Commit graph

164 commits

Author SHA1 Message Date
Thiago Santos
ddc76753e0 multiqueue: prevent buffering forever with playbin
When prerolling/buffering, multiqueue has its buffers limit set
to 0, this means it can take an infinite amount of buffers.

When prerolling/buffering finishes, its limit is set back to 5, but
only if the current level is lower than 5. It should (almost) never be
and this will cause prerolling/buffering to need to wait to reach the
hard bytes and time limits, which are much higher.

This can lead to a very long startup time. This patch fixes this
by setting the single queues to the max(current, new_value) instead
of simply ignoring the new value and letting it as infinite(0)

https://bugzilla.gnome.org/show_bug.cgi?id=712597
2014-01-15 10:01:59 -03:00
YanpingZhang
0c7ed542a1 multiqueue: Fix hanging if shut down while handling a serialized query
https://bugzilla.gnome.org/show_bug.cgi?id=721253
2014-01-06 11:01:12 +01:00
Thiago Santos
1c7809bc0d multiqueue: post 100% buffering if single queue is not linked
This makes buffering stop in case a stream switch happens. This is
important for adaptive streams that can disable not-linked streams
to avoid consuming the network bandwidth.

https://bugzilla.gnome.org/show_bug.cgi?id=719575
2013-12-26 08:59:58 +01:00
Olivier Crête
d935be2d78 multiqueue: Wake up on reconfigure event
After patch bda406c4, the state of the singlequeue was set to OK, but nothing
would then wake up the thread, as the other wakeup functions only look at
singlequeues that are marked as having received as not-linked.

https://bugzilla.gnome.org/show_bug.cgi?id=708200
2013-12-03 15:42:59 -05:00
Matej Knopp
7f657358a8 multiqueue: Don't reduce single queue visible size below its current level
If the multiqueue has automatically grown chances are good that
we will cause the pipeline to starve if the maximum level is reduced
below that automatically grown size.

https://bugzilla.gnome.org/show_bug.cgi?id=707156
2013-09-04 10:52:13 +02:00
Sebastian Dröge
b40599f6db multiqueue: Clean up after the streaming thread has stopped
https://bugzilla.gnome.org/show_bug.cgi?id=705835
2013-08-19 16:38:50 +02:00
Sebastian Dröge
0dc232e114 multiqueue: only block serialized query when it's safe
We must be certain that we don't cause a deadlock when blocking the serialized
queries. One such deadlock can happen when we are buffering and downstream is
blocked in preroll and a serialized query arrives. Downstream will not unblock
(and allow our query to execute) until we complete buffering and buffering will
not complete until we can answer the query..

https://bugzilla.gnome.org/show_bug.cgi?id=702840
2013-07-16 11:36:50 +02:00
Sebastian Dröge
ab6a1085ee (multi)queue: Don't access query items during flushing 2013-05-27 16:38:18 +02:00
Sebastian Dröge
e472d9d261 multiqueue: Don't do serialized queries when we're flushing
Just immediately fail the query, otherwise we would wait forever
for the query to be answered.
2013-05-27 16:22:00 +02:00
Sebastian Dröge
b6fac17502 queue/queue2/multiqueue: When flushing, make sure to not lose any sticky events
https://bugzilla.gnome.org/show_bug.cgi?id=688824
2013-05-27 13:01:43 +02:00
Sebastian Dröge
a79d3a0220 multiqueue: Initialize all GstMultiQueueItem fields in both code paths 2013-05-24 18:42:55 +02:00
Sebastian Dröge
1c6341e6a4 multiqueue: Don't access the query after signalling the waiting thread
It might've free'd the query already.
2013-05-24 18:38:40 +02:00
Sebastian Dröge
3b44a44a01 multiqueue: Make sure to always signal any possible pending serialized queries
And don't unref them when flushing the queue, they're owned by the caller!

https://bugzilla.gnome.org/show_bug.cgi?id=700342
2013-05-24 18:30:44 +02:00
Wim Taymans
fa371dad6d multiqueue: ignore empty not-linked queues
We need to ignore the not-linked queues in the underrun and overrun callbacks
because they are expected to be empty.
2013-04-05 10:15:37 +02:00
Wim Taymans
bda406c42f multiqueue: start pushing again on RECONFIGURE
When we got NOT_LINKED before and we receive a RECONFIGURE event, start pushing
again on the source pad.

