mirrors/gstreamer
mirrors/gstreamer
1
1
Fork 0
mirror of https://gitlab.freedesktop.org/gstreamer/gstreamer.git synced 2024-12-11 10:56:38 +00:00
Code Issues 1 Projects Releases Wiki Activity
gstreamer/subprojects/gst-plugins-bad/ext/sctp/usrsctp/usrsctplib/netinet/sctp.h

672 lines
24 KiB
C
Raw Blame History

/*-
* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (c) 2001-2008, by Cisco Systems, Inc. All rights reserved.
* Copyright (c) 2008-2012, by Randall Stewart. All rights reserved.
* Copyright (c) 2008-2012, by Michael Tuexen. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* a) Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* b) Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the distribution.
*
* c) Neither the name of Cisco Systems, Inc. nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
* THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
#if defined(__FreeBSD__) && !defined(__Userspace__)
#include <sys/cdefs.h>
__FBSDID("$FreeBSD: head/sys/netinet/sctp.h 356357 2020-01-04 20:33:12Z tuexen $");
#endif
#ifndef _NETINET_SCTP_H_
#define _NETINET_SCTP_H_
#if defined(__APPLE__) || defined(__linux__)
#include <stdint.h>
#endif
#include <sys/types.h>
#if !defined(_WIN32)
#define SCTP_PACKED __attribute__((packed))
#else
#pragma pack (push, 1)
#define SCTP_PACKED
#endif
/*
* SCTP protocol - RFC4960.
*/
struct sctphdr {
uint16_t src_port; /* source port */
uint16_t dest_port; /* destination port */
uint32_t v_tag; /* verification tag of packet */
uint32_t checksum; /* CRC32C checksum */
/* chunks follow... */
} SCTP_PACKED;
/*
* SCTP Chunks
*/
struct sctp_chunkhdr {
uint8_t chunk_type; /* chunk type */
uint8_t chunk_flags; /* chunk flags */
uint16_t chunk_length; /* chunk length */
/* optional params follow */
} SCTP_PACKED;
/*
* SCTP chunk parameters
*/
struct sctp_paramhdr {
uint16_t param_type; /* parameter type */
uint16_t param_length; /* parameter length */
} SCTP_PACKED;
/*
* user socket options: socket API defined
*/
/*
* read-write options
*/
#define SCTP_RTOINFO 0x00000001
#define SCTP_ASSOCINFO 0x00000002
#define SCTP_INITMSG 0x00000003
#define SCTP_NODELAY 0x00000004
#define SCTP_AUTOCLOSE 0x00000005
#define SCTP_SET_PEER_PRIMARY_ADDR 0x00000006
#define SCTP_PRIMARY_ADDR 0x00000007
#define SCTP_ADAPTATION_LAYER 0x00000008
/* same as above */
#define SCTP_ADAPTION_LAYER 0x00000008
#define SCTP_DISABLE_FRAGMENTS 0x00000009
#define SCTP_PEER_ADDR_PARAMS 0x0000000a
#define SCTP_DEFAULT_SEND_PARAM 0x0000000b
/* ancillary data/notification interest options */
#define SCTP_EVENTS 0x0000000c /* deprecated */
/* Without this applied we will give V4 and V6 addresses on a V6 socket */
#define SCTP_I_WANT_MAPPED_V4_ADDR 0x0000000d
#define SCTP_MAXSEG 0x0000000e
