Althought the XEvent's xclient.data.l array is an array of
longs they will be constrained to 32 bit by the X11 protocol.
On 64 bit architectures use two elements of the array to store
one pointer.
This fixes segfaults that happen at least for every example
on startup.
This reverts commit 96e4ab18c2cf9876f6c031b9aba6282d0bd45a93.
You should have asked first. And you would have been told "no",
because it causes people on development branches to do a huge
amount of extra work.
Althought the XEvent's xclient.data.l array is an array of
longs they will be constrained to 32 bit by the X11 protocol.
On 64 bit architectures use two elements of the array to store
one pointer.
This fixes segfaults that happen at least for every example
on startup.
- Length of NIT stream descriptors was not detected correct
- Reserved bits was not set according to EN 300 468, ISO/IEC 13818-1
- Also set output data size if the section was previously packetized
https://bugzilla.gnome.org/show_bug.cgi?id=723892
An SEI RBSP could contains more than one SEI message as specified in
7.4.2.3.1.
This commit change the parser API: the gst_h264_parser_parse_sei()
function now create and fill a GArray containing GstH264SEIMessage.
https://bugzilla.gnome.org/show_bug.cgi?id=721715
The spec states that the last byte of a NAL 'shall not' be 0x00
and it is allowed for byte-stream format to add padding 0x00 for
alignment.
So our parser should strip any trailling 0x00.
https://bugzilla.gnome.org/show_bug.cgi?id=721384
A deadlock can happen when the source sends EOS when
being put to NULL as the object lock is being held by the
thread that sets the element to NULL and is needed by
the event handler.
The parser assumes that every time there is a 0 before the startcode,
it is part of the startcode. But that's not true.
From the specification
Byte stream NAL unit syntax
zero_byte is a single byte equal to 0x00.
When any of the following conditions are fulfilled, the zero_byte syntax
element shall be present.
– the nal_unit_type within the nal_unit( ) is equal to 7 (sequence parameter
set) or 8 (picture parameter set)
– the byte stream NAL unit syntax structure contains the first NAL unit of an
access unit in decoding order, as specified by subclause 7.4.1.2.3.
The problem with doing this for all startcodes is that a trailing zero can mess
up timestamps. The trailing zero gets prepended to the startcode, which will
carry the PTS and DTS of previous buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=664443
Fix picture level scaling lists derivation from fall-back rule set B,
as specified in 7.4.2.2. More precisely, the sequence level scaling
lists need to be used but intra and inter lists arguments were swapped.
This fixes FRExt/freh5.264 from conformance testing.
https://bugzilla.gnome.org/show_bug.cgi?id=720099
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
While it was a great idea, various g-i based bindings don't support
GArray with entries greater than sizeof(gpointer) :(
So let's just make everybody happy by just using GPtrArray.
And since we're breaking the API, also rename the various descriptor fields
to no longer have the descriptor_ prefix.
It does cost a bit more in terms of memory/cpu usage, but makes it usable
from bindings.
We only check input from the API user with g_return_*_if_fail().
Internal sanity checks should use g_assert() instead, which is
disabled by default for releases.
* Avoid repeating code everywhere, and instead provide all parsing
information in one go.
* Add BAT support
* Refine BAT/CAT identification (by adding PID checks)
Fix calculation of the frame cropping rectangle, and more precisely
the actual cropped height. The frame_crop_top_offset subtraction
was not scaled up with SubHeightC.
Also clean-up variables to align more with (7-18) to (7-21).
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Assign the un-cropped width/height to sps->width/sps->height
during sps header parsing. Added new fields to SPS header structure
to provide the crop-rectangle dimensions.
https://bugzilla.gnome.org/show_bug.cgi?id=694068
Cancelled is a 'permanent' state of the uridownloader and is only
removed by a call to _reset. When a download fails we just want to
return NULL on the fetch function and leave the downloader ready
for another fetch, otherwise the user has to call _reset after
failed downloader, even when it didn't call _cancel.
Due to the variety of section types out there, we need to add
some checks when identifying section types.
We check here that the PID is also consistent with the table_id.
The size checks were wrong. The smallest size for a NIT is 16 bytes
(12 for the smallest content + 4 for crc) and the smallest size for
a inner stream loop is 6 bytes (without any descriptors).
Also remove FIXME that has already moved elsewhere
Add API to parse the Slice header. This also calculates the macroblock
position as specified in 6.3.16.
https://bugzilla.gnome.org/show_bug.cgi?id=664274
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Add new interface to MPEG-2 video parser that takes GstMpegVideoPacket
arguments instead of data, size, and offset. New functions are called
after gst_mpeg_video_packet_*() and provide the default implementation.
Older API is moved to the deprecated namespace and uses the new functions.
https://bugzilla.gnome.org/show_bug.cgi?id=692933
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
* Add a base page for the library
* Add pages for the base MPEG-TS section and descriptors
* Add pages for the known variants
* Add documentation on more fields/sections/types
* Remove some fixmes that were ... fixed
These are the values officially registered in the base specification
(H.222.0/13818-1). Later on we can add other enums for other variants
Note that the enum is not used in the structure fields (such as a pmt
stream stream_type field) since it can contain values from other
variants.
* In order to avoid future clashing between table_id for the various
mpeg-ts variants, use different enums.
* In order to keep everything clean(ish) and allow for cleaner growth,
split into different files (will need the same for descriptors later)
* Also ... implement free functions for all table types :)
Sorry for this :( But this makes it more in sync with expected type
naming in gobject (i.e. CamelCase and not CamelMAYBECase).
Also split descriptor type enums into the different variants:
* ISO H.222.0 / 13818-1 (i.e. standard mpeg-ts)
* DVB
* ATSC
* ISDB
* miscellaneous
This will avoid future clashes when specs use the same descriptor type
Exposes various MPEG-TS (ISO/IEC 13818-1) and DVB (EN 300 468) Section
Information as well as descriptors for usage by plugins and applications.
This replaces entirely the old GstStructure-based system for conveying
mpeg-ts information to applications and other plugins.
Parsing and validation is done on a "when-needed" basis. This ensures
the minimal overhead for elements and applications creating and using
sections and descriptors.
Since all information is made available, this also allows applications
to parse custom sections and descriptors.
Right now the library is targeted towards parsing, but the structures
could be used in the future to allow applications to create and inject
sections and descriptors (for usage by various mpeg-ts elements).
https://bugzilla.gnome.org/show_bug.cgi?id=702724
Adds a new API gst_uri_downloader_fetch_uri_with_range that allows
downloading only a byte range from an URI. It uses a seek event
sent to the source to signal the range to be downloaded.
https://bugzilla.gnome.org/show_bug.cgi?id=702206
Ignore the display_extension values if they are greater than the width/height
values provided by seqhdr and calculate the PAR based on the seqhdr values.T
his is what DVD players are doing.
Thanks to "David Schleef <ds@schleef.org>"
https://bugzilla.gnome.org/show_bug.cgi?id=685103
In some scenarios, for example in QtWebKit, might be difficult to obtain full
control on the egl display and it might be only accessible indirectly via
eglGetCurrentDisplay().
https://bugzilla.gnome.org/show_bug.cgi?id=700058
When chain method was called after gst_uri_downloader_stop and before state has been changed to NULL, execution was blocking on g_mutex_lock.
Conflicts:
gst-libs/gst/uridownloader/gsturidownloader.c
When downloading and cancelling quickly the uridownloader object and the
element using it could miss the cancelled window and the uridownloader
would fetch the wrong URI and block on subsequent fetches.
This was also problematic when stopping elements, while one task would
call the cancel, another element thread could issue a new fetch_uri. As
the cancel state isn't 'permanent' this fetch_uri would block and
prevent the whole element from stopping and going to NULL.
This patch makes the 'cancelled' state permanent until a
gst_uri_downloader_reset is called. This way the element knows the
window where the uridownloader isn't active and only reactivate it when
ready.
This can be used by parsers to provide pre-parsed information to
downstream elements that would require it (so they can avoid having
to parse the bitstream again).
The content of the EGLImages can be at least in GStreamer orientation,
meaning top line first in memory, or OpenGL orientation, meaning
bottom line first in memory.
Add utility functions to convert quantization matrices from zigzag scan
order (as encoded in the bitstream) into raster scan order. Also provide
another function to reverse the operation.
https://bugzilla.gnome.org/show_bug.cgi?id=693000
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Quantizer matrices are encoded in zigzag scan order in the bitstream,
but they are stored in raster scan order when they are parsed. However,
default matrices were also prepared in zigzag scan order, hence the
mismatch. i.e. the matrices were presented either in raster scan order
if they are explicitly present in the bitstream, or they were presented
in zigzag scan order if the default definitions were to be used instead.
One way to solve this problem is to always expose the quantization
matrices in zigzag scan order, since this is the role of the parser to
not build up stories from the source bitstream and just present what
is in there.
