mirrors/gstreamer
mirrors/gstreamer
1
1
Fork 0
mirror of https://gitlab.freedesktop.org/gstreamer/gstreamer.git synced 2024-12-11 19:06:33 +00:00
Code Issues 1 Projects Releases Wiki Activity
gstreamer/tests/check/ges/timelineedition.c
Henry Wilkes 39097f5574 timeline-tree: simplify and fix editing 
Editing has been simplified by breaking down each edit into a
combination of three basic single-element edits: MOVE, TRIM_START, and
TRIM_END.

Each edit follows these steps:
+ Determine which elements are to be edited and under which basic mode
+ Determine which track elements will move as a result
+ Snap the edit position to one of the edges of the main edited element,
  (or the edge of one of its descendants, in the case of MOVE), avoiding
  moving elements.
  NOTE: in particular, we can *not* snap to the edge of a neighbouring
  element in a roll edit. This was previously possible, even though the
  neighbour was moving!
+ Determine the edit positions for clips (or track elements with no
  parent) using the snapped value. In addition, we replace any edits of
  a group with an edit of its descendant clips. If any value would be
  out of bounds (e.g. negative start) we do not edit.
  NOTE: this is now done *after* checking the snapping. This allows the
  edit to succeed if snapping would cause it to go from being invalid to
  valid!
+ Determine whether the collection of edits would result in a valid
  timeline-configuration which does not break the rules for sources
  overlapping.
+ If all this succeeds, we emit snapping-started on the timeline.
+ We then perform all the edits. At this point they should all succeed.

The simplification/unification should make it easier to make other
changes.

Fixes https://gitlab.freedesktop.org/gstreamer/gst-editing-services/-/issues/97
Fixes https://gitlab.freedesktop.org/gstreamer/gst-editing-services/-/issues/98

Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-editing-services/-/merge_requests/169>
2020-05-07 09:37:15 +01:00

1160 lines
40 KiB
C
Raw Blame History

/* GStreamer Editing Services
*
* Copyright (C) <2012> Thibault Saunier <thibault.saunier@collabora.com>
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Library General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Library General Public License for more details.
*
* You should have received a copy of the GNU Library General Public
* License along with this library; if not, write to the
* Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
* Boston, MA 02110-1301, USA.
*/
#include "test-utils.h"
#include <ges/ges.h>
#include <gst/check/gstcheck.h>
#define DEEP_CHECK(element, start, inpoint, duration) \
{ \
GList *track_elements, *tmp; \
CHECK_OBJECT_PROPS (element, start, inpoint, duration) \
\
track_elements = GES_CONTAINER_CHILDREN (element); \
for (tmp = track_elements; tmp; tmp = tmp->next) { \
CHECK_OBJECT_PROPS (tmp->data, start, inpoint, duration) \
} \
}
#define CHECK_CLIP(element, start, inpoint, duration, layer_prio) \
{ \
DEEP_CHECK(element, start, inpoint, duration);\
check_layer (element, layer_prio); \
}\
GST_START_TEST (test_basic_timeline_edition)
{
GESAsset *asset;
GESTrack *track;
GESTimeline *timeline;
GESLayer *layer;
GESTrackElement *trackelement, *trackelement1, *trackelement2;
GESContainer *clip, *clip1, *clip2;
ges_init ();
track = GES_TRACK (ges_audio_track_new ());
fail_unless (track != NULL);
timeline = ges_timeline_new ();
fail_unless (timeline != NULL);
fail_unless (ges_timeline_add_track (timeline, track));
layer = ges_layer_new ();
fail_unless (layer != NULL);
fail_unless (ges_timeline_add_layer (timeline, layer));
asset = ges_asset_request (GES_TYPE_TEST_CLIP, NULL, NULL);
fail_unless (GES_IS_ASSET (asset));
/**
* Our timeline
*
* inpoints 0------- 0-------- 0-----------
* | clip | | clip1 | | clip2 |
* time 0------- 10 --------20 50---------60
*/
clip = GES_CONTAINER (ges_layer_add_asset (layer, asset, 0, 0, 10,
GES_TRACK_TYPE_UNKNOWN));
trackelement = GES_CONTAINER_CHILDREN (clip)->data;
fail_unless (GES_IS_TRACK_ELEMENT (trackelement));
clip1 = GES_CONTAINER (ges_layer_add_asset (layer, asset, 10, 0, 10,
GES_TRACK_TYPE_UNKNOWN));
trackelement1 = GES_CONTAINER_CHILDREN (clip1)->data;
fail_unless (GES_IS_TRACK_ELEMENT (trackelement1));
clip2 = GES_CONTAINER (ges_layer_add_asset (layer, asset, 50, 0, 60,
GES_TRACK_TYPE_UNKNOWN));
g_object_unref (asset);
trackelement2 = GES_CONTAINER_CHILDREN (clip2)->data;
fail_unless (GES_IS_TRACK_ELEMENT (trackelement2));
CHECK_OBJECT_PROPS (trackelement, 0, 0, 10);
CHECK_OBJECT_PROPS (trackelement1, 10, 0, 10);
CHECK_OBJECT_PROPS (trackelement2, 50, 0, 60);
