gstreamer/gst/videoparsers/gsth264parse.c

2269 lines
71 KiB
C
Raw Normal View History

/* GStreamer H.264 Parser
* Copyright (C) <2010> Collabora ltd
* Copyright (C) <2010> Nokia Corporation
* Copyright (C) <2011> Intel Corporation
*
* Copyright (C) <2010> Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk>
* Copyright (C) <2011> Thibault Saunier <thibault.saunier@collabora.com>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the
* Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
* Boston, MA 02110-1301, USA.
*/
#ifdef HAVE_CONFIG_H
# include "config.h"
#endif
2013-12-16 09:18:23 +00:00
#include <gst/base/base.h>
#include <gst/pbutils/pbutils.h>
#include <gst/video/video.h>
#include "gsth264parse.h"
#include <string.h>
GST_DEBUG_CATEGORY (h264_parse_debug);
#define GST_CAT_DEFAULT h264_parse_debug
#define DEFAULT_CONFIG_INTERVAL (0)
enum
{
PROP_0,
PROP_CONFIG_INTERVAL,
PROP_LAST
};
enum
{
GST_H264_PARSE_FORMAT_NONE,
GST_H264_PARSE_FORMAT_AVC,
h264parse: Add support for stream-format=avc3 When outputting in AVC3 stream format, the codec_data should not contain any SPS or PPS, because they are embedded inside the stream. In case of avc->bytestream h264parse will push the SPS and PPS from codec_data downstream at the start of the stream, at intervals controlled by "config-interval" and when there is a codec_data change. In the case of avc3->bytstream h264parse detects that there is already SPS/PPS in the stream and sets h264parse->push_codec to FALSE. Therefore avc3->bytstream was already supported, except for the stream type. In the case of bystream->avc h264parse will generate codec_data caps from the parsed SPS/PPS in the stream. However it does not remove these SPS/PPS from the stream. bytestream->avc3 is the same as bytestream->avc except that the codec_data must not have any SPS/PPS in it. |--------------+-------------+-------------------| |stream-format | SPS in-band | SPS in codec_data | |--------------+-------------+-------------------| | avc | maybe | always | |--------------+-------------+-------------------| | avc3 | always | never | |--------------+-------------+-------------------| Amendment 2 of ISO/IEC 14496-15 (AVC file format) is defining a new structure for fragmented MP4 called "avc3". The principal difference between AVC1 and AVC3 is the location of the codec initialisation data (e.g. SPS, PPS). In AVC1 this data is placed in the initial MOOV box (moov.trak.mdia.minf.stbl.stsd.avc1) but in AVC3 this data goes in the first sample of every fragment. https://bugzilla.gnome.org/show_bug.cgi?id=702004
2013-08-30 12:54:40 +00:00
GST_H264_PARSE_FORMAT_BYTE,
GST_H264_PARSE_FORMAT_AVC3
};
enum
{
GST_H264_PARSE_ALIGN_NONE = 0,
GST_H264_PARSE_ALIGN_NAL,
GST_H264_PARSE_ALIGN_AU
};
enum
{
GST_H264_PARSE_STATE_GOT_SPS = 1 << 0,
GST_H264_PARSE_STATE_GOT_PPS = 1 << 1,
GST_H264_PARSE_STATE_GOT_SLICE = 1 << 2,
GST_H264_PARSE_STATE_VALID_PICTURE_HEADERS = (GST_H264_PARSE_STATE_GOT_SPS |
GST_H264_PARSE_STATE_GOT_PPS),
GST_H264_PARSE_STATE_VALID_PICTURE =
(GST_H264_PARSE_STATE_VALID_PICTURE_HEADERS |
GST_H264_PARSE_STATE_GOT_SLICE)
};
#define GST_H264_PARSE_STATE_VALID(parse, expected_state) \
(((parse)->state & (expected_state)) == (expected_state))
static GstStaticPadTemplate sinktemplate = GST_STATIC_PAD_TEMPLATE ("sink",
GST_PAD_SINK,
GST_PAD_ALWAYS,
GST_STATIC_CAPS ("video/x-h264"));
static GstStaticPadTemplate srctemplate = GST_STATIC_PAD_TEMPLATE ("src",
GST_PAD_SRC,
GST_PAD_ALWAYS,
GST_STATIC_CAPS ("video/x-h264, parsed = (boolean) true, "
h264parse: Add support for stream-format=avc3 When outputting in AVC3 stream format, the codec_data should not contain any SPS or PPS, because they are embedded inside the stream. In case of avc->bytestream h264parse will push the SPS and PPS from codec_data downstream at the start of the stream, at intervals controlled by "config-interval" and when there is a codec_data change. In the case of avc3->bytstream h264parse detects that there is already SPS/PPS in the stream and sets h264parse->push_codec to FALSE. Therefore avc3->bytstream was already supported, except for the stream type. In the case of bystream->avc h264parse will generate codec_data caps from the parsed SPS/PPS in the stream. However it does not remove these SPS/PPS from the stream. bytestream->avc3 is the same as bytestream->avc except that the codec_data must not have any SPS/PPS in it. |--------------+-------------+-------------------| |stream-format | SPS in-band | SPS in codec_data | |--------------+-------------+-------------------| | avc | maybe | always | |--------------+-------------+-------------------| | avc3 | always | never | |--------------+-------------+-------------------| Amendment 2 of ISO/IEC 14496-15 (AVC file format) is defining a new structure for fragmented MP4 called "avc3". The principal difference between AVC1 and AVC3 is the location of the codec initialisation data (e.g. SPS, PPS). In AVC1 this data is placed in the initial MOOV box (moov.trak.mdia.minf.stbl.stsd.avc1) but in AVC3 this data goes in the first sample of every fragment. https://bugzilla.gnome.org/show_bug.cgi?id=702004
2013-08-30 12:54:40 +00:00
"stream-format=(string) { avc, avc3, byte-stream }, "
"alignment=(string) { au, nal }"));
#define parent_class gst_h264_parse_parent_class
G_DEFINE_TYPE (GstH264Parse, gst_h264_parse, GST_TYPE_BASE_PARSE);
static void gst_h264_parse_finalize (GObject * object);
static gboolean gst_h264_parse_start (GstBaseParse * parse);
static gboolean gst_h264_parse_stop (GstBaseParse * parse);
static GstFlowReturn gst_h264_parse_handle_frame (GstBaseParse * parse,
GstBaseParseFrame * frame, gint * skipsize);
static GstFlowReturn gst_h264_parse_parse_frame (GstBaseParse * parse,
GstBaseParseFrame * frame);
static GstFlowReturn gst_h264_parse_pre_push_frame (GstBaseParse * parse,
GstBaseParseFrame * frame);
static void gst_h264_parse_set_property (GObject * object, guint prop_id,
const GValue * value, GParamSpec * pspec);
static void gst_h264_parse_get_property (GObject * object, guint prop_id,
GValue * value, GParamSpec * pspec);
static gboolean gst_h264_parse_set_caps (GstBaseParse * parse, GstCaps * caps);
static GstCaps *gst_h264_parse_get_caps (GstBaseParse * parse,
GstCaps * filter);
static gboolean gst_h264_parse_event (GstBaseParse * parse, GstEvent * event);
static gboolean gst_h264_parse_src_event (GstBaseParse * parse,
GstEvent * event);
static void
gst_h264_parse_class_init (GstH264ParseClass * klass)
{
GObjectClass *gobject_class = (GObjectClass *) klass;
GstBaseParseClass *parse_class = GST_BASE_PARSE_CLASS (klass);
GstElementClass *gstelement_class = GST_ELEMENT_CLASS (klass);
GST_DEBUG_CATEGORY_INIT (h264_parse_debug, "h264parse", 0, "h264 parser");
gobject_class->finalize = gst_h264_parse_finalize;
gobject_class->set_property = gst_h264_parse_set_property;
gobject_class->get_property = gst_h264_parse_get_property;
g_object_class_install_property (gobject_class, PROP_CONFIG_INTERVAL,
g_param_spec_uint ("config-interval",
"SPS PPS Send Interval",
"Send SPS and PPS Insertion Interval in seconds (sprop parameter sets "
"will be multiplexed in the data stream when detected.) (0 = disabled)",
0, 3600, DEFAULT_CONFIG_INTERVAL,
G_PARAM_READWRITE | G_PARAM_CONSTRUCT | G_PARAM_STATIC_STRINGS));
/* Override BaseParse vfuncs */
parse_class->start = GST_DEBUG_FUNCPTR (gst_h264_parse_start);
parse_class->stop = GST_DEBUG_FUNCPTR (gst_h264_parse_stop);
parse_class->handle_frame = GST_DEBUG_FUNCPTR (gst_h264_parse_handle_frame);
parse_class->pre_push_frame =
GST_DEBUG_FUNCPTR (gst_h264_parse_pre_push_frame);
parse_class->set_sink_caps = GST_DEBUG_FUNCPTR (gst_h264_parse_set_caps);
parse_class->get_sink_caps = GST_DEBUG_FUNCPTR (gst_h264_parse_get_caps);
parse_class->sink_event = GST_DEBUG_FUNCPTR (gst_h264_parse_event);
parse_class->src_event = GST_DEBUG_FUNCPTR (gst_h264_parse_src_event);
gst_element_class_add_pad_template (gstelement_class,
gst_static_pad_template_get (&srctemplate));
gst_element_class_add_pad_template (gstelement_class,
gst_static_pad_template_get (&sinktemplate));
gst_element_class_set_static_metadata (gstelement_class, "H.264 parser",
"Codec/Parser/Converter/Video",
"Parses H.264 streams",
"Mark Nauwelaerts <mark.nauwelaerts@collabora.co.uk>");
}
static void
gst_h264_parse_init (GstH264Parse * h264parse)
{
h264parse->frame_out = gst_adapter_new ();
gst_base_parse_set_pts_interpolation (GST_BASE_PARSE (h264parse), FALSE);
GST_PAD_SET_ACCEPT_INTERSECT (GST_BASE_PARSE_SINK_PAD (h264parse));
}
static void
gst_h264_parse_finalize (GObject * object)
{
GstH264Parse *h264parse = GST_H264_PARSE (object);
g_object_unref (h264parse->frame_out);
2011-03-22 12:18:03 +00:00
G_OBJECT_CLASS (parent_class)->finalize (object);
}
static void
gst_h264_parse_reset_frame (GstH264Parse * h264parse)
{
GST_DEBUG_OBJECT (h264parse, "reset frame");
/* done parsing; reset state */
h264parse->current_off = -1;
h264parse->picture_start = FALSE;
h264parse->update_caps = FALSE;
h264parse->idr_pos = -1;
h264parse->sei_pos = -1;
h264parse->keyframe = FALSE;
h264parse->frame_start = FALSE;
gst_adapter_clear (h264parse->frame_out);
}
static void
gst_h264_parse_reset (GstH264Parse * h264parse)
{
h264parse->width = 0;
h264parse->height = 0;
h264parse->fps_num = 0;
h264parse->fps_den = 0;
h264parse->upstream_par_n = -1;
h264parse->upstream_par_d = -1;
h264parse->parsed_par_n = 0;
h264parse->parsed_par_d = 0;
gst_buffer_replace (&h264parse->codec_data, NULL);
gst_buffer_replace (&h264parse->codec_data_in, NULL);
h264parse->nal_length_size = 4;
h264parse->packetized = FALSE;
h264parse->transform = FALSE;
h264parse->align = GST_H264_PARSE_ALIGN_NONE;
h264parse->format = GST_H264_PARSE_FORMAT_NONE;
h264parse->last_report = GST_CLOCK_TIME_NONE;
h264parse->push_codec = FALSE;
h264parse->have_pps = FALSE;
h264parse->have_sps = FALSE;
h264parse->dts = GST_CLOCK_TIME_NONE;
h264parse->ts_trn_nb = GST_CLOCK_TIME_NONE;
h264parse->do_ts = TRUE;
2013-12-16 09:18:23 +00:00
h264parse->sent_codec_tag = FALSE;
h264parse->pending_key_unit_ts = GST_CLOCK_TIME_NONE;
gst_event_replace (&h264parse->force_key_unit_event, NULL);
h264parse->discont = FALSE;
gst_h264_parse_reset_frame (h264parse);
}
static gboolean
gst_h264_parse_start (GstBaseParse * parse)
{
GstH264Parse *h264parse = GST_H264_PARSE (parse);
GST_DEBUG_OBJECT (parse, "start");
gst_h264_parse_reset (h264parse);
h264parse->nalparser = gst_h264_nal_parser_new ();
h264parse->dts = GST_CLOCK_TIME_NONE;
h264parse->ts_trn_nb = GST_CLOCK_TIME_NONE;
h264parse->sei_pic_struct_pres_flag = FALSE;
h264parse->sei_pic_struct = 0;
h264parse->field_pic_flag = 0;
gst_base_parse_set_min_frame_size (parse, 6);
return TRUE;
}
static gboolean
gst_h264_parse_stop (GstBaseParse * parse)
