_property):
* gst/elements/gstidentity.h:
Added the single-segment boolean property.
If set to TRUE, it will output a single segment of data, starting from
0, will eat up all incoming newsegment, and modify the timestamp of the
buffers accordingly
2005-11-29 14:47:07 +00:00
|
|
|
ret = bclass->event (trans, event);
|
|
|
|
|
2005-12-02 11:36:50 +00:00
|
|
|
/* FIXME, do this in the default event handler so the subclass can do
|
|
|
|
* something different. */
|
gst/base/gstbasetransform.c: The event virtual method is now properly implemented, with a default handler
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_event), (gst_base_transform_eventfunc):
The event virtual method is now properly implemented, with a default
handler
Sub classes should call the parent_class event method. They should
return FALSE if they had a problem handling the given event, or don't
want GstBaseTransform to send that even downstream
* gst/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_init), (gst_identity_event),
(gst_identity_transform_ip), (gst_identity_set_property),
(gst_identity_get_property):
* gst/elements/gstidentity.h:
Added the single-segment boolean property.
If set to TRUE, it will output a single segment of data, starting from
0, will eat up all incoming newsegment, and modify the timestamp of the
buffers accordingly
2005-11-29 14:47:07 +00:00
|
|
|
if (ret)
|
libs/gst/base/gstbasetransform.*: Make basetransform virtual method for src events too.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_sink_event),
(gst_base_transform_sink_eventfunc),
(gst_base_transform_src_event), (gst_base_transform_src_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_change_state), (gst_base_transform_update_qos),
(gst_base_transform_set_qos_enabled),
(gst_base_transform_is_qos_enabled):
* libs/gst/base/gstbasetransform.h:
Make basetransform virtual method for src events too.
Handle QOS in basetransform.
API: gst_base_transform_update_qos
API: gst_base_transform_set_qos_enabled
API: gst_base_transform_is_qos_enabled
2006-03-13 11:27:57 +00:00
|
|
|
ret = gst_pad_push_event (trans->srcpad, event);
|
gst/base/gstbasetransform.c: The event virtual method is now properly implemented, with a default handler
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_event), (gst_base_transform_eventfunc):
The event virtual method is now properly implemented, with a default
handler
Sub classes should call the parent_class event method. They should
return FALSE if they had a problem handling the given event, or don't
want GstBaseTransform to send that even downstream
* gst/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_init), (gst_identity_event),
(gst_identity_transform_ip), (gst_identity_set_property),
(gst_identity_get_property):
* gst/elements/gstidentity.h:
Added the single-segment boolean property.
If set to TRUE, it will output a single segment of data, starting from
0, will eat up all incoming newsegment, and modify the timestamp of the
buffers accordingly
2005-11-29 14:47:07 +00:00
|
|
|
|
|
|
|
gst_object_unref (trans);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
|
gst/base/gstbasetransform.c: The event virtual method is now properly implemented, with a default handler
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_event), (gst_base_transform_eventfunc):
The event virtual method is now properly implemented, with a default
handler
Sub classes should call the parent_class event method. They should
return FALSE if they had a problem handling the given event, or don't
want GstBaseTransform to send that even downstream
* gst/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_init), (gst_identity_event),
(gst_identity_transform_ip), (gst_identity_set_property),
(gst_identity_get_property):
* gst/elements/gstidentity.h:
Added the single-segment boolean property.
If set to TRUE, it will output a single segment of data, starting from
0, will eat up all incoming newsegment, and modify the timestamp of the
buffers accordingly
2005-11-29 14:47:07 +00:00
|
|
|
static gboolean
|
libs/gst/base/gstbasetransform.*: Make basetransform virtual method for src events too.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_sink_event),
(gst_base_transform_sink_eventfunc),
(gst_base_transform_src_event), (gst_base_transform_src_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_change_state), (gst_base_transform_update_qos),
(gst_base_transform_set_qos_enabled),
(gst_base_transform_is_qos_enabled):
* libs/gst/base/gstbasetransform.h:
Make basetransform virtual method for src events too.
Handle QOS in basetransform.
API: gst_base_transform_update_qos
API: gst_base_transform_set_qos_enabled
API: gst_base_transform_is_qos_enabled
2006-03-13 11:27:57 +00:00
|
|
|
gst_base_transform_sink_eventfunc (GstBaseTransform * trans, GstEvent * event)
|
gst/base/gstbasetransform.c: The event virtual method is now properly implemented, with a default handler
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_event), (gst_base_transform_eventfunc):
The event virtual method is now properly implemented, with a default
handler
Sub classes should call the parent_class event method. They should
return FALSE if they had a problem handling the given event, or don't
want GstBaseTransform to send that even downstream
* gst/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_init), (gst_identity_event),
(gst_identity_transform_ip), (gst_identity_set_property),
(gst_identity_get_property):
* gst/elements/gstidentity.h:
Added the single-segment boolean property.
If set to TRUE, it will output a single segment of data, starting from
0, will eat up all incoming newsegment, and modify the timestamp of the
buffers accordingly
2005-11-29 14:47:07 +00:00
|
|
|
{
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
switch (GST_EVENT_TYPE (event)) {
|
Some docs updates
Original commit message from CVS:
* CHANGES-0.9:
* docs/design/part-TODO.txt:
* docs/design/part-events.txt:
Some docs updates
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_event), (gst_base_sink_do_sync),
(gst_base_sink_activate_push), (gst_base_sink_activate_pull):
* gst/base/gstbasesrc.c: (gst_base_src_send_discont),
(gst_base_src_do_seek), (gst_base_src_event_handler),
(gst_base_src_loop):
* gst/base/gstbasetransform.c: (gst_base_transform_transform_caps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_event), (gst_base_transform_handle_buffer),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/elements/gstfakesink.c: (gst_fake_sink_event):
* gst/elements/gstfilesink.c: (gst_file_sink_event):
Event updates.
* gst/gstbuffer.h:
Use faster casts.
* gst/gstelement.c: (gst_element_seek):
* gst/gstelement.h:
Update gst_element_seek.
* gst/gstevent.c: (gst_event_finalize), (_gst_event_copy),
(gst_event_new), (gst_event_new_custom), (gst_event_get_structure),
(gst_event_new_flush_start), (gst_event_new_flush_stop),
(gst_event_new_eos), (gst_event_new_newsegment),
(gst_event_parse_newsegment), (gst_event_new_tag),
(gst_event_parse_tag), (gst_event_new_filler), (gst_event_new_qos),
(gst_event_parse_qos), (gst_event_new_seek),
(gst_event_parse_seek), (gst_event_new_navigation):
* gst/gstevent.h:
Make GstEvent use GstStructure. Add parsing code, make sure the
API is sufficiently generic.
Mark possible directions of events and serialization.
* gst/gstmessage.c: (gst_message_init), (gst_message_finalize),
(_gst_message_copy), (gst_message_new_segment_start),
(gst_message_new_segment_done), (gst_message_new_custom),
(gst_message_parse_segment_start),
(gst_message_parse_segment_done):
Small cleanups.
* gst/gstpad.c: (gst_pad_get_caps_unlocked), (gst_pad_accept_caps),
(gst_pad_set_caps), (gst_pad_send_event):
Update for new events.
Catch events sent in wrong directions.
* gst/gstqueue.c: (gst_queue_link_src),
(gst_queue_handle_sink_event), (gst_queue_chain), (gst_queue_loop),
(gst_queue_handle_src_query):
Event updates.
* gst/gsttag.c:
* gst/gsttag.h:
Remove event code from this file.
* libs/gst/dataprotocol/dataprotocol.c: (gst_dp_packet_from_event),
(gst_dp_event_from_packet):
Event updates.
2005-07-27 18:33:03 +00:00
|
|
|
case GST_EVENT_FLUSH_START:
|
|
|
|
break;
|
|
|
|
case GST_EVENT_FLUSH_STOP:
|
libs/gst/base/gstbasetransform.*: Make basetransform virtual method for src events too.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_sink_event),
(gst_base_transform_sink_eventfunc),
(gst_base_transform_src_event), (gst_base_transform_src_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_change_state), (gst_base_transform_update_qos),
(gst_base_transform_set_qos_enabled),
(gst_base_transform_is_qos_enabled):
* libs/gst/base/gstbasetransform.h:
Make basetransform virtual method for src events too.
Handle QOS in basetransform.
API: gst_base_transform_update_qos
API: gst_base_transform_set_qos_enabled
API: gst_base_transform_is_qos_enabled
2006-03-13 11:27:57 +00:00
|
|
|
GST_OBJECT_LOCK (trans);
|
|
|
|
/* reset QoS parameters */
|
|
|
|
trans->priv->proportion = 1.0;
|
|
|
|
trans->priv->earliest_time = -1;
|
|
|
|
GST_OBJECT_UNLOCK (trans);
|
2005-11-15 16:47:07 +00:00
|
|
|
/* we need new segment info after the flush. */
|
2006-04-05 10:26:29 +00:00
|
|
|
trans->have_newsegment = FALSE;
|
More segment updates, replace code in plugins with segment helper functions.
Original commit message from CVS:
* check/gst/gstsegment.c: (GST_START_TEST):
* docs/design/part-TODO.txt:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_event), (gst_base_sink_do_sync),
(gst_base_sink_activate_pull), (gst_base_sink_get_position),
(gst_base_sink_query), (gst_base_sink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasesrc.c: (gst_base_src_init), (gst_base_src_query),
(gst_base_src_default_newsegment),
(gst_base_src_configure_segment), (gst_base_src_do_seek),
(gst_base_src_get_range), (gst_base_src_loop),
(gst_base_src_change_state):
* gst/base/gstbasesrc.h:
* gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf),
(gst_base_transform_event), (gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/base/gstcollectpads.c: (gst_collect_pads_add_pad),
(gst_collect_pads_event):
* gst/base/gstcollectpads.h:
* gst/elements/gstfakesrc.c: (gst_fake_src_init),
(gst_fake_src_create):
* gst/elements/gstfakesrc.h:
* gst/elements/gstidentity.c: (gst_identity_transform_ip):
* gst/gstsegment.c: (gst_segment_init), (gst_segment_set_duration),
(gst_segment_set_last_stop), (gst_segment_set_seek),
(gst_segment_set_newsegment), (gst_segment_to_stream_time),
(gst_segment_to_running_time), (gst_segment_clip):
* gst/gstsegment.h:
More segment updates, replace code in plugins with segment
helper functions.
2005-11-21 17:09:45 +00:00
|
|
|
gst_segment_init (&trans->segment, GST_FORMAT_UNDEFINED);
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
break;
|
|
|
|
case GST_EVENT_EOS:
|
|
|
|
break;
|
2005-11-08 12:33:09 +00:00
|
|
|
case GST_EVENT_TAG:
|
|
|
|
break;
|
2005-08-26 11:56:11 +00:00
|
|
|
case GST_EVENT_NEWSEGMENT:
|
|
|
|
{
|
|
|
|
GstFormat format;
|
docs/design/part-overview.txt: Make upsteam/downstream concepts more clear.
Original commit message from CVS:
* docs/design/part-overview.txt:
Make upsteam/downstream concepts more clear.
Give an example of serialized/non-serialized events.
* docs/design/part-events.txt:
* docs/design/part-streams.txt:
Mention applied_rate.
* docs/design/part-trickmodes.txt:
Mention applied rate, flesh out some more use cases.
* gst/gstevent.c: (gst_event_new_new_segment),
(gst_event_parse_new_segment), (gst_event_new_new_segment_full),
(gst_event_parse_new_segment_full), (gst_event_new_tag),
(gst_event_parse_tag), (gst_event_new_buffer_size),
(gst_event_parse_buffer_size), (gst_event_new_qos),
(gst_event_parse_qos), (gst_event_parse_seek),
(gst_event_new_navigation):
* gst/gstevent.h:
Add applied_rate field to NEWSEGMENT event.
API: gst_event_new_new_segment_full()
API: gst_event_parse_new_segment_full()
* gst/gstsegment.c: (gst_segment_init), (gst_segment_set_seek),
(gst_segment_set_newsegment), (gst_segment_set_newsegment_full),
(gst_segment_to_stream_time), (gst_segment_to_running_time):
* gst/gstsegment.h:
Add applied_rate to GstSegment structure.
Make calculation of stream_time and running_time more correct
wrt rate/applied_rate.
