gstreamer/gst/gsttask.c

861 lines
22 KiB
C
Raw Normal View History

/* GStreamer
* Copyright (C) 1999,2000 Erik Walthinsen <omega@cse.ogi.edu>
* 2005 Wim Taymans <wim@fluendo.com>
*
* gsttask.c: Streaming tasks
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the
* Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
* Boston, MA 02110-1301, USA.
*/
/**
* SECTION:gsttask
* @title: GstTask
* @short_description: Abstraction of GStreamer streaming threads.
* @see_also: #GstElement, #GstPad
*
* #GstTask is used by #GstElement and #GstPad to provide the data passing
* threads in a #GstPipeline.
*
* A #GstPad will typically start a #GstTask to push or pull data to/from the
* peer pads. Most source elements start a #GstTask to push data. In some cases
* a demuxer element can start a #GstTask to pull data from a peer element. This
* is typically done when the demuxer can perform random access on the upstream
* peer element for improved performance.
*
* Although convenience functions exist on #GstPad to start/pause/stop tasks, it
* might sometimes be needed to create a #GstTask manually if it is not related to
* a #GstPad.
*
* Before the #GstTask can be run, it needs a #GRecMutex that can be set with
* gst_task_set_lock().
*
* The task can be started, paused and stopped with gst_task_start(), gst_task_pause()
2009-04-21 15:53:07 +00:00
* and gst_task_stop() respectively or with the gst_task_set_state() function.
*
* A #GstTask will repeatedly call the #GstTaskFunction with the user data
* that was provided when creating the task with gst_task_new(). While calling
2009-04-21 15:53:07 +00:00
* the function it will acquire the provided lock. The provided lock is released
* when the task pauses or stops.
*
* Stopping a task with gst_task_stop() will not immediately make sure the task is
* not running anymore. Use gst_task_join() to make sure the task is completely
* stopped and the thread is stopped.
*
* After creating a #GstTask, use gst_object_unref() to free its resources. This can
2012-03-29 11:34:50 +00:00
* only be done when the task is not running anymore.
*
* Task functions can send a #GstMessage to send out-of-band data to the
* application. The application can receive messages from the #GstBus in its
* mainloop.
*
2012-03-29 11:34:50 +00:00
* For debugging purposes, the task will configure its object name as the thread
2010-03-15 14:07:35 +00:00
* name on Linux. Please note that the object name should be configured before the
* task is started; changing the object name after the task has been started, has
* no effect on the thread name.
*/
#include "gst_private.h"
#include "gstinfo.h"
#include "gsttask.h"
#include "glib-compat-private.h"
#include <stdio.h>
#ifdef HAVE_SYS_PRCTL_H
#include <sys/prctl.h>
#endif
#ifdef HAVE_PTHREAD_SETNAME_NP_WITHOUT_TID
#include <pthread.h>
#endif
GST_DEBUG_CATEGORY_STATIC (task_debug);
#define GST_CAT_DEFAULT (task_debug)
#define SET_TASK_STATE(t,s) (g_atomic_int_set (&GST_TASK_STATE(t), (s)))
#define GET_TASK_STATE(t) ((GstTaskState) g_atomic_int_get (&GST_TASK_STATE(t)))
#define GST_TASK_GET_PRIVATE(obj) \
(G_TYPE_INSTANCE_GET_PRIVATE ((obj), GST_TYPE_TASK, GstTaskPrivate))
struct _GstTaskPrivate
{
/* callbacks for managing the thread of this task */
GstTaskThreadFunc enter_func;
gpointer enter_user_data;
GDestroyNotify enter_notify;
GstTaskThreadFunc leave_func;
gpointer leave_user_data;
GDestroyNotify leave_notify;
/* configured pool */
GstTaskPool *pool;
/* remember the pool and id that is currently running. */
gpointer id;
GstTaskPool *pool_id;
};
#ifdef _MSC_VER
#define WIN32_LEAN_AND_MEAN
#include <windows.h>
struct _THREADNAME_INFO
{
DWORD dwType; // must be 0x1000
LPCSTR szName; // pointer to name (in user addr space)
DWORD dwThreadID; // thread ID (-1=caller thread)
DWORD dwFlags; // reserved for future use, must be zero
};
typedef struct _THREADNAME_INFO THREADNAME_INFO;
void
SetThreadName (DWORD dwThreadID, LPCSTR szThreadName)
{
THREADNAME_INFO info;
info.dwType = 0x1000;
info.szName = szThreadName;
info.dwThreadID = dwThreadID;
info.dwFlags = 0;
__try {
RaiseException (0x406D1388, 0, sizeof (info) / sizeof (DWORD),
(const ULONG_PTR *) &info);
}
__except (EXCEPTION_CONTINUE_EXECUTION) {
}
}
#endif
static void gst_task_finalize (GObject * object);
static void gst_task_func (GstTask * task);
static GMutex pool_lock;
#define _do_init \
{ \
