/* GStreamer Editing Services * Copyright (C) 2009 Edward Hervey * 2009 Nokia Corporation * 2012 Collabora Ltd. * Author: Sebastian Dröge * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Library General Public * License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Library General Public License for more details. * * You should have received a copy of the GNU Library General Public * License along with this library; if not, write to the * Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, * Boston, MA 02110-1301, USA. */ /** * SECTION:gesclip * @title: GESClip * @short_description: Base class for elements that occupy a single * #GESLayer and maintain equal timings of their children * * #GESClip-s are the core objects of a #GESLayer. Each clip may exist in * a single layer but may control several #GESTrackElement-s that span * several #GESTrack-s. A clip will ensure that all its children share the * same #GESTimelineElement:start and #GESTimelineElement:duration in * their tracks, which will match the #GESTimelineElement:start and * #GESTimelineElement:duration of the clip itself. Therefore, changing * the timing of the clip will change the timing of the children, and a * change in the timing of a child will change the timing of the clip and * subsequently all its siblings. As such, a clip can be treated as a * singular object in its layer. * * For most uses of a #GESTimeline, it is often sufficient to only * interact with #GESClip-s directly, which will take care of creating and * organising the elements of the timeline's tracks. * * ## Core Children * * In more detail, clips will usually have some *core* #GESTrackElement * children, which are created by the clip when it is added to a layer in * a timeline. The type and form of these core children will depend on the * clip's subclass. You can use ges_track_element_is_core() to determine * whether a track element is considered such a core track element. Note, * if a core track element is part of a clip, it will always be treated as * a core *child* of the clip. You can connect to the * #GESContainer::child-added signal to be notified of their creation. * * When a child is added to a clip, the timeline will select its tracks * using #GESTimeline::select-tracks-for-object. Note that it may be the * case that the child will still have no set #GESTrackElement:track * after this process. For example, if the timeline does not have a track * of the corresponding #GESTrack:track-type. A clip can safely contain * such children, which may have their track set later, although they will * play no functioning role in the timeline in the meantime. * * If a clip may create track elements with various * #GESTrackElement:track-type(s), such as a #GESUriClip, but you only * want it to create a subset of these types, you should set the * #GESClip:supported-formats of the clip to the subset of types. This * should be done *before* adding the clip to a layer. * * If a clip will produce several core elements of the same * #GESTrackElement:track-type, you should connect to the timeline's * #GESTimeline::select-tracks-for-object signal to coordinate which * tracks each element should land in. Note, no two core children within a * clip can share the same #GESTrack, so you should not select the same * track for two separate core children. Provided you stick to this rule, * it is still safe to select several tracks for the same core child, the * core child will be copied into the additional tracks. You can manually * add the child to more tracks later using ges_clip_add_child_to_track(). * If you do not wish to use a core child, you can always select no track. * * The #GESTimelineElement:in-point of the clip will control the * #GESTimelineElement:in-point of its core children to be the same * value if their #GESTrackElement:has-internal-source is set to %TRUE. * * The #GESTimelineElement:max-duration of the clip is the minimum * #GESTimelineElement:max-duration of its core children. If you set its * value to anything other than its current value, this will also set the * #GESTimelineElement:max-duration of all its core children to the same * value if their #GESTrackElement:has-internal-source is set to %TRUE. * As a special case, whilst a clip does not yet have any core children, * its #GESTimelineElement:max-duration may be set to indicate what its * value will be once they are created. * * ## Effects * * Some subclasses (#GESSourceClip and #GESBaseEffectClip) may also allow * their objects to have additional non-core #GESBaseEffect-s elements as * children. These are additional effects that are applied to the output * data of the core elements. They can be added to the clip using * ges_clip_add_top_effect(), which will take care of adding the effect to * the timeline's tracks. The new effect will be placed between the clip's * core track elements and its other effects. As such, the newly added * effect will be applied to any source data **before** the other existing * effects. You can change the ordering of effects using * ges_clip_set_top_effect_index(). * * Tracks are selected for top effects in the same way as core children. * If you add a top effect to a clip before it is part of a timeline, and * later add the clip to a timeline, the track selection for the top * effects will occur just after the track selection for the core * children. If you add a top effect to a clip that is already part of a * timeline, the track selection will occur immediately. Since a top * effect must be applied on top of a core child, if you use * #GESTimeline::select-tracks-for-object, you should ensure that the * added effects are destined for a #GESTrack that already contains a core * child. * * In addition, if the core child in the track is not * #GESTrackElement:active, then neither can any of its effects be * #GESTrackElement:active. Therefore, if a core child is made in-active, * all of the additional effects in the same track will also become * in-active. Similarly, if an effect is set to be active, then the core * child will also become active, but other effects will be left alone. * Finally, if an active effect is added to the track of an in-active core * child, it will become in-active as well. Note, in contrast, setting a * core child to be active, or an effect to be in-active will *not* change * the other children in the same track. * * ### Time Effects * * Some effects also change the timing of their data (see #GESBaseEffect * for what counts as a time effect). Note that a #GESBaseEffectClip will * refuse time effects, but a #GESSource will allow them. * * When added to a clip, time effects may adjust the timing of other * children in the same track. Similarly, when changing the order of * effects, making them (in)-active, setting their time property values * or removing time effects. These can cause the #GESClip:duration-limit * to change in value. However, if such an operation would ever cause the * #GESTimelineElement:duration to shrink such that a clip's #GESSource is * totally overlapped in the timeline, the operation would be prevented. * Note that the same can happen when adding non-time effects with a * finite #GESTimelineElement:max-duration. * * Therefore, when working with time effects, you should -- more so than * usual -- not assume that setting the properties of the clip's children * will succeed. In particular, you should use * ges_timeline_element_set_child_property_full() when setting the time * properties. * * If you wish to preserve the *internal* duration of a source in a clip * during these time effect operations, you can do something like the * following. * * ```c * void * do_time_effect_change (GESClip * clip) * { * GList *tmp, *children; * GESTrackElement *source; * GstClockTime source_outpoint; * GstClockTime new_end; * GError *error = NULL; * * // choose some active source in a track to preserve the internal * // duration of * source = ges_clip_get_track_element (clip, NULL, GES_TYPE_SOURCE); * * // note its current internal end time * source_outpoint = ges_clip_get_internal_time_from_timeline_time ( * clip, source, GES_TIMELINE_ELEMENT_END (clip), NULL); * * // handle invalid out-point * * // stop the children's control sources from clamping when their * // out-point changes with a change in the time effects * children = ges_container_get_children (GES_CONTAINER (clip), FALSE); * * for (tmp = children; tmp; tmp = tmp->next) * ges_track_element_set_auto_clamp_control_source (tmp->data, FALSE); * * // add time effect, or set their children properties, or move them around * ... * // user can make sure that if a time effect changes one source, we should * // also change the time effect for another source. E.g. if * // "GstVideorate::rate" is set to 2.0, we also set "GstPitch::rate" to * // 2.0 * * // Note the duration of the clip may have already changed if the * // duration-limit of the clip dropped below its current value * * new_end = ges_clip_get_timeline_time_from_internal_time ( * clip, source, source_outpoint, &error); * // handle error * * if (!ges_timeline_elemnet_edit_full (GES_TIMELINE_ELEMENT (clip), * -1, GES_EDIT_MODE_TRIM, GES_EDGE_END, new_end, &error)) * // handle error * * for (tmp = children; tmp; tmp = tmp->next) * ges_track_element_set_auto_clamp_control_source (tmp->data, TRUE); * * g_list_free_full (children, gst_object_unref); * gst_object_unref (source); * } * ``` */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "ges-clip.h" #include "ges.h" #include "ges-internal.h" #include static GList *ges_clip_create_track_elements_func (GESClip * clip, GESTrackType type); static void _compute_height (GESContainer * container); static GstClockTime _convert_core_time (GESClip * clip, GstClockTime time, gboolean to_timeline, gboolean * no_core, GError ** error); struct _GESClipPrivate { /*< public > */ GESLayer *layer; /*< private > */ guint nb_effects; GList *copied_track_elements; GESLayer *copied_layer; GESTimeline *copied_timeline; gboolean prevent_resort; gboolean updating_max_duration; gboolean setting_max_duration; gboolean setting_inpoint; gboolean setting_priority; gboolean setting_active; gboolean allow_any_track; /* The formats supported by this Clip */ GESTrackType supportedformats; GstClockTime duration_limit; gboolean prevent_duration_limit_update; gboolean prevent_children_outpoint_update; gboolean allow_any_remove; gboolean use_effect_priority; guint32 effect_priority; GError *add_error; GError *remove_error; }; enum { PROP_0, PROP_LAYER, PROP_SUPPORTED_FORMATS, PROP_DURATION_LIMIT, PROP_LAST }; static GParamSpec *properties[PROP_LAST]; static void ges_extractable_interface_init (GESExtractableInterface * iface) { iface->asset_type = GES_TYPE_CLIP_ASSET; } G_DEFINE_ABSTRACT_TYPE_WITH_CODE (GESClip, ges_clip, GES_TYPE_CONTAINER, G_ADD_PRIVATE (GESClip) G_IMPLEMENT_INTERFACE (GES_TYPE_EXTRACTABLE, ges_extractable_interface_init)); /**************************************************** * * * Listen to our children * * and restrict them * * * ****************************************************/ #define _IS_CORE_CHILD(child) \ ges_track_element_is_core (GES_TRACK_ELEMENT (child)) #define _IS_TOP_EFFECT(child) \ (!_IS_CORE_CHILD (child) && GES_IS_BASE_EFFECT (child)) #define _IS_CORE_INTERNAL_SOURCE_CHILD(child) \ (_IS_CORE_CHILD (child) \ && ges_track_element_has_internal_source (GES_TRACK_ELEMENT (child))) #define _MIN_CLOCK_TIME(a, b) \ (GST_CLOCK_TIME_IS_VALID (a) ? \ (GST_CLOCK_TIME_IS_VALID (b) ? MIN (a, b) : a) : b) \ /**************************************************** * duration-limit * ****************************************************/ typedef struct _DurationLimitData { GESTrackElement *child; GESTrack *track; guint32 priority; GstClockTime max_duration; GstClockTime inpoint; gboolean active; GHashTable *time_property_values; } DurationLimitData; static DurationLimitData * _duration_limit_data_new (GESTrackElement * child) { GESTrack *track = ges_track_element_get_track (child); DurationLimitData *data = g_new0 (DurationLimitData, 1); data->child = gst_object_ref (child); data->track = track ? gst_object_ref (track) : NULL; data->inpoint = _INPOINT (child); data->max_duration = _MAXDURATION (child); data->priority = _PRIORITY (child); data->active = ges_track_element_is_active (child); if (GES_IS_TIME_EFFECT (child)) data->time_property_values = ges_base_effect_get_time_property_values (GES_BASE_EFFECT (child)); return data; } static void _duration_limit_data_free (gpointer data_p) { DurationLimitData *data = data_p; gst_clear_object (&data->track); gst_clear_object (&data->child); if (data->time_property_values) g_hash_table_unref (data->time_property_values); g_free (data); } static GList * _duration_limit_data_list (GESClip * clip) { GList *tmp, *list = NULL; for (tmp = GES_CONTAINER_CHILDREN (clip); tmp; tmp = tmp->next) list = g_list_prepend (list, _duration_limit_data_new (tmp->data)); return list; } /* transfer-full of data */ static GList * _duration_limit_data_list_with_data (GESClip * clip, DurationLimitData * data) { GList *tmp, *list = g_list_append (NULL, data); for (tmp = GES_CONTAINER_CHILDREN (clip); tmp; tmp = tmp->next) { GESTrackElement *child = tmp->data; if (data->child == child) continue; list = g_list_prepend (list, _duration_limit_data_new (child)); } return list; } static gint _cmp_duration_limit_data_by_track_then_priority (gconstpointer a_p, gconstpointer b_p) { const DurationLimitData *a = a_p, *b = b_p; if (a->track < b->track) return -1; else if (a->track > b->track) return 1; /* if higher priority (numerically lower) place later */ if (a->priority < b->priority) return 1; else if (a->priority > b->priority) return -1; return 0; } #define _INTERNAL_LIMIT(data) \ ((data->active && GST_CLOCK_TIME_IS_VALID (data->max_duration)) ? \ data->max_duration - data->inpoint : GST_CLOCK_TIME_NONE) static GstClockTime _calculate_track_duration_limit (GESClip * self, GList * start, GList * end) { GList *tmp; DurationLimitData *data = start->data; GstClockTime track_limit; /* convert source-duration to timeline-duration * E.g. consider the following stack * * *=============================* * | source | * | in-point = 5 | * | max-duration = 20 | * *=============================* * 5 10 15 20 (internal coordinates) * * duration-limit = 15 because max-duration - in-point = 15 * * 0 5 10 15 * *=============================* * | time-effect | | sink_to_source * | rate = 0.5 | v / 0.5 * *=============================* * 0 10 20 30 * * duration-limit = 30 because rate effect can make it last longer * * 13 23 33 (internal coordinates) * *===================* * |effect-with-source | * | in-point = 13 | * | max-duration = 33 | * *===================* * 13 23 33 (internal coordinates) * * duration-limit = 20 because effect-with-source cannot cover 30 * * 0 10 20 * *===================* * | time-effect | | sink_to_source * | rate = 2.0 | v / 2.0 * *===================* * 0 5 10 * * duration-limit = 10 because rate effect uses up twice as much * * -----------------------------------------------timeline */ while (!_IS_CORE_CHILD (data->child)) { GST_WARNING_OBJECT (self, "Child %" GES_FORMAT " has a lower " "priority than the core child in the same track. Ignoring.", GES_ARGS (data->child)); start = start->next; if (start == end) { GST_ERROR_OBJECT (self, "Track %" GST_PTR_FORMAT " is missing a " "core child", data->track); return GST_CLOCK_TIME_NONE; } data = start->data; } track_limit = _INTERNAL_LIMIT (data); for (tmp = start->next; tmp != end; tmp = tmp->next) { data = tmp->data; if (GES_IS_TIME_EFFECT (data->child)) { GESBaseEffect *effect = GES_BASE_EFFECT (data->child); if (data->inpoint) GST_ERROR_OBJECT (self, "Did not expect an in-point to be set " "for the time effect %" GES_FORMAT, GES_ARGS (effect)); if (GST_CLOCK_TIME_IS_VALID (data->max_duration)) GST_ERROR_OBJECT (self, "Did not expect a max-duration to be set " "for the time effect %" GES_FORMAT, GES_ARGS (effect)); if (data->active) { /* for the time effect, the minimum time it will receive is 0 * (it should map 0 -> 0), and the maximum time will be track_limit */ track_limit = ges_base_effect_translate_sink_to_source_time (effect, track_limit, data->time_property_values); } } else { GstClockTime el_limit = _INTERNAL_LIMIT (data); track_limit = _MIN_CLOCK_TIME (track_limit, el_limit); } } GST_LOG_OBJECT (self, "Track duration-limit for track %" GST_PTR_FORMAT " is %" GST_TIME_FORMAT, data->track, GST_TIME_ARGS (track_limit)); return track_limit; } /* transfer-full of child_data */ static GstClockTime _calculate_duration_limit (GESClip * self, GList * child_data) { GstClockTime limit = GST_CLOCK_TIME_NONE; GList *start, *end; child_data = g_list_sort (child_data, _cmp_duration_limit_data_by_track_then_priority); start = child_data; while (start) { /* we have the first element in the track, of the lowest priority, and * work our way up from here */ GESTrack *track = ((DurationLimitData *) (start->data))->track; end = start; do { end = end->next; } while (end && ((DurationLimitData *) (end->data))->track == track); if (track) { GstClockTime track_limit = _calculate_track_duration_limit (self, start, end); limit = _MIN_CLOCK_TIME (limit, track_limit); } start = end; } GST_LOG_OBJECT (self, "calculated duration-limit for the clip is %" GST_TIME_FORMAT, GST_TIME_ARGS (limit)); g_list_free_full (child_data, _duration_limit_data_free); return limit; } static void _update_children_outpoints (GESClip * self) { GList *tmp; if (self->priv->prevent_children_outpoint_update) return; for (tmp = GES_CONTAINER_CHILDREN (self); tmp; tmp = tmp->next) { ges_track_element_update_outpoint (tmp->data); } } static void _update_duration_limit (GESClip * self) { GstClockTime duration_limit; if (self->priv->prevent_duration_limit_update) return; duration_limit = _calculate_duration_limit (self, _duration_limit_data_list (self)); if (duration_limit != self->priv->duration_limit) { GESTimelineElement *element = GES_TIMELINE_ELEMENT (self); self->priv->duration_limit = duration_limit; GST_INFO_OBJECT (self, "duration-limit for the clip is %" GST_TIME_FORMAT, GST_TIME_ARGS (duration_limit)); if (GES_CLOCK_TIME_IS_LESS (duration_limit, element->duration) && !GES_TIMELINE_ELEMENT_BEING_EDITED (self)) { gboolean res; GST_INFO_OBJECT (self, "Automatically reducing duration to %" GST_TIME_FORMAT " to match the new duration-limit because " "the current duration %" GST_TIME_FORMAT " exceeds it", GST_TIME_ARGS (duration_limit), GST_TIME_ARGS (element->duration)); /* trim end with no snapping */ if (element->timeline) res = timeline_tree_trim (timeline_get_tree (element->timeline), element, 0, GST_CLOCK_DIFF (duration_limit, element->duration), GES_EDGE_END, 0, NULL); else res = ges_timeline_element_set_duration (element, duration_limit); if (!res) GST_ERROR_OBJECT (self, "Could not reduce the duration of the " "clip to below its duration-limit of %" GST_TIME_FORMAT, GST_TIME_ARGS (duration_limit)); } /* notify after the auto-change in duration to allow the user to set * the duration in response to the change in their callbacks */ g_object_notify_by_pspec (G_OBJECT (self), properties[PROP_DURATION_LIMIT]); } } /* transfer full of child_data */ static gboolean _can_update_duration_limit (GESClip * self, GList * child_data, GError ** error) { GESTimeline *timeline = GES_TIMELINE_ELEMENT_TIMELINE (self); GstClockTime duration = _calculate_duration_limit (self, child_data); GESTimelineElement *element = GES_TIMELINE_ELEMENT (self); if (GES_CLOCK_TIME_IS_LESS (duration, element->duration)) { /* NOTE: timeline would normally not be NULL at this point */ if (timeline && !timeline_tree_can_move_element (timeline_get_tree (timeline), element, ges_timeline_element_get_layer_priority (element), element->start, duration, error)) { return FALSE; } } return TRUE; } /**************************************************** * priority * ****************************************************/ /* @min_priority: The absolute minimum priority a child of @container should have * @max_priority: The absolute maximum priority a child of @container should have */ static void _get_priority_range_full (GESContainer * container, guint32 * min_priority, guint32 * max_priority, guint32 priority_base) { GESLayer *layer = GES_CLIP (container)->priv->layer; if (layer) { *min_priority = priority_base + layer->min_nle_priority; *max_priority = layer->max_nle_priority; } else { *min_priority = priority_base + MIN_NLE_PRIO; *max_priority = G_MAXUINT32; } } static void _get_priority_range (GESContainer * container, guint32 * min_priority, guint32 * max_priority) { _get_priority_range_full (container, min_priority, max_priority, _PRIORITY (container)); } gboolean ges_clip_can_set_priority_of_child (GESClip * clip, GESTrackElement * child, guint32 priority, GError ** error) { GList *child_data; DurationLimitData *data; if (clip->priv->setting_priority) return TRUE; data = _duration_limit_data_new (child); data->priority = priority; child_data = _duration_limit_data_list_with_data (clip, data); if (!_can_update_duration_limit (clip, child_data, error)) { GST_INFO_OBJECT (clip, "Cannot move the child %" GES_FORMAT " from " "priority %" G_GUINT32_FORMAT " to %" G_GUINT32_FORMAT " because " "the duration-limit cannot be adjusted", GES_ARGS (child), _PRIORITY (child), priority); return FALSE; } return TRUE; } static void _child_priority_changed (GESContainer * container, GESTimelineElement * child) { /* we do not change the rest of the clip in response to a change in * the child priority */ GST_DEBUG_OBJECT (container, "TimelineElement %" GES_FORMAT " priority changed to %u", GES_ARGS (child), _PRIORITY (child)); if (!(GES_CLIP (container))->priv->prevent_resort) { _ges_container_sort_children (container); _compute_height (container); } } /**************************************************** * in-point * ****************************************************/ GstClockTime ges_clip_duration_limit_with_new_children_inpoints (GESClip * clip, GHashTable * child_inpoints) { GHashTableIter iter; gpointer key, value; GList *child_data = NULL; g_hash_table_iter_init (&iter, child_inpoints); while (g_hash_table_iter_next (&iter, &key, &value)) { GESTrackElement *child = key; GstClockTime *inpoint_p = value; DurationLimitData *data = _duration_limit_data_new (child); data->inpoint = *inpoint_p; child_data = g_list_prepend (child_data, data); } return _calculate_duration_limit (clip, child_data); } static gboolean _can_set_inpoint_of_core_children (GESClip * clip, GstClockTime inpoint, GError ** error) { GList *tmp; GList *child_data = NULL; if (GES_TIMELINE_ELEMENT_BEING_EDITED (clip)) return TRUE; /* setting the in-point of a core child will shift the in-point of all * core children with an internal source */ for (tmp = GES_CONTAINER_CHILDREN (clip); tmp; tmp = tmp->next) { GESTimelineElement *child = tmp->data; DurationLimitData *data = _duration_limit_data_new (GES_TRACK_ELEMENT (child)); if (_IS_CORE_INTERNAL_SOURCE_CHILD (child)) { if (GES_CLOCK_TIME_IS_LESS (child->maxduration, inpoint)) { GST_INFO_OBJECT (clip, "Cannot set the in-point from %" GST_TIME_FORMAT " to %" GST_TIME_FORMAT " because it would " "cause the in-point of its core child %" GES_FORMAT " to exceed its max-duration", GST_TIME_ARGS (_INPOINT (clip)), GST_TIME_ARGS (inpoint), GES_ARGS (child)); g_set_error (error, GES_ERROR, GES_ERROR_NOT_ENOUGH_INTERNAL_CONTENT, "Cannot set the in-point of \"%s\" to %" GST_TIME_FORMAT " because it would exceed the max-duration of %" GST_TIME_FORMAT " for the child \"%s\"", GES_TIMELINE_ELEMENT_NAME (clip), GST_TIME_ARGS (inpoint), GST_TIME_ARGS (child->maxduration), child->name); _duration_limit_data_free (data); g_list_free_full (child_data, _duration_limit_data_free); return FALSE; } data->inpoint = inpoint; } child_data = g_list_prepend (child_data, data); } if (!_can_update_duration_limit (clip, child_data, error)) { GST_INFO_OBJECT (clip, "Cannot set the in-point from %" GST_TIME_FORMAT " to %" GST_TIME_FORMAT " because the duration-limit cannot be " "adjusted", GST_TIME_ARGS (_INPOINT (clip)), GST_TIME_ARGS (inpoint)); return FALSE; } return TRUE; } /* Whether @clip can have its in-point set to @inpoint because none of * its children have a max-duration below it */ gboolean ges_clip_can_set_inpoint_of_child (GESClip * clip, GESTrackElement * child, GstClockTime inpoint, GError ** error) { /* don't bother checking if we are setting the value */ if (clip->priv->setting_inpoint) return TRUE; if (GES_TIMELINE_ELEMENT_BEING_EDITED (child)) return TRUE; if (!_IS_CORE_CHILD (child)) { /* no other sibling will move */ GList *child_data; DurationLimitData *data = _duration_limit_data_new (child); data->inpoint = inpoint; child_data = _duration_limit_data_list_with_data (clip, data); if (!_can_update_duration_limit (clip, child_data, error)) { GST_INFO_OBJECT (clip, "Cannot set the in-point of non-core child %" GES_FORMAT " from %" GST_TIME_FORMAT " to %" GST_TIME_FORMAT " because the duration-limit cannot be adjusted", GES_ARGS (child), GST_TIME_ARGS (_INPOINT (child)), GST_TIME_ARGS (inpoint)); return FALSE; } return TRUE; } /* setting the in-point of a core child will shift the in-point of all * core children with an internal source */ return _can_set_inpoint_of_core_children (clip, inpoint, error); } /* returns TRUE if duration-limit needs to be updated */ static gboolean _child_inpoint_changed (GESClip * self, GESTimelineElement * child) { if (self->priv->setting_inpoint) return FALSE; /* if we have a non-core child, then we do not need the in-point of the * clip to change. Similarly, if the track element is core but has no * internal content, then this means its in-point has been set (back) to * 0, which means we do not need to update the in-point of the clip. */ if (!_IS_CORE_INTERNAL_SOURCE_CHILD (child)) return TRUE; /* if setting the in-point of the clip, this will handle the change in * the duration-limit */ /* If the child->inpoint is the same as our own, set_inpoint will do * nothing. For example, when we set them in add_child (the notifies for * this are released after child_added is called because * ges_container_add freezes them) */ _set_inpoint0 (GES_TIMELINE_ELEMENT (self), child->inpoint); return FALSE; } /**************************************************** * max-duration * ****************************************************/ static void _update_max_duration (GESContainer * container) { GList *tmp; GstClockTime min = GST_CLOCK_TIME_NONE; GESClipPrivate *priv = GES_CLIP (container)->priv; if (priv->setting_max_duration) return; for (tmp = container->children; tmp; tmp = tmp->next) { GESTimelineElement *child = tmp->data; if (_IS_CORE_CHILD (child)) min = _MIN_CLOCK_TIME (min, child->maxduration); } priv->updating_max_duration = TRUE; ges_timeline_element_set_max_duration (GES_TIMELINE_ELEMENT (container), min); priv->updating_max_duration = FALSE; } gboolean ges_clip_can_set_max_duration_of_child (GESClip * clip, GESTrackElement * child, GstClockTime max_duration, GError ** error) { GList *child_data; DurationLimitData *data; if (clip->priv->setting_max_duration) return TRUE; data = _duration_limit_data_new (child); data->max_duration = max_duration; child_data = _duration_limit_data_list_with_data (clip, data); if (!_can_update_duration_limit (clip, child_data, error)) { GST_INFO_OBJECT (clip, "Cannot set the max-duration of child %" GES_FORMAT " from %" GST_TIME_FORMAT " to %" GST_TIME_FORMAT " because the duration-limit cannot be adjusted", GES_ARGS (child), GST_TIME_ARGS (_MAXDURATION (child)), GST_TIME_ARGS (max_duration)); return FALSE; } return TRUE; } gboolean ges_clip_can_set_max_duration_of_all_core (GESClip * clip, GstClockTime max_duration, GError ** error) { GList *tmp; GList *child_data = NULL; for (tmp = GES_CONTAINER_CHILDREN (clip); tmp; tmp = tmp->next) { GESTimelineElement *child = tmp->data; DurationLimitData *data = _duration_limit_data_new (GES_TRACK_ELEMENT (child)); if (_IS_CORE_CHILD (child)) { /* don't check that it has an internal-source, since we are assuming * we will have one if the max-duration is valid */ if (GES_CLOCK_TIME_IS_LESS (max_duration, child->inpoint)) { GST_INFO_OBJECT (clip, "Cannot set the max-duration from %" GST_TIME_FORMAT " to %" GST_TIME_FORMAT " because it would " "cause the in-point of its core child %" GES_FORMAT " to exceed its max-duration", GST_TIME_ARGS (child->maxduration), GST_TIME_ARGS (max_duration), GES_ARGS (child)); g_set_error (error, GES_ERROR, GES_ERROR_NOT_ENOUGH_INTERNAL_CONTENT, "Cannot set the max-duration of the child \"%s\" under the " "clip \"%s\" to %" GST_TIME_FORMAT " because it would be " "below the in-point of %" GST_TIME_FORMAT " of the child", child->name, GES_TIMELINE_ELEMENT_NAME (clip), GST_TIME_ARGS (max_duration), GST_TIME_ARGS (child->inpoint)); _duration_limit_data_free (data); g_list_free_full (child_data, _duration_limit_data_free); return FALSE; } data->max_duration = max_duration; } child_data = g_list_prepend (child_data, data); } if (!_can_update_duration_limit (clip, child_data, error)) { GST_INFO_OBJECT (clip, "Cannot set the max-duration of the core " "children to %" GST_TIME_FORMAT " because the duration-limit " "cannot be adjusted", GST_TIME_ARGS (max_duration)); return FALSE; } return TRUE; } static void _child_max_duration_changed (GESContainer * container, GESTimelineElement * child) { /* ignore non-core */ if (!_IS_CORE_CHILD (child)) return; _update_max_duration (container); } /**************************************************** * has-internal-source * ****************************************************/ static void _child_has_internal_source_changed (GESClip * self, GESTimelineElement * child) { /* ignore non-core */ /* if the track element is now registered to have no internal content, * we don't have to do anything * Note that the change in max-duration and in-point will already trigger * a change in the duration-limit, which can only increase since the * max-duration is now GST_CLOCK_TIME_NONE */ if (!_IS_CORE_INTERNAL_SOURCE_CHILD (child)) return; /* otherwise, we need to make its in-point match ours * Note that the duration-limit will be GST_CLOCK_TIME_NONE, so this * should not change the duration-limit */ _set_inpoint0 (child, _INPOINT (self)); } /**************************************************** * active * ****************************************************/ gboolean ges_clip_can_set_active_of_child (GESClip * clip, GESTrackElement * child, gboolean active, GError ** error) { GESTrack *track = ges_track_element_get_track (child); gboolean is_core = _IS_CORE_CHILD (child); GList *child_data = NULL; DurationLimitData *data; if (clip->priv->setting_active) return TRUE; /* We want to ensure that each active non-core element has a * corresponding active core element in the same track */ if (!track || is_core == active) { /* only the one child will change */ data = _duration_limit_data_new (child); data->active = active; child_data = _duration_limit_data_list_with_data (clip, data); } else { GList *tmp; /* If we are core, make all the non-core elements in-active * If we are non-core, make the core element active */ for (tmp = GES_CONTAINER_CHILDREN (clip); tmp; tmp = tmp->next) { GESTrackElement *sibling = tmp->data; data = _duration_limit_data_new (sibling); if (sibling == child) data->active = active; if (ges_track_element_get_track (sibling) == track && _IS_CORE_CHILD (sibling) != is_core && ges_track_element_is_active (sibling) != active) data->active = active; child_data = g_list_prepend (child_data, data); } } if (!_can_update_duration_limit (clip, child_data, error)) { GST_INFO_OBJECT (clip, "Cannot set the active of child %" GES_FORMAT " from %i to %i because the duration-limit cannot be adjusted", GES_ARGS (child), ges_track_element_is_active (child), active); return FALSE; } return TRUE; } static void _child_active_changed (GESClip * self, GESTrackElement * child) { GList *tmp; GESTrack *track = ges_track_element_get_track (child); gboolean active = ges_track_element_is_active (child); gboolean is_core = _IS_CORE_CHILD (child); gboolean prev_prevent = self->priv->prevent_duration_limit_update; gboolean prev_prevent_outpoint = self->priv->prevent_children_outpoint_update; /* We want to ensure that each active non-core element has a * corresponding active core element in the same track */ if (self->priv->setting_active || !track || is_core == active) return; self->priv->setting_active = TRUE; self->priv->prevent_duration_limit_update = TRUE; self->priv->prevent_children_outpoint_update = TRUE; /* If we are core, make all the non-core elements in-active * If we are non-core, make the core element active (should only be one) */ for (tmp = GES_CONTAINER_CHILDREN (self); tmp; tmp = tmp->next) { GESTrackElement *sibling = tmp->data; if (ges_track_element_get_track (sibling) == track && _IS_CORE_CHILD (sibling) != is_core && ges_track_element_is_active (sibling) != active) { GST_INFO_OBJECT (self, "Setting active to %i for child %" GES_FORMAT " since the sibling %" GES_FORMAT " in the same track %" GST_PTR_FORMAT " has been set to %i", active, GES_ARGS (sibling), GES_ARGS (child), track, active); if (!ges_track_element_set_active (sibling, active)) GST_ERROR_OBJECT (self, "Failed to set active for child %" GES_FORMAT, GES_ARGS (sibling)); } } self->priv->setting_active = FALSE; self->priv->prevent_duration_limit_update = prev_prevent; self->priv->prevent_children_outpoint_update = prev_prevent_outpoint; } /**************************************************** * track * ****************************************************/ static GESTrackElement * _find_core_in_track (GESClip * clip, GESTrack * track) { GList *tmp; for (tmp = GES_CONTAINER_CHILDREN (clip); tmp; tmp = tmp->next) { GESTrackElement *child = tmp->data; if (_IS_CORE_CHILD (child) && ges_track_element_get_track (child) == track) return child; } return NULL; } static gboolean _track_contains_non_core (GESClip * clip, GESTrack * track) { GList *tmp; for (tmp = GES_CONTAINER_CHILDREN (clip); tmp; tmp = tmp->next) { GESTrackElement *child = tmp->data; if (!_IS_CORE_CHILD (child) && ges_track_element_get_track (child) == track) return TRUE; } return FALSE; } gboolean ges_clip_can_set_track_of_child (GESClip * clip, GESTrackElement * child, GESTrack * track, GError ** error) { GList *child_data; DurationLimitData *data; GESTrack *current_track = ges_track_element_get_track (child); GESTrackElement *core = NULL; if (clip->priv->allow_any_track) return TRUE; if (current_track == track) return TRUE; /* NOTE: we consider the following error cases programming errors by * the user */ if (current_track) { /* can not remove a core element from a track if a non-core one sits * above it */ if (_IS_CORE_CHILD (child) && _track_contains_non_core (clip, current_track)) { GST_WARNING_OBJECT (clip, "Cannot move the core child %" GES_FORMAT " to the track %" GST_PTR_FORMAT " because it has non-core " "siblings above it in its current track %" GST_PTR_FORMAT, GES_ARGS (child), track, current_track); return FALSE; } /* otherwise can remove */ } if (track) { GESTimeline *clip_timeline = GES_TIMELINE_ELEMENT_TIMELINE (clip); const GESTimeline *track_timeline = ges_track_get_timeline (track); if (track_timeline == NULL) { GST_WARNING_OBJECT (clip, "Cannot move the child %" GES_FORMAT " to the track %" GST_PTR_FORMAT " because it is not part " "of a timeline", GES_ARGS (child), track); return FALSE; } if (track_timeline != clip_timeline) { GST_WARNING_OBJECT (clip, "Cannot move the child %" GES_FORMAT " to the track %" GST_PTR_FORMAT " because its timeline %" GST_PTR_FORMAT " does not match the clip's timeline %" GST_PTR_FORMAT, GES_ARGS (child), track, track_timeline, clip_timeline); return FALSE; } core = _find_core_in_track (clip, track); /* one core child per track, and other children (effects) can only be * placed in a track that already has a core child */ if (_IS_CORE_CHILD (child)) { if (core) { GST_WARNING_OBJECT (clip, "Cannot move the core child %" GES_FORMAT " to the track %" GST_PTR_FORMAT " because it contains a " "core sibling %" GES_FORMAT, GES_ARGS (child), track, GES_ARGS (core)); return FALSE; } } else { if (!core) { GST_WARNING_OBJECT (clip, "Cannot move the non-core child %" GES_FORMAT " to the track %" GST_PTR_FORMAT " because it " " does not contain a core sibling", GES_ARGS (child), track); return FALSE; } } } data = _duration_limit_data_new (child); gst_clear_object (&data->track); data->track = track ? gst_object_ref (track) : NULL; if (core && !ges_track_element_is_active (core)) { /* if core is set, then we are adding a non-core to a track containing * a core track element. If this happens, but the core is in-active * then we will make the non-core element also inactive upon setting * its track */ data->active = FALSE; } child_data = _duration_limit_data_list_with_data (clip, data); if (!