=== release 1.11.2 === 2017-02-24 Sebastian Dröge * configure.ac: releasing 1.11.2 2017-02-15 18:22:53 +0000 Tim-Philipp Müller * Makefile.am: meson: dist meson build files Ship meson build files in tarballs, so people who use tarballs in their builds can start playing with meson already. 2017-01-13 16:23:12 +0000 Vincent Penquerc'h * omx/gstomxaacenc.c: omxaacenc: let encoder know about incoming rate/channels https://bugzilla.gnome.org/show_bug.cgi?id=777223 2017-01-18 02:43:44 +1100 Matthew Waters * config/bellagio/meson.build: * config/meson.build: * config/rpi/meson.build: * examples/egl/meson.build: * examples/meson.build: * hooks/pre-commit.hook: * meson.build: * meson_options.txt: * omx/meson.build: build: add meson build definition Currently only been tested on the RPi within gst-build. 2017-01-18 15:21:35 +1100 Matthew Waters * examples/egl/testegl.c: examples/testegl: update for libgstgl changes 2017-01-12 16:33:09 +0200 Sebastian Dröge * configure.ac: Back to development === release 1.11.1 === 2017-01-12 16:26:55 +0200 Sebastian Dröge * ChangeLog: * NEWS: * RELEASE: * configure.ac: * gst-omx.doap: Release 1.11.1 2017-01-10 15:29:08 +0000 Vincent Penquerc'h * omx/gstomxaudioenc.c: omxaudioenc: set base class format instead of just source pad caps 2016-12-18 19:46:55 +0000 Graham Leggett * omx/gstomxaudiodec.c: * omx/gstomxvideodec.c: omx*dec: Flush before we stop the srcpad loop Flushing could otherwise hang if output port queue of pending buffers was empty https://bugzilla.gnome.org/show_bug.cgi?id=774654 2016-12-14 13:29:08 -0800 Reynaldo H. Verdejo Pinochet * omx/gstomx.c: Fix broken build due to syntax error Problem was introduced by 8716c23e2b0553db2982eb84c437f493c974385e 2016-12-12 11:12:48 +0000 Graham Leggett * omx/gstomx.c: Prevent early EOS by resetting eos flag once GST_OMX_ACQUIRE_BUFFER_EOS is triggered https://bugzilla.gnome.org/show_bug.cgi?id=774600 2016-12-12 11:09:15 +0000 Graham Leggett * omx/gstomx.c: Add clear debug logging on all the paths out of gst_omx_port_acquire_buffer() https://bugzilla.gnome.org/show_bug.cgi?id=774600 2016-12-01 18:23:50 +0100 George Kiagiadakis * config/rpi/gstomx.conf: * omx/gstomx.c: * omx/gstomx.h: Add a signals-premature-eos hack for egl_render egl_render seems to have a bug and signals EOS before it has finished pushing out all data; this hack simply makes acquire_buffer() wait a bit more before signalling EOS, in case egl_render decides to spit out some more data. https://bugzilla.gnome.org/show_bug.cgi?id=741856 2016-12-11 19:52:37 +0000 Graham Leggett * omx/gstomxvideo.c: Add support for OMX_COLOR_FormatYUV420PackedSemiPlanar and OMX_COLOR_Format24bitBGR888 https://bugzilla.gnome.org/show_bug.cgi?id=775959 2016-12-03 08:20:46 +0100 Edward Hervey * common: Automatic update of common submodule From ac2f647 to 39ac2f5 2016-11-26 11:27:58 +0000 Tim-Philipp Müller * .gitmodules: common: use https protocol for common submodule https://bugzilla.gnome.org/show_bug.cgi?id=775110 2016-11-25 23:56:06 +0200 Sebastian Dröge * omx/gstomx.c: omx: Fix compiler warning with latest clang gstomx.c:1376:42: error: implicit conversion from enumeration type 'GstOMXAcquireBufferReturn' to different enumeration type 'OMX_ERRORTYPE' (aka 'enum OMX_ERRORTYPE') [-Werror,-Wenum-conversion] g_return_val_if_fail (!port->tunneled, GST_OMX_ACQUIRE_BUFFER_ERROR); ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ https://bugzilla.gnome.org/show_bug.cgi?id=775112 2016-11-17 19:56:35 +1100 Matthew Waters * omx/gstomxvideodec.c: videodecoder: remove use of EGLImage orientation New code should use GstVideoTransformationMeta (The defaults do the right thing here though). === release 1.11.0 === 2016-11-01 18:53:25 +0200 Sebastian Dröge * configure.ac: Back to development === release 1.10.0 === 2016-11-01 18:20:48 +0200 Sebastian Dröge * ChangeLog: * NEWS: * RELEASE: * configure.ac: * gst-omx.doap: Release 1.10.0 === release 1.9.90 === 2016-09-30 13:04:51 +0300 Sebastian Dröge * ChangeLog: * NEWS: * RELEASE: * common: * configure.ac: * gst-omx.doap: Release 1.9.90 2016-09-14 11:33:13 +0200 Sebastian Dröge * configure.ac: configure: Depend on gstreamer 1.9.2.1 2016-09-12 14:09:46 +0200 Sebastian Dröge * configure.ac: * omx/gstomx.c: omx: Also search for gstomx.conf in the autoconf --sysconfdir https://bugzilla.gnome.org/show_bug.cgi?id=770743 2016-09-10 20:52:10 +1000 Jan Schmidt * autogen.sh: * common: Automatic update of common submodule From b18d820 to f980fd9 2016-09-10 09:58:16 +1000 Jan Schmidt * autogen.sh: * common: Automatic update of common submodule From ac2f647 to b18d820 2016-09-01 12:36:09 +0300 Sebastian Dröge * configure.ac: Back to development === release 1.9.2 === 2016-09-01 12:35:58 +0300 Sebastian Dröge * ChangeLog: * NEWS: * RELEASE: * common: * configure.ac: * gst-omx.doap: Release 1.9.2 2016-07-11 21:15:48 +0200 Stefan Sauer * common: Automatic update of common submodule From ac2f647 to f49c55e 2016-07-06 13:51:24 +0300 Sebastian Dröge * configure.ac: Back to development === release 1.9.1 === 2016-07-06 13:48:45 +0300 Sebastian Dröge * ChangeLog: * NEWS: * RELEASE: * common: * configure.ac: * gst-omx.doap: Release 1.9.1 2016-06-29 16:37:43 +0900 Kazunori Kobayashi * omx/gstomxvideodec.c: omxvideodec: Use GST_VIDEO_FRAME_PLANE_STRIDE() to get output buffer's stride GST_VIDEO_FRAME_PLANE_STRIDE() should be used to get the actual buffer stride, as reported in the buffers's GstVideoMeta, when copying data to that buffer. https://bugzilla.gnome.org/show_bug.cgi?id=768173 2016-06-21 11:48:40 -0400 Nicolas Dufresne * common: Automatic update of common submodule From ac2f647 to f363b32 2016-06-21 11:43:13 +0200 Aurélien Zanelli * omx/gstomxaudioenc.c: omxaudioenc: implement GstPreset interface To allow user to use GstPreset to quickly save and load a set of parameters. https://bugzilla.gnome.org/show_bug.cgi?id=767907 2016-06-21 11:41:15 +0200 Aurélien Zanelli * omx/gstomxvideoenc.c: omxvideoenc: implement GstPreset interface To allow user to use GstPreset to quickly save and load a set of parameters. https://bugzilla.gnome.org/show_bug.cgi?id=767907 2016-06-17 12:06:48 +0300 Sebastian Dröge * configure.ac: * omx/gstomx.h: * omx/gstomxaudiodec.c: * omx/gstomxaudioenc.c: * omx/gstomxvideo.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: #define OMX_SKIP64BIT on the RPi as required by their API Also add generic support for OMX_SKIP64BIT to gst-omx, in case other implementations also #define that for whatever reason. https://bugzilla.gnome.org/show_bug.cgi?id=766475 2016-06-17 10:59:45 +0300 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Implement ::drain() virtual method https://bugzilla.gnome.org/show_bug.cgi?id=767641 2016-06-04 19:31:45 +0100 Tim-Philipp Müller * configure.ac: configure: remove AG_GST_PARSE_SUBSYSTEM_DISABLES This would check which subsystems are disabled in core by grepping gstconfig.h. Only problem is: gstconfig.h has moved into libdir now so we've been checking a non-existent file for a while now. The macro would just sets GST_DISABLE_* for use in configure.ac and Makefile.am, but we don't use that anywhere so just get rid of it (the one place where we use GST_DISABLE_GST_DEBUG is in a .c file which gets the define from the gstconfig.h include). https://bugzilla.gnome.org/show_bug.cgi?id=750056 2016-01-20 03:10:38 +0900 Gwang Yoon Hwang * examples/egl/testegl.c: * omx/gstomxvideodec.c: omxvideodec : Use gstglmemoryegl for the RPi Modified to use gstglmemoryegl to avoid texture creation/copy operations at the glupload. [Matthew Waters]: gst-indent the sources and port testegl to GstGLMemoryEGL https://bugzilla.gnome.org/show_bug.cgi?id=760918 2016-04-14 10:04:32 +0100 Julien Isorce * common: Automatic update of common submodule From 6f2d209 to ac2f647 2016-02-26 12:42:41 +0200 Sebastian Dröge * common: Automatic update of common submodule From b64f03f to 6f2d209 2016-02-17 20:51:03 +1100 Matthew Waters * examples/egl/testegl.c: examples: update egl example for gstgl API changes https://bugzilla.gnome.org/show_bug.cgi?id=762053 https://bugzilla.gnome.org/show_bug.cgi?id=753917 2016-02-05 18:11:06 -0300 Thiago Santos * autogen.sh: * common: Automatic update of common submodule From 86e4663 to b64f03f 2015-12-21 00:43:49 +0100 Koop Mast * configure.ac: configure: Make -Bsymbolic check work with clang. Update the -Bsymbolic check with the version glib has. This version works with clang. https://bugzilla.gnome.org/show_bug.cgi?id=759713 2015-12-07 09:11:32 -0500 Nicolas Dufresne * autogen.sh: * common: Automatic update of common submodule From b319909 to 86e4663 2015-11-18 13:00:28 +0000 Enrique Ocaña González * omx/gstomx.c: Remember the last_error after a failed set state call to avoid blocking the next get state call gst_omx_video_dec_flush() blocks forever in http://cgit.freedesktop.org/gstreamer/gst-omx/tree/omx/gstomxvideodec.c?id=9adf0ff82903cad5331e40975ae91ed5d11bc102#n2110 when the previous call to gst_omx_component_set_state() fails in http://cgit.freedesktop.org/gstreamer/gst-omx/tree/omx/gstomx.c?id=9adf0ff82903cad5331e40975ae91ed5d11bc102#n827. To mitigate that, I set "last_error" to true, so the code in http://cgit.freedesktop.org/gstreamer/gst-omx/tree/omx/gstomx.c?id=9adf0ff82903cad5331e40975ae91ed5d11bc102#n862 exits early and doesn't block. https://bugzilla.gnome.org/show_bug.cgi?id=758274 2015-11-18 12:59:59 +0000 Enrique Ocaña González * omx/gstomxaudiodec.c: * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: Properly handle drain requests while flushing Without this commit the decoder streaming thread stops without ever attending the drain request, leaving the decoder input thread waiting forever. https://bugzilla.gnome.org/show_bug.cgi?id=758274 2015-11-10 10:42:35 +0100 Nicolas Huet * omx/gstomx.c: omx: fix hacks leak on class init 2015-10-21 14:37:13 +0100 Tim-Philipp Müller * common: Automatic update of common submodule From b99800a to b319909 2015-10-21 14:28:41 +0300 Sebastian Dröge * common: Automatic update of common submodule From 9aed1d7 to b99800a 2015-09-01 16:08:11 -0300 Thiago Santos * omx/gstomxaacdec.c: omxaacdec: Do not accept unknown layouts It was defaulting to RAW when an unknown layout was received but the caps template would actually forbid that on the caps query or accept-caps anyway. 2015-09-01 08:59:54 -0300 Thiago Santos * omx/gstomxaudiodec.c: omxaudiodec: use default pad accept-caps handling Instead of the audiodecoder one. The OMX audioo decoders have their valid input in the template pad, so just check against that to avoid doing a query downstream. 2015-08-28 12:57:33 -0300 Thiago Santos * omx/gstomxvideodec.c: omxvideodec: use default pad accept-caps handling Instead of the videodecoder one. The OMX video decoders have their valid input in the template pad, so just check against that to avoid doing a query downstream. 2015-08-22 15:54:55 +0000 Graham Leggett * omx/gstomxvideoenc.c: omxvideoenc: Add keyframe support for the Rpi, using OMX_IndexConfigBrcmVideoRequestIFrame https://bugzilla.gnome.org/show_bug.cgi?id=753085 2015-08-20 17:20:50 +0900 Vineeth TM * examples/egl/testegl.c: gst-omx: Fix memory leaks when context parse fails When g_option_context_parse fails, context and error variables are not getting free'd which results in memory leaks. Free'ing the same. And replacing g_error_free with g_clear_error, which checks if the error being passed is not NULL and sets the variable to NULL on free'ing. https://bugzilla.gnome.org/show_bug.cgi?id=753865 2015-08-16 14:53:42 +0200 Philippe Normand * omx/gstomxh264dec.c: omxh264dec: implement is_format_change The omxvideodecoder class only checks some of the caps parameters but if other fields change such as h264 profile and/or level it wouldn't trigger a reconfiguration. https://bugzilla.gnome.org/show_bug.cgi?id=752376 2015-07-03 00:26:48 +0200 Aurélien Zanelli * omx/gstomxvideodec.c: omxvideodec: unref allocator after getting it from allocation query Otherwise a reference will be leaked for each allocator. It only happens when target platform is Raspberry Pi and when we have GL support. https://bugzilla.gnome.org/show_bug.cgi?id=751867 2015-07-03 21:59:54 +0200 Stefan Sauer * common: Automatic update of common submodule From f74b2df to 9aed1d7 2015-06-16 17:50:14 -0400 Nicolas Dufresne * common: Automatic update of common submodule From 6015d26 to f74b2df 2015-06-09 11:30:49 +0200 Edward Hervey * common: Automatic update of common submodule From d9a3353 to 6015d26 2015-06-08 23:08:28 +0200 Stefan Sauer * common: Automatic update of common submodule From d37af32 to d9a3353 2015-06-07 23:07:22 +0200 Stefan Sauer * common: Automatic update of common submodule From 21ba2e5 to d37af32 2015-06-07 17:32:25 +0200 Stefan Sauer * common: Automatic update of common submodule From c408583 to 21ba2e5 2015-06-07 17:16:43 +0200 Stefan Sauer * autogen.sh: * common: Automatic update of common submodule From c8fb372 to c408583 2015-05-19 18:21:40 +0300 Sebastian Dröge * omx/gstomxaudiodec.c: * omx/gstomxaudiodec.h: omxaudiodec: Add an output adapter for chunking the output into codec frames Otherwise the base class will be confused. See https://bugzilla.gnome.org/show_bug.cgi?id=685730 2015-04-26 18:24:13 +0100 Tim-Philipp Müller * Android.mk: * omx/Makefile.am: Remove obsolete Android build cruft This is not needed any longer. 2015-04-22 10:40:22 +0200 Sebastian Dröge * INSTALL: Remove INSTALL file autotools automatically generate this, and when using different versions for autogen.sh there will always be changes to a file tracked by git. 2015-04-08 15:57:59 +0100 Tim-Philipp Müller * .gitignore: * Makefile.am: * configure.ac: * m4/Makefile.am: Add m4 directory so aclocal doesn't complain in autogen.sh Might come in handy, and these warnings seem to be fatal in some environments. You may need to git clean -x -d -f your tree before git pulling/merging. 2015-04-07 22:25:57 +0100 Tim-Philipp Müller * INSTALL: * autogen.sh: Update autogen.sh to latest version 2015-04-03 18:58:17 +0100 Tim-Philipp Müller * common: Automatic update of common submodule From bc76a8b to c8fb372 2015-03-06 12:12:49 +0000 Luis de Bethencourt * omx/gstomxaacdec.c: omxaudiodec: add comment explaining duplicate code path 2015-03-06 12:09:06 +0000 Luis de Bethencourt * omx/gstomxaacdec.c: Revert "omxaudiodec: remove duplicate code path" This reverts commit a8d26ff27a8b43f589424a59294f9057641b2a46. 