gotosocial/vendor/github.com/klauspost/compress/s2/decode_arm64.s
Dominik Süß 9d0df426da
[feature] S3 support (#674)
* feat: vendor minio client

* feat: introduce storage package with s3 support

* feat: serve s3 files directly

this saves a lot of bandwith as the files are fetched from the object
store directly

* fix: use explicit local storage in tests

* feat: integrate s3 storage with the main server

* fix: add s3 config to cli tests

* docs: explicitly set values in example config

also adds license header to the storage package

* fix: use better http status code on s3 redirect

HTTP 302 Found is the best fit, as it signifies that the resource
requested was found but not under its presumed URL

307/TemporaryRedirect would mean that this resource is usually located
here, not in this case

303/SeeOther indicates that the redirection does not link to the
requested resource but to another page

* refactor: use context in storage driver interface
2022-07-03 12:08:30 +02:00

574 lines
15 KiB
ArmAsm

// Copyright 2020 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.
// +build !appengine
// +build gc
// +build !noasm
#include "textflag.h"
#define R_TMP0 R2
#define R_TMP1 R3
#define R_LEN R4
#define R_OFF R5
#define R_SRC R6
#define R_DST R7
#define R_DBASE R8
#define R_DLEN R9
#define R_DEND R10
#define R_SBASE R11
#define R_SLEN R12
#define R_SEND R13
#define R_TMP2 R14
#define R_TMP3 R15
// TEST_SRC will check if R_SRC is <= SRC_END
#define TEST_SRC() \
CMP R_SEND, R_SRC \
BGT errCorrupt
// MOVD R_SRC, R_TMP1
// SUB R_SBASE, R_TMP1, R_TMP1
// CMP R_SLEN, R_TMP1
// BGT errCorrupt
// The asm code generally follows the pure Go code in decode_other.go, except
// where marked with a "!!!".
// func decode(dst, src []byte) int
//
// All local variables fit into registers. The non-zero stack size is only to
// spill registers and push args when issuing a CALL. The register allocation:
// - R_TMP0 scratch
// - R_TMP1 scratch
// - R_LEN length or x
// - R_OFF offset
// - R_SRC &src[s]
// - R_DST &dst[d]
// + R_DBASE dst_base
// + R_DLEN dst_len
// + R_DEND dst_base + dst_len
// + R_SBASE src_base
// + R_SLEN src_len
// + R_SEND src_base + src_len
// - R_TMP2 used by doCopy
// - R_TMP3 used by doCopy
//
// The registers R_DBASE-R_SEND (marked with a "+") are set at the start of the
// function, and after a CALL returns, and are not otherwise modified.
//
// The d variable is implicitly R_DST - R_DBASE, and len(dst)-d is R_DEND - R_DST.
// The s variable is implicitly R_SRC - R_SBASE, and len(src)-s is R_SEND - R_SRC.
TEXT ·s2Decode(SB), NOSPLIT, $56-64
// Initialize R_SRC, R_DST and R_DBASE-R_SEND.
MOVD dst_base+0(FP), R_DBASE
MOVD dst_len+8(FP), R_DLEN
MOVD R_DBASE, R_DST
MOVD R_DBASE, R_DEND
ADD R_DLEN, R_DEND, R_DEND
MOVD src_base+24(FP), R_SBASE
MOVD src_len+32(FP), R_SLEN
MOVD R_SBASE, R_SRC
MOVD R_SBASE, R_SEND
ADD R_SLEN, R_SEND, R_SEND
MOVD $0, R_OFF
loop:
// for s < len(src)
CMP R_SEND, R_SRC
BEQ end
// R_LEN = uint32(src[s])
//
// switch src[s] & 0x03
MOVBU (R_SRC), R_LEN
