#GstMeta for carrying SMPTE-291M Ancillary data. Note that all the ADF fields (@DID to @checksum) are 10bit values with parity/non-parity high-bits set. Parent #GstMeta The field where the ancillary data is located Which channel (luminance or chrominance) the ancillary data is located. 0 if content is SD or stored in the luminance channel (default). 1 if HD and stored in the chrominance channel. The line on which the ancillary data is located (max 11bit). There are two special values: 0x7ff if no line is specified (default), 0x7fe to specify the ancillary data is on any valid line before active video The location of the ancillary data packet in a SDI raster relative to the start of active video (max 12bits). A value of 0 means the ADF of the ancillary packet starts immediately following SAV. There are 3 special values: 0xfff: No specified location (default), 0xffe: within HANC data space, 0xffd: within the ancillary data space located between SAV and EAV Data Identified Secondary Data identification (if type 2) or Data block number (if type 1) The amount of user data The User data The checksum of the ADF Location of a @GstAncillaryMeta. Progressive or no field specified (default) Interlaced first field Interlaced second field A bufferpool option to enable extra padding. When a bufferpool supports this option, gst_buffer_pool_config_set_video_alignment() can be called. When this option is enabled on the bufferpool, #GST_BUFFER_POOL_OPTION_VIDEO_META should also be enabled. An option that can be activated on a bufferpool to request gl texture upload meta on buffers from the pool. When this option is enabled on the bufferpool, @GST_BUFFER_POOL_OPTION_VIDEO_META should also be enabled. An option that can be activated on bufferpool to request video metadata on buffers from the pool. Name of the caps feature indicating that the stream is interlaced. Currently it is only used for video with 'interlace-mode=alternate' to ensure backwards compatibility for this new mode. In this mode each buffer carries a single field of interlaced video. @GST_VIDEO_BUFFER_FLAG_TOP_FIELD and @GST_VIDEO_BUFFER_FLAG_BOTTOM_FIELD indicate whether the buffer carries a top or bottom field. The order of buffers/fields in the stream and the timestamps on the buffers indicate the temporal order of the fields. Top and bottom fields are expected to alternate in this mode. The frame rate in the caps still signals the frame rate, so the notional field rate will be twice the frame rate from the caps (see @GST_VIDEO_INFO_FIELD_RATE_N). This interface is implemented by elements which can perform some color balance operation on video frames they process. For example, modifying the brightness, contrast, hue or saturation. Example elements are 'xvimagesink' and 'colorbalance' Get the #GstColorBalanceType of this implementation. A the #GstColorBalanceType. The #GstColorBalance implementation Retrieve the current value of the indicated channel, between min_value and max_value. See Also: The #GstColorBalanceChannel.min_value and #GstColorBalanceChannel.max_value members of the #GstColorBalanceChannel object. The current value of the channel. A #GstColorBalance instance A #GstColorBalanceChannel instance Retrieve a list of the available channels. A GList containing pointers to #GstColorBalanceChannel objects. The list is owned by the #GstColorBalance instance and must not be freed. A #GstColorBalance instance Sets the current value of the channel to the passed value, which must be between min_value and max_value. See Also: The #GstColorBalanceChannel.min_value and #GstColorBalanceChannel.max_value members of the #GstColorBalanceChannel object. A #GstColorBalance instance A #GstColorBalanceChannel instance The new value for the channel. A helper function called by implementations of the GstColorBalance interface. It fires the #GstColorBalance::value-changed signal on the instance, and the #GstColorBalanceChannel::value-changed signal on the channel object. A #GstColorBalance instance A #GstColorBalanceChannel whose value has changed The new value of the channel Get the #GstColorBalanceType of this implementation. A the #GstColorBalanceType. The #GstColorBalance implementation Retrieve the current value of the indicated channel, between min_value and max_value. See Also: The #GstColorBalanceChannel.min_value and #GstColorBalanceChannel.max_value members of the #GstColorBalanceChannel object. The current value of the channel. A #GstColorBalance instance A #GstColorBalanceChannel instance Retrieve a list of the available channels. A GList containing pointers to #GstColorBalanceChannel objects. The list is owned by the #GstColorBalance instance and must not be freed. A #GstColorBalance instance Sets the current value of the channel to the passed value, which must be between min_value and max_value. See Also: The #GstColorBalanceChannel.min_value and #GstColorBalanceChannel.max_value members of the #GstColorBalanceChannel object. A #GstColorBalance instance A #GstColorBalanceChannel instance The new value for the channel. A helper function called by implementations of the GstColorBalance interface. It fires the #GstColorBalance::value-changed signal on the instance, and the #GstColorBalanceChannel::value-changed signal on the channel object. A #GstColorBalance instance A #GstColorBalanceChannel whose value has changed The new value of the channel Fired when the value of the indicated channel has changed. The #GstColorBalanceChannel The new value The #GstColorBalanceChannel object represents a parameter for modifying the color balance implemented by an element providing the #GstColorBalance interface. For example, Hue or Saturation. A string containing a descriptive name for this channel The minimum valid value for this channel. The maximum valid value for this channel. Fired when the value of the indicated channel has changed. The new value Color-balance channel class. the parent class Color-balance interface. the parent interface A GList containing pointers to #GstColorBalanceChannel objects. The list is owned by the #GstColorBalance instance and must not be freed. A #GstColorBalance instance A #GstColorBalance instance A #GstColorBalanceChannel instance The new value for the channel. The current value of the channel. A #GstColorBalance instance A #GstColorBalanceChannel instance A the #GstColorBalanceType. The #GstColorBalance implementation A #GstColorBalance instance A #GstColorBalanceChannel whose value has changed The new value of the channel An enumeration indicating whether an element implements color balancing operations in software or in dedicated hardware. In general, dedicated hardware implementations (such as those provided by xvimagesink) are preferred. Color balance is implemented with dedicated hardware. Color balance is implemented via software processing. This metadata stays relevant as long as video colorspace is unchanged. This metadata stays relevant as long as video orientation is unchanged. This metadata stays relevant as long as video size is unchanged. This metadata is relevant for video streams. The Navigation interface is used for creating and injecting navigation related events such as mouse button presses, cursor motion and key presses. The associated library also provides methods for parsing received events, and for sending and receiving navigation related bus events. One main usecase is DVD menu navigation. The main parts of the API are: * The GstNavigation interface, implemented by elements which provide an application with the ability to create and inject navigation events into the pipeline. * GstNavigation event handling API. GstNavigation events are created in response to calls on a GstNavigation interface implementation, and sent in the pipeline. Upstream elements can use the navigation event API functions to parse the contents of received messages. * GstNavigation message handling API. GstNavigation messages may be sent on the message bus to inform applications of navigation related changes in the pipeline, such as the mouse moving over a clickable region, or the set of available angles changing. The GstNavigation message functions provide functions for creating and parsing custom bus messages for signaling GstNavigation changes. Try to retrieve x and y coordinates of a #GstNavigation event. A boolean indicating success. The #GstEvent to inspect. Pointer to a gdouble to receive the x coordinate of the navigation event. Pointer to a gdouble to receive the y coordinate of the navigation event. Inspect a #GstEvent and return the #GstNavigationEventType of the event, or #GST_NAVIGATION_EVENT_INVALID if the event is not a #GstNavigation event. A #GstEvent to inspect. Create a new navigation event given navigation command.. a new #GstEvent The navigation command to use. Create a new navigation event for the given key press. a new #GstEvent A string identifying the key press. a bit-mask representing the state of the modifier keys (e.g. Control, Shift and Alt). Create a new navigation event for the given key release. a new #GstEvent A string identifying the released key. a bit-mask representing the state of the modifier keys (e.g. Control, Shift and Alt). Create a new navigation event for the given key mouse button press. a new #GstEvent The number of the pressed mouse button. The x coordinate of the mouse cursor. The y coordinate of the mouse cursor. a bit-mask representing the state of the modifier keys (e.g. Control, Shift and Alt). Create a new navigation event for the given key mouse button release. a new #GstEvent The number of the released mouse button. The x coordinate of the mouse cursor. The y coordinate of the mouse cursor. a bit-mask representing the state of the modifier keys (e.g. Control, Shift and Alt). Create a new navigation event for the given key mouse double click. a new #GstEvent The number of the pressed mouse button. The x coordinate of the mouse cursor. The y coordinate of the mouse cursor. a bit-mask representing the state of the modifier keys (e.g. Control, Shift and Alt). Create a new navigation event for the new mouse location. a new #GstEvent The x coordinate of the mouse cursor. The y coordinate of the mouse cursor. a bit-mask representing the state of the modifier keys (e.g. Control, Shift and Alt). Create a new navigation event for the mouse scroll. a new #GstEvent The x coordinate of the mouse cursor. The y coordinate of the mouse cursor. The x component of the scroll movement. The y component of the scroll movement. a bit-mask representing the state of the modifier keys (e.g. Control, Shift and Alt). Create a new navigation event signalling that all currently active touch points are cancelled and should be discarded. For example, under Wayland this event might be sent when a swipe passes the threshold to be recognized as a gesture by the compositor. a new #GstEvent a bit-mask representing the state of the modifier keys (e.g. Control, Shift and Alt). Create a new navigation event for an added touch point. a new #GstEvent A number uniquely identifying this touch point. It must stay unique to this touch point at least until an up event is sent for the same identifier, or all touch points are cancelled. The x coordinate of the new touch point. The y coordinate of the new touch point. Pressure data of the touch point, from 0.0 to 1.0, or NaN if no data is available. a bit-mask representing the state of the modifier keys (e.g. Control, Shift and Alt). Create a new navigation event signalling the end of a touch frame. Touch frames signal that all previous down, motion and up events not followed by another touch frame event already should be considered simultaneous. a new #GstEvent a bit-mask representing the state of the modifier keys (e.g. Control, Shift and Alt). Create a new navigation event for a moved touch point. a new #GstEvent A number uniquely identifying this touch point. It must correlate to exactly one previous touch_start event. The x coordinate of the touch point. The y coordinate of the touch point. Pressure data of the touch point, from 0.0 to 1.0, or NaN if no data is available. a bit-mask representing the state of the modifier keys (e.g. Control, Shift and Alt). Create a new navigation event for a removed touch point. a new #GstEvent A number uniquely identifying this touch point. It must correlate to exactly one previous down event, but can be reused after sending this event. The x coordinate of the touch point. The y coordinate of the touch point. a bit-mask representing the state of the modifier keys (e.g. Control, Shift and Alt). Inspect a #GstNavigation command event and retrieve the enum value of the associated command. TRUE if the navigation command could be extracted, otherwise FALSE. A #GstEvent to inspect. Pointer to GstNavigationCommand to receive the type of the navigation event. Note: Modifier keys (as defined in #GstNavigationModifierType) [press](GST_NAVIGATION_EVENT_KEY_PRESS) and [release](GST_NAVIGATION_KEY_PRESS) events are generated even if those states are present on all other related events A #GstEvent to inspect. A pointer to a location to receive the string identifying the key press. The returned string is owned by the event, and valid only until the event is unreffed. TRUE if the event is a #GstNavigation event with associated modifiers state, otherwise FALSE. The #GstEvent to modify. a bit-mask representing the state of the modifier keys (e.g. Control, Shift and Alt). Retrieve the details of either a #GstNavigation mouse button press event or a mouse button release event. Determine which type the event is using gst_navigation_event_get_type() to retrieve the #GstNavigationEventType. TRUE if the button number and both coordinates could be extracted, otherwise FALSE. A #GstEvent to inspect. Pointer to a gint that will receive the button number associated with the event. Pointer to a gdouble to receive the x coordinate of the mouse button event. Pointer to a gdouble to receive the y coordinate of the mouse button event. Inspect a #GstNavigation mouse movement event and extract the coordinates of the event. TRUE if both coordinates could be extracted, otherwise FALSE. A #GstEvent to inspect. Pointer to a gdouble to receive the x coordinate of the mouse movement. Pointer to a gdouble to receive the y coordinate of the mouse movement. Inspect a #GstNavigation mouse scroll event and extract the coordinates of the event. TRUE if all coordinates could be extracted, otherwise FALSE. A #GstEvent to inspect. Pointer to a gdouble to receive the x coordinate of the mouse movement. Pointer to a gdouble to receive the y coordinate of the mouse movement. Pointer to a gdouble to receive the delta_x coordinate of the mouse movement. Pointer to a gdouble to receive the delta_y coordinate of the mouse movement. Retrieve the details of a #GstNavigation touch-down or touch-motion event. Determine which type the event is using gst_navigation_event_get_type() to retrieve the #GstNavigationEventType. TRUE if all details could be extracted, otherwise FALSE. A #GstEvent to inspect. Pointer to a guint that will receive the identifier unique to this touch point. Pointer to a gdouble that will receive the x coordinate of the touch event. Pointer to a gdouble that will receive the y coordinate of the touch event. Pointer to a gdouble that will receive the force of the touch event, in the range from 0.0 to 1.0. If pressure data is not available, NaN will be set instead. Retrieve the details of a #GstNavigation touch-up event. TRUE if all details could be extracted, otherwise FALSE. A #GstEvent to inspect. Pointer to a guint that will receive the identifier unique to this touch point. Pointer to a gdouble that will receive the x coordinate of the touch event. Pointer to a gdouble that will receive the y coordinate of the touch event. Try to set x and y coordinates on a #GstNavigation event. The event must be writable. A boolean indicating success. The #GstEvent to modify. The x coordinate to set. The y coordinate to set. Check a bus message to see if it is a #GstNavigation event, and return the #GstNavigationMessageType identifying the type of the message if so. The type of the #GstMessage, or #GST_NAVIGATION_MESSAGE_INVALID if the message is not a #GstNavigation notification. A #GstMessage to inspect. Creates a new #GstNavigation message with type #GST_NAVIGATION_MESSAGE_ANGLES_CHANGED for notifying an application that the current angle, or current number of angles available in a multiangle video has changed. The new #GstMessage. A #GstObject to set as source of the new message. The currently selected angle. The number of viewing angles now available. Creates a new #GstNavigation message with type #GST_NAVIGATION_MESSAGE_COMMANDS_CHANGED The new #GstMessage. A #GstObject to set as source of the new message. Creates a new #GstNavigation message with type #GST_NAVIGATION_MESSAGE_EVENT. The new #GstMessage. A #GstObject to set as source of the new message. A navigation #GstEvent Creates a new #GstNavigation message with type #GST_NAVIGATION_MESSAGE_MOUSE_OVER. The new #GstMessage. A #GstObject to set as source of the new message. %TRUE if the mouse has entered a clickable area of the display. %FALSE if it over a non-clickable area. Parse a #GstNavigation message of type GST_NAVIGATION_MESSAGE_ANGLES_CHANGED and extract the @cur_angle and @n_angles parameters. %TRUE if the message could be successfully parsed. %FALSE if not. A #GstMessage to inspect. A pointer to a #guint to receive the new current angle number, or NULL A pointer to a #guint to receive the new angle count, or NULL. Parse a #GstNavigation message of type #GST_NAVIGATION_MESSAGE_EVENT and extract contained #GstEvent. The caller must unref the @event when done with it. %TRUE if the message could be successfully parsed. %FALSE if not. A #GstMessage to inspect. a pointer to a #GstEvent to receive the contained navigation event. Parse a #GstNavigation message of type #GST_NAVIGATION_MESSAGE_MOUSE_OVER and extract the active/inactive flag. If the mouse over event is marked active, it indicates that the mouse is over a clickable area. %TRUE if the message could be successfully parsed. %FALSE if not. A #GstMessage to inspect. A pointer to a gboolean to receive the active/inactive state, or NULL. Inspect a #GstQuery and return the #GstNavigationQueryType associated with it if it is a #GstNavigation query. The #GstNavigationQueryType of the query, or #GST_NAVIGATION_QUERY_INVALID The query to inspect Create a new #GstNavigation angles query. When executed, it will query the pipeline for the set of currently available angles, which may be greater than one in a multiangle video. The new query. Create a new #GstNavigation commands query. When executed, it will query the pipeline for the set of currently available commands. The new query. Parse the current angle number in the #GstNavigation angles @query into the #guint pointed to by the @cur_angle variable, and the number of available angles into the #guint pointed to by the @n_angles variable. %TRUE if the query could be successfully parsed. %FALSE if not. a #GstQuery Pointer to a #guint into which to store the currently selected angle value from the query, or NULL Pointer to a #guint into which to store the number of angles value from the query, or NULL Parse the number of commands in the #GstNavigation commands @query. %TRUE if the query could be successfully parsed. %FALSE if not. a #GstQuery the number of commands in this query. Parse the #GstNavigation command query and retrieve the @nth command from it into @cmd. If the list contains less elements than @nth, @cmd will be set to #GST_NAVIGATION_COMMAND_INVALID. %TRUE if the query could be successfully parsed. %FALSE if not. a #GstQuery the nth command to retrieve. a pointer to store the nth command into. Set the #GstNavigation angles query result field in @query. a #GstQuery the current viewing angle to set. the number of viewing angles to set. Set the #GstNavigation command query result fields in @query. The number of commands passed must be equal to @n_commands. a #GstQuery the number of commands to set. A list of @GstNavigationCommand values, @n_cmds entries long. Set the #GstNavigation command query result fields in @query. The number of commands passed must be equal to @n_commands. a #GstQuery the number of commands to set. An array containing @n_cmds @GstNavigationCommand values. sending a navigation event. Use #GstNavigationInterface.send_event_simple() instead. Sends an event to the navigation interface. The navigation interface instance The event to send Sends the indicated command to the navigation interface. The navigation interface instance The command to issue Sends an event to the navigation interface. The navigation interface instance The event to send The navigation interface instance The type of the key event. Recognised values are "key-press" and "key-release" Character representation of the key. This is typically as produced by XKeysymToString. Sends a mouse event to the navigation interface. Mouse event coordinates are sent relative to the display space of the related output area. This is usually the size in pixels of the window associated with the element implementing the #GstNavigation interface. The navigation interface instance The type of mouse event, as a text string. Recognised values are "mouse-button-press", "mouse-button-release", "mouse-move" and "mouse-double-click". The button number of the button being pressed or released. Pass 0 for mouse-move events. The x coordinate of the mouse event. The y coordinate of the mouse event. Sends a mouse scroll event to the navigation interface. Mouse event coordinates are sent relative to the display space of the related output area. This is usually the size in pixels of the window associated with the element implementing the #GstNavigation interface. The navigation interface instance The x coordinate of the mouse event. The y coordinate of the mouse event. The delta_x coordinate of the mouse event. The delta_y coordinate of the mouse event. A set of commands that may be issued to an element providing the #GstNavigation interface. The available commands can be queried via the gst_navigation_query_new_commands() query. For convenience in handling DVD navigation, the MENU commands are aliased as: GST_NAVIGATION_COMMAND_DVD_MENU = @GST_NAVIGATION_COMMAND_MENU1 GST_NAVIGATION_COMMAND_DVD_TITLE_MENU = @GST_NAVIGATION_COMMAND_MENU2 GST_NAVIGATION_COMMAND_DVD_ROOT_MENU = @GST_NAVIGATION_COMMAND_MENU3 GST_NAVIGATION_COMMAND_DVD_SUBPICTURE_MENU = @GST_NAVIGATION_COMMAND_MENU4 GST_NAVIGATION_COMMAND_DVD_AUDIO_MENU = @GST_NAVIGATION_COMMAND_MENU5 GST_NAVIGATION_COMMAND_DVD_ANGLE_MENU = @GST_NAVIGATION_COMMAND_MENU6 GST_NAVIGATION_COMMAND_DVD_CHAPTER_MENU = @GST_NAVIGATION_COMMAND_MENU7 An invalid command entry Execute navigation menu command 1. For DVD, this enters the DVD root menu, or exits back to the title from the menu. Execute navigation menu command 2. For DVD, this jumps to the DVD title menu. Execute navigation menu command 3. For DVD, this jumps into the DVD root menu. Execute navigation menu command 4. For DVD, this jumps to the Subpicture menu. Execute navigation menu command 5. For DVD, the jumps to the audio menu. Execute navigation menu command 6. For DVD, this jumps to the angles menu. Execute navigation menu command 7. For DVD, this jumps to the chapter menu. Select the next button to the left in a menu, if such a button exists. Select the next button to the right in a menu, if such a button exists. Select the button above the current one in a menu, if such a button exists. Select the button below the current one in a menu, if such a button exists. Activate (click) the currently selected button in a menu, if such a button exists. Switch to the previous angle in a multiangle feature. Switch to the next angle in a multiangle feature. Enum values for the various events that an element implementing the GstNavigation interface might send up the pipeline. Touch events have been inspired by the libinput API, and have the same meaning here. Returned from gst_navigation_event_get_type() when the passed event is not a navigation event. A key press event. Use gst_navigation_event_parse_key_event() to extract the details from the event. A key release event. Use gst_navigation_event_parse_key_event() to extract the details from the event. A mouse button press event. Use gst_navigation_event_parse_mouse_button_event() to extract the details from the event. A mouse button release event. Use gst_navigation_event_parse_mouse_button_event() to extract the details from the event. A mouse movement event. Use gst_navigation_event_parse_mouse_move_event() to extract the details from the event. A navigation command event. Use gst_navigation_event_parse_command() to extract the details from the event. A mouse scroll event. Use gst_navigation_event_parse_mouse_scroll_event() to extract the details from the event. An event describing a new touch point, which will be assigned an identifier that is unique to it for the duration of its movement on the screen. Use gst_navigation_event_parse_touch_event() to extract the details from the event. An event describing the movement of an active touch point across the screen. Use gst_navigation_event_parse_touch_event() to extract the details from the event. An event describing a removed touch point. After this event, its identifier may be reused for any new touch points. Use gst_navigation_event_parse_touch_up_event() to extract the details from the event. An event signaling the end of a sequence of simultaneous touch events. An event cancelling all currently active touch points. A mouse button double click event. Use gst_navigation_event_parse_mouse_button_event() to extract the details from the event. Navigation interface. the parent interface The navigation interface instance The event to send A set of notifications that may be received on the bus when navigation related status changes. Returned from gst_navigation_message_get_type() when the passed message is not a navigation message. Sent when the mouse moves over or leaves a clickable region of the output, such as a DVD menu button. Sent when the set of available commands changes and should re-queried by interested applications. Sent when display angles in a multi-angle feature (such as a multiangle DVD) change - either angles have appeared or disappeared. Sent when a navigation event was not handled by any element in the pipeline (Since: 1.6) Flags to indicate the state of modifier keys and mouse buttons in events. Typical modifier keys are Shift, Control, Meta, Super, Hyper, Alt, Compose, Apple, CapsLock or ShiftLock. the Shift key. the Control key. the third modifier key the fourth modifier key the fifth modifier key the sixth modifier key the seventh modifier key the first mouse button (usually the left button). the second mouse button (usually the right button). the third mouse button (usually the mouse wheel button or middle button). the fourth mouse button (typically the "Back" button). the fifth mouse button (typically the "forward" button). the Super modifier the Hyper modifier the Meta modifier A mask covering all entries in #GdkModifierType. the Meta modifier Types of navigation interface queries. invalid query command query viewing angle query Returns the #GstVideoAncillaryDID16 of the ancillary data. a #GstVideoAncillary Check if GST_VIDEO_BUFFER_FLAG_BOTTOM_FIELD is set on @buf (Since: 1.18). a #GstBuffer Check if GST_VIDEO_BUFFER_FLAG_TOP_FIELD is set on @buf (Since: 1.18). a #GstBuffer Generic caps string for video, for use in pad templates. string format that describes the pixel layout, as string (e.g. "I420", "RGB", "YV12", "YUY2", "AYUV", etc.) Generic caps string for video, for use in pad templates. Requires caps features as a string, e.g. "memory:SystemMemory". string format that describes the pixel layout, as string (e.g. "I420", "RGB", "YV12", "YUY2", "AYUV", etc.) The entire set of flags for the @frame a #GstVideoCodecFrame Checks whether the given @flag is set a #GstVideoCodecFrame a flag to check for This macro sets the given bits a #GstVideoCodecFrame Flag to set, can be any number of bits in guint32. This macro usets the given bits. a #GstVideoCodecFrame Flag to unset Tests if the buffer should only be decoded but not sent downstream. a #GstVideoCodecFrame Tests if the frame must be encoded as a keyframe. Applies only to frames provided to encoders. Decoders can safely ignore this field. a #GstVideoCodecFrame Tests if encoder should output stream headers before outputting the resulting encoded buffer for the given frame. Applies only to frames provided to encoders. Decoders can safely ignore this field. a #GstVideoCodecFrame Tests if the frame is a synchronization point (like a keyframe). Decoder implementations can use this to detect keyframes. a #GstVideoCodecFrame Sets the buffer to not be sent downstream. Decoder implementation can use this if they have frames that are not meant to be displayed. Encoder implementation can safely ignore this field. a #GstVideoCodecFrame Sets the frame to be a synchronization point (like a keyframe). Encoder implementations should set this accordingly. Decoder implementing parsing features should set this when they