=== release 1.0.0 ===

2013-03-22  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* configure.ac:
	  releasing 1.0.0

2013-03-19 16:40:09 +0000  Tim-Philipp Müller <tim.muller@collabora.co.uk>

	* omx/gstomxtheoradec.h:
	* omx/gstomxvp8dec.h:
	  omx: fix typo in copyright headers

2013-03-19 13:46:33 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* config/rpi/gstomx.conf:
	  rpi: Fix commit that added the VC1 decoder

2013-03-19 13:27:35 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* config/rpi/gstomx.conf:
	* omx/gstomxh263dec.c:
	* omx/gstomxh264dec.c:
	* omx/gstomxmjpegdec.c:
	* omx/gstomxmpeg2videodec.c:
	* omx/gstomxmpeg4videodec.c:
	* omx/gstomxtheoradec.c:
	* omx/gstomxvideodec.c:
	* omx/gstomxvp8dec.c:
	* omx/gstomxwmvdec.c:
	  omx: Add more constraints to the default sink template caps

2013-03-19 13:10:39 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* config/rpi/gstomx.conf:
	  rpi: Add VC1/WMV3 decoder
	  WMV2 and WMV1 (aka WMV 1-8) are not supported by RPi.

2013-03-19 12:59:20 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* config/rpi/gstomx.conf:
	  rpi: Add MJPEG decoder

2013-03-19 12:56:50 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* config/rpi/gstomx.conf:
	  rpi: Add VP8 decoder

2013-03-19 12:55:09 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Set ENDOFFRAME flag for the end of frames

2013-03-19 12:28:50 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* config/rpi/gstomx.conf:
	  rpi: Add Theora decoder to the config

2013-03-19 09:36:18 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* configure.ac:
	* omx/Makefile.am:
	* omx/gstomx.c:
	* omx/gstomxtheoradec.c:
	* omx/gstomxtheoradec.h:
	  omx: Add Theora decoder

2013-03-18 16:43:24 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Remove additional comma

2013-03-18 16:34:21 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* config/rpi/gstomx.conf:
	* omx/Makefile.am:
	* omx/gstomx.c:
	* omx/gstomxmpeg2dec.c:
	* omx/gstomxmpeg2dec.h:
	* omx/gstomxmpeg2videodec.c:
	* omx/gstomxmpeg2videodec.h:
	  omx: Rename MPEG2 decoder for consistency everywhere

2013-03-18 16:30:40 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/Makefile.am:
	* omx/gstomx.c:
	* omx/gstomxmjpegdec.c:
	* omx/gstomxmjpegdec.h:
	  omx: Add MJPEG decoder support

2013-03-18 16:06:54 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* configure.ac:
	* omx/Makefile.am:
	* omx/gstomx.c:
	* omx/gstomxvp8dec.c:
	* omx/gstomxvp8dec.h:
	  omx: Add VP8 decoder support

2013-03-18 15:44:23 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* config/rpi/gstomx.conf:
	  rpi: Add h263 decoder and rename MPEG2 decoder for consistency

2013-03-16 13:20:27 +0000  Tim-Philipp Müller <tim@centricular.net>

	* omx/gstomxmpeg2dec.c:
	  omxmpeg2dec: mpeg-2 decoder should be able to handle mpeg-1 too
	  https://bugzilla.gnome.org/show_bug.cgi?id=695879

2013-03-16 10:13:06 +0100  Josep Torra <n770galaxy@gmail.com>

	* omx/gstomx.c:
	  omx: minor stylistic change for consistency with other similar code

2013-03-16 10:00:24 +0100  Josep Torra <n770galaxy@gmail.com>

	* omx/gstomxaudioenc.c:
	* omx/gstomxvideodec.c:
	* omx/gstomxvideoenc.c:
	  omx: Clarify that loop task is also paused in EOS

2013-03-16 09:59:01 +0100  Josep Torra <n770galaxy@gmail.com>

	* omx/gstomxvideoenc.c:
	  omxvideoenec: Don't forget propagate flow return value upstream

2013-03-15 13:16:39 +0000  Tim-Philipp Müller <tim.muller@collabora.co.uk>

	* omx/gstomx.c:
	  omx: improve debug logging some more

2013-03-15 14:09:45 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Make sure that the first frame we pass to OpenMAX is a sync frame

2013-03-15 11:46:34 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	* omx/gstomxvideodec.c:
	* omx/gstomxvideoenc.c:
	  omx: Stop output port task after draining

2013-03-15 10:58:58 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Reset EOS flag in more places

2013-03-15 10:38:43 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Deallocate output buffers with the right function

2013-03-15 01:06:05 +0000  Tim-Philipp Müller <tim.muller@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	  omx: log commands as strings
	  Makes logs easier to read.

2013-03-15 00:47:47 +0000  Tim-Philipp Müller <tim.muller@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	  omx: log states as strings

2013-03-15 00:28:02 +0000  Tim-Philipp Müller <tim.muller@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	  omx: log component name in debug messages
	  Useful when we have more different components
	  active at the same time.

2013-03-15 09:51:42 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Don't interpolate timestamps
	  We will get exactly one frame per input buffer and assigning
	  timestamps between frames if more than one OMX buffer is required
	  per frame easily confuses timestamp tracking in OMX.

2013-03-15 09:32:42 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Give the codec_data the timestamp of the first frame and no duration

2013-03-14 17:31:17 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* config/rpi/gstomx.conf:
	  omx: The MPEG4 encoder is not available on RPi and probably never will

2013-03-14 17:26:30 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Reset some more buffer fields as required

2013-03-14 17:01:08 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* config/rpi/gstomx.conf:
	* omx/gstomx.c:
	  omx: The hack to disable usage of EOS buffers is not necessary anymore on RPi

2013-03-14 17:00:12 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Reset the flags for output ports when releasing a buffer, not for input ports

2013-03-14 15:03:02 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxh263enc.c:
	* omx/gstomxh264enc.c:
	* omx/gstomxmpeg4videoenc.c:
	  omx: Only unref caps after usage of its fields

2013-03-14 14:51:32 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Simplify bufferpool implementation

2013-03-13 13:23:35 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Improve min/max buffer counts handling

2013-03-14 12:49:42 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	* omx/gstomxaudioenc.c:
	* omx/gstomxvideodec.c:
	* omx/gstomxvideoenc.c:
	  omx: Handle the OMX_EventBufferFlag to detect EOS too

2013-03-13 10:29:23 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	  omx: Mark OpenMAX buffers as EGLImage if they contain one
	  Needs special handling in some places, e.g. because nFilledLen
	  will always be 0.

2013-03-13 10:21:49 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Properly check the nVersion field

2013-03-13 09:34:43 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: RPi returns garbage for OMX_IndexParamVideoBitrate, work around that

2013-03-12 20:02:53 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Make sure to always get the right buffer

2013-03-12 19:35:39 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Make sure the buffer is released to the pool if it's not the one we wanted

2013-03-12 19:17:08 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Drop too late frames instead of finishing them

2013-03-12 19:16:46 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omx: Release buffers to the correct port

2013-03-13 09:37:02 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Always load the OpenMAX IL cores with G_MODULE_BIND_LOCAL

2013-03-12 18:20:22 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Lazy-load symbols of libbcm_host.so
	  It exports eglIntOpenMAXILDoneMarker(), which is also
	  exported by libopenmaxil.so... but we need the version
	  from libopenmaxil.so as the other one is just a stub.

2013-03-11 13:59:15 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaacenc.c:
	* omx/gstomxh263enc.c:
	* omx/gstomxmpeg4videoenc.c:
	  omx: Don't set profile/level in other encoders if downstream caps don't specify any

2013-03-11 13:49:38 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxh264enc.c:
	  omxh264enc: If caps specify no profile/level use the component's defaults

2013-03-11 13:45:04 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Always allocate output buffers from the loop function

2013-03-11 13:12:57 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxh264enc.c:
	  omxh264enc: The h264 encoders are supposed to output byte-stream/au

2013-03-11 11:47:42 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Wait until the Executing state is reached before passing buffers to the component

2013-03-11 10:39:25 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Don't provide buffers to downstream
	  This only works reliable if we have a way to tell downstream to
	  release all our buffers for reconfiguration.

2013-03-11 10:29:44 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	  omxaudioenc: Disable output port when setting a new format

2013-03-11 10:29:30 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Disable output port when setting a new format

2013-03-11 10:22:07 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Disable output port when setting a new format
	  Based on a patch by Josep Torra <n770galaxy@gmail.com>

2013-03-11 10:04:10 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	* omx/gstomxvideodec.c:
	* omx/gstomxvideoenc.c:
	  omx: Catch errors when releasing buffers to a port and handle them

2013-03-10 12:09:23 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Use the correct video codec state when filling an input buffer

2013-03-10 12:05:50 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Store correct input state

2013-03-10 11:27:34 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Allocate output buffers as early as possible

2013-03-10 11:01:57 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Log unknown events

2013-03-09 14:14:40 +0100  Josep Torra <n770galaxy@gmail.com>

	* omx/gstomxaudioenc.c:
	* omx/gstomxvideodec.c:
	* omx/gstomxvideoenc.c:
	  omx: Fix deadlock in encoders and add explainatory comments.

2013-03-09 13:27:08 +0100  Josep Torra <n770galaxy@gmail.com>

	* omx/gstomxvideodec.c:
	  omxvideodec: fix printf format identifier

2013-03-09 13:07:59 +0100  Josep Torra <n770galaxy@gmail.com>

	* omx/gstomxvideodec.c:
	  omx: Minor changes on debuging info

2013-03-09 13:00:33 +0100  Josep Torra <n770galaxy@gmail.com>

	* omx/gstomxvideodec.c:
	  omxvideodec: avoid a deadlock

2013-03-08 15:56:40 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Don't forget to populate output port

2013-03-08 15:11:27 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	* omx/gstomxvideodec.c:
	* omx/gstomxvideoenc.c:
	  omx: Flush and stop srcpad when configuring new caps

2013-03-07 17:40:21 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* config/rpi/gstomx.conf:
	* omx/gstomx.c:
	  Revert "omx: use no-component-reconfigure hack on the Raspberry PI"
	  This reverts commit e123b2089f69a413241f30a2428ea6edd8f231e7.
	  It's not required anymore after the fix from the last commit.

