gotosocial/vendor/github.com/klauspost/compress/flate/huffman_bit_writer.go
dependabot[bot] 752c38b0d5
[chore]: Bump github.com/minio/minio-go/v7 from 7.0.48 to 7.0.49 (#1567)
Bumps [github.com/minio/minio-go/v7](https://github.com/minio/minio-go) from 7.0.48 to 7.0.49.
- [Release notes](https://github.com/minio/minio-go/releases)
- [Commits](https://github.com/minio/minio-go/compare/v7.0.48...v7.0.49)

---
updated-dependencies:
- dependency-name: github.com/minio/minio-go/v7
  dependency-type: direct:production
  update-type: version-update:semver-patch
...

Signed-off-by: dependabot[bot] <support@github.com>
Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com>
2023-02-27 10:21:58 +01:00

1188 lines
30 KiB
Go

// Copyright 2009 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
package flate
import (
"encoding/binary"
"fmt"
"io"
"math"
)
const (
// The largest offset code.
offsetCodeCount = 30
// The special code used to mark the end of a block.
endBlockMarker = 256
// The first length code.
lengthCodesStart = 257
// The number of codegen codes.
codegenCodeCount = 19
badCode = 255
// maxPredefinedTokens is the maximum number of tokens
// where we check if fixed size is smaller.
maxPredefinedTokens = 250
// bufferFlushSize indicates the buffer size
// after which bytes are flushed to the writer.
// Should preferably be a multiple of 6, since
// we accumulate 6 bytes between writes to the buffer.
bufferFlushSize = 246
// bufferSize is the actual output byte buffer size.
// It must have additional headroom for a flush
// which can contain up to 8 bytes.
bufferSize = bufferFlushSize + 8
)
// Minimum length code that emits bits.
const lengthExtraBitsMinCode = 8
// The number of extra bits needed by length code X - LENGTH_CODES_START.
var lengthExtraBits = [32]uint8{
/* 257 */ 0, 0, 0,
/* 260 */ 0, 0, 0, 0, 0, 1, 1, 1, 1, 2,
/* 270 */ 2, 2, 2, 3, 3, 3, 3, 4, 4, 4,
/* 280 */ 4, 5, 5, 5, 5, 0,
}
// The length indicated by length code X - LENGTH_CODES_START.
var lengthBase = [32]uint8{
0, 1, 2, 3, 4, 5, 6, 7, 8, 10,
12, 14, 16, 20, 24, 28, 32, 40, 48, 56,
64, 80, 96, 112, 128, 160, 192, 224, 255,
}
// Minimum offset code that emits bits.
const offsetExtraBitsMinCode = 4
// offset code word extra bits.
var offsetExtraBits = [32]int8{
0, 0, 0, 0, 1, 1, 2, 2, 3, 3,
4, 4, 5, 5, 6, 6, 7, 7, 8, 8,
9, 9, 10, 10, 11, 11, 12, 12, 13, 13,
/* extended window */
14, 14,
}
var offsetCombined = [32]uint32{}
func init() {
var offsetBase = [32]uint32{
/* normal deflate */
0x000000, 0x000001, 0x000002, 0x000003, 0x000004,
0x000006, 0x000008, 0x00000c, 0x000010, 0x000018,
0x000020, 0x000030, 0x000040, 0x000060, 0x000080,
0x0000c0, 0x000100, 0x000180, 0x000200, 0x000300,
0x000400, 0x000600, 0x000800, 0x000c00, 0x001000,
0x001800, 0x002000, 0x003000, 0x004000, 0x006000,
/* extended window */
0x008000, 0x00c000,
}
for i := range offsetCombined[:] {
// Don't use extended window values...
if offsetExtraBits[i] == 0 || offsetBase[i] > 0x006000 {
continue
}
offsetCombined[i] = uint32(offsetExtraBits[i]) | (offsetBase[i] << 8)
}
}
// The odd order in which the codegen code sizes are written.
var codegenOrder = []uint32{16, 17, 18, 0, 8, 7, 9, 6, 10, 5, 11, 4, 12, 3, 13, 2, 14, 1, 15}
type huffmanBitWriter struct {
// writer is the underlying writer.
// Do not use it directly; use the write method, which ensures
// that Write errors are sticky.
writer io.Writer
// Data waiting to be written is bytes[0:nbytes]
// and then the low nbits of bits.
bits uint64
nbits uint8
nbytes uint8
lastHuffMan bool
literalEncoding *huffmanEncoder
tmpLitEncoding *huffmanEncoder
offsetEncoding *huffmanEncoder
codegenEncoding *huffmanEncoder
err error
lastHeader int
// Set between 0 (reused block can be up to 2x the size)
logNewTablePenalty uint
bytes [256 + 8]byte
literalFreq [lengthCodesStart + 32]uint16
offsetFreq [32]uint16
codegenFreq [codegenCodeCount]uint16
// codegen must have an extra space for the final symbol.
codegen [literalCount + offsetCodeCount + 1]uint8
}
// Huffman reuse.