GST_DEBUG_CATEGORY_INIT (task_debug, "task", 0, "Processing tasks"); \
}
G_DEFINE_TYPE_WITH_CODE (GstTask, gst_task, GST_TYPE_OBJECT, _do_init);
static void
init_klass_pool (GstTaskClass * klass)
{
g_mutex_lock (&pool_lock);
if (klass->pool) {
gst_task_pool_cleanup (klass->pool);
gst_object_unref (klass->pool);
}
klass->pool = gst_task_pool_new ();
/* Classes are never destroyed so this ref will never be dropped */
GST_OBJECT_FLAG_SET (klass->pool, GST_OBJECT_FLAG_MAY_BE_LEAKED);
gst_task_pool_prepare (klass->pool, NULL);
g_mutex_unlock (&pool_lock);
}
static void
gst_task_class_init (GstTaskClass * klass)
{
GObjectClass *gobject_class;
gobject_class = (GObjectClass *) klass;
g_type_class_add_private (klass, sizeof (GstTaskPrivate));
gobject_class->finalize = gst_task_finalize;
init_klass_pool (klass);
}
static void
gst_task_init (GstTask * task)
{
GstTaskClass *klass;
klass = GST_TASK_GET_CLASS (task);
task->priv = GST_TASK_GET_PRIVATE (task);
task->running = FALSE;
task->thread = NULL;
gst/: Implement gst_pad_pause/start/stop_task(), take STREAM lock in task function. Original commit message from CVS: * gst/base/gstadapter.c: (gst_adapter_peek), (gst_adapter_flush): * gst/base/gstbasesink.c: (gst_basesink_preroll_queue_push), (gst_basesink_finish_preroll), (gst_basesink_chain), (gst_basesink_loop), (gst_basesink_activate), (gst_basesink_change_state): * gst/base/gstbasesrc.c: (gst_basesrc_do_seek), (gst_basesrc_get_range), (gst_basesrc_loop), (gst_basesrc_activate): * gst/elements/gsttee.c: (gst_tee_sink_activate): * gst/gstpad.c: (gst_pad_dispose), (gst_real_pad_class_init), (gst_real_pad_init), (gst_real_pad_set_property), (gst_real_pad_get_property), (gst_pad_set_active), (gst_pad_is_active), (gst_pad_get_query_types), (gst_pad_unlink), (gst_pad_link_prepare), (gst_pad_link), (gst_pad_get_real_parent), (gst_real_pad_get_caps_unlocked), (gst_pad_peer_get_caps), (gst_pad_accept_caps), (gst_pad_get_peer), (gst_pad_realize), (gst_pad_event_default_dispatch), (gst_pad_event_default), (gst_pad_dispatcher), (gst_pad_query), (gst_real_pad_dispose), (gst_pad_save_thyself), (handle_pad_block), (gst_pad_chain), (gst_pad_push), (gst_pad_get_range), (gst_pad_pull_range), (gst_pad_send_event), (gst_pad_start_task), (gst_pad_pause_task), (gst_pad_stop_task): * gst/gstpad.h: * gst/gstqueue.c: (gst_queue_handle_sink_event), (gst_queue_chain), (gst_queue_loop), (gst_queue_src_activate): * gst/gsttask.c: (gst_task_init), (gst_task_set_lock), (gst_task_get_state): * gst/gsttask.h: * gst/schedulers/threadscheduler.c: (gst_thread_scheduler_task_start), (gst_thread_scheduler_func): Implement gst_pad_pause/start/stop_task(), take STREAM lock in task function. Remove ACTIVE pad flag, use FLUSHING everywhere Added _pad_chain(), _pad_get_range() to call chain/getrange functions. Add locks around IS_FLUSHING when reading. Take STREAM lock in chain(), get_range() functions so plugins don't need to take it anymore.
2005-05-25 11:50:11 +00:00
task->lock = NULL;
2012-01-19 08:27:04 +00:00
g_cond_init (&task->cond);
SET_TASK_STATE (task, GST_TASK_STOPPED);
/* use the default klass pool for this task, users can
* override this later */
g_mutex_lock (&pool_lock);
task->priv->pool = gst_object_ref (klass->pool);
g_mutex_unlock (&pool_lock);
/* clear floating flag */
gst_object_ref_sink (task);
}
static void
gst_task_finalize (GObject * object)
{
GstTask *task = GST_TASK (object);
GstTaskPrivate *priv = task->priv;
GST_DEBUG ("task %p finalize", task);
if (priv->enter_notify)
priv->enter_notify (priv->enter_user_data);
if (priv->leave_notify)
priv->leave_notify (priv->leave_user_data);
if (task->notify)
task->notify (task->user_data);
gst_object_unref (priv->pool);
/* task thread cannot be running here since it holds a ref
* to the task so that the finalize could not have happened */
2012-01-19 08:27:04 +00:00
g_cond_clear (&task->cond);
G_OBJECT_CLASS (gst_task_parent_class)->finalize (object);
}
/* should be called with the object LOCK */
static void
gst_task_configure_name (GstTask * task)
{
#if defined(HAVE_SYS_PRCTL_H) && defined(PR_SET_NAME)
const gchar *name;
gchar thread_name[17] = { 0, };
GST_OBJECT_LOCK (task);
name = GST_OBJECT_NAME (task);
/* set the thread name to something easily identifiable */
if (!snprintf (thread_name, 17, "%s", GST_STR_NULL (name))) {
GST_DEBUG_OBJECT (task, "Could not create thread name for '%s'", name);
} else {
GST_DEBUG_OBJECT (task, "Setting thread name to '%s'", thread_name);