_can_update_duration_limit (clip, child_data, error)) { GST_INFO_OBJECT (clip, "Cannot move the child %" GES_FORMAT " from " "track %" GST_PTR_FORMAT " to track %" GST_PTR_FORMAT " because " "the duration-limit cannot be adjusted", GES_ARGS (child), current_track, track); return FALSE; } return TRUE; } static void _update_active_for_track (GESClip * self, GESTrackElement * child) { GESTrack *track = ges_track_element_get_track (child); GESTrackElement *core; gboolean active; gboolean prev_prevent = self->priv->prevent_duration_limit_update; gboolean prev_prevent_outpoint = self->priv->prevent_children_outpoint_update; if (self->priv->allow_any_track || _IS_CORE_CHILD (child) || !track) return; /* if we add a non-core to a track, but the core child is inactive, we * also need the non-core to be inactive */ core = _find_core_in_track (self, track); if (!core) { GST_ERROR_OBJECT (self, "The non-core child %" GES_FORMAT " is in " "the track %" GST_PTR_FORMAT " with no core sibling", GES_ARGS (child), track); active = FALSE; } else { active = ges_track_element_is_active (core); } if (!active && ges_track_element_is_active (child)) { GST_INFO_OBJECT (self, "De-activating non-core child %" GES_FORMAT " since the core child in the same track %" GST_PTR_FORMAT " is " "not active", GES_ARGS (child), track); self->priv->setting_active = TRUE; self->priv->prevent_duration_limit_update = TRUE; self->priv->prevent_children_outpoint_update = TRUE; if (!ges_track_element_set_active (child, FALSE)) GST_ERROR_OBJECT (self, "Failed to de-activate child %" GES_FORMAT, GES_ARGS (child)); self->priv->setting_active = FALSE; self->priv->prevent_duration_limit_update = prev_prevent; self->priv->prevent_children_outpoint_update = prev_prevent_outpoint; } } #define _IS_PROP(prop) (g_strcmp0 (name, prop) == 0) static void _child_property_changed_cb (GESTimelineElement * child, GParamSpec * pspec, GESClip * self) { gboolean update_limit = FALSE; gboolean update_outpoint = FALSE; const gchar *name = pspec->name; if (_IS_PROP ("track")) { update_limit = TRUE; update_outpoint = TRUE; _update_active_for_track (self, GES_TRACK_ELEMENT (child)); } else if (_IS_PROP ("active")) { update_limit = TRUE; update_outpoint = TRUE; _child_active_changed (self, GES_TRACK_ELEMENT (child)); } else if (_IS_PROP ("priority")) { update_limit = TRUE; update_outpoint = TRUE; _child_priority_changed (GES_CONTAINER (self), child); } else if (_IS_PROP ("in-point")) { /* update outpoint already handled by the track element */ update_limit = _child_inpoint_changed (self, child); } else if (_IS_PROP ("max-duration")) { update_limit = TRUE; _child_max_duration_changed (GES_CONTAINER (self), child); } else if (_IS_PROP ("has-internal-source")) { _child_has_internal_source_changed (self, child); } if (update_limit) _update_duration_limit (self); if (update_outpoint) _update_children_outpoints (self); } /**************************************************** * time properties * ****************************************************/ gboolean ges_clip_can_set_time_property_of_child (GESClip * clip, GESTrackElement * child, GObject * child_prop_object, GParamSpec * pspec, const GValue * value, GError ** error) { if (_IS_TOP_EFFECT (child)) { gchar *prop_name = ges_base_effect_get_time_property_name (GES_BASE_EFFECT (child), child_prop_object, pspec); if (prop_name) { GList *child_data; DurationLimitData *data = _duration_limit_data_new (child); GValue *copy = g_new0 (GValue, 1); g_value_init (copy, pspec->value_type); g_value_copy (value, copy); g_hash_table_insert (data->time_property_values, prop_name, copy); child_data = _duration_limit_data_list_with_data (clip, data); if (!_can_update_duration_limit (clip, child_data, error)) { gchar *val_str = gst_value_serialize (value); GST_INFO_OBJECT (clip, "Cannot set the child-property %s of " "child %" GES_FORMAT " to %s because the duration-limit " "cannot be adjusted", prop_name, GES_ARGS (child), val_str); g_free (val_str); return FALSE; } } } return TRUE; } static void _child_time_property_changed_cb (GESTimelineElement * child, GObject * prop_object, GParamSpec * pspec, GESClip * self) { gchar *time_prop = ges_base_effect_get_time_property_name (GES_BASE_EFFECT (child), prop_object, pspec); if (time_prop) { g_free (time_prop); _update_duration_limit (self); _update_children_outpoints (self); } } /***************************************************** * * * GESTimelineElement virtual methods implementation * * * *****************************************************/ static gboolean _set_start (GESTimelineElement * element, GstClockTime start) { GList *tmp, *children; GESContainer *container = GES_CONTAINER (element); GST_DEBUG_OBJECT (element, "Setting children start, (initiated_move: %" GST_PTR_FORMAT ")", container->initiated_move); /* get copy of children, since GESContainer may resort the clip */ children = ges_container_get_children (container, FALSE); container->children_control_mode = GES_CHILDREN_IGNORE_NOTIFIES; for (tmp = children; tmp; tmp = g_list_next (tmp)) { GESTimelineElement *child = (GESTimelineElement *) tmp->data; if (child != container->initiated_move) _set_start0 (GES_TIMELINE_ELEMENT (child), start); } container->children_control_mode = GES_CHILDREN_UPDATE; g_list_free_full (children, gst_object_unref); return TRUE; } /* returns TRUE if we did not break early */ static gboolean _set_childrens_inpoint (GESTimelineElement * element, GstClockTime inpoint, gboolean break_on_failure) { GESClip *self = GES_CLIP (element); GList *tmp; GESClipPrivate *priv = self->priv; gboolean prev_prevent = priv->prevent_duration_limit_update; priv->setting_inpoint = TRUE; priv->prevent_duration_limit_update = TRUE; for (tmp = GES_CONTAINER_CHILDREN (element); tmp; tmp = tmp->next) { GESTimelineElement *child = tmp->data; if (_IS_CORE_INTERNAL_SOURCE_CHILD (child)) { if (!_set_inpoint0 (child, inpoint)) { GST_ERROR_OBJECT ("Could not set the in-point of child %" GES_FORMAT " to %" GST_TIME_FORMAT, GES_ARGS (child), GST_TIME_ARGS (inpoint)); if (break_on_failure) { priv->setting_inpoint = FALSE; priv->prevent_duration_limit_update = prev_prevent; return FALSE; } } } } priv->setting_inpoint = FALSE; priv->prevent_duration_limit_update = prev_prevent; _update_duration_limit (self); return TRUE; } static gboolean _set_inpoint (GESTimelineElement * element, GstClockTime inpoint) { if (!_can_set_inpoint_of_core_children (GES_CLIP (element), inpoint, NULL)) { GST_WARNING_OBJECT (element, "Cannot set the in-point to %" GST_TIME_FORMAT, GST_TIME_ARGS (inpoint)); return FALSE; } if (!_set_childrens_inpoint (element, inpoint, TRUE)) { _set_childrens_inpoint (element, element->inpoint, FALSE); return FALSE; } return TRUE; } static gboolean _set_duration (GESTimelineElement * element, GstClockTime duration) { GList *tmp, *children; GESContainer *container = GES_CONTAINER (element); /* get copy of children, since GESContainer may resort the clip */ children = ges_container_get_children (container, FALSE); container->children_control_mode = GES_CHILDREN_IGNORE_NOTIFIES; for (tmp = container->children; tmp; tmp = g_list_next (tmp)) { GESTimelineElement *child = (GESTimelineElement *) tmp->data; if (child != container->initiated_move) _set_duration0 (GES_TIMELINE_ELEMENT (child), duration); } container->children_control_mode = GES_CHILDREN_UPDATE; g_list_free_full (children, gst_object_unref); return TRUE; } static gboolean _set_max_duration (GESTimelineElement * element, GstClockTime maxduration) { GList *tmp; GList *child_data = NULL; GESClip *self = GES_CLIP (element); GESClipPrivate *priv = self->priv; GstClockTime new_min = GST_CLOCK_TIME_NONE; gboolean has_core = FALSE; gboolean res = FALSE; gboolean prev_prevent = priv->prevent_duration_limit_update; /* if we are setting based on a change in the minimum */ if (priv->updating_max_duration) return TRUE; /* else, we set every core child to have the same max duration */ /* check that the duration-limit can be changed */ for (tmp = GES_CONTAINER_CHILDREN (self); tmp; tmp = tmp->next) { GESTrackElement *child = tmp->data; DurationLimitData *data = _duration_limit_data_new (child); if (_IS_CORE_INTERNAL_SOURCE_CHILD (child)) data->max_duration = maxduration; child_data = g_list_prepend (child_data, data); } if (!_can_update_duration_limit (self, child_data, NULL)) { GST_WARNING_OBJECT (self, "Cannot set the max-duration from %" GST_TIME_FORMAT " to %" GST_TIME_FORMAT " because the " "duration-limit cannot be adjusted", GST_TIME_ARGS (element->maxduration), GST_TIME_ARGS (maxduration)); return FALSE; } priv->prevent_duration_limit_update = TRUE; priv->setting_max_duration = TRUE; for (tmp = GES_CONTAINER_CHILDREN (element); tmp; tmp = tmp->next) { GESTimelineElement *child = tmp->data; if (_IS_CORE_CHILD (child)) { has_core = TRUE; if (ges_track_element_has_internal_source (GES_TRACK_ELEMENT (child))) { if (!ges_timeline_element_set_max_duration (child, maxduration)) GST_ERROR_OBJECT ("Could not set the max-duration of child %" GES_FORMAT " to %" GST_TIME_FORMAT, GES_ARGS (child), GST_TIME_ARGS (maxduration)); new_min = _MIN_CLOCK_TIME (new_min, child->maxduration); } } } priv->setting_max_duration = FALSE; priv->prevent_duration_limit_update = prev_prevent; if (!has_core) { /* allow max-duration to be set arbitrarily when we have no * core children, even though there is no actual minimum max-duration * when it has no core children */ if (GST_CLOCK_TIME_IS_VALID (maxduration)) GST_INFO_OBJECT (element, "Allowing max-duration of the clip to be set to %" GST_TIME_FORMAT " because it has no core children", GST_TIME_ARGS (maxduration)); res = TRUE; goto done; } if (new_min != maxduration) { if (GST_CLOCK_TIME_IS_VALID (new_min)) GST_WARNING_OBJECT (element, "Failed to set the max-duration of the " "clip to %" GST_TIME_FORMAT " because it was not possible to " "match this with the actual minimum of %" GST_TIME_FORMAT, GST_TIME_ARGS (maxduration), GST_TIME_ARGS (new_min)); else GST_WARNING_OBJECT (element, "Failed to set the max-duration of the " "clip to %" GST_TIME_FORMAT " because it has no core children " "whose max-duration could be set to anything other than " "GST_CLOCK_TIME_NONE", GST_TIME_ARGS (maxduration)); priv->updating_max_duration = TRUE; ges_timeline_element_set_max_duration (element, new_min); priv->updating_max_duration = FALSE; goto done; } res = TRUE; done: _update_duration_limit (self); return res; } static gboolean _set_priority (GESTimelineElement * element, guint32 priority) { GESClipPrivate *priv = GES_CLIP (element)->priv; GList *tmp; guint32 min_prio, max_prio, min_child_prio = G_MAXUINT32; gboolean prev_prevent = priv->prevent_duration_limit_update; gboolean prev_prevent_outpoint = priv->prevent_children_outpoint_update; GESContainer *container = GES_CONTAINER (element); for (tmp = container->children; tmp; tmp = g_list_next (tmp)) min_child_prio = MIN (min_child_prio, _PRIORITY (tmp->data)); /* send the new 'priority' to determine what the new 'min_prio' should * be for the clip */ _get_priority_range_full (container, &min_prio, &max_prio, priority); /* offsets will remain constant for the children */ priv->prevent_resort = TRUE; priv->prevent_duration_limit_update = TRUE; priv->prevent_children_outpoint_update = TRUE; priv->setting_priority = TRUE; for (tmp = container->children; tmp; tmp = g_list_next (tmp)) { GESTimelineElement *child = tmp->data; guint32 track_element_prio = min_prio + (child->priority - min_child_prio); if (track_element_prio > max_prio) { GST_WARNING_OBJECT (container, "%s priority of %i, is outside of its " "containing layer space. (%d/%d) setting it to the maximum it can be", child->name, priority, min_prio, max_prio); track_element_prio = max_prio; } _set_priority0 (child, track_element_prio); } /* no need to re-sort the container since we maintained the relative * offsets. As such, the height and duration-limit remains the same as * well. */ priv->prevent_resort = FALSE; priv->setting_priority = FALSE; priv->prevent_duration_limit_update = prev_prevent; priv->prevent_children_outpoint_update = prev_prevent_outpoint; return TRUE; } static guint32 _get_layer_priority (GESTimelineElement * element) { GESClip *clip = GES_CLIP (element); if (clip->priv->layer == NULL) return GES_TIMELINE_ELEMENT_NO_LAYER_PRIORITY; return ges_layer_get_priority (clip->priv->layer); } static gboolean _get_natural_framerate (GESTimelineElement * self, gint * framerate_n, gint * framerate_d) { GESAsset *asset = ges_extractable_get_asset (GES_EXTRACTABLE (self)); if (!asset) { GST_WARNING_OBJECT (self, "No asset set?"); return FALSE; } return ges_clip_asset_get_natural_framerate (GES_CLIP_ASSET (asset), framerate_n, framerate_d); } /**************************************************** * * * GESContainer virtual methods implementation * * * ****************************************************/ static void _compute_height (GESContainer * container) { GList *tmp; guint32 min_prio = G_MAXUINT32, max_prio = 0; if (container->children == NULL) { /* FIXME Why not 0! */ _ges_container_set_height (container, 1); return; } /* Go over all childs and check if height has changed */ for (tmp = container->children; tmp; tmp = tmp->next) { guint tck_priority = _PRIORITY (tmp->data); if (tck_priority < min_prio) min_prio = tck_priority; if (tck_priority > max_prio) max_prio = tck_priority; } _ges_container_set_height (container, max_prio - min_prio + 1); } void ges_clip_take_add_error (GESClip * clip, GError ** error) { GESClipPrivate *priv = clip->priv; g_clear_error (error); if (error) { if (*error) { GST_ERROR_OBJECT (clip, "Error not handled: %s", (*error)->message); g_error_free (*error); } *error = priv->add_error; } else { g_clear_error (&priv->add_error); } priv->add_error = NULL; } void ges_clip_set_add_error (GESClip * clip, GError * error) { GESClipPrivate *priv = clip->priv; g_clear_error (&priv->add_error); priv->add_error = error; } static gboolean _add_child (GESContainer * container, GESTimelineElement * element) { gboolean ret = FALSE; GESClip *self = GES_CLIP (container); GESTrackElement *track_el = GES_TRACK_ELEMENT (element); GESClipClass *klass = GES_CLIP_GET_CLASS (self); guint32 min_prio, max_prio, new_prio; GESTrack *track; GESTimeline *timeline = GES_TIMELINE_ELEMENT_TIMELINE (container); GESClipPrivate *priv = self->priv; GESAsset *asset, *creator_asset; gboolean prev_prevent = priv->prevent_duration_limit_update; gboolean prev_prevent_outpoint = priv->prevent_children_outpoint_update; GList *tmp; GError *error = NULL; g_return_val_if_fail (GES_IS_TRACK_ELEMENT (element), FALSE); if (element->timeline && element->timeline != timeline) { GST_WARNING_OBJECT (self, "Cannot add %" GES_FORMAT " as a child " "because its timeline is %" GST_PTR_FORMAT " rather than the " "clip's timeline %" GST_PTR_FORMAT, GES_ARGS (element), element->timeline, timeline); goto done; } asset = ges_extractable_get_asset (GES_EXTRACTABLE (self)); creator_asset = ges_track_element_get_creator_asset (track_el); if (creator_asset && asset != creator_asset) { GST_WARNING_OBJECT (self, "Cannot add the track element %" GES_FORMAT " as a child " "because it is a core element created by another clip with a " "different asset to the current clip's asset", GES_ARGS (element)); goto done; } track = ges_track_element_get_track (track_el); if (track && ges_track_get_timeline (track) != timeline) { /* really, an element in a track should have the same timeline as * the track, so we would have checked this with the * element->timeline check. But technically a user could get around * this, so we double check here. */ GST_WARNING_OBJECT (self, "Cannot add %" GES_FORMAT " as a child " "because its track %" GST_PTR_FORMAT " is part of the timeline %" GST_PTR_FORMAT " rather than the clip's timeline %" GST_PTR_FORMAT, GES_ARGS (element), track, ges_track_get_timeline (track), timeline); goto done; } /* NOTE: notifies are currently frozen by ges_container_add */ _get_priority_range (container, &min_prio, &max_prio); if (creator_asset) { /* NOTE: Core track elements that are base effects are added like any * other core elements. In particular, they are *not* added to the * list of added effects, so we do not increase nb_effects. */ /* Set the core element to have the same in-point, which we don't * apply to effects */ GstClockTime new_inpoint; if (ges_track_element_has_internal_source (track_el)) new_inpoint = _INPOINT (self); else new_inpoint = 0; /* new priority is that of the lowest priority core child. Usually * each core child has the same priority. * Also must be lower than all effects */ new_prio = min_prio; for (tmp = container->children; tmp; tmp = tmp->next) { if (_IS_CORE_CHILD (tmp->data)) new_prio = MAX (new_prio, _PRIORITY (tmp->data)); else if (_IS_TOP_EFFECT (tmp->data)) new_prio = MAX (new_prio, _PRIORITY (tmp->data) + 1); } if (track && !priv->allow_any_track) { GList *child_data; DurationLimitData *data; GESTrackElement *core = _find_core_in_track (self, track); if (core) { GST_WARNING_OBJECT (self, "Cannot add the core child %" GES_FORMAT " because it is in the same track %" GST_PTR_FORMAT " as an " "existing core child %" GES_FORMAT, GES_ARGS (element), track, GES_ARGS (core)); goto done; } data = _duration_limit_data_new (track_el); data->inpoint = new_inpoint; data->priority = new_prio; child_data = _duration_limit_data_list_with_data (self, data); if (!