This is needed for V4L2_OUTPUT interface, and is harmless of
V4L2_CAPTURE interfaces. This will fix timestamp in cases like:
v4l2src io-mode=dmabuf ! v4l2videoNenc output-io-mode=dmabuf-import ! ...
Same apply for userptr.
https://bugzilla.gnome.org/show_bug.cgi?id=781119
Running `gst-validate-launcher -t validate.file.playback.change_state_intensive.vorbis_vp8_1_webm`
on odroid XU4 (s5p-mfc v4l2 driver) often leads to:
ERROR:../subprojects/gst-plugins-good/sys/v4l2/gstv4l2videodec.c:215:gst_v4l2_video_dec_stop: assertion failed: (g_atomic_int_get (&self->processing) == FALSE)
This happens when the following race happens:
- T0: Main thread
- T1: Upstream streaming thread
- T2. v4l2dec processing thread)
[The decoder is in PAUSED state]
T0. The validate scenario runs `Executing (36/40) set-state: state=null repeat=40`
T1- The decoder handles a frame
T2- A decoded frame is push downstream
T2- Downstream returns FLUSHING as it is already flushing changing state
T2- The decoder stops its processing thread and sets `->processing = FALSE`
T1- The decoder handles another frame
T1- `->process` is FALSE so the decoder restarts its streaming thread
T0- In v4l2dec-> stop the processing thread is stopped
NOTE: At this point the processing thread loop never started.
T0- assertion failed: (g_atomic_int_get (&self->processing) == FALSE)
Here I am removing the whole ->processing logic to base it all on the
GstTask state to avoid duplicating the knowledge.
https://bugzilla.gnome.org/show_bug.cgi?id=778830
Without a specified framerate from the sink, the decoder frame interval
should be set using the framerate of the encoded video stream.
Therefore, the v4l2object should be able to change the framerate on the
output if the V4L2 device accepts it.
This is also necessary for mem2mem encoders so that their bitrate
calculation code may work correctly and they may report the correct
frame duration on the capture queue.
https://bugzilla.gnome.org/show_bug.cgi?id=779466
If the duration of the v4l2object is GST_CLOCK_TIME_NONE, because the
sink did not specify a framerate in the caps and the driver accepts the
framerate, the decoder element uses GST_CLOCK_TIME_NONE to calculate and
set the element latency.
While this is a bug of the capture driver, the decoder element should
not use the invalid duration to calculate a latency, but print a warning
instead.
https://bugzilla.gnome.org/show_bug.cgi?id=779466
The correct behaviour of anything stuck in the ->render() function
between ->unlock() and ->unlock_stop() is to call
gst_base_sink_wait_preroll() and only return an error if this returns an
error, otherwise, it must continue where it left off!
https://bugzilla.gnome.org/show_bug.cgi?id=774945
Update the image size according the amount of data we are going to
read/write. This workaround bugs in driver where the sizeimage provided
by TRY/S_FMT represent the buffer length (maximum size) rather then the expected
bytesused (buffer size).
https://bugzilla.gnome.org/show_bug.cgi?id=775564
Set MAY_BE_LEAKED flag on static pads returned by gst_v4l2_object_get_*_caps()
functions. Made functions thread safe by using g_once_init[enter|leave]
funtions.
https://bugzilla.gnome.org/show_bug.cgi?id=778453
In gst_v4l2_allocator_qbuf(), the memory is referenced after the
buffer is queued. Once queued (VIDIOC_QBUF), the buffer might be handled
by the V4L2 driver (e.g. decoded) and dequeued (gst_v4l2_allocator_dqbuf),
through a different thread, before the memory is referenced (gst_memory_ref).
In this case, in gst_v4l2_allocator_dqbuf(), the memory is unreferenced
(gst_memory_unref) before having been referenced: the memory refcount
reaches 0, and the memory is freed.
So, to avoid this crossing case, in gst_v4l2_allocator_qbuf(), the
memory shall be referenced before the buffer is queued.
https://bugzilla.gnome.org/show_bug.cgi?id=777399
Unlike former definitions of LOG_CAPS, the current implementation simply
expands to GST_DEBUG_OBJECT. The LOG_CAPS macro is rarely used and most
uses duplicate already existing GST_DEBUG_OBJECT lines. Therefore, the
caps are often printed twice which unnecessarily clutters the debug log.