Add some more docs.
API: GstSegment::applied_rate field
API: gst_segment_set_newsegment_full();
* libs/gst/base/gstbasesink.c: (gst_base_sink_configure_segment),
(gst_base_sink_get_sync_times), (gst_base_sink_get_position):
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer):
Parse and use applied_rate in the GstSegment field.
* tests/check/gst/gstevent.c: (GST_START_TEST):
Add check for applied_rate field.
* tests/check/gst/gstsegment.c: (GST_START_TEST),
(gstsegments_suite):
Add more checks for various GstSegment operations.
2006-05-08 09:52:33 +00:00
|
|
|
gdouble rate, arate;
|
More segment updates, replace code in plugins with segment helper functions.
Original commit message from CVS:
* check/gst/gstsegment.c: (GST_START_TEST):
* docs/design/part-TODO.txt:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_event), (gst_base_sink_do_sync),
(gst_base_sink_activate_pull), (gst_base_sink_get_position),
(gst_base_sink_query), (gst_base_sink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasesrc.c: (gst_base_src_init), (gst_base_src_query),
(gst_base_src_default_newsegment),
(gst_base_src_configure_segment), (gst_base_src_do_seek),
(gst_base_src_get_range), (gst_base_src_loop),
(gst_base_src_change_state):
* gst/base/gstbasesrc.h:
* gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf),
(gst_base_transform_event), (gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/base/gstcollectpads.c: (gst_collect_pads_add_pad),
(gst_collect_pads_event):
* gst/base/gstcollectpads.h:
* gst/elements/gstfakesrc.c: (gst_fake_src_init),
(gst_fake_src_create):
* gst/elements/gstfakesrc.h:
* gst/elements/gstidentity.c: (gst_identity_transform_ip):
* gst/gstsegment.c: (gst_segment_init), (gst_segment_set_duration),
(gst_segment_set_last_stop), (gst_segment_set_seek),
(gst_segment_set_newsegment), (gst_segment_to_stream_time),
(gst_segment_to_running_time), (gst_segment_clip):
* gst/gstsegment.h:
More segment updates, replace code in plugins with segment
helper functions.
2005-11-21 17:09:45 +00:00
|
|
|
gint64 start, stop, time;
|
2005-10-11 16:28:49 +00:00
|
|
|
gboolean update;
|
2005-08-26 11:56:11 +00:00
|
|
|
|
docs/design/part-overview.txt: Make upsteam/downstream concepts more clear.
Original commit message from CVS:
* docs/design/part-overview.txt:
Make upsteam/downstream concepts more clear.
Give an example of serialized/non-serialized events.
* docs/design/part-events.txt:
* docs/design/part-streams.txt:
Mention applied_rate.
* docs/design/part-trickmodes.txt:
Mention applied rate, flesh out some more use cases.
* gst/gstevent.c: (gst_event_new_new_segment),
(gst_event_parse_new_segment), (gst_event_new_new_segment_full),
(gst_event_parse_new_segment_full), (gst_event_new_tag),
(gst_event_parse_tag), (gst_event_new_buffer_size),
(gst_event_parse_buffer_size), (gst_event_new_qos),
(gst_event_parse_qos), (gst_event_parse_seek),
(gst_event_new_navigation):
* gst/gstevent.h:
Add applied_rate field to NEWSEGMENT event.
API: gst_event_new_new_segment_full()
API: gst_event_parse_new_segment_full()
* gst/gstsegment.c: (gst_segment_init), (gst_segment_set_seek),
(gst_segment_set_newsegment), (gst_segment_set_newsegment_full),
(gst_segment_to_stream_time), (gst_segment_to_running_time):
* gst/gstsegment.h:
Add applied_rate to GstSegment structure.
Make calculation of stream_time and running_time more correct
wrt rate/applied_rate.
Add some more docs.
API: GstSegment::applied_rate field
API: gst_segment_set_newsegment_full();
* libs/gst/base/gstbasesink.c: (gst_base_sink_configure_segment),
(gst_base_sink_get_sync_times), (gst_base_sink_get_position):
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer):
Parse and use applied_rate in the GstSegment field.
* tests/check/gst/gstevent.c: (GST_START_TEST):
Add check for applied_rate field.
* tests/check/gst/gstsegment.c: (GST_START_TEST),
(gstsegments_suite):
Add more checks for various GstSegment operations.
2006-05-08 09:52:33 +00:00
|
|
|
gst_event_parse_new_segment_full (event, &update, &rate, &arate, &format,
|
|
|
|
&start, &stop, &time);
|
2005-11-15 16:47:07 +00:00
|
|
|
|
|
|
|
trans->have_newsegment = TRUE;
|
|
|
|
|
2005-08-26 11:56:11 +00:00
|
|
|
if (format == GST_FORMAT_TIME) {
|
gst/gstbus.c: Small documentation clarification about the signal watch.
Original commit message from CVS:
* gst/gstbus.c:
Small documentation clarification about the signal watch.
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_wait_clock), (gst_base_sink_do_sync),
(gst_base_sink_perform_qos), (gst_base_sink_reset_qos),
(gst_base_sink_do_render_stats), (gst_base_sink_render_object),
(gst_base_sink_get_position_last),
(gst_base_sink_get_position_paused), (gst_base_sink_change_state):
Convert and store timestamps in stream time and running time, the
raw timestamps are not usefull, also document this better.
Use different window sizes for good and bad QoS observations so
we react to badness a little quicker.
Keep track of the amount of rendered and dropped buffers.
Send QoS timestamps in running time.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer):
Compare QoS timestamps against running time.
2006-04-07 14:02:12 +00:00
|
|
|
GST_DEBUG_OBJECT (trans, "received TIME NEW_SEGMENT %" GST_TIME_FORMAT
|
2005-11-15 17:18:10 +00:00
|
|
|
" -- %" GST_TIME_FORMAT ", time %" GST_TIME_FORMAT
|
|
|
|
", accum %" GST_TIME_FORMAT,
|
More segment updates, replace code in plugins with segment helper functions.
Original commit message from CVS:
* check/gst/gstsegment.c: (GST_START_TEST):
* docs/design/part-TODO.txt:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_event), (gst_base_sink_do_sync),
(gst_base_sink_activate_pull), (gst_base_sink_get_position),
(gst_base_sink_query), (gst_base_sink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasesrc.c: (gst_base_src_init), (gst_base_src_query),
(gst_base_src_default_newsegment),
(gst_base_src_configure_segment), (gst_base_src_do_seek),
(gst_base_src_get_range), (gst_base_src_loop),
(gst_base_src_change_state):
* gst/base/gstbasesrc.h:
* gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf),
(gst_base_transform_event), (gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/base/gstcollectpads.c: (gst_collect_pads_add_pad),
(gst_collect_pads_event):
* gst/base/gstcollectpads.h:
* gst/elements/gstfakesrc.c: (gst_fake_src_init),
(gst_fake_src_create):
* gst/elements/gstfakesrc.h:
* gst/elements/gstidentity.c: (gst_identity_transform_ip):
* gst/gstsegment.c: (gst_segment_init), (gst_segment_set_duration),
(gst_segment_set_last_stop), (gst_segment_set_seek),
(gst_segment_set_newsegment), (gst_segment_to_stream_time),
(gst_segment_to_running_time), (gst_segment_clip):
* gst/gstsegment.h:
More segment updates, replace code in plugins with segment
helper functions.
2005-11-21 17:09:45 +00:00
|
|
|
GST_TIME_ARGS (trans->segment.start),
|
|
|
|
GST_TIME_ARGS (trans->segment.stop),
|
|
|
|
GST_TIME_ARGS (trans->segment.time),
|
|
|
|
GST_TIME_ARGS (trans->segment.accum));
|
2005-08-26 11:56:11 +00:00
|
|
|
} else {
|
2005-11-15 16:47:07 +00:00
|
|
|
GST_DEBUG_OBJECT (trans, "received NEW_SEGMENT %" G_GINT64_FORMAT
|
2005-11-15 17:18:10 +00:00
|
|
|
" -- %" G_GINT64_FORMAT ", time %" G_GINT64_FORMAT
|
|
|
|
", accum %" G_GINT64_FORMAT,
|
More segment updates, replace code in plugins with segment helper functions.
Original commit message from CVS:
* check/gst/gstsegment.c: (GST_START_TEST):
* docs/design/part-TODO.txt:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_event), (gst_base_sink_do_sync),
(gst_base_sink_activate_pull), (gst_base_sink_get_position),
(gst_base_sink_query), (gst_base_sink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasesrc.c: (gst_base_src_init), (gst_base_src_query),
(gst_base_src_default_newsegment),
(gst_base_src_configure_segment), (gst_base_src_do_seek),
(gst_base_src_get_range), (gst_base_src_loop),
(gst_base_src_change_state):
* gst/base/gstbasesrc.h:
* gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf),
(gst_base_transform_event), (gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/base/gstcollectpads.c: (gst_collect_pads_add_pad),
(gst_collect_pads_event):
* gst/base/gstcollectpads.h:
* gst/elements/gstfakesrc.c: (gst_fake_src_init),
(gst_fake_src_create):
* gst/elements/gstfakesrc.h:
* gst/elements/gstidentity.c: (gst_identity_transform_ip):
* gst/gstsegment.c: (gst_segment_init), (gst_segment_set_duration),
(gst_segment_set_last_stop), (gst_segment_set_seek),
(gst_segment_set_newsegment), (gst_segment_to_stream_time),
(gst_segment_to_running_time), (gst_segment_clip):
* gst/gstsegment.h:
More segment updates, replace code in plugins with segment
helper functions.
2005-11-21 17:09:45 +00:00
|
|
|
trans->segment.start, trans->segment.stop,
|
|
|
|
trans->segment.time, trans->segment.accum);
|
2005-08-26 11:56:11 +00:00
|
|
|
}
|
2006-06-14 10:31:43 +00:00
|
|
|
|
|
|
|
gst_segment_set_newsegment_full (&trans->segment, update, rate, arate,
|
|
|
|
format, start, stop, time);
|
2005-08-26 11:56:11 +00:00
|
|
|
break;
|
|
|
|
}
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
gst/base/gstbasetransform.c: The event virtual method is now properly implemented, with a default handler
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_event), (gst_base_transform_eventfunc):
The event virtual method is now properly implemented, with a default
handler
Sub classes should call the parent_class event method. They should
return FALSE if they had a problem handling the given event, or don't
want GstBaseTransform to send that even downstream
* gst/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_init), (gst_identity_event),
(gst_identity_transform_ip), (gst_identity_set_property),
(gst_identity_get_property):
* gst/elements/gstidentity.h:
Added the single-segment boolean property.
If set to TRUE, it will output a single segment of data, starting from
0, will eat up all incoming newsegment, and modify the timestamp of the
buffers accordingly
2005-11-29 14:47:07 +00:00
|
|
|
return TRUE;
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
}
|
|
|
|
|
libs/gst/base/gstbasetransform.*: Make basetransform virtual method for src events too.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_sink_event),
(gst_base_transform_sink_eventfunc),
(gst_base_transform_src_event), (gst_base_transform_src_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_change_state), (gst_base_transform_update_qos),
(gst_base_transform_set_qos_enabled),
(gst_base_transform_is_qos_enabled):
* libs/gst/base/gstbasetransform.h:
Make basetransform virtual method for src events too.
Handle QOS in basetransform.