_can_update_duration_limit (self, child_data, &error)) { GST_INFO_OBJECT (self, "Cannot add core %" GES_FORMAT " as a " "child because the duration-limit cannot be adjusted", GES_ARGS (element)); goto done; } } if (GES_CLOCK_TIME_IS_LESS (element->maxduration, new_inpoint)) { GST_INFO_OBJECT (self, "Can not set the in-point of the " "element %" GES_FORMAT " to %" GST_TIME_FORMAT " because its " "max-duration is %" GST_TIME_FORMAT, GES_ARGS (element), GST_TIME_ARGS (new_inpoint), GST_TIME_ARGS (element->maxduration)); g_set_error (&error, GES_ERROR, GES_ERROR_NOT_ENOUGH_INTERNAL_CONTENT, "Cannot add the child \"%s\" to clip \"%s\" because its max-" "duration is %" GST_TIME_FORMAT ", which is less than the in-" "point of the clip %" GST_TIME_FORMAT, element->name, GES_TIMELINE_ELEMENT_NAME (self), GST_TIME_ARGS (element->maxduration), GST_TIME_ARGS (new_inpoint)); goto done; } /* adding can fail if the max-duration of the element is smaller * than the current in-point of the clip */ if (!_set_inpoint0 (element, new_inpoint)) { GST_WARNING_OBJECT (self, "Could not set the in-point of the " "element %" GES_FORMAT " to %" GST_TIME_FORMAT ". Not adding " "as a child", GES_ARGS (element), GST_TIME_ARGS (new_inpoint)); goto done; } _set_priority0 (element, new_prio); } else if (GES_CLIP_CLASS_CAN_ADD_EFFECTS (klass) && _IS_TOP_EFFECT (element)) { /* Add the effect at the lowest priority among effects (just after * the core elements). Need to shift the core elements up by 1 * to make room. */ /* new priority is the lowest priority effect */ if (priv->use_effect_priority) { new_prio = priv->effect_priority; } else { new_prio = min_prio; for (tmp = container->children; tmp; tmp = tmp->next) { if (_IS_TOP_EFFECT (tmp->data)) new_prio = MAX (new_prio, _PRIORITY (tmp->data) + 1); } } /* make sure higher than core */ for (tmp = container->children; tmp; tmp = tmp->next) { if (_IS_CORE_CHILD (tmp->data)) new_prio = MIN (new_prio, _PRIORITY (tmp->data)); } if (track && !priv->allow_any_track) { GList *child_data, *tmp; DurationLimitData *data; GESTrackElement *core = _find_core_in_track (self, track); if (!core) { GST_WARNING_OBJECT (self, "Cannot add the effect %" GES_FORMAT " because its track %" GST_PTR_FORMAT " does not contain one " "of the clip's core children", GES_ARGS (element), track); goto done; } data = _duration_limit_data_new (track_el); data->priority = new_prio; if (!ges_track_element_is_active (core)) data->active = FALSE; child_data = _duration_limit_data_list_with_data (self, data); for (tmp = child_data; tmp; tmp = tmp->next) { data = tmp->data; if (data->priority >= new_prio) data->priority++; } if (!_can_update_duration_limit (self, child_data, &error)) { GST_INFO_OBJECT (self, "Cannot add effect %" GES_FORMAT " as " "a child because the duration-limit cannot be adjusted", GES_ARGS (element)); goto done; } } _update_active_for_track (self, track_el); priv->nb_effects++; GST_DEBUG_OBJECT (self, "Adding %ith effect: %" GES_FORMAT " Priority %i", priv->nb_effects, GES_ARGS (element), new_prio); /* changing priorities, and updating their offset */ priv->prevent_resort = TRUE; priv->setting_priority = TRUE; priv->prevent_duration_limit_update = TRUE; priv->prevent_children_outpoint_update = TRUE; /* increase the priority of anything with a lower priority */ for (tmp = container->children; tmp; tmp = tmp->next) { GESTimelineElement *child = tmp->data; if (child->priority >= new_prio) ges_timeline_element_set_priority (child, child->priority + 1); } _set_priority0 (element, new_prio); priv->prevent_resort = FALSE; priv->setting_priority = FALSE; priv->prevent_duration_limit_update = prev_prevent; priv->prevent_children_outpoint_update = prev_prevent_outpoint; /* no need to call _ges_container_sort_children (container) since * there is no change to the ordering yet (this happens after the * child is actually added) */ /* The height has already changed (increased by 1) */ _compute_height (container); /* update duration limit in _child_added */ } else { if (_IS_TOP_EFFECT (element)) GST_WARNING_OBJECT (self, "Cannot add the effect %" GES_FORMAT " because it is not a core element created by the clip itself " "and the %s class does not allow for adding extra effects", GES_ARGS (element), G_OBJECT_CLASS_NAME (klass)); else if (GES_CLIP_CLASS_CAN_ADD_EFFECTS (klass)) GST_WARNING_OBJECT (self, "Cannot add the track element %" GES_FORMAT " because it is neither a core element created by " "the clip itself, nor a GESBaseEffect", GES_ARGS (element)); else GST_WARNING_OBJECT (self, "Cannot add the track element %" GES_FORMAT " because it is not a core element created by the " "clip itself", GES_ARGS (element)); goto done; } _set_start0 (element, GES_TIMELINE_ELEMENT_START (self)); _set_duration0 (element, GES_TIMELINE_ELEMENT_DURATION (self)); ret = TRUE; done: if (error) ges_clip_set_add_error (self, error); return ret; } void ges_clip_take_remove_error (GESClip * clip, GError ** error) { GESClipPrivate *priv = clip->priv; g_clear_error (error); if (error) { if (*error) { GST_ERROR ("Error not handled: %s", (*error)->message); g_error_free (*error); } *error = priv->remove_error; } else { g_clear_error (&priv->remove_error); } priv->remove_error = NULL; } void ges_clip_set_remove_error (GESClip * clip, GError * error) { GESClipPrivate *priv = clip->priv; g_clear_error (&priv->remove_error); priv->remove_error = error; } static gboolean _remove_child (GESContainer * container, GESTimelineElement * element) { GESTrackElement *el = GES_TRACK_ELEMENT (element); GESClip *self = GES_CLIP (container); GESClipPrivate *priv = self->priv; /* check that the duration-limit can be changed */ /* If we are removing a core child, then all other children in the * same track will be removed from the track, which will make the * duration-limit increase, which is safe * Similarly, if it has no track, the duration-limit will not change */ if (!priv->allow_any_remove && !_IS_CORE_CHILD (element) && ges_track_element_get_track (el)) { GList *child_data = NULL; GList *tmp; GError *error = NULL; for (tmp = container->children; tmp; tmp = tmp->next) { GESTrackElement *child = tmp->data; if (child == el) continue; child_data = g_list_prepend (child_data, _duration_limit_data_new (child)); } if (!_can_update_duration_limit (self, child_data, &error)) { ges_clip_set_remove_error (self, error); GST_INFO_OBJECT (self, "Cannot remove the child %" GES_FORMAT " because the duration-limit cannot be adjusted", GES_ARGS (el)); return FALSE; } } /* NOTE: notifies are currently frozen by ges_container_add */ if (_IS_TOP_EFFECT (element)) { GList *tmp; gboolean prev_prevent = priv->prevent_duration_limit_update; gboolean prev_prevent_outpoint = priv->prevent_children_outpoint_update; GST_DEBUG_OBJECT (container, "Resyncing effects priority."); /* changing priorities, so preventing a re-sort */ priv->prevent_resort = TRUE; priv->setting_priority = TRUE; priv->prevent_duration_limit_update = TRUE; priv->prevent_children_outpoint_update = TRUE; for (tmp = container->children; tmp; tmp = tmp->next) { guint32 sibling_prio = GES_TIMELINE_ELEMENT_PRIORITY (tmp->data); if (sibling_prio > element->priority) ges_timeline_element_set_priority (GES_TIMELINE_ELEMENT (tmp->data), sibling_prio - 1); } priv->nb_effects--; priv->prevent_resort = FALSE; priv->setting_priority = FALSE; priv->prevent_duration_limit_update = prev_prevent; priv->prevent_children_outpoint_update = prev_prevent_outpoint; /* no need to re-sort the children since the rest keep the same * relative priorities */ /* height may have changed */ _compute_height (container); } /* duration-limit updated in _child_removed */ return TRUE; } static void _child_added (GESContainer * container, GESTimelineElement * element) { GESClip *self = GES_CLIP (container); g_signal_connect (element, "notify", G_CALLBACK (_child_property_changed_cb), self); if (GES_IS_TIME_EFFECT (element)) g_signal_connect (element, "deep-notify", G_CALLBACK (_child_time_property_changed_cb), self); if (_IS_CORE_CHILD (element)) _update_max_duration (container); _update_duration_limit (self); _update_children_outpoints (self); } static void _child_removed (GESContainer * container, GESTimelineElement * element) { GESClip *self = GES_CLIP (container); g_signal_handlers_disconnect_by_func (element, _child_property_changed_cb, self); /* NOTE: we do not test if the effect is a time effect since technically * it can stop being a time effect, although this would be rare */ g_signal_handlers_disconnect_by_func (element, _child_time_property_changed_cb, self); if (_IS_CORE_CHILD (element)) _update_max_duration (container); _update_duration_limit (self); _update_children_outpoints (self); ges_track_element_update_outpoint (GES_TRACK_ELEMENT (element)); } static void add_clip_to_list (gpointer key, gpointer clip, GList ** list) { *list = g_list_append (*list, gst_object_ref (clip)); } /* NOTE: Since this does not change the track of @child, this should * only be called if it is guaranteed that neither @from_clip nor @to_clip * will not break the track rules: * + no more than one core child per track * + every non-core child must be in the same track as a core child * NOTE: Since this does not change the creator asset of the child, this * should only be called for transferring children between clips with the * same asset. * NOTE: This also prevents the update of the duration-limit, so you * should ensure that you call _update_duration_limit on both clips when * transferring has completed. */ static void _transfer_child (GESClip * from_clip, GESClip * to_clip, GESTrackElement * child) { GESTimeline *timeline = GES_TIMELINE_ELEMENT_TIMELINE (to_clip); gboolean prev_prevent_from = from_clip->priv->prevent_duration_limit_update; gboolean prev_prevent_to = to_clip->priv->prevent_duration_limit_update; gboolean prev_prevent_outpoint_from = from_clip->priv->prevent_children_outpoint_update; gboolean prev_prevent_outpoint_to = to_clip->priv->prevent_children_outpoint_update; /* We need to bump the refcount to avoid the object to be destroyed */ gst_object_ref (child); /* don't want to change tracks */ ges_timeline_set_moving_track_elements (timeline, TRUE); from_clip->priv->prevent_duration_limit_update = TRUE; to_clip->priv->prevent_duration_limit_update = TRUE; from_clip->priv->prevent_children_outpoint_update = TRUE; to_clip->priv->prevent_children_outpoint_update = TRUE; from_clip->priv->allow_any_remove = TRUE; ges_container_remove (GES_CONTAINER (from_clip), GES_TIMELINE_ELEMENT (child)); from_clip->priv->allow_any_remove = FALSE; to_clip->priv->allow_any_track = TRUE; if (!ges_container_add (GES_CONTAINER (to_clip), GES_TIMELINE_ELEMENT (child))) GST_ERROR ("%" GES_FORMAT " could not add child %p while" " transfering, this should never happen", GES_ARGS (to_clip), child); to_clip->priv->allow_any_track = FALSE; ges_timeline_set_moving_track_elements (timeline, FALSE); from_clip->priv->prevent_duration_limit_update = prev_prevent_from; to_clip->priv->prevent_duration_limit_update = prev_prevent_to; from_clip->priv->prevent_children_outpoint_update = prev_prevent_outpoint_from; to_clip->priv->prevent_children_outpoint_update = prev_prevent_outpoint_to; gst_object_unref (child); } static GList * _ungroup (GESContainer * container, gboolean recursive) { GESClip *tmpclip; GESTrackType track_type; GESTrackElement *track_element; gboolean first_obj = TRUE; GList *tmp, *children, *ret = NULL; GESClip *clip = GES_CLIP (container); GESTimelineElement *element = GES_TIMELINE_ELEMENT (container); GESLayer *layer = clip->priv->layer; GHashTable *_tracktype_clip = g_hash_table_new (g_int_hash, g_int_equal); /* If there is no TrackElement, just return @container in a list */ if (GES_CONTAINER_CHILDREN (container) == NULL) { GST_DEBUG ("No TrackElement, simply returning"); return g_list_prepend (ret, container); } children = ges_container_get_children (container, FALSE); /* _add_child will add core elements at the lowest priority and new * non-core effects at the lowest effect priority, so we need to add * the highest priority children first to preserve the effect order. * @children is already ordered by highest priority first */ for (tmp = children; tmp; tmp = tmp->next) { track_element = GES_TRACK_ELEMENT (tmp->data); track_type = ges_track_element_get_track_type (track_element); tmpclip = g_hash_table_lookup (_tracktype_clip, &track_type); if (tmpclip == NULL) { if (G_UNLIKELY (first_obj == TRUE)) { tmpclip = clip; first_obj = FALSE; } else { tmpclip = GES_CLIP (ges_timeline_element_copy (element, FALSE)); if (layer) { /* Add new container to the same layer as @container */ ges_clip_set_moving_from_layer (tmpclip, TRUE); /* adding to the same layer should not fail when moving */ ges_layer_add_clip (layer, tmpclip); ges_clip_set_moving_from_layer (tmpclip, FALSE); } } g_hash_table_insert (_tracktype_clip, &track_type, tmpclip); ges_clip_set_supported_formats (tmpclip, track_type); } /* Move trackelement to the container it is supposed to land into */ /* Note: it is safe to transfer the element whilst not changing tracks * because all track elements in the same track will stay in the * same clip */ if (tmpclip != clip) _transfer_child (clip, tmpclip, track_element); } g_list_free_full (children, gst_object_unref); g_hash_table_foreach (_tracktype_clip, (GHFunc) add_clip_to_list, &ret); g_hash_table_unref (_tracktype_clip); /* Need to update the duration limit. * Since we have divided the clip by its tracks, the duration-limit, * which is a minimum value calculated per track, can only increase in * value, which means the duration of the clip should not change, which * means updating should always be possible */ for (tmp = ret; tmp; tmp = tmp->next) _update_duration_limit (tmp->data); return ret; } static gboolean _group_test_share_track (GESClip * clip1, GESClip * clip2) { GList *tmp1, *tmp2; GESTrackElement *child1, *child2; for (tmp1 = GES_CONTAINER_CHILDREN (clip1); tmp1; tmp1 = tmp1->next) { child1 = tmp1->data; for (tmp2 = GES_CONTAINER_CHILDREN (clip2); tmp2; tmp2 = tmp2->next) { child2 = tmp2->data; if (ges_track_element_get_track (child1) == ges_track_element_get_track (child2)) { GST_INFO_OBJECT (clip1, "Cannot group with clip %" GES_FORMAT " because its child %" GES_FORMAT " shares the same " "track with our child %" GES_FORMAT, GES_ARGS (clip2), GES_ARGS (child2), GES_ARGS (child1)); return TRUE; } } } return FALSE; } #define _GROUP_TEST_EQUAL(val, expect, format) \ if (val != expect) { \ GST_INFO_OBJECT (clip, "Cannot group with other clip %" GES_FORMAT \ " because the clip's " #expect " is %" format " rather than the " \ #expect " of the other clip %" format, GES_ARGS (first_clip), val, \ expect); \ return NULL; \ } static GESContainer * _group (GList * containers) { GESClip *first_clip = NULL; GESTimeline *timeline; GESTrackType supported_formats; GESLayer *layer; GList *tmp, *tmp2, *tmpclip; GstClockTime start, inpoint, duration; GESTimelineElement *element; GESAsset *asset; GESContainer *ret = NULL; if (!containers) return NULL; for (tmp = containers; tmp; tmp = tmp->next) { if (GES_IS_CLIP (tmp->data) == FALSE) { GST_DEBUG ("Can only work with clips"); return NULL; } if (!first_clip) { first_clip = tmp->data; element = GES_TIMELINE_ELEMENT (first_clip); start = element->start; inpoint = element->inpoint; duration = element->duration; timeline = element->timeline; layer = first_clip->priv->layer; asset = ges_extractable_get_asset (GES_EXTRACTABLE (first_clip)); } } for (tmp = containers; tmp; tmp = tmp->next) { GESClip *clip; GESAsset *cmp_asset; element = GES_TIMELINE_ELEMENT (tmp->data); clip = GES_CLIP (element); _GROUP_TEST_EQUAL (element->start, start, G_GUINT64_FORMAT); _GROUP_TEST_EQUAL (element->duration, duration, G_GUINT64_FORMAT); _GROUP_TEST_EQUAL (element->inpoint, inpoint, G_GUINT64_FORMAT); _GROUP_TEST_EQUAL (element->timeline, timeline, GST_PTR_FORMAT); _GROUP_TEST_EQUAL (clip->priv->layer, layer, GST_PTR_FORMAT); cmp_asset = ges_extractable_get_asset (GES_EXTRACTABLE (clip)); if (cmp_asset != asset) { GST_INFO_OBJECT (clip, "Cannot group with other clip %" GES_FORMAT " because the clip's asset is %s rather than " " the asset of the other clip %s", GES_ARGS (first_clip), cmp_asset ? ges_asset_get_id (cmp_asset) : NULL, asset ? ges_asset_get_id (asset) : NULL); return NULL; } /* make sure we don't share the same track */ for (tmp2 = tmp->next; tmp2; tmp2 = tmp2->next) { if (_group_test_share_track (clip, tmp2->data)) return NULL; } } /* And now pass all TrackElements to the first clip, * and remove others from the layer (updating the supported formats) */ ret = containers->data; supported_formats = GES_CLIP (ret)->priv->supportedformats; for (tmpclip = containers->next; tmpclip; tmpclip = tmpclip->next) { GESClip *cclip = tmpclip->data; GList *children = ges_container_get_children (GES_CONTAINER (cclip), FALSE); /* _add_child will add core elements at the lowest priority and new * non-core effects at the lowest effect priority, so we need to add * the highest priority children first to preserve the effect order. * @children is already ordered by highest priority first. * Priorities between children in different tracks (as tmpclips are) * is not important */ for (tmp = children; tmp; tmp = tmp->next) { GESTrackElement *celement = GES_TRACK_ELEMENT (tmp->data); /* Note: it is safe to transfer the element whilst not changing * tracks because the elements from different clips will have * children in