//
// The huffmanBitWriter supports reusing huffman tables and thereby combining block sections.
//
// This is controlled by several variables:
//
// If lastHeader is non-zero the Huffman table can be reused.
// This also indicates that a Huffman table has been generated that can output all
// possible symbols.
// It also indicates that an EOB has not yet been emitted, so if a new tabel is generated
// an EOB with the previous table must be written.
//
// If lastHuffMan is set, a table for outputting literals has been generated and offsets are invalid.
//
// An incoming block estimates the output size of a new table using a 'fresh' by calculating the
// optimal size and adding a penalty in 'logNewTablePenalty'.
// A Huffman table is not optimal, which is why we add a penalty, and generating a new table
// is slower both for compression and decompression.
func newHuffmanBitWriter(w io.Writer) *huffmanBitWriter {
return &huffmanBitWriter{
writer: w,
literalEncoding: newHuffmanEncoder(literalCount),
tmpLitEncoding: newHuffmanEncoder(literalCount),
codegenEncoding: newHuffmanEncoder(codegenCodeCount),
offsetEncoding: newHuffmanEncoder(offsetCodeCount),
}
}
func (w *huffmanBitWriter) reset(writer io.Writer) {
w.writer = writer
w.bits, w.nbits, w.nbytes, w.err = 0, 0, 0, nil
w.lastHeader = 0
w.lastHuffMan = false
}
func (w *huffmanBitWriter) canReuse(t *tokens) (ok bool) {
a := t.offHist[:offsetCodeCount]
b := w.offsetEncoding.codes
b = b[:len(a)]
for i, v := range a {
if v != 0 && b[i].zero() {
return false
}
}
a = t.extraHist[:literalCount-256]
b = w.literalEncoding.codes[256:literalCount]
b = b[:len(a)]
for i, v := range a {
if v != 0 && b[i].zero() {
return false
}
}
a = t.litHist[:256]
b = w.literalEncoding.codes[:len(a)]
for i, v := range a {
if v != 0 && b[i].zero() {
return false
}
}
return true
}
func (w *huffmanBitWriter) flush() {
if w.err != nil {
w.nbits = 0
return
}
if w.lastHeader > 0 {
// We owe an EOB
w.writeCode(w.literalEncoding.codes[endBlockMarker])
w.lastHeader = 0
}
n := w.nbytes
for w.nbits != 0 {
w.bytes[n] = byte(w.bits)
w.bits >>= 8
if w.nbits > 8 { // Avoid underflow
w.nbits -= 8
} else {
w.nbits = 0
}
n++
}
w.bits = 0
w.write(w.bytes[:n])
w.nbytes = 0
}
func (w *huffmanBitWriter) write(b []byte) {
if w.err != nil {
return
}
_, w.err = w.writer.Write(b)
}
func (w *huffmanBitWriter) writeBits(b int32, nb uint8) {
w.bits |= uint64(b) << (w.nbits & 63)
w.nbits += nb
if w.nbits >= 48 {
w.writeOutBits()
}
}
func (w *huffmanBitWriter) writeBytes(bytes []byte) {
if w.err != nil {
return
}
n := w.nbytes
if w.nbits&7 != 0 {
w.err = InternalError("writeBytes with unfinished bits")
return
}
for w.nbits != 0 {
w.bytes[n] = byte(w.bits)
w.bits >>= 8
w.nbits -= 8
n++
}
if n != 0 {
w.write(w.bytes[:n])
}
w.nbytes = 0
w.write(bytes)
}
// RFC 1951 3.2.7 specifies a special run-length encoding for specifying
// the literal and offset lengths arrays (which are concatenated into a single
// array). This method generates that run-length encoding.
//
// The result is written into the codegen array, and the frequencies
// of each code is written into the codegenFreq array.
// Codes 0-15 are single byte codes. Codes 16-18 are followed by additional
// information. Code badCode is an end marker
//
// numLiterals The number of literals in literalEncoding
// numOffsets The number of offsets in offsetEncoding
// litenc, offenc The literal and offset encoder to use
func (w *huffmanBitWriter) generateCodegen(numLiterals int, numOffsets int, litEnc, offEnc *huffmanEncoder) {
for i := range w.codegenFreq {
w.codegenFreq[i] = 0
}
// Note that we are using codegen both as a temporary variable for holding
// a copy of the frequencies, and as the place where we put the result.
