The API endpoints for "git" can panic if they are called on an empty
repo. We can simply allow empty repos for these endpoints without worry
as they should just work.
Fix#22452
Signed-off-by: Andrew Thornton <art27@cantab.net>
closes#13585fixes#9067fixes#2386
ref #6226
ref #6219fixes#745
This PR adds support to process incoming emails to perform actions.
Currently I added handling of replies and unsubscribing from
issues/pulls. In contrast to #13585 the IMAP IDLE command is used
instead of polling which results (in my opinion 😉) in cleaner code.
Procedure:
- When sending an issue/pull reply email, a token is generated which is
present in the Reply-To and References header.
- IMAP IDLE waits until a new email arrives
- The token tells which action should be performed
A possible signature and/or reply gets stripped from the content.
I added a new service to the drone pipeline to test the receiving of
incoming mails. If we keep this in, we may test our outgoing emails too
in future.
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
- Move the file `compare.go` and `slice.go` to `slice.go`.
- Fix `ExistsInSlice`, it's buggy
- It uses `sort.Search`, so it assumes that the input slice is sorted.
- It passes `func(i int) bool { return slice[i] == target })` to
`sort.Search`, that's incorrect, check the doc of `sort.Search`.
- Conbine `IsInt64InSlice(int64, []int64)` and `ExistsInSlice(string,
[]string)` to `SliceContains[T]([]T, T)`.
- Conbine `IsSliceInt64Eq([]int64, []int64)` and `IsEqualSlice([]string,
[]string)` to `SliceSortedEqual[T]([]T, T)`.
- Add `SliceEqual[T]([]T, T)` as a distinction from
`SliceSortedEqual[T]([]T, T)`.
- Redesign `RemoveIDFromList([]int64, int64) ([]int64, bool)` to
`SliceRemoveAll[T]([]T, T) []T`.
- Add `SliceContainsFunc[T]([]T, func(T) bool)` and
`SliceRemoveAllFunc[T]([]T, func(T) bool)` for general use.
- Add comments to explain why not `golang.org/x/exp/slices`.
- Add unit tests.
After #22362, we can feel free to use transactions without
`db.DefaultContext`.
And there are still lots of models using `db.DefaultContext`, I think we
should refactor them carefully and one by one.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
`code.title` isn't an existing translation.
`explore.code` is the translation used for the tab, which I think
matches closely enough for this instead of a brand new translation.
Open to feedback on whether a new translation would be preferred
instead.
Signed-off-by: jolheiser <john.olheiser@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
Previously, there was an `import services/webhooks` inside
`modules/notification/webhook`.
This import was removed (after fighting against many import cycles).
Additionally, `modules/notification/webhook` was moved to
`modules/webhook`,
and a few structs/constants were extracted from `models/webhooks` to
`modules/webhook`.
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Push mirrors `sync_on_commit` option was added to the web interface in
v1.18.0. However, it's not added to the API. This PR updates the API
endpoint.
Fixes#22267
Also, I think this should be backported to 1.18
This PR changed the Auth interface signature from
`Verify(http *http.Request, w http.ResponseWriter, store DataStore, sess
SessionStore) *user_model.User`
to
`Verify(http *http.Request, w http.ResponseWriter, store DataStore, sess
SessionStore) (*user_model.User, error)`.
There is a new return argument `error` which means the verification
condition matched but verify process failed, we should stop the auth
process.
Before this PR, when return a `nil` user, we don't know the reason why
it returned `nil`. If the match condition is not satisfied or it
verified failure? For these two different results, we should have
different handler. If the match condition is not satisfied, we should
try next auth method and if there is no more auth method, it's an
anonymous user. If the condition matched but verify failed, the auth
process should be stop and return immediately.
This will fix#20563
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: Jason Song <i@wolfogre.com>
If user has reached the maximum limit of repositories:
- Before
- disallow create
- allow fork without limit
- This patch:
- disallow create
- disallow fork
- Add option `ALLOW_FORK_WITHOUT_MAXIMUM_LIMIT` (Default **true**) :
enable this allow user fork repositories without maximum number limit
fixed https://github.com/go-gitea/gitea/issues/21847
Signed-off-by: Xinyu Zhou <i@sourcehut.net>
Since we changed the /api/v1/ routes to disallow session authentication
we also removed their reliance on CSRF. However, we left the
ReverseProxy authentication here - but this means that POSTs to the API
are no longer protected by CSRF.
Now, ReverseProxy authentication is a kind of session authentication,
and is therefore inconsistent with the removal of session from the API.
This PR proposes that we simply remove the ReverseProxy authentication
from the API and therefore users of the API must explicitly use tokens
or basic authentication.
Replace #22077Close#22221Close#22077
Signed-off-by: Andrew Thornton <art27@cantab.net>
Fixes#19091
Add Feed for Releases and Tags, can be accessed through
`reponame/releases.rss`, `reponame/releases.atom`, `reponame/tags.rss`,
and `reponame/tags.atom`
Signed-off-by: Reo <reo_999@proton.me>
Fixes#22178
After this change upload versions with different semver metadata are
treated as the same version and trigger a duplicated version error.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
As recognised in #21841 the rendering of plain text files is somewhat
incorrect when there are ambiguous characters as the html code is double
escaped. In fact there are several more problems here.
We have a residual isRenderedHTML which is actually simply escaping the
file - not rendering it. This is badly named and gives the wrong
impression.
There is also unusual behaviour whether the file is called a Readme or
not and there is no way to get to the source code if the file is called
README.
In reality what should happen is different depending on whether the file
is being rendered a README at the bottom of the directory view or not.
1. If it is rendered as a README on a directory - it should simply be
escaped and rendered as `<pre>` text.
2. If it is rendered as a file then it should be rendered as source
code.
This PR therefore does:
1. Rename IsRenderedHTML to IsPlainText
2. Readme files rendered at the bottom of the directory are rendered
without line numbers
3. Otherwise plain text files are rendered as source code.
Replace #21841
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
depends on #22094
Fixes https://codeberg.org/forgejo/forgejo/issues/77
The old logic did not consider `is_internal`.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Close#14601Fix#3690
Revive of #14601.
Updated to current code, cleanup and added more read/write checks.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andre Bruch <ab@andrebruch.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Norwin <git@nroo.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Gitea will migrate the database model version automatically, but it
should be able to be disabled and keep Gitea shutdown if the version is
not matched.
`hex.EncodeToString` has better performance than `fmt.Sprintf("%x",
[]byte)`, we should use it as much as possible.
I'm not an extreme fan of performance, so I think there are some
exceptions:
- `fmt.Sprintf("%x", func(...)[N]byte())`
- We can't slice the function return value directly, and it's not worth
adding lines.
```diff
func A()[20]byte { ... }
- a := fmt.Sprintf("%x", A())
- a := hex.EncodeToString(A()[:]) // invalid
+ tmp := A()
+ a := hex.EncodeToString(tmp[:])
```
- `fmt.Sprintf("%X", []byte)`
- `strings.ToUpper(hex.EncodeToString(bytes))` has even worse
performance.
Change all license headers to comply with REUSE specification.
Fix#16132
Co-authored-by: flynnnnnnnnnn <flynnnnnnnnnn@github>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
If a deleted-branch has already been restored, a request to restore it
again will cause a NPE. This PR adds detection for this case, but also
disables buttons when they're clicked in order to help prevent
accidental repeat requests.
Fix#21930
Signed-off-by: Andrew Thornton <art27@cantab.net>
This PR addresses #19586
I added a mutex to the upload version creation which will prevent the
push errors when two requests try to create these database entries. I'm
not sure if this should be the final solution for this problem.
I added a workaround to allow a reupload of missing blobs. Normally a
reupload is skipped because the database knows the blob is already
present. The workaround checks if the blob exists on the file system.
This should not be needed anymore with the above fix so I marked this
code to be removed with Gitea v1.20.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Enable this to require captcha validation for user login. You also must
enable `ENABLE_CAPTCHA`.
Summary:
- Consolidate CAPTCHA template
- add CAPTCHA handle and context
- add `REQUIRE_CAPTCHA_FOR_LOGIN` config and docs
- Consolidate CAPTCHA set-up and verification code
Partially resolved#6049
Signed-off-by: Xinyu Zhou <i@sourcehut.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
Fix#20456
At some point during the 1.17 cycle abbreviated refishs to issue
branches started breaking. This is likely due serious inconsistencies in
our management of refs throughout Gitea - which is a bug needing to be
addressed in a different PR. (Likely more than one)
We should try to use non-abbreviated `fullref`s as much as possible.
That is where a user has inputted a abbreviated `refish` we should add
`refs/heads/` if it is `branch` etc. I know people keep writing and
merging PRs that remove prefixes from stored content but it is just
wrong and it keeps causing problems like this. We should only remove the
prefix at the time of
presentation as the prefix is the only way of knowing umambiguously and
permanently if the `ref` is referring to a `branch`, `tag` or `commit` /
`SHA`. We need to make it so that every ref has the appropriate prefix,
and probably also need to come up with some definitely unambiguous way
of storing `SHA`s if they're used in a `ref` or `refish` field. We must
not store a potentially
ambiguous `refish` as a `ref`. (Especially when referring a `tag` -
there is no reason why users cannot create a `branch` with the same
short name as a `tag` and vice versa and any attempt to prevent this
will fail. You can even create a `branch` and a
`tag` that matches the `SHA` pattern.)
To that end in order to fix this bug, when parsing issue templates check
the provided `Ref` (here a `refish` because almost all users do not know
or understand the subtly), if it does not start with `refs/` add the
`BranchPrefix` to it. This allows people to make their templates refer
to a `tag` but not to a `SHA` directly. (I don't think that is
particularly unreasonable but if people disagree I can make the `refish`
be checked to see if it matches the `SHA` pattern.)