detect such a synchronization point. a #GstVideoCodecFrame #GstVideoAlphaMode, the alpha mode to use. Default is #GST_VIDEO_ALPHA_MODE_COPY. #G_TYPE_DOUBLE, the alpha color value to use. Default to 1.0 #G_TYPE_BOOLEAN, whether gst_video_converter_frame() will return immediately without waiting for the conversion to complete. A subsequent gst_video_converter_frame_finish() must be performed to ensure completion of the conversion before subsequent use. Default %FALSE #G_TYPE_UINT, the border color to use if #GST_VIDEO_CONVERTER_OPT_FILL_BORDER is set to %TRUE. The color is in ARGB format. Default 0xff000000 #GstVideoChromaMode, set the chroma resample mode subsampled formats. Default is #GST_VIDEO_CHROMA_MODE_FULL. #GstVideoChromaMethod, The resampler method to use for chroma resampling. Other options for the resampler can be used, see the #GstVideoResampler. Default is #GST_VIDEO_RESAMPLER_METHOD_LINEAR #G_TYPE_INT, height in the destination frame, default destination height #G_TYPE_INT, width in the destination frame, default destination width #G_TYPE_INT, x position in the destination frame, default 0 #G_TYPE_INT, y position in the destination frame, default 0 #GstVideoDitherMethod, The dither method to use when changing bit depth. Default is #GST_VIDEO_DITHER_BAYER. #G_TYPE_UINT, The quantization amount to dither to. Components will be quantized to multiples of this value. Default is 1 #G_TYPE_BOOLEAN, if the destination rectangle does not fill the complete destination image, render a border with #GST_VIDEO_CONVERTER_OPT_BORDER_ARGB. Otherwise the unusded pixels in the destination are untouched. Default %TRUE. #GstVideoGammaMode, set the gamma mode. Default is #GST_VIDEO_GAMMA_MODE_NONE. #GstVideoMatrixMode, set the color matrix conversion mode for converting between Y'PbPr and non-linear RGB (R'G'B'). Default is #GST_VIDEO_MATRIX_MODE_FULL. #GstVideoPrimariesMode, set the primaries conversion mode. Default is #GST_VIDEO_PRIMARIES_MODE_NONE. #GstVideoResamplerMethod, The resampler method to use for resampling. Other options for the resampler can be used, see the #GstVideoResampler. Default is #GST_VIDEO_RESAMPLER_METHOD_CUBIC #G_TYPE_UINT, The number of taps for the resampler. Default is 0: let the resampler choose a good value. #G_TYPE_INT, source height to convert, default source height #G_TYPE_INT, source width to convert, default source width #G_TYPE_INT, source x position to start conversion, default 0 #G_TYPE_INT, source y position to start conversion, default 0 #G_TYPE_UINT, maximum number of threads to use. Default 1, 0 for the number of cores. Utility function that video decoder elements can use in case they encountered a data processing error that may be fatal for the current "data unit" but need not prevent subsequent decoding. Such errors are counted and if there are too many, as configured in the context's max_errors, the pipeline will post an error message and the application will be requested to stop further media processing. Otherwise, it is considered a "glitch" and only a warning is logged. In either case, @ret is set to the proper value to return to upstream/caller (indicating either GST_FLOW_ERROR or GST_FLOW_OK). the base video decoder element that generates the error element defined weight of the error, added to error count like CORE, LIBRARY, RESOURCE or STREAM (see #gstreamer-GstGError) error code defined for that domain (see #gstreamer-GstGError) the message to display (format string and args enclosed in parentheses) debugging information for the message (format string and args enclosed in parentheses) variable to receive return value Gives the segment of the element. base decoder instance Default maximum number of errors tolerated before signaling error. Gives the segment of the element. base decoder instance The name of the templates for the sink pad. Gives the pointer to the sink #GstPad object of the element. a #GstVideoDecoder The name of the templates for the source pad. Gives the pointer to the source #GstPad object of the element. a #GstVideoDecoder Obtain a lock to protect the decoder function from concurrent access. video decoder instance Release the lock that protects the decoder function from concurrent access. video decoder instance Generic caps string for video wit DMABuf(GST_CAPS_FEATURE_MEMORY_DMABUF) feature, for use in pad templates. As drm-format is supposed to be defined at run-time it's not predefined here. Gives the segment of the element. base parse instance Gives the segment of the element. base parse instance The name of the templates for the sink pad. Gives the pointer to the sink #GstPad object of the element. a #GstVideoEncoder The name of the templates for the source pad. Gives the pointer to the source #GstPad object of the element. a #GstVideoEncoder Obtain a lock to protect the encoder function from concurrent access. video encoder instance Release the lock that protects the encoder function from concurrent access. video encoder instance List of all video formats, for use in template caps strings. Formats are sorted by decreasing "quality", using these criteria by priority: - number of components - depth - subsampling factor of the width - subsampling factor of the height - number of planes - native endianness preferred - pixel stride - poffset - prefer non-complex formats - prefer YUV formats over RGB ones - prefer I420 over YV12 - format name Declare all video formats as a string. Formats are sorted by decreasing "quality", using these criteria by priority: - number of components - depth - subsampling factor of the width - subsampling factor of the height - number of planes - native endianness preferred - pixel stride - poffset - prefer non-complex formats - prefer YUV formats over RGB ones - prefer I420 over YV12 - format name This is similar to %GST_VIDEO_FORMATS_ALL but includes formats like DMA_DRM that do not have a software converter. This should be used for passthrough template caps. This is similar to %GST_VIDEO_FORMATS_ALL_STR but includes formats like DMA_DRM for which no software converter exists. This should be used for passthrough template caps. This macro checks if %GST_VIDEO_FORMAT_FLAG_SUBTILES is set. When this flag is set, it means that the tile sizes must be scaled as per the subsampling. a #GstVideoFormatInfo Tests that the given #GstVideoFormatInfo represents a valid un-encoded format. Number of planes. This is the number of planes the pixel layout is organized in in memory. The number of planes can be less than the number of components (e.g. Y,U,V,A or R, G, B, A) when multiple components are packed into one plane. Examples: RGB/RGBx/RGBA: 1 plane, 3/3/4 components; I420: 3 planes, 3 components; NV21/NV12: 2 planes, 3 components. a #GstVideoFormatInfo Plane number where the given component can be found. A plane may contain data for multiple components. a #GstVideoFormatInfo the component index pixel stride for the given component. This is the amount of bytes to the pixel immediately to the right, so basically bytes from one pixel to the next. When bits < 8, the stride is expressed in bits. Examples: for 24-bit RGB, the pixel stride would be 3 bytes, while it would be 4 bytes for RGBx or ARGB, and 8 bytes for ARGB64 or AYUV64. For planar formats such as I420 the pixel stride is usually 1. For YUY2 it would be 2 bytes. a #GstVideoFormatInfo the component index Row stride in bytes, that is number of bytes from the first pixel component of a row to the first pixel component in the next row. This might include some row padding (memory not actually used for anything, to make sure the beginning of the next row is aligned in a particular way). a #GstVideoFormatInfo an array of strides the component index See #GstVideoTileInfo.height. Returns the tile height. a #GstVideoFormatInfo the plane index Provides the size in bytes of a tile in the specified @plane. This replaces the width and height shift, which was limited to power of two dimensions. a #GstVideoFormatInfo the plane index See #GstVideoTileInfo.stride. Returns the stride of one tile, regardless of the internal details of the tile (could be a complex system with subtile) the tiles size should alway match the tile width multiplied by the tile stride. a #GstVideoFormatInfo the plane index See #GstVideoTileInfo.width. Return the width of one tile in pixels, zero if its not an integer. a #GstVideoFormatInfo the plane index Number of video formats in #GstVideoFormat. The height of a field. It's the height of the full frame unless split-field (alternate) interlacing is in use. The padded height in pixels of a plane (padded size divided by the plane stride). In case of GST_VIDEO_INTERLACE_MODE_ALTERNATE info, this macro returns the plane heights used to hold a single field, not the full frame. The size passed as third argument is the size of the pixel data and should not contain any extra metadata padding. It is not valid to use this macro with a TILED format. G_TYPE_DOUBLE, B parameter of the cubic filter. The B parameter controls the bluriness. Values between 0.0 and 2.0 are accepted. 1/3 is the default. Below are some values of popular filters: B C Hermite 0.0 0.0 Spline 1.0 0.0 Catmull-Rom 0.0 1/2 Mitchell 1/3 1/3 Robidoux 0.3782 0.3109 Robidoux Sharp 0.2620 0.3690 Robidoux Soft 0.6796 0.1602 G_TYPE_DOUBLE, C parameter of the cubic filter. The C parameter controls the Keys alpha value. Values between 0.0 and 2.0 are accepted. 1/3 is the default. See #GST_VIDEO_RESAMPLER_OPT_CUBIC_B for some more common values G_TYPE_DOUBLE, specifies the size of filter envelope for @GST_VIDEO_RESAMPLER_METHOD_LANCZOS. values are clamped between 1.0 and 5.0. 2.0 is the default. G_TYPE_INT, limits the maximum number of taps to use. 16 is the default. G_TYPE_DOUBLE, specifies sharpening of the filter for @GST_VIDEO_RESAMPLER_METHOD_LANCZOS. values are clamped between 0.0 and 1.0. 0.0 is the default. G_TYPE_DOUBLE, specifies sharpness of the filter for @GST_VIDEO_RESAMPLER_METHOD_LANCZOS. values are clamped between 0.5 and 1.5. 1.0 is the default. #GstVideoDitherMethod, The dither method to use for propagating quatization errors. Cast @obj to a #GstVideoSink without runtime type check. a #GstVideoSink or derived object Get the sink #GstPad of @obj. a #GstVideoSink use this macro to create new tile modes. the mode number to create the tile mode type Encode the number of tile in X and Y into the stride. number of tiles in X number of tiles in Y Check if @mode is an indexed tile type a tile mode Get the tile mode type of @mode the tile mode Extract the number of tiles in X from the stride value. plane stride Extract the number of tiles in Y from the stride value. plane stride Active Format Description (AFD) For details, see Table 6.14 Active Format in: ATSC Digital Television Standard: Part 4 – MPEG-2 Video System Characteristics https://www.atsc.org/wp-content/uploads/2015/03/a_53-Part-4-2009.pdf and Active Format Description in Complete list of AFD codes https://en.wikipedia.org/wiki/Active_Format_Description#Complete_list_of_AFD_codes and SMPTE ST2016-1 parent #GstMeta 0 for progressive or field 1 and 1 for field 2 #GstVideoAFDSpec that applies to @afd #GstVideoAFDValue AFD value Enumeration of the different standards that may apply to AFD data: 0) ETSI/DVB: https://www.etsi.org/deliver/etsi_ts/101100_101199/101154/02.01.01_60/ts_101154v020101p.pdf 1) ATSC A/53: https://www.atsc.org/wp-content/uploads/2015/03/a_53-Part-4-2009.pdf 2) SMPTE ST2016-1: AFD value is from DVB/ETSI standard AFD value is from ATSC A/53 standard Enumeration of the various values for Active Format Description (AFD) AFD should be included in video user data whenever the rectangular picture area containing useful information does not extend to the full height or width of the coded frame. AFD data may also be included in user data when the rectangular picture area containing useful information extends to the full height and width of the coded frame. For details, see Table 6.14 Active Format in: ATSC Digital Television Standard: Part 4 – MPEG-2 Video System Characteristics https://www.atsc.org/wp-content/uploads/2015/03/a_53-Part-4-2009.pdf and Active Format Description in Complete list of AFD codes https://en.wikipedia.org/wiki/Active_Format_Description#Complete_list_of_AFD_codes and SMPTE ST2016-1 Notes: 1) AFD 0 is undefined for ATSC and SMPTE ST2016-1, indicating that AFD data is not available: If Bar Data is not present, AFD '0000' indicates that exact information is not available and the active image should be assumed to be the same as the coded frame. AFD '0000'. AFD '0000' accompanied by Bar Data signals that the active image’s aspect ratio is narrower than 16:9, but is not 4:3 or 14:9. As the exact aspect ratio cannot be conveyed by AFD alone, wherever possible, AFD ‘0000’ should be accompanied by Bar Data to define the exact vertical or horizontal extent of the active image. 2) AFD 0 is reserved for DVB/ETSI 3) values 1, 5, 6, 7, and 12 are reserved for both ATSC and DVB/ETSI 4) values 2 and 3 are not recommended for ATSC, but are valid for DVB/ETSI Unavailable (see note 0 below). For 4:3 coded frame, letterbox 16:9 image, at top of the coded frame. For 16:9 coded frame, full frame 16:9 image, the same as the coded frame. For 4:3 coded frame, letterbox 14:9 image, at top of the coded frame. For 16:9 coded frame, pillarbox 14:9 image, horizontally centered in the coded frame. For 4:3 coded frame, letterbox image with an aspect ratio greater than 16:9, vertically centered in the coded frame. For 16:9 coded frame, letterbox image with an aspect ratio greater than 16:9. For 4:3 coded frame, full frame 4:3 image, the same as the coded frame. For 16:9 coded frame, full frame 16:9 image, the same as the coded frame. For 4:3 coded frame, full frame 4:3 image, the same as the coded frame. For 16:9 coded frame, pillarbox 4:3 image, horizontally centered in the coded frame. For 4:3 coded frame, letterbox 16:9 image, vertically centered in the coded frame with all image areas protected. For 16:9 coded frame, full frame 16:9 image, with all image areas protected. For 4:3 coded frame, letterbox 14:9 image, vertically centered in the coded frame. For 16:9 coded frame, pillarbox 14:9 image, horizontally centered in the coded frame. For 4:3 coded frame, full frame 4:3 image, with alternative 14:9 center. For 16:9 coded frame, pillarbox 4:3 image, with alternative 14:9 center. For 4:3 coded frame, letterbox 16:9 image, with alternative 14:9 center. For 16:9 coded frame, full frame 16:9 image, with alternative 14:9 center. For 4:3 coded frame, letterbox 16:9 image, with alternative 4:3 center. For 16:9 coded frame, full frame 16:9 image, with alternative 4:3 center. Extra buffer metadata for performing an affine transformation using a 4x4 matrix. The transformation matrix can be composed with gst_video_affine_transformation_meta_apply_matrix(). The vertices operated on are all in the range 0 to 1, not in Normalized Device Coordinates (-1 to +1). Transforming points in this space are assumed to have an origin at (0.5, 0.5, 0.5) in a left-handed coordinate system with the x-axis moving horizontally (positive values to the right), the y-axis moving vertically (positive values up the screen) and the z-axis perpendicular to the screen (positive values into the screen). parent #GstMeta the column-major 4x4 transformation matrix Apply a transformation using the given 4x4 transformation matrix. Performs the multiplication, meta->matrix X matrix. a #GstVideoAffineTransformationMeta a 4x4 transformation matrix to be applied VideoAggregator can accept AYUV, ARGB and BGRA video streams. For each of the requested sink pads it will compare the incoming geometry and framerate to define the output parameters. Indeed output video frames will have the geometry of the biggest incoming video stream and the framerate of the fastest incoming one. VideoAggregator will do colorspace conversion. Zorder for each input stream can be configured on the #GstVideoAggregatorPad. The returned #GstTaskPool is used internally for performing parallel video format conversions/scaling/etc during the #GstVideoAggregatorPadClass::prepare_frame_start() process. Subclasses can add their own operation to perform using the returned #GstTaskPool during #GstVideoAggregatorClass::aggregate_frames(). the #GstTaskPool that can be used by subclasses for performing concurrent operations the #GstVideoAggregator Causes the element to aggregate on a timeout even when no live source is connected to its sinks. See #GstAggregator:min-upstream-latency for a companion property: in the vast majority of cases where you plan to plug in live sources with a non-zero latency, you should set it to a non-zero value. The #GstVideoInfo representing the currently set srcpad caps. An implementation of GstPad that can be used with #GstVideoAggregator. See #GstVideoAggregator for more details. Requests the pad to check and update the converter before the next usage to update for any changes that have happened. a #GstVideoAggregatorPad Finish preparing @prepared_frame. If overriden, `prepare_frame_start` must also be overriden. the #GstVideoAggregatorPad the parent #GstVideoAggregator the #GstVideoFrame to prepare into Begin preparing the frame from the pad buffer and sets it to prepared_frame. If overriden, `prepare_frame_finish` must also be overriden. the #GstVideoAggregatorPad the parent #GstVideoAggregator the input #GstBuffer to prepare the #GstVideoFrame to prepare into Returns the currently queued buffer that is going to be used for the current output frame. This must only be called from the #GstVideoAggregatorClass::aggregate_frames virtual method, or from the #GstVideoAggregatorPadClass::prepare_frame virtual method of the aggregator pads. The return value is only valid until #GstVideoAggregatorClass::aggregate_frames or #GstVideoAggregatorPadClass::prepare_frame returns. The currently queued buffer a #GstVideoAggregatorPad Returns the currently prepared video frame that has to be aggregated into the current output frame. This must only be called from the #GstVideoAggregatorClass::aggregate_frames virtual method, or from the #GstVideoAggregatorPadClass::prepare_frame virtual method of the aggregator pads. The return value is only valid until #GstVideoAggregatorClass::aggregate_frames or #GstVideoAggregatorPadClass::prepare_frame returns. The currently prepared video frame a #GstVideoAggregatorPad Checks if the pad currently has a buffer queued that is going to be used for the current output frame. This must only be called from the #GstVideoAggregatorClass::aggregate_frames virtual method, or from the #GstVideoAggregatorPadClass::prepare_frame virtual method of the aggregator pads. %TRUE if the pad has currently a buffer queued a #GstVideoAggregatorPad Allows selecting that this pad requires an output format with alpha a #GstVideoAggregatorPad %TRUE if this pad requires alpha output The #GstVideoInfo currently set on the pad the #GstVideoAggregatorPad the parent #GstVideoAggregator the input #GstBuffer to prepare the #GstVideoFrame to prepare into the #GstVideoAggregatorPad the parent #GstVideoAggregator the #GstVideoFrame to prepare into An implementation of GstPad that can be used with #GstVideoAggregator. See #GstVideoAggregator for more details. Extra alignment parameters for the memory of video buffers. This structure is usually used to configure the bufferpool if it supports the #GST_BUFFER_POOL_OPTION_VIDEO_ALIGNMENT. extra pixels on the top extra pixels on the bottom extra pixels on the left side extra pixels on the right side array with extra alignment requirements for the strides Set @align to its default values with no padding and no alignment. a #GstVideoAlignment Different alpha modes. When input and output have alpha, it will be copied. When the input has no alpha, alpha will be set to #GST_VIDEO_CONVERTER_OPT_ALPHA_VALUE set all alpha to #GST_VIDEO_CONVERTER_OPT_ALPHA_VALUE multiply all alpha with #GST_VIDEO_CONVERTER_OPT_ALPHA_VALUE. When the input format has no alpha but the output format has, the alpha value will be set to #GST_VIDEO_CONVERTER_OPT_ALPHA_VALUE Video Ancillary data, according to SMPTE-291M specification. Note that the contents of the data are always stored as 8bit data (i.e. do not contain the parity check bits). The Data Identifier The Secondary Data Identifier (if type 2) or the Data Block Number (if type 1) The amount of data (in bytes) in @data (max 255 bytes) The user data content of the Ancillary packet. Does not contain the ADF, DID, SDID nor CS. Some know types of Ancillary Data identifiers. CEA 708 Ancillary data according to SMPTE 334 CEA 608 Ancillary data according to SMPTE 334 AFD/Bar Ancillary data according to SMPTE 2016-3 (Since: 1.18) Bar data should be included in video user data whenever the rectangular picture area containing useful information does not extend to the full height or width of the coded frame and AFD alone is insufficient to describe the extent of the image. Note: either vertical or horizontal bars are specified, but not both. For more details, see: https://www.atsc.org/wp-content/uploads/2015/03/a_53-Part-4-2009.pdf and SMPTE ST2016-1 parent #GstMeta 0 for progressive or field 1 and 1 for field 2 if true then bar data specifies letterbox, otherwise pillarbox If @is_letterbox is true, then the value specifies the last line of a horizontal letterbox bar area at top of reconstructed frame. Otherwise, it specifies the last horizontal luminance sample of a vertical pillarbox bar area at the left side of the reconstructed frame If @is_letterbox is true, then the value specifies the first line of a horizontal letterbox bar area at bottom of reconstructed frame. Otherwise, it specifies the first horizontal luminance sample of a vertical pillarbox bar area at the right side of the reconstructed frame. Additional video buffer flags. These flags can potentially be used on any buffers carrying closed caption data, or video data - even encoded data. Note that these are only valid for #GstCaps of type: video/... and caption/... They can conflict with other extended buffer flags. If the #GstBuffer is interlaced. In mixed interlace-mode, this flags specifies if the frame is interlaced or progressive. If the #GstBuffer is interlaced, then the first field in the video frame is the top field. If unset, the bottom field is first. If the #GstBuffer is interlaced, then the first field (as defined by the %GST_VIDEO_BUFFER_FLAG_TFF flag setting) is repeated. If the #GstBuffer is interlaced, then only the first field (as defined by the %GST_VIDEO_BUFFER_FLAG_TFF flag setting) is to be displayed (Since: 1.16). The #GstBuffer contains one or more specific views, such as left or right eye view. This flags is set on any buffer that contains non-mono content - even for streams that contain only a single viewpoint. In mixed mono / non-mono streams, the absence of the flag marks mono buffers. When conveying stereo/multiview content with frame-by-frame methods, this flag marks the first buffer in a bundle of frames that belong together. The video frame has the top field only. This is the same as GST_VIDEO_BUFFER_FLAG_TFF | GST_VIDEO_BUFFER_FLAG_ONEFIELD (Since: 1.16). Use GST_VIDEO_BUFFER_IS_TOP_FIELD() to check for this flag. If the #GstBuffer is interlaced, then only the first field (as defined by the %GST_VIDEO_BUFFER_FLAG_TFF flag setting) is to be displayed (Since: 1.16). The video frame has the bottom field only. This is the same as GST_VIDEO_BUFFER_FLAG_ONEFIELD (GST_VIDEO_BUFFER_FLAG_TFF flag unset) (Since: 1.16). Use GST_VIDEO_BUFFER_IS_BOTTOM_FIELD() to check for this flag. The #GstBuffer contains the end of a video field or frame boundary such as the last subframe or packet (Since: 1.18). Offset to define more flags Create a new bufferpool that can allocate video frames. This bufferpool supports all the video bufferpool options. a new #GstBufferPool to allocate video frames Extra buffer metadata providing Closed Caption. parent #GstMeta The type of Closed Caption contained in the meta. The Closed Caption data. The size in bytes of @data The various known types of Closed Caption (CC). Unknown type of CC CEA-608 as byte pairs. Note that this format is not recommended since is does not specify to which field the caption comes from and therefore assumes it comes from the first field (and that there is no information on the second field). Use @GST_VIDEO_CAPTION_TYPE_CEA708_RAW if you wish to store CEA-608 from two fields and prefix each byte pair with 0xFC for the first field and 0xFD for the second field. CEA-608 as byte triplets as defined in SMPTE S334-1 Annex A. The second and third byte of the byte triplet is the raw CEA608 data, the first byte is a bitfield: The top/7th bit is 0 for the second field, 1 for the first field, bit 6 and 5 are 0 and bits 4 to 0 are a 5 bit unsigned integer that represents the line offset relative to the base-line of the original image format (line 9 for 525-line field 1, line 272 for 525-line field 2, line 5 for 625-line field 1 and line 318 for 625-line field 2). CEA-708 as cc_data byte triplets. They can also contain 608-in-708 and the first byte of each triplet has to be inspected for detecting the type. CEA-708 (and optionally CEA-608) in a CDP (Caption Distribution Packet) defined by SMPTE S-334-2. Contains the whole CDP (starting with 0x9669). Parses fixed Closed Caption #GstCaps and returns the corresponding caption type, or %GST_VIDEO_CAPTION_TYPE_UNKNOWN. #GstVideoCaptionType. Fixed #GstCaps to parse Creates new caps corresponding to @type. new #GstCaps #GstVideoCaptionType Extra flags that influence the result from gst_video_chroma_resample_new(). no flags the input is interlaced Different subsampling and upsampling methods Duplicates the chroma samples when upsampling and drops when subsampling Uses linear interpolation to reconstruct missing chroma and averaging to subsample Different chroma downsampling and upsampling modes do full chroma up and down sampling only perform chroma upsampling only perform chroma downsampling disable chroma resampling Perform resampling of @width chroma pixels in @lines. a #GstVideoChromaResample pixel lines the number of pixels on one line Free @resample a #GstVideoChromaResample The resampler must be fed @n_lines at a time. The first line should be at @offset. a #GstVideoChromaResample the number of input lines the first line Create a new resampler object for the given parameters. When @h_factor or @v_factor is > 0, upsampling will be used, otherwise subsampling is performed. a new #GstVideoChromaResample that should be freed with gst_video_chroma_resample_free() after usage. a #GstVideoChromaMethod a #GstVideoChromaSite #GstVideoChromaFlags the #GstVideoFormat horizontal resampling factor vertical resampling factor Various Chroma sitings. unknown cositing no cositing chroma is horizontally cosited chroma is vertically cosited choma samples are sited on alternate lines chroma samples cosited with luma samples jpeg style cositing, also for mpeg1 and mjpeg mpeg2 style cositing DV style cositing Convert @s to a #GstVideoChromaSite a #GstVideoChromaSite or %GST_VIDEO_CHROMA_SITE_UNKNOWN when @s does not contain a valid chroma-site description. a chromasite string Converts @site to its string representation. a string representation of @site or %NULL if @site contains undefined value or is equal to %GST_VIDEO_CHROMA_SITE_UNKNOWN a #GstVideoChromaSite This meta is primarily for internal use in GStreamer elements to support VP8/VP9 transparent video stored into WebM or Matroska containers, or transparent static AV1 images. Nothing prevents you from using this meta for custom purposes, but it generally can't be used to easily to add support for alpha channels to CODECs or formats that don't support that out of the box. parent #GstMeta the encoded alpha frame #GstMetaInfo pointer that describes #GstVideoCodecAlphaMeta. A #GstVideoCodecFrame represents a video frame both in raw and encoded form. Unique identifier for the frame. Use this if you need to get hold of the frame later (like when data is being decoded). Typical usage in decoders is to set this on the opaque value provided to the library and get back the frame using gst_video_decoder_get_frame() Decoding timestamp Presentation timestamp Duration of the frame Distance in frames from the last synchronization point. the input #GstBuffer that created this frame. The buffer is owned by the frame and references to the frame instead of the buffer should be kept. the output #GstBuffer. Implementations should set this either directly, or by using the gst_video_decoder_allocate_output_frame() or gst_video_decoder_allocate_output_buffer() methods. The buffer is owned by the frame and references to the frame instead of the buffer should be kept. Running time when the frame will be used. Gets private data set on the frame by the subclass via gst_video_codec_frame_set_user_data() previously. The previously set user_data a #GstVideoCodecFrame Increases the refcount of the given frame by one. @buf a #GstVideoCodecFrame Sets @user_data on the frame and the #GDestroyNotify that will be called when the frame is freed. Allows to attach private data by the subclass to frames. If a @user_data was previously set, then the previous set @notify will