Add a new enable-last-buffer property. When false, it disables storing the last
received buffer in basesink::last-buffer. This can be useful in cases where
buffers need to be released asap.
API: GstBaseSink::enable-last-buffer
For the reason outlined at the beginning of gst_private.h (inline
functions in glib may need the g_log_domain variable). Also include
gst_private.h before using any G_OS_* defines, esp. in plugin loader.
This allows demuxers to update the segment stop of an already
finished stream. This might be needed if some stream goes to
EOS before the duration of the longest stream is known to properly
set the segment stop of all streams to the same value in the end.
Rounding errors with the floating point rate could make it so that we
don't end up exactly at the required stepping duration.
Use the segment clipping boundaries, which are not subject to rate
adjustements, instead to detect when we reached the stepping duration.
Add some debug info related to going to the PAUSED state.
When clamping the base time, correctly use 'now', instead of
'-now' - the intent is to prevent 'now-base' ever being
negative, which would cause a position report outside the segment.
Fixes: #602419
Element base_time is a signed quantity, which leads to basesink returning
a position of 0 when dealing with a negative base time - which are quite
legal when clocks (such as the audio clock) are close to 0.
This doesn't manifest in normal pipelines, of course - but can happen
(at least) when manually setting the base time on a pipeline.
There's not much point in using GST_DEBUG_FUNCPTR with GObject
virtual functions such as get_property, set_propery, finalize and
dispose, since they'll never be used by anyone anyway. Saves a
few bytes and possibly a tenth of a polar bear.
The code was previously:
* checking if ret was != OK
* .. but if it was FLOW_STEP, swith it to OK
* .. and then not using ret
Instead we just make it more compact by checking if it's OK or STEP.
Update design doc with step-start docs.
Add eos field to step done message
when stepping in reverse, update the segment time field.
Flush out the current step when we are flushing.
When we start stepping, store the start/stop values of the segment before we
install new start/stop values for clipping in non-flushing steps.
for non-flushing steps, update the element start time. For flushing steps, it
does not change because running_time does not advance
Make sure we always perform the stop_stepping operations even when we drop
frames.
Note in the docs that a flushing step in PLAYING brings the pipeline to the lost
state and skips the data before prerolling again.
Implement the flushing step correctly by invalidating the current step
operation, which would activate the new step operation.
When a subclass is blocking in _wait_preroll() in the _render method, make sure
we can unlock the subclass and detect this return value from the render method.
Update framestep document, we want to pass the flush flag in the step-done
message.
Add flush flag to the gstmessage.
Update examples to use the new step-done message api.
Implement framestep with playback rates < 0.0 too.
Make start and stop_stepping methods and move their invocation in the right
places.
Perform the atual stepping operation where we have full context about the
timestamps.
Unlock the prerolled frame and recheck if we need to step.
Keep a simple counter for the frames we're about to skip while stepping and
preroll/post step_done when stepping finished.
Due to a typo basesink didn't do any emergency rendering of late buffers
if the only buffer ever rendered was the first one with timestamp 0. This
means that in cases where the decoder is very very slow, we'd never see
any buffers but the very first one rendered. Fixes#576381.
When we are not ready to handle a latency query (we are not yet prerolled) we
also don't try to forward the latency event because that might cause unexpected
errors when upstream is not yet linked.
Fix a regression introduced by fix for #567725 in commit
1c7ab4ed4f. We should only call the preroll
function once namely when we did not yet commit the state change.
Add a unit test to check that we call the preroll function when interrupting the
clock_wait (see #567725).
Add a unit test to check that we only call the preroll function once.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_wait_clock):
* libs/gst/base/gstbasesink.h:
Fix documentation for the wait_clock method, rename basesink -> sink
for consistency.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_position_last),
(gst_base_sink_get_position_paused), (gst_base_sink_get_position):
Release the object lock before calling the query convert pad functions
to avoid deadlocks.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_init), (gst_base_sink_set_property),
(gst_base_sink_get_property):
Expose the render-delay as a property so things like appsink can use it
to tweak the synchronisation.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_render_delay):
Changing the render delay changes the latency and so we must post a
latency message.
Original commit message from CVS:
* gst/gstbin.c: (bin_handle_async_start),
(gst_bin_handle_message_func), (gst_bin_query):
* libs/gst/base/gstbasesink.c: (gst_base_sink_render_object),
(gst_base_sink_event), (gst_base_sink_change_state):
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek),
(gst_base_src_loop), (gst_base_src_change_state):
Copy seqnums from events to messages so that they can all be related
back to eachother.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_default_do_seek),
(gst_base_sink_default_prepare_seek_segment),
(gst_base_sink_perform_seek), (gst_base_sink_get_position_last),
(gst_base_sink_get_position_paused), (gst_base_sink_get_position),
(gst_base_sink_query):
Implement more seeking in pull mode.
Use pad convert functions to convert position to the requested format.
Fix position/duration reporting in pull mode.
Implement position and duration reporting in other formats than time.
* libs/gst/base/gstbasesink.h:
Add member to keep track of when the segment is playing.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_pad_activate_pull),
(gst_base_sink_query):
Query the total number of bytes when activating the pad in pull mode.
Implement duration query in pull mode by using the installed pad convert
function to convert from bytes to the requested format.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_do_preroll),
(gst_base_sink_flush_start), (gst_base_sink_flush_stop),
(gst_base_sink_event), (gst_base_sink_perform_seek),
(gst_base_sink_loop), (gst_base_sink_pad_activate_pull),
(gst_base_sink_send_event), (gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
Add method to commit the state in subclasses.
Refactor the flush_start and flush_stop code because we need it for
flushing while seeking too.
Implement the beginnings of seeking in pull mode.
Use the segment last_stop field for the pulling offset.
Fix the pause method in pull mode.
Configure the segment to BYTES for pull mode.
API: GstBaseSink::gst_base_sink_do_preroll()
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_remove_func), (update_degree),
(gst_bin_handle_message_func):
The message src can be NULL, don't try to print the object names in that
case.
* libs/gst/base/gstbasesink.c: (gst_base_sink_pad_activate):
Add some more debug info.
* tests/check/pipelines/simple-launch-lines.c: (run_pipeline),
(GST_START_TEST):
Add some debug.
Fix the test, pull based sinks go ASYNC to PAUSED, just like other
scheduling modes.
Original commit message from CVS:
* docs/design/part-negotiation.txt:
Small doc update.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_pad_getcaps), (gst_base_sink_pad_setcaps),
(gst_base_sink_init), (gst_base_sink_set_blocksize),
(gst_base_sink_get_blocksize), (gst_base_sink_set_property),
(gst_base_sink_get_property), (gst_base_sink_needs_preroll),
(gst_base_sink_loop), (gst_base_sink_pad_activate),
(gst_base_sink_negotiate_pull), (gst_base_sink_pad_activate_pull),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
Add blocksize property and methods to control the amount of data
to pull.
Negotiate first before activating upstream in pull mode so that they can
negotiate themselves.
When we operate in pull mode, we only accept the caps that we
negotiated.
Make the sink go ASYNC to PAUSED, like all other sinks.
API: GstBaseSink::gst_base_sink_set_blocksize()
API: GstBaseSink::gst_base_sink_get_blocksize()
API: GstBaseSink::blocksize
* libs/gst/base/gstbasesrc.c: (gst_base_src_wait_playing),
(gst_base_src_set_live), (gst_base_src_is_live),
(gst_base_src_set_format), (gst_base_src_query_latency),
(gst_base_src_set_blocksize), (gst_base_src_get_blocksize),
(gst_base_src_set_do_timestamp), (gst_base_src_get_do_timestamp),
(gst_base_src_set_property), (gst_base_src_get_property):
* libs/gst/base/gstbasesrc.h:
Add typechecking in public API functions.
Add methods to control the blocksize in subclasses.
