Wait until at least one keyframe has been parsed before
deciding to switch to passthrough mode, in case the
stream contains SEI messages that supplement the output
caps - for example by providing stereoscopic information
We were off by one byte in the matching
It should be (using 24 bit matching):
* startcode : 0000 0000 0000 0000 1000 00xx
* mask (bin) : 1111 1111 1111 1111 1111 1100
* mask (hex) : f f f f f c
* match : 0 0 0 0 8 0
https://bugzilla.gnome.org/show_bug.cgi?id=750685
Like SPS/PPS they do contain information which will be needed to
decode the following data (as per definition of the flag)
Also ensures that the series of SPS/PPS/SEI NALU before a keyframe
can be considered as one contiguous header
In the H263 spec, CPFMT is present only if the use of a custom
picture format is signalled in PLUSEPTYPE and UFEP is "001",
so we need to check params->format and only if the value is
6 (custom source format) the CPFMT should be read, otherwise
it's not present and wrong data will be parsed.
When reading the CPFMT, the width and height were not
calculated correctly (wrong bitmask).
https://bugzilla.gnome.org//show_bug.cgi?id=749253
Don't use the apis in codec-utils to extract the profile and level
syntax elements since it is wrong if there are emulation prevention
bytes existing in the byte-stream data.
https://bugzilla.gnome.org/show_bug.cgi?id=747613
Don't use the apis in codec-utils to extract the profile,tier and level
syntax elements since it is wrong if there are emulation prevention
bytes existing in the byte-stream data.
https://bugzilla.gnome.org/show_bug.cgi?id=747613
The detection for missing format/alignment is done way before this
codepath is reached (at which point we have already decided of a
format and alignment).
CID #1232800
This prevents it from going into passthrough after receiving 2
byte-stream caps (different ones) as it would keep the have_pps and
have_sps set to true and would just go into passthrough without
updating its caps.
This patch makes it reset its stream information to restart properly
when new caps are received.
https://bugzilla.gnome.org/show_bug.cgi?id=745409
This patch calls gst_h264_parser_parse_subset_sps() when a
SPS subset NAL type is found.
All the bits required for parsing the SPS subset in NALs were
already there, just we need to call them when the this NAL type
is found.
With this parsing, the number of views (minus 1) attribute is
filled, which was a requirement for negotiating the stereo-high
profile.
https://bugzilla.gnome.org/show_bug.cgi?id=743174
Initial support for MVC NAL units. It is only needed to propagate the
complete set of NAL units downstream at this time.
https://bugzilla.gnome.org/show_bug.cgi?id=696135
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Some video bitstreams report a too restrictive set of profiles. If a video
decoder was to strictly follow the indicated profile, it wouldn't support that
stream, whereas it could in theory and in practice. So we should relax the
profile restriction for allowing the decoder to get connected with parser.
https://bugzilla.gnome.org/show_bug.cgi?id=739992
Everytime a buffer is being provided from baseparse, we are parsing all the data from the beginning.
But since we would have already parsed some of the data in the previous iterations,
it doesnt make much sense to keep parsing the same everytime.
Hence skipping the data which is already read in previous iterations to improve the parsing performance.
https://bugzilla.gnome.org/show_bug.cgi?id=740058
Some video bitstreams report a too restrictive set of profiles. If a video
decoder was to strictly follow the indicated profile, it wouldn't support that
stream, whereas it could in theory and in practice. So we should relax the
profile restriction for allowing the decoder to get connected with parser.
https://bugzilla.gnome.org/show_bug.cgi?id=739992
Read PNG data chunk in one go by letting the parser
base class know the size we need, so that it doesn't
drip-feed us small chunks of data (causing a lot of
reallocs and memcpy in the process) until we have
everything.
Improves parsing performance of very large PNG files
(65MB) from ~13 seconds to a couple of millisecs.
https://bugzilla.gnome.org/show_bug.cgi?id=736176
This commit add an helper to convert a frame to frame-layer format and
use it to implement these two stream-format conversion:
- asf --> sequence-layer-frame-layer
- asf --> frame-layer
In simple/main profile, we basically have a raw frame, so building a
frame layer isn't too complicated. But in advanced profile, the first
frame-layer should contain sequence-header, entrypoint, and frame and
each keyframe should contain entrypoint, so we have to handle these
carefully.
https://bugzilla.gnome.org/show_bug.cgi?id=738526
Add an helper to check that output stream-format is coherent with
profile and header-format. It also check if we know how to do the
conversion if the input stream-format differs from selected
output-format.
