Commit graph

1258 commits

Author SHA1 Message Date
Sebastian Dröge
44ffb80a32 audio: Extend guards in functions to also cover negative/unknown out of bounds DSD formats
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4966>
2023-07-05 12:08:33 +00:00
Sebastian Dröge
6b47a37ed8 audio: Change value of GST_DSD_FORMAT_UNKNOWN to 0
GObject and calloc() etc are initializing memory to 0, so using 0 as the
unknown variant makes it more likely that mistakingly zero-initialized
memory does not end up with a wrong DSD format.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4966>
2023-07-05 12:08:33 +00:00
Sebastian Dröge
030bf5e560 audio: Make GST_DSD_FORMAT_UNKNOWN -1 instead of 0xffffffff
0xffffffff is mapped to 2**32 - 1 but GLib enums are signed ints so this
value is out of range and causes problems with bindings.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4966>
2023-07-05 12:08:33 +00:00
Guillaume Desmottes
1027180960 subtitleoverlay: fix mutex error if sink caps is not video
We were trying to unlock a mutex that was not locked.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4964>
2023-07-05 10:34:21 +00:00
Edward Hervey
f825b7aba3 uridecodebin3: Refuse sub uri in gapless mode
This is too problematic to handle properly right now.

See https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2550 and
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2605

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4958>
2023-07-03 16:02:40 +02:00
Hou Qi
dbdbf2d256 decodebin3: fix memory leak when remove candidate decoder
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4955>
2023-07-03 07:13:13 +00:00
Carlos Rafael Giani
d5a9ca8ef6 gl: Separate viv direct texture checks from viv-fb winsys check
Vivante direct textures do not depend on the viv-fb windowing system.
Decouple these two to be able to use direct textures even when viv-fb
is not enabled.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4950>
2023-07-03 05:25:13 +00:00
Jan Schmidt
2e5908d33f appsrc: Release priv->lock before pushing segment
Don't hold the private appsrc lock while pushing out a segment
event, which may block indefinitely.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4951>
2023-06-30 16:05:57 +00:00
Jonas Kvinge
fa46905aea discoverer: Only call handle_current_async if still processing
When gst_element_set_state is called in _setup_locked and errors, the
callback is already processed before we reach handle_current_async, and
the timer is started even though it's finished processing, which results
in a NULL pointer crash later in async_timeout_cb.

To fix this, we check that it's still processing before calling
handle_current_async.

Fixes #1683

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4936>
2023-06-30 08:52:38 +03:00
Thibault Saunier
c5304751ab uridecodebin: Handle non dynamic sources with several source pads
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4881>
2023-06-30 01:00:34 +00:00
Alicia Boya García
8c628fa325 validate tests: include debugutilsbad to be able to use testsrcbin
Fixes test: validate.uridecodebin.expose_raw_pad_caps

testsrcbin (currently part of debugutilsbad) is an useful element for
validate tests.

validate.uridecodebin.expose_raw_pad_caps makes use of it.
Unfortunately, because validate tests with GStreamer only run with
whitelisted plugins and `debugutilsbad` wasn't in the whitelist, the
test was failing and being auto-skipped.

This patch adds debugutilsbad to the whitelists used by validate tests
in subprojects with a validate/meson.build.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4931>
2023-06-27 10:13:19 +00:00
Thibault Saunier
e7f13ede0f videoconvertscale: Remove the restriction on ANY memory
Our pad templates already expose ANY feature and the code supports that
case even if only for the passthrough, we should not disable that feature.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4733>
2023-06-27 08:17:33 +00:00
He Junyan
a10e05000d video-info-dma: add gst_video_info_dma_drm_to_video_info()
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4883>
2023-06-26 16:18:24 +00:00
Carlos Rafael Giani
fd25e24217 alsa: Add support for DSD audio
Code is partially based on the DSD of Robert Tiemann <rtie@gmx.de>:
https://gitlab.freedesktop.org/rtiemann/gstreamer/-/tree/dsd

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3901>
2023-06-23 01:27:04 +00:00
Carlos Rafael Giani
8febc4102a audiosink: Add support for DSD data
Code is partially based on the DSD of Robert Tiemann <rtie@gmx.de>:
https://gitlab.freedesktop.org/rtiemann/gstreamer/-/tree/dsd

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3901>
2023-06-23 01:27:04 +00:00
Carlos Rafael Giani
b65eab915a audioringbuffer: Add support for DSD data
Code is partially based on the DSD of Robert Tiemann <rtie@gmx.de>:
https://gitlab.freedesktop.org/rtiemann/gstreamer/-/tree/dsd

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3901>
2023-06-23 01:27:03 +00:00
Carlos Rafael Giani
4cce9a77c9 audioringbuffer: Introduce accessor macros
This follows the design ideas behind GstVideoInfo to provide an API
capable of hiding any underlying ABI compatibility mechanisms.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3901>
2023-06-23 01:27:03 +00:00
Carlos Rafael Giani
8c5a8f4466 dsd: Add code for DSD audio support
Related to:

https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/issues/972

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3901>
2023-06-23 01:27:03 +00:00
Sebastian Dröge
3144f63302 tags: Don't allow image tags with G_MAXUINT32 length
This will cause an integer overflow a little bit further down because we
allocate a bit more memory to allow for a NUL-terminator.

The caller should've avoided passing that much data in already as it's
not going to be a valid image and there's likely not even that much data
available.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4894>
2023-06-20 10:02:19 +00:00
Sebastian Dröge
069065adc4 subparse: Skip after the end of a valid closing tag instead of only skipping <
This is a small optimization and avoids restarting the next parsing
iteration on already accepted data.

On its own it would also fix ZDI-CAN-20968 (see previous commit) but the
previous commit independently is also a valid fix for it.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4895>
2023-06-20 09:06:44 +01:00
Sebastian Dröge
97c6d7495e subparse: Look for the closing > of a tag after the opening <
Previously when fixing up subrip markip, we were looking from the start
of the remaining buffer instead. Due to how skipping over closing tags
works, the remaining buffer will still contain the closing `>` of the
previous tag so if a unexpected closing tag is found after another
closing tag, we would potentially do an out of bounds memmove().

Fixes ZDI-CAN-20968
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2662

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4895>
2023-06-20 09:06:38 +01:00
He Junyan
0b981a216c gl: Add a print function to dump all EGL image drm format
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4877>
2023-06-19 12:58:02 +00:00
Nicolas Dufresne
42c12c9c73 doc: Update plugin cache
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3447>
2023-06-15 10:41:26 -04:00
Nicolas Dufresne
c17e648fcf video: Add NV12_10LE32_4L4 tiled format
This 10bit format is identical to NV12_4L4, but uses NV12_10LE40 format
internally. In show, the tiles is made af 4 rows of 5 bytes, which contains
4 fully packed 10bit values.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3447>
2023-06-15 14:32:32 +00:00
Nicolas Dufresne
b832a20d35 video: Fix tile info UV width
The width in pixel should consider a UV pair as 1 pixel, fix the metadata
accordingly.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3447>
2023-06-15 14:32:32 +00:00
Marek Vasut
5ad834ce28 videotestsrc: Support video/x-bayer 10/12/14/16 bit depths
Add support for generation of 10/12/14/16 bit bayer test pattern.
The implementation is rather simplistic, just take the ARGB
input, generate 16-bit data out of it instead of 8-bit, shift
them as required by the output bitness, and apply endian swap.

Example usage:
```
$ gst-launch-1.0 videotestsrc ! \
    video/x-bayer,width=512,height=512,format=bggr12le ! \
    bayer2rgb ! \
    video/x-raw,format=RGBA64_LE ! \
    videoconvert ! \
    autovideosink
```

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4686>
2023-06-15 08:26:12 +00:00
Marek Vasut
e569b8ba1e videotestsrc: Simplify ARGB to Bayer conversion
Simplify the conversion to bayer pattern as suggested by Nicolas Dufresne.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4686>
2023-06-15 08:26:12 +00:00
Marek Vasut
d0efb05f52 videotestsrc: Move video/x-bayer caps parsing in one place
Move all the video/x-bayer caps parsing into one place,
gst_video_test_src_parse_caps(), no functional change.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4686>
2023-06-15 08:26:12 +00:00
Haihua Hu
5716ee3513 glfilter: add parent meta to output buffer for input buffer
glfilter will unref input buffer after _transform() call immidiately,
but gpu may still reading input buffer for rendering because gl
api is executed async. Need hold reference for input buffer by
adding parent meta to output buffer.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4801>
2023-06-13 07:53:49 +00:00
Xavier Claessens
b687e19e10 opus: Fix crash when getting unexpected channel position
gst_opus_channel_names is a static array with only 13 items.
GstAudioChannelPosition have bigger values than that.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4798>
2023-06-12 20:00:52 +00:00
Xabier Rodriguez Calvar
4769a2ab97 playbin2: improve transference doc of get-*-pad actions
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2081>
2023-06-12 10:26:26 +00:00
Philippe Normand
ea9b837b07 video: convertframe: Add a debug category
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4629>
2023-06-11 15:45:02 +00:00
Philippe Normand
b115756338 video: convertframe: Fix annotation of gst_video_convert_sample()
The returned sample is pulled from appsink which transfers its ownership.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4629>
2023-06-11 15:45:02 +00:00
Philippe Normand
a0ac1cccbf appsink: Adjust annotations of pull- signals
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4629>
2023-06-11 15:45:02 +00:00
William Manley
04bcff4dce basetextoverlay: Fix typo in "text-y" property description
Looks like a copy and paste error.

Co-authored-by: Fabian Orccon <cfoch.fabian@gmail.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4823>
2023-06-10 16:52:29 +00:00
Kevin Song
55926f0271 appsink: unref gstbuffer in prev sample early
Appsink will unref prev sample in dispose function. Which is later
when V4L2 video decoder link with appsink as V4L2 video decoder
will close V4L2 device fd during GST_STATE_CHANGE_READY_TO_NULL.
If the video buffer return to V4L2 video decoder after the decoder
closed V4L2 device fd, V4L2 can't release the video frame buffer
which allocated with MMAP mode as application can't call
VIDIOC_REQBUFS 0 to release the video frame buffer by V4L2 driver.
The memory of the video frame will leak.
Unref the gstbuffer in stop() function, so V4L2 video decoder
can received all video frame buffers and release it before close
V4L2 device fd.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4818>
2023-06-09 13:13:17 +00:00
Seungha Yang
e953f38789 tests: compositor: Add tests for data flow after EOS scenario
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4783>
2023-06-09 19:58:38 +09:00
Matthew Waters
b291efe44b gldownload: handle passthrough without a critical
With passthrough mode, gldownload/glbasefilter may not ever retrieve a
relevant GstGLContext as it doesn't actually query the surrounding
elements.  Guard against that.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4791>
2023-06-07 22:15:39 +00:00
Hou Qi
95ac8b0cea decodebin3: filter error message and store latency message for candidate decoder
If the GST_MESSAGE_SRC of error message belongs to candidate decoders,
filter the error message and don't forward it as there might be a
following candidate decoder that can be used.

If the GST_MESSAGE_SRC of error message belongs to candidate decoders,
store the latency message and handle it after decoder is accepted.
This is to avoid the selection lock failure if decodebin3 needs to
handle latency message for candidate decoders when sending sticky event.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4677>
2023-06-02 14:51:38 +00:00
Hou Qi
887ae4d9e0 decodebin3: try candidate decoders to select the first one that works
Send sticky events to the new created decoder after it switches
to PAUSED state. It it fails, just skip this decoder and try the
next one until finding one that works. Otherwise remove this
failing stream after trying all decoders and no one can work.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4677>
2023-06-02 14:51:38 +00:00
Hou Qi
6fc6e934aa decodebin3: send sticky event to decoder after setting it to PAUSED
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4677>
2023-06-02 14:51:38 +00:00
Hou Qi
837169a221 decodebin3: add function remove_decoder_link()
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4677>
2023-06-02 14:51:38 +00:00
Hou Qi
536c344111 decodebin3: copy sticky event
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4677>
2023-06-02 14:51:38 +00:00
Edward Hervey
9befb81036 urisourcebin: Set source element to READY before querying it
Generating the source element is done when urisourcebin is doing the READY to
PAUSED state change, so it is reasonable to set the new source element to that
state.

This also allows detecting early failures with backing libraries or
hardware (checks done in NULL->READY).

Finally it makes more sense to have an element in READY when attempting to query
information from it (such as SCHEDULING queries or probing live-ness).

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3856>
2023-06-02 07:00:43 +00:00
Guillaume Desmottes
b3d27da397 streamsynchronizer: check reset-time when handling FLUSH_STOP
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4749>
2023-06-01 09:45:50 +02:00
Guillaume Desmottes
c2d8f4f729 streamsynchronizer: reset eos on STREAM_START
self->eos was never reset after streamsynchronizer has sent EOS
(except on explicit flush or switching back to PAUSED).
As a result, synchronization was broken if new streams were pushed later
as gst_stream_synchronizer_wait() does not wait if self->eos is set.

Fix this by reseting self->eos on STREAM_START as that means a new
stream is being sent upstream and so a new EOS will follow later on.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4749>
2023-06-01 09:45:15 +02:00
Stéphane Cerveau
5873747a59 tools: add bad/ges/omx tools to gst_tools
In static mode, these tools must be built
after the gstreamer-full library to use
the symbol gst_init_static_plugins.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4128>
2023-05-31 15:17:11 +00:00
Stéphane Cerveau
dd17beb681 gstreamer-full: add full static support
Allow a project to use gstreamer-full as a static library
and link to create a binary without dependencies.

Introduce the option 'gst-full-target-type' to
select the build type, dynamic(default) or static.

In gstreamer-full/static build configuration gstreamer (gst.c)
needs the symbol gst_init_static_plugins which is defined
in gstreamer-full.
All the tests and examples are linking with gstreamer but the
symbol gst_init_static_plugins is only defined in the gstreamer-full
library. gstreamer-full can not be built first as it needs to know what plugins
will be built.

One option would be to build all the examples and tests after
gstreamer-full as the tools.

Disable tools build in subprojects too as it will be built at the end of
build process.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4128>
2023-05-31 15:17:11 +00:00
Philippe Normand
a7b09098b9 oggdemux: vp8: Detect keyframe packets
decodebin3 drops data on video streams until a keyframe or header is detected,
so for Ogg/VP8 we now need to correctly flag and signal keyframes downstream.
The first buffer pushed from each src pad also has the HEADER flag set.

Fixes playback of
https://github.com/web-platform-tests/wpt/raw/master/media/test.ogv in playbin3.

Fixes #1418

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4725>
2023-05-31 06:30:48 +00:00
Matthew Waters
cd4b84b60b gl/tests: fix unused-but-set warning if built with gles2-only
../tests/check/pipelines/gl-launch-lines.c:314:12: error: variable 'have_gldifferencematte'
set but not used [-Werror,-Wunused-but-set-variable]
  gboolean have_gldifferencematte;
           ^
1 error generated.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4741>
2023-05-31 04:26:12 +00:00
He Junyan
1a2d136438 gl: EGL image methods to import dmabufs with modifiers
This patch adds gst_egl_image_from_dmabuf_direct_target_with_dma_drm() and
add gst_egl_image_from_dmabuf_with_dma_drm() functions

New function gst_egl_image_from_dmabuf_direct_target_with_dma_drm(), where
gst_egl_image_from_dmabuf_direct_target() is a specialization of the first.

And gst_egl_image_from_dmabuf() is a specialization of new function
gst_egl_image_from_dmabuf_with_dma_drm()

Co-authored-by: Victor Jaquez <vjaquez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4680>
2023-05-30 20:09:27 +00:00
Víctor Manuel Jáquez Leal
9f7f54174a gl: add gst_egl_image_check_dmabuf_direct_with_dma_drm()
It internally uses gst_gl_context_egl_get_dma_formats() instead of fetching
modifiers by itself.

Thus gst_egl_image_check_dmabuf_direct() is a decorator of this new function.

Co-authored-by: He Junyan <junyan.he@intel.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4680>
2023-05-30 20:09:27 +00:00
Víctor Manuel Jáquez Leal
1477ed1ae5 video-info-dma: add gst_video_info_dma_drm_from_video_info()
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4680>
2023-05-30 20:09:27 +00:00
Víctor Manuel Jáquez Leal
af7b5023bd gl: replace _drm_direct_fourcc_from_info()
.. with gst_video_dma_drm_fourcc_from_format()

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4680>
2023-05-30 20:09:27 +00:00
Víctor Manuel Jáquez Leal
7eed950caa gl: add a method to get DMA formats and modifiers
By calling the internal function gst_gl_context_egl_fetch_dma_formats() the an
array of structures holding a DMA fourcc format and its modifiers (another array of
structure holing modifier and if it's external only) will be stored.

Users would call gst_gl_context_egl_get_format_modifiers() to get the array of
modifiers of a specific DMA fourcc format.

Co-authored-by: He Junyan <junyan.he@intel.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4680>
2023-05-30 20:09:27 +00:00
Seungha Yang
5a68831d74 video-blend: Fix linking error with C++
Add missing extern "C"

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4727>
2023-05-29 16:32:50 +00:00
He Junyan
e23964cb5f glupload: Fix a memory leak point in gst_egl_image_cache_unref()
The image cache itself should be freed when ref_count is 0.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4723>
2023-05-27 12:17:08 +00:00
Edward Hervey
d6f1c517f3 decodebin3: Handle changes in stream type
While decodebin3 could handle changes in inputs (ex: changing codecs), there was
still one limitation which was when changing between sources which had
non-intersecting stream types (ex: switching from a video-only source to a
audio-only source). While the decoder *could* change to the proper codec ... it
would carry on using a `DecodebinOutputStream` associated to that stream
type (and therefore with pads with the wrong name).

In order to handle this:

* We notify the `MultiQueueSlot` of the change in `GstStreamType` if it already
  had an associated inputstream (ex: the one associated with the static sink
  pad)

* We detect such changes on the output of multiqueue as soon as
  possible (i.e. when we get the GST_EVENT_STREAM_START for the new stream type)
  by discarding the associated output.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1669

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4703>
2023-05-25 21:23:21 +00:00
Edward Hervey
f51283b57b uridecodebin3: Also re-use decodebin3 static sink pad
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4703>
2023-05-25 21:23:21 +00:00
Edward Hervey
75d6621c2a videodecoder: Only use subframes internal values in subframe mode
This clarifies the usage of it, and fixes issues with reverse playback.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4694>
2023-05-24 18:50:56 +00:00
Edward Hervey
7a4916b251 videodecoder: Remove unused internal fields
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2552

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4694>
2023-05-24 18:50:56 +00:00
Edward Hervey
386a8dbae5 videodecoder: refactor and document finish_frame some more
* Move the in-flight iteration and handling code into the main block
* Document the intent a bit more

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4694>
2023-05-24 18:50:56 +00:00
Edward Hervey
bce9f3327d videodecoder: Refactor post-decode PTS/DTS recovery code
The code was a bit hard to follow. Use clear/explicity variable names and
comment a bit more on what is going on.

Also fold the double list iteration into a single one

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4694>
2023-05-24 18:50:56 +00:00
He Junyan
1e9e976268 videometa: Only validate the alignment only when it contains some info
When the alignment contains nothing, all its fields are 0 and always
can be satisfied. So there is no need to validate it in this case.
And there are a lot of places just setting this alignment to default
all zero value, this validation generates lots of warnings.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4674>
2023-05-24 16:22:21 +00:00
Nicolas Beland
3a9c103b58 alsasink: Fix stall for transition of alsasink from PAUSED to READY with USB speakerphone
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4642>
2023-05-24 11:16:06 +00:00
Guillaume Desmottes
58f80c180c uridecodebin3: notify when 'current-(sub)uri' properties are updated
Assume both uri and suburi are changed when the main item changes.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4543>
2023-05-24 09:28:58 +00:00
Thibault Saunier
7eca75130d encodebin: Plug a parser before timestamper
Timestamper might not support all stream formats so we need to make sure
some element is able to convert between those formats

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4122>
2023-05-22 15:10:52 +00:00
Seungha Yang
a8bf19deda video: convertframe: Add D3D11 specific conversion path
Add d3d11 conversion path to make gst_video_convert_sample() work
for GstD3D11Memory.