See https://bugzilla.gnome.org/show_bug.cgi?id=676304
2013-04-04 19:16:23 +02:00
Branko Subasic
17bff49262 multiqueue: correct overrun handling
The control of wheteher a SingleQueue is full is not correct.
Rewrote single_queue_overrun_cb() so it checks the correct variables
when checking if the queue has reached the hard limits, and to
increase the max buffer limit once for each call.

https://bugzilla.gnome.org/show_bug.cgi?id=690557
2012-12-20 15:34:01 +01:00
Tim-Philipp Müller
666c8c11c6 Fix FSF address
https://bugzilla.gnome.org/show_bug.cgi?id=687520
2012-11-03 20:44:48 +00:00
Jan Schmidt
698324d48b multiqueue: Add EOS status to debug output about filled/unfilled 2012-10-30 10:04:14 +11:00
Sebastian Dröge
09982c3c13 dataqueue/queuearray: Make public API again
These are actually used outside of coreelements nowadays.
Also hide lots of internals and add padding and documentation.
2012-10-25 14:03:01 +02:00
Josep Torra Valles
111fcc6e31 Make intel compiler happier
https://bugzilla.gnome.org/show_bug.cgi?id=552657
2012-09-25 00:56:26 +01:00
Edward Hervey
d3ffa82639 Remove 0.10-related documentation and "Since" markers 2012-07-10 12:03:27 +02:00
Wim Taymans
76e8b2ecda task: add GDestroyNotify to _new
Add a GDestroyNotify to the user_data we pass to gst_task_new()
Change gst_pad_start_task() to also take the notify
2012-06-20 10:31:49 +02:00
Matej Knopp
c4b71c2574 multiqueue: gst_single_queue_flush unlocks the queue twice
https://bugzilla.gnome.org/show_bug.cgi?id=674044
2012-04-13 23:57:35 +01:00
Sebastian Dröge
1a61f3ec19 Merge remote-tracking branch 'origin/0.10' 2012-04-09 16:42:30 +02:00
Sebastian Dröge
829eafad0e multiqueue: Don't use buffer after pushing it downstream 2012-04-09 16:40:47 +02:00
Tim-Philipp Müller
a63829b4ff plugins: use new gst_element_class_set_static_metadata() 2012-04-09 13:05:07 +01:00
Sebastian Dröge
4b6c3c7fea Merge remote-tracking branch 'origin/0.10'
Conflicts:
	plugins/elements/gstmultiqueue.c
2012-03-29 14:54:53 +02:00
Sebastian Dröge
9441e711df multiqueue: Wake up all not-linked streams when a stream switches from linked to not-linked
We reset all the waiting streams, let them push another buffer to
see if they're now active again. This allows faster switching
between streams and prevents deadlocks if downstream does any
waiting too.