be called before the @user_data is replaced. a #GstVideoCodecFrame private data a #GDestroyNotify Decreases the refcount of the frame. If the refcount reaches 0, the frame will be freed. a #GstVideoCodecFrame Flags for #GstVideoCodecFrame is the frame only meant to be decoded is the frame a synchronization point (keyframe) should the output frame be made a keyframe should the encoder output stream headers The buffer data is corrupted. Structure representing the state of an incoming or outgoing video stream for encoders and decoders. Decoders and encoders will receive such a state through their respective @set_format vmethods. Decoders and encoders can set the downstream state, by using the gst_video_decoder_set_output_state() or gst_video_encoder_set_output_state() methods. The #GstVideoInfo describing the stream The #GstCaps used in the caps negotiation of the pad. a #GstBuffer corresponding to the 'codec_data' field of a stream, or NULL. The #GstCaps for allocation query and pool negotiation. Since: 1.10 Mastering display color volume information (HDR metadata) for the stream. Content light level information for the stream. Increases the refcount of the given state by one. @buf a #GstVideoCodecState Decreases the refcount of the state. If the refcount reaches 0, the state will be freed. a #GstVideoCodecState The color matrix is used to convert between Y'PbPr and non-linear RGB (R'G'B') unknown matrix identity matrix. Order of coefficients is actually GBR, also IEC 61966-2-1 (sRGB) FCC Title 47 Code of Federal Regulations 73.682 (a)(20) ITU-R BT.709 color matrix, also ITU-R BT1361 / IEC 61966-2-4 xvYCC709 / SMPTE RP177 Annex B ITU-R BT.601 color matrix, also SMPTE170M / ITU-R BT1358 525 / ITU-R BT1700 NTSC SMPTE 240M color matrix ITU-R BT.2020 color matrix. Since: 1.6 Converts the @value to the #GstVideoColorMatrix The matrix coefficients (MatrixCoefficients) value is defined by "ISO/IEC 23001-8 Section 7.3 Table 4" and "ITU-T H.273 Table 4". "H.264 Table E-5" and "H.265 Table E.5" share the identical values. the matched #GstVideoColorMatrix a ITU-T H.273 matrix coefficients value Get the coefficients used to convert between Y'PbPr and R'G'B' using @matrix. When: |[ 0.0 <= [Y',R',G',B'] <= 1.0) (-0.5 <= [Pb,Pr] <= 0.5) ]| the general conversion is given by: |[ Y' = Kr*R' + (1-Kr-Kb)*G' + Kb*B' Pb = (B'-Y')/(2*(1-Kb)) Pr = (R'-Y')/(2*(1-Kr)) ]| and the other way around: |[ R' = Y' + Cr*2*(1-Kr) G' = Y' - Cb*2*(1-Kb)*Kb/(1-Kr-Kb) - Cr*2*(1-Kr)*Kr/(1-Kr-Kb) B' = Y' + Cb*2*(1-Kb) ]| TRUE if @matrix was a YUV color format and @Kr and @Kb contain valid values. a #GstVideoColorMatrix result red channel coefficient result blue channel coefficient Converts #GstVideoColorMatrix to the "matrix coefficients" (MatrixCoefficients) value defined by "ISO/IEC 23001-8 Section 7.3 Table 4" and "ITU-T H.273 Table 4". "H.264 Table E-5" and "H.265 Table E.5" share the identical values. The value of ISO/IEC 23001-8 matrix coefficients. a #GstVideoColorMatrix The color primaries define the how to transform linear RGB values to and from the CIE XYZ colorspace. unknown color primaries BT709 primaries, also ITU-R BT1361 / IEC 61966-2-4 / SMPTE RP177 Annex B BT470M primaries, also FCC Title 47 Code of Federal Regulations 73.682 (a)(20) BT470BG primaries, also ITU-R BT601-6 625 / ITU-R BT1358 625 / ITU-R BT1700 625 PAL & SECAM SMPTE170M primaries, also ITU-R BT601-6 525 / ITU-R BT1358 525 / ITU-R BT1700 NTSC SMPTE240M primaries Generic film (colour filters using Illuminant C) ITU-R BT2020 primaries. Since: 1.6 Adobe RGB primaries. Since: 1.8 SMPTE ST 428 primaries (CIE 1931 XYZ). Since: 1.16 SMPTE RP 431 primaries (ST 431-2 (2011) / DCI P3). Since: 1.16 SMPTE EG 432 primaries (ST 432-1 (2010) / P3 D65). Since: 1.16 EBU 3213 primaries (JEDEC P22 phosphors). Since: 1.16 Converts the @value to the #GstVideoColorPrimaries The colour primaries (ColourPrimaries) value is defined by "ISO/IEC 23001-8 Section 7.1 Table 2" and "ITU-T H.273 Table 2". "H.264 Table E-3" and "H.265 Table E.3" share the identical values. the matched #GstVideoColorPrimaries a ITU-T H.273 colour primaries value Get information about the chromaticity coordinates of @primaries. a #GstVideoColorPrimariesInfo for @primaries. a #GstVideoColorPrimaries Checks whether @primaries and @other are functionally equivalent TRUE if @primaries and @other can be considered equivalent. a #GstVideoColorPrimaries another #GstVideoColorPrimaries Converts #GstVideoColorPrimaries to the "colour primaries" (ColourPrimaries) value defined by "ISO/IEC 23001-8 Section 7.1 Table 2" and "ITU-T H.273 Table 2". "H.264 Table E-3" and "H.265 Table E.3" share the identical values. The value of ISO/IEC 23001-8 colour primaries. a #GstVideoColorPrimaries Structure describing the chromaticity coordinates of an RGB system. These values can be used to construct a matrix to transform RGB to and from the XYZ colorspace. a #GstVideoColorPrimaries reference white x coordinate reference white y coordinate red x coordinate red y coordinate green x coordinate green y coordinate blue x coordinate blue y coordinate Possible color range values. These constants are defined for 8 bit color values and can be scaled for other bit depths. unknown range [0..255] for 8 bit components [16..235] for 8 bit components. Chroma has [16..240] range. Compute the offset and scale values for each component of @info. For each component, (c[i] - offset[i]) / scale[i] will scale the component c[i] to the range [0.0 .. 1.0]. The reverse operation (c[i] * scale[i]) + offset[i] can be used to convert the component values in range [0.0 .. 1.0] back to their representation in @info and @range. a #GstVideoColorRange a #GstVideoFormatInfo output offsets output scale Structure describing the color info. the color range. This is the valid range for the samples. It is used to convert the samples to Y'PbPr values. the color matrix. Used to convert between Y'PbPr and non-linear RGB (R'G'B') the transfer function. used to convert between R'G'B' and RGB color primaries. used to convert between R'G'B' and CIE XYZ Parse the colorimetry string and update @cinfo with the parsed values. %TRUE if @color points to valid colorimetry info. a #GstVideoColorimetry a colorimetry string Compare the 2 colorimetry sets for equality %TRUE if @cinfo and @other are equal. a #GstVideoColorimetry another #GstVideoColorimetry Compare the 2 colorimetry sets for functionally equality %TRUE if @cinfo and @other are equivalent. a #GstVideoColorimetry bitdepth of a format associated with @cinfo another #GstVideoColorimetry bitdepth of a format associated with @other Check if the colorimetry information in @info matches that of the string @color. %TRUE if @color conveys the same colorimetry info as the color information in @info. a #GstVideoInfo a colorimetry string Make a string representation of @cinfo. a string representation of @cinfo or %NULL if all the entries of @cinfo are unknown values. a #GstVideoColorimetry Content light level information specified in CEA-861.3, Appendix A. the maximum content light level (abbreviated to MaxCLL) in candelas per square meter (cd/m^2 and nit) the maximum frame average light level (abbreviated to MaxFLL) in candelas per square meter (cd/m^2 and nit) Parse @caps and update @linfo %TRUE if @linfo was successfully set to @caps a #GstVideoContentLightLevel a #GstCaps Parse @caps and update @linfo if @caps has #GstVideoContentLightLevel and could be parsed a #GstVideoContentLightLevel a #GstCaps Parse the value of content-light-level caps field and update @minfo with the parsed values. %TRUE if @linfo points to valid #GstVideoContentLightLevel. a #GstVideoContentLightLevel a content-light-level string from caps Initialize @linfo a #GstVideoContentLightLevel Checks equality between @linfo and @other. %TRUE if @linfo and @other are equal. a #GstVideoContentLightLevel a #GstVideoContentLightLevel Convert @linfo to its string representation. a string representation of @linfo. a #GstVideoContentLightLevel Convert the pixels of @src into @dest using @convert. If #GST_VIDEO_CONVERTER_OPT_ASYNC_TASKS is %TRUE then this function will return immediately and needs to be followed by a call to gst_video_converter_frame_finish(). a #GstVideoConverter a #GstVideoFrame a #GstVideoFrame Wait for a previous async conversion performed using gst_video_converter_frame() to complete. a #GstVideoConverter Free @convert a #GstVideoConverter Get the current configuration of @convert. a #GstStructure that remains valid for as long as @convert is valid or until gst_video_converter_set_config() is called. a #GstVideoConverter Retrieve the input format of @convert. a #GstVideoInfo a #GstVideoConverter Retrieve the output format of @convert. a #GstVideoInfo a #GstVideoConverter Set @config as extra configuration for @convert. If the parameters in @config can not be set exactly, this function returns %FALSE and will try to update as much state as possible. The new state can then be retrieved and refined with gst_video_converter_get_config(). Look at the `GST_VIDEO_CONVERTER_OPT_*` fields to check valid configuration option and values. %TRUE when @config could be set. a #GstVideoConverter a #GstStructure Create a new converter object to convert between @in_info and @out_info with @config. Returns (nullable): a #GstVideoConverter or %NULL if conversion is not possible. a #GstVideoInfo a #GstVideoInfo a #GstStructure with configuration options Create a new converter object to convert between @in_info and @out_info with @config. The optional @pool can be used to spawn threads, this is useful when creating new converters rapidly, for example when updating cropping. Returns (nullable): a #GstVideoConverter or %NULL if conversion is not possible. a #GstVideoInfo a #GstVideoInfo a #GstStructure with configuration options a #GstTaskPool to spawn threads from Extra buffer metadata describing image cropping. parent #GstMeta the horizontal offset the vertical offset the cropped width the cropped height This base class is for video decoders turning encoded data into raw video frames. The GstVideoDecoder base class and derived subclasses should cooperate as follows: ## Configuration * Initially, GstVideoDecoder calls @start when the decoder element is activated, which allows the subclass to perform any global setup. * GstVideoDecoder calls @set_format to inform the subclass of caps describing input video data that it is about to receive, including possibly configuration data. While unlikely, it might be called more than once, if changing input parameters require reconfiguration. * Incoming data buffers are processed as needed, described in Data Processing below. * GstVideoDecoder calls @stop at end of all processing. ## Data processing * The base class gathers input data, and optionally allows subclass to parse this into subsequently manageable chunks, typically corresponding to and referred to as 'frames'. * Each input frame is provided in turn to the subclass' @handle_frame callback. * When the subclass enables the subframe mode with `gst_video_decoder_set_subframe_mode`, the base class will provide to the subclass the same input frame with different input buffers to the subclass @handle_frame callback. During this call, the subclass needs to take ownership of the input_buffer as @GstVideoCodecFrame.input_buffer will have been changed before the next subframe buffer is received. The subclass will call `gst_video_decoder_have_last_subframe` when a new input frame can be created by the base class. Every subframe will share the same @GstVideoCodecFrame.output_buffer to write the decoding result. The subclass is responsible to protect its access. * If codec processing results in decoded data, the subclass should call @gst_video_decoder_finish_frame to have decoded data pushed downstream. In subframe mode the subclass should call @gst_video_decoder_finish_subframe until the last subframe where it should call @gst_video_decoder_finish_frame. The subclass can detect the last subframe using GST_VIDEO_BUFFER_FLAG_MARKER on buffers or using its own logic to collect the subframes. In case of decoding failure, the subclass must call @gst_video_decoder_drop_frame or @gst_video_decoder_drop_subframe, to allow the base class to do timestamp and offset tracking, and possibly to requeue the frame for a later attempt in the case of reverse playback. ## Shutdown phase * The GstVideoDecoder class calls @stop to inform the subclass that data parsing will be stopped. ## Additional Notes * Seeking/Flushing * When the pipeline is seeked or otherwise flushed, the subclass is informed via a call to its @reset callback, with the hard parameter set to true. This indicates the subclass should drop any internal data queues and timestamps and prepare for a fresh set of buffers to arrive for parsing and decoding. * End Of Stream * At end-of-stream, the subclass @parse function may be called some final times with the at_eos parameter set to true, indicating that the element should not expect any more data to be arriving, and it should parse and remaining frames and call gst_video_decoder_have_frame() if possible. The subclass is responsible for providing pad template caps for source and sink pads. The pads need to be named "sink" and "src". It also needs to provide information about the output caps, when they are known. This may be when the base class calls the subclass' @set_format function, though it might be during decoding, before calling @gst_video_decoder_finish_frame. This is done via @gst_video_decoder_set_output_state The subclass is also responsible for providing (presentation) timestamps (likely based on corresponding input ones). If that is not applicable or possible, the base class provides limited framerate based interpolation. Similarly, the base class provides some limited (legacy) seeking support if specifically requested by the subclass, as full-fledged support should rather be left to upstream demuxer, parser or alike. This simple approach caters for seeking and duration reporting using estimated input bitrates. To enable it, a subclass should call @gst_video_decoder_set_estimate_rate to enable handling of incoming byte-streams. The base class provides some support for reverse playback, in particular in case incoming data is not packetized or upstream does not provide fragments on keyframe boundaries. However, the subclass should then be prepared for the parsing and frame processing stage to occur separately (in normal forward processing, the latter immediately follows the former), The subclass also needs to ensure the parsing stage properly marks keyframes, unless it knows the upstream elements will do so properly for incoming data. The bare minimum that a functional subclass needs to implement is: * Provide pad templates * Inform the base class of output caps via @gst_video_decoder_set_output_state * Parse input data, if it is not considered packetized from upstream Data will be provided to @parse which should invoke @gst_video_decoder_add_to_frame and @gst_video_decoder_have_frame to separate the data belonging to each video frame. * Accept data in @handle_frame and provide decoded results to @gst_video_decoder_finish_frame, or call @gst_video_decoder_drop_frame. The #GstVideoDecoder The frame to handle %TRUE if the decoder should be drained afterwards. The #GstVideoDecoder Timestamp of the missing data Duration of the missing data Negotiate with downstream elements to currently configured #GstVideoCodecState. Unmark GST_PAD_FLAG_NEED_RECONFIGURE in any case. But mark it again if negotiate fails. %TRUE if the negotiation succeeded, else %FALSE. a #GstVideoDecoder Removes next @n_bytes of input data and adds it to currently parsed frame. a #GstVideoDecoder the number of bytes to add Helper function that allocates a buffer to hold a video frame for @decoder's current #GstVideoCodecState. You should use gst_video_decoder_allocate_output_frame() instead of this function, if possible at all. allocated buffer, or NULL if no buffer could be allocated (e.g. when downstream is flushing or shutting down) a #GstVideoDecoder Helper function that allocates a buffer to hold a video frame for @decoder's current #GstVideoCodecState. Subclass should already have configured video state and set src pad caps. The buffer allocated here is owned by the frame and you should only keep references to the frame, not the buffer. %GST_FLOW_OK if an output buffer could be allocated a #GstVideoDecoder a #GstVideoCodecFrame Same as #gst_video_decoder_allocate_output_frame except it allows passing #GstBufferPoolAcquireParams to the sub call gst_buffer_pool_acquire_buffer. %GST_FLOW_OK if an output buffer could be allocated a #GstVideoDecoder a #GstVideoCodecFrame a #GstBufferPoolAcquireParams Similar to gst_video_decoder_finish_frame(), but drops @frame in any case and posts a QoS message with the frame's details on the bus. In any case, the frame is considered finished and released. a #GstFlowReturn, usually GST_FLOW_OK. a #GstVideoDecoder the #GstVideoCodecFrame to drop Drops input data. The frame is not considered finished until the whole frame is finished or dropped by the subclass. a #GstFlowReturn, usually GST_FLOW_OK. a #GstVideoDecoder the #GstVideoCodecFrame @frame should have a valid decoded data buffer, whose metadata fields are then appropriately set according to frame data and pushed downstream. If no output data is provided, @frame is considered skipped. In any case, the frame is considered finished and released. After calling this function the output buffer of the frame is to be considered read-only. This function will also change the metadata of the buffer. a #GstFlowReturn resulting from sending data downstream a #GstVideoDecoder a decoded #GstVideoCodecFrame Indicate that a subframe has been finished to be decoded by the subclass. This method should be called for all subframes except the last subframe where @gst_video_decoder_finish_frame should be called instead. a #GstFlowReturn, usually GST_FLOW_OK. a #GstVideoDecoder the #GstVideoCodecFrame Lets #GstVideoDecoder sub-classes to know the memory @allocator used by the base class and its @params. Unref the @allocator after use it. a #GstVideoDecoder the #GstAllocator used the #GstAllocationParams of @allocator the instance of the #GstBufferPool used by the decoder; free it after use it a #GstVideoDecoder currently configured byte to time conversion setting a #GstVideoDecoder Get a pending unfinished #GstVideoCodecFrame pending unfinished #GstVideoCodecFrame identified by @frame_number. a #GstVideoDecoder system_frame_number of a frame Get all pending unfinished #GstVideoCodecFrame pending unfinished #GstVideoCodecFrame. a #GstVideoDecoder Queries the number of the last subframe received by the decoder baseclass in the @frame. the current subframe index received in subframe mode, 1 otherwise. a #GstVideoDecoder the #GstVideoCodecFrame to update Query the configured decoder latency. Results will be returned via @min_latency and @max_latency. a #GstVideoDecoder address of variable in which to store the configured minimum latency, or %NULL address of variable in which to store the configured mximum latency, or %NULL Determines maximum possible decoding time for @frame that will allow it to decode and arrive in time (as determined by QoS events). In particular, a negative result means decoding in time is no longer possible and should therefore occur as soon/skippy as possible. max decoding time. a #GstVideoDecoder a #GstVideoCodecFrame currently configured decoder tolerated error count. a #GstVideoDecoder Queries decoder required format handling. %TRUE if required format handling is enabled. a #GstVideoDecoder Queries if the decoder requires a sync point before it starts outputting data in the beginning. %TRUE if a sync point is required in the beginning. a #GstVideoDecoder Get the oldest pending unfinished #GstVideoCodecFrame oldest pending unfinished #GstVideoCodecFrame. a #GstVideoDecoder Get the #GstVideoCodecState currently describing the output stream. #GstVideoCodecState describing format of video data. a #GstVideoDecoder Queries whether input data is considered packetized or not by the base class. TRUE if input data is considered packetized. a #GstVideoDecoder Returns the number of bytes previously added to the current frame by calling gst_video_decoder_add_to_frame(). The number of bytes pending for the current frame a #GstVideoDecoder Queries the number of subframes in the frame processed by the decoder baseclass. the current subframe processed received in subframe mode. a #GstVideoDecoder the #GstVideoCodecFrame to update The current QoS proportion. a #GstVideoDecoder current QoS proportion, or %NULL Queries whether input data is considered as subframes or not by the base class. If FALSE, each input buffer will be considered as a full frame. TRUE if input data is considered as sub frames. a #GstVideoDecoder Gathers all data collected for currently parsed frame, gathers corresponding metadata and passes it along for further processing, i.e. @handle_frame. a #GstFlowReturn a #GstVideoDecoder Indicates that the last subframe has been processed by the decoder in @frame. This will release the current frame in video decoder allowing to receive new frames from upstream elements. This method must be called in the subclass @handle_frame callback. a #GstFlowReturn, usually GST_FLOW_OK. a #GstVideoDecoder the #GstVideoCodecFrame to update Sets the audio decoder tags and how they should be merged with any upstream stream tags. This will override any tags previously-set with gst_audio_decoder_merge_tags(). Note that this is provided for convenience, and the subclass is not required to use this and can still do tag handling on its own. MT safe. a #GstVideoDecoder a #GstTagList to merge, or NULL to unset previously-set tags the #GstTagMergeMode to use, usually #GST_TAG_MERGE_REPLACE Negotiate with downstream elements to currently configured #GstVideoCodecState. Unmark GST_PAD_FLAG_NEED_RECONFIGURE in any case. But mark it again if negotiate fails. %TRUE if the negotiation succeeded, else %FALSE. a #GstVideoDecoder Returns caps that express @caps (or sink template caps if @caps == NULL) restricted to resolution/format/... combinations supported by downstream elements. a #GstCaps owned by caller a #GstVideoDecoder initial caps filter caps Similar to gst_video_decoder_drop_frame(), but simply releases @frame without any processing other than removing it from list of pending frames, after which it is considered finished and released. a #GstVideoDecoder the #GstVideoCodecFrame to release Allows the #GstVideoDecoder subclass to request from the base class that a new sync should be requested from upstream, and that @frame was the frame when the subclass noticed that a new sync point is required. A reason for the subclass to do this could be missing reference frames, for example. The base class will then request a new sync point from upstream as long as the time that passed since the last one is exceeding #GstVideoDecoder:min-force-key-unit-interval. The subclass can signal via @flags how the frames until the next sync point should be handled: * If %GST_VIDEO_DECODER_REQUEST_SYNC_POINT_DISCARD_INPUT is selected then all following input frames until the next sync point are discarded. This can be useful if the lack of a sync point will prevent all further decoding and the decoder implementation is not very robust in handling missing references frames. * If %GST_VIDEO_DECODER_REQUEST_SYNC_POINT_CORRUPT_OUTPUT is selected then all output frames following @frame are marked as corrupted via %GST_BUFFER_FLAG_CORRUPTED. Corrupted frames can be automatically dropped by the base class, see #GstVideoDecoder:discard-corrupted-frames. Subclasses can manually mark frames as corrupted via %GST_VIDEO_CODEC_FRAME_FLAG_CORRUPTED before calling gst_video_decoder_finish_frame(). a #GstVideoDecoder a #GstVideoCodecFrame #GstVideoDecoderRequestSyncPointFlags Allows baseclass to perform byte to time estimated conversion. a #GstVideoDecoder whether to enable byte to time conversion Same as #gst_video_decoder_set_output_state() but also allows you to also set the interlacing mode. the newly configured output state. a #GstVideoDecoder a #GstVideoFormat A #GstVideoInterlaceMode The width in pixels The height in pixels An optional reference #GstVideoCodecState Lets #GstVideoDecoder sub-classes tell the baseclass what the decoder latency is. If the provided values changed from previously provided ones, this will also post a LATENCY message on the bus so the pipeline can reconfigure its global latency. a #GstVideoDecoder minimum latency maximum latency Sets numbers of tolerated decoder errors, where a tolerated one is then only warned about, but more than tolerated will lead to fatal error. You can set -1 for never returning fatal errors. Default is set to GST_VIDEO_DECODER_MAX_ERRORS. The '-1' option was added in 1.4 a #GstVideoDecoder max tolerated errors Configures decoder format needs. If enabled, subclass needs to be negotiated with format caps before it can process any data. It will then never be handed any data before it has been configured. Otherwise, it might be handed data without having been configured and is then expected being able to do so either by default or based on the input data. a #GstVideoDecoder new state Configures whether the decoder requires a sync point before it starts outputting data in the beginning. If enabled, the base class will discard all non-sync point frames in the beginning and after a flush and does not pass it to the subclass. If the first frame is not a sync point, the base class will request a sync point via the force-key-unit event. a #GstVideoDecoder new state Creates a new #GstVideoCodecState with the specified @fmt, @width and @height as the output state for the decoder. Any previously set output state on @decoder will be replaced by the newly created one. If the subclass wishes to copy over existing fields (like pixel aspec ratio, or framerate) from an existing #GstVideoCodecState, it can be provided as a @reference. If the subclass wishes to override some fields from the output state (like pixel-aspect-ratio or framerate) it can do so on the returned #GstVideoCodecState. The new output state will only take effect (set on pads and buffers) starting from the next call to #gst_video_decoder_finish_frame(). the newly configured output state. a #GstVideoDecoder a #GstVideoFormat The width in pixels The height in pixels An optional reference #GstVideoCodecState Allows baseclass to consider input data as packetized or not. If the input is packetized, then the @parse method will not be called. a #GstVideoDecoder whether the input data should be considered as packetized. If this is set to TRUE, it informs the base class that the subclass can receive the data at a granularity lower than one frame. Note that in this mode, the subclass has two options. It can either require the presence of a GST_VIDEO_BUFFER_FLAG_MARKER to mark the end of a frame. Or it can operate in such a way that it will decode a single frame at a time. In this second case, every buffer that arrives to the element is considered part of the same frame until gst_video_decoder_finish_frame() is called. In either case, the same #GstVideoCodecFrame will be passed to the GstVideoDecoderClass:handle_frame vmethod repeatedly with a different GstVideoCodecFrame:input_buffer every time until the end of the frame has been signaled using either method. This method must be called during the decoder subclass @set_format call. a #GstVideoDecoder whether the input data should be considered as subframes. Lets #GstVideoDecoder sub-classes decide if they want the sink pad to use the default pad query handler to reply to accept-caps queries. By setting this to true it is possible to further customize the default handler with %GST_PAD_SET_ACCEPT_INTERSECT and %GST_PAD_SET_ACCEPT_TEMPLATE a #GstVideoDecoder if the default pad accept-caps query handling should be used GstVideoDecoderRequestSyncPointFlags to use for the automatically requested sync points if `automatic-request-sync-points` is enabled. If set to %TRUE the decoder will automatically request sync points when it seems like a good idea, e.g. if the first frames are not key frames or if packet loss was reported by upstream. If set to %TRUE the decoder will discard frames that are marked as corrupted instead of outputting them. Maximum number of tolerated consecutive decode errors. See gst_video_decoder_set_max_errors() for more details. Minimum interval between force-key-unit events sent upstream by the decoder. Setting this to 0 will cause every event to be handled, setting this to %GST_CLOCK_TIME_NONE will cause every event to be ignored. See gst_video_event_new_upstream_force_key_unit() for more details about force-key-unit events. If set to %TRUE the decoder will handle QoS events received from downstream elements. This includes dropping output frames which are detected as late using the metrics reported by those events. Subclasses can override any of the available virtual methods or not, as needed. At minimum @handle_frame needs to be overridden, and @set_format and likely as well. If non-packetized input is supported or expected, @parse