Next we need to handle the issue links that are already written. The
links here are created with `git.RefURL`
Here we see there is a bug introduced in #17551 whereby the provided
`ref` argument can be double-escaped so we remove the incorrect external
escape. (The escape added in #17551 is in the right place -
unfortunately I missed that the calling function was doing the wrong
thing.)
Then within `RefURL()` we check if an unprefixed `ref` (therefore
potentially a `refish`) matches the `SHA` pattern before assuming that
is actually a `commit` - otherwise is assumed to be a `branch`. This
will handle most of the problem cases excepting the very unusual cases
where someone has deliberately written a `branch` to look like a `SHA1`.
But please if something is called a `ref` or interpreted as a `ref` make
it a full-ref before storing or using it. By all means if something is a
`branch` assume the prefix is removed but always add it back in if you
are using it as a `ref`. Stop storing abbreviated `branch` names and
`tag` names - which are `refish` as a `ref`. It will keep on causing
problems like this.
Fix#20456
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This patch provide a mechanism to disable RSS/Atom feed.
Signed-off-by: Xinyu Zhou <i@sourcehut.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: 6543 <6543@obermui.de>
This PR adds a context parameter to a bunch of methods. Some helper
`xxxCtx()` methods got replaced with the normal name now.
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The doctor check `storages` currently only checks the attachment
storage. This PR adds some basic garbage collection functionality for
the other types of storage.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Fix#19513
This PR introduce a new db method `InTransaction(context.Context)`,
and also builtin check on `db.TxContext` and `db.WithTx`.
There is also a new method `db.AutoTx` has been introduced but could be used by other PRs.
`WithTx` will always open a new transaction, if a transaction exist in context, return an error.
`AutoTx` will try to open a new transaction if no transaction exist in context.
That means it will always enter a transaction if there is no error.
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: 6543 <6543@obermui.de>
In #21637 it was mentioned that the purpose of the API routes for the
packages is unclear. This PR adds some documentation.
Fix#21637
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Fix#20921.
The `ctx.Repo.GitRepo` has been used in deleting issues when the issue
is a PR.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
This PR enhances the CORS middleware usage by allowing for the headers
to be configured in `app.ini`.
Fixes#21746
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The purpose of #18982 is to improve the SMTP mailer, but there were some
unrelated changes made to the SMTP auth in
d60c438694
This PR reverts these unrelated changes, fix#21744
Related #20471
This PR adds global quota limits for the package registry. Settings for
individual users/orgs can be added in a seperate PR using the settings
table.
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This addresses #21707 and adds a second package test case for a
non-semver compatible version (this might be overkill though since you
could also edit the old package version to have an epoch in front and
see the error, this just seemed more flexible for the future).
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Fix https://github.com/go-gitea/gitea/issues/21666
Caused by https://github.com/go-gitea/gitea/pull/19663
Before: when install, the INTERNAL_TOKEN was always generated and saved.
But the internal token may be already there by INTERNAL_TOKEN_URI
After: INTERNAL_TOKEN_URI file must be non-empty. When install, skip
internal token generation if the token exists.
_This is a different approach to #20267, I took the liberty of adapting
some parts, see below_
## Context
In some cases, a weebhook endpoint requires some kind of authentication.
The usual way is by sending a static `Authorization` header, with a
given token. For instance:
- Matrix expects a `Bearer <token>` (already implemented, by storing the
header cleartext in the metadata - which is buggy on retry #19872)
- TeamCity #18667
- Gitea instances #20267
- SourceHut https://man.sr.ht/graphql.md#authentication-strategies (this
is my actual personal need :)
## Proposed solution
Add a dedicated encrypt column to the webhook table (instead of storing
it as meta as proposed in #20267), so that it gets available for all
present and future hook types (especially the custom ones #19307).
This would also solve the buggy matrix retry #19872.
As a first step, I would recommend focusing on the backend logic and
improve the frontend at a later stage. For now the UI is a simple
`Authorization` field (which could be later customized with `Bearer` and
`Basic` switches):
The header name is hard-coded, since I couldn't fine any usecase
justifying otherwise.
## Questions
- What do you think of this approach? @justusbunsi @Gusted @silverwind
- ~~How are the migrations generated? Do I have to manually create a new
file, or is there a command for that?~~
- ~~I started adding it to the API: should I complete it or should I
drop it? (I don't know how much the API is actually used)~~
## Done as well:
- add a migration for the existing matrix webhooks and remove the
`Authorization` logic there
_Closes #19872_
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Gusted <williamzijl7@hotmail.com>
Co-authored-by: delvh <dev.lh@web.de>
I found myself wondering whether a PR I scheduled for automerge was
actually merged. It was, but I didn't receive a mail notification for it
- that makes sense considering I am the doer and usually don't want to
receive such notifications. But ideally I want to receive a notification
when a PR was merged because I scheduled it for automerge.
This PR implements exactly that.
The implementation works, but I wonder if there's a way to avoid passing
the "This PR was automerged" state down so much. I tried solving this
via the database (checking if there's an automerge scheduled for this PR
when sending the notification) but that did not work reliably, probably
because sending the notification happens async and the entry might have
already been deleted. My implementation might be the most
straightforward but maybe not the most elegant.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
A patch to #17335.
Just like AppPath, Gitea writes its own CustomConf into git hook scripts
too. If Gitea's CustomConf changes, then the git push may fail.
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
This patch provide a mechanism to disable
[sitemap](https://github.com/go-gitea/gitea/pull/18407).
Signed-off-by: Xinyu Zhou <i@sourcehut.net>
Co-authored-by: 6543 <6543@obermui.de>
Fixes an 500 error/panic if using the changed PR files API with pages
that should return empty lists because there are no items anymore.
`start-end` is then < 0 which ends in panic.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: delvh <dev.lh@web.de>
I noticed an admin is not allowed to upload packages for other users
because `ctx.IsSigned` was not set.
I added a check for `user.IsActive` and `user.ProhibitLogin` too because
both was not checked. Tests enforce this now.
Co-authored-by: Lauris BH <lauris@nix.lv>
The OAuth spec [defines two types of
client](https://datatracker.ietf.org/doc/html/rfc6749#section-2.1),
confidential and public. Previously Gitea assumed all clients to be
confidential.
> OAuth defines two client types, based on their ability to authenticate
securely with the authorization server (i.e., ability to
> maintain the confidentiality of their client credentials):
>
> confidential
> Clients capable of maintaining the confidentiality of their
credentials (e.g., client implemented on a secure server with
> restricted access to the client credentials), or capable of secure
client authentication using other means.
>
> **public
> Clients incapable of maintaining the confidentiality of their
credentials (e.g., clients executing on the device used by the resource
owner, such as an installed native application or a web browser-based
application), and incapable of secure client authentication via any
other means.**
>
> The client type designation is based on the authorization server's
definition of secure authentication and its acceptable exposure levels
of client credentials. The authorization server SHOULD NOT make
assumptions about the client type.
https://datatracker.ietf.org/doc/html/rfc8252#section-8.4
> Authorization servers MUST record the client type in the client
registration details in order to identify and process requests
accordingly.
Require PKCE for public clients:
https://datatracker.ietf.org/doc/html/rfc8252#section-8.1
> Authorization servers SHOULD reject authorization requests from native
apps that don't use PKCE by returning an error message
Fixes#21299
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This stype name is also used in many repos, example:
[``README_ZH.md``](https://github.com/go-gitea/gitea/blob/main/README_ZH.md)
Signed-off-by: a1012112796 <1012112796@qq.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
According to the OAuth spec
https://datatracker.ietf.org/doc/html/rfc6749#section-6 when "Refreshing
an Access Token"
> The authorization server MUST ... require client authentication for
confidential clients
Fixes#21418
Co-authored-by: Gusted <williamzijl7@hotmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Previously mentioning a user would link to its profile, regardless of
whether the user existed. This change tests if the user exists and only
if it does - a link to its profile is added.
* Fixes#3444
Signed-off-by: Yarden Shoham <hrsi88@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This prevents a 500 response, because null pointer exceptions in
rendering the template.
This happends bc the repoId is not in the repoMap because it is delete
fix#19076
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
At the moment, If admin disable Packages, still show the Packages on the
admin dashboard
This patch added a check to hide the Packages entry
Signed-off-by: baronbunny <its@baronbunny.cn>
Signed-off-by: baronbunny <its@baronbunny.cn>
At the moment a repository reference is needed for webhooks. With the
upcoming package PR we need to send webhooks without a repository
reference. For example a package is uploaded to an organization. In
theory this enables the usage of webhooks for future user actions.
This PR removes the repository id from `HookTask` and changes how the
hooks are processed (see `services/webhook/deliver.go`). In a follow up
PR I want to remove the usage of the `UniqueQueue´ and replace it with a
normal queue because there is no reason to be unique.
Co-authored-by: 6543 <6543@obermui.de>
depends on #18871
Added some api integration tests to help testing of #18798.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Fixes#21379
The commits are capped by `setting.UI.FeedMaxCommitNum` so
`len(commits)` is not the correct number. So this PR adds a new
`TotalCommits` field.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Support OAuth2 applications created by admins on the admin panel, they
aren't owned by anybody.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
NuGet symbol file lookup returned 404 on Visual Studio 2019 due to
case-sensitive api router. The api router should accept case-insensitive GUID.
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Partially fix#21213.
This PR will get client IP address from SSH_CONNECTION env which should
be the first field of that. And deliver it to the internal API so Gitea
routers could record the real IP from SSH requests.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: zeripath <art27@cantab.net>
Adds the settings pages to create OAuth2 apps also to the org settings
and allows to create apps for orgs.
Refactoring: the oauth2 related templates are shared for
instance-wide/org/user, and the backend code uses `OAuth2CommonHandlers`
to share code for instance-wide/org/user.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Close#20315 (fix the panic when parsing invalid input), Speed up #20231 (use ls-tree without size field)
Introduce ListEntriesRecursiveFast (ls-tree without size) and ListEntriesRecursiveWithSize (ls-tree with size)
Fixes#21250
Related #20414
Conan packages don't have to follow SemVer.
