diff --git a/components/mch2022-efuse/CMakeLists.txt b/components/mch2022-efuse/CMakeLists.txt new file mode 100644 index 0000000..143da2a --- /dev/null +++ b/components/mch2022-efuse/CMakeLists.txt @@ -0,0 +1,6 @@ +idf_component_register( + SRCS "esp_efuse_custom_table.c" "efuse.c" + INCLUDE_DIRS "." + "include" + REQUIRES "spi_flash" +) diff --git a/efuse/main/main.c b/components/mch2022-efuse/efuse.c similarity index 67% rename from efuse/main/main.c rename to components/mch2022-efuse/efuse.c index af825db..84242a1 100644 --- a/efuse/main/main.c +++ b/components/mch2022-efuse/efuse.c @@ -8,7 +8,38 @@ #include "esp_efuse_table.h" #include "esp_efuse_custom_table.h" -void print_state() { +static const char *TAG = "efuse"; + +void halt(const char* reason) { + ESP_LOGE(TAG, "Failed efuse write operation: %s", reason); + while (true) { + vTaskDelay(1000 / portTICK_PERIOD_MS); + } +} + +void efuse_protect() { + // XPD settings + if (esp_efuse_write_field_bit(ESP_EFUSE_XPD_SDIO_REG) != ESP_OK) halt("XPD_SDIO_REG"); // Enable the VDD_SDIO voltage regulator + if (esp_efuse_write_field_bit(ESP_EFUSE_SDIO_TIEH) != ESP_OK) halt("SDIO_TIEH"); // Set VDD_SDIO voltage regulator output to 3.3v + if (esp_efuse_write_field_bit(ESP_EFUSE_SDIO_FORCE) != ESP_OK) halt("SDIO_FORCE"); // Enable VDD_SDIO efuse override + + // Debug settings + if (esp_efuse_write_field_bit(ESP_EFUSE_CONSOLE_DEBUG_DISABLE) != ESP_OK) halt("CONSOLE_DEBUG_DISABLE"); // Disable BASIC ROM console + + // Write protect + if (esp_efuse_write_field_bit(ESP_EFUSE_WR_DIS_FLASH_CRYPT_CNT) != ESP_OK) halt("WR_DIS_FLASH_CRYPT_CNT"); // Prevent disabling UART download mode + if (esp_efuse_write_field_bit(ESP_EFUSE_WR_DIS_MAC_AND_CHIP_INFO) != ESP_OK) halt("WR_DIS_MAC_AND_CHIP_INFO"); // Prevent writing to MAC address fuses + if (esp_efuse_write_field_bit(ESP_EFUSE_WR_DIS_XPD) != ESP_OK) halt("WR_DIS_XPD"); // Write protect XPD settings + if (esp_efuse_write_field_bit(ESP_EFUSE_WR_DIS_SPI_PAD) != ESP_OK) halt("WR_DIS_SPI_PAD"); // Pin mapping for SPI flash and PSRAM + if (esp_efuse_write_field_bit(ESP_EFUSE_WR_DIS_SCHEME_KEY_CRYPT) != ESP_OK) halt("WR_DIS_SCHEME_KEY_CRYPT"); // Disable flash encryption + if (esp_efuse_write_field_bit(ESP_EFUSE_WR_DIS_ABS_DONE_0) != ESP_OK) halt("WR_DIS_ABS_DONE_0"); // Disable secure boot V1 + if (esp_efuse_write_field_bit(ESP_EFUSE_WR_DIS_ABS_DONE_1) != ESP_OK) halt("WR_DIS_ABS_DONE_1"); // Disable secure boot V2 + if (esp_efuse_write_field_bit(ESP_EFUSE_WR_DIS_CONSOLE_DEBUG_AND_DISABLE_DL_CRYPT) != ESP_OK) halt("WR_DIS_CONSOLE_DEBUG_AND_DISABLE_DL_CRYPT"); // Write protect download mode functions + if (esp_efuse_write_field_bit(ESP_EFUSE_WR_DIS_BLK3) != ESP_OK) halt("WR_DIS_BLK3"); // Write protect block 3 (to prevent changing MAC version) + if (esp_efuse_write_field_bit(ESP_EFUSE_WR_DIS_EFUSE_RD_DISABLE) != ESP_OK) halt("WR_DIS_EFUSE_RD_DISABLE"); // Write protect read disable and ADC vref +} + +void efuse_print_state() { esp_chip_info_t chip_info; esp_chip_info(&chip_info); uint8_t mac_address[6]; @@ -72,7 +103,3 @@ void print_state() { printf("Read disabled for EFUSE block 3: %s\n", rd_blk3 ? "yes" : "no"); fflush(stdout); } - -void app_main(void) { - print_state(); -} diff --git a/efuse/main/esp_efuse_custom_table.c b/components/mch2022-efuse/esp_efuse_custom_table.c similarity index 100% rename from efuse/main/esp_efuse_custom_table.c rename to components/mch2022-efuse/esp_efuse_custom_table.c diff --git a/efuse/main/esp_efuse_custom_table.csv b/components/mch2022-efuse/esp_efuse_custom_table.csv similarity index 100% rename from efuse/main/esp_efuse_custom_table.csv rename to components/mch2022-efuse/esp_efuse_custom_table.csv diff --git a/components/mch2022-efuse/include/efuse.h b/components/mch2022-efuse/include/efuse.h new file mode 100644 index 0000000..906f19c --- /dev/null +++ b/components/mch2022-efuse/include/efuse.h @@ -0,0 +1,4 @@ +#pragma once + +void efuse_print_state(); +void efuse_protect(); diff --git a/efuse/main/include/esp_efuse_custom_table.h b/components/mch2022-efuse/include/esp_efuse_custom_table.h similarity index 100% rename from efuse/main/include/esp_efuse_custom_table.h rename to components/mch2022-efuse/include/esp_efuse_custom_table.h diff --git a/efuse/.gitignore b/efuse/.gitignore deleted file mode 100644 index a6dc616..0000000 --- a/efuse/.gitignore +++ /dev/null @@ -1,2 +0,0 @@ -sdkconfig.old -build \ No newline at end of file diff --git a/efuse/CMakeLists.txt b/efuse/CMakeLists.txt deleted file mode 100644 index d24758e..0000000 --- a/efuse/CMakeLists.txt +++ /dev/null @@ -1,6 +0,0 @@ -# The following lines of boilerplate have to be in your project's -# CMakeLists in this exact order for cmake to work correctly -cmake_minimum_required(VERSION 3.5) - -include($ENV{IDF_PATH}/tools/cmake/project.cmake) -project(appfs-test) diff --git a/efuse/Makefile b/efuse/Makefile deleted file mode 100644 index 5108515..0000000 --- a/efuse/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# This is a project Makefile. It is assumed the directory this Makefile resides in is a -# project subdirectory. -# - -PROJECT_NAME := hello-world - -include $(IDF_PATH)/make/project.mk diff --git a/efuse/burn.sh b/efuse/burn.sh deleted file mode 100755 index 816ccc9..0000000 --- a/efuse/burn.sh +++ /dev/null @@ -1,39 +0,0 @@ -#!/bin/bash - -set -e # Exit script on error - -if [ "$#" -ne 1 ]; then - echo "Usage: $0 " - exit 1 -fi - -PORT=$1 - -echo "Burning e-fuses for MCH2022 badge on port $PORT..." - -# Set the flash/psram voltage to 3.3V -espefuse.py --port $PORT --do-not-confirm set_flash_voltage 3.3V # Ignore GPIO12 (MTDI) and force flash/psram voltage (using XPD efuses) - -# Write protect the basic system settings -espefuse.py --port $PORT --do-not-confirm write_protect_efuse MAC # Disables writing to MAC, MAC_CRC, CIP_VER_REV1, CHIP_VERSION, CHIP_PACKAGE fuses -espefuse.py --port $PORT --do-not-confirm write_protect_efuse CODING_SCHEME # Disables writing to CODING_SCHEME, KEY_STATUS, FLASH_CRYPT_CONFIG, BLK3_PART_RESERVE - -# Write protect the XPD fuses -espefuse.py --port $PORT --do-not-confirm write_protect_efuse XPD_SDIO_FORCE # Disables writing to XPD_SDIO_FORCE, XPD_SDIO_REG and XPD_SDIO_TIEH - -# Write protect the SPI pad fuses -espefuse.py --port $PORT --do-not-confirm write_protect_efuse SPI_PAD_CONFIG_CLK # Disables writing to CHIP_VER_REV2 and all SPI_PAD_CONFIG_X fuses - -# Write protect the JTAG disable fuse (don't allow people to disable JTAG) -espefuse.py --port $PORT --do-not-confirm write_protect_efuse JTAG_DISABLE - -# Disable the BASIC ROM console (it causes problems with waking up from deep sleep) -espefuse.py --port $PORT --do-not-confirm burn_efuse CONSOLE_DEBUG_DISABLE - -# Write protect the download mode disable efuse -espefuse.py --port $PORT --do-not-confirm write_protect_efuse UART_DOWNLOAD_DIS # Disables writing to FLASH_CRYPT_CNT, UART_DOWNLOAD_DIS and EFUSE_WR_DIS_FLASH_CRYPT_CNT - -# Write protect the secure boot fuses (don't allow people to enable secure boot) -espefuse.py --port $PORT --do-not-confirm write_protect_efuse DISABLE_DL_ENCRYPT # Disables writing to CONSOLE_DEBUG_DISABLE, DISABLE_DL_ENCRYPT, DISABLE_DL_DECRYPT and DISABLE_DL_CACHE -espefuse.py --port $PORT --do-not-confirm write_protect_efuse ABS_DONE_0 -espefuse.py --port $PORT --do-not-confirm write_protect_efuse ABS_DONE_1 diff --git a/efuse/main/CMakeLists.txt b/efuse/main/CMakeLists.txt deleted file mode 100644 index b07c15e..0000000 --- a/efuse/main/CMakeLists.txt +++ /dev/null @@ -1,6 +0,0 @@ -idf_component_register( - SRCS "main.c" - "esp_efuse_custom_table.c" - INCLUDE_DIRS "." - "include" -) diff --git a/efuse/main/component.mk