This mirrors the behaviour in vp8enc / vp9enc and is generally more
useful than using any framerate from the caps as it provides some degree
of accuracy if the stream doesn't have timestamps perfectly according to
the framerate.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6891>
The encoder can specify the a preferred_output_delay value to get better throughput
performance. The higher delay may get better HW performance, but it may increases
the encoder and pipeline latency.
When the output queue length is smaller than preferred_output_delay, the encoder
will not block to waiting for the encoding output. It will continue to prepare and
send more commands to GPU, which may improve the encoder throughput performance.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4359>
If the muxer times out because of the latency deadline it can happen
that some pads have no caps yet. In that case skip creation of streams
for these pads and create updated section tables once the first buffer
arrives later.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6823>
This makes sure that for sparse streams (KLV, DVB subtitles, ...) the
muxer does not wait until the next buffer is available for them but
times out on the latency deadline and outputs data.
For non-live pipelines it will still be necessary for upstream to
correctly produce gap events for sparse streams.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6823>
The FORCE_KEYFRAME frame which has GST_VIDEO_CODEC_FRAME_FLAG_FORCE_KEYFRAME
bit set should be the sync point. So we should let it be an IDR frame to begin
a new GOP, rather than just promote it to an I frame.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6619>
The FORCE_KEYFRAME frame which has GST_VIDEO_CODEC_FRAME_FLAG_FORCE_KEYFRAME
bit set should be the sync point. So we should let it be an IDR frame to begin
a new GOP, rather than just promote it to an I frame.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6619>
Set the P and B frame qp to I frame value to avoid generating delta
QP between different frame types. For ICQ and QVBR modes, we can
only set the qpi value, so the qpp and qpb values should be set to
the same value as the qpi.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6841>
Address below message reported by SDK debug layer.
ID3D12Device::CheckFeatureSupport: Unsupported Decode Profile Specified.
Use ID3D12VideoDevice::CheckFeatureSupport with D3D12_FEATURE_VIDEO_DECODE_PROFILES
to retrieve a list of supported profiles
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6839>
Certain V4L2 fourccs don't (yet) have DRM counter parts, in which case
we can't create DMA_DRM caps for them. This is usually the case for
specific tilings, which are represented as modifiers for DMA formats.
While using these tilings is generally preferable - because of e.g.
lower memory usage - it can result in additional conversion steps when
interacting with DMA based APIs such as GL, Vulkan or KMS. In such cases
using a DMA compatible format usually ends up being the better option.
Before the addition of DMA_DRM caps, this was what playbin3 ended up
requesting in various cases - e.g. prefering NV12 over NV12_4L4 - but
the addition of DMA_DRM caps seems to confuse the selection logic.
As a simple and quite robust solution, assume that peers supporting
DMA_DRM caps always prefer these and reorder the caps accordingly.
In the future we plan to have a translation layer for cases where
there is a matching fourcc+modifier pair for a V4L2 fourcc, ensuring
optimal results.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6645>
Doing it in gst_play_new() means that bindings that directly call
g_object_new() with the GType wouldn't end up initializing both.
This affects at least the Python and GJS bindings.
gst_init() is nonetheless only called from gst_play_new() once because
calling it from class_init would likely lead to problems as that's
called from somewhere in the middle of GObject.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6801>
Don't add an extra ref if non-floating as that ref will never be
unreffed.
gst_bin_add() is transfer floating (alias to transfer none).
Fixes a leak when a non-floating ref was provided as a return value in
the request-aux-sender signal.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6807>
Use of VK_PIPELINE_STAGE_2_ALL_COMMANDS_BIT instead of
specific VK_PIPELINE_STAGE_2_VIDEO_DECODE_BIT_KHR
Fix for VUID-vkCmdPipelineBarrier2-srcStageMask-03849
pDependencyInfo->pImageMemoryBarriers[0].srcStageMask
(VK_PIPELINE_STAGE_2_VIDEO_DECODE_BIT_KHR) is not compatible with
the queue family properties
(VK_QUEUE_GRAPHICS_BIT|VK_QUEUE_COMPUTE_BIT|VK_QUEUE_TRANSFER_BIT|
VK_QUEUE_SPARSE_BINDING_BIT|VK_QUEUE_PROTECTED_BIT) of this
command buffer. The Vulkan spec states: The srcStageMask member
of any element of the pMemoryBarriers, pBufferMemoryBarriers, or
pImageMemoryBarriers members of pDependencyInfo must only
include pipeline stages valid for the queue family that was
used to create the command pool that commandBuffer was allocated
from (
https://www.khronos.org/registry/vulkan/specs/1.3-extensions/
html/vkspec.html#VUID-vkCmdPipelineBarrier2-srcStageMask-03849)
The frame barrier should use a compatible srcStageMask for all
the queues.
Remove reset_pipeline_stage_mask as it is redundant
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6780>
Add pitch tests with different forward and backward playback rates.
Those tests depend on the libSoundTouch version to validate the buffers
checksums. The actual version uses libSoundTouch 2.3.2, use the
`--force-fallback-for=soundtouch` meson option to build using the same
version.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6247>
- fully protect accesses to the libsoundtouch API that is not
thread-safe.
- fully protect accesses to GstPitch members that could be read by a
downstream query thread while written by an upstream streaming thread
or a user thread.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6247>
- use the `GST_PITCH_GET_PRIVATE` accessor when needed
- rename `out_seg_rate` to `output_rate` to use the same name as the parameter
- rename `seg_arate` to `segment_applied_rate` to improve readability
- apply gst-indent to gstpitch.hh/cc
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6247>
When changing playing rate, the output segment was not correctly
calculated because the stream time ratio was computed using the previous
input segment rate instead of using the actual rate. This was producing
wrong results for the output segment start and end values.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6247>
The h26xdecoder 'stop' method was not called
as the vulkan h26x class rewires the video decoder
'stop' base method to its own one.