API: gst_base_transform_update_qos
API: gst_base_transform_set_qos_enabled
API: gst_base_transform_is_qos_enabled
2006-03-13 11:27:57 +00:00
|
|
|
static gboolean
|
|
|
|
gst_base_transform_src_event (GstPad * pad, GstEvent * event)
|
|
|
|
{
|
|
|
|
GstBaseTransform *trans;
|
|
|
|
GstBaseTransformClass *bclass;
|
|
|
|
gboolean ret = TRUE;
|
|
|
|
|
|
|
|
trans = GST_BASE_TRANSFORM (gst_pad_get_parent (pad));
|
|
|
|
bclass = GST_BASE_TRANSFORM_GET_CLASS (trans);
|
|
|
|
|
|
|
|
if (bclass->src_event)
|
|
|
|
ret = bclass->src_event (trans, event);
|
|
|
|
|
|
|
|
gst_object_unref (trans);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static gboolean
|
|
|
|
gst_base_transform_src_eventfunc (GstBaseTransform * trans, GstEvent * event)
|
|
|
|
{
|
|
|
|
gboolean ret;
|
|
|
|
|
|
|
|
switch (GST_EVENT_TYPE (event)) {
|
|
|
|
case GST_EVENT_SEEK:
|
|
|
|
break;
|
|
|
|
case GST_EVENT_NAVIGATION:
|
|
|
|
break;
|
|
|
|
case GST_EVENT_QOS:
|
|
|
|
{
|
|
|
|
gdouble proportion;
|
|
|
|
GstClockTimeDiff diff;
|
|
|
|
GstClockTime timestamp;
|
|
|
|
|
|
|
|
gst_event_parse_qos (event, &proportion, &diff, ×tamp);
|
|
|
|
gst_base_transform_update_qos (trans, proportion, diff, timestamp);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = gst_pad_push_event (trans->sinkpad, event);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
static GstFlowReturn
|
|
|
|
gst_base_transform_handle_buffer (GstBaseTransform * trans, GstBuffer * inbuf,
|
|
|
|
GstBuffer ** outbuf)
|
|
|
|
{
|
|
|
|
GstBaseTransformClass *bclass;
|
|
|
|
GstFlowReturn ret = GST_FLOW_OK;
|
2005-08-24 11:44:24 +00:00
|
|
|
guint out_size;
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
gboolean want_in_place;
|
gst/gstbus.c: Small documentation clarification about the signal watch.
Original commit message from CVS:
* gst/gstbus.c:
Small documentation clarification about the signal watch.
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_wait_clock), (gst_base_sink_do_sync),
(gst_base_sink_perform_qos), (gst_base_sink_reset_qos),
(gst_base_sink_do_render_stats), (gst_base_sink_render_object),
(gst_base_sink_get_position_last),
(gst_base_sink_get_position_paused), (gst_base_sink_change_state):
Convert and store timestamps in stream time and running time, the
raw timestamps are not usefull, also document this better.
Use different window sizes for good and bad QoS observations so
we react to badness a little quicker.
Keep track of the amount of rendered and dropped buffers.
Send QoS timestamps in running time.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer):
Compare QoS timestamps against running time.
2006-04-07 14:02:12 +00:00
|
|
|
GstClockTime qostime;
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
|
|
|
|
bclass = GST_BASE_TRANSFORM_GET_CLASS (trans);
|
|
|
|
|
2005-08-26 11:19:22 +00:00
|
|
|
if (GST_BUFFER_OFFSET_IS_VALID (inbuf))
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
GST_LOG_OBJECT (trans, "handling buffer %p of size %d and offset %"
|
|
|
|
G_GUINT64_FORMAT, inbuf, GST_BUFFER_SIZE (inbuf),
|
2005-08-26 11:19:22 +00:00
|
|
|
GST_BUFFER_OFFSET (inbuf));
|
|
|
|
else
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
GST_LOG_OBJECT (trans, "handling buffer %p of size %d and offset NONE",
|
|
|
|
inbuf, GST_BUFFER_SIZE (inbuf));
|
2005-08-26 11:19:22 +00:00
|
|
|
|
2005-09-09 23:45:15 +00:00
|
|
|
/* Don't allow buffer handling before negotiation, except in passthrough mode
|
|
|
|
* or if the class doesn't implement a set_caps function (in which case it doesn't
|
|
|
|
* care about caps)
|
|
|
|
*/
|
|
|
|
if (!trans->negotiated && !trans->passthrough && (bclass->set_caps != NULL))
|
2005-08-31 13:50:40 +00:00
|
|
|
goto not_negotiated;
|
|
|
|
|
gst/gstbus.c: Small documentation clarification about the signal watch.
Original commit message from CVS:
* gst/gstbus.c:
Small documentation clarification about the signal watch.
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_wait_clock), (gst_base_sink_do_sync),
(gst_base_sink_perform_qos), (gst_base_sink_reset_qos),
(gst_base_sink_do_render_stats), (gst_base_sink_render_object),
(gst_base_sink_get_position_last),
(gst_base_sink_get_position_paused), (gst_base_sink_change_state):
Convert and store timestamps in stream time and running time, the
raw timestamps are not usefull, also document this better.
Use different window sizes for good and bad QoS observations so
we react to badness a little quicker.
Keep track of the amount of rendered and dropped buffers.
Send QoS timestamps in running time.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer):
Compare QoS timestamps against running time.
2006-04-07 14:02:12 +00:00
|
|
|
/* can only do QoS if the segment is in TIME */
|
|
|
|
if (trans->segment.format != GST_FORMAT_TIME)
|
|
|
|
goto no_qos;
|
|
|
|
|
|
|
|
qostime = gst_segment_to_running_time (&trans->segment, GST_FORMAT_TIME,
|
|
|
|
GST_BUFFER_TIMESTAMP (inbuf));
|
|
|
|
|
|
|
|
if (qostime != -1) {
|
libs/gst/base/gstbasetransform.*: Make basetransform virtual method for src events too.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_sink_event),
(gst_base_transform_sink_eventfunc),
(gst_base_transform_src_event), (gst_base_transform_src_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_change_state), (gst_base_transform_update_qos),
(gst_base_transform_set_qos_enabled),
(gst_base_transform_is_qos_enabled):
* libs/gst/base/gstbasetransform.h:
Make basetransform virtual method for src events too.
Handle QOS in basetransform.
API: gst_base_transform_update_qos
API: gst_base_transform_set_qos_enabled
API: gst_base_transform_is_qos_enabled
2006-03-13 11:27:57 +00:00
|
|
|
gboolean need_skip;
|
|
|
|
GstClockTime earliest_time;
|
|
|
|
|
|
|
|
GST_OBJECT_LOCK (trans);
|
|
|
|
earliest_time = trans->priv->earliest_time;
|
|
|
|
/* check for QoS, don't perform conversion for buffers
|
|
|
|
* that are known to be late. */
|
|
|
|
need_skip = trans->priv->qos_enabled &&
|
gst/gstbus.c: Small documentation clarification about the signal watch.
Original commit message from CVS:
* gst/gstbus.c:
Small documentation clarification about the signal watch.
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_wait_clock), (gst_base_sink_do_sync),
(gst_base_sink_perform_qos), (gst_base_sink_reset_qos),
(gst_base_sink_do_render_stats), (gst_base_sink_render_object),
(gst_base_sink_get_position_last),
(gst_base_sink_get_position_paused), (gst_base_sink_change_state):
Convert and store timestamps in stream time and running time, the
raw timestamps are not usefull, also document this better.
Use different window sizes for good and bad QoS observations so
we react to badness a little quicker.
Keep track of the amount of rendered and dropped buffers.
Send QoS timestamps in running time.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer):
Compare QoS timestamps against running time.
2006-04-07 14:02:12 +00:00
|
|
|
earliest_time != -1 && qostime != -1 && qostime <= earliest_time;
|
libs/gst/base/gstbasetransform.*: Make basetransform virtual method for src events too.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_sink_event),
(gst_base_transform_sink_eventfunc),
(gst_base_transform_src_event), (gst_base_transform_src_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_change_state), (gst_base_transform_update_qos),
(gst_base_transform_set_qos_enabled),
(gst_base_transform_is_qos_enabled):
* libs/gst/base/gstbasetransform.h:
Make basetransform virtual method for src events too.
Handle QOS in basetransform.
API: gst_base_transform_update_qos
API: gst_base_transform_set_qos_enabled
API: gst_base_transform_is_qos_enabled
2006-03-13 11:27:57 +00:00
|
|
|
GST_OBJECT_UNLOCK (trans);
|
|
|
|
|
|
|
|
if (need_skip) {
|
gst/gstbus.c: Small documentation clarification about the signal watch.
Original commit message from CVS:
* gst/gstbus.c:
Small documentation clarification about the signal watch.
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_wait_clock), (gst_base_sink_do_sync),
(gst_base_sink_perform_qos), (gst_base_sink_reset_qos),
(gst_base_sink_do_render_stats), (gst_base_sink_render_object),
(gst_base_sink_get_position_last),
(gst_base_sink_get_position_paused), (gst_base_sink_change_state):
Convert and store timestamps in stream time and running time, the
raw timestamps are not usefull, also document this better.
Use different window sizes for good and bad QoS observations so
we react to badness a little quicker.
Keep track of the amount of rendered and dropped buffers.
Send QoS timestamps in running time.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer):
Compare QoS timestamps against running time.
2006-04-07 14:02:12 +00:00
|
|
|
GST_CAT_DEBUG_OBJECT (GST_CAT_QOS, trans, "skipping transform: qostime %"
|
libs/gst/base/gstbasetransform.*: Make basetransform virtual method for src events too.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_sink_event),
(gst_base_transform_sink_eventfunc),
(gst_base_transform_src_event), (gst_base_transform_src_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_change_state), (gst_base_transform_update_qos),
(gst_base_transform_set_qos_enabled),
(gst_base_transform_is_qos_enabled):
* libs/gst/base/gstbasetransform.h:
Make basetransform virtual method for src events too.
Handle QOS in basetransform.
API: gst_base_transform_update_qos
API: gst_base_transform_set_qos_enabled
API: gst_base_transform_is_qos_enabled
2006-03-13 11:27:57 +00:00
|
|
|
GST_TIME_FORMAT " <= %" GST_TIME_FORMAT,
|
gst/gstbus.c: Small documentation clarification about the signal watch.
Original commit message from CVS:
* gst/gstbus.c:
Small documentation clarification about the signal watch.
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_wait_clock), (gst_base_sink_do_sync),
(gst_base_sink_perform_qos), (gst_base_sink_reset_qos),
(gst_base_sink_do_render_stats), (gst_base_sink_render_object),
(gst_base_sink_get_position_last),
(gst_base_sink_get_position_paused), (gst_base_sink_change_state):
Convert and store timestamps in stream time and running time, the
raw timestamps are not usefull, also document this better.
Use different window sizes for good and bad QoS observations so
we react to badness a little quicker.
Keep track of the amount of rendered and dropped buffers.
Send QoS timestamps in running time.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer):
Compare QoS timestamps against running time.
2006-04-07 14:02:12 +00:00
|
|
|
GST_TIME_ARGS (qostime), GST_TIME_ARGS (earliest_time));
|
libs/gst/base/gstbasetransform.*: Make basetransform virtual method for src events too.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_sink_event),
(gst_base_transform_sink_eventfunc),
(gst_base_transform_src_event), (gst_base_transform_src_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_change_state), (gst_base_transform_update_qos),
(gst_base_transform_set_qos_enabled),
(gst_base_transform_is_qos_enabled):
* libs/gst/base/gstbasetransform.h:
Make basetransform virtual method for src events too.
Handle QOS in basetransform.
API: gst_base_transform_update_qos
API: gst_base_transform_set_qos_enabled
API: gst_base_transform_is_qos_enabled
2006-03-13 11:27:57 +00:00
|
|
|
goto skip;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
gst/gstbus.c: Small documentation clarification about the signal watch.
Original commit message from CVS:
* gst/gstbus.c:
Small documentation clarification about the signal watch.
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_wait_clock), (gst_base_sink_do_sync),
(gst_base_sink_perform_qos), (gst_base_sink_reset_qos),
(gst_base_sink_do_render_stats), (gst_base_sink_render_object),
(gst_base_sink_get_position_last),
(gst_base_sink_get_position_paused), (gst_base_sink_change_state):
Convert and store timestamps in stream time and running time, the
raw timestamps are not usefull, also document this better.
Use different window sizes for good and bad QoS observations so
we react to badness a little quicker.
Keep track of the amount of rendered and dropped buffers.
Send QoS timestamps in running time.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer):
Compare QoS timestamps against running time.