{
guint i;
GstH264Parse *h264parse = GST_H264_PARSE (parse);
GST_DEBUG_OBJECT (parse, "stop");
gst_h264_parse_reset (h264parse);
for (i = 0; i < GST_H264_MAX_SPS_COUNT; i++)
gst_buffer_replace (&h264parse->sps_nals[i], NULL);
for (i = 0; i < GST_H264_MAX_PPS_COUNT; i++)
gst_buffer_replace (&h264parse->pps_nals[i], NULL);
gst_h264_nal_parser_free (h264parse->nalparser);
return TRUE;
}
static const gchar *
gst_h264_parse_get_string (GstH264Parse * parse, gboolean format, gint code)
{
if (format) {
switch (code) {
case GST_H264_PARSE_FORMAT_AVC:
return "avc";
case GST_H264_PARSE_FORMAT_BYTE:
return "byte-stream";
h264parse: Add support for stream-format=avc3 When outputting in AVC3 stream format, the codec_data should not contain any SPS or PPS, because they are embedded inside the stream. In case of avc->bytestream h264parse will push the SPS and PPS from codec_data downstream at the start of the stream, at intervals controlled by "config-interval" and when there is a codec_data change. In the case of avc3->bytstream h264parse detects that there is already SPS/PPS in the stream and sets h264parse->push_codec to FALSE. Therefore avc3->bytstream was already supported, except for the stream type. In the case of bystream->avc h264parse will generate codec_data caps from the parsed SPS/PPS in the stream. However it does not remove these SPS/PPS from the stream. bytestream->avc3 is the same as bytestream->avc except that the codec_data must not have any SPS/PPS in it. |--------------+-------------+-------------------| |stream-format | SPS in-band | SPS in codec_data | |--------------+-------------+-------------------| | avc | maybe | always | |--------------+-------------+-------------------| | avc3 | always | never | |--------------+-------------+-------------------| Amendment 2 of ISO/IEC 14496-15 (AVC file format) is defining a new structure for fragmented MP4 called "avc3". The principal difference between AVC1 and AVC3 is the location of the codec initialisation data (e.g. SPS, PPS). In AVC1 this data is placed in the initial MOOV box (moov.trak.mdia.minf.stbl.stsd.avc1) but in AVC3 this data goes in the first sample of every fragment. https://bugzilla.gnome.org/show_bug.cgi?id=702004
2013-08-30 12:54:40 +00:00
case GST_H264_PARSE_FORMAT_AVC3:
return "avc3";
default:
return "none";
}
} else {
switch (code) {
case GST_H264_PARSE_ALIGN_NAL:
return "nal";
case GST_H264_PARSE_ALIGN_AU:
return "au";
default:
return "none";
}
}
}
static void
gst_h264_parse_format_from_caps (GstCaps * caps, guint * format, guint * align)
{
if (format)
*format = GST_H264_PARSE_FORMAT_NONE;
if (align)
*align = GST_H264_PARSE_ALIGN_NONE;
g_return_if_fail (gst_caps_is_fixed (caps));
GST_DEBUG ("parsing caps: %" GST_PTR_FORMAT, caps);
if (caps && gst_caps_get_size (caps) > 0) {
GstStructure *s = gst_caps_get_structure (caps, 0);
const gchar *str = NULL;
if (format) {
if ((str = gst_structure_get_string (s, "stream-format"))) {
if (strcmp (str, "avc") == 0)
*format = GST_H264_PARSE_FORMAT_AVC;
else if (strcmp (str, "byte-stream") == 0)
*format = GST_H264_PARSE_FORMAT_BYTE;
h264parse: Add support for stream-format=avc3 When outputting in AVC3 stream format, the codec_data should not contain any SPS or PPS, because they are embedded inside the stream. In case of avc->bytestream h264parse will push the SPS and PPS from codec_data downstream at the start of the stream, at intervals controlled by "config-interval" and when there is a codec_data change. In the case of avc3->bytstream h264parse detects that there is already SPS/PPS in the stream and sets h264parse->push_codec to FALSE. Therefore avc3->bytstream was already supported, except for the stream type. In the case of bystream->avc h264parse will generate codec_data caps from the parsed SPS/PPS in the stream. However it does not remove these SPS/PPS from the stream. bytestream->avc3 is the same as bytestream->avc except that the codec_data must not have any SPS/PPS in it. |--------------+-------------+-------------------| |stream-format | SPS in-band | SPS in codec_data | |--------------+-------------+-------------------| | avc | maybe | always | |--------------+-------------+-------------------| | avc3 | always | never | |--------------+-------------+-------------------| Amendment 2 of ISO/IEC 14496-15 (AVC file format) is defining a new structure for fragmented MP4 called "avc3". The principal difference between AVC1 and AVC3 is the location of the codec initialisation data (e.g. SPS, PPS). In AVC1 this data is placed in the initial MOOV box (moov.trak.mdia.minf.stbl.stsd.avc1) but in AVC3 this data goes in the first sample of every fragment. https://bugzilla.gnome.org/show_bug.cgi?id=702004
2013-08-30 12:54:40 +00:00
else if (strcmp (str, "avc3") == 0)
*format = GST_H264_PARSE_FORMAT_AVC3;
}
}
if (align) {
if ((str = gst_structure_get_string (s, "alignment"))) {
if (strcmp (str, "au") == 0)
*align = GST_H264_PARSE_ALIGN_AU;
else if (strcmp (str, "nal") == 0)
*align = GST_H264_PARSE_ALIGN_NAL;
}
}
}
}
/* check downstream caps to configure format and alignment */
static void
gst_h264_parse_negotiate (GstH264Parse * h264parse, gint in_format,
GstCaps * in_caps)
{
GstCaps *caps;
guint format = GST_H264_PARSE_FORMAT_NONE;
guint align = GST_H264_PARSE_ALIGN_NONE;
g_return_if_fail ((in_caps == NULL) || gst_caps_is_fixed (in_caps));
caps = gst_pad_get_allowed_caps (GST_BASE_PARSE_SRC_PAD (h264parse));
GST_DEBUG_OBJECT (h264parse, "allowed caps: %" GST_PTR_FORMAT, caps);
/* concentrate on leading structure, since decodebin2 parser
* capsfilter always includes parser template caps */
if (caps) {
2012-03-11 18:06:59 +00:00
caps = gst_caps_truncate (caps);
GST_DEBUG_OBJECT (h264parse, "negotiating with caps: %" GST_PTR_FORMAT,
caps);
}
if (in_caps && caps) {
if (gst_caps_can_intersect (in_caps, caps)) {
GST_DEBUG_OBJECT (h264parse, "downstream accepts upstream caps");
gst_h264_parse_format_from_caps (in_caps, &format, &align);
gst_caps_unref (caps);
caps = NULL;
}
}
if (caps) {
/* fixate to avoid ambiguity with lists when parsing */
2012-03-11 18:06:59 +00:00
caps = gst_caps_fixate (caps);
gst_h264_parse_format_from_caps (caps, &format, &align);
gst_caps_unref (caps);
}
/* default */
if (!format)
format = GST_H264_PARSE_FORMAT_BYTE;
if (!align)
align = GST_H264_PARSE_ALIGN_AU;
GST_DEBUG_OBJECT (h264parse, "selected format %s, alignment %s",
gst_h264_parse_get_string (h264parse, TRUE, format),
gst_h264_parse_get_string (h264parse, FALSE, align));
h264parse->format = format;
h264parse->align = align;
h264parse->transform = in_format != h264parse->format ||
align == GST_H264_PARSE_ALIGN_AU;
}
static GstBuffer *
gst_h264_parse_wrap_nal (GstH264Parse * h264parse, guint format, guint8 * data,
guint size)
{
GstBuffer *buf;
guint nl = h264parse->nal_length_size;
guint32 tmp;
GST_DEBUG_OBJECT (h264parse, "nal length %d", size);
buf = gst_buffer_new_allocate (NULL, 4 + size, NULL);
h264parse: Add support for stream-format=avc3 When outputting in AVC3 stream format, the codec_data should not contain any SPS or PPS, because they are embedded inside the stream. In case of avc->bytestream h264parse will push the SPS and PPS from codec_data downstream at the start of the stream, at intervals controlled by "config-interval" and when there is a codec_data change. In the case of avc3->bytstream h264parse detects that there is already SPS/PPS in the stream and sets h264parse->push_codec to FALSE. Therefore avc3->bytstream was already supported, except for the stream type. In the case of bystream->avc h264parse will generate codec_data caps from the parsed SPS/PPS in the stream. However it does not remove these SPS/PPS from the stream. bytestream->avc3 is the same as bytestream->avc except that the codec_data must not have any SPS/PPS in it. |--------------+-------------+-------------------| |stream-format | SPS in-band | SPS in codec_data | |--------------+-------------+-------------------| | avc | maybe | always | |--------------+-------------+-------------------| | avc3 | always | never | |--------------+-------------+-------------------| Amendment 2 of ISO/IEC 14496-15 (AVC file format) is defining a new structure for fragmented MP4 called "avc3". The principal difference between AVC1 and AVC3 is the location of the codec initialisation data (e.g. SPS, PPS). In AVC1 this data is placed in the initial MOOV box (moov.trak.mdia.minf.stbl.stsd.avc1) but in AVC3 this data goes in the first sample of every fragment. https://bugzilla.gnome.org/show_bug.cgi?id=702004
2013-08-30 12:54:40 +00:00
if (format == GST_H264_PARSE_FORMAT_AVC
|| format == GST_H264_PARSE_FORMAT_AVC3) {
tmp = GUINT32_TO_BE (size << (32 - 8 * nl));
} else {
/* HACK: nl should always be 4 here, otherwise this won't work.
* There are legit cases where nl in avc stream is 2, but byte-stream
* SC is still always 4 bytes. */
nl = 4;
tmp = GUINT32_TO_BE (1);
}
gst_buffer_fill (buf, 0, &tmp, sizeof (guint32));
gst_buffer_fill (buf, nl, data, size);
gst_buffer_set_size (buf, size + nl);
return buf;
}
static void
gst_h264_parser_store_nal (GstH264Parse * h264parse, guint id,
GstH264NalUnitType naltype, GstH264NalUnit * nalu)
{
GstBuffer *buf, **store;
guint size = nalu->size, store_size;
if (naltype == GST_H264_NAL_SPS) {
store_size = GST_H264_MAX_SPS_COUNT;
store = h264parse->sps_nals;
GST_DEBUG_OBJECT (h264parse, "storing sps %u", id);
} else if (naltype == GST_H264_NAL_PPS) {
store_size = GST_H264_MAX_PPS_COUNT;
store = h264parse->pps_nals;
GST_DEBUG_OBJECT (h264parse, "storing pps %u", id);
} else
return;
if (id >= store_size) {
GST_DEBUG_OBJECT (h264parse, "unable to store nal, id out-of-range %d", id);
return;
}
2012-03-15 12:37:36 +00:00
buf = gst_buffer_new_allocate (NULL, size, NULL);
gst_buffer_fill (buf, 0, nalu->data + nalu->offset, size);
if (store[id])
gst_buffer_unref (store[id]);
store[id] = buf;
}
#ifndef GST_DISABLE_GST_DEBUG
static const gchar *nal_names[] = {
"Unknown",
"Slice",
"Slice DPA",
"Slice DPB",
"Slice DPC",
"Slice IDR",
"SEI",
"SPS",
"PPS",
"AU delimiter",
"Sequence End",
"Stream End",
"Filler Data"
};
static const gchar *
_nal_name (GstH264NalUnitType nal_type)
{
if (nal_type <= GST_H264_NAL_FILLER_DATA)
return nal_names[nal_type];
return "Invalid";
}
#endif
static void
gst_h264_parse_process_sei (GstH264Parse * h264parse, GstH264NalUnit * nalu)
{
GstH264SEIMessage sei;
GstH264NalParser *nalparser = h264parse->nalparser;
GstH264ParserResult pres;
GArray *messages;
guint i;
pres = gst_h264_parser_parse_sei (nalparser, nalu, &messages);
if (pres != GST_H264_PARSER_OK)
GST_WARNING_OBJECT (h264parse, "failed to parse one ore more SEI message");
/* Even if pres != GST_H264_PARSER_OK, some message could have been parsed and
* stored in messages.
