Commit graph

7837 commits

Author SHA1 Message Date
Tim-Philipp Müller
3abeb1e578 qtdemux: use GstByteReader for atom dumping and fix a few bugs 2009-09-23 16:54:42 +01:00
Tim-Philipp Müller
c8c9b0f35d qtdemux: move stco, stts, stss and stps atom parsing over to GstByteReader
Make sure we don't read beyond the atom boundary. Note that the code
behaves slightly differently in the corner case where there is not
enough atom data for the specified number of samples (n_samples_time)
in the atom, but still enough data to fill the pre-allocated index of
n_samples entries: before we would just stop parsing the stts data
and continue, whereas now we will likely error out. This should not
be a problem in practice though. We could maintain the old behaviour
by doing reads with a size check inside the loop if needed.
2009-09-23 16:54:42 +01:00
Tim-Philipp Müller
4be46b1586 qtdemux: use bytereader to parse stsz and stsc atoms
Use GstByteReader to parse stsz and stsc chunks, and check size of
available data before parsing it, instead of blindly assuming there
will be enough data. Fixes crashes with some fuzzed/broken files.
2009-09-23 16:54:42 +01:00
Tim-Philipp Müller
5875e2016a qtdemux: add qt_atom_parser_get_offset() and optimise _peek_sub() 2009-09-23 16:54:42 +01:00
Tim-Philipp Müller
410ebb7eb3 qtdemux: add QtAtomParser, an inlined GstByteReader variant 2009-09-23 16:54:41 +01:00
Mark Nauwelaerts
02581dd2a5 matroskademux: use proper order for no-more-pads and newsegment and tag sending 2009-09-23 17:24:22 +02:00
Mark Nauwelaerts
702df566c3 matroskademux: sprinkle a few branch prediction macros 2009-09-23 17:24:22 +02:00
Alessandro Decina
195883b30a Fix compile warnings with gcc 4.0.1. 2009-09-22 15:04:36 +02:00
Jan Schmidt
600516be90 matroskamux: Don't get stuck in an infinite loop with Dirac
At the end, Dirac streams have an EOS packet with 0 length.
Don't ever sit in an infinite loop when processing one. Allows
muxing Dirac into mkv to complete successfully.
2009-09-22 11:50:11 +01:00
Tim-Philipp Müller
123181a114 Update .gitignore 2009-09-22 11:03:46 +01:00
Tim-Philipp Müller
0506545b04 videomixer: fix up Makefile some more
Remove CFLAGS from LIBADD and make order of the various CFLAGS and
LIBS at least consistent with each other.
2009-09-22 11:02:02 +01:00
Brian Cameron
341be447a6 videomixer: Add $(GST_PLUGINS_BASE_LIBS) to LDFLAGS for linking libgstvideo
Fixes bug #595897.
2009-09-22 08:09:39 +02:00
Wim Taymans
10eb1a0ff4 avi: fix timestamps in push mode 2009-09-21 18:10:12 +02:00
Stefan Kost
253f43203d jpegdec: add a G_UNLIKELY and put perf-cat log to code path that copies 2009-09-21 16:07:50 +03:00
Wim Taymans
2f26ee4285 avi: add some performance measurements
Measure the performance of various index and header parsing steps to the
PERFORMANCE debug category.
2009-09-21 12:32:51 +02:00
Mark Nauwelaerts
50c41acdff speexdec: allow for unknown varying number of frames per buffer
In particular, this caters for RTP payloads with multiple frames
per packet.
2009-09-18 14:46:38 +02:00
Mark Nauwelaerts
35f9efac88 speexdec: use correct sample size in conversions 2009-09-18 14:46:38 +02:00
Mark Nauwelaerts
f4482e4ae3 speexenc: fix buffer time and duration for multiple frames per packet 2009-09-18 14:46:38 +02:00
Stefan Kost
0868ddf30f avidemux: some logging cleanup to help understanding the index parsing overhead 2009-09-18 14:27:45 +03:00
David Schleef
19ae44f4e0 osxaudio: link against GST_BASE_LIBS 2009-09-16 13:28:27 -07:00
Olivier Crête
750387f520 rtpg729pay: Fix adapter leak
The adapter would be leaked if it was empty and the data could be pushed out directly.
2009-09-15 17:24:24 -04:00
Sebastian Dröge
317d6e18a2 pulsesrc: Don't dereference NULL pointers
pa_stream_get_timing_info() can return NULL.

Fixes bug #595220.
2009-09-15 10:05:51 +02:00
David Henningsson
bb787f1030 pulsesink: Don't dereference NULL pointers
pa_stream_get_timing_info() can return NULL.

