/* GStreamer
 * Copyright (C) <1999> Erik Walthinsen <omega@cse.ogi.edu>
 * Copyright (C) 2005-2012 David Schleef <ds@schleef.org>
 * Copyright (C) <2019> Seungha Yang <seungha.yang@navercorp.com>
 *
 * This library is free software; you can redistribute it and/or
 * modify it under the terms of the GNU Library General Public
 * License as published by the Free Software Foundation; either
 * version 2 of the License, or (at your option) any later version.
 *
 * This library is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
 * Library General Public License for more details.
 *
 * You should have received a copy of the GNU Library General Public
 * License along with this library; if not, write to the
 * Free Software Foundation, Inc., 51 Franklin St, Fifth Floor,
 * Boston, MA 02110-1301, USA.
 */

/**
 * SECTION:element-cudascale
 * @title: cudascale
 * @see_also: cudaconvert
 *
 * This element resizes video frames. By default the element will try to
 * negotiate to the same size on the source and sinkpad so that no scaling
 * is needed. It is therefore safe to insert this element in a pipeline to
 * get more robust behaviour without any cost if no scaling is needed.
 *
 * This element supports some YUV formats which are are also supported by
 * nvidia encoders and decoders.
 *
 * ## Example pipelines
 * |[
 * gst-launch-1.0 -v filesrc location=videotestsrc.mp4 ! qtdemux ! h264parse ! nvh264dec ! cudaconvert ! cudascale ! cudaconvert ! cudadownload ! autovideosink
 * ]|
 *  Decode a mp4/h264 and display the video. If the video sink chosen
 * cannot perform scaling, the video scaling will be performed by cudascale
 * |[
 * gst-launch-1.0 -v filesrc location=videotestsrc.mp4 ! qtdemux ! h264parse ! nvh264dec ! cudaconvert ! cudascale ! cudaconvert ! cudadownload ! video/x-raw,width=100 ! autovideosink
 * ]|
 *  Decode an mp4/h264 and display the video with a width of 100.
 *
 * Since: 1.20
 */

#ifdef HAVE_CONFIG_H
#  include <config.h>
#endif

#include <gst/cuda/gstcudautils.h>

#include "gstcudascale.h"

GST_DEBUG_CATEGORY_STATIC (gst_cuda_scale_debug);
#define GST_CAT_DEFAULT gst_cuda_scale_debug

#define gst_cuda_scale_parent_class parent_class
G_DEFINE_TYPE (GstCudaScale, gst_cuda_scale, GST_TYPE_CUDA_BASE_FILTER);

static GstCaps *gst_cuda_scale_transform_caps (GstBaseTransform * trans,
    GstPadDirection direction, GstCaps * caps, GstCaps * filter);
static GstCaps *gst_cuda_scale_fixate_caps (GstBaseTransform * base,
    GstPadDirection direction, GstCaps * caps, GstCaps * othercaps);
static gboolean gst_cuda_scale_set_info (GstCudaBaseTransform * filter,
    GstCaps * incaps, GstVideoInfo * in_info, GstCaps * outcaps,
    GstVideoInfo * out_info);

static void
gst_cuda_scale_class_init (GstCudaScaleClass * klass)
{
  GstElementClass *element_class = GST_ELEMENT_CLASS (klass);
  GstBaseTransformClass *trans_class = GST_BASE_TRANSFORM_CLASS (klass);
  GstCudaBaseTransformClass *btrans_class =
      GST_CUDA_BASE_TRANSFORM_CLASS (klass);

  gst_element_class_set_static_metadata (element_class,
      "CUDA Video scaler",
      "Filter/Converter/Video/Scaler/Hardware",
      "Resizes Video using CUDA", "Seungha Yang <seungha.yang@navercorp.com>");

  trans_class->transform_caps =
      GST_DEBUG_FUNCPTR (gst_cuda_scale_transform_caps);
  trans_class->fixate_caps = GST_DEBUG_FUNCPTR (gst_cuda_scale_fixate_caps);

  btrans_class->set_info = GST_DEBUG_FUNCPTR (gst_cuda_scale_set_info);