*/
for (i = 0; i < messages->len; i++) {
sei = g_array_index (messages, GstH264SEIMessage, i);
switch (sei.payloadType) {
case GST_H264_SEI_PIC_TIMING:
h264parse->sei_pic_struct_pres_flag =
sei.payload.pic_timing.pic_struct_present_flag;
h264parse->sei_cpb_removal_delay =
sei.payload.pic_timing.cpb_removal_delay;
if (h264parse->sei_pic_struct_pres_flag)
h264parse->sei_pic_struct = sei.payload.pic_timing.pic_struct;
GST_LOG_OBJECT (h264parse, "pic timing updated");
break;
case GST_H264_SEI_BUF_PERIOD:
if (h264parse->ts_trn_nb == GST_CLOCK_TIME_NONE ||
h264parse->dts == GST_CLOCK_TIME_NONE)
h264parse->ts_trn_nb = 0;
else
h264parse->ts_trn_nb = h264parse->dts;
GST_LOG_OBJECT (h264parse,
"new buffering period; ts_trn_nb updated: %" GST_TIME_FORMAT,
GST_TIME_ARGS (h264parse->ts_trn_nb));
break;
/* Additional messages that are not innerly useful to the
* element but for debugging purposes */
case GST_H264_SEI_RECOVERY_POINT:
GST_LOG_OBJECT (h264parse, "recovery point found: %u %u %u %u",
sei.payload.recovery_point.recovery_frame_cnt,
sei.payload.recovery_point.exact_match_flag,
sei.payload.recovery_point.broken_link_flag,
sei.payload.recovery_point.changing_slice_group_idc);
break;
}
}
g_array_free (messages, TRUE);
}
/* caller guarantees 2 bytes of nal payload */
static gboolean
gst_h264_parse_process_nal (GstH264Parse * h264parse, GstH264NalUnit * nalu)
{
guint nal_type;
GstH264PPS pps = { 0, };
GstH264SPS sps = { 0, };
GstH264NalParser *nalparser = h264parse->nalparser;
GstH264ParserResult pres;
/* nothing to do for broken input */
if (G_UNLIKELY (nalu->size < 2)) {
GST_DEBUG_OBJECT (h264parse, "not processing nal size %u", nalu->size);
return TRUE;
}
/* we have a peek as well */
nal_type = nalu->type;
GST_DEBUG_OBJECT (h264parse, "processing nal of type %u %s, size %u",
nal_type, _nal_name (nal_type), nalu->size);
switch (nal_type) {
case GST_H264_NAL_SPS:
/* reset state, everything else is obsolete */
h264parse->state = 0;
pres = gst_h264_parser_parse_sps (nalparser, nalu, &sps, TRUE);
/* arranged for a fallback sps.id, so use that one and only warn */
if (pres != GST_H264_PARSER_OK) {
GST_WARNING_OBJECT (h264parse, "failed to parse SPS:");
return FALSE;
}
GST_DEBUG_OBJECT (h264parse, "triggering src caps check");
h264parse->update_caps = TRUE;
h264parse->have_sps = TRUE;
if (h264parse->push_codec && h264parse->have_pps) {
/* SPS and PPS found in stream before the first pre_push_frame, no need
* to forcibly push at start */
GST_INFO_OBJECT (h264parse, "have SPS/PPS in stream");
h264parse->push_codec = FALSE;
h264parse->have_sps = FALSE;
h264parse->have_pps = FALSE;
}
gst_h264_parser_store_nal (h264parse, sps.id, nal_type, nalu);
h264parse->state |= GST_H264_PARSE_STATE_GOT_SPS;
break;
case GST_H264_NAL_PPS:
/* expected state: got-sps */
h264parse->state &= GST_H264_PARSE_STATE_GOT_SPS;
if (!GST_H264_PARSE_STATE_VALID (h264parse, GST_H264_PARSE_STATE_GOT_SPS))
return FALSE;
pres = gst_h264_parser_parse_pps (nalparser, nalu, &pps);
/* arranged for a fallback pps.id, so use that one and only warn */
if (pres != GST_H264_PARSER_OK) {
GST_WARNING_OBJECT (h264parse, "failed to parse PPS:");
if (pres != GST_H264_PARSER_BROKEN_LINK)
return FALSE;
}
/* parameters might have changed, force caps check */
if (!h264parse->have_pps) {
GST_DEBUG_OBJECT (h264parse, "triggering src caps check");
h264parse->update_caps = TRUE;
}
h264parse->have_pps = TRUE;
if (h264parse->push_codec && h264parse->have_sps) {
/* SPS and PPS found in stream before the first pre_push_frame, no need
* to forcibly push at start */
GST_INFO_OBJECT (h264parse, "have SPS/PPS in stream");
h264parse->push_codec = FALSE;
h264parse->have_sps = FALSE;
h264parse->have_pps = FALSE;
}
gst_h264_parser_store_nal (h264parse, pps.id, nal_type, nalu);
gst_h264_pps_clear (&pps);
h264parse->state |= GST_H264_PARSE_STATE_GOT_PPS;
break;
case GST_H264_NAL_SEI:
/* expected state: got-sps */
if (!GST_H264_PARSE_STATE_VALID (h264parse, GST_H264_PARSE_STATE_GOT_SPS))
return FALSE;
gst_h264_parse_process_sei (h264parse, nalu);
/* mark SEI pos */
if (h264parse->sei_pos == -1) {
if (h264parse->transform)
h264parse->sei_pos = gst_adapter_available (h264parse->frame_out);
else
h264parse->sei_pos = nalu->sc_offset;
GST_DEBUG_OBJECT (h264parse, "marking SEI in frame at offset %d",
h264parse->sei_pos);
}
break;
case GST_H264_NAL_SLICE:
case GST_H264_NAL_SLICE_DPA:
case GST_H264_NAL_SLICE_DPB:
case GST_H264_NAL_SLICE_DPC:
2011-12-05 12:09:17 +00:00
case GST_H264_NAL_SLICE_IDR:
/* expected state: got-sps|got-pps (valid picture headers) */
h264parse->state &= GST_H264_PARSE_STATE_VALID_PICTURE_HEADERS;
if (!GST_H264_PARSE_STATE_VALID (h264parse,
GST_H264_PARSE_STATE_VALID_PICTURE_HEADERS))
return FALSE;
/* don't need to parse the whole slice (header) here */
if (*(nalu->data + nalu->offset + 1) & 0x80) {
2011-12-05 12:09:17 +00:00
/* means first_mb_in_slice == 0 */
/* real frame data */
GST_DEBUG_OBJECT (h264parse, "first_mb_in_slice = 0");
h264parse->frame_start = TRUE;
}
2011-12-05 12:09:17 +00:00
GST_DEBUG_OBJECT (h264parse, "frame start: %i", h264parse->frame_start);
{
GstH264SliceHdr slice;
2011-12-05 12:09:17 +00:00
pres = gst_h264_parser_parse_slice_hdr (nalparser, nalu, &slice,
FALSE, FALSE);
GST_DEBUG_OBJECT (h264parse,
"parse result %d, first MB: %u, slice type: %u",
pres, slice.first_mb_in_slice, slice.type);
if (pres == GST_H264_PARSER_OK) {
if (GST_H264_IS_I_SLICE (&slice) || GST_H264_IS_SI_SLICE (&slice))
h264parse->keyframe |= TRUE;
h264parse->state |= GST_H264_PARSE_STATE_GOT_SLICE;
h264parse->field_pic_flag = slice.field_pic_flag;
}
2011-12-05 12:09:17 +00:00
}
if (G_LIKELY (nal_type != GST_H264_NAL_SLICE_IDR &&
!h264parse->push_codec))
break;
/* if we need to sneak codec NALs into the stream,
* this is a good place, so fake it as IDR
* (which should be at start anyway) */
/* mark where config needs to go if interval expired */
/* mind replacement buffer if applicable */
if (h264parse->idr_pos == -1) {
if (h264parse->transform)
h264parse->idr_pos = gst_adapter_available (h264parse->frame_out);
else
h264parse->idr_pos = nalu->sc_offset;
GST_DEBUG_OBJECT (h264parse, "marking IDR in frame at offset %d",
h264parse->idr_pos);
}
/* if SEI preceeds (faked) IDR, then we have to insert config there */
if (h264parse->sei_pos >= 0 && h264parse->idr_pos > h264parse->sei_pos) {
h264parse->idr_pos = h264parse->sei_pos;
GST_DEBUG_OBJECT (h264parse, "moved IDR mark to SEI position %d",
h264parse->idr_pos);
}
break;
default:
/* drop anything before the initial SPS */
if (!GST_H264_PARSE_STATE_VALID (h264parse, GST_H264_PARSE_STATE_GOT_SPS))
return FALSE;
pres = gst_h264_parser_parse_nal (nalparser, nalu);
if (pres != GST_H264_PARSER_OK)
return FALSE;
break;
}
/* if AVC output needed, collect properly prefixed nal in adapter,
* and use that to replace outgoing buffer data later on */
if (h264parse->transform) {
GstBuffer *buf;
GST_LOG_OBJECT (h264parse, "collecting NAL in AVC frame");
buf = gst_h264_parse_wrap_nal (h264parse, h264parse->format,
nalu->data + nalu->offset, nalu->size);
gst_adapter_push (h264parse->frame_out, buf);
}
return TRUE;
}
/* caller guarantees at least 2 bytes of nal payload for each nal
* returns TRUE if next_nal indicates that nal terminates an AU */
static inline gboolean
gst_h264_parse_collect_nal (GstH264Parse * h264parse, const guint8 * data,
guint size, GstH264NalUnit * nalu)
{
gboolean complete;
GstH264ParserResult parse_res;
GstH264NalUnitType nal_type = nalu->type;
GstH264NalUnit nnalu;
GST_DEBUG_OBJECT (h264parse, "parsing collected nal");
parse_res = gst_h264_parser_identify_nalu_unchecked (h264parse->nalparser,
data, nalu->offset + nalu->size, size, &nnalu);
if (parse_res != GST_H264_PARSER_OK)
return FALSE;
/* determine if AU complete */
GST_LOG_OBJECT (h264parse, "nal type: %d %s", nal_type, _nal_name (nal_type));
/* coded slice NAL starts a picture,
* i.e. other types become aggregated in front of it */
h264parse->picture_start |= (nal_type == GST_H264_NAL_SLICE ||
nal_type == GST_H264_NAL_SLICE_DPA || nal_type == GST_H264_NAL_SLICE_IDR);
/* consider a coded slices (IDR or not) to start a picture,
* (so ending the previous one) if first_mb_in_slice == 0
* (non-0 is part of previous one) */
/* NOTE this is not entirely according to Access Unit specs in 7.4.1.2.4,
* but in practice it works in sane cases, needs not much parsing,
* and also works with broken frame_num in NAL
* (where spec-wise would fail) */
nal_type = nnalu.type;
complete = h264parse->picture_start && (nal_type >= GST_H264_NAL_SEI &&
nal_type <= GST_H264_NAL_AU_DELIMITER);
GST_LOG_OBJECT (h264parse, "next nal type: %d %s", nal_type,
_nal_name (nal_type));
complete |= h264parse->picture_start && (nal_type == GST_H264_NAL_SLICE
|| nal_type == GST_H264_NAL_SLICE_DPA
|| nal_type == GST_H264_NAL_SLICE_IDR) &&
/* first_mb_in_slice == 0 considered start of frame */
(nnalu.data[nnalu.offset + 1] & 0x80);
GST_LOG_OBJECT (h264parse, "au complete: %d", complete);
return complete;
}
static GstFlowReturn
gst_h264_parse_handle_frame_packetized (GstBaseParse * parse,
GstBaseParseFrame * frame)
{
GstH264Parse *h264parse = GST_H264_PARSE (parse);
GstBuffer *buffer = frame->buffer;
GstFlowReturn ret = GST_FLOW_OK;
GstH264ParserResult parse_res;
GstH264NalUnit nalu;
const guint nl = h264parse->nal_length_size;
GstMapInfo map;
gint left;
if (nl < 1 || nl > 4) {
GST_DEBUG_OBJECT (h264parse, "insufficient data to split input");
return GST_FLOW_NOT_NEGOTIATED;
}
/* need to save buffer from invalidation upon _finish_frame */
if (h264parse->split_packetized)
buffer = gst_buffer_copy (frame->buffer);
gst_buffer_map (buffer, &map, GST_MAP_READ);
left = map.size;
GST_LOG_OBJECT (h264parse,
"processing packet buffer of size %" G_GSIZE_FORMAT, map.size);
parse_res = gst_h264_parser_identify_nalu_avc (h264parse->nalparser,
map.data, 0, map.size, nl, &nalu);
while (parse_res == GST_H264_PARSER_OK) {
GST_DEBUG_OBJECT (h264parse, "AVC nal offset %d", nalu.offset + nalu.size);
/* either way, have a look at it */
gst_h264_parse_process_nal (h264parse, &nalu);
/* dispatch per NALU if needed */
if (h264parse->split_packetized) {
GstBaseParseFrame tmp_frame;
gst_base_parse_frame_init (&tmp_frame);
tmp_frame.flags |= frame->flags;
tmp_frame.offset = frame->offset;
tmp_frame.overhead = frame->overhead;
tmp_frame.buffer = gst_buffer_copy_region (buffer, GST_BUFFER_COPY_ALL,
nalu.offset, nalu.size);
/* note we don't need to come up with a sub-buffer, since
* subsequent code only considers input buffer's metadata.