Replace LOG_CAPS calls with GST_DEBUG_OBJECT, remove LOG_CAPS calls, and
delete the definition of LOG_CAPS.
https://bugzilla.gnome.org/show_bug.cgi?id=776899
The buffer memory type provided to the VIDIOC_CREATE_BUFS ioctl shall
be set with the value ("memory") given as input parameter of the
gst_v4l2_allocator_probe() function.
https://bugzilla.gnome.org/show_bug.cgi?id=777327
After commit 1ea9735a I see these error while using the webcam
integrated in my laptop:
GStreamer-CRITICAL **: gst_value_list_get_size: assertion 'GST_VALUE_HOLDS_LIST (value)' failed
The issue is gst_v4l2src_value_simplify() was doing its job of
generating a single value, rather than the original list. That why,
when getting the list size, a critical warning was raised.
This patch takes advantage of the compiler optimizations to verify
first if the list was simplified, thus use it directly, otherwise,
if it is a list, verify its size.
https://bugzilla.gnome.org/show_bug.cgi?id=776106
If for some reason we fail to probe formats (all try_fmt calls fail, for
example), this is not a critical error, but we end up with an empty list
of interlace modes. This causes all subsequent negotiation to fail.
This patch fixes interlace-mode setting to be skipped if we failed to
detect any.
https://bugzilla.gnome.org/show_bug.cgi?id=775702
These can be called from different threads and both manipulate the
pool->buffers array. Lock them properly and let flush_stop move the
array contents into a temporary array on the stack to avoid having
to call release_buffer under the object lock.
https://bugzilla.gnome.org/show_bug.cgi?id=775015
If the pool is inactive, it is guaranteed to also be flushing, so the
following check will return GST_FLOW_FLUSHING anyway.
This can happen if a v4l2src is blocking on DQBUF in create and is sent
an EOS event on another thread. In that case the pool is set to
flushing/inactive without locking, the v4l2src is unblocked, and may
call pool_process with a valid buffer on the already inactive pool.
https://bugzilla.gnome.org/show_bug.cgi?id=775014
I've seen problems where the `bytesused` field of `v4l2_buffer` would be
a silly number causing the later call to:
gst_memory_resize (group->mem[i], 0, group->planes[i].bytesused);
to result in this error to be printed:
(pulsevideo:11): GStreamer-CRITICAL **: gst_memory_resize: assertion 'size + mem->offset + offset <= mem->maxsize' failed
besides causing who-knows what other problems.
We make the assumption that this buffer has still been dequeued correctly
so just clamp to a valid size so downstream elements won't end up in
undefined behaviour.
The invalid `v4l2_buffer` I saw from my capture device was:
buffer = {
index = 0,
type = 1,
bytesused = 534748928, // <- Invalid
flags = 8260, // V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC | V4L2_BUF_FLAG_ERROR | V4L2_BUF_FLAG_DONE
field = 01330, // <- Invalid
timestamp = {
tv_sec = 0,
tv_usec = 0
},
timecode = {
type = 0,
flags = 0,
frames = 0 '\000',
seconds = 0 '\000',
minutes = 0 '\000',
hours = 0 '\000',
userbits = "\000\000\000"
},
sequence = 0,
memory = 2,
m = {
offset = 3537219584,
userptr = 140706665836544, // Could be nonsense, not sure
planes = 0x7ff8d2d5b000,
fd = -757747712
},
length = 2764800,
reserved2 = 0,
reserved = 0
}
This is from gdb with my own annotations added.
This was with gst-plugins-good 1.8.1, a Magewell XI100DUSB-HDMI video
capture device and kernel 3.13 using a dodgy HDMI cable which is great at
breaking HDMI capture devices. I'm using io-mode=userptr and have built
gst-plugins-good without libv4l.
https://bugzilla.gnome.org/show_bug.cgi?id=769765
https://github.com/mesonbuild/meson
With contributions from:
Tim-Philipp Müller <tim@centricular.com>
Jussi Pakkanen <jpakkane@gmail.com> (original port)
Highlights of the features provided are:
* Faster builds on Linux (~40-50% faster)
* The ability to build with MSVC on Windows
* Generate Visual Studio project files
* Generate XCode project files
* Much faster builds on Windows (on-par with Linux)
* Seriously fast configure and building on embedded
... and many more. For more details see:
http://blog.nirbheek.in/2016/05/gstreamer-and-meson-new-hope.htmlhttp://blog.nirbheek.in/2016/07/building-and-developing-gstreamer-using.html
Building with Meson should work on both Linux and Windows, but may
need a few more tweaks on other operating systems.