It was causing some memory leaks such as dangling parser
and dpb in h26xdecoder base class.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6782>
1. The PTS of all frames should not be changed.
2. Just update the DTS based on the PTS. For the frame which is not
reordered, the DTS is equal to PTS. For frame which is reordered,
the DTS is equal to previous DTS. For example:
Input: F0[D0, P0] -- F1[D1, P1] -- F2[D2, P2] -- F3[D3, P3]
Output: F0[I, D0, P0] -- F3[P, D0, P3] -- F1[B, D1, P1] -- F2[B, D2, P2]
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6703>
1. The PTS of all frames should not be changed.
2. Just update the DTS based on the PTS. For the frame which is not
reordered, the DTS is equal to PTS. For frame which is reordered,
the DTS is equal to previous DTS. For example:
Input: F0[D0, P0] -- F1[D1, P1] -- F2[D2, P2] -- F3[D3, P3]
Output: F0[I, D0, P0] -- F3[P, D0, P3] -- F1[B, D1, P1] -- F2[B, D2, P2]
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6703>
Fixing deadlock in below case
* GC lock is taken by background thread, and the background thread calls
gst_d3d12_ipc_client_release_imported_data() which takes ipc lock
* ipc lock is already taken in ipc thread and trying to pushing GC data
via gst_d3d12_command_queue_set_notify()
* gst_d3d12_command_queue_set_notify() is trying to take GC lock
but it's already taken by background thread
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6749>
Ideally, GPU waiting should be scheduled just before executing command list.
But handling the case outside of converter is a bit complicated.
Under an assumption that constructed command list will be executed
immediately, schedules GPU-side waiting inside of conversion method
to simplify the flow.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6749>
Since we don't want to expose video decoding API outside of GStreamer, the
header is removed from installation and both source files are renamed as
-private.
The header must remain in gst-libs because is referred by GstVulkanQueue,
which's the decoder factory.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6723>
First it derived mapping was disabled for P010 formats, but also there's an
issue with interlaced frames.
It would be possible to disable derived mapping only for interlaced (H.264
decoder and vadeinterlace) but it would spread the hacks along the code. It's
simpler and contained to disable derived completely for Mesa <23.3
Fixes: #3450
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6729>
Instead of duplicating the GStreamer format to DRM fourcc mapping, this patch
uses the GstVideo library helpers. This duplicates the big O of looking for,
since the two lists are traversed, but it's less error prone.
Partially reverts commit 547f3e8622.
Fixes: #3354
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6731>
If waylandsink received buffer rate is high which causes frame
drop, the cached staged buffer will be replaced when next buffer
needs to be rendered and be freed after redraw. But there is
chance to get memory leak if ended without redraw. So need to
free staged buffer when do gst_wl_window_finalize().
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6670>
`rsvg_handle_get_dimensions()` and `rsvg_handle_render_cairo()` are
deprecated, and the replacement librsvg functions as specified in the
migration guide are `rsvg_handle_get_intrinsic_size_in_pixels()` and
`rsvg_handle_render_document()`.
However, those are not drop-in replacements, and actually have
breaking semantics for our use-case:
1. `intrinsic_size_in_pixels()` requires SVGs to have width+height or
the viewBox attribute, but `get_dimensions()` does not. It will
calculate the geometry based on element extents recursively.
2. `render_cairo()` simply renders the SVG at its intrinsic size on
the specified surface starting at the top-left, maintaining
whatever transformations have been applied to the cairo surface,
including distorted aspect ratio.
However, `render_document()` does not do that, it is specifically
for rendering at the specified aspect ratio inside the specified
viewport, and if you specify a viewPort that does not match the
aspect ratio of the SVG, librsvg will center it.
Matching the old behaviour with the new APIs is a lot of work for no
benefit. We'd be duplicating code that is already there in librsvg in
one case and undoing work that librsvg is doing in the other case.
The aspect ratio handling in this element is also kinda atrocious.
There is no option to scale the SVG while maintaining the aspect
ratio. Overall, element needs a rewrite.
Let's just disable deprecations. The API is not going anywhere.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6726>
There was an issue with this equality check, which was to figure out what to do
with PCR pids (whether they were part of the streams present or not) and whether
we ignore PCR or not.
Turns out ... we already took care of that further up in the function.
The length check can be simplified by just checking whether the length of
the *original* PMT and the new PMT are identical. Since we don't store "magic"
PCR streams in those, we can just use them as-is.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6713>
A DPB buffer held by codec picture object may not be writable
at the moment, then gst_buffer_make_writable() will unref passed buffer.
Specifically, the use after free or double free can happen if:
* Crop meta of buffer copy is required because of non-zero
top-left crop position
* zero-copy is possible with crop meta
* A picture was duplicated, interlaced h264 stream for example
Interlaced h264 stream with non-zero top-left crop position
is not very common but it's possible configuration in theory.
Thus gst_buffer_make_writable() should be called with
GstVideoCodecFrame.output_buffer directly.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6706>
A DPB buffer held by codec picture object may not be writable
at the moment, then gst_buffer_make_writable() will unref passed buffer.
Specifically, the use after free or double free can happen if:
* Crop meta of buffer copy is required because of non-zero
top-left crop position
* zero-copy is possible with crop meta
* A picture was duplicated, interlaced h264 stream for example
Interlaced h264 stream with non-zero top-left crop position
is not very common but it's possible configuration in theory.
Thus gst_buffer_make_writable() should be called with
GstVideoCodecFrame.output_buffer directly.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6706>
The goal of this code was, for programs which were updates (i.e. adding/removing
streams but not completely changing) to allow dynamic addition/removal of
streams without completely removing everything.
But this wasn't 100% tested and there are a bunch of issues which make it fail
in plenty of ways.
For now disable that feature and force the legacy "add all pads again and then
remove old ones" behaviour to make it switch.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6651>
In addition to device removed status monitoring in gst_d3d11_result()
method, if ID3D11Device4 interface is available,
an event handle will be used for device removed status update.
And "device-removed" signal is removed since applications can monitor
the device removed status via gobject notify
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6699>
Adding new property in order to notify users of device removed status.