* Real data is either taken from input by baseclass or
* a replacement output buffer is provided anyway. */
gst_h264_parse_parse_frame (parse, &tmp_frame);
ret = gst_base_parse_finish_frame (parse, &tmp_frame, nl + nalu.size);
left -= nl + nalu.size;
}
parse_res = gst_h264_parser_identify_nalu_avc (h264parse->nalparser,
map.data, nalu.offset + nalu.size, map.size, nl, &nalu);
}
gst_buffer_unmap (buffer, &map);
if (!h264parse->split_packetized) {
gst_h264_parse_parse_frame (parse, frame);
ret = gst_base_parse_finish_frame (parse, frame, map.size);
} else {
gst_buffer_unref (buffer);
if (G_UNLIKELY (left)) {
/* should not be happening for nice AVC */
GST_WARNING_OBJECT (parse, "skipping leftover AVC data %d", left);
frame->flags |= GST_BASE_PARSE_FRAME_FLAG_DROP;
ret = gst_base_parse_finish_frame (parse, frame, map.size);
}
}
if (parse_res == GST_H264_PARSER_NO_NAL_END ||
parse_res == GST_H264_PARSER_BROKEN_DATA) {
if (h264parse->split_packetized) {
GST_ELEMENT_ERROR (h264parse, STREAM, FAILED, (NULL),
("invalid AVC input data"));
gst_buffer_unref (buffer);
return GST_FLOW_ERROR;
} else {
/* do not meddle to much in this case */
GST_DEBUG_OBJECT (h264parse, "parsing packet failed");
}
}
return ret;
}
static GstFlowReturn
gst_h264_parse_handle_frame (GstBaseParse * parse,
GstBaseParseFrame * frame, gint * skipsize)
{
GstH264Parse *h264parse = GST_H264_PARSE (parse);
GstBuffer *buffer = frame->buffer;
2012-01-25 15:20:41 +00:00
GstMapInfo map;
guint8 *data;
gsize size;
2012-02-13 11:26:11 +00:00
gint current_off = 0;
gboolean drain, nonext;
GstH264NalParser *nalparser = h264parse->nalparser;
GstH264NalUnit nalu;
GstH264ParserResult pres;
gint framesize;
if (G_UNLIKELY (GST_BUFFER_FLAG_IS_SET (frame->buffer,
GST_BUFFER_FLAG_DISCONT))) {
h264parse->discont = TRUE;
}
/* delegate in packetized case, no skipping should be needed */
if (h264parse->packetized)
return gst_h264_parse_handle_frame_packetized (parse, frame);
2012-01-25 15:20:41 +00:00
gst_buffer_map (buffer, &map, GST_MAP_READ);
data = map.data;
size = map.size;
/* expect at least 3 bytes startcode == sc, and 2 bytes NALU payload */
if (G_UNLIKELY (size < 5)) {
2012-01-25 15:20:41 +00:00
gst_buffer_unmap (buffer, &map);
*skipsize = 1;
return GST_FLOW_OK;
}
/* need to configure aggregation */
if (G_UNLIKELY (h264parse->format == GST_H264_PARSE_FORMAT_NONE))
gst_h264_parse_negotiate (h264parse, GST_H264_PARSE_FORMAT_BYTE, NULL);
2011-05-18 07:47:43 +00:00
/* avoid stale cached parsing state */
if (frame->flags & GST_BASE_PARSE_FRAME_FLAG_NEW_FRAME) {
2011-05-18 07:47:43 +00:00
GST_LOG_OBJECT (h264parse, "parsing new frame");
gst_h264_parse_reset_frame (h264parse);
} else {
GST_LOG_OBJECT (h264parse, "resuming frame parsing");
}
drain = GST_BASE_PARSE_DRAINING (parse);
nonext = FALSE;
current_off = h264parse->current_off;
if (current_off < 0)
current_off = 0;
g_assert (current_off < size);
GST_DEBUG_OBJECT (h264parse, "last parse position %d", current_off);
/* check for initial skip */
if (h264parse->current_off == -1) {
pres =
gst_h264_parser_identify_nalu_unchecked (nalparser, data, current_off,
size, &nalu);
switch (pres) {
case GST_H264_PARSER_OK:
if (nalu.sc_offset > 0) {
*skipsize = nalu.sc_offset;
goto skip;
}
break;
case GST_H264_PARSER_NO_NAL:
*skipsize = size - 3;
goto skip;
break;
default:
g_assert_not_reached ();
break;
}
}
while (TRUE) {
pres =
gst_h264_parser_identify_nalu (nalparser, data, current_off, size,
&nalu);
switch (pres) {
case GST_H264_PARSER_OK:
GST_DEBUG_OBJECT (h264parse, "complete nal (offset, size): (%u, %u) ",
nalu.offset, nalu.size);
break;
case GST_H264_PARSER_NO_NAL_END:
GST_DEBUG_OBJECT (h264parse, "not a complete nal found at offset %u",
nalu.offset);
/* if draining, accept it as complete nal */
if (drain) {
nonext = TRUE;
nalu.size = size - nalu.offset;
GST_DEBUG_OBJECT (h264parse, "draining, accepting with size %u",
nalu.size);
/* if it's not too short at least */
if (nalu.size < 2)
goto broken;
break;
}
/* otherwise need more */
goto more;
case GST_H264_PARSER_BROKEN_LINK:
GST_ELEMENT_ERROR (h264parse, STREAM, FORMAT,
("Error parsing H.264 stream"),
("The link to structure needed for the parsing couldn't be found"));
goto invalid_stream;
case GST_H264_PARSER_ERROR:
/* should not really occur either */
GST_ELEMENT_ERROR (h264parse, STREAM, FORMAT,
("Error parsing H.264 stream"), ("Invalid H.264 stream"));
goto invalid_stream;
case GST_H264_PARSER_NO_NAL:
GST_ELEMENT_ERROR (h264parse, STREAM, FORMAT,
("Error parsing H.264 stream"), ("No H.264 NAL unit found"));
goto invalid_stream;
case GST_H264_PARSER_BROKEN_DATA:
GST_WARNING_OBJECT (h264parse, "input stream is corrupt; "
"it contains a NAL unit of length %u", nalu.size);
broken:
/* broken nal at start -> arrange to skip it,
* otherwise have it terminate current au
* (and so it will be skipped on next frame round) */
if (current_off == 0) {
GST_DEBUG_OBJECT (h264parse, "skipping broken nal");
*skipsize = nalu.offset;
goto skip;
} else {
GST_DEBUG_OBJECT (h264parse, "terminating au");
nalu.size = 0;
nalu.offset = nalu.sc_offset;
goto end;
}
break;
default:
g_assert_not_reached ();
break;
}
GST_DEBUG_OBJECT (h264parse, "%p complete nal found. Off: %u, Size: %u",
data, nalu.offset, nalu.size);
/* simulate no next nal if none needed */
nonext = nonext || (h264parse->align == GST_H264_PARSE_ALIGN_NAL);
if (!nonext) {
if (nalu.offset + nalu.size + 4 + 2 > size) {
GST_DEBUG_OBJECT (h264parse, "not enough data for next NALU");
if (drain) {
GST_DEBUG_OBJECT (h264parse, "but draining anyway");
nonext = TRUE;
} else {
goto more;
}
}
}
if (!gst_h264_parse_process_nal (h264parse, &nalu)) {
GST_WARNING_OBJECT (h264parse,
"broken/invalid nal Type: %d %s, Size: %u will be dropped",
nalu.type, _nal_name (nalu.type), nalu.size);
*skipsize = nalu.size;
goto skip;
}
if (nonext)
break;
/* if no next nal, we know it's complete here */
if (gst_h264_parse_collect_nal (h264parse, data, size, &nalu))
break;
GST_DEBUG_OBJECT (h264parse, "Looking for more");
current_off = nalu.offset + nalu.size;
}
end:
framesize = nalu.offset + nalu.size;
2012-01-25 15:20:41 +00:00
gst_buffer_unmap (buffer, &map);
gst_h264_parse_parse_frame (parse, frame);
return gst_base_parse_finish_frame (parse, frame, framesize);
more:
*skipsize = 0;
/* Restart parsing from here next time */
if (current_off > 0)
h264parse->current_off = current_off;
/* Fall-through. */
out:
2012-01-25 15:20:41 +00:00
gst_buffer_unmap (buffer, &map);
return GST_FLOW_OK;
skip:
GST_DEBUG_OBJECT (h264parse, "skipping %d", *skipsize);
/* If we are collecting access units, we need to preserve the initial
* config headers (SPS, PPS et al.) and only reset the frame if another
* slice NAL was received. This means that broken pictures are discarded */
if (h264parse->align != GST_H264_PARSE_ALIGN_AU ||
!(h264parse->state & GST_H264_PARSE_STATE_VALID_PICTURE_HEADERS) ||
(h264parse->state & GST_H264_PARSE_STATE_GOT_SLICE))
gst_h264_parse_reset_frame (h264parse);
goto out;
invalid_stream:
gst_buffer_unmap (buffer, &map);
return GST_FLOW_ERROR;
}
/* byte together avc codec data based on collected pps and sps so far */
static GstBuffer *
gst_h264_parse_make_codec_data (GstH264Parse * h264parse)
{
GstBuffer *buf, *nal;
gint i, sps_size = 0, pps_size = 0, num_sps = 0, num_pps = 0;
guint8 profile_idc = 0, profile_comp = 0, level_idc = 0;
gboolean found = FALSE;
2012-01-25 15:20:41 +00:00
GstMapInfo map;
guint8 *data;
gint nl;
/* only nal payload in stored nals */
for (i = 0; i < GST_H264_MAX_SPS_COUNT; i++) {
if ((nal = h264parse->sps_nals[i])) {
gsize size = gst_buffer_get_size (nal);
num_sps++;
/* size bytes also count */
sps_size += size + 2;
if (size >= 4) {
guint8 tmp[3];
found = TRUE;
gst_buffer_extract (nal, 1, tmp, 3);
profile_idc = tmp[0];
profile_comp = tmp[1];
level_idc = tmp[2];
}
}
}
for (i = 0; i < GST_H264_MAX_PPS_COUNT; i++) {
if ((nal = h264parse->pps_nals[i])) {
num_pps++;
/* size bytes also count */
pps_size += gst_buffer_get_size (nal) + 2;
}
}
/* AVC3 has SPS/PPS inside the stream, not in the codec_data */
h264parse: Add support for stream-format=avc3 When outputting in AVC3 stream format, the codec_data should not contain any SPS or PPS, because they are embedded inside the stream. In case of avc->bytestream h264parse will push the SPS and PPS from codec_data downstream at the start of the stream, at intervals controlled by "config-interval" and when there is a codec_data change. In the case of avc3->bytstream h264parse detects that there is already SPS/PPS in the stream and sets h264parse->push_codec to FALSE. Therefore avc3->bytstream was already supported, except for the stream type. In the case of bystream->avc h264parse will generate codec_data caps from the parsed SPS/PPS in the stream. However it does not remove these SPS/PPS from the stream. bytestream->avc3 is the same as bytestream->avc except that the codec_data must not have any SPS/PPS in it. |--------------+-------------+-------------------| |stream-format | SPS in-band | SPS in codec_data | |--------------+-------------+-------------------| | avc | maybe | always | |--------------+-------------+-------------------| | avc3 | always | never | |--------------+-------------+-------------------| Amendment 2 of ISO/IEC 14496-15 (AVC file format) is defining a new structure for fragmented MP4 called "avc3". The principal difference between AVC1 and AVC3 is the location of the codec initialisation data (e.g. SPS, PPS). In AVC1 this data is placed in the initial MOOV box (moov.trak.mdia.minf.stbl.stsd.avc1) but in AVC3 this data goes in the first sample of every fragment. https://bugzilla.gnome.org/show_bug.cgi?id=702004