if (prctl (PR_SET_NAME, (unsigned long int) thread_name, 0, 0, 0))
GST_DEBUG_OBJECT (task, "Failed to set thread name");
}
GST_OBJECT_UNLOCK (task);
#elif defined(HAVE_PTHREAD_SETNAME_NP_WITHOUT_TID)
const gchar *name;
GST_OBJECT_LOCK (task);
name = GST_OBJECT_NAME (task);
/* set the thread name to something easily identifiable */
GST_DEBUG_OBJECT (task, "Setting thread name to '%s'", name);
if (pthread_setname_np (name))
GST_DEBUG_OBJECT (task, "Failed to set thread name");
GST_OBJECT_UNLOCK (task);
#elif defined (_MSC_VER)
const gchar *name;
name = GST_OBJECT_NAME (task);
/* set the thread name to something easily identifiable */
GST_DEBUG_OBJECT (task, "Setting thread name to '%s'", name);
SetThreadName (-1, name);
#endif
}
static void
gst_task_func (GstTask * task)
{
2012-01-19 08:27:04 +00:00
GRecMutex *lock;
GThread *tself;
GstTaskPrivate *priv;
priv = task->priv;
tself = g_thread_self ();
GST_DEBUG ("Entering task %p, thread %p", task, tself);
/* we have to grab the lock to get the mutex. We also
* mark our state running so that nobody can mess with
* the mutex. */
GST_OBJECT_LOCK (task);
if (GET_TASK_STATE (task) == GST_TASK_STOPPED)
goto exit;
lock = GST_TASK_GET_LOCK (task);
if (G_UNLIKELY (lock == NULL))
goto no_lock;
task->thread = tself;
GST_OBJECT_UNLOCK (task);
/* fire the enter_func callback when we need to */
if (priv->enter_func)
priv->enter_func (task, tself, priv->enter_user_data);
/* locking order is TASK_LOCK, LOCK */
2012-01-19 08:27:04 +00:00
g_rec_mutex_lock (lock);
/* configure the thread name now */
gst_task_configure_name (task);
while (G_LIKELY (GET_TASK_STATE (task) != GST_TASK_STOPPED)) {
GST_OBJECT_LOCK (task);
while (G_UNLIKELY (GST_TASK_STATE (task) == GST_TASK_PAUSED)) {
g_rec_mutex_unlock (lock);
GST_TASK_SIGNAL (task);
GST_INFO_OBJECT (task, "Task going to paused");
GST_TASK_WAIT (task);
GST_INFO_OBJECT (task, "Task resume from paused");
GST_OBJECT_UNLOCK (task);
/* locking order.. */
g_rec_mutex_lock (lock);
GST_OBJECT_LOCK (task);
}
if (G_UNLIKELY (GET_TASK_STATE (task) == GST_TASK_STOPPED)) {
GST_OBJECT_UNLOCK (task);
break;
} else {
GST_OBJECT_UNLOCK (task);
}
task->func (task->user_data);
}
2012-01-19 08:27:04 +00:00
g_rec_mutex_unlock (lock);
GST_OBJECT_LOCK (task);
task->thread = NULL;
exit:
if (priv->leave_func) {
/* fire the leave_func callback when we need to. We need to do this before
* we signal the task and with the task lock released. */
GST_OBJECT_UNLOCK (task);
priv->leave_func (task, tself, priv->leave_user_data);
GST_OBJECT_LOCK (task);
}
/* now we allow messing with the lock again by setting the running flag to
* %FALSE. Together with the SIGNAL this is the sign for the _join() to
* complete.
* Note that we still have not dropped the final ref on the task. We could
* check here if there is a pending join() going on and drop the last ref
* before releasing the lock as we can be sure that a ref is held by the
* caller of the join(). */
task->running = FALSE;
GST_TASK_SIGNAL (task);
GST_OBJECT_UNLOCK (task);
GST_DEBUG ("Exit task %p, thread %p", task, g_thread_self ());
gst_object_unref (task);
return;
no_lock:
{
g_warning ("starting task without a lock");
goto exit;
}
}
/**
* gst_task_cleanup_all:
*
* Wait for all tasks to be stopped. This is mainly used internally
* to ensure proper cleanup of internal data structures in test suites.
*
* MT safe.
*/
void
gst_task_cleanup_all (void)
{
GstTaskClass *klass;
if ((klass = g_type_class_peek (GST_TYPE_TASK))) {
init_klass_pool (klass);
}
/* GstElement owns a GThreadPool */
_priv_gst_element_cleanup ();
}
/**
* gst_task_new:
* @func: The #GstTaskFunction to use
* @user_data: User data to pass to @func
* @notify: the function to call when @user_data is no longer needed.
*
* Create a new Task that will repeatedly call the provided @func
* with @user_data as a parameter. Typically the task will run in
* a new thread.
*
* The function cannot be changed after the task has been created. You
* must create a new #GstTask to change the function.
*
* This function will not yet create and start a thread. Use gst_task_start() or
* gst_task_pause() to create and start the GThread.
*
* Before the task can be used, a #GRecMutex must be configured using the
* gst_task_set_lock() function. This lock will always be acquired while
* @func is called.
*
* Returns: (transfer full): A new #GstTask.
*
* MT safe.
