At the end of program `usb-1` we received a EP0SETUP event. This event signals the *end* of the SETUP stage of a control transfer. The nRF52840 USBD peripheral will automatically receive the SETUP data and store it in the registers BMREQUESTTYPE, BREQUEST, WVALUE{L,H}, WINDEX{L,H} and WLENGTH{L,H}.
Modify `Request::parse()` in `advanced/common/usb/src/lib.rs` to recognize a GET_DESCRIPTOR request of type DEVICE so that the `get_descriptor_device` test passes. Note that the parser already handles SET_ADDRESS requests.
When you need to write some `no_std` code that does not involve device-specific I/O you should consider writing it as a separate crate. This way, you can test it on your development machine (e.g. `x86_64`) using the standard `cargo test` functionality.
So that's what we'll do here. In `advanced/common/usb/lib.rs` you'll find starter code for writing a `no_std` SETUP data parser. The starter code contains some unit tests; you can run them with `cargo test` (from within the `usb` folder) or you can use Rust Analyzer's "Test" button in VS code.
The definition of `Descriptor::Configuration` as well as the associated test has been "commented out" using an `#[cfg(TODO)]` attribute because it is not handled by the firmware yet. Delete the `#[cfg(TODO)]` so that the unit tests can access it. This pattern is used for enum members and test functions throughout this workshop, so keep it in mind should you see it again.
Check section 9.4.3 of the [USB specification][usb_spec] for a very detailed description of the requests. All the constants we'll be using are also described in Tables 9-3, 9-4 and 9-5 of the same document.
**4. Remember that you can define binary literals by prefixing them with `0b`.**
**5. You can use bit shifts (`>>`) and casts (`as u8`) to get the high/low bytes of `wValue`.**
- for a mapping of register names to the `USBD` API, check the entry for `nrf52840_hal::target::usbd` in the documentation you've created using `cargo doc`
- let bmrequesttype = usbd.bmrequesttype.read().bits() as u8;
- remember that we've learned how to read registers in `events.rs`.
- you will need to put together the higher and lower bits of `wlength`, `windex` and `wvalue` to get the whole field
- > Note: If you're using a Mac, you need to catch `SetAddress` requests returned by the parser as these are sent before the first GetDescriptor request. You can handle them by doing nothing.
**Expected Result:**
When you have successfully received a GET_DESCRIPTOR request for a Device descriptor you are done. You should see an output like this:
> Note: `wlength` / `length` can vary depending on the OS, USB port (USB 2.0 vs USB 3.0) or the presence of a USB hub so you may see a different value.