2013-08-30 12:54:40 +00:00
if (h264parse->format == GST_H264_PARSE_FORMAT_AVC3) {
num_sps = sps_size = 0;
num_pps = pps_size = 0;
h264parse: Add support for stream-format=avc3 When outputting in AVC3 stream format, the codec_data should not contain any SPS or PPS, because they are embedded inside the stream. In case of avc->bytestream h264parse will push the SPS and PPS from codec_data downstream at the start of the stream, at intervals controlled by "config-interval" and when there is a codec_data change. In the case of avc3->bytstream h264parse detects that there is already SPS/PPS in the stream and sets h264parse->push_codec to FALSE. Therefore avc3->bytstream was already supported, except for the stream type. In the case of bystream->avc h264parse will generate codec_data caps from the parsed SPS/PPS in the stream. However it does not remove these SPS/PPS from the stream. bytestream->avc3 is the same as bytestream->avc except that the codec_data must not have any SPS/PPS in it. |--------------+-------------+-------------------| |stream-format | SPS in-band | SPS in codec_data | |--------------+-------------+-------------------| | avc | maybe | always | |--------------+-------------+-------------------| | avc3 | always | never | |--------------+-------------+-------------------| Amendment 2 of ISO/IEC 14496-15 (AVC file format) is defining a new structure for fragmented MP4 called "avc3". The principal difference between AVC1 and AVC3 is the location of the codec initialisation data (e.g. SPS, PPS). In AVC1 this data is placed in the initial MOOV box (moov.trak.mdia.minf.stbl.stsd.avc1) but in AVC3 this data goes in the first sample of every fragment. https://bugzilla.gnome.org/show_bug.cgi?id=702004
2013-08-30 12:54:40 +00:00
}
GST_DEBUG_OBJECT (h264parse,
"constructing codec_data: num_sps=%d, num_pps=%d", num_sps, num_pps);
h264parse: Add support for stream-format=avc3 When outputting in AVC3 stream format, the codec_data should not contain any SPS or PPS, because they are embedded inside the stream. In case of avc->bytestream h264parse will push the SPS and PPS from codec_data downstream at the start of the stream, at intervals controlled by "config-interval" and when there is a codec_data change. In the case of avc3->bytstream h264parse detects that there is already SPS/PPS in the stream and sets h264parse->push_codec to FALSE. Therefore avc3->bytstream was already supported, except for the stream type. In the case of bystream->avc h264parse will generate codec_data caps from the parsed SPS/PPS in the stream. However it does not remove these SPS/PPS from the stream. bytestream->avc3 is the same as bytestream->avc except that the codec_data must not have any SPS/PPS in it. |--------------+-------------+-------------------| |stream-format | SPS in-band | SPS in codec_data | |--------------+-------------+-------------------| | avc | maybe | always | |--------------+-------------+-------------------| | avc3 | always | never | |--------------+-------------+-------------------| Amendment 2 of ISO/IEC 14496-15 (AVC file format) is defining a new structure for fragmented MP4 called "avc3". The principal difference between AVC1 and AVC3 is the location of the codec initialisation data (e.g. SPS, PPS). In AVC1 this data is placed in the initial MOOV box (moov.trak.mdia.minf.stbl.stsd.avc1) but in AVC3 this data goes in the first sample of every fragment. https://bugzilla.gnome.org/show_bug.cgi?id=702004
2013-08-30 12:54:40 +00:00
if (!found || (0 == num_pps
&& GST_H264_PARSE_FORMAT_AVC3 != h264parse->format))
return NULL;
2012-03-15 12:37:36 +00:00
buf = gst_buffer_new_allocate (NULL, 5 + 1 + sps_size + 1 + pps_size, NULL);
2012-01-25 15:20:41 +00:00
gst_buffer_map (buf, &map, GST_MAP_WRITE);
data = map.data;
nl = h264parse->nal_length_size;
data[0] = 1; /* AVC Decoder Configuration Record ver. 1 */
data[1] = profile_idc; /* profile_idc */
data[2] = profile_comp; /* profile_compability */
data[3] = level_idc; /* level_idc */
data[4] = 0xfc | (nl - 1); /* nal_length_size_minus1 */
data[5] = 0xe0 | num_sps; /* number of SPSs */
data += 6;
if (h264parse->format != GST_H264_PARSE_FORMAT_AVC3) {
for (i = 0; i < GST_H264_MAX_SPS_COUNT; i++) {
if ((nal = h264parse->sps_nals[i])) {
gsize nal_size = gst_buffer_get_size (nal);
GST_WRITE_UINT16_BE (data, nal_size);
gst_buffer_extract (nal, 0, data + 2, nal_size);
data += 2 + nal_size;
}
}
}
data[0] = num_pps;
data++;
if (h264parse->format != GST_H264_PARSE_FORMAT_AVC3) {
for (i = 0; i < GST_H264_MAX_PPS_COUNT; i++) {
if ((nal = h264parse->pps_nals[i])) {
gsize nal_size = gst_buffer_get_size (nal);
GST_WRITE_UINT16_BE (data, nal_size);
gst_buffer_extract (nal, 0, data + 2, nal_size);
data += 2 + nal_size;
}
}
}
2012-01-25 15:20:41 +00:00
gst_buffer_unmap (buf, &map);
return buf;
}
static void
gst_h264_parse_get_par (GstH264Parse * h264parse, gint * num, gint * den)
{
if (h264parse->upstream_par_n != -1 && h264parse->upstream_par_d != -1) {
*num = h264parse->upstream_par_n;
*den = h264parse->upstream_par_d;
} else {
*num = h264parse->parsed_par_n;
*den = h264parse->parsed_par_d;
}
}
static void
gst_h264_parse_update_src_caps (GstH264Parse * h264parse, GstCaps * caps)
{
GstH264SPS *sps;
GstCaps *sink_caps, *src_caps;
gboolean modified = FALSE;
GstBuffer *buf = NULL;
GstStructure *s = NULL;
if (G_UNLIKELY (!gst_pad_has_current_caps (GST_BASE_PARSE_SRC_PAD
(h264parse))))
modified = TRUE;
else if (G_UNLIKELY (!h264parse->update_caps))
return;
/* if this is being called from the first _setcaps call, caps on the sinkpad
* aren't set yet and so they need to be passed as an argument */
if (caps)
2012-02-09 13:42:23 +00:00
sink_caps = gst_caps_ref (caps);
else
sink_caps = gst_pad_get_current_caps (GST_BASE_PARSE_SINK_PAD (h264parse));
/* carry over input caps as much as possible; override with our own stuff */
if (!sink_caps)
sink_caps = gst_caps_new_empty_simple ("video/x-h264");
else
s = gst_caps_get_structure (sink_caps, 0);
sps = h264parse->nalparser->last_sps;
GST_DEBUG_OBJECT (h264parse, "sps: %p", sps);
/* only codec-data for nice-and-clean au aligned packetized avc format */
h264parse: Add support for stream-format=avc3 When outputting in AVC3 stream format, the codec_data should not contain any SPS or PPS, because they are embedded inside the stream. In case of avc->bytestream h264parse will push the SPS and PPS from codec_data downstream at the start of the stream, at intervals controlled by "config-interval" and when there is a codec_data change. In the case of avc3->bytstream h264parse detects that there is already SPS/PPS in the stream and sets h264parse->push_codec to FALSE. Therefore avc3->bytstream was already supported, except for the stream type. In the case of bystream->avc h264parse will generate codec_data caps from the parsed SPS/PPS in the stream. However it does not remove these SPS/PPS from the stream. bytestream->avc3 is the same as bytestream->avc except that the codec_data must not have any SPS/PPS in it. |--------------+-------------+-------------------| |stream-format | SPS in-band | SPS in codec_data | |--------------+-------------+-------------------| | avc | maybe | always | |--------------+-------------+-------------------| | avc3 | always | never | |--------------+-------------+-------------------| Amendment 2 of ISO/IEC 14496-15 (AVC file format) is defining a new structure for fragmented MP4 called "avc3". The principal difference between AVC1 and AVC3 is the location of the codec initialisation data (e.g. SPS, PPS). In AVC1 this data is placed in the initial MOOV box (moov.trak.mdia.minf.stbl.stsd.avc1) but in AVC3 this data goes in the first sample of every fragment. https://bugzilla.gnome.org/show_bug.cgi?id=702004
2013-08-30 12:54:40 +00:00
if ((h264parse->format == GST_H264_PARSE_FORMAT_AVC
|| h264parse->format == GST_H264_PARSE_FORMAT_AVC3)
&& h264parse->align == GST_H264_PARSE_ALIGN_AU) {
buf = gst_h264_parse_make_codec_data (h264parse);
if (buf && h264parse->codec_data) {
2012-01-25 15:20:41 +00:00
GstMapInfo map;
2012-01-25 15:20:41 +00:00
gst_buffer_map (buf, &map, GST_MAP_READ);
if (map.size != gst_buffer_get_size (h264parse->codec_data) ||
gst_buffer_memcmp (h264parse->codec_data, 0, map.data, map.size))
modified = TRUE;
2012-01-25 15:20:41 +00:00
gst_buffer_unmap (buf, &map);
} else {
if (!buf && h264parse->codec_data_in)
buf = gst_buffer_ref (h264parse->codec_data_in);
modified = TRUE;
}
}
caps = NULL;
if (G_UNLIKELY (!sps)) {
caps = gst_caps_copy (sink_caps);
} else {
gint crop_width, crop_height;
gint fps_num, fps_den;
if (sps->frame_cropping_flag) {