MOVW R_LEN, R_TMP1
ANDW $3, R_TMP1
MOVW $1, R1
CMPW R1, R_TMP1
BGE tagCopy
// ----------------------------------------
// The code below handles literal tags.
// case tagLiteral:
// x := uint32(src[s] >> 2)
// switch
MOVW $60, R1
LSRW $2, R_LEN, R_LEN
CMPW R_LEN, R1
BLS tagLit60Plus
// case x < 60:
// s++
ADD $1, R_SRC, R_SRC
doLit:
// This is the end of the inner "switch", when we have a literal tag.
//
// We assume that R_LEN == x and x fits in a uint32, where x is the variable
// used in the pure Go decode_other.go code.
// length = int(x) + 1
//
// Unlike the pure Go code, we don't need to check if length <= 0 because
// R_LEN can hold 64 bits, so the increment cannot overflow.
ADD $1, R_LEN, R_LEN
// Prepare to check if copying length bytes will run past the end of dst or
// src.
//
// R_TMP0 = len(dst) - d
// R_TMP1 = len(src) - s
MOVD R_DEND, R_TMP0
SUB R_DST, R_TMP0, R_TMP0
MOVD R_SEND, R_TMP1
SUB R_SRC, R_TMP1, R_TMP1
// !!! Try a faster technique for short (16 or fewer bytes) copies.
//
// if length > 16 || len(dst)-d < 16 || len(src)-s < 16 {
// goto callMemmove // Fall back on calling runtime·memmove.
// }
//
// The C++ snappy code calls this TryFastAppend. It also checks len(src)-s
// against 21 instead of 16, because it cannot assume that all of its input
// is contiguous in memory and so it needs to leave enough source bytes to
// read the next tag without refilling buffers, but Go's Decode assumes
// contiguousness (the src argument is a []byte).
CMP $16, R_LEN
BGT callMemmove
CMP $16, R_TMP0
BLT callMemmove
CMP $16, R_TMP1
BLT callMemmove
// !!! Implement the copy from src to dst as a 16-byte load and store.
// (Decode's documentation says that dst and src must not overlap.)
//
// This always copies 16 bytes, instead of only length bytes, but that's
// OK. If the input is a valid Snappy encoding then subsequent iterations
// will fix up the overrun. Otherwise, Decode returns a nil []byte (and a
// non-nil error), so the overrun will be ignored.
//
// Note that on arm64, it is legal and cheap to issue unaligned 8-byte or
// 16-byte loads and stores. This technique probably wouldn't be as
// effective on architectures that are fussier about alignment.
LDP 0(R_SRC), (R_TMP2, R_TMP3)
STP (R_TMP2, R_TMP3), 0(R_DST)
// d += length
// s += length
ADD R_LEN, R_DST, R_DST
ADD R_LEN, R_SRC, R_SRC
B loop
callMemmove:
// if length > len(dst)-d || length > len(src)-s { etc }
CMP R_TMP0, R_LEN
BGT errCorrupt
CMP R_TMP1, R_LEN
BGT errCorrupt
// copy(dst[d:], src[s:s+length])
//
// This means calling runtime·memmove(&dst[d], &src[s], length), so we push
// R_DST, R_SRC and R_LEN as arguments. Coincidentally, we also need to spill those
// three registers to the stack, to save local variables across the CALL.
MOVD R_DST, 8(RSP)
MOVD R_SRC, 16(RSP)
MOVD R_LEN, 24(RSP)
MOVD R_DST, 32(RSP)
MOVD R_SRC, 40(RSP)
MOVD R_LEN, 48(RSP)
MOVD R_OFF, 56(RSP)
CALL runtime·memmove(SB)
// Restore local variables: unspill registers from the stack and
// re-calculate R_DBASE-R_SEND.
