Commit graph

34 commits

Author SHA1 Message Date
silverwind b1cf7f4df1
Add class to page content to unify top margin (#13766)
* Add class to page content to unify top margin

Previously pages would individually set this margin but some didn't so
content would stick to the header without any space. Resolve this by
adding a new class that is added on all pages. The only place where we
remove this margin again is on the pages with menu or wrapper in the
header.

* fix admin notices

* fix team pages

* fix loading segment on gitgraph for arc-green

* fix last missing case

Co-authored-by: techknowlogick <techknowlogick@gitea.io>
2020-11-30 23:00:14 -05:00
Kyle Evans e461f0854f
[RFC] Make archival asynchronous (#11296)
* Make archival asynchronous

The prime benefit being sought here is for large archives to not
clog up the rendering process and cause unsightly proxy timeouts.
As a secondary benefit, archive-in-progress is moved out of the
way into a /tmp file so that new archival requests for the same
commit will not get fulfilled based on an archive that isn't yet
finished.

This asynchronous system is fairly primitive; request comes in, we'll
spawn off a new goroutine to handle it, then we'll mark it as done.
Status requests will see if the file exists in the final location,
and report the archival as done when it exists.

Fixes #11265

* Archive links: drop initial delay to three-quarters of a second

Some, or perhaps even most, archives will not take all that long to archive.
The archive process starts as soon as the download button is initially
clicked, so in theory they could be done quite quickly.  Drop the initial
delay down to three-quarters of a second to make it more responsive in the
common case of the archive being quickly created.

* archiver: restructure a little bit to facilitate testing

This introduces two sync.Cond pointers to the archiver package. If they're
non-nil when we go to process a request, we'll wait until signalled (at all)
to proceed. The tests will then create the sync.Cond so that it can signal
at-will and sanity-check the state of the queue at different phases.

The author believes that nil-checking these two sync.Cond pointers on every
archive processing will introduce minimal overhead with no impact on
maintainability.

* gofmt nit: no space around binary + operator

* services: archiver: appease golangci-lint, lock queueMutex

Locking/unlocking the queueMutex is allowed, but not required, for
Cond.Signal() and Cond.Broadcast().  The magic at play here is just a little
too much for golangci-lint, as we take the address of queueMutex and this is
mostly used in archiver.go; the variable still gets flagged as unused.

* archiver: tests: fix several timing nits

Once we've signaled a cond var, it may take some small amount of time for
the goroutines released to hit the spot we're wanting them to be at. Give
them an appropriate amount of time.

* archiver: tests: no underscore in var name, ungh

* archiver: tests: Test* is run in a separate context than TestMain

We must setup the mutex/cond variables at the beginning of any test that's
going to use it, or else these will be nil when the test is actually ran.

* archiver: tests: hopefully final tweak

Things got shuffled around such that we carefully build up and release
requests from the queue, so we can validate the state of the queue at each
step. Fix some assertions that no longer hold true as fallout.

* repo: Download: restore some semblance of previous behavior

When archival was made async, the GET endpoint was only useful if a previous
POST had initiated the download. This commit restores the previous behavior,
to an extent; we'll now submit the archive request there and return a
"202 Accepted" to indicate that it's processing if we didn't manage to
complete the request within ~2 seconds of submission.

This lets a client directly GET the archive, and gives them some indication
that they may attempt to GET it again at a later time.

* archiver: tests: simplify a bit further

We don't need to risk failure and use time.ParseDuration to get 2 *
time.Second.

else if isn't really necessary if the conditions are simple enough and lead
to the same result.

* archiver: tests: resolve potential source of flakiness

Increase all timeouts to 10 seconds; these aren't hard-coded sleeps, so
there's no guarantee we'll actually take that long. If we need longer to
not have a false-positive, then so be it.

While here, various assert.{Not,}Equal arguments are flipped around so that
the wording in error output reflects reality, where the expected argument is
second and actual third.

* archiver: setup infrastructure for notifying consumers of completion

This API will *not* allow consumers to subscribe to specific requests being
completed, just *any* request being completed. The caller is responsible for
determining if their request is satisfied and waiting again if needed.

* repo: archive: make GET endpoint synchronous again

If the request isn't complete, this endpoint will now submit the request and
wait for completion using the new API. This may still be susceptible to
timeouts for larger repos, but other endpoints now exist that the web
interface will use to negotiate its way through larger archive processes.