  GST_DEBUG_CATEGORY_INIT (gst_cuda_scale_debug,
      "cudascale", 0, "Video Resize using CUDA");
}

static void
gst_cuda_scale_init (GstCudaScale * cuda)
{
}

static GstCaps *
gst_cuda_scale_transform_caps (GstBaseTransform * trans,
    GstPadDirection direction, GstCaps * caps, GstCaps * filter)
{
  GstCaps *ret;
  GstStructure *structure;
  GstCapsFeatures *features;
  gint i, n;

  GST_DEBUG_OBJECT (trans,
      "Transforming caps %" GST_PTR_FORMAT " in direction %s", caps,
      (direction == GST_PAD_SINK) ? "sink" : "src");

  ret = gst_caps_new_empty ();
  n = gst_caps_get_size (caps);
  for (i = 0; i < n; i++) {
    structure = gst_caps_get_structure (caps, i);
    features = gst_caps_get_features (caps, i);

    /* If this is already expressed by the existing caps
     * skip this structure */
    if (i > 0 && gst_caps_is_subset_structure_full (ret, structure, features))
      continue;

    /* make copy */
    structure = gst_structure_copy (structure);

    gst_structure_set (structure, "width", GST_TYPE_INT_RANGE, 1, G_MAXINT,
        "height", GST_TYPE_INT_RANGE, 1, G_MAXINT, NULL);

    /* if pixel aspect ratio, make a range of it */
    if (gst_structure_has_field (structure, "pixel-aspect-ratio")) {
      gst_structure_set (structure, "pixel-aspect-ratio",
          GST_TYPE_FRACTION_RANGE, 1, G_MAXINT, G_MAXINT, 1, NULL);
    }

    gst_caps_append_structure_full (ret, structure,
        gst_caps_features_copy (features));
  }

  if (filter) {
    GstCaps *intersection;

    intersection =
        gst_caps_intersect_full (filter, ret, GST_CAPS_INTERSECT_FIRST);
    gst_caps_unref (ret);
    ret = intersection;
  }

  GST_DEBUG_OBJECT (trans, "returning caps: %" GST_PTR_FORMAT, ret);

  return ret;
}

/* fork of gstvideoscale */
static GstCaps *
gst_cuda_scale_fixate_caps (GstBaseTransform * base, GstPadDirection direction,
    GstCaps * caps, GstCaps * othercaps)
{
  GstStructure *ins, *outs;
  const GValue *from_par, *to_par;
  GValue fpar = G_VALUE_INIT;
  GValue tpar = G_VALUE_INIT;

  othercaps = gst_caps_truncate (othercaps);
  othercaps = gst_caps_make_writable (othercaps);

  GST_DEBUG_OBJECT (base, "trying to fixate othercaps %" GST_PTR_FORMAT
      " based on caps %" GST_PTR_FORMAT, othercaps, caps);

  ins = gst_caps_get_structure (caps, 0);
  outs = gst_caps_get_structure (othercaps, 0);

  from_par = gst_structure_get_value (ins, "pixel-aspect-ratio");
  to_par = gst_structure_get_value (outs, "pixel-aspect-ratio");

  /* If we're fixating from the sinkpad we always set the PAR and
   * assume that missing PAR on the sinkpad means 1/1 and
   * missing PAR on the srcpad means undefined
   */
  if (direction == GST_PAD_SINK) {
    if (!from_par) {
      g_value_init (&fpar, GST_TYPE_FRACTION);
      gst_value_set_fraction (&fpar, 1, 1);
      from_par = &fpar;
    }
    if (!to_par) {
      g_value_init (&tpar, GST_TYPE_FRACTION_RANGE);
      gst_value_set_fraction_range_full (&tpar, 1, G_MAXINT, G_MAXINT, 1);
      to_par = &tpar;
    }
  } else {
    if (!to_par) {
      g_value_init (&tpar, GST_TYPE_FRACTION);
      gst_value_set_fraction (&tpar, 1, 1);
      to_par = &tpar;

      gst_structure_set (outs, "pixel-aspect-ratio", GST_TYPE_FRACTION, 1, 1,
          NULL);
    }
    if (!from_par) {
      g_value_init (&fpar, GST_TYPE_FRACTION);
      gst_value_set_fraction (&fpar, 1, 1);
      from_par = &fpar;
    }
  }