Once device removed status is detected, application should release
all ID3D12Device objects corresponding to the adapter, including
GstD3D12Device object. Otherwise D3D12CreateDevice() call for the
adapter will fail.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6699>
It seems that when D3D11CreateDevice collides in time
with other D3D11 calls, in particular the proccess of
creating a shader, it can corrupt the memory in the driver.
D3D11 spec doesn't seem to require any thread safety from
D3D11CreateDevice. Following MSDN, it is supposed to be called
in the beginning of the proccess, while GStreamer calls it with each
new pipeline.
Such crashes in the driver were frequently reproducing on the
Intel UHD 630 machine.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6686>
We suspect that it's not thread safe to just create and
destroy the device from any thread, particularly because
of D3D11CreateDevice, that is not documented as thread-safe.
While D3D11CreateDevice is usually protected from outside
by the gst_d3d11_ensure_element_data, it still can cross
with the Release() method of another device.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6686>
If propose_allocation comes before set_caps, self->video_info
has not been extracted from caps and self->video_info.size is 0.
It causes buffer pool fail to set config . So need to use info
size got from query instead when propose_allocation.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6666>
The caps obtained from parsing the allocation query is borrowed and
should not be unreffed. This fixes criticals assertion introduced in
1.24.1.
(gst-launch-1.0:242): GStreamer-CRITICAL **: 19:48:02.667:
gst_mini_object_unref: assertion 'GST_MINI_OBJECT_REFCOUNT_VALUE (mini_object) > 0' failed
Fixes: 5189e8b956 ("v4l2codecs: decoders: Add DMA_DRM caps support")
Closes#3462
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6679>
../subprojects/gst-plugins-bad/tests/check/libs/gstlibscpp.cc:41:
fatal error: gst/mpegts/gstmpegts-enumtypes.h: No such file or directory
Could only pass the needed deps to the libscpp test, but gets
messier to maintain, so let's at it for consistency.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6643>
When using v2.0.2 of the subproject, it triggers werror for
unused functions that come from the fdkaac headers.
This avoids errors like the following when werror is set.
```
subprojects/fdk-aac-2.0.2/fdk-aac/FDK_audio.h:757:29: error: ‘FDKlibInfo_lookup’
defined but not used [-Werror=unused-function]
757 | static FDK_AUDIO_INLINE INT FDKlibInfo_lookup(const LIB_INFO* info,
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6611>
Fix
gstanalyticsmeta.c:134: Warning: GstAnalytics: "@instance"
parameter unexpected at this location
warning (caused by the extraneous empty line in the doc chunk)
and align function arguments with documentation and header file
(handle -> instance).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6585>
For some cameras `gst_jpeg_parse_app0()` fails on a invalid segment.
While this is likely a driver or firmware bug that should be addressed
accordingly, it's not fatal and likely does not deserve a bus message on
every frame, flooding journals.
Turn down the volume of the warnings by turning them into object
warnings. If we conclude that in some cases we'd still want bus
warnings, they can be done more fine-grained in the
`gst_jpeg_parse_appX()` functions.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6490>
GstD3D12Device objetct's internal resources are singletons per adapter
already though, the object itself is not a singleton.
Due to the singleton design (unlike other APIs such as d3d11),
d3d12 device context sharing is not a strict requirement
for zero-copy, but handles context ones to make things less noisy.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6513>
Adding RGBA, RGBx, BGRA, BGRx, VUYA and RGB10A2_LE format support for performance.
However, these formats are not still recommended if upstream can support
native YUV formats (e.g., NV12, P010) since NVENC does not expose
conversion related optiones. Note that VUYA format is 4:4:4 YUV format
already but NVENC runtime will convert it to 4:2:0 format internally
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6417>
If parameters remain similar enough to avoid either encoder reopening
or downstream renegotiation, avoid it.
This is going to be useful for dynamic parameters setting.
To check if the stream parameters changed, so the internal encoder has
to be closed and opened again, are required two steps:
1. If input caps, format, profile, chroma or rate control mode have changed.
2. If any of the calculated variables and element properties have changed.
Later on, only if the output caps also changed, the pipeline
is renegotiated.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6441>
If parameters remain similar enough to avoid either encoder reopening
or downstream renegotiation, avoid it.
This is going to be useful for dynamic parameters setting.
To check if the stream parameters changed, so the internal encoder has
to be closed and opened again, are required two steps:
1. If input caps, format, profile, chroma or rate control mode have changed.
2. If any of the calculated variables and element properties have changed.
Later on, only if the output caps also changed, the pipeline
is renegotiated.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6441>
The last frame which has the smallest diff should be consider as
the first choice rather than the golden frame. Especially when only
one reference available, this way can improve the BD rate about 5
percentage.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6379>
Some extreme case such as "videotestsrc pattern=1" can generate pure
white noise videoes, for which encoder may generate too big output
for current coded buffer size. We now consider the qindex and bitrate
to avoid that.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6483>
It might happen that the key event arrives when the d3d11videosink
is stopping. In case of GstD3D11WindowWin32 it can raise a
navigation event even when the sink is already freed, because the
window object's refcount may reach 0 in the window thread. In
other words sometimes the GstD3D11WindowWin32 lives few ms more
then the GstD3D11VideoSink, because it's freed asynchronously.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6476>
In the case of multi-channels transcoding, a context with child
sesseion can be parent for others, so we need to check if the
msdkcontext has any child session in the list to avoid session
leaks. Otherwise, we will see the failure of closing a parent
session because one of its child's child session not released.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6259>
Calling gst_pad_peer_query_caps() without a filter can give us EMPTY caps, whereas all the code below
assumes that's not the case. Replacing query+intersect with a filtered query ensures we always get a subset
of the template caps back.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6429>
There was a potential busy loop occuring because when we were taking
data from the internal ccbuffer, we were not resetting which field had
written data. This would mean that the next time data was retrieved
from ccbuffer, it was always from field 0 and never from field 1.
This only affects usage of cc_buffer_take_separated() which is only used
by cdp->raw cea608.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6423>
In an early non-linked scenario, this was causing a ton of criticals about the queue array,
because the output callback would still fire for leftover frames that were still being processed by VT
at the time the output loop stopped. This makes sure they're flushed correctly as well.