/**
* Simple rippling clip to: 10
*
* New timeline:
* ------------
*
* inpoints 0------- 0-------- 0-----------
* | clip | | clip1 | | clip2 |
* time 10------- 20 --------30 60---------120
*/
fail_unless (ges_container_edit (clip, NULL, -1, GES_EDIT_MODE_RIPPLE,
GES_EDGE_NONE, 10) == TRUE);
CHECK_OBJECT_PROPS (trackelement, 10, 0, 10);
CHECK_OBJECT_PROPS (trackelement1, 20, 0, 10);
CHECK_OBJECT_PROPS (trackelement2, 60, 0, 60);
/* FIXME find a way to check that we are using the same MovingContext
* inside the GESTrack */
fail_unless (ges_container_edit (clip1, NULL, -1, GES_EDIT_MODE_RIPPLE,
GES_EDGE_NONE, 40) == TRUE);
CHECK_OBJECT_PROPS (trackelement, 10, 0, 10);
CHECK_OBJECT_PROPS (trackelement1, 40, 0, 10);
CHECK_OBJECT_PROPS (trackelement2, 80, 0, 60);
/**
* Rippling clip1 back to: 20 (getting to the exact same timeline as before
*/
fail_unless (ges_container_edit (clip1, NULL, -1, GES_EDIT_MODE_RIPPLE,
GES_EDGE_NONE, 20) == TRUE);
CHECK_OBJECT_PROPS (trackelement, 10, 0, 10);
CHECK_OBJECT_PROPS (trackelement1, 20, 0, 10);
CHECK_OBJECT_PROPS (trackelement2, 60, 0, 60);
/**
* Simple move clip to: 27 and clip2 to 35
*
* New timeline:
* ------------
* 0------------
* inpoints 0-------|--- clip 0--|----------
* | clip1 27 -|-----|-37 clip2 |
* time 20-----------30 35-------------120
*/
fail_unless (ges_container_edit (clip, NULL, -1, GES_EDIT_MODE_NORMAL,
GES_EDGE_NONE, 27) == TRUE);
fail_unless (ges_container_edit (clip2, NULL, -1, GES_EDIT_MODE_NORMAL,
GES_EDGE_NONE, 35) == TRUE);
CHECK_OBJECT_PROPS (trackelement, 27, 0, 10);
CHECK_OBJECT_PROPS (trackelement1, 20, 0, 10);
CHECK_OBJECT_PROPS (trackelement2, 35, 0, 60);
/**
* Trim start clip to: 32 and clip2 to 35
*
* New timeline:
* ------------
* 5--------
* inpoints 0----------- | clip 0--|----------
* | clip1 | 32----|-37 clip2 |
* time 20-----------30 35-------------120
*/
fail_unless (ges_container_edit (clip, NULL, -1, GES_EDIT_MODE_TRIM,
GES_EDGE_START, 32) == TRUE);
CHECK_OBJECT_PROPS (trackelement, 32, 5, 5);
CHECK_OBJECT_PROPS (trackelement1, 20, 0, 10);
CHECK_OBJECT_PROPS (trackelement2, 35, 0, 60);
/* Ripple end clip to 42
* New timeline:
* ------------
* 5--------
* inpoints 0----------- | clip 0--|----------
* | clip1 | 32----|-42 clip2 |
* time 20-----------30 35-------------120
*/
fail_unless (ges_container_edit (clip, NULL, -1, GES_EDIT_MODE_RIPPLE,
GES_EDGE_END, 42) == TRUE);
CHECK_OBJECT_PROPS (trackelement, 32, 5, 10);
CHECK_OBJECT_PROPS (trackelement1, 20, 0, 10);
CHECK_OBJECT_PROPS (trackelement2, 35, 0, 60);
/**
* New timeline:
* ------------
* inpoints 0------- 5-------- 0-----------
* | clip1 | | clip1 || clip2 |
* time 20-------30 32--------52 ---------112
*/
fail_unless (ges_container_edit (clip2, NULL, -1, GES_EDIT_MODE_NORMAL,
GES_EDGE_NONE, 42) == TRUE);
fail_unless (ges_container_edit (clip, NULL, -1, GES_EDIT_MODE_RIPPLE,
GES_EDGE_END, 52) == TRUE);
CHECK_OBJECT_PROPS (trackelement, 32, 5, 20);
CHECK_OBJECT_PROPS (trackelement1, 20, 0, 10);
CHECK_OBJECT_PROPS (trackelement2, 52, 0, 60);
/**
* New timeline:
* ------------
* inpoints 0------- 5-------- 0------------
* | clip1 | | clip || clip2 |
* time 20-------40 42--------62 ---------122
*/
fail_unless (ges_container_edit (clip1, NULL, -1, GES_EDIT_MODE_RIPPLE,
GES_EDGE_END, 40) == TRUE);
CHECK_OBJECT_PROPS (trackelement, 42, 5, 20);
CHECK_OBJECT_PROPS (trackelement1, 20, 0, 20);
CHECK_OBJECT_PROPS (trackelement2, 62, 0, 60);
/**
* New timeline:
* ------------
* inpoints 0------- 3-------- 0------------
* | clip1 || clip || clip2 |
* time 20-------40 --------62 ---------122
*/
fail_unless (ges_container_edit (clip, NULL, -1, GES_EDIT_MODE_TRIM,
GES_EDGE_START, 40) == TRUE);
CHECK_OBJECT_PROPS (trackelement, 40, 3, 22);
CHECK_OBJECT_PROPS (trackelement1, 20, 0, 20);
CHECK_OBJECT_PROPS (trackelement2, 62, 0, 60);
/**
* New timeline:
* ------------
* inpoints 0------- 0-------- 0-----------
* | clip1 || clip || clip2 |
* time 20------ 25 ------ 62 ---------122
*/
fail_if (ges_container_edit (clip, NULL, -1, GES_EDIT_MODE_ROLL,
GES_EDGE_START, 25));
CHECK_OBJECT_PROPS (trackelement, 40, 3, 22);
CHECK_OBJECT_PROPS (trackelement1, 20, 0, 20);
CHECK_OBJECT_PROPS (trackelement2, 62, 0, 60);
/* Make sure that not doing anything when not able to roll */
fail_if (ges_container_edit (clip1, NULL, -1, GES_EDIT_MODE_ROLL,
GES_EDGE_END, 65) == TRUE, 0);
CHECK_OBJECT_PROPS (trackelement, 40, 3, 22);
CHECK_OBJECT_PROPS (trackelement1, 20, 0, 20);
CHECK_OBJECT_PROPS (trackelement2, 62, 0, 60);
gst_object_unref (timeline);
ges_deinit ();
}
GST_END_TEST;
GST_START_TEST (test_snapping)
{
GESTrack *track;
GESTimeline *timeline;