Note that just adding "d3d11download" to the exisitng code is
suboptimal from GstD3D11 point of view because:
* d3d11convert element can support crop/colorspace-conversion/scale
  all at once while existing software pipeline needs intermediate steps
  for the conversion
* "Process everything on GPU then download it to CPU memory" would be likely
  faster than "download GPU memory to CPU then processing it on CPU"

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2715>
2023-05-20 14:24:27 +00:00
Seungha Yang
9554a5c7fa video: convertframe: Remove pointless const qualifier
const keyword for refcounted object does not very make sense
and unnecessary in this case

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2715>
2023-05-20 14:24:27 +00:00
Philippe Normand
b2e121054d sdp: Add API to remove media from a SDP message
Based on initial patch by Stefano Buora.
https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/579

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4670>
2023-05-20 09:23:17 +01:00
Ruben Gonzalez
059965fe53 doc: Fix newline char between authors
Found running `gst-inspect-1.0 -a |& grep -v ":" | grep @`

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4682>
2023-05-20 05:48:23 +00:00
Haihua Hu
9f67b866b9 decodebin3: avoid identity, sinkpad, parsebin leakage when reset input
when reset_input, need remove identity/parsebin from decodebin3
when release_pad, need call free or reset input if collection
didn't change

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4664>
2023-05-19 16:24:08 +00:00
Matthew Waters
8003acf5bb gl: update docs for mixer move
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4608>
2023-05-18 19:34:15 +00:00
Matthew Waters
e9bf1c79cc glmixer: don't add rgba templates by default
Subclasses may want to override the pad template with different formats
or with a different pad subclass.

The original beahviour is still available by calling
gst_gl_mixer_class_add_rgba_pad_templates() in _class_init() of the
subclass.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4608>
2023-05-18 19:34:15 +00:00
Matthew Waters
fc85b63c2b glmixer: remove set_caps() vfunc
All of its implementors can be moved to gl_start/stop() from
GstGLBaseMixer instead.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4608>
2023-05-18 19:34:14 +00:00
Matthew Waters
331b1af468 glmixer: remove reset vfunc
This functionality is covered by GstGLBaseMixer's gl_stop() vfunc.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4608>
2023-05-18 19:34:14 +00:00
Matthew Waters
14e7e991d3 gl/mixer: make fbo instance field private and provide accessor function
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4608>
2023-05-18 19:34:14 +00:00
Matthew Waters
007a602726 gl: move gl(base)mixer to library
For use by applications/libraries outside of the opengl plugin.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4608>
2023-05-18 19:34:14 +00:00
Ruben Gonzalez
5c0f6b88d8 README.md: fix current version
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4662>
2023-05-18 06:25:50 +00:00
Haihua Hu
36333a5152 decodebin3: fix random hang when remove failing stream
When reconfigure_output_stream entry missing decoder path,
requested_selection should been update with what is really
active/selected immdiately with SELECTION_LOCK hold. So
use an optional message return from reconfigure_output_stream
and post it after release SELECTION_LOCK. This can make sure
other thread call to check_slot_reconfiguration will got
a correct requested_selection.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4599>
2023-05-16 12:43:12 +00:00
Michael Olbrich
b660f258a6 theoradec: make sure the selected pool accepts the new config
If gst_buffer_pool_set_config() fails then the pool will use its old
config. This may include different width or height when
pic_width/pic_height != frame_width/frame_height.
As a result, the assertions in theora_handle_image() will fail.

So check the result of gst_buffer_pool_set_config() and only use the pool
if it succeeds. Otherwise let the parrent decide_allocation() create a new
pool.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4600>
2023-05-12 14:37:06 +02:00
Michael Olbrich
802b3b9898 theoradec: add another assert to check the buffer size
If the buffer has no video meta then the meta is created from the local
data. In this case, the other asserts don't actually check anything. So add
another one to ensure that the buffer is actually large enough.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4600>
2023-05-12 14:37:06 +02:00
Michael Olbrich
9dd6b08fcc theoradec: remove unused codec state variable
The last user of this state was removed in 9a541157cf "theoradec: Fix
decoding in the presence of GstVideoCropMeta".

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4600>
2023-05-12 14:37:06 +02:00
Nirbheek Chauhan
681f042f27 meson: Install viv-fb GL headers, needed by i.MX
Needed by qmlglsink at build time to allocate a viv-fb display.

Without this, the GL fastpath doesn't work, and performance is really
bad.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4613>
2023-05-12 15:05:56 +05:30
Yinhang Liu
f04a1eee71 video: video-info-dma: Fix return value
The return value of gst_video_info_dma_drm_new_from_caps is a pointer type,
and should not return a boolean type. Fix this issue.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4612>
2023-05-12 15:38:08 +08:00
Piotr Brzeziński
5e45a1b1bd macos: Set activation policy in osxvideosink and glimagesink
Upon creating a window, glimagesink and osxvideosink now set the policy to
NSApplicationActivationPolicyRegular, which lets us show an icon in the Dock
for convenience and appear in the top menu bar like other apps.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4573>
2023-05-12 01:14:44 +02:00
Piotr Brzeziński
f60c87769f macos: Remove old NSApp workaround related code
This is no longer needed since the introduction of `gst_macos_main()` in 1.22.
Before that existed, we had a patch for GLib in Cerbero, which did work but made it
impossible to update GLib at all. The code being removed was a fail-safe in case of
running without said patch being applied. It's no longer needed, since for macOS
we just wrap our GStreamer with an NSApplication using `gst_macos_main()`.

Warnings will be displayed if no NSApp/NSRunLoop is found wherever needed,
pointing the user towards using the new API.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4366>
2023-05-11 20:30:19 +02:00
Sebastian Dröge
4cbd8d6fc6 pbutils: discoverer: Mark gst_discoverer_stream_info_get_stream_id() as nullable
It can return NULL in certain situations.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4572>
2023-05-08 15:26:58 +03:00
Jan Schmidt
e1faaefea0 glvideomixer: Implement force-live and min-upstream-latency properties
Proxy the force-live and min-upstream-latency propertyies to the internal
glvideomixerelement at construction time. force-live has to be set
during construction of the glvideomixerelement, so that has to be
deferred until the _constructed() call. Make sure that all other
existing proxied properties will still get set once the element
is created.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4494>
2023-05-02 22:47:38 +00:00
Thibault Saunier
40a6f2dc91 discover: Avoid double freee when creating info from cache file
Passing ownership to the function as the created info is made owner.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3911>
2023-04-29 06:54:10 -04:00
Thibault Saunier
0f229aa62a discoverer: Add serializing unknown stream type support
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3911>
2023-04-29 06:54:10 -04:00
Thibault Saunier
9e994ea616 discoverer: Add a signal to retrieve serialized GstDiscovererInfo
This allows user to serialize the GstDiscovererInfo in other places
than the default folder, like a database when running web services for
examples.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3911>
2023-04-29 06:47:55 -04:00
Edward Hervey
0db6149880 decodebin3: Handle streams without CAPS or TIME segment
decodebin3 will do its best to figure out whether a parsebin is required to
process the incoming stream.

The problem is that for push-based stream it could happen that the stream would
not provide any caps, resulting in nothing being linked internally.

Furthermore, there is the possibility that a stream *with* caps would not be
using a TIME segment, which is required for multiqueue to properly work.

In order to fix those two issues, we force the usage of parsebin on push-based
streams:
* When the pad is linked, if upstream can't provide any caps
* When we get a non-TIME segment

Fixes #2521

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4492>
2023-04-27 12:50:21 +00:00
Stéphane Cerveau
61416bc532 pbutils: add video/x-ivf to descriptions
Add missing description for video/x-ivf spotted
with gst-discoverer-1.0

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4248>
2023-04-27 06:45:27 +00:00
Hou Qi
aed4d31e67 decodebin3: fix segment fault when print decoder log
Segment fault happens when cannot find decoder but try to print
decoder name. Need to check the decoder.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4461>
2023-04-25 21:42:15 +08:00
Thibault Saunier
7aaf2b48ef doc: Avoid shelling out to hotdoc to generate plugins config files
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4479>
2023-04-25 02:57:55 +00:00
Jordan Petridis
791a068c58 build: appease clang warning
Clang complains about these variables being (possibly) unitialized, even
when they are assigned to NULL or proper value inside the macro.

Might as well initialize them to avoid the warning.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4281>
2023-04-24 12:37:07 +00:00
Thibault Saunier
b14e675a27 gir: Checkout all .gir files and check that they are updated on the CI
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3010>
2023-04-22 09:32:32 -04:00
Sebastian Dröge
6c429a5891 audiotestsrc: Initialize all samples in wave=ticks mode
Previously samples were only initialized in 2 out of 3 cases.

Probably fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-rs/-/issues/337

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4475>
2023-04-22 08:44:02 +00:00
Patricia Muscalu
c6bb20bba8 playsink: Fix volume leak
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4459>
2023-04-20 14:21:15 +00:00
Nicolas Dufresne
e709e2d97c meson: Add a wrap file for libgudev
And allow fallback to it.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4447>
2023-04-19 22:47:19 +00:00
Sebastian Dröge
83106de7e7 video: timecode: Add support for framerates lower than 1fps
These are not explicitly defined but the existing calculations can be
extended to also cover that case by inverting them to avoid floating
point calculations.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2465

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4374>
2023-04-17 10:26:11 +00:00
Mathieu Duponchelle
be208b9f50 docs: mark GstVideoConvertScale as plugin API
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4408>
2023-04-13 21:46:59 +00:00
Mathieu Duponchelle
15102e2eef docs: mark GstGLSinkBin as plugin API
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4408>
2023-04-13 21:46:59 +00:00
Jan Alexander Steffens (heftig)
77bc9b4a33 tests: allocators: Fix fdmem test with recent GLib
The test failed with recent GLib, where `g_close` emits a critical
warning on EBADF. Remove the `g_close` check from `test_fdmem` and add
another version that tests `GST_FD_MEMORY_FLAG_DONT_CLOSE`.

We will depend on the Valgrind test run to warn us about leaked FDs.

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2480
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4381>
2023-04-12 17:17:37 +00:00
Seungha Yang
5765eb8dce sdpmessage: Don't set "source-filter" to caps
Multiple "source-filter" can exist, and it requires special handling

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3485>
2023-04-12 16:32:07 +00:00
Matthias Fuchs
15b7c7ea25 glvideoflip: fix leaked caps
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4394>
2023-04-11 21:31:45 +00:00
Matthias Fuchs
769cc48e49 glcontext_wgl: fix missing unref
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4392>
2023-04-11 20:05:17 +00:00
Philippe Normand
4e4cb3bcf5 glbasesrc: Reverse order of error/debug messages
Addressing follow-up review from Tim in !4222, the first string is meant to be
shown to the user and should be translatable. The second one is more suited for
debugging purposes and should not be translated.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4389>
2023-04-11 12:28:27 +01:00
Tim-Philipp Müller
da4aa00d5b gst-plugins-base: update translations
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4388>
2023-04-11 09:21:18 +00:00
Sebastian Dröge
8ed0b03c78 appsink: Use a class handler callback instead of vfunc for propose-allocation
There would otherwise be no padding left in the class struct anymore and
we might need it for something else in the future.

A class handler callback can be overridden by subclasses via
`g_signal_override_class_handler()` and chained up via
`g_signal_chain_from_overridden_handler()`.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2422

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4356>
2023-04-06 15:21:35 +00:00
Sebastian Dröge
51a2adb837 allocators: drm-dumb: Annotate allocator instance parameters with the correct type
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4360>
2023-04-06 17:04:45 +03:00
Sebastian Dröge
edcb8e8f35 allocators: drm-dumb: Annotate device-path as a filename
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4358>
2023-04-06 15:41:27 +03:00
Rouven Czerwinski
7ad84674ab gst-plugins-base: gl: wayland: cleanup on close
The proxy and queue are created in the gst_gl_window_wayland_egl_open()
function and will be recreated on open. This leaks both objects, the
wayland client documentation mentions that they should be destroyed
using the appropriate destroy functions.

Found during valgrind memory leak testing, these blocks were marked as
definitely lost.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4354>
2023-04-06 08:09:36 +02:00
Guillaume Desmottes
84dea99132 appsrc: properly handle events received before sending the segment
The first serialized events that can be send on a src pad are a CAPS and then a
SEGMENT event.

When handling events from user in appsrc, we used to send a segment
automatically if the SEGMENT has not been sent yet.
This breaks if the CAPS event was not send either as we were now sending
a SEGMENT before the CAPS.

Fix this by delaying such events until the CAPS has been configured.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4297>
2023-04-05 11:11:46 +00:00
Guillaume Desmottes
4587a70998 tests: appsrc: test_appsrc_send_custom_event: check that event was actually received
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4297>
2023-04-05 11:11:46 +00:00
Guillaume Desmottes
4bffa7b537 appsrc: log when popping caps and buffer (list) from queue
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4297>
2023-04-05 11:11:46 +00:00
Sebastian Dröge
a17209220f sdp: Skip source-specific caps fields when creating an SDP media from caps
Regression from https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132

We parse the source-specific fields from the SDP and put it into the
caps, but when converting caps into an SDP again this would need special
handling. By default it would end up as part of the fmtp field, which is
simply wrong.

Automatically putting it into the caps and SDP will need some more work.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4338>
2023-04-05 05:20:33 +00:00
Seungha Yang
55db8367f7 tools: Count argc after parsing GOption on Windows
Existing codes rely on modified argc value by g_option_context_parse()
but g_option_context_parse_strv() is used in case of Windows.
Count arguments after the option parsing manually.
Fixing command "gst-inspect-1.0.exe -b"

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4313>
2023-03-31 18:11:52 +00:00
Robert Rosengren
6bb1257c99 alsasink: Fix for being stuck in stop_streaming_threads state
Moving from PLAYING to NULL will set the stop_streaming_threads to TRUE,
but when moving back upwards its not reset to FALSE (as only done in
uncalled init and resume callbacks).

Fix by reseting value in the prepare callback.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4309>
2023-03-31 16:51:11 +00:00
Ilie Halip
6846810f50 typefindfunctions: Increase xml typefinder closing brace limit
If the first XML element in a DASH manifest has its closing brance
beyond the first 512 bytes (because of, e.g. lots of attributes),
the MPD typefinder fails. Try to read a larger block, and then
smaller blocks until 512 bytes.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2385

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4241>
2023-03-29 17:50:20 +00:00
Bart Van Severen
65f953cd23 rtsp: gstrtspurl: gst_rtsp_url_get_request_uri: use rtsps scheme for tls transport methods
gst_rtsp_url_get_request_uri returns rtsp://... url when requested url is rtsps://, this is not
in accordance with https://www.rfc-editor.org/rfc/rfc7826.html#section-19.2.
This also impedes setting up a rtsps session with a live555 rtsp server.

Don't expose other than rtsp and rtsps internal gstreamer rtsp url schemes
to avoid regression:
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2412

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4294>
2023-03-29 11:38:47 +00:00
Bart Van Severen
c2b3afd3dd Revert "rtsp: gstrtspurl: gst_rtsp_url_get_request_uri: fix incorrect scheme for tls transport methods"
This reverts commit 024ef7659d because it causes a regression:
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2412

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4294>
2023-03-29 11:38:47 +00:00
Hugo Svirak
631c72b219 videorate: Fix incorrect drop value when drop_only is true
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4052>
2023-03-27 19:56:55 +00:00
Haihua Hu
8541d6b990 decodebin3: fix hang issue when remove failing stream
Need mark selection_update to true when update selection,
otherwise, pipeline will not handle this selection update
sometimes when this flag has been reset

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4277>
2023-03-27 13:52:42 +00:00
Shengqi Yu
96a46e31c7 appsink: add propose_allocation support
Adding propose_allocation is to meet the requirement of Application to
request buffers. Application sometimes need to create buffer pool
and request buffers to maintain buffer management itself, and Gstreamer plugin
import Application's buffers to use. So, add propose_allocation in
appsink like waylandsink and kmssink etc.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4185>
2023-03-27 12:34:16 +03:00
Tim-Philipp Müller
330836db8e taglist, plugins: fix compiler warnings with GLib >= 2.76
Fix compiler warnings about not using the return value when
freeing the GString segment with g_string_free(.., FALSE):

    ignoring return value of ‘g_string_free_and_steal’ declared with attribute ‘warn_unused_result’

which we get with newer GLib versions. These were all harmless.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4273>
2023-03-27 07:37:11 +00:00
Tobias Rapp
c467ac0869 gst-plugins-base: Add FourCC and type description for FFVHuff video
The FFVHuff video codec is a FFmpeg-specific variant of the lossless
HuffYUV codec with increased coverage of supported pixel formats and bit
depths.

Fixes #2389.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4250>
2023-03-23 14:30:59 +00:00
Sebastian Dröge
b1cb36e74c opusdec: Add support for decoding >8 channels
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4180>
2023-03-23 08:46:50 +00:00
Sebastian Dröge
d78bed99e8 opusenc: Use downstream channel configuration when using channel mapping family 255
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4180>
2023-03-23 08:46:50 +00:00
Sebastian Dröge
7e63427827 opusenc: Add support for encoding >8 channels and unknown/unpositioned layouts
This was kind of implemented before but missing a few pieces to actually
work correctly.

These configurations are mapped to channel mapping family 255.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4180>
2023-03-23 08:46:50 +00:00
Edward Hervey
0be233a446 uridecodebin3: Remove play items that were never connected
This is a follow-up of the previous commit that enabled support for redirection.

The problem is that the urisourcebin that emitted the error redirection never
produced any pads, and therefore was never linked to decodebin3. This resulted
in the code waiting for that (output) item to finally switch over ... which will
never happen.

The fix is done by removing it early if it was never connected to decodebin3.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4252>
2023-03-23 07:39:48 +01:00
Stéphane Cerveau
23661f0446 vulkan: gl: change symbols to static
Change window_proc and subclass_proc to static to avoid symbols
duplication.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4246>
2023-03-23 00:56:04 +00:00
Edward Hervey
133c4b2ff9 uridecodebin3: Handle redirection errors
This is done by doing an immediate switch to the redirection URI if compatible.

Fixes #1562

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4242>
2023-03-22 11:28:47 +00:00
Edward Hervey
095356b67e parsebin: Improve elementary stream handling
The goal of parsebin is to figure out which elements to link together in order
to provide elementary streams given any random input.

The problem is that deciding whether a given stream should still have more
elements plugged in or not was dependent on ... the presence of compatible
decoders (sic).

Instead of that, if we can't plug anymore elements on a given stream *and* it is
detected as being an elementary stream, expose it.

Fixes #2118

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4231>
2023-03-21 07:26:37 +00:00
Edward Hervey
cf3adbcfb3 urisourcebin: Activate pad before transferring sticky events
Otherwise they get refused since the pad is flushing

Fixes #2384 for good

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4226>
2023-03-20 18:11:26 +00:00
Edward Hervey
ee759fb4bf plugins: Fix wrong enum usage
gcc 13 now detects conflicting enum usages. Fix the various cases where it was wrong

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4225>
2023-03-20 11:40:30 +00:00
Philippe Normand
47b8618b2d glbasesrc: Reword error message
The initial glbasesrc implementation was based on a refactoring of gltestsrc,
but one error message wasn't updated accordingly and remained specific to the
gltestsrc implementation.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4222>
2023-03-19 16:39:18 +00:00
Piotr Brzeziński
e448888e1e allocators: Only build DRM allocator on Linux
This was causing issues when building the monorepo on macOS.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4208>
2023-03-19 13:45:37 +00:00
Sebastian Dröge
ccad9a7338 plugins: Fix various trivial clang compiler warnings
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4210>
2023-03-18 16:16:55 +02:00
Edward Hervey
7f1c5e2ef3 urisourcebin: Propagate sticky events from parsebin
If sticky events are present on parsebin source pads, we propagate them to the
multiqueue source pads. Those will be propagated on the new urisourcebin source
pads like in the other code paths.

This ensures that STREAM_START event are present on new source pads. If CAPS
event are also present (not guaranteed), they will also be available.

Fixes #2384

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4203>
2023-03-17 23:48:43 +00:00
Víctor Manuel Jáquez Leal
d6dd81dbdd video: remove spurious gst_caps_make_writable()
In gst_video_info_dma_drm_to_caps() the caps are newly created, so there's no
need for make it writable. In gst_video_info_dma_drm_from_caps() a copy of the
caps is done, which implies a gst_caps_make_writable().