2015-03-06 12:03:56 +0000 Luis de Bethencourt * omx/gstomx.c: omx: handle both errors in the two steps of update_port_definition Also consider potential errors in the _get_parameter() in the return of the update_port_definition function. CID #1287052 2015-03-06 10:57:53 +0000 Luis de Bethencourt * omx/gstomxaudioenc.c: omxaudioenc: impossible if statement ret is set to GST_STATE_CHANGE_SUCCESS and never touched, so it is impossible for it to be anything else at the if check. Remove the if check. CID #1287053 2015-03-06 10:54:43 +0000 Luis de Bethencourt * omx/gstomxaudiodec.c: omxaudiodec: impossible if statement ret is set to GST_STATE_CHANGE_SUCCESS and never touched, so it is impossible for it to be anything else at the if check. Remove it. CID #1287054 2015-03-06 10:50:30 +0000 Luis de Bethencourt * omx/gstomxaacdec.c: omxaudiodec: remove duplicate code path 2014-12-19 11:19:55 +0200 George Kiagiadakis * omx/gstomx.c: omx: call handle_messages() only once in acquire_buffer() to avoid potential deadlock There is one rare case where calling handle_messages() more than once can cause a deadlock in the video decoder element: - sink pad thread starts the src pad task (gst_omx_video_dec_loop()) - _video_dec_loop() calls gst_omx_port_acquire_buffer() on dec_out_port - blocks in gst_omx_component_wait_message() releasing comp->lock and comp->messages_lock (initially, there are no buffers configured on that port, so it waits for OMX_EventPortSettingsChanged) - the sink pad thread pushes a buffer to the decoder with gst_omx_port_release_buffer() - _release_buffer() grabs comp->lock and sends the buffer to OMX, which consumes it immediately - EmptyBufferDone gets called at this point, which signals _wait_message() to unblock - the message from EmptyBufferDone is processed in gst_omx_component_handle_messages() called from gst_omx_port_release_buffer() - gst_omx_port_release_buffer releases comp->lock - the src pad thread now gets to run, grabbing comp->lock while it exits from _wait_message() - _acquire_buffer() calls the _handle_messages() on the next line after _wait_message(), which does nothing (no pending messages) - then it goes to "retry:" and calls _handle_messages() again, which also does nothing (still no pending messages) - scheduler switches to a videocore thread that calls EventHandler, informing us about the OMX_EventPortSettingsChanged event that just arrived - EventHandler graps comp->messages_lock, but not comp->lock, so it can run in parallel at this point just fine. - scheduler switches back to the src pad thread (which is in the middle of _acquire_buffer()) - the next _handle_messages() which is right before if (g_queue_is_empty (&port->pending_buffers)) processes the OMX_EventPortSettingsChanged - the buffer queue is still empty, so that thread blocks again in _wait_message() - the sink pad thread tries to acquire the next input port buffer - _acquire_buffer() also blocks this thread in: if (comp->pending_reconfigure_outports) { ... _wait_message() ... } - DEADLOCK. gstreamer is waiting for omx to do something, omx waits for gstreamer to do something. By removing those extra _handle_messages() calls, we can ensure that all the checks of _acquire_buffer() will re-run. In the above case, after the scheduler switches back to the middle of _acquire_buffer(), the code will enter _wait_message(), which will see that there are pending messages and will return immediately, going back to "retry:" and re-doing all the checks properly. https://bugzilla.gnome.org/show_bug.cgi?id=741854 2015-02-26 09:27:44 +0900 Wonchul Lee * omx/gstomx.c: omx: cleanup code a bit to remove else statement https://bugzilla.gnome.org/show_bug.cgi?id=745191 2015-01-12 16:13:35 +0100 Stefan Sauer * common: Automatic update of common submodule From f2c6b95 to bc76a8b 2014-12-18 10:56:15 +0100 Sebastian Dröge * common: Automatic update of common submodule From ef1ffdc to f2c6b95 2014-11-27 17:12:42 +0100 Edward Hervey * common: Automatic update of common submodule From 7bb2bce to ef1ffdc 2014-11-13 09:55:02 +0900 Jun Ji * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxamrdec.c: * omx/gstomxamrdec.h: omx: Add omxamrdec https://bugzilla.gnome.org/show_bug.cgi?id=739333 2014-10-27 18:00:50 +0100 Sebastian Dröge * common: Automatic update of common submodule From 84d06cd to 7bb2bce 2014-10-21 13:03:44 +0100 Tim-Philipp Müller * common: Automatic update of common submodule From a8c8939 to 84d06cd 2014-10-21 13:00:10 +0200 Stefan Sauer * common: Automatic update of common submodule From 1f5d3c3 to a8c8939 2014-09-30 10:47:20 +0300 Sebastian Dröge * omx/gstomxaudiodec.c: omxaudiodec: Clean up code a bit to get rid of useless NULL checks 2014-09-30 10:50:07 +0900 junji * omx/gstomxaudiodec.c: omxaudiodec: Unmap input buffers after usage https://bugzilla.gnome.org/show_bug.cgi?id=736314 2014-08-31 20:30:13 +0000 Michal Lazo * omx/gstomxvideoenc.c: omxvideoenc: Setup aspect ratio on RPi Needs firmware from yesterday or newer to work with all possible aspect ratios. Before that it only supported a fixed list. https://bugzilla.gnome.org/show_bug.cgi?id=732533 2014-08-28 10:44:31 +0300 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Implement the hack flag GST_OMX_HACK_NO_COMPONENT_RECONFIGURE 2014-08-28 10:43:22 +0300 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Use the base class' open/close vfuncs instead of calling them ourselves 2014-08-26 22:13:53 -0500 Peng Liu * config/rpi/gstomx.conf: * omx/gstomxvideoenc.c: omxvideoenc: Implement the hack flag GST_OMX_HACK_NO_COMPONENT_RECONFIGURE Fix a video encoder stall problem on RPi when changing the aspect ratio. https://bugzilla.gnome.org/show_bug.cgi?id=732533 2014-08-14 17:36:11 +0300 Sebastian Dröge * omx/gstomxaudiodec.c: * omx/gstomxaudiodec.h: * omx/gstomxaudioenc.c: * omx/gstomxaudioenc.h: * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: omx: Let base classes handle EOS https://bugzilla.gnome.org//show_bug.cgi?id=734774 2014-08-14 17:33:07 +0300 Sebastian Dröge * omx/gstomxaudiodec.c: omxaudiodec: Fix flushing logic and make it more similar to the video decoder === release 1.2.0 === 2014-07-23 11:28:12 +0200 Sebastian Dröge * ChangeLog: * NEWS: * RELEASE: * configure.ac: * gst-omx.doap: * omx/Makefile.am: Release 1.2.0 2014-07-22 09:23:00 +0200 Sebastian Dröge * config/bellagio/gstomx.conf: * config/rpi/gstomx.conf: config: Update ranks to PRIMARY+1 to have higher preference than avdec_* See https://bugzilla.gnome.org/show_bug.cgi?id=732161 2014-07-20 17:46:30 +0200 Sebastian Dröge * omx/gstomxaudiosink.c: omxaudiosink: Set port to not flushing in prepare() and keep it at flushing in unprepare() https://bugzilla.gnome.org/show_bug.cgi?id=733168 2014-07-13 22:15:18 +0200 Sebastian Dröge * omx/gstomxaacdec.c: * omx/gstomxaudiodec.c: * omx/gstomxaudiodec.h: * omx/gstomxmp3dec.c: omxaudiodec: Implement setting of fallback channel positions 2014-07-13 18:22:39 +0200 Sebastian Dröge * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxaacdec.c: * omx/gstomxaacdec.h: * omx/gstomxmp3dec.c: omx: Add AAC audio decoder 2014-07-02 09:22:28 +0200 Sebastian Dröge * omx/gstomxaudiodec.c: omxaudiodec: Get PCM parameters from the out port, not the in port 2014-05-15 13:24:39 +0200 Sebastian Dröge * omx/gstomxaudiodec.c: omxaudiodec: Implement hack for not disabling the output port after set_format until the output format is known Needed on some OMX implementations, e.g. the one from Atmel. It does not send the settings-changed event on the output port if it is disabled. 2014-05-10 23:12:54 +0200 Sebastian Dröge * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxaudiodec.c: * omx/gstomxaudiodec.h: * omx/gstomxmp3dec.c: * omx/gstomxmp3dec.h: omx: Add audio decoder base class and a subclass for MP3 2014-07-01 09:38:01 +0200 Sebastian Dröge * configure.ac: * omx/Makefile.am: omx: Link to gmodule-2.0-no-export for being able to use the g_module_*() API https://bugzilla.gnome.org/show_bug.cgi?id=732518 2014-06-30 15:00:54 +0200 Sebastian Dröge * examples/egl/testegl.c: examples: #define GST_USE_UNSTABLE_API for libgstgl 2014-06-29 19:10:19 +0200 Sebastian Dröge * omx/gstomxh264enc.c: * omx/gstomxh264enc.h: omxh264enc: Properly accumulate headers and push before the next frame Fixes output of encoding on RPi, where each header buffer (SPS and PPS) is in a separate OMX buffer. https://bugzilla.gnome.org/show_bug.cgi?id=726669 2014-06-29 19:04:54 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Implement flush() instead of the deprecated reset() 2014-06-25 17:14:18 +0200 Sebastian Dröge * config/rpi/gstomx.conf: rpi: It's 44100Hz, not 41400Hz 2014-06-25 11:12:51 +0100 Julien Isorce * configure.ac: configure.ac: require gstgl >= 1.3.3 2014-04-25 13:25:05 +0100 Julien Isorce * Makefile.am: * configure.ac: example: enable testegl See https://bugzilla.gnome.org/show_bug.cgi?id=728940 2014-06-25 10:19:54 +0100 Julien Isorce * examples/egl/testegl.c: testegl: do matrix mutlplication in the shader See https://bugzilla.gnome.org/show_bug.cgi?id=728940 2014-06-25 09:36:38 +0100 Julien Isorce * examples/egl/testegl.c: testegl: add a comment for the parse command See https://bugzilla.gnome.org/show_bug.cgi?id=728940 2014-04-25 17:32:16 +0100 Julien Isorce * examples/egl/Makefile.am: * examples/egl/cube_texture_and_coords.h: * examples/egl/testegl.c: testegl: convert code from GLESv1 to GLESv2 See https://bugzilla.gnome.org/show_bug.cgi?id=728940 2014-04-25 13:21:59 +0100 Julien Isorce * examples/egl/Makefile.am: * examples/egl/testegl.c: testegl: port to gstgl API - append a glfilter just before fakesink So that we get gltexture or eglimages - propagate our EGLDisplay to the pipeline see GST_QUERY_CONTEXT - share our EGLContext with the iternal gl context of the pipeline, see GST_QUERY_ALLOCATION - use GstVideoGLTextureUploadMeta to upload the incoming gltexture or eglimage to our gl texture TODO: convert from GLESv1 to GLESv2 See https://bugzilla.gnome.org/show_bug.cgi?id=728940 2014-06-24 14:52:58 +0200 Sebastian Dröge * omx/gstomxbufferpool.c: * omx/gstomxbufferpool.h: * omx/gstomxvideodec.c: omxbufferpool: Copy buffers if the stride does not match and we can't use video meta https://bugzilla.gnome.org/show_bug.cgi?id=731672 2014-06-24 14:52:43 +0200 Sebastian Dröge * configure.ac: * omx/gstomx.h: * omx/gstomxvp8dec.h: omx: Only include OMX_VideoExt.h conditionally It does not exist on the RPi for example. 2014-06-24 13:59:44 +0200 Sebastian Dröge * configure.ac: configure.ac: Require GStreamer core/base >= 1.2.2 Needed at least for gst_video_decoder_release_frame(). 2014-06-24 13:02:13 +0200 Sebastian Dröge * omx/gstomxbufferpool.c: omxbufferpool: Fix format string compiler warning 2014-06-22 21:11:45 +0000 Michal Lazo * omx/gstomxbufferpool.c: omxbufferpool: Initialize debug category 2014-06-24 12:42:22 +0200 Sebastian Dröge * omx/gstomxbufferpool.c: omxbufferpool: Properly convert OMX alignment to GStreamer alignment GStreamer uses a bitmask for the alignment while OMX uses the alignment itself. Let's convert. https://bugzilla.gnome.org/show_bug.cgi?id=710564 2014-06-24 11:11:28 +0200 Sebastian Dröge * omx/gstomxh264enc.c: omxh264enc: Don't let baseclass finish frames for SPS/PPS buffers Otherwise we a) send them twice, and b) finish a frame for something that does not even include a frame. https://bugzilla.gnome.org/show_bug.cgi?id=726669 2014-06-24 10:22:37 +0200 Sebastian Dröge * omx/gstomxvideo.h: omxvideo: Include the separate headers too for compatibility with 1.0.x 2014-03-24 16:09:40 +0800 Zhao, Halley * configure.ac: * omx/gstomxvp8dec.h: omxvp8dec: use VP8 definition from OMX_VideoExt.h https://bugzilla.gnome.org/show_bug.cgi?id=726957 2014-03-24 15:33:26 +0800 Zhao, Halley * configure.ac: configure: add --with-omx-header-path option for external omx headers https://bugzilla.gnome.org/show_bug.cgi?id=726957 2014-06-18 23:04:33 +0200 Aurélien Zanelli * omx/gstomxvideodec.c: omxvideodec: fix a query leak Also add a debug message if query fails. https://bugzilla.gnome.org/show_bug.cgi?id=731898 2014-05-30 15:29:15 +0200 Aurélien Zanelli * omx/gstomxvideodec.c: omxvideodec: release frames with old PTS to avoid memory issue Interlaced stream could make the decoder use two input frames to produce one output frame causing the gstvideodecoder frame list to grow. Assuming the video decoder output frame in display order rather than in decoding order, this commit add a way to release frames with PTS less than current output frame. https://bugzilla.gnome.org/show_bug.cgi?id=730995 2013-06-27 21:59:29 +0900 Kazunori Kobayashi * omx/gstomx.c: omx: Fix a missing g_free() in error path This fixes a memory leak with g_strdup() when an error occurs. https://bugzilla.gnome.org/show_bug.cgi?id=731141 2014-06-02 15:34:09 +0200 Aurélien Zanelli * omx/gstomxvideodec.c: omxvideodec: add missing stream unlock in error path 2014-05-31 15:12:05 +0200 Sebastian Dröge * omx/gstomx.c: omx: Don't handle disabling/enabling ports exactly like flushing Otherwise we might abort a flush operation in another thread when enabling/disabling ports, leading to deadlocks sometimes. https://bugzilla.gnome.org/show_bug.cgi?id=730989 2014-05-26 11:02:10 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Don't leak buffer pool config in error cases CID 1216158 2014-05-21 10:53:43 +0200 Sebastian Dröge * common: Automatic update of common submodule From 211fa5f to 1f5d3c3 2014-05-19 09:10:07 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Don't forget to unref codec state CID 1214603 2014-05-19 09:08:33 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Make output buffer pointer always initialized CID 1214605 2014-05-19 09:06:42 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Check return value of gst_buffer_map() CID 1214599 2014-05-19 09:04:09 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Check return value of gst_omx_port_set_enabled() for errors CID 1214589 2014-05-19 09:01:46 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Check return values of buffer pool config parsing functions CID 1214588 2014-05-19 08:48:50 +0200 Sebastian Dröge * omx/gstomx.c: omx: Remove dead code, buf can never be NULL here as we just check for that the line above CID 1214596 2014-05-19 08:47:36 +0200 Sebastian Dröge * omx/gstomx.c: omx: Fix comparisons in gst_omx_state_to_string() case to actually make sense CID 1214593 2014-05-19 08:45:10 +0200 Sebastian Dröge * omx/gstomx.c: omx: Make sure to compare the error codes as unsigned integers so that comparisons >2**31 actually work CID 1214592 2014-05-19 08:40:23 +0200 Sebastian Dröge * omx/gstomx.c: omx: Fix comparisons in gst_omx_command_to_string() default cause to actually work CID 1214591 2014-05-15 13:22:56 +0200 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Implement hack for not disabling the output port after set_format until the output format is known Needed on some OMX implementations, e.g. the one from Atmel. It does not send the settings-changed event on the output port if it is disabled. 2014-05-15 13:21:07 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Implement hack for not disabling the output port after set_format until the output format is known Needed on some OMX implementations, e.g. the one from Atmel. It does not send the settings-changed event on the output port if it is disabled. 2014-05-15 10:58:34 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxvideodec.c: omx: Add a hack for not disabling the output port after set_format until the output format is known Needed on some OMX implementations, e.g. the one from Atmel. It does not send the settings-changed event on the output port if it is disabled. 2014-05-12 12:33:32 +0200 Josep Torra * omx/gstomxaudiosink.c: omxaudiosink: implement _delay only in the RaspberryPI Make code implementation conditionally built for RaspberryPI because OMX_IndexConfigAudioRenderingLatency seems to be a Broadcom extension. On other targets the query position might not be accurate without implementing _delay appropriatelly. 2014-05-12 08:56:15 +0200 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Correctly scale nTickCount by OMX_TICKS_PER_SECOND 2014-05-10 22:48:23 +0200 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Drain encoder on NULL buffer and don't drain on flushing 2014-05-10 22:47:56 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Set nTickCount based on the buffer's duration instead of something wrong 2014-05-10 22:47:21 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Set nTickCount to the whole duration of the buffer instead of a wrong calculation 2014-05-10 22:46:51 +0200 Sebastian Dröge * omx/gstomxaudiosink.c: omxaudiosink: Fix format string compiler warnings 2014-04-04 14:11:58 +0200 Josep Torra * config/rpi/gstomx.conf: * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxanalogaudiosink.c: * omx/gstomxanalogaudiosink.h: * omx/gstomxaudiosink.c: * omx/gstomxaudiosink.h: * omx/gstomxhdmiaudiosink.c: * omx/gstomxhdmiaudiosink.h: omxaudiosink: Implements OpenMAX based audio sinks Provides omxanalogaudiosink and omxhdmiaudiosink elements on the Raspberry PI. - omxanalogaudiosink is capable to render raw mono or stereo audio through the jack output. - omxhdmiaudiosink is capable to render raw audio up to 8 channels and transmit ac3/dts(IEC 61937) through the HDMI output. - sinks provide a clock derived from rendered samples - sinks support the GstStreamVolume interface by implementing the volume and mute properties. https://bugzilla.gnome.org/show_bug.cgi?id=728962 2014-05-03 10:17:35 +0200 Sebastian Dröge * common: Automatic update of common submodule From bcb1518 to 211fa5f 2014-04-29 15:16:16 +0100 Julien Isorce * omx/gstomxvideodec.c: omxvideodec: can negotiate caps with memory:EGLImage feature when using EGLImage allocator Previously when using gst EGLImage allocator the caps was video/x-raw, format=RGBA instead of video/x-raw(memory:EGLImage), format=RGBA Kepp previous behavior in case negotiation fails with caps feature. It means it will still have a chance to use EGLImage even if the feature is not in the caps. https://bugzilla.gnome.org/show_bug.cgi?id=729196 2014-04-23 09:57:48 +0200 Aurélien Zanelli * omx/gstomxvp8dec.h: omxvp8dec: fix typo in GST_TYPE_OMX_VP8_DEC define https://bugzilla.gnome.org/show_bug.cgi?id=728774 2014-04-16 11:00:55 +0200 Aurélien Zanelli * omx/gstomxvideodec.c: omxvideodec: don't unref caps before logging field from it https://bugzilla.gnome.org/show_bug.cgi?id=728322 2014-04-15 17:30:13 +0100 Julien Isorce * Makefile.am: * configure.ac: example: disable testegl since libgstegl has been removed As decided in bug #703343 Not compatible with the new libgstgl API. A portage has been started, attachment 272800. https://bugzilla.gnome.org/show_bug.cgi?id=703343 2014-04-15 17:11:08 +0100 Julien Isorce * omx/gstomxvideodec.c: omxvideodec: use new libgstgl API since libgstegl has been removed There is no point to retrieve a ref/unref type instead of an EGLDisplay directly. It's like for EGLImage. https://bugzilla.gnome.org/show_bug.cgi?id=703343 2014-04-15 17:06:38 +0100 Julien Isorce * configure.ac: * examples/Makefile.am: * omx/Makefile.am: * omx/gstomxvideodec.c: configure.ac: check for libgstgl since libgstegl has been removed https://bugzilla.gnome.org/show_bug.cgi?id=703343 2014-04-09 18:52:16 +0200 Aurélien Zanelli * omx/gstomxbufferpool.c: * omx/gstomxvideodec.c: omxvideodec: add support of more color format Add support for ABGR, ARGB, RGB16, BGR16, YUY2, UYVY, YVYU, GRAY8 and NV16 color format. 