GESTrackElement *trackelement, *trackelement1, *trackelement2;
GESContainer *clip, *clip1, *clip2;
GESLayer *layer;
GList *trackelements;
ges_init ();
track = GES_TRACK (ges_video_track_new ());
fail_unless (track != NULL);
timeline = ges_timeline_new ();
fail_unless (timeline != NULL);
fail_unless (ges_timeline_add_track (timeline, track));
clip = GES_CONTAINER (ges_test_clip_new ());
clip1 = GES_CONTAINER (ges_test_clip_new ());
clip2 = GES_CONTAINER (ges_test_clip_new ());
fail_unless (clip && clip1 && clip2);
/**
* Our timeline
* ------------
* inpoints 0------- 0-------- 0-----------
* | clip1 || clip || clip2 |
* time 20------ 25 ------ 62 ---------122
*/
g_object_set (clip, "start", (guint64) 25, "duration", (guint64) 37,
"in-point", (guint64) 0, NULL);
g_object_set (clip1, "start", (guint64) 20, "duration", (guint64) 15,
"in-point", (guint64) 0, NULL);
g_object_set (clip2, "start", (guint64) 62, "duration", (guint64) 60,
"in-point", (guint64) 0, NULL);
fail_unless ((layer = ges_timeline_append_layer (timeline)) != NULL);
assert_equals_int (ges_layer_get_priority (layer), 0);
fail_unless (ges_layer_add_clip (layer, GES_CLIP (clip)));
fail_unless ((trackelements = GES_CONTAINER_CHILDREN (clip)) != NULL);
fail_unless ((trackelement =
GES_TRACK_ELEMENT (trackelements->data)) != NULL);
fail_unless (ges_track_element_get_track (trackelement) == track);
assert_equals_uint64 (_DURATION (trackelement), 37);
ASSERT_OBJECT_REFCOUNT (trackelement, "track + timeline + clip", 3);
ASSERT_OBJECT_REFCOUNT (clip, "layer + timeline", 2);
fail_unless (ges_layer_add_clip (layer, GES_CLIP (clip1)));
fail_unless ((trackelements = GES_CONTAINER_CHILDREN (clip1)) != NULL);
fail_unless ((trackelement1 =
GES_TRACK_ELEMENT (trackelements->data)) != NULL);
fail_unless (ges_track_element_get_track (trackelement1) == track);
assert_equals_uint64 (_DURATION (trackelement1), 15);
/* Same ref logic */
ASSERT_OBJECT_REFCOUNT (trackelement1, "First trackelement", 3);
ASSERT_OBJECT_REFCOUNT (clip1, "First clip", 2);
fail_unless (ges_layer_add_clip (layer, GES_CLIP (clip2)));
fail_unless ((trackelements = GES_CONTAINER_CHILDREN (clip2)) != NULL);
fail_unless ((trackelement2 =
GES_TRACK_ELEMENT (trackelements->data)) != NULL);
fail_unless (ges_track_element_get_track (trackelement2) == track);
assert_equals_uint64 (_DURATION (trackelement2), 60);
/* Same ref logic */
ASSERT_OBJECT_REFCOUNT (trackelement2, "First trackelement", 3);
ASSERT_OBJECT_REFCOUNT (clip2, "First clip", 2);
/* Snaping to edge, so no move */
g_object_set (timeline, "snapping-distance", (guint64) 3, NULL);
fail_unless (ges_container_edit (clip1, NULL, -1, GES_EDIT_MODE_TRIM,
GES_EDGE_END, 27) == TRUE);
CHECK_OBJECT_PROPS (trackelement, 25, 0, 37);
CHECK_OBJECT_PROPS (trackelement1, 20, 0, 5);
CHECK_OBJECT_PROPS (trackelement2, 62, 0, 60);
/* Snaping to edge, so no move */
ges_container_edit (clip1, NULL, -1, GES_EDIT_MODE_TRIM, GES_EDGE_END, 27);
CHECK_OBJECT_PROPS (trackelement, 25, 0, 37);
CHECK_OBJECT_PROPS (trackelement1, 20, 0, 5);
CHECK_OBJECT_PROPS (trackelement2, 62, 0, 60);
/**
* New timeline:
* ------------
* 0----------- 0-------------
* inpoints 0-------|-- clip || clip2 |
* | clip1 25-|------- 62 -----------122
* time 20----------30
*/
g_object_set (timeline, "snapping-distance", (guint64) 0, NULL);
ges_timeline_element_set_duration (GES_TIMELINE_ELEMENT (clip1), 10);
DEEP_CHECK (clip, 25, 0, 37);
DEEP_CHECK (clip1, 20, 0, 10);
DEEP_CHECK (clip2, 62, 0, 60);
/* clip and clip1 would fully overlap ... forbiden */
fail_if (ges_timeline_element_roll_end (GES_TIMELINE_ELEMENT (clip1), 62));
DEEP_CHECK (clip, 25, 0, 37);
DEEP_CHECK (clip1, 20, 0, 10);
DEEP_CHECK (clip2, 62, 0, 60);
fail_if (ges_timeline_element_roll_end (GES_TIMELINE_ELEMENT (clip1),
72) == TRUE);
DEEP_CHECK (clip, 25, 0, 37);
DEEP_CHECK (clip1, 20, 0, 10);
DEEP_CHECK (clip2, 62, 0, 60);
/**
* 30-------+0-------------+
* inpoints 0-----------5 clip || clip2 |
* | clip1 |------- 62 -----------122
* time 20----------30
*/
g_object_set (timeline, "snapping-distance", (guint64) 4, NULL);
fail_unless (ges_timeline_element_trim (GES_TIMELINE_ELEMENT (clip),
28) == TRUE);
DEEP_CHECK (clip, 30, 5, 32);
DEEP_CHECK (clip1, 20, 0, 10);
DEEP_CHECK (clip2, 62, 0, 60);
/**
* 30-------+0-------------+
* inpoints 0-----------5 clip || clip2 |
* | clip1 |------- 62 -----------122
* time 20----------30
*/
fail_unless (ges_timeline_element_set_inpoint (GES_TIMELINE_ELEMENT (clip2),
5));
DEEP_CHECK (clip, 30, 5, 32);
DEEP_CHECK (clip1, 20, 0, 10);
DEEP_CHECK (clip2, 62, 5, 60);
/**
* 30-------+0-------------+
* inpoints 0-----------5 clip || clip2 |