API: GstBaseSrc::gst_base_src_set_blocksize()
API: GstBaseSrc::gst_base_src_get_blocksize()
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_send_event):
Forward LATENCY events upstreams so that elements know about the total
pipeline latency. Fixes#555307.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_position),
(gst_base_sink_query):
Improve position reporting while flushing and other intermediate state
changes. Fixes#553874.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_render_object),
(gst_base_sink_event), (gst_base_sink_chain_unlocked),
(gst_base_sink_negotiate_pull), (gst_base_sink_pad_activate_pull),
(gst_base_sink_get_position), (gst_base_sink_change_state):
Improve position reporting in the flushing state.
Also report the position when we are not yet prerolled but we
have a newsegment event. Fixes#543444.
Improve the pull-based negotiation code.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Add testcase for position reporting while flushing in PAUSED and
PLAYING.
* tests/check/generic/sinks.c: (GST_START_TEST):
Update unit-test, we can now query the position as soon as we receive a
NEWSEGMENT event.
Original commit message from CVS:
Based on patch by: Jason Zhao <e3423c at motorola dot com>
* libs/gst/base/gstbasesink.c: (gst_base_sink_render_object):
When the subclass event handler releases the PREROLL_LOCK, we could be
in the flushing state and we have to ignore the event. Fixes#548394.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_init),
(gst_base_sink_query_latency), (gst_base_sink_set_render_delay),
(gst_base_sink_get_render_delay), (gst_base_sink_wait_eos),
(gst_base_sink_do_sync):
* libs/gst/base/gstbasesink.h:
* win32/common/libgstbase.def:
Add method to allow sinks to specify additional delay between the sync
times and the actual rendering of the data.
API: gst_base_sink_set_render_delay()
API: gst_base_sink_get_render_delay()
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_wait_eos), (gst_base_sink_event):
If we have not seen a buffer before EOS, use the segment values to
report the current position instead of invalid positions.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_async_enabled),
(gst_base_sink_set_ts_offset), (gst_base_sink_perform_qos):
Add some debug.
Make sure we don't generate invalid QoS messages.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_get_position):
The reported position must always be smaller than the last seen
timestamps (or timestamp + duration for reverse).
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_get_position_last), (gst_base_sink_get_position):
Fix position query range checks in reverse playback.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times):
If nothing else can be used, use the last buffer's start time as
the segment's last stop. Fixes bug #534258.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_wait_clock):
* libs/gst/base/gstbasesink.h:
Expose a method that was previously used internally to synchronize
against the clock because it can be useful for subclasses too.
GstBaseSink::gst_base_sink_wait_clock()
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_adjust_time),
(gst_base_sink_wait_clock), (gst_base_sink_wait_eos),
(gst_base_sink_do_sync), (gst_base_sink_chain_unlocked):
Refactor adjusting the running_time with latency and offset into a
separate method.
When doing clipping, we still want to use the subclass get_times method,
just in case the DURATION or TIMESTAMP are not set.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_query_latency),
(gst_base_sink_send_event):
Rearrange the latency query code. We always want to do the upstream
query, even if we are not live so that the upstream elements can get the
latency results too. If we fail doing the query and we are live, we
return TRUE afterwards.
Original commit message from CVS:
* gst/gstutils.c:
* gst/gstutils.h:
API: Deprecate gst_atomic_int_set(), g_atomic_int_set() should be used
now that we depend on new enough GLib.
* gst/gstcaps.c: (gst_static_caps_get):
* gst/gstclock.c: (gst_clock_entry_new):
* gst/gstinfo.c: (_gst_debug_init), (gst_debug_set_colored),
(gst_debug_set_default_threshold), (_gst_debug_category_new),
(gst_debug_category_set_threshold):
* libs/gst/base/gstbasesink.c: (gst_base_sink_init),
(gst_base_sink_set_qos_enabled):
* libs/gst/net/gstnettimeprovider.c:
(gst_net_time_provider_set_property):
Use g_atomic_int_set() instead of gst_atomic_int_set().
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_loop),
(gst_base_sink_get_position_paused):
Add fixme regarding EOS in pull mode.
Fix position reporting in PAUSED for negative rates.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstclock.h:
* gst/gstdebugutils.c:
* gst/gstinfo.c:
* gst/gstutils.c:
* gst/gstutils.h:
* libs/gst/base/gstbasesink.c:
* tools/gst-launch.c:
Change GST_GET_TIMESTAMP into gst_util_get_timestamp and replace all
uses as we don't have HAVE_POSIX_TIMERS in public headers.
Thanks Tim for spotting.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_last_buffer):
Don't hold the object lock when unreffing a buffer because it could
cause a deadlock when the finalize function wants to grab the object
lock too. Fixes#495133.
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_set_newsegment_full),
(gst_segment_to_stream_time), (gst_segment_to_running_time):
Also accumulate time correctly when doing reverse playback. Fixes
#488201,
When converting to running and stream time, use default values for
start/stop/time/accum when comparing different formats. Fixes#494245.
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times):
Do running/stream time in TIME format.
* tests/check/gst/gstsegment.c: (GST_START_TEST),
(gst_segment_suite):
2 new unit tests for segment accumulation.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_do_sync), (gst_base_sink_preroll_object),
(gst_base_sink_event), (gst_base_sink_get_position_last),
(gst_base_sink_get_position_paused), (gst_base_sink_get_position),
(gst_base_sink_change_state):
Don't try to report a 0 position when we don't know, return -1 and FALSE
instead. This mostly happens when we are prerolling.
Make sure we can report the right position before we post the ASYNC_DONE
message so that a message handler can query position without races.
* tests/check/generic/sinks.c: (send_eos), (GST_START_TEST),
(async_done_handoff), (async_done_func), (send_buffer),
(async_done_eos_func), (gst_sinks_suite):
Add two tests for the above.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_get_last_buffer), (gst_base_sink_set_last_buffer),
(gst_base_sink_get_property), (gst_base_sink_render_object),
(gst_base_sink_preroll_object),
(gst_base_sink_queue_object_unlocked), (gst_base_sink_event),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
Add a new last-buffer property that contains the last buffer used in
basesink for preroll or rendering. useful for making snapshots.
API: gst_base_sink_get_last_buffer()
API: GstBaseSink::last-buffer
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_event):
Reset last seen position after flushing so that we don't report the old
position anymore.
Original commit message from CVS:
Patch inspired by: Benoit Fouet <benoit dot fouet at purplelabs dot com>
* libs/gst/base/gstbasesink.c: (gst_base_sink_wait_eos),
(gst_base_sink_event):
* libs/gst/base/gstbasesink.h:
Add function to wait for EOS, subclasses can use this to correctly wait
for devices to drain before performing the EOS logic. Fixes#485343.
API: gst_base_sink_wait_eos()
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_preroll_queue_flush),
(gst_base_sink_queue_object_unlocked),
(gst_base_sink_queue_object), (gst_base_sink_event),
(gst_base_sink_needs_preroll), (gst_base_sink_chain_unlocked):
When we received EOS and are waiting for when to post the EOS message,
our state is prerolled and we should not return ASYNC.
Reorganize some code paths to implement this behavior.
* tests/check/generic/sinks.c: (send_eos), (GST_START_TEST),
(gst_sinks_suite):
Add unit test to verify above EOS fix.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_event),
(gst_base_sink_get_position):
Don't try to preroll non-async elements after a flush.
Subtract latency form clock times when reporting position.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_query_latency),
(gst_base_sink_event), (gst_base_sink_query),
(gst_base_sink_change_state):
Simplify latency query.
When not synchronizing, we can report latency without querying the peer
element.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_preroll_queue_flush),
(gst_base_sink_event), (gst_base_sink_change_state):
Sinks that don't preroll can always be queried for the latency.