2014-04-09 18:51:57 +0200 Aurélien Zanelli * omx/gstomxvideodec.c: omxvideodec: simplify color format conversion in fill_buffer function 2014-04-09 18:51:41 +0200 Aurélien Zanelli * omx/gstomxbufferpool.c: omxbufferpool: make video stride and offset calculation easier It will be easier to support more color format. 2014-04-09 18:51:12 +0200 Aurélien Zanelli * omx/gstomxvideo.c: * omx/gstomxvideo.h: * omx/gstomxvideodec.c: omx: add an helper to convert OMX color format to GStreamer color format 2014-03-10 17:43:50 +0100 Josep Torra * examples/egl/testegl.c: * omx/gstomxvideodec.c: omxvideodec: Implement pipeline draining to support adaptive scenarios When draining due a format change also drain the pipeline to reclaim back all buffers. https://bugzilla.gnome.org/show_bug.cgi?id=726107 2014-03-27 13:57:32 +0100 Josep Torra * examples/egl/testegl.c: examples: fix several memory leaks in the testegl example Ensure to call to image_data_free in order to release GPU resources. Also ensure to destroy EGLImage and GLTexture from proper thread/context. https://bugzilla.gnome.org/show_bug.cgi?id=726107 2014-03-25 17:16:31 +0000 Julien Isorce * examples/egl/testegl.c: examples: keep a ref on the buffer instead of the memory Like in eglglessink https://bugzilla.gnome.org/show_bug.cgi?id=726107 2014-03-07 20:08:05 +0100 Josep Torra * omx/gstomxvideodec.c: omxvideodec: fixes race condition during seeks Acording 6.1.3 Seek Event Sequence in the OpenMAX IL 1.1.2 spec document in order to flush the component it needs to be in paused state. https://bugzilla.gnome.org/show_bug.cgi?id=726038 2014-01-29 18:31:26 +0000 Julien Isorce * omx/gstomxvideodec.c: omxvideodec: use flush because reset is deprecated https://bugzilla.gnome.org/show_bug.cgi?id=726038 2014-01-27 17:03:50 +0000 Julien Isorce * omx/gstomxvideodec.c: omxvideodec: populate the most downstream output port on reset Make seeking work when using egl_render component https://bugzilla.gnome.org/show_bug.cgi?id=726038 2014-03-24 17:49:59 +0100 Josep Torra * omx/gstomxbufferpool.c: omxbufferpool: return buffers to the pool instead of freeing them We have to return the buffers back to the pool in when stopping to not mess with the GstBufferPool accounting. The OMX buffers will be freed when those won't be in charge of the pool in the chained up call to 'stop'. Fixes segfaults on finalize and pool not being properly deactivated. https://bugzilla.gnome.org/show_bug.cgi?id=726337 2014-03-19 12:12:49 +0100 Christian König * omx/gstomxvideodec.c: omxvideodec: add missing unlock in the error path Signed-off-by: Christian König https://bugzilla.gnome.org/show_bug.cgi?id=726958 2014-03-18 23:36:59 +0100 Michal Lazo * omx/gstomxh264enc.c: * omx/gstomxh264enc.h: fix filemode 2014-03-17 09:57:11 +0000 Julien Isorce * omx/gstomxbufferpool.c: omxbufferpool: fix memory leak if used on output port When using GstOMXBufferPool on an output port, it internally uses a GPtrArray to manage the GstBuffers instead of the default queue from the GstBufferPool base class. In this case GstBufferPool::default_free_buffer is not called when the pool is stopped. Because the queue is empty. So explicitely call gst_omx_buffer_pool_free_buffer on each buffer contained in the GPtrArray. https://bugzilla.gnome.org/show_bug.cgi?id=726337 2014-03-16 17:32:05 +0100 Sebastian Dröge * omx/gstomxh264enc.c: omxh264enc: Fix compiler warnings 2014-03-16 17:19:08 +0100 Michal Lazo * omx/gstomxh264enc.c: * omx/gstomxh264enc.h: omxh264enc: IDR interval, SPS and PPS headers for rpi https://bugzilla.gnome.org/show_bug.cgi?id=720031 2014-03-13 14:26:58 +0100 Christian König * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxvideo.c: omxvideo: fix debug category initialisation https://bugzilla.gnome.org/show_bug.cgi?id=726024 2014-03-13 19:04:47 +0100 Christian König * omx/gstomxbufferpool.h: omxbufferpool: add proper type definitions https://bugzilla.gnome.org/show_bug.cgi?id=726325 2014-03-02 10:30:04 +0100 Christian König * omx/gstomx.c: omx: consolidate message waiting code Add a wait_message helper function and remove all those duplicated code. https://bugzilla.gnome.org/show_bug.cgi?id=725493 2014-03-12 12:48:12 +0100 Sebastian Dröge * omx/gstomxvideo.c: omx: Copy old copyright notice into the new file 2014-03-12 12:47:34 +0100 Sebastian Dröge * omx/gstomxvideo.c: * omx/gstomxvideo.h: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Rename function from _4_ to _for_ for clarity 2014-03-03 16:15:24 +0100 Christian König * omx/Makefile.am: * omx/gstomxvideo.c: * omx/gstomxvideo.h: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omxvideo: start sharing more code between video decoder and encoder Identical functionality spread of two different components. We can't use a common base class because of different inheritance, but let's try to share the code anyway. https://bugzilla.gnome.org/show_bug.cgi?id=726024 2014-03-12 12:43:49 +0100 Sebastian Dröge * examples/egl/Makefile.am: examples: Only build RPi EGL example if RPi was chosen as target 2014-03-12 12:42:23 +0100 Sebastian Dröge * omx/gstomxbufferpool.h: omxbufferpool: Fix header include guard 2014-03-05 11:41:02 +0100 Christian König * omx/Makefile.am: * omx/gstomxbufferpool.c: * omx/gstomxbufferpool.h: * omx/gstomxvideodec.c: omxvideodec: separate the buffer pool from the decoder https://bugzilla.gnome.org/show_bug.cgi?id=726025 2014-03-04 17:41:20 +0100 Christian König * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxvideodec.c: omx: simplify tunnel functions Specifying the component is error prone and unnecessary. https://bugzilla.gnome.org/show_bug.cgi?id=726021 2014-03-07 17:12:24 +0100 Christian König * omx/gstomxvideodec.c: omxvideodec: fix memory leak in gst_omx_video_dec_allocate_output_buffers https://bugzilla.gnome.org/show_bug.cgi?id=725907 2014-03-07 13:18:49 +0100 Christian König * omx/gstomxvideodec.c: omxvideodec: fix memory leak gst_omx_video_dec_negotiate https://bugzilla.gnome.org/show_bug.cgi?id=725907 2014-03-05 18:54:05 +0100 Christian König * omx/gstomxvideoenc.c: omxvideoenc: fix a memory leak in gst_omx_video_enc_getcaps https://bugzilla.gnome.org/show_bug.cgi?id=725826 2014-03-05 17:43:33 +0100 Josep Torra * Makefile.am: Makefile.am: build examples There's no reason to not build the examples now that are ported to 1.x. 2014-03-05 17:25:09 +0100 Josep Torra * examples/egl/testegl.c: examples: avoid a clashing name with the recently added GstEGLImagePool Fixes build with current master. 2013-09-05 03:41:10 -0600 Christian König * omx/gstomxvideoenc.c: omxvideoenc: simplify _find_nearest_frame Just the same as we did with the decoder. Also give the function a gst_omx_video_enc prefix to distinct it from the decoder function. https://bugzilla.gnome.org/show_bug.cgi?id=724236 2013-09-05 02:23:39 -0600 Christian König * omx/gstomxvideodec.c: omxvideodec: simplify _find_nearest_frame No need to make it more complicated and error prone than necessary. Also give the function a gst_omx_video_dec prefix to distinct it from the encoder function. https://bugzilla.gnome.org/show_bug.cgi?id=724236 2013-09-05 02:05:52 -0600 Christian König * omx/gstomxvideodec.c: omxvideodec: remove dead code This code doesn't seems to be used for quite a while, remove it before it starts to rot. https://bugzilla.gnome.org/show_bug.cgi?id=724236 2014-03-01 22:28:24 +0100 Christian König * omx/gstomx.c: omx: fix two serious message handling bugs Waiting for the next message if we already got one is nonsense and can lead to lockups. https://bugzilla.gnome.org/show_bug.cgi?id=725468 2014-03-01 18:49:41 +0100 Christian König * omx/gstomxvideoenc.c: omxvideoenc: fix startup race condition The reset function shouldn't start the src pad loop if it wasn't started before. Signed-off-by: Christian König 2014-03-01 18:48:17 +0100 Christian König * omx/gstomxvideodec.c: omxvideodec: fix startup race condition The reset function shouldn't start the src pad loop if it wasn't started before. Signed-off-by: Christian König 2014-02-28 09:36:13 +0100 Sebastian Dröge * common: Automatic update of common submodule From fe1672e to bcb1518 2014-02-26 22:15:00 +0100 Stefan Sauer * common: Automatic update of common submodule From 1a07da9 to fe1672e 2014-01-30 10:45:18 +0100 Edward Hervey * common: Automatic update of common submodule From d48bed3 to 1a07da9 2014-01-25 17:44:14 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Don't handle FLUSHING and NOT_LINKED as errors Also don't stop the task on NOT_LINKED. We're not a demuxer. 2013-12-22 22:35:31 +0000 Tim-Philipp Müller * common: Automatic update of common submodule From dbedaa0 to d48bed3 2013-11-05 11:22:02 +0000 Tim-Philipp Müller * common: Automatic update of common submodule From 865aa20 to dbedaa0 2013-09-28 13:32:37 +0200 Josep Torra * examples/egl/testegl.c: examples: simplify the thread synchronization code Make everithing more simple and fix the races conditions remaining in the previous approaches. 2013-09-25 19:17:17 +0200 Sebastian Dröge * config/rpi/gstomx.conf: rpi: The WMV/VC1 decoder can only do WMV9 and VC1, no older versions 2013-09-24 18:34:42 +0100 Tim-Philipp Müller * common: Automatic update of common submodule From 6b03ba7 to 865aa20 2013-09-24 18:48:24 +0200 Josep Torra * examples/egl/testegl.c: examples: fix another race condition Fix a race condition that caused randome deadlocks on EOS. 2013-09-20 17:19:53 +0200 Josep Torra * config/rpi/gstomx.conf: rpi: fix a copy paste error in the config file 2013-09-20 17:09:52 +0200 Josep Torra * examples/egl/testegl.c: examples: fix a race condition when seeking Fixes a race condition that caused pipeline deadlock during seeks. 2013-09-20 10:38:12 +0200 Josep Torra * examples/egl/testegl.c: examples: display QoS statistics 2013-09-20 09:34:37 +0200 Josep Torra * examples/egl/testegl.c: examples: use dedicated thread for rendering the scene Produces smother animation and prevents dropping frames due busy mainloop. 2013-09-20 08:25:21 +0200 Josep Torra * examples/egl/testegl.c: examples: don't force an specific audio sink Let playbin2 choose the audiosink available in the system. 2013-09-20 08:19:48 +0200 Josep Torra * examples/egl/Makefile.am: examples: drop remnants of initial appsink attempt 2013-09-20 16:18:18 +0200 Edward Hervey * common: Automatic update of common submodule From b613661 to 6b03ba7 2013-09-19 18:45:36 +0100 Tim-Philipp Müller * common: Automatic update of common submodule From 74a6857 to b613661 2013-09-19 17:38:30 +0100 Tim-Philipp Müller * common: Automatic update of common submodule From 01a7a46 to 74a6857 2013-08-20 16:00:07 +0100 Tim-Philipp Müller * omx/gstomx.c: * omx/gstomxvideodec.c: omx: don't use the 'z' modifier to print size_t gcc will warn in some cases even if the size of the type is exactly that of size_t on the platform. https://bugzilla.gnome.org/show_bug.cgi?id=699008 2013-07-01 15:48:47 +0200 Roman Arutyunyan * omx/gstomxvideoenc.c: gstomxvideoenc: Set bitrate in setcaps Otherwise it gets lost whenever we configure new caps https://bugzilla.gnome.org/show_bug.cgi?id=698049 2013-06-30 18:17:05 +0700 Ilya Smelykh * examples/egl/testegl.c: examples: enable audio in testegl example 2013-06-12 09:38:22 +0200 Sebastian Dröge * configure.ac: configure: Allow build without gstreamer-egl 2013-06-07 12:39:18 +0700 Ilya Smelykh * examples/egl/Makefile.am: * examples/egl/testegl.c: examples: testegl example port to 1.x https://bugzilla.gnome.org/show_bug.cgi?id=701706 2013-06-05 15:17:16 +0200 Sebastian Dröge * common: Automatic update of common submodule From 098c0d7 to 01a7a46 2013-05-20 12:06:34 +0200 Josep Torra * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Take lock on EOS to update the flow return value Fixes "GThread-ERROR **: file gthread-posix.c: line 171 (g_mutex_free_posix_impl): error 'Device or resource busy' during 'pthread_mutex_destroy ((pthread_mutex_t *) mutex)'" in _finalize. 2013-05-15 10:54:12 +0200 Sebastian Dröge * common: Automatic update of common submodule From 5edcd85 to 098c0d7 2013-04-11 17:35:19 +0200 Josep Torra * Makefile.am: * configure.ac: * examples/Makefile.am: * examples/egl/Makefile.am: * examples/egl/cube_texture_and_coords.h: * examples/egl/testegl.c: examples: add an example aplication based OpenGL ES + EGL Application that shows how to integrate playbin with an OpenGL ES scene through EGL. Renders a video on the surfaces of an animated cube. The code is not ported to 1.x so it's not built by default. 2013-05-10 12:25:07 +0200 Josep Torra * omx/gstomxvideodec.c: omxvideodec: Redesign video size change reconfiguration code Ensure stop the decoder before clossing the tunnel. 2013-05-06 16:25:27 +0200 Sebastian Dröge * Makefile.am: Makefile.am: Add -I common/m4 This allows autoreconf to work correctly and automatic regeneration of autotools files if something changed. 2013-05-06 19:03:59 +0530 jitendra * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Add pads based on element type This allows to later add sources and sink that only have a srcpad or sinkpad. https://bugzilla.gnome.org/show_bug.cgi?id=699754 2013-04-27 02:50:25 +0200 Carlos Rafael Giani * omx/gstomx.c: omx: fixed type error in printf call %zu expects size_t https://bugzilla.gnome.org/show_bug.cgi?id=699008 2013-04-08 17:26:16 +0100 Tim-Philipp Müller * configure.ac: * omx/Makefile.am: * omx/gstomxvideodec.c: Check for gstreamer-egl And don't use if not available. https://bugzilla.gnome.org/show_bug.cgi?id=697574 2013-04-23 09:53:18 +0100 Tim-Philipp Müller * configure.ac: configure: error out if no OMX target has been set explicitly with --with-omx-target=x Avoids people building for e.g. the Raspberry Pi and then wondering why things don't work as expected (since structs are packed differently there). 2013-04-22 23:55:03 +0100 Tim-Philipp Müller * common: Automatic update of common submodule From 3cb3d3c to 5edcd85 2013-04-18 22:07:28 +0000 Tim-Philipp Müller * omx/gstomx.c: * omx/gstomxaudioenc.c: * omx/gstomxh263enc.c: * omx/gstomxh264enc.c: * omx/gstomxmpeg4videoenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: more printf format fixes Fix printf formats again, so that gst-omx compiles warning- free on the Raspberry Pi as well. Unfortunately OMX_UINT32 maybe be typedefed to uint32_t or unsigned long, which doesn't work well with our debugging printf format strings, so just use %u for those and cast to guint. 2013-04-18 16:40:06 +0200 Josep Torra * omx/gstomx.c: omx: fixes unused variable 'comp' when GStreamer is built without debug 2013-04-18 16:03:56 +0200 Josep Torra * omx/gstomxvideodec.c: omxvideodec: don't use 'self->dec_out_port' anymore and use just 'port' Fixes some criticals. 2013-04-18 15:21:32 +0200 Josep Torra * omx/gstomxvideodec.c: omxvideodec: fixes 'port' may be used uninitialized in this function 2013-04-18 12:03:31 +0200 Josep Torra * omx/gstomxvideodec.c: omxvideodec: silence warnings building for RPI related to 'vcos_*' 2013-04-18 11:19:52 +0200 Josep Torra * omx/gstomxvideodec.c: omxvideodec: Use new type from libgstvideo 2013-04-16 14:50:49 +0530 jitendra * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Disable output port before transition to idle state https://bugzilla.gnome.org/show_bug.cgi?id=698109 2012-10-24 12:19:41 +0200 Sebastian Dröge * configure.ac: gst: Add better support for static plugins 2013-04-14 17:57:34 +0100 Tim-Philipp Müller * common: Automatic update of common submodule From aed87ae to 3cb3d3c 2013-04-12 17:58:30 +0100 Tim-Philipp Müller * configure.ac: configure: add --disable-fatal-warnings for disabling -Werror 2013-04-09 21:02:09 +0200 Stefan Sauer * common: Automatic update of common submodule From 04c7a1e to aed87ae 2013-04-08 17:02:32 +0100 Tim-Philipp Müller * omx/gstomx.c: * omx/gstomxaudioenc.c: * omx/gstomxh263enc.c: * omx/gstomxh264enc.c: * omx/gstomxmpeg4videoenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: fix printf formats in debug messages OMX_U32 is typedefed to an unsigned long, OMX_TICKS to a 64-bit integer. 