mirrors/gstreamer
mirrors/gstreamer
1
1
Fork 0
mirror of https://gitlab.freedesktop.org/gstreamer/gstreamer.git synced 2024-09-08 13:18:52 +00:00
Code Issues 1 Projects Releases Wiki Activity
gstreamer/gst/multifile/gstsplitmuxsink.c

2547 lines
83 KiB
C
Raw Normal View History

splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
/* GStreamer Muxer bin that splits output stream by size/time
* Copyright (C) <2014> Jan Schmidt <jan@centricular.com>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the
* Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
* Boston, MA 02110-1301, USA.
*/
/**
* SECTION:element-splitmuxsink
* @short_description: Muxer wrapper for splitting output stream by size or time
*
* This element wraps a muxer and a sink, and starts a new file when the mux
* contents are about to cross a threshold of maximum size of maximum time,
* splitting at video keyframe boundaries. Exactly one input video stream
splitmuxsink: allow non-video streams to serve as reference In the absence of a video stream, the first stream will be used as reference. https://bugzilla.gnome.org/show_bug.cgi?id=753617
2015-04-29 17:23:28 +00:00
* can be muxed, with as many accompanying audio and subtitle streams as
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
* desired.
*
* By default, it uses mp4mux and filesink, but they can be changed via
* the 'muxer' and 'sink' properties.
*
* The minimum file size is 1 GOP, however - so limits may be overrun if the
* distance between any 2 keyframes is larger than the limits.
*
splitmuxsink: allow non-video streams to serve as reference In the absence of a video stream, the first stream will be used as reference. https://bugzilla.gnome.org/show_bug.cgi?id=753617
2015-04-29 17:23:28 +00:00
* If a video stream is available, the splitting process is driven by the video
* stream contents, and the video stream must contain closed GOPs for the output
* file parts to be played individually correctly. In the absence of a video
* stream, the first available stream is used as reference for synchronization.
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
*
* <refsect2>
* <title>Example pipelines</title>
* |[
splitmuxsink: fix example pipeline properly x264enc might not have a max-key-int property, but it has a key-int-max property...
2015-02-10 16:00:07 +00:00
* gst-launch-1.0 -e v4l2src num-buffers=500 ! video/x-raw,width=320,height=240 ! videoconvert ! queue ! timeoverlay ! x264enc key-int-max=10 ! h264parse ! splitmuxsink location=video%02d.mov max-size-time=10000000000 max-size-bytes=1000000
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
* ]|
* Records a video stream captured from a v4l2 device and muxes it into
* ISO mp4 files, splitting as needed to limit size/duration to 10 seconds
* and 1MB maximum size.
* </refsect2>
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <string.h>
splitmuxsink: Add max_files_number property https://bugzilla.gnome.org/show_bug.cgi?id=744612
2016-04-13 17:45:07 +00:00
#include <glib/gstdio.h>
splitmuxsink: Add option to split at exactly max-size-time Will try to request a keyframe from the encoder to be sent at the target running time. https://bugzilla.gnome.org/show_bug.cgi?id=769664
2016-08-09 09:55:59 +00:00
#include <gst/video/video.h>
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
#include "gstsplitmuxsink.h"
GST_DEBUG_CATEGORY_STATIC (splitmux_debug);
#define GST_CAT_DEFAULT splitmux_debug
#define GST_SPLITMUX_LOCK(s) g_mutex_lock(&(s)->lock)
#define GST_SPLITMUX_UNLOCK(s) g_mutex_unlock(&(s)->lock)
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
#define GST_SPLITMUX_WAIT_INPUT(s) g_cond_wait (&(s)->input_cond, &(s)->lock)
#define GST_SPLITMUX_BROADCAST_INPUT(s) g_cond_broadcast (&(s)->input_cond)
#define GST_SPLITMUX_WAIT_OUTPUT(s) g_cond_wait (&(s)->output_cond, &(s)->lock)
#define GST_SPLITMUX_BROADCAST_OUTPUT(s) g_cond_broadcast (&(s)->output_cond)
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmuxsink: added a "split now" action signal Now, the video file can be split at an arbitrary time chosen by the user. https://bugzilla.gnome.org/show_bug.cgi?id=787922
2017-09-21 15:23:54 +00:00
static void split_now (GstSplitMuxSink * splitmux);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
enum
{
PROP_0,
PROP_LOCATION,
PROP_MAX_SIZE_TIME,
PROP_MAX_SIZE_BYTES,
splitmuxsink: Add option for timecode-based split If this option is given, it will calculate the next split point based on timecode difference. https://bugzilla.gnome.org/show_bug.cgi?id=774209
2016-12-22 15:40:40 +00:00
PROP_MAX_SIZE_TIMECODE,
splitmuxsink: Add option to split at exactly max-size-time Will try to request a keyframe from the encoder to be sent at the target running time. https://bugzilla.gnome.org/show_bug.cgi?id=769664
2016-08-09 09:55:59 +00:00
PROP_SEND_KEYFRAME_REQUESTS,
splitmuxsink: Add max_files_number property https://bugzilla.gnome.org/show_bug.cgi?id=744612
2016-04-13 17:45:07 +00:00
PROP_MAX_FILES,
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
PROP_MUXER_OVERHEAD,
splitmuxsink: Use muxer reserved space properties if present. If the use-robust-muxing property is set, check if the assigned muxer has reserved-max-duration and reserved-duration-remaining properties, and if so set the configured maximum duration to the reserved-max-duration property, and monitor the remaining space to start a new file if the reserved header space is about to run out - even though it never ought to.
2015-04-07 13:53:19 +00:00
PROP_USE_ROBUST_MUXING,
splitmuxsink: Add alignment-threshold argument If a non-reference stream is behind the reference stream by an amount of time smaller than the alignment threshold (in nsec), it counts as being after it. https://bugzilla.gnome.org/show_bug.cgi?id=782563
2017-05-12 14:53:57 +00:00
PROP_ALIGNMENT_THRESHOLD,
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
PROP_MUXER,
splitmuxsink: Add new reset-muxer property With this the muxer is not set to NULL after each segment but instead only flush events are sent to it to reset the EOS state. As a result, the muxer will keep stream state and e.g. mpegtsmux will keep the packet continuity counter continuous between segments as needed by hlssink2. https://bugzilla.gnome.org/show_bug.cgi?id=794816
2018-03-29 16:19:21 +00:00
PROP_SINK,
PROP_RESET_MUXER,
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
};
#define DEFAULT_MAX_SIZE_TIME 0
#define DEFAULT_MAX_SIZE_BYTES 0
splitmuxsink: Add max_files_number property https://bugzilla.gnome.org/show_bug.cgi?id=744612
2016-04-13 17:45:07 +00:00
#define DEFAULT_MAX_FILES 0
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
#define DEFAULT_MUXER_OVERHEAD 0.02
splitmuxsink: Add option to split at exactly max-size-time Will try to request a keyframe from the encoder to be sent at the target running time. https://bugzilla.gnome.org/show_bug.cgi?id=769664
2016-08-09 09:55:59 +00:00
#define DEFAULT_SEND_KEYFRAME_REQUESTS FALSE
splitmuxsink: Add alignment-threshold argument If a non-reference stream is behind the reference stream by an amount of time smaller than the alignment threshold (in nsec), it counts as being after it. https://bugzilla.gnome.org/show_bug.cgi?id=782563
2017-05-12 14:53:57 +00:00
#define DEFAULT_ALIGNMENT_THRESHOLD 0
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
#define DEFAULT_MUXER "mp4mux"
#define DEFAULT_SINK "filesink"
splitmuxsink: Use muxer reserved space properties if present. If the use-robust-muxing property is set, check if the assigned muxer has reserved-max-duration and reserved-duration-remaining properties, and if so set the configured maximum duration to the reserved-max-duration property, and monitor the remaining space to start a new file if the reserved header space is about to run out - even though it never ought to.
2015-04-07 13:53:19 +00:00
#define DEFAULT_USE_ROBUST_MUXING FALSE
splitmuxsink: Add new reset-muxer property With this the muxer is not set to NULL after each segment but instead only flush events are sent to it to reset the EOS state. As a result, the muxer will keep stream state and e.g. mpegtsmux will keep the packet continuity counter continuous between segments as needed by hlssink2. https://bugzilla.gnome.org/show_bug.cgi?id=794816
2018-03-29 16:19:21 +00:00
#define DEFAULT_RESET_MUXER TRUE
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmuxsink: add a "format-location" signal that allows better control over filenames In certain applications, splitting into files named after a base location template and an incremental sequence number is not enough. This signal gives more fine-grained control to the application to decide how to name the files. https://bugzilla.gnome.org/show_bug.cgi?id=750106
2015-04-15 16:27:04 +00:00
enum
{
SIGNAL_FORMAT_LOCATION,
splitmuxsink: Add format-location-full signal Add a new signal for formatting the filename, which receives a GstSample containing the first buffer from the reference stream that will be muxed into that file. Useful for creating filenames that are based on the running time or other attributes of the buffer. To make it work, opening of files and setting filenames is now deferred until there is some data to write to it, which also requires some changes to how async state changes and gap events are handled.
2016-11-17 12:40:27 +00:00
SIGNAL_FORMAT_LOCATION_FULL,
splitmuxsink: added a "split now" action signal Now, the video file can be split at an arbitrary time chosen by the user. https://bugzilla.gnome.org/show_bug.cgi?id=787922
2017-09-21 15:23:54 +00:00
SIGNAL_SPLIT_NOW,
splitmuxsink: add a "format-location" signal that allows better control over filenames In certain applications, splitting into files named after a base location template and an incremental sequence number is not enough. This signal gives more fine-grained control to the application to decide how to name the files. https://bugzilla.gnome.org/show_bug.cgi?id=750106
2015-04-15 16:27:04 +00:00
SIGNAL_LAST
};
static guint signals[SIGNAL_LAST];
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
static GstStaticPadTemplate video_sink_template =
GST_STATIC_PAD_TEMPLATE ("video",
GST_PAD_SINK,
GST_PAD_REQUEST,
GST_STATIC_CAPS_ANY);
static GstStaticPadTemplate audio_sink_template =
GST_STATIC_PAD_TEMPLATE ("audio_%u",
GST_PAD_SINK,
GST_PAD_REQUEST,
GST_STATIC_CAPS_ANY);
static GstStaticPadTemplate subtitle_sink_template =
GST_STATIC_PAD_TEMPLATE ("subtitle_%u",
GST_PAD_SINK,
GST_PAD_REQUEST,
GST_STATIC_CAPS_ANY);
static GQuark PAD_CONTEXT;
static void
_do_init (void)
{
PAD_CONTEXT = g_quark_from_static_string ("pad-context");
}
#define gst_splitmux_sink_parent_class parent_class
G_DEFINE_TYPE_EXTENDED (GstSplitMuxSink, gst_splitmux_sink, GST_TYPE_BIN, 0,
_do_init ());
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
static gboolean create_muxer (GstSplitMuxSink * splitmux);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
static gboolean create_sink (GstSplitMuxSink * splitmux);
static void gst_splitmux_sink_set_property (GObject * object, guint prop_id,
const GValue * value, GParamSpec * pspec);
static void gst_splitmux_sink_get_property (GObject * object, guint prop_id,
GValue * value, GParamSpec * pspec);
static void gst_splitmux_sink_dispose (GObject * object);
static void gst_splitmux_sink_finalize (GObject * object);
static GstPad *gst_splitmux_sink_request_new_pad (GstElement * element,
GstPadTemplate * templ, const gchar * name, const GstCaps * caps);
static void gst_splitmux_sink_release_pad (GstElement * element, GstPad * pad);
static GstStateChangeReturn gst_splitmux_sink_change_state (GstElement *
element, GstStateChange transition);
static void bus_handler (GstBin * bin, GstMessage * msg);
splitmuxsink: Add format-location-full signal Add a new signal for formatting the filename, which receives a GstSample containing the first buffer from the reference stream that will be muxed into that file. Useful for creating filenames that are based on the running time or other attributes of the buffer. To make it work, opening of files and setting filenames is now deferred until there is some data to write to it, which also requires some changes to how async state changes and gap events are handled.
2016-11-17 12:40:27 +00:00
static void set_next_filename (GstSplitMuxSink * splitmux, MqStreamCtx * ctx);
static void start_next_fragment (GstSplitMuxSink * splitmux, MqStreamCtx * ctx);
splitmux: Add unit test for file splitting Add a unit test for file splitting, and fix the leaks in the splitmuxsink it found
2015-02-06 14:41:49 +00:00
static void mq_stream_ctx_unref (MqStreamCtx * ctx);
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
static void grow_blocked_queues (GstSplitMuxSink * splitmux);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmuxsink: Add max_files_number property https://bugzilla.gnome.org/show_bug.cgi?id=744612
2016-04-13 17:45:07 +00:00
static void gst_splitmux_sink_ensure_max_files (GstSplitMuxSink * splitmux);
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
static GstElement *create_element (GstSplitMuxSink * splitmux,
const gchar * factory, const gchar * name, gboolean locked);
splitmuxsink: Add max_files_number property https://bugzilla.gnome.org/show_bug.cgi?id=744612
2016-04-13 17:45:07 +00:00
splitmuxsink: Add format-location-full signal Add a new signal for formatting the filename, which receives a GstSample containing the first buffer from the reference stream that will be muxed into that file. Useful for creating filenames that are based on the running time or other attributes of the buffer. To make it work, opening of files and setting filenames is now deferred until there is some data to write to it, which also requires some changes to how async state changes and gap events are handled.
2016-11-17 12:40:27 +00:00
static void do_async_done (GstSplitMuxSink * splitmux);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
static MqStreamBuf *
mq_stream_buf_new (void)
{
return g_slice_new0 (MqStreamBuf);
}
static void
mq_stream_buf_free (MqStreamBuf * data)
{
g_slice_free (MqStreamBuf, data);
}
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
static SplitMuxOutputCommand *
out_cmd_buf_new (void)
{
return g_slice_new0 (SplitMuxOutputCommand);
}
static void
out_cmd_buf_free (SplitMuxOutputCommand * data)
{
g_slice_free (SplitMuxOutputCommand, data);
}
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
static void
gst_splitmux_sink_class_init (GstSplitMuxSinkClass * klass)
{
GObjectClass *gobject_class = (GObjectClass *) klass;
GstElementClass *gstelement_class = (GstElementClass *) klass;
GstBinClass *gstbin_class = (GstBinClass *) klass;
gobject_class->set_property = gst_splitmux_sink_set_property;
gobject_class->get_property = gst_splitmux_sink_get_property;
gobject_class->dispose = gst_splitmux_sink_dispose;
gobject_class->finalize = gst_splitmux_sink_finalize;
gst_element_class_set_static_metadata (gstelement_class,
"Split Muxing Bin", "Generic/Bin/Muxer",
"Convenience bin that muxes incoming streams into multiple time/size limited files",
"Jan Schmidt <jan@centricular.com>");
good: use new gst_element_class_add_static_pad_template() https://bugzilla.gnome.org/show_bug.cgi?id=763076
2016-03-04 01:30:12 +00:00
gst_element_class_add_static_pad_template (gstelement_class,
&video_sink_template);
gst_element_class_add_static_pad_template (gstelement_class,
&audio_sink_template);
gst_element_class_add_static_pad_template (gstelement_class,
&subtitle_sink_template);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
gstelement_class->change_state =
GST_DEBUG_FUNCPTR (gst_splitmux_sink_change_state);
gstelement_class->request_new_pad =
GST_DEBUG_FUNCPTR (gst_splitmux_sink_request_new_pad);
gstelement_class->release_pad =
GST_DEBUG_FUNCPTR (gst_splitmux_sink_release_pad);
gstbin_class->handle_message = bus_handler;
g_object_class_install_property (gobject_class, PROP_LOCATION,
g_param_spec_string ("location", "File Output Pattern",
"Format string pattern for the location of the files to write (e.g. video%05d.mp4)",
NULL, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
g_object_class_install_property (gobject_class, PROP_MUXER_OVERHEAD,
g_param_spec_double ("mux-overhead", "Muxing Overhead",
"Extra size overhead of muxing (0.02 = 2%)", 0.0, 1.0,
DEFAULT_MUXER_OVERHEAD,
G_PARAM_READWRITE | GST_PARAM_CONTROLLABLE | G_PARAM_STATIC_STRINGS));
g_object_class_install_property (gobject_class, PROP_MAX_SIZE_TIME,
g_param_spec_uint64 ("max-size-time", "Max. size (ns)",
"Max. amount of time per file (in ns, 0=disable)", 0, G_MAXUINT64,
DEFAULT_MAX_SIZE_TIME, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
g_object_class_install_property (gobject_class, PROP_MAX_SIZE_BYTES,
g_param_spec_uint64 ("max-size-bytes", "Max. size bytes",
"Max. amount of data per file (in bytes, 0=disable)", 0, G_MAXUINT64,
DEFAULT_MAX_SIZE_BYTES, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
splitmuxsink: Add option for timecode-based split If this option is given, it will calculate the next split point based on timecode difference. https://bugzilla.gnome.org/show_bug.cgi?id=774209
2016-12-22 15:40:40 +00:00
g_object_class_install_property (gobject_class, PROP_MAX_SIZE_TIMECODE,
g_param_spec_string ("max-size-timecode", "Maximum timecode difference",
"Maximum difference in timecode between first and last frame. "
"Separator is assumed to be \":\" everywhere (e.g. 01:00:00:00). "
"Will only be effective if a timecode track is present.",
NULL, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
splitmuxsink: Add option to split at exactly max-size-time Will try to request a keyframe from the encoder to be sent at the target running time. https://bugzilla.gnome.org/show_bug.cgi?id=769664
2016-08-09 09:55:59 +00:00
g_object_class_install_property (gobject_class, PROP_SEND_KEYFRAME_REQUESTS,
g_param_spec_boolean ("send-keyframe-requests",
"Request keyframes at max-size-time",
"Request a keyframe every max-size-time ns to try splitting at that point. "
"Needs max-size-bytes to be 0 in order to be effective.",
DEFAULT_SEND_KEYFRAME_REQUESTS,
G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
splitmuxsink: Add max_files_number property https://bugzilla.gnome.org/show_bug.cgi?id=744612
2016-04-13 17:45:07 +00:00
g_object_class_install_property (gobject_class, PROP_MAX_FILES,
g_param_spec_uint ("max-files", "Max files",
"Maximum number of files to keep on disk. Once the maximum is reached,"
splitmuxsink: Add option to split at exactly max-size-time Will try to request a keyframe from the encoder to be sent at the target running time. https://bugzilla.gnome.org/show_bug.cgi?id=769664
2016-08-09 09:55:59 +00:00
"old files start to be deleted to make room for new ones.", 0,
G_MAXUINT, DEFAULT_MAX_FILES,
splitmuxsink: Add max_files_number property https://bugzilla.gnome.org/show_bug.cgi?id=744612
2016-04-13 17:45:07 +00:00
G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
splitmuxsink: Add alignment-threshold argument If a non-reference stream is behind the reference stream by an amount of time smaller than the alignment threshold (in nsec), it counts as being after it. https://bugzilla.gnome.org/show_bug.cgi?id=782563
2017-05-12 14:53:57 +00:00
g_object_class_install_property (gobject_class, PROP_ALIGNMENT_THRESHOLD,
g_param_spec_uint64 ("alignment-threshold", "Alignment threshold (ns)",
"Allow non-reference streams to be that many ns before the reference"
" stream",
0, G_MAXUINT64, DEFAULT_ALIGNMENT_THRESHOLD,
G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
g_object_class_install_property (gobject_class, PROP_MUXER,
g_param_spec_object ("muxer", "Muxer",
"The muxer element to use (NULL = default mp4mux)",
GST_TYPE_ELEMENT, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
g_object_class_install_property (gobject_class, PROP_SINK,
g_param_spec_object ("sink", "Sink",
"The sink element (or element chain) to use (NULL = default filesink)",
GST_TYPE_ELEMENT, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
splitmuxsink: add a "format-location" signal that allows better control over filenames In certain applications, splitting into files named after a base location template and an incremental sequence number is not enough. This signal gives more fine-grained control to the application to decide how to name the files. https://bugzilla.gnome.org/show_bug.cgi?id=750106
2015-04-15 16:27:04 +00:00
splitmuxsink: Use muxer reserved space properties if present. If the use-robust-muxing property is set, check if the assigned muxer has reserved-max-duration and reserved-duration-remaining properties, and if so set the configured maximum duration to the reserved-max-duration property, and monitor the remaining space to start a new file if the reserved header space is about to run out - even though it never ought to.