* | clip1 |------- 62 -----------122
* time 20----------30
*/
/* Moving clip1 to 26 would lead to snapping to 30, and clip1 and clip
* would fully overlap */
fail_if (ges_container_edit (clip1, NULL, -1, GES_EDIT_MODE_NORMAL,
GES_EDGE_NONE, 26) == TRUE);
DEEP_CHECK (clip, 30, 5, 32);
DEEP_CHECK (clip1, 20, 0, 10);
DEEP_CHECK (clip2, 62, 5, 60);
/**
* 30-------+0-------------+
* inpoints 5 clip || clip2 |-------------+
* +------- 62 -----------122 clip1 |
* time +------------132
* Check that clip1 snaps with the end of clip2 */
fail_unless (ges_container_edit (clip1, NULL, -1, GES_EDIT_MODE_NORMAL,
GES_EDGE_NONE, 125) == TRUE);
DEEP_CHECK (clip, 30, 5, 32);
DEEP_CHECK (clip1, 122, 0, 10);
DEEP_CHECK (clip2, 62, 5, 60);
/* Check we didn't lose/screwed any references */
ASSERT_OBJECT_REFCOUNT (trackelement, "First trackelement", 3);
ASSERT_OBJECT_REFCOUNT (trackelement1, "Second trackelement", 3);
ASSERT_OBJECT_REFCOUNT (trackelement2, "Third trackelement", 3);
ASSERT_OBJECT_REFCOUNT (clip, "First clip", 2);
ASSERT_OBJECT_REFCOUNT (clip1, "Second clip", 2);
ASSERT_OBJECT_REFCOUNT (clip2, "Third clip", 2);
check_destroyed (G_OBJECT (timeline), G_OBJECT (trackelement),
trackelement1, trackelement2, clip, clip1, clip2, layer, NULL);
ges_deinit ();
}
GST_END_TEST;
static void
asset_added_cb (GESProject * project, GESAsset * asset, void *mainloop)
{
GstDiscovererInfo *info;
info = ges_uri_clip_asset_get_info (GES_URI_CLIP_ASSET (asset));
fail_unless (GST_IS_DISCOVERER_INFO (info));
g_main_loop_quit ((GMainLoop *) mainloop);
}
GST_START_TEST (test_simple_triming)
{
GList *assets, *tmp;
GMainLoop *mainloop;
GESClipAsset *asset;
GESProject *project;
GESTimeline *timeline;
GESLayer *layer;
GESTimelineElement *element;
gchar *uri;
ges_init ();
uri = ges_test_file_uri ("audio_video.ogg");
project = ges_project_new (NULL);
mainloop = g_main_loop_new (NULL, FALSE);
g_signal_connect (project, "asset-added", (GCallback) asset_added_cb,
mainloop);
ges_project_create_asset (project, uri, GES_TYPE_URI_CLIP);
g_free (uri);
g_main_loop_run (mainloop);
/* the asset is now loaded */
timeline = ges_timeline_new_audio_video ();
assets = ges_project_list_assets (project, GES_TYPE_CLIP);
assert_equals_int (g_list_length (assets), 1);
asset = assets->data;
layer = ges_layer_new ();
ges_timeline_add_layer (timeline, layer);
ges_layer_add_asset (layer, GES_ASSET (asset), 0, 0, 10,
ges_clip_asset_get_supported_formats (asset));
g_list_free_full (assets, g_object_unref);
tmp = ges_layer_get_clips (layer);
element = tmp->data;
DEEP_CHECK (element, 0, 0, 10);
ges_container_edit (GES_CONTAINER (element), NULL, -1, GES_EDIT_MODE_TRIM,
GES_EDGE_START, 5);
DEEP_CHECK (element, 5, 5, 5);
g_list_free_full (tmp, g_object_unref);
g_main_loop_unref (mainloop);
gst_object_unref (timeline);
gst_object_unref (project);
ges_deinit ();
}
GST_END_TEST;
GST_START_TEST (test_timeline_edition_mode)
{
GESTrack *track;
GESTimeline *timeline;
GESTrackElement *trackelement, *trackelement1, *trackelement2;
GESContainer *clip, *clip1, *clip2;
GESLayer *layer, *layer1, *layer2;
GList *trackelements, *layers, *tmp;
ges_init ();
track = GES_TRACK (ges_video_track_new ());
fail_unless (track != NULL);
timeline = ges_timeline_new ();
fail_unless (timeline != NULL);
fail_unless (ges_timeline_add_track (timeline, track));
clip = GES_CONTAINER (ges_test_clip_new ());
clip1 = GES_CONTAINER (ges_test_clip_new ());
clip2 = GES_CONTAINER (ges_test_clip_new ());
fail_unless (clip && clip1 && clip2);
/**
* Our timeline
*
* 0-------
* layer: | clip |
* 0-------10
*
* 0-------- 0-----------
* layer1: | clip1 | | clip2 |
* 10--------20 50---------60
*/
g_object_set (clip, "start", (guint64) 0, "duration", (guint64) 10,
"in-point", (guint64) 0, NULL);
g_object_set (clip1, "start", (guint64) 10, "duration", (guint64) 10,
"in-point", (guint64) 0, NULL);
g_object_set (clip2, "start", (guint64) 50, "duration", (guint64) 60,
"in-point", (guint64) 0, NULL);
fail_unless ((layer = ges_timeline_append_layer (timeline)) != NULL);
assert_equals_int (ges_layer_get_priority (layer), 0);
fail_unless (ges_layer_add_clip (layer, GES_CLIP (clip)));
fail_unless ((trackelements = GES_CONTAINER_CHILDREN (clip)) != NULL);
fail_unless ((trackelement =
GES_TRACK_ELEMENT (trackelements->data)) != NULL);
fail_unless (ges_track_element_get_track (trackelement) == track);
assert_equals_uint64 (_DURATION (trackelement), 10);
/* Add a new layer and add clipects to it */
fail_unless ((layer1 = ges_timeline_append_layer (timeline)) != NULL);
fail_unless (layer != layer1);
assert_equals_int (ges_layer_get_priority (layer1), 1);