  /* we have both PAR but they might not be fixated */
  {
    gint from_w, from_h, from_par_n, from_par_d, to_par_n, to_par_d;
    gint w = 0, h = 0;
    gint from_dar_n, from_dar_d;
    gint num, den;

    /* from_par should be fixed */
    g_return_val_if_fail (gst_value_is_fixed (from_par), othercaps);

    from_par_n = gst_value_get_fraction_numerator (from_par);
    from_par_d = gst_value_get_fraction_denominator (from_par);

    gst_structure_get_int (ins, "width", &from_w);
    gst_structure_get_int (ins, "height", &from_h);

    gst_structure_get_int (outs, "width", &w);
    gst_structure_get_int (outs, "height", &h);

    /* if both width and height are already fixed, we can't do anything
     * about it anymore */
    if (w && h) {
      guint n, d;

      GST_DEBUG_OBJECT (base, "dimensions already set to %dx%d, not fixating",
          w, h);
      if (!gst_value_is_fixed (to_par)) {
        if (gst_video_calculate_display_ratio (&n, &d, from_w, from_h,
                from_par_n, from_par_d, w, h)) {
          GST_DEBUG_OBJECT (base, "fixating to_par to %dx%d", n, d);
          if (gst_structure_has_field (outs, "pixel-aspect-ratio"))
            gst_structure_fixate_field_nearest_fraction (outs,
                "pixel-aspect-ratio", n, d);
          else if (n != d)
            gst_structure_set (outs, "pixel-aspect-ratio", GST_TYPE_FRACTION,
                n, d, NULL);
        }
      }
      goto done;
    }

    /* Calculate input DAR */
    if (!gst_util_fraction_multiply (from_w, from_h, from_par_n, from_par_d,
            &from_dar_n, &from_dar_d)) {
      GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL),
          ("Error calculating the output scaled size - integer overflow"));
      goto done;
    }

    GST_DEBUG_OBJECT (base, "Input DAR is %d/%d", from_dar_n, from_dar_d);

    /* If either width or height are fixed there's not much we
     * can do either except choosing a height or width and PAR
     * that matches the DAR as good as possible
     */
    if (h) {
      GstStructure *tmp;
      gint set_w, set_par_n, set_par_d;

      GST_DEBUG_OBJECT (base, "height is fixed (%d)", h);

      /* If the PAR is fixed too, there's not much to do
       * except choosing the width that is nearest to the
       * width with the same DAR */
      if (gst_value_is_fixed (to_par)) {
        to_par_n = gst_value_get_fraction_numerator (to_par);
        to_par_d = gst_value_get_fraction_denominator (to_par);

        GST_DEBUG_OBJECT (base, "PAR is fixed %d/%d", to_par_n, to_par_d);

        if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, to_par_d,
                to_par_n, &num, &den)) {
          GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL),
              ("Error calculating the output scaled size - integer overflow"));
          goto done;
        }

        w = (guint) gst_util_uint64_scale_int_round (h, num, den);
        gst_structure_fixate_field_nearest_int (outs, "width", w);

        goto done;
      }

      /* The PAR is not fixed and it's quite likely that we can set
       * an arbitrary PAR. */

      /* Check if we can keep the input width */
      tmp = gst_structure_copy (outs);
      gst_structure_fixate_field_nearest_int (tmp, "width", from_w);
      gst_structure_get_int (tmp, "width", &set_w);

      /* Might have failed but try to keep the DAR nonetheless by
       * adjusting the PAR */
      if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, h, set_w,
              &to_par_n, &to_par_d)) {
        GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL),
            ("Error calculating the output scaled size - integer overflow"));
        gst_structure_free (tmp);
        goto done;
      }

      if (!gst_structure_has_field (tmp, "pixel-aspect-ratio"))
        gst_structure_set_value (tmp, "pixel-aspect-ratio", to_par);
      gst_structure_fixate_field_nearest_fraction (tmp, "pixel-aspect-ratio",
          to_par_n, to_par_d);
      gst_structure_get_fraction (tmp, "pixel-aspect-ratio", &set_par_n,
          &set_par_d);
      gst_structure_free (tmp);