#define SCTP_DELAYED_SACK 0x0000000f
#define SCTP_FRAGMENT_INTERLEAVE 0x00000010
#define SCTP_PARTIAL_DELIVERY_POINT 0x00000011
/* authentication support */
#define SCTP_AUTH_CHUNK 0x00000012
#define SCTP_AUTH_KEY 0x00000013
#define SCTP_HMAC_IDENT 0x00000014
#define SCTP_AUTH_ACTIVE_KEY 0x00000015
#define SCTP_AUTH_DELETE_KEY 0x00000016
#define SCTP_USE_EXT_RCVINFO 0x00000017
#define SCTP_AUTO_ASCONF 0x00000018 /* rw */
#define SCTP_MAXBURST 0x00000019 /* rw */
#define SCTP_MAX_BURST 0x00000019 /* rw */
/* assoc level context */
#define SCTP_CONTEXT 0x0000001a /* rw */
/* explicit EOR signalling */
#define SCTP_EXPLICIT_EOR 0x0000001b
#define SCTP_REUSE_PORT 0x0000001c /* rw */
#define SCTP_AUTH_DEACTIVATE_KEY 0x0000001d
#define SCTP_EVENT 0x0000001e
#define SCTP_RECVRCVINFO 0x0000001f
#define SCTP_RECVNXTINFO 0x00000020
#define SCTP_DEFAULT_SNDINFO 0x00000021
#define SCTP_DEFAULT_PRINFO 0x00000022
#define SCTP_PEER_ADDR_THLDS 0x00000023
#define SCTP_REMOTE_UDP_ENCAPS_PORT 0x00000024
#define SCTP_ECN_SUPPORTED 0x00000025
#define SCTP_PR_SUPPORTED 0x00000026
#define SCTP_AUTH_SUPPORTED 0x00000027
#define SCTP_ASCONF_SUPPORTED 0x00000028
#define SCTP_RECONFIG_SUPPORTED 0x00000029
#define SCTP_NRSACK_SUPPORTED 0x00000030
#define SCTP_PKTDROP_SUPPORTED 0x00000031
#define SCTP_MAX_CWND 0x00000032
/*
* read-only options
*/
#define SCTP_STATUS 0x00000100
#define SCTP_GET_PEER_ADDR_INFO 0x00000101
/* authentication support */
#define SCTP_PEER_AUTH_CHUNKS 0x00000102
#define SCTP_LOCAL_AUTH_CHUNKS 0x00000103
#define SCTP_GET_ASSOC_NUMBER 0x00000104 /* ro */
#define SCTP_GET_ASSOC_ID_LIST 0x00000105 /* ro */
#define SCTP_TIMEOUTS 0x00000106
#define SCTP_PR_STREAM_STATUS 0x00000107
#define SCTP_PR_ASSOC_STATUS 0x00000108
/*
* user socket options: BSD implementation specific
*/
/*
* Blocking I/O is enabled on any TCP type socket by default. For the UDP
* model if this is turned on then the socket buffer is shared for send
* resources amongst all associations. The default for the UDP model is that
* is SS_NBIO is set. Which means all associations have a separate send
* limit BUT they will NOT ever BLOCK instead you will get an error back
* EAGAIN if you try to send too much. If you want the blocking semantics you
* set this option at the cost of sharing one socket send buffer size amongst
* all associations. Peeled off sockets turn this option off and block. But
* since both TCP and peeled off sockets have only one assoc per socket this
* is fine. It probably does NOT make sense to set this on SS_NBIO on a TCP
* model OR peeled off UDP model, but we do allow you to do so. You just use
* the normal syscall to toggle SS_NBIO the way you want.
*
* Blocking I/O is controlled by the SS_NBIO flag on the socket state so_state
* field.