2015-04-07 13:53:19 +00:00
g_object_class_install_property (gobject_class, PROP_USE_ROBUST_MUXING,
g_param_spec_boolean ("use-robust-muxing",
"Support robust-muxing mode of some muxers",
"Check if muxers support robust muxing via the reserved-max-duration and "
"reserved-duration-remaining properties and use them if so. "
"(Only present on qtmux and mp4mux for now). splitmuxsink may then also "
" create new fragments if the reserved header space is about to overflow. "
"Note this does not set reserved-moov-update-period - apps should do that manually",
DEFAULT_USE_ROBUST_MUXING,
G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
splitmuxsink: Add new reset-muxer property With this the muxer is not set to NULL after each segment but instead only flush events are sent to it to reset the EOS state. As a result, the muxer will keep stream state and e.g. mpegtsmux will keep the packet continuity counter continuous between segments as needed by hlssink2. https://bugzilla.gnome.org/show_bug.cgi?id=794816
2018-03-29 16:19:21 +00:00
g_object_class_install_property (gobject_class, PROP_RESET_MUXER,
g_param_spec_boolean ("reset-muxer",
"Reset Muxer",
"Reset the muxer after each segment. Disabling this will not work for most muxers.",
DEFAULT_RESET_MUXER, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS));
splitmuxsink: add a "format-location" signal that allows better control over filenames In certain applications, splitting into files named after a base location template and an incremental sequence number is not enough. This signal gives more fine-grained control to the application to decide how to name the files. https://bugzilla.gnome.org/show_bug.cgi?id=750106
2015-04-15 16:27:04 +00:00
/**
* GstSplitMuxSink::format-location:
* @splitmux: the #GstSplitMuxSink
* @fragment_id: the sequence number of the file to be created
*
* Returns: the location to be used for the next output file
*/
signals[SIGNAL_FORMAT_LOCATION] =
g_signal_new ("format-location", G_TYPE_FROM_CLASS (klass),
G_SIGNAL_RUN_LAST, 0, NULL, NULL, NULL, G_TYPE_STRING, 1, G_TYPE_UINT);
splitmuxsink: Add format-location-full signal Add a new signal for formatting the filename, which receives a GstSample containing the first buffer from the reference stream that will be muxed into that file. Useful for creating filenames that are based on the running time or other attributes of the buffer. To make it work, opening of files and setting filenames is now deferred until there is some data to write to it, which also requires some changes to how async state changes and gap events are handled.
2016-11-17 12:40:27 +00:00
/**
* GstSplitMuxSink::format-location-full:
* @splitmux: the #GstSplitMuxSink
* @fragment_id: the sequence number of the file to be created
* @first_sample: A #GstSample containing the first buffer
* from the reference stream in the new file
*
* Returns: the location to be used for the next output file
*/
signals[SIGNAL_FORMAT_LOCATION_FULL] =
g_signal_new ("format-location-full", G_TYPE_FROM_CLASS (klass),
G_SIGNAL_RUN_LAST, 0, NULL, NULL, NULL, G_TYPE_STRING, 2, G_TYPE_UINT,
GST_TYPE_SAMPLE);
splitmuxsink: added a "split now" action signal Now, the video file can be split at an arbitrary time chosen by the user. https://bugzilla.gnome.org/show_bug.cgi?id=787922
2017-09-21 15:23:54 +00:00
/**
* GstSplitMuxSink::split-now:
* @splitmux: the #GstSplitMuxSink
*
* When called by the user, this action signal splits the video file (and begins a new one) immediately.
*
*
* Since: 1.14
*/
signals[SIGNAL_SPLIT_NOW] =
g_signal_new ("split-now", G_TYPE_FROM_CLASS (klass),
G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GstSplitMuxSinkClass,
split_now), NULL, NULL, NULL, G_TYPE_NONE, 0);
klass->split_now = split_now;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
}
static void
gst_splitmux_sink_init (GstSplitMuxSink * splitmux)
{
g_mutex_init (&splitmux->lock);
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
g_cond_init (&splitmux->input_cond);
g_cond_init (&splitmux->output_cond);
g_queue_init (&splitmux->out_cmd_q);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmux->mux_overhead = DEFAULT_MUXER_OVERHEAD;
splitmux->threshold_time = DEFAULT_MAX_SIZE_TIME;
splitmux->threshold_bytes = DEFAULT_MAX_SIZE_BYTES;
splitmuxsink: Add max_files_number property https://bugzilla.gnome.org/show_bug.cgi?id=744612
2016-04-13 17:45:07 +00:00
splitmux->max_files = DEFAULT_MAX_FILES;
splitmuxsink: Add option to split at exactly max-size-time Will try to request a keyframe from the encoder to be sent at the target running time. https://bugzilla.gnome.org/show_bug.cgi?id=769664
2016-08-09 09:55:59 +00:00
splitmux->send_keyframe_requests = DEFAULT_SEND_KEYFRAME_REQUESTS;
splitmuxsink: Add option for timecode-based split If this option is given, it will calculate the next split point based on timecode difference. https://bugzilla.gnome.org/show_bug.cgi?id=774209
2016-12-22 15:40:40 +00:00
splitmux->next_max_tc_time = GST_CLOCK_TIME_NONE;
splitmuxsink: Add alignment-threshold argument If a non-reference stream is behind the reference stream by an amount of time smaller than the alignment threshold (in nsec), it counts as being after it. https://bugzilla.gnome.org/show_bug.cgi?id=782563
2017-05-12 14:53:57 +00:00
splitmux->alignment_threshold = DEFAULT_ALIGNMENT_THRESHOLD;
splitmuxsink: Use muxer reserved space properties if present. If the use-robust-muxing property is set, check if the assigned muxer has reserved-max-duration and reserved-duration-remaining properties, and if so set the configured maximum duration to the reserved-max-duration property, and monitor the remaining space to start a new file if the reserved header space is about to run out - even though it never ought to.
2015-04-07 13:53:19 +00:00
splitmux->use_robust_muxing = DEFAULT_USE_ROBUST_MUXING;
splitmuxsink: Add new reset-muxer property With this the muxer is not set to NULL after each segment but instead only flush events are sent to it to reset the EOS state. As a result, the muxer will keep stream state and e.g. mpegtsmux will keep the packet continuity counter continuous between segments as needed by hlssink2. https://bugzilla.gnome.org/show_bug.cgi?id=794816
2018-03-29 16:19:21 +00:00
splitmux->reset_muxer = DEFAULT_RESET_MUXER;
splitmuxsink: Add option for timecode-based split If this option is given, it will calculate the next split point based on timecode difference. https://bugzilla.gnome.org/show_bug.cgi?id=774209
2016-12-22 15:40:40 +00:00
splitmux->threshold_timecode_str = NULL;
splitmuxsink: flag as sink from the start
2015-02-13 20:40:48 +00:00
GST_OBJECT_FLAG_SET (splitmux, GST_ELEMENT_FLAG_SINK);
splitmuxsink: added a "split now" action signal Now, the video file can be split at an arbitrary time chosen by the user. https://bugzilla.gnome.org/show_bug.cgi?id=787922
2017-09-21 15:23:54 +00:00
splitmux->split_now = FALSE;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
}
static void
gst_splitmux_reset (GstSplitMuxSink * splitmux)
{
splitmuxsink: Set child elements to NULL when removing. Make sure that elements are in the NULL state when removing. Fixes critical warnings when errors occur early on in starting up.
2016-10-25 03:51:52 +00:00
if (splitmux->muxer) {
gst_element_set_locked_state (splitmux->muxer, TRUE);
gst_element_set_state (splitmux->muxer, GST_STATE_NULL);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
gst_bin_remove (GST_BIN (splitmux), splitmux->muxer);
splitmuxsink: Set child elements to NULL when removing. Make sure that elements are in the NULL state when removing. Fixes critical warnings when errors occur early on in starting up.
2016-10-25 03:51:52 +00:00
}
if (splitmux->active_sink) {
gst_element_set_locked_state (splitmux->active_sink, TRUE);
gst_element_set_state (splitmux->active_sink, GST_STATE_NULL);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
gst_bin_remove (GST_BIN (splitmux), splitmux->active_sink);
splitmuxsink: Set child elements to NULL when removing. Make sure that elements are in the NULL state when removing. Fixes critical warnings when errors occur early on in starting up.
2016-10-25 03:51:52 +00:00
}
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
splitmux->sink = splitmux->active_sink = splitmux->muxer = NULL;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
}
static void
gst_splitmux_sink_dispose (GObject * object)
{
GstSplitMuxSink *splitmux = GST_SPLITMUX_SINK (object);
/* Calling parent dispose invalidates all child pointers */
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
splitmux->sink = splitmux->active_sink = splitmux->muxer = NULL;
splitmuxsink: Fix GObject warnings on shutdown. Commit 83e718 added a pad template to splitmux request pads, which means that GstElement now releases the pads on dispose, but after having removed all elements in the bin and unlinked them. Make sure we can handle cleanup in that case without throwing assertions. https://bugzilla.gnome.org/show_bug.cgi?id=773784
2016-11-02 00:00:13 +00:00
G_OBJECT_CLASS (parent_class)->dispose (object);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
}
static void
gst_splitmux_sink_finalize (GObject * object)
{
GstSplitMuxSink *splitmux = GST_SPLITMUX_SINK (object);
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
g_cond_clear (&splitmux->input_cond);
g_cond_clear (&splitmux->output_cond);
splitmuxsink: fix mutex leak
2015-04-09 11:58:26 +00:00
g_mutex_clear (&splitmux->lock);
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
g_queue_foreach (&splitmux->out_cmd_q, (GFunc) out_cmd_buf_free, NULL);
g_queue_clear (&splitmux->out_cmd_q);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
if (splitmux->provided_sink)
gst_object_unref (splitmux->provided_sink);
splitmux: Add unit test for file splitting Add a unit test for file splitting, and fix the leaks in the splitmuxsink it found
2015-02-06 14:41:49 +00:00
if (splitmux->provided_muxer)
gst_object_unref (splitmux->provided_muxer);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmuxsink: Add option for timecode-based split If this option is given, it will calculate the next split point based on timecode difference. https://bugzilla.gnome.org/show_bug.cgi?id=774209
2016-12-22 15:40:40 +00:00
if (splitmux->threshold_timecode_str)
g_free (splitmux->threshold_timecode_str);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
g_free (splitmux->location);
splitmux: Add unit test for file splitting Add a unit test for file splitting, and fix the leaks in the splitmuxsink it found
2015-02-06 14:41:49 +00:00
/* Make sure to free any un-released contexts */
g_list_foreach (splitmux->contexts, (GFunc) mq_stream_ctx_unref, NULL);
g_list_free (splitmux->contexts);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
G_OBJECT_CLASS (parent_class)->finalize (object);
}
splitmuxsink: Use muxer reserved space properties if present. If the use-robust-muxing property is set, check if the assigned muxer has reserved-max-duration and reserved-duration-remaining properties, and if so set the configured maximum duration to the reserved-max-duration property, and monitor the remaining space to start a new file if the reserved header space is about to run out - even though it never ought to.
2015-04-07 13:53:19 +00:00
/*
* Set any time threshold to the muxer, if it has
* reserved-max-duration and reserved-duration-remaining
* properties. Called when creating/claiming the muxer
* in create_elements() */
static void
update_muxer_properties (GstSplitMuxSink * sink)
{
GObjectClass *klass;
GstClockTime threshold_time;
sink->muxer_has_reserved_props = FALSE;
if (sink->muxer == NULL)
return;
klass = G_OBJECT_GET_CLASS (sink->muxer);
if (g_object_class_find_property (klass, "reserved-max-duration") == NULL)
return;
if (g_object_class_find_property (klass,
"reserved-duration-remaining") == NULL)
return;
sink->muxer_has_reserved_props = TRUE;
GST_LOG_OBJECT (sink, "Setting muxer reserved time to %" GST_TIME_FORMAT,
GST_TIME_ARGS (sink->threshold_time));
GST_OBJECT_LOCK (sink);
threshold_time = sink->threshold_time;
GST_OBJECT_UNLOCK (sink);
if (threshold_time > 0) {
/* Tell the muxer how much space to reserve */
GstClockTime muxer_threshold = threshold_time;
g_object_set (sink->muxer, "reserved-max-duration", muxer_threshold, NULL);
}
}
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
static void
gst_splitmux_sink_set_property (GObject * object, guint prop_id,
const GValue * value, GParamSpec * pspec)
{
GstSplitMuxSink *splitmux = GST_SPLITMUX_SINK (object);
switch (prop_id) {
case PROP_LOCATION:{
GST_OBJECT_LOCK (splitmux);
g_free (splitmux->location);
splitmux->location = g_value_dup_string (value);
GST_OBJECT_UNLOCK (splitmux);
break;
}
case PROP_MAX_SIZE_BYTES:
GST_OBJECT_LOCK (splitmux);
splitmux->threshold_bytes = g_value_get_uint64 (value);
GST_OBJECT_UNLOCK (splitmux);
break;
case PROP_MAX_SIZE_TIME:
GST_OBJECT_LOCK (splitmux);
splitmux->threshold_time = g_value_get_uint64 (value);
GST_OBJECT_UNLOCK (splitmux);
break;
splitmuxsink: Add option for timecode-based split If this option is given, it will calculate the next split point based on timecode difference. https://bugzilla.gnome.org/show_bug.cgi?id=774209
2016-12-22 15:40:40 +00:00
case PROP_MAX_SIZE_TIMECODE:
GST_OBJECT_LOCK (splitmux);
splitmux->threshold_timecode_str = g_value_dup_string (value);
GST_OBJECT_UNLOCK (splitmux);
break;
splitmuxsink: Add option to split at exactly max-size-time Will try to request a keyframe from the encoder to be sent at the target running time. https://bugzilla.gnome.org/show_bug.cgi?id=769664
2016-08-09 09:55:59 +00:00
case PROP_SEND_KEYFRAME_REQUESTS:
GST_OBJECT_LOCK (splitmux);
splitmux->send_keyframe_requests = g_value_get_boolean (value);
GST_OBJECT_UNLOCK (splitmux);
break;
splitmuxsink: Add max_files_number property https://bugzilla.gnome.org/show_bug.cgi?id=744612
2016-04-13 17:45:07 +00:00
case PROP_MAX_FILES:
GST_OBJECT_LOCK (splitmux);
splitmux->max_files = g_value_get_uint (value);
GST_OBJECT_UNLOCK (splitmux);
break;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
case PROP_MUXER_OVERHEAD:
GST_OBJECT_LOCK (splitmux);
splitmux->mux_overhead = g_value_get_double (value);
GST_OBJECT_UNLOCK (splitmux);
break;
splitmuxsink: Use muxer reserved space properties if present. If the use-robust-muxing property is set, check if the assigned muxer has reserved-max-duration and reserved-duration-remaining properties, and if so set the configured maximum duration to the reserved-max-duration property, and monitor the remaining space to start a new file if the reserved header space is about to run out - even though it never ought to.
2015-04-07 13:53:19 +00:00
case PROP_USE_ROBUST_MUXING:
GST_OBJECT_LOCK (splitmux);
splitmux->use_robust_muxing = g_value_get_boolean (value);
GST_OBJECT_UNLOCK (splitmux);
if (splitmux->use_robust_muxing)
update_muxer_properties (splitmux);
break;
splitmuxsink: Add alignment-threshold argument If a non-reference stream is behind the reference stream by an amount of time smaller than the alignment threshold (in nsec), it counts as being after it. https://bugzilla.gnome.org/show_bug.cgi?id=782563
2017-05-12 14:53:57 +00:00
case PROP_ALIGNMENT_THRESHOLD:
GST_OBJECT_LOCK (splitmux);
splitmux->alignment_threshold = g_value_get_uint64 (value);
GST_OBJECT_UNLOCK (splitmux);
break;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
case PROP_SINK:
splitmuxsink: Protect property variables with the object lock. Use the object lock instead of the splitmux lock to protect internal property variables, so they're not locked when switching to a new file. https://bugzilla.gnome.org/show_bug.cgi?id=744420
2015-03-06 13:55:47 +00:00
GST_OBJECT_LOCK (splitmux);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
if (splitmux->provided_sink)
gst_object_unref (splitmux->provided_sink);
splitmuxsink: Take ownership of floating refs sink the floating ref when handed a muxer or sink to use so we clearly take ownership.
2016-10-26 00:59:32 +00:00
splitmux->provided_sink = g_value_get_object (value);
gst_object_ref_sink (splitmux->provided_sink);
splitmuxsink: Protect property variables with the object lock. Use the object lock instead of the splitmux lock to protect internal property variables, so they're not locked when switching to a new file. https://bugzilla.gnome.org/show_bug.cgi?id=744420
2015-03-06 13:55:47 +00:00
GST_OBJECT_UNLOCK (splitmux);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
break;
case PROP_MUXER:
splitmuxsink: Protect property variables with the object lock. Use the object lock instead of the splitmux lock to protect internal property variables, so they're not locked when switching to a new file. https://bugzilla.gnome.org/show_bug.cgi?id=744420
2015-03-06 13:55:47 +00:00
GST_OBJECT_LOCK (splitmux);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
if (splitmux->provided_muxer)
gst_object_unref (splitmux->provided_muxer);
splitmuxsink: Take ownership of floating refs sink the floating ref when handed a muxer or sink to use so we clearly take ownership.
2016-10-26 00:59:32 +00:00
splitmux->provided_muxer = g_value_get_object (value);
gst_object_ref_sink (splitmux->provided_muxer);
splitmuxsink: Protect property variables with the object lock. Use the object lock instead of the splitmux lock to protect internal property variables, so they're not locked when switching to a new file. https://bugzilla.gnome.org/show_bug.cgi?id=744420
2015-03-06 13:55:47 +00:00
GST_OBJECT_UNLOCK (splitmux);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
break;
splitmuxsink: Add new reset-muxer property With this the muxer is not set to NULL after each segment but instead only flush events are sent to it to reset the EOS state. As a result, the muxer will keep stream state and e.g. mpegtsmux will keep the packet continuity counter continuous between segments as needed by hlssink2. https://bugzilla.gnome.org/show_bug.cgi?id=794816
2018-03-29 16:19:21 +00:00
case PROP_RESET_MUXER:
GST_OBJECT_LOCK (splitmux);
splitmux->reset_muxer = g_value_get_boolean (value);
GST_OBJECT_UNLOCK (splitmux);
break;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
default:
G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
break;
}
}
static void
gst_splitmux_sink_get_property (GObject * object, guint prop_id,
GValue * value, GParamSpec * pspec)
{
GstSplitMuxSink *splitmux = GST_SPLITMUX_SINK (object);
switch (prop_id) {
case PROP_LOCATION:
GST_OBJECT_LOCK (splitmux);
g_value_set_string (value, splitmux->location);
GST_OBJECT_UNLOCK (splitmux);
break;
case PROP_MAX_SIZE_BYTES:
GST_OBJECT_LOCK (splitmux);
g_value_set_uint64 (value, splitmux->threshold_bytes);
GST_OBJECT_UNLOCK (splitmux);
break;
case PROP_MAX_SIZE_TIME:
GST_OBJECT_LOCK (splitmux);
g_value_set_uint64 (value, splitmux->threshold_time);
GST_OBJECT_UNLOCK (splitmux);
break;
splitmuxsink: Add option for timecode-based split If this option is given, it will calculate the next split point based on timecode difference. https://bugzilla.gnome.org/show_bug.cgi?id=774209
2016-12-22 15:40:40 +00:00
case PROP_MAX_SIZE_TIMECODE:
GST_OBJECT_LOCK (splitmux);
g_value_set_string (value, splitmux->threshold_timecode_str);
GST_OBJECT_UNLOCK (splitmux);
break;
splitmuxsink: Add option to split at exactly max-size-time Will try to request a keyframe from the encoder to be sent at the target running time. https://bugzilla.gnome.org/show_bug.cgi?id=769664
2016-08-09 09:55:59 +00:00
case PROP_SEND_KEYFRAME_REQUESTS:
GST_OBJECT_LOCK (splitmux);
g_value_set_boolean (value, splitmux->send_keyframe_requests);
GST_OBJECT_UNLOCK (splitmux);
break;
splitmuxsink: Add max_files_number property https://bugzilla.gnome.org/show_bug.cgi?id=744612
2016-04-13 17:45:07 +00:00
case PROP_MAX_FILES:
GST_OBJECT_LOCK (splitmux);
g_value_set_uint (value, splitmux->max_files);
GST_OBJECT_UNLOCK (splitmux);
break;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
case PROP_MUXER_OVERHEAD:
GST_OBJECT_LOCK (splitmux);
g_value_set_double (value, splitmux->mux_overhead);
GST_OBJECT_UNLOCK (splitmux);
break;
splitmuxsink: Use muxer reserved space properties if present. If the use-robust-muxing property is set, check if the assigned muxer has reserved-max-duration and reserved-duration-remaining properties, and if so set the configured maximum duration to the reserved-max-duration property, and monitor the remaining space to start a new file if the reserved header space is about to run out - even though it never ought to.