Also renames gst_vtdec_loop to gst_vtdec_output_loop for consistency with related functions.
wip
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6397>
Sometimes a call to negotiate (and thus drain) can happen from the output loop
(via finish_frame()), which will tell VT to output all internal frames, but that won't succeed
if we happen to decide to wait for the queue to empty (because the loop is waiting for draining to finish and
will not make space in the queue!). This commit adds an override for the queue size limit if we're draining/flushing.
This bug could happen for any formats, but was especially obvious for ProRes, which has dpb_size of 0.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6397>
Because ID3D12Device objects are singletons per adapter,
GstD3D12Device was following the API design, that is, keep track
of global GstD3D12Device objects and reuses it.
That means ID3D12Device object can be released at the time
when GstD3D12Device is destroyed.
But exetrnal APIs such as NVENC does not seem to be happy
with the released ID3D12Device, that could be a driver bug though.
Let's hold already opened ID3D12Device permanently without releasing
it for now.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6395>
`on_error()` can be called with a NULL details structure, so in that situation
the `gst_structure_copy()` would raise a critical warning. Create an empty
structure instead of attempting to copy a NULL one.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6385>
In order to simplify caps negotiations for clients and, notably, be more
compatible with va* decoders.
Crucially this allows clients to know ahead of time whether buffers will
actually be DMABufs.
Similar to GstVaBaseDec we only announce system memory caps if the peer
has ANY caps. Further more, and again like va decoders, we fail in
`decide_allocation()` if DMA_DRM caps are used without VideoMeta.
Apart from buggy peers this can happen e.g. when a peer with ANY caps
is used in combination with caps filters.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5890>
Most importantly rely on video info helpers instead of manual parsing
of caps, which will allow us to use additional helpers in the future.
While on it, tighen the check for supported formats - failing that
indicates a bug in caps negotiation - and make some style changes.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5890>
This ensures we don't create filter caps that are not supported by the
individual codec implementations, as well as that the resulting caps
have the required fields so they can be turned into a GstVideoFormat.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5890>
When this error gets caught the GstD3D11Device object raises the new
"device-removed" signal. This allows to handle the error from outside:
stop the playback, re-create the player, replace the catched GstContext by
the new one.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6193>
Do not chain up to parent's GstBufferPool::start() which will do
preallocation. We don't want it to be preallocated
since there are various cases where negotiated downstream buffer pool is
not used at all (e.g., zero-copy decoding, IPC elements).
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6326>
This fixes a crash in `gst_va_h264_enc_class_init` and `gst_va_h265_enc_class_init`
(and probably also in gst_va_av1_enc_class_init) when calling
`g_object_class_install_properties (object_class, n_props, properties);`
When rate_control_type is 0, the following code is executed in :
```
} else {
n_props--;
properties[PROP_RATE_CONTROL] = NULL;
}
```
n_props has initially a value of N_PROPERTIES but PROP_RATE_CONTROL
is not the last element in the array, so it's making
g_object_class_install_properties fail to iterate over the
properties array.
This applies the same fix to gstvah264enc.c, gstvah265enc.c and
gstvaav1enc.c.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6319>
osxaudio has a few helper methods potentially useful in atdec (or future atenc), like GStreamer -> CoreAudio
channel mapping. Doesn't make sense to duplicate them in applemedia, and atdec is the only audio-oriented
element there anyway.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6223>
Cea608 (valid) padding removal is available on the input side of ccconverter
or configurable on cccombiner. cccombiner can now configure whether
valid or invalid cea608 padding is used and for valid padding, how long
after valid non-padding to keep sending valid padding.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6300>
The transport stream only returned the CAPS for the first matching PT entry
from the `ptmap`. Other SSRC with the same PT where not included. For a stream
which bundled multiple audio streams for instance, only the first SSRC was
knowed to the SSRC demux and downstream elements.
This commit adds all the `ssrc-` attributes from the matching PT entries.
The RTP jitter buffer can now find the CNAME corresponding its SSRC even if it
was not the first to be registered for a particular PT.
The RTP PT demux removes `ssrc-*` attributes cooresponding to other SSRCs
before pushing SSRC specific CAPS to downstream elements.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6119>
In the situation where playback starts from a keyframe before
the target playback segment, then the first buffers will be
outside the configured segment and gst_segment_to_stream_time()
will return GST_CLOCK_TIME_NONE unconditionally.
If drop-out-of-segment is false, the RTP buffers will not be
dropped, but will be sent witout ONVIF extension timestamps
and given GST_CLOCK_TIME_NONE timestamps on the receiver.
Instead, use gst_segment_to_stream_time_full() to extrapolate
stream time outside the segment so that such buffers still
get assigned their correct timestamps on the receiver.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6248>
Don't accidentally include the stuffing byte (if present)
into the bottom field size. It should only be included in the
total segment length.
Fixes problems with FFmpeg not rendering the subtitles
with a stuffing byte, giving a "Invalid object location!" error.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6250>
Provide a clock from the source that is a monotonic system clock with
the rate corrected based on the measured and ideal capture rate of the
frames.
If this clock is selected as pipeline clock, then provide perfect
timestamps to downstream.
Otherwise, if the pipeline clock is the monotonic system clock, use the
internal clock for converting back to the monotonic system clock.
Otherwise, use the monotonic system clock time calculated in the above
case and convert that to the pipeline clock.
In all cases this will give a smoother time than the previous code,
which simply took the difference between the driver provided capture
time and the current real-time clock time, and applied that to the
current pipeline clock time.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6208>
Otherwise there's a small window between querying the state and doing
the transfer in which a frame could be dropped, and we would then output
the frame right after the dropped one as if it was the dropped frame.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6208>
In low delay B mode, the P frame is converted as B frame with forward
references. For example, One P frame may refers to P-1, P-2 and P-3 in
list0 and refers to P-3, P-2 and P-1 in list1.