*/
#define SCTP_ENABLE_STREAM_RESET 0x00000900 /* struct sctp_assoc_value */
#define SCTP_RESET_STREAMS 0x00000901 /* struct sctp_reset_streams */
#define SCTP_RESET_ASSOC 0x00000902 /* sctp_assoc_t */
#define SCTP_ADD_STREAMS 0x00000903 /* struct sctp_add_streams */
/* For enable stream reset */
#define SCTP_ENABLE_RESET_STREAM_REQ 0x00000001
#define SCTP_ENABLE_RESET_ASSOC_REQ 0x00000002
#define SCTP_ENABLE_CHANGE_ASSOC_REQ 0x00000004
#define SCTP_ENABLE_VALUE_MASK 0x00000007
/* For reset streams */
#define SCTP_STREAM_RESET_INCOMING 0x00000001
#define SCTP_STREAM_RESET_OUTGOING 0x00000002
/* here on down are more implementation specific */
#define SCTP_SET_DEBUG_LEVEL 0x00001005
#define SCTP_CLR_STAT_LOG 0x00001007
/* CMT ON/OFF socket option */
#define SCTP_CMT_ON_OFF 0x00001200
#define SCTP_CMT_USE_DAC 0x00001201
/* JRS - Pluggable Congestion Control Socket option */
#define SCTP_PLUGGABLE_CC 0x00001202
/* RS - Pluggable Stream Scheduling Socket option */
#define SCTP_PLUGGABLE_SS 0x00001203
#define SCTP_SS_VALUE 0x00001204
#define SCTP_CC_OPTION 0x00001205 /* Options for CC modules */
/* For I-DATA */
#define SCTP_INTERLEAVING_SUPPORTED 0x00001206
/* read only */
#define SCTP_GET_SNDBUF_USE 0x00001101
#define SCTP_GET_STAT_LOG 0x00001103
#define SCTP_PCB_STATUS 0x00001104
#define SCTP_GET_NONCE_VALUES 0x00001105
/* Special hook for dynamically setting primary for all assoc's,
* this is a write only option that requires root privilege.
*/
#define SCTP_SET_DYNAMIC_PRIMARY 0x00002001
/* VRF (virtual router feature) and multi-VRF support
* options. VRF's provide splits within a router
* that give the views of multiple routers. A
* standard host, without VRF support, is just
* a single VRF. If VRF's are supported then
* the transport must be VRF aware. This means
* that every socket call coming in must be directed
* within the endpoint to one of the VRF's it belongs
* to. The endpoint, before binding, may select
* the "default" VRF it is in by using a set socket
* option with SCTP_VRF_ID. This will also
* get propagated to the default VRF. Once the
* endpoint binds an address then it CANNOT add
* additional VRF's to become a Multi-VRF endpoint.
*
* Before BINDING additional VRF's can be added with
* the SCTP_ADD_VRF_ID call or deleted with
* SCTP_DEL_VRF_ID.
*
* Associations are ALWAYS contained inside a single
* VRF. They cannot reside in two (or more) VRF's. Incoming
* packets, assuming the router is VRF aware, can always
* tell us what VRF they arrived on. A host not supporting
* any VRF's will find that the packets always arrived on the
* single VRF that the host has.
*
*/
#define SCTP_VRF_ID 0x00003001
#define SCTP_ADD_VRF_ID 0x00003002
#define SCTP_GET_VRF_IDS 0x00003003
#define SCTP_GET_ASOC_VRF 0x00003004
#define SCTP_DEL_VRF_ID 0x00003005
/*
* If you enable packet logging you can get
* a poor mans ethereal output in binary
* form. Note this is a compile option to
* the kernel, SCTP_PACKET_LOGGING, and