2015-04-07 13:53:19 +00:00
case PROP_USE_ROBUST_MUXING:
GST_OBJECT_LOCK (splitmux);
g_value_set_boolean (value, splitmux->use_robust_muxing);
GST_OBJECT_UNLOCK (splitmux);
break;
splitmuxsink: Add alignment-threshold argument If a non-reference stream is behind the reference stream by an amount of time smaller than the alignment threshold (in nsec), it counts as being after it. https://bugzilla.gnome.org/show_bug.cgi?id=782563
2017-05-12 14:53:57 +00:00
case PROP_ALIGNMENT_THRESHOLD:
GST_OBJECT_LOCK (splitmux);
g_value_set_uint64 (value, splitmux->alignment_threshold);
GST_OBJECT_UNLOCK (splitmux);
break;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
case PROP_SINK:
splitmuxsink: Protect property variables with the object lock. Use the object lock instead of the splitmux lock to protect internal property variables, so they're not locked when switching to a new file. https://bugzilla.gnome.org/show_bug.cgi?id=744420
2015-03-06 13:55:47 +00:00
GST_OBJECT_LOCK (splitmux);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
g_value_set_object (value, splitmux->provided_sink);
splitmuxsink: Protect property variables with the object lock. Use the object lock instead of the splitmux lock to protect internal property variables, so they're not locked when switching to a new file. https://bugzilla.gnome.org/show_bug.cgi?id=744420
2015-03-06 13:55:47 +00:00
GST_OBJECT_UNLOCK (splitmux);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
break;
case PROP_MUXER:
splitmuxsink: Protect property variables with the object lock. Use the object lock instead of the splitmux lock to protect internal property variables, so they're not locked when switching to a new file. https://bugzilla.gnome.org/show_bug.cgi?id=744420
2015-03-06 13:55:47 +00:00
GST_OBJECT_LOCK (splitmux);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
g_value_set_object (value, splitmux->provided_muxer);
splitmuxsink: Protect property variables with the object lock. Use the object lock instead of the splitmux lock to protect internal property variables, so they're not locked when switching to a new file. https://bugzilla.gnome.org/show_bug.cgi?id=744420
2015-03-06 13:55:47 +00:00
GST_OBJECT_UNLOCK (splitmux);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
break;
splitmuxsink: Add new reset-muxer property With this the muxer is not set to NULL after each segment but instead only flush events are sent to it to reset the EOS state. As a result, the muxer will keep stream state and e.g. mpegtsmux will keep the packet continuity counter continuous between segments as needed by hlssink2. https://bugzilla.gnome.org/show_bug.cgi?id=794816
2018-03-29 16:19:21 +00:00
case PROP_RESET_MUXER:
GST_OBJECT_LOCK (splitmux);
g_value_set_boolean (value, splitmux->reset_muxer);
GST_OBJECT_UNLOCK (splitmux);
break;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
default:
G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec);
break;
}
}
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
/* Convenience function */
static inline GstClockTimeDiff
my_segment_to_running_time (GstSegment * segment, GstClockTime val)
{
GstClockTimeDiff res = GST_CLOCK_STIME_NONE;
if (GST_CLOCK_TIME_IS_VALID (val)) {
gboolean sign =
gst_segment_to_running_time_full (segment, GST_FORMAT_TIME, val, &val);
if (sign > 0)
res = val;
else if (sign < 0)
res = -val;
}
return res;
}
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
static MqStreamCtx *
mq_stream_ctx_new (GstSplitMuxSink * splitmux)
{
MqStreamCtx *ctx;
ctx = g_new0 (MqStreamCtx, 1);
g_atomic_int_set (&ctx->refcount, 1);
ctx->splitmux = splitmux;
gst_segment_init (&ctx->in_segment, GST_FORMAT_UNDEFINED);
gst_segment_init (&ctx->out_segment, GST_FORMAT_UNDEFINED);
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
ctx->in_running_time = ctx->out_running_time = GST_CLOCK_STIME_NONE;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
g_queue_init (&ctx->queued_bufs);
return ctx;
}
static void
mq_stream_ctx_free (MqStreamCtx * ctx)
{
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
if (ctx->q) {
g_signal_handler_disconnect (ctx->q, ctx->q_overrun_id);
gst_element_set_locked_state (ctx->q, TRUE);
gst_element_set_state (ctx->q, GST_STATE_NULL);
gst_bin_remove (GST_BIN (ctx->splitmux), ctx->q);
gst_object_unref (ctx->q);
}
splitmuxsink: Add option for timecode-based split If this option is given, it will calculate the next split point based on timecode difference. https://bugzilla.gnome.org/show_bug.cgi?id=774209
2016-12-22 15:40:40 +00:00
gst_buffer_replace (&ctx->prev_in_keyframe, NULL);
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
gst_object_unref (ctx->sinkpad);
gst_object_unref (ctx->srcpad);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
g_queue_foreach (&ctx->queued_bufs, (GFunc) mq_stream_buf_free, NULL);
g_queue_clear (&ctx->queued_bufs);
g_free (ctx);
}
static void
mq_stream_ctx_unref (MqStreamCtx * ctx)
{
if (g_atomic_int_dec_and_test (&ctx->refcount))
mq_stream_ctx_free (ctx);
}
static void
mq_stream_ctx_ref (MqStreamCtx * ctx)
{
g_atomic_int_inc (&ctx->refcount);
}
static void
_pad_block_destroy_sink_notify (MqStreamCtx * ctx)
{
ctx->sink_pad_block_id = 0;
mq_stream_ctx_unref (ctx);
}
static void
_pad_block_destroy_src_notify (MqStreamCtx * ctx)
{
ctx->src_pad_block_id = 0;
mq_stream_ctx_unref (ctx);
}
splitmuxsink: post messages when fragments are being opened and closed This can be useful for applications that need to track the created fragments (to log them in a recording database, for example) https://bugzilla.gnome.org/show_bug.cgi?id=750108
2015-04-17 12:25:43 +00:00
static void
send_fragment_opened_closed_msg (GstSplitMuxSink * splitmux, gboolean opened)
{
gchar *location = NULL;
GstMessage *msg;
const gchar *msg_name = opened ?
"splitmuxsink-fragment-opened" : "splitmuxsink-fragment-closed";
g_object_get (splitmux->sink, "location", &location, NULL);
msg = gst_message_new_element (GST_OBJECT (splitmux),
gst_structure_new (msg_name,
"location", G_TYPE_STRING, location,
"running-time", GST_TYPE_CLOCK_TIME,
splitmux->reference_ctx->out_running_time, NULL));
gst_element_post_message (GST_ELEMENT_CAST (splitmux), msg);
g_free (location);
}
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
/* Called with lock held, drops the lock to send EOS to the
* pad
*/
static void
send_eos (GstSplitMuxSink * splitmux, MqStreamCtx * ctx)
{
GstEvent *eos;
GstPad *pad;
eos = gst_event_new_eos ();
pad = gst_pad_get_peer (ctx->srcpad);
ctx->out_eos = TRUE;
GST_INFO_OBJECT (splitmux, "Sending EOS on %" GST_PTR_FORMAT, pad);
GST_SPLITMUX_UNLOCK (splitmux);
gst_pad_send_event (pad, eos);
GST_SPLITMUX_LOCK (splitmux);
gst_object_unref (pad);
}
/* Called with splitmux lock held to check if this output
* context needs to sleep to wait for the release of the
* next GOP, or to send EOS to close out the current file
*/
static void
complete_or_wait_on_out (GstSplitMuxSink * splitmux, MqStreamCtx * ctx)
{
splitmuxsink: Change files on incompatible caps https://bugzilla.gnome.org/show_bug.cgi?id=761761
2017-02-15 19:48:58 +00:00
if (ctx->caps_change)
return;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
do {
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
/* When first starting up, the reference stream has to output
* the first buffer to prepare the muxer and sink */
gboolean can_output = (ctx->is_reference || splitmux->ready_for_output);
splitmuxsink: Add alignment-threshold argument If a non-reference stream is behind the reference stream by an amount of time smaller than the alignment threshold (in nsec), it counts as being after it. https://bugzilla.gnome.org/show_bug.cgi?id=782563
2017-05-12 14:53:57 +00:00
GstClockTimeDiff my_max_out_running_time = splitmux->max_out_running_time;
if (!(splitmux->max_out_running_time == 0 ||
splitmux->max_out_running_time == GST_CLOCK_STIME_NONE ||
splitmux->alignment_threshold == 0 ||
splitmux->max_out_running_time < splitmux->alignment_threshold)) {
my_max_out_running_time -= splitmux->alignment_threshold;
GST_LOG_OBJECT (ctx->srcpad,
"Max out running time currently %" GST_STIME_FORMAT
", with threshold applied it is %" GST_STIME_FORMAT,
GST_STIME_ARGS (splitmux->max_out_running_time),
GST_STIME_ARGS (my_max_out_running_time));
}
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
if (ctx->flushing
|| splitmux->output_state == SPLITMUX_OUTPUT_STATE_STOPPED)
return;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
GST_LOG_OBJECT (ctx->srcpad,
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
"Checking running time %" GST_STIME_FORMAT " against max %"
GST_STIME_FORMAT, GST_STIME_ARGS (ctx->out_running_time),
splitmuxsink: Add alignment-threshold argument If a non-reference stream is behind the reference stream by an amount of time smaller than the alignment threshold (in nsec), it counts as being after it. https://bugzilla.gnome.org/show_bug.cgi?id=782563
2017-05-12 14:53:57 +00:00
GST_STIME_ARGS (my_max_out_running_time));
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
if (can_output) {
if (splitmux->max_out_running_time == GST_CLOCK_STIME_NONE ||
splitmuxsink: Add alignment-threshold argument If a non-reference stream is behind the reference stream by an amount of time smaller than the alignment threshold (in nsec), it counts as being after it. https://bugzilla.gnome.org/show_bug.cgi?id=782563
2017-05-12 14:53:57 +00:00
ctx->out_running_time < my_max_out_running_time) {
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
return;
}
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
switch (splitmux->output_state) {
case SPLITMUX_OUTPUT_STATE_OUTPUT_GOP:
/* We only get here if we've finished outputting a GOP and need to know
* what to do next */
splitmux->output_state = SPLITMUX_OUTPUT_STATE_AWAITING_COMMAND;
GST_SPLITMUX_BROADCAST_OUTPUT (splitmux);
continue;
case SPLITMUX_OUTPUT_STATE_ENDING_FILE:
/* We've reached the max out running_time to get here, so end this file now */
if (ctx->out_eos == FALSE) {
send_eos (splitmux, ctx);
continue;
}
break;
case SPLITMUX_OUTPUT_STATE_START_NEXT_FILE:
if (ctx->is_reference) {
/* Special handling on the reference ctx to start new fragments
* and collect commands from the command queue */
/* drops the splitmux lock briefly: */
start_next_fragment (splitmux, ctx);
continue;
}
break;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
case SPLITMUX_OUTPUT_STATE_AWAITING_COMMAND:{
do {
SplitMuxOutputCommand *cmd =
g_queue_pop_tail (&splitmux->out_cmd_q);
if (cmd != NULL) {
/* If we pop the last command, we need to make our queues bigger */
if (g_queue_get_length (&splitmux->out_cmd_q) == 0)
grow_blocked_queues (splitmux);
if (cmd->start_new_fragment) {
GST_DEBUG_OBJECT (splitmux, "Got cmd to start new fragment");
splitmux->output_state = SPLITMUX_OUTPUT_STATE_ENDING_FILE;
} else {
GST_DEBUG_OBJECT (splitmux,
"Got new output cmd for time %" GST_STIME_FORMAT,
GST_STIME_ARGS (cmd->max_output_ts));
/* Extend the output range immediately */
splitmux->max_out_running_time = cmd->max_output_ts;
splitmux->output_state = SPLITMUX_OUTPUT_STATE_OUTPUT_GOP;
}
GST_SPLITMUX_BROADCAST_OUTPUT (splitmux);
out_cmd_buf_free (cmd);
break;
} else {
GST_SPLITMUX_WAIT_OUTPUT (splitmux);
}
} while (splitmux->output_state ==
SPLITMUX_OUTPUT_STATE_AWAITING_COMMAND);
/* loop and re-check the state */
continue;
}
case SPLITMUX_OUTPUT_STATE_STOPPED:
return;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
}
}
GST_INFO_OBJECT (ctx->srcpad,
"Sleeping for running time %"
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
GST_STIME_FORMAT " (max %" GST_STIME_FORMAT ") or state change.",
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
GST_STIME_ARGS (ctx->out_running_time),
GST_STIME_ARGS (splitmux->max_out_running_time));
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
GST_SPLITMUX_WAIT_OUTPUT (splitmux);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
GST_INFO_OBJECT (ctx->srcpad,
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
"Woken for new max running time %" GST_STIME_FORMAT,
GST_STIME_ARGS (splitmux->max_out_running_time));
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
}
while (1);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
}
splitmuxsink: Add option for timecode-based split If this option is given, it will calculate the next split point based on timecode difference. https://bugzilla.gnome.org/show_bug.cgi?id=774209
2016-12-22 15:40:40 +00:00
static GstClockTime
calculate_next_max_timecode (GstSplitMuxSink * splitmux,
const GstVideoTimeCode * cur_tc)
{
GstVideoTimeCode *target_tc;
GstVideoTimeCodeInterval *tc_inter;
GstClockTime cur_tc_time, target_tc_time, next_max_tc_time;
if (cur_tc == NULL || splitmux->threshold_timecode_str == NULL)
return GST_CLOCK_TIME_NONE;
tc_inter =
gst_video_time_code_interval_new_from_string
(splitmux->threshold_timecode_str);
target_tc = gst_video_time_code_add_interval (cur_tc, tc_inter);
gst_video_time_code_interval_free (tc_inter);
/* Convert to ns */
target_tc_time = gst_video_time_code_nsec_since_daily_jam (target_tc);
cur_tc_time = gst_video_time_code_nsec_since_daily_jam (cur_tc);
/* Add fragment_start_time, accounting for wraparound */
if (target_tc_time >= cur_tc_time) {
next_max_tc_time =
target_tc_time - cur_tc_time + splitmux->fragment_start_time;
} else {
GstClockTime day_in_ns = 24 * 60 * 60 * GST_SECOND;
next_max_tc_time =
day_in_ns - cur_tc_time + target_tc_time +
splitmux->fragment_start_time;
}
GST_INFO_OBJECT (splitmux, "Next max TC time: %" GST_TIME_FORMAT
" from ref TC: %" GST_TIME_FORMAT, GST_TIME_ARGS (next_max_tc_time),
GST_TIME_ARGS (cur_tc_time));
gst_video_time_code_free (target_tc);
return next_max_tc_time;
}
splitmuxsink: Add option to split at exactly max-size-time Will try to request a keyframe from the encoder to be sent at the target running time. https://bugzilla.gnome.org/show_bug.cgi?id=769664
2016-08-09 09:55:59 +00:00
static gboolean
splitmuxsink: Add option for timecode-based split If this option is given, it will calculate the next split point based on timecode difference. https://bugzilla.gnome.org/show_bug.cgi?id=774209
2016-12-22 15:40:40 +00:00
request_next_keyframe (GstSplitMuxSink * splitmux, GstBuffer * buffer)
splitmuxsink: Add option to split at exactly max-size-time Will try to request a keyframe from the encoder to be sent at the target running time. https://bugzilla.gnome.org/show_bug.cgi?id=769664
2016-08-09 09:55:59 +00:00
{
GstEvent *ev;
splitmuxsink: Add option for timecode-based split If this option is given, it will calculate the next split point based on timecode difference. https://bugzilla.gnome.org/show_bug.cgi?id=774209
2016-12-22 15:40:40 +00:00
GstClockTime target_time;
gboolean timecode_based = FALSE;
splitmux->next_max_tc_time = GST_CLOCK_TIME_NONE;
if (splitmux->threshold_timecode_str) {
GstVideoTimeCodeMeta *tc_meta;
if (buffer != NULL) {
tc_meta = gst_buffer_get_video_time_code_meta (buffer);
if (tc_meta) {
splitmux->next_max_tc_time =
calculate_next_max_timecode (splitmux, &tc_meta->tc);
timecode_based = (splitmux->next_max_tc_time != GST_CLOCK_TIME_NONE);
}
} else {
/* This can happen in the presence of GAP events that trigger
* a new fragment start */
GST_WARNING_OBJECT (splitmux,
"No buffer available to calculate next timecode");
}
}
splitmuxsink: Add option to split at exactly max-size-time Will try to request a keyframe from the encoder to be sent at the target running time. https://bugzilla.gnome.org/show_bug.cgi?id=769664
2016-08-09 09:55:59 +00:00
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
if (splitmux->send_keyframe_requests == FALSE
splitmuxsink: Add option for timecode-based split If this option is given, it will calculate the next split point based on timecode difference. https://bugzilla.gnome.org/show_bug.cgi?id=774209
2016-12-22 15:40:40 +00:00
|| (splitmux->threshold_time == 0 && !timecode_based)
|| splitmux->threshold_bytes != 0)
splitmuxsink: Add option to split at exactly max-size-time Will try to request a keyframe from the encoder to be sent at the target running time. https://bugzilla.gnome.org/show_bug.cgi?id=769664
2016-08-09 09:55:59 +00:00
return TRUE;
splitmuxsink: Add option for timecode-based split If this option is given, it will calculate the next split point based on timecode difference. https://bugzilla.gnome.org/show_bug.cgi?id=774209
2016-12-22 15:40:40 +00:00
if (timecode_based) {
/* We might have rounding errors: aim slightly earlier */
target_time = splitmux->next_max_tc_time - 5 * GST_USECOND;
} else {
target_time = splitmux->fragment_start_time + splitmux->threshold_time;
}
ev = gst_video_event_new_upstream_force_key_unit (target_time, TRUE, 0);
GST_INFO_OBJECT (splitmux, "Requesting next keyframe at %" GST_TIME_FORMAT,
GST_TIME_ARGS (target_time));
splitmuxsink: Add option to split at exactly max-size-time Will try to request a keyframe from the encoder to be sent at the target running time. https://bugzilla.gnome.org/show_bug.cgi?id=769664
2016-08-09 09:55:59 +00:00
return gst_pad_push_event (splitmux->reference_ctx->sinkpad, ev);
}
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
static GstPadProbeReturn
handle_mq_output (GstPad * pad, GstPadProbeInfo * info, MqStreamCtx * ctx)
{
GstSplitMuxSink *splitmux = ctx->splitmux;
MqStreamBuf *buf_info = NULL;
splitmuxsink: Remove stray carriage-return from debug
2016-05-13 11:20:28 +00:00
GST_LOG_OBJECT (pad, "Fired probe type 0x%x", info->type);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
/* FIXME: Handle buffer lists, until then make it clear they won't work */
if (info->type & GST_PAD_PROBE_TYPE_BUFFER_LIST) {
g_warning ("Buffer list handling not implemented");
return GST_PAD_PROBE_DROP;
}
splitmuxsink: Correctly catch FLUSH events in probes https://bugzilla.gnome.org/show_bug.cgi?id=767498
2017-04-20 10:17:35 +00:00
if (info->type & GST_PAD_PROBE_TYPE_EVENT_DOWNSTREAM ||
info->type & GST_PAD_PROBE_TYPE_EVENT_FLUSH) {
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
GstEvent *event = gst_pad_probe_info_get_event (info);
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
gboolean locked = FALSE;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
GST_LOG_OBJECT (pad, "Event %" GST_PTR_FORMAT, event);
switch (GST_EVENT_TYPE (event)) {
case GST_EVENT_SEGMENT:
gst_event_copy_segment (event, &ctx->out_segment);
break;
case GST_EVENT_FLUSH_STOP:
GST_SPLITMUX_LOCK (splitmux);
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
locked = TRUE;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
gst_segment_init (&ctx->out_segment, GST_FORMAT_UNDEFINED);
g_queue_foreach (&ctx->queued_bufs, (GFunc) mq_stream_buf_free, NULL);
g_queue_clear (&ctx->queued_bufs);
ctx->flushing = FALSE;
break;
case GST_EVENT_FLUSH_START:
GST_SPLITMUX_LOCK (splitmux);
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
locked = TRUE;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
GST_LOG_OBJECT (pad, "Flush start");
ctx->flushing = TRUE;
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
GST_SPLITMUX_BROADCAST_OUTPUT (splitmux);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
break;
case GST_EVENT_EOS:
GST_SPLITMUX_LOCK (splitmux);
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
locked = TRUE;
if (splitmux->output_state == SPLITMUX_OUTPUT_STATE_STOPPED)
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
goto beach;
ctx->out_eos = TRUE;
break;
case GST_EVENT_GAP:{
GstClockTime gap_ts;
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
GstClockTimeDiff rtime;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
gst_event_parse_gap (event, &gap_ts, NULL);
if (gap_ts == GST_CLOCK_TIME_NONE)
break;
GST_SPLITMUX_LOCK (splitmux);
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
locked = TRUE;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
if (splitmux->output_state == SPLITMUX_OUTPUT_STATE_STOPPED)
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
goto beach;
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
splitmuxsink: Add format-location-full signal Add a new signal for formatting the filename, which receives a GstSample containing the first buffer from the reference stream that will be muxed into that file. Useful for creating filenames that are based on the running time or other attributes of the buffer. To make it work, opening of files and setting filenames is now deferred until there is some data to write to it, which also requires some changes to how async state changes and gap events are handled.
2016-11-17 12:40:27 +00:00
/* When we get a gap event on the
* reference stream and we're trying to open a
* new file, we need to store it until we get
* the buffer afterwards
*/
if (ctx->is_reference &&
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
(splitmux->output_state != SPLITMUX_OUTPUT_STATE_OUTPUT_GOP)) {
splitmuxsink: Add format-location-full signal Add a new signal for formatting the filename, which receives a GstSample containing the first buffer from the reference stream that will be muxed into that file. Useful for creating filenames that are based on the running time or other attributes of the buffer. To make it work, opening of files and setting filenames is now deferred until there is some data to write to it, which also requires some changes to how async state changes and gap events are handled.
