/* GStreamer * Copyright (C) <1999> Erik Walthinsen <omega@cse.ogi.edu> * Copyright (C) <2004> Thomas Vander Stichele <thomas at apestaart dot org> * Copyright (C) 2006 Wim Taymans <wim at fluendo dot com> * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Library General Public * License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Library General Public License for more details. * * You should have received a copy of the GNU Library General Public * License along with this library; if not, write to the * Free Software Foundation, Inc., 59 Temple Place - Suite 330, * Boston, MA 02111-1307, USA. */ /** * SECTION:element-multifdsink * @see_also: tcpserversink * * This plugin writes incoming data to a set of file descriptors. The * file descriptors can be added to multifdsink by emitting the #GstMultiFdSink::add signal. * For each descriptor added, the #GstMultiFdSink::client-added signal will be called. * * As of version 0.10.8, a client can also be added with the #GstMultiFdSink::add-full signal * that allows for more control over what and how much data a client * initially receives. * * Clients can be removed from multifdsink by emitting the #GstMultiFdSink::remove signal. For * each descriptor removed, the #GstMultiFdSink::client-removed signal will be called. The * #GstMultiFdSink::client-removed signal can also be fired when multifdsink decides that a * client is not active anymore or, depending on the value of the * #GstMultiFdSink:recover-policy property, if the client is reading too slowly. * In all cases, multifdsink will never close a file descriptor itself. * The user of multifdsink is responsible for closing all file descriptors. * This can for example be done in response to the #GstMultiFdSink::client-fd-removed signal. * Note that multifdsink still has a reference to the file descriptor when the * #GstMultiFdSink::client-removed signal is emitted, so that "get-stats" can be performed on * the descriptor; it is therefore not safe to close the file descriptor in * the #GstMultiFdSink::client-removed signal handler, and you should use the * #GstMultiFdSink::client-fd-removed signal to safely close the fd. * * Multifdsink internally keeps a queue of the incoming buffers and uses a * separate thread to send the buffers to the clients. This ensures that no * client write can block the pipeline and that clients can read with different * speeds. * * When adding a client to multifdsink, the #GstMultiFdSink:sync-method property will define * which buffer in the queued buffers will be sent first to the client. Clients * can be sent the most recent buffer (which might not be decodable by the * client if it is not a keyframe), the next keyframe received in * multifdsink (which can take some time depending on the keyframe rate), or the * last received keyframe (which will cause a simple burst-on-connect). * Multifdsink will always keep at least one keyframe in its internal buffers * when the sync-mode is set to latest-keyframe. * * As of version 0.10.8, there are additional values for the #GstMultiFdSink:sync-method * property to allow finer control over burst-on-connect behaviour. By selecting * the 'burst' method a minimum burst size can be chosen, 'burst-keyframe' * additionally requires that the burst begin with a keyframe, and * 'burst-with-keyframe' attempts to burst beginning with a keyframe, but will * prefer a minimum burst size even if it requires not starting with a keyframe. * * Multifdsink can be instructed to keep at least a minimum amount of data * expressed in time or byte units in its internal queues with the * #GstMultiFdSink:time-min and #GstMultiFdSink:bytes-min properties respectively. * These properties are useful if the application adds clients with the * #GstMultiFdSink::add-full signal to make sure that a burst connect can * actually be honored. * * When streaming data, clients are allowed to read at a different rate than * the rate at which multifdsink receives data. If the client is reading too * fast, no data will be send to the client until multifdsink receives more * data. If the client, however, reads too slowly, data for that client will be * queued up in multifdsink. Two properties control the amount of data * (buffers) that is queued in multifdsink: #GstMultiFdSink:buffers-max and * #GstMultiFdSink:buffers-soft-max. A client that falls behind by * #GstMultiFdSink:buffers-max is removed from multifdsink forcibly. * * A client with a lag of at least #GstMultiFdSink:buffers-soft-max enters the recovery * procedure which is controlled with the #GstMultiFdSink:recover-policy property. * A recover policy of NONE will do nothing, RESYNC_LATEST will send the most recently * received buffer as the next buffer for the client, RESYNC_SOFT_LIMIT * positions the client to the soft limit in the buffer queue and * RESYNC_KEYFRAME positions the client at the most recent keyframe in the * buffer queue. * * multifdsink will by default synchronize on the clock before serving the * buffers to the clients. This behaviour can be disabled by setting the sync * property to FALSE. Multifdsink will by default not do QoS and will never * drop late buffers. * * Last reviewed on 2006-09-12 (0.10.10) */ #ifdef HAVE_CONFIG_H #include "config.h" #endif /* FIXME 0.11: suppress warnings for deprecated API such as GStaticRecMutex * with newer GLib versions (>= 2.31.0) */ #define GLIB_DISABLE_DEPRECATION_WARNINGS #include <gst/gst-i18n-plugin.h> #include <sys/ioctl.h> #ifdef HAVE_UNISTD_H #include <unistd.h> #endif #include <fcntl.h> #include <sys/types.h> #include <sys/socket.h> #include <sys/stat.h> #include <netinet/in.h> #ifdef HAVE_FIONREAD_IN_SYS_FILIO #include <sys/filio.h> #endif #include "gstmultifdsink.h" #include "gsttcp-marshal.h" #define NOT_IMPLEMENTED 0 static GstStaticPadTemplate sinktemplate = GST_STATIC_PAD_TEMPLATE ("sink", GST_PAD_SINK, GST_PAD_ALWAYS, GST_STATIC_CAPS_ANY); GST_DEBUG_CATEGORY_STATIC (multifdsink_debug); #define GST_CAT_DEFAULT (multifdsink_debug) /* MultiFdSink signals and args */ enum { /* methods */ SIGNAL_ADD, SIGNAL_ADD_BURST, SIGNAL_REMOVE, SIGNAL_REMOVE_FLUSH, SIGNAL_CLEAR, SIGNAL_GET_STATS, /* signals */ SIGNAL_CLIENT_ADDED, SIGNAL_CLIENT_REMOVED, SIGNAL_CLIENT_FD_REMOVED, LAST_SIGNAL }; /* this is really arbitrarily chosen */ #define DEFAULT_MODE 1 #define DEFAULT_BUFFERS_MAX -1 #define DEFAULT_BUFFERS_SOFT_MAX -1 #define DEFAULT_TIME_MIN -1 #define DEFAULT_BYTES_MIN -1 #define DEFAULT_BUFFERS_MIN -1 #define DEFAULT_UNIT_TYPE GST_TCP_UNIT_TYPE_BUFFERS #define DEFAULT_UNITS_MAX -1 #define DEFAULT_UNITS_SOFT_MAX -1 #define DEFAULT_RECOVER_POLICY GST_RECOVER_POLICY_NONE #define DEFAULT_TIMEOUT 0 #define DEFAULT_SYNC_METHOD GST_SYNC_METHOD_LATEST #define DEFAULT_BURST_UNIT GST_TCP_UNIT_TYPE_UNDEFINED #define DEFAULT_BURST_VALUE 0 #define DEFAULT_QOS_DSCP -1 #define DEFAULT_HANDLE_READ TRUE #define DEFAULT_RESEND_STREAMHEADER TRUE enum { PROP_0, PROP_MODE, PROP_BUFFERS_QUEUED, PROP_BYTES_QUEUED, PROP_TIME_QUEUED, PROP_UNIT_TYPE, PROP_UNITS_MAX, PROP_UNITS_SOFT_MAX, PROP_BUFFERS_MAX, PROP_BUFFERS_SOFT_MAX, PROP_TIME_MIN, PROP_BYTES_MIN, PROP_BUFFERS_MIN, PROP_RECOVER_POLICY, PROP_TIMEOUT, PROP_SYNC_METHOD, PROP_BYTES_TO_SERVE, PROP_BYTES_SERVED, PROP_BURST_UNIT, PROP_BURST_VALUE, PROP_QOS_DSCP, PROP_HANDLE_READ, PROP_RESEND_STREAMHEADER, PROP_NUM_FDS, PROP_LAST }; /* For backward compat, we can't really select the poll mode anymore with * GstPoll. */ #define GST_TYPE_FDSET_MODE (gst_fdset_mode_get_type()) static GType gst_fdset_mode_get_type (void) { static GType fdset_mode_type = 0; static const GEnumValue fdset_mode[] = { {0, "Select", "select"}, {1, "Poll", "poll"}, {2, "EPoll", "epoll"}, {0, NULL, NULL}, }; if (!fdset_mode_type) { fdset_mode_type = g_enum_register_static ("GstFDSetMode", fdset_mode); } return fdset_mode_type; } #define GST_TYPE_RECOVER_POLICY (gst_recover_policy_get_type()) static GType gst_recover_policy_get_type (void) { static GType recover_policy_type = 0; static const GEnumValue recover_policy[] = { {GST_RECOVER_POLICY_NONE, "Do not try to recover", "none"}, {GST_RECOVER_POLICY_RESYNC_LATEST, "Resync client to latest buffer", "latest"}, {GST_RECOVER_POLICY_RESYNC_SOFT_LIMIT, "Resync client to soft limit", "soft-limit"}, {GST_RECOVER_POLICY_RESYNC_KEYFRAME, "Resync client to most recent keyframe", "keyframe"}, {0, NULL, NULL}, }; if (!recover_policy_type) { recover_policy_type = g_enum_register_static ("GstRecoverPolicy", recover_policy); } return recover_policy_type; } #define GST_TYPE_SYNC_METHOD (gst_sync_method_get_type()) static GType gst_sync_method_get_type (void) { static GType sync_method_type = 0; static const GEnumValue sync_method[] = { {GST_SYNC_METHOD_LATEST, "Serve starting from the latest buffer", "latest"}, {GST_SYNC_METHOD_NEXT_KEYFRAME, "Serve starting from the next keyframe", "next-keyframe"}, {GST_SYNC_METHOD_LATEST_KEYFRAME, "Serve everything since the latest keyframe (burst)", "latest-keyframe"}, {GST_SYNC_METHOD_BURST, "Serve burst-value data to client", "burst"}, {GST_SYNC_METHOD_BURST_KEYFRAME, "Serve burst-value data starting on a keyframe", "burst-keyframe"}, {GST_SYNC_METHOD_BURST_WITH_KEYFRAME, "Serve burst-value data preferably starting on a keyframe", "burst-with-keyframe"}, {0, NULL, NULL}, }; if (!sync_method_type) { sync_method_type = g_enum_register_static ("GstSyncMethod", sync_method); } return sync_method_type; } #define GST_TYPE_UNIT_TYPE (gst_unit_type_get_type()) static GType gst_unit_type_get_type (void) { static GType unit_type_type = 0; static const GEnumValue unit_type[] = { {GST_TCP_UNIT_TYPE_UNDEFINED, "Undefined", "undefined"}, {GST_TCP_UNIT_TYPE_BUFFERS, "Buffers", "buffers"}, {GST_TCP_UNIT_TYPE_BYTES, "Bytes", "bytes"}, {GST_TCP_UNIT_TYPE_TIME, "Time", "time"}, {0, NULL, NULL}, }; if (!unit_type_type) { unit_type_type = g_enum_register_static ("GstTCPUnitType", unit_type); } return unit_type_type; } #define GST_TYPE_CLIENT_STATUS (gst_client_status_get_type()) static GType gst_client_status_get_type (void) { static GType client_status_type = 0; static const GEnumValue client_status[] = { {GST_CLIENT_STATUS_OK, "ok", "ok"}, {GST_CLIENT_STATUS_CLOSED, "Closed", "closed"}, {GST_CLIENT_STATUS_REMOVED, "Removed", "removed"}, {GST_CLIENT_STATUS_SLOW, "Too slow", "slow"}, {GST_CLIENT_STATUS_ERROR, "Error", "error"}, {GST_CLIENT_STATUS_DUPLICATE, "Duplicate", "duplicate"}, {GST_CLIENT_STATUS_FLUSHING, "Flushing", "flushing"}, {0, NULL, NULL}, }; if (!client_status_type) { client_status_type = g_enum_register_static ("GstClientStatus", client_status); } return client_status_type; } static void gst_multi_fd_sink_finalize (GObject * object); static void gst_multi_fd_sink_remove_client_link (GstMultiFdSink * sink, GList * link); static GstFlowReturn gst_multi_fd_sink_render (GstBaseSink * bsink, GstBuffer * buf); static GstStateChangeReturn gst_multi_fd_sink_change_state (GstElement * element, GstStateChange transition); static void gst_multi_fd_sink_set_property (GObject * object, guint prop_id, const GValue * value, GParamSpec * pspec); static void gst_multi_fd_sink_get_property (GObject * object, guint prop_id, GValue * value, GParamSpec * pspec); #define gst_multi_fd_sink_parent_class parent_class G_DEFINE_TYPE (GstMultiFdSink, gst_multi_fd_sink, GST_TYPE_BASE_SINK); static guint gst_multi_fd_sink_signals[LAST_SIGNAL] = { 0 }; static void gst_multi_fd_sink_class_init (GstMultiFdSinkClass * klass) { GObjectClass *gobject_class; GstElementClass *gstelement_class; GstBaseSinkClass *gstbasesink_class; gobject_class = (GObjectClass *) klass; gstelement_class = (GstElementClass *) klass; gstbasesink_class = (GstBaseSinkClass *) klass; gobject_class->set_property = gst_multi_fd_sink_set_property; gobject_class->get_property = gst_multi_fd_sink_get_property; gobject_class->finalize = gst_multi_fd_sink_finalize; /** * GstMultiFdSink::mode * * The mode for selecting activity on the fds. * * This property is deprecated since 0.10.18, if will now automatically * select and use the most optimal method. */ g_object_class_install_property (gobject_class, PROP_MODE, g_param_spec_enum ("mode", "Mode", "The mode for selecting activity on the fds (deprecated)", GST_TYPE_FDSET_MODE, DEFAULT_MODE, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); g_object_class_install_property (gobject_class, PROP_BUFFERS_MAX, g_param_spec_int ("buffers-max", "Buffers max", "max number of buffers to queue for a client (-1 = no limit)", -1, G_MAXINT, DEFAULT_BUFFERS_MAX, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); g_object_class_install_property (gobject_class, PROP_BUFFERS_SOFT_MAX, g_param_spec_int ("buffers-soft-max", "Buffers soft max", "Recover client when going over this limit (-1 = no limit)", -1, G_MAXINT, DEFAULT_BUFFERS_SOFT_MAX, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); g_object_class_install_property (gobject_class, PROP_BYTES_MIN, g_param_spec_int ("bytes-min", "Bytes min", "min number of bytes to queue (-1 = as little as possible)", -1, G_MAXINT, DEFAULT_BYTES_MIN, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); g_object_class_install_property (gobject_class, PROP_TIME_MIN, g_param_spec_int64 ("time-min", "Time min", "min number of time to queue (-1 = as little as possible)", -1, G_MAXINT64, DEFAULT_TIME_MIN, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); g_object_class_install_property (gobject_class, PROP_BUFFERS_MIN, g_param_spec_int ("buffers-min", "Buffers min", "min number of buffers to queue (-1 = as few as possible)", -1, G_MAXINT, DEFAULT_BUFFERS_MIN, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); g_object_class_install_property (gobject_class, PROP_UNIT_TYPE, g_param_spec_enum ("unit-type", "Units type", "The unit to measure the max/soft-max/queued properties", GST_TYPE_UNIT_TYPE, DEFAULT_UNIT_TYPE, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); g_object_class_install_property (gobject_class, PROP_UNITS_MAX, g_param_spec_int64 ("units-max", "Units max", "max number of units to queue (-1 = no limit)", -1, G_MAXINT64, DEFAULT_UNITS_MAX, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); g_object_class_install_property (gobject_class, PROP_UNITS_SOFT_MAX, g_param_spec_int64 ("units-soft-max", "Units soft max", "Recover client when going over this limit (-1 = no limit)", -1, G_MAXINT64, DEFAULT_UNITS_SOFT_MAX, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); g_object_class_install_property (gobject_class, PROP_BUFFERS_QUEUED, g_param_spec_uint ("buffers-queued", "Buffers queued", "Number of buffers currently queued", 0, G_MAXUINT, 0, G_PARAM_READABLE | G_PARAM_STATIC_STRINGS)); #if NOT_IMPLEMENTED g_object_class_install_property (gobject_class, PROP_BYTES_QUEUED, g_param_spec_uint ("bytes-queued", "Bytes queued", "Number of bytes currently queued", 0, G_MAXUINT, 0, G_PARAM_READABLE | G_PARAM_STATIC_STRINGS)); g_object_class_install_property (gobject_class, PROP_TIME_QUEUED, g_param_spec_uint64 ("time-queued", "Time queued", "Number of time currently queued", 0, G_MAXUINT64, 0, G_PARAM_READABLE | G_PARAM_STATIC_STRINGS)); #endif g_object_class_install_property (gobject_class, PROP_RECOVER_POLICY, g_param_spec_enum ("recover-policy", "Recover Policy", "How to recover when client reaches the soft max", GST_TYPE_RECOVER_POLICY, DEFAULT_RECOVER_POLICY, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); g_object_class_install_property (gobject_class, PROP_TIMEOUT, g_param_spec_uint64 ("timeout", "Timeout", "Maximum inactivity timeout in nanoseconds for a client (0 = no limit)", 0, G_MAXUINT64, DEFAULT_TIMEOUT, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); g_object_class_install_property (gobject_class, PROP_SYNC_METHOD, g_param_spec_enum ("sync-method", "Sync Method", "How to sync new clients to the stream", GST_TYPE_SYNC_METHOD, DEFAULT_SYNC_METHOD, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); g_object_class_install_property (gobject_class, PROP_BYTES_TO_SERVE, g_param_spec_uint64 ("bytes-to-serve", "Bytes to serve", "Number of bytes received to serve to clients", 0, G_MAXUINT64, 0, G_PARAM_READABLE | G_PARAM_STATIC_STRINGS)); g_object_class_install_property (gobject_class, PROP_BYTES_SERVED, g_param_spec_uint64 ("bytes-served", "Bytes served", "Total number of bytes send to all clients", 0, G_MAXUINT64, 0, G_PARAM_READABLE | G_PARAM_STATIC_STRINGS)); g_object_class_install_property (gobject_class, PROP_BURST_UNIT, g_param_spec_enum ("burst-unit", "Burst unit", "The format of the burst units (when sync-method is burst[[-with]-keyframe])", GST_TYPE_UNIT_TYPE, DEFAULT_BURST_UNIT, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); g_object_class_install_property (gobject_class, PROP_BURST_VALUE, g_param_spec_uint64 ("burst-value", "Burst value", "The amount of burst expressed in burst-unit", 0, G_MAXUINT64, DEFAULT_BURST_VALUE, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); g_object_class_install_property (gobject_class, PROP_QOS_DSCP, g_param_spec_int ("qos-dscp", "QoS diff srv code point", "Quality of Service, differentiated services code point (-1 default)", -1, 63, DEFAULT_QOS_DSCP, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); /** * GstMultiFdSink::handle-read * * Handle read requests from clients and discard the data. * * Since: 0.10.23 */ g_object_class_install_property (gobject_class, PROP_HANDLE_READ, g_param_spec_boolean ("handle-read", "Handle Read", "Handle client reads and discard the data", DEFAULT_HANDLE_READ, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); /** * GstMultiFdSink::resend-streamheader * * Resend the streamheaders to existing clients when they change. * * Since: 0.10.23 */ g_object_class_install_property (gobject_class, PROP_RESEND_STREAMHEADER, g_param_spec_boolean ("resend-streamheader", "Resend streamheader", "Resend the streamheader if it changes in the caps", DEFAULT_RESEND_STREAMHEADER, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); g_object_class_install_property (gobject_class, PROP_NUM_FDS, g_param_spec_uint ("num-fds", "Number of fds", "The current number of client file descriptors.", 0, G_MAXUINT, 0, G_PARAM_READABLE | G_PARAM_STATIC_STRINGS)); /** * GstMultiFdSink::add: * @gstmultifdsink: the multifdsink element to emit this signal on * @fd: the file descriptor to add to multifdsink * * Hand the given open file descriptor to multifdsink to write to. */ gst_multi_fd_sink_signals[SIGNAL_ADD] = g_signal_new ("add", G_TYPE_FROM_CLASS (klass), G_SIGNAL_RUN_LAST | G_SIGNAL_ACTION, G_STRUCT_OFFSET (GstMultiFdSinkClass, add), NULL, NULL, g_cclosure_marshal_VOID__INT, G_TYPE_NONE, 1, G_TYPE_INT); /** * GstMultiFdSink::add-full: * @gstmultifdsink: the multifdsink element to emit this signal on * @fd: the file descriptor to add to multifdsink * @sync: the sync method to use * @unit_type_min: the unit-type of @value_min * @value_min: the minimum amount of data to burst expressed in * @unit_type_min units. * @unit_type_max: the unit-type of @value_max * @value_max: the maximum amount of data to burst expressed in * @unit_type_max units. * * Hand the given open file descriptor to multifdsink to write to and * specify the burst parameters for the new connection. */ gst_multi_fd_sink_signals[SIGNAL_ADD_BURST] = g_signal_new ("add-full", G_TYPE_FROM_CLASS (klass), G_SIGNAL_RUN_LAST | G_SIGNAL_ACTION, G_STRUCT_OFFSET (GstMultiFdSinkClass, add_full), NULL, NULL, gst_tcp_marshal_VOID__INT_ENUM_INT_UINT64_INT_UINT64, G_TYPE_NONE, 6, G_TYPE_INT, GST_TYPE_SYNC_METHOD, GST_TYPE_UNIT_TYPE, G_TYPE_UINT64, GST_TYPE_UNIT_TYPE, G_TYPE_UINT64); /** * GstMultiFdSink::remove: * @gstmultifdsink: the multifdsink element to emit this signal on * @fd: the file descriptor to remove from multifdsink * * Remove the given open file descriptor from multifdsink. */ gst_multi_fd_sink_signals[SIGNAL_REMOVE] = g_signal_new ("remove", G_TYPE_FROM_CLASS (klass), G_SIGNAL_RUN_LAST | G_SIGNAL_ACTION, G_STRUCT_OFFSET (GstMultiFdSinkClass, remove), NULL, NULL, gst_tcp_marshal_VOID__INT, G_TYPE_NONE, 1, G_TYPE_INT); /** * GstMultiFdSink::remove-flush: * @gstmultifdsink: the multifdsink element to emit this signal on * @fd: the file descriptor to remove from multifdsink * * Remove the given open file descriptor from multifdsink after flushing all * the pending data to the fd. */ gst_multi_fd_sink_signals[SIGNAL_REMOVE_FLUSH] = g_signal_new ("remove-flush", G_TYPE_FROM_CLASS (klass), G_SIGNAL_RUN_LAST | G_SIGNAL_ACTION, G_STRUCT_OFFSET (GstMultiFdSinkClass, remove_flush), NULL, NULL, gst_tcp_marshal_VOID__INT, G_TYPE_NONE, 1, G_TYPE_INT); /** * GstMultiFdSink::clear: * @gstmultifdsink: the multifdsink element to emit this signal on * * Remove all file descriptors from multifdsink. Since multifdsink did not * open fd's itself, it does not explicitly close the fd. The application * should do so by connecting to the client-fd-removed callback. */ gst_multi_fd_sink_signals[SIGNAL_CLEAR] = g_signal_new ("clear", G_TYPE_FROM_CLASS (klass), G_SIGNAL_RUN_LAST | G_SIGNAL_ACTION, G_STRUCT_OFFSET (GstMultiFdSinkClass, clear), NULL, NULL, g_cclosure_marshal_VOID__VOID, G_TYPE_NONE, 0); /** * GstMultiFdSink::get-stats: * @gstmultifdsink: the multifdsink element to emit this signal on * @fd: the file descriptor to get stats of from multifdsink * * Get statistics about @fd. This function returns a GValueArray to ease * automatic wrapping for bindings. * * Returns: a GValueArray with the statistics. The array contains guint64 * values that represent