Both work with autotools but they definitely don't mean the same thing, cause
problems with other build systems, and are bad form. Existence should always be
checked with #ifdef or #if defined.
The type detection would lead to assertion as it would try
to create a device without having found any type for it. It
also didn't detect MPLANE devices properly.
The monitor sets the object->element object as a GstObject. This
works for debug traces, but will assert for ELEMENT_ERROR. This
was the only case where that could happen. Add a check for that.
After switching to using V4L2_CAP_DEVICE_CAPS we lost support for
multiplanar device types. After some research, it looks like
vcap.capabilities treated the multiplanar flag of output and capture
devices equally, but not the new device_caps.
https://bugzilla.gnome.org/show_bug.cgi?id=768195
A typo in gst_v4l2_probe_and_register() caused a build error when building
with --enable-v4l2-probe. Fixing it.
gstv4l2.c: In function 'gst_v4l2_probe_and_register':
gstv4l2.c:150:25: error: 'struct v4l2_capability' has no member named 'capabilitites'
device_caps = vcap.capabilitites;
The same physical device can export multiple devices. In
this case, the capabilities field now contains a union of
all caps available from all exported V4L2 devices alongside
a V4L2_CAP_DEVICE_CAPS flag that should be used to decide
what capabilities to consider. In our case, we need the
ones from the exported device we are using.
https://bugzilla.gnome.org/show_bug.cgi?id=768195
gst_v4l2_clear_error() doesn't work like g_clear_error(), it
doesn't NULLify the pointer, so set freed debug string to NULL
so it doesn't get freed again if gst_v4l2_clear_error() is
called twice on the error.
CID 1362901
Instead of completely getting rid of the input buffer, copy
the metadata, the flags and the timestamp into an empty buffer.
This way the decoder base class can copy that information again
to the output buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=758424
This is to allow returning an error that can easily be sent as
message to the application if the element needs it. Using this
also allow ignoring errors.
https://bugzilla.gnome.org/show_bug.cgi?id=766172
v4l2src will renegotiate only if the format have changed. As of now,
it's not possible to change the allocationw without resetting the
camera. To avoid unwanted side effect, simply keep the old allocation
if no renegotiation is taking place. This fixes assertion and possible
failures in USERPTR or DMABUF import mode (when using downstream pools).
https://bugzilla.gnome.org/show_bug.cgi?id=754042
To change pixel aspect ratio from DAR to PAR, the necessary scaling factor
is DAR/PAR, not DAR*PAR.
For good measure, add debug output similar to the fixed-width and
fixed-height cases.
https://bugzilla.gnome.org/show_bug.cgi?id=766711
Instead of relying on the default colorimetry chosen by
gst_video_info_set_format(), set info.colorimetry from the
values returned by G_FMT. This allows decoders to propagate
their input colorimetry downstream.
https://bugzilla.gnome.org/show_bug.cgi?id=766383
Move the extraction of colorimetry parameters from struct v4l2_format and the
setting of the identity matrix for RGB formats into the function to avoid code
duplication.
https://bugzilla.gnome.org/show_bug.cgi?id=766383
gst_v4l2_probe_caps() returns the coded size, not the visible size. Subtract
the known padding from probed caps with the coded size before using them as
filter for caps negotiation with downstream elements.
https://bugzilla.gnome.org/show_bug.cgi?id=766382
The gst_v4l2_object_acquire_format() function is used by v4l2videodec to obtain
the currently set capture format. Since G_FMT returns the coded size, the
visible size needs to be obtained from the compose rectangle in order to
negotiate it with downstream elements. The G_CROP call hasn't worked on mem2mem
capture queues for a long time. Instead use the G_SELECTION call to obtain the
compose rectangle and only fall back to G_CROP for ancient kernels.
https://bugzilla.gnome.org/show_bug.cgi?id=766381
On modern kernels, the G/S_FMT ioctls will always fail using
V4L2_BUF_TYPE_VIDEO_OVERLAY with VFL_DIR_TX (e.g. real overlay out drivers)
since this is not the intented use (rather rx, according to v4l2 API doc).
