/* GStreamer * Copyright (C) 1999,2000 Erik Walthinsen * 2001 Thomas * 2005,2006 Wim Taymans * * adder.c: Adder element, N in, one out, samples are added * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Library General Public * License as published by the Free Software Foundation; either * version 2 of the License, or (at your option) any later version. * * This library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * Library General Public License for more details. * * You should have received a copy of the GNU Library General Public * License along with this library; if not, write to the * Free Software Foundation, Inc., 59 Temple Place - Suite 330, * Boston, MA 02111-1307, USA. */ /** * SECTION:element-adder * * The adder allows to mix several streams into one by adding the data. * Mixed data is clamped to the min/max values of the data format. * * The adder currently mixes all data received on the sinkpads as soon as * possible without trying to synchronize the streams. * * * Example launch line * |[ * gst-launch audiotestsrc freq=100 ! adder name=mix ! audioconvert ! alsasink audiotestsrc freq=500 ! mix. * ]| This pipeline produces two sine waves mixed together. * * * Last reviewed on 2006-05-09 (0.10.7) */ /* Element-Checklist-Version: 5 */ #ifdef HAVE_CONFIG_H #include "config.h" #endif #include "gstadder.h" #include #include /* strcmp */ #include "gstadderorc.h" /* highest positive/lowest negative x-bit value we can use for clamping */ #define MAX_INT_32 ((gint32) (0x7fffffff)) #define MAX_INT_16 ((gint16) (0x7fff)) #define MAX_INT_8 ((gint8) (0x7f)) #define MAX_UINT_32 ((guint32)(0xffffffff)) #define MAX_UINT_16 ((guint16)(0xffff)) #define MAX_UINT_8 ((guint8) (0xff)) #define MIN_INT_32 ((gint32) (0x80000000)) #define MIN_INT_16 ((gint16) (0x8000)) #define MIN_INT_8 ((gint8) (0x80)) #define MIN_UINT_32 ((guint32)(0x00000000)) #define MIN_UINT_16 ((guint16)(0x0000)) #define MIN_UINT_8 ((guint8) (0x00)) enum { PROP_0, PROP_FILTER_CAPS }; #define GST_CAT_DEFAULT gst_adder_debug GST_DEBUG_CATEGORY_STATIC (GST_CAT_DEFAULT); /* elementfactory information */ #define CAPS \ "audio/x-raw-int, " \ "rate = (int) [ 1, MAX ], " \ "channels = (int) [ 1, MAX ], " \ "endianness = (int) BYTE_ORDER, " \ "width = (int) 32, " \ "depth = (int) 32, " \ "signed = (boolean) { true, false } ;" \ "audio/x-raw-int, " \ "rate = (int) [ 1, MAX ], " \ "channels = (int) [ 1, MAX ], " \ "endianness = (int) BYTE_ORDER, " \ "width = (int) 16, " \ "depth = (int) 16, " \ "signed = (boolean) { true, false } ;" \ "audio/x-raw-int, " \ "rate = (int) [ 1, MAX ], " \ "channels = (int) [ 1, MAX ], " \ "endianness = (int) BYTE_ORDER, " \ "width = (int) 8, " \ "depth = (int) 8, " \ "signed = (boolean) { true, false } ;" \ "audio/x-raw-float, " \ "rate = (int) [ 1, MAX ], " \ "channels = (int) [ 1, MAX ], " \ "endianness = (int) BYTE_ORDER, " \ "width = (int) { 32, 64 }" static GstStaticPadTemplate gst_adder_src_template = GST_STATIC_PAD_TEMPLATE ("src", GST_PAD_SRC, GST_PAD_ALWAYS, GST_STATIC_CAPS (CAPS) ); static GstStaticPadTemplate gst_adder_sink_template = GST_STATIC_PAD_TEMPLATE ("sink%d", GST_PAD_SINK, GST_PAD_REQUEST, GST_STATIC_CAPS (CAPS) ); GST_BOILERPLATE (GstAdder, gst_adder, GstElement, GST_TYPE_ELEMENT); static void gst_adder_dispose (GObject * object); static void gst_adder_set_property (GObject * object, guint prop_id, const GValue * value, GParamSpec * pspec); static void gst_adder_get_property (GObject * object, guint prop_id, GValue * value, GParamSpec * pspec); static gboolean gst_adder_setcaps (GstPad * pad, GstCaps * caps); static gboolean gst_adder_query (GstPad * pad, GstQuery * query); static gboolean gst_adder_src_event (GstPad * pad, GstEvent * event); static gboolean gst_adder_sink_event (GstPad * pad, GstEvent * event); static GstPad *gst_adder_request_new_pad (GstElement * element, GstPadTemplate * temp, const gchar * unused); static void gst_adder_release_pad (GstElement * element, GstPad * pad); static GstStateChangeReturn gst_adder_change_state (GstElement * element, GstStateChange transition); static GstBuffer *gst_adder_do_clip (GstCollectPads * pads, GstCollectData * data, GstBuffer * buffer, gpointer user_data); static GstFlowReturn gst_adder_collected (GstCollectPads * pads, gpointer user_data); /* non-clipping versions (for float) */ #define MAKE_FUNC_NC(name,type) \ static void name (type *out, type *in, gint samples) { \ gint i; \ for (i = 0; i < samples; i++) \ out[i] += in[i]; \ } /* *INDENT-OFF* */ MAKE_FUNC_NC (add_float64, gdouble) /* *INDENT-ON* */ /* we can only accept caps that we and downstream can handle. * if we have filtercaps set, use those to constrain the target caps. */ static GstCaps * gst_adder_sink_getcaps (GstPad * pad) { GstAdder *adder; GstCaps *result, *peercaps, *sinkcaps, *filter_caps; adder = GST_ADDER (GST_PAD_PARENT (pad)); GST_OBJECT_LOCK (adder); /* take filter */ if ((filter_caps = adder->filter_caps)) gst_caps_ref (filter_caps); GST_OBJECT_UNLOCK (adder); /* get the downstream possible caps */ peercaps = gst_pad_peer_get_caps (adder->srcpad); /* get the allowed caps on this sinkpad, we use the fixed caps function so * that it does not call recursively in this function. */ sinkcaps = gst_pad_get_fixed_caps_func (pad); if (peercaps) { /* restrict with filter-caps if any */ if (filter_caps) { GST_DEBUG_OBJECT (adder, "filtering peer caps"); result = gst_caps_intersect (peercaps, filter_caps); gst_caps_unref (peercaps); peercaps = result; } /* if the peer has caps, intersect */ GST_DEBUG_OBJECT (adder, "intersecting peer and template caps"); result = gst_caps_intersect (peercaps, sinkcaps); gst_caps_unref (peercaps); gst_caps_unref (sinkcaps); } else { /* the peer has no caps (or there is no peer), just use the allowed caps * of this sinkpad. */ /* restrict with filter-caps if any */ if (filter_caps) { GST_DEBUG_OBJECT (adder, "no peer caps, using filtered sinkcaps"); result = gst_caps_intersect (sinkcaps, filter_caps); gst_caps_unref (sinkcaps); } else { GST_DEBUG_OBJECT (adder, "no peer caps, using sinkcaps"); result = sinkcaps; } } if (filter_caps) gst_caps_unref (filter_caps); GST_LOG_OBJECT (adder, "getting caps on pad %p,%s to %" GST_PTR_FORMAT, pad, GST_PAD_NAME (pad), result); return result; } /* the first caps we receive on any of the sinkpads will define the caps for all * the other sinkpads because we can only mix streams with the same caps. */ static gboolean gst_adder_setcaps (GstPad * pad, GstCaps * caps) { GstAdder *adder; GList *pads; GstStructure *structure; const char *media_type; adder = GST_ADDER (GST_PAD_PARENT (pad)); GST_LOG_OBJECT (adder, "setting caps on pad %p,%s to %" GST_PTR_FORMAT, pad, GST_PAD_NAME (pad), caps); /* FIXME, see if the other pads can accept the format. Also lock the * format on the other pads to this new format. */ GST_OBJECT_LOCK (adder); pads = GST_ELEMENT (adder)->pads; while (pads) { GstPad *otherpad = GST_PAD (pads->data); if (otherpad != pad) { gst_caps_replace (&GST_PAD_CAPS (otherpad), caps); } pads = g_list_next (pads); } GST_OBJECT_UNLOCK (adder); /* parse caps now */ structure = gst_caps_get_structure (caps, 0); media_type = gst_structure_get_name (structure); if (strcmp (media_type, "audio/x-raw-int") == 0) { adder->format = GST_ADDER_FORMAT_INT; gst_structure_get_int (structure, "width", &adder->width); gst_structure_get_int (structure, "depth", &adder->depth); gst_structure_get_int (structure, "endianness", &adder->endianness); gst_structure_get_boolean (structure, "signed", &adder->is_signed); GST_INFO_OBJECT (pad, "parse_caps sets adder to format int, %d bit", adder->width); if (adder->endianness != G_BYTE_ORDER) goto not_supported; switch (adder->width) { case 8: adder->func = (adder->is_signed ? (GstAdderFunction) add_int8 : (GstAdderFunction) add_uint8); adder->sample_size = 1; break; case 16: adder->func = (adder->is_signed ? (GstAdderFunction) add_int16 : (GstAdderFunction) add_uint16); adder->sample_size = 2; break; case 32: adder->func = (adder->is_signed ? (GstAdderFunction) add_int32 : (GstAdderFunction) add_uint32); adder->sample_size = 4; break; default: goto not_supported; } } else if (strcmp (media_type, "audio/x-raw-float") == 0) { adder->format = GST_ADDER_FORMAT_FLOAT; gst_structure_get_int (structure, "width", &adder->width); gst_structure_get_int (structure, "endianness", &adder->endianness); GST_INFO_OBJECT (pad, "parse_caps sets adder to format float, %d bit", adder->width); if (adder->endianness != G_BYTE_ORDER) goto not_supported; switch (adder->width) { case 32: adder->func = (GstAdderFunction) add_float32; adder->sample_size = 4; break; case 64: adder->func = (GstAdderFunction) add_float64; adder->sample_size = 8; break; default: goto not_supported; } } else { goto