So, in case output stream-format is not allowed, it will now fail at
negotiation rather than in pre_push_frame.
https://bugzilla.gnome.org/show_bug.cgi?id=738526
This commit introduces an helper to convert an ASF frame to BDUs format with
startcodes and use this helper to implements following stream-format
conversions:
- asf --> bdu
- asf --> sequence-layer-bdu
- asf --> sequence-layer-raw-frame
https://bugzilla.gnome.org/show_bug.cgi?id=738526
It add the support of following stream-format conversion:
- bdu --> sequence-layer-bdu
- bdu-frame --> sequence-layer-bdu-frame
- frame-layer --> sequence-layer-frame-layer
For these conversion, the only requirements is to push a sequence-layer
buffer prior to data.
https://bugzilla.gnome.org/show_bug.cgi?id=738526
It prepares the template for stream-format conversion and it implements
the following conversion:
- sequence-layer-bdu --> bdu
- sequence-layer-bdu-frame --> bdu-frame
- sequence-layer-frame-layer --> frame-layer
Work is done in the pre_push_frame() method.
https://bugzilla.gnome.org/show_bug.cgi?id=738526
This parses the frame_packing_arragement() payload in SEI message.
This information can be used by decoders to appropriately rearrange the
samples which belong to Stereoscopic and Multiview High profiles.
https://bugzilla.gnome.org/show_bug.cgi?id=685215
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Some VC1 decoder can have different caps according to wmv format, ie
WMV3 or WVC1.
So instead of keeping the first available caps, we interserct with
current WMV format.
https://bugzilla.gnome.org/show_bug.cgi?id=738532
When stream-format is ASF or sequence-layer-raw-frame, we basically have
a raw frame so we can parse it to extract some information such the
keyframe flag. The only requirement is to have a valid sequence-header.
This commit parse the frame header and set the DELTA_UNIT buffer flag in
case the frame is not a keyframe.
https://bugzilla.gnome.org/show_bug.cgi?id=738519
frame-layer header is represented as a sequence of 32 bit unsigned
integer serialized in little-endian byte order, so framesize is on the
first 3 bytes.
SMPTE 421M Annex L.
https://bugzilla.gnome.org/show_bug.cgi?id=738243
GST_BASE_PARSE_FRAME_FLAG_PARSING value is wrong, and the same flag is
not being used presently. Hence changing the value and commenting it out.
This needs to be included in baseparse.h later on
https://bugzilla.gnome.org/show_bug.cgi?id=737411
Or not negotiated in the case we would be actually not negotiated
Currently we are getting assertions from
gst_pb_utils_add_codec_description_to_tag_list because of NULL
caps.
https://bugzilla.gnome.org/show_bug.cgi?id=737186
If we don't have a seq_layer_buffer, we also don't have a valid
seq_layer because there are set together in
gst_vc1_parse_handle_seq_layer().
So when output header format is sequence-layer and when we don't have a
seq_layer_buffer, we forge one from seq_hdr.
https://bugzilla.gnome.org/show_bug.cgi?id=736781
Sequence-layer and frame-layer are serialized in little-endian byte
order except for STRUCT_C and framedata fields as described in SMPTE 421M Annex
L.
https://bugzilla.gnome.org/show_bug.cgi?id=736750
This commit fix several issues with sequence layer header forging on
update_caps():
- 0x00000004 unsigned integer is before STRUCT_C.
- Set reserved bits of STRUCT_C to their values for simple/main
profiles in sequence layer header format and ASF header format.
- Sequence layer shall be represented as a sequence of 32 bits unsigned
integers and shall be serialized in little-endian byte order except
for STRUCT_C which shall be serialized in big-endian byte-order.
See SMPTE 421M Annex L for more details about sequence layer format.
https://bugzilla.gnome.org/show_bug.cgi?id=736474
Do more elaborate validation of the input caps: what fields
are required and/or not allowed. Don't assume AVC3 format
input without codec_data field is byte-stream format. Fix
up some now-unreachable code (CID 1232800).
It should try to use bytestream in these cases that the format
is set to _FORMAT_NONE as it seems that is what the 'else' clause
for bytestream can handle (by defaulting to _FORMAT_BYTESTREAM).
Always use a GstAdapter when collecting access units (alignment="au")
in either byte-stream or avcC format. This is required to properly
preserve config headers like SPS and PPS when invalid or broken NAL
units are subsequently parsed.
