%  Part 2: Non-path options.
 
% Write .log/.dvi/etc. files here, if the current directory is unwritable.
% TEXMFOUTPUT = /tmp

% If a dynamic file creation fails, log the command to this file, in
% either the current directory or TEXMFOUTPUT.  Set to the
% empty string or  0  to avoid logging.
MISSFONT_LOG = missfont.log

% Set to a colon-separated list of words specifying warnings to suppress.
% To suppress everything, use TEX_HUSH = all; this is currently equivalent to
% TEX_HUSH = checksum:lostchar:readable:special
% To suppress nothing, use TEX_HUSH = none or do not set the variable at all.
TEX_HUSH = none

% Enable system commands via \write18{...}?
shell_escape = f

% Allow TeX \openin, \openout, or \input on filenames starting with `.'
% (e.g., .rhosts) or outside the current tree (e.g., /etc/passwd)?
% a (any)        : any file can be opened.
% r (restricted) : disallow opening "dotfiles".
% p (paranoid)   : as 'r' and disallow going to parent directories, and
%                  restrict absolute paths to be under $TEXMFOUTPUT.
openout_any = p
openin_any = a

% Allow TeX, MF, and MP to parse the first line of an input file for
% the %&format construct.
parse_first_line = t

% Allow TeX, eTeX, Omega to include `src:' specials in the dvi file.
% These specials are used by viewers to jump from the viewer into 
% the editor at the right page/lineno.
% Possible values : none auto cr display hbox math par parend vbox
src_specials = none

% Enable the mktex... scripts by default?  These must be set to 0 or 1.
% Particular programs can and do override these settings, for example
% dvips's -M option.  Your first chance to specify whether the scripts
% are invoked by default is at configure time.
% 
% These values are ignored if the script names are changed; e.g., if you
% set DVIPSMAKEPK to `foo', what counts is the value of the environment
% variable/config value `FOO', not the `MKTEXPK' value.
% 
% MKTEXTEX = 0
% MKTEXPK = 0
% MKTEXMF = 0
% MKTEXTFM = 0
% MKOCP = 0
% MKOFM = 0

% What MetaPost runs to make MPX files.  This is passed an option -troff
% if MP is in troff mode.  Set to `0' to disable this feature.
MPXCOMMAND = makempx


%  Part 3: Array and other sizes for TeX (and Metafont and MetaPost).
% 
% If you want to change some of these sizes only for a certain TeX
% variant, the usual dot notation works, e.g.,
% main_memory.hugetex = 20000000
% 
% If a change here appears to be ignored, try redumping the format file.

% Memory. Must be less than 8,000,000 total.
% 
% main_memory is relevant only to initex, extra_mem_* only to non-ini.
% Thus, have to redump the .fmt file after changing main_memory; to add
% to existing fmt files, increase extra_mem_*.  (To get an idea of how
% much, try \tracingstats=2 in your TeX source file;
% web2c/tests/memtest.tex might also be interesting.)
% 
% To increase space for boxes (as might be needed by, e.g., PiCTeX),
% increase extra_mem_bot.
% 
% For some xy-pic samples, you may need as much as 700000 words of memory.
% For the vast majority of documents, 60000 or less will do.
% 
main_memory.context = 1500000
main_memory.mpost = 1000000
main_memory = 2500000 % words of inimemory available; also applies to inimf&mp
extra_mem_top = 0    % extra high memory for chars, tokens, etc.
extra_mem_bot = 0    % extra low memory for boxes, glue, breakpoints, etc.

obj_tab_size.context = 300000

% Words of font info for TeX (total size of all TFM files, approximately). 
font_mem_size = 400000

% Total number of fonts. Must be >= 50 and <= 2000 (without tex.ch changes).
font_max = 1000

% Extra space for the hash table of control sequences (which allows 10K
% names as distributed).
hash_extra.context = 40000
hash_extra = 50000

% Max number of characters in all strings, including all error messages,
% help texts, font names, control sequences.  These values apply to TeX and MP.
pool_size.context = 750000
pool_size = 500000
% Minimum pool space after TeX/MP's own strings; must be at least
% 25000 less than pool_size, but doesn't need to be nearly that large.
string_vacancies.context = 45000
string_vacancies = 45000
% Maximum number of strings.
max_strings.context = 55000
max_strings = 55000
% min pool space left after loading .fmt
pool_free.context = 47500
pool_free = 5000

% Hyphenation trie. As distributed, the maximum is 65535; this should
% work unless `unsigned short' is not supported or is smaller than 16
% bits.  This value should suffice for UK English, US English, French,
% and German (for example).  To increase, you must change
% `ssup_trie_opcode' and `ssup_trie_size' in tex.ch (and rebuild TeX);
% the trie will then consume four bytes per entry, instead of two.
% 
% US English, German, and Portuguese: 30000.
% German: 14000.
% US English: 10000.
% 
trie_size = 64000

% Buffer size.  TeX uses the buffer to contain input lines, but macro
% expansion works by writing material into the buffer and reparsing the
% line.  As a consequence, certain constructs require the buffer to be
% very large.  As distributed, the size is 50000; most documents can be
% handled within a tenth of this size.
buf_size = 200000

hyph_size = 1000        % number of hyphenation exceptions, >610 and <32767.
nest_size.context = 500
nest_size = 500		% simultaneous semantic levels (e.g., groups)
max_in_open = 15	% simultaneous input files and error insertions
param_size.context = 1500
param_size = 1500	% simultaneous macro parameters
save_size.context = 5000
save_size = 10000	% for saving values outside current group
stack_size.context = 1500
stack_size = 300	% simultaneous input sources

% These are Omega-specific.
ocp_buf_size = 20000	% character buffers for ocp filters.
ocp_stack_size = 10000	% stacks for ocp computations.
ocp_list_size = 1000	% control for multiple ocps.

% These work best if they are the same as the I/O buffer size, but it
% doesn't matter much.  Must be a multiple of 8.
dvi_buf_size = 16384 % TeX
gf_buf_size = 16384  % MF

% It's probably inadvisable to change these. At any rate, we must have:
% 45 < error_line      < 255;
% 30 < half_error_line < error_line - 15;
% 60 <= max_print_line;
% These apply to Metafont and MetaPost as well.
error_line = 79
half_error_line = 50
max_print_line = 79

% Settings for Debian jadetex
  hash_extra.jadetex  = 32500
  hash_extra.pdfjadetex  = 32500
  pool_size.jadetex = 500000
  pool_size.pdfjadetex = 500000
  string_vacancies.jadetex = 45000
  string_vacancies.pdfjadetex = 45000
  max_strings.jadetex = 58500
  max_strings.pdfjadetex = 58500
  pool_free.jadetex = 47500
  pool_free.pdfjadetex = 47500
  nest_size.jadetex = 500
  nest_size.pdfjadetex = 500
  param_size.jadetex = 1500
  param_size.pdfjadetex = 1500
  save_size.jadetex = 5000
  save_size.pdfjadetex = 5000
  stack_size.jadetex = 1500
  stack_size.pdfjadetex = 1500
  extra_mem_bot.jadetex = 85000
  extra_mem_bot.pdfjadetex = 85000