2016-11-17 12:40:27 +00:00
GST_DEBUG_OBJECT (pad, "Storing GAP event until buffer arrives");
gst_event_replace (&ctx->pending_gap, event);
GST_SPLITMUX_UNLOCK (splitmux);
return GST_PAD_PROBE_HANDLED;
}
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
rtime = my_segment_to_running_time (&ctx->out_segment, gap_ts);
GST_LOG_OBJECT (pad, "Have GAP w/ ts %" GST_STIME_FORMAT,
GST_STIME_ARGS (rtime));
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
if (rtime != GST_CLOCK_STIME_NONE) {
ctx->out_running_time = rtime;
complete_or_wait_on_out (splitmux, ctx);
}
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
break;
}
splitmuxsink: Fix occasional deadlock when ending file with subtitle Deadlock occurs when splitting files if one stream received no buffer during the first GOP of the next file. That can happen in that scenario for example: 1) The first GOP of video is collected, it has a duration of 10s. max_in_running_time is set to 10s. 2) Other streams catchup and we receive the first subtitle buffer at ts=0 and has a duration of 1min. 3) We receive the 2nd subtitle buffer with a ts=1min. in_running_time is set to 1min. That buffer is blocked in handle_mq_input() because max_in_running_time is still 10s. 4) Since all in_running_time are now > 10s, max_out_running_time is now set to 10s. That first GOP gets recorded into the file. The muxer pop buffers out of the mq, when it tries to pop a 2nd subtitle buffer it blocks because the GstDataQueue is empty. 5) A 2nd GOP of video is collected and has a duration of 10s as well. max_in_running_time is now 20s. Since subtitle's in_running_time is already 1min, that GOP is already complete. 6) But let's say we overran the max file size, we thus set state to SPLITMUX_STATE_ENDING_FILE now. As soon as a buffer with ts > 10s (end of previous GOP) arrives in handle_mq_output(), EOS event is sent downstream instead. But since the subtitle queue is empty, that's never going to happen. Pipeline is now deadlocked. To fix this situation we have to: - Send a dummy event through the queue to wakeup output thread. - Update out_running_time to at least max_out_running_time so it sends EOS. - Respect time order, so we set out_running_tim=max_in_running_time because that's bigger than previous buffer and smaller than next. https://bugzilla.gnome.org/show_bug.cgi?id=763711
2016-03-18 19:45:01 +00:00
case GST_EVENT_CUSTOM_DOWNSTREAM:{
const GstStructure *s;
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
GstClockTimeDiff ts = 0;
splitmuxsink: Fix occasional deadlock when ending file with subtitle Deadlock occurs when splitting files if one stream received no buffer during the first GOP of the next file. That can happen in that scenario for example: 1) The first GOP of video is collected, it has a duration of 10s. max_in_running_time is set to 10s. 2) Other streams catchup and we receive the first subtitle buffer at ts=0 and has a duration of 1min. 3) We receive the 2nd subtitle buffer with a ts=1min. in_running_time is set to 1min. That buffer is blocked in handle_mq_input() because max_in_running_time is still 10s. 4) Since all in_running_time are now > 10s, max_out_running_time is now set to 10s. That first GOP gets recorded into the file. The muxer pop buffers out of the mq, when it tries to pop a 2nd subtitle buffer it blocks because the GstDataQueue is empty. 5) A 2nd GOP of video is collected and has a duration of 10s as well. max_in_running_time is now 20s. Since subtitle's in_running_time is already 1min, that GOP is already complete. 6) But let's say we overran the max file size, we thus set state to SPLITMUX_STATE_ENDING_FILE now. As soon as a buffer with ts > 10s (end of previous GOP) arrives in handle_mq_output(), EOS event is sent downstream instead. But since the subtitle queue is empty, that's never going to happen. Pipeline is now deadlocked. To fix this situation we have to: - Send a dummy event through the queue to wakeup output thread. - Update out_running_time to at least max_out_running_time so it sends EOS. - Respect time order, so we set out_running_tim=max_in_running_time because that's bigger than previous buffer and smaller than next. https://bugzilla.gnome.org/show_bug.cgi?id=763711
2016-03-18 19:45:01 +00:00
s = gst_event_get_structure (event);
if (!gst_structure_has_name (s, "splitmuxsink-unblock"))
break;
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
gst_structure_get_int64 (s, "timestamp", &ts);
splitmuxsink: Fix occasional deadlock when ending file with subtitle Deadlock occurs when splitting files if one stream received no buffer during the first GOP of the next file. That can happen in that scenario for example: 1) The first GOP of video is collected, it has a duration of 10s. max_in_running_time is set to 10s. 2) Other streams catchup and we receive the first subtitle buffer at ts=0 and has a duration of 1min. 3) We receive the 2nd subtitle buffer with a ts=1min. in_running_time is set to 1min. That buffer is blocked in handle_mq_input() because max_in_running_time is still 10s. 4) Since all in_running_time are now > 10s, max_out_running_time is now set to 10s. That first GOP gets recorded into the file. The muxer pop buffers out of the mq, when it tries to pop a 2nd subtitle buffer it blocks because the GstDataQueue is empty. 5) A 2nd GOP of video is collected and has a duration of 10s as well. max_in_running_time is now 20s. Since subtitle's in_running_time is already 1min, that GOP is already complete. 6) But let's say we overran the max file size, we thus set state to SPLITMUX_STATE_ENDING_FILE now. As soon as a buffer with ts > 10s (end of previous GOP) arrives in handle_mq_output(), EOS event is sent downstream instead. But since the subtitle queue is empty, that's never going to happen. Pipeline is now deadlocked. To fix this situation we have to: - Send a dummy event through the queue to wakeup output thread. - Update out_running_time to at least max_out_running_time so it sends EOS. - Respect time order, so we set out_running_tim=max_in_running_time because that's bigger than previous buffer and smaller than next. https://bugzilla.gnome.org/show_bug.cgi?id=763711
2016-03-18 19:45:01 +00:00
GST_SPLITMUX_LOCK (splitmux);
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
locked = TRUE;
splitmuxsink: Fix occasional deadlock when ending file with subtitle Deadlock occurs when splitting files if one stream received no buffer during the first GOP of the next file. That can happen in that scenario for example: 1) The first GOP of video is collected, it has a duration of 10s. max_in_running_time is set to 10s. 2) Other streams catchup and we receive the first subtitle buffer at ts=0 and has a duration of 1min. 3) We receive the 2nd subtitle buffer with a ts=1min. in_running_time is set to 1min. That buffer is blocked in handle_mq_input() because max_in_running_time is still 10s. 4) Since all in_running_time are now > 10s, max_out_running_time is now set to 10s. That first GOP gets recorded into the file. The muxer pop buffers out of the mq, when it tries to pop a 2nd subtitle buffer it blocks because the GstDataQueue is empty. 5) A 2nd GOP of video is collected and has a duration of 10s as well. max_in_running_time is now 20s. Since subtitle's in_running_time is already 1min, that GOP is already complete. 6) But let's say we overran the max file size, we thus set state to SPLITMUX_STATE_ENDING_FILE now. As soon as a buffer with ts > 10s (end of previous GOP) arrives in handle_mq_output(), EOS event is sent downstream instead. But since the subtitle queue is empty, that's never going to happen. Pipeline is now deadlocked. To fix this situation we have to: - Send a dummy event through the queue to wakeup output thread. - Update out_running_time to at least max_out_running_time so it sends EOS. - Respect time order, so we set out_running_tim=max_in_running_time because that's bigger than previous buffer and smaller than next. https://bugzilla.gnome.org/show_bug.cgi?id=763711
2016-03-18 19:45:01 +00:00
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
if (splitmux->output_state == SPLITMUX_OUTPUT_STATE_STOPPED)
splitmuxsink: Fix occasional deadlock when ending file with subtitle Deadlock occurs when splitting files if one stream received no buffer during the first GOP of the next file. That can happen in that scenario for example: 1) The first GOP of video is collected, it has a duration of 10s. max_in_running_time is set to 10s. 2) Other streams catchup and we receive the first subtitle buffer at ts=0 and has a duration of 1min. 3) We receive the 2nd subtitle buffer with a ts=1min. in_running_time is set to 1min. That buffer is blocked in handle_mq_input() because max_in_running_time is still 10s. 4) Since all in_running_time are now > 10s, max_out_running_time is now set to 10s. That first GOP gets recorded into the file. The muxer pop buffers out of the mq, when it tries to pop a 2nd subtitle buffer it blocks because the GstDataQueue is empty. 5) A 2nd GOP of video is collected and has a duration of 10s as well. max_in_running_time is now 20s. Since subtitle's in_running_time is already 1min, that GOP is already complete. 6) But let's say we overran the max file size, we thus set state to SPLITMUX_STATE_ENDING_FILE now. As soon as a buffer with ts > 10s (end of previous GOP) arrives in handle_mq_output(), EOS event is sent downstream instead. But since the subtitle queue is empty, that's never going to happen. Pipeline is now deadlocked. To fix this situation we have to: - Send a dummy event through the queue to wakeup output thread. - Update out_running_time to at least max_out_running_time so it sends EOS. - Respect time order, so we set out_running_tim=max_in_running_time because that's bigger than previous buffer and smaller than next. https://bugzilla.gnome.org/show_bug.cgi?id=763711
2016-03-18 19:45:01 +00:00
goto beach;
ctx->out_running_time = ts;
splitmuxsink: Add format-location-full signal Add a new signal for formatting the filename, which receives a GstSample containing the first buffer from the reference stream that will be muxed into that file. Useful for creating filenames that are based on the running time or other attributes of the buffer. To make it work, opening of files and setting filenames is now deferred until there is some data to write to it, which also requires some changes to how async state changes and gap events are handled.
2016-11-17 12:40:27 +00:00
if (!ctx->is_reference)
complete_or_wait_on_out (splitmux, ctx);
splitmuxsink: Fix occasional deadlock when ending file with subtitle Deadlock occurs when splitting files if one stream received no buffer during the first GOP of the next file. That can happen in that scenario for example: 1) The first GOP of video is collected, it has a duration of 10s. max_in_running_time is set to 10s. 2) Other streams catchup and we receive the first subtitle buffer at ts=0 and has a duration of 1min. 3) We receive the 2nd subtitle buffer with a ts=1min. in_running_time is set to 1min. That buffer is blocked in handle_mq_input() because max_in_running_time is still 10s. 4) Since all in_running_time are now > 10s, max_out_running_time is now set to 10s. That first GOP gets recorded into the file. The muxer pop buffers out of the mq, when it tries to pop a 2nd subtitle buffer it blocks because the GstDataQueue is empty. 5) A 2nd GOP of video is collected and has a duration of 10s as well. max_in_running_time is now 20s. Since subtitle's in_running_time is already 1min, that GOP is already complete. 6) But let's say we overran the max file size, we thus set state to SPLITMUX_STATE_ENDING_FILE now. As soon as a buffer with ts > 10s (end of previous GOP) arrives in handle_mq_output(), EOS event is sent downstream instead. But since the subtitle queue is empty, that's never going to happen. Pipeline is now deadlocked. To fix this situation we have to: - Send a dummy event through the queue to wakeup output thread. - Update out_running_time to at least max_out_running_time so it sends EOS. - Respect time order, so we set out_running_tim=max_in_running_time because that's bigger than previous buffer and smaller than next. https://bugzilla.gnome.org/show_bug.cgi?id=763711
2016-03-18 19:45:01 +00:00
GST_SPLITMUX_UNLOCK (splitmux);
return GST_PAD_PROBE_DROP;
}
splitmuxsink: Change files on incompatible caps https://bugzilla.gnome.org/show_bug.cgi?id=761761
2017-02-15 19:48:58 +00:00
case GST_EVENT_CAPS:{
GstPad *peer;
if (!ctx->is_reference)
break;
peer = gst_pad_get_peer (pad);
if (peer) {
gboolean ok = gst_pad_send_event (peer, gst_event_ref (event));
gst_object_unref (peer);
if (ok)
break;
splitmux: Fix file switch-on-caps-change. Switching to a new fragment because the input caps have changed didn't properly end the previous file. Use the normal EOS sequence to ensure that happens. Add a test that it works.
2017-11-24 05:56:03 +00:00
splitmuxsink: Change files on incompatible caps https://bugzilla.gnome.org/show_bug.cgi?id=761761
2017-02-15 19:48:58 +00:00
} else {
break;
}
/* This is in the case the muxer doesn't allow this change of caps */
GST_SPLITMUX_LOCK (splitmux);
locked = TRUE;
ctx->caps_change = TRUE;
if (splitmux->output_state != SPLITMUX_OUTPUT_STATE_START_NEXT_FILE) {
splitmux: Fix file switch-on-caps-change. Switching to a new fragment because the input caps have changed didn't properly end the previous file. Use the normal EOS sequence to ensure that happens. Add a test that it works.
2017-11-24 05:56:03 +00:00
GST_DEBUG_OBJECT (splitmux,
"New caps were not accepted. Switching output file");
splitmuxsink: Change files on incompatible caps https://bugzilla.gnome.org/show_bug.cgi?id=761761
2017-02-15 19:48:58 +00:00
if (ctx->out_eos == FALSE) {
splitmux: Fix file switch-on-caps-change. Switching to a new fragment because the input caps have changed didn't properly end the previous file. Use the normal EOS sequence to ensure that happens. Add a test that it works.
2017-11-24 05:56:03 +00:00
splitmux->output_state = SPLITMUX_OUTPUT_STATE_ENDING_FILE;
GST_SPLITMUX_BROADCAST_OUTPUT (splitmux);
splitmuxsink: Change files on incompatible caps https://bugzilla.gnome.org/show_bug.cgi?id=761761
2017-02-15 19:48:58 +00:00
}
}
/* Lets it fall through, if it fails again, then the muxer just can't
* support this format, but at least we have a closed file.
*/
break;
}
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
default:
break;
}
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
/* We need to make sure events aren't passed
* until the muxer / sink are ready for it */
if (!locked)
GST_SPLITMUX_LOCK (splitmux);
if (!ctx->is_reference)
complete_or_wait_on_out (splitmux, ctx);
GST_SPLITMUX_UNLOCK (splitmux);
splitmuxsink: Change files on incompatible caps https://bugzilla.gnome.org/show_bug.cgi?id=761761
2017-02-15 19:48:58 +00:00
/* Don't try to forward sticky events before the next buffer is there
* because it would cause a new file to be created without the first
* buffer being available.
*/
splitmux: Fix file switch-on-caps-change. Switching to a new fragment because the input caps have changed didn't properly end the previous file. Use the normal EOS sequence to ensure that happens. Add a test that it works.
2017-11-24 05:56:03 +00:00
if (ctx->caps_change && GST_EVENT_IS_STICKY (event)) {
gst_event_unref (event);
return GST_PAD_PROBE_HANDLED;
} else
splitmuxsink: Change files on incompatible caps https://bugzilla.gnome.org/show_bug.cgi?id=761761
2017-02-15 19:48:58 +00:00
return GST_PAD_PROBE_PASS;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
}
/* Allow everything through until the configured next stopping point */
GST_SPLITMUX_LOCK (splitmux);
buf_info = g_queue_pop_tail (&ctx->queued_bufs);
if (buf_info == NULL)
/* Can only happen due to a poorly timed flush */
goto beach;
/* If we have popped a keyframe, decrement the queued_gop count */
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
if (buf_info->keyframe && splitmux->queued_keyframes > 0)
splitmux->queued_keyframes--;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
ctx->out_running_time = buf_info->run_ts;
splitmuxsink: Add option for timecode-based split If this option is given, it will calculate the next split point based on timecode difference. https://bugzilla.gnome.org/show_bug.cgi?id=774209
2016-12-22 15:40:40 +00:00
ctx->cur_out_buffer = gst_pad_probe_info_get_buffer (info);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
GST_LOG_OBJECT (splitmux,
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
"Pad %" GST_PTR_FORMAT " buffer with run TS %" GST_STIME_FORMAT
Fixed splitmuxsink 32-bit overflow bug Extend the byte tracking counters to 64-bit on all platforms, instead of using gsize, which overflows after 4GB. https://bugzilla.gnome.org/show_bug.cgi?id=770019
2016-08-20 08:59:30 +00:00
" size %" G_GUINT64_FORMAT,
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
pad, GST_STIME_ARGS (ctx->out_running_time), buf_info->buf_size);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmuxsink: Change files on incompatible caps https://bugzilla.gnome.org/show_bug.cgi?id=761761
2017-02-15 19:48:58 +00:00
ctx->caps_change = FALSE;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
complete_or_wait_on_out (splitmux, ctx);
splitmux->muxed_out_bytes += buf_info->buf_size;
#ifndef GST_DISABLE_GST_DEBUG
{
GstBuffer *buf = gst_pad_probe_info_get_buffer (info);
GST_LOG_OBJECT (pad, "Returning to pass buffer %" GST_PTR_FORMAT
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
" run ts %" GST_STIME_FORMAT, buf,
GST_STIME_ARGS (ctx->out_running_time));
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
}
#endif
splitmuxsink: Add option for timecode-based split If this option is given, it will calculate the next split point based on timecode difference. https://bugzilla.gnome.org/show_bug.cgi?id=774209
2016-12-22 15:40:40 +00:00
ctx->cur_out_buffer = NULL;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
GST_SPLITMUX_UNLOCK (splitmux);
splitmuxsink: Add format-location-full signal Add a new signal for formatting the filename, which receives a GstSample containing the first buffer from the reference stream that will be muxed into that file. Useful for creating filenames that are based on the running time or other attributes of the buffer. To make it work, opening of files and setting filenames is now deferred until there is some data to write to it, which also requires some changes to how async state changes and gap events are handled.
2016-11-17 12:40:27 +00:00
/* pending_gap is protected by the STREAM lock */
if (ctx->pending_gap) {
/* If we previously stored a gap event, send it now */
GstPad *peer = gst_pad_get_peer (ctx->srcpad);
GST_DEBUG_OBJECT (splitmux,
"Pad %" GST_PTR_FORMAT " sending pending GAP event", ctx->srcpad);
gst_pad_send_event (peer, ctx->pending_gap);
ctx->pending_gap = NULL;
gst_object_unref (peer);
}
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
mq_stream_buf_free (buf_info);
return GST_PAD_PROBE_PASS;
beach:
GST_SPLITMUX_UNLOCK (splitmux);
return GST_PAD_PROBE_DROP;
}
static gboolean
resend_sticky (GstPad * pad, GstEvent ** event, GstPad * peer)
{
return gst_pad_send_event (peer, gst_event_ref (*event));
}
static void
restart_context (MqStreamCtx * ctx, GstSplitMuxSink * splitmux)
{
GstPad *peer = gst_pad_get_peer (ctx->srcpad);
gst_pad_sticky_events_foreach (ctx->srcpad,
(GstPadStickyEventsForeachFunction) (resend_sticky), peer);
splitmux: Handle a hang draining out at EOS Make sure that all data is drained out when the reference pad goes EOS. Fixes a problem where data that arrives on other pads after the reference pad finishes can stall forever and never pass EOS. https://bugzilla.gnome.org/show_bug.cgi?id=763711
2016-03-30 15:15:04 +00:00
/* Clear EOS flag if not actually EOS */
ctx->out_eos = GST_PAD_IS_EOS (ctx->srcpad);
splitmux: Add unit test for file splitting Add a unit test for file splitting, and fix the leaks in the splitmuxsink it found
2015-02-06 14:41:49 +00:00
gst_object_unref (peer);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
}
splitmuxsink: Add new reset-muxer property With this the muxer is not set to NULL after each segment but instead only flush events are sent to it to reset the EOS state. As a result, the muxer will keep stream state and e.g. mpegtsmux will keep the packet continuity counter continuous between segments as needed by hlssink2. https://bugzilla.gnome.org/show_bug.cgi?id=794816
2018-03-29 16:19:21 +00:00
static void
_send_event (const GValue * value, gpointer user_data)
{
GstPad *pad = g_value_get_object (value);
GstEvent *ev = user_data;
gst_pad_send_event (pad, gst_event_ref (ev));
}
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
/* Called with lock held when a fragment
* reaches EOS and it is time to restart
* a new fragment
*/
static void
splitmuxsink: Add format-location-full signal Add a new signal for formatting the filename, which receives a GstSample containing the first buffer from the reference stream that will be muxed into that file. Useful for creating filenames that are based on the running time or other attributes of the buffer. To make it work, opening of files and setting filenames is now deferred until there is some data to write to it, which also requires some changes to how async state changes and gap events are handled.
2016-11-17 12:40:27 +00:00
start_next_fragment (GstSplitMuxSink * splitmux, MqStreamCtx * ctx)
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
{
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
GstElement *muxer, *sink;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
/* 1 change to new file */
Revert "splitmuxsink: Use GstBin async-handling instead of our own." This reverts commit fa008f271a52f82dededc28bd81b020ca7939b47. async-handling in GstBin causes the pipeline to spin at 100% CPU as the top-level pipeline tries to change that state to PLAYING constantly. This is a workaround for a core problem, essentially, but an improvement in this case for now.