2006-04-07 14:02:12 +00:00
|
|
|
no_qos:
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
if (trans->passthrough) {
|
|
|
|
/* In passthrough mode, give transform_ip a look at the
|
|
|
|
* buffer, without making it writable, or just push the
|
|
|
|
* data through */
|
|
|
|
GST_LOG_OBJECT (trans, "element is in passthrough mode");
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
if (bclass->transform_ip)
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
ret = bclass->transform_ip (trans, inbuf);
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
|
|
|
|
*outbuf = inbuf;
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
want_in_place = (bclass->transform_ip != NULL) && trans->always_in_place;
|
2005-09-09 23:45:15 +00:00
|
|
|
*outbuf = NULL;
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
|
|
|
|
if (want_in_place) {
|
2005-10-15 15:30:24 +00:00
|
|
|
/* If want_in_place is TRUE, we may need to prepare a new output buffer
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
* Sub-classes can implement a prepare_output_buffer function as they
|
|
|
|
* wish. */
|
|
|
|
GST_LOG_OBJECT (trans, "doing inplace transform");
|
|
|
|
|
libs/gst/base/gstbasetransform.c: Cleanups, separate normal flow from errors, add sensible
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
2006-03-08 10:17:41 +00:00
|
|
|
ret = gst_base_transform_prepare_output_buffer (trans, inbuf,
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
GST_BUFFER_SIZE (inbuf), GST_PAD_CAPS (trans->srcpad), outbuf);
|
|
|
|
if (G_UNLIKELY (ret != GST_FLOW_OK))
|
|
|
|
goto no_buffer;
|
|
|
|
|
|
|
|
ret = bclass->transform_ip (trans, *outbuf);
|
|
|
|
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
} else {
|
2005-08-26 11:19:22 +00:00
|
|
|
GST_LOG_OBJECT (trans, "doing non-inplace transform");
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
|
|
|
|
/* not transforming inplace, figure out the output size */
|
|
|
|
if (trans->always_in_place) {
|
|
|
|
out_size = GST_BUFFER_SIZE (inbuf);
|
|
|
|
} else {
|
|
|
|
if (!gst_base_transform_transform_size (trans,
|
|
|
|
GST_PAD_DIRECTION (trans->sinkpad), GST_PAD_CAPS (trans->sinkpad),
|
|
|
|
GST_BUFFER_SIZE (inbuf), GST_PAD_CAPS (trans->srcpad),
|
|
|
|
&out_size)) {
|
|
|
|
/* we have an error */
|
|
|
|
goto no_size;
|
|
|
|
}
|
2005-08-24 13:33:21 +00:00
|
|
|
}
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
|
|
|
|
/* no in place transform, get buffer, this might renegotiate. */
|
libs/gst/base/gstbasetransform.c: Cleanups, separate normal flow from errors, add sensible
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
2006-03-08 10:17:41 +00:00
|
|
|
ret = gst_base_transform_prepare_output_buffer (trans, inbuf, out_size,
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
GST_PAD_CAPS (trans->srcpad), outbuf);
|
|
|
|
if (ret != GST_FLOW_OK)
|
|
|
|
goto no_buffer;
|
|
|
|
|
|
|
|
if (bclass->transform)
|
|
|
|
ret = bclass->transform (trans, inbuf, *outbuf);
|
|
|
|
else
|
|
|
|
ret = GST_FLOW_NOT_SUPPORTED;
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
}
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
/* if we got renegotiated we can configure now */
|
|
|
|
if (trans->pending_configure) {
|
|
|
|
gboolean success;
|
2005-08-24 11:44:24 +00:00
|
|
|
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
success =
|
|
|
|
gst_base_transform_configure_caps (trans,
|
|
|
|
GST_PAD_CAPS (trans->sinkpad), GST_PAD_CAPS (trans->srcpad));
|
2005-08-24 11:44:24 +00:00
|
|
|
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
trans->pending_configure = FALSE;
|
2005-08-24 11:44:24 +00:00
|
|
|
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
if (!success)
|
|
|
|
goto configure_failed;
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
}
|
libs/gst/base/gstbasetransform.*: Make basetransform virtual method for src events too.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_sink_event),
(gst_base_transform_sink_eventfunc),
(gst_base_transform_src_event), (gst_base_transform_src_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_change_state), (gst_base_transform_update_qos),
(gst_base_transform_set_qos_enabled),
(gst_base_transform_is_qos_enabled):
* libs/gst/base/gstbasetransform.h:
Make basetransform virtual method for src events too.
Handle QOS in basetransform.
API: gst_base_transform_update_qos
API: gst_base_transform_set_qos_enabled
API: gst_base_transform_is_qos_enabled
2006-03-13 11:27:57 +00:00
|
|
|
skip:
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
gst_buffer_unref (inbuf);
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
/* ERRORS */
|
2005-08-31 13:50:40 +00:00
|
|
|
not_negotiated:
|
|
|
|
{
|
|
|
|
gst_buffer_unref (inbuf);
|
|
|
|
GST_ELEMENT_ERROR (trans, STREAM, NOT_IMPLEMENTED,
|
|
|
|
("not negotiated"), ("not negotiated"));
|
|
|
|
return GST_FLOW_NOT_NEGOTIATED;
|
|
|
|
}
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
no_size:
|
|
|
|
{
|
|
|
|
gst_buffer_unref (inbuf);
|
|
|
|
GST_ELEMENT_ERROR (trans, STREAM, NOT_IMPLEMENTED,
|
|
|
|
("subclass did not specify output size"),
|
|
|
|
("subclass did not specify output size"));
|
|
|
|
return GST_FLOW_ERROR;
|
|
|
|
}
|
|
|
|
no_buffer:
|
|
|
|
{
|
|
|
|
gst_buffer_unref (inbuf);
|
libs/gst/base/gstbasetransform.c: Cleanups, separate normal flow from errors, add sensible
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
2006-03-08 10:17:41 +00:00
|
|
|
GST_DEBUG_OBJECT (trans, "could not get buffer from pool: %s",
|
|
|
|
gst_flow_get_name (ret));
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
return ret;
|
|
|
|
}
|
2005-08-24 11:44:24 +00:00
|
|
|
configure_failed:
|
|
|
|
{
|
|
|
|
gst_buffer_unref (inbuf);
|
|
|
|
GST_DEBUG_OBJECT (trans, "could not negotiate");
|
|
|
|
return GST_FLOW_NOT_NEGOTIATED;
|
|
|
|
}
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
}
|
|
|
|
|
2005-08-24 11:44:24 +00:00
|
|
|
/* FIXME, getrange is broken, need to pull range from the other
|
2005-08-26 11:19:22 +00:00
|
|
|
* end based on the transform_size result.
|
2005-08-24 11:44:24 +00:00
|
|
|
*/
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
static GstFlowReturn
|
|
|
|
gst_base_transform_getrange (GstPad * pad, guint64 offset,
|
|
|
|
guint length, GstBuffer ** buffer)
|
|
|
|
{
|
|
|
|
GstBaseTransform *trans;
|
|
|
|
GstFlowReturn ret;
|
|
|
|
GstBuffer *inbuf;
|
|
|
|
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
trans = GST_BASE_TRANSFORM (gst_pad_get_parent (pad));
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
|
|
|
|
ret = gst_pad_pull_range (trans->sinkpad, offset, length, &inbuf);
|
|
|
|
if (ret == GST_FLOW_OK) {
|
2005-10-27 20:59:00 +00:00
|
|
|
g_mutex_lock (trans->transform_lock);
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
ret = gst_base_transform_handle_buffer (trans, inbuf, buffer);
|
2005-10-27 20:59:00 +00:00
|
|
|
g_mutex_unlock (trans->transform_lock);
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
}
|
|
|
|
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
gst_object_unref (trans);
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static GstFlowReturn
|
|
|
|
gst_base_transform_chain (GstPad * pad, GstBuffer * buffer)
|
|
|
|
{
|
|
|
|
GstBaseTransform *trans;
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
GstFlowReturn ret;
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
GstBuffer *outbuf = NULL;
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
trans = GST_BASE_TRANSFORM (gst_pad_get_parent (pad));
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
|
2005-10-27 20:59:00 +00:00
|
|
|
/* protect transform method and concurrent buffer alloc */
|
|
|
|
g_mutex_lock (trans->transform_lock);
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
ret = gst_base_transform_handle_buffer (trans, buffer, &outbuf);
|
2005-10-27 20:59:00 +00:00
|
|
|
g_mutex_unlock (trans->transform_lock);
|
|
|
|
|
libs/gst/base/gstbasetransform.*: Make basetransform virtual method for src events too.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_sink_event),
(gst_base_transform_sink_eventfunc),
(gst_base_transform_src_event), (gst_base_transform_src_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_change_state), (gst_base_transform_update_qos),
(gst_base_transform_set_qos_enabled),
(gst_base_transform_is_qos_enabled):
* libs/gst/base/gstbasetransform.h:
Make basetransform virtual method for src events too.
Handle QOS in basetransform.
API: gst_base_transform_update_qos
API: gst_base_transform_set_qos_enabled
API: gst_base_transform_is_qos_enabled
2006-03-13 11:27:57 +00:00
|
|
|
/* outbuf can be NULL, this means a dropped buffer */
|
|
|
|
if (outbuf != NULL) {
|
|
|
|
if (ret == GST_FLOW_OK)
|
|
|
|
ret = gst_pad_push (trans->srcpad, outbuf);
|
|
|
|
else
|
|
|
|
gst_buffer_unref (outbuf);
|
|
|
|
}
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
gst_object_unref (trans);
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
gst_base_transform_set_property (GObject * object, guint prop_id,
|
|
|
|
const GValue * value, GParamSpec * pspec)
|
|
|
|
{
|
|
|
|
GstBaseTransform *trans;
|
|
|
|
|
|
|
|
trans = GST_BASE_TRANSFORM (object);
|
|
|
|
|
|
|
|
switch (prop_id) {
|
libs/gst/base/gstbasetransform.*: Make basetransform virtual method for src events too.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_sink_event),
(gst_base_transform_sink_eventfunc),
(gst_base_transform_src_event), (gst_base_transform_src_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_change_state), (gst_base_transform_update_qos),
(gst_base_transform_set_qos_enabled),
(gst_base_transform_is_qos_enabled):
* libs/gst/base/gstbasetransform.h:
Make basetransform virtual method for src events too.
Handle QOS in basetransform.
API: gst_base_transform_update_qos
API: gst_base_transform_set_qos_enabled
API: gst_base_transform_is_qos_enabled
2006-03-13 11:27:57 +00:00
|
|
|
case PROP_QOS:
|
|
|
|
gst_base_transform_set_qos_enabled (trans, g_value_get_boolean (value));
|
|
|
|
break;
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
default:
|
|
|
|
G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
|
|
gst_base_transform_get_property (GObject * object, guint prop_id,
|
|
|
|
GValue * value, GParamSpec * pspec)
|
|
|
|
{
|
|
|
|
GstBaseTransform *trans;
|
|
|
|
|
|
|
|
trans = GST_BASE_TRANSFORM (object);
|
|
|
|
|
|
|
|
switch (prop_id) {
|
libs/gst/base/gstbasetransform.*: Make basetransform virtual method for src events too.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_sink_event),
(gst_base_transform_sink_eventfunc),
(gst_base_transform_src_event), (gst_base_transform_src_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_change_state), (gst_base_transform_update_qos),
(gst_base_transform_set_qos_enabled),
(gst_base_transform_is_qos_enabled):
* libs/gst/base/gstbasetransform.h:
Make basetransform virtual method for src events too.
Handle QOS in basetransform.
API: gst_base_transform_update_qos
API: gst_base_transform_set_qos_enabled
API: gst_base_transform_is_qos_enabled
2006-03-13 11:27:57 +00:00
|
|
|
case PROP_QOS:
|
|
|
|
g_value_set_boolean (value, gst_base_transform_is_qos_enabled (trans));
|
|
|
|
break;
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
default:
|
|
|
|
G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static gboolean
|
gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any remaining buffer.
Original commit message from CVS:
2005-06-27 Andy Wingo <wingo@pobox.com>
* gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any
remaining buffer.
* gst/gsttrace.c (gst_alloc_trace_list_sorted): New helper,
returns a sorted copy of the trace list.
(gst_alloc_trace_print_live): New API, only prints traces with
live objects. Sort the list.
(gst_alloc_trace_print_all): Sort the list.
(gst_alloc_trace_print): Align columns.
* gst/elements/gstttypefindelement.c:
* gst/elements/gsttee.c:
* gst/base/gstbasesrc.c:
* gst/base/gstbasesink.c:
* gst/base/gstbasetransform.c:
* gst/gstqueue.c: Adapt for pad activation changes.
* gst/gstpipeline.c (gst_pipeline_init): Unref after parenting
sched.
(gst_pipeline_dispose): Drop ref on sched.