crop_width = sps->crop_rect_width;
crop_height = sps->crop_rect_height;
} else {
crop_width = sps->width;
crop_height = sps->height;
}
if (G_UNLIKELY (h264parse->width != crop_width ||
h264parse->height != crop_height)) {
GST_INFO_OBJECT (h264parse, "resolution changed %dx%d",
crop_width, crop_height);
h264parse->width = crop_width;
h264parse->height = crop_height;
modified = TRUE;
}
/* 0/1 is set as the default in the codec parser, we will set
* it in case we have no info */
gst_h264_video_calculate_framerate (sps, h264parse->field_pic_flag,
h264parse->sei_pic_struct, &fps_num, &fps_den);
if (G_UNLIKELY (h264parse->fps_num != fps_num
|| h264parse->fps_den != fps_den)) {
GST_DEBUG_OBJECT (h264parse, "framerate changed %d/%d", fps_num, fps_den);
h264parse->fps_num = fps_num;
h264parse->fps_den = fps_den;
modified = TRUE;
}
if (sps->vui_parameters.aspect_ratio_info_present_flag) {
if (G_UNLIKELY ((h264parse->parsed_par_n != sps->vui_parameters.par_n)
|| (h264parse->parsed_par_d != sps->vui_parameters.par_d))) {
h264parse->parsed_par_n = sps->vui_parameters.par_n;
h264parse->parsed_par_d = sps->vui_parameters.par_d;
GST_INFO_OBJECT (h264parse, "pixel aspect ratio has been changed %d/%d",
h264parse->parsed_par_n, h264parse->parsed_par_d);
}
}
if (G_UNLIKELY (modified || h264parse->update_caps)) {
gint width, height;
GstClockTime latency;
fps_num = h264parse->fps_num;
fps_den = h264parse->fps_den;
caps = gst_caps_copy (sink_caps);
/* sps should give this but upstream overrides */
if (s && gst_structure_has_field (s, "width"))
gst_structure_get_int (s, "width", &width);
else
width = h264parse->width;
if (s && gst_structure_has_field (s, "height"))
gst_structure_get_int (s, "height", &height);
else
height = h264parse->height;
gst_caps_set_simple (caps, "width", G_TYPE_INT, width,
"height", G_TYPE_INT, height, NULL);
/* upstream overrides */
if (s && gst_structure_has_field (s, "framerate"))
gst_structure_get_fraction (s, "framerate", &fps_num, &fps_den);
/* but not necessarily or reliably this */
if (fps_den > 0) {
gst_caps_set_simple (caps, "framerate",
GST_TYPE_FRACTION, fps_num, fps_den, NULL);
gst_base_parse_set_frame_rate (GST_BASE_PARSE (h264parse),
fps_num, fps_den, 0, 0);
if (fps_num > 0) {
latency = gst_util_uint64_scale (GST_SECOND, fps_den, fps_num);
gst_base_parse_set_latency (GST_BASE_PARSE (h264parse), latency,
latency);
}
}
}
}
if (caps) {
gint par_n, par_d;
gst_caps_set_simple (caps, "parsed", G_TYPE_BOOLEAN, TRUE,
"stream-format", G_TYPE_STRING,
gst_h264_parse_get_string (h264parse, TRUE, h264parse->format),
"alignment", G_TYPE_STRING,
gst_h264_parse_get_string (h264parse, FALSE, h264parse->align), NULL);
gst_h264_parse_get_par (h264parse, &par_n, &par_d);
if (par_n != 0 && par_d != 0 &&
(!s || !gst_structure_has_field (s, "pixel-aspect-ratio"))) {
GST_INFO_OBJECT (h264parse, "PAR %d/%d", par_n, par_d);
gst_caps_set_simple (caps, "pixel-aspect-ratio", GST_TYPE_FRACTION,
par_n, par_d, NULL);
}
src_caps = gst_pad_get_current_caps (GST_BASE_PARSE_SRC_PAD (h264parse));
if (src_caps
&& gst_structure_has_field (gst_caps_get_structure (src_caps, 0),
"codec_data")) {
/* use codec data from old caps for comparison; we don't want to resend caps
if everything is same except codec data; */
gst_caps_set_value (caps, "codec_data",
gst_structure_get_value (gst_caps_get_structure (src_caps, 0),
"codec_data"));
}
if (!(src_caps && gst_caps_is_strictly_equal (src_caps, caps))) {
/* update codec data to new value */
if (buf) {
gst_caps_set_simple (caps, "codec_data", GST_TYPE_BUFFER, buf, NULL);
gst_buffer_replace (&h264parse->codec_data, buf);
gst_buffer_unref (buf);
buf = NULL;
} else {
GstStructure *s;
/* remove any left-over codec-data hanging around */
s = gst_caps_get_structure (caps, 0);
gst_structure_remove_field (s, "codec_data");
gst_buffer_replace (&h264parse->codec_data, NULL);
}
gst_pad_set_caps (GST_BASE_PARSE_SRC_PAD (h264parse), caps);
}
if (src_caps)
gst_caps_unref (src_caps);
gst_caps_unref (caps);
}
gst_caps_unref (sink_caps);
if (buf)
gst_buffer_unref (buf);
}
static void
gst_h264_parse_get_timestamp (GstH264Parse * h264parse,
GstClockTime * out_ts, GstClockTime * out_dur, gboolean frame)
{
GstH264SPS *sps = h264parse->nalparser->last_sps;
GstClockTime upstream;
gint duration = 1;
g_return_if_fail (out_dur != NULL);
g_return_if_fail (out_ts != NULL);
upstream = *out_ts;
if (!frame) {
GST_LOG_OBJECT (h264parse, "no frame data -> 0 duration");
*out_dur = 0;
goto exit;
} else {
*out_ts = upstream;
}
if (!sps) {
GST_DEBUG_OBJECT (h264parse, "referred SPS invalid");
goto exit;
} else if (!sps->vui_parameters_present_flag) {
GST_DEBUG_OBJECT (h264parse,
"unable to compute timestamp: VUI not present");
goto exit;
} else if (!sps->vui_parameters.timing_info_present_flag) {
GST_DEBUG_OBJECT (h264parse,
"unable to compute timestamp: timing info not present");
goto exit;
} else if (sps->vui_parameters.time_scale == 0) {
GST_DEBUG_OBJECT (h264parse,
"unable to compute timestamp: time_scale = 0 "
"(this is forbidden in spec; bitstream probably contains error)");
goto exit;
}
if (h264parse->sei_pic_struct_pres_flag &&
h264parse->sei_pic_struct != (guint8) - 1) {
/* Note that when h264parse->sei_pic_struct == -1 (unspecified), there
* are ways to infer its value. This is related to computing the
* TopFieldOrderCnt and BottomFieldOrderCnt, which looks
* complicated and thus not implemented for the time being. Yet
* the value we have here is correct for many applications
*/
switch (h264parse->sei_pic_struct) {
case GST_H264_SEI_PIC_STRUCT_TOP_FIELD:
case GST_H264_SEI_PIC_STRUCT_BOTTOM_FIELD:
duration = 1;
break;
case GST_H264_SEI_PIC_STRUCT_FRAME:
case GST_H264_SEI_PIC_STRUCT_TOP_BOTTOM:
case GST_H264_SEI_PIC_STRUCT_BOTTOM_TOP:
duration = 2;
break;
case GST_H264_SEI_PIC_STRUCT_TOP_BOTTOM_TOP:
case GST_H264_SEI_PIC_STRUCT_BOTTOM_TOP_BOTTOM:
duration = 3;
break;
case GST_H264_SEI_PIC_STRUCT_FRAME_DOUBLING:
duration = 4;
break;
case GST_H264_SEI_PIC_STRUCT_FRAME_TRIPLING:
duration = 6;
break;
default:
GST_DEBUG_OBJECT (h264parse,
"h264parse->sei_pic_struct of unknown value %d. Not parsed",
h264parse->sei_pic_struct);
break;
}
} else {
duration = h264parse->field_pic_flag ? 1 : 2;
}
GST_LOG_OBJECT (h264parse, "frame tick duration %d", duration);
/*
* h264parse.264 C.1.2 Timing of coded picture removal (equivalent to DTS):
* Tr,n(0) = initial_cpb_removal_delay[ SchedSelIdx ] / 90000
* Tr,n(n) = Tr,n(nb) + Tc * cpb_removal_delay(n)
* where
* Tc = num_units_in_tick / time_scale
*/
if (h264parse->ts_trn_nb != GST_CLOCK_TIME_NONE) {
GST_LOG_OBJECT (h264parse, "buffering based ts");
/* buffering period is present */
if (upstream != GST_CLOCK_TIME_NONE) {
/* If upstream timestamp is valid, we respect it and adjust current
* reference point */
h264parse->ts_trn_nb = upstream -
(GstClockTime) gst_util_uint64_scale_int
(h264parse->sei_cpb_removal_delay * GST_SECOND,
sps->vui_parameters.num_units_in_tick,
sps->vui_parameters.time_scale);
} else {
/* If no upstream timestamp is given, we write in new timestamp */
upstream = h264parse->dts = h264parse->ts_trn_nb +
(GstClockTime) gst_util_uint64_scale_int
(h264parse->sei_cpb_removal_delay * GST_SECOND,
sps->vui_parameters.num_units_in_tick,
sps->vui_parameters.time_scale);
}
} else {
GstClockTime dur;
GST_LOG_OBJECT (h264parse, "duration based ts");
/* naive method: no removal delay specified
* track upstream timestamp and provide best guess frame duration */
dur = gst_util_uint64_scale_int (duration * GST_SECOND,
sps->vui_parameters.num_units_in_tick, sps->vui_parameters.time_scale);
/* sanity check */
if (dur < GST_MSECOND) {
GST_DEBUG_OBJECT (h264parse, "discarding dur %" GST_TIME_FORMAT,
GST_TIME_ARGS (dur));
} else {
*out_dur = dur;
}
}
exit:
if (GST_CLOCK_TIME_IS_VALID (upstream))
*out_ts = h264parse->dts = upstream;
if (GST_CLOCK_TIME_IS_VALID (*out_dur) &&
GST_CLOCK_TIME_IS_VALID (h264parse->dts))
h264parse->dts += *out_dur;
}
static GstFlowReturn
gst_h264_parse_parse_frame (GstBaseParse * parse, GstBaseParseFrame * frame)
{
GstH264Parse *h264parse;
GstBuffer *buffer;
guint av;
h264parse = GST_H264_PARSE (parse);
buffer = frame->buffer;
gst_h264_parse_update_src_caps (h264parse, NULL);
/* don't mess with timestamps if provided by upstream,
* particularly since our ts not that good they handle seeking etc */
if (h264parse->do_ts)
gst_h264_parse_get_timestamp (h264parse,
&GST_BUFFER_TIMESTAMP (buffer), &GST_BUFFER_DURATION (buffer),
h264parse->frame_start);
if (h264parse->keyframe)
GST_BUFFER_FLAG_UNSET (buffer, GST_BUFFER_FLAG_DELTA_UNIT);
else
GST_BUFFER_FLAG_SET (buffer, GST_BUFFER_FLAG_DELTA_UNIT);
if (h264parse->discont) {
GST_BUFFER_FLAG_SET (buffer, GST_BUFFER_FLAG_DISCONT);
h264parse->discont = FALSE;
}
/* replace with transformed AVC output if applicable */
av = gst_adapter_available (h264parse->frame_out);
if (av) {
GstBuffer *buf;
buf = gst_adapter_take_buffer (h264parse->frame_out, av);
gst_buffer_copy_into (buf, buffer, GST_BUFFER_COPY_METADATA, 0, -1);
gst_buffer_replace (&frame->out_buffer, buf);
gst_buffer_unref (buf);
}
return GST_FLOW_OK;
}
/* sends a codec NAL downstream, decorating and transforming as needed.