*/
GstTask *
gst_task_new (GstTaskFunction func, gpointer user_data, GDestroyNotify notify)
{
GstTask *task;
g_return_val_if_fail (func != NULL, NULL);
task = g_object_new (GST_TYPE_TASK, NULL);
task->func = func;
task->user_data = user_data;
task->notify = notify;
GST_DEBUG ("Created task %p", task);
return task;
}
gst/: Implement gst_pad_pause/start/stop_task(), take STREAM lock in task function. Original commit message from CVS: * gst/base/gstadapter.c: (gst_adapter_peek), (gst_adapter_flush): * gst/base/gstbasesink.c: (gst_basesink_preroll_queue_push), (gst_basesink_finish_preroll), (gst_basesink_chain), (gst_basesink_loop), (gst_basesink_activate), (gst_basesink_change_state): * gst/base/gstbasesrc.c: (gst_basesrc_do_seek), (gst_basesrc_get_range), (gst_basesrc_loop), (gst_basesrc_activate): * gst/elements/gsttee.c: (gst_tee_sink_activate): * gst/gstpad.c: (gst_pad_dispose), (gst_real_pad_class_init), (gst_real_pad_init), (gst_real_pad_set_property), (gst_real_pad_get_property), (gst_pad_set_active), (gst_pad_is_active), (gst_pad_get_query_types), (gst_pad_unlink), (gst_pad_link_prepare), (gst_pad_link), (gst_pad_get_real_parent), (gst_real_pad_get_caps_unlocked), (gst_pad_peer_get_caps), (gst_pad_accept_caps), (gst_pad_get_peer), (gst_pad_realize), (gst_pad_event_default_dispatch), (gst_pad_event_default), (gst_pad_dispatcher), (gst_pad_query), (gst_real_pad_dispose), (gst_pad_save_thyself), (handle_pad_block), (gst_pad_chain), (gst_pad_push), (gst_pad_get_range), (gst_pad_pull_range), (gst_pad_send_event), (gst_pad_start_task), (gst_pad_pause_task), (gst_pad_stop_task): * gst/gstpad.h: * gst/gstqueue.c: (gst_queue_handle_sink_event), (gst_queue_chain), (gst_queue_loop), (gst_queue_src_activate): * gst/gsttask.c: (gst_task_init), (gst_task_set_lock), (gst_task_get_state): * gst/gsttask.h: * gst/schedulers/threadscheduler.c: (gst_thread_scheduler_task_start), (gst_thread_scheduler_func): Implement gst_pad_pause/start/stop_task(), take STREAM lock in task function. Remove ACTIVE pad flag, use FLUSHING everywhere Added _pad_chain(), _pad_get_range() to call chain/getrange functions. Add locks around IS_FLUSHING when reading. Take STREAM lock in chain(), get_range() functions so plugins don't need to take it anymore.
2005-05-25 11:50:11 +00:00
/**
* gst_task_set_lock:
* @task: The #GstTask to use
2012-01-19 08:27:04 +00:00
* @mutex: The #GRecMutex to use
gst/: Implement gst_pad_pause/start/stop_task(), take STREAM lock in task function. Original commit message from CVS: * gst/base/gstadapter.c: (gst_adapter_peek), (gst_adapter_flush): * gst/base/gstbasesink.c: (gst_basesink_preroll_queue_push), (gst_basesink_finish_preroll), (gst_basesink_chain), (gst_basesink_loop), (gst_basesink_activate), (gst_basesink_change_state): * gst/base/gstbasesrc.c: (gst_basesrc_do_seek), (gst_basesrc_get_range), (gst_basesrc_loop), (gst_basesrc_activate): * gst/elements/gsttee.c: (gst_tee_sink_activate): * gst/gstpad.c: (gst_pad_dispose), (gst_real_pad_class_init), (gst_real_pad_init), (gst_real_pad_set_property), (gst_real_pad_get_property), (gst_pad_set_active), (gst_pad_is_active), (gst_pad_get_query_types), (gst_pad_unlink), (gst_pad_link_prepare), (gst_pad_link), (gst_pad_get_real_parent), (gst_real_pad_get_caps_unlocked), (gst_pad_peer_get_caps), (gst_pad_accept_caps), (gst_pad_get_peer), (gst_pad_realize), (gst_pad_event_default_dispatch), (gst_pad_event_default), (gst_pad_dispatcher), (gst_pad_query), (gst_real_pad_dispose), (gst_pad_save_thyself), (handle_pad_block), (gst_pad_chain), (gst_pad_push), (gst_pad_get_range), (gst_pad_pull_range), (gst_pad_send_event), (gst_pad_start_task), (gst_pad_pause_task), (gst_pad_stop_task): * gst/gstpad.h: * gst/gstqueue.c: (gst_queue_handle_sink_event), (gst_queue_chain), (gst_queue_loop), (gst_queue_src_activate): * gst/gsttask.c: (gst_task_init), (gst_task_set_lock), (gst_task_get_state): * gst/gsttask.h: * gst/schedulers/threadscheduler.c: (gst_thread_scheduler_task_start), (gst_thread_scheduler_func): Implement gst_pad_pause/start/stop_task(), take STREAM lock in task function. Remove ACTIVE pad flag, use FLUSHING everywhere Added _pad_chain(), _pad_get_range() to call chain/getrange functions. Add locks around IS_FLUSHING when reading. Take STREAM lock in chain(), get_range() functions so plugins don't need to take it anymore.
2005-05-25 11:50:11 +00:00
*
* Set the mutex used by the task. The mutex will be acquired before
* calling the #GstTaskFunction.