Utility functions will be provided to convert quantization matrices in
either scan order.
https://bugzilla.gnome.org/show_bug.cgi?id=693000
Signed-off-by: Cong Zhong <congx.zhong@intel.com>
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Fix parsing of residual bytes. This is a two-step process. First,
remaining colums of full vertical resolution (<height>) need to be
processed. Next, remaining bytes in the first row can be processed,
while taking into account the fact that we may have filled in the
first columns already. So, this is not full horizontal resolution.
The following figure helps in understanding the expected order of
operations, for a 8x5 MBs bitplane.
5 5 6 6 6 6 6 6
5 5 1 1 1 2 2 2
5 5 1 1 1 2 2 2
5 5 3 3 3 4 4 4
5 5 3 3 3 4 4 4
So, after tiles 1 to 4 are decoded, vertical tile 5 needs to be
processed (2x5 MBs) and then the horizontal tile 6 (6x1 MBs).
https://bugzilla.gnome.org/show_bug.cgi?id=692461
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Fix decoding of DIFF6 or NORM6 bitplanes with an odd number of lines
(3x2 "horizontal" tiles). In this case, we have to skip the first line
of macroblocks but <width> number of bytes was used to do so, instead
of the actual <stride> size.
This fixes decoding for the video sample attached to:
https://bugzilla.gnome.org/show_bug.cgi?id=668565https://bugzilla.gnome.org/show_bug.cgi?id=692461
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Add gst_vc1_parse_slice_header() function to parse slice headers as
described in 7.1.2. Slice layers are optional and allowed in advanced
profile mode only. Picture header, if available (PIC_HEADER_FLAG),
is parsed but not recorded because it shall be the same as that was
previously parsed with gst_vc1_parse_frame_header().
This fixes SA00049.vc1 conformance test.
https://bugzilla.gnome.org/show_bug.cgi?id=692388
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Fix decoding of DIFF2 or NORM2 bitplanes with an odd number of macroblocks.
In particular, account for the first bit that was already parsed so that to
avoid a buffer overflow after all pairs are parsed.
This fixes SA00040.vc1 conformance test.
https://bugzilla.gnome.org/show_bug.cgi?id=692312
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Rename dqsbedge to dqbedge. The intent is that we can only have a single
boundary edge selector, depending on the value of dqprofile. So, dqbedge
represents DQSBEDGE if dqprofile == GST_VC1_DQPROFILE_SINGLE_EDGE, or
DQDBEDGE if dqprofile == GST_VC1_DQPROFILE_DOUBLE_EDGE.
The former dqbedge field is marked as unused and can be removed on the
next gst-plugins-bad version that allows ABI changes.
https://bugzilla.gnome.org/show_bug.cgi?id=692272
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Fix parsing of VOPDQUANT when DQUANT == 2. In particular, DQUANTFRM is
not present in the bitstream in this case and it shall be derived to
the default value of zero (7.1.1.31.1).
https://bugzilla.gnome.org/show_bug.cgi?id=692271
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Fix calculation of ALTPQUANT when DQUANT == 1. PQDIFF alters ALTPQUANT
in any case. See 7.1.1.31.6.
https://bugzilla.gnome.org/show_bug.cgi?id=692270
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Fix parse_vopdquant() to correctly parse DQPROFILE, which is 2 bits
instead of a single bit.
https://bugzilla.gnome.org/show_bug.cgi?id=692267
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
The standard specifies that when slice_beta_offset_div2 is not present
in the slice header, then the value of slice_beta_offset_div2 shall be
inferred to be equal to 0.
https://bugzilla.gnome.org/show_bug.cgi?id=692265
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Coverity found missing break in parse_frame_header_advanced() when
determining PTYPE from FPTYPE for interlaced streams.
https://bugzilla.gnome.org/show_bug.cgi?id=688626
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
gst_h264_parse_sps() returned FALSE if it parsed invalid (negative)
size components. Now make it gracefully return GST_H264_PARSER_ERROR
instead of GST_H264_PARSER_OK (FALSE).
https://bugzilla.gnome.org/show_bug.cgi?id=684568
Change the way the pixel-aspect-ratio is computed by
interpreting the sequence header aspect ratio info
as MPEG-1 values until a sequence extension or
sequence display extension is seen, and then updating
the sequence header struct accordingly.
Fixes incorrect anamorphic display on some MPEG-2 (DVD)
sequences.
ASPECT_HORIZ_SIZE and ASPECT_VERT_SIZE are syntax elements that hold
binary encodings of sizes ranging from 1 to 256. Thus, the calculated
pixel-aspect-ratio was off by one.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=683858
Anonymous union is an ISO C (2011) feature that is not exposed in
compilers strictly conforming to the previous standard.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
need to pass a GstSample to the utilitary preview buffer post functions
as a GstBuffer doesn't have caps anymore. The GstSample has the GstCaps
and it is used to inform the preview's pipeline about the format of the
input, before it gets converted to the user's requested output format.
... to allow for more efficient parsing and (more) consistent parsing API
among various codec parsers.
Fixes#672701.
Conflicts:
gst/videoparsers/gstmpegvideoparse.c
This always happens with GstByteReader/Writer and friends when
not taking into account returned boolean of the _read/_write functions
(which is actually wrong).
Make use of the *_unchecked variant as much as possible, or take the
returned value into account.
Some hardware video decode acceleration API (VA-API, DXVA) require
a bit count to the first macroblock, minus the number of emulation
prevention bytes. So, instead of having the consumer of the library
scan the slice_header() again, just record that number while parsing.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=671203
The entries were not filled in linearly and the termination was not
recorded either. Now, the actual number of modifications is recorded
similarly to dec_ref_pic_marking(). i.e. an explicit counter instead
of storing the termination value in the array.
https://bugzilla.gnome.org/show_bug.cgi?id=668192
altref/invisible 'frame' do not describe some frame directly, so it can't be
displayed and timestamps should not be updated.
Fix bug: https://bugzilla.gnome.org/show_bug.cgi?id=655245
Signed-off-by: Oleksij Rempel (Alexey Fisher) <bug-track@fisher-privat.net>
New caps will need to be negotiated when reset happens
(PAUSED to READY). Without reseting the internal
stored format, basevideoencoder/decoder wouldn't call the
configuration function when the same caps was negotiated
again as they would believe this was the same caps as before.
The issue is that _stop has been called when going to READY and
the elements would have reset their internal codec libs/state as
well. A new configuration should be done.
This is useful for cases where the caller *knows* that the provided
input contains a whole NALU and can therefore avoid:
* the expensive checks for the next start code (which won't be present)
* delaying the input parsing (since we would need the next incoming NALU
in order for the parsing code to detect the next start code)
https://bugzilla.gnome.org/show_bug.cgi?id=665584
Const-ify one more VLC table. Fix spelling of 'hybrid'.
No need to explicitly call ensure_debug_category() everywhere,
that will be done automatically from GST_LOG() and friends
via GST_CAT_DEFAULT.
Get rid of weird code that copies a list manually, taking
ownership of the elements and then frees the old list. Instead,
just take over the old list entirely. (If the intent was to
reverse the list, one could use g_list_reverse() instead).
Then, push events in the list out from last to first (since they
were prepended as they came in) instead of just pushing out the
last in the list and leaking the others.
When vui->timing_info_present is 0, vui->fixed_frame_rate_flag and others
cannot be accessed since they have not been set.
It was also possible that sps->fps_{num,den} end up initialized here.
Create preview pipeline already in initialization phase. This speeds
up NULL_TO_READY state change. Also implement a separate function for
setting the preview filter element.
This also restricts the preview filter property to work only on
NULL state.
Instead of having a single VC1SequenceHeader structure, use the 3 structs
from the "Table 265: Sequence Layer Data Structure" of the specification
for the library to be more flexible.
Implement the functions to parse them
Use g_new0 to initialize all fields with 0 to only cleanup what has been
initialized. This makes cleanup work correctly when some initialization
fails and pointers are left in some inconsistent state.
If the preview pipeline fails creation, for any reason, we should
fail basecamerasrc state change.
Also adds a missing g_return_if_fail check to preview pipeline
functions
The preview pipeline doesn't need 2 colorspace converters, remove
one to speed up caps negotiation and reduce the delay on getting
the first preview buffer out of the preview pipeline.
It shouldn't cause problems as videoscale and ffmpegcolorspace seems
to handle the same caps, so no conversion should be needed for
videoscale. Additionally, camerabin1 has been working with a similar
pipeline with a single ffmpegcolorspace and no bugs have been open about it
so far.
This allows to specify constraints on the compressed downstream caps
by muxers or capsfilters, which will then be forwarded to upstream
and allows video converters to fulfill the constraints.
Code based on Mark Nauwelaerts audio encoder base class.
GstPhotography API contains functions to get/set flicker reduction
mode, but GstPhotoCaps enumeration doesn't have item for it, so elements
are not able to report whether they support this feature or not.
