gotosocial/vendor/go.opentelemetry.io/otel/metric/instrument.go
Daenney 14ef098099
[feature] Support OTLP HTTP, drop Jaeger (#2184)
* [feature] Add http trace exporter, drop Jaeger

Jaeger supports ingesting traces using the OpenTelemetry gRPC or HTTP
methods. The Jaeger project has deprecated the old jaeger transport.

* Add support for submitting traces over HTTP
* Drop support for the old Jaeger protocol
* Upgrade the trace libraries to v1.17

Fixes: #2176
Fixes: #2179
2023-09-07 13:20:37 +02:00

334 lines
9.4 KiB
Go

// Copyright The OpenTelemetry Authors
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package metric // import "go.opentelemetry.io/otel/metric"
import "go.opentelemetry.io/otel/attribute"
// Observable is used as a grouping mechanism for all instruments that are
// updated within a Callback.
type Observable interface {
observable()
}
// InstrumentOption applies options to all instruments.
type InstrumentOption interface {
Int64CounterOption
Int64UpDownCounterOption
Int64HistogramOption
Int64ObservableCounterOption
Int64ObservableUpDownCounterOption
Int64ObservableGaugeOption
Float64CounterOption
Float64UpDownCounterOption
Float64HistogramOption
Float64ObservableCounterOption
Float64ObservableUpDownCounterOption
Float64ObservableGaugeOption
}
type descOpt string
func (o descOpt) applyFloat64Counter(c Float64CounterConfig) Float64CounterConfig {
c.description = string(o)
return c
}
func (o descOpt) applyFloat64UpDownCounter(c Float64UpDownCounterConfig) Float64UpDownCounterConfig {
c.description = string(o)
return c
}
func (o descOpt) applyFloat64Histogram(c Float64HistogramConfig) Float64HistogramConfig {
c.description = string(o)
return c
}
func (o descOpt) applyFloat64ObservableCounter(c Float64ObservableCounterConfig) Float64ObservableCounterConfig {
c.description = string(o)
return c
}
func (o descOpt) applyFloat64ObservableUpDownCounter(c Float64ObservableUpDownCounterConfig) Float64ObservableUpDownCounterConfig {
c.description = string(o)
return c
}
func (o descOpt) applyFloat64ObservableGauge(c Float64ObservableGaugeConfig) Float64ObservableGaugeConfig {
c.description = string(o)
return c
}
func (o descOpt) applyInt64Counter(c Int64CounterConfig) Int64CounterConfig {
c.description = string(o)
return c
}
func (o descOpt) applyInt64UpDownCounter(c Int64UpDownCounterConfig) Int64UpDownCounterConfig {
c.description = string(o)
return c
}
func (o descOpt) applyInt64Histogram(c Int64HistogramConfig) Int64HistogramConfig {
c.description = string(o)
return c
}
func (o descOpt) applyInt64ObservableCounter(c Int64ObservableCounterConfig) Int64ObservableCounterConfig {
c.description = string(o)
return c
}
func (o descOpt) applyInt64ObservableUpDownCounter(c Int64ObservableUpDownCounterConfig) Int64ObservableUpDownCounterConfig {
c.description = string(o)
return c
}
func (o descOpt) applyInt64ObservableGauge(c Int64ObservableGaugeConfig) Int64ObservableGaugeConfig {
c.description = string(o)
return c
}
// WithDescription sets the instrument description.
func WithDescription(desc string) InstrumentOption { return descOpt(desc) }
type unitOpt string
func (o unitOpt) applyFloat64Counter(c Float64CounterConfig) Float64CounterConfig {
c.unit = string(o)
return c
}
func (o unitOpt) applyFloat64UpDownCounter(c Float64UpDownCounterConfig) Float64UpDownCounterConfig {
c.unit = string(o)
return c
}
func (o unitOpt) applyFloat64Histogram(c Float64HistogramConfig) Float64HistogramConfig {
c.unit = string(o)
return c
}
func (o unitOpt) applyFloat64ObservableCounter(c Float64ObservableCounterConfig) Float64ObservableCounterConfig {
c.unit = string(o)
return c
}
func (o unitOpt) applyFloat64ObservableUpDownCounter(c Float64ObservableUpDownCounterConfig) Float64ObservableUpDownCounterConfig {
c.unit = string(o)
return c
}
func (o unitOpt) applyFloat64ObservableGauge(c Float64ObservableGaugeConfig) Float64ObservableGaugeConfig {
c.unit = string(o)
return c
}
func (o unitOpt) applyInt64Counter(c Int64CounterConfig) Int64CounterConfig {
c.unit = string(o)
return c
}
func (o unitOpt) applyInt64UpDownCounter(c Int64UpDownCounterConfig) Int64UpDownCounterConfig {
c.unit = string(o)
return c
}
func (o unitOpt) applyInt64Histogram(c Int64HistogramConfig) Int64HistogramConfig {
c.unit = string(o)
return c
}
func (o unitOpt) applyInt64ObservableCounter(c Int64ObservableCounterConfig) Int64ObservableCounterConfig {
c.unit = string(o)
return c
}
func (o unitOpt) applyInt64ObservableUpDownCounter(c Int64ObservableUpDownCounterConfig) Int64ObservableUpDownCounterConfig {
c.unit = string(o)
return c
}
func (o unitOpt) applyInt64ObservableGauge(c Int64ObservableGaugeConfig) Int64ObservableGaugeConfig {
c.unit = string(o)
return c
}
