Since we are encoding each view independently from each other, we
need a higher number of pre-allocated surfaces to be used as the
reconstructed frames. For Stereo High profile encoding, this means
to effectively double the number of frames to be stored in the DPB.
Add initial support for Subset SPS, Prefix NAL and Slice Extension NAL
for non-base-view streams encoding, and the usual SPS, PPS and Slice
NALs for base-view encoding.
The H.264 Stereo High profile encoding mode will be turned on when the
"num-views" parameter is set to 2. The source (raw) YUV frames will be
considered as Left/Right view, alternatively.
Each of the two views has its own frames reordering pool and reference
frames list management system. Inter-view references are not supported
yet, so the views are encoded independently from each other.
Signed-off-by: Li Xiaowei <xiaowei.a.li@intel.com>
[limited to Stereo High profile per the definition of MAX_NUM_VIEWS]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Create structures to maintain the reference frames list (RefPool) and
frames reordering (ReorderPool) logic.
This is a prerequisite for H.264 MVC support.
Signed-off-by: Li Xiaowei <xiaowei.a.li@intel.com>
Add provisions to write subset SPS headers to the bitstream in view
to supporting the H.264 MVC specification.
This assumes the libva "staging" branch is in use.
Signed-off-by: Li Xiaowei <xiaowei.a.li@intel.com>
Optimize lookups of view ids / view order indices by caching the result
of the calculatiosn right into the GstVaapiParserInfoH264 struct. This
terribly simplifies is_new_access_unit() and find_first_field() functions.
Add safe fallbacks for MVC profiles:
- all MultiView High profile streams with 2 views at most can be decoded
with a Stereo High profile compliant decoder ;
- all Stereo High profile streams with only progressive views can be
decoded with a MultiView High profile compliant decoder ;
- all drivers that support slice-level decoding could normally support
MVC profiles when the DPB holds at most 16 frames.
In order to have a stricter conforming implementation, we need to carefully
detect access unit boundaries. Additional operations could be necessary to
perform at those boundaries.
Detect the first VCL NAL unit of a picture for MVC, based on the
view_id as per H.7.4.1.2.4. Note that we only need to detect new
view components.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Always cache the previous NAL unit so that we could check whether
there is a Prefix NAL unit immediately preceding the current slice
or IDR NAL unit. In that case, the NAL unit metadata is copied into
the current NAL unit. Otherwise, some default values are inferred,
tentatively. e.g. view_id shall be set to 0 and inter_view_flag to 1.
[infer default values for slice if previous NAL was not a Prefix]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Allow decoding for base views of MVC encoded streams. For now, just skip
the slice extension and prefix NAL units, and skip non-base view frames.
Signed-off-by: Xiaowei Li <xiaowei.a.li@intel.com>
[fixed memory leak, improved check for MVC NAL units]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Factor out process by which the decoded picture with the lowest POC
is found, and possibly output. Likewise, the storage and marking of
a reference decoded, or non-reference decoded picture, into the DPB
could also be simplified as they mostly share the same operations.
Make init_picture_ref_lists() more consistent with other functions
related to the reference marking process by supplying the current
picture as argument.
Add gst_vaapi_display_get_vendor_string() helper function to query
the underlying VA driver name. The display object owns the resulting
string, so it shall not be deallocated.
That function is thread-safe. It could be used for debugging purposes,
for instance.
Make sure to initialize one GstVaapiDisplay at a time, even in threaded
environments. This makes sure the display cache is also consistent
during the whole display creation process. In the former implementation,
there were risks that display cache got updated in another thread.
Add support for dynamic growth of the VA surfaces pool. For decoding,
this implies the recreation of the underlying VA context, as per the
requirement from VA-API. Besides, only increases are supported, not
shrinks.
It is a requirement from VA-API specification that the VA context got
from vaCreateContext(), for decoding purposes, binds the supplied set
of VA surfaces. This means that if the set of VA surfaces is to be
changed for the current decode session, then the VA context needs to
be recreated with the new set of VA surfaces.
Complement fix committed as e95a42e.
The H.264 AVC standard has to say: if the field is part of a reference
frame or a complementary reference field pair, and the other field of
the same reference frame or complementary reference field pair is also
marked as "used for long-term reference", the reference frame or
complementary reference field pair is also marked as "used for long-term
reference" and assigned LongTermFrameIdx equal to long_term_frame_idx.
This fixes decoding of MR9_BT_B in strict mode.
https://bugs.freedesktop.org/show_bug.cgi?id=64624https://bugzilla.gnome.org/show_bug.cgi?id=724518
Request the correct chroma format for decoding grayscale streams.
i.e. make lookups of the VA chroma format more generic, thus possibly
supporting more formats in the future.
This means that, if a VA driver doesn't support grayscale formats,
it is now going to fail. We cannot safely assume that maybe grayscale
was implemented on top of some YUV 4:2:0 with the chroma components
all set to 0x80.
Fix reference picture marking process with memory_management_control_op
set to 3 and 6, i.e. assign LongTermFrameIdx to a short-term reference
picture, or the current picture.