Fixes bug #595220.
2009-09-15 10:05:51 +02:00
Wim Taymans
ccda761562 pulsesink: handle stream events
Handle stream events and request a PAUSE/PLAY state change from the application
when we receive a CORK/UNCORK event.
2009-09-14 16:05:30 +02:00
David Schleef
78eeb6636e multifilesink: Add next-file property
Add a property to allow control over what event causes a file
to finish being written and a new file start.  The default is
the same as before -- each buffer causes a new file to be
written.  Added is a case where buffers are written to the
same file until a discontinuity in the stream.
2009-09-13 20:00:53 -07:00
David Schleef
903c79e767 dvdemux: Use values from decoder structure directly
Don't store the same values in the GstDvDemux.  This
fixes a bug where dvdemux would detect a stream as PAL
instead of NTSC, and silently parse it wrong.
2009-09-13 19:59:45 -07:00
David Schleef
29173242bb dvdemux: Add code to parse SMPTE time codes
Code to convert time codes to/from timestamps and frame numbers.
2009-09-13 13:22:35 -07:00
David Schleef
1b57f19509 dvdemux: Fix detection of new media
There are 5 or 6 AAUX source control packs in a frame, and any
of them could have REC_ST cleared, indicating a recording start
point.  libdv only checks the first.
2009-09-13 12:34:07 -07:00
Edward Hervey
b1dab0fce1 dvdemux: Set DISCONT flag on buffers when REC_ST flag is set.
Also add a few branch prediction macros
2009-09-12 19:26:56 +02:00
Jan Schmidt
7c2489ca77 check: Fix a couple of tests.
The souphttpsrc test wasn't compiling. The soup-misc.h header is needed for
soup_ssl_supported.
Fix the y4menc test to use a 'progressive' header for the test data now that
the element outputs correct interlacing info.
2009-09-12 00:13:04 +01:00
Michael Smith
3257374310 wavparse: treat a zero-sized data chunk as extending to the end of the file.
This fixes playback of some files that don't have a valid data chunk length,
apparently some program creates these.
2009-09-11 13:34:01 -07:00
Stefan Kost
00ffa9c2dd v4l2src: add a function pointer for get_frame function and optimize a bit
Use a function-pointer for mmap/read, as this can't change during capture. Also
sprinkle a few G_LIKELY/UNLIKELY to improve the error-less code path.
2009-09-11 22:24:47 +03:00
Stefan Kost
1a945a32cc v4l2: log buffer copies on queue underrun in perf category
v4l2src has a slow path where it does buffer-copies when it runs out of queued
buffers. Log this to performance category to help monitoring it.
2009-09-11 22:19:23 +03:00
Sebastian Dröge
0c50816aaa pulsesink: Implement GstStreamVolume interface 2009-09-11 16:38:03 +02:00
Sebastian Dröge
7fb6ad6d4c pulsesink: Implement mute property 2009-09-11 16:38:03 +02:00
Wim Taymans
d4316e74fc gdkpixbufsink: fix docs refering to send-messages 2009-09-11 13:33:31 +02:00
Wim Taymans
445236a769 spectrum: add post-messages property
Add a post-messages property and deprecate the less descriptive message
property.
2009-09-11 13:28:35 +02:00
Wim Taymans
9fb92af2df pixbufsink: add post-messages property
Add post-messages and deprecate send-messages as the former is more
descriptive of what actually happens.
2009-09-11 13:20:06 +02:00
Wim Taymans
1935483fbf multifilesink: rename silent to post-messages
Use the post-messages property name instead of silent as it is more
descriptive.
2009-09-11 13:12:54 +02:00
Wim Taymans
f68cd7e708 multifilesink: post messages for each buffer
Add a silent property that can be set to FALSE to post messages on the bus for
each written file.
Do some more cleanups.
Add some docs.

Fixes #594663
2009-09-11 12:17:21 +02:00
Olivier Crête
411c71da13 rtph263pay: Allocate Boundry structs on the stack instead of the heap to avoid leaks
Fixes bug #594691.
2009-09-11 07:31:38 +02:00
Stefan Kost
0a7ef67ad0 docs: fix gtk-doc warnings 2009-09-10 10:28:48 +03:00
Stefan Kost
0a68003efe docs: fix gtk-doc warnings 2009-09-10 10:26:23 +03:00
David Schleef
3dc2c2472c dv1394src: Add a clock based on isochronous cycle counter
Partial fix for #169383.
2009-09-09 18:19:56 -07:00
Sebastian Dröge
a9909c1abf videobox: Fix AYUV->I420 conversion
For this fix the averaging of the chroma values. It should't be (a/2 + b)/2
but just (a + b)/2.

Fixes bug #594599.
2009-09-09 16:28:53 +02:00
Wim Taymans
42ee5e22a2 pulsesink: remove ringbuffer reset compensation
Remove the code to deal with a ringbuffer reset as this code is now in the base
class.
Bump the -base requirement as we need the new baseaudiosink code to function
properly.
2009-09-09 16:25:06 +02:00
Wim Taymans
75a48e238a pulsesink: whitespace fixes 2009-09-09 16:24:49 +02:00
Wim Taymans
5580571f8d whitespace fixes 2009-09-09 10:27:55 +02:00
Wim Taymans
ca7bec0d65 pulse: small cleanups
Add some debug info
Fix the state changes
2009-09-08 19:34:09 +02:00
Marc-André Lureau
fe2d8bdc64 multipartmux: mark data buffer as delta-unit
So that multifdsink always start sending header buffer first

Fixes #594520
2009-09-08 18:34:49 +02:00