So the num in list0 and list1 does not reflect the forward_num and
backward_num. The vaapi does not provide ref num for forward or backward
so far. In this case, we just consider the backward_num to be 1 conservatively.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6249>
In b_pyramid mode, B frames can be ref and prevPicOrderCntLsb can
be the B frame POC which is smaller than the P frame. This can cause
POC diff bigger than MaxPicOrderCntLsb/2 and generate wrong POC value.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6249>
Gets being released memory back to queue even if allocator is flushing
in order to count the number of outstanding memory objects.
Also, clear queue if there's no outstanding memory object and
allocator is flushing
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6240>
Syncrhonizing buffer commits to the streaming thread can lead to
dropped frames when frame callbacks are not processed before the
next frame is ready for rendering. Depending on the drift between
the wayland compositor and buffer source timings, this can lead to
periods of significant frame drop, especially when the media frame
rate is close to the display frame rate.
Cache buffers in the streaming thread and peform commits on the
display thread to eliminate the buffer commit racing.
The implementation is the same for both waylandsink and gtkwaylandsink,
so move it to the common wayland library under gst-lib.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6133>
Add synchonized versions of wl_display_sync() and wl_callback_destroy()
that will ensure that to callbacks can be managed in a thread safe way
on the display queue even when they are dispatched from a separate
thread.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6133>
Unprepare method posts WM_GST_D3D11_DESTROY_INTERNAL_WINDOW
command to the window queue, and from that moment considers
internal_hwnd to be released, and so it sets it to null.
The problem is that it's possible that right at that moment
the window thread might be already processing some other
command, or just another command might be already in the queue.
On practice we met a crash when WM_PAINT got processed in between
(unprepare already finished and WM_GST_D3D11_DESTROY_INTERNAL_WINDOW
was not handled yet)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6187>
When the conversion is only caps feature from memory:VAMemory to system memory,
it's possible to optimize by doing a pseudo pass-through since the va-backed
buffers are the same for system memory buffers.
This change will also mitigates #2940
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6174>
If the allocation query received from downstream doesn't handle GstVideoMeta but
it requests memory:DMABuf caps feature, it's incomplete, so we rather reject the
negotiation.
Both in base decoder, base transform and compositor.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6155>
This is a simplification of the venerable
gst_va_base_dec_get_preferred_format_and_caps_features() function, which
predates since gstreamer-vaapi. It's used to select the format and the
capsfeature to use when setting the output state. It was complex and hard to
follow. This refactor simplifies a lot the algorithm.
The first thing to remove _downstream_has_video_meta() since, most of the time
it will be called before the caps negotiation, and allocation queries make sense
only after caps negotiation. It might work during renegotiation but, in that
case, caps feature change is uncommon. Better a simple and common approach.
Also, for performance, instead of dealing with caps features as strings, GQuarks
are used.
The refactor works like this:
1. If peer pad returns any caps, the returned caps feature is system memory and
looks for a proper format in the allowed caps.
2. The allowed caps are traversed at most 3 times: one per each valid caps
feature. First VAMemory, later DMABuf, and last system memory. The first to
match in allowed caps is picked, and the first format matching with the
chroma is picked too.
Notice that, right now, using playbin videoconvert never return any.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6154>
Some subtitle "decoders" had a wrong category of "Parser", which `parsebin`
relies on to identify elements which do not *decode* streams but *parse* them.
This would cause such subtitle decoders to be plugged in within parsebin,
preventing the original stream to be properly used by (more efficient)
downstream decoders or subtitle renderers.
Fixes#1757
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6153>
This inherits from the same rule as gst_buffer_add_meta
```
gst-mpegtspesmetadatameta.h:98: Warning: GstMpegts:
gst_buffer_add_mpegts_pes_metadata_meta: return value: Invalid non-constant
return of bare structure or union; register as boxed type or (skip)
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6146>
This reverts questionable commit 009bc15f33
which looks completely wrong.
The GstWasapi2RingBuffer:buffer_size variable is used to
calculate available buffer size we can write
(i.e., available size = buffer_size - padding_size).
But the commit makes the size to be exactly same as buffer period.
Then, it can confuse this element as if the endpoint buffer is full on
I/O event callback (if padding size is equal to buffer period)
but it's not true.
Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/2870
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6132>
- Add the missing field parameter and put the output parameter at the
end.
- Use a switch to verify valid values instead of hard-to-follow range
checks.
- Don't consider bad values a programming error, just a regular failure.
- Set all data fields at the end so we can pass a pointer to an
uninitialized structure without GCC complaining.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5450>
The global semaphore was never closed/unlinked, causing permission
denied issue if the device is later used by another user. Properly
removing the semaphore when stopping the pipeline would still leave it
open in case of a crash.
With a GStreamer specific name, it was also not preventing other apps to access
the device concurrently.
Finally, if the system has multiple cards, the lock should be per card
and not global (to be confirmed).
Fixes: #3283.
Sponsored-by: Netflix Inc.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6117>
MaxDpbSize specified in A.4.2 tells upper bound of decoded picture
buffer size but does not tell actual required size.
Use max_dec_pic_buffering value as a dpb size. Some backends
such as DXVA and NVDEC might require pre-allocated DPB buffer
and unnecessary large DPB size will result in waste of GPU memory.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6101>
In rtpbin we already systematically check for all property names
except latency, correct that.
In webrtcbin we need to check before trying to use the do-retransmission
property.
This is useful for the case where an element like identity gets passed
to rtpbin's request-jitterbuffer property, when the application wants
to use webrtcbin in an SFU situation, with no reordering and no added
latency
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6112>
According to recommendation from MS, IDXGIOutputDuplication::ReleaseFrame()
needs to be called just before IDXGIOutputDuplication::AcquireNextFrame()
for performance reasons, so that driver can accumulate dirty rects
and update texture at once. But it seems to cause choppy output.
Do release acquired frame immediately once processing done,
like d3d11 implementation does.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6092>
* Bump the rank of the musepack v7/v8 FFmpeg demuxers to SECONDARY
* Bump the rank of the musepack v7/v8 FFmpeg audio decoders to SECONDARY
* Demote the rank of the musepackdec element to MARGINAL
This is for two reasons:
* The musepack library is no longer maintained, whereas the FFmpeg
implementation can/will receive fixes
* The `musepackdec` implementation was a all-in-one "parsing and decoding" blob
which doesn't play nicely with decodebin3 and others
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/3033
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6074>
Sends a gap event if nothing to output for a given input buffer.