      /* Check if the adjusted PAR is accepted */
      if (set_par_n == to_par_n && set_par_d == to_par_d) {
        if (gst_structure_has_field (outs, "pixel-aspect-ratio") ||
            set_par_n != set_par_d)
          gst_structure_set (outs, "width", G_TYPE_INT, set_w,
              "pixel-aspect-ratio", GST_TYPE_FRACTION, set_par_n, set_par_d,
              NULL);
        goto done;
      }

      /* Otherwise scale the width to the new PAR and check if the
       * adjusted with is accepted. If all that fails we can't keep
       * the DAR */
      if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, set_par_d,
              set_par_n, &num, &den)) {
        GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL),
            ("Error calculating the output scaled size - integer overflow"));
        goto done;
      }

      w = (guint) gst_util_uint64_scale_int_round (h, num, den);
      gst_structure_fixate_field_nearest_int (outs, "width", w);
      if (gst_structure_has_field (outs, "pixel-aspect-ratio") ||
          set_par_n != set_par_d)
        gst_structure_set (outs, "pixel-aspect-ratio", GST_TYPE_FRACTION,
            set_par_n, set_par_d, NULL);

      goto done;
    } else if (w) {
      GstStructure *tmp;
      gint set_h, set_par_n, set_par_d;

      GST_DEBUG_OBJECT (base, "width is fixed (%d)", w);

      /* If the PAR is fixed too, there's not much to do
       * except choosing the height that is nearest to the
       * height with the same DAR */
      if (gst_value_is_fixed (to_par)) {
        to_par_n = gst_value_get_fraction_numerator (to_par);
        to_par_d = gst_value_get_fraction_denominator (to_par);

        GST_DEBUG_OBJECT (base, "PAR is fixed %d/%d", to_par_n, to_par_d);

        if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, to_par_d,
                to_par_n, &num, &den)) {
          GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL),
              ("Error calculating the output scaled size - integer overflow"));
          goto done;
        }

        h = (guint) gst_util_uint64_scale_int_round (w, den, num);
        gst_structure_fixate_field_nearest_int (outs, "height", h);

        goto done;
      }

      /* The PAR is not fixed and it's quite likely that we can set
       * an arbitrary PAR. */

      /* Check if we can keep the input height */
      tmp = gst_structure_copy (outs);
      gst_structure_fixate_field_nearest_int (tmp, "height", from_h);
      gst_structure_get_int (tmp, "height", &set_h);

      /* Might have failed but try to keep the DAR nonetheless by
       * adjusting the PAR */
      if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, set_h, w,
              &to_par_n, &to_par_d)) {
        GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL),
            ("Error calculating the output scaled size - integer overflow"));
        gst_structure_free (tmp);
        goto done;
      }
      if (!gst_structure_has_field (tmp, "pixel-aspect-ratio"))
        gst_structure_set_value (tmp, "pixel-aspect-ratio", to_par);
      gst_structure_fixate_field_nearest_fraction (tmp, "pixel-aspect-ratio",
          to_par_n, to_par_d);
      gst_structure_get_fraction (tmp, "pixel-aspect-ratio", &set_par_n,
          &set_par_d);
      gst_structure_free (tmp);

      /* Check if the adjusted PAR is accepted */
      if (set_par_n == to_par_n && set_par_d == to_par_d) {
        if (gst_structure_has_field (outs, "pixel-aspect-ratio") ||
            set_par_n != set_par_d)
          gst_structure_set (outs, "height", G_TYPE_INT, set_h,
              "pixel-aspect-ratio", GST_TYPE_FRACTION, set_par_n, set_par_d,
              NULL);
        goto done;
      }

