Explain why the whole bus sync handler mess is needed. Add section about
how to use GstXOverlay in connection with Gtk+ and mention the Gtk+ API
break issue and how to work around it (see #601809).
lang-tables.c is included by lang.c and not really a proper source
file that should be compiled into its own object, so rename it to
lang-tables.dat and put it into EXTRA_DIST instead to ensure it
gets disted.
Increase default drift tolerance to 40ms to avoid glitches with decoders
or formats where there's a lot of timestamp jitter for some reason or
another (in this case: asf/wma), at least until we implement timestamp
smoothing.
g_mapped_file_unref() was introduced in GLib 2.22, but we depend
only on GLib 2.18, so use g_mapped_file_free() when compiling
against older GLib versions until we bump the GLib dependency.
Add some utility functions for language tags and ISO-639
codes. These are useful for both GUIs and elements. The
iso-codes package is used for language name translations
if available.
API: gst_tag_get_language_codes()
API: gst_tag_get_language_name()
API: gst_tag_get_language_code()
API: gst_tag_get_language_code_iso_639_1()
API: gst_tag_get_language_code_iso_639_2B()
API: gst_tag_get_language_code_iso_639_2T()
Our calibration against the pipeline clock is done with the adjusted
ringbuffer time, so take the adjustement into account. Fixes some audio dropouts
when reusing audio sinks after switching clocks and slaving methods in a
pipeline.
When we are calibrating the internal clock against the external clock take into
account the time offset applied to our internal clock because we will subtract
that in the render_function again.
Add a new video event to mark the start or end of a still-frame
sequence, and a parser function to identify and extract info from
such events.
API: gst_video_event_new_still_frame()
API: gst_video_event_parse_still_frame()
Fixes: #601942
Use send() instead of write() so that we can pass the MSG_NOSIGNAL flags to
avoid crashing with SIGPIPE when the remote end is not listening to us anymore.
Fixes#601772
When we start and we need to produce the first sample, go to the next sample
that will be written into the ringbuffer instead of trying to go to sample 0.
We relied on rather small ringbuffer sizes to correctly go to the current
sample, which breaks whith large buffers.
Fixes#600945
Add drift-tolerance property (defaulting to 20ms) to handle resync after clock
drift or timestamp drift instead of relying on the latency-time value for clock
drift and 500ms for timestamp drift.
Remove warning about discont timestamp and simply resync. The warning is in some
cases not correct and is triggered more frequently now that we lower the
tolerance value.
There's not much point in using GST_DEBUG_FUNCPTR with GObject
virtual functions such as get_property, set_propery, finalize and
dispose, since they'll never be used by anyone anyway. Saves a
few bytes and possibly a sixteenth of a polar bear.
I also renamed glib_enum_prefix to glib_gen_prefix as we also use that for the
marshallers. Also rename the rtsp-marshal.list to work with the unified prefix.
gstrtspconnection.c:gst_rtsp_connection_receive() can hang when an error occured
on a socekt. Fix this problem by checking for error on 'other' socket after poll
return.
Fixes#596159
Rhythmbox uses cdda:// URIs of the form cdda://track#device, which
worked before the fix for bug #321532.
Also adds a check for negative track numbers and some unit tests for URI
parsing.
Fixes bug #595454.
Should really have been READABLE and WRITABLE, but those are hard to
add whilst maintaining backwards compatibility. See #343615.
API: GST_MIXER_TRACK_READONLY
API: GST_MIXER_TRACK_WRITEONLY
Check for pulsesink < 0.10.17 because it includes code that is now included in
baseaudiosink. Disable that code in baseaudiosink to be compatible with the
older version.
Take the time of the clock so that the last_time field is set. This is important
for sinks that restart their internal ringbuffer after a caps change and need to
know the last know position.
When going to NULL, we reset the ringbuffer so that it starts beck from 0. We
also make sure that the clock is updated with the elapsed time so that it
alsways increments even when the ringbuffer goes back to 0. When this happened
we need to adjust the sample position for the reset ringbuffer.