* archiver: tests: amend test to include WaitForCompletion()

This is a trivial one, so go ahead and include it.

* archiver: tests: fix test by calling NewContext()

The mutex is otherwise uninitialized, so we need to ensure that we're
actually initializing it if we plan to test it.

* archiver: tests: integrate new WaitForCompletion a little better

We can use this to wait for archives to come in, rather than spinning and
hoping with a timeout.

* archiver: tests: combine numQueued declaration with next-instruction assignment

* routers: repo: reap unused archiving flag from DownloadStatus()

This had some planned usage before, indicating whether this request
initiated the archival process or not. After several rounds of refactoring,
this use was deemed not necessary for much of anything and got boiled down
to !complete in all cases.

* services: archiver: restructure to use a channel

We now offer two forms of waiting for a request:
- WaitForCompletion: wait for completion with no timeout
- TimedWaitForCompletion: wait for completion with timeout

In both cases, we wait for the given request's cchan to close; in the latter
case, we do so with the caller-provided timeout. This completely removes the
need for busy-wait loops in Download/InitiateDownload, as it's fairly clean
to wait on a channel with timeout.

* services: archiver: use defer to unlock now that we can

This previously carried the lock into the goroutine, but an intermediate
step just added the request to archiveInProgress outside of the new
goroutine and removed the need for the goroutine to start out with it.

* Revert "archiver: tests: combine numQueued declaration with next-instruction assignment"

This reverts commit bcc5214023.

Revert "archiver: tests: integrate new WaitForCompletion a little better"

This reverts commit 9fc8bedb56.

Revert "archiver: tests: fix test by calling NewContext()"

This reverts commit 709c35685e.

Revert "archiver: tests: amend test to include WaitForCompletion()"

This reverts commit 75261f56bc.

* archiver: tests: first attempt at WaitForCompletion() tests

* archiver: tests: slight improvement, less busy-loop

Just wait for the requests to complete in order, instead of busy-waiting
with a timeout.  This is slightly less fragile.

While here, reverse the arguments of a nearby assert.Equal() so that
expected/actual are correct in any test output.

* archiver: address lint nits

* services: archiver: only close the channel once

* services: archiver: use a struct{} for the wait channel

This makes it obvious that the channel is only being used as a signal,
rather than anything useful being piped through it.

* archiver: tests: fix expectations

Move the close of the channel into doArchive() itself; notably, before these
goroutines move on to waiting on the Release cond.

The tests are adjusted to reflect that we can't WaitForCompletion() after
they've already completed, as WaitForCompletion() doesn't indicate that
they've been released from the queue yet.

* archiver: tests: set cchan to nil for comparison

* archiver: move ctx.Error's back into the route handlers

We shouldn't be setting this in a service, we should just be validating the
request that we were handed.

* services: archiver: use regex to match a hash

This makes sure we don't try and use refName as a hash when it's clearly not
one, e.g. heads/pull/foo.

* routers: repo: remove the weird /archive/status endpoint

We don't need to do this anymore, we can just continue POSTing to the
archive/* endpoint until we're told the download's complete. This avoids a
potential naming conflict, where a ref could start with "status/"

* archiver: tests: bump reasonable timeout to 15s

* archiver: tests: actually release timedReq

* archiver: tests: run through inFlight instead of manually checking

While we're here, add a test for manually re-processing an archive that's
already been complete. Re-open the channel and mark it incomplete, so that
doArchive can just mark it complete again.

* initArchiveLinks: prevent default behavior from clicking

* archiver: alias gitea's context, golang context import pending

* archiver: simplify logic, just reconstruct slices

While the previous logic was perhaps slightly more efficient, the
new variant's readability is much improved.

* archiver: don't block shutdown on waiting for archive

The technique established launches a goroutine to do the wait,
which will close a wait channel upon termination. For the timeout
case, we also send back a value indicating whether the timeout was
hit or not.

The timeouts are expected to be relatively small, but still a multi-
second delay to shutdown due to this could be unfortunate.

* archiver: simplify shutdown logic

We can just grab the shutdown channel from the graceful manager instead of
constructing a channel to halt the caller and/or pass a result back.