Don't post ASYNC start when we are not async.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_init),
(gst_base_sink_preroll_queue_flush), (gst_base_sink_commit_state),
(gst_base_sink_wait_preroll), (gst_base_sink_needs_preroll),
(gst_base_sink_set_flushing), (gst_base_sink_query),
(gst_base_sink_change_state):
Latency query is allowed after we are prerolled. Introduce a new flag
for this and stop abusing other variables.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_preroll_queue_flush),
(gst_base_sink_wait_preroll), (gst_base_sink_needs_preroll),
(gst_base_sink_query):
Protect eos and have_preroll with the OBJECT lock so we don't need to
take the PREROLL lock when querying the latency. Fixes#473846.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_init), (gst_base_sink_set_sync),
(gst_base_sink_get_sync), (gst_base_sink_set_max_lateness),
(gst_base_sink_get_max_lateness), (gst_base_sink_set_qos_enabled),
(gst_base_sink_is_qos_enabled), (gst_base_sink_set_async_enabled),
(gst_base_sink_is_async_enabled), (gst_base_sink_set_property),
(gst_base_sink_get_property), (gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
Add async property to instruct the sink never to inform the parent about
ASYNC state changes, update docs.
Check argument with g_return_* for the public functions.
API: GstBaseSink::async property
API: gst_base_sink_set_async_enabled()
API: gst_base_sink_is_async_enabled()
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_loop):
Improve debugging.
* libs/gst/base/gstbasesrc.c: (gst_base_src_query_latency),
(gst_base_src_default_query), (gst_base_src_wait),
(gst_base_src_do_sync), (gst_base_src_change_state):
Rearrange some code so that we can add support for measuring the
startup latency.
Original commit message from CVS:
* gst/gstmessage.h:
Add some more docs for the messages.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_query):
Add some more debugging.
* tools/gst-launch.c: (event_loop):
When interrupting, don't try to set pipeline to PAUSED twice.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c:
Don't send an async_start message during downwards state change if target
state is less than READY
Original commit message from CVS:
2007-06-19 Andy Wingo <wingo@pobox.com>
* tests/check/pipelines/simple-launch-lines.c
(test_state_change_returns): Enable pull-mode tests now that
basesink has been fixed.
* libs/gst/base/gstbasesink.c (gst_base_sink_needs_preroll):
Changed from gst_base_sink_is_prerolled, reversing the sense of
the return value. Returns FALSE also if the sink is in pull mode,
in which case it needs no preroll.
(gst_base_sink_query, gst_base_sink_change_state): Update for
needs_preroll change.
(gst_base_sink_change_state): Add a case for READY_TO_PAUSED after
chaining up, in which we return SUCCESS directly if we activated
in pull mode instead of ASYNC. Involves countering an async_start
message sent before chaining up; not sure if this is correct, in
an ideal world we only send async-start when activating in push
mode.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_reset_qos),
(gst_base_sink_render_object), (gst_base_sink_get_position):
Add two breaks thats where missing.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c:
(gst_base_sink_queue_object_unlocked), (gst_base_sink_event):
Fix leak caused when refusing newsegment after EOS.
* plugins/elements/gstfakesink.c: (gst_fake_sink_class_init),
(gst_fake_sink_init), (gst_fake_sink_set_property),
(gst_fake_sink_get_property), (gst_fake_sink_preroll),
(gst_fake_sink_render), (gst_fake_sink_change_state):
* plugins/elements/gstfakesink.h:
Add num-buffers property to make the element generate EOS after a
configurable amount of buffers.
API: fakesink::num-buffers property.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Fix GstBus leak in test.
Test for fakesink num-buffers.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c:
(gst_base_sink_queue_object_unlocked), (gst_base_sink_event),
(gst_base_sink_change_state):
Don't accept anything after an EOS, return UNEXPECTED instead.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Unit test for new EOS behaviour.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_flushing),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek),
(gst_base_src_default_event), (gst_base_src_unlock_stop),
(gst_base_src_deactivate):
* libs/gst/base/gstbasesrc.h:
Add ::unlock_stop to basesrc and basesink. This allows an opportunity
for sub-classes to correctly clear any state they set trying to
unlock, such as clearing out unlock commands from a command fd.
* plugins/elements/gstfdsink.c: (gst_fd_sink_class_init),
(gst_fd_sink_render), (gst_fd_sink_unlock),
(gst_fd_sink_unlock_stop):
* plugins/elements/gstfdsrc.c: (gst_fd_src_class_init),
(gst_fd_src_init), (gst_fd_src_unlock), (gst_fd_src_unlock_stop),
(gst_fd_src_create), (gst_fd_src_get_size), (gst_fd_src_do_seek):
Implement unlock_stop in fdsrc and fdsink.
Implement seeking in fdsrc when a seekable fd is passed, as in
gst-launch-0.10 fdsrc ! ... ! xvimagesink < /path/to/file
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
Add new element field and method.
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_recalc_state), (gst_bin_get_state_func),
(gst_bin_element_set_state), (gst_bin_change_state_func),
(gst_bin_continue_func), (bin_bus_handler),
(bin_push_state_continue), (bin_handle_async_start),
(bin_handle_async_done), (gst_bin_handle_message_func):
Make async state changes a bit smarter by using new ASYNC_START and
ASYNC_DONE messages. This reduces the number of times we run the state
recalculation thread.
Don't change state of element with a pending ASYNC_START message.
Deprecate STATE_DIRTY messages.
* gst/gstelement.c: (gst_element_init), (gst_element_send_event),
(gst_element_get_state_func), (gst_element_continue_state),
(gst_element_lost_state), (gst_element_set_state_func),
(gst_element_change_state):
* gst/gstelement.h:
Keep the state that was last set by the app in a new element field.
Don't allow state changes when handling an element event.
Post ASYNC_START and ASYNC_DONE messages.
Change lost_state so that we go to PAUSED and wait for the parent to set
us to PLAYING again (so latency calculation can be performed)
Export gst_element_change_state() method so that subclasses can use it.
API: gst_element_change_state()
API: GST_STATE_TARGET
* gst/gstpipeline.c: (gst_pipeline_class_init),
(reset_stream_time), (gst_pipeline_change_state),
(gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time):
Using the new ASYNC_START message we can reset the base_time when
needed. This can then be used to implement base_time redistribution in
flushing seeks so that we can remove the explicit seek handling.
Perform latency query and configuration when going to PLAYING.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_query), (gst_base_sink_change_state):
Post new ASYNC_START/ASYNC_DONE messages.
* tests/check/generic/sinks.c: (GST_START_TEST):
Fix test because the bin will not set the async element to PLAYING right
away.
* tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST):
Make the message check a little stronger.
Handle ASYNC messages.
* tests/check/pipelines/cleanup.c: (GST_START_TEST):
* tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST):
Expect ASYNC_DONE messages.
Original commit message from CVS:
* docs/design/draft-latency.txt:
Small update.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_get_latency), (gst_base_sink_query_latency),
(gst_base_sink_wait_clock), (gst_base_sink_send_qos),
(gst_base_sink_perform_qos), (gst_base_sink_queue_object_unlocked),
(gst_base_sink_chain_unlocked), (gst_base_sink_send_event),
(gst_base_sink_get_position), (gst_base_sink_query),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
API: gst_base_sink_query_latency() to let subclasses query the upstream
latency.
API: gst_base_sink_get_latency() to let subclasses query the configured
latency in the sink.
Implement query and set latency.
Update some docs.
As spotted by Will Newton <will dot newton at gmail dot com>: Make sure we
don't continue preroll when we are flushing. Fixes#405284.
* tests/check/pipelines/stress.c: (change_state_timeout),
(quit_timeout), (GST_START_TEST), (stress_suite):
Test for #405284.
Original commit message from CVS:
2007-01-12 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasetransform.c (gst_base_transform_activate):
Factor start/stop into this private function instead of partially
in activate functions and partially in the change_state function.
Fixes setup before the element has changed from READY->PAUSED, as
is the case in pull-mode pipelines.
(gst_base_transform_sink_activate_push)
(gst_base_transform_src_activate_pull): Refactor to use
gst_base_transform_activate().
(gst_base_transform_change_state): Removed, not needed any more.
* libs/gst/base/gstbasesink.c (gst_base_sink_negotiate_pull):
Truncate before fixating.
Original commit message from CVS:
2007-01-12 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasesink.c (gst_base_sink_negotiate_pull):
Don't set_caps() if the result of fixating is ANY, as it's not
supported, and not necessary in the case of a link with no
template caps on either side. Fixes tests/check/libs/basesrc in
some pull-mode tests.