MOVD 32(RSP), R_DST
MOVD 40(RSP), R_SRC
MOVD 48(RSP), R_LEN
MOVD 56(RSP), R_OFF
MOVD dst_base+0(FP), R_DBASE
MOVD dst_len+8(FP), R_DLEN
MOVD R_DBASE, R_DEND
ADD R_DLEN, R_DEND, R_DEND
MOVD src_base+24(FP), R_SBASE
MOVD src_len+32(FP), R_SLEN
MOVD R_SBASE, R_SEND
ADD R_SLEN, R_SEND, R_SEND
// d += length
// s += length
ADD R_LEN, R_DST, R_DST
ADD R_LEN, R_SRC, R_SRC
B loop
tagLit60Plus:
// !!! This fragment does the
//
// s += x - 58; if uint(s) > uint(len(src)) { etc }
//
// checks. In the asm version, we code it once instead of once per switch case.
ADD R_LEN, R_SRC, R_SRC
SUB $58, R_SRC, R_SRC
TEST_SRC()
// case x == 60:
MOVW $61, R1
CMPW R1, R_LEN
BEQ tagLit61
BGT tagLit62Plus
// x = uint32(src[s-1])
MOVBU -1(R_SRC), R_LEN
B doLit
tagLit61:
// case x == 61:
// x = uint32(src[s-2]) | uint32(src[s-1])<<8
MOVHU -2(R_SRC), R_LEN
B doLit
tagLit62Plus:
CMPW $62, R_LEN
BHI tagLit63
// case x == 62:
// x = uint32(src[s-3]) | uint32(src[s-2])<<8 | uint32(src[s-1])<<16
MOVHU -3(R_SRC), R_LEN
MOVBU -1(R_SRC), R_TMP1
ORR R_TMP1<<16, R_LEN
B doLit
tagLit63:
// case x == 63:
// x = uint32(src[s-4]) | uint32(src[s-3])<<8 | uint32(src[s-2])<<16 | uint32(src[s-1])<<24
MOVWU -4(R_SRC), R_LEN
B doLit
// The code above handles literal tags.
// ----------------------------------------
// The code below handles copy tags.
tagCopy4:
// case tagCopy4:
// s += 5
ADD $5, R_SRC, R_SRC
// if uint(s) > uint(len(src)) { etc }
MOVD R_SRC, R_TMP1
SUB R_SBASE, R_TMP1, R_TMP1
CMP R_SLEN, R_TMP1
BGT errCorrupt
// length = 1 + int(src[s-5])>>2
MOVD $1, R1
ADD R_LEN>>2, R1, R_LEN
// offset = int(uint32(src[s-4]) | uint32(src[s-3])<<8 | uint32(src[s-2])<<16 | uint32(src[s-1])<<24)
MOVWU -4(R_SRC), R_OFF
B doCopy
tagCopy2:
// case tagCopy2:
// s += 3
ADD $3, R_SRC, R_SRC
// if uint(s) > uint(len(src)) { etc }
TEST_SRC()
// length = 1 + int(src[s-3])>>2
MOVD $1, R1
ADD R_LEN>>2, R1, R_LEN
// offset = int(uint32(src[s-2]) | uint32(src[s-1])<<8)
MOVHU -2(R_SRC), R_OFF
B doCopy
tagCopy:
// We have a copy tag. We assume that:
// - R_TMP1 == src[s] & 0x03
// - R_LEN == src[s]
CMP $2, R_TMP1
BEQ tagCopy2
BGT tagCopy4
// case tagCopy1:
// s += 2
ADD $2, R_SRC, R_SRC
// if uint(s) > uint(len(src)) { etc }
TEST_SRC()
// offset = int(uint32(src[s-2])&0xe0<<3 | uint32(src[s-1]))
// Calculate offset in R_TMP0 in case it is a repeat.
MOVD R_LEN, R_TMP0
AND $0xe0, R_TMP0
MOVBU -1(R_SRC), R_TMP1
ORR R_TMP0<<3, R_TMP1, R_TMP0
// length = 4 + int(src[s-2])>>2&0x7
MOVD $7, R1
AND R_LEN>>2, R1, R_LEN
ADD $4, R_LEN, R_LEN
// check if repeat code with offset 0.
CMP $0, R_TMP0
BEQ repeatCode
// This is a regular copy, transfer our temporary value to R_OFF (offset)
MOVD R_TMP0, R_OFF
B doCopy
// This is a repeat code.
repeatCode:
// If length < 9, reuse last offset, with the length already calculated.
CMP $9, R_LEN
BLT doCopyRepeat
BEQ repeatLen1
CMP $10, R_LEN
BEQ repeatLen2
repeatLen3:
// s +=3
ADD $3, R_SRC, R_SRC
// if uint(s) > uint(len(src)) { etc }
TEST_SRC()
// length = uint32(src[s-3]) | (uint32(src[s-2])<<8) | (uint32(src[s-1])<<16) + 65540