* Style issues

* Fix mis-merge

Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
2020-11-07 22:27:28 +02:00
silverwind 4617bb689b
Misc UI fixes, add secondary color (#13378)
* Misc UI fixes, add secondary color

- Add secondary color, primarily used in arc-green currently
- Convert icons on release page to SVG
- Improve resolved conversation placeholder
- Diff fixes on arc-green
- Misc color tweaks

* fix comment header, adjust arc-green dropzone

* label margin, sidebar margin

* flexbox commits table and add primary button styles

* tooltip styles

* file header fixes

Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: zeripath <art27@cantab.net>
2020-11-01 15:04:26 -05:00
silverwind c5020cff3d
Various UI and arc-green fixes (#13291)
- introduce variable for border-radius value
- fix some white borders in arc-green
- add text selection and placeholder in arc-green
- tweak branch list footer
- more things I forgot

Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: zeripath <art27@cantab.net>
2020-10-24 15:15:29 -04:00
silverwind 83106c166d
Replace footer and modal icons with SVG (#13245)
- Replace two font icons with SVG in the footer
- Replace icons in delete modals with SVG
- Horizontally center message text in modals
2020-10-21 22:07:33 +01:00
silverwind ffddf3f8a6
Make SVG size argument optional (#12814)
Now defaults to 16 on both frontend and backend.

Co-authored-by: techknowlogick <techknowlogick@gitea.io>
2020-09-11 16:19:00 -04:00
赵智超 b613d70b41
ui: Show git-pull-request icon for closed pull request (#12742)
As title, I think it's more reasonable, and it's the same as GH.

Signed-off-by: a1012112796 <1012112796@qq.com>
2020-09-06 11:00:16 -04:00
Kyle Evans 38cd9ba47b
Allow unauthenticated users to compare (#11240)
* routers: make /compare route available to unauthenticated users

Remove some bits of the compare interface if the user isn't signed in.
Notably, they don't need to see the "New Pull Request" button box nor the
hidden form that would fail to submit due to the POST request continuing to
require proper privileges.

Follow-up commits will improve the UI a bit around this, removing some
"Pull Request" verbiage in favor of "Compare."

* ui: home: show "compare" button for unauthenticated users

This change requires pulling in the BaseRepo unconditionally and
recording if the pull request is in-fact not allowed
(.PullRequestCtx.Allowed). If the user isn't allowed to create a pull
request, either because this isn't a fork or same-fork branch PRs aren't
allowed, then we'll name the button "Compare" instead of "Pull Request."

* ui: branch list: use the new Compare language when available

When viewing the branch listing as an unauthenticated user, you'll get
"Pull Request" buttons. use the new "Compare" verbiage instead, which
matches GitHub behavior when you can't issue a pull request from the
branches.

Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: guillep2k <18600385+guillep2k@users.noreply.github.com>
2020-05-04 19:44:30 -03:00
赵智超 6e4baee91d
ui: fix status label on branches list vertical alignment (#11109)
change status icon for merged PR to git-merge

Signed-off-by: a1012112796 <1012112796@qq.com>
2020-04-17 12:35:12 -04:00
John Olheiser 86fdba177a
Add Octicon SVG spritemap (#10107)
* Add octicon SVG sprite