needs to be overridden as well. The #GstVideoDecoder The frame to handle %TRUE if the negotiation succeeded, else %FALSE. a #GstVideoDecoder %TRUE if the decoder should be drained afterwards. The #GstVideoDecoder Timestamp of the missing data Duration of the missing data Flags to be used in combination with gst_video_decoder_request_sync_point(). See the function documentation for more details. discard all following input until the next sync point. discard all following output until the next sync point. The interface allows unified access to control flipping and rotation operations of video-sources or operators. #GstVideoDirectionInterface interface. parent interface type. GstVideoDither provides implementations of several dithering algorithms that can be applied to lines of video pixels to quantize and dither them. Free @dither a #GstVideoDither Dither @width pixels starting from offset @x in @line using @dither. @y is the line number of @line in the output image. a #GstVideoDither pointer to the pixels of the line x coordinate y coordinate the width Make a new dither object for dithering lines of @format using the algorithm described by @method. Each component will be quantized to a multiple of @quantizer. Better performance is achieved when @quantizer is a power of 2. @width is the width of the lines that this ditherer will handle. a new #GstVideoDither a #GstVideoDitherMethod a #GstVideoDitherFlags a #GstVideoFormat quantizer the width of the lines Extra flags that influence the result from gst_video_chroma_resample_new(). no flags the input is interlaced quantize values in addition to adding dither. Different dithering methods to use. no dithering propagate rounding errors downwards Dither with floyd-steinberg error diffusion Dither with Sierra Lite error diffusion ordered dither using a bayer pattern This base class is for video encoders turning raw video into encoded video data. GstVideoEncoder and subclass should cooperate as follows. ## Configuration * Initially, GstVideoEncoder calls @start when the encoder element is activated, which allows subclass to perform any global setup. * GstVideoEncoder calls @set_format to inform subclass of the format of input video data that it is about to receive. Subclass should setup for encoding and configure base class as appropriate (e.g. latency). While unlikely, it might be called more than once, if changing input parameters require reconfiguration. Baseclass will ensure that processing of current configuration is finished. * GstVideoEncoder calls @stop at end of all processing. ## Data processing * Base class collects input data and metadata into a frame and hands this to subclass' @handle_frame. * If codec processing results in encoded data, subclass should call @gst_video_encoder_finish_frame to have encoded data pushed downstream. * If implemented, baseclass calls subclass @pre_push just prior to pushing to allow subclasses to modify some metadata on the buffer. If it returns GST_FLOW_OK, the buffer is pushed downstream. * GstVideoEncoderClass will handle both srcpad and sinkpad events. Sink events will be passed to subclass if @event callback has been provided. ## Shutdown phase * GstVideoEncoder class calls @stop to inform the subclass that data parsing will be stopped. Subclass is responsible for providing pad template caps for source and sink pads. The pads need to be named "sink" and "src". It should also be able to provide fixed src pad caps in @getcaps by the time it calls @gst_video_encoder_finish_frame. Things that subclass need to take care of: * Provide pad templates * Provide source pad caps before pushing the first buffer * Accept data in @handle_frame and provide encoded results to @gst_video_encoder_finish_frame. The #GstVideoEncoder:qos property will enable the Quality-of-Service features of the encoder which gather statistics about the real-time performance of the downstream elements. If enabled, subclasses can use gst_video_encoder_get_max_encode_time() to check if input frames are already late and drop them right away to give a chance to the pipeline to catch up. Negotiate with downstream elements to currently configured #GstVideoCodecState. Unmark GST_PAD_FLAG_NEED_RECONFIGURE in any case. But mark it again if negotiate fails. %TRUE if the negotiation succeeded, else %FALSE. a #GstVideoEncoder Helper function that allocates a buffer to hold an encoded video frame for @encoder's current #GstVideoCodecState. allocated buffer a #GstVideoEncoder size of the buffer Helper function that allocates a buffer to hold an encoded video frame for @encoder's current #GstVideoCodecState. Subclass should already have configured video state and set src pad caps. The buffer allocated here is owned by the frame and you should only keep references to the frame, not the buffer. %GST_FLOW_OK if an output buffer could be allocated a #GstVideoEncoder a #GstVideoCodecFrame size of the buffer Removes @frame from the list of pending frames, releases it and posts a QoS message with the frame's details on the bus. Similar to calling gst_video_encoder_finish_frame() without a buffer attached to @frame, but this function additionally stores events from @frame as pending, to be pushed out alongside the next frame submitted via gst_video_encoder_finish_frame(). a #GstVideoEncoder a #GstVideoCodecFrame @frame must have a valid encoded data buffer, whose metadata fields are then appropriately set according to frame data or no buffer at all if the frame should be dropped. It is subsequently pushed downstream or provided to @pre_push. In any case, the frame is considered finished and released. If @frame does not have a buffer attached, it will be dropped, and a QoS message will be posted on the bus. Events from @frame will be pushed out immediately. After calling this function the output buffer of the frame is to be considered read-only. This function will also change the metadata of the buffer. a #GstFlowReturn resulting from sending data downstream a #GstVideoEncoder an encoded #GstVideoCodecFrame If multiple subframes are produced for one input frame then use this method for each subframe, except for the last one. Before calling this function, you need to fill frame->output_buffer with the encoded buffer to push. You must call #gst_video_encoder_finish_frame() for the last sub-frame to tell the encoder that the frame has been fully encoded. This function will change the metadata of @frame and frame->output_buffer will be pushed downstream. a #GstFlowReturn resulting from pushing the buffer downstream. a #GstVideoEncoder a #GstVideoCodecFrame being encoded Lets #GstVideoEncoder sub-classes to know the memory @allocator used by the base class and its @params. Unref the @allocator after use it. a #GstVideoEncoder the #GstAllocator used the #GstAllocationParams of @allocator Get a pending unfinished #GstVideoCodecFrame pending unfinished #GstVideoCodecFrame identified by @frame_number. a #GstVideoEncoder system_frame_number of a frame Get all pending unfinished #GstVideoCodecFrame pending unfinished #GstVideoCodecFrame. a #GstVideoEncoder Query the configured encoding latency. Results will be returned via @min_latency and @max_latency. a #GstVideoEncoder address of variable in which to store the configured minimum latency, or %NULL address of variable in which to store the configured maximum latency, or %NULL Determines maximum possible encoding time for @frame that will allow it to encode and arrive in time (as determined by QoS events). In particular, a negative result means encoding in time is no longer possible and should therefore occur as soon/skippy as possible. If no QoS events have been received from downstream, or if #GstVideoEncoder:qos is disabled this function returns #G_MAXINT64. max decoding time. a #GstVideoEncoder a #GstVideoCodecFrame Returns the minimum force-keyunit interval, see gst_video_encoder_set_min_force_key_unit_interval() for more details. the minimum force-keyunit interval the encoder Get the oldest unfinished pending #GstVideoCodecFrame oldest unfinished pending #GstVideoCodecFrame a #GstVideoEncoder Get the current #GstVideoCodecState #GstVideoCodecState describing format of video data. a #GstVideoEncoder Checks if @encoder is currently configured to handle Quality-of-Service events from downstream. %TRUE if the encoder is configured to perform Quality-of-Service. the encoder Sets the video encoder tags and how they should be merged with any upstream stream tags. This will override any tags previously-set with gst_video_encoder_merge_tags(). Note that this is provided for convenience, and the subclass is not required to use this and can still do tag handling on its own. MT safe. a #GstVideoEncoder a #GstTagList to merge, or NULL to unset previously-set tags the #GstTagMergeMode to use, usually #GST_TAG_MERGE_REPLACE Negotiate with downstream elements to currently configured #GstVideoCodecState. Unmark GST_PAD_FLAG_NEED_RECONFIGURE in any case. But mark it again if negotiate fails. %TRUE if the negotiation succeeded, else %FALSE. a #GstVideoEncoder Returns caps that express @caps (or sink template caps if @caps == NULL) restricted to resolution/format/... combinations supported by downstream elements (e.g. muxers). a #GstCaps owned by caller a #GstVideoEncoder initial caps filter caps Removes @frame from list of pending frames and releases it, similar to calling gst_video_encoder_finish_frame() without a buffer attached to the frame, but does not post a QoS message or do any additional processing. Events from @frame are moved to the pending events list. a #GstVideoEncoder a #GstVideoCodecFrame Set the codec headers to be sent downstream whenever requested. a #GstVideoEncoder a list of #GstBuffer containing the codec header Informs baseclass of encoding latency. If the provided values changed from previously provided ones, this will also post a LATENCY message on the bus so the pipeline can reconfigure its global latency. a #GstVideoEncoder minimum latency maximum latency Sets the minimum interval for requesting keyframes based on force-keyunit events. Setting this to 0 will allow to handle every event, setting this to %GST_CLOCK_TIME_NONE causes force-keyunit events to be ignored. the encoder minimum interval Request minimal value for PTS passed to handle_frame. For streams with reordered frames this can be used to ensure that there is enough time to accommodate first DTS, which may be less than first PTS a #GstVideoEncoder minimal PTS that will be passed to handle_frame Creates a new #GstVideoCodecState with the specified caps as the output state for the encoder. Any previously set output state on @encoder will be replaced by the newly created one. The specified @caps should not contain any resolution, pixel-aspect-ratio, framerate, codec-data, .... Those should be specified instead in the returned #GstVideoCodecState. If the subclass wishes to copy over existing fields (like pixel aspect ratio, or framerate) from an existing #GstVideoCodecState, it can be provided as a @reference. If the subclass wishes to override some fields from the output state (like pixel-aspect-ratio or framerate) it can do so on the returned #GstVideoCodecState. The new output state will only take effect (set on pads and buffers) starting from the next call to #gst_video_encoder_finish_frame(). the newly configured output state. a #GstVideoEncoder the #GstCaps to use for the output An optional reference @GstVideoCodecState Configures @encoder to handle Quality-of-Service events from downstream. the encoder the new qos value. Minimum interval between force-keyunit requests in nanoseconds. See gst_video_encoder_set_min_force_key_unit_interval() for more details. Subclasses can override any of the available virtual methods or not, as needed. At minimum @handle_frame needs to be overridden, and @set_format and @get_caps are likely needed as well. %TRUE if the negotiation succeeded, else %FALSE. a #GstVideoEncoder Field order of interlaced content. This is only valid for interlace-mode=interleaved and not interlace-mode=mixed. In the case of mixed or GST_VIDEO_FIELD_ORDER_UNKOWN, the field order is signalled via buffer flags. unknown field order for interlaced content. The actual field order is signalled via buffer flags. top field is first bottom field is first Convert @order to a #GstVideoFieldOrder the #GstVideoFieldOrder of @order or #GST_VIDEO_FIELD_ORDER_UNKNOWN when @order is not a valid string representation for a #GstVideoFieldOrder. a field order Convert @order to its string representation. @order as a string. a #GstVideoFieldOrder Provides useful functions and a base class for video filters. The videofilter will by default enable QoS on the parent GstBaseTransform to implement frame dropping. The video filter class structure. the parent class structure Extra video flags no flags a variable fps is selected, fps_n and fps_d denote the maximum fps of the video Each color has been scaled by the alpha value. Enum value describing the most common video formats. See the [GStreamer raw video format design document](https://gstreamer.freedesktop.org/documentation/additional/design/mediatype-video-raw.html#formats) for details about the layout and packing of these formats in memory. Unknown or unset video format id Encoded video format. Only ever use that in caps for special video formats in combination with non-system memory GstCapsFeatures where it does not make sense to specify a real video format. planar 4:2:0 YUV planar 4:2:0 YVU (like I420 but UV planes swapped) packed 4:2:2 YUV (Y0-U0-Y1-V0 Y2-U2-Y3-V2 Y4 ...) packed 4:2:2 YUV (U0-Y0-V0-Y1 U2-Y2-V2-Y3 U4 ...) packed 4:4:4 YUV with alpha channel (A0-Y0-U0-V0 ...) sparse rgb packed into 32 bit, space last sparse reverse rgb packed into 32 bit, space last sparse rgb packed into 32 bit, space first sparse reverse rgb packed into 32 bit, space first rgb with alpha channel last reverse rgb with alpha channel last rgb with alpha channel first reverse rgb with alpha channel first RGB packed into 24 bits without padding (`R-G-B-R-G-B`) reverse RGB packed into 24 bits without padding (`B-G-R-B-G-R`) planar 4:1:1 YUV planar 4:2:2 YUV packed 4:2:2 YUV (Y0-V0-Y1-U0 Y2-V2-Y3-U2 Y4 ...) planar 4:4:4 YUV packed 4:2:2 10-bit YUV, complex format packed 4:2:2 16-bit YUV, Y0-U0-Y1-V1 order planar 4:2:0 YUV with interleaved UV plane planar 4:2:0 YUV with interleaved VU plane 8-bit grayscale 16-bit grayscale, most significant byte first 16-bit grayscale, least significant byte first packed 4:4:4 YUV (Y-U-V ...) rgb 5-6-5 bits per component reverse rgb 5-6-5 bits per component rgb 5-5-5 bits per component reverse rgb 5-5-5 bits per component packed 10-bit 4:2:2 YUV (U0-Y0-V0-Y1 U2-Y2-V2-Y3 U4 ...) planar 4:4:2:0 AYUV 8-bit paletted RGB planar 4:1:0 YUV planar 4:1:0 YUV (like YUV9 but UV planes swapped) packed 4:1:1 YUV (Cb-Y0-Y1-Cr-Y2-Y3 ...) rgb with alpha channel first, 16 bits (native endianness) per channel packed 4:4:4 YUV with alpha channel, 16 bits (native endianness) per channel (A0-Y0-U0-V0 ...) packed 4:4:4 RGB, 10 bits per channel planar 4:2:0 YUV, 10 bits per channel planar 4:2:0 YUV, 10 bits per channel planar 4:2:2 YUV, 10 bits per channel planar 4:2:2 YUV, 10 bits per channel planar 4:4:4 YUV, 10 bits per channel (Since: 1.2) planar 4:4:4 YUV, 10 bits per channel (Since: 1.2) planar 4:4:4 RGB, 8 bits per channel (Since: 1.2) planar 4:4:4 RGB, 10 bits per channel (Since: 1.2) planar 4:4:4 RGB, 10 bits per channel (Since: 1.2) planar 4:2:2 YUV with interleaved UV plane (Since: 1.2) planar 4:4:4 YUV with interleaved UV plane (Since: 1.2) NV12 with 64x32 tiling in zigzag pattern (Since: 1.4) planar 4:4:2:0 YUV, 10 bits per channel (Since: 1.6) planar 4:4:2:0 YUV, 10 bits per channel (Since: 1.6) planar 4:4:2:2 YUV, 10 bits per channel (Since: 1.6) planar 4:4:2:2 YUV, 10 bits per channel (Since: 1.6) planar 4:4:4:4 YUV, 10 bits per channel (Since: 1.6) planar 4:4:4:4 YUV, 10 bits per channel (Since: 1.6) planar 4:2:2 YUV with interleaved VU plane (Since: 1.6) planar 4:2:0 YUV with interleaved UV plane, 10 bits per channel (Since: 1.10) planar 4:2:0 YUV with interleaved UV plane, 10 bits per channel (Since: 1.10) packed 4:4:4 YUV (U-Y-V ...) (Since: 1.10) packed 4:2:2 YUV (V0-Y0-U0-Y1 V2-Y2-U2-Y3 V4 ...) planar 4:4:4:4 ARGB, 8 bits per channel (Since: 1.12) planar 4:4:4:4 ARGB, 10 bits per channel (Since: 1.12) planar 4:4:4:4 ARGB, 10 bits per channel (Since: 1.12) planar 4:4:4 RGB, 12 bits per channel (Since: 1.12) planar 4:4:4 RGB, 12 bits per channel (Since: 1.12) planar 4:4:4:4 ARGB, 12 bits per channel (Since: 1.12) planar 4:4:4:4 ARGB, 12 bits per channel (Since: 1.12) planar 4:2:0 YUV, 12 bits per channel (Since: 1.12) planar 4:2:0 YUV, 12 bits per channel (Since: 1.12) planar 4:2:2 YUV, 12 bits per channel (Since: 1.12) planar 4:2:2 YUV, 12 bits per channel (Since: 1.12) planar 4:4:4 YUV, 12 bits per channel (Since: 1.12) planar 4:4:4 YUV, 12 bits per channel (Since: 1.12) 10-bit grayscale, packed into 32bit words (2 bits padding) (Since: 1.14) 10-bit variant of @GST_VIDEO_FORMAT_NV12, packed into 32bit words (MSB 2 bits padding) (Since: 1.14) 10-bit variant of @GST_VIDEO_FORMAT_NV16, packed into 32bit words (MSB 2 bits padding) (Since: 1.14) Fully packed variant of NV12_10LE32 (Since: 1.16) packed 4:2:2 YUV, 10 bits per channel (Since: 1.16) packed 4:4:4 YUV, 10 bits per channel(A-V-Y-U...) (Since: 1.16) packed 4:4:4 YUV with alpha channel (V0-U0-Y0-A0...) (Since: 1.16) packed 4:4:4 RGB with alpha channel(B-G-R-A), 10 bits for R/G/B channel and MSB 2 bits for alpha channel (Since: 1.16) packed 4:4:4 RGB with alpha channel(R-G-B-A), 10 bits for R/G/B channel and MSB 2 bits for alpha channel (Since: 1.18) planar 4:4:4 YUV, 16 bits per channel (Since: 1.18) planar 4:4:4 YUV, 16 bits per channel (Since: 1.18) planar 4:2:0 YUV with interleaved UV plane, 16 bits per channel (Since: 1.18) planar 4:2:0 YUV with interleaved UV plane, 16 bits per channel (Since: 1.18) planar 4:2:0 YUV with interleaved UV plane, 12 bits per channel (Since: 1.18) planar 4:2:0 YUV with interleaved UV plane, 12 bits per channel (Since: 1.18) packed 4:2:2 YUV, 12 bits per channel (Y-U-Y-V) (Since: 1.18) packed 4:2:2 YUV, 12 bits per channel (Y-U-Y-V) (Since: 1.18) packed 4:4:4:4 YUV, 12 bits per channel(U-Y-V-A...) (Since: 1.18) packed 4:4:4:4 YUV, 12 bits per channel(U-Y-V-A...) (Since: 1.18) NV12 with 4x4 tiles in linear order. NV12 with 32x32 tiles in linear order. Planar 4:4:4 RGB, R-G-B order Planar 4:4:4 RGB, B-G-R order Planar 4:2:0 YUV with interleaved UV plane with alpha as 3rd plane. RGB with alpha channel first, 16 bits (little endian) per channel. RGB with alpha channel first, 16 bits (big endian) per channel. RGB with alpha channel last, 16 bits (little endian) per channel. RGB with alpha channel last, 16 bits (big endian) per channel. Reverse RGB with alpha channel last, 16 bits (little endian) per channel. Reverse RGB with alpha channel last, 16 bits (big endian) per channel. Reverse RGB with alpha channel first, 16 bits (little endian) per channel. Reverse RGB with alpha channel first, 16 bits (big endian) per channel. NV12 with 16x32 Y tiles and 16x16 UV tiles. NV12 with 8x128 tiles in linear order. NV12 10bit big endian with 8x128 tiles in linear order. @GST_VIDEO_FORMAT_NV12_10LE40 with 4x4 pixels tiles (5 bytes per tile row). This format is produced by Verisilicon/Hantro decoders. @GST_VIDEO_FORMAT_DMA_DRM represent the DMA DRM special format. It's only used with memory:DMABuf #GstCapsFeatures, where an extra parameter (drm-format) is required to define the image format and its memory layout. Mediatek 10bit NV12 little endian with 16x32 tiles in linear order, tile 2 bits. Mediatek 10bit NV12 little endian with 16x32 tiles in linear order, raster 2 bits. planar 4:4:2:2 YUV, 8 bits per channel planar 4:4:4:4 YUV, 8 bits per channel planar 4:4:4:4 YUV, 12 bits per channel planar 4:4:4:4 YUV, 12 bits per channel planar 4:4:2:2 YUV, 12 bits per channel planar 4:4:2:2 YUV, 12 bits per channel planar 4:4:2:0 YUV, 12 bits per channel planar 4:4:2:0 YUV, 12 bits per channel planar 4:4:4:4 YUV, 16 bits per channel planar 4:4:4:4 YUV, 16 bits per channel planar 4:4:2:2 YUV, 16 bits per channel planar 4:4:2:2 YUV, 16 bits per channel planar 4:4:2:0 YUV, 16 bits per channel planar 4:4:2:0 YUV, 16 bits per channel planar 4:4:4 RGB, 16 bits per channel planar 4:4:4 RGB, 16 bits per channel packed RGB with alpha, 8 bits per channel packed 4:2:2 YUV, 16 bits per channel (Y-U-Y-V) packed 4:2:2 YUV, 16 bits per channel (Y-U-Y-V) packed 4:4:4:4 YUV, 16 bits per channel(U-Y-V-A) packed 4:4:4:4 YUV, 16 bits per channel(U-Y-V-A) 10-bit grayscale, packed into 16bit words (6 bits left padding) Converts a FOURCC value into the corresponding #GstVideoFormat. If the FOURCC cannot be represented by #GstVideoFormat, #GST_VIDEO_FORMAT_UNKNOWN is returned. the #GstVideoFormat describing the FOURCC value a FOURCC value representing raw YUV video Find the #GstVideoFormat for the given parameters. a #GstVideoFormat or GST_VIDEO_FORMAT_UNKNOWN when the parameters to not specify a known format. the amount of bits used for a pixel the amount of bits used to store a pixel. This value is bigger than @depth the endianness of the masks, #G_LITTLE_ENDIAN or #G_BIG_ENDIAN the red mask the green mask the blue mask the alpha mask, or 0 if no alpha mask Convert the @format string to its #GstVideoFormat. the #GstVideoFormat for @format or GST_VIDEO_FORMAT_UNKNOWN when the string is not a known format. a format string Get the #GstVideoFormatInfo for @format The #GstVideoFormatInfo for @format. a #GstVideoFormat Get the default palette of @format. This the palette used in the pack function for paletted formats. the default palette of @format or %NULL when @format does not have a palette. a #GstVideoFormat size of the palette in bytes Converts a #GstVideoFormat value into the corresponding FOURCC. Only a few YUV formats have corresponding FOURCC values. If @format has no corresponding FOURCC value, 0 is returned. the FOURCC corresponding to @format a #GstVideoFormat video format Returns a string containing a descriptive name for the #GstVideoFormat. Since 1.26 this can also be used with %GST_VIDEO_FORMAT_UNKNOWN, previous versions were printing a critical warning and returned %NULL. the name corresponding to @format a #GstVideoFormat video format The different video flags that a format info can have. The video format is YUV, components are numbered 0=Y, 1=U, 2=V. The video format is RGB, components are numbered 0=R, 1=G, 2=B. The video is gray, there is one gray component with index 0. The video format has an alpha components with the number 3. The video format has data stored in little endianness. The video format has a palette. The palette is stored in the second plane and indexes are stored in the first plane. The video format has a complex layout that can't be described with the usual information in the #GstVideoFormatInfo. This format can be used in a #GstVideoFormatUnpack and #GstVideoFormatPack function. The format is tiled, there is tiling information in the last plane. The tile size varies per plane according to the subsampling. Information for a video format. #GstVideoFormat string representation of the format use readable description of the format #GstVideoFormatFlags The number of bits used to pack data items. This can be less than 8 when multiple pixels are stored in a byte. for values > 8 multiple bytes should be read according to the endianness flag before applying the shift and mask. the number of components in the video format. the number of bits to shift away to get the component data the depth in bits for each component the pixel stride of each component. This is the amount of bytes to the pixel immediately to the right. When bits < 8, the stride is expressed in bits. For 24-bit RGB, this would be 3 bytes, for example, while it would be 4 bytes for RGBx or ARGB. the number of planes for this format. The number of planes can be less than the amount of components when multiple components are packed into one plane. the plane number where a component can be found the offset in the plane where the first pixel of the components can be found. subsampling factor of the width for the component. Use GST_VIDEO_SUB_SCALE to scale a width. subsampling factor of the height for the component. Use GST_VIDEO_SUB_SCALE to scale a height. the format of the unpacked pixels. This format must have the #GST_VIDEO_FORMAT_FLAG_UNPACK flag set. an unpack function for this format the amount of lines that will be packed an pack function for this format The tiling mode The width of a tile, in bytes, represented as a shift. DEPRECATED, use tile_info[] array instead. The height of a tile, in bytes, represented as a shift. DEPREACTED, use tile_info[] array instead. Information about the tiles for each of the planes. Fill @components with the number of all the components packed in plane @p for the format @info. A value of -1 in @components indicates that no more components are packed in the plane. #GstVideoFormatInfo a plane number array used to store component numbers Extrapolate @plane stride from the first stride of an image. This helper is useful to support legacy API were only one stride is supported. The extrapolated stride for @plane #GstVideoFormatInfo a plane number The fist plane stride Packs @width pixels from @src to the given planes and strides in the format @info. The pixels from source have each component interleaved and will be packed into the planes in @data. This function operates on pack_lines lines, meaning that @src should contain at least pack_lines lines with a stride of @sstride and @y should be a multiple of pack_lines. Subsampled formats will use the horizontally and vertically cosited component from the source. Subsampling should be performed before packing. Because this function does not have a x coordinate, it is not possible to pack pixels starting from an unaligned position. For tiled images this means that packing should start from a tile coordinate. For subsampled formats this means that a complete pixel needs to be packed. a #GstVideoFormatInfo flags to control the packing a source array the source array stride pointers to the destination data planes strides of the destination planes the chroma siting of the target when subsampled (not used) the y position in the image to pack to the amount of pixels to pack. Unpacks @width pixels from the given planes and strides containing data of format @info. The pixels will be unpacked into @dest with each component interleaved as per @info's unpack_format, which will usually be one of #GST_VIDEO_FORMAT_ARGB, #GST_VIDEO_FORMAT_AYUV, #GST_VIDEO_FORMAT_ARGB64 or #GST_VIDEO_FORMAT_AYUV64 depending on the format to unpack. @dest should at least be big enough to hold @width * bytes_per_pixel bytes where bytes_per_pixel relates to the unpack format and will usually be either 4 or 8 depending on the unpack format. bytes_per_pixel will be the same as the pixel stride for plane 0 for the above formats. For subsampled formats, the components will be duplicated in the destination array. Reconstruction of the missing components can be performed in a separate step after unpacking. a #GstVideoFormatInfo flags to control the unpacking a destination array pointers to the data planes strides of the planes the x position in the image to start from the y position in the image to start from the amount of pixels to unpack. A video frame obtained from gst_video_frame_map() the #GstVideoInfo #GstVideoFrameFlags for the frame the mapped buffer pointer to metadata if any id of the mapped frame. the id can for example be used to identify the frame in case of multiview video. pointers to the plane data mappings of the planes Copy the contents from @src to @dest. Note: Since: 1.18, @dest dimensions are allowed to be smaller than @src dimensions. TRUE if the contents could be copied. a #GstVideoFrame a #GstVideoFrame Copy the plane with index @plane from @src to @dest. Note: Since: 1.18, @dest dimensions are allowed to be smaller than @src dimensions. TRUE if the contents could be copied. a #GstVideoFrame a #GstVideoFrame a plane Unmap the memory previously mapped with gst_video_frame_map. a #GstVideoFrame Use @info and @buffer to fill in the values of @frame. @frame is usually allocated on the stack, and you will pass the address to the #GstVideoFrame structure allocated on the stack; gst_video_frame_map() will then fill in the structures with the various video-specific information you need to access the pixels of the video buffer. You can then use accessor macros such as GST_VIDEO_FRAME_COMP_DATA(), GST_VIDEO_FRAME_PLANE_DATA(), GST_VIDEO_FRAME_COMP_STRIDE(), GST_VIDEO_FRAME_PLANE_STRIDE() etc. to get to the pixels. |[<!