separate tracks. So it should not be possible for * two core children to appear in the same track */ _transfer_child (cclip, GES_CLIP (ret), celement); supported_formats |= ges_track_element_get_track_type (celement); } g_list_free_full (children, gst_object_unref); /* duration-limit should be GST_CLOCK_TIME_NONE now that we have no * children */ _update_duration_limit (cclip); if (layer) ges_layer_remove_clip (layer, cclip); } /* Need to update the duration limit. * Each received clip C_i that has been grouped may have had a different * duration-limit L_i. In each case the duration must be less than * this limit, and since each clip shares the same duration, we have * for each clip C_i: * duration <= L_i * Thus: * duration <= min_i (L_i) * * Now, upon grouping each clip C_i into C, we have not changed the * children properties that affect the duration-limit. And since the * duration-limit is calculated as the minimum amongst the tracks of C, * this means that the duration-limit for C should be * L = min_i (L_i) >= duration * Therefore, we can safely set the duration-limit of C to L without * changing the duration of C. */ _update_duration_limit (GES_CLIP (ret)); ges_clip_set_supported_formats (GES_CLIP (ret), supported_formats); return ret; } void ges_clip_empty_from_track (GESClip * clip, GESTrack * track) { GList *tmp; gboolean prev_prevent = clip->priv->prevent_duration_limit_update; gboolean prev_prevent_outpoint = clip->priv->prevent_children_outpoint_update; if (track == NULL) return; /* allow us to remove in any order */ clip->priv->allow_any_track = TRUE; clip->priv->prevent_duration_limit_update = TRUE; clip->priv->prevent_children_outpoint_update = TRUE; for (tmp = GES_CONTAINER_CHILDREN (clip); tmp; tmp = tmp->next) { GESTrackElement *child = tmp->data; if (ges_track_element_get_track (child) == track) { if (!ges_track_remove_element (track, child)) GST_ERROR_OBJECT (clip, "Failed to remove child %" GES_FORMAT " from the track %" GST_PTR_FORMAT, GES_ARGS (child), track); } } clip->priv->allow_any_track = FALSE; clip->priv->prevent_duration_limit_update = prev_prevent; clip->priv->prevent_children_outpoint_update = prev_prevent_outpoint; _update_duration_limit (clip); _update_children_outpoints (clip); } static GESTrackElement * _copy_track_element_to (GESTrackElement * orig, GESClip * to_clip, GstClockTime position) { GESTrackElement *copy; GESTimelineElement *el_copy, *el_orig; /* NOTE: we do not deep copy the track element, we instead call * ges_track_element_copy_properties explicitly, which is the * deep_copy for the GESTrackElementClass. */ el_orig = GES_TIMELINE_ELEMENT (orig); el_copy = ges_timeline_element_copy (el_orig, FALSE); if (el_copy == NULL) return NULL; copy = GES_TRACK_ELEMENT (el_copy); ges_track_element_copy_properties (el_orig, el_copy); /* NOTE: control bindings that are not registered in GES are not * handled */ ges_track_element_copy_bindings (orig, copy, position); ges_track_element_set_creator_asset (copy, ges_track_element_get_creator_asset (orig)); return copy; } static GESTrackElement * ges_clip_copy_track_element_into (GESClip * clip, GESTrackElement * orig, GstClockTime position) { GESTimeline *timeline = GES_TIMELINE_ELEMENT_TIMELINE (clip); GESTrackElement *copy; copy = _copy_track_element_to (orig, clip, position); if (copy == NULL) { GST_ERROR_OBJECT (clip, "Failed to create a copy of the " "element %" GES_FORMAT " for the clip", GES_ARGS (orig)); return NULL; } gst_object_ref (copy); ges_timeline_set_moving_track_elements (timeline, TRUE); if (!ges_container_add (GES_CONTAINER (clip), GES_TIMELINE_ELEMENT (copy))) { GST_ERROR_OBJECT (clip, "Failed to add the copied child track " "element %" GES_FORMAT " to the clip", GES_ARGS (copy)); ges_timeline_set_moving_track_elements (timeline, FALSE); gst_object_unref (copy); return NULL; } ges_timeline_set_moving_track_elements (timeline, FALSE); /* now owned by the clip */ gst_object_unref (copy); return copy; } static void _deep_copy (GESTimelineElement * element, GESTimelineElement * copy) { GList *tmp; GESClip *self = GES_CLIP (element), *ccopy = GES_CLIP (copy); GESTrackElement *el, *el_copy; /* NOTE: this should only be called on a newly created @copy, so * its copied_track_elements, and copied_layer, should be free to set * without disposing of the previous values */ for (tmp = GES_CONTAINER_CHILDREN (element); tmp; tmp = tmp->next) { el = GES_TRACK_ELEMENT (tmp->data); el_copy = _copy_track_element_to (el, ccopy, GST_CLOCK_TIME_NONE); if (!el_copy) { GST_ERROR_OBJECT (element, "Failed to copy the track element %" GES_FORMAT " for pasting", GES_ARGS (el)); continue; } /* owned by copied_track_elements */ gst_object_ref_sink (el_copy); /* _add_child will add core elements at the lowest priority and new * non-core effects at the lowest effect priority, so we need to add * the highest priority children first to preserve the effect order. * The clip's children are already ordered by highest priority first. * So we order copied_track_elements in the same way */ ccopy->priv->copied_track_elements = g_list_append (ccopy->priv->copied_track_elements, el_copy); } ccopy->priv->copied_layer = g_object_ref (self->priv->layer); ccopy->priv->copied_timeline = self->priv->layer->timeline; } static GESTimelineElement * _paste (GESTimelineElement * element, GESTimelineElement * ref, GstClockTime paste_position) { GList *tmp; GESClip *self = GES_CLIP (element); GESLayer *layer = self->priv->copied_layer; GESClip *nclip = GES_CLIP (ges_timeline_element_copy (element, FALSE)); ges_timeline_element_set_start (GES_TIMELINE_ELEMENT (nclip), paste_position); /* paste in order of priority (highest first) */ for (tmp = self->priv->copied_track_elements; tmp; tmp = tmp->next) ges_clip_copy_track_element_into (nclip, tmp->data, GST_CLOCK_TIME_NONE); if (layer) { if (layer->timeline != self->priv->copied_timeline) { GST_WARNING_OBJECT (self, "Cannot be pasted into the layer %" GST_PTR_FORMAT " because its timeline has changed", layer); gst_object_ref_sink (nclip); gst_object_unref (nclip); return NULL; } /* adding the clip to the layer will add it to the tracks, but not * necessarily the same ones depending on select-tracks-for-object */ if (!ges_layer_add_clip (layer, nclip)) { GST_INFO ("%" GES_FORMAT " could not be pasted to %" GST_TIME_FORMAT, GES_ARGS (element), GST_TIME_ARGS (paste_position)); return NULL; } } /* NOTE: self should not be used and be freed after this call, so we can * leave the freeing of copied_layer and copied_track_elements to the * dispose method */ return GES_TIMELINE_ELEMENT (nclip); } static gboolean _lookup_child (GESTimelineElement * self, const gchar * prop_name, GObject ** child, GParamSpec ** pspec) { GList *tmp; if (GES_TIMELINE_ELEMENT_CLASS (ges_clip_parent_class)->lookup_child (self, prop_name, child, pspec)) return TRUE; for (tmp = GES_CONTAINER_CHILDREN (self); tmp; tmp = tmp->next) { if (ges_timeline_element_lookup_child (tmp->data, prop_name, child, pspec)) return TRUE; } return FALSE; } /**************************************************** * * * GObject virtual methods implementation * * * ****************************************************/ static void ges_clip_get_property (GObject * object, guint property_id, GValue * value, GParamSpec * pspec) { GESClip *clip = GES_CLIP (object); switch (property_id) { case PROP_LAYER: g_value_set_object (value, clip->priv->layer); break; case PROP_SUPPORTED_FORMATS: g_value_set_flags (value, clip->priv->supportedformats); break; case PROP_DURATION_LIMIT: g_value_set_uint64 (value, clip->priv->duration_limit); break; default: G_OBJECT_WARN_INVALID_PROPERTY_ID (object, property_id, pspec); } } static void ges_clip_set_property (GObject * object, guint property_id, const GValue * value, GParamSpec * pspec) { GESClip *clip = GES_CLIP (object); switch (property_id) { case PROP_SUPPORTED_FORMATS: ges_clip_set_supported_formats (clip, g_value_get_flags (value)); break; default: G_OBJECT_WARN_INVALID_PROPERTY_ID (object, property_id, pspec); } } static void ges_clip_dispose (GObject * object) { GESClip *self = GES_CLIP (object); self->priv->allow_any_remove = TRUE; g_list_free_full (self->priv->copied_track_elements, gst_object_unref); self->priv->copied_track_elements = NULL; g_clear_object (&self->priv->copied_layer); g_clear_error (&self->priv->add_error); self->priv->add_error = NULL; g_clear_error (&self->priv->remove_error); self->priv->remove_error = NULL; G_OBJECT_CLASS (ges_clip_parent_class)->dispose (object); } static void ges_clip_class_init (GESClipClass * klass) { GObjectClass *object_class = G_OBJECT_CLASS (klass); GESContainerClass *container_class = GES_CONTAINER_CLASS (klass); GESTimelineElementClass *element_class = GES_TIMELINE_ELEMENT_CLASS (klass); object_class->get_property = ges_clip_get_property; object_class->set_property = ges_clip_set_property; object_class->dispose = ges_clip_dispose; klass->create_track_elements = ges_clip_create_track_elements_func; klass->create_track_element = NULL; /** * GESClip:supported-formats: * * The #GESTrackType-s that the clip supports, which it can create * #GESTrackElement-s for. Note that this can be a combination of * #GESTrackType flags to indicate support for several * #GESTrackElement:track-type elements. */ properties[PROP_SUPPORTED_FORMATS] = g_param_spec_flags ("supported-formats", "Supported formats", "Formats supported by the clip", GES_TYPE_TRACK_TYPE, GES_TRACK_TYPE_AUDIO | GES_TRACK_TYPE_VIDEO, G_PARAM_READWRITE | G_PARAM_CONSTRUCT); g_object_class_install_property (object_class, PROP_SUPPORTED_FORMATS, properties[PROP_SUPPORTED_FORMATS]); /** * GESClip:layer: * * The layer this clip lies in. * * If you want to connect to this property's #GObject::notify signal, * you should connect to it with g_signal_connect_after() since the * signal emission may be stopped internally. */ properties[PROP_LAYER] = g_param_spec_object ("layer", "Layer", "The GESLayer where this clip is being used.", GES_TYPE_LAYER, G_PARAM_READABLE | G_PARAM_EXPLICIT_NOTIFY); g_object_class_install_property (object_class, PROP_LAYER, properties[PROP_LAYER]); /** * GESClip:duration-limit: * * The maximum #GESTimelineElement:duration that can be *currently* set * for the clip, taking into account the #GESTimelineElement:in-point, * #GESTimelineElement:max-duration, #GESTrackElement:active, and * #GESTrackElement:track properties of its children, as well as any * time effects. If there is no limit, this will be set to * #GST_CLOCK_TIME_NONE. * * Note that whilst a clip has no children in any tracks, the limit will * be unknown, and similarly set to #GST_CLOCK_TIME_NONE. * * If the duration-limit would ever go below the current * #GESTimelineElement:duration of the clip due to a change in the above * variables, its #GESTimelineElement:duration will be set to the new * limit. * * Since: 1.18 */ properties[PROP_DURATION_LIMIT] = g_param_spec_uint64 ("duration-limit", "Duration Limit", "A limit on the duration of the clip", 0, G_MAXUINT64, GST_CLOCK_TIME_NONE, G_PARAM_READABLE | G_PARAM_EXPLICIT_NOTIFY); g_object_class_install_property (object_class, PROP_DURATION_LIMIT, properties[PROP_DURATION_LIMIT]); element_class->set_start = _set_start; element_class->set_duration = _set_duration; element_class->set_inpoint = _set_inpoint; element_class->set_priority = _set_priority; element_class->set_max_duration = _set_max_duration; element_class->paste = _paste; element_class->deep_copy = _deep_copy; element_class->lookup_child = _lookup_child; element_class->get_layer_priority = _get_layer_priority; element_class->get_natural_framerate = _get_natural_framerate; container_class->add_child = _add_child; container_class->remove_child = _remove_child; container_class->child_removed = _child_removed; container_class->child_added = _child_added; container_class->ungroup = _ungroup; container_class->group = _group; container_class->grouping_priority = G_MAXUINT; } static void ges_clip_init (GESClip * self) { self->priv = ges_clip_get_instance_private (self); self->priv->duration_limit = GST_CLOCK_TIME_NONE; } /** * ges_clip_create_track_element: * @clip: A #GESClip * @type: The track to create an element for * * Creates the core #GESTrackElement of the clip, of the given track type. * * Returns: (transfer floating) (nullable): The element created * by @clip, or %NULL if @clip can not provide a track element for the * given @type or an error occurred. */ GESTrackElement * ges_clip_create_track_element (GESClip * clip, GESTrackType type) { GESClipClass *class; GESTrackElement *res; g_return_val_if_fail (GES_IS_CLIP (clip), NULL); GST_DEBUG_OBJECT (clip, "Creating track element for %s", ges_track_type_name (type)); if (!(type & clip->priv->supportedformats)) { GST_DEBUG_OBJECT (clip, "We don't support this track type %i", type); return NULL; } class = GES_CLIP_GET_CLASS (clip); if (G_UNLIKELY (class->create_track_element == NULL)) { GST_ERROR ("No 'create_track_element' implementation available fo type %s", G_OBJECT_TYPE_NAME (clip)); return NULL; } res = class->create_track_element (clip, type); return res; } /** * ges_clip_create_track_elements: * @clip: A #GESClip * @type: The track-type to create elements for * * Creates the core #GESTrackElement-s of the clip, of the given track * type. * * Returns: (transfer container) (element-type GESTrackElement): A list of * the #GESTrackElement-s created by @clip for the given @type, or %NULL * if no track elements are created or an error occurred. */ GList * ges_clip_create_track_elements (GESClip * clip, GESTrackType type) { GList *tmp, *ret; GESClipClass *klass; gboolean already_created = FALSE; GESAsset *asset; g_return_val_if_fail (GES_IS_CLIP (clip), NULL); if ((clip->priv->supportedformats & type) == 0) return NULL; klass = GES_CLIP_GET_CLASS (clip); if (!(klass->create_track_elements)) { GST_WARNING ("no GESClip::create_track_elements implentation"); return NULL; } GST_DEBUG_OBJECT (clip, "Creating TrackElements for type: %s", ges_track_type_name (type)); for (tmp = GES_CONTAINER_CHILDREN (clip); tmp; tmp = tmp->next) { GESTrackElement *child = GES_TRACK_ELEMENT (tmp->data); if (_IS_CORE_CHILD (child) && ges_track_element_get_track_type (child) & type) { /* assume the core track elements have all been created if we find * at least one core child with the same type */ already_created = TRUE; break; } } if (already_created) return NULL; ret = klass->create_track_elements (clip, type); asset = ges_extractable_get_asset (GES_EXTRACTABLE (clip)); for (tmp = ret; tmp; tmp = tmp->next) ges_track_element_set_creator_asset (tmp->data, asset); return ret; } /* * default implementation of GESClipClass::create_track_elements */ GList * ges_clip_create_track_elements_func (GESClip * clip, GESTrackType type) { GESTrackElement *result; GST_DEBUG_OBJECT (clip, "Creating trackelement for track: %s", ges_track_type_name (type)); result = ges_clip_create_track_element (clip, type); if (!result) { GST_DEBUG ("Did not create track element"); return NULL; } return g_list_append (NULL, result); } void ges_clip_set_layer (GESClip * clip, GESLayer * layer) { if (layer == clip->priv->layer) return; clip->priv->layer = layer; GST_DEBUG ("clip:%p, layer:%p", clip, layer); /* We do not want to notify the setting of layer = NULL when * it is actually the result of a move between layer (as we know * that it will be added to another layer right after, and this * is what imports here.) */ if (!ELEMENT_FLAG_IS_SET (clip, GES_CLIP_IS_MOVING)) g_object_notify_by_pspec (G_OBJECT (clip), properties[PROP_LAYER]); } /** * ges_clip_set_moving_from_layer: * @clip: A #GESClip * @is_moving: %TRUE if you want to start moving @clip to another layer * %FALSE when you finished moving it * * Sets the clip in a moving to layer state. You might rather use the * ges_clip_move_to_layer function to move #GESClip-s * from a layer to another. **/ void ges_clip_set_moving_from_layer (GESClip * clip, gboolean is_moving) { g_return_if_fail (GES_IS_CLIP (clip)); if (is_moving) ELEMENT_SET_FLAG (clip, GES_CLIP_IS_MOVING); else ELEMENT_UNSET_FLAG (clip, GES_CLIP_IS_MOVING); } /** * ges_clip_is_moving_from_layer: * @clip: A #GESClip * * Tells you if the clip is currently moving from a layer to another. * You might rather use the ges_clip_move_to_layer function to * move #GESClip-s from a layer to another. * * Returns: %TRUE if @clip is currently moving from its current layer * %FALSE otherwize. **/ gboolean ges_clip_is_moving_from_layer (GESClip * clip) { g_return_val_if_fail (GES_IS_CLIP (clip), FALSE); return ELEMENT_FLAG_IS_SET (clip, GES_CLIP_IS_MOVING); } /** * ges_clip_move_to_layer_full: * @clip: A #GESClip * @layer: The new layer * @error: (nullable): Return location for an error * * Moves a clip to a new layer. If the clip already exists in a layer, it * is first removed from its current layer before being added to the new * layer. * * Returns: %TRUE if @clip was successfully moved to @layer. * Since: 1.18 */ gboolean ges_clip_move_to_layer_full (GESClip * clip, GESLayer * layer, GError ** error) { gboolean ret = FALSE; GESLayer *current_layer; GESTimelineElement *element; g_return_val_if_fail (GES_IS_CLIP (clip), FALSE); g_return_val_if_fail (GES_IS_LAYER (layer), FALSE); g_return_val_if_fail (!error || !