* gst/gstpad.c (gst_pad_init): Set the default activate func.
(gst_pad_activate_default): Push mode by default.
(pre_activate_switch, post_activate_switch): New stubs, things to
do before and after switching activation modes on pads.
(gst_pad_set_active): Take a boolean and not a mode, dispatch to
the pad's activate function to choose which mode to activate.
Shortcut on deactivation and call the right function directly.
(gst_pad_activate_pull): New API, (de)activates a pad in pull
mode.
(gst_pad_activate_push): New API, same for push mode.
(gst_pad_set_activate_function)
(gst_pad_set_activatepull_function)
(gst_pad_set_activatepush_function): Setters for new API.
* gst/gstminiobject.c (gst_mini_object_new, gst_mini_object_free):
Trace all miniobjects.
(gst_mini_object_make_writable): Unref the arg if we copy, like
gst_caps_make_writable.
* gst/gstmessage.c (_gst_message_initialize): No trace init.
* gst/gstghostpad.c (gst_proxy_pad_do_activate)
(gst_proxy_pad_do_activatepull, gst_proxy_pad_do_activatepush):
Adapt for new pad API.
* gst/gstevent.c (_gst_event_initialize): Don't initialize trace.
* gst/gstelement.h:
* gst/gstelement.c (gst_element_iterate_src_pads)
(gst_element_iterate_sink_pads): New API functions.
* gst/gstelement.c (iterator_fold_with_resync): New utility,
should fold into gstiterator.c in some form.
(gst_element_pads_activate): Simplified via use of fold and
delegation of decisions to gstpad->activate.
* gst/gstbus.c (gst_bus_source_finalize): Set the bus to NULL,
help in debugging.
* gst/gstbuffer.c (_gst_buffer_initialize): Ref the buffer type
class once in init, like gstmessage. Didn't run into this issue
but it seems correct. Don't initialize a trace, gstminiobject does
that.
* check/pipelines/simple_launch_lines.c (test_stop_from_app): New
test, runs fakesrc ! fakesink, stopping on ::handoff via a message
to the bus.
(assert_live_count): New util function, uses alloc traces to check
cleanup.
* check/gst/gstghostpad.c (test_ghost_pads): More refcount checks.
To be modified when unlink drops the internal pad.
2005-06-27 18:35:05 +00:00
|
|
|
gst_base_transform_sink_activate_push (GstPad * pad, gboolean active)
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
{
|
gst/: Added start/stop methods to transform base class so subclasses don't need to deal with state changes even.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_base_init),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_setcaps), (gst_base_transform_handle_buffer),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_start),
(gst_identity_stop):
Added start/stop methods to transform base class so subclasses
don't need to deal with state changes even.
2005-03-31 10:10:55 +00:00
|
|
|
gboolean result = TRUE;
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
GstBaseTransform *trans;
|
gst/: Added start/stop methods to transform base class so subclasses don't need to deal with state changes even.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_base_init),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_setcaps), (gst_base_transform_handle_buffer),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_start),
(gst_identity_stop):
Added start/stop methods to transform base class so subclasses
don't need to deal with state changes even.
2005-03-31 10:10:55 +00:00
|
|
|
GstBaseTransformClass *bclass;
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
|
docs/design/: Some more docs in the works.
Original commit message from CVS:
* docs/design/part-dynamic.txt:
* docs/design/part-events.txt:
* docs/design/part-seeking.txt:
Some more docs in the works.
* gst/base/gstbasetransform.c: (gst_base_transform_transform_caps),
(gst_base_transform_getcaps), (gst_base_transform_configure_caps),
(gst_base_transform_setcaps), (gst_base_transform_get_size),
(gst_base_transform_buffer_alloc), (gst_base_transform_event),
(gst_base_transform_handle_buffer),
(gst_base_transform_sink_activate_push),
(gst_base_transform_src_activate_pull),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
Refcounting fixes.
* gst/gstbus.c: (gst_bus_source_dispatch), (gst_bus_poll):
Cleanups.
* gst/gstevent.c: (gst_event_finalize):
Set SRC to NULL.
* gst/gstutils.c: (gst_element_unlink),
(gst_pad_get_parent_element), (gst_pad_proxy_getcaps),
(gst_pad_proxy_setcaps):
* gst/gstutils.h:
Add _get_parent_element() to get a pads parent as an element.
2005-07-18 08:28:48 +00:00
|
|
|
trans = GST_BASE_TRANSFORM (gst_pad_get_parent (pad));
|
gst/: Added start/stop methods to transform base class so subclasses don't need to deal with state changes even.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_base_init),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_setcaps), (gst_base_transform_handle_buffer),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_start),
(gst_identity_stop):
Added start/stop methods to transform base class so subclasses
don't need to deal with state changes even.
2005-03-31 10:10:55 +00:00
|
|
|
bclass = GST_BASE_TRANSFORM_GET_CLASS (trans);
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
|
gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any remaining buffer.
Original commit message from CVS:
2005-06-27 Andy Wingo <wingo@pobox.com>
* gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any
remaining buffer.
* gst/gsttrace.c (gst_alloc_trace_list_sorted): New helper,
returns a sorted copy of the trace list.
(gst_alloc_trace_print_live): New API, only prints traces with
live objects. Sort the list.
(gst_alloc_trace_print_all): Sort the list.
(gst_alloc_trace_print): Align columns.
* gst/elements/gstttypefindelement.c:
* gst/elements/gsttee.c:
* gst/base/gstbasesrc.c:
* gst/base/gstbasesink.c:
* gst/base/gstbasetransform.c:
* gst/gstqueue.c: Adapt for pad activation changes.
* gst/gstpipeline.c (gst_pipeline_init): Unref after parenting
sched.
(gst_pipeline_dispose): Drop ref on sched.
* gst/gstpad.c (gst_pad_init): Set the default activate func.
(gst_pad_activate_default): Push mode by default.
(pre_activate_switch, post_activate_switch): New stubs, things to
do before and after switching activation modes on pads.
(gst_pad_set_active): Take a boolean and not a mode, dispatch to
the pad's activate function to choose which mode to activate.
Shortcut on deactivation and call the right function directly.
(gst_pad_activate_pull): New API, (de)activates a pad in pull
mode.
(gst_pad_activate_push): New API, same for push mode.
(gst_pad_set_activate_function)
(gst_pad_set_activatepull_function)
(gst_pad_set_activatepush_function): Setters for new API.
* gst/gstminiobject.c (gst_mini_object_new, gst_mini_object_free):
Trace all miniobjects.
(gst_mini_object_make_writable): Unref the arg if we copy, like
gst_caps_make_writable.
* gst/gstmessage.c (_gst_message_initialize): No trace init.
* gst/gstghostpad.c (gst_proxy_pad_do_activate)
(gst_proxy_pad_do_activatepull, gst_proxy_pad_do_activatepush):
Adapt for new pad API.
* gst/gstevent.c (_gst_event_initialize): Don't initialize trace.
* gst/gstelement.h:
* gst/gstelement.c (gst_element_iterate_src_pads)
(gst_element_iterate_sink_pads): New API functions.
* gst/gstelement.c (iterator_fold_with_resync): New utility,
should fold into gstiterator.c in some form.
(gst_element_pads_activate): Simplified via use of fold and
delegation of decisions to gstpad->activate.
* gst/gstbus.c (gst_bus_source_finalize): Set the bus to NULL,
help in debugging.
* gst/gstbuffer.c (_gst_buffer_initialize): Ref the buffer type
class once in init, like gstmessage. Didn't run into this issue
but it seems correct. Don't initialize a trace, gstminiobject does
that.
* check/pipelines/simple_launch_lines.c (test_stop_from_app): New
test, runs fakesrc ! fakesink, stopping on ::handoff via a message
to the bus.
(assert_live_count): New util function, uses alloc traces to check
cleanup.
* check/gst/gstghostpad.c (test_ghost_pads): More refcount checks.
To be modified when unlink drops the internal pad.
2005-06-27 18:35:05 +00:00
|
|
|
if (active) {
|
|
|
|
if (bclass->start)
|
|
|
|
result = bclass->start (trans);
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
}
|
docs/design/: Some more docs in the works.
Original commit message from CVS:
* docs/design/part-dynamic.txt:
* docs/design/part-events.txt:
* docs/design/part-seeking.txt:
Some more docs in the works.
* gst/base/gstbasetransform.c: (gst_base_transform_transform_caps),
(gst_base_transform_getcaps), (gst_base_transform_configure_caps),
(gst_base_transform_setcaps), (gst_base_transform_get_size),
(gst_base_transform_buffer_alloc), (gst_base_transform_event),
(gst_base_transform_handle_buffer),
(gst_base_transform_sink_activate_push),
(gst_base_transform_src_activate_pull),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
Refcounting fixes.
* gst/gstbus.c: (gst_bus_source_dispatch), (gst_bus_poll):
Cleanups.
* gst/gstevent.c: (gst_event_finalize):
Set SRC to NULL.
* gst/gstutils.c: (gst_element_unlink),
(gst_pad_get_parent_element), (gst_pad_proxy_getcaps),
(gst_pad_proxy_setcaps):
* gst/gstutils.h:
Add _get_parent_element() to get a pads parent as an element.
2005-07-18 08:28:48 +00:00
|
|
|
gst_object_unref (trans);
|
gst/: Added start/stop methods to transform base class so subclasses don't need to deal with state changes even.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_base_init),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_setcaps), (gst_base_transform_handle_buffer),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_start),
(gst_identity_stop):
Added start/stop methods to transform base class so subclasses
don't need to deal with state changes even.
2005-03-31 10:10:55 +00:00
|
|
|
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
return result;
|
|
|
|
}
|
|
|
|
|
|
|
|
static gboolean
|
gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any remaining buffer.
Original commit message from CVS:
2005-06-27 Andy Wingo <wingo@pobox.com>
* gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any
remaining buffer.
* gst/gsttrace.c (gst_alloc_trace_list_sorted): New helper,
returns a sorted copy of the trace list.
(gst_alloc_trace_print_live): New API, only prints traces with
live objects. Sort the list.
(gst_alloc_trace_print_all): Sort the list.
(gst_alloc_trace_print): Align columns.
* gst/elements/gstttypefindelement.c:
* gst/elements/gsttee.c:
* gst/base/gstbasesrc.c:
* gst/base/gstbasesink.c:
* gst/base/gstbasetransform.c:
* gst/gstqueue.c: Adapt for pad activation changes.
* gst/gstpipeline.c (gst_pipeline_init): Unref after parenting
sched.
(gst_pipeline_dispose): Drop ref on sched.
* gst/gstpad.c (gst_pad_init): Set the default activate func.
(gst_pad_activate_default): Push mode by default.
(pre_activate_switch, post_activate_switch): New stubs, things to
do before and after switching activation modes on pads.
(gst_pad_set_active): Take a boolean and not a mode, dispatch to
the pad's activate function to choose which mode to activate.
Shortcut on deactivation and call the right function directly.
(gst_pad_activate_pull): New API, (de)activates a pad in pull
mode.
(gst_pad_activate_push): New API, same for push mode.
(gst_pad_set_activate_function)
(gst_pad_set_activatepull_function)
(gst_pad_set_activatepush_function): Setters for new API.
* gst/gstminiobject.c (gst_mini_object_new, gst_mini_object_free):
Trace all miniobjects.
(gst_mini_object_make_writable): Unref the arg if we copy, like
gst_caps_make_writable.
* gst/gstmessage.c (_gst_message_initialize): No trace init.
* gst/gstghostpad.c (gst_proxy_pad_do_activate)
(gst_proxy_pad_do_activatepull, gst_proxy_pad_do_activatepush):
Adapt for new pad API.
* gst/gstevent.c (_gst_event_initialize): Don't initialize trace.
* gst/gstelement.h:
* gst/gstelement.c (gst_element_iterate_src_pads)
(gst_element_iterate_sink_pads): New API functions.
* gst/gstelement.c (iterator_fold_with_resync): New utility,
should fold into gstiterator.c in some form.
(gst_element_pads_activate): Simplified via use of fold and
delegation of decisions to gstpad->activate.
* gst/gstbus.c (gst_bus_source_finalize): Set the bus to NULL,
help in debugging.
* gst/gstbuffer.c (_gst_buffer_initialize): Ref the buffer type
class once in init, like gstmessage. Didn't run into this issue
but it seems correct. Don't initialize a trace, gstminiobject does
that.