gst/: Implement gst_pad_pause/start/stop_task(), take STREAM lock in task function. Original commit message from CVS: * gst/base/gstadapter.c: (gst_adapter_peek), (gst_adapter_flush): * gst/base/gstbasesink.c: (gst_basesink_preroll_queue_push), (gst_basesink_finish_preroll), (gst_basesink_chain), (gst_basesink_loop), (gst_basesink_activate), (gst_basesink_change_state): * gst/base/gstbasesrc.c: (gst_basesrc_do_seek), (gst_basesrc_get_range), (gst_basesrc_loop), (gst_basesrc_activate): * gst/elements/gsttee.c: (gst_tee_sink_activate): * gst/gstpad.c: (gst_pad_dispose), (gst_real_pad_class_init), (gst_real_pad_init), (gst_real_pad_set_property), (gst_real_pad_get_property), (gst_pad_set_active), (gst_pad_is_active), (gst_pad_get_query_types), (gst_pad_unlink), (gst_pad_link_prepare), (gst_pad_link), (gst_pad_get_real_parent), (gst_real_pad_get_caps_unlocked), (gst_pad_peer_get_caps), (gst_pad_accept_caps), (gst_pad_get_peer), (gst_pad_realize), (gst_pad_event_default_dispatch), (gst_pad_event_default), (gst_pad_dispatcher), (gst_pad_query), (gst_real_pad_dispose), (gst_pad_save_thyself), (handle_pad_block), (gst_pad_chain), (gst_pad_push), (gst_pad_get_range), (gst_pad_pull_range), (gst_pad_send_event), (gst_pad_start_task), (gst_pad_pause_task), (gst_pad_stop_task): * gst/gstpad.h: * gst/gstqueue.c: (gst_queue_handle_sink_event), (gst_queue_chain), (gst_queue_loop), (gst_queue_src_activate): * gst/gsttask.c: (gst_task_init), (gst_task_set_lock), (gst_task_get_state): * gst/gsttask.h: * gst/schedulers/threadscheduler.c: (gst_thread_scheduler_task_start), (gst_thread_scheduler_func): Implement gst_pad_pause/start/stop_task(), take STREAM lock in task function. Remove ACTIVE pad flag, use FLUSHING everywhere Added _pad_chain(), _pad_get_range() to call chain/getrange functions. Add locks around IS_FLUSHING when reading. Take STREAM lock in chain(), get_range() functions so plugins don't need to take it anymore.
2005-05-25 11:50:11 +00:00
*
* This function has to be called before calling gst_task_pause() or
* gst_task_start().
*
gst/: Implement gst_pad_pause/start/stop_task(), take STREAM lock in task function. Original commit message from CVS: * gst/base/gstadapter.c: (gst_adapter_peek), (gst_adapter_flush): * gst/base/gstbasesink.c: (gst_basesink_preroll_queue_push), (gst_basesink_finish_preroll), (gst_basesink_chain), (gst_basesink_loop), (gst_basesink_activate), (gst_basesink_change_state): * gst/base/gstbasesrc.c: (gst_basesrc_do_seek), (gst_basesrc_get_range), (gst_basesrc_loop), (gst_basesrc_activate): * gst/elements/gsttee.c: (gst_tee_sink_activate): * gst/gstpad.c: (gst_pad_dispose), (gst_real_pad_class_init), (gst_real_pad_init), (gst_real_pad_set_property), (gst_real_pad_get_property), (gst_pad_set_active), (gst_pad_is_active), (gst_pad_get_query_types), (gst_pad_unlink), (gst_pad_link_prepare), (gst_pad_link), (gst_pad_get_real_parent), (gst_real_pad_get_caps_unlocked), (gst_pad_peer_get_caps), (gst_pad_accept_caps), (gst_pad_get_peer), (gst_pad_realize), (gst_pad_event_default_dispatch), (gst_pad_event_default), (gst_pad_dispatcher), (gst_pad_query), (gst_real_pad_dispose), (gst_pad_save_thyself), (handle_pad_block), (gst_pad_chain), (gst_pad_push), (gst_pad_get_range), (gst_pad_pull_range), (gst_pad_send_event), (gst_pad_start_task), (gst_pad_pause_task), (gst_pad_stop_task): * gst/gstpad.h: * gst/gstqueue.c: (gst_queue_handle_sink_event), (gst_queue_chain), (gst_queue_loop), (gst_queue_src_activate): * gst/gsttask.c: (gst_task_init), (gst_task_set_lock), (gst_task_get_state): * gst/gsttask.h: * gst/schedulers/threadscheduler.c: (gst_thread_scheduler_task_start), (gst_thread_scheduler_func): Implement gst_pad_pause/start/stop_task(), take STREAM lock in task function. Remove ACTIVE pad flag, use FLUSHING everywhere Added _pad_chain(), _pad_get_range() to call chain/getrange functions. Add locks around IS_FLUSHING when reading. Take STREAM lock in chain(), get_range() functions so plugins don't need to take it anymore.
2005-05-25 11:50:11 +00:00
* MT safe.
*/
void
2012-01-19 08:27:04 +00:00
gst_task_set_lock (GstTask * task, GRecMutex * mutex)
gst/: Implement gst_pad_pause/start/stop_task(), take STREAM lock in task function. Original commit message from CVS: * gst/base/gstadapter.c: (gst_adapter_peek), (gst_adapter_flush): * gst/base/gstbasesink.c: (gst_basesink_preroll_queue_push), (gst_basesink_finish_preroll), (gst_basesink_chain), (gst_basesink_loop), (gst_basesink_activate), (gst_basesink_change_state): * gst/base/gstbasesrc.c: (gst_basesrc_do_seek), (gst_basesrc_get_range), (gst_basesrc_loop), (gst_basesrc_activate): * gst/elements/gsttee.c: (gst_tee_sink_activate): * gst/gstpad.c: (gst_pad_dispose), (gst_real_pad_class_init), (gst_real_pad_init), (gst_real_pad_set_property), (gst_real_pad_get_property), (gst_pad_set_active), (gst_pad_is_active), (gst_pad_get_query_types), (gst_pad_unlink), (gst_pad_link_prepare), (gst_pad_link), (gst_pad_get_real_parent), (gst_real_pad_get_caps_unlocked), (gst_pad_peer_get_caps), (gst_pad_accept_caps), (gst_pad_get_peer), (gst_pad_realize), (gst_pad_event_default_dispatch), (gst_pad_event_default), (gst_pad_dispatcher), (gst_pad_query), (gst_real_pad_dispose), (gst_pad_save_thyself), (handle_pad_block), (gst_pad_chain), (gst_pad_push), (gst_pad_get_range), (gst_pad_pull_range), (gst_pad_send_event), (gst_pad_start_task), (gst_pad_pause_task), (gst_pad_stop_task): * gst/gstpad.h: * gst/gstqueue.c: (gst_queue_handle_sink_event), (gst_queue_chain), (gst_queue_loop), (gst_queue_src_activate): * gst/gsttask.c: (gst_task_init), (gst_task_set_lock), (gst_task_get_state): * gst/gsttask.h: * gst/schedulers/threadscheduler.c: (gst_thread_scheduler_task_start), (gst_thread_scheduler_func): Implement gst_pad_pause/start/stop_task(), take STREAM lock in task function. Remove ACTIVE pad flag, use FLUSHING everywhere Added _pad_chain(), _pad_get_range() to call chain/getrange functions. Add locks around IS_FLUSHING when reading. Take STREAM lock in chain(), get_range() functions so plugins don't need to take it anymore.