For example, an input buffer might not contain any caption data
for downstream requested field, then we need to inform downstream
of the case.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6073>
WebKit commit b12e7ed2ad3a ("[WPE] Upstream the new WPE platform API
https://bugs.webkit.org/show_bug.cgi?id=265286")[1] added a `WPEView` typedef
which clashes with our `WPEView` class.
Rename the `WPEView` class to `GstWPEThreadedView` to avoid the collision.
Also prefix the `WPEContextThread` class with `Gst` and rename the
source files to reflect the new class name and use lowercase while at it
for consistency
[1] b12e7ed2ad
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6065>
Previously, the path lock was held even while issuing caps queries to
other elements. This can lead to deadlocks in more complex pipelines.
Avoid this by reworking gst_switch_bin_get_allowed_caps() to acquire
references to switchbin paths and then releasing the path lock.
Subsequent operations in that function then act on the acquired
references, thus eliminating the need for holding the path lock for
the entirety of that function.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4632>
The caps query specifies _all_ caps that the element can handle, not just
caps from the current path element. If for example a switchbin has two
paths, with one having an element that handles video/x-h264, and another
path whose element handles video/x-raw, and the second path is the
current path, then the existing code would report only video/x-raw as
supported. Fix this by report all allowed caps, even if there is a
current path defined.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4632>
The rationale is that a passthrough path (= one with no element) behaves
as if the switchbin's sink- and srcpad were one. In particular, internal
caps queries (needed for computing the allowed caps) then go to the peers
instead to path elements. Rework gst_switch_bin_get_allowed_caps () for
a clear handling of NULL path elements and for proper dataflow passthrough
and caps & accept-caps query handling.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4632>
The drop probe was present in early switchbin versions to implement paths
that drop dataflow. However, this feature turned out to be too problematic
and thus was removed. Some bits remained though. This commit removes those
bits and clarifies that in the current switchbin version, a NULL path
element instead means passthrough.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4632>
If the current segment has a configured stop point, detect
when when pad timestamps proceed past that point and mark
them as EOS. Otherwise, tsdemux continues streaming
the whole input downstream (unless something downstream detects
and returns EOS for us)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6023>
Use string parsing instead of pointer arithmetic, which makes the code
easier to understand and less error-prone. This has no functional
changes, and is preparation for the next commit, which extends the
header parsing.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5997>
Fence data could hold GstD3D12Device directly or indirectly.
Then if it's holding last refcount, the device object will
be released from the device object's internal thread,
and will try join self thread.
Delegates it to other global background thread to avoid
self thread joining.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6042>
The libwebp API doesn't match very well with the GstVideoEncoder
API, as it only delivers an unframed bitstream once all pictures
have been processed, which means we can only push a single buffer
manually on our srcpad on finish().
Supporting animated webp is still valuable, and the feature is
behind an opt-in property.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5994>
- gst_analytics_cls_mtd_get_length() return a gsize, this type dicated index
type for gst_analytics_cls_mtd_get_quark() and
gst_analytics_cls_mtd_get_level().
- Minor cleanup/improvement on index validation.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6018>
videoconvertscale advertises `ANY` feature, but it supports it only
in passthrough. Our goal with autoconvert is to ensure that conversion
is possible with the elements that are being plugged so we avoid
plugging `videoconvertscale` if the memory type is not system memory.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/899>
Instead of letting all the elements that were added into the bin,
add them only when strictly needed and removed them when we stop using
them.
With previous refactoring we are keeping them in our own hashmap in
amy case so we can keep reusing the same elements as before.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/899>
We used to conside elements that were subclassses of another
element type as being the same (for example with videoconvertscale,
bother videoconvert and videoscale are subclasses of videoconvertscale
and that code was lost)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/899>
The output of VP9 and AV1 encoder is a little different from the H264
and H265 encoder, it may contain repeat frames and so the output frame
number may be more than the input. We need to call finish_subframe()
when some frame will be repeated later. So we need to extend the
current prepare_output() virtual function.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3015>
A client may map dmabufs without the intention to either read or write
to the memory. One example is clients wanting to use the
`gst_video_frame_map()` helper function.
Thus, in order to make buffers from `GstVaDmabufAllocator` conveniently
usable, ignore the modifier check if the client specified neither
`GST_MAP_READ` nor `GST_MAP_WRITE`.
Also skip the `va_sync_surface()` call in that case, as it's likely only
needed for CPU reads/writes.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5965>
clang does not like the array index assignment without the `=` sign in
it. This is a gnu extension I believe, and adding the sign is proper.
This fixes the following two warnings:
```
../subprojects/gst-plugins-bad/gst-libs/gst/vulkan/gstvkvideo-private.c:32:40:
warning: use of GNU 'missing =' extension in designator [-Wgnu-designator]
[GST_VK_VIDEO_EXTENSION_DECODE_H264] {
^
=
../subprojects/gst-plugins-bad/gst-libs/gst/vulkan/gstvkvideo-private.c:36:40:
warning: use of GNU 'missing =' extension in designator [-Wgnu-designator]
[GST_VK_VIDEO_EXTENSION_DECODE_H265] {
^
=
```
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5996>
Remove optional sprop-stereo and sprop-maxcapture fields from Opus
remote offer caps before intersecting with local codec preferences.
According to https://datatracker.ietf.org/doc/html/rfc7587#section-7.1
those fields are sender-only informative, and don't affect
interoperability.
Fixes cases where the webrtc media will end up receive-only if the
local side wants to send stereo but the remote is sending mono, or
vice versa.
There may be other fields in other codecs, so the implementation
anticipates needing to add further fields and codecs in the future.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5993>
Post a bus message explaining that input buffers must
have timestamps and return GST_FLOW_ERROR, instead of
a confusing NOT-NEGOTIATED
Also remove an errant buffer unref in the error handling
that would lead to crashes after.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5935>
Add a finalize method and release locks and things in there, instead
of in the dispose method. Dispose may be called multiple times,
at any time, and should just safely release references to other
memory that might reference it back.