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4195>
2023-03-17 13:01:02 +00:00
Tim-Philipp Müller
8759b77a50 gst-plugins-base: re-indent with GNU indent 2.2.12
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4182>
2023-03-17 03:18:53 +00:00
Nicolas Dufresne
7c7f2bb6df allocators: Add a DRM Dumb Allocator
This allow allocating memory from any DRM driver that supports this
method. It additionally allow exporting DMABuf. This allocator depends
on libdrm and will be stubbed if the dependency is missing. This is derived
from kmssink dumb allocator.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3801>
2023-03-14 21:50:57 +00:00
Carlos Falgueras García
76abb90477 gluploadelement: Delete unused types
`*GstGLUploadElementPrivate` is not defined or used anywhere.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4145>
2023-03-13 06:15:03 +00:00
Víctor Manuel Jáquez Leal
6c71654991 tests: add tests for GstVideoInfoDmaDrm
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4043>
2023-03-12 03:09:01 +00:00
He Junyan
67d0a911a5 video: add dma format and info helper functions
From the dmabuf.md[1], "drm-format" field in caps will replace the
traditional "format" field, so it needs to import some new helper
functions to support this.

1. https://gstreamer.freedesktop.org/documentation/additional/design/dmabuf.html

Co-authored-by: Yinhang Liu <yinhang.liu@intel.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4043>
2023-03-12 03:09:01 +00:00
Stéphane Cerveau
f6b2b716b2 timeoverlay: add buffer-count mode
This mode would allow to display the buffer
number received by the timeoverlay element.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3827>
2023-03-10 16:00:53 +00:00
Edward Hervey
b4cadf35bd uridecodebin3: Ensure atomic urisourcebin state change
When dynamically adding and synchronizing the state of urisourcebin, we need to
ensure that no-one else attempts to change the state in case of failures

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1803

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4125>
2023-03-08 09:29:57 +00:00
Nicolas Beland
8e77f89e86 alsasink: Fix stall when going from PLAYING to NULL (stucked at PAUSED) with uac1 gadget
This happened with a uac1 gadget which for some reason does not behave nicely.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4095>
2023-03-02 03:41:25 +00:00
Carlos Falgueras García
dafc024ed0 gldisplay: Remove unused code
The code related with environment variable `GST_GL_PLATFORM` is unused
since commit 33c60bdbf9.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4090>
2023-03-01 08:23:37 +00:00
Seungha Yang
5249b09e04 examples: win32-videooverlay: Fix for window freezing
Read and flush console buffer from the console thread immediately,
instead of main thread. Otherwise (if main thread is busy)
the console thread will keep adding idle source and then main thread
will be unresponsive.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4067>
2023-02-25 20:53:55 +09:00
Patricia Muscalu
35f1738875 rtspconnection: Annotate RTSP message parameters correctly
These parameters are not actually `out` parameters but must
be allocated and zero-initialized by the calling function.
Marking them as `out caller-allocates` will cause memory
corruptions when calling these APIs from e.g., Python code.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4051>
2023-02-23 12:04:37 +00:00
Tristan van Berkom
0472c306d0 gstglwindow_x11.c: Fix colormap leak
This fixes an X server side memory leak, this is normally not severe
but in some circumstances where the glwindow is recreated frequently
it can result in a very bad memory leak.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4047>
2023-02-22 16:29:06 +00:00
Tim-Philipp Müller
820247b3e8 gst-plugins-base: update translations
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4040>
2023-02-22 12:22:12 +00:00
Tim-Philipp Müller
898f0c5ba9 gst-play: update translated string
Make it more consistent with the other option descriptions.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4030>
2023-02-21 18:50:33 +00:00
Yang, Xuchen
a14f8008fb audio: channel-mix: Fix channel count limit to be able to equal 64
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3949>
2023-02-14 07:04:45 +00:00
Thibault Saunier
dc1c9c8985 glvideomixer: Keep a reference to the underlying pad
There was cases where we were accessing the pad while it was already
destroyed. Ensure it can't happen by owning a ref on it.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3916>
2023-02-13 22:23:13 +00:00
Edward Hervey
15bb6abeca gst-play: Don't force accurate seeking
This crept in several years ago sadly :(

The usage of accurate seeking should be reserved to use-cases where it is
essential that we seek to that position. This should not be the default.

There is a new option `--acurate-seeks/-a` to be able to force that.

Furthermore, if accurate seeks aren't required, a player should be using the
GST_SEEK_FLAG_KEY_UNIT flag to seek to the closest keyframe and provide the most
reactive experience.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3926>
2023-02-13 09:25:31 +00:00
Edward Hervey
3d506a0978 subparse: Properly forward segment seqnum
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3913>
2023-02-08 14:12:07 +00:00
Thibault Saunier
4067bbdd91 uridecodebin: Set source element to READY before querying it
Generating the source element is done when uridecodebin is doing the
READY to PAUSED state change, so it is reasonable to set the new source
element to that state.

This also allows detecting early failures with backing libraries or
hardware (checks done in NULL->READY).

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3857>
2023-02-08 11:07:21 +00:00
Philipp Zabel
485c8ef4b5 gleglimage: cache EGL images per DmabufUpload
Do not store cached EGL images in GstMemory QData. Instead, use a
per-DmabufUpload GHashTable to store cache entries with a weak
reference to the GstMemory.

This allows two glupload elements on separate tee branches to have
their own EGL image cache. For this pipeline:

  gst-launch-1.0 v4l2src ! tee name=t \
      t. ! queue ! glupload ! fakesink
      t. ! queue ! glupload ! fakesink

this gets rid of the occasional critical error message:

  GStreamer-CRITICAL **: 08:26:33.194: gst_mini_object_unref: assertion 'GST_MINI_OBJECT_REFCOUNT_VALUE (mini_object) > 0' failed

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3880>
2023-02-07 19:32:14 +00:00
Anders Hellerup Madsen
acb8f2ee5d glstereosplit: use gst_display_ensure_context
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3843>
2023-02-06 16:16:14 +01:00
Anders Hellerup Madsen
f0040149a0 glbasefilter: use gst_display_ensure_context
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3843>
2023-02-06 16:15:46 +01:00
Anders Hellerup Madsen
ecd9a4e37c glbasemixer: use gst_display_ensure_context
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3843>
2023-02-06 16:15:06 +01:00
Anders Hellerup Madsen
7bee4619dd glbasesrc: use gst_display_ensure_context
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3843>
2023-02-06 16:14:34 +01:00
Anders Hellerup Madsen
0da0da69aa gldisplay: Add gst_gl_display_ensure_context
See https://gitlab.freedesktop.org/gstreamer/gstreamer-rs/-/issues/439

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3843>
2023-02-06 16:14:07 +01:00
Seungha Yang
e1a22402d3 tools: Make sure UTF-8 encoded command line arguments on Windows
On Windows, arguments passed in main() are system codepage
encoded and might not be valid UTF-8 string.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3828>
2023-02-03 16:05:19 +00:00
Jan Schmidt
edd5911249 gl/cocoa: Return a strong ref to the parent GstGLContext
If the GstGLCAOpenGLLayer was initialized via a parent
context, make sure to ref the context before returning it
from getGLContext as all callers will unref it.

Follow up to !3729

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3881>
2023-02-02 13:53:07 +00:00
Georges Basile Stavracas Neto
a8a7ee6d83 glvideomixer: Add xalign and yalign properties
With the addition of the 'keep-aspect-ratio' sizing policy, content
that doesn't fit the target size is downscaled according to its own
aspect ratio to fit that target size, and centered.

Centering might not always be the desired behaviour, however;
consumers of this API might want to align the resulting picture to
the left or to the right.

To account for any of these cases, add two new properties to the
glvideomixer pad: xalign, and yalign. They operate on normalized
coordinates (0.0 for start, 1.0 for end), and default to 0.5 which
centers content.

<https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3762>

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3762>
2023-01-27 16:21:28 +00:00
Sebastian Dröge
c5d211d45a gldisplay: Mark gst_gl_display_create_context() other_context parameter as nullable
See https://gitlab.freedesktop.org/gstreamer/gstreamer-rs/-/issues/438

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3825>
2023-01-27 16:22:06 +02:00
Bart Van Severen
024ef7659d rtsp: gstrtspurl: gst_rtsp_url_get_request_uri: fix incorrect scheme for tls transport methods
gst_rtsp_url_get_request_uri returns rtsp://... url when requested url is rtsps://, this is not
in accordance with https://www.rfc-editor.org/rfc/rfc7826.html#section-19.2.
This also impedes setting up a rtsps session with a live555 rtsp server.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3568>
2023-01-26 07:46:59 +00:00
Bart Van Severen
a62b07f3b4 sdp: gstmikey: gst_mikey_message_to_caps: extract salt and append to srtp-key
A KEMAC can hold both key and salt, so if salt is present, we should extract it
and append it to the srtp-key cap because libsrtp expects the srtp-key to hold
the concantenated srtp master key and salt.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3568>
2023-01-26 07:46:59 +00:00
Bart Van Severen
5678151799 sdp: gstmikey: gst_mikey_message_to_caps: extract ROC from first crypto session
We need the ROC to decrypt a SRTP stream as the ROC is part of the AES IV.
So look for first crypto session, from which we can get the ROC and find corresponding
crypto policy.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3568>
2023-01-26 07:46:59 +00:00
Georges Basile Stavracas Neto
56513a18cb glvideomixer: Add 'sizing-policy' pad property
The sizing policy allows selecting between the current behavior,
which deforms the texture to fill the width and height of the
pad; and a new 'keep-aspect-ratio' sizing policy, which fits the
texture within the rectangle respecting its original aspect ratio.

The reason for this is that this allows avoiding extra elements
in the pipeline, and reduces the number of buffer passing through
the pipeline.

Most of this code is a direct port of the sizing policy handling
of the compositor element, except it is adapted to operate on GL
texture coordinates through the projection matrix.

<https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3760>

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3760>
2023-01-25 15:16:31 +00:00
Sebastian Dröge
0378bd3fed sdp: Fix gst_mikey_payload_key_data_set_interval() array length annotation
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1744

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3787>
2023-01-25 13:16:44 +00:00
Sebastian Dröge
20d394cb21 appsrc: Don't chain up BaseSrc::negotiate()
If we have caps then we can only set exactly those caps, if we have no
caps yet then negotiating anything is not very meaningful because the
caps are defined by the application and not downstream.

Avoids, among other things, an unnecessary allocation query and spurious
useless caps being set before the first buffer.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3757>
2023-01-24 21:44:51 +00:00
Thibault Saunier
77b6f58074 encodebin: Add timestamper elements when available
Timestamper elements are made to ensure stream timestamp are clean and
ready to be used by muxers, we should make use of them to cleanup
streams before muxing.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3779>
2023-01-24 16:31:40 +00:00
Tim-Philipp Müller
13f3feed04 libs: gl: drop use of GSlice
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3695>
2023-01-24 15:25:06 +00:00
Tim-Philipp Müller
d56648ccdb libs: video: drop use of GSlice
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3695>
2023-01-24 15:25:06 +00:00
Tim-Philipp Müller
df83590008 tag: drop use of GSlice
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3695>
2023-01-24 15:25:06 +00:00
Tim-Philipp Müller
58722ba48e libs: sdp: drop use of GSlice
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3695>
2023-01-24 15:25:06 +00:00
Tim-Philipp Müller
8bf59703a1 libs: pbutils: drop use of GSlice
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3695>
2023-01-24 15:25:06 +00:00
Tim-Philipp Müller
506c65aa27 libs: audio: drop use of GSlice
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3695>
2023-01-24 15:25:06 +00:00
Tim-Philipp Müller
11b47c4e29 fdmemory: drop use of GSlice
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3695>
2023-01-24 15:25:06 +00:00
Tim-Philipp Müller
7657b8cb51 tests: rtp: drop use of GSlice
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3695>
2023-01-24 15:25:06 +00:00
Tim-Philipp Müller
fd43b3d604 ximage, xvimage: drop use of GSlice
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3695>
2023-01-24 15:25:06 +00:00
Tim-Philipp Müller
8d7eb2eb4f typefindfunctions: drop use of GSlice
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3695>
2023-01-24 15:25:06 +00:00
Tim-Philipp Müller
0feb2770e6 encodebin: drop use of GSlice
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3695>
2023-01-24 15:25:06 +00:00
Tim-Philipp Müller
165fdac5c6 playback: drop use of GSlice
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3695>
2023-01-24 15:25:06 +00:00
Tim-Philipp Müller
a9c5a52b25 oggdemux: drop use of GSlice
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3695>
2023-01-24 15:25:06 +00:00
Tim-Philipp Müller
41c69372b5 Back to development
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3775>
2023-01-23 23:04:53 +00:00
Tim-Philipp Müller
f13c65d977 Release 1.22.0 2023-01-23 19:41:07 +00:00
Tim-Philipp Müller
8227b04429 gst-plugins-base: update translations
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3773>
2023-01-23 16:31:20 +00:00
Ruben Gonzalez
2cdfccc3b5 glvideomixer: Fixing error with mouse navigation events when no pixel-aspect-ratio
Handling mouse navigation events in glvideomixer element, if no
pixel-aspect-ratio info in the caps, an assertion error is produced
inside gst_util_fraction_multiply because default denominator is zero.

Error fixed:
```
(gst-launch-1.0:102654): GStreamer-CRITICAL **: 00:47:51.598: gst_util_fraction_multiply: assertion 'b_d != 0' failed
```

Simple pipeline to reproduce the issue:
```
gst-launch-1.0 -v glvideomixer name=mix ! glimagesinkelement  gltestsrc  ! mix.sink_0
```

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3766>
2023-01-22 00:52:56 +01:00
Edward Hervey
4c1d01ff57 playback: New playback elements are no longer experimental
The API is not expected to change and it has been used extensively since 1.18.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3761>
2023-01-21 12:28:21 +00:00
Edward Hervey
e2773304a2 decodebin3: Remove failing stream from selection
If no decoder is present for a given stream, remove it from the requested
selection.

Fixes #1581 and #1662

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3754>
2023-01-20 08:54:00 +00:00
Edward Hervey
34ea792881 decodebin3: Don't intercept queries if no parsebin present
If we don't use a parsebin, we forward the queries as-is from upstream. There is
no reconfiguration possible within identity.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3754>
2023-01-20 08:54:00 +00:00
Edward Hervey
1a30ed8113 decodebin3: Don't insert parsebin if input is already parsed
This is a temporary workaround until we find a generic solution to indicate that
a stream has already been "parsed".

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3754>
2023-01-20 08:54:00 +00:00
Guillaume Desmottes
2930fed373 gst-play: add --no-position
It can be useful to reduce or remove the clutter in logs due to those
queries when debugging.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3698>
2023-01-19 11:41:20 +00:00
Nicolas Dufresne
8a6d9748b6 gleglimage: Fix GL_OES_EGL_image_external name in debug trace
There is a debug log when this extension is missing, but it was
reporting the wrong extension name, which was confusing.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3748>
2023-01-18 22:47:42 +00:00
Michiel Konstapel
81b726344e glvideomixer: don't clear pad->geometry_change when setting an identical value
Closes #1715

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3733>
2023-01-18 14:05:37 +00:00
Tim-Philipp Müller
64c4bfdf7e uridecodebin3: clear subitem if suburi is set to NULL
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1649

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3730>
2023-01-18 11:43:31 +00:00
Nirbheek Chauhan
ed1bdf9b1a gl: Fix crash in cocoa due to race in gst_gl_context_activate()
We create a new context in `gst_gl_context_create_thread()` and then
activate it on the current thread. Thereafter we assume that the
current thread continues to be the active thread for that context and
call `gst_gl_context_fill_info()` which asserts that the current
thread is the active thread.

However, if at the same time a different thread calls
`send_message_async()`, it will call into
`gst_gl_window_cocoa_send_message_async()` which will schedule the
message to be invoked using GCD. That anonymous function will also
call `gst_gl_context_activate()`, which creates a race, which can lead
to:

```
gst_gl_context_fill_info: assertion 'context->priv->active_thread == g_thread_self ()' failed
```

Fix it by using `gst_gl_context_thread_add()` to invoke `fill_info()`
on the context.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3732>
2023-01-17 21:56:41 +00:00
Sebastian Dröge
086c8da446 gl/cocoa: Store a weak reference to the GstGLWindow instead of the GstGLContext
We can't rely on the `GstGLContext` to stay alive and need to keep track
of it. For that we keep track of the `GstGLWindow` in a weak reference
to avoid a reference cycle, and get the corresponding `GstGLContext`
whenever needed.

With contributions from Nirbheek Chauhan.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1697

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3729>
2023-01-17 22:35:29 +05:30
Tim-Philipp Müller
a9ec35b1ca Release 1.21.90 2023-01-13 19:08:48 +00:00
Edward Hervey
13ad8c8e4e urisourcebin: Cleanup on failure
This ensures there is a source present/valid *ONLY* in PAUSED and above.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3720>
2023-01-13 16:41:53 +01:00
Edward Hervey
1546ab0d0f urisourcebin: Unset locked state
Some elements still had it in failure cases

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3720>
2023-01-13 16:41:53 +01:00
Edward Hervey
f444e62672 uridecodebin3: Handle state synchronization failures
Properly reset and remove the failing urisourcebin if we failed bringing them up
to the same state as ourselves.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1708

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3720>
2023-01-13 16:41:53 +01:00
Thibault Saunier
d8ba721d82 glbasefilter: Copy metas when they only contain they "video" tag
Same logic as in `GstVideoFilter`

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3716>
2023-01-12 14:41:24 -03:00
Edward Hervey
1fe99ebae1 decodebin3: Fix global group-id handling
The goal of the "global" group-id is to fix new inputs that do not come from the
same "source" as others. In order to ensure all "current" streams have the same
group-id we distribute the first valid group-id to all streams.

This commit fixes two issues with that:

* When inputs are unlinked they weren't always properly resetted (it would only
  work if parsebin is used, which is no longer the default in
  uridecodebin3/playbin3).

* When computing the global group-id, take into account unset
  group-id (i.e. GST_GROUP_ID_INVALID).

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1698

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3712>
2023-01-11 23:29:05 +00:00
Tim-Philipp Müller
d803bf852f gst-plugins-base: update translations
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3711>
2023-01-11 19:20:17 +00:00
Tim-Philipp Müller
a1672ec004 Fix translation pot files when creating dist tarballs
Add version as per Translation Project requirements and
also add a .pot file without the ABI suffix.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3711>
2023-01-11 19:20:17 +00:00
Guillaume Desmottes
22917b140f decodebin3: ensure recalculate_group_id() is called with INPUT lock
This function uses main_input and current_group_id which are protected
by the input lock.
Some calls were already safe but not all.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3702>
2023-01-11 18:37:05 +00:00
Guillaume Desmottes
cad0768191 uridecodebin3: fix stream leak
GstSourcePad owns the GstStream but was not unreffing it when being
disposed.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3617>
2023-01-11 16:44:21 +00:00
Guillaume Desmottes
da696477c6 decodebin3: fix dead lock when removing pad
gst_element_remove_pad() is triggering a call to
gst_decodebin3_input_pad_unlink() which needs the input lock as well,
resulting in a dead lock.

Fix #1667

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3614>
2023-01-11 15:06:37 +00:00
Sebastian Dröge
c28bc4492e tools: Use gst_macos_main() on macOS
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1673

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3709>
2023-01-11 13:36:55 +00:00
Tim-Philipp Müller
d2ef7819d3 tests: interactive: test-effect-switch: use autovideosink
Also works on Windows.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3703>
2023-01-10 13:28:30 +00:00
Tim-Philipp Müller
1b7c95ec01 gst-play: fix command line option string formatting
Add missing space to translated string.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3696>
2023-01-09 01:24:57 +00:00
Mathieu Duponchelle
2f020013e6 docs: explicitly declare gir build dependencies
As the path to the gir file is passed to hotdoc.generate_doc() and
not the build target itself, meson doesn't know about the dependency.

In turn, as the CI doesn't build everything before building the
documentation target, some gir files might not exist, for instance
in the case of gst-rtsp-server, causing the output documentation to
be empty.

The error occurred silently because hotdoc accepts wildcards for
*-sources arguments, thus it won't warn about a missing gir file as
it is legitimate for glob matching to resolve to nothing.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3686>
2023-01-06 22:50:57 +00:00
Sebastian Dröge
fa2b98f957 typefindfunctions: Add missing length check to XML typefinder
Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=54811

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3690>
2023-01-06 18:10:20 +02:00
Sebastian Dröge
54ff9b2b5f typefindfunctions: Reduce XML typefinder minimum data size from 64 to 32 bytes
64 bytes makes the typefinder fail on very small XML documents on which
it succeeded previously.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3690>
2023-01-06 14:37:31 +02:00
Sebastian Dröge
37f219bd57 opusdec: Try harder to negotiate the upstream channels/rate preferences
It might be possible to fulfill those but not with the first caps
structure. Instead of just fixating the first caps structure, check if
the preference can be fulfilled by any of the structures as the first
step.