*error, FALSE); element = GES_TIMELINE_ELEMENT (clip); current_layer = clip->priv->layer; if (current_layer == layer) { GST_INFO_OBJECT (clip, "Already in the layer %" GST_PTR_FORMAT, layer); return TRUE; } if (current_layer == NULL) { GST_DEBUG ("Not moving %p, only adding it to %p", clip, layer); return ges_layer_add_clip (layer, clip); } if (element->timeline != layer->timeline) { /* make sure we can perform the can_move_element_check in the timeline * of the layer */ GST_WARNING_OBJECT (layer, "Cannot move clip %" GES_FORMAT " into " "the layer because its timeline %" GST_PTR_FORMAT " does not " "match the timeline of the layer %" GST_PTR_FORMAT, GES_ARGS (clip), element->timeline, layer->timeline); return FALSE; } if (layer->timeline && !GES_TIMELINE_ELEMENT_BEING_EDITED (clip)) { /* move to new layer, also checks moving of toplevel */ return timeline_tree_move (timeline_get_tree (layer->timeline), element, (gint64) ges_layer_get_priority (current_layer) - (gint64) ges_layer_get_priority (layer), 0, GES_EDGE_NONE, 0, error); } gst_object_ref (clip); ELEMENT_SET_FLAG (clip, GES_CLIP_IS_MOVING); GST_DEBUG_OBJECT (clip, "moving to layer %p, priority: %d", layer, ges_layer_get_priority (layer)); ret = ges_layer_remove_clip (current_layer, clip); if (!ret) { goto done; } ret = ges_layer_add_clip (layer, clip); if (ret) { g_object_notify_by_pspec (G_OBJECT (clip), properties[PROP_LAYER]); } else { /* try and move back into the original layer */ ges_layer_add_clip (current_layer, clip); } done: ELEMENT_UNSET_FLAG (clip, GES_CLIP_IS_MOVING); gst_object_unref (clip); return ret && (clip->priv->layer == layer); } /** * ges_clip_move_to_layer: * @clip: A #GESClip * @layer: The new layer * * See ges_clip_move_to_layer_full(), which also gives an error. * * Returns: %TRUE if @clip was successfully moved to @layer. */ gboolean ges_clip_move_to_layer (GESClip * clip, GESLayer * layer) { return ges_clip_move_to_layer_full (clip, layer, NULL); } /** * ges_clip_find_track_element: * @clip: A #GESClip * @track: (allow-none): The track to search in, or %NULL to search in * all tracks * @type: The type of track element to search for, or `G_TYPE_NONE` to * match any type * * Finds an element controlled by the clip. If @track is given, * then only the track elements in @track are searched for. If @type is * given, then this function searches for a track element of the given * @type. * * Note, if multiple track elements in the clip match the given criteria, * this will return the element amongst them with the highest * #GESTimelineElement:priority (numerically, the smallest). See * ges_clip_find_track_elements() if you wish to find all such elements. * * Returns: (transfer full) (nullable): The element controlled by * @clip, in @track, and of the given @type, or %NULL if no such element * could be found. */ GESTrackElement * ges_clip_find_track_element (GESClip * clip, GESTrack * track, GType type) { GList *tmp; GESTrackElement *otmp; GESTrackElement *ret = NULL; g_return_val_if_fail (GES_IS_CLIP (clip), NULL); g_return_val_if_fail (!(track == NULL && type == G_TYPE_NONE), NULL); for (tmp = GES_CONTAINER_CHILDREN (clip); tmp; tmp = g_list_next (tmp)) { otmp = (GESTrackElement *) tmp->data; if ((type != G_TYPE_NONE) && !G_TYPE_CHECK_INSTANCE_TYPE (tmp->data, type)) continue; if ((track == NULL) || (ges_track_element_get_track (otmp) == track)) { ret = GES_TRACK_ELEMENT (tmp->data); gst_object_ref (ret); break; } } return ret; } /** * ges_clip_get_layer: * @clip: A #GESClip * * Gets the #GESClip:layer of the clip. * * Returns: (transfer full) (nullable): The layer @clip is in, or %NULL if * @clip is not in any layer. */ GESLayer * ges_clip_get_layer (GESClip * clip) { g_return_val_if_fail (GES_IS_CLIP (clip), NULL); if (clip->priv->layer != NULL) gst_object_ref (G_OBJECT (clip->priv->layer)); return clip->priv->layer; } /** * ges_clip_get_duration_limit: * @clip: A #GESClip * * Gets the #GESClip:duration-limit of the clip. * * Returns: The duration-limit of @clip. * Since: 1.18 */ GstClockTime ges_clip_get_duration_limit (GESClip * clip) { g_return_val_if_fail (GES_IS_CLIP (clip), GST_CLOCK_TIME_NONE); return clip->priv->duration_limit; } static gint _cmp_children_by_priority (gconstpointer a_p, gconstpointer b_p) { const GESTimelineElement *a = a_p, *b = b_p; if (a->priority > b->priority) return 1; else if (a->priority < b->priority) return -1; return 0; } /** * ges_clip_add_top_effect: * @clip: A #GESClip * @effect: A top effect to add * @index: The index to add @effect at, or -1 to add at the highest * @error: (nullable): Return location for an error * * Add a top effect to a clip at the given index. * * Unlike using ges_container_add(), this allows you to set the index * in advance. It will also check that no error occurred during the track * selection for the effect. * * Note, only subclasses of #GESClipClass that have * #GES_CLIP_CLASS_CAN_ADD_EFFECTS set to %TRUE (such as #GESSourceClip * and #GESBaseEffectClip) can have additional top effects added. * * Note, if the effect is a time effect, this may be refused if the clip * would not be able to adapt itself once the effect is added. * * Returns: %TRUE if @effect was successfully added to @clip at @index. * Since: 1.18 */ gboolean ges_clip_add_top_effect (GESClip * clip, GESBaseEffect * effect, gint index, GError ** error) { GESClipPrivate *priv; GList *top_effects; GESTimelineElement *replace; GESTimeline *timeline; gboolean res; g_return_val_if_fail (GES_IS_CLIP (clip), FALSE); g_return_val_if_fail (GES_IS_BASE_EFFECT (effect), FALSE); g_return_val_if_fail (!error || !*error, FALSE); priv = clip->priv; if (index >= 0) { top_effects = ges_clip_get_top_effects (clip); replace = g_list_nth_data (top_effects, index); if (replace) { priv->use_effect_priority = TRUE; priv->effect_priority = replace->priority; } g_list_free_full (top_effects, gst_object_unref); } /* otherwise the default _add_child will place it at the lowest * priority / highest index */ timeline = GES_TIMELINE_ELEMENT_TIMELINE (clip); if (timeline) ges_timeline_set_track_selection_error (timeline, FALSE, NULL); /* note, if several tracks are selected, this may lead to several * effects being added to the clip. * The first effect we are adding will use the set effect_priority. * The error on the timeline could be from any of the copies */ ges_clip_set_add_error (clip, NULL); res = ges_container_add (GES_CONTAINER (clip), GES_TIMELINE_ELEMENT (effect)); priv->use_effect_priority = FALSE; if (!res) { /* if adding fails, there should have been no track selection, which * means no other elements were added so the clip, so the adding error * for the effect, if any, should still be available on the clip */ ges_clip_take_add_error (clip, error); return FALSE; } if (timeline && ges_timeline_take_track_selection_error (timeline, error)) goto remove; return TRUE; remove: if (!ges_container_remove (GES_CONTAINER (clip), GES_TIMELINE_ELEMENT (effect))) GST_ERROR_OBJECT (clip, "Failed to remove effect %" GES_FORMAT, GES_ARGS (effect)); return FALSE; } static gboolean _is_added_effect (GESClip * clip, GESBaseEffect * effect) { if (GES_TIMELINE_ELEMENT_PARENT (effect) != GES_TIMELINE_ELEMENT (clip)) { GST_WARNING_OBJECT (clip, "The effect %" GES_FORMAT " does not belong to this clip", GES_ARGS (effect)); return FALSE; } if (!_IS_TOP_EFFECT (effect)) { GST_WARNING_OBJECT (clip, "The effect %" GES_FORMAT " is not a top " "effect of this clip (it is a core element of the clip)", GES_ARGS (effect)); return FALSE; } return TRUE; } /** * ges_clip_remove_top_effect: * @clip: A #GESClip * @effect: The top effect to remove * @error: (nullable): Return location for an error * * Remove a top effect from the clip. * * Note, if the effect is a time effect, this may be refused if the clip * would not be able to adapt itself once the effect is removed. * * Returns: %TRUE if @effect was successfully added to @clip at @index. * Since: 1.18 */ gboolean ges_clip_remove_top_effect (GESClip * clip, GESBaseEffect * effect, GError ** error) { gboolean res; g_return_val_if_fail (GES_IS_CLIP (clip), FALSE); g_return_val_if_fail (GES_IS_BASE_EFFECT (effect), FALSE); g_return_val_if_fail (!error || !*error, FALSE); if (!_is_added_effect (clip, effect)) return FALSE; ges_clip_set_remove_error (clip, NULL); res = ges_container_remove (GES_CONTAINER (clip), GES_TIMELINE_ELEMENT (effect)); if (!res) ges_clip_take_remove_error (clip, error); return res; } /** * ges_clip_get_top_effects: * @clip: A #GESClip * * Gets the #GESBaseEffect-s that have been added to the clip. The * returned list is ordered by their internal index in the clip. See * ges_clip_get_top_effect_index(). * * Returns: (transfer full) (element-type GESTrackElement): A list of all * #GESBaseEffect-s that have been added to @clip. */ GList * ges_clip_get_top_effects (GESClip * clip) { GList *tmp, *ret; GESTimelineElement *child; g_return_val_if_fail (GES_IS_CLIP (clip), NULL); GST_DEBUG_OBJECT (clip, "Getting the %i top effects", clip->priv->nb_effects); ret = NULL; for (tmp = GES_CONTAINER_CHILDREN (clip); tmp; tmp = tmp->next) { child = tmp->data; if (_IS_TOP_EFFECT (child)) ret = g_list_append (ret, gst_object_ref (child)); } return g_list_sort (ret, _cmp_children_by_priority); } /** * ges_clip_get_top_effect_index: * @clip: A #GESClip * @effect: The effect we want to get the index of * * Gets the internal index of an effect in the clip. The index of effects * in a clip will run from 0 to n-1, where n is the total number of * effects. If two effects share the same #GESTrackElement:track, the * effect with the numerically lower index will be applied to the source * data **after** the other effect, i.e. output data will always flow from * a higher index effect to a lower index effect. * * Returns: The index of @effect in @clip, or -1 if something went wrong. */ gint ges_clip_get_top_effect_index (GESClip * clip, GESBaseEffect * effect) { GList *top_effects; gint ret; g_return_val_if_fail (GES_IS_CLIP (clip), -1); g_return_val_if_fail (GES_IS_BASE_EFFECT (effect), -1); if (!_is_added_effect (clip, effect)) return -1; top_effects = ges_clip_get_top_effects (clip); ret = g_list_index (top_effects, effect); g_list_free_full (top_effects, gst_object_unref); return ret; } /* TODO 2.0 remove as it is Deprecated */ gint ges_clip_get_top_effect_position (GESClip * clip, GESBaseEffect * effect) { return ges_clip_get_top_effect_index (clip, effect); } /* TODO 2.0 remove as it is Deprecated */ gboolean ges_clip_set_top_effect_priority (GESClip * clip, GESBaseEffect * effect, guint newpriority) { return ges_clip_set_top_effect_index (clip, effect, newpriority); } /** * ges_clip_set_top_effect_index_full: * @clip: A #GESClip * @effect: An effect within @clip to move * @newindex: The index for @effect in @clip * @error: (nullable): Return location for an error * * Set the index of an effect within the clip. See * ges_clip_get_top_effect_index(). The new index must be an existing * index of the clip. The effect is moved to the new index, and the other * effects may be shifted in index accordingly to otherwise maintain the * ordering. * * Returns: %TRUE if @effect was successfully moved to @newindex. * Since: 1.18 */ gboolean ges_clip_set_top_effect_index_full (GESClip * clip, GESBaseEffect * effect, guint newindex, GError ** error) { gint inc; GList *top_effects, *tmp; GList *child_data = NULL; guint32 current_prio, new_prio; GESTimelineElement *element, *replace; g_return_val_if_fail (GES_IS_CLIP (clip), FALSE); g_return_val_if_fail (GES_IS_BASE_EFFECT (effect), FALSE); g_return_val_if_fail (!error || !*error, FALSE); if (!_is_added_effect (clip, effect)) return FALSE; element = GES_TIMELINE_ELEMENT (effect); top_effects = ges_clip_get_top_effects (clip); replace = g_list_nth_data (top_effects, newindex); g_list_free_full (top_effects, gst_object_unref); if (!replace) { GST_WARNING_OBJECT (clip, "Does not contain %u effects", newindex + 1); return FALSE; } if (replace == element) return TRUE; current_prio = element->priority; new_prio = replace->priority; if (current_prio < new_prio) inc = -1; else inc = +1; /* check that the duration-limit can be changed */ for (tmp = GES_CONTAINER_CHILDREN (clip); tmp; tmp = tmp->next) { GESTimelineElement *child = tmp->data; guint32 priority = child->priority; DurationLimitData *data = _duration_limit_data_new (GES_TRACK_ELEMENT (child)); if (child == element) data->priority = new_prio; else if ((inc == +1 && priority >= new_prio && priority < current_prio) || (inc == -1 && priority <= new_prio && priority > current_prio)) data->priority = child->priority + inc; child_data = g_list_prepend (child_data, data); } if (!_can_update_duration_limit (clip, child_data, error)) { GST_INFO_OBJECT (clip, "Cannot move top effect %" GES_FORMAT " to index %i because the duration-limit cannot adjust", GES_ARGS (effect), newindex); return FALSE; } GST_DEBUG_OBJECT (clip, "Setting top effect %" GST_PTR_FORMAT "priority: %i", effect, new_prio); /* prevent a re-sort of the list whilst we are traversing it! */ clip->priv->prevent_resort = TRUE; clip->priv->setting_priority = TRUE; for (tmp = GES_CONTAINER_CHILDREN (clip); tmp; tmp = tmp->next) { GESTimelineElement *child = tmp->data; guint32 priority = child->priority; if (child == element) continue; /* only need to change the priority for those between the new and old * index */ if ((inc == +1 && priority >= new_prio && priority < current_prio) || (inc == -1 && priority <= new_prio && priority > current_prio)) _set_priority0 (child, priority + inc); } _set_priority0 (element, new_prio); clip->priv->prevent_resort = FALSE; clip->priv->setting_priority = FALSE; _ges_container_sort_children (GES_CONTAINER (clip)); /* height should have stayed the same */ return TRUE; } /** * ges_clip_set_top_effect_index: * @clip: A #GESClip * @effect: An effect within @clip to move * @newindex: The index for @effect in @clip * * See ges_clip_set_top_effect_index_full(), which also gives an error. * * Returns: %TRUE if @effect was successfully moved to @newindex. */ gboolean ges_clip_set_top_effect_index (GESClip * clip, GESBaseEffect * effect, guint newindex) { return ges_clip_set_top_effect_index_full (clip, effect, newindex, NULL); } /** * ges_clip_split_full: * @clip: The #GESClip to split * @position: The timeline position at which to perform the split, between * the start and end of the clip * @error: (optional) (nullable): Return location for an error * * Splits a clip at the given timeline position into two clips. The clip * must already have a #GESClip:layer. * * The original clip's #GESTimelineElement:duration is reduced such that * its end point matches the split position. Then a new clip is created in * the same layer, whose #GESTimelineElement:start matches the split * position and #GESTimelineElement:duration will be set such that its end * point matches the old end point of the original clip. Thus, the two * clips together will occupy the same positions in the timeline as the * original clip did. * * The children of the new clip will be new copies of the original clip's * children, so it will share the same sources and use the same * operations. * * The new clip will also have its #GESTimelineElement:in-point set so * that any internal data will appear in the timeline at the same time. * Thus, when the timeline is played, the playback of data should * appear the same. This may be complicated by any additional * #GESEffect-s that have been placed on the original clip that depend on * the playback time or change the data consumption rate of sources. This * method will attempt to translate these effects such that the playback * appears the same. In such complex situations, you may get a better * result if you place the clip in a separate sub #GESProject, which only * contains this clip (and its effects), and in the original layer * create two neighbouring #GESUriClip-s that reference this sub-project, * but at a different #GESTimelineElement:in-point. * * Returns: (transfer none) (nullable): The newly created clip resulting * from the splitting @clip, or %NULL if @clip can't be split. * * Since: 1.18 */ GESClip * ges_clip_split_full (GESClip * clip, guint64 position, GError ** error) { GList *tmp, *transitions = NULL; GESClip *new_object; gboolean no_core = FALSE; GstClockTime start, duration, old_duration, new_duration, new_inpoint; GESTimelineElement *element; GESTimeline *timeline; GHashTable *track_for_copy; guint32 layer_prio; g_return_val_if_fail (GES_IS_CLIP (clip), NULL); g_return_val_if_fail (clip->priv->layer, NULL); g_return_val_if_fail (GST_CLOCK_TIME_IS_VALID (position), NULL); g_return_val_if_fail (!error || !