// This is fine because the output is always shorter than the input used
// so far.
codegen := w.codegen[:] // cache
// Copy the concatenated code sizes to codegen. Put a marker at the end.
cgnl := codegen[:numLiterals]
for i := range cgnl {
cgnl[i] = litEnc.codes[i].len()
}
cgnl = codegen[numLiterals : numLiterals+numOffsets]
for i := range cgnl {
cgnl[i] = offEnc.codes[i].len()
}
codegen[numLiterals+numOffsets] = badCode
size := codegen[0]
count := 1
outIndex := 0
for inIndex := 1; size != badCode; inIndex++ {
// INVARIANT: We have seen "count" copies of size that have not yet
// had output generated for them.
nextSize := codegen[inIndex]
if nextSize == size {
count++
continue
}
// We need to generate codegen indicating "count" of size.
if size != 0 {
codegen[outIndex] = size
outIndex++
w.codegenFreq[size]++
count--
for count >= 3 {
n := 6
if n > count {
n = count
}
codegen[outIndex] = 16
outIndex++
codegen[outIndex] = uint8(n - 3)
outIndex++
w.codegenFreq[16]++
count -= n
}
} else {
for count >= 11 {
n := 138
if n > count {
n = count
}
codegen[outIndex] = 18
outIndex++
codegen[outIndex] = uint8(n - 11)
outIndex++
w.codegenFreq[18]++
count -= n
}
if count >= 3 {
// count >= 3 && count <= 10
codegen[outIndex] = 17
outIndex++
codegen[outIndex] = uint8(count - 3)
outIndex++
w.codegenFreq[17]++
count = 0
}
}
count--
for ; count >= 0; count-- {
codegen[outIndex] = size
outIndex++
w.codegenFreq[size]++
}
// Set up invariant for next time through the loop.
size = nextSize
count = 1
}
// Marker indicating the end of the codegen.
codegen[outIndex] = badCode
}
func (w *huffmanBitWriter) codegens() int {
numCodegens := len(w.codegenFreq)
for numCodegens > 4 && w.codegenFreq[codegenOrder[numCodegens-1]] == 0 {
numCodegens--
}
return numCodegens
}
func (w *huffmanBitWriter) headerSize() (size, numCodegens int) {
numCodegens = len(w.codegenFreq)
for numCodegens > 4 && w.codegenFreq[codegenOrder[numCodegens-1]] == 0 {
numCodegens--
}
return 3 + 5 + 5 + 4 + (3 * numCodegens) +
w.codegenEncoding.bitLength(w.codegenFreq[:]) +
int(w.codegenFreq[16])*2 +
int(w.codegenFreq[17])*3 +
int(w.codegenFreq[18])*7, numCodegens
}
// dynamicSize returns the size of dynamically encoded data in bits.
func (w *huffmanBitWriter) dynamicReuseSize(litEnc, offEnc *huffmanEncoder) (size int) {
size = litEnc.bitLength(w.literalFreq[:]) +
offEnc.bitLength(w.offsetFreq[:])
return size
}
// dynamicSize returns the size of dynamically encoded data in bits.
func (w *huffmanBitWriter) dynamicSize(litEnc, offEnc *huffmanEncoder, extraBits int) (size, numCodegens int) {
header, numCodegens := w.headerSize()
size = header +
litEnc.bitLength(w.literalFreq[:]) +
offEnc.bitLength(w.offsetFreq[:]) +
extraBits
return size, numCodegens
}
// extraBitSize will return the number of bits that will be written
// as "extra" bits on matches.
func (w *huffmanBitWriter) extraBitSize() int {
total := 0
for i, n := range w.literalFreq[257:literalCount] {
total += int(n) * int(lengthExtraBits[i&31])
}
for i, n := range w.offsetFreq[:offsetCodeCount] {
total += int(n) * int(offsetExtraBits[i&31])
}
return total
}
// fixedSize returns the size of dynamically encoded data in bits.
func (w *huffmanBitWriter) fixedSize(extraBits int) int {
return 3 +
fixedLiteralEncoding.bitLength(w.literalFreq[:]) +
fixedOffsetEncoding.bitLength(w.offsetFreq[:]) +
extraBits
}
// storedSize calculates the stored size, including header.