Without this the following pipeline negotiates to mono after the
decoder because opusenc only has a single channel in its first caps
structure.

    gst-launch-1.0 audiotestsrc ! audio/x-raw,channels=2 ! opusenc \
        ! queue ! opusdec ! queue ! opusenc ! fakesink

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3689>
2023-01-05 17:59:41 +02:00
Sebastian Dröge
516fe4ca58 Revert "opusenc: Reverse channel order in template caps"
This reverts commit cdf411e82d. It causes
pipelines to unnecessarily negotiate to 8 channels.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1688

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3689>
2023-01-05 17:57:19 +02:00
Olivier Crête
f97ff39358 audioenc/dec: Avoid adding temporary structure
As a minor optimisation

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3673>
2023-01-04 11:09:31 +00:00
Olivier Crête
e03a10a0f2 audioenc/dec: Preserve downstream caps preference in get caps
This should fix pipelines such as this one to work as expected
  ... ! opusenc ! capsfilter caps='audio/x-opus,
  channels=1; audio/x-opus, channels=2' ! ...

The expectation is that the encoder will propose the first structure
before the second one to the source.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3673>
2023-01-04 11:09:31 +00:00
Sebastian Dröge
401ea9f683 typefindfunctions: Check for the SVG namespace URL in addition to <svg and the doctype
Finding the SVG namespace URL gives a clear indication that this is
actually an SVG file while the `<svg>` tag only gives a likely
indication as it's rather short.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1540

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3631>
2023-01-04 00:49:47 +00:00
Sebastian Dröge
11520403a5 typefindfunctions: Make XML typefinder more strict
If a XMLDec is found, check also for its end. Similarly, check for the
end of the XML tag we're looking for and make sure that the following
characters are valid.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1536

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3632>
2023-01-03 12:07:43 +00:00
Edward Hervey
6beca9f055 urisourcebin: Fix parsebin handling
The goal of !3601 was to make sure we don't end up with non-streams-aware
adaptive demuxers. Since we know that parsebin is streams-aware, just remember
that and handle them that way.

Fixes issues with some scenarios where parsebin might add pads *before* the
collection is posted on the bus

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1675

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3658>
2022-12-30 08:46:14 +01:00
Edward Hervey
66b96baf23 uridecodebin3: Fix handling of "expected" pads
The number of expected pads was:
* Defaulting to 1
* Or being overriden by GST_MESSAGE_STREAMS_SELECTED

This fails if upstream isn't a selectable source and has multiple streams, and
would therefore cause failures with multi-stream gapless playback

Fixes #1672

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3658>
2022-12-30 08:46:14 +01:00
Edward Hervey
80e7c31514 uridecodebin3: Avoid repeatedly calling the blocking probe
When skipping an event, we want to unref it and say we handled it. This avoids
being repeatedly called for the same (sticky) events.

The events will be properly propagated once the pad is linked.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3658>
2022-12-30 08:46:13 +01:00
Edward Hervey
a0655d5131 uridecodebin3: Handle multiple pending pad block probes
It is quite possible to have the blocking probe called from different streaming
threads when all expected pads are present.

* Notify all waiters by using g_cond_broadcast instead of g_cond_signal
* Properly remove the probe after waiting

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3658>
2022-12-30 08:46:13 +01:00
Sebastian Dröge
19603248c2 gl: Mark gst_gl_context_new_wrapped() return value as nullable
If a GL context is requested for which no API support is compiled in
then `NULL` is returned.

Also remove a useless `NULL` check: `g_object_new()` can't possibly
return `NULL`, ever.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3656>
2022-12-29 09:03:53 +00:00
F. Duncanh
b713c141e0 plugins-base/tests/check/meson.build: add omitted Wayland dependence
SUSE places Wayland include files in /usr/include/wayland, and needs
a Cflag added to wayland_client_deps by pkg-config, which is added to
gl_winsys_deps: add this as a dependency in gstgl_dep to fix issue.

Fixes #1607

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3638>
2022-12-28 20:04:49 -05:00
Nirbheek Chauhan
36a619ba60 meson: Add gstreamer-gl-1.0 pkgconfig vars to internal dependency
So we can fetch gl_winsys, gl_platforms, etc directly using
gst_gl_dep.get_variable() when building gstreamer as a subproject, or
when building gst-plugins-rs's gtk4 plugin.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3654>
2022-12-29 03:52:42 +05:30
Xavier Claessens
cd78cbac86 Fix API visibility macros
This copies the logic from GLib discussed there:
https://gitlab.gnome.org/GNOME/glib/-/merge_requests/2936

Beside being simpler, it also fix all public symbols being annotated
with dllexport when doing a static build, as discovered there:
https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3540#note_1678335

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3567>
2022-12-20 14:03:35 +00:00
Edward Hervey
74a503c197 urisourcebin: Modify check for streams-aware adaptive demuxers
Using the "GstBin" flags to check if an adaptive demuxer is streams-aware isn't
a good idea since it prevents using elements which aren't bins.

Instead we see if a collection was posted by the demuxer by the time a pad is
added.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3601>
2022-12-19 15:23:32 +00:00
Philipp Zabel
2a602afe8a videoconvertscale: fix valid_tags NULL-terminated array of strings
The valid_tags array of strings must be NULL-terminated,
as it is passed to the g_strv_contains() function.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3603>
2022-12-19 15:30:42 +01:00
Guillaume Desmottes
1f929ba32f uridecodebin3: fix typo in doc
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3602>
2022-12-19 14:24:06 +01:00
Thibault Saunier
f7b342f1dd base:navigation: Cleanup navigation key modifiers enum
We were exposing the 'ALT' modifier as if we were guaranteeing its
accuracy but truth is we were only exposing configuration dependent
values.

Make the API simpler for now, the same way as Gtk3 was exposing it, and
when we have time to guarantee more values by making them take backends
configuration into account, we will expose those values in a accurate
way.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1402

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3565>
2022-12-15 16:47:13 +00:00
Matthew Waters
e59b3c93c7 glupload: add CAN_ACCEPT_RAW to all dma-buf uploaders
Fixes cases where a dma-buf would be uploaded using direct-dma-buf
into an external-oes texture (using video/x-raw caps) and then
attempting to reconfigure the same source.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3486>
2022-12-14 23:45:56 +00:00
Guillaume Desmottes
e87a2c38c0 glvideomixer: override sink pad template
Allow us to pass the GType of its pad and so
improve the documentation when inspecting glvideomixer.

Fix #1253

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2527>
2022-12-14 12:50:36 +00:00
Philippe Normand
d98c78251c video-format: Add macro checking for validity of GstVideoFormatInfo
Mostly to maintain consistency with the GST_AUDIO_FORMAT_INFO_IS_VALID_RAW
macro.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2800>
2022-12-12 19:39:10 +00:00
Philippe Normand
3345d16aed audio-format: Add macro checking for validity of GstAudioFormatInfo
`gst_audio_format_info_fill_silence()` not properly checking the validity of its
input may lead it into an infinite loop.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2800>
2022-12-12 19:39:10 +00:00
Tim-Philipp Müller
b9d8fb3d63 timeoverlay: fix pad leak
Spotted by Jiri Uncovsky.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1336>
2022-12-11 23:54:50 +00:00
Sebastian Dröge
010ede30dd textrender: Negotiate caps on a GAP event if none were negotiated yet
Otherwise downstream wouldn't have received a segment event either and
wouldn't know what to do with the gap event

And also forward any pending segment event.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3541>
2022-12-07 14:27:17 +00:00
Tim-Philipp Müller
1f65d7cc5c Back to development 2022-12-05 02:29:08 +00:00
Tim-Philipp Müller
fd6a3948c6 Release 1.21.3 2022-12-05 01:28:21 +00:00
Tim-Philipp Müller
84e74ceb10 Remove ChangeLog files from git repository
This information is tracked fully in the git repository, so
no point having the ChangeLog duplicate it, and it interferes
with grepping the repository.

We are going to create the ChangeLogs on the fly when generating
tarballs going forward (with a limited history), since it's still
valuable for tarball consumers to be able to easily see a list of
recent changes.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer-project/-/issues/73

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3521>
2022-12-04 18:16:25 +00:00
Tim-Philipp Müller
9eb081ea0a meson: Generate ChangeLog files for release tarballs on dist
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3521>
2022-12-04 18:16:25 +00:00
Edward Hervey
36c3bb0d05 uridecodebin3: Protect against NULL uri/suburi
Fixes #1625

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3511>
2022-12-02 16:55:05 +00:00
Edward Hervey
41017e6c34 uridecodebin3: Always store pending buffering messages
Fixes #1586

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3487>
2022-12-02 09:22:41 +00:00
Vivia Nikolaidou
a0e61539f8 opusdec: Use proper guint/guint8 type conversion
Do not cast, that might yield wrong results.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3494>
2022-11-30 21:11:55 +02:00
Vivia Nikolaidou
c9afaf5cd9 opusdec: Negotiate default to 2 channels
In that place, dec->n_channels can still theoretically be 0. Default to
2 in that case.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3494>
2022-11-30 20:56:30 +02:00
Vivia Nikolaidou
cdf411e82d opusenc: Reverse channel order in template caps
We want to make it so that we prefer a higher, not lower, number of
channels. Otherwise, this pipeline would convert from 2 to 1 channels:

gst-launch-1.0 audiotestsrc ! audio/x-raw,channels=2 ! opusenc ! queue ! opusdec ! queue ! opusenc ! fakesink

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3494>
2022-11-30 20:52:05 +02:00
Philippe Normand
fa863b2b7f audiodecoder: Make data processing errors non-fatal by default
The previous default value of `max-errors` was too small and would potentially trigger the
decoder to emit errors too often for most cases.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3478>
2022-11-30 10:27:50 +00:00
Philippe Normand
9e5cce0ab9 videodecoder: Make data processing errors non-fatal by default
The previous default value of `max-errors` was too small and would potentially trigger the
decoder to emit errors too often for most cases.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3478>
2022-11-30 10:27:27 +00:00
Sebastian Dröge
12aa3925d0 sdpmessage: Annotate SDP message parameters for parse_uri() and parse_buffer() correctly
They are not actually `out` parameters but must be allocated and
initialized to a valid SDP message by the caller. Just allocating them
without initialization will cause memory corruptions because the
functions will try to clear/append to the existing SDP message.

As such they should be just marked as `transfer none`.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1605

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3484>
2022-11-29 14:02:55 +02:00
Ignacio Casal Quinteiro
2aa34164f6 sdp: use g_strdup instead of strdup
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3475>
2022-11-28 09:36:18 +00:00
Nicolas Dufresne
b985c8eadd glimagesink: Fix render rect assertion
Whenever the surface is resized before the stream is negotiated, we endup
with an assertion in libgstvideo.

  gst_video_center_rect: assertion 'src->h != 0' failed

This fixes it, by following the style aready in place, which is to ensure
surfaces have a minimum size of 1x1.

Fixes #1139

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3467>
2022-11-28 07:52:25 +00:00
Tim-Philipp Müller
dec3aa55e9 audioconvert, audioresample, audiofilter: fix divide by 0 for input buffer without caps
gst-launch-1.0 audiotestsrc ! udpsink host=127.0.0.1
gst-launch-1.0 udpsrc ! audioconvert ! autoaudiosink

would crash with a floating point exception when clipping the input
buffer owing to a division by zero because no caps event was received.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3469>
2022-11-26 08:47:49 +00:00
Edward Hervey
3a63eab2fa uridecodebin3: propagate about-to-finish for new inputs
If the pending next urisourcebin is already draining, make sure we propagate it
when activating it.

Fixes gapless playback of small entries

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1588

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3457>
2022-11-23 12:19:22 +00:00
Edward Hervey
def2515ae2 uridecodebin3: Remove old fixme
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3457>
2022-11-23 12:19:22 +00:00
Edward Hervey
734a4554f3 (uri)decodebin3: Ensure group-id consistency
Make sure that group-id of a given play item are made consistent from the
start (sources) and all the way through the output.

This ensures that we can reliably detect that we have switched to the next play
item on the output of decodebin3 (and we can therefore properly free/release it)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3457>
2022-11-23 12:19:21 +00:00
Edward Hervey
353691602e uridecodebin3: Fix shutdown procedures in probe
When shutting down, we want to remove the urisourcebin blocking probes ... but
we also want to propagate a GST_FLOW_FLUSHING upstream (and not
GST_FLOW_NOT_LINKED) to make the upstream task gracefully stop instead of
posting an error message.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3457>
2022-11-23 12:19:21 +00:00
Edward Hervey
7f5f7b3a77 decodebin3: Properly reset when going back to READY
Clear the remaining stream-related fields when going from PAUSED to READY, and
use when disposing.

Fixes various issues when re-using decodebin3/playbin3

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3457>
2022-11-23 12:19:21 +00:00
Edward Hervey
d12534d21d decodebin3: Don't output bogus GST_MESSAGE_STREAMS_SELECTED
When `is_selection_done` is called, it checks that all the requested streams are
present in the active stream list ...

... except there could very well be a (about to be removed) stream from the
previous selection present.

Therefore filter the list of streams we add to the message by the streams which
are actually requested.

Fixes issues when switching between different stream types (ex: video-only to
audio-only).

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3457>
2022-11-23 12:19:21 +00:00
Edward Hervey
948bc4291c oggdemux: Don't leak pending seek event
Make sure any pending seek event is released when going back down to READY.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3443>
2022-11-21 19:02:44 +00:00
Edward Hervey
1774d5c87a parsebin: Don't leak parsepad list on shutdown
Free it as it is down in other cases

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3443>
2022-11-21 19:02:44 +00:00
Sebastian Dröge
7af129b755 textrender: Don't pass plaintext as pango markup to Pango
Otherwise e.g. & in the text will cause Pango to complain about invalid
markup and render the text incorrectly.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3445>
2022-11-21 18:47:50 +02:00
Sebastian Dröge
5b1a1c41b6 textrender: Don't blindly forward all events
Use gst_pad_event_default(), which does the right thing by default.
Especially it does not forward text/x-plain caps downstream.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3445>
2022-11-21 18:43:54 +02:00
Matt Crane
b11169bd32 rtpbasedepayload: Drop redundant reference timestamp buffer meta in RTP depayloaders
Currently, when rtspsrc property add-reference-timestamp-metadata=true,
a downstream rtph264depay element will attach multiple copies of the
same GstReferenceTimestampMeta to the depayloaded media buffers. This
can have signficant performance impacts further downstream in a pipeline
like the following:

    rtspsrc add-reference-timestamp-metadata=true ! rtph264depay ! h264parse ! ... ! rtph264pay ! ...

For example, if there are 10 packet buffers for a frame of RTP H.264
video, each of those packet buffers will contain the same reference
timestamp meta. The rtph264depay element will then attach all 10
metadata to the depayloaded frame. And then later when we payload the
frame buffer again for proxying, we now have 10 more buffers each with
10 instance of the same metadata. Allocating/deallocating 100+ instances
of metadata @ 30fps for multiple streams has a pretty large performance
impact.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1578

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3431>
2022-11-19 07:57:44 +00:00
Nicolas Dufresne
e60a94c27d video-frame: Avoid using tile width
The tile width in pixel is not always available. Notably for
8L128 10bit format, the tile is 8x128 bytes, and the pixel
format is fully packed. That means that the tile contains at
least 6 pixels per line, but it also hold some bits of the
pixel from the same line on the previous or next tile.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3424>
2022-11-18 22:59:29 +00:00
Nicolas Dufresne
5980fb76e7 video: Add arbitrary tile dimensions support
In current tile representation, only tiles with power of two
width and height in bytes are supported. This limitation
prevents adding more complex tiles formats.

In this patch, we deprecate tile_ws and tile_hs from GstVideoFormatInfo and
replace if with an array of GstVideoTileInfo. Each plane tiles are then
described with their pixels width/height, line stride and total size.
The helper gst_video_format_info_get_tile_sizes() that depends on the
deprecated API is also being removed. This can simply be removed as it wasn't
in any stable release yet.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3424>
2022-11-18 22:59:29 +00:00
Mathieu Duponchelle
b5cd758230 aggregator: Implement force_live API
Setting force_live lets aggregator behave as if it had at least one of
its sinks connected to a live source, which should let us get rid of the
fake live test source hack that is probably present in dozens of
applications by now.

+ Expose API for subclasses to set and get force_live
+ Expose force-live properties in GstVideoAggregator and GstAudioAggregator
+ Adds a simple test

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3008>
2022-11-18 18:14:26 +00:00
Edward Hervey
db2146d0ea decodebin2: Minor debug fix for decodepad
decodedad might have their name changed when exposing, causing a race when
trying to get their name without taking a lock. Just use GST_PTR_POINTER in
debug statements instead

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3428>
2022-11-18 07:22:23 +00:00
Edward Hervey
92abb8daec urisourcebin: Remove un-needed define
This code hasn't use GValueArray in ages

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:47 +00:00
Edward Hervey
5702568a7e urisourcebin: Use a non-buffering multiqueue for non-streamable URI
Even though buffering is not required, we need to ensure we are dealing with the
interleave (if any) before pushing the elementary streams further downstream.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:47 +00:00
Edward Hervey
c59397354c urisourcebin: Minor doc fix
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:47 +00:00
Jan Schmidt
6e549b2fe5 uridecodebin3: Don't leak EOS event
Make sure to unref the EOS event in all code paths
when returning GST_PAD_PROBE_HANDLED

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:47 +00:00
Edward Hervey
6bffbe283a playbin3: Move gapless to uridecodebin3
This was the intention from the start, just took me a few years *cough* to
actually implement it properly.

Gapless is handled by re-using as much as possible the same decoders and sinks
if present, and only pre-rolling switching at the sources level (with buffering
if/when needed).

In order to enable "gapless" playback, the "next" uri should be set at any time
between the moment the `about-to-finish` signal is emitted and the moment the
current play item is done. Previously this could only be done with the signal
emission.

This new implementation also allows "Instantaneous URI switching". This allows a
much faster way of switching playback entries while re-using as many elements as
possible. To enable this set `instant-uri` property to TRUE, the default being
FALSE.

API: instant-uri properties
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:47 +00:00
Edward Hervey
1f2d98028b playbin3: Remove unused code
This was never used, and if ever it's needed at some point for reference it's
available in gstplaybin.c

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:47 +00:00
Edward Hervey
78e43a6319 decodebin3: Clear input collection when linked again
The previous collection no longer applies to this input

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:47 +00:00
Edward Hervey
8ce0a23a5e decodebin3: Improve collection merging
If the collections are the same, don't merge them

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:47 +00:00
Edward Hervey
0bb2026890 decodebin3: doc cleanup
Remove old/invalid FIXME and cleanup some logs

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:47 +00:00
Edward Hervey
4bfbc72663 decodebin3: Remove unused variable
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
f785b3d584 decodebin3: Allow re-using inputs
DecodebinInput (and their backing parsebin or identity) are no longer released
when the corresponding sinkpad is unlinked, but when it's released.

The parsebin element will be resetted:
* If incoming caps are incompatible (was the case before)
* Or when unlinking and it was previously pull-based

This opens the way to use decodebin3 with changing inputs (i.e. gapless)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
1f8d8b2df6 uridecodebin3: use urisourcebin parse-streams property
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
412c4cbca3 urisourcebin: Improve buffering handling
Introduce the option to have the streams be parsed with `parsebin` for
compatible sources (i.e. which are eligible for buffering in the same way as
before this commit).

By parsing the inputs directly, this allows more accurate buffering control:
* Instead of relying on potential bitrate information coming from somewhere
* and *without* being linked downstream

If `parse-streams` is activated and the stream is eligible for buffering, then a
`multiqueue` will be used on the output of `parsebin` in order to handle the
buffering.

API: `parse-streams`
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
fa4a70d7fe parsebin: avoid bogus processing
If a parsebin pad is already exposed, don't try to rename it or cause extra
processing which isn't needed

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
5e2606cacd decodebin3: Avoid parsebin usage if not needed
If the incoming streams are already parsed, there is no need to add yet-another
parsebin to process it *IF* that stream is compatible with a decoder or the
decodebin3 output caps.

