/* GStreamer * Copyright (C) <1999> Erik Walthinsen * Copyright (C) 2005-2012 David Schleef * Copyright (C) <2019> Seungha Yang * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Library General Public * License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Library General Public License for more details. * * You should have received a copy of the GNU Library General Public * License along with this library; if not, write to the * Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, * Boston, MA 02110-1301, USA. */ /** * SECTION:element-cudascale * @title: cudascale * @see_also: cudaconvert * * This element resizes video frames. By default the element will try to * negotiate to the same size on the source and sinkpad so that no scaling * is needed. It is therefore safe to insert this element in a pipeline to * get more robust behaviour without any cost if no scaling is needed. * * This element supports some YUV formats which are are also supported by * nvidia encoders and decoders. * * ## Example pipelines * |[ * gst-launch-1.0 -v filesrc location=videotestsrc.mp4 ! qtdemux ! h264parse ! nvh264dec ! cudaconvert ! cudascale ! cudaconvert ! cudadownload ! autovideosink * ]| * Decode a mp4/h264 and display the video. If the video sink chosen * cannot perform scaling, the video scaling will be performed by cudascale * |[ * gst-launch-1.0 -v filesrc location=videotestsrc.mp4 ! qtdemux ! h264parse ! nvh264dec ! cudaconvert ! cudascale ! cudaconvert ! cudadownload ! video/x-raw,width=100 ! autovideosink * ]| * Decode an mp4/h264 and display the video with a width of 100. * * Since: 1.20 */ #ifdef HAVE_CONFIG_H # include #endif #include #include "gstcudascale.h" GST_DEBUG_CATEGORY_STATIC (gst_cuda_scale_debug); #define GST_CAT_DEFAULT gst_cuda_scale_debug #define gst_cuda_scale_parent_class parent_class G_DEFINE_TYPE (GstCudaScale, gst_cuda_scale, GST_TYPE_CUDA_BASE_FILTER); static GstCaps *gst_cuda_scale_transform_caps (GstBaseTransform * trans, GstPadDirection direction, GstCaps * caps, GstCaps * filter); static GstCaps *gst_cuda_scale_fixate_caps (GstBaseTransform * base, GstPadDirection direction, GstCaps * caps, GstCaps * othercaps); static gboolean gst_cuda_scale_set_info (GstCudaBaseTransform * filter, GstCaps * incaps, GstVideoInfo * in_info, GstCaps * outcaps, GstVideoInfo * out_info); static void gst_cuda_scale_class_init (GstCudaScaleClass * klass) { GstElementClass *element_class = GST_ELEMENT_CLASS (klass); GstBaseTransformClass *trans_class = GST_BASE_TRANSFORM_CLASS (klass); GstCudaBaseTransformClass *btrans_class = GST_CUDA_BASE_TRANSFORM_CLASS (klass); gst_element_class_set_static_metadata (element_class, "CUDA Video scaler", "Filter/Converter/Video/Scaler/Hardware", "Resizes Video using CUDA", "Seungha Yang "); trans_class->transform_caps = GST_DEBUG_FUNCPTR (gst_cuda_scale_transform_caps); trans_class->fixate_caps = GST_DEBUG_FUNCPTR (gst_cuda_scale_fixate_caps); btrans_class->set_info = GST_DEBUG_FUNCPTR (gst_cuda_scale_set_info); GST_DEBUG_CATEGORY_INIT (gst_cuda_scale_debug, "cudascale", 0, "Video Resize using CUDA"); } static void gst_cuda_scale_init (GstCudaScale * cuda) { } static GstCaps * gst_cuda_scale_transform_caps (GstBaseTransform * trans, GstPadDirection direction, GstCaps * caps, GstCaps * filter) { GstCaps *ret; GstStructure *structure; GstCapsFeatures *features; gint i, n; GST_DEBUG_OBJECT (trans, "Transforming caps %" GST_PTR_FORMAT " in direction %s", caps, (direction == GST_PAD_SINK) ? "sink" : "src"); ret = gst_caps_new_empty (); n = gst_caps_get_size (caps); for (i = 0; i < n; i++) { structure = gst_caps_get_structure (caps, i); features = gst_caps_get_features (caps, i); /* If this is already expressed by the existing caps * skip this structure */ if (i > 0 && gst_caps_is_subset_structure_full (ret, structure, features)) continue; /* make copy */ structure = gst_structure_copy (structure); gst_structure_set (structure, "width", GST_TYPE_INT_RANGE, 1, G_MAXINT, "height", GST_TYPE_INT_RANGE, 1, G_MAXINT, NULL); /* if pixel aspect ratio, make a range of it */ if (gst_structure_has_field (structure, "pixel-aspect-ratio")) { gst_structure_set (structure, "pixel-aspect-ratio", GST_TYPE_FRACTION_RANGE, 1, G_MAXINT, G_MAXINT, 1, NULL); } gst_caps_append_structure_full (ret, structure, gst_caps_features_copy (features)); } if (filter) { GstCaps *intersection; intersection = gst_caps_intersect_full (filter, ret, GST_CAPS_INTERSECT_FIRST); gst_caps_unref (ret); ret = intersection; } GST_DEBUG_OBJECT (trans, "returning caps: %" GST_PTR_FORMAT, ret); return ret; } /* fork of gstvideoscale */ static GstCaps * gst_cuda_scale_fixate_caps (GstBaseTransform * base, GstPadDirection direction, GstCaps * caps, GstCaps * othercaps) { GstStructure *ins, *outs; const GValue *from_par, *to_par; GValue fpar = G_VALUE_INIT; GValue tpar = G_VALUE_INIT; othercaps = gst_caps_truncate (othercaps); othercaps = gst_caps_make_writable (othercaps); GST_DEBUG_OBJECT (base, "trying to fixate othercaps %" GST_PTR_FORMAT " based on caps %" GST_PTR_FORMAT, othercaps, caps); ins = gst_caps_get_structure (caps, 0); outs = gst_caps_get_structure (othercaps, 0); from_par = gst_structure_get_value (ins, "pixel-aspect-ratio"); to_par = gst_structure_get_value (outs, "pixel-aspect-ratio"); /* If we're fixating from the sinkpad we always set the PAR and * assume that missing PAR on the sinkpad means 1/1 and * missing PAR on the srcpad means undefined */ if (direction == GST_PAD_SINK) { if (!from_par) { g_value_init (&fpar, GST_TYPE_FRACTION); gst_value_set_fraction (&fpar, 1, 1); from_par = &fpar; } if (!to_par) { g_value_init (&tpar, GST_TYPE_FRACTION_RANGE); gst_value_set_fraction_range_full (&tpar, 1, G_MAXINT, G_MAXINT, 1); to_par = &tpar; } } else { if (!to_par) { g_value_init (&tpar, GST_TYPE_FRACTION); gst_value_set_fraction (&tpar, 1, 1); to_par = &tpar; gst_structure_set (outs, "pixel-aspect-ratio", GST_TYPE_FRACTION, 1, 1, NULL); } if (!from_par) { g_value_init (&fpar, GST_TYPE_FRACTION); gst_value_set_fraction (&fpar, 1, 1); from_par = &fpar; } } /* we have both PAR but they might not be fixated */ { gint from_w, from_h, from_par_n, from_par_d, to_par_n, to_par_d; gint w = 0, h = 0; gint from_dar_n, from_dar_d; gint num, den; /* from_par should be fixed */ g_return_val_if_fail (gst_value_is_fixed (from_par), othercaps); from_par_n = gst_value_get_fraction_numerator (from_par); from_par_d = gst_value_get_fraction_denominator (from_par); gst_structure_get_int (ins, "width", &from_w); gst_structure_get_int (ins, "height", &from_h); gst_structure_get_int (outs, "width", &w); gst_structure_get_int (outs, "height", &h); /* if both width and height are already fixed, we can't do anything * about it anymore */ if (w && h) { guint n, d; GST_DEBUG_OBJECT (base, "dimensions already set to %dx%d, not fixating", w, h); if (!gst_value_is_fixed (to_par)) { if (gst_video_calculate_display_ratio (&n, &d, from_w, from_h, from_par_n, from_par_d, w, h)) { GST_DEBUG_OBJECT (base, "fixating to_par to %dx%d", n, d); if (gst_structure_has_field (outs, "pixel-aspect-ratio")) gst_structure_fixate_field_nearest_fraction (outs, "pixel-aspect-ratio", n, d); else if (n != d) gst_structure_set (outs, "pixel-aspect-ratio", GST_TYPE_FRACTION, n, d, NULL); } } goto done; } /* Calculate input DAR */ if (!gst_util_fraction_multiply (from_w, from_h, from_par_n, from_par_d, &from_dar_n, &from_dar_d)) { GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL), ("Error calculating the output scaled size - integer overflow")); goto done; } GST_DEBUG_OBJECT (base, "Input DAR is %d/%d", from_dar_n, from_dar_d); /* If either width or height are fixed there's not much we * can do either except choosing a height or width and PAR * that matches