respectively: total number of bytes sent, time * when the client was added, time when the client was * disconnected/removed, time the client is/was active, last activity * time (in epoch seconds), number of buffers dropped. * All times are expressed in nanoseconds (GstClockTime). * The array can be 0-length if the client was not found. */ gst_multi_fd_sink_signals[SIGNAL_GET_STATS] = g_signal_new ("get-stats", G_TYPE_FROM_CLASS (klass), G_SIGNAL_RUN_LAST | G_SIGNAL_ACTION, G_STRUCT_OFFSET (GstMultiFdSinkClass, get_stats), NULL, NULL, gst_tcp_marshal_BOXED__INT, G_TYPE_VALUE_ARRAY, 1, G_TYPE_INT); /** * GstMultiFdSink::client-added: * @gstmultifdsink: the multifdsink element that emitted this signal * @fd: the file descriptor that was added to multifdsink * * The given file descriptor was added to multifdsink. This signal will * be emitted from the streaming thread so application should be prepared * for that. */ gst_multi_fd_sink_signals[SIGNAL_CLIENT_ADDED] = g_signal_new ("client-added", G_TYPE_FROM_CLASS (klass), G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GstMultiFdSinkClass, client_added), NULL, NULL, gst_tcp_marshal_VOID__INT, G_TYPE_NONE, 1, G_TYPE_INT); /** * GstMultiFdSink::client-removed: * @gstmultifdsink: the multifdsink element that emitted this signal * @fd: the file descriptor that is to be removed from multifdsink * @status: the reason why the client was removed * * The given file descriptor is about to be removed from multifdsink. This * signal will be emitted from the streaming thread so applications should * be prepared for that. * * @gstmultifdsink still holds a handle to @fd so it is possible to call * the get-stats signal from this callback. For the same reason it is * not safe to close() and reuse @fd in this callback. */ gst_multi_fd_sink_signals[SIGNAL_CLIENT_REMOVED] = g_signal_new ("client-removed", G_TYPE_FROM_CLASS (klass), G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GstMultiFdSinkClass, client_removed), NULL, NULL, gst_tcp_marshal_VOID__INT_BOXED, G_TYPE_NONE, 2, G_TYPE_INT, GST_TYPE_CLIENT_STATUS); /** * GstMultiFdSink::client-fd-removed: * @gstmultifdsink: the multifdsink element that emitted this signal * @fd: the file descriptor that was removed from multifdsink * * The given file descriptor was removed from multifdsink. This signal will * be emitted from the streaming thread so applications should be prepared * for that. * * In this callback, @gstmultifdsink has removed all the information * associated with @fd and it is therefore not possible to call get-stats * with @fd. It is however safe to close() and reuse @fd in the callback. * * Since: 0.10.7 */ gst_multi_fd_sink_signals[SIGNAL_CLIENT_FD_REMOVED] = g_signal_new ("client-fd-removed", G_TYPE_FROM_CLASS (klass), G_SIGNAL_RUN_LAST, G_STRUCT_OFFSET (GstMultiFdSinkClass, client_fd_removed), NULL, NULL, gst_tcp_marshal_VOID__INT, G_TYPE_NONE, 1, G_TYPE_INT); gst_element_class_add_pad_template (gstelement_class, gst_static_pad_template_get (&sinktemplate)); gst_element_class_set_details_simple (gstelement_class, "Multi filedescriptor sink", "Sink/Network", "Send data to multiple filedescriptors", "Thomas Vander Stichele <thomas at apestaart dot org>, " "Wim Taymans <wim@fluendo.com>"); gstelement_class->change_state = GST_DEBUG_FUNCPTR (gst_multi_fd_sink_change_state); gstbasesink_class->render = GST_DEBUG_FUNCPTR (gst_multi_fd_sink_render); klass->add = GST_DEBUG_FUNCPTR (gst_multi_fd_sink_add); klass->add_full = GST_DEBUG_FUNCPTR (gst_multi_fd_sink_add_full); klass->remove = GST_DEBUG_FUNCPTR (gst_multi_fd_sink_remove); klass->remove_flush = GST_DEBUG_FUNCPTR (gst_multi_fd_sink_remove_flush); klass->clear = GST_DEBUG_FUNCPTR (gst_multi_fd_sink_clear); klass->get_stats = GST_DEBUG_FUNCPTR (gst_multi_fd_sink_get_stats); GST_DEBUG_CATEGORY_INIT (multifdsink_debug, "multifdsink", 0, "FD sink"); } static void gst_multi_fd_sink_init (GstMultiFdSink * this) { GST_OBJECT_FLAG_UNSET (this, GST_MULTI_FD_SINK_OPEN); this->mode = DEFAULT_MODE; CLIENTS_LOCK_INIT (this); this->clients = NULL; this->fd_hash = g_hash_table_new (g_int_hash, g_int_equal); this->bufqueue = g_array_new (FALSE, TRUE, sizeof (GstBuffer *)); this->unit_type = DEFAULT_UNIT_TYPE; this->units_max = DEFAULT_UNITS_MAX; this->units_soft_max = DEFAULT_UNITS_SOFT_MAX; this->time_min = DEFAULT_TIME_MIN; this->bytes_min = DEFAULT_BYTES_MIN; this->buffers_min = DEFAULT_BUFFERS_MIN; this->recover_policy = DEFAULT_RECOVER_POLICY; this->timeout = DEFAULT_TIMEOUT; this->def_sync_method = DEFAULT_SYNC_METHOD; this->def_burst_unit = DEFAULT_BURST_UNIT; this->def_burst_value = DEFAULT_BURST_VALUE; this->qos_dscp = DEFAULT_QOS_DSCP; this->handle_read = DEFAULT_HANDLE_READ; this->resend_streamheader = DEFAULT_RESEND_STREAMHEADER; this->header_flags = 0; } static void gst_multi_fd_sink_finalize (GObject * object) { GstMultiFdSink *this; this = GST_MULTI_FD_SINK (object); CLIENTS_LOCK_FREE (this); g_hash_table_destroy (this->fd_hash); g_array_free (this->bufqueue, TRUE); G_OBJECT_CLASS (parent_class)->finalize (object); } static gint setup_dscp_client (GstMultiFdSink * sink, GstTCPClient * client) { gint tos; gint ret; union gst_sockaddr { struct sockaddr sa; struct sockaddr_in6 sa_in6; struct sockaddr_storage sa_stor; } sa; socklen_t slen = sizeof (sa); gint af; /* don't touch */ if (sink->qos_dscp < 0) return 0; if ((ret = getsockname (client->fd.fd, &sa.sa, &slen)) < 0) { GST_DEBUG_OBJECT (sink, "could not get sockname: %s", g_strerror (errno)); return ret; } af = sa.sa.sa_family; /* if this is an IPv4-mapped address then do IPv4 QoS */ if (af == AF_INET6) { GST_DEBUG_OBJECT (sink, "check IP6 socket"); if (IN6_IS_ADDR_V4MAPPED (&(sa.sa_in6.sin6_addr))) { GST_DEBUG_OBJECT (sink, "mapped to IPV4"); af = AF_INET; } } /* extract and shift 6 bits of the DSCP */ tos = (sink->qos_dscp & 0x3f) << 2; switch (af) { case AF_INET: ret = setsockopt (client->fd.fd, IPPROTO_IP, IP_TOS, &tos, sizeof (tos)); break; case AF_INET6: #ifdef IPV6_TCLASS ret = setsockopt (client->fd.fd, IPPROTO_IPV6, IPV6_TCLASS, &tos, sizeof (tos)); break; #endif default: ret = 0; GST_ERROR_OBJECT (sink, "unsupported AF"); break; } if (ret) GST_DEBUG_OBJECT (sink, "could not set DSCP: %s", g_strerror (errno)); return ret; } static void setup_dscp (GstMultiFdSink * sink) { GList *clients, *next; CLIENTS_LOCK (sink); for (clients = sink->clients; clients; clients = next) { GstTCPClient *client; client = (GstTCPClient *) clients->data; next = g_list_next (clients); setup_dscp_client (sink, client); } CLIENTS_UNLOCK (sink); } /* "add-full" signal implementation */ void gst_multi_fd_sink_add_full (GstMultiFdSink * sink, int fd, GstSyncMethod sync_method, GstTCPUnitType min_unit, guint64 min_value, GstTCPUnitType max_unit, guint64 max_value) { GstTCPClient *client; GList *clink; GTimeVal now; gint flags; struct stat statbuf; GST_DEBUG_OBJECT (sink, "[fd %5d] adding client, sync_method %d, " "min_unit %d, min_value %" G_GUINT64_FORMAT ", max_unit %d, max_value %" G_GUINT64_FORMAT, fd, sync_method, min_unit, min_value, max_unit, max_value); /* do limits check if we can */ if (min_unit == max_unit) { if (max_value != -1 && min_value != -1 && max_value < min_value) goto wrong_limits; } /* create client datastructure */ client = g_new0 (GstTCPClient, 1); client->fd.fd = fd; client->status = GST_CLIENT_STATUS_OK; client->bufpos = -1; client->flushcount = -1; client->bufoffset = 0; client->sending = NULL; client->bytes_sent = 0; client->dropped_buffers = 0; client->avg_queue_size = 0; client->first_buffer_ts = GST_CLOCK_TIME_NONE; client->last_buffer_ts = GST_CLOCK_TIME_NONE; client->new_connection = TRUE; client->burst_min_unit = min_unit; client->burst_min_value = min_value; client->burst_max_unit = max_unit; client->burst_max_value = max_value; client->sync_method = sync_method; client->currently_removing = FALSE; /* update start time */ g_get_current_time (&now); client->connect_time = GST_TIMEVAL_TO_TIME (now); client->disconnect_time = 0; /* set last activity time to connect time */ client->last_activity_time = client->connect_time; CLIENTS_LOCK (sink); /* check the hash to find a duplicate fd */ clink = g_hash_table_lookup (sink->fd_hash, &client->fd.fd); if (clink != NULL) goto duplicate; /* we can add the fd now */ clink = sink->clients = g_list_prepend (sink->clients, client); g_hash_table_insert (sink->fd_hash, &client->fd.fd, clink); sink->clients_cookie++; /* set the socket to non blocking */ if (fcntl (fd, F_SETFL, O_NONBLOCK) < 0) { GST_ERROR_OBJECT (sink, "failed to make socket %d non-blocking: %s", fd, g_strerror (errno)); } /* we always read from a client */ gst_poll_add_fd (sink->fdset, &client->fd); /* we don't try to read from write only fds */ if (sink->handle_read) { flags = fcntl (fd, F_GETFL, 0); if ((flags & O_ACCMODE) != O_WRONLY) { gst_poll_fd_ctl_read (sink->fdset, &client->fd, TRUE); } } /* figure out the mode, can't use send() for non sockets */ if (fstat (fd, &statbuf) == 0 && S_ISSOCK (statbuf.st_mode)) { client->is_socket = TRUE; setup_dscp_client (sink, client); } gst_poll_restart (sink->fdset); CLIENTS_UNLOCK (sink); g_signal_emit (G_OBJECT (sink), gst_multi_fd_sink_signals[SIGNAL_CLIENT_ADDED], 0, fd); return; /* errors */ wrong_limits: { GST_WARNING_OBJECT (sink, "[fd %5d] wrong values min =%" G_GUINT64_FORMAT ", max=%" G_GUINT64_FORMAT ", unit %d specified when adding client", fd, min_value, max_value, min_unit); return; } duplicate: { client->status = GST_CLIENT_STATUS_DUPLICATE; CLIENTS_UNLOCK (sink); GST_WARNING_OBJECT (sink, "[fd %5d] duplicate client found, refusing", fd); g_signal_emit (G_OBJECT (sink), gst_multi_fd_sink_signals[SIGNAL_CLIENT_REMOVED], 0, fd, client->status); g_free (client); return; } } /* "add" signal implementation */ void gst_multi_fd_sink_add (GstMultiFdSink * sink, int fd) { gst_multi_fd_sink_add_full (sink, fd, sink->def_sync_method, sink->def_burst_unit, sink->def_burst_value, sink->def_burst_unit, -1); } /* "remove" signal implementation */ void gst_multi_fd_sink_remove (GstMultiFdSink * sink, int fd) { GList *clink; GST_DEBUG_OBJECT (sink, "[fd %5d] removing client", fd); CLIENTS_LOCK (sink); clink = g_hash_table_lookup (sink->fd_hash, &fd); if (clink != NULL) { GstTCPClient *client = (GstTCPClient *) clink->data; if (client->status != GST_CLIENT_STATUS_OK) { GST_INFO_OBJECT (sink, "[fd %5d] Client already disconnecting with status %d", fd, client->status); goto done; } client->status = GST_CLIENT_STATUS_REMOVED; gst_multi_fd_sink_remove_client_link (sink, clink); gst_poll_restart (sink->fdset); } else { GST_WARNING_OBJECT (sink, "[fd %5d] no client with this fd found!", fd); } done: CLIENTS_UNLOCK (sink); } /* "remove-flush" signal implementation */ void gst_multi_fd_sink_remove_flush (GstMultiFdSink * sink, int fd) { GList *clink; GST_DEBUG_OBJECT (sink, "[fd %5d] flushing client", fd); CLIENTS_LOCK (sink); clink = g_hash_table_lookup (sink->fd_hash, &fd); if (clink != NULL) { GstTCPClient *client = (GstTCPClient *) clink->data; if (client->status != GST_CLIENT_STATUS_OK) { GST_INFO_OBJECT (sink, "[fd %5d] Client already disconnecting with status %d", fd, client->status); goto done; } /* take the position of the client as the number of buffers left to flush. * If the client was at position -1, we flush 0 buffers, 0 == flush 1 * buffer, etc... */ client->flushcount = client->bufpos + 1; /* mark client as flushing. We can not remove the client right away because * it might have some buffers to flush in the ->sending queue. */ client->status = GST_CLIENT_STATUS_FLUSHING; } else { GST_WARNING_OBJECT (sink, "[fd %5d] no client with this fd found!", fd); } done: CLIENTS_UNLOCK (sink); } /* can be called both through the signal (i.e. from any thread) or when * stopping, after the writing thread has shut down */ void gst_multi_fd_sink_clear (GstMultiFdSink * sink) { GList *clients, *next; guint32 cookie; GST_DEBUG_OBJECT (sink, "clearing all clients"); CLIENTS_LOCK (sink); restart: cookie = sink->clients_cookie; for (clients = sink->clients; clients; clients = next) { GstTCPClient *client; if (cookie != sink->clients_cookie) { GST_DEBUG_OBJECT (sink, "cookie changed while removing all clients"); goto restart; } client = (GstTCPClient *) clients->data; next = g_list_next (clients); client->status = GST_CLIENT_STATUS_REMOVED; gst_multi_fd_sink_remove_client_link (sink, clients); } gst_poll_restart (sink->fdset); CLIENTS_UNLOCK (sink); } /* "get-stats" signal implementation * the array returned contains: * * guint64 : bytes_sent * guint64 : connect time (in nanoseconds, since Epoch) * guint64 : disconnect time (in nanoseconds, since Epoch) * guint64 : time the client is/was connected (in nanoseconds) * guint64 : last activity time (in nanoseconds, since Epoch) * guint64 : buffers dropped due to recovery * guint64 : timestamp of the first buffer sent (in nanoseconds) * guint64 : timestamp of the last buffer sent (in nanoseconds) */ GValueArray * gst_multi_fd_sink_get_stats (GstMultiFdSink * sink, int fd) { GstTCPClient *client; GValueArray *result = NULL; GList *clink; CLIENTS_LOCK (sink); clink = g_hash_table_lookup (sink->fd_hash, &fd); if (clink == NULL) goto noclient; client = (GstTCPClient *) clink->data; if (client != NULL) { GValue value = { 0 }; guint64 interval; result = g_value_array_new (7); g_value_init (&value, G_TYPE_UINT64); g_value_set_uint64 (&value, client->bytes_sent); result = g_value_array_append (result, &value); g_value_unset (&value); g_value_init (&value, G_TYPE_UINT64); g_value_set_uint64 (&value, client->connect_time); result = g_value_array_append (result, &value); g_value_unset (&value); if (client->disconnect_time == 0) { GTimeVal nowtv; g_get_current_time (&nowtv); interval = GST_TIMEVAL_TO_TIME (nowtv) - client->connect_time; } else { interval = client->disconnect_time - client->connect_time; } g_value_init (&value, G_TYPE_UINT64); g_value_set_uint64 (&value, client->disconnect_time); result = g_value_array_append (result, &value); g_value_unset (&value); g_value_init (&value, G_TYPE_UINT64); g_value_set_uint64 (&value, interval); result = g_value_array_append (result, &value); g_value_unset (&value); g_value_init (&value, G_TYPE_UINT64); g_value_set_uint64 (&value, client->last_activity_time); result = g_value_array_append (result, &value); g_value_unset (&value); g_value_init (&value, G_TYPE_UINT64); g_value_set_uint64 (&value, client->dropped_buffers); result = g_value_array_append (result, &value); g_value_unset (&value); g_value_init (&value, G_TYPE_UINT64); g_value_set_uint64 (&value, client->first_buffer_ts); result = g_value_array_append (result, &value); g_value_unset (&value); g_value_init (&value, G_TYPE_UINT64); g_value_set_uint64 (&value, client->last_buffer_ts); result = g_value_array_append (result, &value); } noclient: CLIENTS_UNLOCK (sink); /* python doesn't like a NULL pointer yet */ if (result == NULL) { GST_WARNING_OBJECT (sink, "[fd %5d] no client with this found!", fd); result = g_value_array_new (0); } return result; } /* should be called with the clientslock helt. * Note that we don't close the fd as we didn't open it in the first * place. An application should connect to the client-fd-removed signal and * close the fd itself. */ static void gst_multi_fd_sink_remove_client_link (GstMultiFdSink * sink, GList * link) { int fd; GTimeVal now; GstTCPClient *client = (GstTCPClient *) link->data; GstMultiFdSinkClass *fclass; fclass = GST_MULTI_FD_SINK_GET_CLASS (sink); fd = client->fd.fd; if (client->currently_removing) { GST_WARNING_OBJECT (sink, "[fd %5d] client is already being removed", fd); return; } else { client->currently_removing = TRUE; } /* FIXME: if we keep track of ip we can log it here and signal */ switch (client->status) { case GST_CLIENT_STATUS_OK: GST_WARNING_OBJECT (sink, "[fd %5d] removing client %p for no reason", fd, client); break; case GST_CLIENT_STATUS_CLOSED: GST_DEBUG_OBJECT (sink, "[fd %5d] removing client %p because of close", fd, client); break; case GST_CLIENT_STATUS_REMOVED: GST_DEBUG_OBJECT (sink, "[fd %5d] removing client %p because the app removed it", fd, client); break; case GST_CLIENT_STATUS_SLOW: GST_INFO_OBJECT (sink, "[fd %5d] removing client %p because it was too slow", fd, client); break; case GST_CLIENT_STATUS_ERROR: GST_WARNING_OBJECT (sink, "[fd %5d] removing client %p because of error", fd, client); break; case GST_CLIENT_STATUS_FLUSHING: default: GST_WARNING_OBJECT (sink, "[fd %5d] removing client %p with invalid reason %d", fd, client, client->status); break; } gst_poll_remove_fd (sink->fdset, &client->fd); g_get_current_time (&now); client->disconnect_time = GST_TIMEVAL_TO_TIME (now); /* free client buffers */ g_slist_foreach (client->sending, (GFunc) gst_mini_object_unref, NULL); g_slist_free (client->sending); client->sending = NULL; if (client->caps) gst_caps_unref (client->caps); client->caps = NULL; /* unlock the mutex before signaling because the signal handler * might query some properties */ CLIENTS_UNLOCK (sink); g_signal_emit (G_OBJECT (sink), gst_multi_fd_sink_signals[SIGNAL_CLIENT_REMOVED], 0, fd, client->status); /* lock again before we remove the client completely */ CLIENTS_LOCK (sink); /* fd cannot be reused in the above signal callback so we can safely * remove it from the hashtable here */ if (!g_hash_table_remove (sink->fd_hash, &client->fd.fd)) { GST_WARNING_OBJECT (sink, "[fd %5d] error removing client %p from hash", client->fd.fd, client); } /* after releasing the lock above, the link could be invalid, more * precisely, the next and prev pointers could point to invalid list * links. One optimisation could be to add a cookie to the linked list * and take a shortcut when it did not change between unlocking and locking * our mutex. For now we just walk the list again. */ sink->clients = g_list_remove (sink->clients, client); sink->clients_cookie++; if (fclass->removed) fclass->removed (sink, client->fd.fd); g_free (client); CLIENTS_UNLOCK (sink); /* and the fd is really gone now */ g_signal_emit (G_OBJECT (sink), gst_multi_fd_sink_signals[SIGNAL_CLIENT_FD_REMOVED], 0, fd); CLIENTS_LOCK (sink); } /* handle a read on a client fd, * which either indicates a close or should be ignored * returns FALSE if some error occured or the client closed. */ static gboolean gst_multi_fd_sink_handle_client_read (GstMultiFdSink * sink, GstTCPClient * client) { int avail, fd; gboolean ret; fd = client->fd.fd; if (ioctl (fd, FIONREAD, &avail) < 0) goto ioctl_failed; GST_DEBUG_OBJECT (sink, "[fd %5d] select reports client read of %d bytes", fd, avail); ret = TRUE; if (avail == 0) { /* client sent close, so remove it */ GST_DEBUG_OBJECT (sink, "[fd %5d] client asked for close, removing", fd); client->status = GST_CLIENT_STATUS_CLOSED; ret = FALSE; } else if (avail < 0) { GST_WARNING_OBJECT (sink, "[fd %5d] avail < 0, removing", fd); client->status = GST_CLIENT_STATUS_ERROR; ret = FALSE; } else { guint8 dummy[512]; gint nread; /* just Read 'n' Drop, could also just drop the client as it's not supposed * to write to us except for closing the socket, I guess it's because we * like to listen to our customers. */ do { /* this is the maximum we can read */ gint to_read = MIN (avail, 512); GST_DEBUG_OBJECT (sink, "[fd %5d] client wants us to read %d bytes", fd, to_read); nread = read (fd, dummy, to_read); if (nread < -1) { GST_WARNING_OBJECT (sink, "[fd %5d] could not read %d bytes: %s (%d)", fd, to_read, g_strerror (errno), errno); client->status = GST_CLIENT_STATUS_ERROR; ret = FALSE; break; } else if (nread == 0) { GST_WARNING_OBJECT (sink, "[fd %5d] 0 bytes in read, removing", fd); client->status = GST_CLIENT_STATUS_ERROR; ret = FALSE; break; } avail -= nread; } while (avail > 0); } return ret; /* ERRORS */ ioctl_failed: { GST_WARNING_OBJECT (sink, "[fd %5d] ioctl failed: %s (%d)", fd, g_strerror (errno), errno); client->status = GST_CLIENT_STATUS_ERROR; return FALSE; } } static gboolean is_sync_frame (GstMultiFdSink * sink, GstBuffer * buffer) { if (GST_BUFFER_FLAG_IS_SET (buffer, GST_BUFFER_FLAG_DELTA_UNIT)) { return FALSE; } else if (!GST_BUFFER_FLAG_IS_SET (buffer, GST_BUFFER_FLAG_IN_CAPS)) { return TRUE; } return FALSE; } /* queue the given buffer for the given client, possibly adding the GDP * header if GDP is being used */ static gboolean gst_multi_fd_sink_client_queue_buffer (GstMultiFdSink * sink, GstTCPClient * client, GstBuffer * buffer) { GstCaps *caps; /* TRUE: send them if the new caps have them */ gboolean send_streamheader = FALSE; GstStructure *s; #if 0 /* before we queue the buffer, we check if we need to queue streamheader * buffers (because it's a new client, or because they changed) */ caps = gst_buffer_get_caps (buffer); /* cleaned up after streamheader */ #else caps = NULL; #endif if (!client->caps) { GST_DEBUG_OBJECT (sink, "[fd %5d] no previous caps for this client, send streamheader", client->fd.fd); send_streamheader = TRUE; client->caps = gst_caps_ref (caps); } else { /* there were previous caps recorded, so compare */ if (!gst_caps_is_equal (caps, client->caps)) { const GValue *sh1, *sh2; /* caps are not equal, but could still have the same streamheader */ s = gst_caps_get_structure (caps, 0); if (!gst_structure_has_field (s, "streamheader")) { /* no new streamheader, so nothing new to send */ GST_DEBUG_OBJECT (sink, "[fd %5d] new caps do not have streamheader, not sending", client->fd.fd); } else { /* there is a new streamheader */ s = gst_caps_get_structure (client->caps, 0); if (!gst_structure_has_field (s, "streamheader")) { /* no previous streamheader, so send the new one */ GST_DEBUG_OBJECT (sink, "[fd %5d] previous caps did not have streamheader, sending", client->fd.fd); send_streamheader = TRUE; } else { /* both old and new caps have streamheader set */ if (!sink->resend_streamheader) { GST_DEBUG_OBJECT (sink, "[fd %5d] asked to not resend the streamheader, not sending", client->fd.fd); send_streamheader = FALSE; } else { sh1 = gst_structure_get_value (s, "streamheader"); s = gst_caps_get_structure (caps, 0); sh2 = gst_structure_get_value (s, "streamheader"); if (gst_value_compare (sh1, sh2) != GST_VALUE_EQUAL) { GST_DEBUG_OBJECT (sink, "[fd %5d] new streamheader different from old, sending", client->fd.fd); send_streamheader = TRUE; } } } } } /* Replace the old caps */ gst_caps_unref (client->caps); client->caps = gst_caps_ref (caps); } if (G_UNLIKELY (send_streamheader)) { const GValue *sh; GArray *buffers; int i; GST_LOG_OBJECT (sink, "[fd %5d] sending streamheader from caps %" GST_PTR_FORMAT, client->fd.fd, caps); s = gst_caps_get_structure (caps, 0); if (!gst_structure_has_field (s, "streamheader")) { GST_DEBUG_OBJECT (sink, "[fd %5d] no new streamheader, so nothing to send", client->fd.fd); } else { GST_LOG_OBJECT (sink, "[fd %5d] sending streamheader from caps %" GST_PTR_FORMAT, client->fd.fd, caps); sh = gst_structure_get_value (s, "streamheader"); g_assert (G_VALUE_TYPE (sh) == GST_TYPE_ARRAY); buffers = g_value_peek_pointer (sh); GST_DEBUG_OBJECT (sink, "%d streamheader buffers", buffers->len); for (i = 0; i < buffers->len; ++i) { GValue *bufval; GstBuffer *buffer; bufval = &g_array_index (buffers, GValue, i); g_assert (G_VALUE_TYPE (bufval) == GST_TYPE_BUFFER); buffer = g_value_peek_pointer (bufval); GST_DEBUG_OBJECT (sink, "[fd %5d] queueing streamheader buffer of length %" G_GSIZE_FORMAT, client->fd.fd, gst_buffer_get_size (buffer)); gst_buffer_ref (buffer); client->sending = g_slist_append (client->sending, buffer); } } } gst_caps_unref (caps); caps = NULL; GST_LOG_OBJECT (sink, "[fd %5d] queueing buffer of length %" G_GSIZE_FORMAT, client->fd.fd, gst_buffer_get_size (buffer)); gst_buffer_ref (buffer); client->sending = g_slist_append (client->sending, buffer); return TRUE; } /* find the keyframe in the list of buffers starting the * search from @idx. @direction as -1 will search backwards, * 1 will search forwards. * Returns: the index or -1 if there is no keyframe after idx. */ static gint find_syncframe (GstMultiFdSink * sink, gint idx, gint direction) { gint i, len, result; /* take length of queued buffers */ len = sink->bufqueue->len; /* assume we don't find a keyframe */ result = -1; /* then loop over all buffers to find the first keyframe */ for (i = idx; i >= 0 && i < len; i += direction) { GstBuffer *buf; buf = g_array_index (sink->bufqueue, GstBuffer *, i); if (is_sync_frame (sink, buf)) { GST_LOG_OBJECT (sink, "found keyframe at %d from %d, direction %d", i, idx, direction); result = i; break; } } return result; } #define find_next_syncframe(s,i) find_syncframe(s,i,1) #define find_prev_syncframe(s,i) find_syncframe(s,i,-1) /* Get the number of buffers from the buffer queue needed to satisfy * the maximum max in the configured units. * If units are not BUFFERS, and there are insufficient buffers in the * queue to satify the limit, return len(queue) + 1 */ static gint get_buffers_max (GstMultiFdSink * sink, gint64 max) { switch (sink->unit_type) { case GST_TCP_UNIT_TYPE_BUFFERS: return max; case GST_TCP_UNIT_TYPE_TIME: { GstBuffer *buf; int i; int len; gint64 diff; GstClockTime first = GST_CLOCK_TIME_NONE; len = sink->bufqueue->len; for (i = 0; i < len; i++) { buf = g_array_index (sink->bufqueue, GstBuffer *, i); if (GST_BUFFER_TIMESTAMP_IS_VALID (buf)) { if (first == -1) first = GST_BUFFER_TIMESTAMP (buf); diff = first - GST_BUFFER_TIMESTAMP (buf); if (diff > max) return i + 1; } } return len + 1; } case GST_TCP_UNIT_TYPE_BYTES: { GstBuffer *buf; int i; int len; gint acc = 0; len = sink->bufqueue->len; for (i = 0; i < len; i++) { buf = g_array_index (sink->bufqueue, GstBuffer *, i); acc += gst_buffer_get_size (buf); if (acc > max) return i + 1; } return len + 1; } default: return max; } } /* find the positions in the buffer queue where *_min and *_max * is satisfied */ /* count the amount of data in the buffers and return the index * that satifies the given limits. * * Returns: index @idx in the buffer queue so that the given limits are * satisfied. TRUE if all the limits could be satisfied, FALSE if not * enough data was in the queue. * * FIXME, this code might now work if any of the units is in buffers... */ static gboolean find_limits (GstMultiFdSink * sink, gint * min_idx, gint bytes_min, gint buffers_min, gint64 time_min, gint * max_idx, gint bytes_max, gint buffers_max, gint64 time_max) { GstClockTime first, time; gint i, len, bytes; gboolean result, max_hit; /* take length of queue */ len = sink->bufqueue->len; /* this must hold */ g_assert (len > 0); GST_LOG_OBJECT (sink, "bytes_min %d, buffers_min %d, time_min %" GST_TIME_FORMAT ", bytes_max %d, buffers_max %d, time_max %" GST_TIME_FORMAT, bytes_min, buffers_min, GST_TIME_ARGS (time_min), bytes_max, buffers_max, GST_TIME_ARGS (time_max)); /* do the trivial buffer limit test */ if (buffers_min != -1 && len < buffers_min) { *min_idx = len - 1; *max_idx = len - 1; return FALSE; } result = FALSE; /* else count bytes and time */ first = -1; bytes = 0; /* unset limits */ *min_idx = -1; *max_idx = -1; max_hit = FALSE; i = 0; /* loop through the buffers, when a limit is ok, mark it * as -1, we have at least one buffer in the queue. */ do { GstBuffer *buf; /* if we checked all min limits, update result */ if (bytes_min == -1 && time_min == -1 && *min_idx == -1) { /* don't go below 0 */ *min_idx = MAX (i - 1, 0); } /* if we reached one max limit break out */ if (max_hit) { /* i > 0 when we get here, we subtract one to get the position * of the previous buffer. */ *max_idx = i - 1; /* we have valid complete result if we found a min_idx too */ result = *min_idx != -1; break; } buf = g_array_index (sink->bufqueue, GstBuffer *, i); bytes += gst_buffer_get_size (buf); /* take timestamp and save for the base first timestamp */ if ((time = GST_BUFFER_TIMESTAMP (buf)) != -1) { GST_LOG_OBJECT (sink, "Ts %" GST_TIME_FORMAT " on buffer", GST_TIME_ARGS (time)); if (first == -1) first = time; /* increase max usage if we did not fill enough. Note that * buffers are sorted from new to old, so the first timestamp is * bigger than the next one. */ if (time_min != -1 && first - time >= time_min) time_min = -1; if (time_max != -1 && first - time >= time_max) max_hit = TRUE; } else { GST_LOG_OBJECT (sink, "No timestamp on buffer"); } /* time is OK or unknown, check and increase if not enough bytes */ if (bytes_min != -1) { if (bytes >= bytes_min) bytes_min = -1; } if (bytes_max != -1) { if (bytes >= bytes_max) { max_hit = TRUE; } } i++; } while (i < len); /* if we did not hit the max or min limit, set to buffer size */ if (*max_idx == -1) *max_idx = len - 1; /* make sure min does not exceed max */ if (*min_idx == -1) *min_idx = *max_idx; return result; } /* parse the unit/value pair and assign it to the result value of the * right type, leave the other values untouched * * Returns: FALSE if the unit is unknown or undefined. TRUE otherwise. */ static gboolean assign_value (GstTCPUnitType unit, guint64 value, gint * bytes, gint * buffers, GstClockTime * time) { gboolean res = TRUE; /* set only the limit of the given format to the given value */ switch (unit) { case GST_TCP_UNIT_TYPE_BUFFERS: *buffers = (gint) value; break; case GST_TCP_UNIT_TYPE_TIME: *time = value; break; case GST_TCP_UNIT_TYPE_BYTES: *bytes = (gint) value; break; case GST_TCP_UNIT_TYPE_UNDEFINED: default: res = FALSE; break; } return res; } /* count the index in the buffer queue to satisfy the given unit * and value pair starting from buffer at index 0. * * Returns: TRUE if there was enough data in the queue to satisfy the * burst values. @idx contains the index in the buffer that contains enough * data to satisfy the limits or the last buffer in the queue when the * function returns FALSE. */ static gboolean count_burst_unit (GstMultiFdSink * sink, gint * min_idx, GstTCPUnitType min_unit, guint64 min_value, gint * max_idx, GstTCPUnitType max_unit, guint64 max_value) { gint bytes_min = -1, buffers_min = -1; gint bytes_max = -1, buffers_max = -1; GstClockTime time_min = GST_CLOCK_TIME_NONE, time_max = GST_CLOCK_TIME_NONE; assign_value (min_unit, min_value, &bytes_min, &buffers_min, &time_min); assign_value (max_unit, max_value, &bytes_max, &buffers_max, &time_max); return find_limits (sink, min_idx, bytes_min, buffers_min, time_min, max_idx, bytes_max, buffers_max, time_max); } /* decide where in the current buffer queue this new client should start * receiving buffers from. * This function is called whenever a client is connected and has not yet * received a buffer. * If this returns -1, it means that we haven't found a good point to * start streaming from yet, and this function should be called again later * when more buffers have arrived. */ static gint gst_multi_fd_sink_new_client (GstMultiFdSink * sink, GstTCPClient * client) { gint result; GST_DEBUG_OBJECT (sink, "[fd %5d] new client, deciding where to start in queue", client->fd.fd); GST_DEBUG_OBJECT (sink, "queue is currently %d buffers long", sink->bufqueue->len); switch (client->sync_method) { case GST_SYNC_METHOD_LATEST: /* no syncing, we are happy with whatever the client is going to get */ result = client->bufpos; GST_DEBUG_OBJECT (sink, "[fd %5d] SYNC_METHOD_LATEST, position %d", client->fd.fd, result); break; case GST_SYNC_METHOD_NEXT_KEYFRAME: { /* if one of the new buffers (between client->bufpos and 0) in the queue * is a sync point, we can proceed, otherwise we need to keep waiting */ GST_LOG_OBJECT (sink, "[fd %5d] new client, bufpos %d, waiting for keyframe", client->fd.fd, client->bufpos); result = find_prev_syncframe (sink, client->bufpos); if (result != -1) { GST_DEBUG_OBJECT (sink, "[fd %5d] SYNC_METHOD_NEXT_KEYFRAME: result %d", client->fd.fd, result); break; } /* client is not on a syncbuffer, need to skip these buffers and * wait some more */ GST_LOG_OBJECT (sink, "[fd %5d] new client, skipping buffer(s), no syncpoint found", client->fd.fd); client->bufpos = -1; break; } case GST_SYNC_METHOD_LATEST_KEYFRAME: { GST_DEBUG_OBJECT (sink, "[fd %5d] SYNC_METHOD_LATEST_KEYFRAME", client->fd.fd); /* for new clients we initially scan the complete buffer queue for * a sync point when a buffer is added. If we don't find a keyframe, * we need to wait for the next keyframe