This only applies if all the following conditions are met:
* The incoming stream can *NOT* do pull-based scheduling
* The incoming stream provides a `GstStream` and `GstStreamCollection`
* The caps are compatible with either the decodebin3 output caps or a decoder
  input

If all those conditions are met, a identity element is used instead of a
parsebin element and the same code paths are taken.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
f010dce6e7 decodebin3: DecodebinInputStream: Hold a ref to srcpad
And move the locking outside of the input stream creation function

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
e8f768212c urisourcebin: Bring high-watermark level in sync with legacy values
It was always 60%. For some reason this crept in during the initial urisourcebin
refactoring.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
b589cf12f2 decodebin3: Don't leak collection when releasing inputs
And refactor the function slightly for clarity

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
e276d3c836 decodebin3: Protect input freeing with the input lock
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
f091d2445f decodebin3: Refactor parsebin output handling
* Instead of creating temporary `PendingPad` structures, always create a
  DecodebinInputStream for every pad of parsebin
* Remove never used `pending_stream` field from DecodebinInputStream
* When unblocking a given DecodebinInput (i.e. wrapping a parsebin), also make
  sure that other parsebins from the same GstStreamCollection are unblocked
  since they come from the same source

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
d14c14dcc4 decodebin3: Store GstStreamCollection from upstream
If upstream provides stream collection, use/store them as soon as possible

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
64d775a44f urisourcebin: Move adaptive demuxer handling into ChildSrcPadInfo
It's part of that chain of elements

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
a5f0085cda urisourcebin: Only remove components in PAUSED->READY
With the refactoring, we are guaranteed the components are only created in PAUSED

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
5b41ea2fe8 urisourcebin: Refactor ChildSrcPadInfo and OutputSlot usage
Make an explicit topology/tree of structures:
* ChildSrcPadInfo is created for each source element source pad
* ChildSrcPadInfo contains the chain of optional elements specific to that
  pad (ex: typefind)
* A ChildSrcPadInfo links to one or more OutputSlot, which contain what is
  specific to the output (i.e. optional buffering and ghostpad)
* No longer use GObject {set|get}_data() functions to store those structures and
  instead make them explicit
* Pass those structures around explicitely in each function/callback

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
f42ca96ad9 urisourcebin: Remove duplicate call
We ensure sources are removed in PAUSED->READY->NULL. No need to call it when
creating the source.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
64c81b6972 urisourcebin: Remove pending pad handling
This was needed to support the legacy handling of changing streams (add new
pads, send EOS and remove old pads).

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
b6584defd0 urisourcebin: Only expose pads once activation has completed
The following problem could happen:
* Thread 1 : urisourcebin gets activated from READY->PAUSED
* Thread 2 : some element causes a pad to be added to urisourcebin , which gets
linked downstream, which decides to activate upstream to pull-based.
  * That requires "activating" the pads from PUSH to NONE, and then from NONE to PULL
* Thread 1 : the base class state change handlers checks if all pads are
activated

The issue is that since going form PUSH to PULL requires going through NONE,
there is a window during which:
* Thread 1 : The pad was set to NONE (before being set to PULL)
* Thread 2 : The base class activates that pad (to PUSH)
* Thread 1 : The attempt to "activate" to PULL fails (silently or not)

This is very racy, so in order to avoid that, we make sure that we only add pads
once the transition from READY->PAUSED in the parent classes is done.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
a347846698 urisourcebin: Only allow streams-aware adaptive demuxer
We no longer want to deal with elements that use the old-style of stream
switching and instead expose/remove streams as they appear/disappear

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
e7eb9271ee urisourcebin: Simplify initial information collection
When iterating existing pads of a source, directly handle them:
* Raw pads are handled directly
* Pads without caps are connected to a typefind
* Other pads are handled via `handle_new_pad()`

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
80770fe0ec urisourcebin: Use iterator function where applicable
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
41617834d2 urisourcebin: Document and rename fields
Removes ambiguity when reading the code

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
c8b9a7d640 urisourcebin: Remove unused lock/list
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
638633dea3 urisourcebin: Check for live source when generating element
Instead of at a later stage

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
e8f9e17744 urisourcebin: Streamline demuxer removal
And since remove_source also removes the dmeuxer, we no longer need to call it
in addition

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
577febc29e urisourcebin: Clarify function name and arguments
* The "need_queue" variable is only used in one place, move it there
* Clarify the fact the function also exposes raw_pads

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Edward Hervey
586ec1a672 urisourcebin: Error out if a source doesn't expose pads
Looks like this fell through the cracks. If a source element doesn't have
dynamic pads and doesn't provide any source pad ... we should properly error
out.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2784>
2022-11-16 14:01:46 +00:00
Víctor Manuel Jáquez Leal
f74fb5142d pbutils: Fix vp9 mime mapping when caps when no chroma-site.
It's possible to have 4:2:0 chroma format without chroma-site in caps, but it
isn't validated by the current code. This patch fixes it.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3405>
2022-11-16 01:29:50 +00:00
Sebastian Dröge
416dae67b2 videodecoder: Consider having output data when the subclass drops a frame
The subclass might drop a frame for QoS reasons (e.g. vpxdec) and if all
frames are dropped because of that it wouldn't make sense to post an
error message on EOS.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3408>
2022-11-15 21:18:50 +00:00
Edward Hervey
5c1cb960b3 oggdemux: Don't leak incoming EOS event
If we're going to drop it ... then do drop it :)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3400>
2022-11-14 16:51:40 +00:00
Edward Hervey
7988144048 pbutils/encoding-profile: Streamline cleanup
Cleanup all local variables in one place, and ensure failure cases go through there.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3390>
2022-11-13 06:59:11 +01:00
Edward Hervey
eebb794a4f streamsynchronizer: Don't leak the syncstream object
It was leaked when breaking out early when handling GST_EVENT_STREAM_START

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3390>
2022-11-12 12:24:21 +01:00
Edward Hervey
c00da50c61 encodebasebin: Don't leak muxer pad
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3390>
2022-11-12 10:33:51 +01:00
Edward Hervey
872b0a65cb pbutils/encoding-profile: Don't leak string array
It was never freed

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3390>
2022-11-12 10:33:51 +01:00
Nicolas Dufresne
b57135e09c rawvideoparse: Fix support for sub-sampled tile
This element was missed as it does not use the new helpers to calculate the
plane size. The code is relatively simple though, so adding support for
subsample tiles was easy enough.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3385>
2022-11-11 11:02:15 +00:00
Nicolas Dufresne
aaa01ac30a gstgl: Fix handling of padded tile formats
When a tile format is padded and imported as DMABuf, the stride
contains the information about the actual width and height in
number of tiles. This information is needed by the detiling shader
in order accuratly calculate the location of pixels. To fix that,
we also copy the offset and strides into the otuput format and
the converter will ensure that the shader is recompiled whenever
the stride changes.

This fixes video corruptions observed when decoding on MT8195
with videos that aren't not aligned to 64bytes in width.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3365>
2022-11-09 17:15:32 +00:00
Talha Khan
6c8b7204e5 videoconvert, videoscaleconvert: fix element description
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3362>
2022-11-08 16:51:58 +00:00
Tim-Philipp Müller
db450689db Back to development
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3358>
2022-11-08 02:08:08 +00:00
Tim-Philipp Müller
3e29ac35c4 Release 1.21.2 2022-11-07 23:54:03 +00:00
Tim-Philipp Müller
98d2f958a9 Update ChangeLogs for 1.21.2 2022-11-07 23:53:57 +00:00
Sebastian Dröge
40800fa117 discoverer: Annotate DiscovererInfo::get_audio_streams() and others with the concrete stream info type
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3353>
2022-11-07 19:04:49 +00:00
Edward Hervey
24a0e5bdfd subparse: Fix non-closed tag handling.
Unclear what the goal was, but we could end up reading way past the next_tag.

Instead just move everything from after the end tag ('>') to the next_tag.

Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=53040

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3340>
2022-11-05 16:19:53 +00:00
Edward Hervey
93d8b3f660 parsebin: Fix leak
Release the reference on the collection which was given to us when extracting it
from the event/message.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3319>
2022-11-04 17:59:21 +00:00
Sanchayan Maity
673d13f176 playbin3: Fix missing pad unref
GST_TRACERS="leaks" GST_DEBUG="GST_TRACER:7,leaks:6" gst-play-1.0 --use-playbin3 test.mkv

When running a pipeline like above, leaks are observed.

0:00:56.882419132 240637 0x5562c528ccc0 TRACE             GST_TRACER :0:: object-alive, type-name=(string)GstConcatPad, address=(gpointer)0x7efd7c0d20a0, description=(string)<'':sink_0>, ref-count=(uint)1, trace=(string);
0:00:56.882429131 240637 0x5562c528ccc0 TRACE             GST_TRACER :0:: object-alive, type-name=(string)GstConcatPad, address=(gpointer)0x7efd7c0d2be0, description=(string)<'':sink_0>, ref-count=(uint)1, trace=(string);
0:00:56.882437056 240637 0x5562c528ccc0 TRACE             GST_TRACER :0:: object-alive, type-name=(string)GstConcatPad, address=(gpointer)0x7efd7c0d3720, description=(string)<'':sink_0>, ref-count=(uint)1, trace=(string);

gst_element_release_request_pad does not unref the pad. It needs to
be followed by gst_object_unref. Doing that fixes the above leaks.

Use g_ptr_array_new_with_free_func with gst_object_unref as the free
function to unref the pad after release.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3177>
2022-10-28 10:15:42 +05:30
Matthew Waters
1c835695a3 pbutils: add correct mime mapping for vp9
Based on https://www.webmproject.org/vp9/mp4/#codecs-parameter-string

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3260>
2022-10-28 00:06:07 +00:00
Sebastian Dröge
c878d0f68b core/base: Only post latency messages if the latency values have actually changed
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1525

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3282>
2022-10-27 15:25:22 +00:00
Edward Hervey
8f286fc388 videodecoder: Only post latency message if it changed
Posting latency messages causes a full and potentially expensive latency
recalculation of the pipeline. While subclasses should check whether the latency
really changed or not before calling this function, we ensure that we do not
post such messages if it didn't change.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3282>
2022-10-27 15:25:22 +00:00
Daniels Umanovskis
990d124790 ximagesink, xvimagesink: set the _NET_WM_PID atom on the window
This makes it easier for X11 window management to work with windows created by these sinks

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3267>
2022-10-26 16:10:36 +00:00
Sebastian Dröge
366893e9ac Fix various warnings from gobject-introspection
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3261>
2022-10-25 09:45:25 +03:00
Nirbheek Chauhan
a083280a58 gl/vulkan: Fix static linking on macOS
duplicate symbol '__invoke_on_main' in:
    /Library/Frameworks/GStreamer.framework/Versions/1.0/lib/libgstvulkan-1.0.a(cocoa_gstvkwindow_cocoa.m.o)
    /Library/Frameworks/GStreamer.framework/Versions/1.0/lib/libgstgl-1.0.a(cocoa_gstglwindow_cocoa.m.o)
ld: 1 duplicate symbol for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)

Also make the same change in iOS for consistency.

Continuation of https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/issues/1132

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3242>
2022-10-24 00:48:08 +00:00
Matthew Waters
5ddb347a23 build/gl: fix automatic dispmanx detection for rpi4
rpi4 doesn't contain dispmanx but still contains bcm_host.pc which
confuses the configure detection.  Add an explicit check for
EGL_DISPMANX_WINDOW_T to ensure that we only build with dispmanx when
the types are available.

Fixes: https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/issues/893
Fixes: https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/issues/952
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3230>
2022-10-20 22:29:16 +00:00
Matthew Waters
5fed85c465 docs/glcontextconfig: rename title to not be GstGLContext
Can be confusing havint two pages that both have GstGLContext as the
title.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3227>
2022-10-19 13:01:06 +00:00
Jordan Petridis
75872c802b cdparanoia: Ignore compiler warning coming from the cdparanoia header
When trying to build the plugin, GCC starts complaining about issues
with one of the cdparanoia headers and it block us from being able
to build the plugin with Werror.

The current warning in the header look like this:

```
[1/2] Compiling C object subprojects/gst-plugins-base/ext/cdparanoia/libgstcdparanoia.so.p/gstcdparanoiasrc.c.o
In file included from ../subprojects/gst-plugins-base/ext/cdparanoia/gstcdparanoiasrc.h:37,
                 from ../subprojects/gst-plugins-base/ext/cdparanoia/gstcdparanoiasrc.c:31:
/usr/include/cdda/cdda_interface.h:164:3: warning: initialization discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
  164 |   "Success",
      |   ^~~~~~~~~
...
/usr/include/cdda/cdda_interface.h:163:14: warning: ‘strerror_tr’ defined but not used [-Wunused-variable]
  163 | static char *strerror_tr[]={
      |              ^~~~~~~~~~~
[2/2] Linking target subprojects/gst-plugins-base/ext/cdparanoia/libgstcdparanoia.so
```

Last release of cdparanoia was in 2008, so our best bet for the
time is to ignore the warnings.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2722>
2022-10-19 08:18:45 +00:00
Sebastian Dröge
2650bba844 sdp: Add/fix various annotations
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3194>
2022-10-18 13:51:17 +03:00
Sebastian Dröge
4617b63b5f tag: Add/fix various annotations
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3194>
2022-10-18 13:51:17 +03:00
Sebastian Dröge
2b91f7e165 allocators: Add/fix various annotations
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3194>
2022-10-18 13:51:17 +03:00
Sebastian Dröge
39591cb13d gl: Add/fix various annotations
And fix a memory leaks in gst_gl_display_egl_new() error cases.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3194>
2022-10-18 08:56:58 +00:00
Sebastian Dröge
533ea9bd7c pbutils: Add/fix various annotations
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3194>
2022-10-18 08:56:58 +00:00
Sebastian Dröge
47e4110a1b rtp: Add/fix various annotations
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3194>
2022-10-18 08:56:58 +00:00
Sebastian Dröge
84ab8c9e12 rtsp: Add/fix various annotations
Also initialize out parameters so that they don't have an undefined
value in case of errors.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3194>
2022-10-18 08:56:58 +00:00
Sebastian Dröge
75731aec53 app: Add/fix various annotations
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3194>
2022-10-18 08:56:58 +00:00
Sebastian Dröge
e0b06df223 audio: Add/fix various annotations
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3194>
2022-10-18 08:56:58 +00:00
Sebastian Dröge
2e5c73fff7 video: Add/fix various annotations
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3194>
2022-10-18 08:56:58 +00:00
Edward Hervey
0c47735c4a urisourcebin: Fix usage of raw and non-raw source provider
The computation in analyze_source was wrong, and would state that the element
has "all raw source pads" if it had at least one.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1029

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3199>
2022-10-18 07:46:06 +00:00
Sebastian Dröge
4df3da3bab rtpbuffer: Initialize extended timestamp to the first wraparound period
This allows correct handling of wrapping around backwards during the
first wraparound period and avoids the infamous "Cannot unwrap, any
wrapping took place yet" error message.

It allows makes sure that for actual timestamp jumps a valid value is
returned instead of 0, which then allows the caller to handle it
properly. Not having this can have the caller see the same timestamp (0)
for a very long time, which for example can cause rtpjitterbuffer to
output the same timestamp for a very long time.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1500

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3202>
2022-10-18 06:09:08 +00:00
Edward Hervey
ece84d69a2 gst-play: Don't leak the stream collection
We are given a reference to the collection when parsing it from the
message. Just store it (instead of referencing it again).

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3186>
2022-10-15 03:04:06 +00:00
Julian Bouzas
9197235539 riff: Mark jpeg as parsed
This is needed so that autoplugging works with avidemux and JPEG decoders that
need parsed sink caps (eg rockchip 'mppjpegdec' decoder). It also works fine
with 'jpegdec' decoder regardless.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3175>
2022-10-13 13:53:29 -04:00
Thibault Saunier
e99393520e videorate: Do not close segment when getting a same segment twice
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3059>
2022-10-11 11:48:09 -03:00
Thibault Saunier
11b83fb2fc videorate: Handle closing segment on EOS right after caps event
The scenario is what we try in the tests:
- we have a segment with .stop set
- some frame(s) flow
- we get a CAPS event
- we get an EOS (before getting buffers after the CAPS event)

in that case, without that patch, the segment is not properly closed
which is not correct. In this patch we keep track of previous caps until
a new buffer arrives, this way in that situation we set previous caps
again, and close the segment with the previous buffer.

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1352
in this specific case

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3059>
2022-10-11 11:48:09 -03:00
Nicolas Dufresne
82f63b0d64 opengl: Fix usage of eglCreate/DestroyImage
The implementation was inconsistent between create and destroy. EGLImage
creation and destruction is requires for EGL 1.5 and up, while
otherwise the KHR version is only available if EGL_KHR_image_base
feature is set. Not doing these check may lead to getting a function
pointer to a stub, which is notably the case when using apitrace.

Fixes #1389

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2925>
2022-10-11 08:23:45 +00:00
Aleksandr Slobodeniuk
89fc20931b decodebin3: allow to call "dispose" multiple times
https://docs.gtk.org/gobject/concepts.html#reference-counts-and-cycles

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3135>
2022-10-10 10:24:52 +00:00
Aleksandr Slobodeniuk
67caa45a4c decodebin3: fix mutex leaks
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3126>
2022-10-06 14:25:27 +00:00
Thibault Saunier
31acfcd875 decodebin3: Do not try to plug a decoder on raw formats
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3123>
2022-10-06 08:41:49 +00:00
Seungha Yang
c9f12b5086 videosink: Don't return unknown end-time from get_times()
... in case of reverse playback. Otherwise basesink will not
wait for clock

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3121>
2022-10-06 06:36:42 +00:00
Haihao Xiang
8f5399b156 eglimage: fix Y412_LE DMABuf import support
This fixed the error below:

GST_GL_PLATFORM=egl gst-launch-1.0 videotestsrc ! msdkvpp !
"video/x-raw(memory:DMABuf),format=Y412_LE" ! glimagesink

0:00:00.063737691 576978 0x557c11266920 ERROR             gleglimage
gsteglimage.c:577:_drm_rgba_fourcc_from_info: Unsupported format for
DMABuf.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1389>
2022-10-05 04:21:03 +00:00
Haihao Xiang
fbbf44c48c eglimage: add Y410 DMABuf import support
This fixed the error below:

GST_GL_PLATFORM=egl gst-launch-1.0 videotestsrc ! msdkvpp ! \
"video/x-raw(memory:DMABuf),format=Y410" ! glimagesink

0:00:00.040553883 576732 0x55be9b35f920 ERROR             gleglimage
gsteglimage.c:577:_drm_rgba_fourcc_from_info: Unsupported format for
DMABuf.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1389>
2022-10-05 04:21:03 +00:00
Haihao Xiang
2d1496bc70 eglimage: add Y212_LE / Y212_BE DMABuf import support
This fixed the error below:

GST_GL_PLATFORM=egl gst-launch-1.0 videotestsrc ! msdkvpp \
! "video/x-raw(memory:DMABuf),format=Y212_LE" ! glimagesink

0:00:00.148086281 575148 0x562a6d36d920 ERROR             gleglimage
gsteglimage.c:555:_drm_rgba_fourcc_from_info: Unsupported format for
DMABuf.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1389>
2022-10-05 04:21:03 +00:00
Haihao Xiang
18215dcd3b eglimage: add Y210 DMABuf import support
This fixed the error below:

GST_GL_PLATFORM=egl gst-launch-1.0 videotestsrc ! msdkvpp ! \
"video/x-raw(memory:DMABuf),format=Y210" ! glimagesink

0:00:00.039881627 571365 0x56245eba6920 ERROR             gleglimage
gsteglimage.c:549:_drm_rgba_fourcc_from_info: Unsupported format for
DMABuf

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1389>
2022-10-05 04:21:03 +00:00
Tim-Philipp Müller
99bbb1ef35 Back to development
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3115>
2022-10-04 03:57:31 +01:00
Tim-Philipp Müller
9820e58be6 Release 1.21.1 2022-10-04 01:18:20 +01:00
Tim-Philipp Müller
c376d80e9b Update ChangeLogs for 1.21.1 2022-10-04 01:13:59 +01:00
Jan Schmidt
e36440e7bb playsink: Hold a reference to the soft volume element
Always hold a reference to the soft volume element
provided by the playsinkaudioconvert bin helper, the
same as when volume is provided by a sink element,
or the soft volume element gets unreffed too soon.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3108>
2022-10-03 18:56:41 +00:00
Jan Schmidt
eef76a9491 xvimagesink: Don't leak XvShmImage
If allocating an XvShmImage generates an X error, but
still returns some allocated memory, make sure to free it
so it doesn't leak.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3100>
2022-10-03 17:30:51 +00:00
Jan Schmidt
6b7d4f74f2 xvimagesink: Zero initialize mask array
Clear the stack array before setting bits to pass to
XISelectEvents(). Fixes spurious crash from an X error:

X Error of failed request:  BadValue (integer parameter out of range for operation)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3100>
2022-10-03 17:30:51 +00:00
Jan Schmidt
c8cf714d37 xvimagesink: Don't leak temporary
Use a stack variable instead of a temporarily
malloced variable that wasn't being freed
properly. Fixes a small leak of a GstXvTouchDevice

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3100>
2022-10-03 17:30:51 +00:00
Jan Schmidt
aae7b5416c decodebin3: Make sure event is writable before modifying
Make sure we're operating on a private copy of an event when
modifying it.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3107>
2022-10-03 16:40:49 +00:00
Jan Schmidt
bf6d30ed79 urisourcebin: Make sure event is writable before modifying.
Make sure we're operating on a private copy of an event before
modifying it.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3107>
2022-10-03 16:40:49 +00:00
Jan Schmidt
e5828c8295 decodebin3: Don't lose a ref on EOS event
Make sure not to give away the ref on the final EOS
event for which the probe handler is returning GST_PAD_PROBE_REMOVE
when pushing the event manually.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3107>
2022-10-03 16:40:49 +00:00
Tim-Philipp Müller
4c8a621809 pbutils: descriptions: add meta/x-klv
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3094>
2022-09-30 11:08:45 +03:00
Tim-Philipp Müller
2d53f9f97c pbutils: descriptions: fix gst_pb_utils_get_caps_description_flags()
And add a little unit test.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3094>
2022-09-30 11:08:45 +03:00
James Cowgill
4edfc86c2a xmptag: Call gst_tag_register_musicbrainz_tags during init
We need to call this to register the MusixBrainz tags before we use
them in an XMP schema.