* without it in your kernel you
* will get a EOPNOTSUPP
*/
#define SCTP_GET_PACKET_LOG 0x00004001
/*
* hidden implementation specific options these are NOT user visible (should
* move out of sctp.h)
*/
/* sctp_bindx() flags as hidden socket options */
#define SCTP_BINDX_ADD_ADDR 0x00008001
#define SCTP_BINDX_REM_ADDR 0x00008002
/* Hidden socket option that gets the addresses */
#define SCTP_GET_PEER_ADDRESSES 0x00008003
#define SCTP_GET_LOCAL_ADDRESSES 0x00008004
/* return the total count in bytes needed to hold all local addresses bound */
#define SCTP_GET_LOCAL_ADDR_SIZE 0x00008005
/* Return the total count in bytes needed to hold the remote address */
#define SCTP_GET_REMOTE_ADDR_SIZE 0x00008006
/* hidden option for connectx */
#define SCTP_CONNECT_X 0x00008007
/* hidden option for connectx_delayed, part of sendx */
#define SCTP_CONNECT_X_DELAYED 0x00008008
#define SCTP_CONNECT_X_COMPLETE 0x00008009
/* hidden socket option based sctp_peeloff */
#define SCTP_PEELOFF 0x0000800a
/* the real worker for sctp_getaddrlen() */
#define SCTP_GET_ADDR_LEN 0x0000800b
#if defined(__APPLE__) && !defined(__Userspace__)
/* temporary workaround for Apple listen() issue, no args used */
#define SCTP_LISTEN_FIX 0x0000800c
#endif
#if defined(_WIN32) && !defined(__Userspace__)
/* workaround for Cygwin on Windows: returns the SOCKET handle */
#define SCTP_GET_HANDLE 0x0000800d
#endif
/* Debug things that need to be purged */
#define SCTP_SET_INITIAL_DBG_SEQ 0x00009f00
/* JRS - Supported congestion control modules for pluggable
* congestion control
*/
/* Standard TCP Congestion Control */
#define SCTP_CC_RFC2581 0x00000000
/* High Speed TCP Congestion Control (Floyd) */
#define SCTP_CC_HSTCP 0x00000001
/* HTCP Congestion Control */
#define SCTP_CC_HTCP 0x00000002
/* RTCC Congestion Control - RFC2581 plus */
#define SCTP_CC_RTCC 0x00000003
#define SCTP_CC_OPT_RTCC_SETMODE 0x00002000
#define SCTP_CC_OPT_USE_DCCC_ECN 0x00002001
#define SCTP_CC_OPT_STEADY_STEP 0x00002002
#define SCTP_CMT_OFF 0
#define SCTP_CMT_BASE 1
#define SCTP_CMT_RPV1 2
#define SCTP_CMT_RPV2 3
#define SCTP_CMT_MPTCP 4
#define SCTP_CMT_MAX SCTP_CMT_MPTCP
/* RS - Supported stream scheduling modules for pluggable
* stream scheduling
*/
/* Default simple round-robin */
#define SCTP_SS_DEFAULT 0x00000000
/* Real round-robin */
#define SCTP_SS_ROUND_ROBIN 0x00000001
/* Real round-robin per packet */
#define SCTP_SS_ROUND_ROBIN_PACKET 0x00000002
/* Priority */
#define SCTP_SS_PRIORITY 0x00000003
/* Fair Bandwidth */
#define SCTP_SS_FAIR_BANDWITH 0x00000004
/* First-come, first-serve */
#define SCTP_SS_FIRST_COME 0x00000005
/* fragment interleave constants
* setting must be one of these or
* EINVAL returned.
*/
#define SCTP_FRAG_LEVEL_0 0x00000000
#define SCTP_FRAG_LEVEL_1 0x00000001
#define SCTP_FRAG_LEVEL_2 0x00000002
/*
* user state values
*/
#define SCTP_CLOSED 0x0000
#define SCTP_BOUND 0x1000
#define SCTP_LISTEN 0x2000