and so we change the client's * sync method to GST_SYNC_METHOD_NEXT_KEYFRAME. */ result = find_next_syncframe (sink, 0); if (result != -1) { GST_DEBUG_OBJECT (sink, "[fd %5d] SYNC_METHOD_LATEST_KEYFRAME: result %d", client->fd.fd, result); break; } GST_DEBUG_OBJECT (sink, "[fd %5d] SYNC_METHOD_LATEST_KEYFRAME: no keyframe found, " "switching to SYNC_METHOD_NEXT_KEYFRAME", client->fd.fd); /* throw client to the waiting state */ client->bufpos = -1; /* and make client sync to next keyframe */ client->sync_method = GST_SYNC_METHOD_NEXT_KEYFRAME; break; } case GST_SYNC_METHOD_BURST: { gboolean ok; gint max; /* move to the position where we satisfy the client's burst * parameters. If we could not satisfy the parameters because there * is not enough data, we just send what we have (which is in result). * We use the max value to limit the search */ ok = count_burst_unit (sink, &result, client->burst_min_unit, client->burst_min_value, &max, client->burst_max_unit, client->burst_max_value); GST_DEBUG_OBJECT (sink, "[fd %5d] SYNC_METHOD_BURST: burst_unit returned %d, result %d", client->fd.fd, ok, result); GST_LOG_OBJECT (sink, "min %d, max %d", result, max); /* we hit the max and it is below the min, use that then */ if (max != -1 && max <= result) { result = MAX (max - 1, 0); GST_DEBUG_OBJECT (sink, "[fd %5d] SYNC_METHOD_BURST: result above max, taken down to %d", client->fd.fd, result); } break; } case GST_SYNC_METHOD_BURST_KEYFRAME: { gint min_idx, max_idx; gint next_syncframe, prev_syncframe; /* BURST_KEYFRAME: * * _always_ start sending a keyframe to the client. We first search * a keyframe between min/max limits. If there is none, we send it the * last keyframe before min. If there is none, the behaviour is like * NEXT_KEYFRAME. */ /* gather burst limits */ count_burst_unit (sink, &min_idx, client->burst_min_unit, client->burst_min_value, &max_idx, client->burst_max_unit, client->burst_max_value); GST_LOG_OBJECT (sink, "min %d, max %d", min_idx, max_idx); /* first find a keyframe after min_idx */ next_syncframe = find_next_syncframe (sink, min_idx); if (next_syncframe != -1 && next_syncframe < max_idx) { /* we have a valid keyframe and it's below the max */ GST_LOG_OBJECT (sink, "found keyframe in min/max limits"); result = next_syncframe; break; } /* no valid keyframe, try to find one below min */ prev_syncframe = find_prev_syncframe (sink, min_idx); if (prev_syncframe != -1) { GST_WARNING_OBJECT (sink, "using keyframe below min in BURST_KEYFRAME sync mode"); result = prev_syncframe; break; } /* no prev keyframe or not enough data */ GST_WARNING_OBJECT (sink, "no prev keyframe found in BURST_KEYFRAME sync mode, waiting for next"); /* throw client to the waiting state */ client->bufpos = -1; /* and make client sync to next keyframe */ client->sync_method = GST_SYNC_METHOD_NEXT_KEYFRAME; result = -1; break; } case GST_SYNC_METHOD_BURST_WITH_KEYFRAME: { gint min_idx, max_idx; gint next_syncframe; /* BURST_WITH_KEYFRAME: * * try to start sending a keyframe to the client. We first search * a keyframe between min/max limits. If there is none, we send it the * amount of data up 'till min. */ /* gather enough data to burst */ count_burst_unit (sink, &min_idx, client->burst_min_unit, client->burst_min_value, &max_idx, client->burst_max_unit, client->burst_max_value); GST_LOG_OBJECT (sink, "min %d, max %d", min_idx, max_idx); /* first find a keyframe after min_idx */ next_syncframe = find_next_syncframe (sink, min_idx); if (next_syncframe != -1 && next_syncframe < max_idx) { /* we have a valid keyframe and it's below the max */ GST_LOG_OBJECT (sink, "found keyframe in min/max limits"); result = next_syncframe; break; } /* no keyframe, send data from min_idx */ GST_WARNING_OBJECT (sink, "using min in BURST_WITH_KEYFRAME sync mode"); /* make sure we don't go over the max limit */ if (max_idx != -1 && max_idx <= min_idx) { result = MAX (max_idx - 1, 0); } else { result = min_idx; } break; } default: g_warning ("unknown sync method %d", client->sync_method); result = client->bufpos; break; } return result; } /* Handle a write on a client, * which indicates a read request from a client. * * For each client we maintain a queue of GstBuffers that contain the raw bytes * we need to send to the client. In the case of the GDP protocol, we create * buffers out of the header bytes so that we can focus only on sending * buffers. * * We first check to see if we need to send caps (in GDP) and streamheaders. * If so, we queue them. * * Then we run into the main loop that tries to send as many buffers as * possible. It will first exhaust the client->sending queue and if the queue * is empty, it will pick a buffer from the global queue. * * Sending the buffers from the client->sending queue is basically writing * the bytes to the socket and maintaining a count of the bytes that were * sent. When the buffer is completely sent, it is removed from the * client->sending queue and we try to pick a new buffer for sending. * * When the sending returns a partial buffer we stop sending more data as * the next send operation could block. * * This functions returns FALSE if some error occured. */ static gboolean gst_multi_fd_sink_handle_client_write (GstMultiFdSink * sink, GstTCPClient * client) { int fd = client->fd.fd; gboolean more; gboolean flushing; GstClockTime now; GTimeVal nowtv; g_get_current_time (&nowtv); now = GST_TIMEVAL_TO_TIME (nowtv); flushing = client->status == GST_CLIENT_STATUS_FLUSHING; more = TRUE; do { gint maxsize; if (!client->sending) { /* client is not working on a buffer */ if (client->bufpos == -1) { /* client is too fast, remove from write queue until new buffer is * available */ gst_poll_fd_ctl_write (sink->fdset, &client->fd, FALSE); /* if we flushed out all of the client buffers, we can stop */ if (client->flushcount == 0) goto flushed; return TRUE; } else { /* client can pick a buffer from the global queue */ GstBuffer *buf; GstClockTime timestamp; /* for new connections, we need to find a good spot in the * bufqueue to start streaming from */ if (client->new_connection && !flushing) { gint position = gst_multi_fd_sink_new_client (sink, client); if (position >= 0) { /* we got a valid spot in the queue */ client->new_connection = FALSE; client->bufpos = position; } else { /* cannot send data to this client yet */ gst_poll_fd_ctl_write (sink->fdset, &client->fd, FALSE); return TRUE; } } /* we flushed all remaining buffers, no need to get a new one */ if (client->flushcount == 0) goto flushed; /* grab buffer */ buf = g_array_index (sink->bufqueue, GstBuffer *, client->bufpos); client->bufpos--; /* update stats */ timestamp = GST_BUFFER_TIMESTAMP (buf); if (client->first_buffer_ts == GST_CLOCK_TIME_NONE) client->first_buffer_ts = timestamp; if (timestamp != -1) client->last_buffer_ts = timestamp; /* decrease flushcount */ if (client->flushcount != -1) client->flushcount--; GST_LOG_OBJECT (sink, "[fd %5d] client %p at position %d", fd, client, client->bufpos); /* queueing a buffer will ref it */ gst_multi_fd_sink_client_queue_buffer (sink, client, buf); /* need to start from the first byte for this new buffer */ client->bufoffset = 0; } } /* see if we need to send something */ if (client->sending) { ssize_t wrote; GstBuffer *head; guint8 *data; gsize size; /* pick first buffer from list */ head = GST_BUFFER (client->sending->data); data = gst_buffer_map (head, &size, NULL, GST_MAP_READ); maxsize = size - client->bufoffset; /* try to write the complete buffer */ #ifdef MSG_NOSIGNAL #define FLAGS MSG_NOSIGNAL #else #define FLAGS 0 #endif if (client->is_socket) { wrote = send (fd, data + client->bufoffset, maxsize, FLAGS); } else { wrote = write (fd, data + client->bufoffset, maxsize); } gst_buffer_unmap (head, data, size); if (wrote < 0) { /* hmm error.. */ if (errno == EAGAIN) { /* nothing serious, resource was unavailable, try again later */ more = FALSE; } else if (errno == ECONNRESET) { goto connection_reset; } else { goto write_error; } } else { if (wrote < maxsize) { /* partial write means that the client cannot read more and we should * stop sending more */ GST_LOG_OBJECT (sink, "partial write on %d of %" G_GSSIZE_FORMAT " bytes", fd, wrote); client->bufoffset += wrote; more = FALSE; } else { /* complete buffer was written, we can proceed to the next one */ client->sending = g_slist_remove (client->sending, head); gst_buffer_unref (head); /* make sure we start from byte 0 for the next buffer */ client->bufoffset = 0; } /* update stats */ client->bytes_sent += wrote; client->last_activity_time = now; sink->bytes_served += wrote; } } } while (more); return TRUE; /* ERRORS */ flushed: { GST_DEBUG_OBJECT (sink, "[fd %5d] flushed, removing", fd); client->status = GST_CLIENT_STATUS_REMOVED; return FALSE; } connection_reset: { GST_DEBUG_OBJECT (sink, "[fd %5d] connection reset by peer, removing", fd); client->status = GST_CLIENT_STATUS_CLOSED; return FALSE; } write_error: { GST_WARNING_OBJECT (sink, "[fd %5d] could not write, removing client: %s (%d)", fd, g_strerror (errno), errno); client->status = GST_CLIENT_STATUS_ERROR; return FALSE; } } /* calculate the new position for a client after recovery. This function * does not update the client position but merely returns the required * position. */ static gint gst_multi_fd_sink_recover_client (GstMultiFdSink * sink, GstTCPClient * client) { gint newbufpos; GST_WARNING_OBJECT (sink, "[fd %5d] client %p is lagging at %d, recover using policy %d", client->fd.fd, client, client->bufpos, sink->recover_policy); switch (sink->recover_policy) { case GST_RECOVER_POLICY_NONE: /* do nothing, client will catch up or get kicked out when it reaches * the hard max */ newbufpos = client->bufpos; break; case GST_RECOVER_POLICY_RESYNC_LATEST: /* move to beginning of queue */ newbufpos = -1; break; case GST_RECOVER_POLICY_RESYNC_SOFT_LIMIT: /* move to beginning of soft max */ newbufpos = get_buffers_max (sink, sink->units_soft_max); break; case GST_RECOVER_POLICY_RESYNC_KEYFRAME: /* find keyframe in buffers, we search backwards to find the * closest keyframe relative to what this client already received. */ newbufpos = MIN (sink->bufqueue->len - 1, get_buffers_max (sink, sink->units_soft_max) - 1); while (newbufpos >= 0) { GstBuffer *buf; buf = g_array_index (sink->bufqueue, GstBuffer *, newbufpos); if (is_sync_frame (sink, buf)) { /* found a buffer that is not a delta unit */ break; } newbufpos--; } break; default: /* unknown recovery procedure */ newbufpos = get_buffers_max (sink, sink->units_soft_max); break; } return newbufpos; } /* Queue a buffer on the global queue. * * This function adds the buffer to the front of a GArray. It removes the * tail buffer if the max queue size is exceeded, unreffing