Original commit message from CVS:
2007-01-12 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasetransform.c (_GstBaseTransformPrivate):
(gst_base_transform_init, gst_base_transform_sink_activate_push)
(gst_base_transform_src_activate_pull):
Track the activation mode.
(gst_base_transform_setcaps): In pull mode, when activating the
src pad, after activating the sink pad, activate the sink pad's
peer, as discussed in part-negotiation.txt.
* libs/gst/base/gstbasesrc.h:
* libs/gst/base/gstbasesrc.c (gst_base_src_fixate): Add fixate
vmethod, as in basesink.
* libs/gst/base/gstbasesink.h: Reformat docs, add fixate vmethod.
* libs/gst/base/gstbasesink.c (gst_base_sink_pad_setcaps): In pull
mode, first proxy the setcaps to the peer pad.
(gst_base_sink_pad_fixate): Add a fixate function that calls the
new fixate vmethod.
(gst_base_sink_default_activate_pull): Rename from
gst_base_sink_activate_pull.
(gst_base_sink_negotiate_pull): New function, performs negotiation
in pull mode before calling ::activate_pull().
(gst_base_sink_pad_activate_pull): Actually call the activate_pull
vmethod instead of the default implementation. I have no idea how
this worked before. Negotiate before calling activate_pull.
Original commit message from CVS:
2007-01-06 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasesink.h: New GstBaseSinkClass vmethod,
activate_pull(), providing for a way to specialize the process of
spawning a thread to pull on the sink pad. There is a default
implementation.
* libs/gst/base/gstbasesink.c (gst_base_sink_pad_activate_pull)
(gst_base_sink_pad_activate_push, gst_base_sink_pad_activate)
(gst_base_sink_init): Renamed pad activation functions (inserting
"_pad" in their names). Refactor to use the new activate_pull
vmethod, as appropriate.
(gst_base_sink_class_init, gst_base_sink_activate_pull): Set the
default activate_pull function to start a task pulling from the
sink pad, as before.
Original commit message from CVS:
* gst/gstelement.h:
Clarify _NO_PREROLL a bit more.
* gst/gstevent.c:
Fix docs.
* gst/gstpad.c: (gst_pad_link_check_hierarchy),
(gst_pad_get_caps_unlocked), (gst_pad_save_thyself),
(handle_pad_block), (gst_pad_push_event), (gst_pad_send_event):
Patch by: Yves Lefebvre <ivanohe at abacom dot com> Fix possible deadlock
due to wrong locking order. Fixes#361769.
Remove some redundant/misplaced checks in pad_block.
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_position):
For negative rates, count backwards from the duration.
Original commit message from CVS:
2006-10-09 Zaheer Abbas Merali <zaheerabbas at merali dot org>
Patch by: Josep Torre Valles <josep@fluendo.com>
* common/m4/gst-error.m4:
Disable warning of statement not reached on Forte.
* gst/gstmessage.h:
Fix warning on Forte (value doesn't fit on enumeration).
* libs/gst/base/gstbasesink.c: (gst_base_sink_chain_unlocked):
Fix warning on Forte (value doesn't fit on enumeration).
* libs/gst/net/gstnetclientclock.c: (gst_net_client_clock_thread):
DEBUG macro says it takes minimum of 2 args and so Forte
complains about the use with just 1 arg.
* plugins/elements/gstfdsink.c:
* plugins/elements/gstfdsrc.c:
* plugins/elements/gstfilesink.c:
* plugins/elements/gstfilesrc.c:
Use correct return type for the uri handler implementations.
All these fix warnings in Forte. Fixes bug #360860.
Original commit message from CVS:
* docs/random/moving-plugins:
Make it clear that the "compiled-in descriptions" really mean
the element details.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_wait_preroll):
Update docs.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesrc.c: (gst_base_src_wait_playing),
(gst_base_src_get_range), (gst_base_src_activate_push):
* libs/gst/base/gstbasesrc.h:
Added function to block while waiting for PLAYING, this function
is used by live sources that block on the clock.
API: gst_base_src_wait_playing()
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_wait_preroll), (gst_base_sink_do_sync),
(gst_base_sink_preroll_object):
Make sure that our internal state is correct when we commit our state
asynchronously. This solves a race where a state change to PLAYING
could cause the sink to remain blocked in preroll in some situations.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_wait_preroll),
(gst_base_sink_do_sync):
* libs/gst/base/gstbasesink.h:
Expose logic to wait for preroll so that subclasses such as audiosink
can also use this method.
API: gst_base_sink_wait_preroll()
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times):
Inform GstSegment of the last stop position in order for the current
segment to have a proper duration if it doesn't have a specific stop
position from which a duration could be calculated.
This bug was noticeable when a non-flushing, non-update new segment was
followed by another segment (all buffers from the new segment were being
dropped).
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_preroll_object),
(gst_base_sink_loop), (gst_base_sink_get_position):
When operating in pull mode update the offset so that we
read sequentially.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_configure_segment),
(gst_base_sink_preroll_object), (gst_base_sink_get_position):
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc):
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_event):
Don't randomly and silently reset a segment when the format
changes as this is a bug somewhere upstream. Fixes#330379.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_position):
Don't report POSITION based on clock time if sync is
disabled in a sink.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_configure_segment):
Add applied_rate to the debug
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek):
Copy applied_rate into the outgoing NEWSEGMENT event
Original commit message from CVS:
Patch by: Philippe Rouquier <philippero at libertysurf dot fr>
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_flushing),
(gst_base_sink_change_state):
call ::unlock before taking the PREROLL_LOCK so we can safely
handle elements that lock in ::render.
Fixes#340174.
Original commit message from CVS:
* docs/design/part-overview.txt:
Make upsteam/downstream concepts more clear.
Give an example of serialized/non-serialized events.
* docs/design/part-events.txt:
* docs/design/part-streams.txt:
Mention applied_rate.
* docs/design/part-trickmodes.txt:
Mention applied rate, flesh out some more use cases.
* gst/gstevent.c: (gst_event_new_new_segment),
(gst_event_parse_new_segment), (gst_event_new_new_segment_full),
(gst_event_parse_new_segment_full), (gst_event_new_tag),
(gst_event_parse_tag), (gst_event_new_buffer_size),
(gst_event_parse_buffer_size), (gst_event_new_qos),
(gst_event_parse_qos), (gst_event_parse_seek),
(gst_event_new_navigation):
* gst/gstevent.h:
Add applied_rate field to NEWSEGMENT event.
API: gst_event_new_new_segment_full()
API: gst_event_parse_new_segment_full()
* gst/gstsegment.c: (gst_segment_init), (gst_segment_set_seek),
(gst_segment_set_newsegment), (gst_segment_set_newsegment_full),
(gst_segment_to_stream_time), (gst_segment_to_running_time):
* gst/gstsegment.h:
Add applied_rate to GstSegment structure.
Make calculation of stream_time and running_time more correct
wrt rate/applied_rate.
Add some more docs.
API: GstSegment::applied_rate field
API: gst_segment_set_newsegment_full();
* libs/gst/base/gstbasesink.c: (gst_base_sink_configure_segment),
(gst_base_sink_get_sync_times), (gst_base_sink_get_position):
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer):
Parse and use applied_rate in the GstSegment field.
* tests/check/gst/gstevent.c: (GST_START_TEST):
Add check for applied_rate field.
* tests/check/gst/gstsegment.c: (GST_START_TEST),
(gstsegments_suite):
Add more checks for various GstSegment operations.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_do_sync), (gst_base_sink_chain_unlocked),
(gst_base_sink_get_position), (gst_base_sink_change_state):
Store the sync time of the buffer end position separatly in a
new variable eos_rtime so we can properly sync the EOS event.
Fixes#340697.
Fix the docs for gst_base_sink_set_qos_enabled().
Don't set segment start to invalid value when we receive a
non TIME newsegment.
get closer to handling position reporting for negative rates
correctly.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_event):
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_base_init),
(gst_collect_pads_is_collected), (gst_collect_pads_event):
more detailed debug and formatting cleanup
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_is_too_late),
(gst_base_sink_do_render_stats), (gst_base_sink_render_object),
(gst_base_sink_get_position), (gst_base_sink_change_state):
When frame dropping is enabled, we should not ignore frames
without a duration.