* check/pipelines/simple_launch_lines.c (test_stop_from_app): New
test, runs fakesrc ! fakesink, stopping on ::handoff via a message
to the bus.
(assert_live_count): New util function, uses alloc traces to check
cleanup.
* check/gst/gstghostpad.c (test_ghost_pads): More refcount checks.
To be modified when unlink drops the internal pad.
2005-06-27 18:35:05 +00:00
|
|
|
gst_base_transform_src_activate_pull (GstPad * pad, gboolean active)
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
{
|
|
|
|
gboolean result = FALSE;
|
|
|
|
GstBaseTransform *trans;
|
gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any remaining buffer.
Original commit message from CVS:
2005-06-27 Andy Wingo <wingo@pobox.com>
* gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any
remaining buffer.
* gst/gsttrace.c (gst_alloc_trace_list_sorted): New helper,
returns a sorted copy of the trace list.
(gst_alloc_trace_print_live): New API, only prints traces with
live objects. Sort the list.
(gst_alloc_trace_print_all): Sort the list.
(gst_alloc_trace_print): Align columns.
* gst/elements/gstttypefindelement.c:
* gst/elements/gsttee.c:
* gst/base/gstbasesrc.c:
* gst/base/gstbasesink.c:
* gst/base/gstbasetransform.c:
* gst/gstqueue.c: Adapt for pad activation changes.
* gst/gstpipeline.c (gst_pipeline_init): Unref after parenting
sched.
(gst_pipeline_dispose): Drop ref on sched.
* gst/gstpad.c (gst_pad_init): Set the default activate func.
(gst_pad_activate_default): Push mode by default.
(pre_activate_switch, post_activate_switch): New stubs, things to
do before and after switching activation modes on pads.
(gst_pad_set_active): Take a boolean and not a mode, dispatch to
the pad's activate function to choose which mode to activate.
Shortcut on deactivation and call the right function directly.
(gst_pad_activate_pull): New API, (de)activates a pad in pull
mode.
(gst_pad_activate_push): New API, same for push mode.
(gst_pad_set_activate_function)
(gst_pad_set_activatepull_function)
(gst_pad_set_activatepush_function): Setters for new API.
* gst/gstminiobject.c (gst_mini_object_new, gst_mini_object_free):
Trace all miniobjects.
(gst_mini_object_make_writable): Unref the arg if we copy, like
gst_caps_make_writable.
* gst/gstmessage.c (_gst_message_initialize): No trace init.
* gst/gstghostpad.c (gst_proxy_pad_do_activate)
(gst_proxy_pad_do_activatepull, gst_proxy_pad_do_activatepush):
Adapt for new pad API.
* gst/gstevent.c (_gst_event_initialize): Don't initialize trace.
* gst/gstelement.h:
* gst/gstelement.c (gst_element_iterate_src_pads)
(gst_element_iterate_sink_pads): New API functions.
* gst/gstelement.c (iterator_fold_with_resync): New utility,
should fold into gstiterator.c in some form.
(gst_element_pads_activate): Simplified via use of fold and
delegation of decisions to gstpad->activate.
* gst/gstbus.c (gst_bus_source_finalize): Set the bus to NULL,
help in debugging.
* gst/gstbuffer.c (_gst_buffer_initialize): Ref the buffer type
class once in init, like gstmessage. Didn't run into this issue
but it seems correct. Don't initialize a trace, gstminiobject does
that.
* check/pipelines/simple_launch_lines.c (test_stop_from_app): New
test, runs fakesrc ! fakesink, stopping on ::handoff via a message
to the bus.
(assert_live_count): New util function, uses alloc traces to check
cleanup.
* check/gst/gstghostpad.c (test_ghost_pads): More refcount checks.
To be modified when unlink drops the internal pad.
2005-06-27 18:35:05 +00:00
|
|
|
GstBaseTransformClass *bclass;
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
|
docs/design/: Some more docs in the works.
Original commit message from CVS:
* docs/design/part-dynamic.txt:
* docs/design/part-events.txt:
* docs/design/part-seeking.txt:
Some more docs in the works.
* gst/base/gstbasetransform.c: (gst_base_transform_transform_caps),
(gst_base_transform_getcaps), (gst_base_transform_configure_caps),
(gst_base_transform_setcaps), (gst_base_transform_get_size),
(gst_base_transform_buffer_alloc), (gst_base_transform_event),
(gst_base_transform_handle_buffer),
(gst_base_transform_sink_activate_push),
(gst_base_transform_src_activate_pull),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
Refcounting fixes.
* gst/gstbus.c: (gst_bus_source_dispatch), (gst_bus_poll):
Cleanups.
* gst/gstevent.c: (gst_event_finalize):
Set SRC to NULL.
* gst/gstutils.c: (gst_element_unlink),
(gst_pad_get_parent_element), (gst_pad_proxy_getcaps),
(gst_pad_proxy_setcaps):
* gst/gstutils.h:
Add _get_parent_element() to get a pads parent as an element.
2005-07-18 08:28:48 +00:00
|
|
|
trans = GST_BASE_TRANSFORM (gst_pad_get_parent (pad));
|
gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any remaining buffer.
Original commit message from CVS:
2005-06-27 Andy Wingo <wingo@pobox.com>
* gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any
remaining buffer.
* gst/gsttrace.c (gst_alloc_trace_list_sorted): New helper,
returns a sorted copy of the trace list.
(gst_alloc_trace_print_live): New API, only prints traces with
live objects. Sort the list.
(gst_alloc_trace_print_all): Sort the list.
(gst_alloc_trace_print): Align columns.
* gst/elements/gstttypefindelement.c:
* gst/elements/gsttee.c:
* gst/base/gstbasesrc.c:
* gst/base/gstbasesink.c:
* gst/base/gstbasetransform.c:
* gst/gstqueue.c: Adapt for pad activation changes.
* gst/gstpipeline.c (gst_pipeline_init): Unref after parenting
sched.
(gst_pipeline_dispose): Drop ref on sched.
* gst/gstpad.c (gst_pad_init): Set the default activate func.
(gst_pad_activate_default): Push mode by default.
(pre_activate_switch, post_activate_switch): New stubs, things to
do before and after switching activation modes on pads.
(gst_pad_set_active): Take a boolean and not a mode, dispatch to
the pad's activate function to choose which mode to activate.
Shortcut on deactivation and call the right function directly.
(gst_pad_activate_pull): New API, (de)activates a pad in pull
mode.
(gst_pad_activate_push): New API, same for push mode.
(gst_pad_set_activate_function)
(gst_pad_set_activatepull_function)
(gst_pad_set_activatepush_function): Setters for new API.
* gst/gstminiobject.c (gst_mini_object_new, gst_mini_object_free):
Trace all miniobjects.
(gst_mini_object_make_writable): Unref the arg if we copy, like
gst_caps_make_writable.
* gst/gstmessage.c (_gst_message_initialize): No trace init.
* gst/gstghostpad.c (gst_proxy_pad_do_activate)
(gst_proxy_pad_do_activatepull, gst_proxy_pad_do_activatepush):
Adapt for new pad API.
* gst/gstevent.c (_gst_event_initialize): Don't initialize trace.
* gst/gstelement.h:
* gst/gstelement.c (gst_element_iterate_src_pads)
(gst_element_iterate_sink_pads): New API functions.
* gst/gstelement.c (iterator_fold_with_resync): New utility,
should fold into gstiterator.c in some form.
(gst_element_pads_activate): Simplified via use of fold and
delegation of decisions to gstpad->activate.
* gst/gstbus.c (gst_bus_source_finalize): Set the bus to NULL,
help in debugging.
* gst/gstbuffer.c (_gst_buffer_initialize): Ref the buffer type
class once in init, like gstmessage. Didn't run into this issue
but it seems correct. Don't initialize a trace, gstminiobject does
that.
* check/pipelines/simple_launch_lines.c (test_stop_from_app): New
test, runs fakesrc ! fakesink, stopping on ::handoff via a message
to the bus.
(assert_live_count): New util function, uses alloc traces to check
cleanup.
* check/gst/gstghostpad.c (test_ghost_pads): More refcount checks.
To be modified when unlink drops the internal pad.
2005-06-27 18:35:05 +00:00
|
|
|
bclass = GST_BASE_TRANSFORM_GET_CLASS (trans);
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
|
gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any remaining buffer.
Original commit message from CVS:
2005-06-27 Andy Wingo <wingo@pobox.com>
* gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any
remaining buffer.
* gst/gsttrace.c (gst_alloc_trace_list_sorted): New helper,
returns a sorted copy of the trace list.
(gst_alloc_trace_print_live): New API, only prints traces with
live objects. Sort the list.
(gst_alloc_trace_print_all): Sort the list.
(gst_alloc_trace_print): Align columns.
* gst/elements/gstttypefindelement.c:
* gst/elements/gsttee.c:
* gst/base/gstbasesrc.c:
* gst/base/gstbasesink.c:
* gst/base/gstbasetransform.c:
* gst/gstqueue.c: Adapt for pad activation changes.
* gst/gstpipeline.c (gst_pipeline_init): Unref after parenting
sched.
(gst_pipeline_dispose): Drop ref on sched.
* gst/gstpad.c (gst_pad_init): Set the default activate func.
(gst_pad_activate_default): Push mode by default.
(pre_activate_switch, post_activate_switch): New stubs, things to
do before and after switching activation modes on pads.
(gst_pad_set_active): Take a boolean and not a mode, dispatch to
the pad's activate function to choose which mode to activate.
Shortcut on deactivation and call the right function directly.
(gst_pad_activate_pull): New API, (de)activates a pad in pull
mode.
(gst_pad_activate_push): New API, same for push mode.
(gst_pad_set_activate_function)
(gst_pad_set_activatepull_function)
(gst_pad_set_activatepush_function): Setters for new API.
* gst/gstminiobject.c (gst_mini_object_new, gst_mini_object_free):
Trace all miniobjects.
(gst_mini_object_make_writable): Unref the arg if we copy, like
gst_caps_make_writable.
* gst/gstmessage.c (_gst_message_initialize): No trace init.
* gst/gstghostpad.c (gst_proxy_pad_do_activate)
(gst_proxy_pad_do_activatepull, gst_proxy_pad_do_activatepush):
Adapt for new pad API.
* gst/gstevent.c (_gst_event_initialize): Don't initialize trace.
* gst/gstelement.h:
* gst/gstelement.c (gst_element_iterate_src_pads)
(gst_element_iterate_sink_pads): New API functions.
* gst/gstelement.c (iterator_fold_with_resync): New utility,
should fold into gstiterator.c in some form.
(gst_element_pads_activate): Simplified via use of fold and
delegation of decisions to gstpad->activate.
* gst/gstbus.c (gst_bus_source_finalize): Set the bus to NULL,
help in debugging.
* gst/gstbuffer.c (_gst_buffer_initialize): Ref the buffer type
class once in init, like gstmessage. Didn't run into this issue
but it seems correct. Don't initialize a trace, gstminiobject does
that.
* check/pipelines/simple_launch_lines.c (test_stop_from_app): New
test, runs fakesrc ! fakesink, stopping on ::handoff via a message
to the bus.
(assert_live_count): New util function, uses alloc traces to check
cleanup.
* check/gst/gstghostpad.c (test_ghost_pads): More refcount checks.
To be modified when unlink drops the internal pad.
2005-06-27 18:35:05 +00:00
|
|
|
result = gst_pad_activate_pull (trans->sinkpad, active);
|
|
|
|
|
|
|
|
if (active) {
|
|
|
|
if (result && bclass->start)
|
|
|
|
result &= bclass->start (trans);
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
}
|
docs/design/: Some more docs in the works.
Original commit message from CVS:
* docs/design/part-dynamic.txt:
* docs/design/part-events.txt:
* docs/design/part-seeking.txt:
Some more docs in the works.
* gst/base/gstbasetransform.c: (gst_base_transform_transform_caps),
(gst_base_transform_getcaps), (gst_base_transform_configure_caps),
(gst_base_transform_setcaps), (gst_base_transform_get_size),
(gst_base_transform_buffer_alloc), (gst_base_transform_event),
(gst_base_transform_handle_buffer),
(gst_base_transform_sink_activate_push),
(gst_base_transform_src_activate_pull),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
Refcounting fixes.