not_supported; } gst_structure_get_int (structure, "channels", &adder->channels); gst_structure_get_int (structure, "rate", &adder->rate); /* precalc bps */ adder->bps = (adder->width / 8) * adder->channels; return TRUE; /* ERRORS */ not_supported: { GST_DEBUG_OBJECT (adder, "unsupported format set as caps"); return FALSE; } } /* FIXME, the duration query should reflect how long you will produce * data, that is the amount of stream time until you will emit EOS. * * For synchronized mixing this is always the max of all the durations * of upstream since we emit EOS when all of them finished. * * We don't do synchronized mixing so this really depends on where the * streams where punched in and what their relative offsets are against * eachother which we can get from the first timestamps we see. * * When we add a new stream (or remove a stream) the duration might * also become invalid again and we need to post a new DURATION * message to notify this fact to the parent. * For now we take the max of all the upstream elements so the simple * cases work at least somewhat. */ static gboolean gst_adder_query_duration (GstAdder * adder, GstQuery * query) { gint64 max; gboolean res; GstFormat format; GstIterator *it; gboolean done; /* parse format */ gst_query_parse_duration (query, &format, NULL); max = -1; res = TRUE; done = FALSE; it = gst_element_iterate_sink_pads (GST_ELEMENT_CAST (adder)); while (!done) { GstIteratorResult ires; gpointer item; ires = gst_iterator_next (it, &item); switch (ires) { case GST_ITERATOR_DONE: done = TRUE; break; case GST_ITERATOR_OK: { GstPad *pad = GST_PAD_CAST (item); gint64 duration; /* ask sink peer for duration */ res &= gst_pad_query_peer_duration (pad, &format, &duration); /* take max from all valid return values */ if (res) { /* valid unknown length, stop searching */ if (duration == -1) { max = duration; done = TRUE; } /* else see if bigger than current max */ else if (duration > max) max = duration; } gst_object_unref (pad); break; } case GST_ITERATOR_RESYNC: max = -1; res = TRUE; gst_iterator_resync (it); break; default: res = FALSE; done = TRUE; break; } } gst_iterator_free (it); if (res) { /* and store the max */ GST_DEBUG_OBJECT (adder, "Total duration in format %s: %" GST_TIME_FORMAT, gst_format_get_name (format), GST_TIME_ARGS (max)); gst_query_set_duration (query, format, max); } return res; } static gboolean gst_adder_query_latency (GstAdder * adder, GstQuery * query) { GstClockTime min, max; gboolean live; gboolean res; GstIterator *it; gboolean done; res = TRUE; done = FALSE; live = FALSE; min = 0; max = GST_CLOCK_TIME_NONE; /* Take maximum of all latency values */ it = gst_element_iterate_sink_pads (GST_ELEMENT_CAST (adder)); while (!done) { GstIteratorResult ires; gpointer item; ires = gst_iterator_next (it, &item); switch (ires) { case GST_ITERATOR_DONE: done = TRUE; break; case GST_ITERATOR_OK: { GstPad *pad = GST_PAD_CAST (item); GstQuery *peerquery; GstClockTime min_cur, max_cur; gboolean live_cur; peerquery = gst_query_new_latency (); /* Ask peer for latency */ res &= gst_pad_peer_query (pad, peerquery); /* take max from all valid return values */ if (res) { gst_query_parse_latency (peerquery, &live_cur, &min_cur, &max_cur); if (min_cur > min) min = min_cur; if (max_cur != GST_CLOCK_TIME_NONE && ((max != GST_CLOCK_TIME_NONE && max_cur > max) || (max == GST_CLOCK_TIME_NONE))) max = max_cur; live = live || live_cur; } gst_query_unref (peerquery); gst_object_unref (pad); break; } case GST_ITERATOR_RESYNC: live = FALSE; min = 0; max = GST_CLOCK_TIME_NONE; res = TRUE; gst_iterator_resync (it); break; default: res = FALSE; done = TRUE; break; } } gst_iterator_free (it); if (res) { /* store the results */ GST_DEBUG_OBJECT (adder, "Calculated total latency: live %s, min %" GST_TIME_FORMAT ", max %" GST_TIME_FORMAT, (live ? "yes" : "no"), GST_TIME_ARGS (min), GST_TIME_ARGS (max)); gst_query_set_latency (query, live, min, max); } return res; } static gboolean gst_adder_query (GstPad * pad, GstQuery * query) { GstAdder *adder = GST_ADDER (gst_pad_get_parent (pad)); gboolean res = FALSE; switch (GST_QUERY_TYPE (query)) { case GST_QUERY_POSITION: { GstFormat format; gst_query_parse_position (query, &format, NULL); switch (format) { case GST_FORMAT_TIME: /* FIXME, bring to stream time, might be tricky */ gst_query_set_position (query, format, adder->timestamp); res = TRUE; break; case