// The function returns the size in bits and whether the block
// fits inside a single block.
func (w *huffmanBitWriter) storedSize(in []byte) (int, bool) {
if in == nil {
return 0, false
}
if len(in) <= maxStoreBlockSize {
return (len(in) + 5) * 8, true
}
return 0, false
}
func (w *huffmanBitWriter) writeCode(c hcode) {
// The function does not get inlined if we "& 63" the shift.
w.bits |= c.code64() << (w.nbits & 63)
w.nbits += c.len()
if w.nbits >= 48 {
w.writeOutBits()
}
}
// writeOutBits will write bits to the buffer.
func (w *huffmanBitWriter) writeOutBits() {
bits := w.bits
w.bits >>= 48
w.nbits -= 48
n := w.nbytes
// We over-write, but faster...
binary.LittleEndian.PutUint64(w.bytes[n:], bits)
n += 6
if n >= bufferFlushSize {
if w.err != nil {
n = 0
return
}
w.write(w.bytes[:n])
n = 0
}
w.nbytes = n
}
// Write the header of a dynamic Huffman block to the output stream.
//
// numLiterals The number of literals specified in codegen
// numOffsets The number of offsets specified in codegen
// numCodegens The number of codegens used in codegen
func (w *huffmanBitWriter) writeDynamicHeader(numLiterals int, numOffsets int, numCodegens int, isEof bool) {
if w.err != nil {
return
}
var firstBits int32 = 4
if isEof {
firstBits = 5
}
w.writeBits(firstBits, 3)
w.writeBits(int32(numLiterals-257), 5)
w.writeBits(int32(numOffsets-1), 5)
w.writeBits(int32(numCodegens-4), 4)
for i := 0; i < numCodegens; i++ {
value := uint(w.codegenEncoding.codes[codegenOrder[i]].len())
w.writeBits(int32(value), 3)
}
i := 0
for {
var codeWord = uint32(w.codegen[i])
i++
if codeWord == badCode {
break
}
w.writeCode(w.codegenEncoding.codes[codeWord])
switch codeWord {
case 16:
w.writeBits(int32(w.codegen[i]), 2)
i++
case 17:
w.writeBits(int32(w.codegen[i]), 3)
i++
case 18:
w.writeBits(int32(w.codegen[i]), 7)
i++
}
}
}
// writeStoredHeader will write a stored header.
// If the stored block is only used for EOF,
// it is replaced with a fixed huffman block.
func (w *huffmanBitWriter) writeStoredHeader(length int, isEof bool) {
if w.err != nil {
return
}
if w.lastHeader > 0 {
// We owe an EOB
w.writeCode(w.literalEncoding.codes[endBlockMarker])
w.lastHeader = 0
}
// To write EOF, use a fixed encoding block. 10 bits instead of 5 bytes.
if length == 0 && isEof {
w.writeFixedHeader(isEof)
// EOB: 7 bits, value: 0
w.writeBits(0, 7)
w.flush()
return
}
var flag int32
if isEof {
flag = 1
}
w.writeBits(flag, 3)
w.flush()
w.writeBits(int32(length), 16)
w.writeBits(int32(^uint16(length)), 16)
}
func (w *huffmanBitWriter) writeFixedHeader(isEof bool) {
if w.err != nil {
return
}
if w.lastHeader > 0 {
// We owe an EOB
w.writeCode(w.literalEncoding.codes[endBlockMarker])
w.lastHeader = 0
}
// Indicate that we are a fixed Huffman block
var value int32 = 2
if isEof {
value = 3
}
w.writeBits(value, 3)
}
// writeBlock will write a block of tokens with the smallest encoding.
// The original input can be supplied, and if the huffman encoded data
// is larger than the original bytes, the data will be written as a
// stored block.
// If the input is nil, the tokens will always be Huffman encoded.
func (w *huffmanBitWriter) writeBlock(tokens *tokens, eof bool, input []byte) {
if w.err != nil {
return
}
tokens.AddEOB()
if w.lastHeader > 0 {
// We owe an EOB
w.writeCode(w.literalEncoding.codes[endBlockMarker])
w.lastHeader = 0
}
numLiterals, numOffsets := w.indexTokens(tokens, false)
w.generate()
var extraBits int
storedSize, storable := w.storedSize(input)
if storable {
extraBits = w.extraBitSize()
}
// Figure out smallest code.