the DAR as good as possible */ if (h) { GstStructure *tmp; gint set_w, set_par_n, set_par_d; GST_DEBUG_OBJECT (base, "height is fixed (%d)", h); /* If the PAR is fixed too, there's not much to do * except choosing the width that is nearest to the * width with the same DAR */ if (gst_value_is_fixed (to_par)) { to_par_n = gst_value_get_fraction_numerator (to_par); to_par_d = gst_value_get_fraction_denominator (to_par); GST_DEBUG_OBJECT (base, "PAR is fixed %d/%d", to_par_n, to_par_d); if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, to_par_d, to_par_n, &num, &den)) { GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL), ("Error calculating the output scaled size - integer overflow")); goto done; } w = (guint) gst_util_uint64_scale_int_round (h, num, den); gst_structure_fixate_field_nearest_int (outs, "width", w); goto done; } /* The PAR is not fixed and it's quite likely that we can set * an arbitrary PAR. */ /* Check if we can keep the input width */ tmp = gst_structure_copy (outs); gst_structure_fixate_field_nearest_int (tmp, "width", from_w); gst_structure_get_int (tmp, "width", &set_w); /* Might have failed but try to keep the DAR nonetheless by * adjusting the PAR */ if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, h, set_w, &to_par_n, &to_par_d)) { GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL), ("Error calculating the output scaled size - integer overflow")); gst_structure_free (tmp); goto done; } if (!gst_structure_has_field (tmp, "pixel-aspect-ratio")) gst_structure_set_value (tmp, "pixel-aspect-ratio", to_par); gst_structure_fixate_field_nearest_fraction (tmp, "pixel-aspect-ratio", to_par_n, to_par_d); gst_structure_get_fraction (tmp, "pixel-aspect-ratio", &set_par_n, &set_par_d); gst_structure_free (tmp); /* Check if the adjusted PAR is accepted */ if (set_par_n == to_par_n && set_par_d == to_par_d) { if (gst_structure_has_field (outs, "pixel-aspect-ratio") || set_par_n != set_par_d) gst_structure_set (outs, "width", G_TYPE_INT, set_w, "pixel-aspect-ratio", GST_TYPE_FRACTION, set_par_n, set_par_d, NULL); goto done; } /* Otherwise scale the width to the new PAR and check if the * adjusted with is accepted. If all that fails we can't keep * the DAR */ if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, set_par_d, set_par_n, &num, &den)) { GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL), ("Error calculating the output scaled size - integer overflow")); goto done; } w = (guint) gst_util_uint64_scale_int_round (h, num, den); gst_structure_fixate_field_nearest_int (outs, "width", w); if (gst_structure_has_field (outs, "pixel-aspect-ratio") || set_par_n != set_par_d) gst_structure_set (outs, "pixel-aspect-ratio", GST_TYPE_FRACTION, set_par_n, set_par_d, NULL); goto done; } else if (w) { GstStructure *tmp; gint set_h, set_par_n, set_par_d; GST_DEBUG_OBJECT (base, "width is fixed (%d)", w); /* If the PAR is fixed too, there's not much to do * except choosing the height that is nearest to the * height with the same DAR */ if (gst_value_is_fixed (to_par)) { to_par_n = gst_value_get_fraction_numerator (to_par); to_par_d = gst_value_get_fraction_denominator (to_par); GST_DEBUG_OBJECT (base, "PAR is fixed %d/%d", to_par_n, to_par_d); if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, to_par_d, to_par_n, &num, &den)) { GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL), ("Error calculating the output scaled size - integer overflow")); goto done; } h = (guint) gst_util_uint64_scale_int_round (w, den, num); gst_structure_fixate_field_nearest_int (outs, "height", h); goto done; } /* The PAR is not fixed and it's quite likely that we can set * an arbitrary PAR. */ /* Check if we can keep the input height */ tmp = gst_structure_copy (outs); gst_structure_fixate_field_nearest_int (tmp, "height", from_h); gst_structure_get_int (tmp, "height", &set_h); /* Might