/* GStreamer * Copyright (C) 1999,2000 Erik Walthinsen * 2005 Wim Taymans * 2005 Andy Wingo * Copyright (C) 2012 Collabora Ltd. * * gstnetclientclock.h: clock that synchronizes itself to a time provider over * the network * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Library General Public * License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Library General Public License for more details. * * You should have received a copy of the GNU Library General Public * License along with this library; if not, write to the * Free Software Foundation, Inc., 51 Franklin St, Fifth Floor, * Boston, MA 02110-1301, USA. */ /** * SECTION:gstnetclientclock * @short_description: Special clock that synchronizes to a remote time * provider. * @see_also: #GstClock, #GstNetTimeProvider, #GstPipeline * * This object implements a custom #GstClock that synchronizes its time * to a remote time provider such as #GstNetTimeProvider. * * A new clock is created with gst_net_client_clock_new() which takes the * address and port of the remote time provider along with a name and * an initial time. * * This clock will poll the time provider and will update its calibration * parameters based on the local and remote observations. * * The "round-trip" property limits the maximum round trip packets can take. * * Various parameters of the clock can be configured with the parent #GstClock * "timeout", "window-size" and "window-threshold" object properties. * * A #GstNetClientClock is typically set on a #GstPipeline with * gst_pipeline_use_clock(). * * If you set a #GstBus on the clock via the "bus" object property, it will * send @GST_MESSAGE_ELEMENT messages with an attached #GstStructure containing * statistics about clock accuracy and network traffic. */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "gstnettimepacket.h" #include "gstnetclientclock.h" #include GST_DEBUG_CATEGORY_STATIC (ncc_debug); #define GST_CAT_DEFAULT (ncc_debug) #define DEFAULT_ADDRESS "127.0.0.1" #define DEFAULT_PORT 5637 #define DEFAULT_TIMEOUT GST_SECOND #define DEFAULT_ROUNDTRIP_LIMIT GST_SECOND /* Minimum timeout will be immediately (ie, as fast as one RTT), but no * more often than 1/20th second (arbitrarily, to spread observations a little) */ #define DEFAULT_MINIMUM_UPDATE_INTERVAL (GST_SECOND / 20) /* Maximum number of clock updates we can skip before updating */ #define MAX_SKIPPED_UPDATES 5 enum { PROP_0, PROP_ADDRESS, PROP_PORT, PROP_ROUNDTRIP_LIMIT, PROP_MINIMUM_UPDATE_INTERVAL, PROP_BUS }; #define GST_NET_CLIENT_CLOCK_GET_PRIVATE(obj) \ (G_TYPE_INSTANCE_GET_PRIVATE ((obj), GST_TYPE_NET_CLIENT_CLOCK, GstNetClientClockPrivate)) struct _GstNetClientClockPrivate { GThread *thread; GSocket *socket; GSocketAddress *servaddr; GCancellable *cancel; GstClockTime timeout_expiration; GstClockTime roundtrip_limit; GstClockTime rtt_avg; GstClockTime minimum_update_interval; guint skipped_updates; gchar *address; gint port; GstBus *bus; }; #define _do_init \ GST_DEBUG_CATEGORY_INIT (ncc_debug, "netclock", 0, "Network client clock"); #define gst_net_client_clock_parent_class parent_class G_DEFINE_TYPE_WITH_CODE (GstNetClientClock, gst_net_client_clock, GST_TYPE_SYSTEM_CLOCK, _do_init); static void gst_net_client_clock_finalize (GObject * object); static void gst_net_client_clock_set_property (GObject * object, guint prop_id, const GValue * value, GParamSpec * pspec); static void gst_net_client_clock_get_property (GObject * object, guint prop_id, GValue * value, GParamSpec * pspec); static void gst_net_client_clock_stop (GstNetClientClock * self); static void gst_net_client_clock_class_init (GstNetClientClockClass * klass) { GObjectClass *gobject_class; gobject_class = G_OBJECT_CLASS (klass); g_type_class_add_private (klass, sizeof (GstNetClientClockPrivate)); gobject_class->finalize = gst_net_client_clock_finalize; gobject_class->get_property = gst_net_client_clock_get_property; gobject_class->set_property = gst_net_client_clock_set_property; g_object_class_install_property (gobject_class, PROP_ADDRESS, g_param_spec_string ("address", "address", "The IP address of the machine providing a time server", DEFAULT_ADDRESS, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); g_object_class_install_property (gobject_class, PROP_PORT, g_param_spec_int ("port", "port", "The port on which the remote server is listening", 0, G_MAXUINT16, DEFAULT_PORT, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); g_object_class_install_property (gobject_class, PROP_BUS, g_param_spec_object ("bus", "bus", "A GstBus on which to send clock status information", GST_TYPE_BUS, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); /** * GstNetClientClock::round-trip-limit: * * Maximum allowed round-trip for packets. If this property is set to a nonzero * value, all packets with a round-trip interval larger than this limit will be * ignored. This is useful for networks with severe and fluctuating transport * delays. Filtering out these packets increases stability of the synchronization. * On the other hand, the lower the limit, the higher the amount of filtered * packets. Empirical tests are typically necessary to estimate a good value * for the limit. * If the property is set to zero, the limit is disabled. * * Since: 1.4 */ g_object_class_install_property (gobject_class, PROP_ROUNDTRIP_LIMIT, g_param_spec_uint64 ("round-trip-limit", "round-trip limit", "Maximum tolerable round-trip interval for packets, in nanoseconds " "(0 = no limit)", 0, G_MAXUINT64, DEFAULT_ROUNDTRIP_LIMIT, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); g_object_class_install_property (gobject_class, PROP_MINIMUM_UPDATE_INTERVAL, g_param_spec_uint64 ("minimum-update-interval", "minimum update interval", "Minimum polling interval for packets, in nanoseconds" "(0 = no limit)", 0, G_MAXUINT64, DEFAULT_MINIMUM_UPDATE_INTERVAL, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); } static void gst_net_client_clock_init (GstNetClientClock * self) { GstClock *clock = GST_CLOCK_CAST (self); GstNetClientClockPrivate *priv; self->priv = priv = GST_NET_CLIENT_CLOCK_GET_PRIVATE (self); priv->port = DEFAULT_PORT; priv->address = g_strdup (DEFAULT_ADDRESS); gst_clock_set_timeout (clock, DEFAULT_TIMEOUT); priv->thread = NULL; priv->servaddr = NULL; priv->rtt_avg = GST_CLOCK_TIME_NONE; priv->roundtrip_limit = DEFAULT_ROUNDTRIP_LIMIT; priv->minimum_update_interval = DEFAULT_MINIMUM_UPDATE_INTERVAL; priv->skipped_updates = 0; } static void gst_net_client_clock_finalize (GObject * object) { GstNetClientClock *self = GST_NET_CLIENT_CLOCK (object); if (self->priv->thread) { gst_net_client_clock_stop (self); } g_free (self->priv->address); self->priv->address = NULL; if (self->priv->servaddr != NULL) { g_object_unref (self->priv->servaddr); self->priv->servaddr = NULL; } if (self->priv->socket != NULL) { g_socket_close (self->priv->socket, NULL); g_object_unref (self->priv->socket); self->priv->socket = NULL; } if (self->priv->bus != NULL) { gst_object_unref (self->priv->bus); self->priv->bus = NULL; } G_OBJECT_CLASS (parent_class)->finalize (object); } static void gst_net_client_clock_set_property (GObject * object, guint prop_id, const GValue * value, GParamSpec * pspec) { GstNetClientClock *self = GST_NET_CLIENT_CLOCK (object); switch (prop_id) { case PROP_ADDRESS: GST_OBJECT_LOCK (self); g_free (self->priv->address); self->priv->address = g_value_dup_string (value); if (self->priv->address == NULL) self->priv->address = g_strdup (DEFAULT_ADDRESS); GST_OBJECT_UNLOCK (self); break; case PROP_PORT: GST_OBJECT_LOCK (self); self->priv->port = g_value_get_int (value); GST_OBJECT_UNLOCK (self); break; case PROP_ROUNDTRIP_LIMIT: GST_OBJECT_LOCK (self); self->priv->roundtrip_limit = g_value_get_uint64 (value); GST_OBJECT_UNLOCK (self); break; case PROP_MINIMUM_UPDATE_INTERVAL: GST_OBJECT_LOCK (self); self->priv->minimum_update_interval = g_value_get_uint64 (value); GST_OBJECT_UNLOCK (self); break; case PROP_BUS: GST_OBJECT_LOCK (self); if (self->priv->bus) gst_object_unref (self->priv->bus); self->priv->bus = g_value_dup_object (value); GST_OBJECT_UNLOCK (self); break; default: G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec); break; } } static void gst_net_client_clock_get_property (GObject * object, guint prop_id, GValue * value, GParamSpec * pspec) { GstNetClientClock *self = GST_NET_CLIENT_CLOCK (object); switch (prop_id) { case PROP_ADDRESS: GST_OBJECT_LOCK (self); g_value_set_string (value, self->priv->address); GST_OBJECT_UNLOCK (self); break; case PROP_PORT: g_value_set_int (value, self->priv->port); break; case PROP_ROUNDTRIP_LIMIT: GST_OBJECT_LOCK (self); g_value_set_uint64 (value, self->priv->roundtrip_limit); GST_OBJECT_UNLOCK (self); break; case PROP_MINIMUM_UPDATE_INTERVAL: GST_OBJECT_LOCK (self); g_value_set_uint64 (value, self->priv->minimum_update_interval); GST_OBJECT_UNLOCK (self); break; case PROP_BUS: GST_OBJECT_LOCK (self); g_value_set_object (value, self->priv->bus); GST_OBJECT_UNLOCK (self); break; default: G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec); break; } } static void gst_net_client_clock_observe_times (GstNetClientClock * self, GstClockTime local_1, GstClockTime remote, GstClockTime local_2) { GstNetClientClockPrivate *priv = self->priv; GstClockTime current_timeout = 0; GstClockTime local_avg; gdouble r_squared; GstClock *clock; GstClockTime rtt, rtt_limit, min_update_interval; GstBus *bus = NULL; /* Use for discont tracking */ GstClockTime time_before = 0; GstClockTime min_guess = 0; GstClockTimeDiff time_discont = 0; gboolean synched, now_synched; GstClockTime internal_time, external_time, rate_num, rate_den; GstClockTime orig_internal_time, orig_external_time, orig_rate_num, orig_rate_den; GstClockTime max_discont; GST_OBJECT_LOCK (self); rtt_limit = self->priv->roundtrip_limit; min_update_interval = self->priv->minimum_update_interval; if (self->priv->bus) bus = gst_object_ref (self->priv->bus); GST_OBJECT_UNLOCK (self); if (local_2 < local_1) { GST_LOG_OBJECT (self, "Dropping observation: receive time %" GST_TIME_FORMAT " < send time %" GST_TIME_FORMAT, GST_TIME_ARGS (local_1), GST_TIME_ARGS (local_2)); goto bogus_observation; } rtt = GST_CLOCK_DIFF (local_1, local_2); if ((rtt_limit > 0) && (rtt > rtt_limit)) { GST_LOG_OBJECT (self, "Dropping observation: RTT %" GST_TIME_FORMAT " > limit %" GST_TIME_FORMAT, GST_TIME_ARGS (rtt), GST_TIME_ARGS (rtt_limit)); goto bogus_observation; } /* Track an average round trip time, for a bit of smoothing */ /* Always update before discarding a sample, so genuine changes in * the network get picked up, eventually */ if (priv->rtt_avg == GST_CLOCK_TIME_NONE) priv->rtt_avg = rtt; else if (rtt < priv->rtt_avg) /* Shorter RTTs carry more weight than longer */ priv->rtt_avg = (3 * priv->rtt_avg + rtt) / 4; else priv->rtt_avg = (15 * priv->rtt_avg + rtt) / 16; if (rtt > 2 * priv->rtt_avg) { GST_LOG_OBJECT (self, "Dropping observation, long RTT %" GST_TIME_FORMAT " > 2 * avg %" GST_TIME_FORMAT, GST_TIME_ARGS (rtt), GST_TIME_ARGS (priv->rtt_avg)); goto bogus_observation; } local_avg = (local_2 + local_1) / 2; GST_LOG_OBJECT (self, "local1 %" G_GUINT64_FORMAT " remote %" G_GUINT64_FORMAT " localavg %" G_GUINT64_FORMAT " local2 %" G_GUINT64_FORMAT, local_1, remote, local_avg, local_2); clock = GST_CLOCK_CAST (self); /* Store what the clock produced as 'now' before this update */ gst_clock_get_calibration (GST_CLOCK (self), &orig_internal_time, &orig_external_time, &orig_rate_num, &orig_rate_den); internal_time = orig_internal_time; external_time = orig_external_time; rate_num = orig_rate_num; rate_den = orig_rate_den; min_guess = gst_clock_adjust_with_calibration (GST_CLOCK (self), local_1, internal_time, external_time, rate_num, rate_den); time_before = gst_clock_adjust_with_calibration (GST_CLOCK (self), local_2, internal_time, external_time, rate_num, rate_den); /* Maximum discontinuity, when we're synched with the master. Could make this a property, * but this value seems to work fine */ max_discont = priv->rtt_avg / 4; /* If the remote observation was within a max_discont window around our min/max estimates, we're synched */ synched = (GST_CLOCK_DIFF (remote, min_guess) < (GstClockTimeDiff) (max_discont) && GST_CLOCK_DIFF (time_before, remote) < (GstClockTimeDiff) (max_discont)); if (gst_clock_add_observation_unapplied (GST_CLOCK (self), local_avg, remote, &r_squared, &internal_time, &external_time, &rate_num, &rate_den)) { /* Now compare the difference (discont) in the clock * after this observation */ time_discont = GST_CLOCK_DIFF (time_before, gst_clock_adjust_with_calibration (GST_CLOCK (self), local_2, internal_time, external_time, rate_num, rate_den)); /* If we were in sync with the remote clock, clamp the allowed * discontinuity to within quarter of one RTT. In sync means our send/receive estimates * of remote time correctly windowed the actual remote time observation */ if (synched && ABS (time_discont) > max_discont) { GstClockTimeDiff offset; GST_DEBUG_OBJECT (clock, "Too large a discont, clamping to 1/4 average RTT = %" GST_TIME_FORMAT, GST_TIME_ARGS (max_discont)); if (time_discont > 0) { /* Too large a forward step - add a -ve offset */ offset = max_discont - time_discont; if (-offset > external_time) external_time = 0; else external_time += offset; } else { /* Too large a backward step - add a +ve offset */ offset = -(max_discont + time_discont); external_time += offset; } time_discont += offset; } /* Check if the new clock params would have made our observation within range */ now_synched = (GST_CLOCK_DIFF (remote, gst_clock_adjust_with_calibration (GST_CLOCK (self), local_1, internal_time, external_time, rate_num, rate_den)) < (GstClockTimeDiff) (max_discont)) && (GST_CLOCK_DIFF (gst_clock_adjust_with_calibration (GST_CLOCK (self), local_2, internal_time, external_time, rate_num, rate_den), remote) < (GstClockTimeDiff) (max_discont)); /* Only update the clock if we had synch or just gained it */ if (synched || now_synched || priv->skipped_updates > MAX_SKIPPED_UPDATES) { gst_clock_set_calibration (GST_CLOCK (self), internal_time, external_time, rate_num, rate_den); /* ghetto formula - shorter timeout for bad correlations */ current_timeout = (1e-3 / (1 - MIN (r_squared, 0.99999))) * GST_SECOND; current_timeout = MIN (current_timeout, gst_clock_get_timeout (clock)); priv->skipped_updates = 0; } else { /* Restore original calibration vars for the report, we're not changing the clock */ internal_time = orig_internal_time; external_time = orig_external_time; rate_num = orig_rate_num; rate_den = orig_rate_den; time_discont = 0; priv->skipped_updates++; } } /* Limit the polling to at most one per minimum_update_interval */ if (rtt < min_update_interval) current_timeout = MAX (min_update_interval - rtt, current_timeout); if (bus) { GstStructure *s; GstMessage *msg; /* Output a stats message, whether we updated the clock or not */ s = gst_structure_new ("gst-netclock-statistics", "synchronised", G_TYPE_BOOLEAN, synched, "rtt", G_TYPE_UINT64, rtt, "rtt-average", G_TYPE_UINT64, priv->rtt_avg, "local", G_TYPE_UINT64, local_avg, "remote", G_TYPE_UINT64, remote, "discontinuity", G_TYPE_INT64, time_discont, "remote-min-estimate", G_TYPE_UINT64, min_guess, "remote-max-estimate", G_TYPE_UINT64, time_before, "remote-min-error", G_TYPE_INT64, GST_CLOCK_DIFF (remote, min_guess), "remote-max-error", G_TYPE_INT64, GST_CLOCK_DIFF (remote, time_before), "request-send", G_TYPE_UINT64, local_1, "request-receive", G_TYPE_UINT64, local_2, "r-squared", G_TYPE_DOUBLE, r_squared, "timeout", G_TYPE_UINT64, current_timeout, "internal-time", G_TYPE_UINT64, internal_time, "external-time", G_TYPE_UINT64, external_time, "rate-num", G_TYPE_UINT64, rate_num, "rate-den", G_TYPE_UINT64, rate_den, "rate", G_TYPE_DOUBLE, (gdouble) (rate_num) / rate_den, "local-clock-offset", G_TYPE_INT64, GST_CLOCK_DIFF (internal_time, external_time), NULL); msg = gst_message_new_element (GST_OBJECT (self), s); gst_bus_post (bus, msg); } GST_INFO ("next timeout: %" GST_TIME_FORMAT, GST_TIME_ARGS (current_timeout)); self->priv->timeout_expiration = gst_util_get_timestamp () + current_timeout; if (bus) gst_object_unref (bus); return; bogus_observation: if (bus) gst_object_unref (bus); /* Schedule a new packet again soon */ self->priv->timeout_expiration = gst_util_get_timestamp () + (GST_SECOND / 4); return; } static gpointer gst_net_client_clock_thread (gpointer data) { GstNetClientClock *self = data; GstNetTimePacket *packet; GSocket *socket = self->priv->socket; GError *err = NULL; GstClock *clock = data; GST_INFO_OBJECT (self, "net client clock thread running, socket=%p", socket); g_socket_set_blocking (socket, TRUE); g_socket_set_timeout (socket, 0); while (!g_cancellable_is_cancelled (self->priv->cancel)) { GstClockTime expiration_time = self->priv->timeout_expiration; GstClockTime now = gst_util_get_timestamp (); gint64 socket_timeout; if (now >= expiration_time || (expiration_time - now) <= GST_MSECOND) { socket_timeout = 0; } else { socket_timeout = (expiration_time - now) / GST_USECOND; } GST_TRACE_OBJECT (self, "timeout: %" G_GINT64_FORMAT "us", socket_timeout); if (!g_socket_condition_timed_wait (socket, G_IO_IN, socket_timeout, self->priv->cancel, &err)) { /* cancelled, timeout or error */ if (err->code == G_IO_ERROR_CANCELLED) { GST_INFO_OBJECT (self, "cancelled"); g_clear_error (&err); break; } else if (err->code == G_IO_ERROR_TIMED_OUT) { /* timed out, let's send another packet */ GST_DEBUG_OBJECT (self, "timed out"); packet = gst_net_time_packet_new (NULL); packet->local_time = gst_clock_get_internal_time (GST_CLOCK (self)); GST_DEBUG_OBJECT (self, "sending packet, local time = %" GST_TIME_FORMAT, GST_TIME_ARGS (packet->local_time)); gst_net_time_packet_send (packet, self->priv->socket, self->priv->servaddr, NULL); g_free (packet); /* reset timeout (but are expecting a response sooner anyway) */ self->priv->timeout_expiration = gst_util_get_timestamp () + gst_clock_get_timeout (clock); } else { GST_DEBUG_OBJECT (self, "socket error: %s", err->message); g_usleep (G_USEC_PER_SEC / 10); /* throttle */ } g_clear_error (&err); } else { GstClockTime new_local; /* got packet */ new_local = gst_clock_get_internal_time (GST_CLOCK (self)); packet = gst_net_time_packet_receive (socket, NULL, &err); if (packet != NULL) { GST_LOG_OBJECT (self, "got packet back"); GST_LOG_OBJECT (self, "local_1 = %" GST_TIME_FORMAT, GST_TIME_ARGS (packet->local_time)); GST_LOG_OBJECT (self, "remote = %" GST_TIME_FORMAT, GST_TIME_ARGS (packet->remote_time)); GST_LOG_OBJECT (self, "local_2 = %" GST_TIME_FORMAT, GST_TIME_ARGS (new_local)); /* observe_times will reset the timeout */ gst_net_client_clock_observe_times (self, packet->local_time, packet->remote_time, new_local); g_free (packet); } else if (err != NULL) { GST_WARNING_OBJECT (self, "receive error: %s", err->message); g_clear_error (&err); } } } GST_INFO_OBJECT (self, "shutting down net client clock thread"); return NULL; } static gboolean gst_net_client_clock_start (GstNetClientClock * self) { GSocketAddress *servaddr; GSocketAddress *myaddr; GSocketAddress *anyaddr; GInetAddress *inetaddr; GSocket *socket; GError *error = NULL; GSocketFamily family; g_return_val_if_fail (self->priv->address != NULL, FALSE); g_return_val_if_fail (self->priv->servaddr == NULL, FALSE); /* create target address */ inetaddr = g_inet_address_new_from_string (self->priv->address); if (inetaddr == NULL) goto bad_address; family = g_inet_address_get_family (inetaddr); servaddr = g_inet_socket_address_new (inetaddr, self->priv->port); g_object_unref (inetaddr); g_assert (servaddr != NULL); GST_DEBUG_OBJECT (self, "will communicate with %s:%d", self->priv->address, self->priv->port); socket = g_socket_new (family, G_SOCKET_TYPE_DATAGRAM, G_SOCKET_PROTOCOL_UDP, &error); if (socket == NULL) goto no_socket; GST_DEBUG_OBJECT (self, "binding socket"); inetaddr = g_inet_address_new_any (family); anyaddr = g_inet_socket_address_new (inetaddr, 0); g_socket_bind (socket, anyaddr, TRUE, &error); g_object_unref (anyaddr); g_object_unref (inetaddr); if (error != NULL) goto bind_error; /* check address we're bound to, mostly for debugging purposes */ myaddr = g_socket_get_local_address (socket, &error); if (myaddr == NULL) goto getsockname_error; GST_DEBUG_OBJECT (self, "socket opened on UDP port %hd", g_inet_socket_address_get_port (G_INET_SOCKET_ADDRESS (myaddr))); g_object_unref (myaddr); self->priv->cancel = g_cancellable_new (); self->priv->socket = socket; self->priv->servaddr = G_SOCKET_ADDRESS (servaddr); self->priv->thread = g_thread_try_new ("GstNetClientClock", gst_net_client_clock_thread, self, &error); if (error != NULL) goto no_thread; return TRUE; /* ERRORS */ no_socket: { GST_ERROR_OBJECT (self, "socket_new() failed: %s", error->message); g_error_free (error); return FALSE; } bind_error: { GST_ERROR_OBJECT (self, "bind failed: %s", error->message); g_error_free (error); g_object_unref (socket); return FALSE; } getsockname_error: { GST_ERROR_OBJECT (self, "get_local_address() failed: %s", error->message); g_error_free (error); g_object_unref (socket); return FALSE; } bad_address: { GST_ERROR_OBJECT (self, "inet_address_new_from_string('%s') failed", self->priv->address); return FALSE; } no_thread: { GST_ERROR_OBJECT (self, "could not create thread: %s", error->message); g_object_unref (self->priv->servaddr); self->priv->servaddr = NULL; g_object_unref (self->priv->socket); self->priv->socket = NULL; g_error_free (error); return FALSE; } } static void gst_net_client_clock_stop (GstNetClientClock * self) { if (self->priv->thread == NULL) return; GST_INFO_OBJECT (self, "stopping..."); g_cancellable_cancel (self->priv->cancel); g_thread_join (self->priv->thread); self->priv->thread = NULL; g_object_unref (self->priv->cancel); self->priv->cancel = NULL; g_object_unref (self->priv->servaddr); self->priv->servaddr = NULL; g_object_unref (self->priv->socket); self->priv->socket = NULL; GST_INFO_OBJECT (self, "stopped"); } /** * gst_net_client_clock_new: * @name: a name for the clock * @remote_address: the address of the remote clock provider * @remote_port: the port of the remote clock provider * @base_time: initial time of the clock * * Create a new #GstNetClientClock that will report the time * provided by the #GstNetTimeProvider on @remote_address and * @remote_port. * * Returns: a new #GstClock that receives a time from the remote * clock. */ GstClock * gst_net_client_clock_new (const gchar * name, const gchar * remote_address, gint remote_port, GstClockTime base_time) { /* FIXME: gst_net_client_clock_new() should be a thin wrapper for g_object_new() */ GstNetClientClock *ret; GstClockTime internal; g_return_val_if_fail (remote_address != NULL, NULL); g_return_val_if_fail (remote_port > 0, NULL); g_return_val_if_fail (remote_port <= G_MAXUINT16, NULL); g_return_val_if_fail (base_time != GST_CLOCK_TIME_NONE, NULL); ret = g_object_new (GST_TYPE_NET_CLIENT_CLOCK, "address", remote_address, "port", remote_port, NULL); /* gst_clock_get_time() values are guaranteed to be increasing. because no one * has called get_time on this clock yet we are free to adjust to any value * without worrying about worrying about MAX() issues with the clock's * internal time. */ /* update our internal time so get_time() give something around base_time. assume that the rate is 1 in the beginning. */ internal = gst_clock_get_internal_time (GST_CLOCK (ret)); gst_clock_set_calibration (GST_CLOCK (ret), internal, base_time, 1, 1); { GstClockTime now = gst_clock_get_time (GST_CLOCK (ret)); if (GST_CLOCK_DIFF (now, base_time) > 0 || GST_CLOCK_DIFF (now, base_time + GST_SECOND) < 0) { g_warning ("unable to set the base time, expect sync problems!"); } } if (!gst_net_client_clock_start (ret)) goto failed_start; /* all systems go, cap'n */ return (GstClock *) ret; failed_start: { /* already printed a nice error */ gst_object_unref (ret); return NULL; } }