2005-05-25 11:50:11 +00:00
{
g_return_if_fail (GST_IS_TASK (task));
GST_OBJECT_LOCK (task);
if (G_UNLIKELY (task->running))
goto is_running;
2012-03-08 16:30:49 +00:00
GST_INFO ("setting stream lock %p on task %p", mutex, task);
GST_TASK_GET_LOCK (task) = mutex;
GST_OBJECT_UNLOCK (task);
return;
/* ERRORS */
is_running:
{
GST_OBJECT_UNLOCK (task);
g_warning ("cannot call set_lock on a running task");
}
gst/: Implement gst_pad_pause/start/stop_task(), take STREAM lock in task function. Original commit message from CVS: * gst/base/gstadapter.c: (gst_adapter_peek), (gst_adapter_flush): * gst/base/gstbasesink.c: (gst_basesink_preroll_queue_push), (gst_basesink_finish_preroll), (gst_basesink_chain), (gst_basesink_loop), (gst_basesink_activate), (gst_basesink_change_state): * gst/base/gstbasesrc.c: (gst_basesrc_do_seek), (gst_basesrc_get_range), (gst_basesrc_loop), (gst_basesrc_activate): * gst/elements/gsttee.c: (gst_tee_sink_activate): * gst/gstpad.c: (gst_pad_dispose), (gst_real_pad_class_init), (gst_real_pad_init), (gst_real_pad_set_property), (gst_real_pad_get_property), (gst_pad_set_active), (gst_pad_is_active), (gst_pad_get_query_types), (gst_pad_unlink), (gst_pad_link_prepare), (gst_pad_link), (gst_pad_get_real_parent), (gst_real_pad_get_caps_unlocked), (gst_pad_peer_get_caps), (gst_pad_accept_caps), (gst_pad_get_peer), (gst_pad_realize), (gst_pad_event_default_dispatch), (gst_pad_event_default), (gst_pad_dispatcher), (gst_pad_query), (gst_real_pad_dispose), (gst_pad_save_thyself), (handle_pad_block), (gst_pad_chain), (gst_pad_push), (gst_pad_get_range), (gst_pad_pull_range), (gst_pad_send_event), (gst_pad_start_task), (gst_pad_pause_task), (gst_pad_stop_task): * gst/gstpad.h: * gst/gstqueue.c: (gst_queue_handle_sink_event), (gst_queue_chain), (gst_queue_loop), (gst_queue_src_activate): * gst/gsttask.c: (gst_task_init), (gst_task_set_lock), (gst_task_get_state): * gst/gsttask.h: * gst/schedulers/threadscheduler.c: (gst_thread_scheduler_task_start), (gst_thread_scheduler_func): Implement gst_pad_pause/start/stop_task(), take STREAM lock in task function. Remove ACTIVE pad flag, use FLUSHING everywhere Added _pad_chain(), _pad_get_range() to call chain/getrange functions. Add locks around IS_FLUSHING when reading. Take STREAM lock in chain(), get_range() functions so plugins don't need to take it anymore.
2005-05-25 11:50:11 +00:00
}
/**
* gst_task_get_pool:
* @task: a #GstTask
*
* Get the #GstTaskPool that this task will use for its streaming
* threads.
*
* MT safe.
*
* Returns: (transfer full): the #GstTaskPool used by @task. gst_object_unref()
* after usage.
*/
GstTaskPool *
gst_task_get_pool (GstTask * task)
{
GstTaskPool *result;
GstTaskPrivate *priv;
g_return_val_if_fail (GST_IS_TASK (task), NULL);
priv = task->priv;
GST_OBJECT_LOCK (task);
result = gst_object_ref (priv->pool);
GST_OBJECT_UNLOCK (task);
return result;
}
/**
* gst_task_set_pool:
* @task: a #GstTask
* @pool: (transfer none): a #GstTaskPool
*
* Set @pool as the new GstTaskPool for @task. Any new streaming threads that
* will be created by @task will now use @pool.
*
* MT safe.
*/
void
gst_task_set_pool (GstTask * task, GstTaskPool * pool)
{
GstTaskPool *old;
GstTaskPrivate *priv;
g_return_if_fail (GST_IS_TASK (task));
g_return_if_fail (GST_IS_TASK_POOL (pool));
priv = task->priv;
GST_OBJECT_LOCK (task);
if (priv->pool != pool) {
old = priv->pool;
priv->pool = gst_object_ref (pool);
} else
old = NULL;
GST_OBJECT_UNLOCK (task);
if (old)
gst_object_unref (old);
}
/**
* gst_task_set_enter_callback:
* @task: The #GstTask to use
* @enter_func: (in): a #GstTaskThreadFunc
* @user_data: user data passed to @enter_func
* @notify: called when @user_data is no longer referenced
*
* Call @enter_func when the task function of @task is entered. @user_data will
* be passed to @enter_func and @notify will be called when @user_data is no
* longer referenced.