2016-08-07 16:53:48 +00:00
splitmux->switching_fragment = TRUE;
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
/* We need to drop the splitmux lock to acquire the state lock
* here and ensure there's no racy state change going on elsewhere */
muxer = gst_object_ref (splitmux->muxer);
sink = gst_object_ref (splitmux->active_sink);
GST_SPLITMUX_UNLOCK (splitmux);
GST_STATE_LOCK (splitmux);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
gst_element_set_locked_state (muxer, TRUE);
gst_element_set_locked_state (sink, TRUE);
gst_element_set_state (sink, GST_STATE_NULL);
splitmuxsink: Add new reset-muxer property With this the muxer is not set to NULL after each segment but instead only flush events are sent to it to reset the EOS state. As a result, the muxer will keep stream state and e.g. mpegtsmux will keep the packet continuity counter continuous between segments as needed by hlssink2. https://bugzilla.gnome.org/show_bug.cgi?id=794816
2018-03-29 16:19:21 +00:00
if (splitmux->reset_muxer) {
gst_element_set_state (muxer, GST_STATE_NULL);
} else {
GstIterator *it = gst_element_iterate_sink_pads (muxer);
GstEvent *ev;
ev = gst_event_new_flush_start ();
gst_iterator_foreach (it, _send_event, ev);
gst_event_unref (ev);
gst_iterator_resync (it);
ev = gst_event_new_flush_stop (TRUE);
gst_iterator_foreach (it, _send_event, ev);
gst_event_unref (ev);
gst_iterator_free (it);
}
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
GST_SPLITMUX_LOCK (splitmux);
splitmuxsink: Change files on incompatible caps https://bugzilla.gnome.org/show_bug.cgi?id=761761
2017-02-15 19:48:58 +00:00
if (splitmux->muxed_out_bytes > 0 || splitmux->fragment_id == 0)
set_next_filename (splitmux, ctx);
splitmux->muxed_out_bytes = 0;
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
GST_SPLITMUX_UNLOCK (splitmux);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
gst_element_set_state (sink, GST_STATE_TARGET (splitmux));
gst_element_set_state (muxer, GST_STATE_TARGET (splitmux));
gst_element_set_locked_state (muxer, FALSE);
gst_element_set_locked_state (sink, FALSE);
splitmuxsink: Hide internal async state changes. When switching fragments, hide the async-start/async-done messages from the parent bin, as otherwise we sometimes (very rarely) hang in PAUSED instead of returning / continuing to PLAYING state.
2016-05-14 08:32:52 +00:00
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
gst_object_unref (sink);
gst_object_unref (muxer);
GST_SPLITMUX_LOCK (splitmux);
GST_STATE_UNLOCK (splitmux);
Revert "splitmuxsink: Use GstBin async-handling instead of our own." This reverts commit fa008f271a52f82dededc28bd81b020ca7939b47. async-handling in GstBin causes the pipeline to spin at 100% CPU as the top-level pipeline tries to change that state to PLAYING constantly. This is a workaround for a core problem, essentially, but an improvement in this case for now.
2016-08-07 16:53:48 +00:00
splitmux->switching_fragment = FALSE;
splitmuxsink: Add format-location-full signal Add a new signal for formatting the filename, which receives a GstSample containing the first buffer from the reference stream that will be muxed into that file. Useful for creating filenames that are based on the running time or other attributes of the buffer. To make it work, opening of files and setting filenames is now deferred until there is some data to write to it, which also requires some changes to how async state changes and gap events are handled.
2016-11-17 12:40:27 +00:00
do_async_done (splitmux);
Revert "splitmuxsink: Use GstBin async-handling instead of our own." This reverts commit fa008f271a52f82dededc28bd81b020ca7939b47. async-handling in GstBin causes the pipeline to spin at 100% CPU as the top-level pipeline tries to change that state to PLAYING constantly. This is a workaround for a core problem, essentially, but an improvement in this case for now.
2016-08-07 16:53:48 +00:00
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
splitmux->ready_for_output = TRUE;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
g_list_foreach (splitmux->contexts, (GFunc) restart_context, splitmux);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmuxsink: post messages when fragments are being opened and closed This can be useful for applications that need to track the created fragments (to log them in a recording database, for example) https://bugzilla.gnome.org/show_bug.cgi?id=750108
2015-04-17 12:25:43 +00:00
send_fragment_opened_closed_msg (splitmux, TRUE);
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
/* FIXME: Is this always the correct next state? */
splitmux->output_state = SPLITMUX_OUTPUT_STATE_AWAITING_COMMAND;
GST_SPLITMUX_BROADCAST_OUTPUT (splitmux);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
}
static void
bus_handler (GstBin * bin, GstMessage * message)
{
GstSplitMuxSink *splitmux = GST_SPLITMUX_SINK (bin);
switch (GST_MESSAGE_TYPE (message)) {
case GST_MESSAGE_EOS:
/* If the state is draining out the current file, drop this EOS */
GST_SPLITMUX_LOCK (splitmux);
splitmuxsink: post messages when fragments are being opened and closed This can be useful for applications that need to track the created fragments (to log them in a recording database, for example) https://bugzilla.gnome.org/show_bug.cgi?id=750108
2015-04-17 12:25:43 +00:00
send_fragment_opened_closed_msg (splitmux, FALSE);
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
if (splitmux->output_state == SPLITMUX_OUTPUT_STATE_ENDING_FILE) {
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
GST_DEBUG_OBJECT (splitmux, "Caught EOS at end of fragment, dropping");
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
splitmux->output_state = SPLITMUX_OUTPUT_STATE_START_NEXT_FILE;
GST_SPLITMUX_BROADCAST_OUTPUT (splitmux);
Revert "splitmuxsink: Mask async-start/done while switching files." This reverts commit d61e5393f110ed482815d77807245d78b52eff46. Causes failures muxing larger GOP sizes for some reason. Reverting while I figure it out
2015-06-23 06:28:40 +00:00
gst_message_unref (message);
GST_SPLITMUX_UNLOCK (splitmux);
return;
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
} else {
GST_DEBUG_OBJECT (splitmux,
"Passing EOS message. Output state %d max_out_running_time %"
GST_STIME_FORMAT, splitmux->output_state,
GST_STIME_ARGS (splitmux->max_out_running_time));
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
}
GST_SPLITMUX_UNLOCK (splitmux);
break;
Revert "splitmuxsink: Use GstBin async-handling instead of our own." This reverts commit fa008f271a52f82dededc28bd81b020ca7939b47. async-handling in GstBin causes the pipeline to spin at 100% CPU as the top-level pipeline tries to change that state to PLAYING constantly. This is a workaround for a core problem, essentially, but an improvement in this case for now.
2016-08-07 16:53:48 +00:00
case GST_MESSAGE_ASYNC_START:
case GST_MESSAGE_ASYNC_DONE:
/* Ignore state changes from our children while switching */
if (splitmux->switching_fragment) {
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
if (GST_MESSAGE_SRC (message) == (GstObject *) splitmux->active_sink
|| GST_MESSAGE_SRC (message) == (GstObject *) splitmux->muxer) {
Revert "splitmuxsink: Use GstBin async-handling instead of our own." This reverts commit fa008f271a52f82dededc28bd81b020ca7939b47. async-handling in GstBin causes the pipeline to spin at 100% CPU as the top-level pipeline tries to change that state to PLAYING constantly. This is a workaround for a core problem, essentially, but an improvement in this case for now.
2016-08-07 16:53:48 +00:00
GST_LOG_OBJECT (splitmux,
"Ignoring state change from child %" GST_PTR_FORMAT
" while switching", GST_MESSAGE_SRC (message));
gst_message_unref (message);
return;
}
}
break;
qtmux: send stream warning when refusing video caps If codec_data is changed, the stream is no longer valid. Rather than keeping running when refusing new caps, this patch send a warning to the bus. Also fix up splitmuxsink to ignore this warning while changing caps. https://bugzilla.gnome.org/show_bug.cgi?id=790000
2017-12-04 11:12:40 +00:00
case GST_MESSAGE_WARNING:
{
GError *gerror = NULL;
gst_message_parse_warning (message, &gerror, NULL);
if (g_error_matches (gerror, GST_STREAM_ERROR, GST_STREAM_ERROR_FORMAT)) {
GList *item;
gboolean caps_change = FALSE;
GST_SPLITMUX_LOCK (splitmux);
for (item = splitmux->contexts; item; item = item->next) {
MqStreamCtx *ctx = item->data;
if (ctx->caps_change) {
caps_change = TRUE;
break;
}
}
GST_SPLITMUX_UNLOCK (splitmux);
if (caps_change) {
GST_LOG_OBJECT (splitmux,
"Ignoring warning change from child %" GST_PTR_FORMAT
" while switching caps", GST_MESSAGE_SRC (message));
gst_message_unref (message);
return;
}
}
break;
}
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
default:
break;
}
GST_BIN_CLASS (parent_class)->handle_message (bin, message);
}
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
static void
ctx_set_unblock (MqStreamCtx * ctx)
{
ctx->need_unblock = TRUE;
}
splitmuxsink: Use muxer reserved space properties if present. If the use-robust-muxing property is set, check if the assigned muxer has reserved-max-duration and reserved-duration-remaining properties, and if so set the configured maximum duration to the reserved-max-duration property, and monitor the remaining space to start a new file if the reserved header space is about to run out - even though it never ought to.
2015-04-07 13:53:19 +00:00
static gboolean
need_new_fragment (GstSplitMuxSink * splitmux,
GstClockTime queued_time, GstClockTime queued_gop_time,
guint64 queued_bytes)
{
guint64 thresh_bytes;
GstClockTime thresh_time;
gboolean check_robust_muxing;
GST_OBJECT_LOCK (splitmux);
thresh_bytes = splitmux->threshold_bytes;
thresh_time = splitmux->threshold_time;
check_robust_muxing = splitmux->use_robust_muxing
&& splitmux->muxer_has_reserved_props;
GST_OBJECT_UNLOCK (splitmux);
/* Have we muxed anything into the new file at all? */
if (splitmux->fragment_total_bytes <= 0)
return FALSE;
splitmuxsink: added a "split now" action signal Now, the video file can be split at an arbitrary time chosen by the user. https://bugzilla.gnome.org/show_bug.cgi?id=787922
2017-09-21 15:23:54 +00:00
/* User told us to split now */
if (g_atomic_int_get (&(splitmux->split_now)) == TRUE)
return TRUE;
splitmuxsink: Allow splitting at exactly the time/bytes threshold 76e458a119926424e9dd5acf3210a592a314d713 changed the conditions from "queued > threshold" to "queued >= threshold", which broke hlssink2 and resulting in too small fragments being created although keyframes would be at *exactly* the configured threshold. https://bugzilla.gnome.org/show_bug.cgi?id=794440
2018-03-19 08:58:28 +00:00
if (thresh_bytes > 0 && queued_bytes > thresh_bytes)
splitmuxsink: Use muxer reserved space properties if present. If the use-robust-muxing property is set, check if the assigned muxer has reserved-max-duration and reserved-duration-remaining properties, and if so set the configured maximum duration to the reserved-max-duration property, and monitor the remaining space to start a new file if the reserved header space is about to run out - even though it never ought to.
2015-04-07 13:53:19 +00:00
return TRUE; /* Would overrun byte limit */
splitmuxsink: Allow splitting at exactly the time/bytes threshold 76e458a119926424e9dd5acf3210a592a314d713 changed the conditions from "queued > threshold" to "queued >= threshold", which broke hlssink2 and resulting in too small fragments being created although keyframes would be at *exactly* the configured threshold. https://bugzilla.gnome.org/show_bug.cgi?id=794440
2018-03-19 08:58:28 +00:00
if (thresh_time > 0 && queued_time > thresh_time)
splitmuxsink: Use muxer reserved space properties if present. If the use-robust-muxing property is set, check if the assigned muxer has reserved-max-duration and reserved-duration-remaining properties, and if so set the configured maximum duration to the reserved-max-duration property, and monitor the remaining space to start a new file if the reserved header space is about to run out - even though it never ought to.
2015-04-07 13:53:19 +00:00
return TRUE; /* Would overrun byte limit */
/* Timecode-based threshold accounts for possible rounding errors:
* 5us should be bigger than all possible rounding errors but nowhere near
* big enough to skip to another frame */
if (splitmux->next_max_tc_time != GST_CLOCK_TIME_NONE &&
splitmux->reference_ctx->in_running_time >
splitmux->next_max_tc_time + 5 * GST_USECOND)
return TRUE; /* Timecode threshold */
if (check_robust_muxing) {
GstClockTime mux_reserved_remain;
g_object_get (splitmux->muxer,
"reserved-duration-remaining", &mux_reserved_remain, NULL);
GST_LOG_OBJECT (splitmux,
"Muxer robust muxing report - %" G_GUINT64_FORMAT
" remaining. New GOP would enqueue %" G_GUINT64_FORMAT,
mux_reserved_remain, queued_gop_time);
if (queued_gop_time >= mux_reserved_remain) {
GST_INFO_OBJECT (splitmux,
"File is about to run out of header room - %" G_GUINT64_FORMAT
" remaining. New GOP would enqueue %" G_GUINT64_FORMAT
". Switching to new file", mux_reserved_remain, queued_gop_time);
return TRUE;
}
}
/* Continue and mux this GOP */
return FALSE;
}
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
/* Called with splitmux lock held */
/* Called when entering ProcessingCompleteGop state
* Assess if mq contents overflowed the current file
* -> If yes, need to switch to new file
* -> if no, set max_out_running_time to let this GOP in and
* go to COLLECTING_GOP_START state
*/
static void
handle_gathered_gop (GstSplitMuxSink * splitmux)
{
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
guint64 queued_bytes;
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
GstClockTimeDiff queued_time = 0;
splitmuxsink: Use muxer reserved space properties if present. If the use-robust-muxing property is set, check if the assigned muxer has reserved-max-duration and reserved-duration-remaining properties, and if so set the configured maximum duration to the reserved-max-duration property, and monitor the remaining space to start a new file if the reserved header space is about to run out - even though it never ought to.
2015-04-07 13:53:19 +00:00
GstClockTimeDiff queued_gop_time = 0;
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
GstClockTimeDiff new_out_ts = splitmux->reference_ctx->in_running_time;
SplitMuxOutputCommand *cmd;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
/* Assess if the multiqueue contents overflowed the current file */
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
/* When considering if a newly gathered GOP overflows
* the time limit for the file, only consider the running time of the
* reference stream. Other streams might have run ahead a little bit,
* but extra pieces won't be released to the muxer beyond the reference
* stream cut-off anyway - so it forms the limit. */
queued_bytes = splitmux->fragment_total_bytes + splitmux->gop_total_bytes;
queued_time = splitmux->reference_ctx->in_running_time;
splitmuxsink: Use muxer reserved space properties if present. If the use-robust-muxing property is set, check if the assigned muxer has reserved-max-duration and reserved-duration-remaining properties, and if so set the configured maximum duration to the reserved-max-duration property, and monitor the remaining space to start a new file if the reserved header space is about to run out - even though it never ought to.
2015-04-07 13:53:19 +00:00
/* queued_gop_time tracks how much unwritten data there is waiting to
* be written to this fragment including this GOP */
if (splitmux->reference_ctx->out_running_time != GST_CLOCK_STIME_NONE)
queued_gop_time =
splitmux->reference_ctx->in_running_time -
splitmux->reference_ctx->out_running_time;
else
queued_gop_time =
splitmux->reference_ctx->in_running_time - splitmux->gop_start_time;
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
GST_LOG_OBJECT (splitmux, " queued_bytes %" G_GUINT64_FORMAT, queued_bytes);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmuxsink: Use muxer reserved space properties if present. If the use-robust-muxing property is set, check if the assigned muxer has reserved-max-duration and reserved-duration-remaining properties, and if so set the configured maximum duration to the reserved-max-duration property, and monitor the remaining space to start a new file if the reserved header space is about to run out - even though it never ought to.
2015-04-07 13:53:19 +00:00
g_assert (queued_gop_time >= 0);
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
g_assert (queued_time >= splitmux->fragment_start_time);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
queued_time -= splitmux->fragment_start_time;
splitmuxsink: Use muxer reserved space properties if present. If the use-robust-muxing property is set, check if the assigned muxer has reserved-max-duration and reserved-duration-remaining properties, and if so set the configured maximum duration to the reserved-max-duration property, and monitor the remaining space to start a new file if the reserved header space is about to run out - even though it never ought to.
2015-04-07 13:53:19 +00:00
if (queued_time < queued_gop_time)
queued_gop_time = queued_time;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
/* Expand queued bytes estimate by muxer overhead */
queued_bytes += (queued_bytes * splitmux->mux_overhead);
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
GST_LOG_OBJECT (splitmux, "mq at TS %" GST_STIME_FORMAT
Fixed splitmuxsink 32-bit overflow bug Extend the byte tracking counters to 64-bit on all platforms, instead of using gsize, which overflows after 4GB. https://bugzilla.gnome.org/show_bug.cgi?id=770019
2016-08-20 08:59:30 +00:00
" bytes %" G_GUINT64_FORMAT, GST_STIME_ARGS (queued_time), queued_bytes);
splitmuxsink: Add option for timecode-based split If this option is given, it will calculate the next split point based on timecode difference. https://bugzilla.gnome.org/show_bug.cgi?id=774209
2016-12-22 15:40:40 +00:00
if (splitmux->next_max_tc_time != GST_CLOCK_TIME_NONE) {
GST_LOG_OBJECT (splitmux,
"timecode mq TS %" GST_TIME_FORMAT " vs target %" GST_TIME_FORMAT,
GST_TIME_ARGS (splitmux->reference_ctx->in_running_time),
GST_TIME_ARGS (splitmux->next_max_tc_time + 5 * GST_USECOND));
}
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
/* Check for overrun - have we output at least one byte and overrun
* either threshold? */
splitmuxsink: Use muxer reserved space properties if present. If the use-robust-muxing property is set, check if the assigned muxer has reserved-max-duration and reserved-duration-remaining properties, and if so set the configured maximum duration to the reserved-max-duration property, and monitor the remaining space to start a new file if the reserved header space is about to run out - even though it never ought to.
2015-04-07 13:53:19 +00:00
if (need_new_fragment (splitmux, queued_time, queued_gop_time, queued_bytes)) {
splitmuxsink: added a "split now" action signal Now, the video file can be split at an arbitrary time chosen by the user. https://bugzilla.gnome.org/show_bug.cgi?id=787922
2017-09-21 15:23:54 +00:00
g_atomic_int_set (&(splitmux->split_now), FALSE);
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
/* Tell the output side to start a new fragment */
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
GST_INFO_OBJECT (splitmux,
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
"This GOP (dur %" GST_STIME_FORMAT
") would overflow the fragment, Sending start_new_fragment cmd",
GST_STIME_ARGS (splitmux->reference_ctx->in_running_time -
splitmux->gop_start_time));
cmd = out_cmd_buf_new ();
cmd->start_new_fragment = TRUE;
g_queue_push_head (&splitmux->out_cmd_q, cmd);
GST_SPLITMUX_BROADCAST_OUTPUT (splitmux);
new_out_ts = splitmux->reference_ctx->in_running_time;
splitmux->fragment_start_time = splitmux->gop_start_time;
splitmux->fragment_total_bytes = 0;
splitmuxsink: Add option for timecode-based split If this option is given, it will calculate the next split point based on timecode difference. https://bugzilla.gnome.org/show_bug.cgi?id=774209
2016-12-22 15:40:40 +00:00
if (request_next_keyframe (splitmux,
splitmux->reference_ctx->prev_in_keyframe) == FALSE) {
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
GST_WARNING_OBJECT (splitmux,
"Could not request a keyframe. Files may not split at the exact location they should");
}
splitmuxsink: Add option for timecode-based split If this option is given, it will calculate the next split point based on timecode difference. https://bugzilla.gnome.org/show_bug.cgi?id=774209
2016-12-22 15:40:40 +00:00
gst_buffer_replace (&splitmux->reference_ctx->prev_in_keyframe, NULL);
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
}
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
/* And set up to collect the next GOP */
if (!splitmux->reference_ctx->in_eos) {
splitmux->input_state = SPLITMUX_INPUT_STATE_COLLECTING_GOP_START;
splitmux->gop_start_time = new_out_ts;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
} else {
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
/* This is probably already the current state, but just in case: */
splitmux->input_state = SPLITMUX_INPUT_STATE_FINISHING_UP;
new_out_ts = GST_CLOCK_STIME_NONE; /* EOS runs until forever */
}
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
/* And wake all input contexts to send a wake-up event */
g_list_foreach (splitmux->contexts, (GFunc) ctx_set_unblock, NULL);
GST_SPLITMUX_BROADCAST_INPUT (splitmux);
splitmuxsink: Take released-but-not-yet-output bytes into account When deciding whether it's time to switch to a new file, take into account data that's been released for pushing, but hasn't yet been pushed - because downstream is slow or the threads haven't been scheduled. Fixes a race in the unit test and probably in practice - sometimes failing to switch when it should for an extra GOP or two. Also fix a problem in splitmuxsrc where playback sometimes stalls at startup if types are found too quickly. https://bugzilla.gnome.org/show_bug.cgi?id=750747
2015-06-11 03:36:54 +00:00
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
/* Now either way - either there was no overflow, or we requested a new fragment: release this GOP */
splitmux->fragment_total_bytes += splitmux->gop_total_bytes;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
if (splitmux->gop_total_bytes > 0) {
GST_LOG_OBJECT (splitmux,
"Releasing GOP to output. Bytes in fragment now %" G_GUINT64_FORMAT
" time %" GST_STIME_FORMAT,
splitmux->fragment_total_bytes, GST_STIME_ARGS (queued_time));
/* Send this GOP to the output command queue */
cmd = out_cmd_buf_new ();
cmd->start_new_fragment = FALSE;
cmd->max_output_ts = new_out_ts;
GST_LOG_OBJECT (splitmux, "Sending GOP cmd to output for TS %"
GST_STIME_FORMAT, GST_STIME_ARGS (new_out_ts));
g_queue_push_head (&splitmux->out_cmd_q, cmd);
GST_SPLITMUX_BROADCAST_OUTPUT (splitmux);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
}
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
splitmux->gop_total_bytes = 0;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
}
/* Called with splitmux lock held */
/* Called from each input pad when it is has all the pieces
splitmuxsink: allow non-video streams to serve as reference In the absence of a video stream, the first stream will be used as reference. https://bugzilla.gnome.org/show_bug.cgi?id=753617
2015-04-29 17:23:28 +00:00
* for a GOP or EOS, starting with the reference pad which has set the
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
* splitmux->max_in_running_time
*/
static void
check_completed_gop (GstSplitMuxSink * splitmux, MqStreamCtx * ctx)
{
GList *cur;
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
GstEvent *event;
/* On ENDING_FILE, the reference stream sends a command to start a new
* fragment, then releases the GOP for output in the new fragment.