GST_FORMAT_DEFAULT: gst_query_set_position (query, format, adder->offset); res = TRUE; break; default: break; } break; } case GST_QUERY_DURATION: res = gst_adder_query_duration (adder, query); break; case GST_QUERY_LATENCY: res = gst_adder_query_latency (adder, query); break; default: /* FIXME, needs a custom query handler because we have multiple * sinkpads */ res = gst_pad_query_default (pad, query); break; } gst_object_unref (adder); return res; } typedef struct { GstEvent *event; gboolean flush; } EventData; static gboolean forward_event_func (GstPad * pad, GValue * ret, EventData * data) { GstEvent *event = data->event; gst_event_ref (event); GST_LOG_OBJECT (pad, "About to send event %s", GST_EVENT_TYPE_NAME (event)); if (!gst_pad_push_event (pad, event)) { GST_WARNING_OBJECT (pad, "Sending event %p (%s) failed.", event, GST_EVENT_TYPE_NAME (event)); /* quick hack to unflush the pads, ideally we need a way to just unflush * this single collect pad */ if (data->flush) gst_pad_send_event (pad, gst_event_new_flush_stop ()); } else { g_value_set_boolean (ret, TRUE); GST_LOG_OBJECT (pad, "Sent event %p (%s).", event, GST_EVENT_TYPE_NAME (event)); } gst_object_unref (pad); /* continue on other pads, even if one failed */ return TRUE; } /* forwards the event to all sinkpads, takes ownership of the * event * * Returns: TRUE if the event could be forwarded on all * sinkpads. */ static gboolean forward_event (GstAdder * adder, GstEvent * event, gboolean flush) { gboolean ret; GstIterator *it; GstIteratorResult ires; GValue vret = { 0 }; EventData data; GST_LOG_OBJECT (adder, "Forwarding event %p (%s)", event, GST_EVENT_TYPE_NAME (event)); data.event = event; data.flush = flush; g_value_init (&vret, G_TYPE_BOOLEAN); g_value_set_boolean (&vret, FALSE); it = gst_element_iterate_sink_pads (GST_ELEMENT_CAST (adder)); while (TRUE) { ires = gst_iterator_fold (it, (GstIteratorFoldFunction) forward_event_func, &vret, &data); switch (ires) { case GST_ITERATOR_RESYNC: GST_WARNING ("resync"); gst_iterator_resync (it); g_value_set_boolean (&vret, TRUE); break; case GST_ITERATOR_OK: case GST_ITERATOR_DONE: ret = g_value_get_boolean (&vret); goto done; default: ret = FALSE; goto done; } } done: gst_iterator_free (it); GST_LOG_OBJECT (adder, "Forwarded event %p (%s), ret=%d", event, GST_EVENT_TYPE_NAME (event), ret); gst_event_unref (event); return ret; } static gboolean gst_adder_src_event (GstPad * pad, GstEvent * event) { GstAdder *adder; gboolean result; adder = GST_ADDER (gst_pad_get_parent (pad)); switch (GST_EVENT_TYPE (event)) { case GST_EVENT_SEEK: { GstSeekFlags flags; GstSeekType curtype, endtype; gint64 cur, end; gboolean flush; /* parse the seek parameters */ gst_event_parse_seek (event, &adder->segment_rate, NULL, &flags, &curtype, &cur, &endtype, &end); if ((curtype != GST_SEEK_TYPE_NONE) && (curtype != GST_SEEK_TYPE_SET)) { result = FALSE; GST_DEBUG_OBJECT (adder, "seeking failed, unhandled seek type for start: %d", curtype); goto done; } if ((endtype != GST_SEEK_TYPE_NONE) && (endtype != GST_SEEK_TYPE_SET)) { result = FALSE; GST_DEBUG_OBJECT (adder, "seeking failed, unhandled seek type for end: %d", endtype); goto done; } flush = (flags & GST_SEEK_FLAG_FLUSH) == GST_SEEK_FLAG_FLUSH; /* check if we are flushing */ if (flush) { /* make sure we accept nothing anymore and return WRONG_STATE */ gst_collect_pads_set_flushing (adder->collect, TRUE); /* flushing seek, start flush downstream, the flush will be done * when all pads received a FLUSH_STOP. */ gst_pad_push_event (adder->srcpad, gst_event_new_flush_start ()); /* We can't send FLUSH_STOP here since upstream could start pushing data * after we unlock adder->collect. * We set flush_stop_pending to TRUE instead and send FLUSH_STOP after * forwarding the seek upstream or from gst_adder_collected, * whichever happens first. */ adder->flush_stop_pending = TRUE; } GST_DEBUG_OBJECT (adder, "handling seek event: %" GST_PTR_FORMAT, event); /* now wait for the collected to be finished and mark a new * segment. After we have the lock, no collect function is running and no * new collect function will be called for as long as we're flushing. */ GST_OBJECT_LOCK (adder->collect); if (curtype == GST_SEEK_TYPE_SET) adder->segment_start = cur; else adder->segment_start = 0; if (endtype == GST_SEEK_TYPE_SET) adder->segment_end = end; else adder->segment_end = GST_CLOCK_TIME_NONE; /* make