have failed but try to keep the DAR nonetheless by * adjusting the PAR */ if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, set_h, w, &to_par_n, &to_par_d)) { GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL), ("Error calculating the output scaled size - integer overflow")); gst_structure_free (tmp); goto done; } if (!gst_structure_has_field (tmp, "pixel-aspect-ratio")) gst_structure_set_value (tmp, "pixel-aspect-ratio", to_par); gst_structure_fixate_field_nearest_fraction (tmp, "pixel-aspect-ratio", to_par_n, to_par_d); gst_structure_get_fraction (tmp, "pixel-aspect-ratio", &set_par_n, &set_par_d); gst_structure_free (tmp); /* Check if the adjusted PAR is accepted */ if (set_par_n == to_par_n && set_par_d == to_par_d) { if (gst_structure_has_field (outs, "pixel-aspect-ratio") || set_par_n != set_par_d) gst_structure_set (outs, "height", G_TYPE_INT, set_h, "pixel-aspect-ratio", GST_TYPE_FRACTION, set_par_n, set_par_d, NULL); goto done; } /* Otherwise scale the height to the new PAR and check if the * adjusted with is accepted. If all that fails we can't keep * the DAR */ if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, set_par_d, set_par_n, &num, &den)) { GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL), ("Error calculating the output scaled size - integer overflow")); goto done; } h = (guint) gst_util_uint64_scale_int_round (w, den, num); gst_structure_fixate_field_nearest_int (outs, "height", h); if (gst_structure_has_field (outs, "pixel-aspect-ratio") || set_par_n != set_par_d) gst_structure_set (outs, "pixel-aspect-ratio", GST_TYPE_FRACTION, set_par_n, set_par_d, NULL); goto done; } else if (gst_value_is_fixed (to_par)) { GstStructure *tmp; gint set_h, set_w, f_h, f_w; to_par_n = gst_value_get_fraction_numerator (to_par); to_par_d = gst_value_get_fraction_denominator (to_par); /* Calculate scale factor for the PAR change */ if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, to_par_n, to_par_d, &num, &den)) { GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL), ("Error calculating the output scaled size - integer overflow")); goto done; } /* Try to keep the input height (because of interlacing) */ tmp = gst_structure_copy (outs); gst_structure_fixate_field_nearest_int (tmp, "height", from_h); gst_structure_get_int (tmp, "height", &set_h); /* This might have failed but try to scale the width * to keep the DAR nonetheless */ w = (guint) gst_util_uint64_scale_int_round (set_h, num, den); gst_structure_fixate_field_nearest_int (tmp, "width", w); gst_structure_get_int (tmp, "width", &set_w); gst_structure_free (tmp); /* We kept the DAR and the height is nearest to the original height */ if (set_w == w) { gst_structure_set (outs, "width", G_TYPE_INT, set_w, "height", G_TYPE_INT, set_h, NULL); goto done; } f_h = set_h; f_w = set_w; /* If the former failed, try to keep the input width at least */ tmp = gst_structure_copy (outs); gst_structure_fixate_field_nearest_int (tmp, "width", from_w); gst_structure_get_int (tmp, "width", &set_w); /* This might have failed but try to scale the width * to keep the DAR nonetheless */ h = (guint) gst_util_uint64_scale_int_round (set_w, den, num); gst_structure_fixate_field_nearest_int (tmp, "height", h); gst_structure_get_int (tmp, "height", &set_h); gst_structure_free (tmp); /* We kept the DAR and the width is nearest to the original width */ if (set_h == h) { gst_structure_set (outs, "width", G_TYPE_INT, set_w, "height", G_TYPE_INT, set_h, NULL); goto done; } /* If all this failed, keep the dimensions with the DAR that was closest * to the correct DAR. This changes the DAR but there's not much else to * do here. */ if (set_w * ABS (set_h - h) < ABS (f_w - w) * f_h) { f_h = set_h; f_w = set_w; } gst_structure_set (outs, "width", G_TYPE_INT, f_w, "height", G_TYPE_INT, f_h, NULL); goto done; } else { GstStructure *tmp; gint