Also add useful GST_PHOTOGRAPHY_CAPS_ALL for easily selecting all
capabilities at once.
https://bugzilla.gnome.org/show_bug.cgi?id=655318
The use of this method was removed in:
commit 539f10f4d9
basecamerasrc: More cleanup
The code from wrappercamerabinsrc is from v4l2camerasrc but is unused:
get_allowed_input_caps is not called anywhere.
Implements a message handling function to preview pipeline bus.
If GST_MESSAGE_ERROR is seen, considers preview pipeline unable
to do its job and posts an error message to application.
Sets pipeline element to NULL so that subsequent calls to post_preview
and set_caps functions just returns without pushing anything to the
disposed preview pipeline. Leaves further actions to the application.
Implements a state indicating flag to preview pipeline,
so that new caps are not set if the pipeline is processing a
preview. The caps are set as pending and applied when the
next preview post is called.
In this case a wait was implemented in the post_preview function,
so that new preview image buffer will wait until the other previews
have been posted to the application and the new caps can be used
safely.
While this changes API slightly (e.g. actually uses set_format now), which is OK
for unstable API, it has following merits:
* symmetric w.r.t. stop at state change
* in line with other base class practice
* otherwise no subclass method at state change (global activation time)
Moreover, subclassese are either unaffected or trivially adjusted accordingly.
While this changes order w.r.t. set_format, which is OK for unstable API,
it has following merits:
* symmetric w.r.t. stop at state change
* in line with other base class practice
* little benefit in invoking 2 subclass virtual methods (set_format and start)
in immediate succession; all actions in the second could be done in the first
whereas subclass has no chance to do anything 'global' at activation time
Moreover, current -bad subclass relevant methods either trivially commute
or are either trivially adjusted accordingly.
Remove the android/ top dir
Fixe the Makefile.am to be androgenized
To build gstreamer for android we are now using androgenizer which generates the needed Android.mk files.
Androgenizer can be found here: http://git.collabora.co.uk/?p=user/derek/androgenizer.git
This is not implemented in any of our real sources to which wrappercamerabinsrc
might connect but this is optional and can be implemented at any time. A
limit on the software zoom level using video{crop,scale} would be arbitrary.
Use resource warning messages to notify camerabin2 that a capture
as aborted or couldn't be started, making it decrement the
processing counter and making the idle property more reliable.
Checks if the new received preview-caps are equal to what is
already in use, skips the preview-caps setting logic in case
new caps are same as current ones.
Adds a virtual function to basecamerasrc in case subclasses want to be
notified of changing preview caps. This is useful if the subclass wants
to post the preview itself or if it wants to provide a preview buffer
as close to as possible to the user's requested resolution to the
preview generation pipeline.
Adds some more logging and always assume capture has started before
start_capture is called. This helps on image captures that might
call finish_capture directly from start_capture or before start_capture
finishes.
Adds a readable property to gstphotography interface to query
what are the allowed preview caps supported.
Patch by Tommi Myöhänen <ext-tommi.1.myohanen@nokia.com>
The timestamps are only used if the output adapter is used, not
if complete frames are provided by the decoder and finish_frame() is
called and even in the case where the output adapter is used they
might not be used and are leaked.
Add some guards and fat warnings to the header files with still unstable
API, so people who just look at the installed headers know that it
actually is unstable API.
Merging previous commit into current codebase.
Move include directives for gst-libs into GST_PLUGINS_BAD_CFLAGS,
and fix all the Makefiles that use it. This is so that all the
include directories are added in the proper order: first the
directories in srcdir/builddir, then gst-plugins-base dirs, then
gstreamer dirs. If the order is wrong, installed headers may be
used instead of local headers and/or uninstalled headers from -base.
Because config.h defines __MSVCRT_VERSION__, which should be defined
before inclusion of any system header.
Also fixes mpegdemux Makefile.am LIBADD typo.
Fixes#606665
This allows to get rid of the sampling_rate variable in the base-class. Also now
subclasses can modify the caps to actualy negotiate. This is needed to e.g. set
audio-channel positions.
Revert the changes that added audio positions to template caps. We have an un-
fortunate limitation in core that does not allow to do it. Keep a few things
commented out, so that the channel position can later on be set in setcaps.
This reverts commit 4c087bcb07.
The reverted commit changes the order that set_format() and start()
are called, which is incorrect. The correct order is set_format(),
start(), handle_frame()..., stop()
This queries port roles from the LV2 data and converts it into GStreamer
channel positions. This should allow any type of multi-channel plugin
(including beyond stereo, e.g. surround) to work fine in GStreamer,
and with elements that require channel positions to be explicitly stated.
Install the headers, version the library with @GST_MAJORMINOR@,
add all required libraries to _LIBADD instead of _LDFLAGS,
and add GST_*_LDFLAGS to _LDFLAGS.
Fixes bug #594715.
-remove gst-libs/gst/dshow
-fakesource is moved from gst-libs/gst/dshow to sys/dshowsrcwrapper
-some minor changes (C/C++ check and includes) to make the plugin
compile again.
Add some guards and fat warnings to the header files with still unstable
API, so people who just look at the installed headers know that it
actually is unstable API.
Also move schroedinger plugin. This creates a new library,
gstbasevideo-0.10, which will probably be merged back into
gstvideo-0.10 when this is moved back to -base.
- Separate gstsignalprocessor into a separate library (not sure if this
is in the right place, but it works for now anyway)
- Create LV2 element based on LADSPA element, port most discovery
functionality
Application developers won't know right away which module an interface comes from,
and may assume that it is covered by the usual GStreamer API guarantees, so make
it as clear as possible that this particular API is still subject to change
(should have done that with other libraries in -bad before too really).
Original commit message from CVS:
* gst-libs/gst/app/gstappsrc.c: (gst_app_src_class_init),
(gst_app_src_init), (gst_app_src_set_property),
(gst_app_src_get_property), (gst_app_src_query),
(gst_app_src_set_latencies), (gst_app_src_set_latency),
(gst_app_src_get_latency), (gst_app_src_push_buffer_full):
* gst-libs/gst/app/gstappsrc.h:
Add properties and methods to configure and retrieve the min and max
latencies.
Original commit message from CVS:
* examples/app/appsrc-ra.c: (feed_data):
* examples/app/appsrc-seekable.c: (feed_data):
* examples/app/appsrc-stream.c: (read_data):
* examples/app/appsrc-stream2.c: (feed_data):
Fix example to unref after emiting the push-buffer action.
* gst-libs/gst/app/gstappsrc.c: (gst_app_src_class_init),
(gst_app_src_push_buffer_full), (gst_app_src_push_buffer),
(gst_app_src_push_buffer_action):
Don't take the ref on the buffer in push-buffer action because it's too
awkward for bindings. Fixes#564482.
Original commit message from CVS:
Patch by: 이문형 <iwings at gmail dot com>
* gst-libs/gst/app/gstappsrc.c: (gst_app_src_push_buffer):
Don't forget to release the lock again if we bail out because some
pad is flushing or we've reached EOS, otherwise things will lock up
next time _push_buffer() is called (#562802).
Original commit message from CVS:
* gst-libs/gst/app/gstappsink.c:
* gst-libs/gst/app/gstappsrc.c:
* gst/h264parse/gsth264parse.c:
Wim, you're a bad boy. You don't want people to contact you or what?
Original commit message from CVS:
2008-06-16 Andy Wingo <wingo@pobox.com>
* gst-libs/gst/app/gstappsrc.c (gst_app_src_set_max_bytes)
(gst_app_src_get_max_bytes, gst_app_src_push_buffer): Use
G_GUINT64_FORMAT. Avoid overflow in get_max_bytes().
Original commit message from CVS:
* examples/app/.cvsignore:
* examples/app/Makefile.am:
* examples/app/appsink-src.c: (on_new_buffer_from_source),
(on_source_message), (on_sink_message), (main):
Add beefed up example app from bug #413418. It now also uses appsink
instead of fakesink for more ultimate coolness.
* gst-libs/gst/app/gstappsrc.c: (gst_app_src_class_init),
(gst_app_src_init), (gst_app_src_set_property),
(gst_app_src_get_property), (gst_app_src_unlock),
(gst_app_src_unlock_stop), (gst_app_src_create),
(gst_app_src_set_max_bytes), (gst_app_src_push_buffer),
(gst_app_src_end_of_stream):
* gst-libs/gst/app/gstappsrc.h:
Add block property to allow push based implementation to block when we
fill up the appsrc queues.
Emit the enough-data signal while releasing our lock.