More precisely, this fixes scenario like:
<SPS> <PPS> <invalid-NAL> <slice>
where we used to reset the output frame buffer when an invalid or
broken NAL is parsed, i.e. SPS and PPS NAL units were lost, thus
preventing the next slice unit to be decoded, should this also
represent any valid data.
https://bugzilla.gnome.org/show_bug.cgi?id=732203
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Carefully track cases when skipping broken or invalid NAL units is
necessary. In particular, always allow NAL units to be processed
and let that gst_h264_parse_process_nal() function decide on whether
the current NAL needs to be dropped or not.
This fixes parsing of streams with SEI NAL buffering_period() message
inserted between SPS and PPS, or SPS-Ext NAL following a traditional
SPS NAL unit, among other cases too.
Practical examples from the H.264 AVC conformance suite include
alphaconformanceG, CVSE2_Sony_B, CVSE3_Sony_H, CVSEFDFT3_Sony_E
when parsing in stream-format=byte-stream,alignment=au mode.
https://bugzilla.gnome.org/show_bug.cgi?id=732203
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Improve parser state tracking by introducing new flags reflecting
it: "got-sps", "got-pps" and "got-slice". This is an addition for
robustness purposes.
Older have_sps and have_pps variables are kept because they have
a different meaning. i.e. they are used for deciding on when to
submit updated caps or not, and rather mean "have new SPS/PPS to
be submitted?"
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Use gst_h264_parser_identify_nalu_unchecked() to identify the next
NAL unit. We don't want to parse the full NAL unit, but only the
header bytes and possibly the first RBSP byte for identifying the
first_mb_in_slice syntax element.
Also fix check for failure when returning from that function. The
only success condition for that is GST_H264_PARSER_OK, so use it.
https://bugzilla.gnome.org/show_bug.cgi?id=732154
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
The gst_h264_parse_pps() function dynamically allocates the slice
group ids map array, so that needs to be cleared before parsing a
new PPS NAL unit again, or when it is no longer needed.
Likewise, a clean copy to the internal NAL parser state needs to be
performed so that to avoid a double-free corruption.
https://bugzilla.gnome.org/show_bug.cgi?id=707282
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
The recovery point SEI message helps a decoder in determining if the
decoding process would produce acceptable pictures for display after
the decoder initiates random access or after the encoder indicates
a broken link in the coded video sequence.
This is not used in the h264parse element, but it could help debugging.
https://bugzilla.gnome.org/show_bug.cgi?id=723380
In ISO/IEC 14496-15, the minimum size of a HEVCDecoderConfigurationRecord
(i.e., the contents of a hvcC box) is 23 bytes. However, the code in h265parse
checks that the size of this data is not less than 28 bytes, and it refuses to
accept caps if the check fails. The result is that standards-conformant streams
that don't carry any parameter sets in their hvcC boxes won't play.
https://bugzilla.gnome.org//show_bug.cgi?id=731783
Presence of picture extension header identifies the stream as mpeg2.
We are supposed to set the mpegversion to 2 if there is a picextension
instead of blindly setting the version to 1
https://bugzilla.gnome.org/show_bug.cgi?id=726028
It is not perfect but it allows us to be sure that the mandatory 'framerate'
field is present in the caps.
As soon as some information is found in the stream, that will be
updated.
https://bugzilla.gnome.org/show_bug.cgi?id=723243
An SEI RBSP could contains more than one SEI message as specified in
7.4.2.3.1.
This commit change the parser API: the gst_h264_parser_parse_sei()
function now create and fill a GArray containing GstH264SEIMessage.
https://bugzilla.gnome.org/show_bug.cgi?id=721715
mpeg4videoparse might not push buffers while parsing. If those buffers
contain the DISCONT flag, it gets lost and downstream won't get any
buffer with the flag.
Fix it by adding the DISCONT to the next pushed buffer.
This makes backwards playback work.
Conversion to byte-stream/nal crashes without that because the
baseparse frame of all NALUs is finished for the first NALU, then
used again for parsing the second NALU. Just that now the buffer
of the frame is already gone. Instead we create temporary frames
for every NALU.
In case more data than a start code alone is needed to decide whether
it ends a frame, arrange for more input data and decide when available.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=711627
When the input buffer is empty and we need more data to determine
whether or not to terminate the previous frame, the last start code
location needs to be set to 4 bytes before the the current position
(size of start_code is 32-bits)
https://bugzilla.gnome.org/show_bug.cgi?id=711627