set_h, set_w, set_par_n, set_par_d, tmp2; /* width, height and PAR are not fixed but passthrough is not possible */ /* First try to keep the height and width as good as possible * and scale PAR */ tmp = gst_structure_copy (outs); gst_structure_fixate_field_nearest_int (tmp, "height", from_h); gst_structure_get_int (tmp, "height", &set_h); gst_structure_fixate_field_nearest_int (tmp, "width", from_w); gst_structure_get_int (tmp, "width", &set_w); if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, set_h, set_w, &to_par_n, &to_par_d)) { GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL), ("Error calculating the output scaled size - integer overflow")); gst_structure_free (tmp); goto done; } if (!gst_structure_has_field (tmp, "pixel-aspect-ratio")) gst_structure_set_value (tmp, "pixel-aspect-ratio", to_par); gst_structure_fixate_field_nearest_fraction (tmp, "pixel-aspect-ratio", to_par_n, to_par_d); gst_structure_get_fraction (tmp, "pixel-aspect-ratio", &set_par_n, &set_par_d); gst_structure_free (tmp); if (set_par_n == to_par_n && set_par_d == to_par_d) { gst_structure_set (outs, "width", G_TYPE_INT, set_w, "height", G_TYPE_INT, set_h, NULL); if (gst_structure_has_field (outs, "pixel-aspect-ratio") || set_par_n != set_par_d) gst_structure_set (outs, "pixel-aspect-ratio", GST_TYPE_FRACTION, set_par_n, set_par_d, NULL); goto done; } /* Otherwise try to scale width to keep the DAR with the set * PAR and height */ if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, set_par_d, set_par_n, &num, &den)) { GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL), ("Error calculating the output scaled size - integer overflow")); goto done; } w = (guint) gst_util_uint64_scale_int_round (set_h, num, den); tmp = gst_structure_copy (outs); gst_structure_fixate_field_nearest_int (tmp, "width", w); gst_structure_get_int (tmp, "width", &tmp2); gst_structure_free (tmp); if (tmp2 == w) { gst_structure_set (outs, "width", G_TYPE_INT, tmp2, "height", G_TYPE_INT, set_h, NULL); if (gst_structure_has_field (outs, "pixel-aspect-ratio") || set_par_n != set_par_d) gst_structure_set (outs, "pixel-aspect-ratio", GST_TYPE_FRACTION, set_par_n, set_par_d, NULL); goto done; } /* ... or try the same with the height */ h = (guint) gst_util_uint64_scale_int_round (set_w, den, num); tmp = gst_structure_copy (outs); gst_structure_fixate_field_nearest_int (tmp, "height", h); gst_structure_get_int (tmp, "height", &tmp2); gst_structure_free (tmp); if (tmp2 == h) { gst_structure_set (outs, "width", G_TYPE_INT, set_w, "height", G_TYPE_INT, tmp2, NULL); if (gst_structure_has_field (outs, "pixel-aspect-ratio") || set_par_n != set_par_d) gst_structure_set (outs, "pixel-aspect-ratio", GST_TYPE_FRACTION, set_par_n, set_par_d, NULL); goto done; } /* If all fails we can't keep the DAR and take the nearest values * for everything from the first try */ gst_structure_set (outs, "width", G_TYPE_INT, set_w, "height", G_TYPE_INT, set_h, NULL); if (gst_structure_has_field (outs, "pixel-aspect-ratio") || set_par_n != set_par_d) gst_structure_set (outs, "pixel-aspect-ratio", GST_TYPE_FRACTION, set_par_n, set_par_d, NULL); } } done: GST_DEBUG_OBJECT (base, "fixated othercaps to %" GST_PTR_FORMAT, othercaps); if (from_par == &fpar) g_value_unset (&fpar); if (to_par == &tpar) g_value_unset (&tpar); return othercaps; } static gboolean gst_cuda_scale_set_info (GstCudaBaseTransform * btrans, GstCaps * incaps, GstVideoInfo * in_info, GstCaps * outcaps, GstVideoInfo * out_info) { if (GST_VIDEO_INFO_WIDTH (in_info) == GST_VIDEO_INFO_WIDTH (out_info) && GST_VIDEO_INFO_HEIGHT (in_info) == GST_VIDEO_INFO_HEIGHT (out_info) && GST_VIDEO_INFO_FORMAT (in_info) == GST_VIDEO_INFO_FORMAT (out_info)) { gst_base_transform_set_passthrough (GST_BASE_TRANSFORM (btrans), TRUE); } return GST_CUDA_BASE_TRANSFORM_CLASS (parent_class)->set_info (btrans, incaps, in_info, outcaps, out_info); }