      /* Otherwise scale the height to the new PAR and check if the
       * adjusted with is accepted. If all that fails we can't keep
       * the DAR */
      if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, set_par_d,
              set_par_n, &num, &den)) {
        GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL),
            ("Error calculating the output scaled size - integer overflow"));
        goto done;
      }

      h = (guint) gst_util_uint64_scale_int_round (w, den, num);
      gst_structure_fixate_field_nearest_int (outs, "height", h);
      if (gst_structure_has_field (outs, "pixel-aspect-ratio") ||
          set_par_n != set_par_d)
        gst_structure_set (outs, "pixel-aspect-ratio", GST_TYPE_FRACTION,
            set_par_n, set_par_d, NULL);

      goto done;
    } else if (gst_value_is_fixed (to_par)) {
      GstStructure *tmp;
      gint set_h, set_w, f_h, f_w;

      to_par_n = gst_value_get_fraction_numerator (to_par);
      to_par_d = gst_value_get_fraction_denominator (to_par);

      /* Calculate scale factor for the PAR change */
      if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, to_par_n,
              to_par_d, &num, &den)) {
        GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL),
            ("Error calculating the output scaled size - integer overflow"));
        goto done;
      }

      /* Try to keep the input height (because of interlacing) */
      tmp = gst_structure_copy (outs);
      gst_structure_fixate_field_nearest_int (tmp, "height", from_h);
      gst_structure_get_int (tmp, "height", &set_h);

      /* This might have failed but try to scale the width
       * to keep the DAR nonetheless */
      w = (guint) gst_util_uint64_scale_int_round (set_h, num, den);
      gst_structure_fixate_field_nearest_int (tmp, "width", w);
      gst_structure_get_int (tmp, "width", &set_w);
      gst_structure_free (tmp);

      /* We kept the DAR and the height is nearest to the original height */
      if (set_w == w) {
        gst_structure_set (outs, "width", G_TYPE_INT, set_w, "height",
            G_TYPE_INT, set_h, NULL);
        goto done;
      }

      f_h = set_h;
      f_w = set_w;

      /* If the former failed, try to keep the input width at least */
      tmp = gst_structure_copy (outs);
      gst_structure_fixate_field_nearest_int (tmp, "width", from_w);
      gst_structure_get_int (tmp, "width", &set_w);

      /* This might have failed but try to scale the width
       * to keep the DAR nonetheless */
      h = (guint) gst_util_uint64_scale_int_round (set_w, den, num);
      gst_structure_fixate_field_nearest_int (tmp, "height", h);
      gst_structure_get_int (tmp, "height", &set_h);
      gst_structure_free (tmp);

      /* We kept the DAR and the width is nearest to the original width */
      if (set_h == h) {
        gst_structure_set (outs, "width", G_TYPE_INT, set_w, "height",
            G_TYPE_INT, set_h, NULL);
        goto done;
      }

      /* If all this failed, keep the dimensions with the DAR that was closest
       * to the correct DAR. This changes the DAR but there's not much else to
       * do here.
       */
      if (set_w * ABS (set_h - h) < ABS (f_w - w) * f_h) {
        f_h = set_h;
        f_w = set_w;
      }
      gst_structure_set (outs, "width", G_TYPE_INT, f_w, "height", G_TYPE_INT,
          f_h, NULL);
      goto done;
    } else {
      GstStructure *tmp;
      gint set_h, set_w, set_par_n, set_par_d, tmp2;

      /* width, height and PAR are not fixed but passthrough is not possible */

      /* First try to keep the height and width as good as possible
       * and scale PAR */
      tmp = gst_structure_copy (outs);
      gst_structure_fixate_field_nearest_int (tmp, "height", from_h);
      gst_structure_get_int (tmp, "height", &set_h);
      gst_structure_fixate_field_nearest_int (tmp, "width", from_w);
      gst_structure_get_int (tmp, "width", &set_w);

      if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, set_h, set_w,
              &to_par_n, &to_par_d)) {
        GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL),
            ("Error calculating the output scaled size - integer overflow"));
        gst_structure_free (tmp);
        goto done;
      }

      if (!gst_structure_has_field (tmp, "pixel-aspect-ratio"))
        gst_structure_set_value (tmp, "pixel-aspect-ratio", to_par);
      gst_structure_fixate_field_nearest_fraction (tmp, "pixel-aspect-ratio",
          to_par_n, to_par_d);
      gst_structure_get_fraction (tmp, "pixel-aspect-ratio", &set_par_n,
          &set_par_d);
      gst_structure_free (tmp);

      if (set_par_n == to_par_n && set_par_d == to_par_d) {
        gst_structure_set (outs, "width", G_TYPE_INT, set_w, "height",
            G_TYPE_INT, set_h, NULL);

        if (gst_structure_has_field (outs, "pixel-aspect-ratio") ||
            set_par_n != set_par_d)
          gst_structure_set (outs, "pixel-aspect-ratio", GST_TYPE_FRACTION,
              set_par_n, set_par_d, NULL);
        goto done;
      }