Original commit message from CVS:
* ext/dc1394/gstdc1394.c:
* ext/ivorbis/vorbisdec.c:
* ext/jack/gstjackaudiosink.c:
* ext/metadata/gstmetadatademux.c:
* ext/mythtv/gstmythtvsrc.c:
* ext/theora/theoradec.c:
* gst-libs/gst/app/gstappsink.c:
* gst/bayer/gstbayer2rgb.c:
* gst/deinterlace/gstdeinterlace.c:
* gst/rawparse/gstaudioparse.c:
* gst/rawparse/gstvideoparse.c:
* gst/rtpmanager/gstrtpbin.c:
* gst/rtpmanager/gstrtpclient.c:
* gst/rtpmanager/gstrtpjitterbuffer.c:
* gst/rtpmanager/gstrtpptdemux.c:
* gst/rtpmanager/gstrtpsession.c:
* gst/rtpmanager/gstrtpssrcdemux.c:
* gst/selector/gstinputselector.c:
* gst/selector/gstoutputselector.c:
* gst/videosignal/gstvideoanalyse.c:
* gst/videosignal/gstvideodetect.c:
* gst/videosignal/gstvideomark.c:
* sys/oss4/oss4-mixer.c:
* sys/oss4/oss4-sink.c:
* sys/oss4/oss4-source.c:
Do not use short_description in section docs for elements. We extract
them from element details and there will be warnings if they differ.
Also fixing up the ChangeLog order.
Original commit message from CVS:
* examples/app/Makefile.am:
* examples/app/appsrc-ra.c: (feed_data), (seek_data),
(found_source), (bus_message), (main):
* examples/app/appsrc-seekable.c: (feed_data), (seek_data),
(found_source), (bus_message), (main):
* examples/app/appsrc-stream2.c: (feed_data), (found_source),
(bus_message), (main):
Added 3 more example application for using appsrc in random-access mode,
pull-mode streaming and pull mode seekable.
* gst-libs/gst/app/gstappsrc.c: (gst_app_src_class_init),
(gst_app_src_start), (gst_app_src_do_get_size),
(gst_app_src_create):
* gst-libs/gst/app/gstappsrc.h:
Make stream-type property writable.
Unset flushing when starting so that we reuse appsrc.
Inform basesrc about the configured size.
Emit seek-data signal when we are going to a different offset in
random-access mode.
Original commit message from CVS:
* examples/app/.cvsignore:
* examples/app/Makefile.am:
* examples/app/appsrc-stream.c: (read_data), (start_feed),
(stop_feed), (found_source), (bus_message), (main):
Added an example on how to use appsrc in playbin in streaming mode from
an mmapped file.
* examples/app/appsrc_ex.c: (main):
Set pipeline to NULL to free queued buffers.
* gst-libs/gst/app/gstapp-marshal.list:
* gst-libs/gst/app/gstappsrc.c: (stream_type_get_type), (_do_init),
(gst_app_src_class_init), (gst_app_src_init),
(gst_app_src_flush_queued), (gst_app_src_dispose),
(gst_app_src_set_property), (gst_app_src_get_property),
(gst_app_src_unlock), (gst_app_src_unlock_stop),
(gst_app_src_start), (gst_app_src_stop), (gst_app_src_is_seekable),
(gst_app_src_check_get_range), (gst_app_src_do_seek),
(gst_app_src_create), (gst_app_src_set_stream_type),
(gst_app_src_get_stream_type), (gst_app_src_set_max_bytes),
(gst_app_src_get_max_bytes), (gst_app_src_push_buffer),
(gst_app_src_end_of_stream), (gst_app_src_uri_get_type),
(gst_app_src_uri_get_protocols), (gst_app_src_uri_get_uri),
(gst_app_src_uri_set_uri), (gst_app_src_uri_handler_init):
* gst-libs/gst/app/gstappsrc.h:
Measure max queue size in bytes instead.
Add support for 3 modes of operation, streaming, seekable and
random-access, making basesrc handle the scheduling modes for each.
Add appsrc:// uri handler so that automatic plugging can be done from
playbin2 or uridecodebin, for example.
Added support for custom segment formats.
Add support for push and pull based operations from the application.
Expand the methods so that errors can be detected.
Flush the queued buffers on seeks and when shutting down.
Add signals to inform the app that a seek must happen.
Original commit message from CVS:
* gst-libs/gst/app/gstappsink.c: (gst_app_sink_class_init),
(gst_app_sink_init), (gst_app_sink_set_property),
(gst_app_sink_get_property), (gst_app_sink_unlock_start),
(gst_app_sink_unlock_stop), (gst_app_sink_flush_unlocked),
(gst_app_sink_start), (gst_app_sink_stop), (gst_app_sink_event),
(gst_app_sink_preroll), (gst_app_sink_render),
(gst_app_sink_set_caps), (gst_app_sink_set_drop),
(gst_app_sink_get_drop):
* gst-libs/gst/app/gstappsink.h:
Start some docs.
Add property to drop buffers when the queue is filled
Fix unlocking and flushing when the queues are filled.
Original commit message from CVS:
* gst-libs/gst/app/gstappsink.c: (gst_app_sink_class_init),
(gst_app_sink_init), (gst_app_sink_set_property),
(gst_app_sink_get_property), (gst_app_sink_event),
(gst_app_sink_preroll), (gst_app_sink_render),
(gst_app_sink_set_emit_signals), (gst_app_sink_get_emit_signals),
(gst_app_sink_set_max_buffers), (gst_app_sink_get_max_buffers),
(gst_app_sink_pull_buffer):
* gst-libs/gst/app/gstappsink.h:
Add more docs.
Add signals for when preroll and render buffers are available.
Add property to control signal emission.
Add property to control the max queue size.
Original commit message from CVS:
* gst-libs/gst/dshow/Makefile.am:
Use CXXFLAGS rather than CFLAGS; these are C++ files.
Define required constants appropriately.
* sys/dshowdecwrapper/Makefile.am:
Add required include dir, libraries.
Define required constants appropriately.
Original commit message from CVS:
* gst-libs/gst/dshow/Makefile.am:
* sys/dshowdecwrapper/Makefile.am:
* sys/dshowsrcwrapper/Makefile.am:
Add Makefiles to win32 plugins and lib.
They will need to be tested and probably fixed by developers
working with mingw. This is a first step to include source files
with releases.
Original commit message from CVS:
* gst-libs/gst/app/gstappsink.c: (gst_app_sink_dispose):
Really clean up the queue instead of just unreffing all buffers
in it.
* gst-libs/gst/app/gstappsrc.c: (gst_app_src_base_init),
(gst_app_src_class_init), (gst_app_src_init),
(gst_app_src_dispose), (gst_app_src_finalize):
Fix dispose/finalize.
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
* gst-libs/gst/dshow/gstdshowfakesink.cpp:
(CDshowFakeSink.CDshowFakeSink):
* gst-libs/gst/dshow/gstdshowfakesink.h: (CDshowFakeSink.m_hres):
Fix crasher in constructor due to the base class's constructor
not necessarily being NULL-safe (depends on the SDK version used
apparently; #492406).
* sys/dshowsrcwrapper/gstdshowaudiosrc.c: (gst_dshowaudiosrc_prepare):
* sys/dshowsrcwrapper/gstdshowvideosrc.c: (gst_dshowvideosrc_set_caps):
Fix a couple of MSVC compiler warnings (#492406).
Original commit message from CVS:
* gst-libs/gst/app/gstappsink.c: (gst_app_marshal_OBJECT__VOID),
(gst_app_sink_class_init), (gst_app_sink_init),
(gst_app_sink_dispose), (gst_app_sink_finalize),
(gst_app_sink_set_property), (gst_app_sink_get_property),
(gst_app_sink_flush_unlocked), (gst_app_sink_start),
(gst_app_sink_event), (gst_app_sink_getcaps),
(gst_app_sink_set_caps), (gst_app_sink_get_caps),
(gst_app_sink_is_eos), (gst_app_sink_pull_preroll),
(gst_app_sink_pull_buffer):
* gst-libs/gst/app/gstappsink.h:
Add properties, signals and actions to access the element even without
linking to the library.
Fix some method names and signatures.
Original commit message from CVS:
* gst-libs/gst/app/gstappsink.c: (gst_app_sink_class_init):
Override the preroll vmethod instead of overriding the render method
twice.
Original commit message from CVS:
* gst-libs/gst/app/gstappsink.c: (gst_app_sink_base_init),
(gst_app_sink_class_init), (gst_app_sink_dispose),
(gst_app_sink_flush_unlocked), (gst_app_sink_start),
(gst_app_sink_stop), (gst_app_sink_event), (gst_app_sink_preroll),
(gst_app_sink_render), (gst_app_sink_get_caps),
(gst_app_sink_set_caps), (gst_app_sink_end_of_stream),
(gst_app_sink_pull_preroll), (gst_app_sink_pull_buffer):
* gst-libs/gst/app/gstappsink.h:
Make love to appsink.
Make it support pulling of the preroll buffer.
Add docs and debug statements.
Fix some races wrt to EOS handling and stopping.
Implement getcaps.
Implement FLUSHING.
API: gst_app_sink_pull_preroll()
Original commit message from CVS:
* docs/plugins/gst-plugins-bad-plugins.args:
Remove directsoundsink property doc as this sink use the mixer
interface now.
* docs/plugins/gst-plugins-bad-plugins.interfaces:
Add interfaces implemented by Windows sinks.
* sys/directsound/gstdirectsoundsink.c:
* sys/directsound/gstdirectsoundsink.h:
Remove directsoundsink property and implement the mixer interface.
