mirror of
https://github.com/ferrous-systems/embedded-trainings-2020.git
synced 2024-05-28 21:28:20 +00:00
46 lines
1.9 KiB
Markdown
46 lines
1.9 KiB
Markdown
|
# `cargo-flash` is not working
|
||
|
|
||
|
## Debug power request failed
|
||
|
|
||
|
``` console
|
||
|
$ cargo flash --chip nRF52840_xxAA --bin hello
|
||
|
ERROR probe_rs::architecture::arm::communication_interface > Debug power request failed
|
||
|
Error processing command: An error specific to the selected architecture occured
|
||
|
```
|
||
|
|
||
|
This is a spurious error that occurs only once on a new development kit. Running the command again should make the error go away. If you still get the error run `RUST_LOG=probe_rs=debug cargo flash --chip nRF52840_xxAA --bin hello ` once.
|
||
|
|
||
|
## 'erase_sector' failed with code 1
|
||
|
|
||
|
``` console
|
||
|
$ cargo flash --chip nRF52840_xxAA --bin hello
|
||
|
(..)
|
||
|
Error failed to flash app: The execution of 'erase_sector' failed with code 1
|
||
|
```
|
||
|
|
||
|
flash write protection is enabled in the device. To disable it use the `nrf-recover` tool. Instructions can be found in the [setup page](https://oxidizeconf.com/oxidize-global-setup/) and in the top-level README of this repository.
|
||
|
|
||
|
## Linux permissions
|
||
|
|
||
|
``` console
|
||
|
$ cargo flash --chip nRF52840_xxAA --bin hello
|
||
|
Error: An error specific to a probe type occured: USB error while opening USB device: Access denied (insufficient permissions)
|
||
|
|
||
|
Caused by:
|
||
|
USB error while opening USB device: Access denied (insufficient permissions)
|
||
|
```
|
||
|
|
||
|
udev rules need to be changed to allow non-root access. Instructions can be found in the [setup page](https://oxidizeconf.com/oxidize-global-setup/) and in the top-level README of this repository.
|
||
|
|
||
|
## Wrong Windows Driver
|
||
|
|
||
|
``` console
|
||
|
$ cargo flash --chip nRF52840_xxAA --bin hello
|
||
|
Error: An error specific to a probe type occured: USB error while opening USB device: Entity not found
|
||
|
|
||
|
Caused by:
|
||
|
USB error while opening USB device: Entity not found
|
||
|
```
|
||
|
|
||
|
You need to bind the BULK interface of the J-Link USB device to the WinUSB driver using the Zadig tool. Instructions can be found in the [setup page](https://oxidizeconf.com/oxidize-global-setup/) and in the top-level README of this repository.
|