#define SCTP_COOKIE_WAIT 0x0002
#define SCTP_COOKIE_ECHOED 0x0004
#define SCTP_ESTABLISHED 0x0008
#define SCTP_SHUTDOWN_SENT 0x0010
#define SCTP_SHUTDOWN_RECEIVED 0x0020
#define SCTP_SHUTDOWN_ACK_SENT 0x0040
#define SCTP_SHUTDOWN_PENDING 0x0080
/*
* SCTP operational error codes (user visible)
*/
#define SCTP_CAUSE_NO_ERROR 0x0000
#define SCTP_CAUSE_INVALID_STREAM 0x0001
#define SCTP_CAUSE_MISSING_PARAM 0x0002
#define SCTP_CAUSE_STALE_COOKIE 0x0003
#define SCTP_CAUSE_OUT_OF_RESC 0x0004
#define SCTP_CAUSE_UNRESOLVABLE_ADDR 0x0005
#define SCTP_CAUSE_UNRECOG_CHUNK 0x0006
#define SCTP_CAUSE_INVALID_PARAM 0x0007
#define SCTP_CAUSE_UNRECOG_PARAM 0x0008
#define SCTP_CAUSE_NO_USER_DATA 0x0009
#define SCTP_CAUSE_COOKIE_IN_SHUTDOWN 0x000a
#define SCTP_CAUSE_RESTART_W_NEWADDR 0x000b
#define SCTP_CAUSE_USER_INITIATED_ABT 0x000c
#define SCTP_CAUSE_PROTOCOL_VIOLATION 0x000d
/* Error causes from RFC5061 */
#define SCTP_CAUSE_DELETING_LAST_ADDR 0x00a0
#define SCTP_CAUSE_RESOURCE_SHORTAGE 0x00a1
#define SCTP_CAUSE_DELETING_SRC_ADDR 0x00a2
#define SCTP_CAUSE_ILLEGAL_ASCONF_ACK 0x00a3
#define SCTP_CAUSE_REQUEST_REFUSED 0x00a4
/* Error causes from nat-draft */
#define SCTP_CAUSE_NAT_COLLIDING_STATE 0x00b0
#define SCTP_CAUSE_NAT_MISSING_STATE 0x00b1
/* Error causes from RFC4895 */
#define SCTP_CAUSE_UNSUPPORTED_HMACID 0x0105
/*
* error cause parameters (user visible)
*/
struct sctp_gen_error_cause {
uint16_t code;
uint16_t length;
uint8_t info[];
} SCTP_PACKED;
struct sctp_error_cause {
uint16_t code;
uint16_t length;
/* optional cause-specific info may follow */
} SCTP_PACKED;
struct sctp_error_invalid_stream {
struct sctp_error_cause cause; /* code=SCTP_CAUSE_INVALID_STREAM */
uint16_t stream_id; /* stream id of the DATA in error */
uint16_t reserved;
} SCTP_PACKED;
struct sctp_error_missing_param {
struct sctp_error_cause cause; /* code=SCTP_CAUSE_MISSING_PARAM */
uint32_t num_missing_params; /* number of missing parameters */
uint16_t type[];
} SCTP_PACKED;
struct sctp_error_stale_cookie {
struct sctp_error_cause cause; /* code=SCTP_CAUSE_STALE_COOKIE */
uint32_t stale_time; /* time in usec of staleness */
} SCTP_PACKED;
struct sctp_error_out_of_resource {
struct sctp_error_cause cause; /* code=SCTP_CAUSE_OUT_OF_RESOURCES */
} SCTP_PACKED;
struct sctp_error_unresolv_addr {
struct sctp_error_cause cause; /* code=SCTP_CAUSE_UNRESOLVABLE_ADDR */
} SCTP_PACKED;
struct sctp_error_unrecognized_chunk {
struct sctp_error_cause cause; /* code=SCTP_CAUSE_UNRECOG_CHUNK */
struct sctp_chunkhdr ch;/* header from chunk in error */
} SCTP_PACKED;
struct sctp_error_no_user_data {
struct sctp_error_cause cause; /* code=SCTP_CAUSE_NO_USER_DATA */
uint32_t tsn; /* TSN of the empty data chunk */
} SCTP_PACKED;
struct sctp_error_auth_invalid_hmac {
struct sctp_error_cause cause; /* code=SCTP_CAUSE_UNSUPPORTED_HMACID */
uint16_t hmac_id;
} SCTP_PACKED;
/*
* Main SCTP chunk types we place these here so natd and f/w's in user land
* can find them.
