Synchronisation --------------- This document outlines the techniques used for doing synchronised playback of multiple streams. Synchronisation in a GstPipeline is achieved using the following 3 components: - a GstClock, which is global for all elements in a GstPipeline. - Timestamps on a GstBuffer. - the NEW_SEGMENT event preceding the buffers. A GstClock ---------- This object provides a counter that represents the current time in nanoseconds. This value is called the absolute_time. Different sources exist for this counter: - the system time (with g_get_current_time() and with microsecond accuracy) - an audio device (based on number of samples played) - a network source based on packets received + timestamps in those packets (a typical example is an RTP source) - ... In GStreamer any element can provide a GstClock object that can be used in the pipeline. The GstPipeline object will select a clock from all the providers and will distribute it to all other elements (see part-gstpipeline.txt). A GstClock always counts time upwards and does not necessarily start at 0. Running time ------------ After a pipeline selected a clock it will maintain the running_time based on the selected clock. This running_time represents the total time spent in the PLAYING state and is calculated as follows: - If the pipeline is NULL/READY, the running_time is undefined. - In PAUSED, the running_time remains at the time when it was last PAUSED. When the stream is PAUSED for the first time, the running_time is 0. - In PLAYING, the running_time is the delta between the absolute_time and the base time. The base time is defined as the absolute_time minus the running_time at the time when the pipeline is set to PLAYING. - after a flushing seek, the running_time is set to 0 (see part-seeking.txt). This is accomplished by redistributing a new base_time to the elements that got flushed. This algorithm captures the running_time when the pipeline is set from PLAYING to PAUSED and restores this time based on the current absolute_time when going back to PLAYING. This allows for both clocks that progress when in the PAUSED state (systemclock) and clocks that don't (audioclock). The clock and pipeline now provides a running_time to all elements that want to perform synchronisation. Indeed, the running time can be observed in each element (during the PLAYING state) as: C.running_time = absolute_time - base_time We note C.running_time as the running_time obtained by looking at the clock. This value is monotonically increasing at the rate of the clock. Timestamps ---------- The GstBuffer timestamps and the preceeding NEW_SEGMENT event (See part-streams.txt) define a transformation of the buffer timestamps to running_time as follows: The following notation is used: B: GstBuffer - B.timestamp = buffer timestamp (GST_BUFFER_TIMESTAMP) NS: NEWSEGMENT event preceeding the buffers. - NS.start: start field in the NEWSEGMENT event - NS.stop: stop field in the NEWSEGMENT event - NS.rate: rate field of NEWSEGMENT event - NS.abs_rate: absolute value of rate field of NEWSEGMENT event - NS.time: time field in the NEWSEGMENT event - NS.accum: total accumulated time of all previous NEWSEGMENT events. This field is kept in the GstSegment structure. Valid buffers for synchronisation are those with B.timestamp between NS.start and NS.stop. All other buffers outside this range should be dropped or clipped to these boundaries (see also part-segments.txt). The following transformation to running_time exist: if (NS.rate > 0.0) B.running_time = (B.timestamp - NS.start) / NS.abs_rate + NS.accum else B.running_time = (NS.stop - B.timestamp) / NS.abs_rate + NS.accum We write B.running_time as the running_time obtained from the NEWSEGMENT event and the buffers of that segment. The first displayable buffer will yield a value of 0 (since B.timestamp == NS.start and NS.accum == 0). For NS.rate > 1.0, the timestamps will be scaled down to increase the playback rate. Likewise, a rate between 0.0 and 1.0 will slow down playback. For negative rates, timestamps are received stop NS.stop to NS.start so that the first buffer received will be transformed into B.running_time of 0 (B.timestamp == NS.stop and NS.accum == 0). Synchronisation --------------- As we have seen, we can get a running_time: - using the clock and the element's base_time with: C.running_time = absolute_time - base_time - using the buffer timestamp and the preceeding NEWSEGMENT event as (assuming positive playback rate): B.running_time = (B.timestamp - NS.start) / NS.abs_rate + NS.accum We prefix C. and B. before the two running times to note how they were calculated. The task of synchronized playback is to make sure that we play a buffer with B.running_time at the moment when the clock reaches the same C.running_time. Thus the following must hold: B.running_time = C.running_time expaning: B.running_time = absolute_time - base_time or: absolute_time = B.running_time + base_time The absolute_time when a buffer with B.running_time should be played is noted with B.sync_time. Thus: B.sync_time = B.running_time + base_time One then waits for the clock to reach B.sync_time before rendering the buffer in the sink (See also part-clocks.txt). For multiple streams this means that buffers with the same running_time are to be displayed at the same time. A demuxer must make sure that the NEWSEGMENT it emits on its output pads yield the same running_time for buffers that should be played synchronized. This usually means sending the same NEWSEGMENT on all pads and making sure that the synchronized buffers have the same timestamps. Stream time ----------- The stream time is also known as the position in the stream and is a value between 0 and the total duration of the media file. It is the stream time that is used for: - report the POSITION query in the pipeline - the position used in seek events/queries - the position used to synchronize controller values Stream time is calculated using the buffer times and the preceeding NEWSEGMENT event as follows: stream_time = (B.timestamp - NS.start) * NS.abs_applied_rate + NS.time For negative rates, B.timestamp will go backwards from NS.stop to NS.start, making the stream time go backwards. Note that the stream time is never used for synchronisation against the clock.