2013-03-07 17:38:40 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Only negotiate a color format with downstream on the initial caps

2013-03-07 17:29:43 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Make sure the output port is disabled while we allocate buffers

2013-03-07 17:27:05 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Also wait for disabled output ports to be reconfigured

2013-03-07 14:10:12 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	* omx/gstomxvideodec.h:
	  omxvideodec: Add buffer pool for sharing OpenMAX memory with downstream

2013-03-07 11:11:58 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	* omx/gstomxaudioenc.c:
	* omx/gstomxvideodec.c:
	* omx/gstomxvideoenc.c:
	  omx: Add timeout to the flush operation and move buffer populating to a separate function

2013-03-06 17:33:23 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* config/rpi/gstomx.conf:
	* omx/gstomx.c:
	* omx/gstomx.h:
	  omx: Remove min buffer count hack for RPi again
	  It's not necessary anymore

2013-03-06 17:05:51 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	* omx/gstomxaudioenc.c:
	* omx/gstomxvideodec.c:
	* omx/gstomxvideoenc.c:
	  omx: Do number of buffers configuration explicitely

2013-03-07 11:24:54 +0100  Josep Torra <n770galaxy@gmail.com>

	* omx/gstomxvideodec.c:
	  omxvideodec: fixes reconfiguration
	  Avoid having fixed fields from previous caps on reconfiguration.

2013-03-07 11:02:39 +0100  Josep Torra <n770galaxy@gmail.com>

	* config/rpi/gstomx.conf:
	* omx/gstomx.c:
	  omx: use no-component-reconfigure hack on the Raspberry PI

2013-03-07 00:03:28 +0000  Tim-Philipp Müller <tim@centricular.net>

	* common:
	  Automatic update of common submodule
	  From 2de221c to 04c7a1e

2013-03-01 15:32:47 +0100  Josep Torra <n770galaxy@gmail.com>

	* omx/gstomxvideoenc.h:
	  omxvideoenc: drop unused data member

2013-03-01 12:23:54 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxh263enc.c:
	* omx/gstomxh264enc.c:
	* omx/gstomxmpeg4videoenc.c:
	  omxvideoenc: And set it actually on the right port

2013-03-01 12:18:08 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxh263enc.c:
	* omx/gstomxh264enc.c:
	* omx/gstomxmpeg4videoenc.c:
	  omxvideoenc: Set the coding type in the subclasses to the specific codec

2013-03-01 11:49:53 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: gst_omx_port_update_port_definition() returns a OMX_ERRORTYPE, not a gboolean

2013-03-01 11:44:17 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	* omx/gstomxvideoenc.c:
	  omxvideo{dec,enc}: Don't use the input state if it wasn't set yet

2013-03-01 11:25:04 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	  omxaudioenc: Only enable the output port after we know the output format

2013-03-01 11:24:56 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Only enable the output port after we know the output format

2013-02-28 17:02:31 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Only enable the output port after we know the output format

2013-03-01 11:18:18 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	  omx: Handle errors more gracefully

2013-02-28 15:48:53 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	* omx/gstomxaudioenc.c:
	* omx/gstomxh263dec.c:
	* omx/gstomxh264dec.c:
	* omx/gstomxmpeg2dec.c:
	* omx/gstomxmpeg4videodec.c:
	* omx/gstomxvideodec.c:
	* omx/gstomxwmvdec.c:
	  omx: Return the OMX_ERRORTYPE from gst_omx_port_update_port_definition

2013-02-28 15:37:53 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Return port definition update errors

2013-02-28 13:57:43 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* config/rpi/gstomx.conf:
	* omx/gstomx.c:
	* omx/gstomx.h:
	  omx: Add hack for RPi for the minimum number of buffers required for a port
	  The value in the port definition is invalid and the initial actual
	  buffer count should be used.

2013-02-28 13:26:56 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Always tell the component about the right number of buffers that we're going to allocate

2013-02-28 13:07:58 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Invert assertion to let it express what was intended

2013-02-28 11:19:07 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	* omx/gstomxaudioenc.c:
	* omx/gstomxvideodec.c:
	* omx/gstomxvideoenc.c:
	  omx: Add API for allocating a specific number of buffers and using EGLImages or buffers allocated elsewhere

2013-02-27 16:55:16 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	* omx/gstomxvideodec.c:
	* omx/gstomxvideoenc.c:
	  omx: Refactor code flow a bit if output port settings have changed

2013-02-27 15:49:56 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	* omx/gstomxaudioenc.c:
	* omx/gstomxvideodec.c:
	* omx/gstomxvideoenc.c:
	  omx: Clean up port settings change handling

2013-02-27 11:30:14 +0100  Josep Torra <n770galaxy@gmail.com>

	* omx/gstomxvideodec.c:
	  omxvideodec: initialize param structure before using it

2013-02-27 10:21:39 +0100  Josep Torra <n770galaxy@gmail.com>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: prevent a NULL pointer access

2013-02-26 17:25:49 +0100  Josep Torra <n770galaxy@gmail.com>

	* omx/gstomxvideodec.c:
	  omxvideodec: prevent a NULL pointer access

2013-02-25 13:11:16 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Fix deadlock during reconfiguration

2013-02-25 12:38:27 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomxaudioenc.c:
	* omx/gstomxvideodec.c:
	* omx/gstomxvideoenc.c:
	  omx: Auto-detect the port indizes if possible

2013-02-25 11:42:38 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	* omx/gstomxvideoenc.c:
	  omx: Refactor querying of component supported caps into its own function

2013-02-25 10:41:12 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	* omx/gstomxaudioenc.c:
	* omx/gstomxvideodec.c:
	* omx/gstomxvideoenc.c:
	  omx: Refactor waiting for buffers to be released by the component to a separate function

2013-01-11 17:44:13 +0000  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	  omx: Add methods to set up and close a tunnel between components

2013-02-25 09:15:53 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaacenc.c:
	* omx/gstomxaudioenc.c:
	* omx/gstomxaudioenc.h:
	  omxaudioenc: Rename component variable

2013-02-25 09:15:46 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxh263enc.c:
	* omx/gstomxh264enc.c:
	* omx/gstomxmpeg4videoenc.c:
	* omx/gstomxvideoenc.c:
	* omx/gstomxvideoenc.h:
	  omxvideoenc: Rename component variable

2013-02-25 09:12:22 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	* omx/gstomxvideodec.h:
	  omxvideodec: Rename component variable

2013-02-22 16:27:33 +0100  Josep Torra <n770galaxy@gmail.com>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: remove duplicated line

2013-02-22 10:42:08 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  Retry loading libbcm_host.so without an absolute path if that failed

2013-02-21 20:32:42 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* config/bellagio/Makefile.am:
	  Add missing file from last commit

2013-02-21 11:01:28 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* config/Makefile.am:
	* config/bellagio/gstomx.conf:
	* configure.ac:
	* omx/Makefile.am:
	* omx/gstomx.conf:
	  Add OpenMAX IL target for Bellagio
	  Not tested since a very long time though.

2013-02-21 10:59:29 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* configure.ac:
	* omx/Makefile.am:
	  Allow using external OpenMAX IL headers

2013-02-21 10:14:12 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* .gitignore:
	  Update .gitignore

2013-02-21 10:13:16 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* config/Makefile.am:
	* config/raspberry-pi.conf:
	* config/rpi/Makefile.am:
	* config/rpi/gstomx.conf:
	* configure.ac:
	  Install the RPI config when the RPI target is selected

2013-02-21 10:08:07 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  Set default hacks for the RPI target and always initialize bcm_host

2013-02-21 10:05:37 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* configure.ac:
	  Add configure parameter for setting the OpenMAX IL target

2013-02-12 11:55:39 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Add FIXME for the future

2013-02-12 11:49:21 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	* omx/gstomxaudioenc.c:
	* omx/gstomxaudioenc.h:
	* omx/gstomxvideodec.c:
	* omx/gstomxvideodec.h:
	* omx/gstomxvideoenc.c:
	* omx/gstomxvideoenc.h:
	  omx: Some minor refactoring and cleanup

2013-02-12 11:45:40 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Don't access the port's buffers array if it wasn't allocated yet

2013-02-12 11:44:40 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Mark an array as const

2013-02-12 11:41:43 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	* omx/gstomxaudioenc.c:
	* omx/gstomxvideodec.c:
	* omx/gstomxvideoenc.c:
	  omx: Split enabling/disabling of port into sending the command and waiting for it
	  This allows to do anything necessary after sending the command to actually let it finish

2013-02-12 11:37:38 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Flushing is also allowed in Paused state

2013-02-12 11:28:36 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Set stride, slice height and buffer size

2013-02-12 11:09:30 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* config/raspberry-pi.conf:
	  config: Add h264 and mpeg2 encoders to the raspberry pi config
	  Not completely working yet though.

2013-02-12 11:03:32 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Properly negotiate OMX color format with the component

2013-02-12 10:53:24 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Implement getcaps() vfunc

2013-01-29 21:32:53 +0000  Tim-Philipp Müller <tim@centricular.net>

	* configure.ac:
	  configure: use 1.0 gstconfig.h to detect disabled subsystems
	  Update unused configure check for GStreamer core subsystem
	  features from 0.10 to 1.0.

2013-01-28 20:44:41 +0100  Stefan Sauer <ensonic@users.sf.net>

	* common:
	  Automatic update of common submodule
	  From a942293 to 2de221c

2013-01-24 14:02:36 +0100  Julian Scheel <julian@jusst.de>

	* config/raspberry-pi.conf:
	* omx/Makefile.am:
	* omx/gstomx.c:
	* omx/gstomxmpeg2dec.c:
	* omx/gstomxmpeg2dec.h:
	  omx: add mpeg2 video decoder
	  This adds a decoder class for mpeg2, as well as an extended
	  configuration for raspberry pi.
	  https://bugzilla.gnome.org/show_bug.cgi?id=692446
	  Signed-off-by: Julian Scheel <julian@jusst.de>

2013-01-18 16:47:04 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Minimize the time when the messages lock is held
	  Fixes a deadlock if any OMX functions are called when the
	  messages are handled.
	  Thanks to Nicolas Dufresne for noticing.

2013-01-18 15:28:20 +0000  Tim-Philipp Müller <tim.muller@collabora.co.uk>

	* omx/gstomx.c:
	  omx: improve debug message when we can't find the config file
	  Mention where we looked for the config file.