*/
/************0x00 series ***********/
#define SCTP_DATA 0x00
#define SCTP_INITIATION 0x01
#define SCTP_INITIATION_ACK 0x02
#define SCTP_SELECTIVE_ACK 0x03
#define SCTP_HEARTBEAT_REQUEST 0x04
#define SCTP_HEARTBEAT_ACK 0x05
#define SCTP_ABORT_ASSOCIATION 0x06
#define SCTP_SHUTDOWN 0x07
#define SCTP_SHUTDOWN_ACK 0x08
#define SCTP_OPERATION_ERROR 0x09
#define SCTP_COOKIE_ECHO 0x0a
#define SCTP_COOKIE_ACK 0x0b
#define SCTP_ECN_ECHO 0x0c
#define SCTP_ECN_CWR 0x0d
#define SCTP_SHUTDOWN_COMPLETE 0x0e
/* RFC4895 */
#define SCTP_AUTHENTICATION 0x0f
/* EY nr_sack chunk id*/
#define SCTP_NR_SELECTIVE_ACK 0x10
/************0x40 series ***********/
#define SCTP_IDATA 0x40
/************0x80 series ***********/
/* RFC5061 */
#define SCTP_ASCONF_ACK 0x80
/* draft-ietf-stewart-pktdrpsctp */
#define SCTP_PACKET_DROPPED 0x81
/* draft-ietf-stewart-strreset-xxx */
#define SCTP_STREAM_RESET 0x82
/* RFC4820 */
#define SCTP_PAD_CHUNK 0x84
/************0xc0 series ***********/
/* RFC3758 */
#define SCTP_FORWARD_CUM_TSN 0xc0
/* RFC5061 */
#define SCTP_ASCONF 0xc1
#define SCTP_IFORWARD_CUM_TSN 0xc2
/* ABORT and SHUTDOWN COMPLETE FLAG */
#define SCTP_HAD_NO_TCB 0x01
/* Packet dropped flags */
#define SCTP_FROM_MIDDLE_BOX SCTP_HAD_NO_TCB
#define SCTP_BADCRC 0x02
#define SCTP_PACKET_TRUNCATED 0x04
/* Flag for ECN -CWR */
#define SCTP_CWR_REDUCE_OVERRIDE 0x01
#define SCTP_CWR_IN_SAME_WINDOW 0x02
#define SCTP_SAT_NETWORK_MIN 400 /* min ms for RTT to set satellite
* time */
#define SCTP_SAT_NETWORK_BURST_INCR 2 /* how many times to multiply maxburst
* in sat */
/* Data Chuck Specific Flags */
#define SCTP_DATA_FRAG_MASK 0x03
#define SCTP_DATA_MIDDLE_FRAG 0x00
#define SCTP_DATA_LAST_FRAG 0x01
#define SCTP_DATA_FIRST_FRAG 0x02
#define SCTP_DATA_NOT_FRAG 0x03
#define SCTP_DATA_UNORDERED 0x04
#define SCTP_DATA_SACK_IMMEDIATELY 0x08
/* ECN Nonce: SACK Chunk Specific Flags */
#define SCTP_SACK_NONCE_SUM 0x01
/* CMT DAC algorithm SACK flag */
#define SCTP_SACK_CMT_DAC 0x80
/*
* PCB flags (in sctp_flags bitmask).
* Note the features and flags are meant
* for use by netstat.