MOVBU -1(R_SRC), R_TMP0
MOVHU -3(R_SRC), R_LEN
ORR R_TMP0<<16, R_LEN, R_LEN
ADD $65540, R_LEN, R_LEN
B doCopyRepeat
repeatLen2:
// s +=2
ADD $2, R_SRC, R_SRC
// if uint(s) > uint(len(src)) { etc }
TEST_SRC()
// length = uint32(src[s-2]) | (uint32(src[s-1])<<8) + 260
MOVHU -2(R_SRC), R_LEN
ADD $260, R_LEN, R_LEN
B doCopyRepeat
repeatLen1:
// s +=1
ADD $1, R_SRC, R_SRC
// if uint(s) > uint(len(src)) { etc }
TEST_SRC()
// length = src[s-1] + 8
MOVBU -1(R_SRC), R_LEN
ADD $8, R_LEN, R_LEN
B doCopyRepeat
doCopy:
// This is the end of the outer "switch", when we have a copy tag.
//
// We assume that:
// - R_LEN == length && R_LEN > 0
// - R_OFF == offset
// if d < offset { etc }
MOVD R_DST, R_TMP1
SUB R_DBASE, R_TMP1, R_TMP1
CMP R_OFF, R_TMP1
BLT errCorrupt
// Repeat values can skip the test above, since any offset > 0 will be in dst.
doCopyRepeat:
// if offset <= 0 { etc }
CMP $0, R_OFF
BLE errCorrupt
// if length > len(dst)-d { etc }
MOVD R_DEND, R_TMP1
SUB R_DST, R_TMP1, R_TMP1
CMP R_TMP1, R_LEN
BGT errCorrupt
// forwardCopy(dst[d:d+length], dst[d-offset:]); d += length
//
// Set:
// - R_TMP2 = len(dst)-d
// - R_TMP3 = &dst[d-offset]
MOVD R_DEND, R_TMP2
SUB R_DST, R_TMP2, R_TMP2
MOVD R_DST, R_TMP3
SUB R_OFF, R_TMP3, R_TMP3
// !!! Try a faster technique for short (16 or fewer bytes) forward copies.
//
// First, try using two 8-byte load/stores, similar to the doLit technique
// above. Even if dst[d:d+length] and dst[d-offset:] can overlap, this is
// still OK if offset >= 8. Note that this has to be two 8-byte load/stores
// and not one 16-byte load/store, and the first store has to be before the
// second load, due to the overlap if offset is in the range [8, 16).
//
// if length > 16 || offset < 8 || len(dst)-d < 16 {
// goto slowForwardCopy
// }
// copy 16 bytes
// d += length
CMP $16, R_LEN
BGT slowForwardCopy
CMP $8, R_OFF
BLT slowForwardCopy
CMP $16, R_TMP2
BLT slowForwardCopy
MOVD 0(R_TMP3), R_TMP0
MOVD R_TMP0, 0(R_DST)
MOVD 8(R_TMP3), R_TMP1
MOVD R_TMP1, 8(R_DST)
ADD R_LEN, R_DST, R_DST
B loop
slowForwardCopy:
// !!! If the forward copy is longer than 16 bytes, or if offset < 8, we
// can still try 8-byte load stores, provided we can overrun up to 10 extra
// bytes. As above, the overrun will be fixed up by subsequent iterations
// of the outermost loop.
//
// The C++ snappy code calls this technique IncrementalCopyFastPath. Its
// commentary says:
//
// ----
//
// The main part of this loop is a simple copy of eight bytes at a time
// until we've copied (at least) the requested amount of bytes. However,
// if d and d-offset are less than eight bytes apart (indicating a
// repeating pattern of length < 8), we first need to expand the pattern in
// order to get the correct results. For instance, if the buffer looks like
// this, with the eight-byte <d-offset> and <d> patterns marked as
// intervals:
//
// abxxxxxxxxxxxx
// [------] d-offset
// [------] d
//
// a single eight-byte copy from <d-offset> to <d> will repeat the pattern
// once, after which we can move <d> two bytes without moving <d-offset>:
//
// ababxxxxxxxxxx
// [------] d-offset
// [------] d
//
// and repeat the exercise until the two no longer overlap.
//
// This allows us to do very well in the special case of one single byte
// repeated many times, without taking a big hit for more general cases.
//
// The worst case of extra writing past the end of the match occurs when
// offset == 1 and length == 1; the last copy will read from byte positions
// [0..7] and write to [4..11], whereas it was only supposed to write to
// position 1. Thus, ten excess bytes.
//
// ----
//
// That "10 byte overrun" worst case is confirmed by Go's
// TestSlowForwardCopyOverrun, which also tests the fixUpSlowForwardCopy
// and finishSlowForwardCopy algorithm.
//
// if length > len(dst)-d-10 {
// goto verySlowForwardCopy
// }
SUB $10, R_TMP2, R_TMP2
CMP R_TMP2, R_LEN
BGT verySlowForwardCopy
// We want to keep the offset, so we use R_TMP2 from here.
MOVD R_OFF, R_TMP2
makeOffsetAtLeast8:
// !!! As above, expand the pattern so that offset >= 8 and we can use
// 8-byte load/stores.
//
// for offset < 8 {
// copy 8 bytes from dst[d-offset:] to dst[d:]
// length -= offset
// d += offset
// offset += offset
// // The two previous lines together means that d-offset, and therefore
// // R_TMP3, is unchanged.
// }
CMP $8, R_TMP2
BGE fixUpSlowForwardCopy
MOVD (R_TMP3), R_TMP1
MOVD R_TMP1, (R_DST)
SUB R_TMP2, R_LEN, R_LEN
ADD R_TMP2, R_DST, R_DST
ADD R_TMP2, R_TMP2, R_TMP2
B makeOffsetAtLeast8
fixUpSlowForwardCopy:
// !!! Add length (which might be negative now) to d (implied by R_DST being
// &dst[d]) so that d ends up at the right place when we jump back to the
// top of the loop. Before we do that, though, we save R_DST to R_TMP0 so that, if
// length is positive, copying the remaining length bytes will write to the
// right place.
MOVD R_DST, R_TMP0
ADD R_LEN, R_DST, R_DST
finishSlowForwardCopy:
// !!! Repeat 8-byte load/stores until length <= 0. Ending with a negative
// length means that we overrun, but as above, that will be fixed up by
// subsequent iterations of the outermost loop.
MOVD $0, R1
CMP R1, R_LEN
BLE loop
MOVD (R_TMP3), R_TMP1
MOVD R_TMP1, (R_TMP0)
ADD $8, R_TMP3, R_TMP3
ADD $8, R_TMP0, R_TMP0
SUB $8, R_LEN, R_LEN
B finishSlowForwardCopy
verySlowForwardCopy:
// verySlowForwardCopy is a simple implementation of forward copy. In C
// parlance, this is a do/while loop instead of a while loop, since we know
// that length > 0. In Go syntax:
//
// for {
// dst[d] = dst[d - offset]
// d++
// length--
// if length == 0 {
// break
// }
// }
MOVB (R_TMP3), R_TMP1
MOVB R_TMP1, (R_DST)
ADD $1, R_TMP3, R_TMP3
ADD $1, R_DST, R_DST
SUB $1, R_LEN, R_LEN
CBNZ R_LEN, verySlowForwardCopy
B loop
// The code above handles copy tags.
// ----------------------------------------
end:
// This is the end of the "for s < len(src)".
//
// if d != len(dst) { etc }
CMP R_DEND, R_DST
BNE errCorrupt
// return 0
MOVD $0, ret+48(FP)
RET
errCorrupt:
// return decodeErrCodeCorrupt
MOVD $1, R_TMP0
MOVD R_TMP0, ret+48(FP)
RET