* gst/gstbus.c: (gst_bus_source_dispatch), (gst_bus_poll):
Cleanups.
* gst/gstevent.c: (gst_event_finalize):
Set SRC to NULL.
* gst/gstutils.c: (gst_element_unlink),
(gst_pad_get_parent_element), (gst_pad_proxy_getcaps),
(gst_pad_proxy_setcaps):
* gst/gstutils.h:
Add _get_parent_element() to get a pads parent as an element.
2005-07-18 08:28:48 +00:00
|
|
|
gst_object_unref (trans);
|
gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any remaining buffer.
Original commit message from CVS:
2005-06-27 Andy Wingo <wingo@pobox.com>
* gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any
remaining buffer.
* gst/gsttrace.c (gst_alloc_trace_list_sorted): New helper,
returns a sorted copy of the trace list.
(gst_alloc_trace_print_live): New API, only prints traces with
live objects. Sort the list.
(gst_alloc_trace_print_all): Sort the list.
(gst_alloc_trace_print): Align columns.
* gst/elements/gstttypefindelement.c:
* gst/elements/gsttee.c:
* gst/base/gstbasesrc.c:
* gst/base/gstbasesink.c:
* gst/base/gstbasetransform.c:
* gst/gstqueue.c: Adapt for pad activation changes.
* gst/gstpipeline.c (gst_pipeline_init): Unref after parenting
sched.
(gst_pipeline_dispose): Drop ref on sched.
* gst/gstpad.c (gst_pad_init): Set the default activate func.
(gst_pad_activate_default): Push mode by default.
(pre_activate_switch, post_activate_switch): New stubs, things to
do before and after switching activation modes on pads.
(gst_pad_set_active): Take a boolean and not a mode, dispatch to
the pad's activate function to choose which mode to activate.
Shortcut on deactivation and call the right function directly.
(gst_pad_activate_pull): New API, (de)activates a pad in pull
mode.
(gst_pad_activate_push): New API, same for push mode.
(gst_pad_set_activate_function)
(gst_pad_set_activatepull_function)
(gst_pad_set_activatepush_function): Setters for new API.
* gst/gstminiobject.c (gst_mini_object_new, gst_mini_object_free):
Trace all miniobjects.
(gst_mini_object_make_writable): Unref the arg if we copy, like
gst_caps_make_writable.
* gst/gstmessage.c (_gst_message_initialize): No trace init.
* gst/gstghostpad.c (gst_proxy_pad_do_activate)
(gst_proxy_pad_do_activatepull, gst_proxy_pad_do_activatepush):
Adapt for new pad API.
* gst/gstevent.c (_gst_event_initialize): Don't initialize trace.
* gst/gstelement.h:
* gst/gstelement.c (gst_element_iterate_src_pads)
(gst_element_iterate_sink_pads): New API functions.
* gst/gstelement.c (iterator_fold_with_resync): New utility,
should fold into gstiterator.c in some form.
(gst_element_pads_activate): Simplified via use of fold and
delegation of decisions to gstpad->activate.
* gst/gstbus.c (gst_bus_source_finalize): Set the bus to NULL,
help in debugging.
* gst/gstbuffer.c (_gst_buffer_initialize): Ref the buffer type
class once in init, like gstmessage. Didn't run into this issue
but it seems correct. Don't initialize a trace, gstminiobject does
that.
* check/pipelines/simple_launch_lines.c (test_stop_from_app): New
test, runs fakesrc ! fakesink, stopping on ::handoff via a message
to the bus.
(assert_live_count): New util function, uses alloc traces to check
cleanup.
* check/gst/gstghostpad.c (test_ghost_pads): More refcount checks.
To be modified when unlink drops the internal pad.
2005-06-27 18:35:05 +00:00
|
|
|
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
return result;
|
|
|
|
}
|
|
|
|
|
2005-09-02 15:42:00 +00:00
|
|
|
static GstStateChangeReturn
|
|
|
|
gst_base_transform_change_state (GstElement * element,
|
|
|
|
GstStateChange transition)
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
{
|
|
|
|
GstBaseTransform *trans;
|
gst/: Added start/stop methods to transform base class so subclasses don't need to deal with state changes even.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_base_init),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_setcaps), (gst_base_transform_handle_buffer),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_start),
(gst_identity_stop):
Added start/stop methods to transform base class so subclasses
don't need to deal with state changes even.
2005-03-31 10:10:55 +00:00
|
|
|
GstBaseTransformClass *bclass;
|
2005-09-02 15:42:00 +00:00
|
|
|
GstStateChangeReturn result;
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
|
|
|
|
trans = GST_BASE_TRANSFORM (element);
|
gst/: Added start/stop methods to transform base class so subclasses don't need to deal with state changes even.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_base_init),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_setcaps), (gst_base_transform_handle_buffer),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_start),
(gst_identity_stop):
Added start/stop methods to transform base class so subclasses
don't need to deal with state changes even.
2005-03-31 10:10:55 +00:00
|
|
|
bclass = GST_BASE_TRANSFORM_GET_CLASS (trans);
|
|
|
|
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
|
|
|
|
switch (transition) {
|
2005-09-02 15:42:00 +00:00
|
|
|
case GST_STATE_CHANGE_NULL_TO_READY:
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
break;
|
2005-09-02 15:42:00 +00:00
|
|
|
case GST_STATE_CHANGE_READY_TO_PAUSED:
|
2005-11-21 16:34:26 +00:00
|
|
|
GST_OBJECT_LOCK (trans);
|
2005-08-01 17:26:00 +00:00
|
|
|
if (GST_PAD_CAPS (trans->sinkpad) && GST_PAD_CAPS (trans->srcpad))
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
trans->have_same_caps =
|
|
|
|
gst_caps_is_equal (GST_PAD_CAPS (trans->sinkpad),
|
2005-08-01 17:26:00 +00:00
|
|
|
GST_PAD_CAPS (trans->srcpad)) || trans->passthrough;
|
|
|
|
else
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
trans->have_same_caps = trans->passthrough;
|
|
|
|
GST_DEBUG_OBJECT (trans, "have_same_caps %d", trans->have_same_caps);
|
2005-08-31 13:41:19 +00:00
|
|
|
trans->negotiated = FALSE;
|
2005-11-15 17:18:10 +00:00
|
|
|
trans->have_newsegment = FALSE;
|
More segment updates, replace code in plugins with segment helper functions.
Original commit message from CVS:
* check/gst/gstsegment.c: (GST_START_TEST):
* docs/design/part-TODO.txt:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_event), (gst_base_sink_do_sync),
(gst_base_sink_activate_pull), (gst_base_sink_get_position),
(gst_base_sink_query), (gst_base_sink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasesrc.c: (gst_base_src_init), (gst_base_src_query),
(gst_base_src_default_newsegment),
(gst_base_src_configure_segment), (gst_base_src_do_seek),
(gst_base_src_get_range), (gst_base_src_loop),
(gst_base_src_change_state):
* gst/base/gstbasesrc.h:
* gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf),
(gst_base_transform_event), (gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/base/gstcollectpads.c: (gst_collect_pads_add_pad),
(gst_collect_pads_event):
* gst/base/gstcollectpads.h:
* gst/elements/gstfakesrc.c: (gst_fake_src_init),
(gst_fake_src_create):
* gst/elements/gstfakesrc.h:
* gst/elements/gstidentity.c: (gst_identity_transform_ip):
* gst/gstsegment.c: (gst_segment_init), (gst_segment_set_duration),
(gst_segment_set_last_stop), (gst_segment_set_seek),
(gst_segment_set_newsegment), (gst_segment_to_stream_time),
(gst_segment_to_running_time), (gst_segment_clip):
* gst/gstsegment.h:
More segment updates, replace code in plugins with segment
helper functions.
2005-11-21 17:09:45 +00:00
|
|
|
gst_segment_init (&trans->segment, GST_FORMAT_UNDEFINED);
|
libs/gst/base/gstbasetransform.*: Make basetransform virtual method for src events too.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_sink_event),
(gst_base_transform_sink_eventfunc),
(gst_base_transform_src_event), (gst_base_transform_src_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_change_state), (gst_base_transform_update_qos),
(gst_base_transform_set_qos_enabled),
(gst_base_transform_is_qos_enabled):
* libs/gst/base/gstbasetransform.h:
Make basetransform virtual method for src events too.
Handle QOS in basetransform.
API: gst_base_transform_update_qos
API: gst_base_transform_set_qos_enabled
API: gst_base_transform_is_qos_enabled
2006-03-13 11:27:57 +00:00
|
|
|
trans->priv->proportion = 1.0;
|
|
|
|
trans->priv->earliest_time = -1;
|
2005-11-21 16:34:26 +00:00
|
|
|
GST_OBJECT_UNLOCK (trans);
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
break;
|
2005-09-02 15:42:00 +00:00
|
|
|
case GST_STATE_CHANGE_PAUSED_TO_PLAYING:
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2005-09-02 15:42:00 +00:00
|
|
|
result = GST_ELEMENT_CLASS (parent_class)->change_state (element, transition);
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
|
|
|
|
switch (transition) {
|
2005-09-02 15:42:00 +00:00
|
|
|
case GST_STATE_CHANGE_PLAYING_TO_PAUSED:
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
break;
|
2005-09-02 15:42:00 +00:00
|
|
|
case GST_STATE_CHANGE_PAUSED_TO_READY:
|
libs/gst/base/gstbasetransform.c: Cleanups, separate normal flow from errors, add sensible
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_transform_caps),
(gst_base_transform_transform_size),
(gst_base_transform_prepare_output_buffer),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer),
(gst_base_transform_change_state):
Cleanups, separate normal flow from errors, add sensible
DEBUG lines.
Don't try to renegotiate when allocating an output buffer.
Also copy DISCONT buffer flag when copying a buffer.
Reset the transform after we finish streaming, not during.
2006-03-08 10:17:41 +00:00
|
|
|
trans->have_same_caps = FALSE;
|
|
|
|
/* We can only reset the passthrough mode if the instance told us to
|
|
|
|
handle it in configure_caps */
|
|
|
|
if (bclass->passthrough_on_same_caps) {
|
|
|
|
gst_base_transform_set_passthrough (trans, FALSE);
|
|
|
|
}
|
|
|
|
gst_caps_replace (&trans->cache_caps1, NULL);
|
|
|
|
gst_caps_replace (&trans->cache_caps2, NULL);
|
gst/: Added start/stop methods to transform base class so subclasses don't need to deal with state changes even.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_base_init),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_setcaps), (gst_base_transform_handle_buffer),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_start),
(gst_identity_stop):
Added start/stop methods to transform base class so subclasses
don't need to deal with state changes even.
2005-03-31 10:10:55 +00:00
|
|
|
if (bclass->stop)
|
|
|
|
result = bclass->stop (trans);
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
break;
|
2005-09-02 15:42:00 +00:00
|
|
|
case GST_STATE_CHANGE_READY_TO_NULL:
|
gst/: Simplify pad activation.
Original commit message from CVS:
* gst/base/Makefile.am:
* gst/base/README:
* gst/base/gstbasesink.c: (gst_basesink_get_type),
(gst_basesink_base_init), (gst_basesink_class_init),
(gst_basesink_pad_getcaps), (gst_basesink_init),
(gst_basesink_activate), (gst_basesink_change_state):
* gst/base/gstbasesink.h:
* gst/base/gstbasetransform.c: (gst_base_transform_get_type),
(gst_base_transform_base_init), (gst_base_transform_finalize),
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_proxy_getcaps), (gst_base_transform_setcaps),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_handle_buffer),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_sink_activate),
(gst_base_transform_src_activate),
(gst_base_transform_change_state):
* gst/base/gstbasetransform.h:
* gst/elements/gstidentity.c: (gst_identity_finalize),
(gst_identity_class_init), (gst_identity_init),
(gst_identity_event), (gst_identity_check_perfect),
(gst_identity_transform), (gst_identity_set_property),
(gst_identity_get_property), (gst_identity_change_state):
* gst/elements/gstidentity.h:
* gst/gstelement.c: (gst_element_get_state_func),
(gst_element_lost_state), (gst_element_pads_activate):
* gst/gstpad.c: (gst_pad_set_active), (gst_pad_peer_set_active),
(gst_pad_check_pull_range), (gst_pad_pull_range):
* gst/gstpad.h:
Simplify pad activation.