* If somes streams received no buffer during the last GOP that overran,
* because its next buffer has a timestamp bigger than
* ctx->max_in_running_time, its queue is empty. In that case the only
* way to wakeup the output thread is by injecting an event in the
* queue. This usually happen with subtitle streams.
* See https://bugzilla.gnome.org/show_bug.cgi?id=763711. */
if (ctx->need_unblock) {
GST_LOG_OBJECT (ctx->sinkpad, "Sending splitmuxsink-unblock event");
event = gst_event_new_custom (GST_EVENT_CUSTOM_DOWNSTREAM |
GST_EVENT_TYPE_SERIALIZED,
gst_structure_new ("splitmuxsink-unblock", "timestamp",
G_TYPE_INT64, splitmux->max_in_running_time, NULL));
GST_SPLITMUX_UNLOCK (splitmux);
gst_pad_send_event (ctx->sinkpad, event);
GST_SPLITMUX_LOCK (splitmux);
ctx->need_unblock = FALSE;
GST_SPLITMUX_BROADCAST_INPUT (splitmux);
/* state may have changed while we were unlocked. Loop again if so */
if (splitmux->input_state != SPLITMUX_INPUT_STATE_WAITING_GOP_COLLECT)
return;
}
if (splitmux->input_state == SPLITMUX_INPUT_STATE_WAITING_GOP_COLLECT) {
gboolean ready = TRUE;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
/* Iterate each pad, and check that the input running time is at least
splitmuxsink: allow non-video streams to serve as reference In the absence of a video stream, the first stream will be used as reference. https://bugzilla.gnome.org/show_bug.cgi?id=753617
2015-04-29 17:23:28 +00:00
* up to the reference running time, and if so handle the collected GOP */
splitmux: Handle a hang draining out at EOS Make sure that all data is drained out when the reference pad goes EOS. Fixes a problem where data that arrives on other pads after the reference pad finishes can stall forever and never pass EOS. https://bugzilla.gnome.org/show_bug.cgi?id=763711
2016-03-30 15:15:04 +00:00
GST_LOG_OBJECT (splitmux, "Checking GOP collected, Max in running time %"
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
GST_STIME_FORMAT " ctx %p",
GST_STIME_ARGS (splitmux->max_in_running_time), ctx);
splitmux: Handle a hang draining out at EOS Make sure that all data is drained out when the reference pad goes EOS. Fixes a problem where data that arrives on other pads after the reference pad finishes can stall forever and never pass EOS. https://bugzilla.gnome.org/show_bug.cgi?id=763711
2016-03-30 15:15:04 +00:00
for (cur = g_list_first (splitmux->contexts); cur != NULL;
cur = g_list_next (cur)) {
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
MqStreamCtx *tmpctx = (MqStreamCtx *) (cur->data);
GST_LOG_OBJECT (splitmux,
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
"Context %p (src pad %" GST_PTR_FORMAT ") TS %" GST_STIME_FORMAT
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
" EOS %d", tmpctx, tmpctx->srcpad,
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
GST_STIME_ARGS (tmpctx->in_running_time), tmpctx->in_eos);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
if (splitmux->max_in_running_time != GST_CLOCK_STIME_NONE &&
splitmux: Handle a hang draining out at EOS Make sure that all data is drained out when the reference pad goes EOS. Fixes a problem where data that arrives on other pads after the reference pad finishes can stall forever and never pass EOS. https://bugzilla.gnome.org/show_bug.cgi?id=763711
2016-03-30 15:15:04 +00:00
tmpctx->in_running_time < splitmux->max_in_running_time &&
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
!tmpctx->in_eos) {
GST_LOG_OBJECT (splitmux,
"Context %p (src pad %" GST_PTR_FORMAT ") not ready. We'll sleep",
tmpctx, tmpctx->srcpad);
ready = FALSE;
break;
}
}
if (ready) {
GST_DEBUG_OBJECT (splitmux,
"Collected GOP is complete. Processing (ctx %p)", ctx);
/* All pads have a complete GOP, release it into the multiqueue */
handle_gathered_gop (splitmux);
}
}
splitmuxsink: Fix deadlock case when source reaches EOS https://bugzilla.gnome.org/show_bug.cgi?id=765072
2016-05-04 15:15:20 +00:00
/* If upstream reached EOS we are not expecting more data, no need to wait
* here. */
if (ctx->in_eos)
return;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
/* Some pad is not yet ready, or GOP is being pushed
* either way, sleep and wait to get woken */
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
while (splitmux->input_state == SPLITMUX_INPUT_STATE_WAITING_GOP_COLLECT &&
splitmuxsink: prevent deadlock when states change too fast If the GOP is completed, pads have to start gathering for the next one but it is possible that the the state might go to COLLECTING_GOP_START and back to WAITING_GOP_COMPLETE before the thread has a chance to wake up and proceed, leaving it trapped in the check_completed_gop loop and deadlocking the other threads waiting for it to advance. To solve it, this patch also checks that tha input running time hasn't changed to prevent this scenario.
2015-08-03 16:42:20 +00:00
!ctx->flushing &&
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
(ctx->in_running_time >= splitmux->max_in_running_time) &&
(splitmux->max_in_running_time != GST_CLOCK_STIME_NONE)) {
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
GST_LOG_OBJECT (splitmux, "Sleeping for GOP collection (ctx %p)", ctx);
GST_SPLITMUX_WAIT_INPUT (splitmux);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
GST_LOG_OBJECT (splitmux, "Done waiting for complete GOP (ctx %p)", ctx);
}
}
static GstPadProbeReturn
handle_mq_input (GstPad * pad, GstPadProbeInfo * info, MqStreamCtx * ctx)
{
GstSplitMuxSink *splitmux = ctx->splitmux;
GstBuffer *buf;
splitmux: fix memory leak If execution goes to the beach in line 981, buf_info goes out of scope without the memory being free'd. Handle this case. CID #1268403
2015-02-10 13:29:32 +00:00
MqStreamBuf *buf_info = NULL;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
GstClockTime ts;
gboolean loop_again;
gboolean keyframe = FALSE;
splitmuxsink: remove extra \n at debug message
2015-08-03 16:45:59 +00:00
GST_LOG_OBJECT (pad, "Fired probe type 0x%x", info->type);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
/* FIXME: Handle buffer lists, until then make it clear they won't work */
if (info->type & GST_PAD_PROBE_TYPE_BUFFER_LIST) {
g_warning ("Buffer list handling not implemented");
return GST_PAD_PROBE_DROP;
}
splitmuxsink: Correctly catch FLUSH events in probes https://bugzilla.gnome.org/show_bug.cgi?id=767498
2017-04-20 10:17:35 +00:00
if (info->type & GST_PAD_PROBE_TYPE_EVENT_DOWNSTREAM ||
info->type & GST_PAD_PROBE_TYPE_EVENT_FLUSH) {
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
GstEvent *event = gst_pad_probe_info_get_event (info);
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
GST_LOG_OBJECT (pad, "Event %" GST_PTR_FORMAT, event);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
switch (GST_EVENT_TYPE (event)) {
case GST_EVENT_SEGMENT:
gst_event_copy_segment (event, &ctx->in_segment);
break;
case GST_EVENT_FLUSH_STOP:
GST_SPLITMUX_LOCK (splitmux);
gst_segment_init (&ctx->in_segment, GST_FORMAT_UNDEFINED);
ctx->in_eos = FALSE;
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
ctx->in_running_time = GST_CLOCK_STIME_NONE;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
GST_SPLITMUX_UNLOCK (splitmux);
break;
case GST_EVENT_EOS:
GST_SPLITMUX_LOCK (splitmux);
ctx->in_eos = TRUE;
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
if (splitmux->input_state == SPLITMUX_INPUT_STATE_STOPPED)
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
goto beach;
splitmuxsink: allow non-video streams to serve as reference In the absence of a video stream, the first stream will be used as reference. https://bugzilla.gnome.org/show_bug.cgi?id=753617
2015-04-29 17:23:28 +00:00
if (ctx->is_reference) {
GST_INFO_OBJECT (splitmux, "Got Reference EOS. Finishing up");
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
/* check_completed_gop will act as if this is a new keyframe with infinite timestamp */
splitmux->input_state = SPLITMUX_INPUT_STATE_WAITING_GOP_COLLECT;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
/* Wake up other input pads to collect this GOP */
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
GST_SPLITMUX_BROADCAST_INPUT (splitmux);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
check_completed_gop (splitmux, ctx);
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
} else if (splitmux->input_state ==
SPLITMUX_INPUT_STATE_WAITING_GOP_COLLECT) {
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
/* If we are waiting for a GOP to be completed (ie, for aux
* pads to catch up), then this pad is complete, so check
* if the whole GOP is.
*/
check_completed_gop (splitmux, ctx);
}
GST_SPLITMUX_UNLOCK (splitmux);
break;
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
case GST_EVENT_GAP:{
GstClockTime gap_ts;
GstClockTimeDiff rtime;
gst_event_parse_gap (event, &gap_ts, NULL);
if (gap_ts == GST_CLOCK_TIME_NONE)
break;
GST_SPLITMUX_LOCK (splitmux);
if (splitmux->input_state == SPLITMUX_INPUT_STATE_STOPPED)
goto beach;
rtime = my_segment_to_running_time (&ctx->in_segment, gap_ts);
GST_LOG_OBJECT (pad, "Have GAP w/ ts %" GST_STIME_FORMAT,
GST_STIME_ARGS (rtime));
if (ctx->is_reference
&& splitmux->fragment_start_time == GST_CLOCK_STIME_NONE) {
splitmux->gop_start_time = splitmux->fragment_start_time = rtime;
GST_LOG_OBJECT (splitmux, "Mux start time now %" GST_STIME_FORMAT,
GST_STIME_ARGS (splitmux->fragment_start_time));
/* Also take this as the first start time when starting up,
* so that we start counting overflow from the first frame */
if (!GST_CLOCK_STIME_IS_VALID (splitmux->max_in_running_time))
splitmux->max_in_running_time = splitmux->fragment_start_time;
}
GST_SPLITMUX_UNLOCK (splitmux);
break;
}
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
default:
break;
}
return GST_PAD_PROBE_PASS;
splitmux: Drop allocation queries They can cause us to deadlock, while we're waiting for a new frame and upstream is waiting for the allocation query to be answered before sending a frame https://bugzilla.gnome.org/show_bug.cgi?id=783753
2017-06-13 14:40:19 +00:00
} else if (info->type & GST_PAD_PROBE_TYPE_QUERY_DOWNSTREAM) {
switch (GST_QUERY_TYPE (GST_QUERY (info->data))) {
case GST_QUERY_ALLOCATION:
return GST_PAD_PROBE_DROP;
default:
return GST_PAD_PROBE_PASS;
}
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
}
buf = gst_pad_probe_info_get_buffer (info);
buf_info = mq_stream_buf_new ();
if (GST_BUFFER_PTS_IS_VALID (buf))
ts = GST_BUFFER_PTS (buf);
else
ts = GST_BUFFER_DTS (buf);
splitmuxsink: Fix debug statement signedness. The ts variable is a GstClockTime, don't print it as a GstClockTimeDiff.
2016-07-25 08:20:03 +00:00
GST_LOG_OBJECT (pad, "Buffer TS is %" GST_TIME_FORMAT, GST_TIME_ARGS (ts));
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
GST_SPLITMUX_LOCK (splitmux);
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
if (splitmux->input_state == SPLITMUX_INPUT_STATE_STOPPED)
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
goto beach;
/* If this buffer has a timestamp, advance the input timestamp of the
* stream */
if (GST_CLOCK_TIME_IS_VALID (ts)) {
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
GstClockTimeDiff running_time =
splitmux: Fix typo converting to running time. Use the correct collected timestamp.
2016-08-08 03:49:19 +00:00
my_segment_to_running_time (&ctx->in_segment, ts);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
GST_LOG_OBJECT (pad, "Buffer running TS is %" GST_STIME_FORMAT,
GST_STIME_ARGS (running_time));
if (GST_CLOCK_STIME_IS_VALID (running_time)
&& running_time > ctx->in_running_time)
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
ctx->in_running_time = running_time;
}
/* Try to make sure we have a valid running time */
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
if (!GST_CLOCK_STIME_IS_VALID (ctx->in_running_time)) {
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
ctx->in_running_time =
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
my_segment_to_running_time (&ctx->in_segment, ctx->in_segment.start);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
}
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
GST_LOG_OBJECT (pad, "in running time now %" GST_STIME_FORMAT,
GST_STIME_ARGS (ctx->in_running_time));
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
buf_info->run_ts = ctx->in_running_time;
buf_info->buf_size = gst_buffer_get_size (buf);
splitmuxsink: Add option to split at exactly max-size-time Will try to request a keyframe from the encoder to be sent at the target running time. https://bugzilla.gnome.org/show_bug.cgi?id=769664
2016-08-09 09:55:59 +00:00
buf_info->duration = GST_BUFFER_DURATION (buf);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
/* initialize fragment_start_time */
if (ctx->is_reference
&& splitmux->fragment_start_time == GST_CLOCK_STIME_NONE) {
splitmux->gop_start_time = splitmux->fragment_start_time = buf_info->run_ts;
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
GST_LOG_OBJECT (splitmux, "Mux start time now %" GST_STIME_FORMAT,
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
GST_STIME_ARGS (splitmux->fragment_start_time));
splitmuxsink: Add option for timecode-based split If this option is given, it will calculate the next split point based on timecode difference. https://bugzilla.gnome.org/show_bug.cgi?id=774209
2016-12-22 15:40:40 +00:00
gst_buffer_replace (&ctx->prev_in_keyframe, buf);
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
/* Also take this as the first start time when starting up,
* so that we start counting overflow from the first frame */
if (!GST_CLOCK_STIME_IS_VALID (splitmux->max_in_running_time))
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
splitmux->max_in_running_time = splitmux->fragment_start_time;
splitmuxsink: Add option for timecode-based split If this option is given, it will calculate the next split point based on timecode difference. https://bugzilla.gnome.org/show_bug.cgi?id=774209
2016-12-22 15:40:40 +00:00
if (request_next_keyframe (splitmux, ctx->prev_in_keyframe) == FALSE) {
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
GST_WARNING_OBJECT (splitmux,
"Could not request a keyframe. Files may not split at the exact location they should");
}
splitmuxsink: Add option for timecode-based split If this option is given, it will calculate the next split point based on timecode difference. https://bugzilla.gnome.org/show_bug.cgi?id=774209
2016-12-22 15:40:40 +00:00
gst_buffer_replace (&splitmux->reference_ctx->prev_in_keyframe, NULL);
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
}
splitmuxsink: initialize mux_start_time properly mux_start_time refers to the running_time of the buffer that goes first in the output file. Normally this time is 0, so this variable is initialized to 0 during the state change to PAUSED. However, when dealing with dynamic pipelines and starting a recording while the pipeline has already run for a while, the running_time of the first buffer is > 0 and this causes a problem with detecting the end of the first file(s) when splitting by duration, because the code will later compare the threshold_time with (last buffer running_time - mux_start_time) and will get it wrong until mux_start_time advances enough to make this difference < threshold_time, creating empty files in the meantime. https://bugzilla.gnome.org/show_bug.cgi?id=753624
2015-07-22 15:45:12 +00:00
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
GST_DEBUG_OBJECT (pad, "Buf TS %" GST_STIME_FORMAT
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
" total GOP bytes %" G_GUINT64_FORMAT,
GST_STIME_ARGS (buf_info->run_ts), splitmux->gop_total_bytes);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
loop_again = TRUE;
do {
if (ctx->flushing)
break;
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
switch (splitmux->input_state) {
case SPLITMUX_INPUT_STATE_COLLECTING_GOP_START:
splitmuxsink: allow non-video streams to serve as reference In the absence of a video stream, the first stream will be used as reference. https://bugzilla.gnome.org/show_bug.cgi?id=753617
2015-04-29 17:23:28 +00:00
if (ctx->is_reference) {
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
/* If a keyframe, we have a complete GOP */
if (GST_BUFFER_FLAG_IS_SET (buf, GST_BUFFER_FLAG_DELTA_UNIT) ||
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
!GST_CLOCK_STIME_IS_VALID (ctx->in_running_time) ||
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmux->max_in_running_time >= ctx->in_running_time) {
/* Pass this buffer through */
loop_again = FALSE;
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
/* Allow other input pads to catch up to here too */
splitmux->max_in_running_time = ctx->in_running_time;
GST_SPLITMUX_BROADCAST_INPUT (splitmux);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
break;
}
GST_INFO_OBJECT (pad,
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
"Have keyframe with running time %" GST_STIME_FORMAT,
GST_STIME_ARGS (ctx->in_running_time));
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
keyframe = TRUE;
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
splitmux->input_state = SPLITMUX_INPUT_STATE_WAITING_GOP_COLLECT;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmux->max_in_running_time = ctx->in_running_time;
/* Wake up other input pads to collect this GOP */
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
GST_SPLITMUX_BROADCAST_INPUT (splitmux);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
check_completed_gop (splitmux, ctx);
splitmuxsink: Add option for timecode-based split If this option is given, it will calculate the next split point based on timecode difference. https://bugzilla.gnome.org/show_bug.cgi?id=774209
2016-12-22 15:40:40 +00:00
/* Store this new keyframe to remember the start of GOP */
gst_buffer_replace (&ctx->prev_in_keyframe, buf);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
} else {
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
/* Pass this buffer if the reference ctx is far enough ahead */
if (ctx->in_running_time < splitmux->max_in_running_time) {
loop_again = FALSE;
break;
}
splitmuxsink: allow non-video streams to serve as reference In the absence of a video stream, the first stream will be used as reference. https://bugzilla.gnome.org/show_bug.cgi?id=753617
2015-04-29 17:23:28 +00:00
/* We're still waiting for a keyframe on the reference pad, sleep */
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
GST_LOG_OBJECT (pad, "Sleeping for GOP start");
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
GST_SPLITMUX_WAIT_INPUT (splitmux);
GST_LOG_OBJECT (pad,
"Done sleeping for GOP start input state now %d",
splitmux->input_state);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
}
break;
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
case SPLITMUX_INPUT_STATE_WAITING_GOP_COLLECT:{
/* We're collecting a GOP. If this is the reference context,
* we need to check if this is a keyframe that marks the start
* of the next GOP. If it is, it marks the end of the GOP we're
* collecting, so sleep and wait until all the other pads also
* reach that timestamp - at which point, we have an entire GOP
* and either go to ENDING_FILE or release this GOP to the muxer and
* go back to COLLECT_GOP_START. */
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
/* If we overran the target timestamp, it might be time to process
* the GOP, otherwise bail out for more data
*/
GST_LOG_OBJECT (pad,
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
"Checking TS %" GST_STIME_FORMAT " against max %"
GST_STIME_FORMAT, GST_STIME_ARGS (ctx->in_running_time),
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
GST_STIME_ARGS (splitmux->max_in_running_time));
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
if (ctx->in_running_time < splitmux->max_in_running_time) {
loop_again = FALSE;
break;
}
GST_LOG_OBJECT (pad,
"Collected last packet of GOP. Checking other pads");
check_completed_gop (splitmux, ctx);
break;
splitmuxsink: Fix occasional deadlock when ending file with subtitle Deadlock occurs when splitting files if one stream received no buffer during the first GOP of the next file. That can happen in that scenario for example: 1) The first GOP of video is collected, it has a duration of 10s. max_in_running_time is set to 10s. 2) Other streams catchup and we receive the first subtitle buffer at ts=0 and has a duration of 1min. 3) We receive the 2nd subtitle buffer with a ts=1min. in_running_time is set to 1min. That buffer is blocked in handle_mq_input() because max_in_running_time is still 10s. 4) Since all in_running_time are now > 10s, max_out_running_time is now set to 10s. That first GOP gets recorded into the file. The muxer pop buffers out of the mq, when it tries to pop a 2nd subtitle buffer it blocks because the GstDataQueue is empty. 5) A 2nd GOP of video is collected and has a duration of 10s as well. max_in_running_time is now 20s. Since subtitle's in_running_time is already 1min, that GOP is already complete. 6) But let's say we overran the max file size, we thus set state to SPLITMUX_STATE_ENDING_FILE now. As soon as a buffer with ts > 10s (end of previous GOP) arrives in handle_mq_output(), EOS event is sent downstream instead. But since the subtitle queue is empty, that's never going to happen. Pipeline is now deadlocked. To fix this situation we have to: - Send a dummy event through the queue to wakeup output thread. - Update out_running_time to at least max_out_running_time so it sends EOS. - Respect time order, so we set out_running_tim=max_in_running_time because that's bigger than previous buffer and smaller than next. https://bugzilla.gnome.org/show_bug.cgi?id=763711
2016-03-18 19:45:01 +00:00
}
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
case SPLITMUX_INPUT_STATE_FINISHING_UP:
loop_again = FALSE;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
break;
default:
loop_again = FALSE;
break;
}
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
}
while (loop_again);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
if (keyframe) {
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
splitmux->queued_keyframes++;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
buf_info->keyframe = TRUE;
}
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
/* Update total input byte counter for overflow detect */
splitmux->gop_total_bytes += buf_info->buf_size;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
/* Now add this buffer to the queue just before returning */
g_queue_push_head (&ctx->queued_bufs, buf_info);
GST_LOG_OBJECT (pad, "Returning to queue buffer %" GST_PTR_FORMAT
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
" run ts %" GST_STIME_FORMAT, buf, GST_STIME_ARGS (ctx->in_running_time));
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
GST_SPLITMUX_UNLOCK (splitmux);
splitmux: fix memory leak If execution goes to the beach in line 981, buf_info goes out of scope without the memory being free'd. Handle this case. CID #1268403
2015-02-10 13:29:32 +00:00
return GST_PAD_PROBE_PASS;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmux: fix memory leak If execution goes to the beach in line 981, buf_info goes out of scope without the memory being free'd. Handle this case. CID #1268403
2015-02-10 13:29:32 +00:00
beach:
GST_SPLITMUX_UNLOCK (splitmux);
if (buf_info)
mq_stream_buf_free (buf_info);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
return GST_PAD_PROBE_PASS;
}
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
static void
grow_blocked_queues (GstSplitMuxSink * splitmux)
{
GList *cur;
/* Scan other queues for full-ness and grow them */
for (cur = g_list_first (splitmux->contexts);
cur != NULL; cur = g_list_next (cur)) {
MqStreamCtx *tmpctx = (MqStreamCtx *) (cur->data);
guint cur_limit;
guint cur_len = g_queue_get_length (&tmpctx->queued_bufs);
g_object_get (tmpctx->q, "max-size-buffers", &cur_limit, NULL);
GST_LOG_OBJECT (tmpctx->q, "Queue len %u", cur_len);
if (cur_len >= cur_limit) {
cur_limit = cur_len + 1;
GST_DEBUG_OBJECT (tmpctx->q,
"Queue overflowed and needs enlarging. Growing to %u buffers",
cur_limit);
g_object_set (tmpctx->q, "max-size-buffers", cur_limit, NULL);
}
}
}
static void
handle_q_underrun (GstElement * q, gpointer user_data)
{
MqStreamCtx *ctx = (MqStreamCtx *) (user_data);
GstSplitMuxSink *splitmux = ctx->splitmux;
GST_SPLITMUX_LOCK (splitmux);
GST_DEBUG_OBJECT (q,
"Queue reported underrun with %d keyframes and %d cmds enqueued",
splitmux->queued_keyframes, g_queue_get_length (&splitmux->out_cmd_q));
grow_blocked_queues (splitmux);
GST_SPLITMUX_UNLOCK (splitmux);
}
static void
handle_q_overrun (GstElement * q, gpointer user_data)
{
MqStreamCtx *ctx = (MqStreamCtx *) (user_data);
GstSplitMuxSink *splitmux = ctx->splitmux;
gboolean allow_grow = FALSE;
GST_SPLITMUX_LOCK (splitmux);
GST_DEBUG_OBJECT (q,
"Queue reported overrun with %d keyframes and %d cmds enqueued",
splitmux->queued_keyframes, g_queue_get_length (&splitmux->out_cmd_q));
if (splitmux->queued_keyframes < 2) {
/* Less than a full GOP queued, grow the queue */
allow_grow = TRUE;
} else if (g_queue_get_length (&splitmux->out_cmd_q) < 1) {
allow_grow = TRUE;
} else {
/* If another queue is starved, grow */
GList *cur;
for (cur = g_list_first (splitmux->contexts);
cur != NULL; cur = g_list_next (cur)) {
MqStreamCtx *tmpctx = (MqStreamCtx *) (cur->data);
if (tmpctx != ctx && g_queue_get_length (&tmpctx->queued_bufs) < 1) {
allow_grow = TRUE;
}
}
}
GST_SPLITMUX_UNLOCK (splitmux);
if (allow_grow) {
guint cur_limit;
g_object_get (q, "max-size-buffers", &cur_limit, NULL);
cur_limit++;
GST_DEBUG_OBJECT (q,
"Queue overflowed and needs enlarging. Growing to %u buffers",
cur_limit);
g_object_set (q, "max-size-buffers", cur_limit, NULL);
}
}
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
static GstPad *
gst_splitmux_sink_request_new_pad (GstElement * element,
GstPadTemplate * templ, const gchar * name, const GstCaps * caps)
{
GstSplitMuxSink *splitmux = (GstSplitMuxSink *) element;
GstPadTemplate *mux_template = NULL;
GstPad *res = NULL;
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
GstElement *q;
GstPad *q_sink = NULL, *q_src = NULL;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
gchar *gname;
gboolean is_video = FALSE;
MqStreamCtx *ctx;
GST_DEBUG_OBJECT (element, "templ:%s, name:%s", templ->name_template, name);
GST_SPLITMUX_LOCK (splitmux);
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
if (!create_muxer (splitmux))
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
goto fail;
if (templ->name_template) {
if (g_str_equal (templ->name_template, "video")) {
splitmuxsink: Only allow one video request pad The pacing of the overall muxing is controlled by the video GOPs arriving, so we can only handle 1 video stream, and the request pad is named accordingly. Ignore a request for a 2nd video pad if there's already an active one.