The migration fixes the setting for all existing Conan and Generic
(#20414) packages.
This fixes error "unauthorized_client: invalid client secret" when
client includes secret in Authorization header rather than request body.
OAuth spec permits both.
Sanity validation that client id and client secret in request are
consistent with Authorization header.
Improve error descriptions. Error codes remain the same.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
Calls to ToCommit are very slow due to fetching diffs, analyzing files.
This patch lets us supply `stat` as false to speed fetching a commit
when we don't need the diff.
/v1/repo/commits has a default `stat` set as true now. Set to false to
experience fetching thousands of commits per second instead of 2-5 per
second.
Only load SECRET_KEY and INTERNAL_TOKEN if they exist.
Never write the config file if the keys do not exist, which was only a fallback for Gitea upgraded from < 1.5
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Adds GitHub-like pages to view watched repos and subscribed issues/PRs
This is my second try to fix this, but it is better than the first since
it doesn't uses a filter option which could be slow when accessing
`/issues` or `/pulls` and it shows both pulls and issues (the first try
is #17053).
Closes#16111
Replaces and closes#17053
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This adds an api endpoint `/files` to PRs that allows to get a list of changed files.
built upon #18228, reviews there are included
closes https://github.com/go-gitea/gitea/issues/654
Co-authored-by: Anton Bracke <anton@ju60.de>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fixes#21282
As suggested by the [OAuth RFC](https://www.rfc-editor.org/rfc/rfc6749)
(quoted below), it's helpful to give more detail in the description
> error_description
OPTIONAL. Human-readable ASCII
[[USASCII](https://www.rfc-editor.org/rfc/rfc6749#ref-USASCII)] text
providing **additional information, used to assist the client developer
in understanding the error that occurred.**
Values for the "error_description" parameter MUST NOT include characters
outside the set %x20-21 / %x23-5B / %x5D-7E.
This PR would presumably
Fix#20522Fix#18773Fix#19069Fix#21077Fix#13622
-----
1. Check whether unit type is currently enabled
2. Check if it _will_ be enabled via opt
3. Allow modification as necessary
Signed-off-by: jolheiser <john.olheiser@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: 6543 <6543@obermui.de>
Addition to #20734, Fixes#20717
The `/index.json` endpoint needs to be accessible even if the registry
is private. The NuGet client uses this endpoint without
authentification.
The old fix only works if the NuGet cli is used with `--source <name>`
but not with `--source <url>/index.json`.
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Close#20098, in the NPM registry API, implemented to match what's described by https://github.com/npm/registry/blob/master/docs/REGISTRY-API.md#get-v1search
Currently have only implemented the bare minimum to work with the [Unity Package Manager](https://docs.unity3d.com/Manual/upm-ui.html).
Co-authored-by: Jack Vine <jackv@jack-lemur-suse.cat-prometheus.ts.net>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fixes#21184
Regression of #19552
Instead of using `GetBlobByPath` I use the already existing instances.
We need more information from #19530 if that error is still present.
If you are create a new new branch while viewing file or directory, you
get redirected to the root of the repo. With this PR, you keep your
current path instead of getting redirected to the repo root.
In #21088 I accidentally forgot to support multiple branches. It always
checks the default branch, no matter on which branch you are working on.
With this fix, it always shows the error from the current branch. Sorry
for that.
The PyPI name regexp is too restrictive and only permits lowercase characters. This PR adjusts the regexp to add in support for uppercase characters.
Fix#21014
Add support for triggering webhook notifications on wiki changes.
This PR contains frontend and backend for webhook notifications on wiki actions (create a new page, rename a page, edit a page and delete a page). The frontend got a new checkbox under the Custom Event -> Repository Events section. There is only one checkbox for create/edit/rename/delete actions, because it makes no sense to separate it and others like releases or packages follow the same schema.
The actions itself are separated, so that different notifications will be executed (with the "action" field). All the webhook receivers implement the new interface method (Wiki) and the corresponding tests.
When implementing this, I encounter a little bug on editing a wiki page. Creating and editing a wiki page is technically the same action and will be handled by the ```updateWikiPage``` function. But the function need to know if it is a new wiki page or just a change. This distinction is done by the ```action``` parameter, but this will not be sent by the frontend (on form submit). This PR will fix this by adding the ```action``` parameter with the values ```_new``` or ```_edit```, which will be used by the ```updateWikiPage``` function.
I've done integration tests with matrix and gitea (http).
Fix#16457
Signed-off-by: Aaron Fischer <mail@aaron-fischer.net>
A testing cleanup.
This pull request replaces `os.MkdirTemp` with `t.TempDir`. We can use the `T.TempDir` function from the `testing` package to create temporary directory. The directory created by `T.TempDir` is automatically removed when the test and all its subtests complete.
This saves us at least 2 lines (error check, and cleanup) on every instance, or in some cases adds cleanup that we forgot.
Reference: https://pkg.go.dev/testing#T.TempDir
```go
func TestFoo(t *testing.T) {
// before
tmpDir, err := os.MkdirTemp("", "")
require.NoError(t, err)
defer os.RemoveAll(tmpDir)
// now
tmpDir := t.TempDir()
}
```
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
When migrating add several more important sanity checks:
* SHAs must be SHAs
* Refs must be valid Refs
* URLs must be reasonable
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <matti@mdranta.net>
The webhook payload should use the right ref when it‘s specified in the testing request.
The compare URL should not be empty, a URL like `compare/A...A` seems useless in most cases but is helpful when testing.
* feat: extend issue template for yaml
* feat: support yaml template
* feat: render form to markdown
* feat: support yaml template for pr
* chore: rename to Fields
* feat: template unmarshal
* feat: split template
* feat: render to markdown
* feat: use full name as template file name
* chore: remove useless file
* feat: use dropdown of fomantic ui
* feat: update input style
* docs: more comments
* fix: render text without render
* chore: fix lint error
* fix: support use description as about in markdown
* fix: add field class in form
* chore: generate swagger
* feat: validate template
* feat: support is_nummber and regex
* test: fix broken unit tests
* fix: ignore empty body of md template
* fix: make multiple easymde editors work in one page
* feat: better UI
* fix: js error in pr form
* chore: generate swagger
* feat: support regex validation
* chore: generate swagger
* fix: refresh each markdown editor
* chore: give up required validation
* fix: correct issue template candidates
* fix: correct checkboxes style
* chore: ignore .hugo_build.lock in docs
* docs: separate out a new doc for merge templates
* docs: introduce syntax of yaml template
* feat: show a alert for invalid templates
* test: add case for a valid template
* fix: correct attributes of required checkbox
* fix: add class not-under-easymde for dropzone
* fix: use more back-quotes
* chore: remove translation in zh-CN
* fix EasyMDE statusbar margin
* fix: remove repeated blocks
* fix: reuse regex for quotes
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* fix hard-coded timeout and error panic in API archive download endpoint
This commit updates the `GET /api/v1/repos/{owner}/{repo}/archive/{archive}`
endpoint which prior to this PR had a couple of issues.
1. The endpoint had a hard-coded 20s timeout for the archiver to complete after
which a 500 (Internal Server Error) was returned to client. For a scripted
API client there was no clear way of telling that the operation timed out and
that it should retry.
2. Whenever the timeout _did occur_, the code used to panic. This was caused by
the API endpoint "delegating" to the same call path as the web, which uses a
slightly different way of reporting errors (HTML rather than JSON for
example).
More specifically, `api/v1/repo/file.go#GetArchive` just called through to
`web/repo/repo.go#Download`, which expects the `Context` to have a `Render`
field set, but which is `nil` for API calls. Hence, a `nil` pointer error.
The code addresses (1) by dropping the hard-coded timeout. Instead, any
timeout/cancelation on the incoming `Context` is used.
The code addresses (2) by updating the API endpoint to use a separate call path
for the API-triggered archive download. This avoids producing HTML-errors on
errors (it now produces JSON errors).
Signed-off-by: Peter Gardfjäll <peter.gardfjall.work@gmail.com>
The recovery, API, Web and package frameworks all create their own HTML
Renderers. This increases the memory requirements of Gitea
unnecessarily with duplicate templates being kept in memory.
Further the reloading framework in dev mode for these involves locking
and recompiling all of the templates on each load. This will potentially
hide concurrency issues and it is inefficient.
This PR stores the templates renderer in the context and stores this
context in the NormalRoutes, it then creates a fsnotify.Watcher
framework to watch files.
The watching framework is then extended to the mailer templates which
were previously not being reloaded in dev.
Then the locales are simplified to a similar structure.
Fix#20210Fix#20211Fix#20217
Signed-off-by: Andrew Thornton <art27@cantab.net>
Adds a new option to only show relevant repo's on the explore page, for bigger Gitea instances like Codeberg this is a nice option to enable to make the explore page more populated with unique and "high" quality repo's. A note is shown that the results are filtered and have the possibility to see the unfiltered results.
Co-authored-by: vednoc <vednoc@protonmail.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: 6543 <6543@obermui.de>
Add code to test if GetAttachmentByID returns an ErrAttachmentNotExist error
and return NotFound instead of InternalServerError
Fix#20884
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Related to #20650.
This will fix the behavior of the single repo action for pull requests and disables the button for other screens that don't have a single repo action currently.
- Currently the function takes in the `UserID` option, but isn't being
used within the SQL query. This patch fixes that by checking that only
teams are being returned that the user belongs to.
Fix#20829
Co-authored-by: delvh <dev.lh@web.de>
Whilst looking at #20840 I noticed that the Mirrors data doesn't appear
to be being used therefore we can remove this and in fact none of the
related code is used elsewhere so it can also be removed.
Related #20840
Related #20804
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Use the total issue count for UI
This fixes a problem where the "All" line item on the Issues or Pull Requests page was only showing the count of the selected repos instead of the total of all issues/prs in all repos.