the queued buffer. * Note that unreffing the buffer is not a problem as clients who * started writing out this buffer will still have a reference to it in the * client->sending queue. * * After adding the buffer, we update all client positions in the queue. If * a client moves over the soft max, we start the recovery procedure for this * slow client. If it goes over the hard max, it is put into the slow list * and removed. * * Special care is taken of clients that were waiting for a new buffer (they * had a position of -1) because they can proceed after adding this new buffer. * This is done by adding the client back into the write fd_set and signaling * the select thread that the fd_set changed. */ static void gst_multi_fd_sink_queue_buffer (GstMultiFdSink * sink, GstBuffer * buf) { GList *clients, *next; gint queuelen; gboolean need_signal = FALSE; gint max_buffer_usage; gint i; GTimeVal nowtv; GstClockTime now; gint max_buffers, soft_max_buffers; guint cookie; g_get_current_time (&nowtv); now = GST_TIMEVAL_TO_TIME (nowtv); CLIENTS_LOCK (sink); /* add buffer to queue */ g_array_prepend_val (sink->bufqueue, buf); queuelen = sink->bufqueue->len; if (sink->units_max > 0) max_buffers = get_buffers_max (sink, sink->units_max); else max_buffers = -1; if (sink->units_soft_max > 0) soft_max_buffers = get_buffers_max (sink, sink->units_soft_max); else soft_max_buffers = -1; GST_LOG_OBJECT (sink, "Using max %d, softmax %d", max_buffers, soft_max_buffers); /* then loop over the clients and update the positions */ max_buffer_usage = 0; restart: cookie = sink->clients_cookie; for (clients = sink->clients; clients; clients = next) { GstTCPClient *client; if (cookie != sink->clients_cookie) { GST_DEBUG_OBJECT (sink, "Clients cookie outdated, restarting"); goto restart; } client = (GstTCPClient *) clients->data; next = g_list_next (clients); client->bufpos++; GST_LOG_OBJECT (sink, "[fd %5d] client %p at position %d", client->fd.fd, client, client->bufpos); /* check soft max if needed, recover client */ if (soft_max_buffers > 0 && client->bufpos >= soft_max_buffers) { gint newpos; newpos = gst_multi_fd_sink_recover_client (sink, client); if (newpos != client->bufpos) { client->dropped_buffers += client->bufpos - newpos; client->bufpos = newpos; client->discont = TRUE; GST_INFO_OBJECT (sink, "[fd %5d] client %p position reset to %d", client->fd.fd, client, client->bufpos); } else { GST_INFO_OBJECT (sink, "[fd %5d] client %p not recovering position", client->fd.fd, client); } } /* check hard max and timeout, remove client */ if ((max_buffers > 0 && client->bufpos >= max_buffers) || (sink->timeout > 0 && now - client->last_activity_time > sink->timeout)) { /* remove client */ GST_WARNING_OBJECT (sink, "[fd %5d] client %p is too slow, removing", client->fd.fd, client); /* remove the client, the fd set will be cleared and the select thread * will be signaled */ client->status = GST_CLIENT_STATUS_SLOW; /* set client to invalid position while being removed */ client->bufpos = -1; gst_multi_fd_sink_remove_client_link (sink, clients); need_signal = TRUE; continue; } else if (client->bufpos == 0 || client->new_connection) { /* can send data to this client now. need to signal the select thread that * the fd_set changed */ gst_poll_fd_ctl_write (sink->fdset, &client->fd, TRUE); need_signal = TRUE; } /* keep track of maximum buffer usage */ if (client->bufpos > max_buffer_usage) { max_buffer_usage = client->bufpos; } } /* make sure we respect bytes-min, buffers-min and time-min when they are set */ { gint usage, max; GST_LOG_OBJECT (sink, "extending queue %d to respect time_min %" GST_TIME_FORMAT ", bytes_min %d, buffers_min %d", max_buffer_usage, GST_TIME_ARGS (sink->time_min), sink->bytes_min, sink->buffers_min); /* get index where the limits are ok, we don't really care if all limits * are ok, we just queue as much as we need. We also don't compare against * the max limits. */ find_limits (sink, &usage, sink->bytes_min, sink->buffers_min, sink->time_min, &max, -1, -1, -1); max_buffer_usage = MAX (max_buffer_usage, usage + 1); GST_LOG_OBJECT (sink, "extended queue to %d", max_buffer_usage); } /* now look for sync points and make sure there is at least one * sync point in the queue. We only do this if the LATEST_KEYFRAME or * BURST_KEYFRAME mode is selected */ if (sink->def_sync_method == GST_SYNC_METHOD_LATEST_KEYFRAME || sink->def_sync_method == GST_SYNC_METHOD_BURST_KEYFRAME) { /* no point in searching beyond the queue length */ gint limit = queuelen; GstBuffer *buf; /* no point in searching beyond the soft-max if any. */ if (soft_max_buffers > 0) { limit = MIN (limit, soft_max_buffers); } GST_LOG_OBJECT (sink, "extending queue to include sync point, now at %d, limit is %d", max_buffer_usage, limit); for (i = 0; i < limit; i++) { buf = g_array_index (sink->bufqueue, GstBuffer *, i); if (is_sync_frame (sink, buf)) { /* found a sync frame, now extend the buffer usage to * include at least this frame. */ max_buffer_usage = MAX (max_buffer_usage, i); break; } } GST_LOG_OBJECT (sink, "max buffer usage is now %d", max_buffer_usage); } GST_LOG_OBJECT (sink, "len %d, usage %d", queuelen, max_buffer_usage); /* nobody is referencing units after max_buffer_usage so we can * remove them from the queue. We remove them in reverse order as * this is the most optimal for GArray. */ for (i = queuelen - 1; i > max_buffer_usage; i--) { GstBuffer *old; /* queue exceeded max size */ queuelen--; old = g_array_index (sink->bufqueue, GstBuffer *, i); sink->bufqueue = g_array_remove_index (sink->bufqueue, i); /* unref tail buffer */ gst_buffer_unref (old); } /* save for stats */ sink->buffers_queued = max_buffer_usage; CLIENTS_UNLOCK (sink); /* and send a signal to thread if fd_set changed */ if (need_signal) { gst_poll_restart (sink->fdset); } } /* Handle the clients. Basically does a blocking select for one * of the client fds to become read or writable. We also have a * filedescriptor to receive commands on that we need to check. * * After going out of the select call, we read and write to all * clients that can do so. Badly behaving clients are put on a * garbage list and removed. */ static void gst_multi_fd_sink_handle_clients (GstMultiFdSink * sink) { int result; GList *clients, *next; gboolean try_again; GstMultiFdSinkClass *fclass; guint cookie; fclass = GST_MULTI_FD_SINK_GET_CLASS (sink); do { try_again = FALSE; /* check for: * - server socket input (ie, new client connections) * - client socket input (ie, clients saying goodbye) * - client socket output (ie, client reads) */ GST_LOG_OBJECT (sink, "waiting on action on fdset"); result = gst_poll_wait (sink->fdset, sink->timeout != 0 ? sink->timeout : GST_CLOCK_TIME_NONE); /* Handle the special case in which the sink is not receiving more buffers * and will not disconnect inactive client in the streaming thread. */ if (G_UNLIKELY (result == 0)) { GstClockTime now; GTimeVal nowtv; g_get_current_time (&nowtv); now = GST_TIMEVAL_TO_TIME (nowtv); CLIENTS_LOCK (sink); for (clients = sink->clients; clients; clients = next) { GstTCPClient *client; client = (GstTCPClient *) clients->data; next = g_list_next (clients); if (sink->timeout > 0 && now - client->last_activity_time > sink->timeout) { client->status = GST_CLIENT_STATUS_SLOW; gst_multi_fd_sink_remove_client_link (sink, clients); } } CLIENTS_UNLOCK (sink); return; } else if (result < 0) { GST_WARNING_OBJECT (sink, "wait failed: %s (%d)", g_strerror (errno), errno); if (errno == EBADF) { /* ok, so one or more of the fds is invalid. We loop over them to find * the ones that give an error to the F_GETFL fcntl. */ CLIENTS_LOCK (sink); restart: cookie = sink->clients_cookie; for (clients = sink->clients; clients; clients = next) { GstTCPClient *client; int fd; long flags; int res; if (cookie != sink->clients_cookie) { GST_DEBUG_OBJECT (sink, "Cookie changed finding bad fd"); goto restart; } client = (GstTCPClient *) clients->data; next = g_list_next (clients); fd = client->fd.fd; res = fcntl (fd, F_GETFL, &flags); if (res == -1) { GST_WARNING_OBJECT (sink, "fnctl failed for %d, removing: %s (%d)", fd, g_strerror (errno), errno); if (errno == EBADF) { client->status = GST_CLIENT_STATUS_ERROR; /* releases the CLIENTS lock */ gst_multi_fd_sink_remove_client_link (sink, clients); } } } CLIENTS_UNLOCK (sink); /* after this, go back in the select loop as the read/writefds * are not valid */ try_again = TRUE; } else if (errno == EINTR) { /* interrupted system call, just redo the wait */ try_again = TRUE; } else if (errno == EBUSY) { /* the call to gst_poll_wait() was flushed */ return; } else { /* this is quite bad... */ GST_ELEMENT_ERROR (sink, RESOURCE, READ, (NULL), ("select failed: %s (%d)", g_strerror (errno), errno)); return; } } else { GST_LOG_OBJECT (sink, "wait done: %d sockets with events", result); } } while (try_again); /* subclasses can check fdset with this virtual function */ if (fclass->wait) fclass->wait (sink, sink->fdset); /* Check the clients */ CLIENTS_LOCK (sink); restart2: cookie = sink->clients_cookie; for (clients = sink->clients; clients; clients = next) { GstTCPClient *client; if (sink->clients_cookie != cookie) { GST_DEBUG_OBJECT (sink, "Restarting loop, cookie out of date"); goto restart2; } client = (GstTCPClient *) clients->data; next = g_list_next (clients); if (client->status != GST_CLIENT_STATUS_FLUSHING && client->status != GST_CLIENT_STATUS_OK) { gst_multi_fd_sink_remove_client_link (sink, clients); continue; } if (gst_poll_fd_has_closed (sink->fdset, &client->fd)) { client->status = GST_CLIENT_STATUS_CLOSED; gst_multi_fd_sink_remove_client_link (sink, clients); continue; } if (gst_poll_fd_has_error (sink->fdset, &client->fd)) { GST_WARNING_OBJECT (sink, "gst_poll_fd_has_error for %d", client->fd.fd); client->status = GST_CLIENT_STATUS_ERROR; gst_multi_fd_sink_remove_client_link (sink, clients); continue; } if (gst_poll_fd_can_read (sink->fdset, &client->fd)) { /* handle client read */ if (!gst_multi_fd_sink_handle_client_read (sink, client)) { gst_multi_fd_sink_remove_client_link (sink, clients); continue; } } if (gst_poll_fd_can_write (sink->fdset, &client->fd)) { /* handle client write */ if (!gst_multi_fd_sink_handle_client_write (sink, client)) { gst_multi_fd_sink_remove_client_link (sink, clients); continue; } } } CLIENTS_UNLOCK (sink); } /* we handle the client communication in another thread so that we do not block * the gstreamer thread while we select() on the client fds */ static gpointer gst_multi_fd_sink_thread (GstMultiFdSink * sink) { while (sink->running) { gst_multi_fd_sink_handle_clients (sink); } return NULL; } static GstFlowReturn gst_multi_fd_sink_render (GstBaseSink * bsink, GstBuffer * buf) { GstMultiFdSink *sink; gboolean in_caps; #if 0 GstCaps *bufcaps, *padcaps; #endif sink = GST_MULTI_FD_SINK (bsink); g_return_val_if_fail (GST_OBJECT_FLAG_IS_SET (sink, GST_MULTI_FD_SINK_OPEN), GST_FLOW_WRONG_STATE); #if 0 /* since we check every buffer for streamheader caps, we need to make * sure every buffer has caps set */ bufcaps = gst_buffer_get_caps (buf); padcaps = GST_PAD_CAPS (GST_BASE_SINK_PAD (bsink)); /* make sure we have caps on the pad */ if (!padcaps && !bufcaps) goto no_caps; #endif /* get IN_CAPS first, code below might mess with the flags */ in_caps = GST_BUFFER_FLAG_IS_SET (buf, GST_BUFFER_FLAG_IN_CAPS); #if 0 /* stamp the buffer with previous caps if no caps set */ if (!bufcaps) { if (!gst_buffer_is_writable (buf)) { /* metadata is not writable, copy will be made and original buffer * will be unreffed so we need to ref so that we don't lose the * buffer in the render method. */ gst_buffer_ref (buf); /* the new buffer is ours only, we keep it out of the scope of this * function */ buf = gst_buffer_make_writable (buf); } else { /* else the metadata is writable, we ref because we keep the buffer * out of the scope of this method */ gst_buffer_ref (buf); } /* buffer metadata is writable now, set the caps */ gst_buffer_set_caps (buf, padcaps); } else { gst_caps_unref (bufcaps); /* since we keep this buffer out of the scope of this method */ gst_buffer_ref (buf); } #endif GST_LOG_OBJECT (sink, "received buffer %p, in_caps: %s, offset %" G_GINT64_FORMAT ", offset_end %" G_GINT64_FORMAT ", timestamp %" GST_TIME_FORMAT ", duration %" GST_TIME_FORMAT, buf, in_caps ? "yes" : "no", GST_BUFFER_OFFSET (buf), GST_BUFFER_OFFSET_END (buf), GST_TIME_ARGS (GST_BUFFER_TIMESTAMP (buf)), GST_TIME_ARGS (GST_BUFFER_DURATION (buf))); /* if we get IN_CAPS buffers, but the previous buffer was not IN_CAPS, * it means we're getting new streamheader buffers, and we should clear * the old ones */ if (in_caps && sink->previous_buffer_in_caps == FALSE) { GST_DEBUG_OBJECT (sink, "receiving new IN_CAPS buffers, clearing old streamheader"); g_slist_foreach (sink->streamheader, (GFunc) gst_mini_object_unref, NULL); g_slist_free (sink->streamheader); sink->streamheader = NULL; } /* save the current in_caps */ sink->previous_buffer_in_caps = in_caps; /* if the incoming buffer is marked as IN CAPS, then we assume for now * it's a streamheader that needs to be sent to each new client, so we * put it on our internal list of streamheader buffers. * FIXME: we could check if the buffer's contents are in fact part of the * current streamheader. * * We don't send the buffer to the client, since streamheaders are sent * separately when necessary. */ if (in_caps) { GST_DEBUG_OBJECT (sink, "appending IN_CAPS buffer with length %" G_GSIZE_FORMAT " to streamheader", gst_buffer_get_size (buf)); sink->streamheader = g_slist_append (sink->streamheader, buf); } else { /* queue the buffer, this is a regular data buffer. */ gst_multi_fd_sink_queue_buffer (sink, buf); sink->bytes_to_serve += gst_buffer_get_size (buf); } return GST_FLOW_OK; /* ERRORS */ #if 0 no_caps: { GST_ELEMENT_ERROR (sink, CORE, NEGOTIATION, (NULL), ("Received first buffer without caps set")); return GST_FLOW_NOT_NEGOTIATED; } #endif } static void gst_multi_fd_sink_set_property (GObject * object, guint prop_id, const GValue * value, GParamSpec * pspec) { GstMultiFdSink *multifdsink; multifdsink = GST_MULTI_FD_SINK (object); switch (prop_id) { case PROP_MODE: multifdsink->mode = g_value_get_enum (value); break; case PROP_BUFFERS_MAX: multifdsink->units_max = g_value_get_int (value); break; case PROP_BUFFERS_SOFT_MAX: multifdsink->units_soft_max = g_value_get_int (value); break; case PROP_TIME_MIN: multifdsink->time_min = g_value_get_int64 (value); break; case PROP_BYTES_MIN: multifdsink->bytes_min = g_value_get_int (value); break; case PROP_BUFFERS_MIN: multifdsink->buffers_min = g_value_get_int (value); break; case PROP_UNIT_TYPE: multifdsink->unit_type = g_value_get_enum (value); break; case PROP_UNITS_MAX: multifdsink->units_max = g_value_get_int64 (value); break; case PROP_UNITS_SOFT_MAX: multifdsink->units_soft_max = g_value_get_int64 (value); break; case PROP_RECOVER_POLICY: multifdsink->recover_policy = g_value_get_enum (value); break; case PROP_TIMEOUT: multifdsink->timeout = g_value_get_uint64 (value); break; case PROP_SYNC_METHOD: multifdsink->def_sync_method = g_value_get_enum (value); break; case PROP_BURST_UNIT: multifdsink->def_burst_unit = g_value_get_enum (value); break; case PROP_BURST_VALUE: multifdsink->def_burst_value = g_value_get_uint64 (value); break; case PROP_QOS_DSCP: multifdsink->qos_dscp = g_value_get_int (value); setup_dscp (multifdsink); break; case PROP_HANDLE_READ: multifdsink->handle_read = g_value_get_boolean (value); break; case PROP_RESEND_STREAMHEADER: multifdsink->resend_streamheader = g_value_get_boolean (value); break; default: G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec); break; } } static void gst_multi_fd_sink_get_property (GObject * object, guint prop_id, GValue * value, GParamSpec * pspec) { GstMultiFdSink *multifdsink; multifdsink = GST_MULTI_FD_SINK (object); switch (prop_id) { case PROP_MODE: g_value_set_enum (value, multifdsink->mode); break; case PROP_BUFFERS_MAX: g_value_set_int (value, multifdsink->units_max); break; case PROP_BUFFERS_SOFT_MAX: g_value_set_int (value, multifdsink->units_soft_max); break; case PROP_TIME_MIN: g_value_set_int64 (value, multifdsink->time_min); break; case PROP_BYTES_MIN: g_value_set_int (value, multifdsink->bytes_min); break; case PROP_BUFFERS_MIN: g_value_set_int (value, multifdsink->buffers_min); break; case PROP_BUFFERS_QUEUED: g_value_set_uint (value, multifdsink->buffers_queued); break; case PROP_BYTES_QUEUED: g_value_set_uint (value, multifdsink->bytes_queued); break; case PROP_TIME_QUEUED: g_value_set_uint64 (value, multifdsink->time_queued); break; case PROP_UNIT_TYPE: g_value_set_enum (value, multifdsink->unit_type); break; case PROP_UNITS_MAX: g_value_set_int64 (value, multifdsink->units_max); break; case PROP_UNITS_SOFT_MAX: g_value_set_int64 (value, multifdsink->units_soft_max); break; case PROP_RECOVER_POLICY: g_value_set_enum (value, multifdsink->recover_policy); break; case PROP_TIMEOUT: g_value_set_uint64 (value, multifdsink->timeout); break; case PROP_SYNC_METHOD: g_value_set_enum (value, multifdsink->def_sync_method); break; case PROP_BYTES_TO_SERVE: g_value_set_uint64 (value, multifdsink->bytes_to_serve); break; case PROP_BYTES_SERVED: g_value_set_uint64 (value, multifdsink->bytes_served); break; case PROP_BURST_UNIT: g_value_set_enum (value, multifdsink->def_burst_unit); break; case PROP_BURST_VALUE: g_value_set_uint64 (value, multifdsink->def_burst_value); break; case PROP_QOS_DSCP: g_value_set_int (value, multifdsink->qos_dscp); break; case PROP_HANDLE_READ: g_value_set_boolean (value, multifdsink->handle_read); break; case PROP_RESEND_STREAMHEADER: g_value_set_boolean (value, multifdsink->resend_streamheader); break; case PROP_NUM_FDS: g_value_set_uint (value, g_hash_table_size (multifdsink->fd_hash)); break; default: G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec); break; } } /* create a socket for sending to remote machine */ static gboolean gst_multi_fd_sink_start (GstBaseSink * bsink) { GstMultiFdSinkClass *fclass; GstMultiFdSink *this; if (GST_OBJECT_FLAG_IS_SET (bsink, GST_MULTI_FD_SINK_OPEN)) return TRUE; this = GST_MULTI_FD_SINK (bsink); fclass = GST_MULTI_FD_SINK_GET_CLASS (this); GST_INFO_OBJECT (this, "starting in mode %d", this->mode); if ((this->fdset = gst_poll_new (TRUE)) == NULL) goto socket_pair; this->streamheader = NULL; this->bytes_to_serve = 0; this->bytes_served = 0; if (fclass->init) { fclass->init (this); } this->running = TRUE; #if !GLIB_CHECK_VERSION (2, 31, 0) this->thread = g_thread_create ((GThreadFunc) gst_multi_fd_sink_thread, this, TRUE, NULL); #else this->thread = g_thread_new ("multifdsink", (GThreadFunc) gst_multi_fd_sink_thread, this); #endif GST_OBJECT_FLAG_SET (this, GST_MULTI_FD_SINK_OPEN); return TRUE; /* ERRORS */ socket_pair: { GST_ELEMENT_ERROR (this, RESOURCE, OPEN_READ_WRITE, (NULL), GST_ERROR_SYSTEM); return FALSE; } } static gboolean multifdsink_hash_remove (gpointer key, gpointer value, gpointer data) { return TRUE; } static gboolean gst_multi_fd_sink_stop (GstBaseSink * bsink) { GstMultiFdSinkClass *fclass; GstMultiFdSink *this; GstBuffer *buf; int i; this = GST_MULTI_FD_SINK (bsink); fclass = GST_MULTI_FD_SINK_GET_CLASS (this); if (!GST_OBJECT_FLAG_IS_SET (bsink, GST_MULTI_FD_SINK_OPEN)) return TRUE; this->running = FALSE; gst_poll_set_flushing (this->fdset, TRUE); if (this->thread) { GST_DEBUG_OBJECT (this, "joining thread"); g_thread_join (this->thread); GST_DEBUG_OBJECT (this, "joined thread"); this->thread = NULL; } /* free the clients */ gst_multi_fd_sink_clear (this); if (this->streamheader) { g_slist_foreach (this->streamheader, (GFunc) gst_mini_object_unref, NULL); g_slist_free (this->streamheader); this->streamheader = NULL; } if (fclass->close) fclass->close (this); if (this->fdset) { gst_poll_free (this->fdset); this->fdset = NULL; } g_hash_table_foreach_remove (this->fd_hash, multifdsink_hash_remove, this); /* remove all queued buffers */ if (this->bufqueue) { GST_DEBUG_OBJECT (this, "Emptying bufqueue with %d buffers", this->bufqueue->len); for (i = this->bufqueue->len - 1; i >= 0; --i) { buf = g_array_index (this->bufqueue, GstBuffer *, i); GST_LOG_OBJECT (this, "Removing buffer %p (%d) with refcount %d", buf, i, GST_MINI_OBJECT_REFCOUNT (buf)); gst_buffer_unref (buf); this->bufqueue = g_array_remove_index (this->bufqueue, i); } /* freeing the array is done in _finalize */ } GST_OBJECT_FLAG_UNSET (this, GST_MULTI_FD_SINK_OPEN); return TRUE; } static GstStateChangeReturn gst_multi_fd_sink_change_state (GstElement * element, GstStateChange transition) { GstMultiFdSink *sink; GstStateChangeReturn ret; sink = GST_MULTI_FD_SINK (element); /* we disallow changing the state from the streaming thread */ if (g_thread_self () == sink->thread) return GST_STATE_CHANGE_FAILURE; switch (transition) { case GST_STATE_CHANGE_NULL_TO_READY: if (!gst_multi_fd_sink_start (GST_BASE_SINK (sink))) goto start_failed; break; case GST_STATE_CHANGE_READY_TO_PAUSED: break; case GST_STATE_CHANGE_PAUSED_TO_PLAYING: break; default: break; } ret = GST_ELEMENT_CLASS (parent_class)->change_state (element, transition); switch (transition) { case GST_STATE_CHANGE_PLAYING_TO_PAUSED: break; case GST_STATE_CHANGE_PAUSED_TO_READY: break; case GST_STATE_CHANGE_READY_TO_NULL: gst_multi_fd_sink_stop (GST_BASE_SINK (sink)); break; default: break; } return ret; /* ERRORS */ start_failed: { /* error message was posted */ return GST_STATE_CHANGE_FAILURE; } }