*error, NULL); element = GES_TIMELINE_ELEMENT (clip); timeline = element->timeline; duration = element->duration; start = element->start; if (position >= start + duration || position <= start) { GST_WARNING_OBJECT (clip, "Can not split %" GST_TIME_FORMAT " out of boundaries", GST_TIME_ARGS (position)); return NULL; } layer_prio = ges_timeline_element_get_layer_priority (element); old_duration = position - start; new_duration = duration + start - position; /* convert the split position into an internal core time */ new_inpoint = _convert_core_time (clip, position, FALSE, &no_core, error); /* if the split clip does not contain any active core elements with * an internal source, just set the in-point to 0 for the new_object */ if (no_core) new_inpoint = 0; if (!GST_CLOCK_TIME_IS_VALID (new_inpoint)) return NULL; if (timeline && !timeline_tree_can_move_element (timeline_get_tree (timeline), element, layer_prio, start, old_duration, error)) { GST_INFO_OBJECT (clip, "Can not split %" GES_FORMAT " at %" GST_TIME_FORMAT " as timeline would be in an illegal state.", GES_ARGS (clip), GST_TIME_ARGS (position)); return NULL; } if (timeline && !timeline_tree_can_move_element (timeline_get_tree (timeline), element, layer_prio, position, new_duration, error)) { GST_INFO_OBJECT (clip, "Can not split %" GES_FORMAT " at %" GST_TIME_FORMAT " as timeline would be in an illegal state.", GES_ARGS (clip), GST_TIME_ARGS (position)); return NULL; } GST_DEBUG_OBJECT (clip, "Spliting at %" GST_TIME_FORMAT, GST_TIME_ARGS (position)); /* Create the new Clip */ new_object = GES_CLIP (ges_timeline_element_copy (element, FALSE)); new_object->priv->prevent_duration_limit_update = TRUE; new_object->priv->prevent_children_outpoint_update = TRUE; GST_DEBUG_OBJECT (new_object, "New 'splitted' clip"); /* Set new timing properties on the Clip */ _set_start0 (GES_TIMELINE_ELEMENT (new_object), position); _set_inpoint0 (GES_TIMELINE_ELEMENT (new_object), new_inpoint); _set_duration0 (GES_TIMELINE_ELEMENT (new_object), new_duration); /* NOTE: it is technically possible that the new_object may shrink * later on in this method if the clip contains any non-linear time * effects, which cause the duration-limit to drop. However, this * should be safe since we have already checked with timeline-tree * that the split position is not in the middle of an overlap. This * means that the new_object should only be overlapping another * element on its end, which makes shrinking safe. * * The original clip, however, should not shrink if the time effects * obey the property that they do not depend on how much data they * receive, which should be true for the time effects supported by GES. */ /* split binding before duration changes since shrinking can destroy * binding values */ track_for_copy = g_hash_table_new_full (NULL, NULL, gst_object_unref, gst_object_unref); /* _add_child will add core elements at the lowest priority and new * non-core effects at the lowest effect priority, so we need to add the * highest priority children first to preserve the effect order. The * clip's children are already ordered by highest priority first. */ for (tmp = GES_CONTAINER_CHILDREN (clip); tmp; tmp = tmp->next) { GESTrackElement *copy, *orig = tmp->data; GESTrack *track = ges_track_element_get_track (orig); GESAutoTransition *trans; gchar *meta; copy = ges_clip_copy_track_element_into (new_object, orig, new_inpoint); if (!copy) continue; if (track) g_hash_table_insert (track_for_copy, gst_object_ref (copy), gst_object_ref (track)); meta = ges_meta_container_metas_to_string (GES_META_CONTAINER (orig)); ges_meta_container_add_metas_from_string (GES_META_CONTAINER (copy), meta); g_free (meta); trans = timeline ? ges_timeline_get_auto_transition_at_edge (timeline, orig, GES_EDGE_END) : NULL; if (trans) { trans->frozen = TRUE; ges_auto_transition_set_source (trans, copy, GES_EDGE_START); transitions = g_list_append (transitions, trans); } } GES_TIMELINE_ELEMENT_SET_BEING_EDITED (clip); _set_duration0 (GES_TIMELINE_ELEMENT (clip), old_duration); GES_TIMELINE_ELEMENT_UNSET_BEING_EDITED (clip); /* We do not want the timeline to create again TrackElement-s */ ges_clip_set_moving_from_layer (new_object, TRUE); /* adding to the same layer should not fail when moving */ ges_layer_add_clip (clip->priv->layer, new_object); ges_clip_set_moving_from_layer (new_object, FALSE); /* add to the track after the duration change so we don't overlap! */ for (tmp = GES_CONTAINER_CHILDREN (new_object); tmp; tmp = tmp->next) { GESTrackElement *copy = tmp->data; GESTrack *track = g_hash_table_lookup (track_for_copy, copy); if (track) { new_object->priv->allow_any_track = TRUE; ges_track_add_element (track, copy); new_object->priv->allow_any_track = FALSE; } } for (tmp = transitions; tmp; tmp = tmp->next) { GESAutoTransition *trans = tmp->data; trans->frozen = FALSE; ges_auto_transition_update (trans); } g_hash_table_unref (track_for_copy); g_list_free_full (transitions, gst_object_unref); new_object->priv->prevent_duration_limit_update = FALSE; new_object->priv->prevent_children_outpoint_update = FALSE; _update_duration_limit (new_object); _update_children_outpoints (new_object); return new_object; } /** * ges_clip_split: * @clip: The #GESClip to split * @position: The timeline position at which to perform the split * * See ges_clip_split_full(), which also gives an error. * * Returns: (transfer none) (nullable): The newly created clip resulting * from the splitting @clip, or %NULL if @clip can't be split. */ GESClip * ges_clip_split (GESClip * clip, guint64 position) { return ges_clip_split_full (clip, position, NULL); } /** * ges_clip_set_supported_formats: * @clip: A #GESClip * @supportedformats: The #GESTrackType-s supported by @clip * * Sets the #GESClip:supported-formats of the clip. This should normally * only be called by subclasses, which should be responsible for updating * its value, rather than the user. */ void ges_clip_set_supported_formats (GESClip * clip, GESTrackType supportedformats) { g_return_if_fail (GES_IS_CLIP (clip)); clip->priv->supportedformats = supportedformats; } /** * ges_clip_get_supported_formats: * @clip: A #GESClip * * Gets the #GESClip:supported-formats of the clip. * * Returns: The #GESTrackType-s supported by @clip. */ GESTrackType ges_clip_get_supported_formats (GESClip * clip) { g_return_val_if_fail (GES_IS_CLIP (clip), GES_TRACK_TYPE_UNKNOWN); return clip->priv->supportedformats; } /** * ges_clip_add_asset: * @clip: A #GESClip * @asset: An asset with #GES_TYPE_TRACK_ELEMENT as its * #GESAsset:extractable-type * * Extracts a #GESTrackElement from an asset and adds it to the clip. * This can be used to add effects that derive from the asset to the * clip, but this method is not intended to be used to create the core * elements of the clip. * * Returns: (transfer none) (nullable): The newly created element, or * %NULL if an error occurred. */ /* FIXME: this is not used elsewhere in the GES library */ GESTrackElement * ges_clip_add_asset (GESClip * clip, GESAsset * asset) { GESTrackElement *element; g_return_val_if_fail (GES_IS_CLIP (clip), NULL); g_return_val_if_fail (GES_IS_ASSET (asset), NULL); g_return_val_if_fail (g_type_is_a (ges_asset_get_extractable_type (asset), GES_TYPE_TRACK_ELEMENT), NULL); element = GES_TRACK_ELEMENT (ges_asset_extract (asset, NULL)); if (!ges_container_add (GES_CONTAINER (clip), GES_TIMELINE_ELEMENT (element))) return NULL; return element; } /** * ges_clip_find_track_elements: * @clip: A #GESClip * @track: (allow-none): The track to search in, or %NULL to search in * all tracks * @track_type: The track-type of the track element to search for, or * #GES_TRACK_TYPE_UNKNOWN to match any track type * @type: The type of track element to search for, or %G_TYPE_NONE to * match any type * * Finds the #GESTrackElement-s controlled by the clip that match the * given criteria. If @track is given as %NULL and @track_type is given as * #GES_TRACK_TYPE_UNKNOWN, then the search will match all elements in any * track, including those with no track, and of any * #GESTrackElement:track-type. Otherwise, if @track is not %NULL, but * @track_type is #GES_TRACK_TYPE_UNKNOWN, then only the track elements in * @track are searched for. Otherwise, if @track_type is not * #GES_TRACK_TYPE_UNKNOWN, but @track is %NULL, then only the track * elements whose #GESTrackElement:track-type matches @track_type are * searched for. Otherwise, when both are given, the track elements that * match **either** criteria are searched for. Therefore, if you wish to * only find elements in a specific track, you should give the track as * @track, but you should not give the track's #GESTrack:track-type as * @track_type because this would also select elements from other tracks * of the same type. * * You may also give @type to _further_ restrict the search to track * elements of the given @type. * * Returns: (transfer full) (element-type GESTrackElement): A list of all * the #GESTrackElement-s controlled by @clip, in @track or of the given * @track_type, and of the given @type. */ GList * ges_clip_find_track_elements (GESClip * clip, GESTrack * track, GESTrackType track_type, GType type) { GList *tmp; GESTrackElement *otmp; GList *ret = NULL; g_return_val_if_fail (GES_IS_CLIP (clip), NULL); g_return_val_if_fail (!(track == NULL && type == G_TYPE_NONE && track_type == GES_TRACK_TYPE_UNKNOWN), NULL); for (tmp = GES_CONTAINER_CHILDREN (clip); tmp; tmp = g_list_next (tmp)) { otmp = (GESTrackElement *) tmp->data; if ((type != G_TYPE_NONE) && !G_TYPE_CHECK_INSTANCE_TYPE (tmp->data, type)) continue; /* TODO 2.0: an AND condition, using a condition like the above type * check would have made more sense here. Especially when both * track != NULL and track_type != GES_TRACK_TYPE_UNKNOWN are given */ if ((track == NULL && track_type == GES_TRACK_TYPE_UNKNOWN) || (track != NULL && ges_track_element_get_track (otmp) == track) || (track_type != GES_TRACK_TYPE_UNKNOWN && ges_track_element_get_track_type (otmp) == track_type)) ret = g_list_append (ret, gst_object_ref (otmp)); } return ret; } /* Convert from an internal time of a child within a clip to a * =========================================================== * timeline time * ============= * * Given an internal time T for some child in a clip, we want to know * what the corresponding time in the timeline is. * * If the time T is between the in-point and out-point of the child, * then we can convert to the timeline coordinates by answering: * * a) "What is the timeline time at which the internal data from the child * found at time T appears in the timeline output?" * * If the time T is after the out-point of the child, we instead want to * answer: * * b) "If we extended the clip indefinetly in the timeline, what would be * the timeline time at which the internal data from the child found at * time T would appear in the timeline output?" * * However, if the time T is before the in-point of the child, we instead * want to answer a more subtle question: * * c) "If we set the 'in-point' of the child to T, what would we need to * set the 'start' of the clip to such that the internal data from the * child currently found at the *beginning* of the clip would then appear * at the same timeline time?" * * E.g. consider the following children of a clip, all in the same track, * and all active: * T * : * +=====================:======+ * | _/ \_ | * | source ~(o_o)~ | * | / @ \ | * +=====================:======+ * i : * : * +=====================:======+ * | time-effect0 : | | g0 * +=====================:======+ v * : * +=====================:======+ * | overlay : | * +=====================:======+ * i' : * : * +=====================:======+ * | time-effect1 : | | g1 * +=====================:======+ v * : * -------------------------------:-------------------timeline * S X * * where i is the in-point of the source and i' is the in-point of the * overlay. Also, g0 is the sink_to_source translation function for the * first time effect, and g1 is the same for the second. S is the start of * the clip. The ~(o_o)~ figure is the data that appears in the source at * T. * * Essentially, question a) wants us to convert from the time T, where the * data is, which is in the internal time coordinates of the source, to * the timeline time X. First, we subtract i to convert from the internal * source coordinates of the source to the external source coordinates of * the source, then we apply the sink_to_source translation functions, * which act on external source coordinates, then add 'start' to finally * convert to the timeline coordinates. So overall we have * * X = S + g1(g0(T - i)) * * To answer b), T would be beyond the end of the clip. Since g1 and g0 * can convert beyond the end time, we similarly compute * * X = S + g1(g0(T - i)) * * The user themselves should note that this could exceed the max-duration * of any of the children. * * Now consider * * T * : * : +============================+ * : \_ | * : _o)~ source | * : @ \ | * : +============================+ * : i * : * : +============================+ * : | time-effect0 | | g0 * : +============================+ v * : * : +============================+ * : | overlay | * : +============================+ * : i' * : * : +============================+ * : | time-effect1 | | g1 * : +============================+ v * : * ---:-----------------------------------------------timeline * X S * * To do the same as a), we would need to be able to convert from T to X, * but this isn't defined since the children do not extend to here. More * specifically, the functions g0 and g1 are not defined for negative * times. Instead, we want to answer question c). That is, we want to know * what we should set the start of the clip to to keep the figure at the * same timeline position if we change the in-point of the source to T. * * First, if we set the in-point to T, then we would have * * T * : * +============================+ * | _/ \_ | * | ~(o_o)~ source | * | / @ \ | * +============================+ * : i * : : * +=====:======================+ * | : time-effect0 | | g0 * +=====:======================+ v * : : * +=====:======================+ * | : overlay | * +=====:======================+ * : : * +=====:======================+ * | : time-effect1 | | g1 * +=====:======================+ v * : : * ---:-----:-----:-----------------------------------timeline * X S Y * * In order to make the figure appear at 'start' again, we would need to * reduce the start of the clip by the difference between S and Y, where * Y is the conversion of the previous in-point i to the timeline time. * * Thus, * * X = S - (Y - S) * = S - (S + g1(g0(i - T)) - S) * = S - g1(g0(i - T)) * * If this would be negative, the conversion will not be possible. * * Note, we are relying on the *assumption* that the translation functions * *do not* change when we change the in-point. GESBaseEffect only claims * to support such time effects. * * Note that if g0 and g1 are simply identities, and we translate the * internal time using a) and b), we calculate * * S + (T - i) * * and for c), we calculate * * S - (i - T) = S + (T - i) * * In summary, if we are converting from internal time T to a timeline * time the return is * * G(T) = { S + g1(g0(T - i)) if T >= i, * { S - g1(g0(i - T)) otherwise. * * Note that the overlay did not play a role since it overall translates * all received times by the identity. Note that we could similarly want * to convert from an internal time in the overlay to the timeline time. * This would be given by * * S + g1(T - i') if T >= i', * S - g1(i' - T) otherwise. * * * Convert from a timeline time to an internal time of a child * =========================================================== * in a clip * ========= * * We basically want to reverse the previous conversion. Specifically, * when the timeline time X is between the start and end of the clip we * want to answer: * * d) "What is the internal time at which the data from the child that * appears in the timeline at time X is created in the child?" * * If the time X is after the end of the clip, we instead want to answer: * * e) "If we extended the clip indefinetly in the timeline, what would be * the internal time at which the data from the child that appears in the * timeline at time T would be created in the child?" * * However, if the time X is before the start of the child, we instead * want to answer: * * f) "If we set the 'start' of the clip to X, what would we need to * set the 'in-point' of the clip to such that the internal data from the * child currently found at the *beginning* of the clip would then appear * at the same timeline time?" * * Following the same arguments, these would all be answered by * * F(X) = { i + f0(f1(X - S)) if X >= S, * { i - f0(f1(S - X)) otherwise. * * where f0 and f1 are the corresponding source_to_sink translation * functions, which should be close reverses of g0 and g1, respectively. * * Note that this does indeed reverse the internal to timeline conversion: * * F(G(T)) = { i + f0(f1(G(T) - S)) if G(T) >= S, * { i - f0(f1(S - G(T))) otherwise. * * but, since g1 and g0 map from [0,inf) to [0,inf), * * G(T) - S = { + g1(g0(T - i)) if T >= i, * { - g1(g0(i - T)) otherwise. * { >= 0 if T >= i, * { = 0 if (T < i and g1(g0(i - T)) = 0) * { < 0 otherwise. * * => ( G(T) >= S <==> T >= i or (T < i and g1(g0(i - T)) = 0) ) * * therefore * F(G(T)) = { i + f0(f1(g1(g0(T - i)))) if T >= i, * { i + f0(f1(0)) if T < i * { and g1(g0(i - T)) = 0, * { i - f0(f1(g1(g0(i - T)))) otherwise * * = { i + f0(f1(g1(g0(T - i)))) if T >= i, * { i - f0(f1(g1(g0(i - T)))) otherwise * * = T * * because f1 reverses g1, and f0 reverses g0. */ /* returns higher priority first */ static GList * _active_time_effects_in_track_after_priority (GESClip * clip, GESTrack * track, guint32 priority) { GList *tmp, *list = NULL; for (tmp = GES_CONTAINER_CHILDREN (clip); tmp; tmp = tmp->next) { GESTrackElement *child = tmp->data; if (GES_IS_TIME_EFFECT (child) && ges_track_element_get_track (child) == track && ges_track_element_is_active (child) && _PRIORITY (child) < priority) list = g_list_prepend (list, child); } return g_list_sort (list, _cmp_children_by_priority); } /** * ges_clip_get_timeline_time_from_internal_time: * @clip: A #GESClip * @child: An #GESTrackElement:active child of @clip with a * #GESTrackElement:track * @internal_time: A time in the internal time coordinates of @child * @error: (nullable): Return location for an error * * Convert the internal source time from the child to a timeline time. * This will take any time effects placed on the clip into account (see * #GESBaseEffect for what time effects are supported, and how to * declare them in GES). * * When @internal_time is above the #GESTimelineElement:in-point of * @child, this will return the timeline time at which the internal * content found at @internal_time appears in the output of the timeline's * track. For example, this would let you know where in the timeline a * particular scene in a media file would appear. * * This will be done assuming the clip has an indefinite end, so the * timeline time may be beyond the end of the clip, or even breaking its * #GESClip:duration-limit. * * If, instead, @internal_time is below the current * #GESTimelineElement:in-point of @child, this will return what you would * need to set the #GESTimelineElement:start of @clip to if you set the * #GESTimelineElement:in-point of @child to @internal_time and wanted to * keep the content of @child currently found at the current * #GESTimelineElement:start of @clip at the same timeline position. If * this would be negative, the conversion fails. This is useful for * determining what position to use in a #GES_EDIT_MODE_TRIM if you wish * to trim to a specific point in the internal content, such as a * particular scene in a media file. * * Note that whilst a clip has no time effects, this second return is * equivalent to finding the timeline time at which the content of @child * at @internal_time would be found in the timeline if it had indefinite * extent in both directions. However, with non-linear time effects this * second return will be more distinct. * * In either case, the returned time would be appropriate to use in * ges_timeline_element_edit() for #GES_EDIT_MODE_TRIM, and similar, if * you wish to use a particular internal point as a reference. For * example, you could choose to end a clip at a certain internal * 'out-point', similar to the #GESTimelineElement:in-point, by * translating the desired end time into the timeline coordinates, and * using this position to trim the end of a clip. * * See ges_clip_get_internal_time_from_timeline_time(), which performs the * reverse, or ges_clip_get_timeline_time_from_source_frame() which does * the same conversion, but using frame numbers. * * Returns: The time in the timeline coordinates corresponding to * @internal_time, or #GST_CLOCK_TIME_NONE if the conversion could not be * performed. * * Since: 1.18 */ GstClockTime ges_clip_get_timeline_time_from_internal_time (GESClip * clip, GESTrackElement * child, GstClockTime internal_time, GError ** error) { GstClockTime inpoint, start, external_time; gboolean decrease; GESTrack *track; GList *tmp, *time_effects; g_return_val_if_fail (GES_IS_CLIP (clip), GST_CLOCK_TIME_NONE); g_return_val_if_fail (GES_IS_TRACK_ELEMENT (child), GST_CLOCK_TIME_NONE); g_return_val_if_fail (!error || !