2013-01-18 12:34:38 +0000  Tim-Philipp Müller <tim.muller@collabora.co.uk>

	* configure.ac:
	  build: fix autogen.sh with automake 1.13
	  AM_CONFIG_HEADER -> AC_CONFIG_HEADERS

2013-01-17 18:07:41 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.h:
	* omx/gstomxaudioenc.h:
	* omx/gstomxvideodec.h:
	* omx/gstomxvideoenc.h:
	  omx: Fix includes to properly work with the 1.0 releases

2013-01-15 15:08:28 +0000  Tim-Philipp Müller <tim.muller@collabora.co.uk>

	* common:
	  Automatic update of common submodule
	  From a72faea to a942293

2013-01-15 14:34:45 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Update port definition when changing some port setting

2013-01-14 11:41:57 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/Makefile.am:
	* omx/gstomx.c:
	  omx: Rename from libgstopenmax.so to ligstomx.so for consistency

2013-01-11 15:32:22 +0000  Nicolas Dufresne <nicolas.dufresne@collabora.com>

	* omx/gstomx.c:
	  omx: Add a method to send message

2013-01-11 15:44:38 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	  omx: Atomic ops are not required anymore for the reconfiguration

2013-01-11 12:52:10 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	* omx/gstomxvideodec.c:
	* omx/gstomxvideoenc.c:
	  omx: Fix some memory leaks and suboptimal locking

2013-01-11 12:34:04 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Don't forget to unmap frame in error cases

2013-01-11 12:29:20 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Fix copying of the video frames to the OMX buffers

2013-01-11 12:24:13 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Fix copying of the video frames from the OMX buffers

2013-01-10 14:44:33 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/Makefile.am:
	* omx/gstomx.c:
	* omx/gstomx.h:
	* omx/gstomxaudioenc.c:
	* omx/gstomxrecmutex.c:
	* omx/gstomxrecmutex.h:
	  omx: Implement new approach for locking that should solve all deadlocks on RPi
	  No mutex is locked while calling any OpenMAX functions anymore
	  and everything from the OpenMAX callbacks is inserted into a message
	  queue and handled from outside the callbacks.
	  Also there's only a single mutex and condition variable per component
	  now for handling anything from OpenMAX callbacks and a single mutex
	  for keeping our component/port state sane.

2012-12-20 19:30:38 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Set the OMX buffer nFilledLength field properly

2012-12-20 18:48:21 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxrecmutex.c:
	* omx/gstomxrecmutex.h:
	  omxrecmutex: Fix another race condition when two threads are trying to lock for recursion at the same time

2012-12-20 18:16:43 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxrecmutex.c:
	* omx/gstomxrecmutex.h:
	  omxrecmutex: Fix yet another race condition that resulted in deadlocks

2012-12-20 17:46:36 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomxrecmutex.c:
	* omx/gstomxrecmutex.h:
	  omx: Fix another race condition in the recursive mutex
	  Between lock() and begin_recursion() it was possible for another thread to
	  try to do a recursive_lock(). This would block because the mutex was already
	  locked(), but not ready for recursive locking yet. unlock() would never
	  happen in the original thread because it was waiting for the other thread
	  to finish first.
	  Happened on the Raspberry Pi.

2012-12-20 14:45:18 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxrecmutex.c:
	* omx/gstomxrecmutex.h:
	  omxrecmutex: Fix a small race condition when unlocking a non-recursive lock

2012-12-20 12:30:05 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	* omx/gstomxvideodec.c:
	* omx/gstomxvideoenc.c:
	  omx: Fix ununsed variable compiler warning

2012-12-20 12:27:47 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	* omx/gstomxvideodec.c:
	* omx/gstomxvideoenc.c:
	  omx: No need to start the srcpad task in ::start() already
	  It will be started properly after the caps are set.

2012-12-20 12:23:49 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: OMX_ErrorNoMore is no error and just means we ended iteration

2012-12-20 12:20:31 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	* omx/gstomxvideodec.c:
	* omx/gstomxvideoenc.c:
	  omx: Improve debug output

2012-12-20 12:02:30 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Don't forget to free a GList

2012-12-20 11:56:29 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Map OMX_COLOR_FormatYUV420PackedPlanar to I420 too
	  This is used on the Raspberry Pi.

2012-12-20 11:55:36 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: During negotiation of the output format make sure we use the correct OpenMAX format

2012-12-20 11:42:17 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: If negotiation fails this could also mean that the component can't do it at this point yet

2012-12-20 11:40:13 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Improve format negotiation a bit
	  Don't leak caps and make sure to fixate caps.

2012-12-19 13:05:28 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.h:
	  omx: Also initialize nStep field of the OMX structures

2012-12-19 13:03:37 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.h:
	  omx: Initialize struct version with the OMX version we compiled with

2012-12-19 12:44:31 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Extract data from the input buffer, not the codec data

2012-12-19 12:19:12 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* tools/listcomponents.c:
	  omx: Use has_suffix() instead of has_prefix() for the Broadcom hack

2012-12-19 12:08:35 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* Makefile.am:
	* configure.ac:
	* tools/Makefile.am:
	* tools/listcomponents.c:
	  tools: Add tool to list all components and their roles

2012-12-19 11:31:51 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Add hack to load and initialize libbcm_host.so
	  Needed on the Raspberry Pi. Patch based on a patch by
	  George Kiagiadakis <george.kiagiadakis@collabora.com>

2012-12-19 11:22:16 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* configure.ac:
	* omx/gstomx.h:
	  configure: Add configure option to pack OpenMAX structures
	  This is required to set to 4 for the Raspberry Pi for example.

2012-12-19 11:07:44 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* configure.ac:
	  configure: Require GStreamer 1.0.0

2012-04-20 17:13:52 +0300  George Kiagiadakis <george.kiagiadakis@collabora.com>

	* omx/gstomx.h:
	  omx: Initialize structures to version 1.1.2

2012-12-19 09:51:22 +0000  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* Makefile.am:
	* config/Makefile.am:
	* config/raspberry-pi.conf:
	* configure.ac:
	* omx/gstomx-raspberry.conf:
	  config: Add raspberry-pi configuration in a different directory

2012-05-20 20:11:59 +0300  George Kiagiadakis <george.kiagiadakis@collabora.com>

	* omx/gstomx-raspberry.conf:
	  raspberry: Add a gstomx.conf for the Raspberry Pi

2012-12-12 17:45:39 +0000  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.h:
	* omx/gstomxvideoenc.h:
	  omx: Fix some compilation errors caused by circular includes

2012-11-19 11:29:44 +0000  Tim-Philipp Müller <tim@centricular.net>

	* common:
	  Automatic update of common submodule
	  From 6bb6951 to a72faea

2012-11-12 15:14:09 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	* omx/gstomxvideoenc.c:
	  omx: Fix refcount problem with frames being dropped because of decoder bugs

2012-11-12 11:29:48 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	* omx/gstomxaudioenc.c:
	* omx/gstomxaudioenc.h:
	* omx/gstomxrecmutex.c:
	* omx/gstomxrecmutex.h:
	* omx/gstomxvideodec.c:
	* omx/gstomxvideodec.h:
	* omx/gstomxvideoenc.c:
	* omx/gstomxvideoenc.h:
	  omx: Update to new GLib thread API

2012-10-22 14:34:53 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	* omx/gstomxvideoenc.c:
	  omx: Use open/close vfuncs

2012-10-22 14:28:04 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	* omx/gstomxvideoenc.c:
	  omx: Handle video meta correctly

2012-06-20 13:11:58 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/Makefile.am:
	* omx/gstbasevideocodec.c:
	* omx/gstbasevideocodec.h:
	* omx/gstbasevideodecoder.c:
	* omx/gstbasevideodecoder.h:
	* omx/gstbasevideoencoder.c:
	* omx/gstbasevideoencoder.h:
	* omx/gstbasevideoutils.c:
	* omx/gstbasevideoutils.h:
	* omx/gstomxh263dec.c:
	* omx/gstomxh263enc.c:
	* omx/gstomxh264dec.c:
	* omx/gstomxh264enc.c:
	* omx/gstomxmpeg4videodec.c:
	* omx/gstomxmpeg4videoenc.c:
	* omx/gstomxvideodec.c:
	* omx/gstomxvideodec.h:
	* omx/gstomxvideoenc.c:
	* omx/gstomxvideoenc.h:
	* omx/gstomxwmvdec.c:
	  omx: Port to video base classes from -base

2012-10-17 17:57:43 +0100  Tim-Philipp Müller <tim.muller@collabora.co.uk>

	* omx/gstomxaacenc.c:
	* omx/gstomxh263dec.c:
	* omx/gstomxh263enc.c:
	* omx/gstomxh264dec.c:
	* omx/gstomxh264enc.c:
	* omx/gstomxmpeg4videodec.c:
	* omx/gstomxmpeg4videoenc.c:
	* omx/gstomxwmvdec.c:
	  omx: gst_element_class_set_details_simple() -> set_static_metadata()

2012-10-06 15:01:11 +0100  Tim-Philipp Müller <tim@centricular.net>

	* common:
	  Automatic update of common submodule
	  From 6c0b52c to 6bb6951

2012-09-22 16:10:38 +0100  Tim-Philipp Müller <tim@centricular.net>

	* common:
	  Automatic update of common submodule
	  From 4f962f7 to 6c0b52c

2012-06-21 20:22:13 +0300  George Kiagiadakis <george.kiagiadakis@collabora.com>

	* omx/gstomx.c:
	  omx: fix debug statement

2012-06-21 20:21:03 +0300  George Kiagiadakis <george.kiagiadakis@collabora.com>

	* omx/gstomx.c:
	  omx: use recursive_lock inside set_last_error(), since this function may be called from an event handler

2012-08-22 13:31:59 +0200  Stefan Sauer <ensonic@users.sf.net>

	* common:
	  Automatic update of common submodule
	  From 668acee to 4f962f7

2012-08-05 16:42:43 +0100  Tim-Philipp Müller <tim@centricular.net>

	* common:
	  Automatic update of common submodule
	  From 94ccf4c to 668acee

2012-08-03 19:32:13 +0100  Tim-Philipp Müller <tim@centricular.net>

	* omx/gstomx.c:
	  omx: fix plugin name for new GST_PLUGIN_DEFINE API

2012-07-23 08:47:32 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* common:
	  Automatic update of common submodule
	  From 98e386f to 94ccf4c

2012-07-10 09:57:09 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideodecoder.c:
	  omx: Update for allocation query API changes

2012-06-20 11:09:13 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	* omx/gstomxvideodec.c:
	* omx/gstomxvideoenc.c:
	  omx: Fix compilation after gst_pad_start_task() API changes