sure we push a new segment, to inform about new basetime * see FIXME in gst_adder_collected() */ adder->segment_pending = TRUE; if (flush) { /* Yes, we need to call _set_flushing again *WHEN* the streaming threads * have stopped so that the cookie gets properly updated. */ gst_collect_pads_set_flushing (adder->collect, TRUE); } GST_OBJECT_UNLOCK (adder->collect); GST_DEBUG_OBJECT (adder, "forwarding seek event: %" GST_PTR_FORMAT, event); result = forward_event (adder, event, flush); if (!result) { /* seek failed. maybe source is a live source. */ GST_DEBUG_OBJECT (adder, "seeking failed"); } if (g_atomic_int_compare_and_exchange (&adder->flush_stop_pending, TRUE, FALSE)) { GST_DEBUG_OBJECT (adder, "pending flush stop"); gst_pad_push_event (adder->srcpad, gst_event_new_flush_stop ()); } break; } case GST_EVENT_QOS: /* QoS might be tricky */ result = FALSE; break; case GST_EVENT_NAVIGATION: /* navigation is rather pointless. */ result = FALSE; break; default: /* just forward the rest for now */ GST_DEBUG_OBJECT (adder, "forward unhandled event: %s", GST_EVENT_TYPE_NAME (event)); result = forward_event (adder, event, FALSE); break; } done: gst_object_unref (adder); return result; } static gboolean gst_adder_sink_event (GstPad * pad, GstEvent * event) { GstAdder *adder; gboolean ret = TRUE; adder = GST_ADDER (gst_pad_get_parent (pad)); GST_DEBUG ("Got %s event on pad %s:%s", GST_EVENT_TYPE_NAME (event), GST_DEBUG_PAD_NAME (pad)); switch (GST_EVENT_TYPE (event)) { case GST_EVENT_FLUSH_STOP: /* we received a flush-stop. The collect_event function will push the * event past our element. We simply forward all flush-stop events, even * when no flush-stop was pending, this is required because collectpads * does not provide an API to handle-but-not-forward the flush-stop. * We unset the pending flush-stop flag so that we don't send anymore * flush-stop from the collect function later. */ GST_OBJECT_LOCK (adder->collect); adder->segment_pending = TRUE; adder->flush_stop_pending = FALSE; /* Clear pending tags */ if (adder->pending_events) { g_list_foreach (adder->pending_events, (GFunc) gst_event_unref, NULL); g_list_free (adder->pending_events); adder->pending_events = NULL; } GST_OBJECT_UNLOCK (adder->collect); break; case GST_EVENT_TAG: GST_OBJECT_LOCK (adder->collect); /* collect tags here so we can push them out when we collect data */ adder->pending_events = g_list_append (adder->pending_events, event); GST_OBJECT_UNLOCK (adder->collect); goto beach; default: break; } /* now GstCollectPads can take care of the rest, e.g. EOS */ ret = adder->collect_event (pad, event); beach: gst_object_unref (adder); return ret; } static void gst_adder_base_init (gpointer g_class) { GstElementClass *gstelement_class = GST_ELEMENT_CLASS (g_class); gst_element_class_add_pad_template (gstelement_class, gst_static_pad_template_get (&gst_adder_src_template)); gst_element_class_add_pad_template (gstelement_class, gst_static_pad_template_get (&gst_adder_sink_template)); gst_element_class_set_details_simple (gstelement_class, "Adder", "Generic/Audio", "Add N audio channels together", "Thomas Vander Stichele "); } static void gst_adder_class_init (GstAdderClass * klass) { GObjectClass *gobject_class = (GObjectClass *) klass; GstElementClass *gstelement_class = (GstElementClass *) klass; gobject_class->set_property = gst_adder_set_property; gobject_class->get_property = gst_adder_get_property; gobject_class->dispose = gst_adder_dispose; /** * GstAdder:caps: * * Since: 0.10.24 */ g_object_class_install_property (gobject_class, PROP_FILTER_CAPS, g_param_spec_boxed ("caps", "Target caps", "Set target format for mixing (NULL means ANY). " "Setting this property takes a reference to the supplied GstCaps " "object.", GST_TYPE_CAPS, G_PARAM_READWRITE | G_PARAM_STATIC_STRINGS)); gstelement_class->request_new_pad = GST_DEBUG_FUNCPTR (gst_adder_request_new_pad); gstelement_class->release_pad = GST_DEBUG_FUNCPTR (gst_adder_release_pad); gstelement_class->change_state = GST_DEBUG_FUNCPTR (gst_adder_change_state); } static void gst_adder_init (GstAdder * adder, GstAdderClass * klass) { GstPadTemplate *template; template = gst_static_pad_template_get (&gst_adder_src_template); adder->srcpad = gst_pad_new_from_template (template, "src"); gst_object_unref (template); gst_pad_set_getcaps_function (adder->srcpad, GST_DEBUG_FUNCPTR (gst_pad_proxy_getcaps)); gst_pad_set_setcaps_function (adder->srcpad, GST_DEBUG_FUNCPTR (gst_adder_setcaps)); gst_pad_set_query_function (adder->srcpad, GST_DEBUG_FUNCPTR (gst_adder_query)); gst_pad_set_event_function (adder->srcpad, GST_DEBUG_FUNCPTR (gst_adder_src_event)); gst_element_add_pad (GST_ELEMENT (adder), adder->srcpad); adder->format = GST_ADDER_FORMAT_UNSET; adder->padcount = 0; adder->func = NULL; adder->filter_caps = NULL; /* keep track of the sinkpads requested */ adder->collect = gst_collect_pads_new (); gst_collect_pads_set_function (adder->collect, GST_DEBUG_FUNCPTR (gst_adder_collected), adder); gst_collect_pads_set_clip_function (adder->collect, GST_DEBUG_FUNCPTR (gst_adder_do_clip), adder); } static void gst_adder_dispose (GObject * object) { GstAdder *adder = GST_ADDER (object); if (adder->collect) { gst_object_unref (adder->collect); adder->collect = NULL; } gst_caps_replace (&adder->filter_caps, NULL); if (adder->pending_events) { g_list_foreach (adder->pending_events, (GFunc) gst_event_unref, NULL); g_list_free (adder->pending_events); adder->pending_events = NULL; } G_OBJECT_CLASS (parent_class)->dispose (object); } static void gst_adder_set_property (GObject * object, guint prop_id, const GValue * value, GParamSpec * pspec) { GstAdder *adder = GST_ADDER (object); switch (prop_id) { case PROP_FILTER_CAPS:{ GstCaps *new_caps = NULL; GstCaps *old_caps; const GstCaps *new_caps_val = gst_value_get_caps (value); if (new_caps_val != NULL) { new_caps = (GstCaps *) new_caps_val; gst_caps_ref (new_caps); } GST_OBJECT_LOCK (adder); old_caps = adder->filter_caps; adder->filter_caps = new_caps; GST_OBJECT_UNLOCK (adder); if (old_caps) gst_caps_unref (old_caps); GST_DEBUG_OBJECT (adder, "set new caps %" GST_PTR_FORMAT, new_caps); break; } default: G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec); break; } } static void gst_adder_get_property (GObject * object, guint prop_id, GValue * value, GParamSpec * pspec) { GstAdder *adder = GST_ADDER (object); switch (prop_id) { case PROP_FILTER_CAPS: GST_OBJECT_LOCK (adder); gst_value_set_caps (value, adder->filter_caps); GST_OBJECT_UNLOCK (adder); break; default: G_OBJECT_WARN_INVALID_PROPERTY_ID (object, prop_id, pspec); break; } } static GstPad * gst_adder_request_new_pad (GstElement * element, GstPadTemplate * templ, const gchar * unused) { gchar *name; GstAdder *adder; GstPad *newpad; gint padcount; if (templ->direction != GST_PAD_SINK) goto not_sink; adder = GST_ADDER (element); /* increment pad counter */ padcount = g_atomic_int_exchange_and_add (&adder->padcount, 1); name = g_strdup_printf ("sink%d", padcount); newpad = gst_pad_new_from_template (templ, name); GST_DEBUG_OBJECT (adder, "request new pad %s", name); g_free (name); gst_pad_set_getcaps_function (newpad, GST_DEBUG_FUNCPTR (gst_adder_sink_getcaps)); gst_pad_set_setcaps_function (newpad, GST_DEBUG_FUNCPTR (gst_adder_setcaps)); gst_collect_pads_add_pad (adder->collect, newpad, sizeof (GstCollectData)); /* FIXME: hacked way to override/extend the event function of * GstCollectPads; because it sets its own event function giving the * element no access to events */ adder->collect_event = (GstPadEventFunction) GST_PAD_EVENTFUNC (newpad); gst_pad_set_event_function (newpad, GST_DEBUG_FUNCPTR (gst_adder_sink_event)); /* takes ownership of the pad */ if (!gst_element_add_pad (GST_ELEMENT (adder), newpad)) goto could_not_add; return newpad; /* errors */ not_sink: { g_warning ("gstadder: request new pad that is not a SINK pad\n"); return NULL; } could_not_add: { GST_DEBUG_OBJECT (adder, "could not add pad"); gst_collect_pads_remove_pad (adder->collect, newpad); gst_object_unref (newpad); return NULL; } } static void gst_adder_release_pad (GstElement * element, GstPad * pad) { GstAdder *adder; adder = GST_ADDER (element); GST_DEBUG_OBJECT (adder, "release pad %s:%s", GST_DEBUG_PAD_NAME (pad)); gst_collect_pads_remove_pad (adder->collect, pad); gst_element_remove_pad (element, pad); } static GstBuffer * gst_adder_do_clip (GstCollectPads * pads, GstCollectData * data, GstBuffer * buffer, gpointer user_data) { GstAdder *adder = GST_ADDER (user_data); buffer = gst_audio_buffer_clip (buffer, &data->segment, adder->rate, adder->bps); return buffer; } static GstFlowReturn gst_adder_collected (GstCollectPads * pads, gpointer user_data) { /* * combine streams by adding data values * basic algorithm : * - this