Update some documentation.
Original commit message from CVS:
* gst/gstsegment.c:
Added some more docs.
* libs/gst/base/gstbasesink.c: (gst_base_sink_perform_qos),
(gst_base_sink_reset_qos):
Calculate more accurate rate values.
Original commit message from CVS:
* gst/gst_private.h:
add a new #ifdef to use __declspec(dllimport) only for
other modules and not for gstreamer core
* gst/gstbasesink.c: (gst_base_sink_perform_qos):
use gst_guint64_to_gdouble for conversion
* win32/common/libgstreamer.def:
add new exported functions
* win32/vs6/gst_inspect.dsp:
* win32/vs6/gst_launch.dsp:
* win32/vs6/libgstbase.dsp:
* win32/vs6/libgstcontroller.dsp:
* win32/vs6/libgstcoreelements.dsp:
* win32/vs6/libgstdataprotocol.dsp:
* win32/vs6/libgstnet.dsp:
update project files
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times):
Be a bit nicer to badly behaving upstream elements that expect
us to deal with non TIME segments and timestamps (such as fakesrc
in the testsuite).
Original commit message from CVS:
* gst/gstbus.c:
Small documentation clarification about the signal watch.
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times),
(gst_base_sink_wait_clock), (gst_base_sink_do_sync),
(gst_base_sink_perform_qos), (gst_base_sink_reset_qos),
(gst_base_sink_do_render_stats), (gst_base_sink_render_object),
(gst_base_sink_get_position_last),
(gst_base_sink_get_position_paused), (gst_base_sink_change_state):
Convert and store timestamps in stream time and running time, the
raw timestamps are not usefull, also document this better.
Use different window sizes for good and bad QoS observations so
we react to badness a little quicker.
Keep track of the amount of rendered and dropped buffers.
Send QoS timestamps in running time.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer):
Compare QoS timestamps against running time.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* gst/gsttaglist.c:
* libs/gst/base/gstbasesink.c:
* libs/gst/base/gstbasesink.h:
* libs/gst/base/gstbasesrc.c:
* libs/gst/base/gstbasesrc.h:
Documentation updates. Make BaseSink and BaseSrc docs contain the
class structure so that people can actually see the prototypes for
virtual functions they're supposed to be overriding.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_init),
(gst_base_sink_finalize), (gst_base_sink_set_qos_enabled),
(gst_base_sink_is_qos_enabled), (gst_base_sink_do_sync),
(gst_base_sink_record_qos_observation),
(gst_base_sink_perform_qos), (gst_base_sink_reset_qos),
(gst_base_sink_is_too_late), (gst_base_sink_render_object),
(gst_base_sink_change_state):
More QoS measurements as described in the design doc.
Get rid of ringbuffer with observations, running average is
more simple and equally good.
Calculates valid proportion now.
Added beginning of flood measurement.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_init), (gst_base_sink_finalize),
(gst_base_sink_set_qos_enabled), (gst_base_sink_is_qos_enabled),
(gst_base_sink_set_property), (gst_base_sink_get_property),
(gst_base_sink_commit_state), (gst_base_sink_get_sync_times),
(gst_base_sink_wait_clock), (gst_base_sink_do_sync),
(gst_base_sink_add_qos_observation), (gst_base_sink_send_qos),
(gst_base_sink_perform_qos), (gst_base_sink_reset_qos),
(gst_base_sink_is_too_late), (gst_base_sink_render_object),
(gst_base_sink_preroll_object), (gst_base_sink_event),
(gst_base_sink_chain_unlocked), (gst_base_sink_get_position_last),
(gst_base_sink_get_position_paused), (gst_base_sink_get_position),
(gst_base_sink_query), (gst_base_sink_change_state):
Decouple max-lateness and the fact that QoS messages are generated
with a new property (qos).
Add vmethod so subclasses can be notified of ASYNC playing
state changes.
Collect timestamp start and stop to report better current
position in EOS/PLAYING/PAUSED/READY/NULL.
Refactor QoS/frame dropping and other measurements.
API: GstBaseSrc::qos
* libs/gst/base/gstbasesink.h:
Added Private struct.
API: gst_base_sink_set_qos_enabled
API: gst_base_sink_is_qos_enabled
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_configure_segment),
(gst_base_sink_get_sync_times), (gst_base_sink_wait_clock),
(gst_base_sink_do_sync), (gst_base_sink_do_qos):
Better debug info when we receive a segment event.
Reorganize a bit so we can pass the get_times() results around.
Use the segment format when calculating the running time.
Don't do QoS is sync is disabled or we have no clock or the
element does not want us to sync to the clock.
Don't drop buffers if QoS is disabled for now.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_sync_times):
Can't use gst_segment_to_running_time() when the segment
is not in GST_TIME_FORMAT (like with filesink, for example).
Stops flac encoding pipelines from spewing critical warnings
at EOS (#331248).
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_do_sync),
(gst_base_sink_do_qos):
Separate QoS calculation.
Only drop buffers when lateness is bigger than the
duration of the buffer.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_init),
(gst_base_sink_do_sync):
Small cleanups.
Use QOS debug category.
Original commit message from CVS:
* gst/gstclock.c: (gst_clock_entry_new),
(gst_clock_id_compare_func), (gst_clock_id_wait),
(gst_clock_id_wait_async), (gst_clock_id_unschedule),
(gst_clock_init), (gst_clock_get_internal_time),
(gst_clock_set_master), (do_linear_regression),
(gst_clock_add_observation), (gst_clock_set_property):
* gst/gstclock.h:
Review docs.
Small cleanups.
Fix a possible segfault when the window-size is made smaller.
Calculate jitter before performing the clock wait. Ideally
the clock implementation should calculate jitter but we need
API breakage for that.
* gst/gstsystemclock.c: (gst_system_clock_init):
Docs review.
* libs/gst/base/gstbasesink.c: (gst_base_sink_do_sync):
Remove leftover else
* tests/check/gst/gstsystemclock.c: (GST_START_TEST),
(gst_systemclock_suite):
Added check to test GST_CLOCK_DIFF.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
Added basesink new methods.
* gst/gstevent.c:
* gst/gstevent.h:
Docs updates. Flesh out the QoS docs.
* libs/gst/base/gstadapter.c:
Small doc clarification about ownership and flushing.
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_sync),
(gst_base_sink_get_sync), (gst_base_sink_set_max_lateness),
(gst_base_sink_get_max_lateness), (gst_base_sink_set_property),
(gst_base_sink_get_property), (gst_base_sink_do_sync):
* libs/gst/base/gstbasesink.h:
Added new methods to allow subclass to control max-lateness
and sync.
Generate very basic QoS events based on last sync observation.
Updated docs, fix typo, added some QoS blurb.
* libs/gst/base/gstbasesrc.c:
Remove obsolete _get_state() calls from docs.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_init), (gst_base_sink_set_property),
(gst_base_sink_get_property), (gst_base_sink_do_sync):
* libs/gst/base/gstbasesink.h:
Make max-lateness a property.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_wait_clock),
(gst_base_sink_do_sync), (gst_base_sink_render_object):
Don't ever draw a frame that is >10ms late.
Original commit message from CVS:
2006-02-07 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstcollectpads.c (gst_collect_pads_chain): Only
update last_stop if we're in TIME format and the timestamp is
valid.
* libs/gst/base/gstcollectpads.c (gst_collect_pads_event)
* libs/gst/base/gstbasetransform.c (gst_base_transform_eventfunc):
* libs/gst/base/gstbasesink.c (gst_base_sink_configure_segment):
If we get a new newsegment with a different format, adapt
accordingly.
* gst/gstclock.c (gst_clock_set_calibration): Accept a numerator
of 0. Not a problem, really.
Original commit message from CVS:
2006-02-07 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasesink.c (gst_base_sink_chain_unlocked): Only
warn if sync=true.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_do_sync),
(gst_base_sink_render_object),
(gst_base_sink_queue_object_unlocked):
Only keep track of prerollable items when we are
prerolling.