2013-04-08 16:52:19 +0200 Josep Torra * omx/gstomxvideodec.c: omxvideodec: use the correct printf format in a debug message 2013-04-08 16:31:33 +0200 Josep Torra * omx/gstomxvideodec.c: omxvideodec: use the correct OMX_IndexParam value Fixes playback is not smooth in the EGL path. 2013-04-05 13:45:24 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Don't use API that is not in master yet It's not really needed here yet, will be needed in future versions 2013-02-25 11:55:04 +0100 Sebastian Dröge * configure.ac: * omx/Makefile.am: * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omxvideodec: Add support for egl_render on RPi 2013-03-22 19:26:54 +0000 Tim-Philipp Müller * configure.ac: Back to development 2013-03-22 19:23:14 +0000 Tim-Philipp Müller * omx/gstomxh263enc.c: * omx/gstomxh264enc.c: * omx/gstomxmpeg4videoenc.c: omx: fix compiler warnings when compiling with -DG_DISABLE_ASSERT As we do for releases. Fixes 'variable may be used uninitialized' warnings. === release 1.0.0 === 2013-03-22 17:16:33 +0100 Sebastian Dröge * AUTHORS: * ChangeLog: * Makefile.am: * NEWS: * RELEASE: * configure.ac: * gst-omx.doap: Release 1.0.0 2013-03-19 16:40:09 +0000 Tim-Philipp Müller * omx/gstomxtheoradec.h: * omx/gstomxvp8dec.h: omx: fix typo in copyright headers 2013-03-19 13:46:33 +0100 Sebastian Dröge * config/rpi/gstomx.conf: rpi: Fix commit that added the VC1 decoder 2013-03-19 13:27:35 +0100 Sebastian Dröge * config/rpi/gstomx.conf: * omx/gstomxh263dec.c: * omx/gstomxh264dec.c: * omx/gstomxmjpegdec.c: * omx/gstomxmpeg2videodec.c: * omx/gstomxmpeg4videodec.c: * omx/gstomxtheoradec.c: * omx/gstomxvideodec.c: * omx/gstomxvp8dec.c: * omx/gstomxwmvdec.c: omx: Add more constraints to the default sink template caps 2013-03-19 13:10:39 +0100 Sebastian Dröge * config/rpi/gstomx.conf: rpi: Add VC1/WMV3 decoder WMV2 and WMV1 (aka WMV 1-8) are not supported by RPi. 2013-03-19 12:59:20 +0100 Sebastian Dröge * config/rpi/gstomx.conf: rpi: Add MJPEG decoder 2013-03-19 12:56:50 +0100 Sebastian Dröge * config/rpi/gstomx.conf: rpi: Add VP8 decoder 2013-03-19 12:55:09 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Set ENDOFFRAME flag for the end of frames 2013-03-19 12:28:50 +0100 Sebastian Dröge * config/rpi/gstomx.conf: rpi: Add Theora decoder to the config 2013-03-19 09:36:18 +0100 Sebastian Dröge * configure.ac: * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxtheoradec.c: * omx/gstomxtheoradec.h: omx: Add Theora decoder 2013-03-18 16:43:24 +0100 Sebastian Dröge * omx/gstomx.c: omx: Remove additional comma 2013-03-18 16:34:21 +0100 Sebastian Dröge * config/rpi/gstomx.conf: * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxmpeg2dec.h: * omx/gstomxmpeg2videodec.c: * omx/gstomxmpeg2videodec.h: omx: Rename MPEG2 decoder for consistency everywhere 2013-03-18 16:30:40 +0100 Sebastian Dröge * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxmjpegdec.c: * omx/gstomxmjpegdec.h: omx: Add MJPEG decoder support 2013-03-18 16:06:54 +0100 Sebastian Dröge * configure.ac: * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxvp8dec.c: * omx/gstomxvp8dec.h: omx: Add VP8 decoder support 2013-03-18 15:44:23 +0100 Sebastian Dröge * config/rpi/gstomx.conf: rpi: Add h263 decoder and rename MPEG2 decoder for consistency 2013-03-16 13:20:27 +0000 Tim-Philipp Müller * omx/gstomxmpeg2dec.c: omxmpeg2dec: mpeg-2 decoder should be able to handle mpeg-1 too https://bugzilla.gnome.org/show_bug.cgi?id=695879 2013-03-16 10:13:06 +0100 Josep Torra * omx/gstomx.c: omx: minor stylistic change for consistency with other similar code 2013-03-16 10:00:24 +0100 Josep Torra * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Clarify that loop task is also paused in EOS 2013-03-16 09:59:01 +0100 Josep Torra * omx/gstomxvideoenc.c: omxvideoenec: Don't forget propagate flow return value upstream 2013-03-15 13:16:39 +0000 Tim-Philipp Müller * omx/gstomx.c: omx: improve debug logging some more 2013-03-15 14:09:45 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Make sure that the first frame we pass to OpenMAX is a sync frame 2013-03-15 11:46:34 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Stop output port task after draining 2013-03-15 10:58:58 +0100 Sebastian Dröge * omx/gstomx.c: omx: Reset EOS flag in more places 2013-03-15 10:38:43 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Deallocate output buffers with the right function 2013-03-15 01:06:05 +0000 Tim-Philipp Müller * omx/gstomx.c: * omx/gstomx.h: omx: log commands as strings Makes logs easier to read. 2013-03-15 00:47:47 +0000 Tim-Philipp Müller * omx/gstomx.c: * omx/gstomx.h: omx: log states as strings 2013-03-15 00:28:02 +0000 Tim-Philipp Müller * omx/gstomx.c: * omx/gstomx.h: omx: log component name in debug messages Useful when we have more different components active at the same time. 2013-03-15 09:51:42 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Don't interpolate timestamps We will get exactly one frame per input buffer and assigning timestamps between frames if more than one OMX buffer is required per frame easily confuses timestamp tracking in OMX. 2013-03-15 09:32:42 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Give the codec_data the timestamp of the first frame and no duration 2013-03-14 17:31:17 +0100 Sebastian Dröge * config/rpi/gstomx.conf: omx: The MPEG4 encoder is not available on RPi and probably never will 2013-03-14 17:26:30 +0100 Sebastian Dröge * omx/gstomx.c: omx: Reset some more buffer fields as required 2013-03-14 17:01:08 +0100 Sebastian Dröge * config/rpi/gstomx.conf: * omx/gstomx.c: omx: The hack to disable usage of EOS buffers is not necessary anymore on RPi 2013-03-14 17:00:12 +0100 Sebastian Dröge * omx/gstomx.c: omx: Reset the flags for output ports when releasing a buffer, not for input ports 2013-03-14 15:03:02 +0100 Sebastian Dröge * omx/gstomxh263enc.c: * omx/gstomxh264enc.c: * omx/gstomxmpeg4videoenc.c: omx: Only unref caps after usage of its fields 2013-03-14 14:51:32 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Simplify bufferpool implementation 2013-03-13 13:23:35 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Improve min/max buffer counts handling 2013-03-14 12:49:42 +0100 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Handle the OMX_EventBufferFlag to detect EOS too 2013-03-13 10:29:23 +0100 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: omx: Mark OpenMAX buffers as EGLImage if they contain one Needs special handling in some places, e.g. because nFilledLen will always be 0. 2013-03-13 10:21:49 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Properly check the nVersion field 2013-03-13 09:34:43 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: RPi returns garbage for OMX_IndexParamVideoBitrate, work around that 2013-03-12 20:02:53 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Make sure to always get the right buffer 2013-03-12 19:35:39 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Make sure the buffer is released to the pool if it's not the one we wanted 2013-03-12 19:17:08 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Drop too late frames instead of finishing them 2013-03-12 19:16:46 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omx: Release buffers to the correct port 2013-03-13 09:37:02 +0100 Sebastian Dröge * omx/gstomx.c: omx: Always load the OpenMAX IL cores with G_MODULE_BIND_LOCAL 2013-03-12 18:20:22 +0100 Sebastian Dröge * omx/gstomx.c: omx: Lazy-load symbols of libbcm_host.so It exports eglIntOpenMAXILDoneMarker(), which is also exported by libopenmaxil.so... but we need the version from libopenmaxil.so as the other one is just a stub. 2013-03-11 13:59:15 +0100 Sebastian Dröge * omx/gstomxaacenc.c: * omx/gstomxh263enc.c: * omx/gstomxmpeg4videoenc.c: omx: Don't set profile/level in other encoders if downstream caps don't specify any 2013-03-11 13:49:38 +0100 Sebastian Dröge * omx/gstomxh264enc.c: omxh264enc: If caps specify no profile/level use the component's defaults 2013-03-11 13:45:04 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Always allocate output buffers from the loop function 2013-03-11 13:12:57 +0100 Sebastian Dröge * omx/gstomxh264enc.c: omxh264enc: The h264 encoders are supposed to output byte-stream/au 2013-03-11 11:47:42 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Wait until the Executing state is reached before passing buffers to the component 2013-03-11 10:39:25 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Don't provide buffers to downstream This only works reliable if we have a way to tell downstream to release all our buffers for reconfiguration. 2013-03-11 10:29:44 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Disable output port when setting a new format 2013-03-11 10:29:30 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Disable output port when setting a new format 2013-03-11 10:22:07 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Disable output port when setting a new format Based on a patch by Josep Torra 2013-03-11 10:04:10 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Catch errors when releasing buffers to a port and handle them 2013-03-10 12:09:23 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Use the correct video codec state when filling an input buffer 2013-03-10 12:05:50 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Store correct input state 2013-03-10 11:27:34 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Allocate output buffers as early as possible 2013-03-10 11:01:57 +0100 Sebastian Dröge * omx/gstomx.c: omx: Log unknown events 2013-03-09 14:14:40 +0100 Josep Torra * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Fix deadlock in encoders and add explainatory comments. 2013-03-09 13:27:08 +0100 Josep Torra * omx/gstomxvideodec.c: omxvideodec: fix printf format identifier 2013-03-09 13:07:59 +0100 Josep Torra * omx/gstomxvideodec.c: omx: Minor changes on debuging info 2013-03-09 13:00:33 +0100 Josep Torra * omx/gstomxvideodec.c: omxvideodec: avoid a deadlock 2013-03-08 15:56:40 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Don't forget to populate output port 2013-03-08 15:11:27 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Flush and stop srcpad when configuring new caps 2013-03-07 17:40:21 +0100 Sebastian Dröge * config/rpi/gstomx.conf: * omx/gstomx.c: Revert "omx: use no-component-reconfigure hack on the Raspberry PI" This reverts commit e123b2089f69a413241f30a2428ea6edd8f231e7. It's not required anymore after the fix from the last commit. 2013-03-07 17:38:40 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Only negotiate a color format with downstream on the initial caps 2013-03-07 17:29:43 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Make sure the output port is disabled while we allocate buffers 2013-03-07 17:27:05 +0100 Sebastian Dröge * omx/gstomx.c: omx: Also wait for disabled output ports to be reconfigured 2013-03-07 14:10:12 +0100 Sebastian Dröge * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omxvideodec: Add buffer pool for sharing OpenMAX memory with downstream 2013-03-07 11:11:58 +0100 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Add timeout to the flush operation and move buffer populating to a separate function 2013-03-06 17:33:23 +0100 Sebastian Dröge * config/rpi/gstomx.conf: * omx/gstomx.c: * omx/gstomx.h: omx: Remove min buffer count hack for RPi again It's not necessary anymore 2013-03-06 17:05:51 +0100 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Do number of buffers configuration explicitely 2013-03-07 11:24:54 +0100 Josep Torra * omx/gstomxvideodec.c: omxvideodec: fixes reconfiguration Avoid having fixed fields from previous caps on reconfiguration. 2013-03-07 11:02:39 +0100 Josep Torra * config/rpi/gstomx.conf: * omx/gstomx.c: omx: use no-component-reconfigure hack on the Raspberry PI 2013-03-07 00:03:28 +0000 Tim-Philipp Müller * common: Automatic update of common submodule From 2de221c to 04c7a1e 2013-03-01 15:32:47 +0100 Josep Torra * omx/gstomxvideoenc.h: omxvideoenc: drop unused data member 2013-03-01 12:23:54 +0100 Sebastian Dröge * omx/gstomxh263enc.c: * omx/gstomxh264enc.c: * omx/gstomxmpeg4videoenc.c: omxvideoenc: And set it actually on the right port 2013-03-01 12:18:08 +0100 Sebastian Dröge * omx/gstomxh263enc.c: * omx/gstomxh264enc.c: * omx/gstomxmpeg4videoenc.c: omxvideoenc: Set the coding type in the subclasses to the specific codec 2013-03-01 11:49:53 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: gst_omx_port_update_port_definition() returns a OMX_ERRORTYPE, not a gboolean 2013-03-01 11:44:17 +0100 Sebastian Dröge * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omxvideo{dec,enc}: Don't use the input state if it wasn't set yet 2013-03-01 11:25:04 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Only enable the output port after we know the output format 2013-03-01 11:24:56 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Only enable the output port after we know the output format 2013-02-28 17:02:31 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Only enable the output port after we know the output format 2013-03-01 11:18:18 +0100 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: omx: Handle errors more gracefully 2013-02-28 15:48:53 +0100 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxaudioenc.c: * omx/gstomxh263dec.c: * omx/gstomxh264dec.c: * omx/gstomxmpeg2dec.c: * omx/gstomxmpeg4videodec.c: * omx/gstomxvideodec.c: * omx/gstomxwmvdec.c: omx: Return the OMX_ERRORTYPE from gst_omx_port_update_port_definition 2013-02-28 15:37:53 +0100 Sebastian Dröge * omx/gstomx.c: omx: Return port definition update errors 2013-02-28 13:57:43 +0100 Sebastian Dröge * config/rpi/gstomx.conf: * omx/gstomx.c: * omx/gstomx.h: omx: Add hack for RPi for the minimum number of buffers required for a port The value in the port definition is invalid and the initial actual buffer count should be used. 2013-02-28 13:26:56 +0100 Sebastian Dröge * omx/gstomx.c: omx: Always tell the component about the right number of buffers that we're going to allocate 2013-02-28 13:07:58 +0100 Sebastian Dröge * omx/gstomx.c: omx: Invert assertion to let it express what was intended 2013-02-28 11:19:07 +0100 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Add API for allocating a specific number of buffers and using EGLImages or buffers allocated elsewhere 2013-02-27 16:55:16 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Refactor code flow a bit if output port settings have changed 2013-02-27 15:49:56 +0100 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Clean up port settings change handling 2013-02-27 11:30:14 +0100 Josep Torra * omx/gstomxvideodec.c: omxvideodec: initialize param structure before using it 2013-02-27 10:21:39 +0100 Josep Torra * omx/gstomxvideoenc.c: omxvideoenc: prevent a NULL pointer access 2013-02-26 17:25:49 +0100 Josep Torra * omx/gstomxvideodec.c: omxvideodec: prevent a NULL pointer access 2013-02-25 13:11:16 +0100 Sebastian Dröge * omx/gstomx.c: omx: Fix deadlock during reconfiguration 2013-02-25 12:38:27 +0100 Sebastian Dröge * omx/gstomx.c: * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Auto-detect the port indizes if possible 2013-02-25 11:42:38 +0100 Sebastian Dröge * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Refactor querying of component supported caps into its own function 2013-02-25 10:41:12 +0100 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Refactor waiting for buffers to be released by the component to a separate function 2013-01-11 17:44:13 +0000 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: omx: Add methods to set up and close a tunnel between components 2013-02-25 09:15:53 +0100 Sebastian Dröge * omx/gstomxaacenc.c: * omx/gstomxaudioenc.c: * omx/gstomxaudioenc.h: omxaudioenc: Rename component variable 2013-02-25 09:15:46 +0100 Sebastian Dröge * omx/gstomxh263enc.c: * omx/gstomxh264enc.c: * omx/gstomxmpeg4videoenc.c: * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: omxvideoenc: Rename component variable 2013-02-25 09:12:22 +0100 Sebastian Dröge * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omxvideodec: Rename component variable 2013-02-22 16:27:33 +0100 Josep Torra * omx/gstomxvideoenc.c: omxvideoenc: remove duplicated line 2013-02-22 10:42:08 +0100 Sebastian Dröge * omx/gstomx.c: Retry loading libbcm_host.so without an absolute path if that failed 2013-02-21 20:32:42 +0100 Sebastian Dröge * config/bellagio/Makefile.am: Add missing file from last commit 2013-02-21 11:01:28 +0100 Sebastian Dröge * config/Makefile.am: * config/bellagio/gstomx.conf: * configure.ac: * omx/Makefile.am: Add OpenMAX IL target for Bellagio Not tested since a very long time though. 