2016-10-26 03:32:48 +00:00
if (splitmux->have_video)
goto already_have_video;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
/* FIXME: Look for a pad template with matching caps, rather than by name */
mux_template =
gst_element_class_get_pad_template (GST_ELEMENT_GET_CLASS
(splitmux->muxer), "video_%u");
splitmuxsink: pad request fails for flvmux splitmuxsink requests pad from element using pad template like "video_%u", "audio_%u" and "sink_%d". This is true for most of the muxers. But splitmuxsink not able to request pad to flvmux as flvmux has "audio" and "video" as pad templates. fix: splitmuxsink should fallback to "audio" and "video" when template not found. https://bugzilla.gnome.org/show_bug.cgi?id=774507
2016-11-16 05:23:51 +00:00
/* Fallback to find sink pad templates named 'video' (flvmux) */
if (!mux_template) {
mux_template =
gst_element_class_get_pad_template (GST_ELEMENT_GET_CLASS
(splitmux->muxer), "video");
}
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
is_video = TRUE;
name = NULL;
} else {
mux_template =
gst_element_class_get_pad_template (GST_ELEMENT_GET_CLASS
(splitmux->muxer), templ->name_template);
splitmuxsink: pad request fails for flvmux splitmuxsink requests pad from element using pad template like "video_%u", "audio_%u" and "sink_%d". This is true for most of the muxers. But splitmuxsink not able to request pad to flvmux as flvmux has "audio" and "video" as pad templates. fix: splitmuxsink should fallback to "audio" and "video" when template not found. https://bugzilla.gnome.org/show_bug.cgi?id=774507
2016-11-16 05:23:51 +00:00
/* Fallback to find sink pad templates named 'audio' (flvmux) */
if (!mux_template) {
mux_template =
gst_element_class_get_pad_template (GST_ELEMENT_GET_CLASS
(splitmux->muxer), "audio");
splitmuxsink: Don't use an explicit name for requesting audio pads ... unless the muxer uses the same audio pad template name as splitmuxsink. We can't request a pad called "audio_0" on a muxer that wants pads to be "sink_%d".
2017-04-20 12:16:24 +00:00
name = NULL;
splitmuxsink: pad request fails for flvmux splitmuxsink requests pad from element using pad template like "video_%u", "audio_%u" and "sink_%d". This is true for most of the muxers. But splitmuxsink not able to request pad to flvmux as flvmux has "audio" and "video" as pad templates. fix: splitmuxsink should fallback to "audio" and "video" when template not found. https://bugzilla.gnome.org/show_bug.cgi?id=774507
2016-11-16 05:23:51 +00:00
}
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
}
splitmuxsink: Support mpegtsmux as a muxer. As a fallback, look for a pad template sink_%d on the muxer when requesting pads, to support mpegtsmux https://bugzilla.gnome.org/show_bug.cgi?id=752999
2015-07-29 09:28:33 +00:00
if (mux_template == NULL) {
/* Fallback to find sink pad templates named 'sink_%d' (mpegtsmux) */
mux_template =
gst_element_class_get_pad_template (GST_ELEMENT_GET_CLASS
(splitmux->muxer), "sink_%d");
splitmuxsink: Don't use an explicit name for requesting audio pads ... unless the muxer uses the same audio pad template name as splitmuxsink. We can't request a pad called "audio_0" on a muxer that wants pads to be "sink_%d".
2017-04-20 12:16:24 +00:00
name = NULL;
splitmuxsink: Support mpegtsmux as a muxer. As a fallback, look for a pad template sink_%d on the muxer when requesting pads, to support mpegtsmux https://bugzilla.gnome.org/show_bug.cgi?id=752999
2015-07-29 09:28:33 +00:00
}
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
}
res = gst_element_request_pad (splitmux->muxer, mux_template, name, caps);
if (res == NULL)
goto fail;
if (is_video)
gname = g_strdup ("video");
else if (name == NULL)
gname = gst_pad_get_name (res);
else
gname = g_strdup (name);
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
if ((q = create_element (splitmux, "queue", NULL, FALSE)) == NULL)
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
goto fail;
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
gst_element_set_state (q, GST_STATE_TARGET (splitmux));
g_object_set (q, "max-size-bytes", 0, "max-size-time", (guint64) (0),
"max-size-buffers", 5, NULL);
q_sink = gst_element_get_static_pad (q, "sink");
q_src = gst_element_get_static_pad (q, "src");
if (gst_pad_link (q_src, res) != GST_PAD_LINK_OK) {
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
gst_element_release_request_pad (splitmux->muxer, res);
splitmux: Add unit test for file splitting Add a unit test for file splitting, and fix the leaks in the splitmuxsink it found
2015-02-06 14:41:49 +00:00
gst_object_unref (GST_OBJECT (res));
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
goto fail;
}
splitmux: Add unit test for file splitting Add a unit test for file splitting, and fix the leaks in the splitmuxsink it found
2015-02-06 14:41:49 +00:00
gst_object_unref (GST_OBJECT (res));
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
ctx = mq_stream_ctx_new (splitmux);
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
/* Context holds a ref: */
ctx->q = gst_object_ref (q);
ctx->srcpad = q_src;
ctx->sinkpad = q_sink;
ctx->q_overrun_id =
g_signal_connect (q, "overrun", (GCallback) handle_q_overrun, ctx);
g_signal_connect (q, "underrun", (GCallback) handle_q_underrun, ctx);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
mq_stream_ctx_ref (ctx);
ctx->src_pad_block_id =
splitmuxsink: Correctly catch FLUSH events in probes https://bugzilla.gnome.org/show_bug.cgi?id=767498
2017-04-20 10:17:35 +00:00
gst_pad_add_probe (q_src,
GST_PAD_PROBE_TYPE_DATA_DOWNSTREAM | GST_PAD_PROBE_TYPE_EVENT_FLUSH,
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
(GstPadProbeCallback) handle_mq_output, ctx, (GDestroyNotify)
_pad_block_destroy_src_notify);
splitmuxsink: allow non-video streams to serve as reference In the absence of a video stream, the first stream will be used as reference. https://bugzilla.gnome.org/show_bug.cgi?id=753617
2015-04-29 17:23:28 +00:00
if (is_video && splitmux->reference_ctx != NULL) {
splitmux->reference_ctx->is_reference = FALSE;
splitmux->reference_ctx = NULL;
}
if (splitmux->reference_ctx == NULL) {
splitmux->reference_ctx = ctx;
ctx->is_reference = TRUE;
}
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
res = gst_ghost_pad_new_from_template (gname, q_sink, templ);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
g_object_set_qdata ((GObject *) (res), PAD_CONTEXT, ctx);
mq_stream_ctx_ref (ctx);
ctx->sink_pad_block_id =
splitmuxsink: Correctly catch FLUSH events in probes https://bugzilla.gnome.org/show_bug.cgi?id=767498
2017-04-20 10:17:35 +00:00
gst_pad_add_probe (q_sink,
splitmux: Drop allocation queries They can cause us to deadlock, while we're waiting for a new frame and upstream is waiting for the allocation query to be answered before sending a frame https://bugzilla.gnome.org/show_bug.cgi?id=783753
2017-06-13 14:40:19 +00:00
GST_PAD_PROBE_TYPE_DATA_DOWNSTREAM | GST_PAD_PROBE_TYPE_EVENT_FLUSH |
GST_PAD_PROBE_TYPE_QUERY_DOWNSTREAM,
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
(GstPadProbeCallback) handle_mq_input, ctx, (GDestroyNotify)
_pad_block_destroy_sink_notify);
GST_DEBUG_OBJECT (splitmux, "Request pad %" GST_PTR_FORMAT
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
" feeds queue pad %" GST_PTR_FORMAT, res, q_sink);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmux->contexts = g_list_prepend (splitmux->contexts, ctx);
g_free (gname);
splitmuxsink: Only allow one video request pad The pacing of the overall muxing is controlled by the video GOPs arriving, so we can only handle 1 video stream, and the request pad is named accordingly. Ignore a request for a 2nd video pad if there's already an active one.
2016-10-26 03:32:48 +00:00
if (is_video)
splitmux->have_video = TRUE;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
gst_pad_set_active (res, TRUE);
gst_element_add_pad (element, res);
splitmuxsink: Only allow one video request pad The pacing of the overall muxing is controlled by the video GOPs arriving, so we can only handle 1 video stream, and the request pad is named accordingly. Ignore a request for a 2nd video pad if there's already an active one.
2016-10-26 03:32:48 +00:00
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
GST_SPLITMUX_UNLOCK (splitmux);
return res;
fail:
GST_SPLITMUX_UNLOCK (splitmux);
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
if (q_sink)
gst_object_unref (q_sink);
if (q_src)
gst_object_unref (q_src);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
return NULL;
splitmuxsink: Only allow one video request pad The pacing of the overall muxing is controlled by the video GOPs arriving, so we can only handle 1 video stream, and the request pad is named accordingly. Ignore a request for a 2nd video pad if there's already an active one.
2016-10-26 03:32:48 +00:00
already_have_video:
GST_DEBUG_OBJECT (splitmux, "video sink pad already requested");
GST_SPLITMUX_UNLOCK (splitmux);
return NULL;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
}
static void
gst_splitmux_sink_release_pad (GstElement * element, GstPad * pad)
{
GstSplitMuxSink *splitmux = (GstSplitMuxSink *) element;
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
GstPad *muxpad = NULL;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
MqStreamCtx *ctx =
(MqStreamCtx *) (g_object_get_qdata ((GObject *) (pad), PAD_CONTEXT));
GST_SPLITMUX_LOCK (splitmux);
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
if (splitmux->muxer == NULL)
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
goto fail; /* Elements don't exist yet - nothing to release */
GST_INFO_OBJECT (pad, "releasing request pad");
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
muxpad = gst_pad_get_peer (ctx->srcpad);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
/* Remove the context from our consideration */
splitmux->contexts = g_list_remove (splitmux->contexts, ctx);
if (ctx->sink_pad_block_id)
gst_pad_remove_probe (ctx->sinkpad, ctx->sink_pad_block_id);
if (ctx->src_pad_block_id)
gst_pad_remove_probe (ctx->srcpad, ctx->src_pad_block_id);
/* Can release the context now */
mq_stream_ctx_unref (ctx);
splitmuxsink: Take ownership of floating refs sink the floating ref when handed a muxer or sink to use so we clearly take ownership.
2016-10-26 00:59:32 +00:00
if (ctx == splitmux->reference_ctx)
splitmux->reference_ctx = NULL;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
/* Release and free the muxer input */
splitmuxsink: Fix GObject warnings on shutdown. Commit 83e718 added a pad template to splitmux request pads, which means that GstElement now releases the pads on dispose, but after having removed all elements in the bin and unlinked them. Make sure we can handle cleanup in that case without throwing assertions. https://bugzilla.gnome.org/show_bug.cgi?id=773784
2016-11-02 00:00:13 +00:00
if (muxpad) {
gst_element_release_request_pad (splitmux->muxer, muxpad);
gst_object_unref (muxpad);
}
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmuxsink: Only allow one video request pad The pacing of the overall muxing is controlled by the video GOPs arriving, so we can only handle 1 video stream, and the request pad is named accordingly. Ignore a request for a 2nd video pad if there's already an active one.
2016-10-26 03:32:48 +00:00
if (GST_PAD_PAD_TEMPLATE (pad) &&
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
g_str_equal (GST_PAD_TEMPLATE_NAME_TEMPLATE (GST_PAD_PAD_TEMPLATE
(pad)), "video"))
splitmuxsink: Only allow one video request pad The pacing of the overall muxing is controlled by the video GOPs arriving, so we can only handle 1 video stream, and the request pad is named accordingly. Ignore a request for a 2nd video pad if there's already an active one.
2016-10-26 03:32:48 +00:00
splitmux->have_video = FALSE;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
gst_element_remove_pad (element, pad);
splitmuxsink: do not destroy the multiqueue & muxer when going to NULL Instead, delay it until all request pads have been released. This is because the release_pad() vfunc requires the multiqueue and muxer to be there in order to release their request pads as well. If those elements are destroyed earlier, release_pad() does not work, no pads are released and some resources are leaked. https://bugzilla.gnome.org/show_bug.cgi?id=753622
2015-10-24 21:57:29 +00:00
/* Reset the internal elements only after all request pads are released */
if (splitmux->contexts == NULL)
gst_splitmux_reset (splitmux);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
fail:
GST_SPLITMUX_UNLOCK (splitmux);
}
static GstElement *
create_element (GstSplitMuxSink * splitmux,
splitmuxsink: Add format-location-full signal Add a new signal for formatting the filename, which receives a GstSample containing the first buffer from the reference stream that will be muxed into that file. Useful for creating filenames that are based on the running time or other attributes of the buffer. To make it work, opening of files and setting filenames is now deferred until there is some data to write to it, which also requires some changes to how async state changes and gap events are handled.
2016-11-17 12:40:27 +00:00
const gchar * factory, const gchar * name, gboolean locked)
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
{
GstElement *ret = gst_element_factory_make (factory, name);
if (ret == NULL) {
g_warning ("Failed to create %s - splitmuxsink will not work", name);
return NULL;
}
splitmuxsink: Add format-location-full signal Add a new signal for formatting the filename, which receives a GstSample containing the first buffer from the reference stream that will be muxed into that file. Useful for creating filenames that are based on the running time or other attributes of the buffer. To make it work, opening of files and setting filenames is now deferred until there is some data to write to it, which also requires some changes to how async state changes and gap events are handled.
2016-11-17 12:40:27 +00:00
if (locked) {
/* Ensure the sink starts in locked state and NULL - it will be changed
* by the filename setting code */
gst_element_set_locked_state (ret, TRUE);
gst_element_set_state (ret, GST_STATE_NULL);
}
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
if (!gst_bin_add (GST_BIN (splitmux), ret)) {
g_warning ("Could not add %s element - splitmuxsink will not work", name);
gst_object_unref (ret);
return NULL;
}
return ret;
}
static gboolean
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
create_muxer (GstSplitMuxSink * splitmux)
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
{
/* Create internal elements */
if (splitmux->muxer == NULL) {
splitmuxsink: Protect property variables with the object lock. Use the object lock instead of the splitmux lock to protect internal property variables, so they're not locked when switching to a new file. https://bugzilla.gnome.org/show_bug.cgi?id=744420
2015-03-06 13:55:47 +00:00
GstElement *provided_muxer = NULL;
GST_OBJECT_LOCK (splitmux);
if (splitmux->provided_muxer != NULL)
provided_muxer = gst_object_ref (splitmux->provided_muxer);
GST_OBJECT_UNLOCK (splitmux);
if (provided_muxer == NULL) {
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
if ((splitmux->muxer =
splitmuxsink: Add format-location-full signal Add a new signal for formatting the filename, which receives a GstSample containing the first buffer from the reference stream that will be muxed into that file. Useful for creating filenames that are based on the running time or other attributes of the buffer. To make it work, opening of files and setting filenames is now deferred until there is some data to write to it, which also requires some changes to how async state changes and gap events are handled.
2016-11-17 12:40:27 +00:00
create_element (splitmux, "mp4mux", "muxer", FALSE)) == NULL)
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
goto fail;
} else {
splitmuxsink: Set child elements to NULL when removing. Make sure that elements are in the NULL state when removing. Fixes critical warnings when errors occur early on in starting up.
2016-10-25 03:51:52 +00:00
/* Ensure it's not in locked state (we might be reusing an old element) */
gst_element_set_locked_state (provided_muxer, FALSE);
splitmuxsink: do not access property variable without the object lock, use the local stack copy instead
2015-04-15 09:07:27 +00:00
if (!gst_bin_add (GST_BIN (splitmux), provided_muxer)) {
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
g_warning ("Could not add muxer element - splitmuxsink will not work");
splitmuxsink: Protect property variables with the object lock. Use the object lock instead of the splitmux lock to protect internal property variables, so they're not locked when switching to a new file. https://bugzilla.gnome.org/show_bug.cgi?id=744420
2015-03-06 13:55:47 +00:00
gst_object_unref (provided_muxer);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
goto fail;
}
splitmuxsink: Protect property variables with the object lock. Use the object lock instead of the splitmux lock to protect internal property variables, so they're not locked when switching to a new file. https://bugzilla.gnome.org/show_bug.cgi?id=744420
2015-03-06 13:55:47 +00:00
splitmux->muxer = provided_muxer;
gst_object_unref (provided_muxer);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
}
splitmuxsink: Use muxer reserved space properties if present. If the use-robust-muxing property is set, check if the assigned muxer has reserved-max-duration and reserved-duration-remaining properties, and if so set the configured maximum duration to the reserved-max-duration property, and monitor the remaining space to start a new file if the reserved header space is about to run out - even though it never ought to.