Fixes this critical when attempting to run jpegparse on a JPEG
containing MusicBrainz XMP tags:

  GStreamer-CRITICAL **: 20:41:07.885: gst_tag_get_type: assertion 'info != NULL' failed

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3092>
2022-09-29 23:29:20 +00:00
Sebastian Dröge
d2c13f0c26 test-effect-switch: Fix some memory leaks and make effect element ownership clearer
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3091>
2022-09-29 22:34:37 +00:00
Philipp Zabel
3b900e1fa4 buffer: drop parent meta in deep copy/foreach_metadata
The purpose of a deep buffer copy is to be able to release the source
buffer and all its dependencies. Attaching the parent buffer meta to
the newly created deep copy needlessly keeps holding a reference to the
parent buffer.

The issue this solves is the fact you need to allocate more
buffers, as you have free buffers being held for no reason. In the good
cases it will use more memory, in the bad case it will stall your
pipeline (since codecs often need a minimum number of buffers to
actually work).

Fixes #283

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2928>
2022-09-28 12:34:44 -06:00
Edward Hervey
c22ddbc187 decodebin3: Fix memory issues with active selection list
This had a couple of issues:
* The backing strings (from GstStream) could disappear
* The actual list wasn't properly reset/freed when decodebin3 was re-used

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3083>
2022-09-27 16:21:25 +02:00
Nirbheek Chauhan
a0e6278dba meson: Use implicit builtin dirs in pkgconfig generation
Starting with Meson 0.62, meson automatically populates the variables
list in the pkgconfig file if you reference builtin directories in the
pkgconfig file (whether via a custom pkgconfig variable or elsewhere).
We need this, because ${prefix}/libexec is a hard-coded value which is
incorrect on, for example, Debian.

Bump requirement to 0.62, and remove version compares that retained
support for older Meson versions.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1245

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3061>
2022-09-21 21:08:11 +05:30
Thibault Saunier
bb840bd116 videorate: Add a max-closing-segment-duplication-duration property
This allows users to let videorate fully fill the segments when received
EOS or on new segment, removing an arbitrary limit of 25 duplicates which
might not be what the user wants (for example on low FPS stream in GES,
that sometimes leaded to broken behavior)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3000>
2022-09-20 13:23:02 +00:00
Xavier Claessens
5f0493d33a meson: Set install_tag on some targets
Trying to follow recommendation from Meson documentation:
https://mesonbuild.com/Installing.html#installation-tags

Move tools into 'bin' or 'bin-devel' categories to keep only libs and
plugins in the default 'runtime' category. This simplifies distribution
of GStreamer application skipping parts that are not needed, similarly
to what Cerbero does by hardcoding huge list of files.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3017>
2022-09-20 10:08:15 +00:00
Edward Hervey
8c49fcbc83 video-converter: Fix doc
Argument names weren't correct

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3043>
2022-09-19 08:54:48 +02:00
Thibault Saunier
e866c1d967 decodebin2: Do not fail if one of the decoders isn't able to output the requested format
when expose-all=False

When trying to find an decoder in that case, we loop over the different
decoder factories, and check that it outputs a format that matches the
requested one (through the :caps property), but if we find a decoder
that do match but later on some other don't we end up failing
autopluging. This patch ensures that we still plug the decoder that can
work.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3011>
2022-09-15 21:03:14 +00:00
Thibault Saunier
a75f74d2cd gl:meson: Minor typo fix
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2954>
2022-09-15 20:11:46 +00:00
Thibault Saunier
ebcaf35839 doc: Do not build plugins to build the doc
It is not actually necessary

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2954>
2022-09-15 20:11:46 +00:00
Thibault Saunier
1c4950718f discoverer: Fix discovering source that expose raw audio/video
Exposes a "uridecodebin:post-stream-topology" property as the discoverer
needs to have topology information about all streams so we need
`uridecodebin` to always plug decodebins for that case.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3009>
2022-09-15 19:25:01 +00:00
Thibault Saunier
71eda6e2e6 uridecodebin: Fix some property documentation syntax
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3009>
2022-09-15 19:25:01 +00:00
Thibault Saunier
1c6adcab89 uridecodebin: Ensure that pads caps are set before exposing them
We are supposed to guarantee that pads that are exposed have the caps
set, but for sources that have pad with "all raw caps" templates, we end
up exposing pads that don't have caps set yet, which can break code (in
GES for example).

To avoid that we let uridecodebin plug a `decodebin` after such pads and
let decodebin to handle that for us. In the end the only thing that
decodebin does in those cases is to wait for pads to be ready and expose
them, after that `uridecodebin` will expose those pads.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3009>
2022-09-15 19:25:01 +00:00
Zebediah Figura
c4681ac428 meson: Build with -Wl,-z,nodelete to prevent unloading of dynamic libraries and plugins
GLib made the unfortunate decision to prevent libgobject from ever being
unloaded, which means that now any library which registers a static type
can't ever be unloaded either (and any library that depends on those,
ad nauseam).

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/778>
2022-09-13 15:48:52 +00:00
Seungha Yang
11e4eb5490 video-format: Workaround MSVC build error
../gst-libs/gst/video/video-format.c(6779): error C2219: syntax error:
type qualifier must be after '*'

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2719>
2022-09-08 21:01:37 +00:00
Matthew Waters
1e269a3c6d subparse: fix crash when parsing invalid timestamps in mpl2
Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=49245

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2989>
2022-09-07 07:20:53 +00:00
Thibault Saunier
6a4425e46a meson: Call pkgconfig.generate in the loop where we declare plugins dependencies
Removing some copy pasted code

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2970>
2022-09-01 21:17:35 +00:00
Thibault Saunier
bc9c1e3956 meson: Namespace the plugins_doc_dep/libraries variables
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2970>
2022-09-01 21:17:35 +00:00
Thibault Saunier
b5e90fe579 meson: Rename plugins list and make them "dependency" objects
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2970>
2022-09-01 21:17:35 +00:00
Ádám Balázs
55716ac21c gstaudioconvert: doc: Fix mix-matrix example
mix-matrix should contain float elements, modify the example to do so

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2966>
2022-08-31 17:24:51 +00:00
8648f5f7d2 audiovisualizer: fix buffer mapping to not increase refcount
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2953>
2022-08-30 15:22:42 +00:00
Sebastian Dröge
65b15f72b5 x(v)imagesink: Don't create invalid GstNavigationModifierType by simply passing through X11 event states
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2931>
2022-08-25 14:57:22 +00:00
Mathieu Duponchelle
8756f523d1 playback: add onvif metadata caps to raw caps
+ remove encoding from x-onvif-metadata caps output by qtdemux

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2889>
2022-08-24 12:21:18 +03:00
Mathieu Duponchelle
31c1e586c3 videoconvert: fix passthrough on equivalent transfer
When the input info and output info are equal, except for the
transfer functions that are *not* equivalent, we need to set up
a converter as we won't be passthrough.

Fixes an assertion in that case.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2929>
2022-08-23 16:02:31 +02:00
Guillaume Desmottes
cb1dc5c9ac base: video-converter: add accessors for input and output formats
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2905>
2022-08-17 12:33:54 +00:00
Seungha Yang
dbc8a7ab18 videoconvert,videoscale: Do conversion in videoconvert and scaling in videoscale
Keep behaving the same as before videoconvertscale port

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2778>
2022-08-16 12:08:36 +00:00
Seungha Yang
0d5c937642 Revert "videoconvertscale: Add properties to disable scaling/converting in videoconvert/videoscale"
This reverts commit cd7a91cef1.

Reverting properties, scaling in videoconvert and converting in
videoscale will be disabled by the other commit

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2778>
2022-08-16 12:08:36 +00:00
Khem Raj
ce1f1c9eff ssaparse: include required system headers for isspace() and sscanf() functions
Newer compilers ( clang 15 ) have turned stricter and errors out instead
of warning on implicit function declations

Fixes
gstssaparse.c:297:12: error: call to undeclared library function 'isspace' with type 'int (int)'; ISO C99 and later do not support implicit function declarations [-Wimplicit-function-declaration]
    while (isspace(*t))

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2879>
2022-08-14 08:32:05 +00:00
Sebastian Dröge
edb0e47074 rtspurl: Use gst_uri_join_strings() in gst_rtsp_url_get_request_uri_with_control() instead of a hand-crafted, wrong version
For example the query string of the base must not be taken over to the
request URL unless there is no control path, and control paths can be
absolute and must not be considered relative if they start with a /.

Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/issues/971

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2868>
2022-08-12 18:52:29 +00:00
Sebastian Dröge
d69616b6ba rtspurl: Use fail_unless_equals_string() in tests
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2868>
2022-08-12 18:52:29 +00:00
Jan Schmidt
c668f6fc22 basetextoverlay: Don't miscalculate text running times
When a new segment event arrives, it immediately updates
the current stored segment, which was used for calculating
the running time of the current text buffer for every
passing video frame. This means a segment that arrives
after the text buffer might get used to (mis)calculate
the running times subsequently.

Instead, calculate and store the right running time
using the current segment when storing the buffer. Later
the stored segment can get freely updated.

This fixes the case where pieces of video and text streams
are seamlessly concatenated and fed through the text overlay.
Previously, it could lead to the current text buffer suddenly
have a massive running time and blocking all further input.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2802>
2022-08-12 12:08:18 +00:00
Tim-Philipp Müller
a13fd0ead5 opusenc: improve inband-fec property documentation
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2853>
2022-08-09 23:34:59 +00:00
Jordan Petridis
bc3e07dc21 gstalsaplugin: return the result of the element registration
Previously there were branches that would return FALSE, however
it looks like we forgot to return the new result variable.

https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/900

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2695>
2022-08-03 20:35:59 +00:00
Mathieu Duponchelle
efb18ec300 smartencoder: fix detection of avc1
While avc1 is the FourCC, avc is the name used in caps

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1549>
2022-08-02 15:48:12 +00:00
Mathieu Duponchelle
6bcfce7501 decodebin2: don't reverse stream topology order
This can be important for instance when a container holds multiple
tracks with the same media type, with no indication (eg tags) of
which track is the default one.

In that case, players usually pick the first track by default.

This is especially useful when using smart editing with GES, as
it will result in the same ordering as the input file that was
used as a template.

For reference, this yields the same order as ffprobe.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1549>
2022-08-02 15:48:12 +00:00
Mathieu Duponchelle
b2c4052531 gstsmartencoder: don't make calculations for invalid DTS
Instead, as the current code relies on having a valid DTS (for lining
up passed through and re-encoded segments), simply compute a DTS
from the PTS if the DTS was invalid.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1549>
2022-08-02 15:48:12 +00:00
Mathieu Duponchelle
62c303c2e0 encoding-profile: don't order profiles by stream ID ..
when creating a profile from a discoverer info.

There is no justification for the existing code, and talking with
Thibault he cannot remember why the sort was in place.

On the other hand, this allows GES users to not have to implement
a callback for the select-tracks-for-object callback when using
it to trim a single clip, which the output profile was built from:
track elements will be placed in the appropriate track by default,
that is the one that will be connected to the matching profile.

For multi-clip timelines, the situation doesn't change, users will
still have to implement a callback and do the leg work of placing
track elements (if any) in a matching track (if any).

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1549>
2022-08-02 15:48:12 +00:00
Mathieu Duponchelle
0f85a46148 encoding-profile: ignore more output caps fields
chroma-format, bit-depth-chroma, bit-depth-luma are all informative
fields set by the H265 and H265 parser upon receiving an SPS.

They shouldn't be constrained downstream of the parser, instead
if a user wants those to ultimately match certain values they
should do so by constraining a profile.

In this case however, we also always remove the profile constraint
in order to let encoders pick a suitable one as a function of the
raw input video format and their own capabilities.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1549>
2022-08-02 15:48:12 +00:00
Edward Hervey
f7e75a0208 parsebin: Avoid crash with unknown streams
With the new addition of handling unknown sream types we *could* end up with a
chain which doesn't have a current_pad (it's an intermediary one)

Fixes #1287

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2822>
2022-08-01 22:52:42 +00:00
Nirbheek Chauhan
5da9f62313 rtsp+rtmp: Forward warning added to tls-validation-flags to our users
With the 2.72 release, glib-networking developers have decided that
TLS certificate validation cannot be implemented correctly by them, so
they've deprecated it.

In a nutshell: a cert can have several validation errors, but there
are no guarantees that the TLS backend will return all those errors,
and things are made even more complicated by the fact that the list of
errors might refer to certs that are added for backwards-compat and
won't actually be used by the TLS library.

Our best option is to ignore the deprecation and pass the warning onto
users so they can make an appropriate security decision regarding
this.

We can't deprecate the tls-validation-flags property because it is
very useful when connecting to RTSP cameras that will never get
updates to fix certificate errors.

Relevant upstream merge requests / issues:

https://gitlab.gnome.org/GNOME/glib/-/merge_requests/2214

https://gitlab.gnome.org/GNOME/glib-networking/-/issues/179

https://gitlab.gnome.org/GNOME/glib-networking/-/merge_requests/193

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2494>
2022-07-30 11:27:12 +00:00
Seungha Yang
ea47a82e9e compositor: Update plugins cache
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1486>
2022-07-29 13:29:39 +00:00
Seungha Yang
648739012a compositor: Warn when inputs are SDR/HDR mixed
Let user know that the result of mixed SDR/HDR is not guaranteed
to be a good visual quality.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1486>
2022-07-29 13:29:39 +00:00
Seungha Yang
56d47f641f compositor: Add support for all formats
For formats which we don't have fast-path implementation, compositor
will convert it to common unpack formats (AYUV, ARGB, AYUV64 and ARGB64)
then blending will happen using the intermediate formats.
Finally blended image will be converted back to the selected output format
if required.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1486>
2022-07-29 13:29:39 +00:00
Seungha Yang
22a4543c5f compositor: Add support for Y444 high bitdepth formats
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1486>
2022-07-29 13:29:39 +00:00
Seungha Yang
3cab0a9c08 compositor: Add support for I420/I422 high bitdepth formats
Implementation for {I420,I422}_{10,12}_{LE,BE} formats

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1486>
2022-07-29 13:29:39 +00:00
Seungha Yang
64eb4b8d62 compositor: Calculate background color only once
... instead of do that per fill_color() call in case of RGB format.
Moreover, respect selected GstVideoColorRange

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1486>
2022-07-29 13:29:39 +00:00
Matthew Waters
598f2ab73f rtspconnection: protect cancellable by a mutex
It is entirely possible for the cancellable to be cancelled (and freed)
in gst_rtsp_connection_flush() while there may be an ongoing read/write
operation.

Nothing prevents gst_rtsp_connection_flush() from waiting for the
outstanding read/writes.

This could lead to a crash like (where cancellable has been freed
within gst_rtsp_connection_flush()):

 #0  0x00007ffff4351096 in g_output_stream_writev (stream=stream@entry=0x7fff30002950, vectors=vectors@entry=0x7ffe2c6afa80, n_vectors=n_vectors@entry=3, bytes_written=bytes_written@entry=0x7ffe2c6af950,  cancellable=cancellable@entry=0x7fff300288a0, error=error@entry=0x7ffe2c6af958) at ../subprojects/glib/gio/goutputstream.c:377
 #1  0x00007ffff44b2c38 in writev_bytes (stream=0x7fff30002950, vectors=vectors@entry=0x7ffe2c6afa80, n_vectors=n_vectors@entry=3, bytes_written=bytes_written@entry=0x7ffe2c6afb90, block=block@entry=1, cancellable=0x7fff300288a0) at ../subprojects/gst-plugins-base/gst-libs/gst/rtsp/gstrtspconnection.c:1320
 #2  0x00007ffff44b583e in gst_rtsp_connection_send_messages_usec (conn=0x7fff30001370, messages=messages@entry=0x7ffe2c6afcc0, n_messages=n_messages@entry=1, timeout=timeout@entry=3000000) at ../subprojects/gst-plugins-base/gst-libs/gst/rtsp/gstrtspconnection.c:2056
 #3  0x00007ffff44d2669 in gst_rtsp_client_sink_connection_send_messages (sink=0x7fffac0192c0, timeout=3000000, n_messages=1, messages=0x7ffe2c6afcc0, conninfo=0x7fffac019610) at ../subprojects/gst-rtsp-server/gst/rtsp-sink/gstrtspclientsink.c:1929
 #4  gst_rtsp_client_sink_try_send (sink=sink@entry=0x7fffac0192c0, conninfo=conninfo@entry=0x7fffac019610, requests=requests@entry=0x7ffe2c6afcc0, n_requests=n_requests@entry=1, response=response@entry=0x0, code=code@entry=0x0) at ../subprojects/gst-rtsp-server/gst/rtsp-sink/gstrtspclientsink.c:2845
 #5  0x00007ffff44d3077 in do_send_data (buffer=0x7fff38075c60, channel=<optimized out>, context=0x7fffac042640) at ../subprojects/gst-rtsp-server/gst/rtsp-sink/gstrtspclientsink.c:3896
 #6  0x00007ffff4281cc6 in gst_rtsp_stream_transport_send_rtp (trans=trans@entry=0x7fff20061f80, buffer=<optimized out>) at ../subprojects/gst-rtsp-server/gst/rtsp-server/rtsp-stream-transport.c:632
 #7  0x00007ffff4278e9b in push_data (stream=0x7fff40019bf0, is_rtp=<optimized out>, buffer_list=0x0, buffer=<optimized out>, trans=0x7fff20061f80) at ../subprojects/gst-rtsp-server/gst/rtsp-server/rtsp-stream.c:2586
 #8  check_transport_backlog (stream=0x7fff40019bf0, trans=0x7fff20061f80) at ../subprojects/gst-rtsp-server/gst/rtsp-server/rtsp-stream.c:2645
 #9  0x00007ffff42793b3 in send_tcp_message (idx=<optimized out>, stream=0x7fff40019bf0) at ../subprojects/gst-rtsp-server/gst/rtsp-server/rtsp-stream.c:2741
 #10 send_func (stream=0x7fff40019bf0) at ../subprojects/gst-rtsp-server/gst/rtsp-server/rtsp-stream.c:2776
 #11 0x00007ffff7d59fad in g_thread_proxy (data=0x7fffbc062920) at ../subprojects/glib/glib/gthread.c:827
 #12 0x00007ffff7a8ce2d in start_thread () from /lib64/libc.so.6
 #13 0x00007ffff7b12620 in clone3 () from /lib64/libc.so.6

Fix by adding a cancellable lock and returning an extra reference used
across all read/write operations.  gst_rtsp_connection_flush() can free
the in-use cancellable and it will no longer affect any in progress
read/write.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2799>
2022-07-28 10:32:15 +00:00
Tim-Philipp Müller
ccb5d52be5 audiointerleave: fix property docs
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2785>
2022-07-23 16:03:43 +00:00
Jan Schmidt
202c3bc4b1 video: Fix scaling in 4x horizontal co-sited chroma
4x downscaling of chroma with co-sited chroma has never worked
it seems.