Probably this is why the Video Output Overlay interface was created, so if
the driver advertises it we might as well use.
For old kernels (pre 2012) the old way might still work so keeping this for
compatibility.
https://bugzilla.gnome.org/show_bug.cgi?id=761165
Support for the updated V4L2_PIX_FMT_XRGB555 was added in commit
2538fee2fd however, when setting the format
for use in v4l2 ioctls, the old deprecated format is still used. Convert
this to the new accepted format type, as the preferred format.
https://bugzilla.gnome.org/show_bug.cgi?id=767300
v4l2src can cause an "infinite message loop" when a base control exposed as a
property is not provided by the device. In these cases, if in the warning message
handling for the bus, the GST_DEBUG_BIN_TO_DOT_FILE* category of functions are used,
the src lookup causes a new warning to be posted on the bus, causing a loop.
This patch changes the warning for these controls so they are not posted on the bus.
https://bugzilla.gnome.org/show_bug.cgi?id=758703
A device can support more than one colorspace for a given image
dimension and pixel format. So we have to probe all the supported
colorspace and not only rely on the default one. Otherwise we could end
up with negotiation failure if the caps colorimetry field don't match
the v4l2 device default one even if the v4l2 could support such
colorimetry.
This patch enable probing if colorspace for both capture and output
device. It really makes sense for output device since the colorspace
shall be set by the application and a little less for capture device
which, at the moment, shall provide the colorspace; ie: the v4l2
specification seems to not take into account the fact that a capture
device could do colorspace conversion.
As a side effet, probing takes some times and so sligthly delay v4l2
initialization. Note that this patch only probe colorspace and not all
colorspace, matrix, transfer and range combination to avoid taking too
much time, especially with low-speed devices as full probing do 1782
ioctl.
https://bugzilla.gnome.org/show_bug.cgi?id=755937
gst_v4l2_object_get_caps_info() always return V4L2_PIX_FMT_SBGGR8
for all bayer formats. This is obviously broken if the device use
another ordering. Fix this by properly reading the format parameter.
https://bugzilla.gnome.org/show_bug.cgi?id=763318
Replicate V4L2_MAP_QUANTIZATION_DEFAULT macro behavior.
At #v4l it was described that documentation might be wrong and that
we should trust this macro instead.
https://bugzilla.gnome.org/show_bug.cgi?id=762529
Didn't know which one to choose between queuing and queueing, so I picked
the one with the biggest amount of vowels in a row ;-P (both are
acceptable apparently)
This time, check if it's an RGB format and sets the transformation
matrix to identity. The rest of the colorimetry information is
meaningfull and shall be kept.
https://bugzilla.gnome.org/show_bug.cgi?id=759624
Use the new primaries and transfer function for Adobe RGB.
Explicitly list the colorimetry instead of using the default GStreamer
ones. The defaults for BT2020, for example, do not match.
Explicitly set the matrix of SRGB to RGB.
Add properties to the device with exactly the same keys and sematics
as what pulseaudio uses as property keys.
Also handle the case when a device is probed manually and not through gudev.
https://bugzilla.gnome.org//show_bug.cgi?id=759780
This change add all the new RGB based format. Those format removes the
ambiguity with the ALPHA channel. Some other missing multiplanar format
has been added with some additional cleanup.
If something in /dev/video* get added, removed or replaced, we need to
probe the devices again in order to ensure the dynamic devices are up to
date.
https://bugzilla.gnome.org/show_bug.cgi?id=758085
There was some miss-match in the implementation. This makes it
concistent, though functionally it worked, except the video decoder
output-io-mode getter.
This fixes wrong mapping for sRGB as in GStreamer sRGB correctly
apply to RGB formats, while in V4L2 it's an alias for sYCC. Also
add support for the new quantization (range), ycbcr_encoding (matrix)
and xfer_func (transfer) enumeration.
This is the latest from media tree. This should enable more development
of the v4l2 elements. This includes new flags requires to fix draining
path in decoder, colorimetry and much more.