2015-04-07 13:53:19 +00:00
if (splitmux->use_robust_muxing) {
update_muxer_properties (splitmux);
}
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
}
return TRUE;
fail:
return FALSE;
}
static GstElement *
find_sink (GstElement * e)
{
GstElement *res = NULL;
GstIterator *iter;
gboolean done = FALSE;
GValue data = { 0, };
if (!GST_IS_BIN (e))
return e;
splitmuxsink: Return a bin with a "location" property as a sink Splitmuxsink might be called with a custom bin as a sink. If it has a "location" property, it can be used.
2016-12-22 15:34:08 +00:00
if (g_object_class_find_property (G_OBJECT_GET_CLASS (e), "location") != NULL)
return e;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
iter = gst_bin_iterate_sinks (GST_BIN (e));
while (!done) {
switch (gst_iterator_next (iter, &data)) {
case GST_ITERATOR_OK:
{
GstElement *child = g_value_get_object (&data);
if (g_object_class_find_property (G_OBJECT_GET_CLASS (child),
"location") != NULL) {
res = child;
done = TRUE;
}
g_value_reset (&data);
break;
}
case GST_ITERATOR_RESYNC:
gst_iterator_resync (iter);
break;
case GST_ITERATOR_DONE:
done = TRUE;
break;
case GST_ITERATOR_ERROR:
g_assert_not_reached ();
break;
}
}
g_value_unset (&data);
gst_iterator_free (iter);
return res;
}
static gboolean
create_sink (GstSplitMuxSink * splitmux)
{
splitmuxsink: Protect property variables with the object lock. Use the object lock instead of the splitmux lock to protect internal property variables, so they're not locked when switching to a new file. https://bugzilla.gnome.org/show_bug.cgi?id=744420
2015-03-06 13:55:47 +00:00
GstElement *provided_sink = NULL;
splitmuxsink: only try to create internal sink if it doesn't exist This allows splitmuxsink to be reused after being put to NULL. Test included https://bugzilla.gnome.org/show_bug.cgi?id=762893
2016-03-01 02:40:03 +00:00
if (splitmux->active_sink == NULL) {
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmuxsink: only try to create internal sink if it doesn't exist This allows splitmuxsink to be reused after being put to NULL. Test included https://bugzilla.gnome.org/show_bug.cgi?id=762893
2016-03-01 02:40:03 +00:00
GST_OBJECT_LOCK (splitmux);
if (splitmux->provided_sink != NULL)
provided_sink = gst_object_ref (splitmux->provided_sink);
GST_OBJECT_UNLOCK (splitmux);
splitmuxsink: Protect property variables with the object lock. Use the object lock instead of the splitmux lock to protect internal property variables, so they're not locked when switching to a new file. https://bugzilla.gnome.org/show_bug.cgi?id=744420
2015-03-06 13:55:47 +00:00
splitmuxsink: only try to create internal sink if it doesn't exist This allows splitmuxsink to be reused after being put to NULL. Test included https://bugzilla.gnome.org/show_bug.cgi?id=762893
2016-03-01 02:40:03 +00:00
if (provided_sink == NULL) {
if ((splitmux->sink =
splitmuxsink: Add format-location-full signal Add a new signal for formatting the filename, which receives a GstSample containing the first buffer from the reference stream that will be muxed into that file. Useful for creating filenames that are based on the running time or other attributes of the buffer. To make it work, opening of files and setting filenames is now deferred until there is some data to write to it, which also requires some changes to how async state changes and gap events are handled.
2016-11-17 12:40:27 +00:00
create_element (splitmux, DEFAULT_SINK, "sink", TRUE)) == NULL)
splitmuxsink: only try to create internal sink if it doesn't exist This allows splitmuxsink to be reused after being put to NULL. Test included https://bugzilla.gnome.org/show_bug.cgi?id=762893
2016-03-01 02:40:03 +00:00
goto fail;
splitmux->active_sink = splitmux->sink;
} else {
splitmuxsink: Add format-location-full signal Add a new signal for formatting the filename, which receives a GstSample containing the first buffer from the reference stream that will be muxed into that file. Useful for creating filenames that are based on the running time or other attributes of the buffer. To make it work, opening of files and setting filenames is now deferred until there is some data to write to it, which also requires some changes to how async state changes and gap events are handled.
2016-11-17 12:40:27 +00:00
/* Ensure the sink starts in locked state and NULL - it will be changed
* by the filename setting code */
gst_element_set_locked_state (provided_sink, TRUE);
gst_element_set_state (provided_sink, GST_STATE_NULL);
splitmuxsink: only try to create internal sink if it doesn't exist This allows splitmuxsink to be reused after being put to NULL. Test included https://bugzilla.gnome.org/show_bug.cgi?id=762893
2016-03-01 02:40:03 +00:00
if (!gst_bin_add (GST_BIN (splitmux), provided_sink)) {
g_warning ("Could not add sink elements - splitmuxsink will not work");
gst_object_unref (provided_sink);
goto fail;
}
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmuxsink: only try to create internal sink if it doesn't exist This allows splitmuxsink to be reused after being put to NULL. Test included https://bugzilla.gnome.org/show_bug.cgi?id=762893
2016-03-01 02:40:03 +00:00
splitmux->active_sink = provided_sink;
splitmuxsink: Protect property variables with the object lock. Use the object lock instead of the splitmux lock to protect internal property variables, so they're not locked when switching to a new file. https://bugzilla.gnome.org/show_bug.cgi?id=744420
2015-03-06 13:55:47 +00:00
splitmuxsink: only try to create internal sink if it doesn't exist This allows splitmuxsink to be reused after being put to NULL. Test included https://bugzilla.gnome.org/show_bug.cgi?id=762893
2016-03-01 02:40:03 +00:00
/* The bin holds a ref now, we can drop our tmp ref */
gst_object_unref (provided_sink);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmuxsink: only try to create internal sink if it doesn't exist This allows splitmuxsink to be reused after being put to NULL. Test included https://bugzilla.gnome.org/show_bug.cgi?id=762893
2016-03-01 02:40:03 +00:00
/* Find the sink element */
splitmux->sink = find_sink (splitmux->active_sink);
if (splitmux->sink == NULL) {
g_warning
("Could not locate sink element in provided sink - splitmuxsink will not work");
goto fail;
}
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
}
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
#if 1
if (g_object_class_find_property (G_OBJECT_GET_CLASS (splitmux->sink),
"async") != NULL) {
/* async child elements are causing state change races and weird
* failures, so let's try and turn that off */
g_object_set (splitmux->sink, "async", FALSE, NULL);
}
#endif
splitmuxsink: only try to create internal sink if it doesn't exist This allows splitmuxsink to be reused after being put to NULL. Test included https://bugzilla.gnome.org/show_bug.cgi?id=762893
2016-03-01 02:40:03 +00:00
if (!gst_element_link (splitmux->muxer, splitmux->active_sink)) {
g_warning ("Failed to link muxer and sink- splitmuxsink will not work");
goto fail;
}
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
}
return TRUE;
fail:
return FALSE;
}
#ifdef __GNUC__
#pragma GCC diagnostic ignored "-Wformat-nonliteral"
#endif
static void
splitmuxsink: Add format-location-full signal Add a new signal for formatting the filename, which receives a GstSample containing the first buffer from the reference stream that will be muxed into that file. Useful for creating filenames that are based on the running time or other attributes of the buffer. To make it work, opening of files and setting filenames is now deferred until there is some data to write to it, which also requires some changes to how async state changes and gap events are handled.
2016-11-17 12:40:27 +00:00
set_next_filename (GstSplitMuxSink * splitmux, MqStreamCtx * ctx)
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
{
splitmuxsink: add a "format-location" signal that allows better control over filenames In certain applications, splitting into files named after a base location template and an incremental sequence number is not enough. This signal gives more fine-grained control to the application to decide how to name the files. https://bugzilla.gnome.org/show_bug.cgi?id=750106
2015-04-15 16:27:04 +00:00
gchar *fname = NULL;
splitmuxsink: Add format-location-full signal Add a new signal for formatting the filename, which receives a GstSample containing the first buffer from the reference stream that will be muxed into that file. Useful for creating filenames that are based on the running time or other attributes of the buffer. To make it work, opening of files and setting filenames is now deferred until there is some data to write to it, which also requires some changes to how async state changes and gap events are handled.
2016-11-17 12:40:27 +00:00
GstSample *sample;
GstCaps *caps;
splitmuxsink: Add max_files_number property https://bugzilla.gnome.org/show_bug.cgi?id=744612
2016-04-13 17:45:07 +00:00
gst_splitmux_sink_ensure_max_files (splitmux);
splitmuxsink: add a "format-location" signal that allows better control over filenames In certain applications, splitting into files named after a base location template and an incremental sequence number is not enough. This signal gives more fine-grained control to the application to decide how to name the files. https://bugzilla.gnome.org/show_bug.cgi?id=750106
2015-04-15 16:27:04 +00:00
splitmuxsink: Add option for timecode-based split If this option is given, it will calculate the next split point based on timecode difference. https://bugzilla.gnome.org/show_bug.cgi?id=774209
2016-12-22 15:40:40 +00:00
if (ctx->cur_out_buffer == NULL) {
GST_WARNING_OBJECT (splitmux, "Starting next file without buffer");
}
splitmuxsink: Add format-location-full signal Add a new signal for formatting the filename, which receives a GstSample containing the first buffer from the reference stream that will be muxed into that file. Useful for creating filenames that are based on the running time or other attributes of the buffer. To make it work, opening of files and setting filenames is now deferred until there is some data to write to it, which also requires some changes to how async state changes and gap events are handled.
2016-11-17 12:40:27 +00:00
caps = gst_pad_get_current_caps (ctx->srcpad);
splitmuxsink: Add option for timecode-based split If this option is given, it will calculate the next split point based on timecode difference. https://bugzilla.gnome.org/show_bug.cgi?id=774209
2016-12-22 15:40:40 +00:00
sample = gst_sample_new (ctx->cur_out_buffer, caps, &ctx->out_segment, NULL);
splitmuxsink: Add format-location-full signal Add a new signal for formatting the filename, which receives a GstSample containing the first buffer from the reference stream that will be muxed into that file. Useful for creating filenames that are based on the running time or other attributes of the buffer. To make it work, opening of files and setting filenames is now deferred until there is some data to write to it, which also requires some changes to how async state changes and gap events are handled.
2016-11-17 12:40:27 +00:00
g_signal_emit (splitmux, signals[SIGNAL_FORMAT_LOCATION_FULL], 0,
splitmux->fragment_id, sample, &fname);
gst_sample_unref (sample);
if (caps)
gst_caps_unref (caps);
if (fname == NULL) {
/* Fallback to the old signal if the new one returned nothing */
g_signal_emit (splitmux, signals[SIGNAL_FORMAT_LOCATION], 0,
splitmux->fragment_id, &fname);
}
splitmuxsink: add a "format-location" signal that allows better control over filenames In certain applications, splitting into files named after a base location template and an incremental sequence number is not enough. This signal gives more fine-grained control to the application to decide how to name the files. https://bugzilla.gnome.org/show_bug.cgi?id=750106
2015-04-15 16:27:04 +00:00
if (!fname)
fname = splitmux->location ?
g_strdup_printf (splitmux->location, splitmux->fragment_id) : NULL;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
splitmuxsink: add a "format-location" signal that allows better control over filenames In certain applications, splitting into files named after a base location template and an incremental sequence number is not enough. This signal gives more fine-grained control to the application to decide how to name the files. https://bugzilla.gnome.org/show_bug.cgi?id=750106
2015-04-15 16:27:04 +00:00
if (fname) {
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
GST_INFO_OBJECT (splitmux, "Setting file to %s", fname);
g_object_set (splitmux->sink, "location", fname, NULL);
g_free (fname);
splitmux->fragment_id++;
}
}
splitmuxsink: Add format-location-full signal Add a new signal for formatting the filename, which receives a GstSample containing the first buffer from the reference stream that will be muxed into that file. Useful for creating filenames that are based on the running time or other attributes of the buffer. To make it work, opening of files and setting filenames is now deferred until there is some data to write to it, which also requires some changes to how async state changes and gap events are handled.
2016-11-17 12:40:27 +00:00
static void
do_async_start (GstSplitMuxSink * splitmux)
{
GstMessage *message;
if (!splitmux->need_async_start) {
GST_INFO_OBJECT (splitmux, "no async_start needed");
return;
}
splitmux->async_pending = TRUE;
GST_INFO_OBJECT (splitmux, "Sending async_start message");
message = gst_message_new_async_start (GST_OBJECT_CAST (splitmux));
GST_BIN_CLASS (parent_class)->handle_message (GST_BIN_CAST
(splitmux), message);
}
static void
do_async_done (GstSplitMuxSink * splitmux)
{
GstMessage *message;
if (splitmux->async_pending) {
GST_INFO_OBJECT (splitmux, "Sending async_done message");
message =
gst_message_new_async_done (GST_OBJECT_CAST (splitmux),
GST_CLOCK_TIME_NONE);
GST_BIN_CLASS (parent_class)->handle_message (GST_BIN_CAST
(splitmux), message);
splitmux->async_pending = FALSE;
}
splitmux->need_async_start = FALSE;
}
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
static GstStateChangeReturn
gst_splitmux_sink_change_state (GstElement * element, GstStateChange transition)
{
GstStateChangeReturn ret;
GstSplitMuxSink *splitmux = (GstSplitMuxSink *) element;
switch (transition) {
case GST_STATE_CHANGE_NULL_TO_READY:{
GST_SPLITMUX_LOCK (splitmux);
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
if (!create_muxer (splitmux) || !create_sink (splitmux)) {
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
ret = GST_STATE_CHANGE_FAILURE;
GST_SPLITMUX_UNLOCK (splitmux);
goto beach;
}
GST_SPLITMUX_UNLOCK (splitmux);
splitmux->fragment_id = 0;
break;
}
case GST_STATE_CHANGE_READY_TO_PAUSED:{
GST_SPLITMUX_LOCK (splitmux);
/* Start by collecting one input on each pad */
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
splitmux->input_state = SPLITMUX_INPUT_STATE_COLLECTING_GOP_START;
splitmux->output_state = SPLITMUX_OUTPUT_STATE_START_NEXT_FILE;
splitmuxsink: Handle negative running time Use signed clock times for running time everywhere so that we handle negative running times without going haywire, similar to what queue and multiqueue do these days.
2016-07-17 12:41:02 +00:00
splitmux->max_in_running_time = GST_CLOCK_STIME_NONE;
splitmuxsink: Remove unused muxed_out_time https://bugzilla.gnome.org/show_bug.cgi?id=761761
2017-02-15 20:07:32 +00:00
splitmux->gop_start_time = splitmux->fragment_start_time =
GST_CLOCK_STIME_NONE;
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
splitmux->muxed_out_bytes = 0;
splitmuxsink: Reset ready_for_output on state change https://bugzilla.gnome.org/show_bug.cgi?id=761761
2017-02-15 21:35:01 +00:00
splitmux->ready_for_output = FALSE;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
GST_SPLITMUX_UNLOCK (splitmux);
break;
}
case GST_STATE_CHANGE_PAUSED_TO_READY:
splitmuxsink: added a "split now" action signal Now, the video file can be split at an arbitrary time chosen by the user. https://bugzilla.gnome.org/show_bug.cgi?id=787922
2017-09-21 15:23:54 +00:00
g_atomic_int_set (&(splitmux->split_now), FALSE);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
case GST_STATE_CHANGE_READY_TO_NULL:
GST_SPLITMUX_LOCK (splitmux);
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
splitmux->output_state = SPLITMUX_OUTPUT_STATE_STOPPED;
splitmux->input_state = SPLITMUX_INPUT_STATE_STOPPED;
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
/* Wake up any blocked threads */
GST_LOG_OBJECT (splitmux,
"State change -> NULL or READY. Waking threads");
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
GST_SPLITMUX_BROADCAST_INPUT (splitmux);
GST_SPLITMUX_BROADCAST_OUTPUT (splitmux);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
GST_SPLITMUX_UNLOCK (splitmux);
break;
default:
break;
}
ret = GST_ELEMENT_CLASS (parent_class)->change_state (element, transition);
if (ret == GST_STATE_CHANGE_FAILURE)
goto beach;
switch (transition) {
splitmuxsink: Add format-location-full signal Add a new signal for formatting the filename, which receives a GstSample containing the first buffer from the reference stream that will be muxed into that file. Useful for creating filenames that are based on the running time or other attributes of the buffer. To make it work, opening of files and setting filenames is now deferred until there is some data to write to it, which also requires some changes to how async state changes and gap events are handled.
2016-11-17 12:40:27 +00:00
case GST_STATE_CHANGE_PLAYING_TO_PAUSED:
splitmux->need_async_start = TRUE;
break;
case GST_STATE_CHANGE_READY_TO_PAUSED:{
/* Change state async, because our child sink might not
* be ready to do that for us yet if it's state is still locked */
splitmux->need_async_start = TRUE;
/* we want to go async to PAUSED until we managed to configure and add the
* sink */
GST_SPLITMUX_LOCK (splitmux);
do_async_start (splitmux);
GST_SPLITMUX_UNLOCK (splitmux);
ret = GST_STATE_CHANGE_ASYNC;
break;
}
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
case GST_STATE_CHANGE_READY_TO_NULL:
GST_SPLITMUX_LOCK (splitmux);
splitmux->fragment_id = 0;
splitmuxsink: do not destroy the multiqueue & muxer when going to NULL Instead, delay it until all request pads have been released. This is because the release_pad() vfunc requires the multiqueue and muxer to be there in order to release their request pads as well. If those elements are destroyed earlier, release_pad() does not work, no pads are released and some resources are leaked. https://bugzilla.gnome.org/show_bug.cgi?id=753622
2015-10-24 21:57:29 +00:00
/* Reset internal elements only if no pad contexts are using them */
if (splitmux->contexts == NULL)
gst_splitmux_reset (splitmux);
splitmuxsink: Add format-location-full signal Add a new signal for formatting the filename, which receives a GstSample containing the first buffer from the reference stream that will be muxed into that file. Useful for creating filenames that are based on the running time or other attributes of the buffer. To make it work, opening of files and setting filenames is now deferred until there is some data to write to it, which also requires some changes to how async state changes and gap events are handled.
2016-11-17 12:40:27 +00:00
do_async_done (splitmux);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
GST_SPLITMUX_UNLOCK (splitmux);
break;
default:
break;
}
beach:
if (transition == GST_STATE_CHANGE_NULL_TO_READY &&
ret == GST_STATE_CHANGE_FAILURE) {
/* Cleanup elements on failed transition out of NULL */
gst_splitmux_reset (splitmux);
splitmux: Rewrite buffer collection and scheduling Majorly change the way that splitmuxsink collects incoming data and sends it to the output, so that it makes all decisions about when / where to split files on the input side. Use separate queues for each stream, so they can be grown individually and kept as small as possible. This removes raciness I observed where sometimes some data would end up put in a different output file over multiple runs with the same input. Also fixes hangs with input queues getting full and causing muxing to stall out.
2016-11-18 11:42:18 +00:00
GST_SPLITMUX_LOCK (splitmux);
do_async_done (splitmux);
GST_SPLITMUX_UNLOCK (splitmux);
splitmux: Implement new elements for splitting files at mux level. Implement 2 new elements - splitmuxsink and splitmuxsrc. splitmuxsink is a bin which wraps a muxer and takes 1 video stream, plus audio/subtitle streams, and starts a new file whenever necessary to avoid overrunning a threshold of either bytes or time. New files are started at a keyframe, and corresponding audio and subtitle streams are split at packet boundaries to match video GOP timestamps. splitmuxsrc is a corresponding source element which handles the splitmux:// URL and plays back all component files, reconstructing the original elementary streams as it goes.
2014-07-31 14:07:53 +00:00
}
return ret;
}
gboolean
register_splitmuxsink (GstPlugin * plugin)
{
GST_DEBUG_CATEGORY_INIT (splitmux_debug, "splitmuxsink", 0,
"Split File Muxing Sink");
return gst_element_register (plugin, "splitmuxsink", GST_RANK_NONE,
GST_TYPE_SPLITMUX_SINK);
}
splitmuxsink: Add max_files_number property https://bugzilla.gnome.org/show_bug.cgi?id=744612
2016-04-13 17:45:07 +00:00
static void
gst_splitmux_sink_ensure_max_files (GstSplitMuxSink * splitmux)
{
if (splitmux->max_files && splitmux->fragment_id >= splitmux->max_files) {
splitmux->fragment_id = 0;
}
}
splitmuxsink: added a "split now" action signal Now, the video file can be split at an arbitrary time chosen by the user. https://bugzilla.gnome.org/show_bug.cgi?id=787922
2017-09-21 15:23:54 +00:00
static void
split_now (GstSplitMuxSink * splitmux)
{
g_atomic_int_set (&(splitmux->split_now), TRUE);
}
Reference in a new issue Copy permalink