fail_unless (ges_layer_add_clip (layer1, GES_CLIP (clip1)));
fail_unless ((trackelements = GES_CONTAINER_CHILDREN (clip1)) != NULL);
fail_unless ((trackelement1 =
GES_TRACK_ELEMENT (trackelements->data)) != NULL);
fail_unless (ges_track_element_get_track (trackelement1) == track);
assert_equals_uint64 (_DURATION (trackelement1), 10);
fail_unless (ges_layer_add_clip (layer1, GES_CLIP (clip2)));
fail_unless ((trackelements = GES_CONTAINER_CHILDREN (clip2)) != NULL);
fail_unless ((trackelement2 =
GES_TRACK_ELEMENT (trackelements->data)) != NULL);
fail_unless (ges_track_element_get_track (trackelement2) == track);
assert_equals_uint64 (_DURATION (trackelement2), 60);
/**
* Simple rippling clip to: 10
*
* New timeline:
* ------------
*
* inpoints 0-------
* | clip |
* time 10-------20
*
* 0-------- 0-----------
* | clip1 | | clip2 |
* 20--------30 60--------120
*/
fail_unless (ges_container_edit (clip, NULL, -1, GES_EDIT_MODE_RIPPLE,
GES_EDGE_NONE, 10) == TRUE);
CHECK_OBJECT_PROPS (trackelement, 10, 0, 10);
CHECK_OBJECT_PROPS (trackelement1, 20, 0, 10);
CHECK_OBJECT_PROPS (trackelement2, 60, 0, 60);
/* FIXME find a way to check that we are using the same MovingContext
* inside the GESTimeline */
fail_unless (ges_container_edit (clip1, NULL, 3, GES_EDIT_MODE_RIPPLE,
GES_EDGE_NONE, 40) == TRUE);
CHECK_OBJECT_PROPS (trackelement, 10, 0, 10);
CHECK_OBJECT_PROPS (trackelement1, 40, 0, 10);
CHECK_OBJECT_PROPS (trackelement2, 80, 0, 60);
layer2 = ges_clip_get_layer (GES_CLIP (clip1));
assert_equals_int (ges_layer_get_priority (layer2), 3);
/* clip2 should have moved layer too */
fail_unless (ges_clip_get_layer (GES_CLIP (clip2)) == layer2);
/* We got 2 reference to the same clipect, unref them */
gst_object_unref (layer2);
gst_object_unref (layer2);
/**
* Rippling clip1 back to: 20 (getting to the exact same timeline as before
*/
fail_unless (ges_container_edit (clip1, NULL, 1, GES_EDIT_MODE_RIPPLE,
GES_EDGE_NONE, 20) == TRUE);
CHECK_OBJECT_PROPS (trackelement, 10, 0, 10);
CHECK_OBJECT_PROPS (trackelement1, 20, 0, 10);
CHECK_OBJECT_PROPS (trackelement2, 60, 0, 60);
layer2 = ges_clip_get_layer (GES_CLIP (clip1));
assert_equals_int (ges_layer_get_priority (layer2), 1);
/* clip2 should have moved layer too */
fail_unless (ges_clip_get_layer (GES_CLIP (clip2)) == layer2);
/* We got 2 reference to the same clipect, unref them */
gst_object_unref (layer2);
gst_object_unref (layer2);
/**
* Simple move clip to 27 and clip2 to 35
*
* New timeline:
* ------------
*
* inpoints 0-------
* | clip |
* time 27-------37
*
* 0-------- 0-----------
* | clip1 | | clip2 |
* 20--------30 35---------95
*/
fail_unless (ges_container_edit (clip, NULL, -1, GES_EDIT_MODE_NORMAL,
GES_EDGE_NONE, 27) == TRUE);
fail_unless (ges_container_edit (clip2, NULL, -1, GES_EDIT_MODE_NORMAL,
GES_EDGE_NONE, 35) == TRUE);
CHECK_OBJECT_PROPS (trackelement, 27, 0, 10);
CHECK_OBJECT_PROPS (trackelement1, 20, 0, 10);
CHECK_OBJECT_PROPS (trackelement2, 35, 0, 60);
/**
* Simple trimming start clip to: 32
*
* New timeline:
* ------------
*
* 5-------
* layer 0: | clip |
* 32-------37
*
* 0-------- 0-----------
* layer 1 | clip1 | | clip2 |
* 20--------30 35---------95
*/
fail_unless (ges_container_edit (clip, NULL, -1, GES_EDIT_MODE_TRIM,
GES_EDGE_START, 32) == TRUE);
CHECK_OBJECT_PROPS (trackelement, 32, 5, 5);
CHECK_OBJECT_PROPS (trackelement1, 20, 0, 10);
CHECK_OBJECT_PROPS (trackelement2, 35, 0, 60);
/* Ripple end clip to 35 and move to layer 2
* New timeline:
* ------------
*
* 0-------- 0-----------
* layer 1: | clip1 | | clip2 |
* 20--------30 35---------95
*
* 5------
* layer 2: | clip |
* 32------35
*/
fail_unless (ges_container_edit (clip, NULL, 2, GES_EDIT_MODE_RIPPLE,
GES_EDGE_END, 35) == TRUE);
CHECK_OBJECT_PROPS (trackelement, 32, 5, 3);
CHECK_OBJECT_PROPS (trackelement1, 20, 0, 10);
CHECK_OBJECT_PROPS (trackelement2, 35, 0, 60);
assert_equals_int (GES_TIMELINE_ELEMENT_LAYER_PRIORITY (clip), 2);
/* Roll end clip to 50
* New timeline:
* ------------
*
* 0-------- 0-----------
* layer 1: | clip1 | | clip2 |
* 20--------30 50---------95
*
* 5------
* layer 2: | clip |
* 32------50
*/
fail_unless (ges_container_edit (clip, NULL, 2, GES_EDIT_MODE_ROLL,
GES_EDGE_END, 50) == TRUE);
CHECK_OBJECT_PROPS (trackelement, 32, 5, 18);
CHECK_OBJECT_PROPS (trackelement1, 20, 0, 10);
CHECK_OBJECT_PROPS (trackelement2, 50, 15, 45);
layer = ges_clip_get_layer (GES_CLIP (clip));
assert_equals_int (ges_layer_get_priority (layer), 2);
gst_object_unref (layer);
/* Roll end clip back to 35
* New timeline:
* ------------
*
* 0-------- 0-----------
* layer 1: | clip1 | | clip2 |
* 20--------30 35---------95
*