*/
void
gst_task_set_enter_callback (GstTask * task, GstTaskThreadFunc enter_func,
gpointer user_data, GDestroyNotify notify)
{
GDestroyNotify old_notify;
g_return_if_fail (task != NULL);
g_return_if_fail (GST_IS_TASK (task));
GST_OBJECT_LOCK (task);
if ((old_notify = task->priv->enter_notify)) {
gpointer old_data = task->priv->enter_user_data;
task->priv->enter_user_data = NULL;
task->priv->enter_notify = NULL;
GST_OBJECT_UNLOCK (task);
old_notify (old_data);
GST_OBJECT_LOCK (task);
}
task->priv->enter_func = enter_func;
task->priv->enter_user_data = user_data;
task->priv->enter_notify = notify;
GST_OBJECT_UNLOCK (task);
}
/**
* gst_task_set_leave_callback:
* @task: The #GstTask to use
* @leave_func: (in): a #GstTaskThreadFunc
* @user_data: user data passed to @leave_func
* @notify: called when @user_data is no longer referenced
*
* Call @leave_func when the task function of @task is left. @user_data will
* be passed to @leave_func and @notify will be called when @user_data is no
* longer referenced.
*/
void
gst_task_set_leave_callback (GstTask * task, GstTaskThreadFunc leave_func,
gpointer user_data, GDestroyNotify notify)
{
GDestroyNotify old_notify;
g_return_if_fail (task != NULL);
g_return_if_fail (GST_IS_TASK (task));
GST_OBJECT_LOCK (task);
if ((old_notify = task->priv->leave_notify)) {
gpointer old_data = task->priv->leave_user_data;
task->priv->leave_user_data = NULL;
task->priv->leave_notify = NULL;
GST_OBJECT_UNLOCK (task);
old_notify (old_data);
GST_OBJECT_LOCK (task);
}
task->priv->leave_func = leave_func;
task->priv->leave_user_data = user_data;
task->priv->leave_notify = notify;
GST_OBJECT_UNLOCK (task);
}
gst/: Implement gst_pad_pause/start/stop_task(), take STREAM lock in task function. Original commit message from CVS: * gst/base/gstadapter.c: (gst_adapter_peek), (gst_adapter_flush): * gst/base/gstbasesink.c: (gst_basesink_preroll_queue_push), (gst_basesink_finish_preroll), (gst_basesink_chain), (gst_basesink_loop), (gst_basesink_activate), (gst_basesink_change_state): * gst/base/gstbasesrc.c: (gst_basesrc_do_seek), (gst_basesrc_get_range), (gst_basesrc_loop), (gst_basesrc_activate): * gst/elements/gsttee.c: (gst_tee_sink_activate): * gst/gstpad.c: (gst_pad_dispose), (gst_real_pad_class_init), (gst_real_pad_init), (gst_real_pad_set_property), (gst_real_pad_get_property), (gst_pad_set_active), (gst_pad_is_active), (gst_pad_get_query_types), (gst_pad_unlink), (gst_pad_link_prepare), (gst_pad_link), (gst_pad_get_real_parent), (gst_real_pad_get_caps_unlocked), (gst_pad_peer_get_caps), (gst_pad_accept_caps), (gst_pad_get_peer), (gst_pad_realize), (gst_pad_event_default_dispatch), (gst_pad_event_default), (gst_pad_dispatcher), (gst_pad_query), (gst_real_pad_dispose), (gst_pad_save_thyself), (handle_pad_block), (gst_pad_chain), (gst_pad_push), (gst_pad_get_range), (gst_pad_pull_range), (gst_pad_send_event), (gst_pad_start_task), (gst_pad_pause_task), (gst_pad_stop_task): * gst/gstpad.h: * gst/gstqueue.c: (gst_queue_handle_sink_event), (gst_queue_chain), (gst_queue_loop), (gst_queue_src_activate): * gst/gsttask.c: (gst_task_init), (gst_task_set_lock), (gst_task_get_state): * gst/gsttask.h: * gst/schedulers/threadscheduler.c: (gst_thread_scheduler_task_start), (gst_thread_scheduler_func): Implement gst_pad_pause/start/stop_task(), take STREAM lock in task function. Remove ACTIVE pad flag, use FLUSHING everywhere Added _pad_chain(), _pad_get_range() to call chain/getrange functions. Add locks around IS_FLUSHING when reading. Take STREAM lock in chain(), get_range() functions so plugins don't need to take it anymore.
2005-05-25 11:50:11 +00:00
/**
* gst_task_get_state:
* @task: The #GstTask to query
*
* Get the current state of the task.
*
* Returns: The #GstTaskState of the task
*
* MT safe.
*/
GstTaskState
gst_task_get_state (GstTask * task)
{
GstTaskState result;
g_return_val_if_fail (GST_IS_TASK (task), GST_TASK_STOPPED);
result = GET_TASK_STATE (task);
return result;
}
/* make sure the task is running and start a thread if it's not.
* This function must be called with the task LOCK. */
static gboolean
start_task (GstTask * task)
{
gboolean res = TRUE;
GError *error = NULL;
2009-05-11 22:34:44 +00:00
GstTaskPrivate *priv;
priv = task->priv;
/* new task, We ref before so that it remains alive while
* the thread is running. */
gst_object_ref (task);
/* mark task as running so that a join will wait until we schedule
* and exit the task function. */
task->running = TRUE;
/* push on the thread pool, we remember the original pool because the user
* could change it later on and then we join to the wrong pool. */
priv->pool_id = gst_object_ref (priv->pool);
priv->id =
gst_task_pool_push (priv->pool_id, (GstTaskPoolFunction) gst_task_func,
task, &error);
if (error != NULL) {
g_warning ("failed to create thread: %s", error->message);
g_error_free (error);
res = FALSE;
}
return res;
}
/**
* gst_task_set_state:
* @task: a #GstTask
* @state: the new task state
*
* Sets the state of @task to @state.