The "total number of shown issues" number is now stashed in a different context variable in case it wants to be used by the frontend later. It's currently not being used.
Fixes#20574
* Remove unused context variable
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This adds support for getting the user's full name from the reverse
proxy in addition to username and email.
Tested locally with caddy serving as reverse proxy with Tailscale
authentication.
Signed-off-by: Will Norris <will@tailscale.com>
Signed-off-by: Will Norris <will@tailscale.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
The use of `--follow` makes getting these commits very slow on large repositories
as it results in searching the whole commit tree for a blob.
Now as nice as the results of `--follow` are, I am uncertain whether it is really
of sufficient importance to keep around.
Fix#20764
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
This PR rewrites the invisible unicode detection algorithm to more
closely match that of the Monaco editor on the system. It provides a
technique for detecting ambiguous characters and relaxes the detection
of combining marks.
Control characters are in addition detected as invisible in this
implementation whereas they are not on monaco but this is related to
font issues.
Close#19913
Signed-off-by: Andrew Thornton <art27@cantab.net>
* merge `CheckLFSVersion` into `InitFull` (renamed from `InitWithSyncOnce`)
* remove the `Once` during git init, no data-race now
* for doctor sub-commands, `InitFull` should only be called in initialization stage
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This bug affects tests which are sending emails (#20307). Some tests reinitialise the web routes (like `TestNodeinfo`) which messed up the mail templates. There is no reason why the templates should be loaded in the routes method.
* Added support for Pub packages.
* Update docs/content/doc/packages/overview.en-us.md
Co-authored-by: Gergely Nagy <algernon@users.noreply.github.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Gergely Nagy <algernon@users.noreply.github.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
This enables git.Command's Run to optionally use the given context directly so its deadline will be respected. Otherwise, it falls back to the previous behavior of using the supplied timeout or a default timeout value of 360 seconds.
repo's serviceRPC() calls now use the context's deadline (which is unset/unlimited) instead of the default 6-minute timeout. This means that large repo clones will no longer arbitrarily time out on the upload-pack step, and pushes can take longer than 6 minutes on the receive-pack step.
Fixes#20680
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* `PROTOCOL`: can be smtp, smtps, smtp+startls, smtp+unix, sendmail, dummy
* `SMTP_ADDR`: domain for SMTP, or path to unix socket
* `SMTP_PORT`: port for SMTP; defaults to 25 for `smtp`, 465 for `smtps`, and 587 for `smtp+startls`
* `ENABLE_HELO`, `HELO_HOSTNAME`: reverse `DISABLE_HELO` to `ENABLE_HELO`; default to false + system hostname
* `FORCE_TRUST_SERVER_CERT`: replace the unclear `SKIP_VERIFY`
* `CLIENT_CERT_FILE`, `CLIENT_KEY_FILE`, `USE_CLIENT_CERT`: clarify client certificates here
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Support localized README
* Slightly simplify getting the readme file and add some tests. Ensure that i18n also
works for docs/ etc.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update modules/markup/renderer.go
* Update modules/markup/renderer.go
* Update modules/markup/renderer.go
Co-authored-by: Andrew Thornton <art27@cantab.net>
- Add a new push mirror to specific repository
- Sync now ( send all the changes to the configured push mirrors )
- Get list of all push mirrors of a repository
- Get a push mirror by ID
- Delete push mirror by ID
Signed-off-by: Mohamed Sekour <mohamed.sekour@exfo.com>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: zeripath <art27@cantab.net>
WebAuthn have updated their specification to set the maximum size of the
CredentialID to 1023 bytes. This is somewhat larger than our current
size and therefore we need to migrate.
The PR changes the struct to add CredentialIDBytes and migrates the CredentialID string
to the bytes field before another migration drops the old CredentialID field. Another migration
renames this field back.
Fix#20457
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add latest commit's SHA to content response
- When requesting the contents of a filepath, add the latest commit's
SHA to the requested file.
- Resolves#12840
* Add swagger
* Fix NPE
* Fix tests
* Hook into LastCommitCache
* Move AddLastCommitCache to a common nogogit and gogit file
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Prevent NPE
Co-authored-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
- Always respect the user's configured mime type map
- Allow more types like image/pdf/video/audio to serve with correct content-type
- Shorten cache duration of raw files to 5 minutes, matching GitHub
- Don't set `content-disposition: attachment`, let the browser decide whether it wants to download or display a file directly
- Implement rfc5987 for filenames, remove previous hack. Confirmed it working in Safari.
- Make PDF attachment work in Safari by removing `sandbox` attribute.
This change will make a lot more file types open directly in browser now. Logic should generally be more readable than before with less `if` nesting and such.
Replaces: https://github.com/go-gitea/gitea/pull/20460
Replaces: https://github.com/go-gitea/gitea/pull/20455
Fixes: https://github.com/go-gitea/gitea/issues/20404
There are existing packages out there whose version do not conform to SemVer, yet, one would like to have them available in a generic package repository. To this end, remove the SemVer restriction on package versions when using the Generic package registry, and replace it with a check that simply makes sure the version isn't empty.
Signed-off-by: Gergely Nagy <me@gergo.csillger.hu>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: 6543 <6543@obermui.de>
Sometimes users want to receive email notifications of messages they create or reply to,
Added an option to personal preferences to allow users to choose
Closes#20149
The LastCommitCache code is a little complex and there is unnecessary
duplication between the gogit and nogogit variants.
This PR adds the LastCommitCache as a field to the git.Repository and
pre-creates it in the ReferencesGit helpers etc. There has been some
simplification and unification of the variant code.
Signed-off-by: Andrew Thornton <art27@cantab.net>
- When a repository has a pull request template, it will always override
the current content. With this PR it will prepend content to the
template content when appropriate. This is similar how GitHub(and GitLab
I presume) does it and it saves developers time to not go open their
commit and copy paste their will written commit message.
`no-transform` allegedly disables CloudFlare auto-minify and we did not
set caching headers on html or api requests, which seems good to have
regardless.
Transformation is still allowed for asset requests.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Andrew Thornton <art27@cantab.net>
When you create a new release(e.g. via Tea) and specify a tag that already exists on
the repository, Gitea will instead use the `UpdateRelease`
functionality. However it currently doesn't set the Target field. This
PR fixes that.
Cron will try to run certain things at startup but these depend on multiple things
being set-up. Therefore we should initialize cron last.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Examining Organization membership should not necessarily require sign-in if the organization is public and the members are public. Therefore we should adjust `/org/{org}/members` to not require login.
Fix#7501
Signed-off-by: a1012112796 <1012112796@qq.com>
Co-authored-by: zeripath <art27@cantab.net>
When viewing a subdirectory and the latest commit to that directory in
the table, the commit status icon incorrectly showed the status of the
HEAD commit instead of the latest for that directory.
[spectral](https://github.com/stoplightio/spectral) lints
openapi/swagger files for mistakes of which it has identified a few and
which I've fixed.
I had to put it into `lint-frontend` because it depends on node_modules
so can not run on Drone during the backend target. I plan to refactor
these targets later to `lint-js` and `lint-go` so that they are
categorized based on the tool dependencies.
Support synchronizing with the push mirrors whenever new commits are pushed or synced from pull mirror.
Related Issues: #18220
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Users who are following or being followed by a user should only be
displayed if the viewing user can see them.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Check if project has the same repository id with issue when assign project to issue
* Check if issue's repository id match project's repository id
* Add more permission checking
* Remove invalid argument
* Fix errors
* Add generic check
* Remove duplicated check
* Return error + add check for new issues
* Apply suggestions from code review
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: Gusted <williamzijl7@hotmail.com>
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Co-authored-by: 6543 <6543@obermui.de>
* Refactor `i18n` to `locale`
- Currently we're using the `i18n` variable naming for the `locale`
struct. This contains locale's specific information and cannot be used
for general i18n purpose, therefore refactoring it to `locale` makes
more sense.
- Ref: https://github.com/go-gitea/gitea/pull/20096#discussion_r906699200
* Update routers/install/install.go
- Completely remove U2F support from 1.18.0, 1.17.0 will be the last
release that U2F is somewhat supported. Users who used U2F would already
be warned about using U2F for a while now and should hopefully already
be migrated. But starting 1.18 definitely remove it.
* Prototyping
* Start work on creating offsets
* Modify tests
* Start prototyping with actual MPH
* Twiddle around
* Twiddle around comments
* Convert templates
* Fix external languages
* Fix latest translation
* Fix some test
* Tidy up code
* Use simple map
* go mod tidy
* Move back to data structure
- Uses less memory by creating for each language a map.
* Apply suggestions from code review
Co-authored-by: delvh <dev.lh@web.de>
* Add some comments
* Fix tests
* Try to fix tests
* Use en-US as defacto fallback
* Use correct slices
* refactor (#4)
* Remove TryTr, add log for missing translation key
* Refactor i18n
- Separate dev and production locale stores.
- Allow for live-reloading in dev mode.
Co-authored-by: zeripath <art27@cantab.net>
* Fix live-reloading & check for errors
* Make linter happy
* live-reload with periodic check (#5)
* Fix tests
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
This PR adds a new manager command to switch on SQL logging and to turn it off.
```
gitea manager logging log-sql
gitea manager logging log-sql --off
```
Signed-off-by: Andrew Thornton <art27@cantab.net>
The code introduced by #18185 gets the error from response after it was processed by goth.
That is incorrect, as goth (and golang.org/x/oauth) doesn't really care about the error, and it sends a token request with an empty authorization code to the server anyway, which always results in a `oauth2: cannot fetch token: 400 Bad Request` error from goth.
It means that unless the "state" parameter is omitted from the error response (which is required to be present, according to [RFC 6749, Section 4.1.2.1](https://datatracker.ietf.org/doc/html/rfc6749#section-4.1.2.1)) or the page is reloaded (makes the session invalid), a 500 Internal Server Error page will be displayed.
This fixes it by handling the error before the request is passed to goth.