* 5------
* layer 2: | clip |
* 32------35
*/
fail_unless (ges_container_edit (clip, NULL, 2, GES_EDIT_MODE_ROLL,
GES_EDGE_END, 35) == TRUE);
CHECK_OBJECT_PROPS (trackelement, 32, 5, 3);
CHECK_OBJECT_PROPS (trackelement1, 20, 0, 10);
CHECK_OBJECT_PROPS (trackelement2, 35, 0, 60);
layer = ges_clip_get_layer (GES_CLIP (clip));
assert_equals_int (ges_layer_get_priority (layer), 2);
gst_object_unref (layer);
/* Roll end clip back to 35 */
/* Can not move to the first layer as clip2 should move to a layer with priority < 0 */
fail_if (ges_container_edit (clip, NULL, 0, GES_EDIT_MODE_RIPPLE,
GES_EDGE_END, 52));
CHECK_OBJECT_PROPS (trackelement, 32, 5, 3);
CHECK_OBJECT_PROPS (trackelement1, 20, 0, 10);
CHECK_OBJECT_PROPS (trackelement2, 35, 0, 60);
assert_equals_int (GES_TIMELINE_ELEMENT_LAYER_PRIORITY (clip), 2);
/* Ripple clip end to 52
* New timeline:
* ------------
*
* 0-------- 0----------
* layer 1: | clip1 | | clip2 |
* 20-------30 52---------112
*
* 5------
* layer 2: | clip |
* 32------52
*
*/
fail_unless (ges_container_edit (clip, NULL, -1, GES_EDIT_MODE_RIPPLE,
GES_EDGE_END, 52) == TRUE);
CHECK_OBJECT_PROPS (trackelement, 32, 5, 20);
CHECK_OBJECT_PROPS (trackelement1, 20, 0, 10);
CHECK_OBJECT_PROPS (trackelement2, 52, 0, 60);
assert_equals_int (GES_TIMELINE_ELEMENT_LAYER_PRIORITY (clip), 2);
/* Little check that we have 4 layers in the timeline */
layers = ges_timeline_get_layers (timeline);
assert_equals_int (g_list_length (layers), 4);
/* Some refcount checkings */
/* We have a reference to each layer in layers */
for (tmp = layers; tmp; tmp = tmp->next)
ASSERT_OBJECT_REFCOUNT (layer, "Layer", 2);
g_list_free_full (layers, gst_object_unref);
/* We have 3 references:
* track + timeline + clip
*/
ASSERT_OBJECT_REFCOUNT (trackelement, "First trackelement", 3);
ASSERT_OBJECT_REFCOUNT (trackelement1, "Second trackelement", 3);
ASSERT_OBJECT_REFCOUNT (trackelement2, "Third trackelement", 3);
ASSERT_OBJECT_REFCOUNT (clip, "First clip", 2);
ASSERT_OBJECT_REFCOUNT (clip1, "Second clip", 2);
ASSERT_OBJECT_REFCOUNT (clip2, "Third clip", 2);
/* Ripple clip end to 52
* New timeline:
* ------------
*
* 0-------- 0-----------
* layer 0: | clip1 | | clip2 |
* 20-------40 62----------112
*
* 5------
* layer 1: | clip |
* 42------60
*
*/
fail_unless (ges_container_edit (clip1, NULL, 0, GES_EDIT_MODE_RIPPLE,
GES_EDGE_END, 40) == TRUE);
CHECK_OBJECT_PROPS (trackelement, 42, 5, 20);
CHECK_OBJECT_PROPS (trackelement1, 20, 0, 20);
CHECK_OBJECT_PROPS (trackelement2, 62, 0, 60);
/* Check that movement between layer has been done properly */
layer1 = ges_clip_get_layer (GES_CLIP (clip));
layer = ges_clip_get_layer (GES_CLIP (clip1));
assert_equals_int (ges_layer_get_priority (layer1), 1);
assert_equals_int (ges_layer_get_priority (layer), 0);
fail_unless (ges_clip_get_layer (GES_CLIP (clip2)) == layer);
gst_object_unref (layer1);
/* We have 2 references to @layer that we do not need anymore */ ;
gst_object_unref (layer);
gst_object_unref (layer);
/* Trim clip start to 40
* New timeline:
* ------------
*
* 0-------- 0-----------
* layer 0: | clip1 | | clip2 |
* 20-------40 62---------112
*
* 0------
* layer 1: | clip |
* 40------62
*
*/
fail_unless (ges_container_edit (clip, NULL, -1, GES_EDIT_MODE_TRIM,
GES_EDGE_START, 40) == TRUE);
CHECK_OBJECT_PROPS (trackelement, 40, 3, 22);
CHECK_OBJECT_PROPS (trackelement1, 20, 0, 20);
CHECK_OBJECT_PROPS (trackelement2, 62, 0, 60);
/* Roll clip end to 25
* New timeline:
* ------------
*
* 0-------- 0-----------
* layer 0: | clip1 | | clip2 |
* 20-------25 62---------112
*
* 0------
* layer 1: | clip |
* 25------62
*
*/
ges_timeline_element_set_inpoint (GES_TIMELINE_ELEMENT (clip), 15);
fail_unless (ges_container_edit (clip1, NULL, -1, GES_EDIT_MODE_ROLL,
GES_EDGE_END, 25) == TRUE);
CHECK_OBJECT_PROPS (trackelement, 25, 0, 37);
CHECK_OBJECT_PROPS (trackelement1, 20, 0, 5);
CHECK_OBJECT_PROPS (trackelement2, 62, 0, 60);
/* Make sure that not doing anything when not able to roll */
fail_if (ges_container_edit (clip, NULL, -1, GES_EDIT_MODE_ROLL,
GES_EDGE_START, 65));
fail_if (ges_container_edit (clip1, NULL, -1, GES_EDIT_MODE_ROLL,
GES_EDGE_END, 65));
CHECK_OBJECT_PROPS (trackelement, 25, 0, 37);
CHECK_OBJECT_PROPS (trackelement1, 20, 0, 5);
CHECK_OBJECT_PROPS (trackelement2, 62, 0, 60);
/* Snaping to edge, so no move */
g_object_set (timeline, "snapping-distance", (guint64) 3, NULL);
ges_container_edit (clip1, NULL, -1, GES_EDIT_MODE_TRIM, GES_EDGE_END, 27);
CHECK_OBJECT_PROPS (trackelement, 25, 0, 37);
CHECK_OBJECT_PROPS (trackelement1, 20, 0, 5);
CHECK_OBJECT_PROPS (trackelement2, 62, 0, 60);
/* Snaping to edge, so no move */