Fixes incorrect videotestsrc output and videoconvert conversions
to Y41B, YUV9, YVU9 and IYU9 with co-sited chroma.

e.g.
gst-launch-1.0 videotestsrc ! video/x-raw,format=Y41B,width=1280,height=720 ! \
  videoconvert ! autovideosink

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2789>
2022-07-23 09:28:32 +00:00
Seungha Yang
0cadd10474 videoaggregator: Don't force upstream alpha format
"video/x-raw,format=RGBA ! some-video-filter ! video/x-raw,format=NV12"
is a very common case and therefore such erroring at baseclass
does not seem to be a desired behavior.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2703>
2022-07-21 21:34:06 +00:00
Seungha Yang
953257782d video-converter: Use primaries compare function
Avoid conversion if both color primaries are functionally equal

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2765>
2022-07-18 08:56:45 +00:00
Seungha Yang
2ed64cad6a video-color: Add primaries and colorimetry compare functions
SMPTE 170M and 240M use the same RGB and white point coordinates
and therefore both primaries can be considered functionally
equivalent.
Also, some transfer functions have different name but equal
gamma functions. Adding another colorimetry compare function
to deal with thoes cases at once

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2765>
2022-07-18 08:56:45 +00:00
Matthew Waters
390518a296 glimagesink: only allow setting the GL display/context if it is a valid value
Otherwise, when setting the external application context, then the
display may be cleared and then not used and the asharing mechanism does
not work anymore.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2750>
2022-07-13 01:20:00 +00:00
Jan Schmidt
3511be9a05 glupload: Add raw caps to sink pad when needed.
When checking if the current upload method can support
the requested caps filter in _transform_caps(),
make sure the sink pad reports raw caps.

Fixes #1311

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2725>
2022-07-12 09:30:46 +00:00
Jan Schmidt
f8541b05aa gstglupload: Remove raw caps from individual methods
Raw memory upload should always be the least preferred input
caps, only added by the raw memory uploader as the last thing
in the caps.

Caps negotiation should still choose raw data when it needs to,
and other upload methods that can accept raw data buffers will still do so.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2725>
2022-07-12 09:30:46 +00:00
Mathieu Duponchelle
56ec817bf4 videoaggregator: always convert when user provides converter-config
The `converter-config` property may be used to perform cropping,
conversion should always be performed when the user set the property
to a non-NULL value.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2746>
2022-07-12 08:03:08 +00:00
Andoni Morales Alastruey
94e1ddad43 glwindow_cocoa: fix a leak of the GstNSView
This leak is also causing a leak of the GstGLCAOpenGLLayer
which leaks the GstGLWrappedContext and the GstGLDisplay

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2736>
2022-07-11 11:25:54 +00:00
Andoni Morales Alastruey
7db2a3cf11 gl: Fix leak of the whole CGL context
This was leaking the CGL context and several resources
allocated in the context, around 70MB for a 1080p clip

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2736>
2022-07-11 11:25:54 +00:00
Marc Leeman
18f2f83b4a base: lookup RGB format without alpha
librfb requests a colour space for depth 32 and bpp 32 with alpha set to
0x0, treat this the same as depth 24 with bpp 32.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2627>
2022-07-09 12:06:58 +00:00
Matthew Waters
dd4bbb6379 videoconvertscale: ensure writable caps when fixating format
gst_video_convert_scale_get_fixed_format() receives 'othercaps' from
basetransforms' fixate_caps() vmethod which explicitly mentions that
'`othercaps` may not be writable'.

The gst_caps_intersect() call just before may or may not produce new
caps. Particularly in cases like EMPTY or ANY caps on either of the
inputs, only a ref is taken and returned to the caller.

As a result, gst_video_convert_scale_fixate_format() may have attempted
to modify a non-writable caps structure.

Fix by adding a gst_caps_make_writable().

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2709>
2022-07-04 19:57:10 +00:00
Tim-Philipp Müller
f19f579712 samiparse: clean up some GString usage
There's no need to re-assign the return value of
g_string_append_*() functions and such to the variable
holding the GString. These return values are just for
convenience so function calls can be chained. The actual
GString pointer won't change, it's not a GList after all.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2685>
2022-07-01 17:24:52 +00:00
Tim-Philipp Müller
270d23c8e0 samiparse: micro-optimise entity handling
Avoid relocations and hard-code entity string length
in the struct, since we basically get it for free here.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2685>
2022-07-01 17:24:52 +00:00
Tim-Philipp Müller
84a3b0ef87 samiparse: fix handling of self-closing tags
We would check the wrong string (rest of line rather than element)
for the / suffix of self-closing tags, which is not only wrong but
also has atrocious performance with certain strings like the garbled
nonsense clusterfuzz feeds us, which might cause discoverer to time
out when processing garbled SAMI files.

Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=47461

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2685>
2022-07-01 17:24:52 +00:00
Jan Schmidt
79d8b435d7 Revert "glupload: Fix caps query with no filter"
This reverts commit 6f9ae5d758.

The _transform_caps() function can't tell the difference
between the caller wanting to know the output caps
for the current method, or all possible output caps. If
it includes caps for all possible methods, glupload can
end up negotiating and sending the wrong output caps
downstream.

Partially reverts !2687
Fixes #1310

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2699>
2022-07-02 00:05:53 +10:00
Sebastian Dröge
d090e2c343 glvideomixer: Only consider property changes a geometry change if there as an actual change
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2669>
2022-07-01 05:41:57 +03:00
Sebastian Dröge
3a252f3d87 glvideomixer: Add crop-{left,right,top,bottom} pad properties for cropping inputs
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2669>
2022-07-01 05:41:57 +03:00
Sebastian Dröge
3f71a467fc sdpmessage: Don't set SDP medias from caps without media/payload/clock-rate fields
Previously it would've silently failed reading the payload/clock-rate
and instead would've used some random value that happened to be on the
stack.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2689>
2022-06-30 09:28:27 +00:00
Jan Schmidt
6f9ae5d758 glupload: Fix caps query with no filter
If no filter caps are provided with a caps query, always
generate a full set of all caps from all upload methods,
not just the configured one. This is needed to handle
renegotiation when dealing with raw sysmem caps - as the upload
method might accept raw sysmem caps, but only the raw data
uploader adds those to the caps query.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2687>
2022-06-30 08:52:04 +00:00
Jan Schmidt
de0e4b8fd6 Revert "glupload: allow system memory for dmabuf in transform_caps"
This reverts commit f3292dc156.

Only the raw data uploader should add sysmem caps to the
actual caps query, because we want them to be at the
lowest priority. If upstream does select to send raw
caps, then the correct upload method will still
be chosen because the accept_caps implementation
will accept them

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2687>
2022-06-30 08:52:04 +00:00
Jan Schmidt
342f02015b gl: Don't use the full transform_caps() method for reconfiguration check
When checking if we need to reconfigure when uploading, check
specifically the output caps of the current method will
result in compatible/incompatible caps, not the full set
of output caps from all upload methods.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2687>
2022-06-30 08:52:04 +00:00
Sebastian Dröge
7064404b1e video: Include new video-sei.h in video.h
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2688>
2022-06-30 08:42:43 +03:00
Tim-Philipp Müller
9272943bc7 coding style: allow declarations after statement
See https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1243/
and https://gitlab.freedesktop.org/gstreamer/gstreamer-project/-/issues/78

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2683>
2022-06-29 13:40:25 +00:00
James Hilliard
4902076968 videorate: remove property-value quotes
Fixes warnings like:
Received a structure string that contains '="0.5"'. Reading as a gdouble value, rather than a string value. This is undesired behaviour, and with GStreamer 1.22  onward, this will be interpreted as a string value instead because it is wrapped in '"' quotes. If you want to guarantee this value is read as a string, before this change, use '=(string)"0.5"' instead. If you want to read in a gdouble value, leave its value unquoted.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2621>
2022-06-29 00:36:17 +00:00
Tim-Philipp Müller
c895cdbec8 tests: skip unit tests for dependency-less elements that have been disabled
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/issues/1136

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2660>
2022-06-27 07:05:00 +00:00
Xavier Claessens
18aa649f87 GstVideoFrame: Add g_auto() support
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2412>
2022-06-20 16:17:50 +00:00
Vivia Nikolaidou
b90d02741e avviddec, video.c, h265parse: Workaround for broken field-based interlaced encoders
Some encoders (e.g. Makito) have H265 field-based interlacing, but then
also specify an 1:2 pixel aspect ratio. That makes it kind-of work with
decoders that don't properly support field-based decoding, but makes us
end up with the wrong aspect ratio if we implement everything properly.
As a workaround, detect 1:2 pixel aspect ratio for field-based
interlacing, and check if making that 1:1 would make the new display
aspect ratio common. In that case, we override it with 1:1.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2577>
2022-06-16 10:03:02 +00:00
James Hilliard
f34ee92999 decodebin3: fix EOS event sequence
See docs:
https://gstreamer.freedesktop.org/documentation/additional/design/seqnums.html?gi-language=c#seqnums-sequence-numbers

Per docs:
When a sink element receives an EOS event and creates a new EOS
message to post, it should copy the seqnum from the event to the
message because the EOS message is a consequence of the EOS event
being received.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2588>
2022-06-15 07:19:30 +00:00
Tim-Philipp Müller
9d9e59622f Bump GLib requirement to >= 2.62
Can't require 2.64 yet because of
https://gitlab.freedesktop.org/gstreamer/cerbero/-/issues/323

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2568>
2022-06-10 06:01:41 +00:00
Andoni Morales Alastruey
efb8c5381c video: add new video-sei.h header to the list of video_headers
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1458>
2022-06-03 08:29:05 +00:00
Andoni Morales Alastruey
64a92b549d Fix documentation
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1458>
2022-06-03 08:29:05 +00:00
Brad Hards
804a6054bb h264parse: add unit test for Precision Time Stamp in SEI messages
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1458>
2022-06-03 08:29:05 +00:00
Brad Hards
9a2ce2683b h264parse: fix copying of data and UUID
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1458>
2022-06-03 08:29:05 +00:00
Andoni Morales Alastruey
ca2eb9f65f h264parse: add support Precision Time Stamp in SEI messages
Expose User Data Unregistered as a new Meta and add
API to parse Precision Time Stamp (ST 0604).

Fixes #927

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1458>
2022-06-03 08:29:05 +00:00
Nicolas Dufresne
f1756493d2 video: Fix NV12_16L32 size calculation
The subsampling of the second plane was not taken into account, resulting in a
16bit per pixel buffers instead of 12.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2512>
2022-05-31 16:23:01 +00:00
Seungha Yang
b91093a2e6 playbin3: Configure combiner on pad-added if needed
When collection is updated, decodebin3 exposes pad first and then
streams-selected message is posted.
The condition can cause a situation where playbin3 links non-existing
combiner/playsink pads (since streams-selected is not posted yet) with
new decodebin output pad. This commit will re-check selected/active
streams condition on pad-added and reconfigure output if needed.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2482>
2022-05-25 13:50:17 +00:00
Eli Schwartz
79c3bbc2ed meson: use better zlib dependency fallback
zlib is required, and if it isn't found it is checked several ways and
then forced via subproject(). This code was added in commit
b93e37592a, to account for systems where
zlib doesn't have pkg-config files installed.

But Meson already does dependency fallback, and also, since 0.54.0, does
the in-between checks for find_library('z') and has_header('zlib.h') via
the "system" type dependency. Simplify dependency lookup by marking it
as required, which also makes sure that the console log doesn't
confusingly list "not found".

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2484>
2022-05-24 19:39:29 +00:00
Sebastian Dröge
39568918de pbutils: Add GST_PBUTILS_CAPS_DESCRIPTION_FLAG_METADATA and ONVIF XML Timed MetaData
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2453>
2022-05-20 13:01:44 +00:00
Thibault Saunier
3296c678b3 rtcpbuffer: Allow padding on first reduced size packets
It is valid to have the padding set to 1 on the first packet and it
happens very often from TWCC packets coming from libwebrtc. This means
that we were totally ignoring many TWCC packets.

Fix test that checked that a first packet with padding was not valid and
instead test a single twcc packet with padding to check precisely what
this patch was about.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2422>
2022-05-18 14:34:44 +00:00
Alicia Boya García
bf9092592e appsink: Fix race condition on caps handling
Background:

Whenever a caps event is received by appsink, the caps are stored in the
same internal queue as buffers. Only when enough buffers have been
popped from the queue to reach the caps, `priv->sample` gets its caps
updated to match, so that they are correct for the following buffers.

Note that as far as upstream elements are concerned, the caps of appsink
are updated immediately when the CAPS event is sent. Samples pulled from
appsink retain the old caps until a later buffer -- one that was sent by
upstream elements after the new caps -- is pulled.

The race condition:

When a flush is received, appsink clears the entire internal queue. The
caps of `priv->sample` are not updated as part of this process, and
instead remain as those of the sample that was last pulled by the user.

This leaves open a race condition where:
1. Upstream sends a new caps event, and possibly some buffers for the
   new caps.
2. Upstream sends a flush (possibly from a different thread).
3. Upstream sends a new buffer for the new caps. Since as far as
   upstream is concerned, appsink caps are the new caps already, no new
   CAPS event is sent.
4. The appsink user pulls a sample, having not pulled before enough
   samples to reach the buffers sent in step 1.

Bug: the pulled sample has the old caps instead of the new caps.

Fixing the race condition:

To avoid this problem, when a buffer is received after a flush,
`priv->sample`'s caps should be updated with the current caps before the
buffer is added to the internal queue.

Interestingly, before this patch, appsink already had code for this, in
gst_app_sink_render_common():

    /* queue holding caps event might have been FLUSHed,
     * but caps state still present in pad caps */
    if (G_UNLIKELY (!priv->last_caps &&
            gst_pad_has_current_caps (GST_BASE_SINK_PAD (psink)))) {
      priv->last_caps = gst_pad_get_current_caps (GST_BASE_SINK_PAD (psink));
      gst_sample_set_caps (priv->sample, priv->last_caps);
      GST_DEBUG_OBJECT (appsink, "activating pad caps %" GST_PTR_FORMAT,
          priv->last_caps);
    }

This code assumes `priv->last_caps` is reset when a flush is received,
which makes sense, but unfortunately, there was no code in the flush
code path resetting it.

This patch adds such code, therefore fixing the race condition. A unit
test demonstrating the bug and testing its behavior with the fix has
also been added.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2413>
2022-05-17 08:49:30 +00:00
U. Artie Eoff
c9417a1dea videoaggregator: unref temporary caps
The "possible_caps" needs unref after finished using to
avoid memory leak.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2430>
2022-05-16 22:38:13 +00:00
Seungha Yang
1aca8ad289 tools: gst-play: Print position even if duration is unknown
Gives better visual feedback regarding position information
although duration is unknown, live streams for example.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2365>
2022-05-13 21:39:35 +00:00
Matthew Waters
a1f30f5b9b gl/context: disable timer queries for ARM Mali-G52
Performing a timer query with a default framebuffer that is incomplete
(from using a surfaceless context) will produce GL errors.  Disable the
timer query on this platform to avoid the errors.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2396>
2022-05-12 00:22:21 +00:00
Seungha Yang
66f017f8ea tools: device-monitor: Print string property as-is without serialize
gst_value_serialize() does more than what's needed to printf-ing
especially when given GValue is already string. Just print string
value as-is without gst_value_serialize() to avoid unreadable
string print, especially for multi-bytes character encoding cases.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2387>
2022-05-07 04:43:49 +09:00
Edward Hervey
53bb864244 playbin3: Cleanup and refactor combiner sourcecombine
* Remove fields no longer used, or that can be replaced by smaller code
* Rename "channels" to a more meaningful "input pads"
* Directly handle/use combiner pads in the combiners instead of on the playbin3
  main structure

Remove the corresponding combiner sinkpad whenever a uridecodebin3 source pad
goes away
* If used, store the corresponding combiner sink pad in the SourcePad helper
  structure

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2384>
2022-05-06 09:10:09 +02:00
Edward Hervey
17aa70b888 parsebin: Don't modify inexistant GstStream
When handling exposing un-handled streams, we can only replace the GstStream for
those we are creating ourselves (i.e. the fallback collection).

Fixes assertions when the demuxer creates those streams

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2353>
2022-05-04 07:26:39 +00:00
Edward Hervey
4be8b1b0a1 playbin3: Don't use unknown types for default selection
When creating a fallback default selection from a collection, don't attempt to
use unknown stream types

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2353>
2022-05-04 07:26:39 +00:00
Sebastian Dröge
2eee3f4ca4 audioconvert: If no channel-mask can be fixated then use a NONE channel layout
Otherwise this is generating caps without a channel-mask, which is
invalid for >1 channels and will always fail negotiation.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2350>
2022-05-03 13:41:07 +03:00
Nicolas Dufresne
f35a507b19 doc: Update cache for NV12_4L4 and NV12_16LE32 gl support
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2190>
2022-05-02 19:10:43 +00:00
Nicolas Dufresne
79ea87f256 opengl: Add NV12_4L4 conversion support
This format is produced notably by Hantro G1/G2 HW. Using a shader instead of
the Hantro embedded converter helps reduce drastrictly the memory usage at a
relatively small GPU overhead.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2190>
2022-05-02 19:10:43 +00:00
Nicolas Dufresne
39615e4f3c opengl: Add NV12_16L32S conversion support
This adds a first detiling shader with initial support for
NV12_16L32S as produced by Mediatek decoders.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2190>
2022-05-02 19:10:43 +00:00
Nicolas Dufresne
77a88c4572 glsl: Enable GLSL 1.30 if we have OpenGL 3.0/3.1
As implemented, we only support OpenGL 3 API from version 3.2. Though, there
is no issue enabling GLSL 1.30 even if we are going to restrict our API usage
to 2. This allows using texelFetch() on OpenGL 3.0 and 3.1 drivers.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2190>
2022-05-02 19:10:43 +00:00
Nicolas Dufresne
4b4d607f4c opengl: Add low level support for tiled formats
This adds support for tiled format in stride and plane size
code.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2190>
2022-05-02 19:10:43 +00:00
Nicolas Dufresne
6a6c3687f1 video: Port video frame to the new tile size helper
This is now moved to the library, so it can be used in multiple
places.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2190>
2022-05-02 19:10:43 +00:00
Nicolas Dufresne
8fcfc44c15 video: Add a helper to get the tile size information
Since the addition of tiling format with subsampled tile size
(NV12_16L32S), getting the tile width/height shifts and tile
size have become more complex. Add a helper to extract and
scale this information for the selected plane and format.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2190>
2022-05-02 19:10:43 +00:00
Nicolas Dufresne
04339c8df5 eglimage: Add missing NV21/61 support
Caps would allow that, but selecting this format would lead to
an "no reached" assertion in the code.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2190>
2022-05-02 19:10:43 +00:00
Philippe Normand
b8e3d167ea videodecoder: release stream lock after handling gap events
The stream lock is taken before handling gap events but was not released in all
possible runtime situations. This issue was introduced in:
https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/-/merge_requests/1274

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2307>
2022-04-28 07:12:28 +00:00
Matthew Waters
0f9f179bec subparse: don't deref a potentially NULL variable
If the html SAMI data is malformed, then retrieving the attribute name
may fail.  We then cannot retrieve the attribute value.

Fixes: https://oss-fuzz.com/testcase-detail/4700130671984640
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2317>
2022-04-28 15:35:12 +10:00
Edward Hervey
0125d7525a parsebin: Expose streams of unknown type
This actually respects the existing `expose-all-streams` property by exposing
them and having them present in the stream collection (as streams of type
unknown).

Fixes #1179

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2309>
2022-04-27 16:24:55 +00:00
Edward Hervey
9e2bb037f0 playbin2: Remove dead code
blacklisted_mimes has been empty for ages. Remove the code "using" it.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2306>
2022-04-27 13:13:17 +00:00
Mathieu Duponchelle
14b37268f6 timeoverlay: add support for reference timestamp time mode
+ update date-time mode to actually use the timestamp that
  was selected with the time-mode property

Co-authored-by: Sebastian Dröge <sebastian@centricular.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2252>
2022-04-27 12:35:21 +00:00
Mathieu Duponchelle
a03db32bbe rtpbasepayload: always store input buffer meta before negotiation
The decision to store the input buffer depends on whether extensions
are to be added to the output buffer, I assume as an optimization.