-- language="C" --> GstVideoFrame vframe; ... // set RGB pixels to black one at a time if (gst_video_frame_map (&vframe, video_info, video_buffer, GST_MAP_WRITE)) { guint8 *pixels = GST_VIDEO_FRAME_PLANE_DATA (vframe, 0); guint stride = GST_VIDEO_FRAME_PLANE_STRIDE (vframe, 0); guint pixel_stride = GST_VIDEO_FRAME_COMP_PSTRIDE (vframe, 0); for (h = 0; h < height; ++h) { for (w = 0; w < width; ++w) { guint8 *pixel = pixels + h * stride + w * pixel_stride; memset (pixel, 0, pixel_stride); } } gst_video_frame_unmap (&vframe); } ... ]| All video planes of @buffer will be mapped and the pointers will be set in @frame->data. The purpose of this function is to make it easy for you to get to the video pixels in a generic way, without you having to worry too much about details such as whether the video data is allocated in one contiguous memory chunk or multiple memory chunks (e.g. one for each plane); or if custom strides and custom plane offsets are used or not (as signalled by GstVideoMeta on each buffer). This function will just fill the #GstVideoFrame structure with the right values and if you use the accessor macros everything will just work and you can access the data easily. It also maps the underlying memory chunks for you. %TRUE on success. pointer to #GstVideoFrame a #GstVideoInfo the buffer to map #GstMapFlags Use @info and @buffer to fill in the values of @frame with the video frame information of frame @id. When @id is -1, the default frame is mapped. When @id != -1, this function will return %FALSE when there is no GstVideoMeta with that id. All video planes of @buffer will be mapped and the pointers will be set in @frame->data. %TRUE on success. pointer to #GstVideoFrame a #GstVideoInfo the buffer to map the frame id to map #GstMapFlags Extra video frame flags no flags The video frame is interlaced. In mixed interlace-mode, this flag specifies if the frame is interlaced or progressive. The video frame has the top field first The video frame has the repeat flag The video frame has one field The video contains one or more non-mono views The video frame is the first in a set of corresponding views provided as sequential frames. The video frame has the top field only. This is the same as GST_VIDEO_FRAME_FLAG_TFF | GST_VIDEO_FRAME_FLAG_ONEFIELD (Since: 1.16). The video frame has one field The video frame has the bottom field only. This is the same as GST_VIDEO_FRAME_FLAG_ONEFIELD (GST_VIDEO_FRAME_FLAG_TFF flag unset) (Since: 1.16). Additional mapping flags for gst_video_frame_map(). Don't take another reference of the buffer and store it in the GstVideoFrame. This makes sure that the buffer stays writable while the frame is mapped, but requires that the buffer reference stays valid until the frame is unmapped again. Offset to define more flags The orientation of the GL texture. Top line first in memory, left row first Bottom line first in memory, left row first Top line first in memory, right row first Bottom line first in memory, right row first The GL texture type. Luminance texture, GL_LUMINANCE Luminance-alpha texture, GL_LUMINANCE_ALPHA RGB 565 texture, GL_RGB RGB texture, GL_RGB RGBA texture, GL_RGBA R texture, GL_RED_EXT RG texture, GL_RG_EXT Extra buffer metadata for uploading a buffer to an OpenGL texture ID. The caller of gst_video_gl_texture_upload_meta_upload() must have OpenGL set up and call this from a thread where it is valid to upload something to an OpenGL texture. parent #GstMeta Orientation of the textures Number of textures that are generated Type of each texture Uploads the buffer which owns the meta to a specific texture ID. %TRUE if uploading succeeded, %FALSE otherwise. a #GstVideoGLTextureUploadMeta the texture IDs to upload to disable gamma handling convert between input and output gamma Different gamma conversion modes Information describing image properties. This information can be filled in from GstCaps with gst_video_info_from_caps(). The information is also used to store the specific video info when mapping a video frame with gst_video_frame_map(). Use the provided macros to access the info in this structure. the format info of the video the interlace mode additional video flags the width of the video the height of the video the default size of one frame the number of views for multiview video a #GstVideoChromaSite. the colorimetry info the pixel-aspect-ratio numerator the pixel-aspect-ratio denominator the framerate numerator the framerate denominator offsets of the planes strides of the planes Allocate a new #GstVideoInfo that is also initialized with gst_video_info_init(). a new #GstVideoInfo. free with gst_video_info_free(). Parse @caps to generate a #GstVideoInfo. A #GstVideoInfo, or %NULL if @caps couldn't be parsed a #GstCaps Adjust the offset and stride fields in @info so that the padding and stride alignment in @align is respected. Extra padding will be added to the right side when stride alignment padding is required and @align will be updated with the new padding values. %FALSE if alignment could not be applied, e.g. because the size of a frame can't be represented as a 32 bit integer (Since: 1.12) a #GstVideoInfo alignment parameters Extra padding will be added to the right side when stride alignment padding is required and @align will be updated with the new padding values. This variant of gst_video_info_align() provides the updated size, in bytes, of each video plane after the alignment, including all horizontal and vertical paddings. In case of GST_VIDEO_INTERLACE_MODE_ALTERNATE info, the returned sizes are the ones used to hold a single field, not the full frame. %FALSE if alignment could not be applied, e.g. because the size of a frame can't be represented as a 32 bit integer a #GstVideoInfo alignment parameters array used to store the plane sizes Converts among various #GstFormat types. This function handles GST_FORMAT_BYTES, GST_FORMAT_TIME, and GST_FORMAT_DEFAULT. For raw video, GST_FORMAT_DEFAULT corresponds to video frames. This function can be used to handle pad queries of the type GST_QUERY_CONVERT. TRUE if the conversion was successful. a #GstVideoInfo #GstFormat of the @src_value value to convert #GstFormat of the @dest_value pointer to destination value Copy a GstVideoInfo structure. a new #GstVideoInfo. free with gst_video_info_free. a #GstVideoInfo Free a GstVideoInfo structure previously allocated with gst_video_info_new() or gst_video_info_copy(). a #GstVideoInfo Compares two #GstVideoInfo and returns whether they are equal or not %TRUE if @info and @other are equal, else %FALSE. a #GstVideoInfo a #GstVideoInfo Set the default info for a video frame of @format and @width and @height. Note: This initializes @info first, no values are preserved. This function does not set the offsets correctly for interlaced vertically subsampled formats. %FALSE if the returned video info is invalid, e.g. because the size of a frame can't be represented as a 32 bit integer (Since: 1.12) a #GstVideoInfo the format a width a height Same as #gst_video_info_set_format but also allowing to set the interlaced mode. %FALSE if the returned video info is invalid, e.g. because the size of a frame can't be represented as a 32 bit integer. a #GstVideoInfo the format a #GstVideoInterlaceMode a width a height Convert the values of @info into a #GstCaps. a new #GstCaps containing the info of @info. a #GstVideoInfo Parse @caps and update @info. TRUE if @caps could be parsed #GstVideoInfo a #GstCaps Initialize @info with default values. a #GstVideoInfo Information describing a DMABuf image properties. It wraps #GstVideoInfo and adds DRM information such as drm-fourcc and drm-modifier, required for negotiation and mapping. the associated #GstVideoInfo the fourcc defined by drm the drm modifier Allocate a new #GstVideoInfoDmaDrm that is also initialized with gst_video_info_dma_drm_init(). a new #GstVideoInfoDmaDrm. Free it with gst_video_info_dma_drm_free(). Parse @caps to generate a #GstVideoInfoDmaDrm. Please note that the @caps should be a dma drm caps. The gst_video_is_dma_drm_caps() can be used to verify it before calling this function. A #GstVideoInfoDmaDrm, or %NULL if @caps couldn't be parsed. a #GstCaps Free a #GstVideoInfoDmaDrm structure previously allocated with gst_video_info_dma_drm_new() a #GstVideoInfoDmaDrm Convert the values of @drm_info into a #GstCaps. Please note that the @caps returned will be a dma drm caps which sets format field to DMA_DRM, and contains a new drm-format field. The value of drm-format field is composed of a drm fourcc and a modifier, such as NV12:0x0100000000000002. a new #GstCaps containing the info in @drm_info. a #GstVideoInfoDmaDrm Convert the #GstVideoInfoDmaDrm into a traditional #GstVideoInfo with recognized video format. For DMA kind memory, the non linear DMA format should be recognized as #GST_VIDEO_FORMAT_DMA_DRM. This helper function sets @info's video format into the default value according to @drm_info's drm_fourcc field. %TRUE if @info is converted correctly. a #GstVideoInfoDmaDrm #GstVideoInfo Parse @caps and update @info. Please note that the @caps should be a dma drm caps. The gst_video_is_dma_drm_caps() can be used to verify it before calling this function. TRUE if @caps could be parsed #GstVideoInfoDmaDrm a #GstCaps Fills @drm_info if @info's format has a valid drm format and @modifier is also valid %TRUE if @drm_info is filled correctly. #GstVideoInfoDmaDrm a #GstVideoInfo the associated modifier value. Initialize @drm_info with default values. a #GstVideoInfoDmaDrm The possible values of the #GstVideoInterlaceMode describing the interlace mode of the stream. all frames are progressive 2 fields are interleaved in one video frame. Extra buffer flags describe the field order. frames contains both interlaced and progressive video, the buffer flags describe the frame and fields. 2 fields are stored in one buffer, use the frame ID to get access to the required field. For multiview (the 'views' property > 1) the fields of view N can be found at frame ID (N * 2) and (N * 2) + 1. Each field has only half the amount of lines as noted in the height property. This mode requires multiple GstVideoMeta metadata to describe the fields. 1 field is stored in one buffer, @GST_VIDEO_BUFFER_FLAG_TF or @GST_VIDEO_BUFFER_FLAG_BF indicates if the buffer is carrying the top or bottom field, respectively. The top and bottom buffers must alternate in the pipeline, with this mode (Since: 1.16). Convert @mode to a #GstVideoInterlaceMode the #GstVideoInterlaceMode of @mode or #GST_VIDEO_INTERLACE_MODE_PROGRESSIVE when @mode is not a valid string representation for a #GstVideoInterlaceMode. a mode Convert @mode to its string representation. @mode as a string. a #GstVideoInterlaceMode Mastering display color volume information defined by SMPTE ST 2086 (a.k.a static HDR metadata). the xy coordinates of primaries in the CIE 1931 color space. the index 0 contains red, 1 is for green and 2 is for blue. each value is normalized to 50000 (meaning that in unit of 0.00002) the xy coordinates of white point in the CIE 1931 color space. each value is normalized to 50000 (meaning that in unit of 0.00002) the maximum value of display luminance in unit of 0.0001 candelas per square metre (cd/m^2 and nit) the minimum value of display luminance in unit of 0.0001 candelas per square metre (cd/m^2 and nit) Set string representation of @minfo to @caps %TRUE if @minfo was successfully set to @caps a #GstVideoMasteringDisplayInfo a #GstCaps Parse @caps and update @minfo %TRUE if @caps has #GstVideoMasteringDisplayInfo and could be parsed a #GstVideoMasteringDisplayInfo a #GstCaps Initialize @minfo a #GstVideoMasteringDisplayInfo Checks equality between @minfo and @other. %TRUE if @minfo and @other are equal. a #GstVideoMasteringDisplayInfo a #GstVideoMasteringDisplayInfo Convert @minfo to its string representation a string representation of @minfo a #GstVideoMasteringDisplayInfo Extract #GstVideoMasteringDisplayInfo from @mastering %TRUE if @minfo was filled with @mastering a #GstVideoMasteringDisplayInfo a #GstStructure representing #GstVideoMasteringDisplayInfo Used to represent display_primaries and white_point of #GstVideoMasteringDisplayInfo struct. See #GstVideoMasteringDisplayInfo the x coordinate of CIE 1931 color space in unit of 0.00002. the y coordinate of CIE 1931 color space in unit of 0.00002. Different color matrix conversion modes do conversion between color matrices use the input color matrix to convert to and from R'G'B use the output color matrix to convert to and from R'G'B disable color matrix conversion. Extra buffer metadata describing image properties This meta can also be used by downstream elements to specifiy their buffer layout requirements for upstream. Upstream should try to fit those requirements, if possible, in order to prevent buffer copies. This is done by passing a custom #GstStructure to gst_query_add_allocation_meta() when handling the ALLOCATION query. This structure should be named 'video-meta' and can have the following fields: - padding-top (uint): extra pixels on the top - padding-bottom (uint): extra pixels on the bottom - padding-left (uint): extra pixels on the left side - padding-right (uint): extra pixels on the right side The padding fields have the same semantic as #GstVideoMeta.alignment and so represent the paddings requested on produced video buffers. Since 1.24 it can be serialized using gst_meta_serialize() and gst_meta_deserialize(). parent #GstMeta the buffer this metadata belongs to additional video flags the video format identifier of the frame the video width the video height the number of planes in the image array of offsets for the planes. This field might not always be valid, it is used by the default implementation of @map. array of strides for the planes. This field might not always be valid, it is used by the default implementation of @map. the paddings and alignment constraints of the video buffer. It is up to the caller of `gst_buffer_add_video_meta_full()` to set it using gst_video_meta_set_alignment(), if they did not it defaults to no padding and no alignment. Since: 1.18 Compute the padded height of each plane from @meta (padded size divided by stride). It is not valid to call this function with a meta associated to a TILED video format. %TRUE if @meta's alignment is valid and @plane_height has been updated, %FALSE otherwise a #GstVideoMeta array used to store the plane height Compute the size, in bytes, of each video plane described in @meta including any padding and alignment constraint defined in @meta->alignment. %TRUE if @meta's alignment is valid and @plane_size has been updated, %FALSE otherwise a #GstVideoMeta array used to store the plane sizes Map the video plane with index @plane in @meta and return a pointer to the first byte of the plane and the stride of the plane. TRUE if the map operation was successful. a #GstVideoMeta a plane a #GstMapInfo the data of @plane the stride of @plane @GstMapFlags Set the alignment of @meta to @alignment. This function checks that the paddings defined in @alignment are compatible with the strides defined in @meta and will fail to update if they are not. %TRUE if @alignment's meta has been updated, %FALSE if not a #GstVideoMeta a #GstVideoAlignment Unmap a previously mapped plane with gst_video_meta_map(). TRUE if the memory was successfully unmapped. a #GstVideoMeta a plane a #GstMapInfo Extra data passed to a video transform #GstMetaTransformFunction such as: "gst-video-scale". the input #GstVideoInfo the output #GstVideoInfo Get the #GQuark for the "gst-video-scale" metadata transform operation. a #GQuark GstVideoMultiviewFlags are used to indicate extra properties of a stereo/multiview stream beyond the frame layout and buffer mapping that is conveyed in the #GstVideoMultiviewMode. No flags For stereo streams, the normal arrangement of left and right views is reversed. The left view is vertically mirrored. The left view is horizontally mirrored. The right view is vertically mirrored. The right view is horizontally mirrored. For frame-packed multiview modes, indicates that the individual views have been encoded with half the true width or height and should be scaled back up for display. This flag is used for overriding input layout interpretation by adjusting pixel-aspect-ratio. For side-by-side, column interleaved or checkerboard packings, the pixel width will be doubled. For row interleaved and top-bottom encodings, pixel height will be doubled. The video stream contains both mono and multiview portions, signalled on each buffer by the absence or presence of the @GST_VIDEO_BUFFER_FLAG_MULTIPLE_VIEW buffer flag. See #GstVideoMultiviewFlags. #GstVideoMultiviewFramePacking represents the subset of #GstVideoMultiviewMode values that can be applied to any video frame without needing extra metadata. It can be used by elements that provide a property to override the multiview interpretation of a video stream when the video doesn't contain any markers. This enum is used (for example) on playbin, to re-interpret a played video stream as a stereoscopic video. The individual enum values are equivalent to and have the same value as the matching #GstVideoMultiviewMode. A special value indicating no frame packing info. All frames are monoscopic. All frames represent a left-eye view. All frames represent a right-eye view. Left and right eye views are provided in the left and right half of the frame respectively. Left and right eye views are provided in the left and right half of the frame, but have been sampled using quincunx method, with half-pixel offset between the 2 views. Alternating vertical columns of pixels represent the left and right eye view respectively. Alternating horizontal rows of pixels represent the left and right eye view respectively. The top half of the frame contains the left eye, and the bottom half the right eye. Pixels are arranged with alternating pixels representing left and right eye views in a checkerboard fashion. All possible stereoscopic 3D and multiview representations. In conjunction with #GstVideoMultiviewFlags, describes how multiview content is being transported in the stream. A special value indicating no multiview information. Used in GstVideoInfo and other places to indicate that no specific multiview handling has been requested or provided. This value is never carried on caps. All frames are monoscopic. All frames represent a left-eye view. All frames represent a right-eye view. Left and right eye views are provided in the left and right half of the frame respectively. Left and right eye views are provided in the left and right half of the frame, but have been sampled using quincunx method, with half-pixel offset between the 2 views. Alternating vertical columns of pixels represent the left and right eye view respectively. Alternating horizontal rows of pixels represent the left and right eye view respectively. The top half of the frame contains the left eye, and the bottom half the right eye. Pixels are arranged with alternating pixels representing left and right eye views in a checkerboard fashion. Left and right eye views are provided in separate frames alternately. Multiple independent views are provided in separate frames in sequence. This method only applies to raw video buffers at the moment. Specific view identification is via the `GstVideoMultiviewMeta` and #GstVideoMeta(s) on raw video buffers. Multiple views are provided as separate #GstMemory framebuffers attached to each #GstBuffer, described by the `GstVideoMultiviewMeta` and #GstVideoMeta(s) The #GstVideoMultiviewMode value Given a string from a caps multiview-mode field, output the corresponding #GstVideoMultiviewMode or #GST_VIDEO_MULTIVIEW_MODE_NONE multiview-mode field string from caps Given a #GstVideoMultiviewMode returns the multiview-mode caps string for insertion into a caps structure The caps string representation of the mode, or NULL if invalid. A #GstVideoMultiviewMode value The interface allows unified access to control flipping and autocenter operation of video-sources or operators. Parses the "image-orientation" tag and transforms it into the #GstVideoOrientationMethod enum. TRUE if there was a valid "image-orientation" tag in the taglist. A #GstTagList The location where to return the orientation. Get the horizontal centering offset from the given object. %TRUE in case the element supports centering #GstVideoOrientation interface of a #GstElement return location for the result Get the horizontal flipping state (%TRUE for flipped) from the given object. %TRUE in case the element supports flipping #GstVideoOrientation interface of a #GstElement return location for the result Get the vertical centering offset from the given object. %TRUE in case the element supports centering #GstVideoOrientation interface of a #GstElement return location for the result Get the vertical flipping state (%TRUE for flipped) from the given object. %TRUE in case the element supports flipping #GstVideoOrientation interface of a #GstElement return location for the result Set the horizontal centering offset for the given object. %TRUE in case the element supports centering #GstVideoOrientation interface of a #GstElement centering offset Set the horizontal flipping state (%TRUE for flipped) for the given object. %TRUE in case the element supports flipping #GstVideoOrientation interface of a #GstElement use flipping Set the vertical centering offset for the given object. %TRUE in case the element supports centering #GstVideoOrientation interface of a #GstElement centering offset Set the vertical flipping state (%TRUE for flipped) for the given object. %TRUE in case the element supports flipping #GstVideoOrientation interface of a #GstElement use flipping Get the horizontal centering offset from the given object. %TRUE in case the element supports centering #GstVideoOrientation interface of a #GstElement return location for the result Get the horizontal flipping state (%TRUE for flipped) from the given object. %TRUE in case the element supports flipping #GstVideoOrientation interface of a #GstElement return location for the result Get the vertical centering offset from the given object. %TRUE in case the element supports centering #GstVideoOrientation interface of a #GstElement return location for the result Get the vertical flipping state (%TRUE for flipped) from the given object. %TRUE in case the element supports flipping #GstVideoOrientation interface of a #GstElement return location for the result Set the horizontal centering offset for the given object. %TRUE in case the element supports centering #GstVideoOrientation interface of a #GstElement centering offset Set the horizontal flipping state (%TRUE for flipped) for the given object. %TRUE in case the element supports flipping #GstVideoOrientation interface of a #GstElement use flipping Set the vertical centering offset for the given object. %TRUE in case the element supports centering #GstVideoOrientation interface of a #GstElement centering offset Set the vertical flipping state (%TRUE for flipped) for the given object. %TRUE in case the element supports flipping #GstVideoOrientation interface of a #GstElement use flipping #GstVideoOrientationInterface interface. parent interface type. %TRUE in case the element supports flipping #GstVideoOrientation interface of a #GstElement return location for the result %TRUE in case the element supports flipping #GstVideoOrientation interface of a #GstElement return location for the result %TRUE in case the element supports centering #GstVideoOrientation interface of a #GstElement return location for the result %TRUE in case the element supports centering #GstVideoOrientation interface of a #GstElement return location for the result %TRUE in case the element supports flipping #GstVideoOrientation interface of a #GstElement use flipping %TRUE in case the element supports flipping #GstVideoOrientation interface of a #GstElement use flipping %TRUE in case the element supports centering #GstVideoOrientation interface of a #GstElement centering offset %TRUE in case the element supports centering #GstVideoOrientation interface of a #GstElement centering offset The different video orientation methods. Identity (no rotation) Rotate clockwise 90 degrees Rotate 180 degrees Rotate counter-clockwise 90 degrees Flip horizontally Flip vertically Rotate counter-clockwise 90 degrees and flip vertically Rotate clockwise 90 degrees and flip vertically Select flip method based on image-orientation tag Current status depends on plugin internal setup The #GstVideoOverlay interface is used for 2 main purposes : * To get a grab on the Window where the video sink element is going to render. This is achieved by either being informed about the Window identifier that the video sink element generated, or by forcing the video sink element to use a specific Window identifier for rendering. * To force a redrawing of the latest video frame the video sink element displayed on the Window. Indeed if the #GstPipeline is in #GST_STATE_PAUSED state, moving the Window around will damage its content. Application developers will want to handle the Expose events themselves and force the video sink element to refresh the Window's content. Using the Window created by the video sink is probably the simplest scenario, in some cases, though, it might not be flexible enough for application developers if they need to catch events such as mouse moves and button clicks. Setting a specific Window identifier on the video sink element is the most flexible solution but it has some issues. Indeed the application needs to set its Window identifier at the right time to avoid internal Window creation from the video sink element. To solve this issue a #GstMessage is posted on the bus to inform the application that it should set the Window identifier immediately. Here is an example on how to do that correctly: |[ static GstBusSyncReply create_window (GstBus * bus, GstMessage * message, GstPipeline * pipeline) { // ignore anything but 'prepare-window-handle' element messages if (!gst_is_video_overlay_prepare_window_handle_message (message)) return GST_BUS_PASS; win = XCreateSimpleWindow (disp, root, 0, 0, 320, 240, 0, 0, 0); XSetWindowBackgroundPixmap (disp, win, None); XMapRaised (disp, win); XSync (disp, FALSE); gst_video_overlay_set_window_handle (GST_VIDEO_OVERLAY (GST_MESSAGE_SRC (message)), win); gst_message_unref (message); return GST_BUS_DROP; } ... int main (int argc, char **argv) { ... bus = gst_pipeline_get_bus (GST_PIPELINE (pipeline)); gst_bus_set_sync_handler (bus, (GstBusSyncHandler) create_window, pipeline, NULL); ... } ]| ## Two basic usage scenarios There are two basic usage scenarios: in the simplest case, the application uses #playbin or #playsink or knows exactly what particular element is used for video output, which is usually the case when the application creates the videosink to use (e.g. #xvimagesink, #ximagesink, etc.) itself; in this case, the application can just create the videosink element, create and realize the window to render the video on and then call gst_video_overlay_set_window_handle() directly with the XID or native window handle, before starting up the pipeline. As #playbin and #playsink implement the video overlay interface and proxy it transparently to the actual video sink even if it is created later, this case also applies when using these elements. In the other and more common case, the application does not know in advance what GStreamer video sink element will be used for video output. This is usually the case when an element such as #autovideosink is used. In this case, the video sink element itself is created asynchronously from a GStreamer streaming thread some time after the pipeline has been started up. When that happens, however, the video sink will need to know right then whether to render onto an already existing application window or whether to create its own window. This is when it posts a prepare-window-handle message, and that is also why this message needs to be handled in a sync bus handler which will be called from the streaming thread directly (because the video sink will need an answer right then). As response to the prepare-window-handle element message in the bus sync handler, the application may use gst_video_overlay_set_window_handle() to tell the video sink to render onto an existing window surface. At this point the application should already have obtained the window handle / XID, so it just needs to set it. It is generally not advisable to call any GUI toolkit functions or window system functions from the streaming thread in which the prepare-window-handle message is handled, because most GUI toolkits and windowing systems are not thread-safe at all and a lot of care would be required to co-ordinate the toolkit and window system calls of the different threads (Gtk+ users please note: prior to Gtk+ 2.18 `GDK_WINDOW_XID` was just a simple structure access, so generally fine to do within the bus sync handler; this macro was changed to a function call in Gtk+ 2.18 and later, which is likely to cause problems when called from a sync handler; see below for a better approach without `GDK_WINDOW_XID` used in the callback). ## GstVideoOverlay and Gtk+ |[ #include <gst/video/videooverlay.h> #include <gtk/gtk.h> #ifdef GDK_WINDOWING_X11 #include <gdk/gdkx.h> // for GDK_WINDOW_XID #endif #ifdef GDK_WINDOWING_WIN32 #include <gdk/gdkwin32.h> // for GDK_WINDOW_HWND #endif ... static guintptr video_window_handle = 0; ... static GstBusSyncReply bus_sync_handler (GstBus * bus, GstMessage * message, gpointer user_data) { // ignore anything but 'prepare-window-handle' element messages if (!gst_is_video_overlay_prepare_window_handle_message (message)) return GST_BUS_PASS; if (video_window_handle != 0) { GstVideoOverlay *overlay; // GST_MESSAGE_SRC (message) will be the video sink element overlay = GST_VIDEO_OVERLAY (GST_MESSAGE_SRC (message)); gst_video_overlay_set_window_handle (overlay, video_window_handle); } else { g_warning ("Should have obtained video_window_handle by now!"); } gst_message_unref (message); return GST_BUS_DROP; } ... static void video_widget_realize_cb (GtkWidget * widget, gpointer data) { #if GTK_CHECK_VERSION(2,18,0) // Tell Gtk+/Gdk to create a native window for this widget instead of // drawing onto the parent widget. // This is here just for pedagogical purposes, GDK_WINDOW_XID will call // it as well in newer Gtk versions if (!gdk_window_ensure_native (widget->window)) g_error ("Couldn't create native window needed for GstVideoOverlay!"); #endif #ifdef GDK_WINDOWING_X11 { gulong xid = GDK_WINDOW_XID (gtk_widget_get_window (video_window)); video_window_handle = xid; } #endif #ifdef GDK_WINDOWING_WIN32 { HWND wnd = GDK_WINDOW_HWND (gtk_widget_get_window (video_window)); video_window_handle = (guintptr) wnd; } #endif } ... int main (int argc, char **argv) { GtkWidget *video_window; GtkWidget *app_window; ... app_window = gtk_window_new (GTK_WINDOW_TOPLEVEL); ... video_window = gtk_drawing_area_new (); g_signal_connect (video_window, "realize", G_CALLBACK (video_widget_realize_cb), NULL); gtk_widget_set_double_buffered (video_window, FALSE); ... // usually the video_window will not be directly embedded into the // application window like this, but there will be many other widgets // and the video window will be embedded in one of them instead gtk_container_add (GTK_CONTAINER (ap_window), video_window); ... // show the GUI gtk_widget_show_all (app_window); // realize window now so that the video window gets created and we can // obtain its XID/HWND before the pipeline is started up and the videosink // asks for the XID/HWND of the window to render onto gtk_widget_realize (video_window); // we should have the XID/HWND now g_assert (video_window_handle != 0); ... // set up sync handler for setting the xid once the pipeline is started bus = gst_pipeline_get_bus (GST_PIPELINE (pipeline)); gst_bus_set_sync_handler (bus, (GstBusSyncHandler) bus_sync_handler, NULL, NULL); gst_object_unref (bus); ... gst_element_set_state (pipeline, GST_STATE_PLAYING); ... } ]| ## GstVideoOverlay and Qt |[ #include <glib.h>; #include <gst/gst.h>; #include <gst/video/videooverlay.h>; #include <QApplication>; #include <QTimer>; #include <QWidget>; int main(int argc, char *argv[]) { if (!g_thread_supported ()) g_thread_init (NULL); gst_init (&argc, &argv); QApplication app(argc, argv); app.connect(&app, SIGNAL(lastWindowClosed()), &app, SLOT(quit ())); // prepare the pipeline GstElement *pipeline = gst_pipeline_new ("xvoverlay"); GstElement *src = gst_element_factory_make ("videotestsrc", NULL); GstElement *sink = gst_element_factory_make ("xvimagesink", NULL); gst_bin_add_many (GST_BIN (pipeline), src, sink, NULL); gst_element_link (src, sink); // prepare the ui QWidget window; window.resize(320, 240); window.show(); WId xwinid = window.winId(); gst_video_overlay_set_window_handle (GST_VIDEO_OVERLAY (sink), xwinid); // run the pipeline GstStateChangeReturn sret = gst_element_set_state (pipeline, GST_STATE_PLAYING); if (sret == GST_STATE_CHANGE_FAILURE) { gst_element_set_state (pipeline, GST_STATE_NULL); gst_object_unref (pipeline); // Exit application QTimer::singleShot(0, QApplication::activeWindow(), SLOT(quit())); } int ret = app.exec(); window.hide(); gst_element_set_state (pipeline, GST_STATE_NULL); gst_object_unref (pipeline); return ret; } ]| This helper shall be used by classes implementing the #GstVideoOverlay interface that want the render rectangle to be controllable using properties. This helper will install "render-rectangle" property into the class. The class on which the properties will be installed The first free property ID to use This helper shall be used by classes implementing the #GstVideoOverlay interface that want the render rectangle to be controllable using properties. This helper will parse and set the render rectangle calling gst_video_overlay_set_render_rectangle(). %TRUE if the @property_id matches the GstVideoOverlay property The instance on which the property is set The highest property ID. The property ID The #GValue to be set Tell an overlay that it has been exposed. This will redraw the current frame in the drawable even if the pipeline is PAUSED. a #GstVideoOverlay to expose. Tell an overlay that it should handle events from the window system. These events are forwarded upstream as navigation events. In some window system, events are not propagated in the window hierarchy if a client is listening for them. This method allows you to disable events handling completely from the #GstVideoOverlay. a #GstVideoOverlay to expose. a #gboolean indicating if events should be handled or not. This will call the video overlay's set_window_handle method. You should use this method to tell to an overlay to display video output to a specific window (e.g. an XWindow on X11). Passing 0 as the @handle will tell the overlay to stop using that window and create an internal one. a #GstVideoOverlay to set the window on. a handle referencing the window. Tell an overlay that it has been exposed. This will redraw the current frame in the drawable even if the pipeline is PAUSED. a #GstVideoOverlay to expose. This will post a "have-window-handle" element message on the bus. This function should only be used by video overlay plugin developers. a #GstVideoOverlay which got a window a platform-specific handle referencing the window Tell an overlay that it should handle events from the window system. These events are forwarded upstream as navigation events. In some window system, events are not propagated in the window hierarchy if a client is listening for them. This method allows you to disable events handling completely from the #GstVideoOverlay. a #GstVideoOverlay to expose. a #gboolean indicating if events should be handled or not. This will post a "prepare-window-handle" element message on the bus to give applications an opportunity to call gst_video_overlay_set_window_handle() before a plugin creates its own window. This function should only be used by video overlay plugin developers. a #GstVideoOverlay which does not yet have an Window handle set Configure a subregion as a video target within the window set by gst_video_overlay_set_window_handle(). If this is not used or not supported the video will fill the area of the window set as the overlay to 100%. By specifying the rectangle, the video can be overlayed to a specific region of that window only. After setting the new rectangle one should call gst_video_overlay_expose() to force a redraw. To unset the region pass -1 for the @width and @height parameters. This method is needed for non fullscreen video overlay in UI toolkits that do not support subwindows. %FALSE if not supported by the sink. a #GstVideoOverlay the horizontal offset of the render area inside the window the vertical offset of the render area inside the window the width of the render area inside the window the height of the render area inside the window This will call the video overlay's set_window_handle method. You should use this method to tell to an overlay to display video output to a specific window (e.g. an XWindow on X11). Passing 0 as the @handle will tell the overlay to stop using that window and create an internal one. a #GstVideoOverlay to set the window on. a handle referencing the window. Functions to create and handle overlay compositions on video buffers. An overlay composition describes one or more overlay rectangles to be blended on top of a video buffer. This API serves two main purposes: * it can be used to attach overlay information (subtitles or logos) to non-raw video buffers such as GL/VAAPI/VDPAU surfaces. The actual blending of the overlay can then be done by e.g. the video sink that processes these non-raw buffers. * it can also be used to blend overlay rectangles on top of raw video buffers, thus consolidating blending functionality for raw video in one place. Together, this allows existing overlay elements to easily handle raw and non-raw video as input in without major changes (once the overlays have been put into a #GstVideoOverlayComposition object anyway) - for raw video the overlay can just use the blending function to blend the data on top of the video, and for surface buffers it can just attach them to the buffer and let the sink render the overlays. Creates a new video overlay composition object to hold one or more overlay rectangles. Note that since 1.20 this allows to pass %NULL for @rectangle. a new #GstVideoOverlayComposition. Unref with gst_video_overlay_composition_unref() when no longer needed. a #GstVideoOverlayRectangle to add to the composition Adds an overlay rectangle to an existing overlay composition object. This must be done right after creating the overlay composition. a #GstVideoOverlayComposition a #GstVideoOverlayRectangle to add to the composition Blends the overlay rectangles in @comp on top of the raw video data contained in @video_buf. The data in @video_buf must be writable and mapped appropriately. Since @video_buf data is read and will be modified, it ought be mapped with flag GST_MAP_READWRITE. a #GstVideoOverlayComposition a #GstVideoFrame containing raw video data in a supported format. It should be mapped using GST_MAP_READWRITE Makes a copy of @comp and all contained rectangles, so that it is possible to modify the composition and contained rectangles (e.g. add additional rectangles or change the render co-ordinates or render dimension). The actual overlay pixel data buffers contained in the rectangles are not copied. a new #GstVideoOverlayComposition equivalent to @comp. a #GstVideoOverlayComposition to copy Returns the @n-th #GstVideoOverlayRectangle contained in @comp. the @n-th rectangle, or NULL if @n is out of bounds. Will not return a new reference, the caller will need to obtain her own reference using gst_video_overlay_rectangle_ref() if needed. a #GstVideoOverlayComposition number of the rectangle to get Returns the sequence number of this composition. Sequence numbers are monotonically increasing and unique for overlay compositions and rectangles (meaning there will never be a rectangle with the same sequence number as a composition). the sequence number of @comp a #GstVideoOverlayComposition Takes ownership of @comp and returns a version of @comp that is writable (i.e. can be modified). Will either return @comp right away, or create a new writable copy of @comp and unref @comp itself. All the contained rectangles will also be copied, but the actual overlay pixel data buffers contained in the rectangles are not copied. a writable #GstVideoOverlayComposition equivalent to @comp. a #GstVideoOverlayComposition to copy Returns the number of #GstVideoOverlayRectangle<!-- -->s contained in @comp. the number of rectangles a #GstVideoOverlayComposition Extra buffer metadata describing image overlay data. parent #GstMeta the attached #GstVideoOverlayComposition Overlay format flags. no flags RGB are premultiplied by A/255. a global-alpha value != 1 is set. #GstVideoOverlay interface parent interface type. a #GstVideoOverlay to expose. a #GstVideoOverlay to expose. a #gboolean indicating if events should be handled or not. a #GstVideoOverlay to set the window on. a handle referencing the window. An opaque video overlay rectangle object. A rectangle contains a single overlay rectangle which can be added to a composition. Creates a new video overlay rectangle with ARGB or AYUV pixel data. The layout in case of ARGB of the components in memory is B-G-R-A on little-endian platforms (corresponding to #GST_VIDEO_FORMAT_BGRA) and A-R-G-B on big-endian platforms (corresponding to #GST_VIDEO_FORMAT_ARGB). In other words, pixels are treated as 32-bit words and the lowest 8 bits then contain the blue component value and the highest 8 bits contain the alpha component value. Unless specified in the flags, the RGB values are non-premultiplied. This is the format that is used by most hardware, and also many rendering libraries such as Cairo, for example. The pixel data buffer must have #GstVideoMeta set. a new #GstVideoOverlayRectangle. Unref with gst_video_overlay_rectangle_unref() when no longer needed. a #GstBuffer pointing to the pixel memory the X co-ordinate on the video where the top-left corner of this overlay rectangle should be rendered to the Y co-ordinate on the video where the top-left corner of this overlay rectangle should be rendered to the render width of this rectangle on the video the render height of this rectangle on the video flags Makes a copy of @rectangle, so that it is possible to modify it (e.g. to change the render co-ordinates or render dimension). The actual overlay pixel data buffers contained in the rectangle are not copied. a new #GstVideoOverlayRectangle equivalent to @rectangle. a #GstVideoOverlayRectangle to copy Retrieves the flags associated with a #GstVideoOverlayRectangle. This is useful if the caller can handle both premultiplied alpha and non premultiplied alpha, for example. By knowing whether the rectangle uses premultiplied or not, it can request the pixel data in the format it is stored in, to avoid unnecessary conversion. the #GstVideoOverlayFormatFlags associated with the rectangle. a #GstVideoOverlayRectangle Retrieves the global-alpha value associated with a #GstVideoOverlayRectangle. the global-alpha value associated with the rectangle. a #GstVideoOverlayRectangle a #GstBuffer holding the ARGB pixel data with width and height of the render dimensions as per gst_video_overlay_rectangle_get_render_rectangle(). This function does not return a reference, the caller should obtain a reference of her own with gst_buffer_ref() if needed. a #GstVideoOverlayRectangle flags If a global_alpha value != 1 is set for the rectangle, the caller should set the #GST_VIDEO_OVERLAY_FORMAT_FLAG_GLOBAL_ALPHA flag if he wants to apply global-alpha himself. If the flag is not set global_alpha is applied internally before returning the pixel-data. a #GstBuffer holding the AYUV pixel data with width and height of the render dimensions as per gst_video_overlay_rectangle_get_render_rectangle(). This function does not return a reference, the caller should obtain a reference of her own with gst_buffer_ref() if needed. a #GstVideoOverlayRectangle flags If a global_alpha value != 1 is set for the rectangle, the caller should set the #GST_VIDEO_OVERLAY_FORMAT_FLAG_GLOBAL_ALPHA flag if he wants to apply global-alpha himself. If the flag is not set global_alpha is applied internally before returning the pixel-data. a #GstBuffer holding the pixel data with format as originally provided and specified in video meta with width and height of the render dimensions as per gst_video_overlay_rectangle_get_render_rectangle(). This function does not return a reference, the caller should obtain a reference of her own with gst_buffer_ref() if needed. a #GstVideoOverlayRectangle flags If a global_alpha value != 1 is set for the rectangle, the caller should set the #GST_VIDEO_OVERLAY_FORMAT_FLAG_GLOBAL_ALPHA flag if he wants to apply global-alpha himself. If the flag is not set global_alpha is applied internally before returning the pixel-data. Retrieves the pixel data as it is. This is useful if the caller can do the scaling itself when handling the overlaying. The rectangle will need to be scaled to the render dimensions, which can be retrieved using gst_video_overlay_rectangle_get_render_rectangle(). a #GstBuffer holding the ARGB pixel data with #GstVideoMeta set. This function does not return a reference, the caller should obtain a reference of her own with gst_buffer_ref() if needed. a #GstVideoOverlayRectangle flags. If a global_alpha value != 1 is set for the rectangle, the caller should set the #GST_VIDEO_OVERLAY_FORMAT_FLAG_GLOBAL_ALPHA flag if he wants to apply global-alpha himself. If the flag is not set global_alpha is applied internally before returning the pixel-data. Retrieves the pixel data as it is. This is useful if the caller can do the scaling itself when handling the overlaying. The rectangle will need to be scaled to the render dimensions, which can be retrieved using gst_video_overlay_rectangle_get_render_rectangle(). a #GstBuffer holding the AYUV pixel data with #GstVideoMeta set. This function does not return a reference, the caller should obtain a reference of her own with gst_buffer_ref() if needed. a #GstVideoOverlayRectangle flags. If a global_alpha value != 1 is set for the rectangle, the caller should set the #GST_VIDEO_OVERLAY_FORMAT_FLAG_GLOBAL_ALPHA flag if he wants to apply global-alpha himself. If the flag is not set global_alpha is applied internally before returning the pixel-data. Retrieves the pixel data as it is. This is useful if the caller can do the scaling itself when handling the overlaying. The rectangle will need to be scaled to the render dimensions, which can be retrieved using gst_video_overlay_rectangle_get_render_rectangle(). a #GstBuffer holding the pixel data with #GstVideoMeta set. This function does not return a reference, the caller should obtain a reference of her own with gst_buffer_ref() if needed. a #GstVideoOverlayRectangle flags. If a global_alpha value != 1 is set for the rectangle, the caller should set the #GST_VIDEO_OVERLAY_FORMAT_FLAG_GLOBAL_ALPHA flag if he wants to apply global-alpha himself. If the flag is not set global_alpha is applied internally before returning the pixel-data. Retrieves the render position and render dimension of the overlay rectangle on the video. TRUE if valid render dimensions were retrieved. a #GstVideoOverlayRectangle address where to store the X render offset address where to store the Y render offset address where to store the render width address where to store the render height Returns the sequence number of this rectangle. Sequence numbers are monotonically increasing and unique for overlay compositions and rectangles (meaning there will never be a rectangle with the same sequence number as a composition). Using the sequence number of a rectangle as an indicator for changed pixel-data of a rectangle is dangereous. Some API calls, like e.g. gst_video_overlay_rectangle_set_global_alpha(), automatically update the per rectangle sequence number, which is misleading for renderers/ consumers, that handle global-alpha themselves. For them the pixel-data returned by gst_video_overlay_rectangle_get_pixels_*() won't be different for different global-alpha values. In this case a renderer could also use the GstBuffer pointers as a hint for changed pixel-data. the sequence number of @rectangle a #GstVideoOverlayRectangle Sets the global alpha value associated with a #GstVideoOverlayRectangle. Per- pixel alpha values are multiplied with this value. Valid values: 0 <= global_alpha <= 1; 1 to deactivate. @rectangle must be writable, meaning its refcount must be 1. You can make the rectangles inside a #GstVideoOverlayComposition writable using gst_video_overlay_composition_make_writable() or gst_video_overlay_composition_copy(). a #GstVideoOverlayRectangle Global alpha value (0 to 1.0) Sets the render position and dimensions of the rectangle on the video. This function is mainly for elements that modify the size of the video in some way (e.g. through scaling or cropping) and need to adjust the details of any overlays to match the operation that changed the size. @rectangle must be writable, meaning its refcount must be 1. You can make the rectangles inside a #GstVideoOverlayComposition writable using gst_video_overlay_composition_make_writable() or gst_video_overlay_composition_copy(). a #GstVideoOverlayRectangle render X position of rectangle on video render Y position of rectangle on video render width of rectangle render height of rectangle The different flags that can be used when packing and unpacking. No flag When the source has a smaller depth than the target format, set the least significant bits of the target to 0. This is likely slightly faster but less accurate. When this flag is not specified, the most significant bits of the source are duplicated in the least significant bits of the destination. The source is interlaced. The unpacked format will be interlaced as well with each line containing information from alternating fields. (Since: 1.2) Different primaries conversion modes disable conversion between primaries do conversion between primaries only when it can be merged with color matrix conversion. fast conversion between primaries Helper structure representing a rectangular area. X coordinate of rectangle's top-left point Y coordinate of rectangle's top-left point width of the rectangle height of the rectangle Extra buffer metadata describing an image region of interest parent #GstMeta GQuark describing the semantic of the Roi (f.i. a face, a pedestrian) identifier of this particular ROI identifier of its parent ROI, used f.i. for ROI hierarchisation. x component of upper-left corner y component of upper-left corner bounding box width bounding box height list of #GstStructure containing element-specific params for downstream, see gst_video_region_of_interest_meta_add_param(). (Since: 1.14) Attach element-specific parameters to @meta meant to be used by downstream elements which may handle this ROI. The name of @s is used to identify the element these parameters are meant for. This is typically used to tell encoders how they should encode this specific region. For example, a structure named "roi/x264enc" could be used to give the QP offsets this encoder should use when encoding the region described in @meta. Multiple parameters can be defined for the same meta so different encoders can be supported by cross platform applications). a #GstVideoRegionOfInterestMeta a #GstStructure Retrieve the parameter for @meta having @name as structure name, or %NULL if there is none. See also: gst_video_region_of_interest_meta_add_param() a #GstStructure a #GstVideoRegionOfInterestMeta a name. #GstVideoResampler is a structure which holds the information required to perform various kinds of resampling filtering. the input size the output size the maximum number of taps the number of phases array with the source offset for each output element array with the phase to use for each output element array with new number of taps for each phase the taps for all phases Clear a previously initialized #GstVideoResampler @resampler. a #GstVideoResampler Different resampler flags. no flags when no taps are given, half the number of calculated taps. This can be used when making scalers for the different fields of an interlaced picture. Since: 1.10 Different subsampling and upsampling methods Duplicates the samples when upsampling and drops when downsampling Uses linear interpolation to reconstruct missing samples and averaging to downsample Uses cubic interpolation Uses sinc interpolation Uses lanczos interpolation H.264 H.265 metadata from SEI User Data Unregistered messages parent #GstMeta User Data Unregistered UUID Unparsed data buffer Size of the data buffer #GstMetaInfo pointer that describes #GstVideoSEIUserDataUnregisteredMeta. #GstVideoScaler is a utility object for rescaling and resampling video frames using various interpolation / sampling methods. Scale a rectangle of pixels in @src with @src_stride to @dest with @dest_stride using the horizontal scaler @hscaler and the vertical scaler @vscale. One or both of @hscale and @vscale can be NULL to only perform scaling in one dimension or do a copy without scaling. @x and @y are the coordinates in the destination image to process. a horizontal #GstVideoScaler a vertical #GstVideoScaler a #GstVideoFormat for @srcs and @dest source pixels source pixels stride destination pixels destination pixels stride the horizontal destination offset the vertical destination offset the number of output pixels to scale the number of output lines to scale Combine a scaler for Y and UV into one scaler for the packed @format. a new horizontal videoscaler for @format. a scaler for the Y component a scaler for the U and V components the input video format the output video format Free a previously allocated #GstVideoScaler @scale. a #GstVideoScaler For a given pixel at @out_offset, get the first required input pixel at @in_offset and the @n_taps filter coefficients. Note that for interlaced content, @in_offset needs to be incremented with 2 to get the next input line. an array of @n_tap gdouble values with filter coefficients. a #GstVideoScaler an output offset result input offset result n_taps Get the maximum number of taps for @scale. the maximum number of taps a #GstVideoScaler Horizontally scale the pixels in @src to @dest, starting from @dest_offset for @width samples. a #GstVideoScaler a #GstVideoFormat for @src and @dest source pixels destination pixels the horizontal destination offset the number of pixels to scale Vertically combine @width pixels in the lines in @src_lines to @dest. @dest is the location of the target line at @dest_offset and @srcs are the input lines for @dest_offset. a #GstVideoScaler a #GstVideoFormat for @srcs and @dest source pixels lines destination pixels the vertical destination offset the number of pixels to scale Make a new @method video scaler. @in_size source lines/pixels will be scaled to @out_size destination lines/pixels. @n_taps specifies the amount of pixels to use from the source for one output pixel. If n_taps is 0, this function chooses a good value automatically based on the @method and @in_size/@out_size. a #GstVideoScaler a #GstVideoResamplerMethod #GstVideoScalerFlags number of taps to use number of source elements number of destination elements extra options Different scale flags. no flags Set up a scaler for interlaced content Provides useful functions and a base class for video sinks. GstVideoSink will configure the default base sink to drop frames that arrive later than 20ms as this is considered the default threshold for observing out-of-sync frames. Use gst_video_center_rect() instead. the #GstVideoRectangle describing the source area the #GstVideoRectangle describing the destination area a pointer to a #GstVideoRectangle which will receive the result area a #gboolean indicating if scaling should be applied or not Notifies the subclass of changed #GstVideoInfo. A #GstCaps. A #GstVideoInfo corresponding to @caps. Whether to show video frames during preroll. If set to %FALSE, video frames will only be rendered in PLAYING state. video width (derived class needs to set this) video height (derived class needs to set this) The video sink class structure. Derived classes should override the @show_frame virtual function. the parent class structure A #GstCaps. A #GstVideoInfo corresponding to @caps. Description of a tile. This structure allow to describe arbitrary tile dimensions and sizes. The width in pixels of a tile. This value can be zero if the number of pixels per line is not an integer value. The stride (in bytes) of a tile line. Regardless if the tile have sub-tiles this stride multiplied by the height should be equal to #GstVideoTileInfo.size. This value is used to translate into linear stride when older APIs are being used to expose this format. The size in bytes of a tile. This value must be divisible by #GstVideoTileInfo.stride. Enum value describing the available tiling modes. Unknown or unset tile mode Every four adjacent blocks - two horizontally and two vertically are grouped together and are located in memory in Z or flipped Z order. In case of odd rows, the last row of blocks is arranged in linear order. Tiles are in row order. Enum value describing the most common tiling types. Tiles are indexed. Use gst_video_tile_get_index () to retrieve the tile at the requested coordinates. @field_count must be 0 for progressive video and 1 or 2 for interlaced. A representation of a SMPTE time code. @hours must be positive and less than 24. Will wrap around otherwise. @minutes and @seconds must be positive and less than 60. @frames must be less than or equal to @config.fps_n / @config.fps_d These values are *NOT* automatically normalized. the corresponding #GstVideoTimeCodeConfig the hours field of #GstVideoTimeCode the minutes field of #GstVideoTimeCode the seconds field of #GstVideoTimeCode the frames field of #GstVideoTimeCode Interlaced video field count @field_count is 0 for progressive, 1 or 2 for interlaced. @latest_daiy_jam reference is stolen from caller. a new #GstVideoTimeCode with the given values. The values are not checked for being in a valid range. To see if your timecode actually has valid content, use gst_video_time_code_is_valid(). Numerator of the frame rate Denominator of the frame rate The latest daily jam of the #GstVideoTimeCode #GstVideoTimeCodeFlags the hours field of #GstVideoTimeCode the minutes field of #GstVideoTimeCode the seconds field of #GstVideoTimeCode the frames field of #GstVideoTimeCode Interlaced video field count a new empty, invalid #GstVideoTimeCode The resulting config->latest_daily_jam is set to midnight, and timecode is set to the given time. This might return a completely invalid timecode, use gst_video_time_code_new_from_date_time_full() to ensure that you would get %NULL instead in that case. the #GstVideoTimeCode representation of @dt. Numerator of the frame rate Denominator of the frame rate #GDateTime to convert #GstVideoTimeCodeFlags Interlaced video field count The resulting config->latest_daily_jam is set to midnight, and timecode is set to the given time. the #GstVideoTimeCode representation of @dt, or %NULL if no valid timecode could be created. Numerator of the frame rate Denominator of the frame rate #GDateTime to convert #GstVideoTimeCodeFlags Interlaced video field count a new #GstVideoTimeCode from the given string or %NULL if the string could not be passed. The string that represents the #GstVideoTimeCode Adds or subtracts @frames amount of frames to @tc. tc needs to contain valid data, as verified by gst_video_time_code_is_valid(). a valid #GstVideoTimeCode How many frames to add or subtract This makes a component-wise addition of @tc_inter to @tc. For example, adding ("01:02:03:04", "00:01:00:00") will return "01:03:03:04". When it comes to drop-frame timecodes, adding ("00:00:00;00", "00:01:00:00") will return "00:01:00;02" because of drop-frame oddities. However, adding ("00:09:00;02", "00:01:00:00") will return "00:10:00;00" because this time we can have an exact minute. A new #GstVideoTimeCode with @tc_inter added or %NULL if the interval can't be added. The #GstVideoTimeCode where the diff should be added. This must contain valid timecode values. The #GstVideoTimeCodeInterval to add to @tc. The interval must contain valid values, except that for drop-frame timecode, it may also contain timecodes which would normally be dropped. These are then corrected to the next reasonable timecode. Initializes @tc with empty/zero/NULL values and frees any memory it might currently use. a #GstVideoTimeCode Compares @tc1 and @tc2. If both have latest daily jam information, it is taken into account. Otherwise, it is assumed that the daily jam of both @tc1 and @tc2 was at the same time. Both time codes must be valid. 