b/efuse/main/component.mk deleted file mode 100644 index a98f634..0000000 --- a/efuse/main/component.mk +++ /dev/null @@ -1,4 +0,0 @@ -# -# "main" pseudo-component makefile. -# -# (Uses default behaviour of compiling all source files in directory, adding 'include' to include path.) diff --git a/efuse/partitions.csv b/efuse/partitions.csv deleted file mode 100644 index 71f75da..0000000 --- a/efuse/partitions.csv +++ /dev/null @@ -1,7 +0,0 @@ -# Name, Type, SubType, Offset, Size, Flags -nvs, data, nvs, 0x9000, 0x4000 -otadata, data, ota, 0xd000, 0x2000 -phy_init, data, phy, 0xf000, 0x1000 -ota_0, 0, ota_0, 0x10000, 1856K -ota_1, 0, ota_1, , 1856K -locfd, data, fat, , 12608K diff --git a/efuse/sdkconfig b/efuse/sdkconfig deleted file mode 100644 index ac3058f..0000000 --- a/efuse/sdkconfig +++ /dev/null @@ -1,1581 +0,0 @@ -# -# Automatically generated file. DO NOT EDIT. -# Espressif IoT Development Framework (ESP-IDF) Project Configuration -# -CONFIG_SOC_BROWNOUT_RESET_SUPPORTED="Not determined" -CONFIG_SOC_TWAI_BRP_DIV_SUPPORTED="Not determined" -CONFIG_SOC_CAPS_ECO_VER_MAX=3 -CONFIG_SOC_ADC_SUPPORTED=y -CONFIG_SOC_DAC_SUPPORTED=y -CONFIG_SOC_MCPWM_SUPPORTED=y -CONFIG_SOC_SDMMC_HOST_SUPPORTED=y -CONFIG_SOC_BT_SUPPORTED=y -CONFIG_SOC_CLASSIC_BT_SUPPORTED=y -CONFIG_SOC_PCNT_SUPPORTED=y -CONFIG_SOC_WIFI_SUPPORTED=y -CONFIG_SOC_SDIO_SLAVE_SUPPORTED=y -CONFIG_SOC_TWAI_SUPPORTED=y -CONFIG_SOC_EMAC_SUPPORTED=y -CONFIG_SOC_CPU_CORES_NUM=2 -CONFIG_SOC_ULP_SUPPORTED=y -CONFIG_SOC_CCOMP_TIMER_SUPPORTED=y -CONFIG_SOC_EFUSE_SECURE_BOOT_KEY_DIGESTS=y -CONFIG_SOC_RTC_FAST_MEM_SUPPORTED=y -CONFIG_SOC_RTC_SLOW_MEM_SUPPORTED=y -CONFIG_SOC_I2S_SUPPORTED=y -CONFIG_SOC_RMT_SUPPORTED=y -CONFIG_SOC_SIGMADELTA_SUPPORTED=y -CONFIG_SOC_ADC_RTC_CTRL_SUPPORTED=y -CONFIG_SOC_ADC_DIG_CTRL_SUPPORTED=y -CONFIG_SOC_ADC_PERIPH_NUM=2 -CONFIG_SOC_ADC_MAX_CHANNEL_NUM=10 -CONFIG_SOC_ADC_DIGI_CONTROLLER_NUM=2 -CONFIG_SOC_ADC_PATT_LEN_MAX=16 -CONFIG_SOC_ADC_DIGI_MIN_BITWIDTH=9 -CONFIG_SOC_ADC_DIGI_MAX_BITWIDTH=12 -CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_HIGH=2 -CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_LOW=2000 -CONFIG_SOC_ADC_MAX_BITWIDTH=12 -CONFIG_SOC_CPU_BREAKPOINTS_NUM=2 -CONFIG_SOC_CPU_WATCHPOINTS_NUM=2 -CONFIG_SOC_CPU_WATCHPOINT_SIZE=64 -CONFIG_SOC_CPU_HAS_FPU=y -CONFIG_SOC_DAC_PERIPH_NUM=2 -CONFIG_SOC_DAC_RESOLUTION=8 -CONFIG_SOC_GPIO_PORT=1 -CONFIG_SOC_GPIO_PIN_COUNT=40 -CONFIG_SOC_GPIO_VALID_GPIO_MASK=0xFFFFFFFFFF -CONFIG_SOC_GPIO_SUPPORT_SLP_SWITCH=y -CONFIG_SOC_I2C_NUM=2 -CONFIG_SOC_I2C_FIFO_LEN=32 -CONFIG_SOC_I2C_SUPPORT_APB=y -CONFIG_SOC_I2S_NUM=2 -CONFIG_SOC_I2S_SUPPORTS_PDM_TX=y -CONFIG_SOC_I2S_SUPPORTS_PDM_RX=y -CONFIG_SOC_I2S_SUPPORTS_ADC=y -CONFIG_SOC_I2S_SUPPORTS_DAC=y -CONFIG_SOC_I2S_SUPPORTS_APLL=y -CONFIG_SOC_I2S_APLL_MIN_FREQ=250000000 -CONFIG_SOC_I2S_APLL_MAX_FREQ=500000000 -CONFIG_SOC_I2S_APLL_MIN_RATE=10675 -CONFIG_SOC_I2S_TRANS_SIZE_ALIGN_WORD=y -CONFIG_SOC_I2S_LCD_I80_VARIANT=y -CONFIG_SOC_LCD_I80_SUPPORTED=y -CONFIG_SOC_LCD_I80_BUSES=y -CONFIG_SOC_LCD_I80_BUS_WIDTH=24 -CONFIG_SOC_LEDC_HAS_TIMER_SPECIFIC_MUX=y -CONFIG_SOC_LEDC_SUPPORT_REF_TICK=y -CONFIG_SOC_LEDC_SUPPORT_HS_MODE=y -CONFIG_SOC_LEDC_CHANNEL_NUM=8 -CONFIG_SOC_LEDC_TIMER_BIT_WIDE_NUM=20 -CONFIG_SOC_MCPWM_GROUPS=2 -CONFIG_SOC_MCPWM_TIMERS_PER_GROUP=3 -CONFIG_SOC_MCPWM_OPERATORS_PER_GROUP=3 -CONFIG_SOC_MCPWM_COMPARATORS_PER_OPERATOR=2 -CONFIG_SOC_MCPWM_GENERATORS_PER_OPERATOR=2 -CONFIG_SOC_MCPWM_TRIGGERS_PER_OPERATOR=2 -CONFIG_SOC_MCPWM_GPIO_FAULTS_PER_GROUP=3 -CONFIG_SOC_MCPWM_CAPTURE_TIMERS_PER_GROUP=y -CONFIG_SOC_MCPWM_CAPTURE_CHANNELS_PER_TIMER=3 -CONFIG_SOC_MCPWM_GPIO_SYNCHROS_PER_GROUP=3 -CONFIG_SOC_MCPWM_BASE_CLK_HZ=160000000 -CONFIG_SOC_MPU_MIN_REGION_SIZE=0x20000000 -CONFIG_SOC_MPU_REGIONS_MAX_NUM=8 -CONFIG_SOC_PCNT_GROUPS=1 -CONFIG_SOC_PCNT_UNITS_PER_GROUP=8 -CONFIG_SOC_PCNT_CHANNELS_PER_UNIT=2 -CONFIG_SOC_PCNT_THRES_POINT_PER_UNIT=2 -CONFIG_SOC_RMT_GROUPS=1 -CONFIG_SOC_RMT_TX_CANDIDATES_PER_GROUP=8 -CONFIG_SOC_RMT_RX_CANDIDATES_PER_GROUP=8 -CONFIG_SOC_RMT_CHANNELS_PER_GROUP=8 -CONFIG_SOC_RMT_MEM_WORDS_PER_CHANNEL=64 -CONFIG_SOC_RMT_SUPPORT_REF_TICK=y -CONFIG_SOC_RMT_CHANNEL_CLK_INDEPENDENT=y -CONFIG_SOC_RTCIO_PIN_COUNT=18 -CONFIG_SOC_RTCIO_INPUT_OUTPUT_SUPPORTED=y -CONFIG_SOC_RTCIO_HOLD_SUPPORTED=y -CONFIG_SOC_RTCIO_WAKE_SUPPORTED=y -CONFIG_SOC_SIGMADELTA_NUM=1 -CONFIG_SOC_SIGMADELTA_CHANNEL_NUM=8 -CONFIG_SOC_SPI_PERIPH_NUM=3 -CONFIG_SOC_SPI_DMA_CHAN_NUM=2 -CONFIG_SOC_SPI_MAXIMUM_BUFFER_SIZE=64 -CONFIG_SOC_SPI_MAX_PRE_DIVIDER=8192 -CONFIG_SOC_SPI_SUPPORT_AS_CS=y -CONFIG_SOC_TIMER_GROUPS=2 -CONFIG_SOC_TIMER_GROUP_TIMERS_PER_GROUP=2 -CONFIG_SOC_TIMER_GROUP_COUNTER_BIT_WIDTH=64 -CONFIG_SOC_TIMER_GROUP_TOTAL_TIMERS=4 -CONFIG_SOC_TOUCH_VERSION_1=y -CONFIG_SOC_TOUCH_SENSOR_NUM=10 -CONFIG_SOC_TOUCH_PAD_MEASURE_WAIT_MAX=0xFF -CONFIG_SOC_TWAI_BRP_MIN=2 -CONFIG_SOC_TWAI_SUPPORT_MULTI_ADDRESS_LAYOUT=y -CONFIG_SOC_UART_NUM=3 -CONFIG_SOC_UART_SUPPORT_REF_TICK=y -CONFIG_SOC_UART_FIFO_LEN=128 -CONFIG_SOC_UART_BITRATE_MAX=5000000 -CONFIG_SOC_SPIRAM_SUPPORTED=y -CONFIG_SOC_SHA_SUPPORT_PARALLEL_ENG=y -CONFIG_SOC_SHA_SUPPORT_SHA1=y -CONFIG_SOC_SHA_SUPPORT_SHA256=y -CONFIG_SOC_SHA_SUPPORT_SHA384=y -CONFIG_SOC_SHA_SUPPORT_SHA512=y -CONFIG_SOC_RSA_MAX_BIT_LEN=4096 -CONFIG_SOC_AES_SUPPORT_AES_128=y -CONFIG_SOC_AES_SUPPORT_AES_192=y -CONFIG_SOC_AES_SUPPORT_AES_256=y -CONFIG_SOC_FLASH_ENCRYPTED_XTS_AES_BLOCK_MAX=32 -CONFIG_SOC_PHY_DIG_REGS_MEM_SIZE=21 -CONFIG_SOC_PM_SUPPORT_EXT_WAKEUP=y -CONFIG_SOC_PM_SUPPORT_TOUCH_SENSOR_WAKEUP=y -CONFIG_SOC_SDMMC_USE_IOMUX=y -CONFIG_SOC_SDMMC_NUM_SLOTS=2 -CONFIG_SOC_BLE_DONT_UPDATE_OWN_RPA=y -CONFIG_IDF_CMAKE=y -CONFIG_IDF_TARGET_ARCH_XTENSA=y -CONFIG_IDF_TARGET_ARCH="xtensa" -CONFIG_IDF_TARGET="esp32" -CONFIG_IDF_TARGET_ESP32=y -CONFIG_IDF_FIRMWARE_CHIP_ID=0x0000 - -# -# SDK tool configuration -# -CONFIG_SDK_TOOLPREFIX="xtensa-esp32-elf-" -# CONFIG_SDK_TOOLCHAIN_SUPPORTS_TIME_WIDE_64_BITS is not set -# end of SDK tool configuration - -# -# Build type -# -CONFIG_APP_BUILD_TYPE_APP_2NDBOOT=y -# CONFIG_APP_BUILD_TYPE_ELF_RAM is not set -CONFIG_APP_BUILD_GENERATE_BINARIES=y -CONFIG_APP_BUILD_BOOTLOADER=y -CONFIG_APP_BUILD_USE_FLASH_SECTIONS=y -# CONFIG_APP_REPRODUCIBLE_BUILD is not set -# end of Build type - -# -# Application manager -# -CONFIG_APP_COMPILE_TIME_DATE=y -# CONFIG_APP_EXCLUDE_PROJECT_VER_VAR is not set -# CONFIG_APP_EXCLUDE_PROJECT_NAME_VAR is not set -# CONFIG_APP_PROJECT_VER_FROM_CONFIG is not set -CONFIG_APP_RETRIEVE_LEN_ELF_SHA=16 -# end of Application manager - -# -# Bootloader config -# -CONFIG_BOOTLOADER_OFFSET_IN_FLASH=0x1000 -CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE=y -# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_DEBUG is not set -# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_PERF is not set -# CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_NONE is not set -# CONFIG_BOOTLOADER_LOG_LEVEL_NONE is not set -# CONFIG_BOOTLOADER_LOG_LEVEL_ERROR is not set -# CONFIG_BOOTLOADER_LOG_LEVEL_WARN is not set -CONFIG_BOOTLOADER_LOG_LEVEL_INFO=y -# CONFIG_BOOTLOADER_LOG_LEVEL_DEBUG is not set -# CONFIG_BOOTLOADER_LOG_LEVEL_VERBOSE is not set -CONFIG_BOOTLOADER_LOG_LEVEL=3 -# CONFIG_BOOTLOADER_SPI_CUSTOM_WP_PIN is not set -CONFIG_BOOTLOADER_SPI_WP_PIN=7 -# CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_8V is not set -CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V=y -# CONFIG_BOOTLOADER_FACTORY_RESET is not set -# CONFIG_BOOTLOADER_APP_TEST is not set -CONFIG_BOOTLOADER_WDT_ENABLE=y -# CONFIG_BOOTLOADER_WDT_DISABLE_IN_USER_CODE is not set -CONFIG_BOOTLOADER_WDT_TIME_MS=9000 -# CONFIG_BOOTLOADER_APP_ROLLBACK_ENABLE is not set -# CONFIG_BOOTLOADER_SKIP_VALIDATE_IN_DEEP_SLEEP