*
* The @task must have a lock associated with it using
* gst_task_set_lock() when going to GST_TASK_STARTED or GST_TASK_PAUSED or
* this function will return %FALSE.
*
* MT safe.
*
* Returns: %TRUE if the state could be changed.
*/
gboolean
gst_task_set_state (GstTask * task, GstTaskState state)
{
GstTaskState old;
gboolean res = TRUE;
g_return_val_if_fail (GST_IS_TASK (task), FALSE);
GST_DEBUG_OBJECT (task, "Changing task %p to state %d", task, state);
GST_OBJECT_LOCK (task);
if (state != GST_TASK_STOPPED)
if (G_UNLIKELY (GST_TASK_GET_LOCK (task) == NULL))
goto no_lock;
/* if the state changed, do our thing */
old = GET_TASK_STATE (task);
if (old != state) {
SET_TASK_STATE (task, state);
switch (old) {
case GST_TASK_STOPPED:
/* If the task already has a thread scheduled we don't have to do
* anything. */
if (G_UNLIKELY (!task->running))
res = start_task (task);
break;
case GST_TASK_PAUSED:
/* when we are paused, signal to go to the new state */
GST_TASK_SIGNAL (task);
break;
case GST_TASK_STARTED:
/* if we were started, we'll go to the new state after the next
* iteration. */
break;
}
}
GST_OBJECT_UNLOCK (task);
return res;
/* ERRORS */
no_lock:
{
GST_WARNING_OBJECT (task, "state %d set on task without a lock", state);
GST_OBJECT_UNLOCK (task);
g_warning ("task without a lock can't be set to state %d", state);
return FALSE;
}
}
/**
* gst_task_start:
* @task: The #GstTask to start
*
* Starts @task. The @task must have a lock associated with it using
* gst_task_set_lock() or this function will return %FALSE.
*
* Returns: %TRUE if the task could be started.
*
* MT safe.
*/
gboolean
gst_task_start (GstTask * task)
{
return gst_task_set_state (task, GST_TASK_STARTED);
}
/**
* gst_task_stop:
* @task: The #GstTask to stop
*
* Stops @task. This method merely schedules the task to stop and
* will not wait for the task to have completely stopped. Use
* gst_task_join() to stop and wait for completion.
*
* Returns: %TRUE if the task could be stopped.
*
* MT safe.
*/
gboolean
gst_task_stop (GstTask * task)
{
return gst_task_set_state (task, GST_TASK_STOPPED);
}
/**
* gst_task_pause:
* @task: The #GstTask to pause
*
* Pauses @task. This method can also be called on a task in the
* stopped state, in which case a thread will be started and will remain
* in the paused state. This function does not wait for the task to complete
* the paused state.
*
* Returns: %TRUE if the task could be paused.
*
* MT safe.
*/
gboolean
gst_task_pause (GstTask * task)
{
return gst_task_set_state (task, GST_TASK_PAUSED);
}
/**
* gst_task_join:
* @task: The #GstTask to join
*
* Joins @task. After this call, it is safe to unref the task
* and clean up the lock set with gst_task_set_lock().
*
* The task will automatically be stopped with this call.
*
* This function cannot be called from within a task function as this
* would cause a deadlock. The function will detect this and print a
* g_warning.
*
* Returns: %TRUE if the task could be joined.
*
* MT safe.
*/
gboolean
gst_task_join (GstTask * task)
{
2009-05-11 22:34:44 +00:00
GThread *tself;
GstTaskPrivate *priv;
gpointer id;
GstTaskPool *pool = NULL;
g_return_val_if_fail (GST_IS_TASK (task), FALSE);
priv = task->priv;
tself = g_thread_self ();
GST_DEBUG_OBJECT (task, "Joining task %p, thread %p", task, tself);
/* we don't use a real thread join here because we are using
* thread pools */
GST_OBJECT_LOCK (task);
if (G_UNLIKELY (tself == task->thread))
goto joining_self;
SET_TASK_STATE (task, GST_TASK_STOPPED);
/* signal the state change for when it was blocked in PAUSED. */
GST_TASK_SIGNAL (task);
/* we set the running flag when pushing the task on the thread pool.
* This means that the task function might not be called when we try
* to join it here. */
while (G_LIKELY (task->running))
GST_TASK_WAIT (task);
/* clean the thread */
task->thread = NULL;
/* get the id and pool to join */
pool = priv->pool_id;
id = priv->id;
priv->pool_id = NULL;
priv->id = NULL;
GST_OBJECT_UNLOCK (task);
if (pool) {
if (id)
gst_task_pool_join (pool, id);
gst_object_unref (pool);
}
GST_DEBUG_OBJECT (task, "Joined task %p", task);
return TRUE;
/* ERRORS */
joining_self:
{
GST_WARNING_OBJECT (task, "trying to join task from its thread");
GST_OBJECT_UNLOCK (task);
g_warning ("\nTrying to join task %p from its thread would deadlock.\n"
"You cannot change the state of an element from its streaming\n"
"thread. Use g_idle_add() or post a GstMessage on the bus to\n"
"schedule the state change from the main thread.\n", task);
return FALSE;
}
}