mirrors/embedded-trainings-2020
1
0
Fork 0
mirror of https://github.com/ferrous-systems/embedded-trainings-2020.git synced 2024-10-31 22:28:49 +00:00
Code Issues Projects Releases Wiki Activity
embedded-trainings-2020/boards/dongle
History
Jorge Aparicio eae0da0153 update hex files
2020-07-13 16:56:04 +02:00
..
.cargo squashed 2020-06-09 11:58:27 +02:00
loopback.hex update hex files 2020-07-13 16:56:04 +02:00
loopback.rs update hex files 2020-07-13 16:56:04 +02:00
memory.x squashed 2020-06-09 11:58:27 +02:00
puzzle.hex update hex files 2020-07-13 16:56:04 +02:00
puzzle.rs update hex files 2020-07-13 16:56:04 +02:00
README.md squashed 2020-06-09 11:58:27 +02:00

README.md

dongle

Pre-made applications for the nRF52840 Dongle.

These applications will be used in the beginner workshop.

Getting familiar with the hardware

TODO review for accessibility

LEDs

  • The green LED (LD1) is connected to pin P0.6
  • The red channel of the RGB LED (LD2) is connected to pin P0.8
  • The green channel of the RGB LED (LD2) is connected to pin P1.9
  • The blue channel of the RGB LED (LD2) is connected to pin P0.12

Both LEDs are mounted near the USB connector.

Buttons

  • The Reset button is mounted sideways near the edge of the board that's opposite of the USB connector.
  • The SW1 button is connected to pin P1.06. This round-ish button is right next to the RESET button but closer to the USB connector.

References