      /* Otherwise try to scale width to keep the DAR with the set
       * PAR and height */
      if (!gst_util_fraction_multiply (from_dar_n, from_dar_d, set_par_d,
              set_par_n, &num, &den)) {
        GST_ELEMENT_ERROR (base, CORE, NEGOTIATION, (NULL),
            ("Error calculating the output scaled size - integer overflow"));
        goto done;
      }

      w = (guint) gst_util_uint64_scale_int_round (set_h, num, den);
      tmp = gst_structure_copy (outs);
      gst_structure_fixate_field_nearest_int (tmp, "width", w);
      gst_structure_get_int (tmp, "width", &tmp2);
      gst_structure_free (tmp);

      if (tmp2 == w) {
        gst_structure_set (outs, "width", G_TYPE_INT, tmp2, "height",
            G_TYPE_INT, set_h, NULL);
        if (gst_structure_has_field (outs, "pixel-aspect-ratio") ||
            set_par_n != set_par_d)
          gst_structure_set (outs, "pixel-aspect-ratio", GST_TYPE_FRACTION,
              set_par_n, set_par_d, NULL);
        goto done;
      }

      /* ... or try the same with the height */
      h = (guint) gst_util_uint64_scale_int_round (set_w, den, num);
      tmp = gst_structure_copy (outs);
      gst_structure_fixate_field_nearest_int (tmp, "height", h);
      gst_structure_get_int (tmp, "height", &tmp2);
      gst_structure_free (tmp);

      if (tmp2 == h) {
        gst_structure_set (outs, "width", G_TYPE_INT, set_w, "height",
            G_TYPE_INT, tmp2, NULL);
        if (gst_structure_has_field (outs, "pixel-aspect-ratio") ||
            set_par_n != set_par_d)
          gst_structure_set (outs, "pixel-aspect-ratio", GST_TYPE_FRACTION,
              set_par_n, set_par_d, NULL);
        goto done;
      }

      /* If all fails we can't keep the DAR and take the nearest values
       * for everything from the first try */
      gst_structure_set (outs, "width", G_TYPE_INT, set_w, "height",
          G_TYPE_INT, set_h, NULL);
      if (gst_structure_has_field (outs, "pixel-aspect-ratio") ||
          set_par_n != set_par_d)
        gst_structure_set (outs, "pixel-aspect-ratio", GST_TYPE_FRACTION,
            set_par_n, set_par_d, NULL);
    }
  }

done:
  GST_DEBUG_OBJECT (base, "fixated othercaps to %" GST_PTR_FORMAT, othercaps);

  if (from_par == &fpar)
    g_value_unset (&fpar);
  if (to_par == &tpar)
    g_value_unset (&tpar);

  return othercaps;
}

static gboolean
gst_cuda_scale_set_info (GstCudaBaseTransform * btrans, GstCaps * incaps,
    GstVideoInfo * in_info, GstCaps * outcaps, GstVideoInfo * out_info)
{
  if (GST_VIDEO_INFO_WIDTH (in_info) == GST_VIDEO_INFO_WIDTH (out_info) &&
      GST_VIDEO_INFO_HEIGHT (in_info) == GST_VIDEO_INFO_HEIGHT (out_info) &&
      GST_VIDEO_INFO_FORMAT (in_info) == GST_VIDEO_INFO_FORMAT (out_info)) {
    gst_base_transform_set_passthrough (GST_BASE_TRANSFORM (btrans), TRUE);
  }

  return GST_CUDA_BASE_TRANSFORM_CLASS (parent_class)->set_info (btrans,
      incaps, in_info, outcaps, out_info);
}