* go.mod: add go-fed/{httpsig,activity/pub,activity/streams} dependency
go get github.com/go-fed/activity/streams@master
go get github.com/go-fed/activity/pub@master
go get github.com/go-fed/httpsig@master
* activitypub: implement /api/v1/activitypub/user/{username} (#14186)
Return informations regarding a Person (as defined in ActivityStreams
https://www.w3.org/TR/activitystreams-vocabulary/#dfn-person).
Refs: https://github.com/go-gitea/gitea/issues/14186
Signed-off-by: Loïc Dachary <loic@dachary.org>
* activitypub: add the public key to Person (#14186)
Refs: https://github.com/go-gitea/gitea/issues/14186
Signed-off-by: Loïc Dachary <loic@dachary.org>
* activitypub: go-fed conformant Clock instance
Signed-off-by: Loïc Dachary <loic@dachary.org>
* activitypub: signing http client
Signed-off-by: Loïc Dachary <loic@dachary.org>
* activitypub: implement the ReqSignature middleware
Signed-off-by: Loïc Dachary <loic@dachary.org>
* activitypub: hack_16834
Signed-off-by: Loïc Dachary <loic@dachary.org>
* Fix CI checks-backend errors with go mod tidy
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Change 2021 to 2022, properly format package imports
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Run make fmt and make generate-swagger
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Use Gitea JSON library, add assert for pkp
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Run make fmt again, fix err var redeclaration
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Remove LogSQL from ActivityPub person test
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Assert if json.Unmarshal succeeds
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Cleanup, handle invalid usernames for ActivityPub person GET request
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Rename hack_16834 to user_settings
Signed-off-by: Anthony Wang <ta180m@pm.me>
* Use the httplib module instead of http for GET requests
* Clean up whitespace with make fmt
* Use time.RFC1123 and make the http.Client proxy-aware
* Check if digest algo is supported in setting module
* Clean up some variable declarations
* Remove unneeded copy
* Use system timezone instead of setting.DefaultUILocation
* Use named constant for httpsigExpirationTime
* Make pubKey IRI #main-key instead of /#main-key
* Move /#main-key to #main-key in tests
* Implemented Webfinger endpoint.
* Add visible check.
* Add user profile as alias.
* Add actor IRI and remote interaction URL to WebFinger response
* fmt
* Fix lint errors
* Use go-ap instead of go-fed
* Run go mod tidy to fix missing modules in go.mod and go.sum
* make fmt
* Convert remaining code to go-ap
* Clean up go.sum
* Fix JSON unmarshall error
* Fix CI errors by adding @context to Person() and making sure types match
* Correctly decode JSON in api_activitypub_person_test.go
* Force CI rerun
* Fix TestActivityPubPersonInbox segfault
* Fix lint error
* Use @mariusor's suggestions for idiomatic go-ap usage
* Correctly add inbox/outbox IRIs to person
* Code cleanup
* Remove another LogSQL from ActivityPub person test
* Move httpsig algos slice to an init() function
* Add actor IRI and remote interaction URL to WebFinger response
* Update TestWebFinger to check for ActivityPub IRI in aliases
* make fmt
* Force CI rerun
* WebFinger: Add CORS header and fix Href -> Template for remote interactions
The CORS header is needed due to https://datatracker.ietf.org/doc/html/rfc7033#section-5 and fixes some Peertube <-> Gitea federation issues
* make lint-backend
* Make sure Person endpoint has Content-Type application/activity+json and includes PreferredUsername, URL, and Icon
Setting the correct Content-Type is essential for federating with Mastodon
* Use UTC instead of GMT
* Rename pkey to pubKey
* Make sure HTTP request Date in GMT
* make fmt
* dont drop err
* Make sure API responses always refer to username in original case
Copied from what I wrote on #19133 discussion: Handling username case is a very tricky issue and I've already encountered a Mastodon <-> Gitea federation bug due to Gitea considering Ta180m and ta180m to be the same user while Mastodon thinks they are two different users. I think the best way forward is for Gitea to only use the original case version of the username for federation so other AP software don't get confused.
* Move httpsig algs constant slice to modules/setting/federation.go
* Add new federation settings to app.example.ini and config-cheat-sheet
* Return if marshalling error
* Make sure Person IRIs are generated correctly
This commit ensures that if the setting.AppURL is something like "http://127.0.0.1:42567" (like in the integration tests), a trailing slash will be added after that URL.
* If httpsig verification fails, fix Host header and try again
This fixes a very rare bug when Gitea and another AP server (confirmed to happen with Mastodon) are running on the same machine, Gitea fails to verify incoming HTTP signatures. This is because the other AP server creates the sig with the public Gitea domain as the Host. However, when Gitea receives the request, the Host header is instead localhost, so the signature verification fails. Manually changing the host header to the correct value and trying the veification again fixes the bug.
* Revert "If httpsig verification fails, fix Host header and try again"
This reverts commit f53e46c721.
The bug was actually caused by nginx messing up the Host header when reverse-proxying since I didn't have the line `proxy_set_header Host $host;` in my nginx config for Gitea.
* Go back to using ap.IRI to generate inbox and outbox IRIs
* use const for key values
* Update routers/web/webfinger.go
* Use ctx.JSON in Person response to make code cleaner
* Revert "Use ctx.JSON in Person response to make code cleaner"
This doesn't work because the ctx.JSON() function already sends the response out and it's too late to edit the headers.
This reverts commit 95aad98897.
* Use activitypub.ActivityStreamsContentType for Person response Content Type
* Limit maximum ActivityPub request and response sizes to a configurable setting
* Move setting key constants to models/user/setting_keys.go
* Fix failing ActivityPubPerson integration test by checking the correct field for username
* Add a warning about changing settings that can break federation
* Add better comments
* Don't multiply Federation.MaxSize by 1<<20 twice
* Add more better comments
* Fix failing ActivityPubMissingPerson test
We now use ctx.ContextUser so the message printed out when a user does not exist is slightly different
* make generate-swagger
For some reason I didn't realize that /templates/swagger/v1_json.tmpl was machine-generated by make generate-swagger... I've been editing it by hand for three months! 🤦
* Move getting the RFC 2616 time to a separate function
* More code cleanup
* Update go-ap to fix empty liked collection and removed unneeded HTTP headers
* go mod tidy
* Add ed25519 to httpsig algorithms
* Use go-ap/jsonld to add @context and marshal JSON
* Change Gitea user agent from the default to Gitea/Version
* Use ctx.ServerError and remove all remote interaction code from webfinger.go
If there are dangling stopwatches with missing issues there will be repeated
logging of Unable to APIFormat stopwatches. These are unhelpful and instead
we should only log if the error is not an issue not exist error.
And we should also prevent an error on missing issue in GetActiveStopwatch too
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Allow render HTML with css/js external links
* Fix bug because of filename escape chars
* Fix lint
* Update docs about new configuration item
* Fix bug of render HTML in sub directory
* Add CSP head for displaying iframe in rendering file
* Fix test
* Apply suggestions from code review
Co-authored-by: delvh <dev.lh@web.de>
* Some improvements
* some improvement
* revert change in SanitizerDisabled of external renderer
* Add sandbox for iframe and support allow-scripts and allow-same-origin
* refactor
* fix
* fix lint
* fine tune
* use single option RENDER_CONTENT_MODE, use sandbox=allow-scripts
* fine tune CSP
* Apply suggestions from code review
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* When non-admin users use code search, get code unit accessible repos in one main query
* Modified some comments to match the changes
* Removed unnecessary check for Access Mode in Collaboration table
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Move access and repo permission to models/perm/access
* fix test
* fix git test
* Move functions sequence
* Some improvements per @KN4CK3R and @delvh
* Move issues related code to models/issues
* Move some issues related sub package
* Merge
* Fix test
* Fix test
* Fix test
* Fix test
* Rename some files
* Move access and repo permission to models/perm/access
* fix test
* Move some git related files into sub package models/git
* Fix build
* fix git test
* move lfs to sub package
* move more git related functions to models/git
* Move functions sequence
* Some improvements per @KN4CK3R and @delvh
Automatically add sidebar in the wiki view containing a TOC for the wiki page.
Make the TOC collapsable
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Ensure minimum mirror interval is reported on settings page
Expecting users to guess the minimum mirror interval appears a little unkind.
In this PR we simply change the locale string to include the minimum interval.
This will of course be affected by our current localization framework but...
we can fix that else where.
This PR also includes some fixes for error handling on the settings page as
previously the mirror block amongst others would simply disappear on error.
Fix#3737
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update options/locale/locale_en-US.ini
Co-authored-by: Gusted <williamzijl7@hotmail.com>
* placate lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Update options/locale/locale_en-US.ini
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Gusted <williamzijl7@hotmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Move some repository related code into sub package
* Move more repository functions out of models
* Fix lint
* Some performance optimization for webhooks and others
* some refactors
* Fix lint
* Fix
* Update modules/repository/delete.go
Co-authored-by: delvh <dev.lh@web.de>
* Fix test
* Merge
* Fix test
* Fix test
* Fix test
* Fix test
Co-authored-by: delvh <dev.lh@web.de>
Fixes#12338
This allows use to talk to the API with our ssh certificate (and/or ssh-agent) without needing to fetch an API key or tokens.
It will just automatically work when users have added their ssh principal in gitea.
This needs client code in tea
Update: also support normal pubkeys
ref: https://tools.ietf.org/html/draft-cavage-http-signatures
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Fixes#19791 by adding an check if filtering after any repo; if yes, simply set the total count for the pageing to the sum of the issue count for each selected repo by utilize `issueCountByRepo`.
Fix#19791
- To use the web's API to get information about a issue/pull on a
repository, doesn't require authorization(nor that the repository isn't
archived).
- Regressed by: #19318
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
Milestones in archived repos should not be displayed on `/milestones`. Therefore
we should exclude these repositories from milestones page.