*/
#define SCTP_PCB_FLAGS_UDPTYPE 0x00000001
#define SCTP_PCB_FLAGS_TCPTYPE 0x00000002
#define SCTP_PCB_FLAGS_BOUNDALL 0x00000004
#define SCTP_PCB_FLAGS_ACCEPTING 0x00000008
#define SCTP_PCB_FLAGS_UNBOUND 0x00000010
#define SCTP_PCB_FLAGS_SND_ITERATOR_UP 0x00000020
#define SCTP_PCB_FLAGS_CLOSE_IP 0x00040000
#define SCTP_PCB_FLAGS_WAS_CONNECTED 0x00080000
#define SCTP_PCB_FLAGS_WAS_ABORTED 0x00100000
/* TCP model support */
#define SCTP_PCB_FLAGS_CONNECTED 0x00200000
#define SCTP_PCB_FLAGS_IN_TCPPOOL 0x00400000
#define SCTP_PCB_FLAGS_DONT_WAKE 0x00800000
#define SCTP_PCB_FLAGS_WAKEOUTPUT 0x01000000
#define SCTP_PCB_FLAGS_WAKEINPUT 0x02000000
#define SCTP_PCB_FLAGS_BOUND_V6 0x04000000
#define SCTP_PCB_FLAGS_BLOCKING_IO 0x08000000
#define SCTP_PCB_FLAGS_SOCKET_GONE 0x10000000
#define SCTP_PCB_FLAGS_SOCKET_ALLGONE 0x20000000
#define SCTP_PCB_FLAGS_SOCKET_CANT_READ 0x40000000
#if defined(__Userspace__)
#define SCTP_PCB_FLAGS_BOUND_CONN 0x80000000
/* flags to copy to new PCB */
#define SCTP_PCB_COPY_FLAGS (SCTP_PCB_FLAGS_BOUNDALL|\
SCTP_PCB_FLAGS_WAKEINPUT|\
SCTP_PCB_FLAGS_BOUND_V6|\
SCTP_PCB_FLAGS_BOUND_CONN)
#else
/* flags to copy to new PCB */
#define SCTP_PCB_COPY_FLAGS (SCTP_PCB_FLAGS_BOUNDALL|\
SCTP_PCB_FLAGS_WAKEINPUT|\
SCTP_PCB_FLAGS_BOUND_V6)
#endif
/*
* PCB Features (in sctp_features bitmask)
*/
#define SCTP_PCB_FLAGS_DO_NOT_PMTUD 0x0000000000000001
#define SCTP_PCB_FLAGS_EXT_RCVINFO 0x0000000000000002 /* deprecated */
#define SCTP_PCB_FLAGS_DONOT_HEARTBEAT 0x0000000000000004
#define SCTP_PCB_FLAGS_FRAG_INTERLEAVE 0x0000000000000008
#define SCTP_PCB_FLAGS_INTERLEAVE_STRMS 0x0000000000000010
#define SCTP_PCB_FLAGS_DO_ASCONF 0x0000000000000020
#define SCTP_PCB_FLAGS_AUTO_ASCONF 0x0000000000000040
/* socket options */
#define SCTP_PCB_FLAGS_NODELAY 0x0000000000000100
#define SCTP_PCB_FLAGS_AUTOCLOSE 0x0000000000000200
#define SCTP_PCB_FLAGS_RECVDATAIOEVNT 0x0000000000000400 /* deprecated */
#define SCTP_PCB_FLAGS_RECVASSOCEVNT 0x0000000000000800
#define SCTP_PCB_FLAGS_RECVPADDREVNT 0x0000000000001000
#define SCTP_PCB_FLAGS_RECVPEERERR 0x0000000000002000
#define SCTP_PCB_FLAGS_RECVSENDFAILEVNT 0x0000000000004000 /* deprecated */
#define SCTP_PCB_FLAGS_RECVSHUTDOWNEVNT 0x0000000000008000
#define SCTP_PCB_FLAGS_ADAPTATIONEVNT 0x0000000000010000
#define SCTP_PCB_FLAGS_PDAPIEVNT 0x0000000000020000
#define SCTP_PCB_FLAGS_AUTHEVNT 0x0000000000040000
#define SCTP_PCB_FLAGS_STREAM_RESETEVNT 0x0000000000080000
#define SCTP_PCB_FLAGS_NO_FRAGMENT 0x0000000000100000
#define SCTP_PCB_FLAGS_EXPLICIT_EOR 0x0000000000400000
#define SCTP_PCB_FLAGS_NEEDS_MAPPED_V4 0x0000000000800000
#define SCTP_PCB_FLAGS_MULTIPLE_ASCONFS 0x0000000001000000
#define SCTP_PCB_FLAGS_PORTREUSE 0x0000000002000000
#define SCTP_PCB_FLAGS_DRYEVNT 0x0000000004000000
#define SCTP_PCB_FLAGS_RECVRCVINFO 0x0000000008000000
#define SCTP_PCB_FLAGS_RECVNXTINFO 0x0000000010000000
#define SCTP_PCB_FLAGS_ASSOC_RESETEVNT 0x0000000020000000
#define SCTP_PCB_FLAGS_STREAM_CHANGEEVNT 0x0000000040000000
#define SCTP_PCB_FLAGS_RECVNSENDFAILEVNT 0x0000000080000000
/*-
* mobility_features parameters (by micchie).Note
* these features are applied against the
* sctp_mobility_features flags.. not the sctp_features
* flags.