2013-02-21 10:59:29 +0100 Sebastian Dröge * configure.ac: * omx/Makefile.am: Allow using external OpenMAX IL headers 2013-02-21 10:14:12 +0100 Sebastian Dröge * .gitignore: Update .gitignore 2013-02-21 10:13:16 +0100 Sebastian Dröge * config/Makefile.am: * config/rpi/Makefile.am: * config/rpi/gstomx.conf: * configure.ac: Install the RPI config when the RPI target is selected 2013-02-21 10:08:07 +0100 Sebastian Dröge * omx/gstomx.c: Set default hacks for the RPI target and always initialize bcm_host 2013-02-21 10:05:37 +0100 Sebastian Dröge * configure.ac: Add configure parameter for setting the OpenMAX IL target 2013-02-12 11:55:39 +0100 Sebastian Dröge * omx/gstomx.c: omx: Add FIXME for the future 2013-02-12 11:49:21 +0100 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxaudioenc.c: * omx/gstomxaudioenc.h: * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: omx: Some minor refactoring and cleanup 2013-02-12 11:45:40 +0100 Sebastian Dröge * omx/gstomx.c: omx: Don't access the port's buffers array if it wasn't allocated yet 2013-02-12 11:44:40 +0100 Sebastian Dröge * omx/gstomx.c: omx: Mark an array as const 2013-02-12 11:41:43 +0100 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Split enabling/disabling of port into sending the command and waiting for it This allows to do anything necessary after sending the command to actually let it finish 2013-02-12 11:37:38 +0100 Sebastian Dröge * omx/gstomx.c: omx: Flushing is also allowed in Paused state 2013-02-12 11:28:36 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Set stride, slice height and buffer size 2013-02-12 11:09:30 +0100 Sebastian Dröge * config/raspberry-pi.conf: config: Add h264 and mpeg2 encoders to the raspberry pi config Not completely working yet though. 2013-02-12 11:03:32 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Properly negotiate OMX color format with the component 2013-02-12 10:53:24 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Implement getcaps() vfunc 2013-01-29 21:32:53 +0000 Tim-Philipp Müller * configure.ac: configure: use 1.0 gstconfig.h to detect disabled subsystems Update unused configure check for GStreamer core subsystem features from 0.10 to 1.0. 2013-01-28 20:44:41 +0100 Stefan Sauer * common: Automatic update of common submodule From a942293 to 2de221c 2013-01-24 14:02:36 +0100 Julian Scheel * config/raspberry-pi.conf: * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxmpeg2dec.c: * omx/gstomxmpeg2dec.h: omx: add mpeg2 video decoder This adds a decoder class for mpeg2, as well as an extended configuration for raspberry pi. https://bugzilla.gnome.org/show_bug.cgi?id=692446 Signed-off-by: Julian Scheel 2013-01-18 16:47:04 +0100 Sebastian Dröge * omx/gstomx.c: omx: Minimize the time when the messages lock is held Fixes a deadlock if any OMX functions are called when the messages are handled. Thanks to Nicolas Dufresne for noticing. 2013-01-18 15:28:20 +0000 Tim-Philipp Müller * omx/gstomx.c: omx: improve debug message when we can't find the config file Mention where we looked for the config file. 2013-01-18 12:34:38 +0000 Tim-Philipp Müller * configure.ac: build: fix autogen.sh with automake 1.13 AM_CONFIG_HEADER -> AC_CONFIG_HEADERS 2013-01-17 18:07:41 +0100 Sebastian Dröge * omx/gstomx.h: * omx/gstomxaudioenc.h: * omx/gstomxvideodec.h: * omx/gstomxvideoenc.h: omx: Fix includes to properly work with the 1.0 releases 2013-01-15 15:08:28 +0000 Tim-Philipp Müller * common: Automatic update of common submodule From a72faea to a942293 2013-01-15 14:34:45 +0100 Sebastian Dröge * omx/gstomx.c: omx: Update port definition when changing some port setting 2013-01-14 11:41:57 +0100 Sebastian Dröge * omx/Makefile.am: * omx/gstomx.c: omx: Rename from libgstopenmax.so to ligstomx.so for consistency 2013-01-11 15:32:22 +0000 Nicolas Dufresne * omx/gstomx.c: omx: Add a method to send message 2013-01-11 15:44:38 +0100 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: omx: Atomic ops are not required anymore for the reconfiguration 2013-01-11 12:52:10 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Fix some memory leaks and suboptimal locking 2013-01-11 12:34:04 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Don't forget to unmap frame in error cases 2013-01-11 12:29:20 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Fix copying of the video frames to the OMX buffers 2013-01-11 12:24:13 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Fix copying of the video frames from the OMX buffers 2013-01-10 14:44:33 +0100 Sebastian Dröge * omx/Makefile.am: * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxaudioenc.c: * omx/gstomxrecmutex.c: * omx/gstomxrecmutex.h: omx: Implement new approach for locking that should solve all deadlocks on RPi No mutex is locked while calling any OpenMAX functions anymore and everything from the OpenMAX callbacks is inserted into a message queue and handled from outside the callbacks. Also there's only a single mutex and condition variable per component now for handling anything from OpenMAX callbacks and a single mutex for keeping our component/port state sane. 2012-12-20 19:30:38 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Set the OMX buffer nFilledLength field properly 2012-12-20 18:48:21 +0100 Sebastian Dröge * omx/gstomxrecmutex.c: * omx/gstomxrecmutex.h: omxrecmutex: Fix another race condition when two threads are trying to lock for recursion at the same time 2012-12-20 18:16:43 +0100 Sebastian Dröge * omx/gstomxrecmutex.c: * omx/gstomxrecmutex.h: omxrecmutex: Fix yet another race condition that resulted in deadlocks 2012-12-20 17:46:36 +0100 Sebastian Dröge * omx/gstomx.c: * omx/gstomxrecmutex.c: * omx/gstomxrecmutex.h: omx: Fix another race condition in the recursive mutex Between lock() and begin_recursion() it was possible for another thread to try to do a recursive_lock(). This would block because the mutex was already locked(), but not ready for recursive locking yet. unlock() would never happen in the original thread because it was waiting for the other thread to finish first. Happened on the Raspberry Pi. 2012-12-20 14:45:18 +0100 Sebastian Dröge * omx/gstomxrecmutex.c: * omx/gstomxrecmutex.h: omxrecmutex: Fix a small race condition when unlocking a non-recursive lock 2012-12-20 12:30:05 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Fix ununsed variable compiler warning 2012-12-20 12:27:47 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: No need to start the srcpad task in ::start() already It will be started properly after the caps are set. 2012-12-20 12:23:49 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: OMX_ErrorNoMore is no error and just means we ended iteration 2012-12-20 12:20:31 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Improve debug output 2012-12-20 12:02:30 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Don't forget to free a GList 2012-12-20 11:56:29 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Map OMX_COLOR_FormatYUV420PackedPlanar to I420 too This is used on the Raspberry Pi. 2012-12-20 11:55:36 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: During negotiation of the output format make sure we use the correct OpenMAX format 2012-12-20 11:42:17 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: If negotiation fails this could also mean that the component can't do it at this point yet 2012-12-20 11:40:13 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Improve format negotiation a bit Don't leak caps and make sure to fixate caps. 2012-12-19 13:05:28 +0100 Sebastian Dröge * omx/gstomx.h: omx: Also initialize nStep field of the OMX structures 2012-12-19 13:03:37 +0100 Sebastian Dröge * omx/gstomx.h: omx: Initialize struct version with the OMX version we compiled with 2012-12-19 12:44:31 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Extract data from the input buffer, not the codec data 2012-12-19 12:19:12 +0100 Sebastian Dröge * omx/gstomx.c: * tools/listcomponents.c: omx: Use has_suffix() instead of has_prefix() for the Broadcom hack 2012-12-19 12:08:35 +0100 Sebastian Dröge * Makefile.am: * configure.ac: * tools/Makefile.am: * tools/listcomponents.c: tools: Add tool to list all components and their roles 2012-12-19 11:31:51 +0100 Sebastian Dröge * omx/gstomx.c: omx: Add hack to load and initialize libbcm_host.so Needed on the Raspberry Pi. Patch based on a patch by George Kiagiadakis 2012-12-19 11:22:16 +0100 Sebastian Dröge * configure.ac: * omx/gstomx.h: configure: Add configure option to pack OpenMAX structures This is required to set to 4 for the Raspberry Pi for example. 2012-12-19 11:07:44 +0100 Sebastian Dröge * configure.ac: configure: Require GStreamer 1.0.0 2012-04-20 17:13:52 +0300 George Kiagiadakis * omx/gstomx.h: omx: Initialize structures to version 1.1.2 2012-12-19 09:51:22 +0000 Sebastian Dröge * Makefile.am: * config/Makefile.am: * config/raspberry-pi.conf: * configure.ac: config: Add raspberry-pi configuration in a different directory 2012-05-20 20:11:59 +0300 George Kiagiadakis * omx/gstomx-raspberry.conf: raspberry: Add a gstomx.conf for the Raspberry Pi 2012-12-12 17:45:39 +0000 Sebastian Dröge * omx/gstomx.h: * omx/gstomxvideoenc.h: omx: Fix some compilation errors caused by circular includes 2012-11-19 11:29:44 +0000 Tim-Philipp Müller * common: Automatic update of common submodule From 6bb6951 to a72faea 2012-11-12 15:14:09 +0100 Sebastian Dröge * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Fix refcount problem with frames being dropped because of decoder bugs 2012-11-12 11:29:48 +0100 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxaudioenc.c: * omx/gstomxaudioenc.h: * omx/gstomxrecmutex.c: * omx/gstomxrecmutex.h: * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: omx: Update to new GLib thread API 2012-10-22 14:34:53 +0200 Sebastian Dröge * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Use open/close vfuncs 2012-10-22 14:28:04 +0200 Sebastian Dröge * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Handle video meta correctly 2012-06-20 13:11:58 +0100 Sebastian Dröge * omx/Makefile.am: * omx/gstbasevideocodec.c: * omx/gstbasevideocodec.h: * omx/gstbasevideodecoder.c: * omx/gstbasevideodecoder.h: * omx/gstbasevideoencoder.c: * omx/gstbasevideoencoder.h: * omx/gstbasevideoutils.c: * omx/gstbasevideoutils.h: * omx/gstomxh263dec.c: * omx/gstomxh263enc.c: * omx/gstomxh264dec.c: * omx/gstomxh264enc.c: * omx/gstomxmpeg4videodec.c: * omx/gstomxmpeg4videoenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: * omx/gstomxwmvdec.c: omx: Port to video base classes from -base 2012-10-17 17:57:43 +0100 Tim-Philipp Müller * omx/gstomxaacenc.c: * omx/gstomxh263dec.c: * omx/gstomxh263enc.c: * omx/gstomxh264dec.c: * omx/gstomxh264enc.c: * omx/gstomxmpeg4videodec.c: * omx/gstomxmpeg4videoenc.c: * omx/gstomxwmvdec.c: omx: gst_element_class_set_details_simple() -> set_static_metadata() 2012-10-06 15:01:11 +0100 Tim-Philipp Müller * common: Automatic update of common submodule From 6c0b52c to 6bb6951 2012-09-22 16:10:38 +0100 Tim-Philipp Müller * common: Automatic update of common submodule From 4f962f7 to 6c0b52c 2012-06-21 20:22:13 +0300 George Kiagiadakis * omx/gstomx.c: omx: fix debug statement 2012-06-21 20:21:03 +0300 George Kiagiadakis * omx/gstomx.c: omx: use recursive_lock inside set_last_error(), since this function may be called from an event handler 2012-08-22 13:31:59 +0200 Stefan Sauer * common: Automatic update of common submodule From 668acee to 4f962f7 2012-08-05 16:42:43 +0100 Tim-Philipp Müller * common: Automatic update of common submodule From 94ccf4c to 668acee 2012-08-03 19:32:13 +0100 Tim-Philipp Müller * omx/gstomx.c: omx: fix plugin name for new GST_PLUGIN_DEFINE API 2012-07-23 08:47:32 +0200 Sebastian Dröge * common: Automatic update of common submodule From 98e386f to 94ccf4c 2012-07-10 09:57:09 +0200 Sebastian Dröge * omx/gstbasevideodecoder.c: omx: Update for allocation query API changes 2012-06-20 11:09:13 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Fix compilation after gst_pad_start_task() API changes 2012-06-08 15:06:35 +0200 Edward Hervey * common: Automatic update of common submodule From 03a0e57 to 98e386f 2012-06-06 18:20:18 +0200 Edward Hervey * common: Automatic update of common submodule From 1fab359 to 03a0e57 2012-06-01 10:30:27 +0200 Edward Hervey * common: Automatic update of common submodule From f1b5a96 to 1fab359 2012-05-31 13:10:33 +0200 Sebastian Dröge * common: Automatic update of common submodule From 92b7266 to f1b5a96 2012-05-30 12:47:59 +0200 Sebastian Dröge * common: Automatic update of common submodule From ec1c4a8 to 92b7266 2012-05-30 11:26:30 +0200 Sebastian Dröge * common: Automatic update of common submodule From 3429ba6 to ec1c4a8 2012-05-13 15:58:10 +0200 Sebastian Dröge * common: Automatic update of common submodule From dc70203 to 3429ba6 2012-05-08 16:13:32 +0300 George Kiagiadakis * omx/gstomx.c: omx: Fix spelling mistake found by lintian: s/Seperate/Separate/ 2012-04-30 23:58:43 +0300 George Kiagiadakis * omx/Makefile.am: * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxaudioenc.c: * omx/gstomxrecmutex.c: * omx/gstomxrecmutex.h: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: Implement a new custom recursive mutex type and fix locking in callbacks so that in-context calls are allowed. According to the OMX specification, implementations are allowed to call callbacks in the context of their function calls. However, our callbacks take locks and this causes deadlocks if the unerlying OMX implementation uses this kind of in-context calls. A solution to the problem would be a recursive mutex. However, a normal recursive mutex does not fix the problem because it is not guaranteed that the callbacks are called from the same thread. What we see in Broadcom's implementation for example is: - OMX_Foo is called - OMX_Foo waits on a condition - A callback is executed in a different thread - When the callback returns, its calling function signals the condition that OMX_Foo waits on - OMX_Foo wakes up and returns The solution I came up with here is to take a second lock inside the callback, but only if recursion is expected to happen. Therefore, all calls to OMX functions are guarded by calls to gst_omx_rec_mutex_begin_recursion() / _end_recursion(), which effectively tells the mutex that at this point we want to allow calls to _recursive_lock() to succeed, although we are still holding the master lock. 2012-04-20 14:51:34 +0000 George Kiagiadakis * omx/gstomx.c: * omx/gstomx.h: omx: Add hack to disable setting roles to components. Conflicts: omx/gstomx.c 2012-04-30 23:20:24 +0000 George Kiagiadakis * omx/gstomx.h: * omx/gstomxvideodec.c: omxvideodec: Implement no-empty-eos-buffer hack, as in omxvideoenc. Conflicts: omx/gstomxvideodec.c 2012-04-30 23:19:55 +0000 George Kiagiadakis * omx/gstomxvideodec.c: omxvideodec: Fix coding style in the drain-may-not-return hack code 2012-04-25 19:03:48 +0530 Arun Raghavan * omx/gstomx.c: omx: Fix trivial debug print bug 2012-04-25 19:01:32 +0530 Arun Raghavan * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxvideodec.c: omxvideodec: Add hack for Ducati components not returning from drain This happens on the Galaxy Nexus, and causes the pipeline to hang waiting endlessly for a drain. The hack replaces the wait with a wait + 500ms timeout. 2012-04-25 16:35:40 +0530 Arun Raghavan * omx/gstomx.c: omx: Fix deadlock between ending a flush and the event handler gst_omx_port_set_flushing() calls OMX_FillThisBuffer at the end of a flush without releasing the port lock, and this can cause a deadlock with the EventHandler. This patches fixes this by dropping the lock for the duration of the fill buffer call. 2012-04-24 15:41:38 +0200 Sebastian Dröge * omx/gstbasevideodecoder.c: * omx/gstbasevideoencoder.c: omx: Update video encoder/decoder base classes from gst-plugins-bad 2012-04-16 09:16:10 +0200 Sebastian Dröge * configure.ac: configure: Modernize autotools setup a bit Also we now only create tar.bz2 and tar.xz tarballs. 