2012-06-08 15:06:35 +0200  Edward Hervey <edward.hervey@collabora.co.uk>

	* common:
	  Automatic update of common submodule
	  From 03a0e57 to 98e386f

2012-06-06 18:20:18 +0200  Edward Hervey <edward.hervey@collabora.co.uk>

	* common:
	  Automatic update of common submodule
	  From 1fab359 to 03a0e57

2012-06-01 10:30:27 +0200  Edward Hervey <edward.hervey@collabora.co.uk>

	* common:
	  Automatic update of common submodule
	  From f1b5a96 to 1fab359

2012-05-31 13:10:33 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* common:
	  Automatic update of common submodule
	  From 92b7266 to f1b5a96

2012-05-30 12:47:59 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* common:
	  Automatic update of common submodule
	  From ec1c4a8 to 92b7266

2012-05-30 11:26:30 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* common:
	  Automatic update of common submodule
	  From 3429ba6 to ec1c4a8

2012-05-13 15:58:10 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* common:
	  Automatic update of common submodule
	  From dc70203 to 3429ba6

2012-05-08 16:13:32 +0300  George Kiagiadakis <george.kiagiadakis@collabora.com>

	* omx/gstomx.c:
	  omx: Fix spelling mistake found by lintian: s/Seperate/Separate/

2012-04-30 23:58:43 +0300  George Kiagiadakis <george.kiagiadakis@collabora.com>

	* omx/Makefile.am:
	* omx/gstomx.c:
	* omx/gstomx.h:
	* omx/gstomxaudioenc.c:
	* omx/gstomxrecmutex.c:
	* omx/gstomxrecmutex.h:
	* omx/gstomxvideodec.c:
	* omx/gstomxvideoenc.c:
	  Implement a new custom recursive mutex type and fix locking in callbacks so that in-context calls are allowed.
	  According to the OMX specification, implementations are allowed to call
	  callbacks in the context of their function calls. However, our callbacks
	  take locks and this causes deadlocks if the unerlying OMX implementation
	  uses this kind of in-context calls.
	  A solution to the problem would be a recursive mutex. However, a normal
	  recursive mutex does not fix the problem because it is not guaranteed
	  that the callbacks are called from the same thread. What we see in Broadcom's
	  implementation for example is:
	  - OMX_Foo is called
	  - OMX_Foo waits on a condition
	  - A callback is executed in a different thread
	  - When the callback returns, its calling function
	  signals the condition that OMX_Foo waits on
	  - OMX_Foo wakes up and returns
	  The solution I came up with here is to take a second lock inside the callback,
	  but only if recursion is expected to happen. Therefore, all calls to OMX
	  functions are guarded by calls to gst_omx_rec_mutex_begin_recursion() / _end_recursion(),
	  which effectively tells the mutex that at this point we want to allow calls
	  to _recursive_lock() to succeed, although we are still holding the master lock.

2012-04-20 14:51:34 +0000  George Kiagiadakis <george.kiagiadakis@collabora.com>

	* omx/gstomx.c:
	* omx/gstomx.h:
	  omx: Add hack to disable setting roles to components.
	  Conflicts:
	  omx/gstomx.c

2012-04-30 23:20:24 +0000  George Kiagiadakis <george.kiagiadakis@collabora.com>

	* omx/gstomx.h:
	* omx/gstomxvideodec.c:
	  omxvideodec: Implement no-empty-eos-buffer hack, as in omxvideoenc.
	  Conflicts:
	  omx/gstomxvideodec.c

2012-04-30 23:19:55 +0000  George Kiagiadakis <george.kiagiadakis@collabora.com>

	* omx/gstomxvideodec.c:
	  omxvideodec: Fix coding style in the drain-may-not-return hack code

2012-04-25 19:03:48 +0530  Arun Raghavan <arun.raghavan@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Fix trivial debug print bug

2012-04-25 19:01:32 +0530  Arun Raghavan <arun.raghavan@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	* omx/gstomxvideodec.c:
	  omxvideodec: Add hack for Ducati components not returning from drain
	  This happens on the Galaxy Nexus, and causes the pipeline to hang waiting
	  endlessly for a drain. The hack replaces the wait with a wait + 500ms timeout.

2012-04-25 16:35:40 +0530  Arun Raghavan <arun.raghavan@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Fix deadlock between ending a flush and the event handler
	  gst_omx_port_set_flushing() calls OMX_FillThisBuffer at the end of a flush
	  without releasing the port lock, and this can cause a deadlock with the
	  EventHandler. This patches fixes this by dropping the lock for the duration of
	  the fill buffer call.

2012-04-24 15:41:38 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideodecoder.c:
	* omx/gstbasevideoencoder.c:
	  omx: Update video encoder/decoder base classes from gst-plugins-bad

2012-04-16 09:16:10 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* configure.ac:
	  configure: Modernize autotools setup a bit
	  Also we now only create tar.bz2 and tar.xz tarballs.

2012-04-16 09:12:37 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* common:
	  Automatic update of common submodule

2012-04-16 08:34:56 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	  omxaudioenc: Use gst_buffer_extract() to copy the input buffer data to the OpenMAX buffer

2012-04-13 17:16:42 -0400  Alessandro Decina <alessandro.decina@collabora.com>

	* omx/Makefile.am:
	  Fix relative/absolute path glitch
	  Signed-off-by: Reynaldo H. Verdejo Pinochet <reynaldo@collabora.com>

2012-04-12 15:57:32 -0400  Olivier Crête <olivier.crete@collabora.com>

	* common:
	* configure.ac:
	* omx/Makefile.am:
	* omx/gstbasevideocodec.c:
	* omx/gstbasevideocodec.h:
	* omx/gstbasevideodecoder.c:
	* omx/gstbasevideodecoder.h:
	* omx/gstbasevideoencoder.c:
	* omx/gstbasevideoencoder.h:
	* omx/gstomx.c:
	* omx/gstomx.h:
	* omx/gstomxaacenc.c:
	* omx/gstomxaudioenc.c:
	* omx/gstomxaudioenc.h:
	* omx/gstomxh263dec.c:
	* omx/gstomxh263enc.c:
	* omx/gstomxh264dec.c:
	* omx/gstomxh264enc.c:
	* omx/gstomxmpeg4videodec.c:
	* omx/gstomxmpeg4videoenc.c:
	* omx/gstomxvideodec.c:
	* omx/gstomxvideodec.h:
	* omx/gstomxvideoenc.c:
	* omx/gstomxvideoenc.h:
	* omx/gstomxwmvdec.c:
	  Port to Gst 0.11

2012-01-18 16:53:16 -0300  Reynaldo H. Verdejo Pinochet <reynaldo@collabora.com>

	* Android.mk:
	* omx/Makefile.am:
	  Enable building with Android's buildsystem
	  This change adds prelimary buildsystem hooks to
	  build gst-omx with the Android buildsystem. Like
	  the rest of GStreamer's Android hooks, the process
	  relies on the availability of androgenizer. A tool
	  developed by Collabora to automatically generate
	  Android.mk files from within the auto* setup.
	  Androgenizer is currently available at:
	  http://cgit.collabora.com/git/user/derek/androgenizer.git/

2011-12-13 10:17:41 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideocodec.c:
	  basevideocodec: Don't use G_TYPE_REGISTER_BOXED() yet
	  This would require GLib 2.26.

2011-12-14 10:09:34 +0100  Jonas Larsson <Jonas.Larsson@palm.com>

	* omx/gstomxaudioenc.c:
	  omxaudioenc: Add hack for encoder components that don't allow empty EOS buffers

2011-12-14 10:07:29 +0100  Jonas Larsson <Jonas.Larsson@palm.com>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Fix deadlock when using the EOS hack

2011-12-12 14:26:48 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Remove workaround for basevideocodec bug

2011-12-12 14:26:34 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Remove workaround for basevideocodec bug

2011-12-05 17:57:01 +0000  Matej Knopp <matej.knopp@gmail.com>

	* omx/gstbasevideocodec.c:
	* omx/gstbasevideocodec.h:
	* omx/gstbasevideodecoder.c:
	* omx/gstbasevideoencoder.c:
	  basevideo: Make GstVideoFrame a reference counted boxed object
	  ...and also clear all existing frames when resetting the decoder or encoder.

2011-12-09 12:17:29 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	* omx/gstomxvideoenc.c:
	  omx: Add hack for encoder components that don't allow empty EOS buffers

2011-12-09 10:21:47 +0100  Dake Gu <Dake.Gu@palm.com>

	* omx/gstomxaacenc.c:
	  omxaacenc: Generate and set codec_data on the caps for raw AAC

2011-10-31 11:36:06 +0100  Alessandro Decina <alessandro.decina@collabora.co.uk>

	* omx/gstbasevideoencoder.c:
	  basevideoencoder: handle failures in start() and stop()

2011-08-26 10:50:38 +0100  Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>

	* omx/gstbasevideoencoder.c:
	  basevideoenc: do not try to calculate latency from an unknown framerate
	  It'll divide by zero, and latency is unknown for an unknown framerate.
	  Fixes an assert in the schroenc test.
	  https://bugzilla.gnome.org/show_bug.cgi?id=657419

2011-12-08 11:50:49 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideoencoder.c:
	  basevideoencoder: Only make the header buffer metadata writable, not the buffer

2011-12-08 10:18:36 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideoencoder.c:
	  basevideoencoder: Fix handling of force-keyunit events

2011-12-06 13:28:41 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	  omxaudioenc: Don't forward EOS events immediately but let all other events be handled by the base class
	  Previously this logic was inversed, which did not make any sense at all.

2011-12-06 12:47:25 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	* omx/gstomxaudioenc.h:
	  omxaudioenc: Use correct timestamp, duration and filled length for the EOS buffers

2011-12-06 12:47:12 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	* omx/gstomxvideodec.h:
	  omxvideodec: Use correct timestamp, duration and filled length for the EOS buffers

2011-12-06 12:46:51 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	* omx/gstomxvideoenc.h:
	  omxvideoenc: Use correct timestamp, duration and filled length for the EOS buffers

2011-12-05 13:18:09 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Improve debugging of buffer handling

2011-12-05 08:12:48 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Drop EOS events in ::finish()
	  The event will be forwarded downstream from the srcpad
	  loop function after the last buffer was generated by the
	  component. Forwarding it after ::finish() will use the
	  sinkpad streaming thread and does not guarantee that
	  the encoder is completely drained.

2011-12-01 16:20:36 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Properly drop frames due to QoS
	  Instead of finishing them they should be passed to drop(), which
	  will then send QoS messages.

