* Use email_address table to check user's email when login with email adress
* Update services/auth/signin.go
* Fix test
* Fix test
* Fix logging in with ldap username != loginname
* Fix if user does not exist yet
* Make more clear this is loginName
* Fix formatting
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Johan Van de Wauw <johan@gisky.be>
Co-authored-by: zeripath <art27@cantab.net>
Backport #18447
* Ensure git tag tests and other create test repos in tmpdir
There are a few places where tests appear to reuse testing repos which
causes random CI failures.
This PR simply changes these tests to ensure that cloning always happens
into new temporary directories.
Fix#18444
* Change log root for integration tests to use the REPO_TEST_DIR
There is a potential race in the drone integration tests whereby test-mysql etc
will start writing to log files causing make test-check fail.
Fix#18077
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Backport #18451
One of the repeated intermittent failures we see in testing is a failure due to
branches not being ready to merge.
Prior to the immediate queue implementation we would attempt to flush all the queues
and this would prevent the issue. However, the immediate queue is not flushable so
the flushall is not successful at preventing this.
This PR proposes an alternative solution - wait some time and try again up to 5 times.
If this fails then there is a genuine issue and we should fail.
Related #17719
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix partial cloning a repo (#18373)
- Backport from: #18373
- Backport isn't 1-1, because the frontport had a refactor in that area,
which v1.16 doesn't have.
* Include diff & use copy
* Add partial clone test
* patch
* Apply suggestions from code review
* globalArgs first
* avoid copy but make GlobalCMDArgs append first
* please linter
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: 6543 <6543@obermui.de>
* migrations: a deadline at January 1st, 1970 is valid
Do not change the deadline value if it is set to January 1st, 1970.
Setting the deadline to year 9999 when it is zero (which is equal to
January 1st, 1970) modifies a deadline set to January 1st, 1970 which
is a valid date. In addition, setting a date in year 9999 will be
converted to a null date in some cases.
Signed-off-by: Loïc Dachary <loic@dachary.org>
* tests: set milestone.deadline_unix in fixtures
The value of deadline_unix must be set to 253370764800 (i.e. 9999-01-01) in
fixtures, otherwise it will be inserted as null which leads to
unexpected errors. For instance, DumpRepository will store a null
deadline_unix as 0 (i.e. 1970-01-01) and RestoreRepository will change
it to 9999-01-01.
Signed-off-by: Loïc Dachary <loic@dachary.org>
Co-authored-by: Loïc Dachary <loic@dachary.org>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* Team permission allow different unit has different permission
* Finish the interface and the logic
* Fix lint
* Fix translation
* align center for table cell content
* Fix fixture
* merge
* Fix test
* Add deprecated
* Improve code
* Add tooltip
* Fix swagger
* Fix newline
* Fix tests
* Fix tests
* Fix test
* Fix test
* Max permission of external wiki and issues should be read
* Move team units with limited max level below units table
* Update label and column names
* Some improvements
* Fix lint
* Some improvements
* Fix template variables
* Add permission docs
* improve doc
* Fix fixture
* Fix bug
* Fix some bug
* fix
* gofumpt
* Integration test for migration (#18124)
integrations: basic test for Gitea {dump,restore}-repo
This is a first step for integration testing of DumpRepository and
RestoreRepository. It:
runs a Gitea server,
dumps a repo via DumpRepository to the filesystem,
restores the repo via RestoreRepository from the filesystem,
dumps the restored repository to the filesystem,
compares the first and second dump and expects them to be identical
The verification is trivial and the goal is to add more tests for each
topic of the dump.
Signed-off-by: Loïc Dachary <loic@dachary.org>
* Team permission allow different unit has different permission
* Finish the interface and the logic
* Fix lint
* Fix translation
* align center for table cell content
* Fix fixture
* merge
* Fix test
* Add deprecated
* Improve code
* Add tooltip
* Fix swagger
* Fix newline
* Fix tests
* Fix tests
* Fix test
* Fix test
* Max permission of external wiki and issues should be read
* Move team units with limited max level below units table
* Update label and column names
* Some improvements
* Fix lint
* Some improvements
* Fix template variables
* Add permission docs
* improve doc
* Fix fixture
* Fix bug
* Fix some bug
* Fix bug
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Aravinth Manivannan <realaravinth@batsense.net>
integrations: basic test for Gitea {dump,restore}-repo
This is a first step for integration testing of DumpRepository and
RestoreRepository. It:
runs a Gitea server,
dumps a repo via DumpRepository to the filesystem,
restores the repo via RestoreRepository from the filesystem,
dumps the restored repository to the filesystem,
compares the first and second dump and expects them to be identical
The verification is trivial and the goal is to add more tests for each
topic of the dump.
Signed-off-by: Loïc Dachary <loic@dachary.org>
* Add API to get issue/pull comments and events (timeline)
Adds an API to get both comments and events in one endpoint with all required data.
Closesgo-gitea/gitea#13250
* Fix swagger
* Don't show code comments (use review api instead)
* fmt
* Fix comment
* Time -> TrackedTime
* Use var directly
* Add logger
* Fix lint
* Fix test
* Add comments
* fmt
* [test] get issue directly by ID
* Update test
* Add description for changed refs
* Fix build issues + lint
* Fix build
* Use string enums
* Update swagger
* Support `page` and `limit` params
* fmt + swagger
* Use global slices
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Handle invalid issues
- When you hover over a issue reference, and the issue doesn't exist, it
will just hang on the loading animation.
- This patch fixes that by showing them the pop-up with a "Error
occured" message.