is not set -# CONFIG_BOOTLOADER_SKIP_VALIDATE_ON_POWER_ON is not set -# CONFIG_BOOTLOADER_SKIP_VALIDATE_ALWAYS is not set -CONFIG_BOOTLOADER_RESERVE_RTC_SIZE=0 -# CONFIG_BOOTLOADER_CUSTOM_RESERVE_RTC is not set -CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT=y -# end of Bootloader config - -# -# Security features -# -# CONFIG_SECURE_SIGNED_APPS_NO_SECURE_BOOT is not set -# CONFIG_SECURE_BOOT is not set -# CONFIG_SECURE_FLASH_ENC_ENABLED is not set -# end of Security features - -CONFIG_ESP_ROM_HAS_CRC_LE=y -CONFIG_ESP_ROM_HAS_CRC_BE=y -CONFIG_ESP_ROM_HAS_JPEG_DECODE=y -CONFIG_ESP_ROM_SUPPORT_MULTIPLE_UART=y - -# -# Serial flasher config -# -# CONFIG_ESPTOOLPY_NO_STUB is not set -CONFIG_ESPTOOLPY_FLASHMODE_QIO=y -# CONFIG_ESPTOOLPY_FLASHMODE_QOUT is not set -# CONFIG_ESPTOOLPY_FLASHMODE_DIO is not set -# CONFIG_ESPTOOLPY_FLASHMODE_DOUT is not set -CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_STR=y -CONFIG_ESPTOOLPY_FLASHMODE="dio" -# CONFIG_ESPTOOLPY_FLASHFREQ_80M is not set -CONFIG_ESPTOOLPY_FLASHFREQ_40M=y -# CONFIG_ESPTOOLPY_FLASHFREQ_26M is not set -# CONFIG_ESPTOOLPY_FLASHFREQ_20M is not set -CONFIG_ESPTOOLPY_FLASHFREQ="40m" -# CONFIG_ESPTOOLPY_FLASHSIZE_1MB is not set -# CONFIG_ESPTOOLPY_FLASHSIZE_2MB is not set -CONFIG_ESPTOOLPY_FLASHSIZE_4MB=y -# CONFIG_ESPTOOLPY_FLASHSIZE_8MB is not set -# CONFIG_ESPTOOLPY_FLASHSIZE_16MB is not set -CONFIG_ESPTOOLPY_FLASHSIZE="4MB" -CONFIG_ESPTOOLPY_FLASHSIZE_DETECT=y -CONFIG_ESPTOOLPY_BEFORE_RESET=y -# CONFIG_ESPTOOLPY_BEFORE_NORESET is not set -CONFIG_ESPTOOLPY_BEFORE="default_reset" -CONFIG_ESPTOOLPY_AFTER_RESET=y -# CONFIG_ESPTOOLPY_AFTER_NORESET is not set -CONFIG_ESPTOOLPY_AFTER="hard_reset" -# CONFIG_ESPTOOLPY_MONITOR_BAUD_CONSOLE is not set -# CONFIG_ESPTOOLPY_MONITOR_BAUD_9600B is not set -# CONFIG_ESPTOOLPY_MONITOR_BAUD_57600B is not set -CONFIG_ESPTOOLPY_MONITOR_BAUD_115200B=y -# CONFIG_ESPTOOLPY_MONITOR_BAUD_230400B is not set -# CONFIG_ESPTOOLPY_MONITOR_BAUD_921600B is not set -# CONFIG_ESPTOOLPY_MONITOR_BAUD_2MB is not set -# CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER is not set -CONFIG_ESPTOOLPY_MONITOR_BAUD_OTHER_VAL=115200 -CONFIG_ESPTOOLPY_MONITOR_BAUD=115200 -# end of Serial flasher config - -# -# Partition Table -# -CONFIG_PARTITION_TABLE_SINGLE_APP=y -# CONFIG_PARTITION_TABLE_SINGLE_APP_LARGE is not set -# CONFIG_PARTITION_TABLE_TWO_OTA is not set -# CONFIG_PARTITION_TABLE_CUSTOM is not set -CONFIG_PARTITION_TABLE_CUSTOM_FILENAME="partitions.csv" -CONFIG_PARTITION_TABLE_FILENAME="partitions_singleapp.csv" -CONFIG_PARTITION_TABLE_OFFSET=0x8000 -CONFIG_PARTITION_TABLE_MD5=y -# end of Partition Table - -# -# Compiler options -# -CONFIG_COMPILER_OPTIMIZATION_DEFAULT=y -# CONFIG_COMPILER_OPTIMIZATION_SIZE is not set -# CONFIG_COMPILER_OPTIMIZATION_PERF is not set -# CONFIG_COMPILER_OPTIMIZATION_NONE is not set -CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE=y -# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT is not set -# CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_DISABLE is not set -CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL=2 -# CONFIG_COMPILER_OPTIMIZATION_CHECKS_SILENT is not set -CONFIG_COMPILER_HIDE_PATHS_MACROS=y -# CONFIG_COMPILER_CXX_EXCEPTIONS is not set -# CONFIG_COMPILER_CXX_RTTI is not set -CONFIG_COMPILER_STACK_CHECK_MODE_NONE=y -# CONFIG_COMPILER_STACK_CHECK_MODE_NORM is not set -# CONFIG_COMPILER_STACK_CHECK_MODE_STRONG is not set -# CONFIG_COMPILER_STACK_CHECK_MODE_ALL is not set -# CONFIG_COMPILER_WARN_WRITE_STRINGS is not set -# CONFIG_COMPILER_DISABLE_GCC8_WARNINGS is not set -# CONFIG_COMPILER_DUMP_RTL_FILES is not set -# end of Compiler options - -# -# Component config -# - -# -# Application Level Tracing -# -# CONFIG_APPTRACE_DEST_JTAG is not set -CONFIG_APPTRACE_DEST_NONE=y -CONFIG_APPTRACE_LOCK_ENABLE=y -# end of Application Level Tracing - -# -# ESP-ASIO -# -# CONFIG_ASIO_SSL_SUPPORT is not set -# end of ESP-ASIO - -# -# Bluetooth -# -# CONFIG_BT_ENABLED is not set -# end of Bluetooth - -# -# CoAP Configuration -# -CONFIG_COAP_MBEDTLS_PSK=y -# CONFIG_COAP_MBEDTLS_PKI is not set -# CONFIG_COAP_MBEDTLS_DEBUG is not set -CONFIG_COAP_LOG_DEFAULT_LEVEL=0 -# end of CoAP Configuration - -# -# Driver configurations -# - -# -# ADC configuration -# -# CONFIG_ADC_FORCE_XPD_FSM is not set -CONFIG_ADC_DISABLE_DAC=y -# end of ADC configuration - -# -# MCPWM configuration -# -# CONFIG_MCPWM_ISR_IN_IRAM is not set -# end of MCPWM configuration - -# -# SPI configuration -# -# CONFIG_SPI_MASTER_IN_IRAM is not set -CONFIG_SPI_MASTER_ISR_IN_IRAM=y -# CONFIG_SPI_SLAVE_IN_IRAM is not set -CONFIG_SPI_SLAVE_ISR_IN_IRAM=y -# end of SPI configuration - -# -# TWAI configuration -# -# CONFIG_TWAI_ISR_IN_IRAM is not set -# CONFIG_TWAI_ERRATA_FIX_BUS_OFF_REC is not set -# CONFIG_TWAI_ERRATA_FIX_TX_INTR_LOST is not set -# CONFIG_TWAI_ERRATA_FIX_RX_FRAME_INVALID is not set -# CONFIG_TWAI_ERRATA_FIX_RX_FIFO_CORRUPT is not set -# end of TWAI configuration - -# -# UART configuration -# -# CONFIG_UART_ISR_IN_IRAM is not set -# end of UART configuration - -# -# RTCIO configuration -# -# CONFIG_RTCIO_SUPPORT_RTC_GPIO_DESC is not set -# end of RTCIO configuration - -# -# GPIO Configuration -# -# CONFIG_GPIO_ESP32_SUPPORT_SWITCH_SLP_PULL is not set -# end of GPIO Configuration - -# -# GDMA Configuration -# -# CONFIG_GDMA_CTRL_FUNC_IN_IRAM is not set -# CONFIG_GDMA_ISR_IRAM_SAFE is not set -# end of GDMA Configuration -# end of Driver configurations - -# -# eFuse Bit Manager -# -CONFIG_EFUSE_CUSTOM_TABLE=y -CONFIG_EFUSE_CUSTOM_TABLE_FILENAME="main/esp_efuse_custom_table.csv" -CONFIG_EFUSE_VIRTUAL=y -# CONFIG_EFUSE_VIRTUAL_KEEP_IN_FLASH is not set -# CONFIG_EFUSE_CODE_SCHEME_COMPAT_NONE is not set -CONFIG_EFUSE_CODE_SCHEME_COMPAT_3_4=y -# CONFIG_EFUSE_CODE_SCHEME_COMPAT_REPEAT is not set -CONFIG_EFUSE_MAX_BLK_LEN=192 -# end of eFuse Bit Manager - -# -# ESP-TLS -# -CONFIG_ESP_TLS_USING_MBEDTLS=y -# CONFIG_ESP_TLS_USE_SECURE_ELEMENT is not set -# CONFIG_ESP_TLS_SERVER is not set -# CONFIG_ESP_TLS_CLIENT_SESSION_TICKETS is not set -# CONFIG_ESP_TLS_PSK_VERIFICATION is not set -# CONFIG_ESP_TLS_INSECURE is not set -# end of ESP-TLS - -# -# ESP32-specific -# -CONFIG_ESP32_ECO3_CACHE_LOCK_FIX=y -# CONFIG_ESP32_REV_MIN_0 is not set -CONFIG_ESP32_REV_MIN_1=y -# CONFIG_ESP32_REV_MIN_2 is not set -# CONFIG_ESP32_REV_MIN_3 is not set -CONFIG_ESP32_REV_MIN=1 -CONFIG_ESP32_DPORT_WORKAROUND=y -# CONFIG_ESP32_DEFAULT_CPU_FREQ_80 is not set -# CONFIG_ESP32_DEFAULT_CPU_FREQ_160 is not set -CONFIG_ESP32_DEFAULT_CPU_FREQ_240=y -CONFIG_ESP32_DEFAULT_CPU_FREQ_MHZ=240 -CONFIG_ESP32_SPIRAM_SUPPORT=y - -# -# SPI RAM config -# -CONFIG_SPIRAM_TYPE_AUTO=y -# CONFIG_SPIRAM_TYPE_ESPPSRAM16 is not set -# CONFIG_SPIRAM_TYPE_ESPPSRAM32 is not set -# CONFIG_SPIRAM_TYPE_ESPPSRAM64 is not set -CONFIG_SPIRAM_SIZE=-1 -CONFIG_SPIRAM_SPEED_40M=y -CONFIG_SPIRAM=y -CONFIG_SPIRAM_BOOT_INIT=y -# CONFIG_SPIRAM_IGNORE_NOTFOUND is not set -# CONFIG_SPIRAM_USE_MEMMAP is not set -# CONFIG_SPIRAM_USE_CAPS_ALLOC is not set -CONFIG_SPIRAM_USE_MALLOC=y -CONFIG_SPIRAM_MEMTEST=y -CONFIG_SPIRAM_MALLOC_ALWAYSINTERNAL=16384 -CONFIG_SPIRAM_TRY_ALLOCATE_WIFI_LWIP=y -CONFIG_SPIRAM_MALLOC_RESERVE_INTERNAL=32768 -# CONFIG_SPIRAM_ALLOW_BSS_SEG_EXTERNAL_MEMORY is not set -# CONFIG_SPIRAM_ALLOW_NOINIT_SEG_EXTERNAL_MEMORY is not set -CONFIG_SPIRAM_CACHE_WORKAROUND=y - -# -# SPIRAM cache workaround debugging -# -CONFIG_SPIRAM_CACHE_WORKAROUND_STRATEGY_MEMW=y -# CONFIG_SPIRAM_CACHE_WORKAROUND_STRATEGY_DUPLDST is not set -# CONFIG_SPIRAM_CACHE_WORKAROUND_STRATEGY_NOPS is not set -# end of SPIRAM cache workaround debugging - -# -# SPIRAM workaround libraries placement -# -CONFIG_SPIRAM_CACHE_LIBJMP_IN_IRAM=y -CONFIG_SPIRAM_CACHE_LIBMATH_IN_IRAM=y -CONFIG_SPIRAM_CACHE_LIBNUMPARSER_IN_IRAM=y -CONFIG_SPIRAM_CACHE_LIBIO_IN_IRAM=y -CONFIG_SPIRAM_CACHE_LIBTIME_IN_IRAM=y -CONFIG_SPIRAM_CACHE_LIBCHAR_IN_IRAM=y -CONFIG_SPIRAM_CACHE_LIBMEM_IN_IRAM=y -CONFIG_SPIRAM_CACHE_LIBSTR_IN_IRAM=y -CONFIG_SPIRAM_CACHE_LIBRAND_IN_IRAM=y -CONFIG_SPIRAM_CACHE_LIBENV_IN_IRAM=y -CONFIG_SPIRAM_CACHE_LIBFILE_IN_IRAM=y -CONFIG_SPIRAM_CACHE_LIBMISC_IN_IRAM=y -# end of SPIRAM workaround libraries placement - -CONFIG_SPIRAM_BANKSWITCH_ENABLE=y -CONFIG_SPIRAM_BANKSWITCH_RESERVE=8 -# CONFIG_SPIRAM_ALLOW_STACK_EXTERNAL_MEMORY is not set - -# -# PSRAM clock and cs IO for ESP32-DOWD -# -CONFIG_D0WD_PSRAM_CLK_IO=17 -CONFIG_D0WD_PSRAM_CS_IO=16 -# end of PSRAM clock and cs IO for ESP32-DOWD - -# -# PSRAM clock and cs IO for ESP32-D2WD -# -CONFIG_D2WD_PSRAM_CLK_IO=9 -CONFIG_D2WD_PSRAM_CS_IO=10 -# end of PSRAM clock and cs IO for ESP32-D2WD - -# -# PSRAM clock and cs IO for ESP32-PICO -# -CONFIG_PICO_PSRAM_CS_IO=10 -# end of PSRAM clock and cs IO for ESP32-PICO - -# CONFIG_SPIRAM_2T_MODE is not set -# end of SPI RAM config - -# CONFIG_ESP32_TRAX is not set -CONFIG_ESP32_TRACEMEM_RESERVE_DRAM=0x0 -CONFIG_ESP32_ULP_COPROC_ENABLED=y -CONFIG_ESP32_ULP_COPROC_RESERVE_MEM=512 -CONFIG_ESP32_DEBUG_OCDAWARE=y -CONFIG_ESP32_BROWNOUT_DET=y -CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_0=y -# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_1 is not set -# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_2 is not set -# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_3 is not set -# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_4 is not set -# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_5 is not set -# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_6 is not set -# CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_7 is not set -CONFIG_ESP32_BROWNOUT_DET_LVL=0 -CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1=y -# CONFIG_ESP32_TIME_SYSCALL_USE_RTC is not set -# CONFIG_ESP32_TIME_SYSCALL_USE_FRC1 is not set -# CONFIG_ESP32_TIME_SYSCALL_USE_NONE is not set -CONFIG_ESP32_RTC_CLK_SRC_INT_RC=y -# CONFIG_ESP32_RTC_CLK_SRC_EXT_CRYS is not set -# CONFIG_ESP32_RTC_CLK_SRC_EXT_OSC is not set -# CONFIG_ESP32_RTC_CLK_SRC_INT_8MD256 is not set -CONFIG_ESP32_RTC_CLK_CAL_CYCLES=1024 -CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY=2000 -CONFIG_ESP32_XTAL_FREQ_40=y -# CONFIG_ESP32_XTAL_FREQ_26 is not set -# CONFIG_ESP32_XTAL_FREQ_AUTO is not set -CONFIG_ESP32_XTAL_FREQ=40 -CONFIG_ESP32_DISABLE_BASIC_ROM_CONSOLE=y -# CONFIG_ESP32_NO_BLOBS is not set -# CONFIG_ESP32_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set -# CONFIG_ESP32_COMPATIBLE_PRE_V3_1_BOOTLOADERS is not set -# CONFIG_ESP32_USE_FIXED_STATIC_RAM_SIZE is not set -CONFIG_ESP32_DPORT_DIS_INTERRUPT_LVL=5 -# end of ESP32-specific - -# -# ADC-Calibration -# -CONFIG_ADC_CAL_EFUSE_TP_ENABLE=y -CONFIG_ADC_CAL_EFUSE_VREF_ENABLE=y -CONFIG_ADC_CAL_LUT_ENABLE=y -# end of ADC-Calibration - -# -# Common ESP-related -# -CONFIG_ESP_ERR_TO_NAME_LOOKUP=y -# end of Common ESP-related - -# -# Ethernet -# -CONFIG_ETH_ENABLED=y -CONFIG_ETH_USE_ESP32_EMAC=y -CONFIG_ETH_PHY_INTERFACE_RMII=y -CONFIG_ETH_RMII_CLK_INPUT=y -# CONFIG_ETH_RMII_CLK_OUTPUT is not set -CONFIG_ETH_RMII_CLK_IN_GPIO=0 -CONFIG_ETH_DMA_BUFFER_SIZE=512 -CONFIG_ETH_DMA_RX_BUFFER_NUM=10 -CONFIG_ETH_DMA_TX_BUFFER_NUM=10 -CONFIG_ETH_USE_SPI_ETHERNET=y -# CONFIG_ETH_SPI_ETHERNET_DM9051 is not set -# CONFIG_ETH_SPI_ETHERNET_W5500 is not set -# CONFIG_ETH_SPI_ETHERNET_KSZ8851SNL is not set -# CONFIG_ETH_USE_OPENETH is not set -# end of Ethernet - -# -# Event Loop Library -# -# CONFIG_ESP_EVENT_LOOP_PROFILING is not set -CONFIG_ESP_EVENT_POST_FROM_ISR=y -CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR=y -# end of Event Loop Library - -# -# GDB Stub -# -# end of GDB Stub - -# -# ESP HTTP client -# -CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS=y -# CONFIG_ESP_HTTP_CLIENT_ENABLE_BASIC_AUTH is not set -CONFIG_ESP_HTTP_CLIENT_ENABLE_DIGEST_AUTH=y -# end of ESP HTTP client - -# -# HTTP Server -# -CONFIG_HTTPD_MAX_REQ_HDR_LEN=512 -CONFIG_HTTPD_MAX_URI_LEN=512 -CONFIG_HTTPD_ERR_RESP_NO_DELAY=y -CONFIG_HTTPD_PURGE_BUF_LEN=32 -# CONFIG_HTTPD_LOG_PURGE_DATA is not set -# CONFIG_HTTPD_WS_SUPPORT is not set -# end of HTTP Server - -# -# ESP HTTPS OTA -# -# CONFIG_OTA_ALLOW_HTTP is not set -# end of ESP HTTPS OTA - -# -# ESP HTTPS server -# -# CONFIG_ESP_HTTPS_SERVER_ENABLE is not set -# end of ESP HTTPS server - -# -# Hardware Settings -# - -# -# MAC Config -# -CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA=y -CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP=y -CONFIG_ESP_MAC_ADDR_UNIVERSE_BT=y -CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH=y -# CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_TWO is not set -CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_FOUR=y -CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES=4 -# end of MAC Config - -# -# Sleep Config -# -CONFIG_ESP_SLEEP_RTC_BUS_ISO_WORKAROUND=y -# CONFIG_ESP_SLEEP_GPIO_RESET_WORKAROUND is not set -# CONFIG_ESP_SLEEP_PSRAM_LEAKAGE_WORKAROUND is not set -# CONFIG_ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND is not set -# end of Sleep Config - -# -# RTC Clock Config -# -# end of RTC Clock Config -# end of Hardware Settings - -# -# LCD and Touch Panel -# - -# -# LCD Peripheral Configuration -# -CONFIG_LCD_PANEL_IO_FORMAT_BUF_SIZE=32 -# end of LCD Peripheral Configuration -# end of LCD and Touch Panel - -# -# ESP NETIF Adapter -# -CONFIG_ESP_NETIF_IP_LOST_TIMER_INTERVAL=120 -CONFIG_ESP_NETIF_TCPIP_LWIP=y -# CONFIG_ESP_NETIF_LOOPBACK is not set -CONFIG_ESP_NETIF_TCPIP_ADAPTER_COMPATIBLE_LAYER=y -# CONFIG_ESP_NETIF_L2_TAP is not set -# end of ESP NETIF Adapter - -# -# PHY -# -CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE=y -# CONFIG_ESP_PHY_INIT_DATA_IN_PARTITION is not set -CONFIG_ESP_PHY_MAX_WIFI_TX_POWER=20 -CONFIG_ESP_PHY_MAX_TX_POWER=20 -CONFIG_ESP_PHY_REDUCE_TX_POWER=y -# end of PHY - -# -# Power Management -# -# CONFIG_PM_ENABLE is not set -# end of Power Management - -# -# ESP System Settings -# -CONFIG_ESP_SYSTEM_PANIC_PRINT_HALT=y -# CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT is not set -# CONFIG_ESP_SYSTEM_PANIC_SILENT_REBOOT is not set -# CONFIG_ESP_SYSTEM_PANIC_GDBSTUB is not set -# CONFIG_ESP_SYSTEM_GDBSTUB_RUNTIME is not set - -# -# Memory protection -# -# end of Memory protection - -CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE=32 -CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE=2304 -CONFIG_ESP_MAIN_TASK_STACK_SIZE=3584 -CONFIG_ESP_MAIN_TASK_AFFINITY_CPU0=y -# CONFIG_ESP_MAIN_TASK_AFFINITY_CPU1 is not set -# CONFIG_ESP_MAIN_TASK_AFFINITY_NO_AFFINITY is not set -CONFIG_ESP_MAIN_TASK_AFFINITY=0x0 -CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE=2048 -CONFIG_ESP_CONSOLE_UART_DEFAULT=y -# CONFIG_ESP_CONSOLE_UART_CUSTOM is not set -# CONFIG_ESP_CONSOLE_NONE is not set -CONFIG_ESP_CONSOLE_UART=y -CONFIG_ESP_CONSOLE_MULTIPLE_UART=y -CONFIG_ESP_CONSOLE_UART_NUM=0 -CONFIG_ESP_CONSOLE_UART_BAUDRATE=115200 -CONFIG_ESP_INT_WDT=y -CONFIG_ESP_INT_WDT_TIMEOUT_MS=300 -CONFIG_ESP_INT_WDT_CHECK_CPU1=y -CONFIG_ESP_TASK_WDT=y -# CONFIG_ESP_TASK_WDT_PANIC is not set -CONFIG_ESP_TASK_WDT_TIMEOUT_S=5 -CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0=y -CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1=y -# CONFIG_ESP_PANIC_HANDLER_IRAM is not set -# CONFIG_ESP_DEBUG_STUBS_ENABLE is not set -# CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_5 is not set -CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_4=y -# end of ESP System