2012-04-16 09:12:37 +0200 Sebastian Dröge * common: Automatic update of common submodule 2012-04-16 08:34:56 +0200 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Use gst_buffer_extract() to copy the input buffer data to the OpenMAX buffer 2012-04-13 17:16:42 -0400 Alessandro Decina * omx/Makefile.am: Fix relative/absolute path glitch Signed-off-by: Reynaldo H. Verdejo Pinochet 2012-04-12 15:57:32 -0400 Olivier Crête * common: * configure.ac: * omx/Makefile.am: * omx/gstbasevideocodec.c: * omx/gstbasevideocodec.h: * omx/gstbasevideodecoder.c: * omx/gstbasevideodecoder.h: * omx/gstbasevideoencoder.c: * omx/gstbasevideoencoder.h: * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxaacenc.c: * omx/gstomxaudioenc.c: * omx/gstomxaudioenc.h: * omx/gstomxh263dec.c: * omx/gstomxh263enc.c: * omx/gstomxh264dec.c: * omx/gstomxh264enc.c: * omx/gstomxmpeg4videodec.c: * omx/gstomxmpeg4videoenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: * omx/gstomxwmvdec.c: Port to Gst 0.11 2012-01-18 16:53:16 -0300 Reynaldo H. Verdejo Pinochet * Android.mk: * omx/Makefile.am: Enable building with Android's buildsystem This change adds prelimary buildsystem hooks to build gst-omx with the Android buildsystem. Like the rest of GStreamer's Android hooks, the process relies on the availability of androgenizer. A tool developed by Collabora to automatically generate Android.mk files from within the auto* setup. Androgenizer is currently available at: http://cgit.collabora.com/git/user/derek/androgenizer.git/ 2011-12-13 10:17:41 +0100 Sebastian Dröge * omx/gstbasevideocodec.c: basevideocodec: Don't use G_TYPE_REGISTER_BOXED() yet This would require GLib 2.26. 2011-12-14 10:09:34 +0100 Jonas Larsson * omx/gstomxaudioenc.c: omxaudioenc: Add hack for encoder components that don't allow empty EOS buffers 2011-12-14 10:07:29 +0100 Jonas Larsson * omx/gstomxvideoenc.c: omxvideoenc: Fix deadlock when using the EOS hack 2011-12-12 14:26:48 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Remove workaround for basevideocodec bug 2011-12-12 14:26:34 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Remove workaround for basevideocodec bug 2011-12-05 17:57:01 +0000 Matej Knopp * omx/gstbasevideocodec.c: * omx/gstbasevideocodec.h: * omx/gstbasevideodecoder.c: * omx/gstbasevideoencoder.c: basevideo: Make GstVideoFrame a reference counted boxed object ...and also clear all existing frames when resetting the decoder or encoder. 2011-12-09 12:17:29 +0100 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxvideoenc.c: omx: Add hack for encoder components that don't allow empty EOS buffers 2011-12-09 10:21:47 +0100 Dake Gu * omx/gstomxaacenc.c: omxaacenc: Generate and set codec_data on the caps for raw AAC 2011-10-31 11:36:06 +0100 Alessandro Decina * omx/gstbasevideoencoder.c: basevideoencoder: handle failures in start() and stop() 2011-08-26 10:50:38 +0100 Vincent Penquerc'h * omx/gstbasevideoencoder.c: basevideoenc: do not try to calculate latency from an unknown framerate It'll divide by zero, and latency is unknown for an unknown framerate. Fixes an assert in the schroenc test. https://bugzilla.gnome.org/show_bug.cgi?id=657419 2011-12-08 11:50:49 +0100 Sebastian Dröge * omx/gstbasevideoencoder.c: basevideoencoder: Only make the header buffer metadata writable, not the buffer 2011-12-08 10:18:36 +0100 Sebastian Dröge * omx/gstbasevideoencoder.c: basevideoencoder: Fix handling of force-keyunit events 2011-12-06 13:28:41 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Don't forward EOS events immediately but let all other events be handled by the base class Previously this logic was inversed, which did not make any sense at all. 2011-12-06 12:47:25 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: * omx/gstomxaudioenc.h: omxaudioenc: Use correct timestamp, duration and filled length for the EOS buffers 2011-12-06 12:47:12 +0100 Sebastian Dröge * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omxvideodec: Use correct timestamp, duration and filled length for the EOS buffers 2011-12-06 12:46:51 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: omxvideoenc: Use correct timestamp, duration and filled length for the EOS buffers 2011-12-05 13:18:09 +0100 Sebastian Dröge * omx/gstomx.c: omx: Improve debugging of buffer handling 2011-12-05 08:12:48 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Drop EOS events in ::finish() The event will be forwarded downstream from the srcpad loop function after the last buffer was generated by the component. Forwarding it after ::finish() will use the sinkpad streaming thread and does not guarantee that the encoder is completely drained. 2011-12-01 16:20:36 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Properly drop frames due to QoS Instead of finishing them they should be passed to drop(), which will then send QoS messages. 2011-11-29 12:21:32 +0100 Jonas Larsson * omx/gstomxh264enc.c: omxh264enc: Add support for resending headers after a forced-keyframe 2011-11-29 12:12:33 +0100 Sebastian Dröge * omx/gstbasevideocodec.h: * omx/gstbasevideoencoder.c: basevideoencoder: Pass the all-headers field of the force-key-unit event to the subclass 2011-11-29 12:12:04 +0100 Sebastian Dröge * omx/gstbasevideoencoder.c: * omx/gstbasevideoencoder.h: basevideoencoder: Implement full support for the new force-key-unit event Including support for the running-time and count fields. 2011-11-29 09:31:11 +0100 Sebastian Dröge * omx/gstbasevideoencoder.c: basevideoencoder: Use new force-keyunit event API from gst-plugins-base 2011-11-29 09:18:19 +0100 Sebastian Dröge * omx/gstbasevideoencoder.c: * omx/gstbasevideoencoder.h: basevideoencoder: Adjusting padding is not required for -bad libraries 2011-11-28 19:48:01 +0100 Sebastian Dröge * omx/gstbasevideoencoder.h: basevideoencoder: Move some fields to the private part of the instance struct 2011-11-28 19:36:56 +0100 Sebastian Dröge * omx/gstbasevideoencoder.c: basevideoencoder: Make headers metadata writable before pushing downstream The timestamp, duration, etc of the headers has to be changed. 2011-11-28 19:35:40 +0100 Sebastian Dröge * omx/gstbasevideoencoder.c: * omx/gstbasevideoencoder.h: basevideoencoder: Push the downstream force-keyframe event after the next keyframe Even if the corresponding GstVideoFrame doesn't have the is_sync_point flag set. 2011-11-28 19:29:13 +0100 Sebastian Dröge * omx/gstbasevideoencoder.c: * omx/gstbasevideoencoder.h: basevideoencoder: Don't push an upstream force-keyunit event downstream 2011-11-25 11:48:08 +0100 Jonas Larsson * omx/gstbasevideoencoder.c: * omx/gstbasevideoencoder.h: basevideoencoder: Add initial support for the all-headers field of the force-keyframe event See bug #607742. 2011-11-25 11:37:39 +0000 Tim-Philipp Müller * omx/gstbasevideodecoder.c: basevideodecoder: some more debug logging 2011-11-23 20:03:32 +0000 Tim-Philipp Müller * omx/gstbasevideodecoder.c: * omx/gstbasevideodecoder.h: basevideodecoder: add API to drop a frame and post a QoS message on the bus https://bugzilla.gnome.org/show_bug.cgi?id=640017 API: gst_base_video_decoder_drop_frame() 2011-11-22 23:04:49 +0000 Tim-Philipp Müller * omx/gstbasevideodecoder.c: docs: fix comment in gst_base_video_decoder_get_max_decode_time() docs 2011-11-22 19:57:07 +0000 Tim-Philipp Müller * omx/gstbasevideodecoder.c: basevideodecoder: fix weird event list handling Get rid of weird code that copies a list manually, taking ownership of the elements and then frees the old list. Instead, just take over the old list entirely. (If the intent was to reverse the list, one could use g_list_reverse() instead). Then, push events in the list out from last to first (since they were prepended as they came in) instead of just pushing out the last in the list and leaking the others. 2011-11-25 11:31:58 +0100 Sebastian Dröge * configure.ac: * omx/Makefile.am: * omx/gstbaseaudiodecoder.c: * omx/gstbaseaudiodecoder.h: * omx/gstbaseaudioencoder.c: * omx/gstbaseaudioencoder.h: * omx/gstbaseaudioutils.c: * omx/gstbaseaudioutils.h: * omx/gstomxaacenc.c: * omx/gstomxaudioenc.c: * omx/gstomxaudioenc.h: omxaudioenc: Use audio base classes from gst-plugins-base instead of having our own copies 2011-11-18 10:00:31 -0800 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: First set ports to flushing before waiting for the srcpad streaming thread to finish 2011-11-18 09:59:43 -0800 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: First set ports to flushing before waiting for the srcpad streaming thread to finish 2011-11-18 09:58:58 -0800 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: First set ports to flushing before waiting for the srcpad streaming thread to finish 2011-11-17 14:38:54 -0800 Sebastian Dröge * omx/gstomx.c: omx: Only disabling of a port is like flushing, enabling is like unflushing 2011-11-17 13:33:35 -0800 Sebastian Dröge * omx/gstomx.c: omx: Enabling/disabling a port is also like flushing The component returns all buffers to us and shouldn't get any new buffers passed anymore. 2011-11-17 11:26:33 -0800 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Signal the drain GCond even if downstream returned an error 2011-11-17 11:26:20 -0800 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Signal the drain GCond even if downstream returned an error 2011-11-17 11:25:52 -0800 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Signal the drain GCond even if downstream returned an error 2011-11-17 10:34:19 -0800 Sebastian Dröge * omx/gstbasevideoencoder.c: basevideoencoder: Only call ::reset once in READY->PAUSED 2011-11-17 10:19:35 -0800 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Shutdown component in PAUSED->READY and deallocate buffers 2011-11-17 10:19:30 -0800 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Shutdown component in PAUSED->READY and deallocate buffers 2011-11-17 10:19:10 -0800 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Shutdown component in PAUSED->READY and deallocate buffers 2011-11-16 12:02:08 -0800 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Set force_keyframe to FALSE after handling it There's no reason why the base class should forward the event further downstream if we already handled it and will insert a keyframe. 2011-11-16 11:21:25 -0800 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Always push buffers downstream, even if we didn't find a corresponding GstVideoFrame 2011-11-15 09:47:55 -0800 Sebastian Dröge * omx/gstomx.c: omx: Fix debug level for flushing in wrong state from ERROR to DEBUG It's not really an error and doesn't matter at all if flush is called when the component is not running. 2011-11-15 08:40:07 -0800 Sebastian Dröge * omx/gstomxh264enc.c: omxh264enc: Detect bytestream stream format and don't put SPS/PPS into the caps for this format 2011-11-15 08:28:32 -0800 Sebastian Dröge * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: omxvideoenc: Add vfunc for handling the output frames This can be used by subclasses to override the buffer flags or to handle some frames differently than the default behaviour. 2011-11-14 12:50:26 -0800 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Don't release buffers twice if dropping because of QoS 2011-11-14 09:13:06 -0800 Sebastian Dröge * omx/gstomx.c: omx: Add XXX to the nOffset reset hack comment for QCOM 2011-11-10 15:18:08 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Make srcpad caps setting threadsafe 2011-11-10 15:17:56 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Make srcpad caps setting threadsafe 2011-11-10 15:17:41 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Make srcpad caps setting threadsafe 2011-11-10 15:10:14 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Make the srcpad task and the sinkpad streaming thread handling threadsafe 2011-11-10 15:03:05 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Always flush the ports and make sure no processing is happening in ::flush This fixes a race condition that happened when seeking very often in a short period of time. 2011-11-10 15:02:22 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Always flush the ports and make sure no processing is happening in ::reset This fixes a race condition that happened when seeking very often in a short period of time. 2011-11-10 15:01:36 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Fix minor race condition when draining after upstream signalled EOS 2011-11-10 14:56:19 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Improve EOS handling If downstream return UNEXPECTED we should still signal the drain cond because nothing will trigger this again later. 2011-11-10 14:56:11 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Improve EOS handling If downstream return UNEXPECTED we should still signal the drain cond because nothing will trigger this again later. 2011-11-10 14:54:33 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Improve debugging of EOS and draining 2011-11-10 14:54:17 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Improve debugging of EOS and draining 2011-11-10 14:51:06 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Log if acquiring buffer for EOS failed 2011-11-10 14:42:13 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: The component is not started in READY 2011-11-10 14:39:40 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: No need to signal the drain cond when going from READY to PAUSED Also the component is not started in READY 2011-11-10 14:40:56 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: No need to signal the drain cond when going from READY to PAUSED Also the component is not started in READY. 2011-11-09 15:46:02 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Always flush the ports and make sure no processing is happening in ::reset This fixes a race condition that happened when seeking very often in a short period of time. 2011-11-09 15:45:20 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Fix minor race condition when draining after upstream signalled EOS 2011-11-09 15:44:11 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Improve EOS handling If downstream return UNEXPECTED we should still signal the drain cond because nothing will trigger this again later. 2011-11-09 15:43:32 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Improve debugging of EOS and draining 2011-11-09 15:42:46 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: The component is not started already when going from READY to PAUSED 2011-11-09 15:42:13 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: No need to signal the drain cond when going from READY to PAUSED 2011-11-09 15:41:02 +0100 Sebastian Dröge * omx/gstomx.c: omx: Always reset buffer flags for output ports, even in flushing/error state 2011-11-09 09:00:57 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Improve debugging in case of QoS-related frame drops 2011-11-08 12:46:31 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Release the video codec stream lock before acquiring an input buffer Otherwise the srcpad task might block on this lock and no buffers ever become available again. 2011-11-08 12:45:16 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Release the audio encoder stream lock before acquiring an input buffer Otherwise the srcpad task might block on this lock and no buffers ever become available again. 2011-11-08 12:42:58 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Release the video codec stream lock before acquiring an input buffer Otherwise the srcpad task might block on this lock and no buffers ever become available again. 2011-11-08 11:07:01 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: * omx/gstomxaudioenc.h: omxaudioenc: Don't try to drain the component after EOS And don't send EOS twice in any case. This most likely will cause the component to not output it again and is not necessary anyway. 2011-11-08 11:03:29 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: omxvideoenc: Don't try to drain the component after EOS And don't send EOS twice in any case. This most likely will cause the component to not output it again and is not necessary anyway. 2011-11-08 10:46:36 +0100 Sebastian Dröge * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omxvideodec: Don't try to drain the component after EOS And don't send EOS twice in any case. This most likely will cause the component to not output it again and is not necessary anyway. 2011-11-08 09:09:28 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Implement dropping of too late frames via QoS 2011-11-08 08:31:58 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Minor code refactoring 2011-11-08 08:31:43 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Minor code refactoring 2011-11-08 08:31:32 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Make sure to always release buffers back to OMX 2011-11-08 08:24:19 +0100 Sebastian Dröge * omx/gstomx.c: omx: Also properly release buffers when in error state 2011-11-08 08:22:08 +0100 Jonas Larsson * omx/gstomx.c: omx: Properly release buffers during flushing We can't pass them back to OMX_FillThisBuffer() or OMX_EmptyThisBuffer() but instead of doing nothing we have to put them back into our queue. Otherwise the buffer is leaked and we will have too few buffers in the future. 