* Add I18N
* refactor
* fix comment for lint
* fix unit test for i18n
* fix unit test for i18n
* add comments
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
A consequence of forcibly setting the RoutePath to the escaped url is that the
auto routing to endpoints without terminal slashes fails (Causing #18060.) This
failure raises the possibility that forcibly setting the RoutePath causes other
unexpected behaviors too.
Therefore, instead we should simply pre-escape the URL in the process registering
handler. Then the request URL will be properly escaped for all the following calls.
Fix#17938Fix#18060
Replace #18062
Replace #17997
Signed-off-by: Andrew Thornton <art27@cantab.net>
PR #17997 means that urls with terminal '/' are no longer immediately mapped
to the url without a terminal slash. However, it has revealed that the NotFound handler
appears to have been lost.
This PR adds back in a NotFound handler that simply redirects to a path without the
terminal slash or runs the NotFound handler.
Fix#18060
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Make test work with different default branch config
On a system configured with a different default branch name, doGitInitTestRepository
will create a repository with a branch named differently, and so further tests
would break:
--- FAIL: TestGit/HTTP/PushCreate/SuccessfullyPushAndCreateTestRepository (0.02s)
git_helper_for_declarative_test.go:167:
Error Trace: git_helper_for_declarative_test.go:167
Error: Received unexpected error:
exit status 1 - error: src refspec master does not match any
error: failed to push some refs to 'http://127.0.0.1:3003/user2/repo-tmp-push-create-http.git'
Test: TestGit/HTTP/PushCreate/SuccessfullyPushAndCreateTestRepository
git_test.go:587:
Error Trace: git_test.go:587
Error: Received unexpected error:
repository does not exist [id: 0, uid: 0, owner_name: user2, name: repo-tmp-push-create-http]
Test: TestGit/HTTP/PushCreate
* Update integrations/git_helper_for_declarative_test.go
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
* Abort merge if head has been updated before pressing merge
It is possible that a PR head may be pushed to between the merge page being shown
and the merge button being pressed. Pass the current expected head in as a parameter
and cancel the merge if it has changed.
Fix#18028
Signed-off-by: Andrew Thornton <art27@cantab.net>
* adjust swagger
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix test
Signed-off-by: Andrew Thornton <art27@cantab.net>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
This PR contains multiple fixes. The most important of which is:
* Prevent hang in git cat-file if the repository is not a valid repository
Unfortunately it appears that if git cat-file is run in an invalid
repository it will hang until stdin is closed. This will result in
deadlocked /pulls pages and dangling git cat-file calls if a broken
repository is tried to be reviewed or pulls exists for a broken
repository.
Fix#14734Fix#9271Fix#16113
Otherwise there are a few small other fixes included which this PR was initially intending to fix:
* Fix panic on partial compares due to missing PullRequestWorkInProgressPrefixes
* Fix links on pulls pages due to regression from #17551 - by making most /issues routes match /pulls too - Fix#17983
* Fix links on feeds pages due to another regression from #17551 but also fix issue with syncing tags - Fix#17943
* Add missing locale entries for oauth group claims
* Prevent NPEs if ColorFormat is called on nil users, repos or teams.
There was an unfortunate regression in #14293 which has led to the double decoding
of url parameter elements if they contain a '%'. This is due to an issue
with the way chi decodes its RoutePath. In detail the problem lies in
mux.go where the routeHTTP path uses the URL.RawPath or even the
URL.Path instead of the escaped path to do routing.
This PR simply forcibly sets the routePath to that of the EscapedPath.
Fix#17938
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Move keys to models/keys
* Rename models/keys -> models/asymkey
* change the missed package name
* Fix package alias
* Fix test
* Fix docs
* Fix test
* Fix test
* merge
* Some refactors related repository model
* Move more methods out of repository
* Move repository into models/repo
* Fix test
* Fix test
* some improvements
* Remove unnecessary function
* Improve install code to avoid low-level mistakes.
If a user tries to do a re-install in a Gitea database, they gets a warning and double check.
When Gitea runs, it never create empty app.ini automatically.
Also some small (related) refactoring:
* Refactor db.InitEngine related logic make it more clean (especially for the install code)
* Move some i18n strings out from setting.go to make the setting.go can be easily maintained.
* Show errors in CLI code if an incorrect app.ini is used.
* APP_DATA_PATH is created when installing, and checked when starting (no empty directory is created any more).
Use hostmacher to replace matchlist.
And we introduce a better DialContext to do a full host/IP check, otherwise the attackers can still bypass the allow/block list by a 302 redirection.
There are multiple places where Gitea does not properly escape URLs that it is building and there are multiple places where it builds urls when there is already a simpler function available to use this.
This is an extensive PR attempting to fix these issues.
1. The first commit in this PR looks through all href, src and links in the Gitea codebase and has attempted to catch all the places where there is potentially incomplete escaping.
2. Whilst doing this we will prefer to use functions that create URLs over recreating them by hand.
3. All uses of strings should be directly escaped - even if they are not currently expected to contain escaping characters. The main benefit to doing this will be that we can consider relaxing the constraints on user names and reponames in future.
4. The next commit looks at escaping in the wiki and re-considers the urls that are used there. Using the improved escaping here wiki files containing '/'. (This implementation will currently still place all of the wiki files the root directory of the repo but this would not be difficult to change.)
5. The title generation in feeds is now properly escaped.
6. EscapePound is no longer needed - urls should be PathEscaped / QueryEscaped as necessary but then re-escaped with Escape when creating html with locales Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
The functioning of the code indexer queue really only makes sense as an unique queue
and doing this allows use to simplify the indexer data to simply delete the data if
the repo is no longer in the db.
Signed-off-by: Andrew Thornton <art27@cantab.net>