ges_container_edit (clip1, NULL, -1, GES_EDIT_MODE_TRIM, GES_EDGE_END, 27);
CHECK_OBJECT_PROPS (trackelement, 25, 0, 37);
CHECK_OBJECT_PROPS (trackelement1, 20, 0, 5);
CHECK_OBJECT_PROPS (trackelement2, 62, 0, 60);
/**
* New timeline:
* ------------
* 0----------- 0-------------
* inpoints 0-------|-- clip || clip2 |
* | clip1 25-|------- 62 -----------122
* time 20----------30
*/
g_object_set (timeline, "snapping-distance", (guint64) 0, NULL);
fail_unless (ges_container_edit (clip1, NULL, -1, GES_EDIT_MODE_TRIM,
GES_EDGE_END, 30) == TRUE);
CHECK_OBJECT_PROPS (trackelement, 25, 0, 37);
CHECK_OBJECT_PROPS (trackelement1, 20, 0, 10);
CHECK_OBJECT_PROPS (trackelement2, 62, 0, 60);
/**
* New timeline
* ------------
* 0----------
* | clip |
* 25---------62
* -------------------------------------------------
* inpoints 0----------------------- 10--------
* | clip1 || clip2 |
* time 20---------------------- 72 --------122
*/
/* Rolling involves only neighbours that are currently snapping */
ges_container_edit (clip1, NULL, -1, GES_EDIT_MODE_ROLL, GES_EDGE_END, 62);
fail_unless (ges_container_edit (clip1, NULL, -1, GES_EDIT_MODE_ROLL,
GES_EDGE_END, 72) == TRUE);
CHECK_OBJECT_PROPS (trackelement, 25, 0, 37);
CHECK_OBJECT_PROPS (trackelement1, 20, 0, 52);
CHECK_OBJECT_PROPS (trackelement2, 72, 10, 50);
/* Test Snapping */
/**
* 0----------
* | clip |
* 25---------62
* inpoints 5--------------- 10--------
* | clip1 || clip2 |
* time 25------------- 72 --------122
*/
g_object_set (timeline, "snapping-distance", (guint64) 4, NULL);
fail_unless (ges_container_edit (clip1, NULL, -1, GES_EDIT_MODE_TRIM,
GES_EDGE_START, 28) == TRUE);
CHECK_OBJECT_PROPS (trackelement, 25, 0, 37);
CHECK_OBJECT_PROPS (trackelement1, 25, 5, 47);
CHECK_OBJECT_PROPS (trackelement2, 72, 10, 50);
ges_deinit ();
}
GST_END_TEST;
GST_START_TEST (test_groups)
{
GESAsset *asset;
GESTimeline *timeline;
GESGroup *group;
GESLayer *layer, *layer1, *layer2, *layer3;
GESClip *c, *c1, *c2, *c3, *c4, *c5;
GList *clips = NULL;
ges_init ();
timeline = ges_timeline_new_audio_video ();
/* Our timeline
*
* --0------------10-Group-----20---------------30-----------------------70
* | +-----------+ |+-----------50 |
* L | | C | || C3 | |
* | +-----------+ |+-----------+ |
* --|-------------------------------------------|-----40----------------|
* | +------------+ +-------------+ | +--------60 |
* L1 | | C1 | | C2 | | | C4 | |
* | +------------+ +-------------+ | +--------+ |
* --|-------------------------------------------|-----------------------|
* | | +--------+|
* L2 | | | c5 ||
* | | +--------+|
* --+-------------------------------------------+-----------------------+
*
* L3
*
* -----------------------------------------------------------------------
*/
layer = ges_timeline_append_layer (timeline);
layer1 = ges_timeline_append_layer (timeline);
layer2 = ges_timeline_append_layer (timeline);
layer3 = ges_timeline_append_layer (timeline);
assert_equals_int (ges_layer_get_priority (layer3), 3);
asset = ges_asset_request (GES_TYPE_TEST_CLIP, NULL, NULL);
c = ges_layer_add_asset (layer, asset, 0, 0, 10, GES_TRACK_TYPE_UNKNOWN);
c1 = ges_layer_add_asset (layer1, asset, 10, 0, 10, GES_TRACK_TYPE_UNKNOWN);
c2 = ges_layer_add_asset (layer1, asset, 20, 0, 10, GES_TRACK_TYPE_UNKNOWN);
clips = g_list_prepend (clips, c);
clips = g_list_prepend (clips, c1);
clips = g_list_prepend (clips, c2);
group = GES_GROUP (ges_container_group (clips));
fail_unless (GES_TIMELINE_ELEMENT_TIMELINE (group) == timeline);
g_list_free (clips);
fail_unless (GES_IS_GROUP (group));
CHECK_CLIP (c, 0, 0, 10, 0);
CHECK_CLIP (c1, 10, 0, 10, 1);
CHECK_CLIP (c2, 20, 0, 10, 1);
CHECK_OBJECT_PROPS (group, 0, 0, 30);
c3 = ges_layer_add_asset (layer, asset, 30, 0, 20, GES_TRACK_TYPE_UNKNOWN);
c4 = ges_layer_add_asset (layer1, asset, 40, 0, 20, GES_TRACK_TYPE_UNKNOWN);
c5 = ges_layer_add_asset (layer2, asset, 50, 0, 20, GES_TRACK_TYPE_UNKNOWN);
CHECK_CLIP (c3, 30, 0, 20, 0);
CHECK_CLIP (c4, 40, 0, 20, 1);
CHECK_CLIP (c5, 50, 0, 20, 2);
check_layer (c, 0);
check_layer (c1, 1);
check_layer (c2, 1);
fail_unless (ges_container_edit (GES_CONTAINER (c), NULL, -1,
GES_EDIT_MODE_RIPPLE, GES_EDGE_NONE, 10) == TRUE);
CHECK_CLIP (c, 10, 0, 10, 0);
CHECK_CLIP (c1, 20, 0, 10, 1);
CHECK_CLIP (c2, 30, 0, 10, 1);
CHECK_CLIP (c3, 40, 0, 20, 0);
CHECK_CLIP (c4, 50, 0, 20, 1);
CHECK_CLIP (c5, 60, 0, 20, 2);
fail_unless (ges_container_edit (GES_CONTAINER (c), NULL, 1,
GES_EDIT_MODE_RIPPLE, GES_EDGE_NONE, 10) == TRUE);
CHECK_CLIP (c, 10, 0, 10, 1);
CHECK_CLIP (c1, 20, 0, 10, 2);
CHECK_CLIP (c2, 30, 0, 10, 2);
CHECK_CLIP (c3, 40, 0, 20, 1);