* win32/vs6/gst_plugins_bad.dsw:
* win32/vs6/libgstdirectsound.dsp:
Update project files.
* gst-libs/gst/dshow/gstdshow.cpp:
* gst-libs/gst/dshow/gstdshow.h:
* gst-libs/gst/dshow/gstdshowfakesink.cpp:
* gst-libs/gst/dshow/gstdshowfakesink.h:
* gst-libs/gst/dshow/gstdshowfakesrc.cpp:
* gst-libs/gst/dshow/gstdshowfakesrc.h:
* gst-libs/gst/dshow/gstdshowinterface.cpp:
* gst-libs/gst/dshow/gstdshowinterface.h:
* win32/common/libgstdshow.def:
* win32/vs6/libgstdshow.dsp:
Add a new gst library which allow to create internal Direct Show
graph (pipelines) to wrap Windows sources, decoders or encoders.
It includes a DirectShow fake source and sink and utility functions.
* sys/dshowsrcwrapper/gstdshowaudiosrc.c:
* sys/dshowsrcwrapper/gstdshowaudiosrc.h:
* sys/dshowsrcwrapper/gstdshowsrcwrapper.c:
* sys/dshowsrcwrapper/gstdshowsrcwrapper.h:
* sys/dshowsrcwrapper/gstdshowvideosrc.c:
* sys/dshowsrcwrapper/gstdshowvideosrc.h:
* win32/vs6/libdshowsrcwrapper.dsp:
Add a new plugin to wrap DirectShow sources on Windows.
It gets data from any webcam, dv cam, micro. We could add
tv tunner card later.
Original commit message from CVS:
* gst-libs/gst/app/Makefile.am:
Use GST_ALL_LDFLAGS, which actually exists, but maybe David
can confirm that was what he wanted.
Original commit message from CVS:
* gst-libs/gst/app/Makefile.am:
* gst-libs/gst/app/gstappbuffer.c:
* gst-libs/gst/app/gstappbuffer.h:
* gst-libs/gst/app/gstappsrc.c:
Add GstAppBuffer that includes a callback and closure for
proper handling of data chunks.
Original commit message from CVS:
* gst-libs/gst/riff/riff-media.c:
(gst_riff_create_audio_caps_with_data):
Do actually fix invalid RIFF fmt header values for alaw
and mulaw audio instead of just saying so.
* gst/wavparse/gstwavparse.c: (gst_wavparse_fmt):
Give gst_riff_create_audio_caps_with_data() a chance to
fix up broken format header fields before extracting any
parameters from the header. (fixes#167633)
Original commit message from CVS:
* gst-libs/gst/riff/riff-media.c:
(gst_riff_create_video_caps_with_data):
Add extradata to huffyuv (fixes#165013).
* gst-libs/gst/riff/riff-read.c:
(gst_riff_read_strf_vids_with_data):
Fix extradata extraction if it is in the chunk size.
Original commit message from CVS:
* gst-libs/gst/riff/riff-read.c: (gst_riff_peek_element_data),
(gst_riff_read_element_data):
* gst-libs/gst/riff/riff-read.h:
Add _peek version (req'ed in CDXA).
* gst/cdxaparse/gstcdxaparse.c: (gst_cdxaparse_init),
(gst_cdxaparse_loop):
Fix parsing in playbin.
* gst/playback/gstdecodebin.c: (close_pad_link):
Ignore current_ pads, they cause major annoyance.
Original commit message from CVS:
* gst-libs/gst/riff/riff-read.c: (gst_riff_read_use_event):
Don't bail on unknown events.
* gst/audioscale/gstaudioscale.c: (gst_audioscale_chain):
Don't crash on events before negotiation.
* gst/avi/gstavidemux.c: (gst_avi_demux_add_stream):
Send tags on pads, too.
* gst/playback/gststreamselector.c:
(gst_stream_selector_request_new_pad):
Forward events on first pad if no input was selected yet.
Original commit message from CVS:
* gst-libs/gst/riff/riff-ids.h:
* gst/wavenc/riff.h:
Add AMR (VBR and CBR) ids to riff.h audio codec list
* gst/asfdemux/gstasfdemux.c:
(gst_asf_demux_process_ext_content_desc),
(gst_asf_demux_process_object):
Retrieve more tags from ASF files (Genre, AlbumTitle, Artist)
Original commit message from CVS:
Reviewed by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
* gst-libs/gst/resample/resample.c: (gst_resample_sinc_ft_s16):
Fix invalid memory access (#159211).
Original commit message from CVS:
* gst-libs/gst/riff/riff-media.c:
(gst_riff_create_video_caps_with_data):
Add BLZ0 (Blizzard's version of DivX) fourcc.
Original commit message from CVS:
* configure.ac: add audioresample and cairo plugins. Remove
HAVE_MMX stuff, because it's not used.
* ext/Makefile.am: same
* ext/audioresample/Makefile.am: You are not ready for an
audio resampling element based on audioresample.
* ext/audioresample/gstaudioresample.c:
* ext/audioresample/gstaudioresample.h:
* ext/cairo/Makefile.am: You are not ready for overlay elements
based on cairo. Don't look too closely, these elements kinda
suck right now.
* ext/cairo/gstcairo.c: new
* ext/cairo/gsttextoverlay.c: new
* ext/cairo/gsttextoverlay.h: new
* ext/cairo/gsttimeoverlay.c: new
* ext/cairo/gsttimeoverlay.h: new
* gst-libs/gst/media-info/media-info-priv.h: fix compile
problem with compilers that don't support variadic macros.
Original commit message from CVS:
* gst/asfdemux/README
* gst/wavenc/riff.h
* gst-libs/gst/riff/riff-ids.h
* gst-libs/gst/riff/riff-media.c
add new 4CC codes for h263 related codecs
fixes partially bug #155163
Original commit message from CVS:
* ext/faad/gstfaad.c: (gst_faad_chanpos_from_gst),
(gst_faad_chanpos_to_gst), (gst_faad_chain):
Set DURATION even if source buffer didn't. Also use increasing
timestamps.
* gst-libs/gst/riff/riff-media.c:
(gst_riff_create_audio_caps_with_data):
Block_align can have larger values than 8192.
Original commit message from CVS:
* ext/esd/esdsink.c: (gst_esdsink_chain):
Make error actually say something useful (fixes#156798).
* gst-libs/gst/riff/riff-media.c:
(gst_riff_create_video_caps_with_data),
(gst_riff_create_video_template_caps):
Add Intel Video 5.0 fourcc (IV50).
Original commit message from CVS:
Reviewed by: Ronald S. Bultje <rbultje@ronald.bitfreak.net>
* gst-libs/gst/riff/riff-read.c: (gst_riff_read_use_event):
Don't forward DISCONT events (fixes#159684).
Original commit message from CVS:
2004-11-27 Martin Soto <martinsoto@users.sourceforge.net>
* gst-libs/gst/audio/audioclock.c (gst_audio_clock_set_active)
(gst_audio_clock_get_internal_time):
Fix active <-> inactive transitions: ensure time value always
grows and avoid abrupt value changes.
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_get_caps_internal):
buffer-frames property was missing
* ext/arts/gst_arts.c:
rate missing from sinkcaps
* ext/audiofile/gstafparse.c:
* ext/audiofile/gstafsink.c:
* ext/audiofile/gstafsrc.c:
* ext/swfdec/gstswfdec.c:
int audio doesn't know buffer-frames
* ext/cdparanoia/gstcdparanoia.c:
int audio doesn't know chunksize either
* ext/nas/nassink.c:
it's endianness, not endianess
* gst-libs/gst/audio/audio.h:
make float standard pad template caps really describe float
* gst/law/mulaw.c: (linear_factory):
signed only, please
* gst/mpegstream/gstdvddemux.c:
widths of 20 are not valid
Original commit message from CVS:
* ext/dv/gstdvdec.c: (gst_dvdec_handle_sink_event):
Set EOS on the element when processing an EOS event.
* ext/speex/gstspeexdec.h:
* ext/speex/gstspeexenc.h:
Only keep a const ptr to the mode
* gst-libs/gst/riff/riff-media.c:
(gst_riff_create_audio_caps_with_data),
(gst_riff_create_audio_template_caps):
Allow WMAV3, with up to 6 channels.
* gst/asfdemux/gstasfmux.c: (gst_asfmux_request_new_pad):
Don't call gst_pad_set_event_function on a sink pad.
* gst/mpegstream/gstdvddemux.c:
(gst_dvd_demux_get_subpicture_stream),
(gst_dvd_demux_set_cur_audio), (gst_dvd_demux_set_cur_subpicture):
Copy the explicit caps that were set across to the cur_* pads,
instead of trying to use a possibly non-existent negotiated caps.
Reset the type of subpicture pads to UNKNOWN after calling init_stream,
so that the caps get set.