2011-11-07 14:00:47 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Free pending frames after draining component 2011-11-07 14:00:35 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Free pending frames after draining the component 2011-11-07 11:07:01 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Make handling and usage of the base video codec frames threadsafe 2011-11-07 11:05:29 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Fix deadlock between srcpad stream lock and ::reset() 2011-11-07 11:04:27 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideoenc: Make handling and usage of the base video codec frames threadsafe 2011-11-07 10:58:44 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Free all pending frames after draining the component 2011-11-07 10:58:24 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Always free all pending frames when caps changes require reconfiguration 2011-11-04 09:43:48 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Only drain the component a single time and only after processing started 2011-11-04 09:43:32 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Only drain the component a single time and only after processing started 2011-11-04 09:43:12 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Only drain the component a single time and only after processing started 2011-11-04 09:04:16 +0100 Sebastian Dröge * omx/gstomx.c: omx: Reset buffer flags to 0 after it was consumed by the component or the element Some implementations don't reset the flags and the standard is not really clear on the expected behaviour. Let's just always reset the flags as they're not valid at this point anymore. 2011-11-02 13:50:14 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: omxvideoenc: Better handling of encoder parameters Only set them if necessary and allow to use the component defaults. 2011-11-02 13:22:50 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Make unsupported bitrate/quantizer settings less fatal 2011-11-02 10:39:50 +0100 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: If no stride was set for the OMX output port assume GStreamer stride This is not really correct but there's nothing else we could do. 2011-11-02 10:39:10 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: If no stride was set for the OMX input port assume GStreamer stride This is not really correct but there's nothing else we could do. 2011-11-01 16:46:09 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: * omx/gstomxaudioenc.h: omxaudioenc: Implement draining of the component and use it This makes sure that all buffers are encoded and pushed downstream before flushing the ports and losing some buffers. 2011-11-01 16:41:46 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: omxvideoenc: Implement draining of the component and use it This makes sure that all buffers are encoded and pushed downstream before flushing the ports and losing some buffers. 2011-11-01 16:08:59 +0100 Sebastian Dröge * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omxvideodec: Implement draining of the component and use it This makes sure that all buffers are decoded and pushed downstream before flushing the ports and losing some buffers. 2011-10-20 14:32:40 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Fix deadlock if ::reset is called before finding the corresponding frame of a decoded buffer 2011-11-01 15:10:12 +0100 Sebastian Dröge * omx/gstomxaudioenc.c: * omx/gstomxaudioenc.h: * omx/gstomxvideoenc.h: omxaudioenc: Forward downstream flow returns to upstream 2011-11-01 15:10:01 +0100 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Forward downstream flow returns to upstream 2011-11-01 13:58:38 +0100 Sebastian Dröge * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omxvideodec: Forward downstream flow returns to upstream 2011-10-25 14:23:38 +0200 Sebastian Dröge * README: omx: Add minimal README file 2011-10-20 15:21:07 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Fix deadlock caused by calling reset while the loop function does something with the base video codec stream lock 2011-10-20 15:20:47 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Fix deadlock caused by calling reset while the loop function does something with the base video codec stream lock 2011-10-20 14:30:38 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Move locking at the correct place 2011-10-14 10:27:47 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: omx: Remove QCOM hack to reset nOffset in EmptyBufferDone This is now done in a generic way that does not require any hacks because it will work without any side effects on any OMX implementation. 2011-10-14 10:26:00 +0200 Sebastian Dröge * omx/gstomx.c: omx: Reset nOffset to 0 in EmptyBufferDone if nFilledLen is 0 Some OMX implementations don't reset nOffset when the complete buffer is emptied but instead only reset nFilledLen. We reset nOffset to 0 if nFilledLen == 0, which is safe to do because the offset *must* be 0 if the buffer is not filled at all. Seen in QCOM's OMX implementation. 2011-10-04 10:56:33 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: If one parameter/configuration is not supported don't skip the next 2011-10-03 09:12:44 +0200 Sebastian Dröge * omx/gstomxh264dec.c: omxh264dec: Require stream-format=byte-stream Other stream-formats are unlikely to be supported by OMX components. 2011-09-29 10:37:32 +0200 Sebastian Dröge * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omxvideodec: Add API for subclasses to prepare/convert frames 2011-09-27 15:08:54 +0200 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Switch to Idle first and wait before switching to Loaded and deallocating buffers Allocating buffers before the Idle state is reached can lead to crashes. 2011-09-27 15:08:44 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Switch to Idle first and wait before switching to Loaded and deallocating buffers Allocating buffers before the Idle state is reached can lead to crashes. 2011-09-27 15:05:19 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Switch to Idle first and wait before switching to Loaded and deallocating buffers Allocating buffers before the Idle state is reached can lead to crashes. 2011-09-27 14:15:06 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxvideodec.c: omxvideodec: New hack for QCOM to recreate the component instead of reconfiguring it on caps changes 2011-09-27 12:13:56 +0200 Sebastian Dröge * omx/gstomx.c: omx: Change a g_assert() into a GST_WARNING_OBJECT() 2011-09-26 13:04:18 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: omx: Add hack for Qualcomm's OMX implementation to manually reset nOffset in EmptyBufferDone 2011-09-23 17:02:49 +0200 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Add a check to prevent a zero-sized OMX buffer 2011-09-23 17:02:19 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Add some more checks for correct OMX buffer sizes 2011-09-23 15:53:49 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Add some more checks for OMX buffer sizes 2011-09-14 10:15:38 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxaudioenc.c: * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omx: Wait until the Executing state is reached before calling OMX_FillThisBuffer() This correctly works around the QCOM race condition that happens when calling FTB after setting the new state and before reaching it. 2011-09-02 14:43:43 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Negotiate video format with downstream and what the component claims to support 2011-08-25 19:56:58 +0100 Vincent Penquerc'h * omx/gstbasevideoencoder.c: basevideoencoder: fix element leak and this concludes an hour of yelling at the bloody test failing, only to track down the problem not being in the test. https://bugzilla.gnome.org/show_bug.cgi?id=657368 2011-08-19 09:20:39 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Release basevideocodec stream lock while waiting for a buffer This prevents deadlocks if no empty input buffers are available and releasing input buffers requires the loop function to handle some output buffers first. 2011-08-19 09:19:22 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Release basevideocodec stream lock while waiting for a buffer This prevents deadlocks if no empty input buffers are available and releasing input buffers requires the loop function to handle some output buffers first. 2011-08-18 10:24:26 +0200 Sebastian Dröge * omx/gstbasevideodecoder.c: basevideodecoder: Fix deadlock 2011-08-18 10:03:20 +0200 Sebastian Dröge * omx/gstbaseaudiodecoder.c: baseaudiodecoder: Don't take the stream lock in the seek handler This will lead to deadlocks 2011-08-18 10:02:50 +0200 Sebastian Dröge * omx/gstbasevideocodec.c: * omx/gstbasevideocodec.h: * omx/gstbasevideodecoder.c: * omx/gstbasevideoencoder.c: basevideo: Fix locking, especially if both pads have different streaming threads 2011-08-18 09:42:02 +0200 Sebastian Dröge * omx/gstbasevideodecoder.c: * omx/gstbasevideoencoder.c: basevideo: Don't call g_type_class_peek_parent() in class_init This is already done by the GObject boilerplate macro 2011-08-18 09:40:46 +0200 Sebastian Dröge * omx/gstbaseaudiodecoder.c: baseaudiodecoder: Don't call g_type_class_peek_parent() in class_init This is already done by the boilerplate macro 2011-08-18 09:34:38 +0200 Sebastian Dröge * omx/gstbaseaudiodecoder.c: * omx/gstbaseaudiodecoder.h: baseaudiodecoder: Fix thread safety issues if both pads have different streaming threads 2011-08-18 09:17:04 +0200 Sebastian Dröge * omx/gstbaseaudiodecoder.c: baseaudiodecoder: Delay sending of serialized events to finish_frame() 2011-08-17 14:33:31 +0200 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Always require at least OMX_MIN_PCMPAYLOAD_MSEC per input buffer 2011-08-17 14:28:44 +0200 Sebastian Dröge * omx/gstbaseaudioencoder.c: * omx/gstbaseaudioencoder.h: baseaudioencoder: Add support for requesting a minimum and maximum number of samples per frame This extends the special case of a fixed number of samples per frame that was supported before already. 2011-08-17 14:17:18 +0200 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Handle inbuf==NULL properly in ::handle_frame() 2011-08-17 13:04:19 +0200 Sebastian Dröge * omx/gstomxaacenc.c: omxaacenc: Implement ::get_num_samples() vfunc 2011-08-17 13:03:50 +0200 Sebastian Dröge * omx/gstomxaudioenc.c: * omx/gstomxaudioenc.h: omxaudioenc: Add vfunc to get the number of samples inside a buffer 2011-08-17 11:34:31 +0200 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Release baseaudioencoder stream lock while waiting for a buffer in ::handle_frame() This prevents deadlocks if no empty input buffers are available and releasing input buffers requires the loop function to handle some output buffers first. 2011-08-17 11:34:04 +0200 Sebastian Dröge * omx/gstbaseaudioencoder.c: * omx/gstbaseaudioencoder.h: baseaudioencoder: Fix thread safety issues if both pads have different streaming threads 2011-08-17 09:58:01 +0200 Sebastian Dröge * omx/gstbaseaudioencoder.c: baseaudioencoder: Taking the OBJECT lock in reset() is not needed 2011-08-16 11:03:24 +0200 Sebastian Dröge * omx/gstomxaudioenc.c: omxaudioenc: Remove hack that only applies to the video encoder class 2011-08-16 10:49:21 +0200 Sebastian Dröge * omx/Makefile.am: * omx/gstomx.c: * omx/gstomx.conf: * omx/gstomxaacenc.c: * omx/gstomxaacenc.h: omxaacenc: Add initial version of OpenMAX AAC encoder element 2011-08-15 15:10:04 +0200 Sebastian Dröge * omx/Makefile.am: * omx/gstomxaudioenc.c: * omx/gstomxaudioenc.h: omxaudioenc: Add initial version of audio encoder base class 2011-08-15 14:14:11 +0200 Sebastian Dröge * omx/gstbaseaudioencoder.c: baseaudioencoder: Delay sending of serialized events to finish_frame() 2011-08-15 13:06:51 +0200 Sebastian Dröge * omx/Makefile.am: * omx/gstbaseaudiodecoder.c: * omx/gstbaseaudiodecoder.h: * omx/gstbaseaudioencoder.c: * omx/gstbaseaudioencoder.h: audio: Integrate audio base classes into the build system and fixup 2011-08-15 12:56:00 +0200 Sebastian Dröge * omx/gstbaseaudiodecoder.c: * omx/gstbaseaudiodecoder.h: * omx/gstbaseaudioencoder.c: * omx/gstbaseaudioencoder.h: * omx/gstbaseaudioutils.c: * omx/gstbaseaudioutils.h: audio: Add audio decoder/encoder base classes Taken from http://cgit.collabora.com/git/user/manauw/gst-plugins-bad.git/log/?h=baseaudio 2011-08-12 12:25:03 +0200 Sebastian Dröge * omx/gstbasevideoencoder.c: basevideoencoder: Proxy the width/height/framerate/PAR constraints of downstream caps to upstream This allows to specify constraints on the compressed downstream caps by muxers or capsfilters, which will then be forwarded to upstream and allows video converters to fulfill the constraints. Code based on Mark Nauwelaerts audio encoder base class. 2011-08-12 12:13:45 +0200 Sebastian Dröge * omx/gstbasevideoencoder.h: basevideoencoder: Remove old ::getcaps() comment 2011-08-12 12:06:23 +0200 Sebastian Dröge * omx/gstbasevideoencoder.c: * omx/gstbasevideoencoder.h: basevideoencoder: Remove ::get_caps() vfunc Subclasses can set the caps more efficiently and this only caused additional indirections. 2011-08-10 10:24:21 +0200 Sebastian Dröge * omx/gstomxh263enc.c: * omx/gstomxh264enc.c: * omx/gstomxmpeg4videoenc.c: * omx/gstomxvideoenc.c: omxvideoenc: Use "video/x-raw-yuv" as sink template caps instead of strict I420 caps 2011-08-10 10:23:39 +0200 Sebastian Dröge * omx/gstomxmpeg4videodec.c: omxmpeg4videodec: Don't require width/height on sink pad caps 2011-08-10 10:11:37 +0200 Sebastian Dröge * omx/gstomxh263dec.c: * omx/gstomxh264dec.c: * omx/gstomxmpeg4videodec.c: * omx/gstomxvideodec.c: * omx/gstomxwmvdec.c: omxvideodec: Use "video/x-raw-yuv" as src template caps instead of strict I420 caps 2011-08-10 09:56:30 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Set the state back to StateLoaded even if an error happened 2011-08-10 09:49:57 +0200 Sebastian Dröge * omx/gstomx.c: omx: Don't hold any locks while calling OMX_SendCommand() It might call into one of the callbacks and lead to deadlocks, e.g. with the Qualcomm OMX implementation. 2011-08-10 09:32:01 +0200 Sebastian Dröge * omx/gstomx.c: omx: Move some code 2011-08-10 09:23:10 +0200 Sebastian Dröge * omx/gstomx.c: omx: Reset pending reconfigure output ports when changing the state from Executing to any lower state 2011-08-10 09:08:00 +0200 Sebastian Dröge * omx/gstomx.c: omx: Fix crash when setting last error after the ports were freed 2011-08-10 09:03:52 +0200 Sebastian Dröge * omx/gstomx.c: omx: Free component structure 2011-08-10 09:02:52 +0200 Sebastian Dröge * omx/gstomx.c: omx: Make component destruction safer 2011-08-10 08:53:05 +0200 Sebastian Dröge * omx/gstomx.c: omx: Set pAppPrivate of buffers to NULL when deallocating buffers This prevents usage of freed memory later if the OMX component has weird behaviour. 