// Fixed Huffman baseline.
var literalEncoding = fixedLiteralEncoding
var offsetEncoding = fixedOffsetEncoding
var size = math.MaxInt32
if tokens.n < maxPredefinedTokens {
size = w.fixedSize(extraBits)
}
// Dynamic Huffman?
var numCodegens int
// Generate codegen and codegenFrequencies, which indicates how to encode
// the literalEncoding and the offsetEncoding.
w.generateCodegen(numLiterals, numOffsets, w.literalEncoding, w.offsetEncoding)
w.codegenEncoding.generate(w.codegenFreq[:], 7)
dynamicSize, numCodegens := w.dynamicSize(w.literalEncoding, w.offsetEncoding, extraBits)
if dynamicSize < size {
size = dynamicSize
literalEncoding = w.literalEncoding
offsetEncoding = w.offsetEncoding
}
// Stored bytes?
if storable && storedSize <= size {
w.writeStoredHeader(len(input), eof)
w.writeBytes(input)
return
}
// Huffman.
if literalEncoding == fixedLiteralEncoding {
w.writeFixedHeader(eof)
} else {
w.writeDynamicHeader(numLiterals, numOffsets, numCodegens, eof)
}
// Write the tokens.
w.writeTokens(tokens.Slice(), literalEncoding.codes, offsetEncoding.codes)
}
// writeBlockDynamic encodes a block using a dynamic Huffman table.
// This should be used if the symbols used have a disproportionate
// histogram distribution.
// If input is supplied and the compression savings are below 1/16th of the
// input size the block is stored.
func (w *huffmanBitWriter) writeBlockDynamic(tokens *tokens, eof bool, input []byte, sync bool) {
if w.err != nil {
return
}
sync = sync || eof
if sync {
tokens.AddEOB()
}
// We cannot reuse pure huffman table, and must mark as EOF.
if (w.lastHuffMan || eof) && w.lastHeader > 0 {
// We will not try to reuse.
w.writeCode(w.literalEncoding.codes[endBlockMarker])
w.lastHeader = 0
w.lastHuffMan = false
}
// fillReuse enables filling of empty values.
// This will make encodings always reusable without testing.
// However, this does not appear to benefit on most cases.
const fillReuse = false
// Check if we can reuse...
if !fillReuse && w.lastHeader > 0 && !w.canReuse(tokens) {
w.writeCode(w.literalEncoding.codes[endBlockMarker])
w.lastHeader = 0
}
numLiterals, numOffsets := w.indexTokens(tokens, !sync)
extraBits := 0
ssize, storable := w.storedSize(input)
const usePrefs = true
if storable || w.lastHeader > 0 {
extraBits = w.extraBitSize()
}
var size int
// Check if we should reuse.
if w.lastHeader > 0 {
// Estimate size for using a new table.
// Use the previous header size as the best estimate.
newSize := w.lastHeader + tokens.EstimatedBits()
newSize += int(w.literalEncoding.codes[endBlockMarker].len()) + newSize>>w.logNewTablePenalty
// The estimated size is calculated as an optimal table.
// We add a penalty to make it more realistic and re-use a bit more.
reuseSize := w.dynamicReuseSize(w.literalEncoding, w.offsetEncoding) + extraBits
// Check if a new table is better.
if newSize < reuseSize {
// Write the EOB we owe.
w.writeCode(w.literalEncoding.codes[endBlockMarker])
size = newSize
w.lastHeader = 0
} else {
size = reuseSize
}
if tokens.n < maxPredefinedTokens {
if preSize := w.fixedSize(extraBits) + 7; usePrefs && preSize < size {
// Check if we get a reasonable size decrease.
if storable && ssize <= size {
w.writeStoredHeader(len(input), eof)
w.writeBytes(input)
return
}
w.writeFixedHeader(eof)
if !sync {
tokens.AddEOB()
}
w.writeTokens(tokens.Slice(), fixedLiteralEncoding.codes, fixedOffsetEncoding.codes)
return
}
}
// Check if we get a reasonable size decrease.
if storable && ssize <= size {
w.writeStoredHeader(len(input), eof)
w.writeBytes(input)
return
}
}
// We want a new block/table
if w.lastHeader == 0 {
if fillReuse && !sync {
w.fillTokens()
numLiterals, numOffsets = maxNumLit, maxNumDist
} else {
w.literalFreq[endBlockMarker] = 1
}
w.generate()
// Generate codegen and codegenFrequencies, which indicates how to encode
// the literalEncoding and the offsetEncoding.
w.generateCodegen(numLiterals, numOffsets, w.literalEncoding, w.offsetEncoding)
w.codegenEncoding.generate(w.codegenFreq[:], 7)
var numCodegens int
if fillReuse && !sync {
// Reindex for accurate size...
w.indexTokens(tokens, true)
}
size, numCodegens = w.dynamicSize(w.literalEncoding, w.offsetEncoding, extraBits)
// Store predefined, if we don't get a reasonable improvement.