Original commit message from CVS:
2004-10-28 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* gst-libs/gst/audio/gstaudiofilter.c: (gst_audiofilter_link):
fix build
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiofilter.c: (gst_audiofilter_link):
fix link function to always query channels and query width for
floats
* configure.ac:
add equalizer dir
* gst/equalizer/Makefile.am:
* gst/equalizer/gstiirequalizer.c: (gst_iir_equalizer_get_type),
(gst_iir_equalizer_base_init), (gst_iir_equalizer_class_init),
(gst_iir_equalizer_init), (gst_iir_equalizer_finalize),
(arg_to_scale), (setup_filter),
(gst_iir_equalizer_compute_frequencies),
(gst_iir_equalizer_set_property), (gst_iir_equalizer_get_property),
(gst_iir_equalizer_filter_inplace), (gst_iir_equalizer_setup),
(plugin_init):
add an equalizer
Original commit message from CVS:
* gst/wavparse/gstwavparse.c:
add ATRAC3 to STATIC CAPS to fix a warning
* gst/matroska/ebml-read.c:
* gst-libs/gst/riff/riff-read.c:
fix typos
Original commit message from CVS:
* gst-libs/gst/riff/riff-media.c:
(gst_riff_create_video_caps_with_data),
(gst_riff_create_video_template_caps):
Add wing commander format mimetype/fourccs.
* gst/avi/gstavidemux.c: (gst_avi_demux_massage_index):
Don't crash if some value is 0.
Original commit message from CVS:
* gst-libs/gst/riff/riff-media.c:
(gst_riff_create_video_caps_with_data),
(gst_riff_create_video_template_caps):
Add DIB fourcc (raw, palettized 8-bit RGB).
* gst-libs/gst/riff/riff-read.c:
(gst_riff_read_strf_vids_with_data):
Oops, fix strf_data reading bug.
* gst/avi/gstavidemux.c: (gst_avi_demux_add_stream):
Use a non-NULL tag.
* gst/qtdemux/qtdemux.c: (qtdemux_parse_trak):
Time for hacks. Sorry Dave. At least one quicktime movie (a
trailer) that I've encountered contains multiple video tracks.
One of those is the actual video track, the other are one-frame
tracks (images). Unfortunately, the number of frames according
to the trak header is 1 for each, so that doesn't help. So
instead, I look at the duration and discard tracks with a
duration shorter than 20% of the length of the stream. Better
than nothing.
Original commit message from CVS:
* gst-libs/gst/riff/riff-media.c:
(gst_riff_create_video_caps_with_data),
(gst_riff_create_audio_caps_with_data):
Add codec_data handling (like asfdemux used to do).
* gst/asfdemux/gstasf.c: (plugin_init):
* gst/asfdemux/gstasfdemux.c: (gst_asf_demux_base_init),
(gst_asf_demux_add_audio_stream), (gst_asf_demux_add_video_stream):
Use riff-media for caps creation instead of our own (mostly
broken) copy of its functions.
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c: (dvdreadsrc_class_init),
(dvdreadsrc_init), (dvdreadsrc_dispose), (dvdreadsrc_set_property),
(dvdreadsrc_get_property), (_open), (_seek), (_read),
(dvdreadsrc_get), (dvdreadsrc_open_file),
(dvdreadsrc_change_state):
Fix. Don't do one big huge loop around the whole DVD, that will
cache all data and thus eat sizeof(dvd) (several GB) before we
see something.
* gst-libs/gst/riff/riff-read.c: (gst_riff_read_seek):
Actually NULL'ify event after using it.
* gst/matroska/ebml-read.c: (gst_ebml_read_use_event),
(gst_ebml_read_handle_event), (gst_ebml_read_element_id),
(gst_ebml_read_element_length), (gst_ebml_read_element_data),
(gst_ebml_read_seek), (gst_ebml_read_skip):
Handle events.
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_base_init),
(gst_dvd_demux_init), (gst_dvd_demux_get_audio_stream),
(gst_dvd_demux_get_subpicture_stream), (gst_dvd_demux_plugin_init):
Fix timing (this will probably break if I seek using menus, but
I didn't get there yet). VOBs and normal DVDs should now work.
Add a mpeg2-only pad with high rank so this get autoplugged for
MPEG-2 movies.
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_base_init),
(gst_mpeg_demux_class_init), (gst_mpeg_demux_init),
(gst_mpeg_demux_new_output_pad), (gst_mpeg_demux_get_video_stream),
(gst_mpeg_demux_get_audio_stream),
(gst_mpeg_demux_get_private_stream), (gst_mpeg_demux_parse_packet),
(gst_mpeg_demux_parse_pes), (gst_mpeg_demux_plugin_init):
Use this as second rank for MPEG-1 and MPEG-2. Still use this for
MPEG-1 but use dvddemux for MPEG-2.
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_class_init),
(gst_mpeg_parse_init), (gst_mpeg_parse_new_pad),
(gst_mpeg_parse_parse_packhead):
Timing. Only add pad template if it exists. Add sink template from
class and not from ourselves. This means we will always use the
correct sink template even if it is not the one defined in this
file.
Original commit message from CVS:
* ext/flac/gstflacdec.c: (gst_flacdec_src_query):
Only return true if we actually filled something in. Prevents
player applications from showing a random length for flac files.
* gst-libs/gst/riff/riff-read.c: (gst_riff_read_class_init),
(gst_riff_read_use_event), (gst_riff_read_handle_event),
(gst_riff_read_seek), (gst_riff_read_skip), (gst_riff_read_strh),
(gst_riff_read_strf_vids_with_data),
(gst_riff_read_strf_auds_with_data), (gst_riff_read_strf_iavs):
OK, ok, so I implemented event handling. Apparently it's normal
that we receive random events at random points without asking
for it.
* gst/avi/gstavidemux.c: (gst_avi_demux_reset),
(gst_avi_demux_src_convert), (gst_avi_demux_handle_src_query),
(gst_avi_demux_handle_src_event), (gst_avi_demux_stream_index),
(gst_avi_demux_sync), (gst_avi_demux_stream_scan),
(gst_avi_demux_massage_index), (gst_avi_demux_stream_header),
(gst_avi_demux_handle_seek), (gst_avi_demux_process_next_entry),
(gst_avi_demux_stream_data), (gst_avi_demux_loop):
* gst/avi/gstavidemux.h:
Implement non-lineair chunk handling and subchunk processing.
The first solves playback of AVI files where the audio and video
data of individual buffers that we read are not synchronized.
This should not happen according to the wonderful AVI specs, but
of course it does happen in reality. It is also a prerequisite for
the second. Subchunk processing allows us to cut chunks in small
pieces and process each of these pieces separately. This is
required because I've seen several AVI files with incredibly large
audio chunks, even some files with only one audio chunk for the
whole file. This allows for proper playback including seeking.
This patch is supposed to fix all AVI A/V sync issues.
* gst/flx/gstflxdec.c: (gst_flxdec_class_init),
(flx_decode_chunks), (flx_decode_color), (gst_flxdec_loop):
Work.
* gst/modplug/gstmodplug.cc:
Proper return value setting for the query() function.
* gst/playback/gstplaybasebin.c: (setup_source):
Being in non-playing state (after, e.g., EOS) is not necessarily
a bad thing. Allow for that. This fixes playback of short files.
They don't actually playback fully now, because the clock already
runs. This means that small files (<500kB) with a small length
(<2sec) will still not or barely play. Other files, such as mod
or flx, will work correctly, however.
Original commit message from CVS:
* ext/dirac/Makefile.am:
* ext/dirac/gstdirac.cc:
* ext/dirac/gstdiracdec.cc:
* ext/dirac/gstdiracdec.h:
Do something. Don't actually know if this works because I don't
have a demuxer yet.
* ext/gsm/gstgsmdec.c: (gst_gsmdec_getcaps):
Add channels=1 to caps returned from _getcaps().
* ext/ogg/gstogmparse.c: (gst_ogm_audio_parse_get_type),
(gst_ogm_video_parse_get_type), (gst_ogm_audio_parse_base_init),
(gst_ogm_video_parse_base_init), (gst_ogm_parse_init),
(gst_ogm_audio_parse_init), (gst_ogm_video_parse_init),
(gst_ogm_parse_sink_convert), (gst_ogm_parse_chain),
(gst_ogm_parse_change_state):
Separate between audio/video so ogmaudioparse actually uses the
audio pad templates. Both audio and video work now, including
autoplugging. Also use sometimes-srcpad hack.
* gst-libs/gst/riff/riff-read.c: (gst_riff_read_seek):
Handle events better. Don't hang on infinite loops.
* gst/avi/gstavidemux.c: (gst_avi_demux_class_init),
(gst_avi_demux_init), (gst_avi_demux_reset),
(gst_avi_demux_src_convert), (gst_avi_demux_handle_src_query),
(gst_avi_demux_stream_header), (gst_avi_demux_stream_data),
(gst_avi_demux_change_state):
* gst/avi/gstavidemux.h:
Improve A/V sync. Still not perfect.
* gst/matroska/ebml-read.c: (gst_ebml_read_seek),
(gst_ebml_read_skip):
Handle events better.