2011-08-10 08:52:25 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Set the state back to StateLoaded even if an error happened 2011-08-10 08:51:54 +0200 Sebastian Dröge * omx/gstomx.c: omx: Add some assertions to check if the buffer pAppPrivate is still correct 2011-08-08 13:04:30 +0200 Sebastian Dröge * omx/gstomx.h: omx: Add parenthesis at correct places in the struct init macro 2011-08-08 12:12:58 +0200 Sebastian Dröge * omx/gstomx.c: omx: Only prevent setting a higher state if the component is in an error state 2011-08-03 16:02:01 +0200 Sebastian Dröge * omx/gstbasevideodecoder.c: basevideodecoder: Use the cached video frame size instead of recalculating it 2011-08-03 15:35:01 +0200 Sebastian Dröge * omx/gstomx.c: omx: Improve debugging in param/config getter/setter wrappers 2011-08-03 13:10:33 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Don't abort if the color format is not supported but give a useful error message 2011-08-02 15:14:37 +0200 Sebastian Dröge * omx/gstomxh263enc.c: * omx/gstomxh264enc.c: * omx/gstomxmpeg4videoenc.c: * omx/gstomxvideoenc.c: omxvideoenc: Don't fail if setting the bitrate or profile is not supported by the component Also always set/get the profile, even if there are no peer caps. 2011-08-02 15:14:24 +0200 Sebastian Dröge * omx/gstbasevideoencoder.c: basevideoencoder: Make access to the list of frames threadsafe 2011-08-01 13:22:05 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: omx: Add a hacks flag for the Qualcomm 7x30 OMX_FillThisBuffer() race and make it optional 2011-07-29 13:56:59 +0200 Sebastian Dröge * omx/gstomx.c: omx: Add workaround for QCOM 7x30 race condition 2011-07-29 12:06:21 +0200 Sebastian Dröge * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxh263enc.c: * omx/gstomxh263enc.h: omxh263enc: Add H.263 encoder element 2011-07-29 11:26:39 +0200 Sebastian Dröge * omx/gstomxmpeg4videoenc.c: omxmpeg4videoenc: Add support for setting profile/level via caps 2011-07-28 14:14:45 +0200 Sebastian Dröge * omx/gstomxh264enc.c: omxh264enc: Add support for setting profile/level via caps 2011-07-28 12:58:25 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Add support for forcing the next frame to be a keyframe 2011-07-28 11:54:16 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: omxvideoenc: Add support for setting bitrate/quantization related parameters 2011-07-28 10:23:08 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: omx: Add wrapper functions for OMX_[GS]et{Config,Parameter} 2011-07-28 09:54:53 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: omx: Add macro to initialize OpenMAX structures 2011-07-28 09:08:38 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Don't output 0-byte buffers 2011-07-25 15:05:08 +0200 Sebastian Dröge * omx/gstomx.c: omx: Ensure that the pAppPrivate pointer in OMX buffers is set correctly 2011-07-25 13:19:06 +0200 Sebastian Dröge * omx/gstomxvideodec.c: * omx/gstomxvideoenc.c: omxvideo{enc,dec}: Only set/unset flushing state on ports if they were created already 2011-07-25 12:01:05 +0200 Sebastian Dröge * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxwmvdec.c: * omx/gstomxwmvdec.h: omxwmvdec: Add WMV video decoder element 2011-07-25 11:44:56 +0200 Sebastian Dröge * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxh263dec.c: * omx/gstomxh263dec.h: omxh263dec: Add H.263 decoder element 2011-07-25 11:32:51 +0200 Sebastian Dröge * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxh264enc.c: * omx/gstomxh264enc.h: omxh264enc: Add H.264 encoder element 2011-07-25 10:48:58 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Try harder to deallocate the buffers after errors happened 2011-07-25 10:47:28 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Try harder to deallocate the buffers after errors happened 2011-07-25 10:46:49 +0200 Sebastian Dröge * omx/gstomx.c: omx: Deallocate port buffers before freeing the component They should be deallocated by the caller before reaching the Loaded state but to be on the safe side we will make sure they're really deallocated here. 2011-07-21 11:15:14 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Add initial support for stride conversion 2011-07-21 10:38:26 +0200 Sebastian Dröge * omx/gstomxh264dec.c: * omx/gstomxmpeg4videodec.c: * omx/gstomxmpeg4videoenc.c: omx: Set default roles for the components if none were set from the config file 2011-07-21 10:36:19 +0200 Sebastian Dröge * omx/gstomx.c: omx: Failure to set the component role is fatal 2011-07-21 07:53:25 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Add support for setting codec_data on the srcpad caps 2011-07-21 07:44:34 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Free/drop GstVideoFrames that resulted in an empty buffer 2011-07-21 07:44:10 +0200 Sebastian Dröge * omx/gstbasevideoencoder.c: basevideoencoder: Allow finishing of frames with no src_buffer to drop/free the GstVideoFrame 2011-07-21 07:31:05 +0200 Sebastian Dröge * omx/gstomxvideoenc.c: omxvideoenc: Remove obsolete TODO comment 2011-07-20 11:09:54 +0200 Sebastian Dröge * omx/Makefile.am: * omx/gstomx.c: omx: Use libgstopenmax.so for the plugin filename and openmax for the plugin name Resolves conflicts with gst-openmax. 2011-07-20 08:34:33 +0200 Sebastian Dröge * omx/Makefile.am: * omx/gstomx.c: * omx/gstomx.conf: * omx/gstomx.h: * omx/gstomxmpeg4videoenc.c: * omx/gstomxmpeg4videoenc.h: * omx/gstomxvideoenc.c: * omx/gstomxvideoenc.h: omxvideoenc: Add video encoder base class and MPEG4 video encoder Unfortunately requires lots of hacks again to work properly with Bellagio. 2011-07-20 10:39:51 +0200 Sebastian Dröge * omx/gstbasevideoencoder.c: basevideoencoder: Only get caps from the subclass if they were not set yet by the subclass 2011-07-20 09:25:28 +0200 Sebastian Dröge * omx/gstbasevideoencoder.c: * omx/gstbasevideoencoder.h: basevideoencoder: Delay sending of serialized sink events until finish_frame() 2011-07-20 09:09:25 +0200 Sebastian Dröge * omx/gstbasevideoencoder.c: * omx/gstbasevideoencoder.h: basevideoencoder: Add ::reset vfunc and handle ::reset/::finish the same way as in the decoder 2011-07-19 12:50:43 +0200 Sebastian Dröge * omx/gstbasevideoencoder.c: basevideoencoder: Use a temporary GstVideoState until the subclass accepted the caps Also store the caps in the GstVideoState and assume a PAR of 1/1 instead of 0/1 if no PAR is specified in the caps. 2011-07-19 12:29:51 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomxvideodec.c: omx: Improve debug output a bit 2011-07-19 10:33:54 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxvideodec.c: omx: Rework port reconfiguration again and only use the Bellagio specific hacks with Bellagio We only reconfigure ports that need to be reconfigured now instead of always all ports. 2011-07-19 10:33:15 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.conf: * omx/gstomx.h: * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omx: Add infrastructure to enable special hacks for broken OpenMAX implementations 2011-07-18 13:10:49 +0200 Sebastian Dröge * omx/gstomx.c: omx: When acquiring a buffer from an input port always wait until all output ports are reconfigured 2011-07-18 08:41:20 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Add support for converting between omx and gst rowstrides 2011-07-14 10:34:09 +0200 Sebastian Dröge * omx/gstomx.c: omx: Provide all buffers to output ports after enabling them 2011-07-14 08:29:03 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Add support for NV12 / OMX_COLOR_FormatYUV420SemiPlanar 2011-07-14 07:58:41 +0200 Sebastian Dröge * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omxvideodec: Only flush the component ports after we passed input to them 2011-07-13 21:19:34 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Only change states downwards if an upper state was reached 2011-07-13 20:37:02 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omx: Add support for setting the component-role 2011-07-13 20:22:51 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxvideodec.c: omx: Improve error reporting by formatting the error codes better and also providing their string representation 2011-07-13 14:36:14 +0200 Sebastian Dröge * Makefile.am: build: Dist autogen.sh 2011-07-13 14:35:51 +0200 Sebastian Dröge * configure.ac: * omx/gstomx.c: build: Only require GStreamer >= 0.10.29 and GLib >= 2.16 2011-07-13 14:04:47 +0200 Sebastian Dröge * omx/Makefile.am: build: Dist gstomx.conf 2011-07-13 14:04:20 +0200 Sebastian Dröge * Makefile.am: build: Clean _stdint.h on "make distclean" 2011-07-13 14:02:50 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Fix typo 2011-07-13 13:59:50 +0200 Sebastian Dröge * omx/Makefile.am: omx: Dist gstomx.h 2011-07-13 12:46:50 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Set SYNCFRAME flag on the OMX buffers for non-delta units 2011-07-13 12:37:44 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Free all pending frames when resetting the decoder Workaround for https://bugzilla.gnome.org/show_bug.cgi?id=654529 2011-07-13 09:59:49 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Handle output buffers without a corresponding GstVideoFrame more gracefully This can happen on EOS in some cases and when the input is not properly framed. 2011-07-13 09:31:22 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Fix deadlock when finishing old frames that are left over by the decoder 2011-07-12 11:37:28 +0200 Sebastian Dröge * omx/gstomxh264dec.c: omxh264dec: It's called H.264, not H264 2011-07-12 11:36:42 +0200 Sebastian Dröge * omx/gstomxh264dec.c: * omx/gstomxmpeg4videodec.c: * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omxvideodec: Make sink/src pad template caps configurable 2011-07-12 11:13:50 +0200 Sebastian Dröge * omx/gstomx.c: omx: Allow to set a preferred configuration directory with the GST_OMX_CONFIG_DIR environment variable 2011-07-12 10:55:57 +0200 Sebastian Dröge * omx/gstomxh264dec.c: * omx/gstomxmpeg4videodec.c: * omx/gstomxvideodec.c: omxvideodec: Make core/component-name and in/outport index configurable 2011-07-12 10:05:31 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.conf: * omx/gstomx.h: omx: Add initial version of configuration system This now only registers elements that are specified in the configuration file. The configuration file is a keyfile in the first XDG configuration directory with the name gstomx.conf. 2011-07-12 08:53:15 +0200 Sebastian Dröge * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxh264dec.c: * omx/gstomxh264dec.h: * omx/gstomxh264videodec.h: omxh264dec: Rename from omxh264videodec to omxh264dec 2011-07-12 08:40:48 +0200 Sebastian Dröge * omx/gstomxh264videodec.c: omxh264videodec: Require alignment=au and stream-format={avc,bytestream} 2011-07-11 12:59:07 +0200 Sebastian Dröge * omx/gstbasevideodecoder.c: basevideodecoder: First inform subclass about resetting before resetting/freeing all internal state The subclass might want to access the old state. 2011-07-11 12:36:42 +0200 Sebastian Dröge * omx/gstbasevideodecoder.c: basevideodecoder: Track present position on discont before resetting it 2011-07-11 11:52:33 +0200 Sebastian Dröge * omx/gstbasevideodecoder.c: basevideodecoder: Also protect the list of pending frames from concurrent access when pushing all pendings events 2011-07-11 11:28:40 +0200 Sebastian Dröge * omx/gstbasevideocodec.c: * omx/gstbasevideocodec.h: * omx/gstbasevideodecoder.c: basevideocodec: Protect access to the list of pending frames with the object lock This is required if ::finish_frame() and all buffer output happens on a different thread than the sinkpad streaming thread. 2011-07-11 09:35:25 +0200 Sebastian Dröge * omx/gstbasevideodecoder.c: basevideodecoder: Set the correct lists to NULL after freeing 2011-07-11 08:54:53 +0200 Sebastian Dröge * omx/gstbasevideodecoder.c: basevideodecoder: Work with a copy of the GstVideoState in setcaps until the caps are accepted Also fix a refcount problem with the codec_data. 2011-07-12 08:34:44 +0200 Sebastian Dröge * omx/Makefile.am: * omx/gstomx.c: * omx/gstomxh264videodec.c: * omx/gstomxh264videodec.h: omxh264videodec: Add h.264 video decoder 2011-07-12 08:29:15 +0200 Sebastian Dröge * omx/gstomxmpeg4videodec.c: omxmpeg4videodec: Fix debug category name 2011-07-09 11:41:42 +0200 Sebastian Dröge * omx/Makefile.am: * omx/gstbasevideocodec.h: * omx/gstbasevideodecoder.c: * omx/gstbasevideoencoder.c: * omx/gstbasevideoutils.c: * omx/gstbasevideoutils.h: basevideo: Move the utils from the codec header to its own header 2011-07-09 11:32:06 +0200 Sebastian Dröge * omx/gstbasevideocodec.c: * omx/gstbasevideodecoder.c: basevideo: Use GSlice for allocating GstVideoFrame and don't duplicate code in the decoder base class 2011-07-09 11:05:37 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Use the destroy notify to free the coder_hook 2011-07-09 10:57:52 +0200 Sebastian Dröge * omx/gstbasevideocodec.c: * omx/gstbasevideocodec.h: * omx/gstbasevideodecoder.c: basevideo: Add destroy notify for the coder_hook to prevent memory leaks Fixes bug #654293. 2011-07-09 10:44:16 +0200 Sebastian Dröge * omx/Makefile.am: basevideo: Fix GType names to not conflict with the public video base classes It's still not possible to include headers of both in the same file or compile/link both into the same plugin but that shouldn't be necessary anyway. 2011-07-08 15:42:56 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Fix some minor memory leaks 2011-07-08 15:25:07 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxvideodec.c: omx: Rework port reconfiguration We always reconfigure all ports now if the settings of one port changes to prevent lots of race conditions, dropped frames and similar issues. 2011-07-08 13:16:45 +0200 Sebastian Dröge * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omxvideodec: Use the frames storage of the base class instead of implementing our own They could get out of sync and we could store already destroyed frames. 2011-07-07 12:51:03 +0200 Sebastian Dröge * omx/gstomx.h: omx: Clarify GQueue/GPtrArray element types 2011-07-07 12:23:24 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxvideodec.c: omx: Add more checks to acquire_buffer() and return the current state additional to the buffer Also refactor the code flow in the video decoder for this. This makes the usage of acquire_buffer() easier and more atomic. 2011-07-07 12:22:57 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Also flush/unflush the input port when changing the state PAUSED<->READY 2011-07-07 12:21:31 +0200 Sebastian Dröge * omx/gstomx.c: omx: Don't broadcast port->port_cond after allocating buffers successfully Allocating buffers must happen while no thread is waiting for the cond and especially must happen from the thread that would acquire buffers from the port. 2011-07-07 11:27:15 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Don't leak the codec_data after sending it 2011-07-07 10:27:31 +0200 Sebastian Dröge * omx/gstomx.c: omx: Always check if the component is in an error state before waiting for a condition variable to be signalled Otherwise we might wait forever because nothing is going to signal the condition variable anymore. 2011-07-07 10:22:12 +0200 Sebastian Dröge * omx/gstomx.c: omx: Always hold port->port_lock before signalling port->port_cond when notifying about errors Otherwise a port might be in the critical section, has checked the error state already but waits after port->port_cond is signalled, which will lead to a deadlock. 2011-07-07 10:07:43 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Remove reconfiguration test hack 2011-07-06 13:27:12 +0200 Sebastian Dröge * omx/gstomx.c: omx: Improve debug output a bit 2011-07-06 13:26:51 +0200 Sebastian Dröge * omx/gstomx.c: omx: Always try to deallocate buffers, even if there's a component error 2011-07-06 13:26:01 +0200 Sebastian Dröge * omx/gstomx.c: omx: Use G_USEC_PER_SEC for clarity instead of 1000000 2011-07-06 13:19:15 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Error out if the GStreamer allocated buffer is smaller than the OpenMAX output buffer Usually this must never happen but currently it happens during reconfigurations because of a race condition. Still it's better than crashing. 2011-07-06 10:40:13 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: omx: Don't use port_def.bEnabled to check if the Enable/Disable command is finished bEnabled should be set immediately after sending the command, it's only Bellagio that waits until the command is finished before setting it. 2011-07-06 10:30:11 +0200 Sebastian Dröge * omx/gstomxvideodec.c: omxvideodec: Remove obsolete FIXME comment 2011-07-06 10:29:54 +0200 Sebastian Dröge * omx/gstomx.c: * omx/gstomx.h: omx: Improve error handling and reporting 2011-07-06 08:48:37 +0200 Sebastian Dröge * omx/gstomxmpeg4videodec.c: * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omxvideodec: Make the inport and outport index configurable by the subclass 2011-06-28 08:51:23 +0200 Sebastian Dröge * omx/Makefile.am: * omx/gstomx.c: * omx/gstomx.h: * omx/gstomxmpeg4videodec.c: * omx/gstomxmpeg4videodec.h: * omx/gstomxvideodec.c: * omx/gstomxvideodec.h: omx: Add initial version of OpenMAX framework, video decoder base class and MPEG4 video decoder This currently hardcodes a lot of stuff but works at least. Also adds a generic framework for handling OpenMAX cores, components and ports. 2011-06-28 11:47:25 +0200 Sebastian Dröge * omx/gstbasevideocodec.c: * omx/gstbasevideocodec.h: * omx/gstbasevideodecoder.c: * omx/gstbasevideodecoder.h: basevideodecoder: Don't reorder serialized src events And allow to drop EOS by the subclass if ::finish returns DROPPED. Fixes bug #653544. 2011-06-27 09:41:40 +0200 Sebastian Dröge * omx/gstbasevideocodec.c: * omx/gstbasevideocodec.h: * omx/gstbasevideodecoder.c: basevideo: Add the caps to the GstVideoState and clean up caps/codec_data properly 2011-06-27 09:37:03 +0200 Sebastian Dröge * omx/gstbasevideocodec.c: * omx/gstbasevideocodec.h: * omx/gstbasevideodecoder.c: * omx/gstbasevideodecoder.h: * omx/gstbasevideoencoder.c: * omx/gstbasevideoencoder.h: * omx/gstbasevideoutils.c: basevideo: Add video encoder/decoder base classes from gst-plugins-bad 2011-06-21 11:17:35 +0200 Sebastian Dröge * omx/openmax/OMX_Audio.h: * omx/openmax/OMX_Component.h: * omx/openmax/OMX_ComponentExt.h: * omx/openmax/OMX_ContentPipe.h: * omx/openmax/OMX_Core.h: * omx/openmax/OMX_CoreExt.h: * omx/openmax/OMX_IVCommon.h: * omx/openmax/OMX_Image.h: * omx/openmax/OMX_Index.h: * omx/openmax/OMX_IndexExt.h: * omx/openmax/OMX_Other.h: * omx/openmax/OMX_Types.h: * omx/openmax/OMX_Video.h: * omx/openmax/OMX_VideoExt.h: openmax: Add OpenMAX IL 1.1.2 headers