* No ownership is taken of @nal */
static GstFlowReturn
gst_h264_parse_push_codec_buffer (GstH264Parse * h264parse,
GstBuffer * nal, GstClockTime ts)
{
2012-01-25 15:20:41 +00:00
GstMapInfo map;
2012-01-25 15:20:41 +00:00
gst_buffer_map (nal, &map, GST_MAP_READ);
nal = gst_h264_parse_wrap_nal (h264parse, h264parse->format,
map.data, map.size);
gst_buffer_unmap (nal, &map);
GST_BUFFER_TIMESTAMP (nal) = ts;
GST_BUFFER_DURATION (nal) = 0;
return gst_pad_push (GST_BASE_PARSE_SRC_PAD (h264parse), nal);
}
static GstEvent *
check_pending_key_unit_event (GstEvent * pending_event,
GstSegment * segment, GstClockTime timestamp, guint flags,
GstClockTime pending_key_unit_ts)
{
GstClockTime running_time, stream_time;
gboolean all_headers;
guint count;
GstEvent *event = NULL;
g_return_val_if_fail (segment != NULL, NULL);
if (pending_event == NULL)
goto out;
if (GST_CLOCK_TIME_IS_VALID (pending_key_unit_ts) &&
timestamp == GST_CLOCK_TIME_NONE)
goto out;
running_time = gst_segment_to_running_time (segment,
GST_FORMAT_TIME, timestamp);
GST_INFO ("now %" GST_TIME_FORMAT " wanted %" GST_TIME_FORMAT,
GST_TIME_ARGS (running_time), GST_TIME_ARGS (pending_key_unit_ts));
if (GST_CLOCK_TIME_IS_VALID (pending_key_unit_ts) &&
running_time < pending_key_unit_ts)
goto out;
if (flags & GST_BUFFER_FLAG_DELTA_UNIT) {
GST_DEBUG ("pending force key unit, waiting for keyframe");
goto out;
}
stream_time = gst_segment_to_stream_time (segment,
GST_FORMAT_TIME, timestamp);
gst_video_event_parse_upstream_force_key_unit (pending_event,
NULL, &all_headers, &count);
event =
gst_video_event_new_downstream_force_key_unit (timestamp, stream_time,
running_time, all_headers, count);
gst_event_set_seqnum (event, gst_event_get_seqnum (pending_event));
out:
return event;
}
static void
gst_h264_parse_prepare_key_unit (GstH264Parse * parse, GstEvent * event)
{
GstClockTime running_time;
guint count;
#ifndef GST_DISABLE_GST_DEBUG
gboolean have_sps, have_pps;
gint i;
#endif
parse->pending_key_unit_ts = GST_CLOCK_TIME_NONE;
gst_event_replace (&parse->force_key_unit_event, NULL);
gst_video_event_parse_downstream_force_key_unit (event,
NULL, NULL, &running_time, NULL, &count);
GST_INFO_OBJECT (parse, "pushing downstream force-key-unit event %d "
"%" GST_TIME_FORMAT " count %d", gst_event_get_seqnum (event),
GST_TIME_ARGS (running_time), count);
gst_pad_push_event (GST_BASE_PARSE_SRC_PAD (parse), event);
#ifndef GST_DISABLE_GST_DEBUG
have_sps = have_pps = FALSE;
for (i = 0; i < GST_H264_MAX_SPS_COUNT; i++) {
if (parse->sps_nals[i] != NULL) {
have_sps = TRUE;
break;
}
}
for (i = 0; i < GST_H264_MAX_PPS_COUNT; i++) {
if (parse->pps_nals[i] != NULL) {
have_pps = TRUE;
break;
}
}
GST_INFO_OBJECT (parse, "preparing key unit, have sps %d have pps %d",
have_sps, have_pps);
#endif
/* set push_codec to TRUE so that pre_push_frame sends SPS/PPS again */
parse->push_codec = TRUE;
}
static GstFlowReturn
gst_h264_parse_pre_push_frame (GstBaseParse * parse, GstBaseParseFrame * frame)
{
GstH264Parse *h264parse;
GstBuffer *buffer;
GstEvent *event;
h264parse = GST_H264_PARSE (parse);
2013-12-16 09:18:23 +00:00
if (!h264parse->sent_codec_tag) {
GstTagList *taglist;
GstCaps *caps;
taglist = gst_tag_list_new_empty ();
/* codec tag */
caps = gst_pad_get_current_caps (GST_BASE_PARSE_SRC_PAD (parse));
if (caps == NULL) {
if (GST_PAD_IS_FLUSHING (GST_BASE_PARSE_SRC_PAD (h264parse))) {
GST_INFO_OBJECT (h264parse, "Src pad is flushing");
return GST_FLOW_FLUSHING;
} else {
GST_INFO_OBJECT (h264parse, "Src pad is not negotiated!");
return GST_FLOW_NOT_NEGOTIATED;
}
}
2013-12-16 09:18:23 +00:00
gst_pb_utils_add_codec_description_to_tag_list (taglist,
GST_TAG_VIDEO_CODEC, caps);
gst_caps_unref (caps);
gst_pad_push_event (GST_BASE_PARSE_SRC_PAD (h264parse),
gst_event_new_tag (taglist));
/* also signals the end of first-frame processing */
h264parse->sent_codec_tag = TRUE;
}
buffer = frame->buffer;
if ((event = check_pending_key_unit_event (h264parse->force_key_unit_event,
&parse->segment, GST_BUFFER_TIMESTAMP (buffer),
GST_BUFFER_FLAGS (buffer), h264parse->pending_key_unit_ts))) {
gst_h264_parse_prepare_key_unit (h264parse, event);
}
/* periodic SPS/PPS sending */
if (h264parse->interval > 0 || h264parse->push_codec) {
GstClockTime timestamp = GST_BUFFER_TIMESTAMP (buffer);
guint64 diff;
/* init */
if (!GST_CLOCK_TIME_IS_VALID (h264parse->last_report)) {
h264parse->last_report = timestamp;
}
if (h264parse->idr_pos >= 0) {
GST_LOG_OBJECT (h264parse, "IDR nal at offset %d", h264parse->idr_pos);
if (timestamp > h264parse->last_report)
diff = timestamp - h264parse->last_report;
else
diff = 0;
GST_LOG_OBJECT (h264parse,
"now %" GST_TIME_FORMAT ", last SPS/PPS %" GST_TIME_FORMAT,
GST_TIME_ARGS (timestamp), GST_TIME_ARGS (h264parse->last_report));
GST_DEBUG_OBJECT (h264parse,
"interval since last SPS/PPS %" GST_TIME_FORMAT,
GST_TIME_ARGS (diff));
if (GST_TIME_AS_SECONDS (diff) >= h264parse->interval ||
h264parse->push_codec) {
GstBuffer *codec_nal;
gint i;
GstClockTime new_ts;
/* avoid overwriting a perfectly fine timestamp */
new_ts = GST_CLOCK_TIME_IS_VALID (timestamp) ? timestamp :
h264parse->last_report;
if (h264parse->align == GST_H264_PARSE_ALIGN_NAL) {
/* send separate config NAL buffers */
GST_DEBUG_OBJECT (h264parse, "- sending SPS/PPS");
for (i = 0; i < GST_H264_MAX_SPS_COUNT; i++) {
if ((codec_nal = h264parse->sps_nals[i])) {
GST_DEBUG_OBJECT (h264parse, "sending SPS nal");
gst_h264_parse_push_codec_buffer (h264parse, codec_nal,
timestamp);
h264parse->last_report = new_ts;
}
}
for (i = 0; i < GST_H264_MAX_PPS_COUNT; i++) {
if ((codec_nal = h264parse->pps_nals[i])) {
GST_DEBUG_OBJECT (h264parse, "sending PPS nal");
gst_h264_parse_push_codec_buffer (h264parse, codec_nal,
timestamp);
h264parse->last_report = new_ts;
}
}
} else {
/* insert config NALs into AU */
GstByteWriter bw;
GstBuffer *new_buf;
const gboolean bs = h264parse->format == GST_H264_PARSE_FORMAT_BYTE;
const gint nls = 4 - h264parse->nal_length_size;
gboolean ok;
gst_byte_writer_init_with_size (&bw, gst_buffer_get_size (buffer),
FALSE);
ok = gst_byte_writer_put_buffer (&bw, buffer, 0, h264parse->idr_pos);
GST_DEBUG_OBJECT (h264parse, "- inserting SPS/PPS");
for (i = 0; i < GST_H264_MAX_SPS_COUNT; i++) {
if ((codec_nal = h264parse->sps_nals[i])) {
gsize nal_size = gst_buffer_get_size (codec_nal);
GST_DEBUG_OBJECT (h264parse, "inserting SPS nal");
if (bs) {
ok &= gst_byte_writer_put_uint32_be (&bw, 1);
} else {
ok &= gst_byte_writer_put_uint32_be (&bw,
(nal_size << (nls * 8)));
ok &= gst_byte_writer_set_pos (&bw,
gst_byte_writer_get_pos (&bw) - nls);
}
ok &= gst_byte_writer_put_buffer (&bw, codec_nal, 0, nal_size);
h264parse->last_report = new_ts;
}
}
for (i = 0; i < GST_H264_MAX_PPS_COUNT; i++) {
if ((codec_nal = h264parse->pps_nals[i])) {
gsize nal_size = gst_buffer_get_size (codec_nal);
GST_DEBUG_OBJECT (h264parse, "inserting PPS nal");
if (bs) {
ok &= gst_byte_writer_put_uint32_be (&bw, 1);
} else {
ok &= gst_byte_writer_put_uint32_be (&bw,
(nal_size << (nls * 8)));
ok &= gst_byte_writer_set_pos (&bw,
gst_byte_writer_get_pos (&bw) - nls);
}
ok &= gst_byte_writer_put_buffer (&bw, codec_nal, 0, nal_size);
h264parse->last_report = new_ts;
}
}
ok &=
gst_byte_writer_put_buffer (&bw, buffer, h264parse->idr_pos, -1);
/* collect result and push */
new_buf = gst_byte_writer_reset_and_get_buffer (&bw);
gst_buffer_copy_into (new_buf, buffer, GST_BUFFER_COPY_METADATA, 0,
-1);
/* should already be keyframe/IDR, but it may not have been,
* so mark it as such to avoid being discarded by picky decoder */
GST_BUFFER_FLAG_UNSET (new_buf, GST_BUFFER_FLAG_DELTA_UNIT);
gst_buffer_replace (&frame->out_buffer, new_buf);
gst_buffer_unref (new_buf);
/* some result checking seems to make some compilers happy */
if (G_UNLIKELY (!ok)) {
GST_ERROR_OBJECT (h264parse, "failed to insert SPS/PPS");
}
}
}
/* we pushed whatever we had */
h264parse->push_codec = FALSE;
h264parse->have_sps = FALSE;
h264parse->have_pps = FALSE;
h264parse->state &= GST_H264_PARSE_STATE_VALID_PICTURE_HEADERS;
}
}
gst_h264_parse_reset_frame (h264parse);
return GST_FLOW_OK;
}
static gboolean
gst_h264_parse_set_caps (GstBaseParse * parse, GstCaps * caps)
{
GstH264Parse *h264parse;
GstStructure *str;
const GValue *codec_data_value;
GstBuffer *codec_data = NULL;
gsize size;
guint format, align, off;
GstH264NalUnit nalu;
GstH264ParserResult parseres;
h264parse = GST_H264_PARSE (parse);
/* reset */
h264parse->push_codec = FALSE;
str = gst_caps_get_structure (caps, 0);
/* accept upstream info if provided */
gst_structure_get_int (str, "width", &h264parse->width);
gst_structure_get_int (str, "height", &h264parse->height);
gst_structure_get_fraction (str, "framerate", &h264parse->fps_num,
&h264parse->fps_den);
gst_structure_get_fraction (str, "pixel-aspect-ratio",
&h264parse->upstream_par_n, &h264parse->upstream_par_d);
/* get upstream format and align from caps */
gst_h264_parse_format_from_caps (caps, &format, &align);
codec_data_value = gst_structure_get_value (str, "codec_data");
/* fix up caps without stream-format for max. backwards compatibility */
if (format == GST_H264_PARSE_FORMAT_NONE) {
/* codec_data implies avc */
if (codec_data_value != NULL) {
GST_ERROR ("video/x-h264 caps with codec_data but no stream-format=avc");
format = GST_H264_PARSE_FORMAT_AVC;
} else {
/* otherwise assume bytestream input */
GST_ERROR ("video/x-h264 caps without codec_data or stream-format");
format = GST_H264_PARSE_FORMAT_BYTE;
}
}
/* avc caps sanity checks */
if (format == GST_H264_PARSE_FORMAT_AVC) {
/* AVC requires codec_data, AVC3 might have one and/or SPS/PPS inline */
if (codec_data_value == NULL)
goto avc_caps_codec_data_missing;
/* AVC implies alignment=au, everything else is not allowed */
if (align == GST_H264_PARSE_ALIGN_NONE)
align = GST_H264_PARSE_ALIGN_AU;
else if (align != GST_H264_PARSE_ALIGN_AU)
goto avc_caps_wrong_alignment;
}
/* bytestream caps sanity checks */
if (format == GST_H264_PARSE_FORMAT_BYTE) {
/* should have SPS/PSS in-band (and/or oob in streamheader field) */
if (codec_data_value != NULL)
goto bytestream_caps_with_codec_data;
}
/* packetized video has codec_data (required for AVC, optional for AVC3) */
if (codec_data_value != NULL) {
2012-01-25 15:20:41 +00:00
GstMapInfo map;
guint8 *data;
guint num_sps, num_pps;
#ifndef GST_DISABLE_GST_DEBUG
guint profile;
#endif
gint i;
GST_DEBUG_OBJECT (h264parse, "have packetized h264");
/* make note for optional split processing */
h264parse->packetized = TRUE;
/* codec_data field should hold a buffer */
if (!GST_VALUE_HOLDS_BUFFER (codec_data_value))
goto avc_caps_codec_data_wrong_type;
codec_data = gst_value_get_buffer (codec_data_value);
if (!codec_data)
goto avc_caps_codec_data_missing;
2012-01-25 15:20:41 +00:00
gst_buffer_map (codec_data, &map, GST_MAP_READ);
data = map.data;
size = map.size;
/* parse the avcC data */