CHECK_CLIP (c4, 50, 0, 20, 2);
CHECK_CLIP (c5, 60, 0, 20, 3);
fail_if (ges_container_edit (GES_CONTAINER (c1), NULL, 2,
GES_EDIT_MODE_RIPPLE, GES_EDGE_END, 40) == TRUE);
CHECK_CLIP (c, 10, 0, 10, 1);
CHECK_CLIP (c1, 20, 0, 10, 2);
CHECK_CLIP (c2, 30, 0, 10, 2);
CHECK_CLIP (c3, 40, 0, 20, 1);
CHECK_CLIP (c4, 50, 0, 20, 2);
CHECK_CLIP (c5, 60, 0, 20, 3);
fail_unless (ges_container_edit (GES_CONTAINER (c), NULL, 0,
GES_EDIT_MODE_RIPPLE, GES_EDGE_NONE, 0) == TRUE);
CHECK_CLIP (c, 0, 0, 10, 0);
CHECK_CLIP (c1, 10, 0, 10, 1);
CHECK_CLIP (c2, 20, 0, 10, 1);
CHECK_CLIP (c3, 30, 0, 20, 0);
CHECK_CLIP (c4, 40, 0, 20, 1);
CHECK_CLIP (c5, 50, 0, 20, 2);
CHECK_OBJECT_PROPS (group, 0, 0, 30);
fail_unless (ges_container_edit (GES_CONTAINER (c), NULL, 0,
GES_EDIT_MODE_TRIM, GES_EDGE_START, 5) == TRUE);
CHECK_CLIP (c, 5, 5, 5, 0);
CHECK_CLIP (c1, 10, 0, 10, 1);
CHECK_CLIP (c2, 20, 0, 10, 1);
CHECK_CLIP (c3, 30, 0, 20, 0);
CHECK_CLIP (c4, 40, 0, 20, 1);
CHECK_CLIP (c5, 50, 0, 20, 2);
CHECK_OBJECT_PROPS (group, 5, 0, 25);
gst_object_unref (timeline);
gst_object_unref (asset);
ges_deinit ();
}
GST_END_TEST;
GST_START_TEST (test_snapping_groups)
{
GESAsset *asset;
GESTimeline *timeline;
GESGroup *group;
GESLayer *layer, *layer1, *layer2, *layer3;
GESClip *c, *c1, *c2, *c3, *c4, *c5;
GList *clips = NULL;
ges_init ();
timeline = ges_timeline_new_audio_video ();
g_object_set (timeline, "snapping-distance", (guint64) 3, NULL);
/* Our timeline
*
* --0------------10-Group-----20---------25-----30----------------------70
* | +-----------+ | +-----------50 |
* L | | C | | | C3 | |
* | +-----------+ | +-----------+ |
* --|------------------------------------|------------40----------------|
* | +------------+ +--------+ +--------60 |
* L1 | | C1 | | C2 | | C4 | |
* | +------------+ +--------+ +--------+ |
* --|------------------------------------+------------------------------|
* | +--------+|
* L2 | | c5 ||
* | +--------+|
* --+-------------------------------------------------------------------+
*
* L3
*
* -----------------------------------------------------------------------
*/
layer = ges_timeline_append_layer (timeline);
layer1 = ges_timeline_append_layer (timeline);
layer2 = ges_timeline_append_layer (timeline);
layer3 = ges_timeline_append_layer (timeline);
assert_equals_int (ges_layer_get_priority (layer3), 3);
asset = ges_asset_request (GES_TYPE_TEST_CLIP, NULL, NULL);
c = ges_layer_add_asset (layer, asset, 0, 0, 10, GES_TRACK_TYPE_UNKNOWN);
c1 = ges_layer_add_asset (layer1, asset, 10, 0, 10, GES_TRACK_TYPE_UNKNOWN);
c2 = ges_layer_add_asset (layer1, asset, 20, 0, 5, GES_TRACK_TYPE_UNKNOWN);
clips = g_list_prepend (clips, c);
clips = g_list_prepend (clips, c1);
clips = g_list_prepend (clips, c2);
group = GES_GROUP (ges_container_group (clips));
fail_unless (GES_TIMELINE_ELEMENT_TIMELINE (group) == timeline);
g_list_free (clips);
fail_unless (GES_IS_GROUP (group));
CHECK_OBJECT_PROPS (c, 0, 0, 10);
CHECK_OBJECT_PROPS (c1, 10, 0, 10);
CHECK_OBJECT_PROPS (c2, 20, 0, 5);
CHECK_OBJECT_PROPS (group, 0, 0, 25);
c3 = ges_layer_add_asset (layer, asset, 30, 0, 20, GES_TRACK_TYPE_UNKNOWN);
c4 = ges_layer_add_asset (layer1, asset, 40, 0, 20, GES_TRACK_TYPE_UNKNOWN);
c5 = ges_layer_add_asset (layer2, asset, 50, 0, 20, GES_TRACK_TYPE_UNKNOWN);
CHECK_OBJECT_PROPS (c3, 30, 0, 20);
CHECK_OBJECT_PROPS (c4, 40, 0, 20);
CHECK_OBJECT_PROPS (c5, 50, 0, 20);
check_layer (c, 0);
check_layer (c1, 1);
check_layer (c2, 1);
check_layer (c3, 0);
check_layer (c4, 1);
check_layer (c5, 2);
/* c2 should snap with C3 and make the group moving to 5 */
fail_unless (ges_container_edit (GES_CONTAINER (c), NULL, -1,
GES_EDIT_MODE_NORMAL, GES_EDGE_NONE, 3) == TRUE);
DEEP_CHECK (c, 5, 0, 10);
DEEP_CHECK (c1, 15, 0, 10);
DEEP_CHECK (c2, 25, 0, 5);
DEEP_CHECK (c2, 25, 0, 5);
DEEP_CHECK (c4, 40, 0, 20);
DEEP_CHECK (c5, 50, 0, 20);
CHECK_OBJECT_PROPS (group, 5, 0, 25);
check_layer (c, 0);
check_layer (c1, 1);
check_layer (c2, 1);
check_layer (c3, 0);
check_layer (c4, 1);
check_layer (c5, 2);
gst_object_unref (timeline);
gst_object_unref (asset);
ges_deinit ();
}
GST_END_TEST;
static Suite *
ges_suite (void)
{
Suite *s = suite_create ("ges-timeline-edition");
TCase *tc_chain = tcase_create ("timeline-edition");
suite_add_tcase (s, tc_chain);
tcase_add_test (tc_chain, test_basic_timeline_edition);
tcase_add_test (tc_chain, test_snapping);
tcase_add_test (tc_chain, test_timeline_edition_mode);
tcase_add_test (tc_chain, test_simple_triming);
tcase_add_test (tc_chain, test_groups);
tcase_add_test (tc_chain, test_snapping_groups);
return s;
}
GST_CHECK_MAIN (ges);
Reference in a new issue View git blame Copy permalink