This creates an issue for subclasses that call negotiate(), where
header_exts is actually populated, from their handle_buffer()
implementation: at chain time, no header extension has been negotiated
yet, which means that we don't add extensions to the first batch of
buffers that comes out.

Keep track of whether negotiate has been called (this is different
from the negotiated field) and always store the input buffer until
then. This fixes the issue while largely preserving the optimization.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2304>
2022-04-27 08:43:30 +00:00
He Junyan
f55b36e6aa videoscale: Fix the src video info error in transfer_colorimetry_from_input()
Pipeline such as:
gst-launch-1.0 -vf videotestsrc ! video/x-raw,format=NV12,colorimetry=\(string\)bt709 \
 ! videoscale ! video/x-raw,format=I420 ! fakesink
Always trigger a error:
ERROR             video-info video-info.c:556:gst_video_info_from_caps: no width property given

Because it is called before the fixate_size(), the src caps' resolution
may be absent or not fixed. That causes that the src video info can not
be created correctly and we can not inherit the colorimetry and chroma-site
from the input caps.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2289>
2022-04-26 14:17:50 +00:00
Guillaume Desmottes
c0d7d5c2c8 videorate: fix assertion when pushing last and only buffer without duration
Fixing this pipeline:
  gst-launch-1.0 filesrc location=sample.png ! pngdec ! videorate ! fakesink

- videorate receives a single buffer with pts = 0, duration = invalid;
- then it receives eos triggering this buffer to be pushed downstream;
- the pushing code was assuming that a duration was set, which is
  impossible as we received a single buffer and no output framerate was
  set either. So the best we can do is to push the buffer without
  duration.

Fix #1177

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2296>
2022-04-26 13:43:56 +00:00
Edward Hervey
7b5f867e40 oggdemux: Protect against invalid framerates
This check wasn't done for all mappings.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2295>
2022-04-26 09:29:39 +02:00
Xavier Claessens
1a0eea3299 Meson: Fix deprecation warnings
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1876>
2022-04-23 00:33:00 +00:00
Sebastian Dröge
760b070db9 Revert "videorate: Update the base time on segment updates"
This reverts commit 75b4809ebc.

See https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2186

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2254>
2022-04-22 23:05:57 +00:00
Sebastian Dröge
c39fb85c9b Revert "videorate: Add test for segment update"
This reverts commit a76f38b2c7.

See https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2186

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2254>
2022-04-22 23:05:57 +00:00
Sebastian Dröge
2599cf573a Revert "videorate: Only "close" the segment if it is discontinous"
This reverts commit 6f7922b4db.

See https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2186

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2254>
2022-04-22 23:05:57 +00:00
Sebastian Dröge
98112a3ddc Revert "videorate: Drop incoming buffers that are outside of the segment"
This reverts commit 24fd80344d.

See https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2186

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2254>
2022-04-22 23:05:57 +00:00
Sebastian Dröge
a797962d26 Revert "videorate: Add unit test for closing a segment and opening a separate one"
This reverts commit 98f2a84a28.

See https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2186

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2254>
2022-04-22 23:05:57 +00:00
Mathieu Duponchelle
4ef3b1ad8f videoaggregator: keep old buffer when processing a MISSING_DATA gap
GAP events flagged with MISSING_DATA are transformed into GAP buffers
flagged with CORRUPTED.

In these cases, it is preferable to simply keep rendering the previous
buffer (if there was one) instead of flashing the pad in and out of
view.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/708>
2022-04-22 17:43:50 +00:00
Mathieu Duponchelle
7988acad36 compositor: fix prepare_frame obscuring check
A pad without a buffer or with a GAP buffer cannot obscure a
pad below it. Ignore those when considering whether a pad should
be drawn.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/708>
2022-04-22 17:43:50 +00:00
Mathieu Duponchelle
cc3a79d7f1 compositor: a pad without a frame can't obscure the background
Skip those when considering whether the background should be
drawn

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/708>
2022-04-22 17:43:50 +00:00
Olivier Crête
2613930372 videoscale: Add test to ensure that non-scaled metas are kept
Just make sure that we're not breaking non-scaled metas

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1630>
2022-04-22 13:00:01 +00:00
James Cowgill
2290af332b videoscale: Add test for transform_meta function
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1630>
2022-04-22 13:00:01 +00:00
James Cowgill
c8a24146c4 videoscale: Don't copy scaled metas
Returning TRUE from the `transform_meta` function tells
GstBaseTransform to copy the meta into the new buffer. If videoscale
has already transformed a meta by scaling it, it should always return
FALSE to avoid duplicating the meta.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1630>
2022-04-22 13:00:01 +00:00
Nirbheek Chauhan
52d7370311 x11: Fix unused variable warnings
These are emitted when XInput 2 is not available.

```
../subprojects/gst-plugins-base/sys/ximage/ximagesink.c: In function ‘gst_x_image_sink_handle_xevents’:
../subprojects/gst-plugins-base/sys/ximage/ximagesink.c:696:29: warning: unused variable ‘state’ [-Wunused-variable]
  696 |   GstNavigationModifierType state = GST_NAVIGATION_MODIFIER_NONE;
      |                             ^~~~~
../subprojects/gst-plugins-base/sys/ximage/ximagesink.c:694:35: warning: unused variable ‘touch_frame_open’ [-Wunused-variable]
  694 |   gboolean pointer_moved = FALSE, touch_frame_open = FALSE;
      |                                   ^~~~~~~~~~~~~~~~
../subprojects/gst-plugins-base/sys/xvimage/xvimagesink.c: In function ‘gst_xv_image_sink_handle_xevents’:
../subprojects/gst-plugins-base/sys/xvimage/xvimagesink.c:427:35: warning: unused variable ‘touch_frame_open’ [-Wunused-variable]
  427 |   gboolean pointer_moved = FALSE, touch_frame_open = FALSE;
      |                                   ^~~~~~~~~~~~~~~~
../subprojects/gst-plugins-base/sys/xvimage/xvimagesink.c:426:29: warning: unused variable ‘state’ [-Wunused-variable]
  426 |   GstNavigationModifierType state = GST_NAVIGATION_MODIFIER_NONE;
      |                             ^~~~~
```

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2093>
2022-04-22 12:26:55 +00:00
Thibault Saunier
add38d537c tests: convertscale: Do not log EOS events in validateflow
We already checked that we are getting an EOS before going back to ready
and adding the EOS at the end of the .validateflow is racy as the ERROR
message might reach the bus before it is logged.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2264>
2022-04-21 12:50:43 -04:00
Thibault Saunier
cd7a91cef1 videoconvertscale: Add properties to disable scaling/converting in videoconvert/videoscale
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/898>
2022-04-20 17:09:20 -04:00
Thibault Saunier
f3fd4d7e90 videoconvertscale: Don't claim we can support any kind of memory
Since d0133a2d11 "videoconvert: Allow
passthrough for ANY caps features" videoconvert will always claim that
it supports any kind of memory which is true in very specific case (when
it is running in passthrough mode). To get elements that autoplug
converters depending on the caps running in the pipeline (like
autovideoconvert), we need to have converters no lie about what they can
do when queried `accept_caps` or `query_caps`.

This still accepts any caps feature as before but it introduces
a restriction in the way we handle memory capsfeatures.

We keep previous behaviour in videoconvert and videoscale.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/898>
2022-04-20 17:03:21 -04:00
Thibault Saunier
d11f13f476 Introduce the videocolorscale element
Now that videoconvert and videoscale's are both based on
GstVideoConverter and are using the exact same code, it makes much more
sense to have one element doing the two operation, and it can be
more efficient in some cases (one single path for both operations).

This removes the `videoscale` and `videoconvert` plugins but keeps the element
but makes them also do both operations (adding some APIs to each element).

There is a small change in API for the `videoscale:dither` property which
was previously a totally unused boolean, it is now an enum and is used.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/898>
2022-04-20 17:03:21 -04:00
Sebastian Dröge
06f90deb5f sdp: Parse the RFC5576 Source-specific media SDP attributes into caps
The format of the caps fields is
    ssrc-(SSRC_VALUE)-(ATTRIBUTE_NAME)=(ATTRIBUTE_VALUE)
.

Parsing of the attributes from the caps into the SDP is not implemented
as this depends not only a single stream's caps but on the whole rtpbin
configuration.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2132>
2022-04-20 14:40:25 +00:00
Camilo Celis Guzman
4c0d64dd10 gstglmixerbin: minor refactor of _find_element_pad_template
As suggested by @slomo, make the loop more readable and prevent returning
a garbage value to the caller from the previous implementation.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2232>
2022-04-20 07:04:44 +00:00
Xavier Claessens
e950095867 Always define ENABLE_NLS
GLib guarantees libintl API is always available, provided by
proxy-libintl as last resort. GLib itself unconditionally define
ENABLE_NLS.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2028>
2022-04-19 18:01:06 +00:00
Xavier Claessens
82ca0e291b Delete unused i18n headers
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2028>
2022-04-19 18:01:06 +00:00
Xavier Claessens
b99ecc78ca Replace gst-i18n-*.h with gi18n-lib.h
GLib guarantees libintl is always present, using proxy-libintl as
last resort. There is no need to mock gettex API any more.

This fix static build on Windows because G_INTL_STATIC_COMPILATION must
be defined before including libintl.h, and glib does it for us as part
as including glib.h.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2028>
2022-04-19 18:01:06 +00:00
Xavier Claessens
50b58aa974 gst-play: Do not split translatable string
Concatenating N_() strings does not work with gi18n.h macro, was working
only with GStreamer's redefinition.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2028>
2022-04-19 18:01:06 +00:00
Thibault Saunier
c033f8fad2 cuda: Factor out a public GstCUDA library
So applications and elements implemented outside GStreamer can reuse
our infrastructure

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1472>
2022-04-19 16:39:43 +00:00
Nicolas Dufresne
b7ded51382 video: Fix possible overrun when iterating comp[] array
Fix 2 iterations that can overrun the array if the number of component is
equal to the size of the array.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2239>
2022-04-19 11:12:42 -04:00
Nicolas Dufresne
e0ad0eda23 Revert "video-frame: avoid possible out of bound memory access"
This reverts commit c4255f08f7.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2239>
2022-04-19 10:57:14 -04:00
Nirbheek Chauhan
97655eb8ac meson: Add -Wl,-rpath,${libdir} on macOS
We made the gstreamer installation prefix relocatable by picking up
plugins relative to the location of libgstreamer-1.0.dylib, similar to
how it's done for Windows:

https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1627

This had a lot of side-effects:

https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1051
https://gitlab.freedesktop.org/gstreamer/cerbero/-/issues/363
https://gitlab.freedesktop.org/gstreamer/cerbero/-/issues/371
https://gitlab.freedesktop.org/gstreamer/cerbero/-/issues/362

A partial fix for the cerbero side of these was:

https://gitlab.freedesktop.org/gstreamer/cerbero/-/merge_requests/807

However, this relied on the consumers knowing that they need to add
`LC_RPATH` entries to the libdir of the prefix. This is done
automatically by build systems like Meson, but not by others, such as
Autotools, CMake, Cargo, XCode, etc. For those, we need to add the
RPATH entries to the gstreamer-1.0.pc file.

This also has the side-effect of fixing the loading of gstreamer rust
plugins on macOS:

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1159

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1149

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2218>
2022-04-19 12:11:17 +00:00
Camilo Celis Guzman
c4255f08f7 video-frame: avoid possible out of bound memory access
Although the components' initialization code would fill in -1 to all
unset components, make the code a bit more defensive and check for an
index bound first.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2231>
2022-04-19 11:18:52 +00:00
Ruben Gonzalez
70579285a8 gst_plugin_load_file: force plugin reload if diff filename
If a file includes a new version of a plugin that exits in the
registry, the output of gst-inspect is incorrect. The output has the
correct version but incorrect filename, and element description.

This seems to have also fixed some documentation issues.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1344>
2022-04-19 14:26:08 +05:30
Guillaume Desmottes
e482b995fb decodebin3: fix collection leak
get_merged_collection() returns an owned stream collection and was
leaked in the else block.

Fix leak when running:
GST_TRACERS=leaks GST_DEBUG="GST_TRACER:7,leaks:6" gst-play-1.0 --use-playbin3 test.mkv

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/954>
2022-04-18 09:41:12 +03:00
hoonhee.lee
3d9f25d322 playbin3: fix missing lock when unknown stream type in pad-removed cb
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2193>
2022-04-16 01:31:18 +00:00
Edward Hervey
ed5db9bce7 decodebin3: Don't duplicate stream selections
Make sure that the requested stream selection isn't identical to the current
one. If that's the case, just carry on as usual.

This avoids multiple `streams-selected` posting ... when the selection didn't
change.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2185>
2022-04-16 00:56:14 +00:00
Tim-Philipp Müller
f515ee6bdf appsrc: fix annotations
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2188>
2022-04-15 23:49:40 +00:00
Sebastian Dröge
fa070d20cf rtpbasepayload: Don't write header extensions if there's no corresponding input buffer for the packet
The GstRTPHeaderExtension API requires the input buffer to exist.

This can happen if the output packet is generated e.g. from a caps or
tags event like in the case for rtpgstpay.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2198>
2022-04-15 19:56:49 +03:00
Brad Hards
488b760e7e tests: rename 'icles' subdir to be more descriptive
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2178>
2022-04-14 11:57:11 +00:00
Seungha Yang
5ec1d85494 meson: gst-play: Restore Windows high-resolution timer support
Fix regression of the commit 2952a73f40

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2154>
2022-04-12 19:36:49 +00:00
Seungha Yang
2548014dfc win32: Enable high-resolution timer for MinGW build
timeapi.h is missing in our MinGW toolchain. Include mmsystem.h
header instead, which defines struct and APIs in case of our MinGW
toolchain. Note that in case of native Windows10 SDK (MSVC build),
mmsystem.h will include timeapi.h

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2153>
2022-04-12 15:09:16 +00:00
Sebastian Dröge
c1a3aaa3ec Fix transfer gobject-introspection annotation typos
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2160>
2022-04-12 12:43:08 +00:00
Matthew Waters
c2ac57f6c9 subparse: don't try to index string with -1
If the len of the string turns out to be 0, str[len - 1] resolved to
str[-1] which is not a good idea.

Fixes: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=46543
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2147>
2022-04-10 10:57:08 +10:00
Matthew Waters
62d09f73b7 ogg: fix possible buffer overrun
If an ogg stream does not match our expectations of how the end of a
buffer may be structured, it was possible to read memory past the end of
the buffer parsed by libogg.  Include a bounds check for this case and
stop parsing.

Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=3930

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2134>
2022-04-08 08:52:45 +00:00
Mathieu Duponchelle
4c98e2d289 rtpbasepayload: fix transfer annotation for push and push_list
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2133>
2022-04-08 07:20:31 +00:00
hoonhee.lee
27b945aa03 riff-media: fix memory leak after usage for g_strjoin
This leak is observed with valgrind.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2129>
2022-04-07 20:36:42 +00:00
Bastian Krause
c39181903e gltransformation: let graphene alloc its structures memory aligned
With NEON instructions enabled, graphene expects the memory passed to it
16-byte-aligned. Otherwise unaligned memory access faults occur causing
SIGBUS signals.

graphene has alloc functions for its structures that take care of this,
so use them.

See also: https://github.com/ebassi/graphene/issues/215#issuecomment-794744829

Suggested-by: Sebastian Dröge <sebastian@centricular.com>
Signed-off-by: Bastian Krause <bst@pengutronix.de>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1321>
2022-04-06 18:14:53 +02:00
Nirbheek Chauhan
bfe43121f1 appsrc: Clarify buffer ref semantics in signals
The documentation could be read to mean that the caller continuous to
'own' the buffer, and that there is some other mechanism to find out
when to unref it.

Clarify that "not taking ownership" here means "taking a reference",
and specify that you can unref it at any time after calling the
function.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2110>
2022-04-05 14:40:21 +00:00
Zhao Zhili
dd27850a9a examples: fix build on macOS with gtk+-quartz-3.0
gdk_quartz_window_get_nsview is not declared in the header file now:
error: implicit declaration of function 'gdk_quartz_window_get_nsview'
is invalid in C99 [-Werror,-Wimplicit-function-declaration]

fixes #979

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2095>
2022-04-04 16:27:45 +00:00
Haihua Hu
df0958e855 ximagesink/xvimagesink: use GST_XINITTHREADS to ensure call to XInitThreads
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2098>
2022-04-04 15:49:02 +08:00
Xavier Claessens
a40634eebe Use gmodule-no-export-2.0
We don't need `-Wl,--export-dynamic`, that's used only for executables
that needs to export an API to be used by plugins they load.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2031>
2022-04-01 16:32:17 +00:00
Xavier Claessens
b004464ac6 Remove glib and gobject dependencies everywhere
They are part of gst_dep already and we have to make sure to always have
gst_dep. The order in dependencies matters, because it is also the order
in which Meson will set -I args. We want gstreamer's config.h to take
precedence over glib's private config.h when it's a subproject.

While at it, remove useless fallback args for gmodule/gio dependencies,
only gstreamer core needs it.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2031>
2022-04-01 16:32:17 +00:00
Xabier Rodriguez Calvar
199b62570f glcolorconvert: should copy metadatas from the incoming buffer
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2094>
2022-04-01 13:07:46 +02:00
Sebastian Dröge
16ed0a6961 playbin/playbin3: Allow setting a NULL URI
The URI is already initialized to NULL at the beginning and GstPlayer
was assuming that it is possible to set to NULL at a later time too.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1124

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2090>
2022-04-01 10:25:23 +03:00
Thibault Saunier
b358897a3b navigation: Rename parse_state to parse_modifier_state
`parse_state` sounds a bit weird and `parse_modifier_state` is clearer.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2087>
2022-04-01 06:38:43 +00:00
Stéphane Cerveau
8492dd4255 base:gl: add x11 deps to gstglx11_dep
On MacOS with homebrew the xlib-xcb.h is in
own cellar /opt/homebrew/Cellar/libx11/1.7.3.1/include
Need to add the windowing dependencies to gl tests

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2061>
2022-04-01 00:43:54 +00:00
Xavier Claessens
368f7b2cf2 overlay: Fix qt support detection
On Ubuntu moc-qt5 command is called moc. This requires Meson 0.54.0 for
the new has_tools() method.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2075>
2022-03-30 22:54:57 +00:00
Seungha Yang
f465156bf9 gst-play: Improve Win32 keyboard input handling
The console HANDLE will be keep signalled state unless application
reads console input buffer immediately. So we should read and flush
console input buffer from the thread where the event is signalled,
instead of GMain context thread.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2058>
2022-03-30 20:37:54 +00:00
Thibault Saunier
2952a73f40 tools: Add support for building gstreamer tools against gst-full
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1581>
2022-03-30 17:43:17 +00:00
Enrique Ocaña González
2a30f1038a playsink: improve GL context sharing
Configure playsink tried element with the bus of the main pipeline.
That tried element can be a gl video sink, which would benefit from being
able to propagate context messages to the main pipeline and have other
internal pipeline elements configured with it. Having different elements
configured with the same GL context allows them to share buffers with
video/x-raw(memory:GLMemory) caps and achieving zero-copy.

Thanks to Alicia Boya García <aboya@igalia.com> for her work co-debugging
the issue and contributing to find a solution.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2056>
2022-03-30 15:32:19 +00:00
Edward Hervey
a6f213ad62 urisourcebin: When streams-aware, remove pads immediately
For the same reason we add them immediately

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1905>
2022-03-30 14:30:54 +00:00
Edward Hervey
8648182fd1 urisourcebin: Don't wait for pads content when streams-aware
If the adaptive demux is streams-aware it can add/remove pads at any point in
time without the need for no-more-pads or data blocking

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1905>
2022-03-30 14:30:54 +00:00
Edward Hervey
76d01f0d73 urisourcebin: Don't do buffering if source already does
Sources that can internally handle buffering shouldn't have yet-another
buffering element after it. This can be simply detected by checking if it can
answer a TIME BUFFERING query just after creation.

If that is the case, we can expose the element source pads directly

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1905>
2022-03-30 14:30:54 +00:00
Edward Hervey
7eea928dd0 decodebin3: Handle upstream selection
Detect if upstream handles stream-selection, and if so bypass all stream
selection handling (streams are forwarded as-is).

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1905>
2022-03-30 14:30:54 +00:00