2011-11-29 12:21:32 +0100  Jonas Larsson <jonas@hallerud.se>

	* omx/gstomxh264enc.c:
	  omxh264enc: Add support for resending headers after a forced-keyframe

2011-11-29 12:12:33 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideocodec.h:
	* omx/gstbasevideoencoder.c:
	  basevideoencoder: Pass the all-headers field of the force-key-unit event to the subclass

2011-11-29 12:12:04 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideoencoder.c:
	* omx/gstbasevideoencoder.h:
	  basevideoencoder: Implement full support for the new force-key-unit event
	  Including support for the running-time and count fields.

2011-11-29 09:31:11 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideoencoder.c:
	  basevideoencoder: Use new force-keyunit event API from gst-plugins-base

2011-11-29 09:18:19 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideoencoder.c:
	* omx/gstbasevideoencoder.h:
	  basevideoencoder: Adjusting padding is not required for -bad libraries

2011-11-28 19:48:01 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideoencoder.h:
	  basevideoencoder: Move some fields to the private part of the instance struct

2011-11-28 19:36:56 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideoencoder.c:
	  basevideoencoder: Make headers metadata writable before pushing downstream
	  The timestamp, duration, etc of the headers has to be changed.

2011-11-28 19:35:40 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideoencoder.c:
	* omx/gstbasevideoencoder.h:
	  basevideoencoder: Push the downstream force-keyframe event after the next keyframe
	  Even if the corresponding GstVideoFrame doesn't have the is_sync_point
	  flag set.

2011-11-28 19:29:13 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideoencoder.c:
	* omx/gstbasevideoencoder.h:
	  basevideoencoder: Don't push an upstream force-keyunit event downstream

2011-11-25 11:48:08 +0100  Jonas Larsson <jonas@hallerud.se>

	* omx/gstbasevideoencoder.c:
	* omx/gstbasevideoencoder.h:
	  basevideoencoder: Add initial support for the all-headers field of the force-keyframe event
	  See bug #607742.

2011-11-25 11:37:39 +0000  Tim-Philipp Müller <tim.muller@collabora.co.uk>

	* omx/gstbasevideodecoder.c:
	  basevideodecoder: some more debug logging

2011-11-23 20:03:32 +0000  Tim-Philipp Müller <tim.muller@collabora.co.uk>

	* omx/gstbasevideodecoder.c:
	* omx/gstbasevideodecoder.h:
	  basevideodecoder: add API to drop a frame and post a QoS message on the bus
	  https://bugzilla.gnome.org/show_bug.cgi?id=640017
	  API: gst_base_video_decoder_drop_frame()

2011-11-22 23:04:49 +0000  Tim-Philipp Müller <tim.muller@collabora.co.uk>

	* omx/gstbasevideodecoder.c:
	  docs: fix comment in gst_base_video_decoder_get_max_decode_time() docs

2011-11-22 19:57:07 +0000  Tim-Philipp Müller <tim.muller@collabora.co.uk>

	* omx/gstbasevideodecoder.c:
	  basevideodecoder: fix weird event list handling
	  Get rid of weird code that copies a list manually, taking
	  ownership of the elements and then frees the old list. Instead,
	  just take over the old list entirely. (If the intent was to
	  reverse the list, one could use g_list_reverse() instead).
	  Then, push events in the list out from last to first (since they
	  were prepended as they came in) instead of just pushing out the
	  last in the list and leaking the others.

2011-11-25 11:31:58 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* configure.ac:
	* omx/Makefile.am:
	* omx/gstbaseaudiodecoder.c:
	* omx/gstbaseaudiodecoder.h:
	* omx/gstbaseaudioencoder.c:
	* omx/gstbaseaudioencoder.h:
	* omx/gstbaseaudioutils.c:
	* omx/gstbaseaudioutils.h:
	* omx/gstomxaacenc.c:
	* omx/gstomxaudioenc.c:
	* omx/gstomxaudioenc.h:
	  omxaudioenc: Use audio base classes from gst-plugins-base instead of having our own copies

2011-11-18 10:00:31 -0800  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	  omxaudioenc: First set ports to flushing before waiting for the srcpad streaming thread to finish

2011-11-18 09:59:43 -0800  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: First set ports to flushing before waiting for the srcpad streaming thread to finish

2011-11-18 09:58:58 -0800  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: First set ports to flushing before waiting for the srcpad streaming thread to finish

2011-11-17 14:38:54 -0800  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Only disabling of a port is like flushing, enabling is like unflushing

2011-11-17 13:33:35 -0800  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Enabling/disabling a port is also like flushing
	  The component returns all buffers to us and shouldn't get any
	  new buffers passed anymore.

2011-11-17 11:26:33 -0800  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	  omxaudioenc: Signal the drain GCond even if downstream returned an error

2011-11-17 11:26:20 -0800  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Signal the drain GCond even if downstream returned an error

2011-11-17 11:25:52 -0800  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Signal the drain GCond even if downstream returned an error

2011-11-17 10:34:19 -0800  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideoencoder.c:
	  basevideoencoder: Only call ::reset once in READY->PAUSED

2011-11-17 10:19:35 -0800  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	  omxaudioenc: Shutdown component in PAUSED->READY and deallocate buffers

2011-11-17 10:19:30 -0800  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Shutdown component in PAUSED->READY and deallocate buffers

2011-11-17 10:19:10 -0800  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Shutdown component in PAUSED->READY and deallocate buffers

2011-11-16 12:02:08 -0800  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Set force_keyframe to FALSE after handling it
	  There's no reason why the base class should forward the event
	  further downstream if we already handled it and will insert a
	  keyframe.

2011-11-16 11:21:25 -0800  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Always push buffers downstream, even if we didn't find a corresponding GstVideoFrame

2011-11-15 09:47:55 -0800  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Fix debug level for flushing in wrong state from ERROR to DEBUG
	  It's not really an error and doesn't matter at all if flush is called
	  when the component is not running.

2011-11-15 08:40:07 -0800  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxh264enc.c:
	  omxh264enc: Detect bytestream stream format and don't put SPS/PPS into the caps for this format

2011-11-15 08:28:32 -0800  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	* omx/gstomxvideoenc.h:
	  omxvideoenc: Add vfunc for handling the output frames
	  This can be used by subclasses to override the buffer flags
	  or to handle some frames differently than the default behaviour.

2011-11-14 12:50:26 -0800  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Don't release buffers twice if dropping because of QoS

2011-11-14 09:13:06 -0800  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Add XXX to the nOffset reset hack comment for QCOM

2011-11-10 15:18:08 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	  omxaudioenc: Make srcpad caps setting threadsafe

2011-11-10 15:17:56 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Make srcpad caps setting threadsafe

2011-11-10 15:17:41 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Make srcpad caps setting threadsafe

2011-11-10 15:10:14 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	  omxaudioenc: Make the srcpad task and the sinkpad streaming thread handling threadsafe

2011-11-10 15:03:05 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	  omxaudioenc: Always flush the ports and make sure no processing is happening in ::flush
	  This fixes a race condition that happened when seeking
	  very often in a short period of time.

2011-11-10 15:02:22 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Always flush the ports and make sure no processing is happening in ::reset
	  This fixes a race condition that happened when seeking
	  very often in a short period of time.

2011-11-10 15:01:36 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Fix minor race condition when draining after upstream signalled EOS

2011-11-10 14:56:19 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	  omxaudioenc: Improve EOS handling
	  If downstream return UNEXPECTED we should still signal the
	  drain cond because nothing will trigger this again later.

2011-11-10 14:56:11 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Improve EOS handling
	  If downstream return UNEXPECTED we should still signal the
	  drain cond because nothing will trigger this again later.

2011-11-10 14:54:33 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	  omxaudioenc: Improve debugging of EOS and draining

2011-11-10 14:54:17 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Improve debugging of EOS and draining

2011-11-10 14:51:06 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Log if acquiring buffer for EOS failed

2011-11-10 14:42:13 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: The component is not started in READY

2011-11-10 14:39:40 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	  omxaudioenc: No need to signal the drain cond when going from READY to PAUSED
	  Also the component is not started in READY

2011-11-10 14:40:56 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: No need to signal the drain cond when going from READY to PAUSED
	  Also the component is not started in READY.

2011-11-09 15:46:02 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Always flush the ports and make sure no processing is happening in ::reset
	  This fixes a race condition that happened when seeking
	  very often in a short period of time.

2011-11-09 15:45:20 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Fix minor race condition when draining after upstream signalled EOS

2011-11-09 15:44:11 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Improve EOS handling
	  If downstream return UNEXPECTED we should still signal the
	  drain cond because nothing will trigger this again later.

2011-11-09 15:43:32 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Improve debugging of EOS and draining

2011-11-09 15:42:46 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: The component is not started already when going from READY to PAUSED

2011-11-09 15:42:13 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: No need to signal the drain cond when going from READY to PAUSED

2011-11-09 15:41:02 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Always reset buffer flags for output ports, even in flushing/error state

2011-11-09 09:00:57 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Improve debugging in case of QoS-related frame drops

2011-11-08 12:46:31 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Release the video codec stream lock before acquiring an input buffer
	  Otherwise the srcpad task might block on this lock and
	  no buffers ever become available again.

2011-11-08 12:45:16 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	  omxaudioenc: Release the audio encoder stream lock before acquiring an input buffer
	  Otherwise the srcpad task might block on this lock and
	  no buffers ever become available again.

2011-11-08 12:42:58 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Release the video codec stream lock before acquiring an input buffer
	  Otherwise the srcpad task might block on this lock and
	  no buffers ever become available again.

2011-11-08 11:07:01 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	* omx/gstomxaudioenc.h:
	  omxaudioenc: Don't try to drain the component after EOS
	  And don't send EOS twice in any case. This most likely
	  will cause the component to not output it again and
	  is not necessary anyway.

2011-11-08 11:03:29 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	* omx/gstomxvideoenc.h:
	  omxvideoenc: Don't try to drain the component after EOS
	  And don't send EOS twice in any case. This most likely
	  will cause the component to not output it again and
	  is not necessary anyway.

2011-11-08 10:46:36 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	* omx/gstomxvideodec.h:
	  omxvideodec: Don't try to drain the component after EOS
	  And don't send EOS twice in any case. This most likely
	  will cause the component to not output it again and
	  is not necessary anyway.

2011-11-08 09:09:28 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Implement dropping of too late frames via QoS

2011-11-08 08:31:58 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	  omxaudioenc: Minor code refactoring

2011-11-08 08:31:43 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Minor code refactoring

2011-11-08 08:31:32 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Make sure to always release buffers back to OMX

2011-11-08 08:24:19 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Also properly release buffers when in error state

2011-11-08 08:22:08 +0100  Jonas Larsson <Jonas.Larsson@palm.com>

	* omx/gstomx.c:
	  omx: Properly release buffers during flushing
	  We can't pass them back to OMX_FillThisBuffer() or OMX_EmptyThisBuffer()
	  but instead of doing nothing we have to put them back into our queue.
	  Otherwise the buffer is leaked and we will have too few buffers in
	  the future.