* gst/qtdemux/qtdemux.c: (gst_qtdemux_handle_sink_event),
(gst_qtdemux_loop_header), (qtdemux_parse_trak),
(qtdemux_audio_caps):
Add IMA4. Improve event handling. Save offset after a seek when
the headers are at the end of the file so that we don't end up in
an infinite loop.
* gst/typefind/gsttypefindfunctions.c: (qt_type_find):
Add low-priority typefind support for files with no length.
Original commit message from CVS:
2004-08-24 Sebastien Cote <sc5@hermes.usherb.ca>
* gst-libs/gst/riff/riff-read.c: (gst_riff_peek_head),
(gst_riff_read_element_data), (gst_riff_read_seek),
(gst_riff_read_skip): fix infinite loop in wavparse, fixes bug
#144616, patch reviewed by Ronald and committed by Christophe Fergeau
<teuf@gnome.org>
Original commit message from CVS:
Remove GPL'ed mmx32idct.c code and supporting code, since logic in gst-plugins
is not supposed to be GPL'ed. This code provided MMX optimisations, but was
never compiled in since configure never set HAVE_LIBMMX anyway.
Original commit message from CVS:
* gst-libs/gst/riff/riff-media.c:
(gst_riff_create_audio_caps_with_data):
Fix double end-to-native symbol conversion (#148021).
Original commit message from CVS:
* gst-libs/gst/riff/riff-read.c:
(gst_riff_read_strf_vids_with_data),
(gst_riff_read_strf_auds_with_data):
* gst/avi/gstavidemux.c: (gst_avi_demux_handle_src_query),
(gst_avi_demux_add_stream), (gst_avi_demux_stream_header):
Make sure we don't create 0 sized subbufers in riff-read.
Signal the no more pads signal after reading the avi header.
Original commit message from CVS:
* gst-libs/gst/video/video.h:
Added 32 bits RGBA. Not sure if we should use another mime-type
for alpha rgb. Currently the presence of the alpha_mask property
signals an alpha channel. Ronald?
Original commit message from CVS:
* gst-libs/gst/riff/riff-media.c:
(gst_riff_create_video_caps_with_data):
mp42/mp43 (no caps) exist too.
* gst/matroska/matroska-demux.c: (gst_matroska_demux_video_caps):
Set pixel_width/height; we've got them in-caps.
* gst/typefind/gsttypefindfunctions.c: (plugin_init):
* gst/wavparse/gstwavparse.c: (plugin_init):
Both are valid primary.
* sys/oss/gstossmixer.c:
Remove i18n hack and enable translations.
Original commit message from CVS:
* gst-libs/gst/riff/riff-media.c: (gst_riff_create_audio_caps),
(gst_riff_create_video_template_caps):
Fix the template caps to include some more media types.
Original commit message from CVS:
* gst-libs/gst/play/play.c: (gst_play_pipeline_setup),
(gst_play_get_length_callback), (gst_play_set_location),
(gst_play_seek_to_time), (gst_play_set_data_src),
(gst_play_set_video_sink), (gst_play_set_audio_sink),
(gst_play_set_visualization), (gst_play_connect_visualization),
(gst_play_get_sink_element):
- add debugging info
- fix looking up sink elements by iterating over complete caps
- put everything except for source and autoplugger in a complete bin
Original commit message from CVS:
* gst-libs/gst/colorbalance/Makefile.am:
* gst-libs/gst/mixer/Makefile.am:
* gst-libs/gst/play/Makefile.am:
* gst-libs/gst/tuner/Makefile.am:
* gst/tcp/Makefile.am:
* sys/dxr3/Makefile.am:
don't include -enumtypes.[ch] or -marshal.[ch] files in the disted
tarball.
Also add all *.list files that were missing.
* Makefile.am:
add a distcheck hook to ensure the above doesn't happen again.
Original commit message from CVS:
2004-06-15 Zaheer Abbas Merali <zaheerabbas at merali.org>
fixed a potential leak with previous commit
* gst-libs/gst/riff/riff-read.c: (gst_riff_peek_head):
Original commit message from CVS:
2004-06-15 Zaheer Abbas Merali <zaheerabbas at merali.org>
* gst-libs/gst/riff/riff-read.c: (gst_riff_peek_head):
Added missing refcount, fixes bug #144425
Cheers Tim for finding the bug
Original commit message from CVS:
* gst-libs/gst/tuner/tunerchannel.h:
- add a freq_multiplicator field to make the conversion
between internal frequency unit and Hz
* sys/v4l/gstv4lelement.c:
* sys/v4l2/gstv4l2element.c:
- change default video device to /dev/video0
* sys/v4l/v4l_calls.c:
* sys/v4l2/v4l2_calls.c:
- we only expose frequency to the user in Hz instead of
bastard v4lX unit (either 62.5kHz or 62.5Hz)
Original commit message from CVS:
* ext/vorbis/vorbisdec.c: (vorbis_dec_chain):
Initialise b_o_s and e_o_s variables
* gst-libs/gst/riff/riff-media.c:
(gst_riff_create_video_caps_with_data):
Add some unusual fourcc's from mplayer avi's
* gst/multipart/multipartmux.c: (gst_multipart_mux_plugin_init):
Make the muxer have rank GST_RANK_NONE, so it doesn't mess up
autoplugging.
Original commit message from CVS:
third batch :
remove ',' at end of enums as they could confuse older gcc, foreign compilers (forte) and gtk-doc
(in gst-plugins/gst-libs/ this time)
Original commit message from CVS:
* gst-libs/gst/resample/resample.c: (gst_resample_sinc_ft_s16),
(gst_resample_sinc_ft_float): Remove use of static temporary
buffer. This code was obviously not supposed to last long, but
it's stuck in our ABI, so it required a little hack to make it
ABI-compatible. Fixes#142585.
* gst-libs/gst/resample/resample.h: same.
Original commit message from CVS:
reviewed by: Ronald Bultje <rbultje@ronald.bitfreak.net>
* gst-libs/gst/audio/audioclock.c:
Fix wrong return type (#142205).
Original commit message from CVS:
* gst-libs/gst/riff/riff-read.c :
- fix INFO tag extraction in RIFF/AVI files
because gst_event_unref (event) also freed taglist
- avoid a mem leak
Original commit message from CVS:
* gst-libs/gst/riff/riff-ids.h :
- add CDXA to the list of RIFF types
- add plst (playlist ?) to wav chunk list (only diff with wavparse/riff.h)
Original commit message from CVS:
* gst/auparse/gstauparse.c:
fixes a-law, adds mu-law, linear pcm (8,16,24,32), ieee (32, 64)
only unsupported formats are ADPCM/CCITT G.72x
reviewed by Ronald
* gst-libs/gst/audio/audio.h:
adds 24bit depth to PCM (x-raw-int)
Original commit message from CVS:
* gst-libs/gst/riff/riff-media.c:
(gst_riff_create_video_caps_with_data),
(gst_riff_create_audio_caps),
(gst_riff_create_audio_template_caps):
* gst-libs/gst/riff/riff-read.c: (gst_riff_peek_head):
Fix for unaligned RIFF files (i.e. where all the chunks together
in a LIST chunk are not of the same size as the size given in
the LIST chunk header). Fixes several odd WAVE files. Also fix
ADPCM (block_align property) in audio, so that wavparse based
on this works now as it used to stand-alone.
Original commit message from CVS:
Rewrote wavparse to use riff-read instead of doing bytestream stuff by hand.
Made some useful functions in riff-read non-static.
Original commit message from CVS:
* gst-libs/gst/riff/riff-media.c: (gst_riff_create_audio_caps):
audio/x-raw-int with height rules! not. Now it's depth.
Original commit message from CVS:
* gst-libs/gst/riff/riff-media.c:
(gst_riff_create_video_caps_with_data):
mpegversion is an int
* sys/v4l/gstv4lsrc.c: (gst_v4lsrc_base_init):
don't try to create pad templates with NULL caps, use any caps
instead.
Original commit message from CVS:
* gconf/Makefile.am: Fix for non-GNU make
* gst-libs/gst/Makefile.am: Change directory order to handle
GstPlay linking with gstinterfaces
* gst-libs/gst/audio/make_filter: make use of tr portable
* gst-libs/gst/play/Makefile.am: Add intended \
* gst-libs/gst/xwindowlistener/xwindowlistener.c:
(gst_xwin_set_clips): Switch to ISO variadic macro. Use a
function prototype instead of void *.
* gst/ffmpegcolorspace/gstffmpegcodecmap.c: Switch to ISO variadic
macro.
* gst/ffmpegcolorspace/gstffmpegcolorspace.c:
(gst_ffmpegcolorspace_chain): wrap NULL in GST_ELEMENT_ERROR call
* gst/videofilter/make_filter: make use of tr portable
* pkgconfig/Makefile.am: Remove GNU extension in Makefile target
Original commit message from CVS:
* gst-libs/gst/riff/riff-media.c:
(gst_riff_create_video_caps_with_data):
Add div[3456] as fourccs for DivX 3 (fixes#140137).