Before rendering after preroll, always check if we
have queued items.
Added some more debugging.
Original commit message from CVS:
* docs/design/part-element-sink.txt:
Updated document.
* libs/gst/base/gstbasesink.c: (gst_base_sink_init),
(gst_base_sink_finalize), (gst_base_sink_preroll_queue_flush),
(gst_base_sink_configure_segment), (gst_base_sink_commit_state),
(gst_base_sink_get_sync_times), (gst_base_sink_wait_clock),
(gst_base_sink_do_sync), (gst_base_sink_render_object),
(gst_base_sink_preroll_object),
(gst_base_sink_queue_object_unlocked),
(gst_base_sink_queue_object), (gst_base_sink_event),
(gst_base_sink_chain_unlocked), (gst_base_sink_chain),
(gst_base_sink_loop), (gst_base_sink_activate_pull),
(gst_base_sink_get_position), (gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
Totally refactored matching the design doc.
Use two segments, one to clip incomming buffers and another to
perform sync.
Handle queueing correctly, bypass the queue when playing.
Make EOS cancelable.
Handle errors correctly when operating in pull based mode.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Added new check for sinks.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_init),
(gst_base_sink_preroll_queue_empty), (gst_base_sink_commit_state),
(gst_base_sink_handle_object), (gst_base_sink_event),
(gst_base_sink_is_prerolled), (gst_base_sink_wait),
(gst_base_sink_do_sync), (gst_base_sink_handle_event),
(gst_base_sink_handle_buffer), (gst_base_sink_set_flushing),
(gst_base_sink_deactivate), (gst_base_sink_activate),
(gst_base_sink_activate_pull), (gst_base_sink_get_position),
(gst_base_sink_query), (gst_base_sink_change_state):
Basesink cleanups, remove some old code.
Handle the case where a subclass can preroll in the render
method (mostly audiosinks).
Handle more events.
Remove some locks around variables that are now protected
with the PREROLL_LOCK (clock_id, flushing, ..).
Optimize position query some more, do correct locking.
Remove old code to push queue in state change, this is not
needed anymore since preroll blocks on all prerollable items
now.
Almost implemented as described in design doc.
Original commit message from CVS:
2006-01-25 Julien MOUTTE <julien@moutte.net>
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_position):
We only query position using the clock in the playing state.
Query peer in the other cases.
* win32/common/config.h: Updates.
Original commit message from CVS:
* gst/gstsystemclock.c: (gst_system_clock_id_wait_unlocked):
A clock entry that is scheduled for the exact time of the
clock is still in time.
* libs/gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_do_sync):
Add some more debug info.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_element_set_state):
* gst/gstclock.c: (gst_clock_id_wait):
Added some more debug info.
* libs/gst/base/gstadapter.c:
Added more docs.
* libs/gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_do_sync), (gst_base_sink_chain):
Added some comments.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_do_sync):
Some cleanups.
When the sink finishes blocking on the preroll buffer, it can
immediatly render it instead of rendering when the next buffer
arrives.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_property),
(gst_base_sink_get_property), (gst_base_sink_do_sync),
(gst_base_sink_chain):
Small cleanups.
GST_ELEMENT_CLOCK and sync are protected with LOCK.
Don't store _last_stop if the buffer is dropped.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_position):
Take current playback rate into account when reporting
the position.
Original commit message from CVS:
* gst/gstbuffer.c:
Small docs update.
* gst/gstcaps.c: (gst_caps_is_equal):
Don't assert on NULL <--> X. Fixes#323260
* gst/gstminiobject.c: (gst_mini_object_replace):
If we're doing atomic operations, we might just as well use
the proper way to get an atomic pointer.
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_position):
Clean up debugging.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_event), (gst_base_sink_do_sync),
(gst_base_sink_activate_pull), (gst_base_sink_change_state):
Properly handle non GST_FORMAT_TIME segment
* gst/elements/gstidentity.c: (gst_identity_transform_ip):
Properly handle non GST_FORMAT_TIME segment
* gst/gstsegment.c:
This function is valid if the accumulator is 0 and the format
is different from the requested format.
Original commit message from CVS:
2005-11-24 Michael Smith <msmith@fluendo.com>
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
Unlock the PREROLL_LOCK in a failure case.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_wait), (gst_base_sink_do_sync),
(gst_base_sink_handle_event):
* gst/base/gstbasesink.h:
No need to store the clock, the parent element class already
has it.
* gst/gstbin.c: (gst_bin_set_clock_func), (gst_bin_add_func):
Updates for clock_set returning a gboolean
* gst/gstclock.c: (gst_clock_entry_new), (gst_clock_id_wait),
(gst_clock_id_wait_async), (gst_clock_class_init),
(gst_clock_init), (gst_clock_finalize),
(gst_clock_get_internal_time), (gst_clock_get_time),
(gst_clock_slave_callback), (gst_clock_set_master),
(gst_clock_get_master), (do_linear_regression),
(gst_clock_add_observation), (gst_clock_set_property),
(gst_clock_get_property):
* gst/gstclock.h:
Implement master/slave. When setting a clock as a slave, a
periodic timeout is scheduled to sample master and slave times.
Then the slave clock is recalibrated to match offset and rate
of the master clock.
Update logging a bit.
Add flag so that a clock can state that is cannot be slaved to
another clock.
* gst/gstelement.c: (gst_element_set_clock):
* gst/gstelement.h:
The set_clock returns a gboolean for when an element cannot
deal with the selected clock in the pipeline.
* gst/gstpipeline.c: (gst_pipeline_change_state),
(gst_pipeline_set_clock):
* gst/gstpipeline.h:
Handle the case where the selected clock cannot be set on
the pipeline.
* gst/net/gstnetclientclock.c: (gst_net_client_clock_class_init),
(gst_net_client_clock_init), (gst_net_client_clock_finalize),
(gst_net_client_clock_set_property),
(gst_net_client_clock_get_property),
(gst_net_client_clock_observe_times):
* gst/net/gstnetclientclock.h:
Use regression code in GstClock parent, remove duplicated
functionality.
Original commit message from CVS:
2005-11-22 Andy Wingo <wingo@pobox.com>
* gst/gstevent.h (gst_event_new_new_segment)
(gst_event_parse_new_segment, gst_event_new_buffer_size)
(gst_event_parse_buffer_size, gst_ghost_pad_new_no_target):
Renamed from *_newsegment, *_buffersize, *_notarget.
* scripts/update-funcnames: New script, performs the changes
listed above.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
Make sure the GstFlowReturn is returned.
* gst/gstbus.c: (gst_bus_add_signal_watch_full),
(gst_bus_add_signal_watch):
* gst/gstbus.h:
add gst_bus_add_signal_watch_full.
* gst/gstplugin.c: (gst_plugin_load_file):
Small style cleanup.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* check/gst/gstevent.c (create_custom_events): Check that
FLUSH_STOP is serialized.
* check/elements/identity.c (event_func):
* check/elements/fakesrc.c (event_func): No stream lock, the core
takes it.
* gst/base/gstbasetransform.c (gst_base_transform_event): No more
stream lock taking, yay.
* gst/gstevent.h (GST_EVENT_FLUSH_STOP): Marked as serialized to
ensure that core takes the stream lock.
* gst/base/gstbasesrc.c (gst_base_src_do_seek): Update for stream
lock name change.
* gst/base/gstbasesink.c (gst_base_sink_event): No need to take
the stream lock for EOS, NEWSEGMENT, or FLUSH_STOP, the core does
it already. For the flush start we do take it though so we get the
right preroll state change messages.
* gst/gstqueue.c (gst_queue_sink_activate_push): No need to take
the stream lock here, the core does it for us.
* gst/gstpad.h (GST_PAD_GET_STREAM_LOCK): Renamed from
GST_STREAM_GET_LOCK.
(GST_PAD_STREAM_LOCK, GST_PAD_STREAM_TRYLOCK)
(GST_PAD_STREAM_UNLOCK, GST_PAD_STREAM_UNLOCK_FULL)
(GST_PAD_STREAM_LOCK_FULL): Renamed from GST_STREAM_*.