2011-11-07 14:00:47 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Free pending frames after draining component

2011-11-07 14:00:35 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Free pending frames after draining the component

2011-11-07 11:07:01 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Make handling and usage of the base video codec frames threadsafe

2011-11-07 11:05:29 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Fix deadlock between srcpad stream lock and ::reset()

2011-11-07 11:04:27 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideoenc: Make handling and usage of the base video codec frames threadsafe

2011-11-07 10:58:44 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Free all pending frames after draining the component

2011-11-07 10:58:24 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Always free all pending frames when caps changes require reconfiguration

2011-11-04 09:43:48 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	  omxaudioenc: Only drain the component a single time and only after processing started

2011-11-04 09:43:32 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Only drain the component a single time and only after processing started

2011-11-04 09:43:12 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Only drain the component a single time and only after processing started

2011-11-04 09:04:16 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Reset buffer flags to 0 after it was consumed by the component or the element
	  Some implementations don't reset the flags and the standard is not
	  really clear on the expected behaviour. Let's just always reset the
	  flags as they're not valid at this point anymore.

2011-11-02 13:50:14 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	* omx/gstomxvideoenc.h:
	  omxvideoenc: Better handling of encoder parameters
	  Only set them if necessary and allow to use the component
	  defaults.

2011-11-02 13:22:50 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Make unsupported bitrate/quantizer settings less fatal

2011-11-02 10:39:50 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: If no stride was set for the OMX output port assume GStreamer stride
	  This is not really correct but there's nothing else we could do.

2011-11-02 10:39:10 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: If no stride was set for the OMX input port assume GStreamer stride
	  This is not really correct but there's nothing else we could do.

2011-11-01 16:46:09 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	* omx/gstomxaudioenc.h:
	  omxaudioenc: Implement draining of the component and use it
	  This makes sure that all buffers are encoded and pushed downstream
	  before flushing the ports and losing some buffers.

2011-11-01 16:41:46 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	* omx/gstomxvideoenc.h:
	  omxvideoenc: Implement draining of the component and use it
	  This makes sure that all buffers are encoded and pushed downstream
	  before flushing the ports and losing some buffers.

2011-11-01 16:08:59 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	* omx/gstomxvideodec.h:
	  omxvideodec: Implement draining of the component and use it
	  This makes sure that all buffers are decoded and pushed downstream
	  before flushing the ports and losing some buffers.

2011-10-20 14:32:40 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Fix deadlock if ::reset is called before finding the corresponding frame of a decoded buffer

2011-11-01 15:10:12 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	* omx/gstomxaudioenc.h:
	* omx/gstomxvideoenc.h:
	  omxaudioenc: Forward downstream flow returns to upstream

2011-11-01 15:10:01 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Forward downstream flow returns to upstream

2011-11-01 13:58:38 +0100  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	* omx/gstomxvideodec.h:
	  omxvideodec: Forward downstream flow returns to upstream

2011-10-25 14:23:38 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* README:
	  omx: Add minimal README file

2011-10-20 15:21:07 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Fix deadlock caused by calling reset while the loop function does something with the base video codec stream lock

2011-10-20 15:20:47 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Fix deadlock caused by calling reset while the loop function does something with the base video codec stream lock

2011-10-20 14:30:38 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Move locking at the correct place

2011-10-14 10:27:47 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	  omx: Remove QCOM hack to reset nOffset in EmptyBufferDone
	  This is now done in a generic way that does not require any
	  hacks because it will work without any side effects on any
	  OMX implementation.

2011-10-14 10:26:00 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Reset nOffset to 0 in EmptyBufferDone if nFilledLen is 0
	  Some OMX implementations don't reset nOffset when the complete
	  buffer is emptied but instead only reset nFilledLen. We reset
	  nOffset to 0 if nFilledLen == 0, which is safe to do because
	  the offset *must* be 0 if the buffer is not filled at all.
	  Seen in QCOM's OMX implementation.

2011-10-04 10:56:33 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: If one parameter/configuration is not supported don't skip the next

2011-10-03 09:12:44 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxh264dec.c:
	  omxh264dec: Require stream-format=byte-stream
	  Other stream-formats are unlikely to be supported by OMX components.

2011-09-29 10:37:32 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	* omx/gstomxvideodec.h:
	  omxvideodec: Add API for subclasses to prepare/convert frames

2011-09-27 15:08:54 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	  omxaudioenc: Switch to Idle first and wait before switching to Loaded and deallocating buffers
	  Allocating buffers before the Idle state is reached can lead to crashes.

2011-09-27 15:08:44 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Switch to Idle first and wait before switching to Loaded and deallocating buffers
	  Allocating buffers before the Idle state is reached can lead to crashes.

2011-09-27 15:05:19 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Switch to Idle first and wait before switching to Loaded and deallocating buffers
	  Allocating buffers before the Idle state is reached can lead to crashes.

2011-09-27 14:15:06 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	* omx/gstomxvideodec.c:
	  omxvideodec: New hack for QCOM to recreate the component instead of reconfiguring it on caps changes

2011-09-27 12:13:56 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Change a g_assert() into a GST_WARNING_OBJECT()

2011-09-26 13:04:18 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	  omx: Add hack for Qualcomm's OMX implementation to manually reset nOffset in EmptyBufferDone

2011-09-23 17:02:49 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	  omxaudioenc: Add a check to prevent a zero-sized OMX buffer

2011-09-23 17:02:19 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Add some more checks for correct OMX buffer sizes

2011-09-23 15:53:49 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Add some more checks for OMX buffer sizes

2011-09-14 10:15:38 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	* omx/gstomxaudioenc.c:
	* omx/gstomxvideodec.c:
	* omx/gstomxvideoenc.c:
	  omx: Wait until the Executing state is reached before calling OMX_FillThisBuffer()
	  This correctly works around the QCOM race condition that happens when calling
	  FTB after setting the new state and before reaching it.

2011-09-02 14:43:43 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Negotiate video format with downstream and what the component claims to support

2011-08-25 19:56:58 +0100  Vincent Penquerc'h <vincent.penquerch@collabora.co.uk>

	* omx/gstbasevideoencoder.c:
	  basevideoencoder: fix element leak
	  and this concludes an hour of yelling at the bloody test failing,
	  only to track down the problem not being in the test.
	  https://bugzilla.gnome.org/show_bug.cgi?id=657368

2011-08-19 09:20:39 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Release basevideocodec stream lock while waiting for a buffer
	  This prevents deadlocks if no empty input buffers are available and
	  releasing input buffers requires the loop function to handle some
	  output buffers first.

2011-08-19 09:19:22 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Release basevideocodec stream lock while waiting for a buffer
	  This prevents deadlocks if no empty input buffers are available and
	  releasing input buffers requires the loop function to handle some
	  output buffers first.

2011-08-18 10:24:26 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideodecoder.c:
	  basevideodecoder: Fix deadlock

2011-08-18 10:03:20 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbaseaudiodecoder.c:
	  baseaudiodecoder: Don't take the stream lock in the seek handler
	  This will lead to deadlocks

2011-08-18 10:02:50 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideocodec.c:
	* omx/gstbasevideocodec.h:
	* omx/gstbasevideodecoder.c:
	* omx/gstbasevideoencoder.c:
	  basevideo: Fix locking, especially if both pads have different streaming threads

2011-08-18 09:42:02 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideodecoder.c:
	* omx/gstbasevideoencoder.c:
	  basevideo: Don't call g_type_class_peek_parent() in class_init
	  This is already done by the GObject boilerplate macro

2011-08-18 09:40:46 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbaseaudiodecoder.c:
	  baseaudiodecoder: Don't call g_type_class_peek_parent() in class_init
	  This is already done by the boilerplate macro

2011-08-18 09:34:38 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbaseaudiodecoder.c:
	* omx/gstbaseaudiodecoder.h:
	  baseaudiodecoder: Fix thread safety issues if both pads have different streaming threads

2011-08-18 09:17:04 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbaseaudiodecoder.c:
	  baseaudiodecoder: Delay sending of serialized events to finish_frame()

2011-08-17 14:33:31 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	  omxaudioenc: Always require at least OMX_MIN_PCMPAYLOAD_MSEC per input buffer

2011-08-17 14:28:44 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbaseaudioencoder.c:
	* omx/gstbaseaudioencoder.h:
	  baseaudioencoder: Add support for requesting a minimum and maximum number of samples per frame
	  This extends the special case of a fixed number of samples per frame
	  that was supported before already.

2011-08-17 14:17:18 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	  omxaudioenc: Handle inbuf==NULL properly in ::handle_frame()

2011-08-17 13:04:19 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaacenc.c:
	  omxaacenc: Implement ::get_num_samples() vfunc

2011-08-17 13:03:50 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	* omx/gstomxaudioenc.h:
	  omxaudioenc: Add vfunc to get the number of samples inside a buffer

2011-08-17 11:34:31 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	  omxaudioenc: Release baseaudioencoder stream lock while waiting for a buffer in ::handle_frame()
	  This prevents deadlocks if no empty input buffers are available and
	  releasing input buffers requires the loop function to handle some
	  output buffers first.