Added function to check if pull_range can be performed.
Error out when pulling inactive or flushing pads.
Removed const from refcounted types as it does not make sense.
Simplify pad templates in basesink
Added base class for simple 1-to-1 transforms.
Make identity subclass the base transform.
2005-03-29 16:18:12 +00:00
|
|
|
break;
|
|
|
|
default:
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
return result;
|
|
|
|
}
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
|
|
|
|
/**
|
|
|
|
* gst_base_transform_set_passthrough:
|
|
|
|
* @trans: the #GstBaseTransform to set
|
|
|
|
* @passthrough: boolean indicating passthrough mode.
|
|
|
|
*
|
|
|
|
* Set passthrough mode for this filter by default. This is mostly
|
2005-10-15 15:30:24 +00:00
|
|
|
* useful for filters that do not care about negotiation.
|
|
|
|
*
|
|
|
|
* Always TRUE for filters which don't implement either a transform
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
* or transform_ip method.
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
*
|
|
|
|
* MT safe.
|
|
|
|
*/
|
|
|
|
void
|
|
|
|
gst_base_transform_set_passthrough (GstBaseTransform * trans,
|
|
|
|
gboolean passthrough)
|
|
|
|
{
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
GstBaseTransformClass *bclass;
|
|
|
|
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
g_return_if_fail (trans != NULL);
|
|
|
|
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
bclass = GST_BASE_TRANSFORM_GET_CLASS (trans);
|
2005-08-30 19:29:59 +00:00
|
|
|
|
2005-11-21 16:34:26 +00:00
|
|
|
GST_OBJECT_LOCK (trans);
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
if (passthrough == FALSE) {
|
|
|
|
if (bclass->transform_ip || bclass->transform)
|
|
|
|
trans->passthrough = FALSE;
|
|
|
|
} else {
|
|
|
|
trans->passthrough = TRUE;
|
|
|
|
}
|
|
|
|
|
|
|
|
GST_DEBUG_OBJECT (trans, "set passthrough %d", trans->passthrough);
|
2005-11-21 16:34:26 +00:00
|
|
|
GST_OBJECT_UNLOCK (trans);
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* gst_base_transform_is_passthrough:
|
|
|
|
* @trans: the #GstBaseTransform to query
|
|
|
|
*
|
|
|
|
* See if @trans is configured as a passthrough transform.
|
|
|
|
*
|
|
|
|
* Returns: TRUE is the transform is configured in passthrough mode.
|
|
|
|
*
|
|
|
|
* MT safe.
|
|
|
|
*/
|
|
|
|
gboolean
|
|
|
|
gst_base_transform_is_passthrough (GstBaseTransform * trans)
|
|
|
|
{
|
|
|
|
gboolean result;
|
|
|
|
|
|
|
|
g_return_val_if_fail (trans != NULL, FALSE);
|
|
|
|
|
2005-11-21 16:34:26 +00:00
|
|
|
GST_OBJECT_LOCK (trans);
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
result = trans->passthrough;
|
2005-11-21 16:34:26 +00:00
|
|
|
GST_OBJECT_UNLOCK (trans);
|
gst/base/gstbasetransform.*: Make passthrough work using the bufferpools.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_transform_caps), (gst_base_transform_getcaps),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_get_size), (gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_getrange),
(gst_base_transform_chain), (gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_is_passthrough):
* gst/base/gstbasetransform.h:
Make passthrough work using the bufferpools.
Changed API a bit, subclasses have to write into a buffer
provided by the base class.
More debug info in nego functions.
* gst/elements/gstidentity.c: (gst_identity_init),
(gst_identity_transform):
Port to new base class.
2005-07-15 10:41:32 +00:00
|
|
|
|
|
|
|
return result;
|
|
|
|
}
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
|
|
|
|
/**
|
|
|
|
* gst_base_transform_set_in_place:
|
|
|
|
* @trans: the #GstBaseTransform to modify
|
|
|
|
* @in_place: Boolean value indicating that we would like to operate
|
|
|
|
* on in_place buffers.
|
|
|
|
*
|
2005-10-15 15:30:24 +00:00
|
|
|
* Determines whether a non-writable buffer will be copied before passing
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
* to the transform_ip function.
|
|
|
|
* <itemizedlist>
|
|
|
|
* <listitem>Always TRUE if no transform function is implemented.</listitem>
|
|
|
|
* <listitem>Always FALSE if ONLY transform_ip function is implemented.</listitem>
|
|
|
|
* </itemizedlist>
|
|
|
|
*
|
|
|
|
* MT safe.
|
|
|
|
*/
|
|
|
|
void
|
|
|
|
gst_base_transform_set_in_place (GstBaseTransform * trans, gboolean in_place)
|
|
|
|
{
|
|
|
|
GstBaseTransformClass *bclass;
|
|
|
|
|
|
|
|
g_return_if_fail (trans != NULL);
|
|
|
|
|
|
|
|
bclass = GST_BASE_TRANSFORM_GET_CLASS (trans);
|
|
|
|
|
2005-11-21 16:34:26 +00:00
|
|
|
GST_OBJECT_LOCK (trans);
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
|
|
|
|
if (in_place) {
|
|
|
|
if (bclass->transform_ip) {
|
|
|
|
GST_DEBUG_OBJECT (trans, "setting in_place TRUE");
|
|
|
|
trans->always_in_place = TRUE;
|
|
|
|
}
|
|
|
|
} else {
|
|
|
|
if (bclass->transform) {
|
|
|
|
GST_DEBUG_OBJECT (trans, "setting in_place FALSE");
|
|
|
|
trans->always_in_place = FALSE;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2005-11-21 16:34:26 +00:00
|
|
|
GST_OBJECT_UNLOCK (trans);
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* gst_base_transform_is_in_place:
|
|
|
|
* @trans: the #GstBaseTransform to query
|
|
|
|
*
|
|
|
|
* See if @trans is configured as a in_place transform.
|
|
|
|
*
|
|
|
|
* Returns: TRUE is the transform is configured in in_place mode.
|
|
|
|
*
|
|
|
|
* MT safe.
|
|
|
|
*/
|
|
|
|
gboolean
|
|
|
|
gst_base_transform_is_in_place (GstBaseTransform * trans)
|
|
|
|
{
|
|
|
|
gboolean result;
|
|
|
|
|
|
|
|
g_return_val_if_fail (trans != NULL, FALSE);
|
|
|
|
|
2005-11-21 16:34:26 +00:00
|
|
|
GST_OBJECT_LOCK (trans);
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
result = trans->always_in_place;
|
2005-11-21 16:34:26 +00:00
|
|
|
GST_OBJECT_UNLOCK (trans);
|
check/elements/identity.c: Make the error a little clearer when the test fails because identity made a copy of the bu...
Original commit message from CVS:
* check/elements/identity.c: (GST_START_TEST):
Make the error a little clearer when the test fails because
identity made a copy of the buffer.
* docs/gst/gstreamer-sections.txt:
New symbols in gstbasetransform.h
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init), (gst_base_transform_transform_size),
(gst_base_transform_configure_caps), (gst_base_transform_setcaps),
(gst_base_transform_default_prepare_buf),
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_change_state),
(gst_base_transform_set_passthrough),
(gst_base_transform_set_in_place),
(gst_base_transform_is_in_place):
* gst/base/gstbasetransform.h:
Change BaseTransform to separate in_place operate from same_caps
output. in_place implies that the element can perform the transform
on incoming buffers in-place, even if the caps on the output are
different.
Sub-class elements can now implement special buffer allocation
methods for outgoing buffers if they wish to.
Big documentation addition.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_transform_ip):
* gst/elements/gstelements.c:
Changes for basetransform modifications.
* gst/elements/Makefile.am:
* gst/elements/gstfdsrc.c: (gst_fdsrc_init), (gst_fdsrc_create):
Compile fix. Extra debug output.
2005-09-09 17:42:20 +00:00
|
|
|
|
|
|
|
return result;
|
|
|
|
}
|
libs/gst/base/gstbasetransform.*: Make basetransform virtual method for src events too.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_class_init), (gst_base_transform_init),
(gst_base_transform_sink_event),
(gst_base_transform_sink_eventfunc),
(gst_base_transform_src_event), (gst_base_transform_src_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_set_property),
(gst_base_transform_get_property),
(gst_base_transform_change_state), (gst_base_transform_update_qos),
(gst_base_transform_set_qos_enabled),
(gst_base_transform_is_qos_enabled):
* libs/gst/base/gstbasetransform.h:
Make basetransform virtual method for src events too.
Handle QOS in basetransform.
API: gst_base_transform_update_qos
API: gst_base_transform_set_qos_enabled
API: gst_base_transform_is_qos_enabled
2006-03-13 11:27:57 +00:00
|
|
|
|
|
|
|
/**
|
|
|
|
* gst_base_transform_update_qos:
|
|
|
|
* @trans: a #GstBaseTransform
|
|
|
|
* @proportion: the proportion
|
|
|
|
* @diff: the diff against the clock
|
|
|
|
* @timestamp: the timestamp of the buffer generating the QoS
|
|
|
|
*
|
|
|
|
* Set the QoS parameters in the transform.
|
|
|
|
*
|
|
|
|
* Since: 0.10.5
|
|
|
|
*
|
|
|
|
* MT safe.
|
|
|
|
*/
|
|
|
|
void
|
|
|
|
gst_base_transform_update_qos (GstBaseTransform * trans,
|
|
|
|
gdouble proportion, GstClockTimeDiff diff, GstClockTime timestamp)
|
|
|
|
{
|
|
|
|
|
|
|
|
g_return_if_fail (trans != NULL);
|
|
|
|
|
|
|
|
GST_CAT_DEBUG_OBJECT (GST_CAT_QOS, trans,
|
|
|
|
"qos: proportion: %lf, diff %" G_GINT64_FORMAT ", timestamp %"
|
|
|
|
GST_TIME_FORMAT, proportion, diff, GST_TIME_ARGS (timestamp));
|
|
|
|
|
|
|
|
GST_OBJECT_LOCK (trans);
|
|
|
|
trans->priv->proportion = proportion;
|
|
|
|
trans->priv->earliest_time = timestamp + diff;
|
|
|
|
GST_OBJECT_UNLOCK (trans);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* gst_base_transform_set_qos_enabled:
|
|
|
|
* @trans: a #GstBaseTransform
|
|
|
|
* @enabled: new state
|
|
|
|
*
|
|
|
|
* Enable or disable QoS handling in the transform.
|
|
|
|
*
|
|
|
|
* Since: 0.10.5
|
|
|
|
*
|
|
|
|
* MT safe.
|
|
|
|
*/
|
|
|
|
void
|
|
|
|
gst_base_transform_set_qos_enabled (GstBaseTransform * trans, gboolean enabled)
|
|
|
|
{
|
|
|
|
g_return_if_fail (trans != NULL);
|
|
|
|
|
|
|
|
GST_CAT_DEBUG_OBJECT (GST_CAT_QOS, trans, "enabled: %d", enabled);
|
|
|
|
|
|
|
|
GST_OBJECT_LOCK (trans);
|
|
|
|
trans->priv->qos_enabled = enabled;
|
|
|
|
GST_OBJECT_UNLOCK (trans);
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* gst_base_transform_is_qos_enabled:
|
|
|
|
* @trans: a #GstBaseTransform
|
|
|
|
*
|
|
|
|
* Queries if the transform will handle QoS.
|
|
|
|
*
|
|
|
|
* Returns: TRUE if QoS is enabled.
|
|
|
|
*
|
|
|
|
* Since: 0.10.5
|
|
|
|
*
|
|
|
|
* MT safe.
|
|
|
|
*/
|
|
|
|
gboolean
|
|
|
|
gst_base_transform_is_qos_enabled (GstBaseTransform * trans)
|
|
|
|
{
|
|
|
|
gboolean result;
|
|
|
|
|
|
|
|
g_return_val_if_fail (trans != NULL, FALSE);
|
|
|
|
|
|
|
|
GST_OBJECT_LOCK (trans);
|
|
|
|
result = trans->priv->qos_enabled;
|
|
|
|
GST_OBJECT_UNLOCK (trans);
|
|
|
|
|
|
|
|
return result;
|
|
|
|
}
|