if tokens.n < maxPredefinedTokens {
if preSize := w.fixedSize(extraBits); usePrefs && preSize <= size {
// Store bytes, if we don't get an improvement.
if storable && ssize <= preSize {
w.writeStoredHeader(len(input), eof)
w.writeBytes(input)
return
}
w.writeFixedHeader(eof)
if !sync {
tokens.AddEOB()
}
w.writeTokens(tokens.Slice(), fixedLiteralEncoding.codes, fixedOffsetEncoding.codes)
return
}
}
if storable && ssize <= size {
// Store bytes, if we don't get an improvement.
w.writeStoredHeader(len(input), eof)
w.writeBytes(input)
return
}
// Write Huffman table.
w.writeDynamicHeader(numLiterals, numOffsets, numCodegens, eof)
if !sync {
w.lastHeader, _ = w.headerSize()
}
w.lastHuffMan = false
}
if sync {
w.lastHeader = 0
}
// Write the tokens.
w.writeTokens(tokens.Slice(), w.literalEncoding.codes, w.offsetEncoding.codes)
}
func (w *huffmanBitWriter) fillTokens() {
for i, v := range w.literalFreq[:literalCount] {
if v == 0 {
w.literalFreq[i] = 1
}
}
for i, v := range w.offsetFreq[:offsetCodeCount] {
if v == 0 {
w.offsetFreq[i] = 1
}
}
}
// indexTokens indexes a slice of tokens, and updates
// literalFreq and offsetFreq, and generates literalEncoding
// and offsetEncoding.
// The number of literal and offset tokens is returned.
func (w *huffmanBitWriter) indexTokens(t *tokens, filled bool) (numLiterals, numOffsets int) {
//copy(w.literalFreq[:], t.litHist[:])
*(*[256]uint16)(w.literalFreq[:]) = t.litHist
//copy(w.literalFreq[256:], t.extraHist[:])
*(*[32]uint16)(w.literalFreq[256:]) = t.extraHist
w.offsetFreq = t.offHist
if t.n == 0 {
return
}
if filled {
return maxNumLit, maxNumDist
}
// get the number of literals
numLiterals = len(w.literalFreq)
for w.literalFreq[numLiterals-1] == 0 {
numLiterals--
}
// get the number of offsets
numOffsets = len(w.offsetFreq)
for numOffsets > 0 && w.offsetFreq[numOffsets-1] == 0 {
numOffsets--
}
if numOffsets == 0 {
// We haven't found a single match. If we want to go with the dynamic encoding,
// we should count at least one offset to be sure that the offset huffman tree could be encoded.
w.offsetFreq[0] = 1
numOffsets = 1
}
return
}
func (w *huffmanBitWriter) generate() {
w.literalEncoding.generate(w.literalFreq[:literalCount], 15)
w.offsetEncoding.generate(w.offsetFreq[:offsetCodeCount], 15)
}
// writeTokens writes a slice of tokens to the output.
// codes for literal and offset encoding must be supplied.
func (w *huffmanBitWriter) writeTokens(tokens []token, leCodes, oeCodes []hcode) {
if w.err != nil {
return
}
if len(tokens) == 0 {
return
}
// Only last token should be endBlockMarker.
var deferEOB bool
if tokens[len(tokens)-1] == endBlockMarker {
tokens = tokens[:len(tokens)-1]
deferEOB = true
}
// Create slices up to the next power of two to avoid bounds checks.
lits := leCodes[:256]
offs := oeCodes[:32]
lengths := leCodes[lengthCodesStart:]
lengths = lengths[:32]
// Go 1.16 LOVES having these on stack.