(GST_PAD_GET_PREROLL_LOCK): Renamed from GST_PREROLL_GET_LOCK.
(GST_PAD_PREROLL_LOCK, GST_PAD_PREROLL_TRYLOCK)
(GST_PAD_PREROLL_UNLOCK): Renamed from GST_PREROLL_*.
* gst/gstpad.c: Update for stream lock name change.
* gst/base/gstbasesink.c: Update for preroll lock name change.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* *.h:
* *.c: Ran scripts/update-macros. Oh yes.
* gst/gstobject.h (GST_OBJECT_GET_LOCK, GST_OBJECT_LOCK)
(GST_OBJECT_TRYLOCK, GST_OBJECT_UNLOCK): Renamed from
GST_GET_LOCK, etc.
* scripts/update-macros: New script. Run it on your files to
change GST_LOCK to GST_OBJECT_LOCK, and the same for UNLOCK as
well.
Original commit message from CVS:
* check/gst/gstvalue.c: (GST_START_TEST), (gst_value_suite):
Add a deserialisation test for fractions
* examples/metadata/read-metadata.c: (message_loop),
(make_pipeline), (main):
Fix up metadata reading sample.
* gst/base/gstbasesink.c: (gst_base_sink_do_sync):
Debug format fix
* gst/base/gstbasesrc.c: (gst_base_src_default_negotiate):
Don't try and fixate empty caps
* gst/gst_private.h:
Wrap in G_BEGIN_DECLS/G_END_DECLS
* gst/gstvalue.c: (gst_value_collect_fraction),
(gst_value_set_fraction), (gst_value_get_fraction_denominator),
(gst_value_transform_string_fraction),
(gst_value_compare_fraction):
Add some extra guards to ensure that we don't end up
with an invalid denominator of 0 in a gstfraction and
that fractions always get reduced.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_get_position):
For the current position in stream time, we need to subtract
accumulated time.
* gst/gstsystemclock.c: (gst_system_clock_async_thread):
Release lock before calling the callback function of async
entries.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
0 segment values are 0 in any format.
* gst/base/gstbasetransform.c: (gst_base_transform_event):
* gst/base/gstbasetransform.h:
Parse newsegment correctly in basetransform
* gst/elements/gstidentity.c: (gst_identity_transform_ip):
Sync to clock using updated segment values.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_do_sync):
Don't sync on buffers that fall partially outside our current
segment. Prevents an assertion failure/abort playing some files.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_do_sync):
* gst/base/gstbasesrc.c: (gst_base_src_wait),
(gst_base_src_do_sync), (gst_base_src_get_range):
Implement clock sync in base class.
Original commit message from CVS:
2005-11-09 Andy Wingo <wingo@pobox.com>
* gst/base/gstbasesink.c: Add the beginning of docs here -- have
to work on something else now tho...
Original commit message from CVS:
* check/states/sinks.c: (GST_START_TEST):
Uncomment fixed check.
* docs/design/part-TODO.txt:
Updated TODO.
* gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_handle_object), (gst_base_sink_do_sync),
(gst_base_sink_get_position):
If we are going to PLAYING, post the right pending state
when we post the intermediate paused message.
* gst/gstelement.c: (gst_element_continue_state),
(gst_element_set_state_func), (gst_element_change_state):
Don't post state changes that were between the same state
and were not ASYNC.
Original commit message from CVS:
* check/states/sinks.c: (GST_START_TEST), (gst_object_suite):
Added some more checks. Specifically the case where NO_PREROLL
elements are in the pipeline.
* gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_handle_object), (gst_base_sink_do_sync),
(gst_base_sink_get_position):
Post READY->PAUSED state change messages too.
Fix bug where VOID was posted as pending state...
* gst/gstbin.c: (gst_bin_recalc_state):
use _element_continue_state() to continue the state change.
* gst/gstelement.c: (gst_element_continue_state),
(gst_element_commit_state), (gst_element_set_state_func),
(gst_element_change_state), (gst_element_change_state_func):
Lots of state change cleanups, assign the STATE_RETURN in
a new continue_state() function that also propagates the
last return value from a state change to the app.
Update some debug statements with proper category.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_do_sync), (gst_base_sink_get_position):
Some more debugging.
* gst/base/gstbasetransform.c: (gst_base_transform_finalize),
(gst_base_transform_init), (gst_base_transform_buffer_alloc),
(gst_base_transform_event), (gst_base_transform_getrange),
(gst_base_transform_chain):
* gst/base/gstbasetransform.h:
Fix debugging,
Protect transform and concurrent buffer alloc with a new lock.
Try not to break ABI/API.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_get_position):
Don't use invalid stream_time.
* gst/gstevent.c: (gst_event_new_newsegment):
stream_time in newsegment cannot be undefined.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_get_position), (gst_base_sink_query),
(gst_base_sink_change_state):
Simply set the right flag when going to playing, that's all
we need to do instead of calling a function inside the object
lock (that could take the lock as well and deadlock)
Original commit message from CVS:
* docs/design/part-TODO.txt:
Update TODO
* gst/base/gstbasesink.c: (gst_base_sink_get_position),
(gst_base_sink_query):
Don't use clock time to report position when in EOS.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_get_position),
(gst_base_sink_query):
Speed up current position calculation.
* gst/base/gstbasesrc.c: (gst_base_src_query),
(gst_base_src_default_newsegment):
Correctly set stream position in newsegment.
* gst/gstbin.c: (gst_bin_add_func), (add_to_queue),
(update_degree), (gst_bin_sort_iterator_next),
(gst_bin_sort_iterator_resync), (gst_bin_sort_iterator_free):
* gst/gstmessage.c: (gst_message_new_custom):
Clean up debugging info
* gst/gstqueue.c: (gst_queue_link_src), (gst_queue_chain),
(gst_queue_loop), (gst_queue_handle_src_query):
Pause task faster.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_handle_object), (gst_base_sink_query), (do_playing):
* gst/base/gstbasesrc.c: (gst_base_src_query):
* gst/elements/gstfilesink.c: (gst_file_sink_query):
* gst/elements/gsttypefindelement.c:
(gst_type_find_handle_src_query), (find_element_get_length),
(gst_type_find_element_activate):
API change fix.
* gst/gstquery.c: (gst_query_new_position),
(gst_query_set_position), (gst_query_parse_position),
(gst_query_new_duration), (gst_query_set_duration),
(gst_query_parse_duration), (gst_query_set_segment),
(gst_query_parse_segment):
* gst/gstquery.h:
Bundling query position/duration is not a good idea since duration
does not change much and we don't want to recalculate it for every
position query, so they are separated again..
Base value in segment query is not needed.
* gst/gstqueue.c: (gst_queue_handle_src_query):
* gst/gstutils.c: (gst_element_query_position),
(gst_element_query_duration), (gst_pad_query_position),
(gst_pad_query_duration):
* gst/gstutils.h:
Updates for query API change.
Added some docs here and there.
Original commit message from CVS:
* check/Makefile.am:
* check/pipelines/stress.c: (GST_START_TEST),
(simple_launch_lines_suite), (main):
Small state change torture test.
* docs/design/part-states.txt:
* gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_handle_object), (gst_base_sink_event), (do_playing),
(gst_base_sink_change_state):
Never take state lock from streaming thread, clean up ugly
hacks. Unfortunatly core does not yet support nice ways to
async commit state.
* gst/gstbin.c: (gst_bin_remove_func), (gst_bin_recalc_state),
(bin_bus_handler):
Start state recalc if a STATE_DIRTY message is posted, but only
on the toplevel bin.
* gst/gstelement.c: (gst_element_sync_state_with_parent),
(gst_element_get_state_func), (gst_element_abort_state),
(gst_element_commit_state), (gst_element_lost_state),
(gst_element_set_state_func), (gst_element_change_state):
* gst/gstelement.h:
State variables are now protected with the LOCK, the state
lock is only used to serialize _set_state().