2011-08-17 11:34:04 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbaseaudioencoder.c:
	* omx/gstbaseaudioencoder.h:
	  baseaudioencoder: Fix thread safety issues if both pads have different streaming threads

2011-08-17 09:58:01 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbaseaudioencoder.c:
	  baseaudioencoder: Taking the OBJECT lock in reset() is not needed

2011-08-16 11:03:24 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxaudioenc.c:
	  omxaudioenc: Remove hack that only applies to the video encoder class

2011-08-16 10:49:21 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/Makefile.am:
	* omx/gstomx.c:
	* omx/gstomx.conf:
	* omx/gstomxaacenc.c:
	* omx/gstomxaacenc.h:
	  omxaacenc: Add initial version of OpenMAX AAC encoder element

2011-08-15 15:10:04 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/Makefile.am:
	* omx/gstomxaudioenc.c:
	* omx/gstomxaudioenc.h:
	  omxaudioenc: Add initial version of audio encoder base class

2011-08-15 14:14:11 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbaseaudioencoder.c:
	  baseaudioencoder: Delay sending of serialized events to finish_frame()

2011-08-15 13:06:51 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/Makefile.am:
	* omx/gstbaseaudiodecoder.c:
	* omx/gstbaseaudiodecoder.h:
	* omx/gstbaseaudioencoder.c:
	* omx/gstbaseaudioencoder.h:
	  audio: Integrate audio base classes into the build system and fixup

2011-08-15 12:56:00 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbaseaudiodecoder.c:
	* omx/gstbaseaudiodecoder.h:
	* omx/gstbaseaudioencoder.c:
	* omx/gstbaseaudioencoder.h:
	* omx/gstbaseaudioutils.c:
	* omx/gstbaseaudioutils.h:
	  audio: Add audio decoder/encoder base classes
	  Taken from http://cgit.collabora.com/git/user/manauw/gst-plugins-bad.git/log/?h=baseaudio

2011-08-12 12:25:03 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideoencoder.c:
	  basevideoencoder: Proxy the width/height/framerate/PAR constraints of downstream caps to upstream
	  This allows to specify constraints on the compressed downstream caps
	  by muxers or capsfilters, which will then be forwarded to upstream
	  and allows video converters to fulfill the constraints.
	  Code based on Mark Nauwelaerts audio encoder base class.

2011-08-12 12:13:45 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideoencoder.h:
	  basevideoencoder: Remove old ::getcaps() comment

2011-08-12 12:06:23 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideoencoder.c:
	* omx/gstbasevideoencoder.h:
	  basevideoencoder: Remove ::get_caps() vfunc
	  Subclasses can set the caps more efficiently and this only
	  caused additional indirections.

2011-08-10 10:24:21 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxh263enc.c:
	* omx/gstomxh264enc.c:
	* omx/gstomxmpeg4videoenc.c:
	* omx/gstomxvideoenc.c:
	  omxvideoenc: Use "video/x-raw-yuv" as sink template caps instead of strict I420 caps

2011-08-10 10:23:39 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxmpeg4videodec.c:
	  omxmpeg4videodec: Don't require width/height on sink pad caps

2011-08-10 10:11:37 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxh263dec.c:
	* omx/gstomxh264dec.c:
	* omx/gstomxmpeg4videodec.c:
	* omx/gstomxvideodec.c:
	* omx/gstomxwmvdec.c:
	  omxvideodec: Use "video/x-raw-yuv" as src template caps instead of strict I420 caps

2011-08-10 09:56:30 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Set the state back to StateLoaded even if an error happened

2011-08-10 09:49:57 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Don't hold any locks while calling OMX_SendCommand()
	  It might call into one of the callbacks and lead to deadlocks, e.g.
	  with the Qualcomm OMX implementation.

2011-08-10 09:32:01 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Move some code

2011-08-10 09:23:10 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Reset pending reconfigure output ports when changing the state from Executing to any lower state

2011-08-10 09:08:00 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Fix crash when setting last error after the ports were freed

2011-08-10 09:03:52 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Free component structure

2011-08-10 09:02:52 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Make component destruction safer

2011-08-10 08:53:05 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Set pAppPrivate of buffers to NULL when deallocating buffers
	  This prevents usage of freed memory later if the OMX component
	  has weird behaviour.

2011-08-10 08:52:25 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Set the state back to StateLoaded even if an error happened

2011-08-10 08:51:54 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Add some assertions to check if the buffer pAppPrivate is still correct

2011-08-08 13:04:30 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.h:
	  omx: Add parenthesis at correct places in the struct init macro

2011-08-08 12:12:58 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Only prevent setting a higher state if the component is in an error state

2011-08-03 16:02:01 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideodecoder.c:
	  basevideodecoder: Use the cached video frame size instead of recalculating it

2011-08-03 15:35:01 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Improve debugging in param/config getter/setter wrappers

2011-08-03 13:10:33 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Don't abort if the color format is not supported but give a useful error message

2011-08-02 15:14:37 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxh263enc.c:
	* omx/gstomxh264enc.c:
	* omx/gstomxmpeg4videoenc.c:
	* omx/gstomxvideoenc.c:
	  omxvideoenc: Don't fail if setting the bitrate or profile is not supported by the component
	  Also always set/get the profile, even if there are no peer caps.

2011-08-02 15:14:24 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideoencoder.c:
	  basevideoencoder: Make access to the list of frames threadsafe

2011-08-01 13:22:05 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	  omx: Add a hacks flag for the Qualcomm 7x30 OMX_FillThisBuffer() race and make it optional

2011-07-29 13:56:59 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Add workaround for QCOM 7x30 race condition

2011-07-29 12:06:21 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/Makefile.am:
	* omx/gstomx.c:
	* omx/gstomxh263enc.c:
	* omx/gstomxh263enc.h:
	  omxh263enc: Add H.263 encoder element

2011-07-29 11:26:39 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxmpeg4videoenc.c:
	  omxmpeg4videoenc: Add support for setting profile/level via caps

2011-07-28 14:14:45 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxh264enc.c:
	  omxh264enc: Add support for setting profile/level via caps

2011-07-28 12:58:25 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Add support for forcing the next frame to be a keyframe

2011-07-28 11:54:16 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	* omx/gstomxvideoenc.h:
	  omxvideoenc: Add support for setting bitrate/quantization related parameters

2011-07-28 10:23:08 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	  omx: Add wrapper functions for OMX_[GS]et{Config,Parameter}

2011-07-28 09:54:53 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	  omx: Add macro to initialize OpenMAX structures

2011-07-28 09:08:38 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Don't output 0-byte buffers

2011-07-25 15:05:08 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Ensure that the pAppPrivate pointer in OMX buffers is set correctly

2011-07-25 13:19:06 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	* omx/gstomxvideoenc.c:
	  omxvideo{enc,dec}: Only set/unset flushing state on ports if they were created already

2011-07-25 12:01:05 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/Makefile.am:
	* omx/gstomx.c:
	* omx/gstomxwmvdec.c:
	* omx/gstomxwmvdec.h:
	  omxwmvdec: Add WMV video decoder element

2011-07-25 11:44:56 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/Makefile.am:
	* omx/gstomx.c:
	* omx/gstomxh263dec.c:
	* omx/gstomxh263dec.h:
	  omxh263dec: Add H.263 decoder element

2011-07-25 11:32:51 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/Makefile.am:
	* omx/gstomx.c:
	* omx/gstomxh264enc.c:
	* omx/gstomxh264enc.h:
	  omxh264enc: Add H.264 encoder element

2011-07-25 10:48:58 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Try harder to deallocate the buffers after errors happened

2011-07-25 10:47:28 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Try harder to deallocate the buffers after errors happened

2011-07-25 10:46:49 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Deallocate port buffers before freeing the component
	  They should be deallocated by the caller before reaching the
	  Loaded state but to be on the safe side we will make sure
	  they're really deallocated here.

2011-07-21 11:15:14 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Add initial support for stride conversion

2011-07-21 10:38:26 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxh264dec.c:
	* omx/gstomxmpeg4videodec.c:
	* omx/gstomxmpeg4videoenc.c:
	  omx: Set default roles for the components if none were set from the config file

2011-07-21 10:36:19 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Failure to set the component role is fatal

2011-07-21 07:53:25 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Add support for setting codec_data on the srcpad caps

2011-07-21 07:44:34 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Free/drop GstVideoFrames that resulted in an empty buffer

2011-07-21 07:44:10 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideoencoder.c:
	  basevideoencoder: Allow finishing of frames with no src_buffer to drop/free the GstVideoFrame

2011-07-21 07:31:05 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideoenc.c:
	  omxvideoenc: Remove obsolete TODO comment

2011-07-20 11:09:54 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/Makefile.am:
	* omx/gstomx.c:
	  omx: Use libgstopenmax.so for the plugin filename and openmax for the plugin name
	  Resolves conflicts with gst-openmax.

2011-07-20 08:34:33 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/Makefile.am:
	* omx/gstomx.c:
	* omx/gstomx.conf:
	* omx/gstomx.h:
	* omx/gstomxmpeg4videoenc.c:
	* omx/gstomxmpeg4videoenc.h:
	* omx/gstomxvideoenc.c:
	* omx/gstomxvideoenc.h:
	  omxvideoenc: Add video encoder base class and MPEG4 video encoder
	  Unfortunately requires lots of hacks again to work properly with
	  Bellagio.

2011-07-20 10:39:51 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideoencoder.c:
	  basevideoencoder: Only get caps from the subclass if they were not set yet by the subclass

2011-07-20 09:25:28 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideoencoder.c:
	* omx/gstbasevideoencoder.h:
	  basevideoencoder: Delay sending of serialized sink events until finish_frame()

2011-07-20 09:09:25 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideoencoder.c:
	* omx/gstbasevideoencoder.h:
	  basevideoencoder: Add ::reset vfunc and handle ::reset/::finish the same way as in the decoder

2011-07-19 12:50:43 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideoencoder.c:
	  basevideoencoder: Use a temporary GstVideoState until the subclass accepted the caps
	  Also store the caps in the GstVideoState and assume a PAR of 1/1 instead
	  of 0/1 if no PAR is specified in the caps.

2011-07-19 12:29:51 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomxvideodec.c:
	  omx: Improve debug output a bit

2011-07-19 10:33:54 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	* omx/gstomxvideodec.c:
	  omx: Rework port reconfiguration again and only use the Bellagio specific hacks with Bellagio
	  We only reconfigure ports that need to be reconfigured now instead of
	  always all ports.

2011-07-19 10:33:15 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.conf:
	* omx/gstomx.h:
	* omx/gstomxvideodec.c:
	* omx/gstomxvideodec.h:
	  omx: Add infrastructure to enable special hacks for broken OpenMAX implementations

2011-07-18 13:10:49 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: When acquiring a buffer from an input port always wait until all output ports are reconfigured

2011-07-18 08:41:20 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Add support for converting between omx and gst rowstrides

2011-07-14 10:34:09 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Provide all buffers to output ports after enabling them

2011-07-14 08:29:03 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Add support for NV12 / OMX_COLOR_FormatYUV420SemiPlanar

2011-07-14 07:58:41 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	* omx/gstomxvideodec.h:
	  omxvideodec: Only flush the component ports after we passed input to them

2011-07-13 21:19:34 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Only change states downwards if an upper state was reached

2011-07-13 20:37:02 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	* omx/gstomxvideodec.c:
	* omx/gstomxvideodec.h:
	  omx: Add support for setting the component-role

2011-07-13 20:22:51 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	* omx/gstomxvideodec.c:
	  omx: Improve error reporting by formatting the error codes better and also providing their string representation

2011-07-13 14:36:14 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* Makefile.am:
	  build: Dist autogen.sh

2011-07-13 14:35:51 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* configure.ac:
	* omx/gstomx.c:
	  build: Only require GStreamer >= 0.10.29 and GLib >= 2.16

2011-07-13 14:04:47 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/Makefile.am:
	  build: Dist gstomx.conf

2011-07-13 14:04:20 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* Makefile.am:
	  build: Clean _stdint.h on "make distclean"

2011-07-13 14:02:50 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Fix typo

2011-07-13 13:59:50 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/Makefile.am:
	  omx: Dist gstomx.h

2011-07-13 12:46:50 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Set SYNCFRAME flag on the OMX buffers for non-delta units

2011-07-13 12:37:44 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Free all pending frames when resetting the decoder
	  Workaround for https://bugzilla.gnome.org/show_bug.cgi?id=654529

2011-07-13 09:59:49 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Handle output buffers without a corresponding GstVideoFrame more gracefully
	  This can happen on EOS in some cases and when the input is not
	  properly framed.