Fix#18257
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add LFS API
* Update routers/api/v1/repo/file.go
Co-authored-by: Gusted <williamzijl7@hotmail.com>
* Apply suggestions
* Apply suggestions
* Update routers/api/v1/repo/file.go
Co-authored-by: Gusted <williamzijl7@hotmail.com>
* Report errors
* ADd test
* Use own repo for test
* Use different repo name
* Improve handling
* Slight restructures
1. Avoid reading the blob data multiple times
2. Ensure that caching is only checked when about to serve the blob/lfs
3. Avoid nesting by returning early
4. Make log message a bit more clear
5. Ensure that the dataRc is closed by defer when passed to ServeData
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Gusted <williamzijl7@hotmail.com>
Co-authored-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
If the context is cancelled `.NotificationUnreadCount` in a template can
cause an infinite loop with `ctx.ServerError()` being called, which
creates a template that then calls `.NotificationUnreadCount` calling
`GetNotificationCount()` with the cancelled context resulting in an
error that calls `ctx.ServerError`... and so on...
This PR simply stops calling `ctx.ServerError` in the error handler code
for `.NotificationUnreadCount` as we have already started rendering and
so it is too late to call `ctx.ServerError`. Additionally we skip
logging the error if it's a context cancelled error.
Fix#19793
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
The cache service can be disabled - at which point ctx.Cache will be nil
and the use of it will cause an NPE.
The main part of this PR is that the cache is used for restricting
resending of activation mails and without this we cache we cannot
restrict this. Whilst this code could be re-considered to use the db and
probably should be, I think we can simply disable this code in the case
that the cache is disabled.
There are also several bug fixes in the /nodeinfo API endpoint.
Signed-off-by: Andrew Thornton <art27@cantab.net>
use http.StatusTemporaryRedirect(307) when serve avatar directly
browser caches 301 redirections, pre-signed s3 url would expire at some later point
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
- Don't use hacky solution to limit to the correct RepoID's, instead use
current code to handle these limits. The existing code is more correct
than the hacky solution.
- Resolves#19636
- Add test-case
* Update go tool dependencies
Updated all tool dependencies to latest tags, hoping CI will like it.
* fix new lint errors
* handle more strings.Title cases
* remove lint skip
This adds the [Webfinger](https://webfinger.net/) endpoint for federation.
Supported schemes are `acct` and `mailto`. The profile and avatar url are returned as metadata.
Although the use of LastModified dates for caching of git objects should be
discouraged (as it is not native to git - and there are a LOT of ways this
could be incorrect) - LastModified dates can be a helpful somewhat more human
way of caching for simple cases.
This PR adds this header and handles the If-Modified-Since header to the /raw/
routes.
Fix#18354
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
* Fix indention
Signed-off-by: kolaente <k@knt.li>
* Add option to merge a pr right now without waiting for the checks to succeed
Signed-off-by: kolaente <k@knt.li>
* Fix lint
Signed-off-by: kolaente <k@knt.li>
* Add scheduled pr merge to tables used for testing
Signed-off-by: kolaente <k@knt.li>
* Add status param to make GetPullRequestByHeadBranch reusable
Signed-off-by: kolaente <k@knt.li>
* Move "Merge now" to a seperate button to make the ui clearer
Signed-off-by: kolaente <k@knt.li>
* Update models/scheduled_pull_request_merge.go
Co-authored-by: 赵智超 <1012112796@qq.com>
* Update web_src/js/index.js
Co-authored-by: 赵智超 <1012112796@qq.com>
* Update web_src/js/index.js
Co-authored-by: 赵智超 <1012112796@qq.com>
* Re-add migration after merge
* Fix frontend lint
* Fix version compare
* Add vendored dependencies
* Add basic tets
* Make sure the api route is capable of scheduling PRs for merging
* Fix comparing version
* make vendor
* adopt refactor
* apply suggestion: User -> Doer
* init var once
* Fix Test
* Update templates/repo/issue/view_content/comments.tmpl
* adopt
* nits
* next
* code format
* lint
* use same name schema; rm CreateUnScheduledPRToAutoMergeComment
* API: can not create schedule twice
* Add TestGetBranchNamesForSha
* nits
* new go routine for each pull to merge
* Update models/pull.go
Co-authored-by: a1012112796 <1012112796@qq.com>
* Update models/scheduled_pull_request_merge.go
Co-authored-by: a1012112796 <1012112796@qq.com>
* fix & add renaming sugestions
* Update services/automerge/pull_auto_merge.go
Co-authored-by: a1012112796 <1012112796@qq.com>
* fix conflict relicts
* apply latest refactors
* fix: migration after merge
* Update models/error.go
Co-authored-by: delvh <dev.lh@web.de>
* Update options/locale/locale_en-US.ini
Co-authored-by: delvh <dev.lh@web.de>
* Update options/locale/locale_en-US.ini
Co-authored-by: delvh <dev.lh@web.de>
* adapt latest refactors
* fix test
* use more context
* skip potential edgecases
* document func usage
* GetBranchNamesForSha() -> GetRefsBySha()
* start refactoring
* ajust to new changes
* nit
* docu nit
* the great check move
* move checks for branchprotection into own package
* resolve todo now ...
* move & rename
* unexport if posible
* fix
* check if merge is allowed before merge on scheduled pull
* debugg
* wording
* improve SetDefaults & nits
* NotAllowedToMerge -> DisallowedToMerge
* fix test
* merge files
* use package "errors"
* merge files
* add string names
* other implementation for gogit
* adapt refactor
* more context for models/pull.go
* GetUserRepoPermission use context
* more ctx
* use context for loading pull head/base-repo
* more ctx
* more ctx
* models.LoadIssueCtx()
* models.LoadIssueCtx()
* Handle pull_service.Merge in one DB transaction
* add TODOs
* next
* next
* next
* more ctx
* more ctx
* Start refactoring structure of old pull code ...
* move code into new packages
* shorter names ... and finish **restructure**
* Update models/branches.go
Co-authored-by: zeripath <art27@cantab.net>
* finish UpdateProtectBranch
* more and fix
* update datum
* template: use "svg" helper
* rename prQueue 2 prPatchCheckerQueue
* handle automerge in queue
* lock pull on git&db actions ...
* lock pull on git&db actions ...
* add TODO notes
* the regex
* transaction in tests
* GetRepositoryByIDCtx
* shorter table name and lint fix
* close transaction bevore notify
* Update models/pull.go
* next
* CheckPullMergable check all branch protections!
* Update routers/web/repo/pull.go
* CheckPullMergable check all branch protections!
* Revert "PullService lock via pullID (#19520)" (for now...)
This reverts commit 6cde7c9159a5ea75a10356feb7b8c7ad4c434a9a.
* Update services/pull/check.go
* Use for a repo action one database transaction
* Apply suggestions from code review
* Apply suggestions from code review
Co-authored-by: delvh <dev.lh@web.de>
* Update services/issue/status.go
Co-authored-by: delvh <dev.lh@web.de>
* Update services/issue/status.go
Co-authored-by: delvh <dev.lh@web.de>
* use db.WithTx()
* gofmt
* make pr.GetDefaultMergeMessage() context aware
* make MergePullRequestForm.SetDefaults context aware
* use db.WithTx()
* pull.SetMerged only with context
* fix deadlock in `test-sqlite\#TestAPIBranchProtection`
* dont forget templates
* db.WithTx allow to set the parentCtx
* handle db transaction in service packages but not router
* issue_service.ChangeStatus just had caused another deadlock :/
it has to do something with how notification package is handled
* if we merge a pull in one database transaktion, we get a lock, because merge infoce internal api that cant handle open db sessions to the same repo
* ajust to current master
* Apply suggestions from code review
Co-authored-by: delvh <dev.lh@web.de>
* dont open db transaction in router
* make generate-swagger
* one _success less
* wording nit
* rm
* adapt
* remove not needed test files
* rm less diff & use attr in JS
* ...
* Update services/repository/files/commit.go
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* ajust db schema for PullAutoMerge
* skip broken pull refs
* more context in error messages
* remove webUI part for another pull
* remove more WebUI only parts
* API: add CancleAutoMergePR
* Apply suggestions from code review
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* fix lint
* Apply suggestions from code review
* cancle -> cancel
Co-authored-by: delvh <dev.lh@web.de>
* change queue identifyer
* fix swagger
* prevent nil issue
* fix and dont drop error
* as per @zeripath
* Update integrations/git_test.go
Co-authored-by: delvh <dev.lh@web.de>
* Update integrations/git_test.go
Co-authored-by: delvh <dev.lh@web.de>
* more declarative integration tests (dedup code)
* use assert.False/True helper
Co-authored-by: 赵智超 <1012112796@qq.com>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* chore: add health check endpoint
docs: update document about health check
fix: fix up Sqlite3 ping. current ping will success even if the db file is missing
fix: do not expose privacy information in output field
* refactor: remove HealthChecker struct
* Added `/api/healthz` to install routes.
This was needed for using /api/healthz endpoint in Docker healthchecks,
otherwise, Docker would never become healthy if using healthz endpoint
and users would not be able to complete the installation of Gitea.
* Update modules/cache/cache.go
* fine tune
* Remove unnecessary test code. Now there are 2 routes for installation (and maybe more in future)
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Marcos de Oliveira <marcossantos@furb.br>
- dont overwrite err with nil unintentionaly
- rename CheckPRReadyToMerge to CheckPullBranchProtections
- rename prQueue to prPatchCheckerQueue
from #9307
Co-authored-by: delvh <dev.lh@web.de>
* Apply DefaultUserIsRestricted in CreateUser
* Enforce system defaults in CreateUser
Allow for overwrites with CreateUserOverwriteOptions
* Fix compilation errors
* Add "restricted" option to create user command
* Add "restricted" option to create user admin api
* Respect default setting.Service.RegisterEmailConfirm and setting.Service.RegisterManualConfirm where needed
* Revert "Respect default setting.Service.RegisterEmailConfirm and setting.Service.RegisterManualConfirm where needed"
This reverts commit ee95d3e8dc.