Fixes#594136
Add a property to disable rendering of video frames during preroll. This
will only work for videosinks that use the new ::show_frame() vfunc instead
of overriding basesink's preroll and render vfuncs directly.
API: GstVideoSink:show-preroll-frame
The old one did the mistake of not actually advancing the ringbuffer, it just
adjusted the segbase, introducing the whole lenght of the ringbuffer as an
extra delay in the pipeline.
Also make sure that the resync can never go back in time, producing the same
timestamps that has already been produced, as this can cause severe problems
for sinks and other synching mechanisms.
Fixes#594256
Add various conversion functions between time<->bytes<->rtptime that will be
used later on.
Refactor the min/max packet length code so that it can be used for both
sample/frame based payloaders. Cache the returned values.
code cleanups.
When we discover a DISCONT buffer, make the outgoing RTP timestamps have the
same gap as the GStreamer timestamps gap.
Have a custom sample/frame function to generate an offset that the base class
will use for generating RTP timestamps. This results in perfect RTP timestamps
on the output buffers.
Refactor setting metadata on output buffers.
Add some more functionality to _flush().
Handle DISCONT on the input buffers and set the marker bit and DISCONT flag on
the next outgoing buffer.
Flush the pending data on EOS.
Always use the adapter when we need to fragment the incomming buffer. Use more
modern adapter functions to avoid malloc and memcpy. The overall result is that
the code looks cleaner while it should be equally fast and in some case avoid a
memcpy and malloc.
Use the adapter timestamping functions for more precise timestamps in case of
weird disconts.
Cache some values instead of recalculating them.
Add gst_base_rtp_audio_payload_flush() to flush a certain amount of bytes from
the internal adapter.
API: GstBaseRTPAudioPayload::gst_base_rtp_audio_payload_flush()
Allow subclasses to use the OFFSET field on RTP buffers to influence the way in
which RTP timestamps are generated. Usually timestamps are created from the
GStreamer timestamps on the buffer, which could result in imperfect RTP
timestamps.
... which is the default seed when creating a new GRand. Because
GLib in older versions used buffered IO this would take a lot of time.
Instead use the global GRand for getting random numbers and keep the
three instance GRand for backward compatibility with a simple seed.
Fixes bug #593284.
The new API to send messages using GstRTSPWatch will first try to send the
message immediately. Then, if that failed (or the message was not sent
fully), it will queue the remaining message for later delivery. This avoids
unnecessary context switches, and makes it possible to keep track of
whether the connection is blocked (the unblocking of the connection is
indicated by the reception of the message_sent signal).
This also deprecates the old API (gst_rtsp_watch_queue_data() and
gst_rtsp_watch_queue_message().)
API: gst_rtsp_watch_write_data()
API: gst_rtsp_watch_send_message()
With gst_rtsp_connection_set_http_mode() it is possible to tell the
connection whether to allow HTTP messages to be supported. By enabling HTTP
support the automatic HTTP tunnel support will also be disabled.
API: gst_rtsp_connection_set_http_mode()
The error_full callback is similar to the error callback, but allows for
better error handling. For read errors a partial message is provided to
help an RTSP server generate a more correct error response, and for write
errors the write queue id of the failed message is returned.
Rewrote read_line() to support LWS (Line White Space), the method used by
RTSP (and HTTP) to break long lines. Also added support for \r and \n as
line endings (in addition to the official \r\n).
From RFC 2068 section 4.2: "Multiple message-header fields with the same
field-name may be present in a message if and only if the entire
field-value for that header field is defined as a comma-separated list
[i.e., #(values)]." This means that we should not split other headers which
may contain a comma, e.g., Range and Date.
Due to the odd syntax for WWW-Authenticate (and Proxy-Authenticate) which
allows commas both to separate between multiple challenges, and within the
challenges themself, we need to take some extra care to split these headers
correctly.