2011-07-13 09:31:22 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Fix deadlock when finishing old frames that are left over by the decoder

2011-07-12 11:37:28 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxh264dec.c:
	  omxh264dec: It's called H.264, not H264

2011-07-12 11:36:42 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxh264dec.c:
	* omx/gstomxmpeg4videodec.c:
	* omx/gstomxvideodec.c:
	* omx/gstomxvideodec.h:
	  omxvideodec: Make sink/src pad template caps configurable

2011-07-12 11:13:50 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Allow to set a preferred configuration directory with the GST_OMX_CONFIG_DIR environment variable

2011-07-12 10:55:57 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxh264dec.c:
	* omx/gstomxmpeg4videodec.c:
	* omx/gstomxvideodec.c:
	  omxvideodec: Make core/component-name and in/outport index configurable

2011-07-12 10:05:31 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.conf:
	* omx/gstomx.h:
	  omx: Add initial version of configuration system
	  This now only registers elements that are specified in the
	  configuration file.
	  The configuration file is a keyfile in the first XDG configuration
	  directory with the name gstomx.conf.

2011-07-12 08:53:15 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/Makefile.am:
	* omx/gstomx.c:
	* omx/gstomxh264dec.c:
	* omx/gstomxh264dec.h:
	* omx/gstomxh264videodec.c:
	* omx/gstomxh264videodec.h:
	  omxh264dec: Rename from omxh264videodec to omxh264dec

2011-07-12 08:40:48 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxh264videodec.c:
	  omxh264videodec: Require alignment=au and stream-format={avc,bytestream}

2011-07-11 12:59:07 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideodecoder.c:
	  basevideodecoder: First inform subclass about resetting before resetting/freeing all internal state
	  The subclass might want to access the old state.

2011-07-11 12:36:42 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideodecoder.c:
	  basevideodecoder: Track present position on discont before resetting it

2011-07-11 11:52:33 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideodecoder.c:
	  basevideodecoder: Also protect the list of pending frames from concurrent access when pushing all pendings events

2011-07-11 11:28:40 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideocodec.c:
	* omx/gstbasevideocodec.h:
	* omx/gstbasevideodecoder.c:
	  basevideocodec: Protect access to the list of pending frames with the object lock
	  This is required if ::finish_frame() and all buffer output happens
	  on a different thread than the sinkpad streaming thread.

2011-07-11 09:35:25 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideodecoder.c:
	  basevideodecoder: Set the correct lists to NULL after freeing

2011-07-11 08:54:53 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideodecoder.c:
	  basevideodecoder: Work with a copy of the GstVideoState in setcaps until the caps are accepted
	  Also fix a refcount problem with the codec_data.

2011-07-12 08:34:44 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/Makefile.am:
	* omx/gstomx.c:
	* omx/gstomxh264videodec.c:
	* omx/gstomxh264videodec.h:
	  omxh264videodec: Add h.264 video decoder

2011-07-12 08:29:15 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxmpeg4videodec.c:
	  omxmpeg4videodec: Fix debug category name

2011-07-09 11:41:42 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/Makefile.am:
	* omx/gstbasevideocodec.h:
	* omx/gstbasevideodecoder.c:
	* omx/gstbasevideoencoder.c:
	* omx/gstbasevideoutils.c:
	* omx/gstbasevideoutils.h:
	  basevideo: Move the utils from the codec header to its own header

2011-07-09 11:32:06 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideocodec.c:
	* omx/gstbasevideodecoder.c:
	  basevideo: Use GSlice for allocating GstVideoFrame and don't duplicate code in the decoder base class

2011-07-09 11:05:37 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Use the destroy notify to free the coder_hook

2011-07-09 10:57:52 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideocodec.c:
	* omx/gstbasevideocodec.h:
	* omx/gstbasevideodecoder.c:
	  basevideo: Add destroy notify for the coder_hook to prevent memory leaks
	  Fixes bug #654293.

2011-07-09 10:44:16 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/Makefile.am:
	  basevideo: Fix GType names to not conflict with the public video base classes
	  It's still not possible to include headers of both in the same file
	  or compile/link both into the same plugin but that shouldn't be
	  necessary anyway.

2011-07-08 15:42:56 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Fix some minor memory leaks

2011-07-08 15:25:07 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	* omx/gstomxvideodec.c:
	  omx: Rework port reconfiguration
	  We always reconfigure all ports now if the settings of one
	  port changes to prevent lots of race conditions, dropped
	  frames and similar issues.

2011-07-08 13:16:45 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	* omx/gstomxvideodec.h:
	  omxvideodec: Use the frames storage of the base class instead of implementing our own
	  They could get out of sync and we could store already destroyed frames.

2011-07-07 12:51:03 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.h:
	  omx: Clarify GQueue/GPtrArray element types

2011-07-07 12:23:24 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	* omx/gstomxvideodec.c:
	  omx: Add more checks to acquire_buffer() and return the current state additional to the buffer
	  Also refactor the code flow in the video decoder for this. This makes
	  the usage of acquire_buffer() easier and more atomic.

2011-07-07 12:22:57 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Also flush/unflush the input port when changing the state PAUSED<->READY

2011-07-07 12:21:31 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Don't broadcast port->port_cond after allocating buffers successfully
	  Allocating buffers must happen while no thread is waiting for the
	  cond and especially must happen from the thread that would acquire
	  buffers from the port.

2011-07-07 11:27:15 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Don't leak the codec_data after sending it

2011-07-07 10:27:31 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Always check if the component is in an error state before waiting for a condition variable to be signalled
	  Otherwise we might wait forever because nothing is going to signal
	  the condition variable anymore.

2011-07-07 10:22:12 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Always hold port->port_lock before signalling port->port_cond when notifying about errors
	  Otherwise a port might be in the critical section, has checked the error state
	  already but waits after port->port_cond is signalled, which will lead
	  to a deadlock.

2011-07-07 10:07:43 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Remove reconfiguration test hack

2011-07-06 13:27:12 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Improve debug output a bit

2011-07-06 13:26:51 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Always try to deallocate buffers, even if there's a component error

2011-07-06 13:26:01 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	  omx: Use G_USEC_PER_SEC for clarity instead of 1000000

2011-07-06 13:19:15 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Error out if the GStreamer allocated buffer is smaller than the OpenMAX output buffer
	  Usually this must never happen but currently it happens during reconfigurations
	  because of a race condition. Still it's better than crashing.

2011-07-06 10:40:13 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	  omx: Don't use port_def.bEnabled to check if the Enable/Disable command is finished
	  bEnabled should be set immediately after sending the command, it's only
	  Bellagio that waits until the command is finished before setting it.

2011-07-06 10:30:11 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxvideodec.c:
	  omxvideodec: Remove obsolete FIXME comment

2011-07-06 10:29:54 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomx.c:
	* omx/gstomx.h:
	  omx: Improve error handling and reporting

2011-07-06 08:48:37 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstomxmpeg4videodec.c:
	* omx/gstomxvideodec.c:
	* omx/gstomxvideodec.h:
	  omxvideodec: Make the inport and outport index configurable by the subclass

2011-06-28 08:51:23 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/Makefile.am:
	* omx/gstomx.c:
	* omx/gstomx.h:
	* omx/gstomxmpeg4videodec.c:
	* omx/gstomxmpeg4videodec.h:
	* omx/gstomxvideodec.c:
	* omx/gstomxvideodec.h:
	  omx: Add initial version of OpenMAX framework, video decoder base class and MPEG4 video decoder
	  This currently hardcodes a lot of stuff but works at least.
	  Also adds a generic framework for handling OpenMAX cores, components
	  and ports.

2011-06-28 11:47:25 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideocodec.c:
	* omx/gstbasevideocodec.h:
	* omx/gstbasevideodecoder.c:
	* omx/gstbasevideodecoder.h:
	  basevideodecoder: Don't reorder serialized src events
	  And allow to drop EOS by the subclass if ::finish returns
	  DROPPED.
	  Fixes bug #653544.

2011-06-27 09:41:40 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideocodec.c:
	* omx/gstbasevideocodec.h:
	* omx/gstbasevideodecoder.c:
	  basevideo: Add the caps to the GstVideoState and clean up caps/codec_data properly

2011-06-27 09:37:03 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/gstbasevideocodec.c:
	* omx/gstbasevideocodec.h:
	* omx/gstbasevideodecoder.c:
	* omx/gstbasevideodecoder.h:
	* omx/gstbasevideoencoder.c:
	* omx/gstbasevideoencoder.h:
	* omx/gstbasevideoutils.c:
	  basevideo: Add video encoder/decoder base classes from gst-plugins-bad

2011-06-21 11:17:35 +0200  Sebastian Dröge <sebastian.droege@collabora.co.uk>

	* omx/openmax/OMX_Audio.h:
	* omx/openmax/OMX_Component.h:
	* omx/openmax/OMX_ComponentExt.h:
	* omx/openmax/OMX_ContentPipe.h:
	* omx/openmax/OMX_Core.h:
	* omx/openmax/OMX_CoreExt.h:
	* omx/openmax/OMX_IVCommon.h:
	* omx/openmax/OMX_Image.h:
	* omx/openmax/OMX_Index.h:
	* omx/openmax/OMX_IndexExt.h:
	* omx/openmax/OMX_Other.h:
	* omx/openmax/OMX_Types.h:
	* omx/openmax/OMX_Video.h:
	* omx/openmax/OMX_VideoExt.h:
	  openmax: Add OpenMAX IL 1.1.2 headers