Targeting #14936, #15332
Adds a collaborator permissions API endpoint according to GitHub API: https://docs.github.com/en/rest/collaborators/collaborators#get-repository-permissions-for-a-user to retrieve a collaborators permissions for a specific repository.
### Checks the repository permissions of a collaborator.
`GET` `/repos/{owner}/{repo}/collaborators/{collaborator}/permission`
Possible `permission` values are `admin`, `write`, `read`, `owner`, `none`.
```json
{
"permission": "admin",
"role_name": "admin",
"user": {}
}
```
Where `permission` and `role_name` hold the same `permission` value and `user` is filled with the user API object. Only admins are allowed to use this API endpoint.
* Don't error when branch's commit doesn't exist
- If one of the branches no longer exists, don't throw an error, it's possible that the branch was destroyed during the process. Simply skip it and disregard it.
- Resolves#19541
* Don't send empty objects
* Use more minimal approach
Adds a feature [like GitHub has](https://docs.github.com/en/pull-requests/collaborating-with-pull-requests/proposing-changes-to-your-work-with-pull-requests/creating-a-pull-request-from-a-fork) (step 7).
If you create a new PR from a forked repo, you can select (and change later, but only if you are the PR creator/poster) the "Allow edits from maintainers" option.
Then users with write access to the base branch get more permissions on this branch:
* use the update pull request button
* push directly from the command line (`git push`)
* edit/delete/upload files via web UI
* use related API endpoints
You can't merge PRs to this branch with this enabled, you'll need "full" code write permissions.
This feature has a pretty big impact on the permission system. I might forgot changing some things or didn't find security vulnerabilities. In this case, please leave a review or comment on this PR.
Closes#17728
Co-authored-by: 6543 <6543@obermui.de>
This gets the necessary data to the issuelist for it to support a clickable commit status icon which pops up the full list of commit statuses related to the commit. It accomplishes this without any additional queries or fetching as the existing codepath was already doing the necessary work but only returning the "last" status. All methods were wrapped to call the least-filtered version of each function in order to maximize code reuse.
Note that I originally left `getLastCommitStatus()` in `pull.go` which called to the new function, but `make lint` complained that it was unused, so I removed it. I would have preferred to keep it, but alas.
The only thing I'd still like to do here is force these popups to happen to the right by default instead of the left. I see that the only other place this is popping up right is on view_list.tmpl, but I can't figure out how/why right now.
Fixes#18810
* Improve dashboard's repo list performance
- Avoid a lot of database lookups for all the repo's, by adding a
undocumented "minimal" mode for this specific task, which returns the
data that's only needed by this list which doesn't require any database
lookups.
- Makes fetching these list faster.
- Less CPU overhead when a user visits home page.
* Refactor javascript code + fix Fork icon
- Use async in the function so we can use `await`.
- Remove `archivedFilter` check for count, as it doesn't make sense to
show the count of repos when you can't even see them(as they are
filited away).
* Add `count_only`
* Remove uncessary code
* Improve comment
Co-authored-by: delvh <dev.lh@web.de>
* Update web_src/js/components/DashboardRepoList.js
Co-authored-by: delvh <dev.lh@web.de>
* Update web_src/js/components/DashboardRepoList.js
Co-authored-by: delvh <dev.lh@web.de>
* By default apply minimal mode
* Remove `minimal` paramater
* Refactor count header
* Simplify init
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
- Don't panic on `ErrEmailInvalid`, this was caused due that we were
trying to force `ErrEmailCharIsNotSupported` interface, which panics.
- Resolves#19397
When a mirror repo interval is updated by the UI it is rescheduled with that interval
however the API does not do this. The API also lacks the enable_prune option.
This PR adds this functionality in to the API Edit Repo endpoint.
Signed-off-by: Andrew Thornton <art27@cantab.net>
- Add reqSignIn to `/user/task/{task}` as it specific to a logged in user currently not-logged in user could cause a NPE.
- Move `/user/stopwatch` & `/user/search` middleware before the actual function is called, because functions are executed in order and currently hadn't any effect and could as well cause a NPE due to that.
- Remove `/user/active` reqSignIn middleware, because when you want to active a account you're not "signed in" so it doesn't make sense to add that middleware.
Do a refactoring to the CSRF related code, remove most unnecessary functions.
Parse the generated token's issue time, regenerate the token every a few minutes.
Reusing `/api/v1` from Gitea UI Pages have pros and cons.
Pros:
1) Less code copy
Cons:
1) API/v1 have to support shared session with page requests.
2) You need to consider for each other when you want to change something about api/v1 or page.
This PR moves all dependencies to API/v1 from UI Pages.
Partially replace #16052
Remove two unmaintained vendor packages `i18n` and `paginater`. Changes:
* Rewrite `i18n` package with a more clear fallback mechanism. Fix an unstable `Tr` behavior, add more tests.
* Refactor the legacy `Paginater` to `Paginator`, test cases are kept unchanged.
Trivial enhancement (no breaking for end users):
* Use the first locale in LANGS setting option as the default, add a log to prevent from surprising users.
* An attempt to sync a non-mirror repo must give 400 (Bad Request)
* add missing return statement
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
The main purpose is to refactor the legacy `unknwon/com` package.
1. Remove most imports of `unknwon/com`, only `util/legacy.go` imports the legacy `unknwon/com`
2. Use golangci's depguard to process denied packages
3. Fix some incorrect values in golangci.yml, eg, the version should be quoted string `"1.18"`
4. Use correctly escaped content for `go-import` and `go-source` meta tags
5. Refactor `com.Expand` to our stable (and the same fast) `vars.Expand`, our `vars.Expand` can still return partially rendered content even if the template is not good (eg: key mistach).
Skip `checkAppUrl` message on installation page because the ROOT_URL is not determined yet
Move global var `supportedDbTypeNames` into `install.Init` as a local var
Follows #19266, #8553, Close#18553, now there are only three `Run..(&RunOpts{})` functions.
* before: `stdout, err := RunInDir(path)`
* now: `stdout, _, err := RunStdString(&git.RunOpts{Dir:path})`
Continues on from #19202.
Following the addition of pprof labels we can now more easily understand the relationship between a goroutine and the requests that spawn them.
This PR takes advantage of the labels and adds a few others, then provides a mechanism for the monitoring page to query the pprof goroutine profile.
The binary profile that results from this profile is immediately piped in to the google library for parsing this and then stack traces are formed for the goroutines.
If the goroutine is within a context or has been created from a goroutine within a process context it will acquire the process description labels for that process.
The goroutines are mapped with there associate pids and any that do not have an associated pid are placed in a group at the bottom as unbound.
In this way we should be able to more easily examine goroutines that have been stuck.
A manager command `gitea manager processes` is also provided that can export the processes (with or without stacktraces) to the command line.
Signed-off-by: Andrew Thornton <art27@cantab.net>
This make checks in one single place so they dont differ and maintainer can not forget a check in one place while adding it to the other .... ( as it's atm )
Fix:
* The API does ignore issue dependencies where Web does not
* The API checks if "IsSignedIfRequired" where Web does not - UI probably do but nothing will some to craft custom requests
* Default merge message is crafted a bit different between API and Web if not set on specific cases ...
This follows
* https://github.com/go-gitea/gitea/issues/18553
Introduce `RunWithContextString` and `RunWithContextBytes` to help the refactoring. Add related unit tests. They keep the same behavior to save stderr into err.Error() as `RunInXxx` before.
Remove `RunInDirTimeoutPipeline` `RunInDirTimeoutFullPipeline` `RunInDirTimeout` `RunInDirTimeoutEnv` `RunInDirPipeline` `RunInDirFullPipeline` `RunTimeout`, `RunInDirTimeoutEnvPipeline`, `RunInDirTimeoutEnvFullPipeline`, `RunInDirTimeoutEnvFullPipelineFunc`.
Then remaining `RunInDir` `RunInDirBytes` `RunInDirWithEnv` can be easily refactored in next PR with a simple search & replace:
* before: `stdout, err := RunInDir(path)`
* next: `stdout, _, err := RunWithContextString(&git.RunContext{Dir:path})`
Other changes:
1. When `timeout <= 0`, use default. Because `timeout==0` is meaningless and could cause bugs. And now many functions becomes more simple, eg: `GitGcRepos` 9 lines to 1 line. `Fsck` 6 lines to 1 line.
2. Only set defaultCommandExecutionTimeout when the option `setting.Git.Timeout.Default > 0`
The last PR about clone buttons introduced an JS error when visiting an empty repo page:
* https://github.com/go-gitea/gitea/pull/19028
* `Uncaught ReferenceError: isSSH is not defined`, because the variables are scoped and doesn't share between sub templates.
This:
1. Simplify `templates/repo/clone_buttons.tmpl` and make code clear
2. Move most JS code into `initRepoCloneLink`
3. Remove unused `CloneLink.Git`
4. Remove `ctx.Data["DisableSSH"] / ctx.Data["ExposeAnonSSH"] / ctx.Data["DisableHTTP"]`, and only set them when is is needed (eg: deploy keys / ssh keys)
5. Introduce `Data["CloneButton*"]` to provide data for clone buttons and links
6. Introduce `Data["RepoCloneLink"]` for the repo clone link (not the wiki)
7. Remove most `ctx.Data["PageIsWiki"]` because it has been set in the `/wiki` middleware
8. Remove incorrect `quickstart` class in `migrating.tmpl`
This PR adds the necessary work to make it possible to create files on empty
repos using the API.
Fix#10993
Signed-off-by: Andrew Thornton <art27@cantab.net>
* remove the global methods but create dynamiclly
* Fix lint
* Fix windows lint
* Fix windows lint
* some improvements
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
There is a bug in the system webhooks whereby the active state is not checked when
webhooks are prepared and there is a bug that deactivating webhooks do not prevent
queued deliveries.
