The wordlen ("length") MUST represent the total "number of 32-bit words
in the extension, excluding the four-octet extension header" (rfc3550).
There are cases where already existent padding is reused for adding
the new extension. So the new wordlen should be updated if the new
added extension makes it to increase.
This patch introduces a property which, if set to FALSE, prevents RTP
basepayloader from scaling the RTP time when a segment's rate is not
equal to 1.0. The specification is ambiguous on this subject and some
clients expect the timestamps not to be scaled.
By setting the extension-ID for TWCC (Transport Wide Congestion Control),
the payloader will embed sequencenumbers as a RTP header-extension
according to https://tools.ietf.org/html/draft-holmer-rmcat-transport-wide-cc-extensions-01#section-2
The negotiation of this being enabled with downstream elements
is done with caps reflecting the way this is communicated using SDP.
With commit "basepayload: Expose onvif-no-rate-control property" the rtp
timestamp changed behaviour when rate control is disabled.
When disabling rate control, we must take care of the stream time to
avoid the timestamps to begin from zero again.
Save push/push_list helper flow return and in case of failure, return it
in the process function. This allow forwarding downstream flow return
even if the subclass is using the push/push_list helper.
basedepayload generates its own segment in a pretty unconventional
manner, relying on information in the caps such as npt-start or
npt-stop, usually set by rtspsrc.
In ONVIF mode, rtspsrc will generate the correct segment and this
logic in rtpbasedepayload will not be needed, this commit allows
rtspsrc to signal that through the caps.
Add max-reorder property to make the old hard coded reordering limit of
100 configurable. It's particularly useful in some scenarios to set
max-reorder=0 to disable the behavior that the depayloader will drop
packets.
Note that although the default value is 100, the default limit has
increased with one because of the changed if-test. This was done to
allow the max-reorder value to be more intuitive. See tests.
Since we started depending on GLib 2.44, we can be sure this macro is
defined (it will be a no-op on compilers that don't support it). For
plugins we should just start using `G_DECLARE_FINAL_TYPE` which means we
no longer need the macro there, but for most types in base/gst-libs we
don't want to break ABI, which means it's better to just keep it like it
is (and use the `#ifdef` instead).
The function rtcp_packet_min_length() returns a length for each known type
and -1 for unknown types. This change fixes the test accordingly and silences
the following warning.
gstrtcpbuffer.c:567:12: error: comparison of constant -1 with expression of type 'GstRTCPType' is always false
[-Werror,-Wtautological-constant-out-of-range-compare]
if (type == -1)
Before a gap event is pushed downstream a segment event must be pushed
since the gap event can cause packet concealment downstream and hence
data flow. Since concealment before receiving any data packets usually
doesn't make any sense, the gap event is not sent downstream.
Alternatively one could generate a default caps and segment event, but
no need to complicate things until it's proven necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=773104https://gitlab.freedesktop.org/gstreamer/gst-plugins-base/issues/301
Checking the address distance between given begin/end sequence
doesn't make sense. They are output params.
This is to fix weird failure of libs_rtp on Windows
Code in g_return_*() must not have side effects, as it
might be compiled out if -DG_DISABLE_CHECKS is used, in
which case we would read garbage off the stack.
According to RFC3611, the extended report blocks in XR packet can
have variable length. To visit each block, the iterator should look
into block header. Once XR type is extracted, users can parse the
detailed information by given functions.
Loss/Duplicate RLE
The Loss RLE and the Duplicate RLE have same format so
they can share parsers. For unit test, randomly generated
pseudo packet is used.
Packet Receipt Times
The packet receipt times report block has a list of receipt
times which are in [begin_seq, end_seq).
Receiver Reference Time paser for XR packet
The receiver reference time has ntptime which is 64 bit type.
DLRR
The DLRR report block consists of sub-blocks which has ssrc, last RR,
and delay since last RR. The number of sub-blocks should be calculated
from block length.
Statistics Summary
The Statistics Summary report block provides fixed length
information.
VoIP Metrics
VoIP Metrics consists of several metrics even though they are in
a report block. Data retrieving functions are added per metrics.
https://bugzilla.gnome.org/show_bug.cgi?id=789822
Add a source-info property that will read/write meta to the buffers
about RTP source information. The GstRTPSourceMeta can be used to
transport information about the origin of a buffer, e.g. the sources
that is included in a mixed audio buffer.
A new function gst_rtp_base_payload_allocate_output_buffer() is added
for payloaders to use to allocate the output RTP buffer with the correct
number of CSRCs according to the meta and fill it.
RTPSourceMeta does not make sense on RTP buffers since the information
is in the RTP header. So the payloader will strip the meta from the
output buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=761947
For each lib we build export its own API in headers when we're
building it, otherwise import the API from the headers.
This fixes linker warnings on Windows when building with MSVC.
The problem was that we had defined all GST_*_API decorators
unconditionally to GST_EXPORT. This was intentional and only
supposed to be temporary, but caused linker warnings because
we tell the linker that we want to export all symbols even
those from externall DLLs, and when the linker notices that
they were in external DLLS and not present locally it warns.
What we need to do when building each library is: export
the library's own symbols and import all other symbols. To
this end we define e.g. BUILDING_GST_FOO and then we define
the GST_FOO_API decorator either to export or to import
symbols depending on whether BUILDING_GST_FOO is set or not.
That way external users of each library API automatically
get the import.
While we're at it, add new GST_API_EXPORT in config.h and use
that for GST_*_API decorators instead of GST_EXPORT.
The right export define depends on the toolchain and whether
we're using -fvisibility=hidden or not, so it's better to set it
to the right thing directly than hard-coding a compiler whitelist
in the public header.
We put the export define into config.h instead of passing it via the
command line to the compiler because it might contain spaces and brackets
and in the autotools scenario we'd have to pass that through multiple
layers of plumbing and Makefile/shell escaping and we're just not going
to be *that* lucky.
The export define is only used if we're compiling our lib, not by external
users of the lib headers, so it's not a problem to put it into config.h
Also, this means all .c files of libs need to include config.h
to get the export marker defined, so fix up a few that didn't
include config.h.
This commit depends on a common submodule commit that makes gst-glib-gen.mak
add an #include "config.h" to generated enum/marshal .c files for the
autotools build.
https://bugzilla.gnome.org/show_bug.cgi?id=797185
The default implementation for packet loss handling previously
always sent a gap event.
While this is correct as long as we know the packet that was
lost was actually a media packet, with ULPFEC this becomes
a bit more complicated, as we do not know whether the packet
that was lost was a FEC packet, in which case it is better
to not actually send any gap events in the default implementation.
Some payloaders can be more clever about, for example VP8 can
use the picture-id, and the M and S bits to determine whether
the missing packet was inside an encoded frame or outside,
and thus whether if it was a media packet or a FEC packet,
which is why ulpfecdec still lets these lost events go through,
though stripping them of their seqnum, and appending a new
"might-have-been-fec" field to them.
This is all a bit terrible, but necessary to have ULPFEC
integrate properly with the rest of our RTP stack.
https://bugzilla.gnome.org/show_bug.cgi?id=794909