Also improve locking a bit, srcresult must be protected by the
multiqueue lock too because it's used/set from random threads.
2012-03-29 14:49:53 +02:00
Sebastian Dröge
17e691421f multiqueue: Recompute high-time too when flushing, not only high-id 2012-03-29 14:47:57 +02:00
Wim Taymans
d540a5fc68 multiqueue: handle serialized queries 2012-03-19 11:45:27 +01:00
Wim Taymans
9e2ef19dc2 queues: warn when receiving a serialized event
.. until we implement it.
2012-03-14 16:00:48 +01:00
Wim Taymans
7ab1d62c24 GST_FLOW_WRONG_STATE -> GST_FLOW_FLUSHING 2012-02-08 16:18:04 +01:00
Tim-Philipp Müller
13d91d1f6c Use recent GLib API unconditionally now that we depend on the latest GLib 2012-01-22 01:25:22 +00:00
Wim Taymans
252327f87a Update for new gthread API 2012-01-19 09:27:04 +01:00
Tim-Philipp Müller
a1daf846f3 Merge remote-tracking branch 'origin/master' into 0.11
Conflicts:
	gst/gstobject.h
	libs/gst/check/gstcheck.h
	libs/gst/controller/gstcontroller.c
	plugins/elements/gstidentity.c
	tools/gst-xmlinspect.c
2011-12-04 15:38:09 +00:00
Tim-Philipp Müller
2666450864 Suppress deprecation warnings in selected files, for g_static_rec_mutex_* mostly
GStaticRecMutex is part of our API/ABI, not much we can do here in 0.10.
2011-12-04 14:38:26 +00:00
Sebastian Dröge
1fa356a23c Merge branch 'master' into 0.11
Conflicts:
	gst/gstpad.c
	libs/gst/base/gstbaseparse.c
2011-11-24 11:23:07 +01:00
Vincent Penquerc'h
611ac6ea85 multiqueue: check filled state of queues even if another one is empty
This will avoid a case where overrun is never signalled if some
stream never produces any data, causing playbin2 to not end preroll.

https://bugzilla.gnome.org/show_bug.cgi?id=660778
2011-11-24 10:38:34 +01:00
Wim Taymans
2f1ed65339 pad: Merge pad mode activation functions
Add the pad mode to the activate function so that we can reuse the same function
for all activation modes. This makes the core logic smaller and allows for some
elements to make their activation code easier. It would allow us to add more
scheduling modes later without having to add more activate functions.
2011-11-21 13:29:05 +01:00
Wim Taymans
39a5e26ea9 pad: add parent to activate functions 2011-11-18 13:54:29 +01:00
Wim Taymans
612b1fbb14 pad: add parent to other functions
Add parent to chain, chain_list, getrange and event functions.
2011-11-17 12:40:45 +01:00
Wim Taymans
361a7ae44d add parent to internal links 2011-11-16 17:49:46 +01:00
Wim Taymans
09a8294d36 pad: add parent to the query function 2011-11-16 17:22:56 +01:00
Wim Taymans
54e1174060 GstPadFlags: rename flags GST_PAD_* -> GST_PAD_FLAG_* 2011-11-16 12:36:51 +01:00
Wim Taymans
06d4828df3 plugins: remove obsolete parent checks 2011-11-16 12:11:12 +01:00
Wim Taymans
b5c3e254b1 pad: remove getcaps and use caps query
Remove the getcaps function on the pad and use the CAPS query for
the same effect.
Add PROXY_CAPS to the pad flags. This instructs the default caps event and query
handlers to pass on the CAPS related queries and events. This simplifies a lot
of elements that passtrough caps negotiation.
Make two utility functions to proxy caps queries and aggregate the result. Needs
to use the pad forward function instead later.
Make the _query_peer_ utility functions use the gst_pad_peer_query() function to
make sure the probes are emited properly.
2011-11-15 11:20:48 +01:00
Wim Taymans
b7966c0c7d pad: make an ACCEPT_CAPS query
Replace the acceptcaps function with a query.
2011-11-09 17:36:00 +01:00
Wim Taymans
ac9e5533b5 pad: add more queries
Add more query functions to prepare for doing more with queries
2011-11-09 11:22:36 +01:00
Wim Taymans
9c0d8ca718 Merge branch 'master' into 0.11
Conflicts:
	gst/gstelement.h
	gst/gstghostpad.c
	gst/gstminiobject.c
2011-11-08 12:54:15 +01:00
Tim-Philipp Müller
16dcd5e958 docs: fix Since: markers for API added after 0.10.35 2011-11-08 00:32:36 +00:00