Signed-off-by: jolheiser <john.olheiser@gmail.com>

* Static prefix

Signed-off-by: jolheiser <john.olheiser@gmail.com>

* SVG for all repo icons

Signed-off-by: jolheiser <john.olheiser@gmail.com>

* make vendor

Signed-off-by: jolheiser <john.olheiser@gmail.com>

* Swap out octicons

Signed-off-by: jolheiser <john.olheiser@gmail.com>

* Move octicons to top of less imports

Signed-off-by: jolheiser <john.olheiser@gmail.com>

* Fix JS

Signed-off-by: jolheiser <john.olheiser@gmail.com>

* Definitely not a search/replace

Signed-off-by: jolheiser <john.olheiser@gmail.com>

* Missed regex

Signed-off-by: jolheiser <john.olheiser@gmail.com>

* Move to more generic calls and webpack

Signed-off-by: jolheiser <john.olheiser@gmail.com>

* make svg -> make webpack

Signed-off-by: jolheiser <john.olheiser@gmail.com>

* Remove svg-sprite

Signed-off-by: jolheiser <john.olheiser@gmail.com>

* Update tests

Signed-off-by: jolheiser <john.olheiser@gmail.com>

* Missed a test

Signed-off-by: jolheiser <john.olheiser@gmail.com>

* Remove svg from makefile

Signed-off-by: jolheiser <john.olheiser@gmail.com>

* Suggestions

Signed-off-by: jolheiser <john.olheiser@gmail.com>

* Attempt to fix test

Signed-off-by: jolheiser <john.olheiser@gmail.com>

* Update tests

Signed-off-by: jolheiser <john.olheiser@gmail.com>

* Revert timetracking test

Signed-off-by: jolheiser <john.olheiser@gmail.com>

* Swap .octicon for .svg in less

Signed-off-by: jolheiser <john.olheiser@gmail.com>

* Add aria-hidden

Signed-off-by: jolheiser <john.olheiser@gmail.com>

* Replace mega-octicon

Signed-off-by: jolheiser <john.olheiser@gmail.com>

* Fix webpack globbing on Windows

Signed-off-by: jolheiser <john.olheiser@gmail.com>

* Revert

Co-Authored-By: silverwind <me@silverwind.io>

* Fix octions from upstream

Signed-off-by: jolheiser <john.olheiser@gmail.com>

* Fix Vue and missed JS function

Signed-off-by: jolheiser <john.olheiser@gmail.com>

* Add JS helper and PWA

Signed-off-by: jolheiser <john.olheiser@gmail.com>

* Preload SVG

Signed-off-by: jolheiser <john.olheiser@gmail.com>

Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: techknowlogick <matti@mdranta.net>
2020-02-11 12:02:41 -05:00
Lunny Xiao 3ccd271081
Fix branch page pull request title and link error (#10092)
* Fix branch page pull request title and link error

* Fix ui
2020-02-01 15:54:25 +02:00
zeripath e5d8e2d10c
Branches not at ref commit ID should not be listed as Merged (#9614)
Once a branch has been merged if the commit ID no longer equals that of
the pulls ref commit id don't offer to delete the branch on the pull screen
and don't list it as merged on branches.

Fix #9201

When looking at the pull page we should also get the commits from the refs/pulls/x/head

Fix #9158
2020-01-07 17:06:14 +00:00
Vedran 4f9443cf8e Button tooltip formatting under Branches (#9034)
* Fixes button tooltip formatting under Branches

* Formatting on download button for default branch
2019-11-16 12:03:07 +00:00
6543 733c898a90 [Branch View] Add Included TAG (#8449)
* included message

* add property IsIncluded

* Add Orange Lable
2019-10-14 23:40:17 +01:00
6543 5409dec8fd [Branch View] show "New Pull Request" Button only if posible (#7977)
* add check Commits Ahead is gt 0

* code format
to start drone-ci test again
and formate code is also nice :)
2019-08-26 13:47:41 +03:00
6543 d974c139b4 sugestion to use range .Branches (#7674)
d57973a804
2019-07-30 23:02:58 +08:00
6543 23e8cff08c hide delete/restor button on archived repos (#7658)
close issue #7653
2019-07-29 13:00:43 +08:00
6543 31a1fe175f [Branch View] add download button (#7604)
* add download-button info message

* add overflow-visible css for table colum class

* right colum is always there

* add download button for default branch

* add download button for all other branchs

* resize table colum so two buttons fit in

* code indent avter rebase

* show commit divergence corect
https://github.com/go-gitea/gitea/issues/7625

* changes because of merge master into ...

* optimize if statement for protected branches

* dont downloat a deleted branch - fix error 404
2019-07-29 10:27:05 +08:00
6543 a19138c1d3 [Branch View] Protection Symbole (delete dublicate) (#7624)
* delet protectin symbol on "action column"

* code format
2019-07-27 22:11:14 +08:00
6543 0b1a4c38d9 [Branch View] Delete Table Header (#7622)
* add class trom table header to table body

* remove table header
2019-07-26 12:21:14 +01:00
6543 bebc6a3c77 [Branch View] icons to buttons (#7602)
* add restore-button info message

* branch deltete undo icon to button

* branch deltete icon to button
2019-07-26 01:01:25 +01:00
Gary Kim 3cba42c43d Make default branch name link to default branch (#7519)
The default branch's name on the branches page
for a repo was previously simply text and did
not link anywhere.