function is called when all pads have a buffer * - get available bytes on all pads. * - repeat for each input pad : * - read available bytes, copy or add to target buffer * - if there's an EOS event, remove the input channel * - push out the output buffer * * todo: * - would be nice to have a mixing mode, where instead of adding we mix * - for float we could downscale after collect loop * - for int we need to downscale each input to avoid clipping or * mix into a temp (float) buffer and scale afterwards as well */ GstAdder *adder; GSList *collected, *next = NULL; GstFlowReturn ret; GstBuffer *outbuf = NULL, *gapbuf = NULL; gpointer outdata = NULL; guint outsize; gint64 next_offset; gint64 next_timestamp; adder = GST_ADDER (user_data); /* this is fatal */ if (G_UNLIKELY (adder->func == NULL)) goto not_negotiated; if (g_atomic_int_compare_and_exchange (&adder->flush_stop_pending, TRUE, FALSE)) { GST_DEBUG_OBJECT (adder, "pending flush stop"); gst_pad_push_event (adder->srcpad, gst_event_new_flush_stop ()); } /* get available bytes for reading, this can be 0 which could mean empty * buffers or EOS, which we will catch when we loop over the pads. */ outsize = gst_collect_pads_available (pads); /* can only happen when no pads to collect or all EOS */ if (outsize == 0) goto eos; GST_LOG_OBJECT (adder, "starting to cycle through channels, %d bytes available (bps = %d)", outsize, adder->bps); for (collected = pads->data; collected; collected = next) { GstCollectData *collect_data; GstBuffer *inbuf; gboolean is_gap; /* take next to see if this is the last collectdata */ next = g_slist_next (collected); collect_data = (GstCollectData *) collected->data; /* get a buffer of size bytes, if we get a buffer, it is at least outsize * bytes big. */ inbuf = gst_collect_pads_take_buffer (pads, collect_data, outsize); /* NULL means EOS or an empty buffer so we still need to flush in * case of an empty buffer. */ if (inbuf == NULL) { GST_LOG_OBJECT (adder, "channel %p: no bytes available", collect_data); continue; } is_gap = GST_BUFFER_FLAG_IS_SET (inbuf, GST_BUFFER_FLAG_GAP); /* Try to make an output buffer */ if (outbuf == NULL) { /* if this is a gap buffer but we have some more pads to check, skip it. * If we are at the last buffer, take it, regardless if it is a GAP * buffer or not. */ if (is_gap && next) { GST_DEBUG_OBJECT (adder, "skipping, non-last GAP buffer"); /* we keep the GAP buffer, if we don't have anymore buffers (all pads * EOS, we can use this one as the output buffer. */ if (gapbuf == NULL) gapbuf = inbuf; else gst_buffer_unref (inbuf); continue; } GST_LOG_OBJECT (adder, "channel %p: preparing output buffer of %d bytes", collect_data, outsize); /* make data and metadata writable, can simply return the inbuf when we * are the only one referencing this buffer. If this is the last (and * only) GAP buffer, it will automatically copy the GAP flag. */ outbuf = gst_buffer_make_writable (inbuf); gst_buffer_set_caps (outbuf, GST_PAD_CAPS (adder->srcpad)); outdata = gst_buffer_map (outbuf, NULL, NULL, GST_MAP_WRITE); } else { if (!is_gap) { /* we had a previous output buffer, mix this non-GAP buffer */ guint8 *indata; gsize insize; indata = gst_buffer_map (inbuf, &insize, NULL, GST_MAP_READ); /* all buffers should have outsize, there are no short buffers because we * asked for the max size above */ g_assert (insize == outsize); GST_LOG_OBJECT (adder, "channel %p: mixing %d bytes from data %p", collect_data, insize, indata); /* further buffers, need to add them */ adder->func ((gpointer) outdata, (gpointer) indata, insize / adder->sample_size); gst_buffer_unmap (inbuf, indata, insize); } else { /* skip gap buffer */ GST_LOG_OBJECT (adder, "channel %p: skipping GAP buffer", collect_data); } gst_buffer_unref (inbuf); } } if (outbuf) gst_buffer_unmap (outbuf, outdata, outsize); if (outbuf == NULL) { /* no output buffer, reuse one of the GAP buffers then if we have one */ if (gapbuf) { GST_LOG_OBJECT (adder, "reusing GAP buffer %p", gapbuf); outbuf = gapbuf; } else /* assume EOS otherwise, this should not happen, really */ goto eos; } else if (gapbuf) /* we had an output buffer, unref the gapbuffer we kept */ gst_buffer_unref (gapbuf); if (adder->segment_pending) { GstEvent *event; /* FIXME, use rate/applied_rate as set on all sinkpads. * - currently we just set rate as received from last seek-event * * When seeking we