In this case, timecodestamper would later crash in the element
dispose method trying to take the freed mutex from
gst_timecodestamper_release_pad().
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5935>
This protocol does what it says on the box, avoiding the need for a 1x1
wl_shm buffer.
A wayland-projects wrap has been added for users who do not have v1.26
available.
This commit was partly authored by Robert Mader.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2662>
Explicitly calls gst_vtenc_pause_output_loop when going PAUSED->READY to make sure GST_PAD_STREAM_LOCK is not taken.
Before this change, a deadlock would occur if pipeline got stopped right after one output buffer was generated by vtenc.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5933>
Modify the fix_output_format in vpp to directly generate caps with
negotiated src caps, and we have the correct dma caps negotiation in
fix_output_format function. And thus, we can remove the redundant
negotiation of using function pad_accept_memory in vpp.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5845>
The pool currently defaults to performing a layout transition to
VK_IMAGE_LAYOUT_TRANSFER_DST_OPTIMAL, with some special exceptions for
video usages. This may not be a legal transition depending on the usage.
Provide an API to explicitly control the initial image layout.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5881>
When implementing NDK media support, it would be useful to also have JNI
implementation in the same binary as NDK media compatibility is lower.
As such, implement a rudimentary vtable system for gstamc-codec and
gstamc-format, and allow choosing the implementation at static_init()
time.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4115>
This allows the implementations to do custom logic behind the hood. For
example, when NDK implementation is added, the entrypoint can chooses to
statically initialize the NDK implementations or the JNI one.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4115>
With this patch, the caps is registered in the order of memory features
as: VAMemory, DMABuf then raw caps in linux path, and D3D11Memory then
raw caps in windows path. It helps to prioritize the video memory for all
msdk elements when doing negotiation.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5898>
Fixing below debug layer report
ID3D12Device::CreateCommittedResource: Ignoring InitialState D3D12_RESOURCE_STATE_COPY_DEST.
Buffers are effectively created in state D3D12_RESOURCE_STATE_COMMON.
Buffer resource will be automatically promoted to D3D12_RESOURCE_STATE_COPY_DEST
at the very first COPY operation time.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5895>
Since DXGI desktop duplication API does not work with Direct3D12 device,
this element will use Direct3D11 device to acquire frame.
Then other rendering operations (e.g., texture copy, render pipeline) will
happen using Direct3D12 API
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5883>
- Fix skipsize on _update_backlog failure.
- Add robustness to AU completion detection by using AUD when present. If we've
received a AUD we overwrite the first VCL NAL detection when the result was
negative. VCL following AUD is the first VCL of next AU.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5862>
In case of tier 1 decoder, always use reference-only picture to avoid
fixed-size pool limitation and output decoded picture without
copy even for negative rate. Also do not use copy queue for GPU to GPU
copy. Copy queue is specialized for upload/download and may occupy
PCIE bandwidth. Use direct queue as recommended by vendors.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5877>
On flush event, baseclass will discard all pictures from DPB
but there can be still in-flight commands not finished yet.
Use our command queue, allocator and fence data helper objects
to keep resource available during command execution.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5877>
Instead of only supporting writing SPU data directly to YUV frames,
render the SPU data to an intermediate AYUV overlay buffer. The overlay
data is then blended to the video frame.
For the PGS format, the overlay buffer size is set to the size of the
Composition Window, and its position in the overlay composition is set
to the window position. The objects to render are now cropped when the
cropping flag is set.
For the Vobsub format, the overlay buffer size is set to the size of the
Display Area.
Once rendered, the overlay composition rectangle is now moved and scaled
to fit the video output size, to avoid clipping.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5827>
Shader visible descriptors occupy GPU resource and there are hardware
limits. Thus, in order to minimize the amount of shader visible heaps,
only non shader visible descriptor heap (staging) will be held by d3d12memory.
Then converter will copy the staging descriptor to shader visible
descriptor heap per draw.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5875>
Zero initialization would have overhead and it's not required
most cases except for textures. Use CREATE_NOT_ZEROED flag
in case of buffer resource or if a texture will be rendered without any
prior read operation.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5875>
Conversion will happen when constructed command list is executed,
not by converter element. Thus this object should not map output buffer
with write flag which will result in error if multiple threads
are building commands for the same output target frame.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5875>
Interlaced MJPEG is a big hack. Most of the streams we've found are from old
AVID tools. There are two methods to detect interlaced stream: the container
offers a height bigger (or double) than the image's height in SOF. The other
is from a APP0 marker.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5838>
Add macro which converts picture frame number to suitable timestamp in
nanoseconds for use in V4L2 VB2 buffer lookup. Since multiple codecs do
the same operation and almost all got it wrong, do it in one place so it
can be fixed in one place again, if needed.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5791>
The GstMpeg2Picture system_frame_number is guint32, constant 1000 is guint32,
GstV4l2CodecMpeg2Dec *_ref_ts multiplication result is u64 .
```
u64 result = (u32)((u32)system_frame_number * (u32)1000);
```
behaves the same as
```
u64 result = (u32)(((u32)system_frame_number * (u32)1000) & 0xffffffff);
```
so in case `system_frame_number > 4294967295 / 1000`, the `result` will
wrap around. Since the `result` is really used as a cookie used to look
up V4L2 buffers related to the currently decoded frame, this wraparound
leads to visible corruption during MPEG2 decoding. At 30 FPS this occurs
after cca. 40 hours of playback .
Fix this by changing the 1000 from u32 to u64, i.e.:
```
u64 result = (u64)((u32)system_frame_number * (u64)1000ULL);
```
this way, the wraparound is prevented and the correct cookie is used.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5791>
The GstAV1Picture system_frame_number is guint32, constant 1000 is guint32,
GstV4l2CodecAV1Dec v4l2_av1_frame.*_frame_ts multiplication result is u64 .