* Only add SystemWebhooks to the prepareWebhooks list if they are active
* At the time of delivery if the underlying webhook is not active mark it
as "delivered" but with a failed delivery so it does not get delivered.
Fix#19220
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Set the default branch for repositories generated from templates
* Allows default branch to be set through the API for repos generated from templates
* Update swagger API template
* Only set default branch to the one from the template if not specified
* Use specified default branch if it exists while generating git commits
Fix#19082
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
This PR adds a middleware which sets a ContextUser (like GetUserByParams before) in a single place which can be used by other methods. For routes which represent a repo or org the respective middlewares set the field too.
Also fix a bug in modules/context/org.go during refactoring.
- Make a restriction on which issues can be shown based on if you the user or team has write permission to the repository.
- Fixes a issue whereby you wouldn't see any associated issues with a specific team on a organization if you wasn't a member(fixed by zeroing the User{ID} in the options).
- Resolves#18913
When a new branch is pushed the old SHA is always listed as the empty sha and thus the compare link that is created does not work correctly.
Therefore when creating the compare link for new branches:
1. Attempt to get the parent of the first commit and use that as the basis
for the compare link.
2. If this is not possible make a comparison to the default branch
3. Finally if that is not possible simply do not show a compare link.
However, there are multiple broken compare links remaining therefore, in order for these to not break we will simply make the compare link redirect to the default branch.
Fix#19144
Signed-off-by: a1012112796 <1012112796@qq.com>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
* Clean paths when looking in Storage
Ensure paths are clean for minio aswell as local storage.
Use url.Path not RequestURI/EscapedPath in storageHandler.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
Co-authored-by: Lauris BH <lauris@nix.lv>
Extend issues/new/choose to pass the project id and change New Issue
link on project page to use new/choose
Fix#19170
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* Remove `db.DefaultContext` usage in routers, use `ctx` directly
* Use `ctx` directly if there is one, remove some `db.DefaultContext` in `services`
* Use ctx instead of db.DefaultContext for `cmd` and some `modules` packages
* fix incorrect context usage
- Don't panic when on
`/repos/issues/search?{created,assigned,mentioned,review_requested}=true`
when client didn't pass any authentication.
- Resolves#19115
Emails should not be sent to inactive users except for Activate and ResetPassword
messages.
Fix#18950
Signed-off-by: Andrew Thornton <art27@cantab.net>
If the mailer is configured then even if Manual confirm is set an activation email
is still being sent because `handleUserCreated` is not checking for this case.
Fix#17263
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* ignore missing comment for user notifications
* instead fix bug in notifications model
* use local variable instead
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: 6543 <6543@obermui.de>
Add new feature to delete issues and pulls via API
Co-authored-by: fnetx <git@fralix.ovh>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Gusted <williamzijl7@hotmail.com>
Co-authored-by: 6543 <6543@obermui.de>
* Fix page and missing return on unadopted repos API
Page must be 1 if it's not specified and it should return after sending an internal server error.
* Allow ignore pages
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Following the merging of #17811 teams can now have differing write and readonly permissions, however the assignee list will not include teams which have mixed perms.
Further the org sidebar is no longer helpful as it can't describe these mixed permissions situations.
Fix#18572
Signed-off-by: Andrew Thornton <art27@cantab.net>
We can't depend on `latest` version of gofumpt because the output will
not be stable across versions. Lock it down to the latest version
released yesterday and run it again.
* Fix display time of milestones
* Move the SecToTime function
From the models/issue_stopwatch.go file to the modules/util package
* Rename the sec_to_time file
* Updated formatting
* Include copyright notice in sec_to_time.go
* Apply PR review suggestions
- Update copyright notice dates to 2022
- Change `1 day 3h 5min 7s` to `1d 3h 5m 7s`
* Rename hrs var and combine conditions
* Update unit tests to match new time pattern
Changed `1min` to `1m`
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Add setting for a JSON that maps LDAP groups to Org Teams.
* Add log when removing or adding team members.
* Sync is being run on login and periodically.
* Existing group filter settings are reused.
* Adding and removing team members.
* Sync not existing LDAP group.
* Login with broken group map JSON.
This code adds a simple endpoint to apply patches to repositories and
branches on gitea. This is then used along with the conflicting checking
code in #18004 to provide a basic implementation of cherry-pick revert.
Now because the buttons necessary for cherry-pick and revert have
required us to create a dropdown next to the Browse Source button
I've also implemented Create Branch and Create Tag operations.
Fix#3880Fix#17986
Signed-off-by: Andrew Thornton <art27@cantab.net>
When migrating a repository (from GitHub) using the API (**POST** `repos/migrate`), the Code Indexer is not updated. Searching in the user interface will not return any results.
When migrating the same repository using **+/New Migration** in the web interface, the search index is updated and searching works as expected.
Caused by the fact that object `repo` is never updated with the migrated repo so `setting.Indexer.RepoIndexerEnabled && !repo.IsEmpty` in `modules/notification/indexer/indexer.go:NotifyMigrateRepository` always evaluates to `false`.
Tested with gitea:1.16.1, MariaDB:10, Breve in `Run Mode: Dev`.
* remove unnecessary web context data fields, and unify the i18n/translation related functions to `Locale`
* in development, show an error if a translation key is missing
* remove the unnecessary loops `for _, lang := range translation.AllLangs()` for every request, which improves the performance slightly
* use `ctx.Locale.Language()` instead of `ctx.Data["Lang"].(string)`
* add more comments about how the Locale/LangType fields are used
It appears that the blob-excerpt links do not work on the wiki - likely since their
introduction.
This PR adds support for the wiki on these links.
Signed-off-by: Andrew Thornton <art27@cantab.net>
There was an unfortunate regression in #17962 where following detection of the
UserProhibitLogin error the err is cast to a pointer by mistake.
This causes a panic due to an interface error.
Fix#18561
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Collaborator trust model should trust collaborators
There was an unintended regression in #17917 which leads to only
repository admin commits being trusted. This PR restores the old logic.
Fix#18501
Signed-off-by: Andrew Thornton <art27@cantab.net>
* COrrect use `UserID` in `SearchTeams`
- Use `UserID` in the `SearchTeams` function, currently it was useless
to pass such information. Now it does a INNER statement to `team_user`
which obtains UserID -> TeamID data.
- Make OrgID optional.
- Resolves#18484
* Seperate searching specific user
* Add condition back
* Use correct struct type
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Fix OAuth Source Edit Page to ensure restricted and group settings are set
* Also tolerate []interface in the groups
Fix#18432
Signed-off-by: Andrew Thornton <art27@cantab.net>
The endpoint /{username}/{reponame}/milestone/{id} is not currently restricted to
the repo. This PR restricts the milestones to those within the repo.
Signed-off-by: Andrew Thornton <art27@cantab.net>
- Pass the Global command args into serviceRPC.
- Fixes error with partial cloning.
- Add partial clone test
- Include diff
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Switch to non-deprecation setting
(Avoid by-default: "Deprecated fallback `[server]` `LFS_CONTENT_PATH` present. Use `[lfs]` `PATH` instead. This fallback will be removed in v1.18.0")
* Update all references
* Start adding mechanism to return unhandled data
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Create pushback interface
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add Pausable interface to WorkerPool and Manager
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Implement Pausable and PushBack for the bytefifos
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Implement Pausable and Pushback for ChannelQueues and ChannelUniqueQueues
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Wire in UI for pausing
Signed-off-by: Andrew Thornton <art27@cantab.net>
* add testcases and fix a few issues
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix build
Signed-off-by: Andrew Thornton <art27@cantab.net>
* prevent "race" in the test
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix jsoniter mismerge
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix conflicts
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix format
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Add warnings for no worker configurations and prevent data-loss with redis/levelqueue
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Use StopTimer
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* Add config option to hide issue events
Adds a config option `HIDE_ISSUE_EVENTS` to hide most issue events (changed labels, milestones, projects...) on the issue detail page.
If this is true, only the following events (comment types) are shown:
* plain comments
* closed/reopned/merged
* reviews
* Make configurable using a list
* Add docs
* Add missing newline
* Fix merge issues
* Allow changes per user settings
* Fix lint
* Rm old docs
* Apply suggestions from code review
* Use bitsets
* Rm comment
* fmt
* Fix lint
* Use variable/constant to provide key
* fmt
* fix lint
* refactor
* Add a prefix for user setting key
* Add license comment
* Add license comment
* Update services/forms/user_form_hidden_comments.go
Co-authored-by: Gusted <williamzijl7@hotmail.com>
* check len == 0
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: Gusted <williamzijl7@hotmail.com>
Co-authored-by: 6543 <6543@obermui.de>
* Refactor jwt.StandardClaims to RegisteredClaims
go-jwt/jwt has deprecated the StandardClaims interface to use RegisteredClaims
instead. This PR migrates to use this new format.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
Co-authored-by: Gusted <williamzijl7@hotmail.com>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Gusted <williamzijl7@hotmail.com>
Make router logger more friendly, show the related function name/file/line.
[BREAKING]
This PR substantially changes the logging format of the router logger. If you use this logging for monitoring e.g. fail2ban you will need to update this to match the new format.
This PR continues the work in #17125 by progressively ensuring that git
commands run within the request context.
This now means that the if there is a git repo already open in the context it will be used instead of reopening it.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Stop trimming preceding and suffixing spaces from editor filenames
In #5702 it was decided to trim preceding and suffixed spaces aswell as / from
editing file filenames. This was because at this point in time the url-safety of
Gitea was much poorer.
We can now drop this requirement and file editing should work correctly.
Fix#18176
Signed-off-by: Andrew Thornton <art27@cantab.net>
When generating the commits list and number of files changed for PRs and
compare we should use "..." always not "..".
Fix#18303
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Return nicer error if trying to pull from non-existent user
Gitea serv will currently return an 500 if we try to pull from a repository where
the owner does not exist.
This PR checks for the UserNotExist Error when checking for the user and will
return a NotFound error instead.
Fix#18225