1 if @tc1 is after @tc2, -1 if @tc1 is before @tc2, 0 otherwise. a valid #GstVideoTimeCode another valid #GstVideoTimeCode a new #GstVideoTimeCode with the same values as @tc. a #GstVideoTimeCode how many frames have passed since the daily jam of @tc. a valid #GstVideoTimeCode Frees @tc. a #GstVideoTimeCode Adds one frame to @tc. a valid #GstVideoTimeCode @field_count is 0 for progressive, 1 or 2 for interlaced. @latest_daiy_jam reference is stolen from caller. Initializes @tc with the given values. The values are not checked for being in a valid range. To see if your timecode actually has valid content, use gst_video_time_code_is_valid(). a #GstVideoTimeCode Numerator of the frame rate Denominator of the frame rate The latest daily jam of the #GstVideoTimeCode #GstVideoTimeCodeFlags the hours field of #GstVideoTimeCode the minutes field of #GstVideoTimeCode the seconds field of #GstVideoTimeCode the frames field of #GstVideoTimeCode Interlaced video field count The resulting config->latest_daily_jam is set to midnight, and timecode is set to the given time. Will assert on invalid parameters, use gst_video_time_code_init_from_date_time_full() for being able to handle invalid parameters. an uninitialized #GstVideoTimeCode Numerator of the frame rate Denominator of the frame rate #GDateTime to convert #GstVideoTimeCodeFlags Interlaced video field count The resulting config->latest_daily_jam is set to midnight, and timecode is set to the given time. %TRUE if @tc could be correctly initialized to a valid timecode a #GstVideoTimeCode Numerator of the frame rate Denominator of the frame rate #GDateTime to convert #GstVideoTimeCodeFlags Interlaced video field count whether @tc is a valid timecode (supported frame rate, hours/minutes/seconds/frames not overflowing) #GstVideoTimeCode to check how many nsec have passed since the daily jam of @tc. a valid #GstVideoTimeCode The @tc.config->latest_daily_jam is required to be non-NULL. the #GDateTime representation of @tc or %NULL if @tc has no daily jam. A valid #GstVideoTimeCode to convert the SMPTE ST 2059-1:2015 string representation of @tc. That will take the form hh:mm:ss:ff. The last separator (between seconds and frames) may vary: ';' for drop-frame, non-interlaced content and for drop-frame interlaced field 2 ',' for drop-frame interlaced field 1 ':' for non-drop-frame, non-interlaced content and for non-drop-frame interlaced field 2 '.' for non-drop-frame interlaced field 1 A #GstVideoTimeCode to convert Supported frame rates: 30000/1001, 60000/1001 (both with and without drop frame), and integer frame rates e.g. 25/1, 30/1, 50/1, 60/1. The configuration of the time code. Numerator of the frame rate Denominator of the frame rate the corresponding #GstVideoTimeCodeFlags The latest daily jam information, if present, or NULL Flags related to the time code information. For drop frame, only 30000/1001 and 60000/1001 frame rates are supported. No flags Whether we have drop frame rate Whether we have interlaced video A representation of a difference between two #GstVideoTimeCode instances. Will not necessarily correspond to a real timecode (e.g. 00:00:10;00) the hours field of #GstVideoTimeCodeInterval the minutes field of #GstVideoTimeCodeInterval the seconds field of #GstVideoTimeCodeInterval the frames field of #GstVideoTimeCodeInterval a new #GstVideoTimeCodeInterval with the given values. the hours field of #GstVideoTimeCodeInterval the minutes field of #GstVideoTimeCodeInterval the seconds field of #GstVideoTimeCodeInterval the frames field of #GstVideoTimeCodeInterval @tc_inter_str must only have ":" as separators. a new #GstVideoTimeCodeInterval from the given string or %NULL if the string could not be passed. The string that represents the #GstVideoTimeCodeInterval Initializes @tc with empty/zero/NULL values. a #GstVideoTimeCodeInterval a new #GstVideoTimeCodeInterval with the same values as @tc. a #GstVideoTimeCodeInterval Frees @tc. a #GstVideoTimeCodeInterval Initializes @tc with the given values. a #GstVideoTimeCodeInterval the hours field of #GstVideoTimeCodeInterval the minutes field of #GstVideoTimeCodeInterval the seconds field of #GstVideoTimeCodeInterval the frames field of #GstVideoTimeCodeInterval Extra buffer metadata describing the GstVideoTimeCode of the frame. Each frame is assumed to have its own timecode, i.e. they are not automatically incremented/interpolated. parent #GstMeta the GstVideoTimeCode to attach The video transfer function defines the formula for converting between non-linear RGB (R'G'B') and linear RGB unknown transfer function linear RGB, gamma 1.0 curve Gamma 1.8 curve Gamma 2.0 curve Gamma 2.2 curve Gamma 2.2 curve with a linear segment in the lower range, also ITU-R BT470M / ITU-R BT1700 625 PAL & SECAM / ITU-R BT1361 Gamma 2.2 curve with a linear segment in the lower range Gamma 2.4 curve with a linear segment in the lower range. IEC 61966-2-1 (sRGB or sYCC) Gamma 2.8 curve, also ITU-R BT470BG Logarithmic transfer characteristic 100:1 range Logarithmic transfer characteristic 316.22777:1 range (100 * sqrt(10) : 1) Gamma 2.2 curve with a linear segment in the lower range. Used for BT.2020 with 12 bits per component. Since: 1.6 Gamma 2.19921875. Since: 1.8 Rec. ITU-R BT.2020-2 with 10 bits per component. (functionally the same as the values GST_VIDEO_TRANSFER_BT709 and GST_VIDEO_TRANSFER_BT601). Since: 1.18 SMPTE ST 2084 for 10, 12, 14, and 16-bit systems. Known as perceptual quantization (PQ) Since: 1.18 Association of Radio Industries and Businesses (ARIB) STD-B67 and Rec. ITU-R BT.2100-1 hybrid loggamma (HLG) system Since: 1.18 also known as SMPTE170M / ITU-R BT1358 525 or 625 / ITU-R BT1700 NTSC Convert @val to its gamma decoded value. This is the inverse operation of gst_video_color_transfer_encode(). For a non-linear value L' in the range [0..1], conversion to the linear L is in general performed with a power function like: |[ L = L' ^ gamma ]| Depending on @func, different formulas might be applied. Some formulas encode a linear segment in the lower range. the gamma decoded value of @val a #GstVideoTransferFunction a value Convert @val to its gamma encoded value. For a linear value L in the range [0..1], conversion to the non-linear (gamma encoded) L' is in general performed with a power function like: |[ L' = L ^ (1 / gamma) ]| Depending on @func, different formulas might be applied. Some formulas encode a linear segment in the lower range. the gamma encoded value of @val a #GstVideoTransferFunction a value Converts the @value to the #GstVideoTransferFunction The transfer characteristics (TransferCharacteristics) value is defined by "ISO/IEC 23001-8 Section 7.2 Table 3" and "ITU-T H.273 Table 3". "H.264 Table E-4" and "H.265 Table E.4" share the identical values. the matched #GstVideoTransferFunction a ITU-T H.273 transfer characteristics value Returns whether @from_func and @to_func are equivalent. There are cases (e.g. BT601, BT709, and BT2020_10) where several functions are functionally identical. In these cases, when doing conversion, we should consider them as equivalent. Also, BT2020_12 is the same as the aforementioned three for less than 12 bits per pixel. TRUE if @from_func and @to_func can be considered equivalent. #GstVideoTransferFunction to convert from bits per pixel to convert from #GstVideoTransferFunction to convert into bits per pixel to convert into Converts #GstVideoTransferFunction to the "transfer characteristics" (TransferCharacteristics) value defined by "ISO/IEC 23001-8 Section 7.2 Table 3" and "ITU-T H.273 Table 3". "H.264 Table E-4" and "H.265 Table E.4" share the identical values. The value of ISO/IEC 23001-8 transfer characteristics. a #GstVideoTransferFunction An encoder for writing ancillary data to the Vertical Blanking Interval lines of component signals. Create a new #GstVideoVBIEncoder for the specified @format and @pixel_width. The new #GstVideoVBIEncoder or %NULL if the @format and/or @pixel_width is not supported. a #GstVideoFormat The width in pixel to use Stores Video Ancillary data, according to SMPTE-291M specification. Note that the contents of the data are always read as 8bit data (i.e. do not contain the parity check bits). %TRUE if enough space was left in the current line, %FALSE otherwise. a #GstVideoVBIEncoder %TRUE if composite ADF should be created, component otherwise The Data Identifier The Secondary Data Identifier (if type 2) or the Data Block Number (if type 1) The user data content of the Ancillary packet. Does not contain the ADF, DID, SDID nor CS. The amount of data (in bytes) in @data (max 255 bytes) Frees the @encoder. a #GstVideoVBIEncoder A parser for detecting and extracting @GstVideoAncillary data from Vertical Blanking Interval lines of component signals. Create a new #GstVideoVBIParser for the specified @format and @pixel_width. The new #GstVideoVBIParser or %NULL if the @format and/or @pixel_width is not supported. a #GstVideoFormat The width in pixel to use Provide a new line of data to the @parser. Call gst_video_vbi_parser_get_ancillary() to get the Ancillary data that might be present on that line. a #GstVideoVBIParser The line of data to parse Frees the @parser. a #GstVideoVBIParser Parse the line provided previously by gst_video_vbi_parser_add_line(). %GST_VIDEO_VBI_PARSER_RESULT_OK if ancillary data was found and @anc was filled. %GST_VIDEO_VBI_PARSER_RESULT_DONE if there wasn't any data. a #GstVideoVBIParser a #GstVideoAncillary to start the eventual ancillary data Return values for #GstVideoVBIParser No line were provided, or no more Ancillary data was found. A #GstVideoAncillary was found. An error occurred Adds a new #GstAncillaryMeta to the @buffer. The caller is responsible for setting the appropriate fields. A new #GstAncillaryMeta, or %NULL if an error happened. A #GstBuffer Attaches #GstVideoAFDMeta metadata to @buffer with the given parameters. the #GstVideoAFDMeta on @buffer. a #GstBuffer 0 for progressive or field 1 and 1 for field 2 #GstVideoAFDSpec that applies to AFD value #GstVideoAFDValue AFD enumeration Attaches GstVideoAffineTransformationMeta metadata to @buffer with the given parameters. the #GstVideoAffineTransformationMeta on @buffer. a #GstBuffer Attaches #GstVideoBarMeta metadata to @buffer with the given parameters. the #GstVideoBarMeta on @buffer. See Table 6.11 Bar Data Syntax https://www.atsc.org/wp-content/uploads/2015/03/a_53-Part-4-2009.pdf a #GstBuffer 0 for progressive or field 1 and 1 for field 2 if true then bar data specifies letterbox, otherwise pillarbox If @is_letterbox is true, then the value specifies the last line of a horizontal letterbox bar area at top of reconstructed frame. Otherwise, it specifies the last horizontal luminance sample of a vertical pillarbox bar area at the left side of the reconstructed frame If @is_letterbox is true, then the value specifies the first line of a horizontal letterbox bar area at bottom of reconstructed frame. Otherwise, it specifies the first horizontal luminance sample of a vertical pillarbox bar area at the right side of the reconstructed frame. Attaches #GstVideoCaptionMeta metadata to @buffer with the given parameters. the #GstVideoCaptionMeta on @buffer. a #GstBuffer The type of Closed Caption to add The Closed Caption data The size of @data in bytes Attaches a #GstVideoCodecAlphaMeta metadata to @buffer with the given alpha buffer. the #GstVideoCodecAlphaMeta on @buffer. a #GstBuffer a #GstBuffer Attaches GstVideoGLTextureUploadMeta metadata to @buffer with the given parameters. the #GstVideoGLTextureUploadMeta on @buffer. a #GstBuffer the #GstVideoGLTextureOrientation the number of textures array of #GstVideoGLTextureType the function to upload the buffer to a specific texture ID user data for the implementor of @upload function to copy @user_data function to free @user_data Attaches GstVideoMeta metadata to @buffer with the given parameters and the default offsets and strides for @format and @width x @height. This function calculates the default offsets and strides and then calls gst_buffer_add_video_meta_full() with them. the #GstVideoMeta on @buffer. a #GstBuffer #GstVideoFrameFlags a #GstVideoFormat the width the height Attaches GstVideoMeta metadata to @buffer with the given parameters. the #GstVideoMeta on @buffer. a #GstBuffer #GstVideoFrameFlags a #GstVideoFormat the width the height number of planes offset of each plane stride of each plane Sets an overlay composition on a buffer. The buffer will obtain its own reference to the composition, meaning this function does not take ownership of @comp. a #GstVideoOverlayCompositionMeta a #GstBuffer a #GstVideoOverlayComposition Attaches #GstVideoRegionOfInterestMeta metadata to @buffer with the given parameters. the #GstVideoRegionOfInterestMeta on @buffer. a #GstBuffer Type of the region of interest (e.g. "face") X position Y position width height Attaches #GstVideoRegionOfInterestMeta metadata to @buffer with the given parameters. the #GstVideoRegionOfInterestMeta on @buffer. a #GstBuffer Type of the region of interest (e.g. "face") X position Y position width height Attaches #GstVideoSEIUserDataUnregisteredMeta metadata to @buffer with the given parameters. the #GstVideoSEIUserDataUnregisteredMeta on @buffer. a #GstBuffer User Data Unregistered UUID SEI User Data Unregistered buffer size of the data buffer Attaches #GstVideoTimeCodeMeta metadata to @buffer with the given parameters. the #GstVideoTimeCodeMeta on @buffer, or (since 1.16) %NULL if the timecode was invalid. a #GstBuffer a #GstVideoTimeCode Attaches #GstVideoTimeCodeMeta metadata to @buffer with the given parameters. the #GstVideoTimeCodeMeta on @buffer, or (since 1.16) %NULL if the timecode was invalid. a #GstBuffer framerate numerator framerate denominator a #GDateTime for the latest daily jam a #GstVideoTimeCodeFlags hours since the daily jam minutes since the daily jam seconds since the daily jam frames since the daily jam fields since the daily jam Gets the #GstAncillaryMeta that might be present on @b. Note: It is quite likely that there might be more than one ancillary meta on a given buffer. This function will only return the first one. See gst_buffer_iterate_ancillary_meta() for a way to iterate over all ancillary metas of the buffer. A #GstBuffer Gets the #GstVideoAFDMeta that might be present on @b. Note: there may be two #GstVideoAFDMeta structs for interlaced video. A #GstBuffer Gets the #GstVideoBarMeta that might be present on @b. A #GstBuffer Gets the #GstVideoCaptionMeta that might be present on @b. A #GstBuffer Helper macro to get #GstVideoCodecAlphaMeta from an existing #GstBuffer. A #GstBuffer pointer, must be writable. Find the #GstVideoMeta on @buffer with the lowest @id. Buffers can contain multiple #GstVideoMeta metadata items when dealing with multiview buffers. the #GstVideoMeta with lowest id (usually 0) or %NULL when there is no such metadata on @buffer. a #GstBuffer Find the #GstVideoMeta on @buffer with the given @id. Buffers can contain multiple #GstVideoMeta metadata items when dealing with multiview buffers. the #GstVideoMeta with @id or %NULL when there is no such metadata on @buffer. a #GstBuffer a metadata id Find the #GstVideoRegionOfInterestMeta on @buffer with the given @id. Buffers can contain multiple #GstVideoRegionOfInterestMeta metadata items if multiple regions of interests are marked on a frame. the #GstVideoRegionOfInterestMeta with @id or %NULL when there is no such metadata on @buffer. a #GstBuffer a metadata id Gets the GstVideoSEIUserDataUnregisteredMeta that might be present on @b. A #GstBuffer Retrieves the next #GstAncillaryMeta after the current one according to @s. If @s points to %NULL, the first #GstAncillaryMeta will be returned (if any). @s will be updated with an opaque state pointer. A #GstBuffer An opaque state pointer Get the video alignment from the bufferpool configuration @config in in @align %TRUE if @config could be parsed correctly. a #GstStructure a #GstVideoAlignment Set the video alignment in @align to the bufferpool configuration @config a #GstStructure a #GstVideoAlignment This library contains some helper functions and includes the videosink and videofilter base classes. A collection of objects and methods to assist with handling Ancillary Data present in Vertical Blanking Interval as well as Closed Caption. The functions gst_video_chroma_from_string() and gst_video_chroma_to_string() convert between #GstVideoChromaSite and string descriptions. #GstVideoChromaResample is a utility object for resampling chroma planes and converting between different chroma sampling sitings. Special GstBufferPool subclass for raw video buffers. Allows configuration of video-specific requirements such as stride alignments or pixel padding, and can also be configured to automatically add #GstVideoMeta to the buffers. A collection of objects and methods to assist with SEI User Data Unregistered metadata in H.264 and H.265 streams. Convenience function to check if the given message is a "prepare-window-handle" message from a #GstVideoOverlay. whether @msg is a "prepare-window-handle" message a #GstMessage Try to retrieve x and y coordinates of a #GstNavigation event. A boolean indicating success. The #GstEvent to inspect. Pointer to a gdouble to receive the x coordinate of the navigation event. Pointer to a gdouble to receive the y coordinate of the navigation event. Inspect a #GstEvent and return the #GstNavigationEventType of the event, or #GST_NAVIGATION_EVENT_INVALID if the event is not a #GstNavigation event. A #GstEvent to inspect. Create a new navigation event given navigation command.. a new #GstEvent The navigation command to use. Create a new navigation event for the given key press. a new #GstEvent A string identifying the key press. a bit-mask representing the state of the modifier keys (e.g. Control, Shift and Alt). Create a new navigation event for the given key release. a new #GstEvent A string identifying the released key. a bit-mask representing the state of the modifier keys (e.g. Control, Shift and Alt). Create a new navigation event for the given key mouse button press. a new #GstEvent The number of the pressed mouse button. The x coordinate of the mouse cursor. The y coordinate of the mouse cursor. a bit-mask representing the state of the modifier keys (e.g. Control, Shift and Alt). Create a new navigation event for the given key mouse button release. a new #GstEvent The number of the released mouse button. The x coordinate of the mouse cursor. The y coordinate of the mouse cursor. a bit-mask representing the state of the modifier keys (e.g. Control, Shift and Alt). Create a new navigation event for the given key mouse double click. a new #GstEvent The number of the pressed mouse button. The x coordinate of the mouse cursor. The y coordinate of the mouse cursor. a bit-mask representing the state of the modifier keys (e.g. Control, Shift and Alt). Create a new navigation event for the new mouse location. a new #GstEvent The x coordinate of the mouse cursor. The y coordinate of the mouse cursor. a bit-mask representing the state of the modifier keys (e.g. Control, Shift and Alt). Create a new navigation event for the mouse scroll. a new #GstEvent The x coordinate of the mouse cursor. The y coordinate of the mouse cursor. The x component of the scroll movement. The y component of the scroll movement. a bit-mask representing the state of the modifier keys (e.g. Control, Shift and Alt). Create a new navigation event signalling that all currently active touch points are cancelled and should be discarded. For example, under Wayland this event might be sent when a swipe passes the threshold to be recognized as a gesture by the compositor. a new #GstEvent a bit-mask representing the state of the modifier keys (e.g. Control, Shift and Alt). Create a new navigation event for an added touch point. a new #GstEvent A number uniquely identifying this touch point. It must stay unique to this touch point at least until an up event is sent for the same identifier, or all touch points are cancelled. The x coordinate of the new touch point. The y coordinate of the new touch point. Pressure data of the touch point, from 0.0 to 1.0, or NaN if no data is available. a bit-mask representing the state of the modifier keys (e.g. Control, Shift and Alt). Create a new navigation event signalling the end of a touch frame. Touch frames signal that all previous down, motion and up events not followed by another touch frame event already should be considered simultaneous. a new #GstEvent a bit-mask representing the state of the modifier keys (e.g. Control, Shift and Alt). Create a new navigation event for a moved touch point. a new #GstEvent A number uniquely identifying this touch point. It must correlate to exactly one previous touch_start event. The x coordinate of the touch point. The y coordinate of the touch point. Pressure data of the touch point, from 0.0 to 1.0, or NaN if no data is available. a bit-mask representing the state of the modifier keys (e.g. Control, Shift and Alt). Create a new navigation event for a removed touch point. a new #GstEvent A number uniquely identifying this touch point. It must correlate to exactly one previous down event, but can be reused after sending this event. The x coordinate of the touch point. The y coordinate of the touch point. a bit-mask representing the state of the modifier keys (e.g. Control, Shift and Alt). Inspect a #GstNavigation command event and retrieve the enum value of the associated command. TRUE if the navigation command could be extracted, otherwise FALSE. A #GstEvent to inspect. Pointer to GstNavigationCommand to receive the type of the navigation event. Note: Modifier keys (as defined in #GstNavigationModifierType) [press](GST_NAVIGATION_EVENT_KEY_PRESS) and [release](GST_NAVIGATION_KEY_PRESS) events are generated even if those states are present on all other related events A #GstEvent to inspect. A pointer to a location to receive the string identifying the key press. The returned string is owned by the event, and valid only until the event is unreffed. TRUE if the event is a #GstNavigation event with associated modifiers state, otherwise FALSE. The #GstEvent to modify. a bit-mask representing the state of the modifier keys (e.g. Control, Shift and Alt). Retrieve the details of either a #GstNavigation mouse button press event or a mouse button release event. Determine which type the event is using gst_navigation_event_get_type() to retrieve the #GstNavigationEventType. TRUE if the button number and both coordinates could be extracted, otherwise FALSE. A #GstEvent to inspect. Pointer to a gint that will receive the button number associated with the event. Pointer to a gdouble to receive the x coordinate of the mouse button event. Pointer to a gdouble to receive the y coordinate of the mouse button event. Inspect a #GstNavigation mouse movement event and extract the coordinates of the event. TRUE if both coordinates could be extracted, otherwise FALSE. A #GstEvent to inspect. Pointer to a gdouble to receive the x coordinate of the mouse movement. Pointer to a gdouble to receive the y coordinate of the mouse movement. Inspect a #GstNavigation mouse scroll event and extract the coordinates of the event. TRUE if all coordinates could be extracted, otherwise FALSE. A #GstEvent to inspect. Pointer to a gdouble to receive the x coordinate of the mouse movement. Pointer to a gdouble to receive the y coordinate of the mouse movement. Pointer to a gdouble to receive the delta_x coordinate of the mouse movement. Pointer to a gdouble to receive the delta_y coordinate of the mouse movement. Retrieve the details of a #GstNavigation touch-down or touch-motion event. Determine which type the event is using gst_navigation_event_get_type() to retrieve the #GstNavigationEventType. TRUE if all details could be extracted, otherwise FALSE. A #GstEvent to inspect. Pointer to a guint that will receive the identifier unique to this touch point. Pointer to a gdouble that will receive the x coordinate of the touch event. Pointer to a gdouble that will receive the y coordinate of the touch event. Pointer to a gdouble that will receive the force of the touch event, in the range from 0.0 to 1.0. If pressure data is not available, NaN will be set instead. Retrieve the details of a #GstNavigation touch-up event. TRUE if all details could be extracted, otherwise FALSE. A #GstEvent to inspect. Pointer to a guint that will receive the identifier unique to this touch point. Pointer to a gdouble that will receive the x coordinate of the touch event. Pointer to a gdouble that will receive the y coordinate of the touch event. Try to set x and y coordinates on a #GstNavigation event. The event must be writable. A boolean indicating success. The #GstEvent to modify. The x coordinate to set. The y coordinate to set. Check a bus message to see if it is a #GstNavigation event, and return the #GstNavigationMessageType identifying the type of the message if so. The type of the #GstMessage, or #GST_NAVIGATION_MESSAGE_INVALID if the message is not a #GstNavigation notification. A #GstMessage to inspect. Creates a new #GstNavigation message with type #GST_NAVIGATION_MESSAGE_ANGLES_CHANGED for notifying an application that the current angle, or current number of angles available in a multiangle video has changed. The new #GstMessage. A #GstObject to set as source of the new message. The currently selected angle. The number of viewing angles now available. Creates a new #GstNavigation message with type #GST_NAVIGATION_MESSAGE_COMMANDS_CHANGED The new #GstMessage. A #GstObject to set as source of the new message. Creates a new #GstNavigation message with type #GST_NAVIGATION_MESSAGE_EVENT. The new #GstMessage. A #GstObject to set as source of the new message. A navigation #GstEvent Creates a new #GstNavigation message with type #GST_NAVIGATION_MESSAGE_MOUSE_OVER. The new #GstMessage. A #GstObject to set as source of the new message. %TRUE if the mouse has entered a clickable area of the display. %FALSE if it over a non-clickable area. Parse a #GstNavigation message of type GST_NAVIGATION_MESSAGE_ANGLES_CHANGED and extract the @cur_angle and @n_angles parameters. %TRUE if the message could be successfully parsed. %FALSE if not. A #GstMessage to inspect. A pointer to a #guint to receive the new current angle number, or NULL A pointer to a #guint to receive the new angle count, or NULL. Parse a #GstNavigation message of type #GST_NAVIGATION_MESSAGE_EVENT and extract contained #GstEvent. The caller must unref the @event when done with it. %TRUE if the message could be successfully parsed. %FALSE if not. A #GstMessage to inspect. a pointer to a #GstEvent to receive the contained navigation event. Parse a #GstNavigation message of type #GST_NAVIGATION_MESSAGE_MOUSE_OVER and extract the active/inactive flag. If the mouse over event is marked active, it indicates that the mouse is over a clickable area. %TRUE if the message could be successfully parsed. %FALSE if not. A #GstMessage to inspect. A pointer to a gboolean to receive the active/inactive state, or NULL. Inspect a #GstQuery and return the #GstNavigationQueryType associated with it if it is a #GstNavigation query. The #GstNavigationQueryType of the query, or #GST_NAVIGATION_QUERY_INVALID The query to inspect Create a new #GstNavigation angles query. When executed, it will query the pipeline for the set of currently available angles, which may be greater than one in a multiangle video. The new query. Create a new #GstNavigation commands query. When executed, it will query the pipeline for the set of currently available commands. The new query. Parse the current angle number in the #GstNavigation angles @query into the #guint pointed to by the @cur_angle variable, and the number of available angles into the #guint pointed to by the @n_angles variable. %TRUE if the query could be successfully parsed. %FALSE if not. a #GstQuery Pointer to a #guint into which to store the currently selected angle value from the query, or NULL Pointer to a #guint into which to store the number of angles value from the query, or NULL Parse the number of commands in the #GstNavigation commands @query. %TRUE if the query could be successfully parsed. %FALSE if not. a #GstQuery the number of commands in this query. Parse the #GstNavigation command query and retrieve the @nth command from it into @cmd. If the list contains less elements than @nth, @cmd will be set to #GST_NAVIGATION_COMMAND_INVALID. %TRUE if the query could be successfully parsed. %FALSE if not. a #GstQuery the nth command to retrieve. a pointer to store the nth command into. Set the #GstNavigation angles query result field in @query. a #GstQuery the current viewing angle to set. the number of viewing angles to set. Set the #GstNavigation command query result fields in @query. The number of commands passed must be equal to @n_commands. a #GstQuery the number of commands to set. An array containing @n_cmds @GstNavigationCommand values. Lets you blend the @src image into the @dest image The #GstVideoFrame where to blend @src in the #GstVideoFrame that we want to blend into The x offset in pixel where the @src image should be blended the y offset in pixel where the @src image should be blended the global_alpha each per-pixel alpha value is multiplied with Scales a buffer containing RGBA (or AYUV) video. This is an internal helper function which is used to scale subtitle overlays, and may be deprecated in the near future. Use #GstVideoScaler to scale video buffers instead. the #GstVideoInfo describing the video data in @src_buffer the source buffer containing video pixels to scale the height in pixels to scale the video data in @src_buffer to the width in pixels to scale the video data in @src_buffer to pointer to a #GstVideoInfo structure that will be filled in with the details for @dest_buffer a pointer to a #GstBuffer variable, which will be set to a newly-allocated buffer containing the scaled pixels. Given the Pixel Aspect Ratio and size of an input video frame, and the pixel aspect ratio of the intended display device, calculates the actual display ratio the video will be rendered with. A boolean indicating success and a calculated Display Ratio in the dar_n and dar_d parameters. The return value is FALSE in the case of integer overflow or other error. Numerator of the calculated display_ratio Denominator of the calculated display_ratio Width of the video frame in pixels Height of the video frame in pixels Numerator of the pixel aspect ratio of the input video. Denominator of the pixel aspect ratio of the input video. Numerator of the pixel aspect ratio of the display device Denominator of the pixel aspect ratio of the display device Parses fixed Closed Caption #GstCaps and returns the corresponding caption type, or %GST_VIDEO_CAPTION_TYPE_UNKNOWN. #GstVideoCaptionType. Fixed #GstCaps to parse Creates new caps corresponding to @type. new #GstCaps #GstVideoCaptionType Takes @src rectangle and position it at the center of @dst rectangle with or without @scaling. It handles clipping if the @src rectangle is bigger than the @dst one and @scaling is set to FALSE. a pointer to #GstVideoRectangle describing the source area a pointer to #GstVideoRectangle describing the destination area a pointer to a #GstVideoRectangle which will receive the result area a #gboolean indicating if scaling should be applied or not Convert @s to a #GstVideoChromaSite Use gst_video_chroma_site_from_string() instead. a #GstVideoChromaSite or %GST_VIDEO_CHROMA_SITE_UNKNOWN when @s does not contain a valid chroma description. a chromasite string Perform resampling of @width chroma pixels in @lines. a #GstVideoChromaResample pixel lines the number of pixels on one line Create a new resampler object for the given parameters. When @h_factor or @v_factor is > 0, upsampling will be used, otherwise subsampling is performed. a new #GstVideoChromaResample that should be freed with gst_video_chroma_resample_free() after usage. a #GstVideoChromaMethod a #GstVideoChromaSite #GstVideoChromaFlags the #GstVideoFormat horizontal resampling factor vertical resampling factor Convert @s to a #GstVideoChromaSite a #GstVideoChromaSite or %GST_VIDEO_CHROMA_SITE_UNKNOWN when @s does not contain a valid chroma-site description. a chromasite string Converts @site to its string representation. a string representation of @site or %NULL if @site contains undefined value or is equal to %GST_VIDEO_CHROMA_SITE_UNKNOWN a #GstVideoChromaSite Converts @site to its string representation. Use gst_video_chroma_site_to_string() instead. a string describing @site. a #GstVideoChromaSite #GType for the #GstVideoCodecAlphaMeta structure. #GstMetaInfo pointer that describes #GstVideoCodecAlphaMeta. Converts the @value to the #GstVideoColorMatrix The matrix coefficients (MatrixCoefficients) value is defined by "ISO/IEC 23001-8 Section 7.3 Table 4" and "ITU-T H.273 Table 4". "H.264 Table E-5" and "H.265 Table E.5" share the identical values. the matched #GstVideoColorMatrix a ITU-T H.273 matrix coefficients value Get the coefficients used to convert between Y'PbPr and R'G'B' using @matrix. When: |[ 0.0 <= [Y',R',G',B'] <= 1.0) (-0.5 <= [Pb,Pr] <= 0.5) ]| the general conversion is given by: |[ Y' = Kr*R' + (1-Kr-Kb)*G' + Kb*B' Pb = (B'-Y')/(2*(1-Kb)) Pr = (R'-Y')/(2*(1-Kr)) ]| and the other way around: |[ R' = Y' + Cr*2*(1-Kr) G' = Y' - Cb*2*(1-Kb)*Kb/(1-Kr-Kb) - Cr*2*(1-Kr)*Kr/(1-Kr-Kb) B' = Y' + Cb*2*(1-Kb) ]| TRUE if @matrix was a YUV color format and @Kr and @Kb contain valid values. a #GstVideoColorMatrix result red channel coefficient result blue channel coefficient Converts #GstVideoColorMatrix to the "matrix coefficients" (MatrixCoefficients) value defined by "ISO/IEC 23001-8 Section 7.3 Table 4" and "ITU-T H.273 Table 4". "H.264 Table E-5" and "H.265 Table E.5" share the identical values. The value of ISO/IEC 23001-8 matrix coefficients. a #GstVideoColorMatrix Converts the @value to the #GstVideoColorPrimaries The colour primaries (ColourPrimaries) value is defined by "ISO/IEC 23001-8 Section 7.1 Table 2" and "ITU-T H.273 Table 2". "H.264 Table E-3" and "H.265 Table E.3" share the identical values. the matched #GstVideoColorPrimaries a ITU-T H.273 colour primaries value Get information about the chromaticity coordinates of @primaries. a #GstVideoColorPrimariesInfo for @primaries. a #GstVideoColorPrimaries Checks whether @primaries and @other are functionally equivalent TRUE if @primaries and @other can be considered equivalent. a #GstVideoColorPrimaries another #GstVideoColorPrimaries Converts #GstVideoColorPrimaries to the "colour primaries" (ColourPrimaries) value defined by "ISO/IEC 23001-8 Section 7.1 Table 2" and "ITU-T H.273 Table 2". "H.264 Table E-3" and "H.265 Table E.3" share the identical values. The value of ISO/IEC 23001-8 colour primaries. a #GstVideoColorPrimaries Compute the offset and scale values for each component of @info. For each component, (c[i] - offset[i]) / scale[i] will scale the component c[i] to the range [0.0 .. 1.0]. The reverse operation (c[i] * scale[i]) + offset[i] can be used to convert the component values in range [0.0 .. 1.0] back to their representation in @info and @range. a #GstVideoColorRange a #GstVideoFormatInfo output offsets output scale Use gst_video_transfer_function_decode() instead. a #GstVideoTransferFunction a value Use gst_video_transfer_function_encode() instead. a #GstVideoTransferFunction a value Converts a raw video buffer into the specified output caps. The output caps can be any raw video formats or any image formats (jpeg, png, ...). The width, height and pixel-aspect-ratio can also be specified in the output caps. The converted #GstSample, or %NULL if an error happened (in which case @err will point to the #GError). a #GstSample the #GstCaps to convert to the maximum amount of time allowed for the processing. Converts a raw video buffer into the specified output caps. The output caps can be any raw video formats or any image formats (jpeg, png, ...). The width, height and pixel-aspect-ratio can also be specified in the output caps. @callback will be called after conversion, when an error occurred or if conversion didn't finish after @timeout. @callback will always be called from the thread default %GMainContext, see g_main_context_get_thread_default(). If GLib before 2.22 is used, this will always be the global default main context. @destroy_notify will be called after the callback was called and @user_data is not needed anymore. a #GstSample the #GstCaps to convert to the maximum amount of time allowed for the processing. %GstVideoConvertSampleCallback that will be called after conversion. extra data that will be passed to the @callback %GDestroyNotify to be called after @user_data is not needed anymore Create a new converter object to convert between @in_info and @out_info with @config. Returns (nullable): a #GstVideoConverter or %NULL if conversion is not possible. a #GstVideoInfo a #GstVideoInfo a #GstStructure with configuration options Create a new converter object to convert between @in_info and @out_info with @config. The optional @pool can be used to spawn threads, this is useful when creating new converters rapidly, for example when updating cropping. Returns (nullable): a #GstVideoConverter or %NULL if conversion is not possible. a #GstVideoInfo a #GstVideoInfo a #GstStructure with configuration options a #GstTaskPool to spawn threads from Make a new dither object for dithering lines of @format using the algorithm described by @method. Each component will be quantized to a multiple of @quantizer. Better performance is achieved when @quantizer is a power of 2. @width is the width of the lines that this ditherer will handle. a new #GstVideoDither a #GstVideoDitherMethod a #GstVideoDitherFlags a #GstVideoFormat quantizer the width of the lines Converting the video format into dma drm fourcc. If no matching fourcc found, then DRM_FORMAT_INVALID is returned. the DRM_FORMAT_* corresponding to the @format. a #GstVideoFormat Convert the @format_str string into the drm fourcc value. The @modifier is also parsed if we want. Please note that the @format_str should follow the fourcc:modifier kind style, such as NV12:0x0100000000000002 The drm fourcc value or DRM_FORMAT_INVALID if @format_str is invalid. a drm format string Return the modifier in @format or %NULL to ignore. Converting a dma drm fourcc into the video format. If no matching video format found, then GST_VIDEO_FORMAT_UNKNOWN is returned. the GST_VIDEO_FORMAT_* corresponding to the @fourcc. the dma drm value. Returns a string containing drm kind format, such as NV12:0x0100000000000002, or NULL otherwise. the drm kind string composed of to @fourcc and @modifier. a drm fourcc value. the associated modifier value. Checks if an event is a force key unit event. Returns true for both upstream and downstream force key unit events. %TRUE if the event is a valid force key unit event A #GstEvent to check Creates a new downstream force key unit event. A downstream force key unit event can be sent down the pipeline to request downstream elements to produce a key unit. A downstream force key unit event must also be sent when handling an upstream force key unit event to notify downstream that the latter has been handled. To parse an event created by gst_video_event_new_downstream_force_key_unit() use gst_video_event_parse_downstream_force_key_unit(). The new GstEvent the timestamp of the buffer that starts a new key unit the stream_time of the buffer that starts a new key unit the running_time of the buffer that starts a new key unit %TRUE to produce headers when starting a new key unit integer that can be used to number key units Creates a new Still Frame event. If @in_still is %TRUE, then the event represents the start of a still frame sequence. If it is %FALSE, then the event ends a still frame sequence. To parse an event created by gst_video_event_new_still_frame() use gst_video_event_parse_still_frame(). The new GstEvent boolean value for the still-frame state of the event. Creates a new upstream force key unit event. An upstream force key unit event can be sent to request upstream elements to produce a key unit. @running_time can be set to request a new key unit at a specific running_time. If set to GST_CLOCK_TIME_NONE, upstream elements will produce a new key unit as soon as possible. To parse an event created by gst_video_event_new_downstream_force_key_unit() use gst_video_event_parse_downstream_force_key_unit(). The new GstEvent the running_time at which a new key unit should be produced %TRUE to produce headers when starting a new key unit integer that can be used to number key units Get timestamp, stream-time, running-time, all-headers and count in the force key unit event. See gst_video_event_new_downstream_force_key_unit() for a full description of the downstream force key unit event. @running_time will be adjusted for any pad offsets of pads it was passing through. %TRUE if the event is a valid downstream force key unit event. A #GstEvent to parse A pointer to the timestamp in the event A pointer to the stream-time in the event A pointer to the running-time in the event A pointer to the all_headers flag in the event A pointer to the count field of the event Parse a #GstEvent, identify if it is a Still Frame event, and return the still-frame state from the event if it is. If the event represents the start of a still frame, the in_still variable will be set to TRUE, otherwise FALSE. It is OK to pass NULL for the in_still variable order to just check whether the event is a valid still-frame event. Create a still frame event using gst_video_event_new_still_frame() %TRUE if the event is a valid still-frame event. %FALSE if not A #GstEvent to parse A boolean to receive the still-frame status from the event, or NULL Get running-time, all-headers and count in the force key unit event. See gst_video_event_new_upstream_force_key_unit() for a full description of the upstream force key unit event. Create an upstream force key unit event using gst_video_event_new_upstream_force_key_unit() @running_time will be adjusted for any pad offsets of pads it was passing through. %TRUE if the event is a valid upstream force-key-unit event. %FALSE if not A #GstEvent to parse A pointer to the running_time in the event A pointer to the all_headers flag in the event A pointer to the count field in the event Convert @order to a #GstVideoFieldOrder the #GstVideoFieldOrder of @order or #GST_VIDEO_FIELD_ORDER_UNKNOWN when @order is not a valid string representation for a #GstVideoFieldOrder. a field order Convert @order to its string representation. @order as a string. a #GstVideoFieldOrder Converts a FOURCC value into the corresponding #GstVideoFormat. If the FOURCC cannot be represented by #GstVideoFormat, #GST_VIDEO_FORMAT_UNKNOWN is returned. the #GstVideoFormat describing the FOURCC value a FOURCC value representing raw YUV video Find the #GstVideoFormat for the given parameters. a #GstVideoFormat or GST_VIDEO_FORMAT_UNKNOWN when the parameters to not specify a known format. the amount of bits used for a pixel the amount of bits used to store a pixel. This value is bigger than @depth the endianness of the masks, #G_LITTLE_ENDIAN or #G_BIG_ENDIAN the red mask the green mask the blue mask the alpha mask, or 0 if no alpha mask Convert the @format string to its #GstVideoFormat. the #GstVideoFormat for @format or GST_VIDEO_FORMAT_UNKNOWN when the string is not a known format. a format string Get the #GstVideoFormatInfo for @format The #GstVideoFormatInfo for @format. a #GstVideoFormat Get the default palette of @format. This the palette used in the pack function for paletted formats. the default palette of @format or %NULL when @format does not have a palette. a #GstVideoFormat size of the palette in bytes Converts a #GstVideoFormat value into the corresponding FOURCC. Only a few YUV formats have corresponding FOURCC values. If @format has no corresponding FOURCC value, 0 is returned. the FOURCC corresponding to @format a #GstVideoFormat video format Returns a string containing a descriptive name for the #GstVideoFormat. Since 1.26 this can also be used with %GST_VIDEO_FORMAT_UNKNOWN, previous versions were printing a critical warning and returned %NULL. the name corresponding to @format a #GstVideoFormat video format Return all the raw video formats supported by GStreamer including special opaque formats such as %GST_VIDEO_FORMAT_DMA_DRM for which no software conversion exists. This should be use for passthrough template cpas. an array of #GstVideoFormat the number of elements in the returned array Return all the raw video formats supported by GStreamer. an array of #GstVideoFormat the number of elements in the returned array Use @info and @buffer to fill in the values of @frame. @frame is usually allocated on the stack, and you will pass the address to the #GstVideoFrame structure allocated on the stack; gst_video_frame_map() will then fill in the structures with the various video-specific information you need to access the pixels of the video buffer. You can then use accessor macros such as GST_VIDEO_FRAME_COMP_DATA(), GST_VIDEO_FRAME_PLANE_DATA(), GST_VIDEO_FRAME_COMP_STRIDE(), GST_VIDEO_FRAME_PLANE_STRIDE() etc. to get to the pixels. |[<!-- language="C" --> GstVideoFrame vframe; ... // set RGB pixels to black one at a time if (gst_video_frame_map (&vframe, video_info, video_buffer, GST_MAP_WRITE)) { guint8 *pixels = GST_VIDEO_FRAME_PLANE_DATA (vframe, 0); guint stride = GST_VIDEO_FRAME_PLANE_STRIDE (vframe, 0); guint pixel_stride = GST_VIDEO_FRAME_COMP_PSTRIDE (vframe, 0); for (h = 0; h < height; ++h) { for (w = 0; w < width; ++w) { guint8 *pixel = pixels + h * stride + w * pixel_stride; memset (pixel, 0, pixel_stride); } } gst_video_frame_unmap (&vframe); } ... ]| All video planes of @buffer will be mapped and the pointers will be set in @frame->data. The purpose of this function is to make it easy for you to get to the video pixels in a generic way, without you having to worry too much about details such as whether the video data is allocated in one contiguous memory chunk or multiple memory chunks (e.g. one for each plane); or if custom strides and custom plane offsets are used or not (as signalled by GstVideoMeta on each buffer). This function will just fill the #GstVideoFrame structure with the right values and if you use the accessor macros everything will just work and you can access the data easily. It also maps the underlying memory chunks for you. %TRUE on success. pointer to #GstVideoFrame a #GstVideoInfo the buffer to map #GstMapFlags Use @info and @buffer to fill in the values of @frame with the video frame information of frame @id. When @id is -1, the default frame is mapped. When @id != -1, this function will return %FALSE when there is no GstVideoMeta with that id. All video planes of @buffer will be mapped and the pointers will be set in @frame->data. %TRUE on success. pointer to #GstVideoFrame a #GstVideoInfo the buffer to map the frame id to map #GstMapFlags Given the nominal duration of one video frame, this function will check some standard framerates for a close match (within 0.1%) and return one if possible, It will calculate an arbitrary framerate if no close match was found, and return %FALSE. It returns %FALSE if a duration of 0 is passed. %TRUE if a close "standard" framerate was recognised, and %FALSE otherwise. Nominal duration of one frame Numerator of the calculated framerate Denominator of the calculated framerate Parse @caps and update @info. Please note that the @caps should be a dma drm caps. The gst_video_is_dma_drm_caps() can be used to verify it before calling this function. TRUE if @caps could be parsed #GstVideoInfoDmaDrm a #GstCaps Fills @drm_info if @info's format has a valid drm format and @modifier is also valid %TRUE if @drm_info is filled correctly. #GstVideoInfoDmaDrm a #GstVideoInfo the associated modifier value. Initialize @drm_info with default values. a #GstVideoInfoDmaDrm Parse @caps and update @info. TRUE if @caps could be parsed #GstVideoInfo a #GstCaps Initialize @info with default values. a #GstVideoInfo Convert @mode to a #GstVideoInterlaceMode the #GstVideoInterlaceMode of @mode or #GST_VIDEO_INTERLACE_MODE_PROGRESSIVE when @mode is not a valid string representation for a #GstVideoInterlaceMode. a mode Convert @mode to its string representation. @mode as a string. a #GstVideoInterlaceMode Given a frame's dimensions and pixel aspect ratio, this function will calculate the frame's aspect ratio and compare it against a set of common well-known "standard" aspect ratios. %TRUE if a known "standard" aspect ratio was recognised, and %FALSE otherwise. Width of the video frame Height of the video frame Pixel aspect ratio numerator Pixel aspect ratio denominator Check whether the @caps is a dma drm kind caps. Please note that the caps should be fixed. %TRUE if the caps is a dma drm caps. a #GstCaps Return a generic raw video caps for formats defined in @formats. If @formats is %NULL returns a caps for all the supported raw video formats, see gst_video_formats_raw(). a video @GstCaps an array of raw #GstVideoFormat, or %NULL the size of @formats Return a generic raw video caps for formats defined in @formats with features @features. If @formats is %NULL returns a caps for all the supported video formats, see gst_video_formats_raw(). a video @GstCaps an array of raw #GstVideoFormat, or %NULL the size of @formats the #GstCapsFeatures to set on the caps Extract #GstVideoMasteringDisplayInfo from @mastering %TRUE if @minfo was filled with @mastering a #GstVideoMasteringDisplayInfo a #GstStructure representing #GstVideoMasteringDisplayInfo Get the #GQuark for the "gst-video-scale" metadata transform operation. a #GQuark A const #GValue containing a list of stereo video modes Utility function that returns a #GValue with a GstList of packed stereo video modes with double the height of a single view for use in caps negotiations. Currently this is top-bottom and row-interleaved. A const #GValue containing a list of stereo video modes Utility function that returns a #GValue with a GstList of packed stereo video modes that have double the width/height of a single view for use in caps negotiation. Currently this is just 'checkerboard' layout. A const #GValue containing a list of stereo video modes Utility function that returns a #GValue with a GstList of packed stereo video modes with double the width of a single view for use in caps negotiations. Currently this is side-by-side, side-by-side-quincunx and column-interleaved. A const #GValue containing a list of mono video modes Utility function that returns a #GValue with a GstList of mono video modes (mono/left/right) for use in caps negotiations. A const #GValue containing a list of 'unpacked' stereo video modes Utility function that returns a #GValue with a GstList of unpacked stereo video modes (separated/frame-by-frame/frame-by-frame-multiview) for use in caps negotiations. A boolean indicating whether the #GST_VIDEO_MULTIVIEW_FLAGS_HALF_ASPECT flag should be set. Utility function that heuristically guess whether a frame-packed stereoscopic video contains half width/height encoded views, or full-frame views by looking at the overall display aspect ratio. A #GstVideoMultiviewMode Video frame width in pixels Video frame height in pixels Numerator of the video pixel-aspect-ratio Denominator of the video pixel-aspect-ratio The #GstVideoMultiviewMode value Given a string from a caps multiview-mode field, output the corresponding #GstVideoMultiviewMode or #GST_VIDEO_MULTIVIEW_MODE_NONE multiview-mode field string from caps Given a #GstVideoMultiviewMode returns the multiview-mode caps string for insertion into a caps structure The caps string representation of the mode, or NULL if invalid. A #GstVideoMultiviewMode value Utility function that transforms the width/height/PAR and multiview mode and flags of a #GstVideoInfo into the requested mode. A #GstVideoInfo structure to operate on A #GstVideoMultiviewMode value A set of #GstVideoMultiviewFlags Parses the "image-orientation" tag and transforms it into the #GstVideoOrientationMethod enum. TRUE if there was a valid "image-orientation" tag in the taglist. A #GstTagList The location where to return the orientation. This helper shall be used by classes implementing the #GstVideoOverlay interface that want the render rectangle to be controllable using properties. This helper will install "render-rectangle" property into the class. The class on which the properties will be installed The first free property ID to use This helper shall be used by classes implementing the #GstVideoOverlay interface that want the render rectangle to be controllable using properties. This helper will parse and set the render rectangle calling gst_video_overlay_set_render_rectangle(). %TRUE if the @property_id matches the GstVideoOverlay property The instance on which the property is set The highest property ID. The property ID The #GValue to be set Make a new @method video scaler. @in_size source lines/pixels will be scaled to @out_size destination lines/pixels. @n_taps specifies the amount of pixels to use from the source for one output pixel. If n_taps is 0, this function chooses a good value automatically based on the @method and @in_size/@out_size. a #GstVideoScaler a #GstVideoResamplerMethod #GstVideoScalerFlags number of taps to use number of source elements number of destination elements extra options #GType for the #GstVideoSEIUserDataUnregisteredMeta structure. #GstMetaInfo pointer that describes #GstVideoSEIUserDataUnregisteredMeta. Parses and returns the Precision Time Stamp (ST 0604) from the SEI User Data Unregistered buffer True if data is a Precision Time Stamp and it was parsed correctly a #GstVideoSEIUserDataUnregisteredMeta User Data Unregistered UUID The parsed Precision Time Stamp SEI Get the tile index of the tile at coordinates @x and @y in the tiled image of @x_tiles by @y_tiles. Use this method when @mode is of type %GST_VIDEO_TILE_TYPE_INDEXED. the index of the tile at @x and @y in the tiled image of @x_tiles by @y_tiles. a #GstVideoTileMode x coordinate y coordinate number of horizintal tiles number of vertical tiles Convert @val to its gamma decoded value. This is the inverse operation of gst_video_color_transfer_encode(). For a non-linear value L' in the range [0..1], conversion to the linear L is in general performed with a power function like: |[ L = L' ^ gamma ]| Depending on @func, different formulas might be applied. Some formulas encode a linear segment in the lower range. the gamma decoded value of @val a #GstVideoTransferFunction a value Convert @val to its gamma encoded value. For a linear value L in the range [0..1], conversion to the non-linear (gamma encoded) L' is in general performed with a power function like: |[ L' = L ^ (1 / gamma) ]| Depending on @func, different formulas might be applied. Some formulas encode a linear segment in the lower range. the gamma encoded value of @val a #GstVideoTransferFunction a value Converts the @value to the #GstVideoTransferFunction The transfer characteristics (TransferCharacteristics) value is defined by "ISO/IEC 23001-8 Section 7.2 Table 3" and "ITU-T H.273 Table 3". "H.264 Table E-4" and "H.265 Table E.4" share the identical values. the matched #GstVideoTransferFunction a ITU-T H.273 transfer characteristics value Returns whether @from_func and @to_func are equivalent. There are cases (e.g. BT601, BT709, and BT2020_10) where several functions are functionally identical. In these cases, when doing conversion, we should consider them as equivalent. Also, BT2020_12 is the same as the aforementioned three for less than 12 bits per pixel. TRUE if @from_func and @to_func can be considered equivalent. #GstVideoTransferFunction to convert from bits per pixel to convert from #GstVideoTransferFunction to convert into bits per pixel to convert into Converts #GstVideoTransferFunction to the "transfer characteristics" (TransferCharacteristics) value defined by "ISO/IEC 23001-8 Section 7.2 Table 3" and "ITU-T H.273 Table 3". "H.264 Table E-4" and "H.265 Table E.4" share the identical values. The value of ISO/IEC 23001-8 transfer characteristics. a #GstVideoTransferFunction This object is used to convert video frames from one format to another. The object can perform conversion of: * video format * video colorspace * chroma-siting * video size