*/
#define SCTP_MOBILITY_BASE 0x00000001
#define SCTP_MOBILITY_FASTHANDOFF 0x00000002
#define SCTP_MOBILITY_PRIM_DELETED 0x00000004
/* Smallest PMTU allowed when disabling PMTU discovery */
#define SCTP_SMALLEST_PMTU 512
/* Largest PMTU allowed when disabling PMTU discovery */
#define SCTP_LARGEST_PMTU 65536
#if defined(_WIN32)
#pragma pack(pop)
#endif
#undef SCTP_PACKED
#include <netinet/sctp_uio.h>
/* This dictates the size of the packet
* collection buffer. This only applies
* if SCTP_PACKET_LOGGING is enabled in
* your config.
*/
#define SCTP_PACKET_LOG_SIZE 65536
/* Maximum delays and such a user can set for options that
* take ms.
*/
#define SCTP_MAX_SACK_DELAY 500 /* per RFC4960 */
#define SCTP_MAX_HB_INTERVAL 14400000 /* 4 hours in ms */
#define SCTP_MAX_COOKIE_LIFE 3600000 /* 1 hour in ms */
/* Types of logging/KTR tracing that can be enabled via the
* sysctl net.inet.sctp.sctp_logging. You must also enable
* SUBSYS tracing.
* Note that you must have the SCTP option in the kernel
* to enable these as well.
*/
#define SCTP_BLK_LOGGING_ENABLE 0x00000001
#define SCTP_CWND_MONITOR_ENABLE 0x00000002
#define SCTP_CWND_LOGGING_ENABLE 0x00000004
#define SCTP_FLIGHT_LOGGING_ENABLE 0x00000020
#define SCTP_FR_LOGGING_ENABLE 0x00000040
#define SCTP_LOCK_LOGGING_ENABLE 0x00000080
#define SCTP_MAP_LOGGING_ENABLE 0x00000100
#define SCTP_MBCNT_LOGGING_ENABLE 0x00000200
#define SCTP_MBUF_LOGGING_ENABLE 0x00000400
#define SCTP_NAGLE_LOGGING_ENABLE 0x00000800
#define SCTP_RECV_RWND_LOGGING_ENABLE 0x00001000
#define SCTP_RTTVAR_LOGGING_ENABLE 0x00002000
#define SCTP_SACK_LOGGING_ENABLE 0x00004000
#define SCTP_SACK_RWND_LOGGING_ENABLE 0x00008000
#define SCTP_SB_LOGGING_ENABLE 0x00010000
#define SCTP_STR_LOGGING_ENABLE 0x00020000
#define SCTP_WAKE_LOGGING_ENABLE 0x00040000
#define SCTP_LOG_MAXBURST_ENABLE 0x00080000
#define SCTP_LOG_RWND_ENABLE 0x00100000
#define SCTP_LOG_SACK_ARRIVALS_ENABLE 0x00200000
#define SCTP_LTRACE_CHUNK_ENABLE 0x00400000
#define SCTP_LTRACE_ERROR_ENABLE 0x00800000
#define SCTP_LAST_PACKET_TRACING 0x01000000
#define SCTP_THRESHOLD_LOGGING 0x02000000
#define SCTP_LOG_AT_SEND_2_SCTP 0x04000000
#define SCTP_LOG_AT_SEND_2_OUTQ 0x08000000
#define SCTP_LOG_TRY_ADVANCE 0x10000000
#endif /* !_NETINET_SCTP_H_ */
Reference in a new issue View git blame Copy permalink