bits, nbits, nbytes := w.bits, w.nbits, w.nbytes
for _, t := range tokens {
if t < 256 {
//w.writeCode(lits[t.literal()])
c := lits[t]
bits |= c.code64() << (nbits & 63)
nbits += c.len()
if nbits >= 48 {
binary.LittleEndian.PutUint64(w.bytes[nbytes:], bits)
//*(*uint64)(unsafe.Pointer(&w.bytes[nbytes])) = bits
bits >>= 48
nbits -= 48
nbytes += 6
if nbytes >= bufferFlushSize {
if w.err != nil {
nbytes = 0
return
}
_, w.err = w.writer.Write(w.bytes[:nbytes])
nbytes = 0
}
}
continue
}
// Write the length
length := t.length()
lengthCode := lengthCode(length) & 31
if false {
w.writeCode(lengths[lengthCode])
} else {
// inlined
c := lengths[lengthCode]
bits |= c.code64() << (nbits & 63)
nbits += c.len()
if nbits >= 48 {
binary.LittleEndian.PutUint64(w.bytes[nbytes:], bits)
//*(*uint64)(unsafe.Pointer(&w.bytes[nbytes])) = bits
bits >>= 48
nbits -= 48
nbytes += 6
if nbytes >= bufferFlushSize {
if w.err != nil {
nbytes = 0
return
}
_, w.err = w.writer.Write(w.bytes[:nbytes])
nbytes = 0
}
}
}
if lengthCode >= lengthExtraBitsMinCode {
extraLengthBits := lengthExtraBits[lengthCode]
//w.writeBits(extraLength, extraLengthBits)
extraLength := int32(length - lengthBase[lengthCode])
bits |= uint64(extraLength) << (nbits & 63)
nbits += extraLengthBits
if nbits >= 48 {
binary.LittleEndian.PutUint64(w.bytes[nbytes:], bits)
//*(*uint64)(unsafe.Pointer(&w.bytes[nbytes])) = bits
bits >>= 48
nbits -= 48
nbytes += 6
if nbytes >= bufferFlushSize {
if w.err != nil {
nbytes = 0
return
}
_, w.err = w.writer.Write(w.bytes[:nbytes])
nbytes = 0
}
}
}
// Write the offset
offset := t.offset()
offsetCode := (offset >> 16) & 31
if false {
w.writeCode(offs[offsetCode])
} else {
// inlined
c := offs[offsetCode]
bits |= c.code64() << (nbits & 63)
nbits += c.len()
if nbits >= 48 {
binary.LittleEndian.PutUint64(w.bytes[nbytes:], bits)
//*(*uint64)(unsafe.Pointer(&w.bytes[nbytes])) = bits
bits >>= 48
nbits -= 48
nbytes += 6
if nbytes >= bufferFlushSize {
if w.err != nil {
nbytes = 0
return
}
_, w.err = w.writer.Write(w.bytes[:nbytes])
nbytes = 0
}
}
}
if offsetCode >= offsetExtraBitsMinCode {
offsetComb := offsetCombined[offsetCode]
//w.writeBits(extraOffset, extraOffsetBits)
bits |= uint64((offset-(offsetComb>>8))&matchOffsetOnlyMask) << (nbits & 63)
nbits += uint8(offsetComb)
if nbits >= 48 {
binary.LittleEndian.PutUint64(w.bytes[nbytes:], bits)
//*(*uint64)(unsafe.Pointer(&w.bytes[nbytes])) = bits
bits >>= 48
nbits -= 48
nbytes += 6
if nbytes >= bufferFlushSize {
if w.err != nil {
nbytes = 0
return
}
_, w.err = w.writer.Write(w.bytes[:nbytes])
nbytes = 0
}
}
}
}
// Restore...
w.bits, w.nbits, w.nbytes = bits, nbits, nbytes
if deferEOB {
w.writeCode(leCodes[endBlockMarker])
}
}
// huffOffset is a static offset encoder used for huffman only encoding.
// It can be reused since we will not be encoding offset values.
var huffOffset *huffmanEncoder
func init() {
w := newHuffmanBitWriter(nil)
w.offsetFreq[0] = 1
huffOffset = newHuffmanEncoder(offsetCodeCount)
huffOffset.generate(w.offsetFreq[:offsetCodeCount], 15)
}
// writeBlockHuff encodes a block of bytes as either
// Huffman encoded literals or uncompressed bytes if the
// results only gains very little from compression.
func (w *huffmanBitWriter) writeBlockHuff(eof bool, input []byte, sync bool) {
if w.err != nil {
return
}
// Clear histogram
for i := range w.literalFreq[:] {
w.literalFreq[i] = 0
}
if !w.lastHuffMan {
for i := range w.offsetFreq[:] {
w.offsetFreq[i] = 0
}
}
const numLiterals = endBlockMarker + 1
const numOffsets = 1
// Add everything as literals
// We have to estimate the header size.
// Assume header is around 70 bytes:
// https://stackoverflow.com/a/25454430
const guessHeaderSizeBits = 70 * 8
histogram(input, w.literalFreq[:numLiterals])
ssize, storable := w.storedSize(input)
if storable && len(input) > 1024 {
// Quick check for incompressible content.
abs := float64(0)
avg := float64(len(input)) / 256
max := float64(len(input) * 2)
for _, v := range w.literalFreq[:256] {
diff := float64(v) - avg
abs += diff * diff
if abs > max {
break
}
}
if abs < max {
if debugDeflate {
fmt.Println("stored", abs, "<", max)
}
// No chance we can compress this...