Settings - -# -# IPC (Inter-Processor Call) -# -CONFIG_ESP_IPC_TASK_STACK_SIZE=1024 -CONFIG_ESP_IPC_USES_CALLERS_PRIORITY=y -CONFIG_ESP_IPC_ISR_ENABLE=y -# end of IPC (Inter-Processor Call) - -# -# High resolution timer (esp_timer) -# -# CONFIG_ESP_TIMER_PROFILING is not set -CONFIG_ESP_TIME_FUNCS_USE_RTC_TIMER=y -CONFIG_ESP_TIME_FUNCS_USE_ESP_TIMER=y -CONFIG_ESP_TIMER_TASK_STACK_SIZE=3584 -CONFIG_ESP_TIMER_INTERRUPT_LEVEL=1 -# CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD is not set -# CONFIG_ESP_TIMER_IMPL_FRC2 is not set -CONFIG_ESP_TIMER_IMPL_TG0_LAC=y -# end of High resolution timer (esp_timer) - -# -# Wi-Fi -# -CONFIG_ESP32_WIFI_ENABLED=y -CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM=10 -CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM=32 -CONFIG_ESP32_WIFI_STATIC_TX_BUFFER=y -CONFIG_ESP32_WIFI_TX_BUFFER_TYPE=0 -CONFIG_ESP32_WIFI_STATIC_TX_BUFFER_NUM=16 -CONFIG_ESP32_WIFI_CACHE_TX_BUFFER_NUM=32 -# CONFIG_ESP32_WIFI_CSI_ENABLED is not set -CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED=y -CONFIG_ESP32_WIFI_TX_BA_WIN=6 -CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED=y -CONFIG_ESP32_WIFI_RX_BA_WIN=6 -# CONFIG_ESP32_WIFI_AMSDU_TX_ENABLED is not set -CONFIG_ESP32_WIFI_NVS_ENABLED=y -CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0=y -# CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_1 is not set -CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN=752 -CONFIG_ESP32_WIFI_MGMT_SBUF_NUM=32 -CONFIG_ESP32_WIFI_IRAM_OPT=y -CONFIG_ESP32_WIFI_RX_IRAM_OPT=y -CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE=y -# CONFIG_ESP_WIFI_SLP_IRAM_OPT is not set -# CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE is not set -# CONFIG_ESP_WIFI_GMAC_SUPPORT is not set -CONFIG_ESP_WIFI_SOFTAP_SUPPORT=y -# end of Wi-Fi - -# -# Core dump -# -# CONFIG_ESP_COREDUMP_ENABLE_TO_FLASH is not set -# CONFIG_ESP_COREDUMP_ENABLE_TO_UART is not set -CONFIG_ESP_COREDUMP_ENABLE_TO_NONE=y -# end of Core dump - -# -# FAT Filesystem support -# -CONFIG_FATFS_VOLUME_COUNT=2 -# CONFIG_FATFS_CODEPAGE_DYNAMIC is not set -CONFIG_FATFS_CODEPAGE_437=y -# CONFIG_FATFS_CODEPAGE_720 is not set -# CONFIG_FATFS_CODEPAGE_737 is not set -# CONFIG_FATFS_CODEPAGE_771 is not set -# CONFIG_FATFS_CODEPAGE_775 is not set -# CONFIG_FATFS_CODEPAGE_850 is not set -# CONFIG_FATFS_CODEPAGE_852 is not set -# CONFIG_FATFS_CODEPAGE_855 is not set -# CONFIG_FATFS_CODEPAGE_857 is not set -# CONFIG_FATFS_CODEPAGE_860 is not set -# CONFIG_FATFS_CODEPAGE_861 is not set -# CONFIG_FATFS_CODEPAGE_862 is not set -# CONFIG_FATFS_CODEPAGE_863 is not set -# CONFIG_FATFS_CODEPAGE_864 is not set -# CONFIG_FATFS_CODEPAGE_865 is not set -# CONFIG_FATFS_CODEPAGE_866 is not set -# CONFIG_FATFS_CODEPAGE_869 is not set -# CONFIG_FATFS_CODEPAGE_932 is not set -# CONFIG_FATFS_CODEPAGE_936 is not set -# CONFIG_FATFS_CODEPAGE_949 is not set -# CONFIG_FATFS_CODEPAGE_950 is not set -CONFIG_FATFS_CODEPAGE=437 -CONFIG_FATFS_LFN_NONE=y -# CONFIG_FATFS_LFN_HEAP is not set -# CONFIG_FATFS_LFN_STACK is not set -CONFIG_FATFS_FS_LOCK=0 -CONFIG_FATFS_TIMEOUT_MS=10000 -CONFIG_FATFS_PER_FILE_CACHE=y -CONFIG_FATFS_ALLOC_PREFER_EXTRAM=y -# CONFIG_FATFS_USE_FASTSEEK is not set -# end of FAT Filesystem support - -# -# Modbus configuration -# -CONFIG_FMB_COMM_MODE_TCP_EN=y -CONFIG_FMB_TCP_PORT_DEFAULT=502 -CONFIG_FMB_TCP_PORT_MAX_CONN=5 -CONFIG_FMB_TCP_CONNECTION_TOUT_SEC=20 -# CONFIG_FMB_COMM_MODE_RTU_EN is not set -# CONFIG_FMB_COMM_MODE_ASCII_EN is not set -CONFIG_FMB_MASTER_TIMEOUT_MS_RESPOND=150 -CONFIG_FMB_MASTER_DELAY_MS_CONVERT=200 -CONFIG_FMB_QUEUE_LENGTH=20 -CONFIG_FMB_PORT_TASK_STACK_SIZE=4096 -CONFIG_FMB_SERIAL_BUF_SIZE=256 -CONFIG_FMB_PORT_TASK_PRIO=10 -# CONFIG_FMB_PORT_TASK_AFFINITY_NO_AFFINITY is not set -CONFIG_FMB_PORT_TASK_AFFINITY_CPU0=y -# CONFIG_FMB_PORT_TASK_AFFINITY_CPU1 is not set -CONFIG_FMB_PORT_TASK_AFFINITY=0x0 -CONFIG_FMB_CONTROLLER_SLAVE_ID_SUPPORT=y -CONFIG_FMB_CONTROLLER_SLAVE_ID=0x00112233 -CONFIG_FMB_CONTROLLER_NOTIFY_TIMEOUT=20 -CONFIG_FMB_CONTROLLER_NOTIFY_QUEUE_SIZE=20 -CONFIG_FMB_CONTROLLER_STACK_SIZE=4096 -CONFIG_FMB_EVENT_QUEUE_TIMEOUT=20 -# CONFIG_FMB_TIMER_PORT_ENABLED is not set -# CONFIG_FMB_TIMER_USE_ISR_DISPATCH_METHOD is not set -# end of Modbus configuration - -# -# FreeRTOS -# -# CONFIG_FREERTOS_UNICORE is not set -CONFIG_FREERTOS_NO_AFFINITY=0x7FFFFFFF -CONFIG_FREERTOS_TICK_SUPPORT_CORETIMER=y -CONFIG_FREERTOS_CORETIMER_0=y -# CONFIG_FREERTOS_CORETIMER_1 is not set -CONFIG_FREERTOS_SYSTICK_USES_CCOUNT=y -CONFIG_FREERTOS_HZ=100 -CONFIG_FREERTOS_ASSERT_ON_UNTESTED_FUNCTION=y -# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_NONE is not set -# CONFIG_FREERTOS_CHECK_STACKOVERFLOW_PTRVAL is not set -CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY=y -# CONFIG_FREERTOS_WATCHPOINT_END_OF_STACK is not set -CONFIG_FREERTOS_INTERRUPT_BACKTRACE=y -CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS=1 -CONFIG_FREERTOS_ASSERT_FAIL_ABORT=y -# CONFIG_FREERTOS_ASSERT_FAIL_PRINT_CONTINUE is not set -# CONFIG_FREERTOS_ASSERT_DISABLE is not set -CONFIG_FREERTOS_IDLE_TASK_STACKSIZE=1536 -CONFIG_FREERTOS_ISR_STACKSIZE=1536 -# CONFIG_FREERTOS_LEGACY_HOOKS is not set -CONFIG_FREERTOS_MAX_TASK_NAME_LEN=16 -CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION=y -# CONFIG_FREERTOS_ENABLE_STATIC_TASK_CLEAN_UP is not set -CONFIG_FREERTOS_TIMER_TASK_PRIORITY=1 -CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH=2048 -CONFIG_FREERTOS_TIMER_QUEUE_LENGTH=10 -CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE=0 -# CONFIG_FREERTOS_USE_TRACE_FACILITY is not set -# CONFIG_FREERTOS_GENERATE_RUN_TIME_STATS is not set -CONFIG_FREERTOS_TASK_FUNCTION_WRAPPER=y -CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER=y -# CONFIG_FREERTOS_CHECK_PORT_CRITICAL_COMPLIANCE is not set -# CONFIG_FREERTOS_PLACE_FUNCTIONS_INTO_FLASH is not set -CONFIG_FREERTOS_DEBUG_OCDAWARE=y -# CONFIG_FREERTOS_FPU_IN_ISR is not set -CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT=y -# CONFIG_FREERTOS_PLACE_SNAPSHOT_FUNS_INTO_FLASH is not set -# end of FreeRTOS - -# -# Hardware Abstraction Layer (HAL) and Low Level (LL) -# -CONFIG_HAL_ASSERTION_EQUALS_SYSTEM=y -# CONFIG_HAL_ASSERTION_DISABLE is not set -# CONFIG_HAL_ASSERTION_SILIENT is not set -# CONFIG_HAL_ASSERTION_ENABLE is not set -CONFIG_HAL_DEFAULT_ASSERTION_LEVEL=2 -# end of Hardware Abstraction Layer (HAL) and Low Level (LL) - -# -# Heap memory debugging -# -CONFIG_HEAP_POISONING_DISABLED=y -# CONFIG_HEAP_POISONING_LIGHT is not set -# CONFIG_HEAP_POISONING_COMPREHENSIVE is not set -CONFIG_HEAP_TRACING_OFF=y -# CONFIG_HEAP_TRACING_STANDALONE is not set -# CONFIG_HEAP_TRACING_TOHOST is not set -# CONFIG_HEAP_ABORT_WHEN_ALLOCATION_FAILS is not set -# end of Heap memory debugging - -# -# Log output -# -# CONFIG_LOG_DEFAULT_LEVEL_NONE is not set -# CONFIG_LOG_DEFAULT_LEVEL_ERROR is not set -# CONFIG_LOG_DEFAULT_LEVEL_WARN is not set -CONFIG_LOG_DEFAULT_LEVEL_INFO=y -# CONFIG_LOG_DEFAULT_LEVEL_DEBUG is not set -# CONFIG_LOG_DEFAULT_LEVEL_VERBOSE is not set -CONFIG_LOG_DEFAULT_LEVEL=3 -CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT=y -# CONFIG_LOG_MAXIMUM_LEVEL_DEBUG is not set -# CONFIG_LOG_MAXIMUM_LEVEL_VERBOSE is not set -CONFIG_LOG_MAXIMUM_LEVEL=3 -CONFIG_LOG_COLORS=y -CONFIG_LOG_TIMESTAMP_SOURCE_RTOS=y -# CONFIG_LOG_TIMESTAMP_SOURCE_SYSTEM is not set -# end of Log output - -# -# LWIP -# -CONFIG_LWIP_LOCAL_HOSTNAME="espressif" -# CONFIG_LWIP_NETIF_API is not set -# CONFIG_LWIP_TCPIP_CORE_LOCKING is not set -CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES=y -# CONFIG_LWIP_L2_TO_L3_COPY is not set -# CONFIG_LWIP_IRAM_OPTIMIZATION is not set -CONFIG_LWIP_TIMERS_ONDEMAND=y -CONFIG_LWIP_MAX_SOCKETS=10 -# CONFIG_LWIP_USE_ONLY_LWIP_SELECT is not set -# CONFIG_LWIP_SO_LINGER is not set -CONFIG_LWIP_SO_REUSE=y -CONFIG_LWIP_SO_REUSE_RXTOALL=y -# CONFIG_LWIP_SO_RCVBUF is not set -# CONFIG_LWIP_NETBUF_RECVINFO is not set -CONFIG_LWIP_IP4_FRAG=y -CONFIG_LWIP_IP6_FRAG=y -# CONFIG_LWIP_IP4_REASSEMBLY is not set -# CONFIG_LWIP_IP6_REASSEMBLY is not set -# CONFIG_LWIP_IP_FORWARD is not set -# CONFIG_LWIP_STATS is not set -# CONFIG_LWIP_ETHARP_TRUST_IP_MAC is not set -CONFIG_LWIP_ESP_GRATUITOUS_ARP=y -CONFIG_LWIP_GARP_TMR_INTERVAL=60 -CONFIG_LWIP_TCPIP_RECVMBOX_SIZE=32 -CONFIG_LWIP_DHCP_DOES_ARP_CHECK=y -# CONFIG_LWIP_DHCP_DISABLE_CLIENT_ID is not set -CONFIG_LWIP_DHCP_DISABLE_VENDOR_CLASS_ID=y -# CONFIG_LWIP_DHCP_RESTORE_LAST_IP is not set -CONFIG_LWIP_DHCP_OPTIONS_LEN=68 - -# -# DHCP server -# -CONFIG_LWIP_DHCPS=y -CONFIG_LWIP_DHCPS_LEASE_UNIT=60 -CONFIG_LWIP_DHCPS_MAX_STATION_NUM=8 -# end of DHCP server - -# CONFIG_LWIP_AUTOIP is not set -CONFIG_LWIP_IPV6=y -# CONFIG_LWIP_IPV6_AUTOCONFIG is not set -CONFIG_LWIP_IPV6_NUM_ADDRESSES=3 -# CONFIG_LWIP_IPV6_FORWARD is not set -# CONFIG_LWIP_NETIF_STATUS_CALLBACK is not set -CONFIG_LWIP_NETIF_LOOPBACK=y -CONFIG_LWIP_LOOPBACK_MAX_PBUFS=8 - -# -# TCP -# -CONFIG_LWIP_MAX_ACTIVE_TCP=16 -CONFIG_LWIP_MAX_LISTENING_TCP=16 -CONFIG_LWIP_TCP_HIGH_SPEED_RETRANSMISSION=y -CONFIG_LWIP_TCP_MAXRTX=12 -CONFIG_LWIP_TCP_SYNMAXRTX=12 -CONFIG_LWIP_TCP_MSS=1440 -CONFIG_LWIP_TCP_TMR_INTERVAL=250 -CONFIG_LWIP_TCP_MSL=60000 -CONFIG_LWIP_TCP_SND_BUF_DEFAULT=5744 -CONFIG_LWIP_TCP_WND_DEFAULT=5744 -CONFIG_LWIP_TCP_RECVMBOX_SIZE=6 -CONFIG_LWIP_TCP_QUEUE_OOSEQ=y -# CONFIG_LWIP_TCP_SACK_OUT is not set -# CONFIG_LWIP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES is not set -CONFIG_LWIP_TCP_OVERSIZE_MSS=y -# CONFIG_LWIP_TCP_OVERSIZE_QUARTER_MSS is not set -# CONFIG_LWIP_TCP_OVERSIZE_DISABLE is not set -# CONFIG_LWIP_WND_SCALE is not set -CONFIG_LWIP_TCP_RTO_TIME=1500 -# end of TCP - -# -# UDP -# -CONFIG_LWIP_MAX_UDP_PCBS=16 -CONFIG_LWIP_UDP_RECVMBOX_SIZE=6 -# end of UDP - -# -# Checksums -# -# CONFIG_LWIP_CHECKSUM_CHECK_IP is not set -# CONFIG_LWIP_CHECKSUM_CHECK_UDP is not set -CONFIG_LWIP_CHECKSUM_CHECK_ICMP=y -# end of Checksums - -CONFIG_LWIP_TCPIP_TASK_STACK_SIZE=3072 -CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY=y -# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU0 is not set -# CONFIG_LWIP_TCPIP_TASK_AFFINITY_CPU1 is not set -CONFIG_LWIP_TCPIP_TASK_AFFINITY=0x7FFFFFFF -# CONFIG_LWIP_PPP_SUPPORT is not set -CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE=3 -CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS=5 -# CONFIG_LWIP_SLIP_SUPPORT is not set - -# -# ICMP -# -CONFIG_LWIP_ICMP=y -# CONFIG_LWIP_MULTICAST_PING is not set -# CONFIG_LWIP_BROADCAST_PING is not set -# end of ICMP - -# -# LWIP RAW API -# -CONFIG_LWIP_MAX_RAW_PCBS=16 -# end of LWIP RAW API - -# -# SNTP -# -CONFIG_LWIP_SNTP_MAX_SERVERS=1 -# CONFIG_LWIP_DHCP_GET_NTP_SRV is not set -CONFIG_LWIP_SNTP_UPDATE_DELAY=3600000 -# end of SNTP - -CONFIG_LWIP_ESP_LWIP_ASSERT=y - -# -# Hooks -# -# CONFIG_LWIP_HOOK_TCP_ISN_NONE is not set -CONFIG_LWIP_HOOK_TCP_ISN_DEFAULT=y -# CONFIG_LWIP_HOOK_TCP_ISN_CUSTOM is not set -CONFIG_LWIP_HOOK_IP6_ROUTE_NONE=y -# CONFIG_LWIP_HOOK_IP6_ROUTE_DEFAULT is not set -# CONFIG_LWIP_HOOK_IP6_ROUTE_CUSTOM is not set -CONFIG_LWIP_HOOK_ND6_GET_GW_NONE=y -# CONFIG_LWIP_HOOK_ND6_GET_GW_DEFAULT is not set -# CONFIG_LWIP_HOOK_ND6_GET_GW_CUSTOM is not set -CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE=y -# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_DEFAULT is not set -# CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_CUSTOM is not set -# end of Hooks - -# CONFIG_LWIP_DEBUG is not set -# end of LWIP - -# -# mbedTLS -# -CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC=y -# CONFIG_MBEDTLS_EXTERNAL_MEM_ALLOC is not set -# CONFIG_MBEDTLS_DEFAULT_MEM_ALLOC is not set -# CONFIG_MBEDTLS_CUSTOM_MEM_ALLOC is not set -CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN=y -CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN=16384 -CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN=4096 -# CONFIG_MBEDTLS_DYNAMIC_BUFFER is not set -# CONFIG_MBEDTLS_DEBUG is not set - -# -# Certificate Bundle -# -CONFIG_MBEDTLS_CERTIFICATE_BUNDLE=y -CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL=y -# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_CMN is not set -# CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_NONE is not set -# CONFIG_MBEDTLS_CUSTOM_CERTIFICATE_BUNDLE is not set -# end of Certificate Bundle - -# CONFIG_MBEDTLS_ECP_RESTARTABLE is not set -# CONFIG_MBEDTLS_CMAC_C is not set -CONFIG_MBEDTLS_HARDWARE_AES=y -CONFIG_MBEDTLS_HARDWARE_MPI=y -CONFIG_MBEDTLS_HARDWARE_SHA=y -CONFIG_MBEDTLS_ROM_MD5=y -# CONFIG_MBEDTLS_ATCA_HW_ECDSA_SIGN is not set -# CONFIG_MBEDTLS_ATCA_HW_ECDSA_VERIFY is not set -CONFIG_MBEDTLS_HAVE_TIME=y -# CONFIG_MBEDTLS_HAVE_TIME_DATE is not set -CONFIG_MBEDTLS_ECDSA_DETERMINISTIC=y -CONFIG_MBEDTLS_SHA512_C=y -CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT=y -# CONFIG_MBEDTLS_TLS_SERVER_ONLY is not set -# CONFIG_MBEDTLS_TLS_CLIENT_ONLY is not set -# CONFIG_MBEDTLS_TLS_DISABLED is not set -CONFIG_MBEDTLS_TLS_SERVER=y -CONFIG_MBEDTLS_TLS_CLIENT=y -CONFIG_MBEDTLS_TLS_ENABLED=y - -# -# TLS Key Exchange Methods -# -# CONFIG_MBEDTLS_PSK_MODES is not set -CONFIG_MBEDTLS_KEY_EXCHANGE_RSA=y -CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE=y -CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA=y -CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA=y -CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA=y -CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA=y -# end of TLS Key Exchange Methods - -CONFIG_MBEDTLS_SSL_RENEGOTIATION=y -# CONFIG_MBEDTLS_SSL_PROTO_SSL3 is not set -CONFIG_MBEDTLS_SSL_PROTO_TLS1=y -CONFIG_MBEDTLS_SSL_PROTO_TLS1_1=y -CONFIG_MBEDTLS_SSL_PROTO_TLS1_2=y -# CONFIG_MBEDTLS_SSL_PROTO_GMTSSL1_1 is not set -# CONFIG_MBEDTLS_SSL_PROTO_DTLS is not set -CONFIG_MBEDTLS_SSL_ALPN=y -CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS=y -CONFIG_MBEDTLS_X509_CHECK_KEY_USAGE=y -CONFIG_MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE=y -CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS=y - -# -# Symmetric Ciphers -# -CONFIG_MBEDTLS_AES_C=y -# CONFIG_MBEDTLS_CAMELLIA_C is not set -# CONFIG_MBEDTLS_DES_C is not set -CONFIG_MBEDTLS_RC4_DISABLED=y -# CONFIG_MBEDTLS_RC4_ENABLED_NO_DEFAULT is not set -# CONFIG_MBEDTLS_RC4_ENABLED is not set -# CONFIG_MBEDTLS_BLOWFISH_C is not set -# CONFIG_MBEDTLS_XTEA_C is not set -CONFIG_MBEDTLS_CCM_C=y -CONFIG_MBEDTLS_GCM_C=y -# CONFIG_MBEDTLS_NIST_KW_C is not set -# end of Symmetric Ciphers - -# CONFIG_MBEDTLS_RIPEMD160_C is not set - -# -# Certificates -# -CONFIG_MBEDTLS_PEM_PARSE_C=y -CONFIG_MBEDTLS_PEM_WRITE_C=y -CONFIG_MBEDTLS_X509_CRL_PARSE_C=y -CONFIG_MBEDTLS_X509_CSR_PARSE_C=y -# end of Certificates - -CONFIG_MBEDTLS_ECP_C=y -# CONFIG_MBEDTLS_DHM_C is not set -CONFIG_MBEDTLS_ECDH_C=y -CONFIG_MBEDTLS_ECDSA_C=y -# CONFIG_MBEDTLS_ECJPAKE_C is not set -CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED=y -CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED=y -CONFIG_MBEDTLS_ECP_NIST_OPTIM=y -# CONFIG_MBEDTLS_POLY1305_C is not set -# CONFIG_MBEDTLS_CHACHA20_C is not set -# CONFIG_MBEDTLS_HKDF_C is not set -# CONFIG_MBEDTLS_THREADING_C is not set -# CONFIG_MBEDTLS_LARGE_KEY_SOFTWARE_MPI is not set -# CONFIG_MBEDTLS_SECURITY_RISKS is not set -# end of mbedTLS - -# -# mDNS -# -CONFIG_MDNS_MAX_SERVICES=10 -CONFIG_MDNS_TASK_PRIORITY=1 -CONFIG_MDNS_TASK_STACK_SIZE=4096 -# CONFIG_MDNS_TASK_AFFINITY_NO_AFFINITY is not set -CONFIG_MDNS_TASK_AFFINITY_CPU0=y -# CONFIG_MDNS_TASK_AFFINITY_CPU1 is not set -CONFIG_MDNS_TASK_AFFINITY=0x0 -CONFIG_MDNS_SERVICE_ADD_TIMEOUT_MS=2000 -# CONFIG_MDNS_STRICT_MODE is not set -CONFIG_MDNS_TIMER_PERIOD_MS=100 -# CONFIG_MDNS_NETWORKING_SOCKET is not set -CONFIG_MDNS_MULTIPLE_INSTANCE=y -# end of mDNS - -# -# ESP-MQTT Configurations -# -CONFIG_MQTT_PROTOCOL_311=y -CONFIG_MQTT_TRANSPORT_SSL=y -CONFIG_MQTT_TRANSPORT_WEBSOCKET=y -CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE=y -# CONFIG_MQTT_MSG_ID_INCREMENTAL is not set -# CONFIG_MQTT_SKIP_PUBLISH_IF_DISCONNECTED is not set -# CONFIG_MQTT_REPORT_DELETED_MESSAGES is not set -# CONFIG_MQTT_USE_CUSTOM_CONFIG is not set -# CONFIG_MQTT_TASK_CORE_SELECTION_ENABLED is not set -# CONFIG_MQTT_CUSTOM_OUTBOX is not set -# end of ESP-MQTT Configurations - -# -# Newlib -# -CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF=y -# CONFIG_NEWLIB_STDOUT_LINE_ENDING_LF is not set -# CONFIG_NEWLIB_STDOUT_LINE_ENDING_CR is not set -# CONFIG_NEWLIB_STDIN_LINE_ENDING_CRLF is not set -# CONFIG_NEWLIB_STDIN_LINE_ENDING_LF is not set -CONFIG_NEWLIB_STDIN_LINE_ENDING_CR=y -# CONFIG_NEWLIB_NANO_FORMAT is not set -# end of Newlib - -# -# NVS -# -# end of NVS - -# -# OpenSSL -# -# CONFIG_OPENSSL_DEBUG is not set -CONFIG_OPENSSL_ERROR_STACK=y -# CONFIG_OPENSSL_ASSERT_DO_NOTHING is not set -CONFIG_OPENSSL_ASSERT_EXIT=y -# end of OpenSSL - -# -# OpenThread -# -# CONFIG_OPENTHREAD_ENABLED is not set -# end of OpenThread - -# -# PThreads -# -CONFIG_PTHREAD_TASK_PRIO_DEFAULT=5 -CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072 -CONFIG_PTHREAD_STACK_MIN=768 -CONFIG_PTHREAD_DEFAULT_CORE_NO_AFFINITY=y -# CONFIG_PTHREAD_DEFAULT_CORE_0 is not set -# CONFIG_PTHREAD_DEFAULT_CORE_1 is not set -CONFIG_PTHREAD_TASK_CORE_DEFAULT=-1 -CONFIG_PTHREAD_TASK_NAME_DEFAULT="pthread" -# end of PThreads - -# -# SPI Flash driver -# -# CONFIG_SPI_FLASH_VERIFY_WRITE is not set -# CONFIG_SPI_FLASH_ENABLE_COUNTERS is not set -CONFIG_SPI_FLASH_ROM_DRIVER_PATCH=y -CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS=y -# CONFIG_SPI_FLASH_DANGEROUS_WRITE_FAILS is not set -# CONFIG_SPI_FLASH_DANGEROUS_WRITE_ALLOWED is not set -# CONFIG_SPI_FLASH_USE_LEGACY_IMPL is not set -# CONFIG_SPI_FLASH_SHARE_SPI1_BUS is not set -# CONFIG_SPI_FLASH_BYPASS_BLOCK_ERASE is not set -CONFIG_SPI_FLASH_YIELD_DURING_ERASE=y -CONFIG_SPI_FLASH_ERASE_YIELD_DURATION_MS=20 -CONFIG_SPI_FLASH_ERASE_YIELD_TICKS=1 -CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE=8192 -# CONFIG_SPI_FLASH_SIZE_OVERRIDE is not set -# CONFIG_SPI_FLASH_CHECK_ERASE_TIMEOUT_DISABLED is not set -# CONFIG_SPI_FLASH_OVERRIDE_CHIP_DRIVER_LIST is not set - -# -# Auto-detect flash chips -# -CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP=y -CONFIG_SPI_FLASH_SUPPORT_MXIC_CHIP=y -CONFIG_SPI_FLASH_SUPPORT_GD_CHIP=y -CONFIG_SPI_FLASH_SUPPORT_WINBOND_CHIP=y -# CONFIG_SPI_FLASH_SUPPORT_BOYA_CHIP is not set -# CONFIG_SPI_FLASH_SUPPORT_TH_CHIP is not set -# end of Auto-detect flash chips - -CONFIG_SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE=y -# end of SPI Flash driver - -# -# SPIFFS Configuration -# -CONFIG_SPIFFS_MAX_PARTITIONS=3 - -# -# SPIFFS Cache Configuration -# -CONFIG_SPIFFS_CACHE=y -CONFIG_SPIFFS_CACHE_WR=y -# CONFIG_SPIFFS_CACHE_STATS is not set -# end of SPIFFS Cache Configuration - -CONFIG_SPIFFS_PAGE_CHECK=y -CONFIG_SPIFFS_GC_MAX_RUNS=10 -# CONFIG_SPIFFS_GC_STATS is not set -CONFIG_SPIFFS_PAGE_SIZE=256 -CONFIG_SPIFFS_OBJ_NAME_LEN=32 -# CONFIG_SPIFFS_FOLLOW_SYMLINKS is not set -CONFIG_SPIFFS_USE_MAGIC=y -CONFIG_SPIFFS_USE_MAGIC_LENGTH=y -CONFIG_SPIFFS_META_LENGTH=4 -CONFIG_SPIFFS_USE_MTIME=y - -# -# Debug Configuration -# -# CONFIG_SPIFFS_DBG is not set -# CONFIG_SPIFFS_API_DBG is not set -# CONFIG_SPIFFS_GC_DBG is not set -# CONFIG_SPIFFS_CACHE_DBG is not set -# CONFIG_SPIFFS_CHECK_DBG is not set -# CONFIG_SPIFFS_TEST_VISUALISATION is not set -# end of Debug Configuration -# end of SPIFFS Configuration - -# -# TCP Transport -# - -# -# Websocket -# -CONFIG_WS_TRANSPORT=y -CONFIG_WS_BUFFER_SIZE=1024 -# end of Websocket -# end of TCP Transport - -# -# Unity unit testing library -# -CONFIG_UNITY_ENABLE_FLOAT=y -CONFIG_UNITY_ENABLE_DOUBLE=y -# CONFIG_UNITY_ENABLE_64BIT is not set -# CONFIG_UNITY_ENABLE_COLOR is not set -CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER=y -# CONFIG_UNITY_ENABLE_FIXTURE is not set -# CONFIG_UNITY_ENABLE_BACKTRACE_ON_FAIL is not set -# end of Unity unit testing library - -# -# Virtual file system -# -CONFIG_VFS_SUPPORT_IO=y -CONFIG_VFS_SUPPORT_DIR=y -CONFIG_VFS_SUPPORT_SELECT=y -CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT=y -CONFIG_VFS_SUPPORT_TERMIOS=y - -# -# Host File System I/O (Semihosting) -# -CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS=1 -CONFIG_VFS_SEMIHOSTFS_HOST_PATH_MAX_LEN=128 -# end of Host File System I/O (Semihosting) -# end of Virtual file system - -# -# Wear Levelling -# -# CONFIG_WL_SECTOR_SIZE_512 is not set -CONFIG_WL_SECTOR_SIZE_4096=y -CONFIG_WL_SECTOR_SIZE=4096 -# end of Wear Levelling - -# -# Wi-Fi Provisioning Manager -# -CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES=16 -CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT=30 -# end of Wi-Fi Provisioning Manager - -# -# Supplicant -# -CONFIG_WPA_MBEDTLS_CRYPTO=y -# CONFIG_WPA_WAPI_PSK is not set -# CONFIG_WPA_SUITE_B_192 is not set -# CONFIG_WPA_DEBUG_PRINT is not set -# CONFIG_WPA_TESTING_OPTIONS is not set -# CONFIG_WPA_WPS_STRICT is not set -# CONFIG_WPA_11KV_SUPPORT is not set -# end of Supplicant -# end of Component config - -# -# Compatibility options -# -# CONFIG_LEGACY_INCLUDE_COMMON_HEADERS is not set -# end of Compatibility options - -# Deprecated options for backward compatibility -CONFIG_TOOLPREFIX="xtensa-esp32-elf-" -# CONFIG_LOG_BOOTLOADER_LEVEL_NONE is not set -# CONFIG_LOG_BOOTLOADER_LEVEL_ERROR is not set -# CONFIG_LOG_BOOTLOADER_LEVEL_WARN is not set -CONFIG_LOG_BOOTLOADER_LEVEL_INFO=y -# CONFIG_LOG_BOOTLOADER_LEVEL_DEBUG is not set -# CONFIG_LOG_BOOTLOADER_LEVEL_VERBOSE is not set -CONFIG_LOG_BOOTLOADER_LEVEL=3 -# CONFIG_APP_ROLLBACK_ENABLE is not set -# CONFIG_FLASH_ENCRYPTION_ENABLED is not set -CONFIG_FLASHMODE_QIO=y -# CONFIG_FLASHMODE_QOUT is not set -# CONFIG_FLASHMODE_DIO is not set -# CONFIG_FLASHMODE_DOUT is not set -# CONFIG_MONITOR_BAUD_9600B is not set -# CONFIG_MONITOR_BAUD_57600B is not set -CONFIG_MONITOR_BAUD_115200B=y -# CONFIG_MONITOR_BAUD_230400B is not set -# CONFIG_MONITOR_BAUD_921600B is not set -# CONFIG_MONITOR_BAUD_2MB is not set -# CONFIG_MONITOR_BAUD_OTHER is not set -CONFIG_MONITOR_BAUD_OTHER_VAL=115200 -CONFIG_MONITOR_BAUD=115200 -CONFIG_COMPILER_OPTIMIZATION_LEVEL_DEBUG=y -# CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE is not set -CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED=y -# CONFIG_OPTIMIZATION_ASSERTIONS_SILENT is not set -# CONFIG_OPTIMIZATION_ASSERTIONS_DISABLED is not set -CONFIG_OPTIMIZATION_ASSERTION_LEVEL=2 -# CONFIG_CXX_EXCEPTIONS is not set -CONFIG_STACK_CHECK_NONE=y -# CONFIG_STACK_CHECK_NORM is not set -# CONFIG_STACK_CHECK_STRONG is not set -# CONFIG_STACK_CHECK_ALL is not set -# CONFIG_WARN_WRITE_STRINGS is not set -# CONFIG_DISABLE_GCC8_WARNINGS is not set -# CONFIG_ESP32_APPTRACE_DEST_TRAX is not set -CONFIG_ESP32_APPTRACE_DEST_NONE=y -CONFIG_ESP32_APPTRACE_LOCK_ENABLE=y -CONFIG_ADC2_DISABLE_DAC=y -CONFIG_SPIRAM_SUPPORT=y -CONFIG_WIFI_LWIP_ALLOCATION_FROM_SPIRAM_FIRST=y -CONFIG_TRACEMEM_RESERVE_DRAM=0x0 -CONFIG_ULP_COPROC_ENABLED=y -CONFIG_ULP_COPROC_RESERVE_MEM=512 -CONFIG_BROWNOUT_DET=y -CONFIG_BROWNOUT_DET_LVL_SEL_0=y -# CONFIG_BROWNOUT_DET_LVL_SEL_1 is not set -# CONFIG_BROWNOUT_DET_LVL_SEL_2 is not set -# CONFIG_BROWNOUT_DET_LVL_SEL_3 is not set -# CONFIG_BROWNOUT_DET_LVL_SEL_4 is not set -# CONFIG_BROWNOUT_DET_LVL_SEL_5 is not set -# CONFIG_BROWNOUT_DET_LVL_SEL_6 is not set -# CONFIG_BROWNOUT_DET_LVL_SEL_7 is not set -CONFIG_BROWNOUT_DET_LVL=0 -CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC=y -# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_CRYSTAL is not set -# CONFIG_ESP32_RTC_CLOCK_SOURCE_EXTERNAL_OSC is not set -# CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_8MD256 is not set -CONFIG_DISABLE_BASIC_ROM_CONSOLE=y -# CONFIG_NO_BLOBS is not set -# CONFIG_COMPATIBLE_PRE_V2_1_BOOTLOADERS is not set -# CONFIG_EVENT_LOOP_PROFILING is not set -CONFIG_POST_EVENTS_FROM_ISR=y -CONFIG_POST_EVENTS_FROM_IRAM_ISR=y -# CONFIG_TWO_UNIVERSAL_MAC_ADDRESS is not set -CONFIG_FOUR_UNIVERSAL_MAC_ADDRESS=y -CONFIG_NUMBER_OF_UNIVERSAL_MAC_ADDRESS=4 -# CONFIG_ESP32C3_LIGHTSLEEP_GPIO_RESET_WORKAROUND is not set -CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE=y -# CONFIG_ESP32_PHY_INIT_DATA_IN_PARTITION is not set -CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER=20 -CONFIG_ESP32_PHY_MAX_TX_POWER=20 -CONFIG_ESP32_REDUCE_PHY_TX_POWER=y -CONFIG_ESP32S2_PANIC_PRINT_HALT=y -# CONFIG_ESP32S2_PANIC_PRINT_REBOOT is not set -# CONFIG_ESP32S2_PANIC_SILENT_REBOOT is not set -# CONFIG_ESP32S2_PANIC_GDBSTUB is not set -CONFIG_SYSTEM_EVENT_QUEUE_SIZE=32 -CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE=2304 -CONFIG_MAIN_TASK_STACK_SIZE=3584 -CONFIG_CONSOLE_UART_DEFAULT=y -# CONFIG_CONSOLE_UART_CUSTOM is not set -# CONFIG_ESP_CONSOLE_UART_NONE is not set -CONFIG_CONSOLE_UART=y -CONFIG_CONSOLE_UART_NUM=0 -CONFIG_CONSOLE_UART_BAUDRATE=115200 -CONFIG_INT_WDT=y -CONFIG_INT_WDT_TIMEOUT_MS=300 -CONFIG_INT_WDT_CHECK_CPU1=y -CONFIG_TASK_WDT=y -# CONFIG_TASK_WDT_PANIC is not set -CONFIG_TASK_WDT_TIMEOUT_S=5 -CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0=y -CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1=y -# CONFIG_ESP32_DEBUG_STUBS_ENABLE is not set -CONFIG_IPC_TASK_STACK_SIZE=1024 -CONFIG_TIMER_TASK_STACK_SIZE=3584 -# CONFIG_ESP32_ENABLE_COREDUMP_TO_FLASH is not set -# CONFIG_ESP32_ENABLE_COREDUMP_TO_UART is not set -CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE=y -CONFIG_MB_MASTER_TIMEOUT_MS_RESPOND=150 -CONFIG_MB_MASTER_DELAY_MS_CONVERT=200 -CONFIG_MB_QUEUE_LENGTH=20 -CONFIG_MB_SERIAL_TASK_STACK_SIZE=4096 -CONFIG_MB_SERIAL_BUF_SIZE=256 -CONFIG_MB_SERIAL_TASK_PRIO=10 -CONFIG_MB_CONTROLLER_SLAVE_ID_SUPPORT=y -CONFIG_MB_CONTROLLER_SLAVE_ID=0x00112233 -CONFIG_MB_CONTROLLER_NOTIFY_TIMEOUT=20 -CONFIG_MB_CONTROLLER_NOTIFY_QUEUE_SIZE=20 -CONFIG_MB_CONTROLLER_STACK_SIZE=4096 -CONFIG_MB_EVENT_QUEUE_TIMEOUT=20 -# CONFIG_MB_TIMER_PORT_ENABLED is not set -# CONFIG_ENABLE_STATIC_TASK_CLEAN_UP_HOOK is not set -CONFIG_TIMER_TASK_PRIORITY=1 -CONFIG_TIMER_TASK_STACK_DEPTH=2048 -CONFIG_TIMER_QUEUE_LENGTH=10 -# CONFIG_L2_TO_L3_COPY is not set -# CONFIG_USE_ONLY_LWIP_SELECT is not set -CONFIG_ESP_GRATUITOUS_ARP=y -CONFIG_GARP_TMR_INTERVAL=60 -CONFIG_TCPIP_RECVMBOX_SIZE=32 -CONFIG_TCP_MAXRTX=12 -CONFIG_TCP_SYNMAXRTX=12 -CONFIG_TCP_MSS=1440 -CONFIG_TCP_MSL=60000 -CONFIG_TCP_SND_BUF_DEFAULT=5744 -CONFIG_TCP_WND_DEFAULT=5744 -CONFIG_TCP_RECVMBOX_SIZE=6 -CONFIG_TCP_QUEUE_OOSEQ=y -# CONFIG_ESP_TCP_KEEP_CONNECTION_WHEN_IP_CHANGES is not set -CONFIG_TCP_OVERSIZE_MSS=y -# CONFIG_TCP_OVERSIZE_QUARTER_MSS is not set -# CONFIG_TCP_OVERSIZE_DISABLE is not set -CONFIG_UDP_RECVMBOX_SIZE=6 -CONFIG_TCPIP_TASK_STACK_SIZE=3072 -CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY=y -# CONFIG_TCPIP_TASK_AFFINITY_CPU0 is not set -# CONFIG_TCPIP_TASK_AFFINITY_CPU1 is not set -CONFIG_TCPIP_TASK_AFFINITY=0x7FFFFFFF -# CONFIG_PPP_SUPPORT is not set -CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT=5 -CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT=3072 -CONFIG_ESP32_PTHREAD_STACK_MIN=768 -CONFIG_ESP32_DEFAULT_PTHREAD_CORE_NO_AFFINITY=y -# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_0 is not set -# CONFIG_ESP32_DEFAULT_PTHREAD_CORE_1 is not set -CONFIG_ESP32_PTHREAD_TASK_CORE_DEFAULT=-1 -CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT="pthread" -CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS=y -# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_FAILS is not set -# CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ALLOWED is not set -CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT=y -CONFIG_SUPPORT_TERMIOS=y -CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS=1 -CONFIG_SEMIHOSTFS_HOST_PATH_MAX_LEN=128 -# End of deprecated options diff --git a/main/esp_efuse_custom_table.csv b/main/esp_efuse_custom_table.csv deleted file mode 100644 index e9b0b1d..0000000 --- a/main/esp_efuse_custom_table.csv +++ /dev/null @@ -1,16 +0,0 @@ -# After editing this file, run the command manually "make efuse_custom_table" or "idf.py efuse_custom_table" - -# WR_DIS_EFUSE_RD_DISABLE, EFUSE_BLK0, 0, 1, Write protection for RD_DIS, ADC_VREF -WR_DIS_WR_DIS, EFUSE_BLK0, 1, 1, Write protection for WR_DIS -# WR_DIS_FLASH_CRYPT_CNT, EFUSE_BLK0, 2, 1, Write protection for FLASH_CRYPT_CNT, UART_DOWNLOAD_DIS -WR_DIS_MAC_AND_CHIP_INFO, EFUSE_BLK0, 3, 1, Write protection for MAC, MAC_CRC, CIP_VER_REV1, CHIP_VERSION, CHIP_PACKAGE -WR_DIS_XPD, EFUSE_BLK0, 5, 1, Write protection for XPD_SDIO_FORCE, XPD_SDIO_REG, XPD_SDIO_TIEH -WR_DIS_SPI_PAD, EFUSE_BLK0, 6, 1, Write protection for CHIP_VER_REV2, SPI_PAD_CONFIG -# WR_DIS_BLK1, EFUSE_BLK0, 7, 1, Write protection for WR_DIS_BLK1 -# WR_DIS_BLK2, EFUSE_BLK0, 8, 1, Write protection for WR_DIS_BLK2 -# WR_DIS_BLK3, EFUSE_BLK0, 9, 1, Write protection for WR_DIS_BLK3, MAC_VERSION -WR_DIS_SCHEME_KEY_CRYPT, EFUSE_BLK0, 10, 1, Write protection for CODING_SCHEME, KEY_STATUS, FLASH_CRYPT_CONFIG, BLK3_PART_RESERVE -WR_DIS_ABS_DONE_0, EFUSE_BLK0, 12, 1, Write protection for ABS_DONE_0 -WR_DIS_ABS_DONE_1, EFUSE_BLK0, 13, 1, Write protection for ABS_DONE_1 -WR_DIS_JTAG_DISABLE, EFUSE_BLK0, 14, 1, Write protection for JTAG_DISABLE -WR_DIS_CONSOLE_DEBUG_AND_DISABLE_DL_CRYPT, EFUSE_BLK0, 15, 1, Write protection for CONSOLE_DEBUG_DISABLE, DISABLE_DL diff --git a/main/main.c b/main/main.c index 3d9617c..88a663f 100644 --- a/main/main.c +++ b/main/main.c @@ -33,6 +33,8 @@ #include "esp32/rom/crc.h" +#include "efuse.h" + static const char *TAG = "main"; typedef enum action { @@ -282,6 +284,8 @@ void app_main(void) { /* Initialize hardware */ + efuse_protect(); + bool lcdReady = false; res = board_init(&lcdReady); @@ -299,6 +303,7 @@ void app_main(void) { BNO055* bno055 = get_bno055(); RP2040* rp2040 = get_rp2040(); + /* Start AppFS */ graphics_task(pax_buffer, ili9341, framebuffer, NULL, "AppFS init..."); res = appfs_init(); if (res != ESP_OK) { @@ -308,6 +313,7 @@ void app_main(void) { } ESP_LOGI(TAG, "AppFS initialized"); + /* Start NVS */ graphics_task(pax_buffer, ili9341, framebuffer, NULL, "NVS init..."); res = nvs_init(); if (res != ESP_OK) { @@ -317,6 +323,7 @@ void app_main(void) { } ESP_LOGI(TAG, "NVS initialized"); + /* Start SD card */ graphics_task(pax_buffer, ili9341, framebuffer, NULL, "Mount SD card..."); res = mount_sd(SD_CMD, SD_CLK, SD_D0, SD_PWR, "/sd", false, 5); bool sdcard_ready = (res == ESP_OK); @@ -325,12 +332,15 @@ void app_main(void) { graphics_task(pax_buffer, ili9341, framebuffer, NULL, "SD card mounted"); } + /* Start LEDs */ ws2812_init(GPIO_LED_DATA); uint8_t ledBuffer[15] = {50, 0, 0, 50, 0, 0, 50, 0, 0, 50, 0, 0, 50, 0, 0}; ws2812_send_data(ledBuffer, sizeof(ledBuffer)); + /* Start RP2040 firmware update check */ rp2040_updater(rp2040, pax_buffer, ili9341, framebuffer); + /* Launcher menu */ while (true) { menu_action_t menu_action; appfs_handle_t appfs_fd;