The name is now a link to the default branch
just like the non-default branch names.

Signed-off-by: Gary Kim <gary@garykim.dev>
2019-07-18 12:39:51 -04:00
Gary Kim c8aa46d27b Add Extra Info to Branches Page (#7461)
* Add branch protection information to branches page

This change will add a tag on the ui that indicates
whether a branch is protected on the repository
branches page.

Signed-off-by: Gary Kim <gary@garykim.dev>

* Add last commit information to repo branches page

This change adds the ID and commit message of the last
commit on a branch to the branches page for repositories.

Signed-off-by: Gary Kim <gary@garykim.dev>

* Make branch page commit message truncate in css rather then template

The truncating of commit messages shown under branches
in the repository branches page has been moved to using
css rather then the Go template as the template was causing
some issues when the commit messaged had a link when rendered.

This commit also makes the commit message paragraph itself
use flex in order to make managing its elements easier.

Signed-off-by: Gary Kim <gary@garykim.dev>
2019-07-17 16:02:41 -04:00
Gary Kim 072bdfa3f5 Only show "New Pull Request" button if repo allows pulls (#7426)
Signed-off-by: Gary Kim <gary@garykim.dev>
2019-07-11 16:21:16 -04:00
Mario Lubenka 7c0f2b9843 Show Pull Request button or status of latest PR in branch list (#6990)
* Show Pull Request button or status of latest PR in branch list

Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>

* Do not show pull request button on deleted branches

Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>

* Do not show commit divergence on deleted branches

Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>

* Use XORMs Get instead of limit

* Links pull request ID and use smaller labels for displaying the pull request status

Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>

* Handle error when getting latest pull request

Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>

* Indent template

Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>

* Check error when loading issue

Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
2019-06-27 22:15:30 +08:00
Mario Lubenka 55a8e12d85 Number of commits ahead/behind in branch overview (#6695)
* Call Git API to determine divergence of a branch and its base branch

Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>

* Show commit divergance in branch list

Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>

* Adds missing comment

Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>

* Adds test for diverging commits

Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>

* Try comparing commits instead of branches

Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>

* Removes test as CI can't run it

Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>

* Adjusts signature of percentage function to allow providing multiple integers as numerator

Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>

* Moves CountDivergingCommits function into repofiles module

Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
2019-05-05 19:25:25 +03:00
Harshit Bansal dd006db5a7 Display branch name in delete branch confirmation modal. (#5654)
Fixes: #5630.
2019-01-06 15:08:25 -05:00
nubenum 756eafaaf6 Fix some issues with special chars in branch names (#3767)
Signed-off-by: Robin Durner <github@nubenum.de>
2018-09-17 01:28:23 +03:00
Joel da Rosa 91373901f6 Prevent html entity escaping (#4471) 2018-07-19 18:25:17 +03:00
bugreport0 bac6d05e78 Improve English grammar and consistency. (#3614)
* Start improving English grammar and consistency.

* Apply review comments, push translation further.

* Additional review changes; expand translation.

* Undo team/organization change, further translation.

* Add site administration; review comments; merge.

* Update hardcoded branch protection string tests.

* Update hardcoded branch deletion string test.

* Update another hardcoded translation string test.

* Add my nickname to the list of translators.

* Implement @lafriks review comments.

* Remove (now) unused branch deletion warnings.

* Remove (now) unused branch deletion warnings.
2018-04-19 17:24:31 +03:00
Bwko 38a9cda4bb Remove unnecessary Safe tags (#3778) 2018-04-10 06:43:37 +03:00
Bo-Yi Wu fc265b036f feat: Add branch link in branch list. (#3576) 2018-02-24 23:17:59 +02:00
Lunny Xiao f2e20c81b6 Refactor struct's time to remove unnecessary memory usage (#3142)
* refactor struct's time to remove unnecessary memory usage

* use AsTimePtr simple code

* fix tests

* fix time compare

* fix template on gpg

* use AddDuration instead of Add
2017-12-11 06:37:04 +02:00
Bwko 3ab580c8d6 Add branch overiew page (#2108)
* Add branch overiew page

* fix changed method name on sub menu

* remove unused code
2017-10-26 08:49:16 +08:00