set the start and stop positions as given in the seek * event. We also adjust offset & timestamp acordingly. * This basically ignores all newsegments sent by upstream. */ event = gst_event_new_new_segment_full (FALSE, adder->segment_rate, 1.0, GST_FORMAT_TIME, adder->segment_start, adder->segment_end, adder->segment_start); if (adder->segment_rate > 0.0) { adder->timestamp = adder->segment_start; } else { adder->timestamp = adder->segment_end; } adder->offset = gst_util_uint64_scale (adder->timestamp, adder->rate, GST_SECOND); GST_INFO_OBJECT (adder, "seg_start %" G_GUINT64_FORMAT ", seg_end %" G_GUINT64_FORMAT, adder->segment_start, adder->segment_end); GST_INFO_OBJECT (adder, "timestamp %" G_GINT64_FORMAT ",new offset %" G_GINT64_FORMAT, adder->timestamp, adder->offset); if (event) { if (!gst_pad_push_event (adder->srcpad, event)) { GST_WARNING_OBJECT (adder->srcpad, "Sending event %p (%s) failed.", event, GST_EVENT_TYPE_NAME (event)); } adder->segment_pending = FALSE; } else { GST_WARNING_OBJECT (adder->srcpad, "Creating new segment event for " "start:%" G_GINT64_FORMAT " end:%" G_GINT64_FORMAT " failed", adder->segment_start, adder->segment_end); } } if (G_UNLIKELY (adder->pending_events)) { GList *tmp = adder->pending_events; while (tmp) { GstEvent *ev = (GstEvent *) tmp->data; gst_pad_push_event (adder->srcpad, ev); tmp = g_list_next (tmp); } g_list_free (adder->pending_events); adder->pending_events = NULL; } /* for the next timestamp, use the sample counter, which will * never accumulate rounding errors */ if (adder->segment_rate > 0.0) { next_offset = adder->offset + outsize / adder->bps; } else { next_offset = adder->offset - outsize / adder->bps; } next_timestamp = gst_util_uint64_scale (next_offset, GST_SECOND, adder->rate); /* set timestamps on the output buffer */ if (adder->segment_rate > 0.0) { GST_BUFFER_TIMESTAMP (outbuf) = adder->timestamp; GST_BUFFER_OFFSET (outbuf) = adder->offset; GST_BUFFER_OFFSET_END (outbuf) = next_offset; GST_BUFFER_DURATION (outbuf) = next_timestamp - adder->timestamp; } else { GST_BUFFER_TIMESTAMP (outbuf) = next_timestamp; GST_BUFFER_OFFSET (outbuf) = next_offset; GST_BUFFER_OFFSET_END (outbuf) = adder->offset; GST_BUFFER_DURATION (outbuf) = adder->timestamp - next_timestamp; } adder->offset = next_offset; adder->timestamp = next_timestamp; /* send it out */ GST_LOG_OBJECT (adder, "pushing outbuf %p, timestamp %" GST_TIME_FORMAT " offset %" G_GINT64_FORMAT, outbuf, GST_TIME_ARGS (GST_BUFFER_TIMESTAMP (outbuf)), GST_BUFFER_OFFSET (outbuf)); ret = gst_pad_push (adder->srcpad, outbuf); GST_LOG_OBJECT (adder, "pushed outbuf, result = %s", gst_flow_get_name (ret)); return ret; /* ERRORS */ not_negotiated: { GST_ELEMENT_ERROR (adder, STREAM, FORMAT, (NULL), ("Unknown data received, not negotiated")); return GST_FLOW_NOT_NEGOTIATED; } eos: { GST_DEBUG_OBJECT (adder, "no data available, must be EOS"); gst_pad_push_event (adder->srcpad, gst_event_new_eos ()); return GST_FLOW_UNEXPECTED; } } static GstStateChangeReturn gst_adder_change_state (GstElement * element, GstStateChange transition) { GstAdder *adder; GstStateChangeReturn ret; adder = GST_ADDER (element); switch (transition) { case GST_STATE_CHANGE_NULL_TO_READY: break; case GST_STATE_CHANGE_READY_TO_PAUSED: adder->timestamp = 0; adder->offset = 0; adder->flush_stop_pending = FALSE; adder->segment_pending = TRUE; adder->segment_start = 0; adder->segment_end = GST_CLOCK_TIME_NONE; adder->segment_rate = 1.0; gst_segment_init (&adder->segment, GST_FORMAT_UNDEFINED); gst_collect_pads_start (adder->collect); break; case GST_STATE_CHANGE_PAUSED_TO_PLAYING: break; case GST_STATE_CHANGE_PAUSED_TO_READY: /* need to unblock the collectpads before calling the * parent change_state so that streaming can finish */ gst_collect_pads_stop (adder->collect); break; default: break; } ret = GST_ELEMENT_CLASS (parent_class)->change_state (element, transition); switch (transition) { default: break; } return ret; } static gboolean plugin_init (GstPlugin * plugin) { GST_DEBUG_CATEGORY_INIT (GST_CAT_DEFAULT, "adder", 0, "audio channel mixing element"); gst_adder_orc_init (); if (!gst_element_register (plugin, "adder", GST_RANK_NONE, GST_TYPE_ADDER)) { return FALSE; } return TRUE; } GST_PLUGIN_DEFINE (GST_VERSION_MAJOR, GST_VERSION_MINOR, "adder", "Adds multiple streams", plugin_init, VERSION, "LGPL", GST_PACKAGE_NAME, GST_PACKAGE_ORIGIN)