This fixes decoding of FRExt_MMCO4_Sony_B.
https://bugs.freedesktop.org/show_bug.cgi?id=64624https://bugzilla.gnome.org/show_bug.cgi?id=724518
[squashed, edited to use GST_VAAPI_PICTURE_IS_COMPLETE() macro]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
The initialization of reference picture lists (8.2.4.2) applies to all
slices. So, the RefPicList0/1 lists need to be constructed prior to
each slice submission to the HW decoder.
This fixes decoding of video sequences where frames are encoded with
multiple slices of different types, e.g. 4 slices in this order I, P,
I, and P. More precisely, CABAST3_Sony_E and CABASTBR3_Sony_B.
https://bugzilla.gnome.org/show_bug.cgi?id=724518
When NAL units of type 13 (SPS extension) or type 19 (auxiliary slice)
are present in a video, decoders shall perform the (optional) decoding
process specified for these NAL units or shall ignore them (7.4.1).
Implement option 2 (skip) for now, as alpha composition is not
supported yet during the decoding process.
This fixes decoding of the primary coded video in alphaconformanceG.
https://bugzilla.gnome.org/show_bug.cgi?id=703928https://bugzilla.gnome.org/show_bug.cgi?id=728869https://bugzilla.gnome.org/show_bug.cgi?id=724518
[skip NAL units earlier, i.e. at parsing time]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
When MVC slice NAL units (coded slice extension and prefix NAL) are
present, the number of NAL header bytes is 3, not 1 as usual.
Signed-off-by: Li Xiaowei <xiaowei.a.li@intel.com>
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
At the time the first VCL NAL unit of a primary coded picture is found,
and if that NAL unit was parsed to be an SPS or PPS, then the entries
in the parser may have been overriden. This means that, when the picture
is to be decoded, slice_hdr->pps could point to an invalid (the next)
PPS entry.
So, one way to solve this problem is to not use the parser PPS and
SPS info but rather maintain our own activation chain in the decoder.
https://bugzilla.gnome.org/show_bug.cgi?id=724519https://bugzilla.gnome.org/show_bug.cgi?id=724518
Retain the SEI messages that were parsed from the access unit until we
have completely decoded the current frame. This is done so that we can
peek at that data whenever necessary during decoding. e.g. for exposing
3D stereoscopic information at a later stage.
Fix support for grayscale encoded video clips, and possibly others if
the underlying driver supports the non-YUV 4:2:0 formats. i.e. defer
the decision that a surface with the desired chroma format is not
supported to the actual VA driver implementation.
https://bugzilla.gnome.org/show_bug.cgi?id=728144
Don't force allocation of VA surfaces in YUV 4:2:0 format. Rather, allow
for the upper layer to specify the desired chroma type. If the chroma
type field is not set (or yields zero), then YUV 4:2:0 format is used
by default.
Fix possible bug when a per-segment deblocking filter level value
needs to be set in non-absolute mode, i.e. when the loop filter update
value is negative in delta mode.
Also clamp the resulting filter level value to 0..63 range.
Improve condition to disable the loop filter. The previous heuristic
used to check all filter levels, for all segments. It turns out that
only the base filter_level value defined in the frame header needs
to be checked.
This fixes 00-comprehensive-013.
Fix generation of source tarballs when certain conditionals are not
met. e.g. always include all buildable codecparsers sources in the
distribution tarball, fix plug-in element sources set to include X11
and encoder bits.
The built-in libvpx serves multiple purposes, among which the most
important ones could be: track the most up-to-date, and optimized,
range decoder; allow for future hybrid implementations (non-VLD);
and have a completely independent range decoder implementation.
Apply correct patch from fd.o #722760 to fix several issues: update the
license terms to LGPLv2.1+, fix dependencies to built-in libvpx and fix
make dist.
Add libvpx submodule that tracks the upstream version 1.3.0. This is
needed to build a libgstcodecparsers_vpx.so library with all symbols
placed into the GSTREAMER namespace.
The gst_h264_parse_parse_sei() function now returns an array of SEI
messages, instead of a single SEI message. Reason: it is allowed to
have several SEI messages packed into a single SEI NAL unit, instead
of multiple NAL units.
8fadf40 h264: Fix multiple SEI messages in one SEI RBSP parsing.
644825f h265: remove trailling 0x00 bytes as the spec doesn't allow them
95f9f0f h264: remove trailling 0x00 bytes as the spec doesn't allow them
766007b h265: Initialize pointer correctly that is never assigned but freed in error cases
8ec5816 h265: Fix segfault when parsing HRD parameter
5b1730f h265: Fix segfault when parsing VPS
983b7f7 h265: prevent to overrun chroma_weight_l0_flag
7ba641d h265: Fix debug output
d9f9f9b h264: not all startcodes should have 3-byte 0 prefix
Fix parser and decoder state to sync at the right locations. This is
because we could reset the parser state, while the decoder state was
not copied yet, e.g. when parsing several NAL units from multiple frames
whereas the current frame was not decoded yet.
This is a regression brought in by commit 6fe5496.
Fix gstreamer-vaapi includedir for GStreamer 1.2 setups. i.e. use
the pkgconfig version (1.0) instead of the intended API version (1.2).
libgstvaapi1.0-dev and libgstvaapi1.2-dev packages will now conflict,
as would core GStreamer 1.0 and GStreamer 1.2 dev packages anyway.