h264parse: Add support for stream-format=avc3 When outputting in AVC3 stream format, the codec_data should not contain any SPS or PPS, because they are embedded inside the stream. In case of avc->bytestream h264parse will push the SPS and PPS from codec_data downstream at the start of the stream, at intervals controlled by "config-interval" and when there is a codec_data change. In the case of avc3->bytstream h264parse detects that there is already SPS/PPS in the stream and sets h264parse->push_codec to FALSE. Therefore avc3->bytstream was already supported, except for the stream type. In the case of bystream->avc h264parse will generate codec_data caps from the parsed SPS/PPS in the stream. However it does not remove these SPS/PPS from the stream. bytestream->avc3 is the same as bytestream->avc except that the codec_data must not have any SPS/PPS in it. |--------------+-------------+-------------------| |stream-format | SPS in-band | SPS in codec_data | |--------------+-------------+-------------------| | avc | maybe | always | |--------------+-------------+-------------------| | avc3 | always | never | |--------------+-------------+-------------------| Amendment 2 of ISO/IEC 14496-15 (AVC file format) is defining a new structure for fragmented MP4 called "avc3". The principal difference between AVC1 and AVC3 is the location of the codec initialisation data (e.g. SPS, PPS). In AVC1 this data is placed in the initial MOOV box (moov.trak.mdia.minf.stbl.stsd.avc1) but in AVC3 this data goes in the first sample of every fragment. https://bugzilla.gnome.org/show_bug.cgi?id=702004
2013-08-30 12:54:40 +00:00
if (size < 7) { /* when numSPS==0 and numPPS==0, length is 7 bytes */
2012-01-25 15:20:41 +00:00
gst_buffer_unmap (codec_data, &map);
goto avcc_too_small;
}
/* parse the version, this must be 1 */
if (data[0] != 1) {
2012-01-25 15:20:41 +00:00
gst_buffer_unmap (codec_data, &map);
goto wrong_version;
}
#ifndef GST_DISABLE_GST_DEBUG
/* AVCProfileIndication */
/* profile_compat */
/* AVCLevelIndication */
profile = (data[1] << 16) | (data[2] << 8) | data[3];
GST_DEBUG_OBJECT (h264parse, "profile %06x", profile);
#endif
/* 6 bits reserved | 2 bits lengthSizeMinusOne */
/* this is the number of bytes in front of the NAL units to mark their
* length */
h264parse->nal_length_size = (data[4] & 0x03) + 1;
GST_DEBUG_OBJECT (h264parse, "nal length size %u",
h264parse->nal_length_size);
num_sps = data[5] & 0x1f;
off = 6;
for (i = 0; i < num_sps; i++) {
parseres = gst_h264_parser_identify_nalu_avc (h264parse->nalparser,
data, off, size, 2, &nalu);
if (parseres != GST_H264_PARSER_OK) {
2012-01-25 15:20:41 +00:00
gst_buffer_unmap (codec_data, &map);
goto avcc_too_small;
}
gst_h264_parse_process_nal (h264parse, &nalu);
off = nalu.offset + nalu.size;
}
num_pps = data[off];
off++;
for (i = 0; i < num_pps; i++) {
parseres = gst_h264_parser_identify_nalu_avc (h264parse->nalparser,
data, off, size, 2, &nalu);
if (parseres != GST_H264_PARSER_OK) {
2012-01-25 15:20:41 +00:00
gst_buffer_unmap (codec_data, &map);
goto avcc_too_small;
}
gst_h264_parse_process_nal (h264parse, &nalu);
off = nalu.offset + nalu.size;
}
2012-01-25 15:20:41 +00:00
gst_buffer_unmap (codec_data, &map);
gst_buffer_replace (&h264parse->codec_data_in, codec_data);
} else if (format == GST_H264_PARSE_FORMAT_BYTE) {
GST_DEBUG_OBJECT (h264parse, "have bytestream h264");
/* nothing to pre-process */
h264parse->packetized = FALSE;
/* we have 4 sync bytes */
h264parse->nal_length_size = 4;
if (format == GST_H264_PARSE_FORMAT_NONE) {
format = GST_H264_PARSE_FORMAT_BYTE;
align = GST_H264_PARSE_ALIGN_AU;
}
} else {
/* probably AVC3 without codec_data field, anything to do here? */
}
{
GstCaps *in_caps;
/* prefer input type determined above */
in_caps = gst_caps_new_simple ("video/x-h264",
"parsed", G_TYPE_BOOLEAN, TRUE,
"stream-format", G_TYPE_STRING,
gst_h264_parse_get_string (h264parse, TRUE, format),
"alignment", G_TYPE_STRING,
gst_h264_parse_get_string (h264parse, FALSE, align), NULL);
/* negotiate with downstream, sets ->format and ->align */
gst_h264_parse_negotiate (h264parse, format, in_caps);
gst_caps_unref (in_caps);
}
if (format == h264parse->format && align == h264parse->align) {
/* do not set CAPS and passthrough mode if SPS/PPS have not been parsed */
if (h264parse->have_sps && h264parse->have_pps) {
gst_base_parse_set_passthrough (parse, TRUE);
/* we did parse codec-data and might supplement src caps */
gst_h264_parse_update_src_caps (h264parse, caps);
}
h264parse: Add support for stream-format=avc3 When outputting in AVC3 stream format, the codec_data should not contain any SPS or PPS, because they are embedded inside the stream. In case of avc->bytestream h264parse will push the SPS and PPS from codec_data downstream at the start of the stream, at intervals controlled by "config-interval" and when there is a codec_data change. In the case of avc3->bytstream h264parse detects that there is already SPS/PPS in the stream and sets h264parse->push_codec to FALSE. Therefore avc3->bytstream was already supported, except for the stream type. In the case of bystream->avc h264parse will generate codec_data caps from the parsed SPS/PPS in the stream. However it does not remove these SPS/PPS from the stream. bytestream->avc3 is the same as bytestream->avc except that the codec_data must not have any SPS/PPS in it. |--------------+-------------+-------------------| |stream-format | SPS in-band | SPS in codec_data | |--------------+-------------+-------------------| | avc | maybe | always | |--------------+-------------+-------------------| | avc3 | always | never | |--------------+-------------+-------------------| Amendment 2 of ISO/IEC 14496-15 (AVC file format) is defining a new structure for fragmented MP4 called "avc3". The principal difference between AVC1 and AVC3 is the location of the codec initialisation data (e.g. SPS, PPS). In AVC1 this data is placed in the initial MOOV box (moov.trak.mdia.minf.stbl.stsd.avc1) but in AVC3 this data goes in the first sample of every fragment. https://bugzilla.gnome.org/show_bug.cgi?id=702004
2013-08-30 12:54:40 +00:00
} else if (format == GST_H264_PARSE_FORMAT_AVC
|| format == GST_H264_PARSE_FORMAT_AVC3) {
/* if input != output, and input is avc, must split before anything else */
/* arrange to insert codec-data in-stream if needed.
* src caps are only arranged for later on */
h264parse->push_codec = TRUE;
h264parse->have_sps = FALSE;
h264parse->have_pps = FALSE;
if (h264parse->align == GST_H264_PARSE_ALIGN_NAL)
h264parse->split_packetized = TRUE;
h264parse->packetized = TRUE;
}
return TRUE;
/* ERRORS */
avc_caps_codec_data_wrong_type:
{
GST_WARNING_OBJECT (parse, "H.264 AVC caps, codec_data field not a buffer");
goto refuse_caps;
}
avc_caps_codec_data_missing:
{
GST_WARNING_OBJECT (parse, "H.264 AVC caps, but no codec_data");
goto refuse_caps;
}
avc_caps_wrong_alignment:
{
GST_WARNING_OBJECT (parse, "H.264 AVC caps with NAL alignment, must be AU");
goto refuse_caps;
}
bytestream_caps_with_codec_data:
{
GST_WARNING_OBJECT (parse, "H.264 bytestream caps with codec_data is not "
"expected, send SPS/PPS in-band with data or in streamheader field");
goto refuse_caps;
}
avcc_too_small:
{
GST_DEBUG_OBJECT (h264parse, "avcC size %" G_GSIZE_FORMAT " < 8", size);
goto refuse_caps;
}
wrong_version:
{
GST_DEBUG_OBJECT (h264parse, "wrong avcC version");
goto refuse_caps;
}
refuse_caps:
{
GST_WARNING_OBJECT (h264parse, "refused caps %" GST_PTR_FORMAT, caps);
return FALSE;
}
}
static void
remove_fields (GstCaps * caps)
{
guint i, n;
n = gst_caps_get_size (caps);
for (i = 0; i < n; i++) {
GstStructure *s = gst_caps_get_structure (caps, i);
gst_structure_remove_field (s, "alignment");
gst_structure_remove_field (s, "stream-format");
gst_structure_remove_field (s, "parsed");
}
}
static GstCaps *
gst_h264_parse_get_caps (GstBaseParse * parse, GstCaps * filter)
{
GstCaps *peercaps, *templ;
GstCaps *res;
templ = gst_pad_get_pad_template_caps (GST_BASE_PARSE_SINK_PAD (parse));
if (filter) {
GstCaps *fcopy = gst_caps_copy (filter);
/* Remove the fields we convert */
remove_fields (fcopy);
peercaps = gst_pad_peer_query_caps (GST_BASE_PARSE_SRC_PAD (parse), fcopy);
gst_caps_unref (fcopy);
} else
peercaps = gst_pad_peer_query_caps (GST_BASE_PARSE_SRC_PAD (parse), NULL);
if (peercaps) {
peercaps = gst_caps_make_writable (peercaps);
remove_fields (peercaps);
res = gst_caps_intersect_full (peercaps, templ, GST_CAPS_INTERSECT_FIRST);
gst_caps_unref (peercaps);
gst_caps_unref (templ);
} else {
res = templ;
}
if (filter) {
GstCaps *tmp = gst_caps_intersect_full (res, filter,
GST_CAPS_INTERSECT_FIRST);
gst_caps_unref (res);
res = tmp;
}
return res;
}
static gboolean
gst_h264_parse_event (GstBaseParse * parse, GstEvent * event)
{
gboolean res;
GstH264Parse *h264parse = GST_H264_PARSE (parse);
switch (GST_EVENT_TYPE (event)) {
case GST_EVENT_CUSTOM_DOWNSTREAM:
{
GstClockTime timestamp, stream_time, running_time;
gboolean all_headers;
guint count;
if (gst_video_event_is_force_key_unit (event)) {
gst_video_event_parse_downstream_force_key_unit (event,
&timestamp, &stream_time, &running_time, &all_headers, &count);
GST_INFO_OBJECT (h264parse,
"received downstream force key unit event, "
"seqnum %d running_time %" GST_TIME_FORMAT
" all_headers %d count %d", gst_event_get_seqnum (event),
GST_TIME_ARGS (running_time), all_headers, count);
if (h264parse->force_key_unit_event) {
GST_INFO_OBJECT (h264parse, "ignoring force key unit event "
"as one is already queued");
} else {
h264parse->pending_key_unit_ts = running_time;
gst_event_replace (&h264parse->force_key_unit_event, event);
}
gst_event_unref (event);
res = TRUE;
} else {
res = GST_BASE_PARSE_CLASS (parent_class)->sink_event (parse, event);
break;
}
break;
}
case GST_EVENT_FLUSH_STOP:
h264parse->dts = GST_CLOCK_TIME_NONE;
h264parse->ts_trn_nb = GST_CLOCK_TIME_NONE;
res = GST_BASE_PARSE_CLASS (parent_class)->sink_event (parse, event);
break;
case GST_EVENT_SEGMENT:
{
const GstSegment *segment;
gst_event_parse_segment (event, &segment);
/* don't try to mess with more subtle cases (e.g. seek) */
if (segment->format == GST_FORMAT_TIME &&
(segment->start != 0 || segment->rate != 1.0
|| segment->applied_rate != 1.0))
h264parse->do_ts = FALSE;
res = GST_BASE_PARSE_CLASS (parent_class)->sink_event (parse, event);
break;
}
default:
res = GST_BASE_PARSE_CLASS (parent_class)->sink_event (parse, event);
break;
}
return res;
}
static gboolean
gst_h264_parse_src_event (GstBaseParse * parse, GstEvent * event)
{
gboolean res;
GstH264Parse *h264parse = GST_H264_PARSE (parse);
switch (GST_EVENT_TYPE (event)) {
case GST_EVENT_CUSTOM_UPSTREAM:
{
GstClockTime running_time;
gboolean all_headers;
guint count;
if (gst_video_event_is_force_key_unit (event)) {
gst_video_event_parse_upstream_force_key_unit (event,
&running_time, &all_headers, &count);
GST_INFO_OBJECT (h264parse, "received upstream force-key-unit event, "
"seqnum %d running_time %" GST_TIME_FORMAT
" all_headers %d count %d", gst_event_get_seqnum (event),
GST_TIME_ARGS (running_time), all_headers, count);
if (all_headers) {
h264parse->pending_key_unit_ts = running_time;
gst_event_replace (&h264parse->force_key_unit_event, event);
}
}
res = GST_BASE_PARSE_CLASS (parent_class)->src_event (parse, event);
break;
}
default:
res = GST_BASE_PARSE_CLASS (parent_class)->src_event (parse, event);
break;
}
return res;
}
static void
gst_h264_parse_set_property (GObject * object, guint prop_id,
const GValue * value, GParamSpec * pspec)
{
GstH264Parse *parse;
parse = GST_H264_PARSE (object);
switch (prop_id) {
case PROP_CONFIG_INTERVAL:
parse->interval = g_value_get_uint (value);
break;
default:
G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
break;
}
}
static void
gst_h264_parse_get_property (GObject * object, guint prop_id,
GValue * value, GParamSpec * pspec)
{
GstH264Parse *parse;
parse = GST_H264_PARSE (object);
switch (prop_id) {
case PROP_CONFIG_INTERVAL:
g_value_set_uint (value, parse->interval);
break;
default:
G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
break;
}
}