// WithUnit sets the instrument unit.
//
// The unit u should be defined using the appropriate [UCUM](https://ucum.org) case-sensitive code.
func WithUnit(u string) InstrumentOption { return unitOpt(u) }
// AddOption applies options to an addition measurement. See
// [MeasurementOption] for other options that can be used as an AddOption.
type AddOption interface {
applyAdd(AddConfig) AddConfig
}
// AddConfig contains options for an addition measurement.
type AddConfig struct {
attrs attribute.Set
}
// NewAddConfig returns a new [AddConfig] with all opts applied.
func NewAddConfig(opts []AddOption) AddConfig {
config := AddConfig{attrs: *attribute.EmptySet()}
for _, o := range opts {
config = o.applyAdd(config)
}
return config
}
// Attributes returns the configured attribute set.
func (c AddConfig) Attributes() attribute.Set {
return c.attrs
}
// RecordOption applies options to an addition measurement. See
// [MeasurementOption] for other options that can be used as a RecordOption.
type RecordOption interface {
applyRecord(RecordConfig) RecordConfig
}
// RecordConfig contains options for a recorded measurement.
type RecordConfig struct {
attrs attribute.Set
}
// NewRecordConfig returns a new [RecordConfig] with all opts applied.
func NewRecordConfig(opts []RecordOption) RecordConfig {
config := RecordConfig{attrs: *attribute.EmptySet()}
for _, o := range opts {
config = o.applyRecord(config)
}
return config
}
// Attributes returns the configured attribute set.
func (c RecordConfig) Attributes() attribute.Set {
return c.attrs
}
// ObserveOption applies options to an addition measurement. See
// [MeasurementOption] for other options that can be used as a ObserveOption.
type ObserveOption interface {
applyObserve(ObserveConfig) ObserveConfig
}
// ObserveConfig contains options for an observed measurement.
type ObserveConfig struct {
attrs attribute.Set
}
// NewObserveConfig returns a new [ObserveConfig] with all opts applied.
func NewObserveConfig(opts []ObserveOption) ObserveConfig {
config := ObserveConfig{attrs: *attribute.EmptySet()}
for _, o := range opts {
config = o.applyObserve(config)
}
return config
}
// Attributes returns the configured attribute set.
func (c ObserveConfig) Attributes() attribute.Set {
return c.attrs
}
// MeasurementOption applies options to all instrument measurement.
type MeasurementOption interface {
AddOption
RecordOption
ObserveOption
}
type attrOpt struct {
set attribute.Set
}
// mergeSets returns the union of keys between a and b. Any duplicate keys will
// use the value associated with b.
func mergeSets(a, b attribute.Set) attribute.Set {
// NewMergeIterator uses the first value for any duplicates.
iter := attribute.NewMergeIterator(&b, &a)
merged := make([]attribute.KeyValue, 0, a.Len()+b.Len())
for iter.Next() {
merged = append(merged, iter.Attribute())
}
return attribute.NewSet(merged...)
}
func (o attrOpt) applyAdd(c AddConfig) AddConfig {
switch {
case o.set.Len() == 0:
case c.attrs.Len() == 0:
c.attrs = o.set
default:
c.attrs = mergeSets(c.attrs, o.set)
}
return c
}
func (o attrOpt) applyRecord(c RecordConfig) RecordConfig {
switch {
case o.set.Len() == 0:
case c.attrs.Len() == 0:
c.attrs = o.set
default:
c.attrs = mergeSets(c.attrs, o.set)
}
return c
}
func (o attrOpt) applyObserve(c ObserveConfig) ObserveConfig {
switch {
case o.set.Len() == 0:
case c.attrs.Len() == 0:
c.attrs = o.set
default:
c.attrs = mergeSets(c.attrs, o.set)
}
return c
}
// WithAttributeSet sets the attribute Set associated with a measurement is
// made with.
//
// If multiple WithAttributeSet or WithAttributes options are passed the
// attributes will be merged together in the order they are passed. Attributes
// with duplicate keys will use the last value passed.
func WithAttributeSet(attributes attribute.Set) MeasurementOption {
return attrOpt{set: attributes}
}
// WithAttributes converts attributes into an attribute Set and sets the Set to
// be associated with a measurement. This is shorthand for:
//
// cp := make([]attribute.KeyValue, len(attributes))
// copy(cp, attributes)
// WithAttributes(attribute.NewSet(cp...))
//
// [attribute.NewSet] may modify the passed attributes so this will make a copy
// of attributes before creating a set in order to ensure this function is
// concurrent safe. This makes this option function less optimized in
// comparison to [WithAttributeSet]. Therefore, [WithAttributeSet] should be
// preferred for performance sensitive code.
//
// See [WithAttributeSet] for information about how multiple WithAttributes are
// merged.
func WithAttributes(attributes ...attribute.KeyValue) MeasurementOption {
cp := make([]attribute.KeyValue, len(attributes))
copy(cp, attributes)
return attrOpt{set: attribute.NewSet(cp...)}
}