w.writeStoredHeader(len(input), eof)
w.writeBytes(input)
return
}
}
w.literalFreq[endBlockMarker] = 1
w.tmpLitEncoding.generate(w.literalFreq[:numLiterals], 15)
estBits := w.tmpLitEncoding.canReuseBits(w.literalFreq[:numLiterals])
if estBits < math.MaxInt32 {
estBits += w.lastHeader
if w.lastHeader == 0 {
estBits += guessHeaderSizeBits
}
estBits += estBits >> w.logNewTablePenalty
}
// Store bytes, if we don't get a reasonable improvement.
if storable && ssize <= estBits {
if debugDeflate {
fmt.Println("stored,", ssize, "<=", estBits)
}
w.writeStoredHeader(len(input), eof)
w.writeBytes(input)
return
}
if w.lastHeader > 0 {
reuseSize := w.literalEncoding.canReuseBits(w.literalFreq[:256])
if estBits < reuseSize {
if debugDeflate {
fmt.Println("NOT reusing, reuse:", reuseSize/8, "> new:", estBits/8, "header est:", w.lastHeader/8, "bytes")
}
// We owe an EOB
w.writeCode(w.literalEncoding.codes[endBlockMarker])
w.lastHeader = 0
} else if debugDeflate {
fmt.Println("reusing, reuse:", reuseSize/8, "> new:", estBits/8, "- header est:", w.lastHeader/8)
}
}
count := 0
if w.lastHeader == 0 {
// Use the temp encoding, so swap.
w.literalEncoding, w.tmpLitEncoding = w.tmpLitEncoding, w.literalEncoding
// Generate codegen and codegenFrequencies, which indicates how to encode
// the literalEncoding and the offsetEncoding.
w.generateCodegen(numLiterals, numOffsets, w.literalEncoding, huffOffset)
w.codegenEncoding.generate(w.codegenFreq[:], 7)
numCodegens := w.codegens()
// Huffman.
w.writeDynamicHeader(numLiterals, numOffsets, numCodegens, eof)
w.lastHuffMan = true
w.lastHeader, _ = w.headerSize()
if debugDeflate {
count += w.lastHeader
fmt.Println("header:", count/8)
}
}
encoding := w.literalEncoding.codes[:256]
// Go 1.16 LOVES having these on stack. At least 1.5x the speed.
bits, nbits, nbytes := w.bits, w.nbits, w.nbytes
if debugDeflate {
count -= int(nbytes)*8 + int(nbits)
}
// Unroll, write 3 codes/loop.
// Fastest number of unrolls.
for len(input) > 3 {
// We must have at least 48 bits free.
if nbits >= 8 {
n := nbits >> 3
binary.LittleEndian.PutUint64(w.bytes[nbytes:], bits)
bits >>= (n * 8) & 63
nbits -= n * 8
nbytes += n
}
if nbytes >= bufferFlushSize {
if w.err != nil {
nbytes = 0
return
}
if debugDeflate {
count += int(nbytes) * 8
}
_, w.err = w.writer.Write(w.bytes[:nbytes])
nbytes = 0
}
a, b := encoding[input[0]], encoding[input[1]]
bits |= a.code64() << (nbits & 63)
bits |= b.code64() << ((nbits + a.len()) & 63)
c := encoding[input[2]]
nbits += b.len() + a.len()
bits |= c.code64() << (nbits & 63)
nbits += c.len()
input = input[3:]
}
// Remaining...
for _, t := range input {
if nbits >= 48 {
binary.LittleEndian.PutUint64(w.bytes[nbytes:], bits)
//*(*uint64)(unsafe.Pointer(&w.bytes[nbytes])) = bits
bits >>= 48
nbits -= 48
nbytes += 6
if nbytes >= bufferFlushSize {
if w.err != nil {
nbytes = 0
return
}
if debugDeflate {
count += int(nbytes) * 8
}
_, w.err = w.writer.Write(w.bytes[:nbytes])
nbytes = 0
}
}
// Bitwriting inlined, ~30% speedup
c := encoding[t]
bits |= c.code64() << (nbits & 63)
nbits += c.len()
if debugDeflate {
count += int(c.len())
}
}
// Restore...
w.bits, w.nbits, w.nbytes = bits, nbits, nbytes
if debugDeflate {
nb := count + int(nbytes)*8 + int(nbits)
fmt.Println("wrote", nb, "bits,", nb/8, "bytes.")
}
// Flush if needed to have space.
if w.nbits >= 48 {
w.writeOutBits()
}
if eof || sync {
w.writeCode(w.literalEncoding.codes[endBlockMarker])
w.lastHeader = 0
w.lastHuffMan = false
}
}