Original commit message from CVS:
2005-10-13 Thomas Vander Stichele <thomas at apestaart dot org>
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
* gst/base/gstbasesrc.c: (gst_base_src_get_range):
fix up debugging
* tools/gst-launch.c: (event_loop):
print out clock nicely
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
* gst/base/gstbasesrc.c: (gst_base_src_query):
fix more guint64<->gdouble conversions
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_buffer):
* gst/elements/gstfilesink.c: (gst_file_sink_event),
(gst_file_sink_render):
Some more debugging info.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_change_state):
No need to prerol after receiving EOS.
* gst/elements/gstfakesink.c: (gst_fake_sink_event):
* gst/elements/gstfakesrc.c: (gst_fake_src_event_handler):
* gst/elements/gstidentity.c: (gst_identity_event):
Print events more verbosely.
Original commit message from CVS:
* check/gst/gstevent.c: (GST_START_TEST):
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_change_state):
* gst/base/gstbasesrc.c: (gst_base_src_default_newsegment):
* gst/base/gstbasetransform.c: (gst_base_transform_event):
* gst/elements/gstfilesink.c: (gst_file_sink_event):
* gst/gstevent.c: (gst_event_new_newsegment),
(gst_event_parse_newsegment):
* gst/gstevent.h:
Added extra flag to newsegment for future API freeze.
Updated check and base elements.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_do_sync), (gst_base_sink_handle_buffer):
Prepare for doing QOS.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_preroll_queue_flush),
(gst_base_sink_handle_object), (gst_base_sink_event),
(gst_base_sink_wait), (gst_base_sink_handle_event),
(gst_base_sink_change_state):
* gst/base/gstbasesink.h:
Repost EOS message while going to PLAYING if still EOS.
Make sure that when receiving a FLUSH_START we don't attempt
to sync on the clock anymore.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_change_state):
Only error is an error.
* gst/gstbin.c: (gst_bin_change_state):
Better debugging.
* gst/gstpad.c: (gst_pad_alloc_buffer), (gst_pad_chain):
Also call pad_block in pad alloc.
* gst/gstutils.c: (gst_flow_get_name):
Better debugging.
Original commit message from CVS:
2005-09-26 Andy Wingo <wingo@pobox.com>
* configure.ac:
* tests/Makefile.am:
* tests/memchunk: Remove memchunk benchmark stuff, this is taken
over by GLib bug 118439.
* gst/base/gstbasesink.c (gst_base_sink_wait): Factor out the wait
routines to a function.
* docs/libs/gstreamer-libs-sections.txt: I am a good person today.
* libs/gst/controller/gsthelper.c:
* libs/gst/controller/gstcontroller.h (gst_controller_sync_values)
(gst_object_sync_values): Renamed from sink_values. Ugh.
* libs/gst/controller/gsthelper.c: Update for __gst_controller_key.
* libs/gst/controller/gstcontroller.c (__gst_controller_key):
Renamed from controller_key, as it is exported.
* gst/gstvalue.c (_gst_value_initialize): Fake out the compiler.
Original commit message from CVS:
* docs/README:
* gst/gstpad.c: (gst_pad_class_init), (gst_pad_chain):
* gst/gstpluginfeature.c:
* gst/gstutils.c:
various doc updates
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
change an assert into an error until it gets fixed properly
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_send_event), (gst_base_sink_peer_query),
(gst_base_sink_query):
Prepare for more accurate position reporting and query
handling.
* gst/gstelement.c: (gst_element_send_event),
(gst_element_set_state):
Add some comment.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_init):
Make sync property settable from subclass.
* gst/elements/gstfakesink.c: (gst_fake_sink_init),
(gst_fake_sink_change_state):
Set sync to FALSE by default.
Original commit message from CVS:
2005-09-07 Andy Wingo <wingo@pobox.com>
* gst/base/gstbasesink.c (gst_base_sink_activate_pull): Fix a race
condition whereby the pad's task function is entered before the
pad_mode variable was set.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_pad_buffer_alloc):
Add comment.
* gst/elements/gstfakesink.c: (gst_fake_sink_init),
(gst_fake_sink_change_state):
Make state change function thread-safe.
* gst/gstpad.c: (gst_pad_alloc_buffer):
Set offset on generic buffer allocated by fallback.
Original commit message from CVS:
2005-09-02 Andy Wingo <wingo@pobox.com>
* gst/gstelement.h (GstState): Renamed from GstElementState,
changed to be a normal enum instead of flags.
(GstStateChangeReturn): Renamed from GstElementStateReturn, names
munged to be GST_STATE_CHANGE_*.
(GST_STATE_CHANGE): Renamed from GST_STATE_TRANSITION, updated to
work with the new state representation.
(GstStateChange): New enumeration of possible state transitions.
Replaces GST_STATE_FOO_TO_BAR with GST_STATE_CHANGE_FOO_TO_BAR.
(GstElementClass::change_state): Pass the GstStateChange along as
an argument. Helps language bindings, so they don't have to use
tricky lock-needing macros like GST_STATE_CHANGE ().
* scripts/update-states (file): New script. Run it on a file to
update it for state naming and API changes. Updates files in
place.
* All files updated for the new API.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_event), (gst_base_sink_do_sync),
(gst_base_sink_handle_event):
* gst/base/gstbasesink.h:
Handle newsegments more correctly.
* gst/gstbus.c:
Fix docs.
* gst/gstevent.c: (gst_event_new_newsegment):
A newsegment cannot have a start_time of -1
Original commit message from CVS:
* gst/base/gstadapter.c: (gst_adapter_flush):
Flushing out 0 bytes is ok for this function.
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
no newsegment gives a warning and sets the start/stop to
invalid.
* gst/base/gstbasetransform.c: (gst_base_transform_change_state),
(gst_base_transform_set_passthrough):
Some debug info.
* gst/gstminiobject.c: (gst_mini_object_ref):
Check refcount here too.
* gst/gstpad.c: (gst_pad_init):
Pads are initially flushing and refusing data.
* gst/gstutils.c: (gst_element_link_pads_filtered):
When adding a capsfilter element make sure it has the
same state as the parent bin.
Original commit message from CVS:
2005-08-26 Andy Wingo <wingo@pobox.com>
* check/pipelines/simple_launch_lines.c (run_pipeline): Check
element_set_state's return val.
(test_2_elements): Add test that's been disabled for months.
* gst/elements/gstfakesink.c: Cleanups. Add can-activate-push and
can-activate-pull properties.
* gst/elements/gstfakesrc.c: Cleanups. Add can-activate-push and
can-activate-pull properties. Implement is_seekable so fakesrc can
operate in pull mode.
* gst/base/gstbasesink.c (GstBaseSink): Remove has-loop, has-chain
properties.
(gst_base_sink_activate, gst_base_sink_activate_pull)
(gst_base_sink_activate_push): Make activation mode choosing work.
Cleanups.
(gst_base_sink_chain, gst_base_sink_loop): Assert activation mode
is right. Make pull mode work. Post an eos before pausing in pull
mode.
(gst_base_sink_change_state): Pay attention to the core's
change_state() return val.
* gst/base/gstbasesrc.c (GstBaseSrc): Remove has-loop,
has-getrange properties. Cleanups.
* gst/base/gstbasesrc.h (GstBaseSrc): Remove has_loop,
has_getrange and replace with can_activate_pull and
can_activate_push.
* gst/base/gstbasesink.h (GstBaseSink): Rearrange fields, add
locking comments. Remove has_loop, has_chain and replace with
can_activate_pull and can_activate_push.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
* gst/base/gstbasetransform.c: (gst_base_transform_transform_size),
fix up some debugging
(gst_base_transform_get_unit_size),
(gst_base_transform_buffer_alloc), (gst_base_transform_event),
(gst_base_transform_handle_buffer):
* gst/base/gstbasetransform.h:
handle and store timed NEWSEGMENT events so that subclasses that
calculate time by counting samples have a segment_start time they
need to add to their timestamps - see audioresample
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_get_times), (gst_base_sink_do_sync),
(gst_base_sink_handle_buffer), (gst_base_sink_change_state):
* gst/base/gstbasesink.h:
Handle newsegment events correctly.
Drop buffers out of the segment range.