```
u64 result = (u32)((u32)system_frame_number * (u32)1000);
```
behaves the same as
```
u64 result = (u32)(((u32)system_frame_number * (u32)1000) & 0xffffffff);
```
so in case `system_frame_number > 4294967295 / 1000`, the `result` will
wrap around. Since the `result` is really used as a cookie used to look
up V4L2 buffers related to the currently decoded frame, this wraparound
leads to visible corruption during AV1 decoding. At 30 FPS this occurs
after cca. 40 hours of playback .
Fix this by changing the 1000 from u32 to u64, i.e.:
```
u64 result = (u64)((u32)system_frame_number * (u64)1000ULL);
```
this way, the wraparound is prevented and the correct cookie is used.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5791>
The GstVp9Picture system_frame_number is guint32, constant 1000 is guint32,
GstV4l2CodecVp9Dec v4l2_vp9_frame.*_frame_ts multiplication result is u64 .
```
u64 result = (u32)((u32)system_frame_number * (u32)1000);
```
behaves the same as
```
u64 result = (u32)(((u32)system_frame_number * (u32)1000) & 0xffffffff);
```
so in case `system_frame_number > 4294967295 / 1000`, the `result` will
wrap around. Since the `result` is really used as a cookie used to look
up V4L2 buffers related to the currently decoded frame, this wraparound
leads to visible corruption during VP9 decoding. At 30 FPS this occurs
after cca. 40 hours of playback .
Fix this by changing the 1000 from u32 to u64, i.e.:
```
u64 result = (u64)((u32)system_frame_number * (u64)1000ULL);
```
this way, the wraparound is prevented and the correct cookie is used.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5791>
The GstVp8Picture system_frame_number is guint32, constant 1000 is guint32,
GstV4l2CodecVp8Dec v4l2_vp8_frame.*_frame_ts multiplication result is u64 .
```
u64 result = (u32)((u32)system_frame_number * (u32)1000);
```
behaves the same as
```
u64 result = (u32)(((u32)system_frame_number * (u32)1000) & 0xffffffff);
```
so in case `system_frame_number > 4294967295 / 1000`, the `result` will
wrap around. Since the `result` is really used as a cookie used to look
up V4L2 buffers related to the currently decoded frame, this wraparound
leads to visible corruption during VP8 decoding. At 30 FPS this occurs
after cca. 40 hours of playback .
Fix this by changing the 1000 from u32 to u64, i.e.:
```
u64 result = (u64)((u32)system_frame_number * (u64)1000ULL);
```
this way, the wraparound is prevented and the correct cookie is used.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5791>
This reverts a part of de92a6c7f2. Unlike `image_filter` and
`video_filter`, `viewfinder_filter` does not get linked to `src` but
`viewfinderbin_queue`. Thus the fix in the mentioned commit does not
apply for it and should be reverted.
This was not spotted earlier as only the other filters are used in
the project that uncovered the issue.
Fixes: de92a6c7f2 ("camerabin: Fix source updates with user filters")
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5689>
Since the AV1 specification is not explicitly mentioning about
the array size bounds, array sizes in scalability structure
should be defined as possible maximum sizes that can have.
Also, this commit removes GST_AV1_MAX_SPATIAL_LAYERS define from
public header which is API break but the define is misleading
and this patch is introducing ABI break already
ZDI-CAN-22300
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5823>
- AU boundary detection reviewed to follow more closely H.264 spec. and more
specifically clauses 7.4.1.2.3 and 7.4.1.2.4.
- The gist of the changes is a look-a-head in then next AU required identify the
last vcl-nal of current AU and firt vcl-nal of next AU (according to
7.4.1.2.4) followed by the identification of the first nal of next AU
(according to 7.4.1.2.3).
- A backlog of all nals of current AU and next AU up to the point where current
AU can identified completed is kept.
- In NAL alignement mode vcl-nal are sent immediatly but the history is kept to
allow AU boundary detection. Non-vcl-nal can be delayed up to the reception of
the next vcl-nal to allow a correct AUD insertion.
- Based on this improved AU boudary detection we can avoid erronous AUD
insertion, like the one highlighted by test
test_parse_sliced_with_prefix_and_sei_nal_au.
- Add support for MVC AU boundary detection. (H.7.4.1.2.4)
- Explicitly report SVC not supported. We don't have the SVC NAL parsing
required to identify boundary. (missing dependency_id and quality_id fields
from SVC, see G.7.4.1.2.4)
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5741>
Serialize every GstMeta that supports serialization into the NEW_BUFFER
payload. This is especially important for GstVideoMeta in the case of
multiplanar buffers, or if stride!=width.
Sponsored-by: Netflix Inc.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5355>
The input of the vacompositor may be DMA buffers. And in this case, the input
caps has the format=DMA_DRM, which can not be recognized by base video
aggregator class' find_best_format() function. So we need to override the
update_caps() virtual function.
Also we consider the DMA kind caps in negotiated_src_caps() for output.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5160>
To achieve maximum throughput, waiting on command commit thread
is not ideal. And render-delay will introduce unwanted latency.
Best is to split thread and wait finished decoding job in a dedicated
output thread
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5812>
When creating a new VA pool set config size to zero because it's not used.
Also, given the potential different sizes from software buffer pools and VA
buffer pools, this patch handle that potential different values.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5805>
When creating a new VA pool set config size to zero because it's not used.
Also, given the potential different sizes from software buffer pools and VA
buffer pools, this patch handle that potential different values.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5805>
When creating a new VA pool set config size to zero because it's not used.
Also, given the potential different sizes from software buffer pools and VA
buffer pools, this patch handle that potential different values.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5805>
VA drivers allocate surfaces given their properties, so there's no need to
provide a buffer size to the VA pool.
Though, the buffer size is provided by the driver, or the canonical size
is used for single planed surfaces.
This patch removes the need to provide a size for the function
gst_va_pool_new_with_config() and adds a helper method to retrieve the surface
size, gst_va_pool_get_buffer_size(). Also change the callers accordingly.
Changes for custom VA pool creation will be addressed in the following commits.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/5805>