*error, GST_CLOCK_TIME_NONE); if (!g_list_find (GES_CONTAINER_CHILDREN (clip), child)) { GST_WARNING_OBJECT (clip, "The track element %" GES_FORMAT " is not " "a child of the clip", GES_ARGS (child)); return GST_CLOCK_TIME_NONE; } track = ges_track_element_get_track (child); if (!track) { GST_WARNING_OBJECT (clip, "Cannot convert the internal time of the " "child %" GES_FORMAT " to a timeline time because it is not part " "of a track", GES_ARGS (child)); return GST_CLOCK_TIME_NONE; } if (!ges_track_element_is_active (child)) { GST_WARNING_OBJECT (clip, "Cannot convert the internal time of the " "child %" GES_FORMAT " to a timeline time because it is not " "active in its track", GES_ARGS (child)); return GST_CLOCK_TIME_NONE; } if (internal_time == GST_CLOCK_TIME_NONE) return GST_CLOCK_TIME_NONE; inpoint = _INPOINT (child); if (inpoint <= internal_time) { decrease = FALSE; external_time = internal_time - inpoint; } else { decrease = TRUE; external_time = inpoint - internal_time; } time_effects = _active_time_effects_in_track_after_priority (clip, track, _PRIORITY (child)); /* currently ordered with highest priority (closest to the timeline) * first, with @child being at the *end* of the list. * Want to reverse this so we can convert from the child towards the * timeline */ time_effects = g_list_reverse (time_effects); for (tmp = time_effects; tmp; tmp = tmp->next) { GESBaseEffect *effect = tmp->data; GHashTable *values = ges_base_effect_get_time_property_values (effect); external_time = ges_base_effect_translate_sink_to_source_time (effect, external_time, values); g_hash_table_unref (values); } g_list_free (time_effects); if (!GST_CLOCK_TIME_IS_VALID (external_time)) return GST_CLOCK_TIME_NONE; start = _START (clip); if (!decrease) return start + external_time; if (external_time > start) { GST_INFO_OBJECT (clip, "Cannot convert the internal time %" GST_TIME_FORMAT " of the child %" GES_FORMAT " to a timeline " "time because it would lie before the start of the timeline", GST_TIME_ARGS (internal_time), GES_ARGS (child)); g_set_error (error, GES_ERROR, GES_ERROR_NEGATIVE_TIME, "The internal time %" GST_TIME_FORMAT " of child \"%s\" " "would correspond to a negative start of -%" GST_TIME_FORMAT " for the clip \"%s\"", GST_TIME_ARGS (internal_time), GES_TIMELINE_ELEMENT_NAME (child), GST_TIME_ARGS (external_time - start), GES_TIMELINE_ELEMENT_NAME (clip)); return GST_CLOCK_TIME_NONE; } return start - external_time; } /** * ges_clip_get_internal_time_from_timeline_time: * @clip: A #GESClip * @child: An #GESTrackElement:active child of @clip with a * #GESTrackElement:track * @timeline_time: A time in the timeline time coordinates * @error: (nullable): Return location for an error * * Convert the timeline time to an internal source time of the child. * This will take any time effects placed on the clip into account (see * #GESBaseEffect for what time effects are supported, and how to * declare them in GES). * * When @timeline_time is above the #GESTimelineElement:start of @clip, * this will return the internal time at which the content that appears at * @timeline_time in the output of the timeline is created in @child. For * example, if @timeline_time corresponds to the current seek position, * this would let you know which part of a media file is being read. * * This will be done assuming the clip has an indefinite end, so the * internal time may be beyond the current out-point of the child, or even * its #GESTimelineElement:max-duration. * * If, instead, @timeline_time is below the current * #GESTimelineElement:start of @clip, this will return what you would * need to set the #GESTimelineElement:in-point of @child to if you set * the #GESTimelineElement:start of @clip to @timeline_time and wanted * to keep the content of @child currently found at the current * #GESTimelineElement:start of @clip at the same timeline position. If * this would be negative, the conversion fails. This is useful for * determining what #GESTimelineElement:in-point would result from a * #GES_EDIT_MODE_TRIM to @timeline_time. * * Note that whilst a clip has no time effects, this second return is * equivalent to finding the internal time at which the content that * appears at @timeline_time in the timeline can be found in @child if it * had indefinite extent in both directions. However, with non-linear time * effects this second return will be more distinct. * * In either case, the returned time would be appropriate to use for the * #GESTimelineElement:in-point or #GESTimelineElement:max-duration of the * child. * * See ges_clip_get_timeline_time_from_internal_time(), which performs the * reverse. * * Returns: The time in the internal coordinates of @child corresponding * to @timeline_time, or #GST_CLOCK_TIME_NONE if the conversion could not * be performed. * Since: 1.18 */ GstClockTime ges_clip_get_internal_time_from_timeline_time (GESClip * clip, GESTrackElement * child, GstClockTime timeline_time, GError ** error) { GstClockTime inpoint, start, external_time; gboolean decrease; GESTrack *track; GList *tmp, *time_effects; g_return_val_if_fail (GES_IS_CLIP (clip), GST_CLOCK_TIME_NONE); g_return_val_if_fail (GES_IS_TRACK_ELEMENT (child), GST_CLOCK_TIME_NONE); g_return_val_if_fail (!error || !*error, GST_CLOCK_TIME_NONE); if (!g_list_find (GES_CONTAINER_CHILDREN (clip), child)) { GST_WARNING_OBJECT (clip, "The track element %" GES_FORMAT " is not " "a child of the clip", GES_ARGS (child)); return GST_CLOCK_TIME_NONE; } track = ges_track_element_get_track (child); if (!track) { GST_WARNING_OBJECT (clip, "Cannot convert the timeline time to an " "internal time of child %" GES_FORMAT " because it is not part " "of a track", GES_ARGS (child)); return GST_CLOCK_TIME_NONE; } if (!ges_track_element_is_active (child)) { GST_WARNING_OBJECT (clip, "Cannot convert the timeline time to an " "internal time of child %" GES_FORMAT " because it is not active " "in its track", GES_ARGS (child)); return GST_CLOCK_TIME_NONE; } if (timeline_time == GST_CLOCK_TIME_NONE) return GST_CLOCK_TIME_NONE; start = _START (clip); if (start <= timeline_time) { decrease = FALSE; external_time = timeline_time - start; } else { decrease = TRUE; external_time = start - timeline_time; } time_effects = _active_time_effects_in_track_after_priority (clip, track, _PRIORITY (child)); /* currently ordered with highest priority (closest to the timeline) * first, with @child being at the *end* of the list, which is what we * want */ for (tmp = time_effects; tmp; tmp = tmp->next) { GESBaseEffect *effect = tmp->data; GHashTable *values = ges_base_effect_get_time_property_values (effect); external_time = ges_base_effect_translate_source_to_sink_time (effect, external_time, values); g_hash_table_unref (values); } g_list_free (time_effects); if (!GST_CLOCK_TIME_IS_VALID (external_time)) return GST_CLOCK_TIME_NONE; inpoint = _INPOINT (child); if (!decrease) return inpoint + external_time; if (external_time > inpoint) { GST_INFO_OBJECT (clip, "Cannot convert the timeline time %" GST_TIME_FORMAT " to an internal time of the child %" GES_FORMAT " because it would be before the element has any " "internal content", GST_TIME_ARGS (timeline_time), GES_ARGS (child)); g_set_error (error, GES_ERROR, GES_ERROR_NEGATIVE_TIME, "The timeline time %" GST_TIME_FORMAT " would correspond to " "a negative in-point of -%" GST_TIME_FORMAT " for the child " "\"%s\" under clip \"%s\"", GST_TIME_ARGS (timeline_time), GST_TIME_ARGS (external_time - inpoint), GES_TIMELINE_ELEMENT_NAME (child), GES_TIMELINE_ELEMENT_NAME (clip)); return GST_CLOCK_TIME_NONE; } return inpoint - external_time; } static GstClockTime _convert_core_time (GESClip * clip, GstClockTime time, gboolean to_timeline, gboolean * no_core, GError ** error) { GList *tmp; GstClockTime converted = GST_CLOCK_TIME_NONE; GstClockTime half_frame; GESTimeline *timeline = GES_TIMELINE_ELEMENT_TIMELINE (clip); GESClipAsset *asset = GES_CLIP_ASSET (ges_extractable_get_asset (GES_EXTRACTABLE (clip))); if (no_core) *no_core = TRUE; if (to_timeline) half_frame = timeline ? ges_timeline_get_frame_time (timeline, 1) : 0; else half_frame = ges_clip_asset_get_frame_time (asset, 1); half_frame = GST_CLOCK_TIME_IS_VALID (half_frame) ? half_frame / 2 : 0; for (tmp = GES_CONTAINER_CHILDREN (clip); tmp; tmp = tmp->next) { GESTrackElement *child = tmp->data; GESTrack *track = ges_track_element_get_track (child); if (_IS_CORE_CHILD (child) && track && ges_track_element_is_active (child) && ges_track_element_has_internal_source (child)) { GstClockTime tmp_time; GError *convert_error = NULL; if (no_core) *no_core = FALSE; if (to_timeline) tmp_time = ges_clip_get_timeline_time_from_internal_time (clip, child, time, &convert_error); else tmp_time = ges_clip_get_internal_time_from_timeline_time (clip, child, time, &convert_error); if (!GST_CLOCK_TIME_IS_VALID (converted)) { converted = tmp_time; } else if (!GST_CLOCK_TIME_IS_VALID (tmp_time)) { GST_WARNING_OBJECT (clip, "The calculated %s time for %s time %" GST_TIME_FORMAT " using core child %" GES_FORMAT " is not " "defined, but it had a definite value of %" GST_TIME_FORMAT " for another core child", to_timeline ? "timeline" : "internal", to_timeline ? "internal" : "timeline", GST_TIME_ARGS (time), GES_ARGS (child), GST_TIME_ARGS (converted)); } else if (tmp_time != converted) { GstClockTime diff = (tmp_time > converted) ? tmp_time - converted : converted - tmp_time; if (diff > half_frame) { GST_WARNING_OBJECT (clip, "The calculated %s time for %s time %" GST_TIME_FORMAT " using core child %" GES_FORMAT " is %" GST_TIME_FORMAT ", which is different from the value of %" GST_TIME_FORMAT " calculated using a different core child", to_timeline ? "timeline" : "internal", to_timeline ? "internal" : "timeline", GST_TIME_ARGS (time), GES_ARGS (child), GST_TIME_ARGS (tmp_time), GST_TIME_ARGS (converted)); } /* prefer result from video tracks */ if (GES_IS_VIDEO_TRACK (track)) converted = tmp_time; } if (convert_error) { if (error) { g_clear_error (error); *error = convert_error; } else { g_error_free (convert_error); } } } } return converted; } GstClockTime ges_clip_get_core_internal_time_from_timeline_time (GESClip * clip, GstClockTime timeline_time, gboolean * no_core, GError ** error) { return _convert_core_time (clip, timeline_time, FALSE, no_core, error); } /** * ges_clip_get_timeline_time_from_source_frame: * @clip: A #GESClip * @frame_number: The frame number to get the corresponding timestamp of * in the timeline coordinates * @error: (nullable): Return location for an error * * Convert the source frame number to a timeline time. This acts the same * as ges_clip_get_timeline_time_from_internal_time() using the core * children of the clip and using the frame number to specify the internal * position, rather than a timestamp. * * The returned timeline time can be used to seek or edit to a specific * frame. * * Note that you can get the frame timestamp of a particular clip asset * with ges_clip_asset_get_frame_time(). * * Returns: The timestamp corresponding to @frame_number in the core * children of @clip, in the timeline coordinates, or #GST_CLOCK_TIME_NONE * if the conversion could not be performed. * Since: 1.18 */ GstClockTime ges_clip_get_timeline_time_from_source_frame (GESClip * clip, GESFrameNumber frame_number, GError ** error) { GstClockTime timeline_time = GST_CLOCK_TIME_NONE; GstClockTime frame_ts; GESClipAsset *asset; g_return_val_if_fail (GES_IS_CLIP (clip), GST_CLOCK_TIME_NONE); g_return_val_if_fail (!error || !*error, GST_CLOCK_TIME_NONE); if (!GES_FRAME_NUMBER_IS_VALID (frame_number)) return GST_CLOCK_TIME_NONE; asset = GES_CLIP_ASSET (ges_extractable_get_asset (GES_EXTRACTABLE (clip))); frame_ts = ges_clip_asset_get_frame_time (asset, frame_number); if (!GST_CLOCK_TIME_IS_VALID (frame_ts)) return GST_CLOCK_TIME_NONE; timeline_time = _convert_core_time (clip, frame_ts, TRUE, NULL, error); if (error && *error) { g_clear_error (error); g_set_error (error, GES_ERROR, GES_ERROR_INVALID_FRAME_NUMBER, "Requested frame %" G_GINT64_FORMAT " would be outside the " "timeline.", frame_number); } return timeline_time; } /** * ges_clip_add_child_to_track: * @clip: A #GESClip * @child: A child of @clip * @track: The track to add @child to * @error: (optional) (nullable): Return location for an error * * Adds the track element child of the clip to a specific track. * * If the given child is already in another track, this will create a copy * of the child, add it to the clip, and add this copy to the track. * * You should only call this whilst a clip is part of a #GESTimeline, and * for tracks that are in the same timeline. * * This method is an alternative to using the * #GESTimeline::select-tracks-for-object signal, but can be used to * complement it when, say, you wish to copy a clip's children from one * track into a new one. * * When the child is a core child, it must be added to a track that does * not already contain another core child of the same clip. If it is not a * core child (an additional effect), then it must be added to a track * that already contains one of the core children of the same clip. * * This method can also fail if the adding the track element to the track * would break a configuration rule of the corresponding #GESTimeline, * such as causing three sources to overlap at a single time, or causing * a source to completely overlap another in the same track. * * Returns: (transfer none): The element that was added to @track, either * @child or a copy of child, or %NULL if the element could not be added. * * Since: 1.18 */ GESTrackElement * ges_clip_add_child_to_track (GESClip * clip, GESTrackElement * child, GESTrack * track, GError ** error) { GESTimeline *timeline; GESTrackElement *el; GESTrack *current_track; g_return_val_if_fail (GES_IS_CLIP (clip), NULL); g_return_val_if_fail (GES_IS_TRACK_ELEMENT (child), NULL); g_return_val_if_fail (GES_IS_TRACK (track), NULL); g_return_val_if_fail (!error || !*error, NULL); timeline = GES_TIMELINE_ELEMENT_TIMELINE (clip); if (!g_list_find (GES_CONTAINER_CHILDREN (clip), child)) { GST_WARNING_OBJECT (clip, "The track element %" GES_FORMAT " is not " "a child of the clip", GES_ARGS (child)); return NULL; } if (!timeline) { GST_WARNING_OBJECT (clip, "Cannot add children to tracks unless " "the clip is part of a timeline"); return NULL; } if (timeline != ges_track_get_timeline (track)) { GST_WARNING_OBJECT (clip, "Cannot add the children to the track %" GST_PTR_FORMAT " because its timeline is %" GST_PTR_FORMAT " rather than that of the clip %" GST_PTR_FORMAT, track, ges_track_get_timeline (track), timeline); return NULL; } current_track = ges_track_element_get_track (child); if (current_track == track) { GST_WARNING_OBJECT (clip, "Child %s" GES_FORMAT " is already in the " "track %" GST_PTR_FORMAT, GES_ARGS (child), track); return NULL; } /* copy if the element is already in a track */ if (current_track) { /* TODO: rather than add the effect at the next highest priority, we * want to add copied effect into the same EffectCollection, which all * share the same priority/index */ if (_IS_TOP_EFFECT (child)) { clip->priv->use_effect_priority = TRUE; /* add at next lowest priority */ clip->priv->effect_priority = GES_TIMELINE_ELEMENT_PRIORITY (child) + 1; } el = ges_clip_copy_track_element_into (clip, child, GST_CLOCK_TIME_NONE); clip->priv->use_effect_priority = FALSE; if (!el) { GST_ERROR_OBJECT (clip, "Could not add a copy of the track element %" GES_FORMAT " to the clip so cannot add it to the track %" GST_PTR_FORMAT, GES_ARGS (child), track); return NULL; } } else { el = child; } if (!ges_track_add_element_full (track, el, error)) { GST_INFO_OBJECT (clip, "Could not add the track element %" GES_FORMAT " to the track %" GST_PTR_FORMAT, GES_ARGS (el), track); if (el != child) ges_container_remove (GES_CONTAINER (clip), GES_TIMELINE_ELEMENT (el)); return NULL; } /* call _child_track_changed now so that the "active" status of the * child can change. Note that this is needed because this method may * be called during ges_container_add, in which case "notify" for el * will be frozen. Thus, _update_active_for_track may not have been * called yet. It is important for us to call this now because when * the elements are un-frozen, we need to ensure the "active" status * is already set before the duration-limit is calculated */ _update_active_for_track (clip, el); return el; }