gotosocial/vendor/github.com/prometheus/procfs/proc_stat.go
Tsuribori 1ba3e14b36
[feature] Initial Prometheus metrics implementation (#2334)
* feat: Initial OTEL metrics

* docs: add metrics documentation

* fix: metrics endpoint conditional check

* feat: metrics endpoint basic auth

* fix: make metrics-auth-enabled default false

* fix: go fmt helpers.gen.go

* fix: add metric-related env vars to envparsing.sh

* fix: metrics docs

* fix: metrics related stuff in envparsing.sh

* fix: metrics docs

* chore: metrics docs wording

* fix: metrics stuff in envparsing?

* bump otel versions

---------

Co-authored-by: Tsuribori <user@acertaindebian>
Co-authored-by: Tsuribori <none@example.org>
Co-authored-by: tsmethurst <tobi.smethurst@protonmail.com>
2023-11-20 16:43:55 +01:00

222 lines
6.2 KiB
Go

// Copyright 2018 The Prometheus Authors
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package procfs
import (
"bytes"
"fmt"
"os"
"github.com/prometheus/procfs/internal/util"
)
// Originally, this USER_HZ value was dynamically retrieved via a sysconf call
// which required cgo. However, that caused a lot of problems regarding
// cross-compilation. Alternatives such as running a binary to determine the
// value, or trying to derive it in some other way were all problematic. After
// much research it was determined that USER_HZ is actually hardcoded to 100 on
// all Go-supported platforms as of the time of this writing. This is why we
// decided to hardcode it here as well. It is not impossible that there could
// be systems with exceptions, but they should be very exotic edge cases, and
// in that case, the worst outcome will be two misreported metrics.
//
// See also the following discussions:
//
// - https://github.com/prometheus/node_exporter/issues/52
// - https://github.com/prometheus/procfs/pull/2
// - http://stackoverflow.com/questions/17410841/how-does-user-hz-solve-the-jiffy-scaling-issue
const userHZ = 100
// ProcStat provides status information about the process,
// read from /proc/[pid]/stat.
type ProcStat struct {
// The process ID.
PID int
// The filename of the executable.
Comm string
// The process state.
State string
// The PID of the parent of this process.
PPID int
// The process group ID of the process.
PGRP int
// The session ID of the process.
Session int
// The controlling terminal of the process.
TTY int
// The ID of the foreground process group of the controlling terminal of
// the process.
TPGID int
// The kernel flags word of the process.
Flags uint
// The number of minor faults the process has made which have not required
// loading a memory page from disk.
MinFlt uint
// The number of minor faults that the process's waited-for children have
// made.
CMinFlt uint
// The number of major faults the process has made which have required
// loading a memory page from disk.
MajFlt uint
// The number of major faults that the process's waited-for children have
// made.
CMajFlt uint
// Amount of time that this process has been scheduled in user mode,
// measured in clock ticks.
UTime uint
// Amount of time that this process has been scheduled in kernel mode,
// measured in clock ticks.
STime uint
// Amount of time that this process's waited-for children have been
// scheduled in user mode, measured in clock ticks.
CUTime int
// Amount of time that this process's waited-for children have been
// scheduled in kernel mode, measured in clock ticks.
CSTime int
// For processes running a real-time scheduling policy, this is the negated
// scheduling priority, minus one.
Priority int
// The nice value, a value in the range 19 (low priority) to -20 (high
// priority).
Nice int
// Number of threads in this process.
NumThreads int
// The time the process started after system boot, the value is expressed
// in clock ticks.
Starttime uint64
// Virtual memory size in bytes.
VSize uint
// Resident set size in pages.
RSS int
// Soft limit in bytes on the rss of the process.
RSSLimit uint64
// CPU number last executed on.
Processor uint
// Real-time scheduling priority, a number in the range 1 to 99 for processes
// scheduled under a real-time policy, or 0, for non-real-time processes.
RTPriority uint
// Scheduling policy.
Policy uint
// Aggregated block I/O delays, measured in clock ticks (centiseconds).
DelayAcctBlkIOTicks uint64
proc FS
}
// NewStat returns the current status information of the process.
//
// Deprecated: Use p.Stat() instead.
func (p Proc) NewStat() (ProcStat, error) {
return p.Stat()
}
// Stat returns the current status information of the process.
func (p Proc) Stat() (ProcStat, error) {
data, err := util.ReadFileNoStat(p.path("stat"))
if err != nil {
return ProcStat{}, err
}
var (
ignoreInt64 int64
ignoreUint64 uint64
s = ProcStat{PID: p.PID, proc: p.fs}
l = bytes.Index(data, []byte("("))
r = bytes.LastIndex(data, []byte(")"))
)
if l < 0 || r < 0 {
return ProcStat{}, fmt.Errorf("%w: unexpected format, couldn't extract comm %q", ErrFileParse, data)
}
s.Comm = string(data[l+1 : r])
// Check the following resources for the details about the particular stat
// fields and their data types:
// * https://man7.org/linux/man-pages/man5/proc.5.html
// * https://man7.org/linux/man-pages/man3/scanf.3.html
_, err = fmt.Fscan(
bytes.NewBuffer(data[r+2:]),
&s.State,
&s.PPID,
&s.PGRP,
&s.Session,
&s.TTY,
&s.TPGID,
&s.Flags,
&s.MinFlt,
&s.CMinFlt,
&s.MajFlt,
&s.CMajFlt,
&s.UTime,
&s.STime,
&s.CUTime,
&s.CSTime,
&s.Priority,
&s.Nice,
&s.NumThreads,
&ignoreInt64,
&s.Starttime,
&s.VSize,
&s.RSS,
&s.RSSLimit,
&ignoreUint64,
&ignoreUint64,
&ignoreUint64,
&ignoreUint64,
&ignoreUint64,
&ignoreUint64,
&ignoreUint64,
&ignoreUint64,
&ignoreUint64,
&ignoreUint64,
&ignoreUint64,
&ignoreUint64,
&ignoreInt64,
&s.Processor,
&s.RTPriority,
&s.Policy,
&s.DelayAcctBlkIOTicks,
)
if err != nil {
return ProcStat{}, err
}
return s, nil
}
// VirtualMemory returns the virtual memory size in bytes.
func (s ProcStat) VirtualMemory() uint {
return s.VSize
}
// ResidentMemory returns the resident memory size in bytes.
func (s ProcStat) ResidentMemory() int {
return s.RSS * os.Getpagesize()
}
// StartTime returns the unix timestamp of the process in seconds.
func (s ProcStat) StartTime() (float64, error) {
stat, err := s.proc.Stat()
if err != nil {
return 0, err
}
return float64(stat.BootTime) + (float64(s.Starttime) / userHZ), nil
}
// CPUTime returns the total CPU user and system time in seconds.
func (s ProcStat) CPUTime() float64 {
return float64(s.UTime+s.STime) / userHZ
}