Original commit message from CVS:
reviewed by: <delete if not using a buddy>
* gst-libs/gst/riff/riff-media.c:
(gst_riff_create_video_caps_with_data),
(gst_riff_create_video_caps), (gst_riff_create_audio_caps),
(gst_riff_create_video_template_caps),
(gst_riff_create_audio_template_caps):
* gst-libs/gst/riff/riff-media.h:
* gst-libs/gst/riff/riff-read.c:
(gst_riff_read_strf_vids_with_data), (gst_riff_read_strf_vids):
* gst-libs/gst/riff/riff-read.h:
* gst/avi/gstavidemux.c: (gst_avi_demux_add_stream):
Add MS RLE support. I added some functions to read out strf chunks
into strf chunks and the data behind it. This is usually color
palettes (as in RLE, but also in 8-bit RGB). Also use those during
caps creation. Lastly, add ADPCM (similar to wavparse - which
should eventually be rifflib based).
* gst/matroska/matroska-demux.c: (gst_matroska_demux_class_init),
(gst_matroska_demux_init), (gst_matroska_demux_reset):
* gst/matroska/matroska-demux.h:
Remove placeholders for some prehistoric tagging system. Didn't add
support for any tag system really anyway.
* gst/qtdemux/qtdemux.c:
Add support for audio/x-m4a (MPEG-4) through spider.
* gst/wavparse/gstwavparse.c: (gst_wavparse_parse_fmt),
(gst_wavparse_loop):
ADPCM support (#135862). Increase max. buffer size because we
cannot split buffers for ADPCM (screws references) and I've seen
files with 2048 byte chunks. 4096 seems safe for now.
Original commit message from CVS:
* gst-libs/gst/riff/riff-media.c: (gst_riff_create_video_caps):
Fix typo in divxversion (3 instead of 4 for "DIVX" fourcc).
Original commit message from CVS:
* gst-libs/gst/riff/riff-media.c: (gst_riff_create_video_caps),
(gst_riff_create_video_template_caps):
Add MS video v1.
* gst/avi/gstavidemux.c: (gst_avi_demux_stream_index),
(gst_avi_demux_stream_data):
Add support for "rec-list" chunks.
Original commit message from CVS:
* gst-libs/gst/riff/riff-media.c: (gst_riff_create_video_caps):
Fix divx caps mismatch and move from video/x-jpeg to image/jpeg
so that MJPEG plays back.
Original commit message from CVS:
* gst-libs/gst/play/play.c (gst_play_audio_fixate)
(gst_play_video_fixate): Check so the structure has the field
before trying to fixate them, this makes it possible to have
fakesinks for video and audio output without printing errors on
the output console.
Original commit message from CVS:
2004-03-15 Julien MOUTTE <julien@moutte.net>
* gst-libs/gst/play/play.c: (gst_play_get_framerate),
(gst_play_get_sink_element): First draft of gst_play_get_framerate.
* gst-libs/gst/play/play.h:
Original commit message from CVS:
* configure.ac:
* gst-libs/gst/gconf/Makefile.am:
* pkgconfig/Makefile.am:
move gstreamer-gconf pkgconfig files to pkgconfig/ dir. Make sure
they get rebuilt properly
* configure.ac:
when checking for vorbis, try pkgconfig first.
* gst/modplug/gstmodplug.cc:
add fixate function
Original commit message from CVS:
* gst-libs/gst/xoverlay/xoverlay.c: (gst_x_overlay_set_xwindow_id),
(gst_x_overlay_got_xwindow_id):
* gst-libs/gst/xoverlay/xoverlay.h:
replace XID with unsigned long to get rid of the xlibs dependency in
XOverlay (fixes#137004)
Original commit message from CVS:
* ext/lcs/Makefile.am: Fix so that the lcs colorspace plugin
doesn't conflict with the internal colorspace plugin.
* gst-libs/gst/audio/make_filter: Use `` instead of $() to
satisfy the crappy-ass shell shipped by a certain vendor.
* gst/videofilter/make_filter: same (bug #135299)
Original commit message from CVS:
* ext/faad/gstfaad.c: (gst_faad_init), (gst_faad_srcgetcaps),
(gst_faad_chain): Fix negotiation.
* ext/librfb/gstrfbsrc.c: (gst_rfbsrc_handle_src_event): Add
key and button events.
* gst-libs/gst/floatcast/floatcast.h: Fix a minor bug in this
dung heap of code.
* gst-libs/gst/gconf/gstreamer-gconf-uninstalled.pc.in: gstgconf
depends on gconf
* gst-libs/gst/gconf/gstreamer-gconf.pc.in: same
* gst-libs/gst/play/play.c: (gst_play_pipeline_setup),
(gst_play_video_fixate), (gst_play_audio_fixate): Add a fixate
function to encourage better negotiation, particularly between
audioconvert and osssink.
* gst/audioconvert/gstaudioconvert.c: (gst_audio_convert_chain):
* gst/qtdemux/qtdemux.c: (qtdemux_parse_trak): Make some debugging
more important.
* gst/typefind/gsttypefindfunctions.c: Fix mistake in flash
typefinding.
* gst/vbidec/vbiscreen.c: Add glib header
* pkgconfig/gstreamer-play.pc.in: Depends on gst-interfaces.
Original commit message from CVS:
2004-03-03 Julien MOUTTE <julien@moutte.net>
* gst-libs/gst/gconf/gconf.c: (gst_gconf_get_default_video_sink):
Using ximagesink as a default if no gconf key found. We should
probably consider using alsasink instead of osssink for the audio
part.
Original commit message from CVS:
2004-02-27 Benjamin Otte <otte@gnome.org>
* gst-libs/gst/audio/audio.h:
add macro to make sure header isn't included twice
* gst/asfdemux/gstasfdemux.c: (gst_asf_demux_process_chunk):
don't use gst_buffer_free
* gst/playondemand/filter.func:
don't usae gst_data_free. Free data only once.
Original commit message from CVS:
* gst-libs/gst/colorbalance/Makefile.am:
* gst-libs/gst/mixer/Makefile.am:
* gst-libs/gst/tuner/Makefile.am:
* gst/level/Makefile.am: -marshal.[ch] and -enum.[ch] files
should not be disted, -marshal.h files should not be installed,
and -enum.h files _should_ be installed. Fix to make this the
case.
Original commit message from CVS:
2004-02-15 Julien MOUTTE <julien@moutte.net>
* examples/gstplay/player.c: (got_eos), (main): Adding some
output for debugging.
* gst-libs/gst/play/play.c: (gst_play_state_change): Stop our
timeouts if we go to any state different from PLAYING.
* gst-libs/gst/riff/riff-read.c: (gst_riff_read_seek): Fix some
more EOS bugs in riff lib.
Original commit message from CVS:
2004-02-14 Julien MOUTTE <julien@moutte.net>
* gst-libs/gst/play/play.c: (gst_play_connect_visualization): Disable
visualization until i find a way to fix switch correctly.
* gst-libs/gst/riff/riff-read.c: (gst_riff_peek_head): Fix a bug when
EOS arrives.
* gst/switch/gstswitch.c: (gst_switch_release_pad),
(gst_switch_request_new_pad), (gst_switch_poll_sinkpads),
(gst_switch_loop), (gst_switch_dispose), (gst_switch_class_init):
Reworked switch to get a more correct behaviour with events and refing
of data stored in sinkpads.
* gst/switch/gstswitch.h: Adding an eos flag for every sinkpad so that
we don't pull from a pad in EOS.
Original commit message from CVS:
2004-02-08 Benjamin Otte <in7y118@public.uni-hamburg.de>
* gst-libs/gst/colorbalance/Makefile.am:
* gst-libs/gst/navigation/Makefile.am:
* gst-libs/gst/xoverlay/Makefile.am:
remove unused GST_OPT_CFLAGS from Makefiles
include X_CFLAGS and X_LIBS in xoverlay. (#131948)
Original commit message from CVS:
2004-02-05 Benjamin Otte <in7y118@public.uni-hamburg.de>
* gst-libs/gst/riff/riff-read.c: (gst_riff_read_info):
use correct GST_TAG_ENCODER tag
Original commit message from CVS:
2004-02-04 Julien MOUTTE <julien@moutte.net>
* gst-libs/gst/xoverlay/xoverlay.c: (gst_x_overlay_expose):
* gst-libs/gst/xoverlay/xoverlay.h: Adding the _expose method to tell
an overlay to redraw the image because it has been exposed.
* sys/ximage/ximagesink.c: (gst_ximagesink_ximage_destroy),
(gst_ximagesink_ximage_put), (gst_ximagesink_expose),
(gst_ximagesink_xoverlay_init), (gst_ximagesink_init):
* sys/ximage/ximagesink.h: Implement expose method from XOverlay
interface
* sys/xvimage/xvimagesink.c: (gst_xvimagesink_xvimage_destroy),
(gst_xvimagesink_xvimage_put), (gst_xvimagesink_expose),
(gst_xvimagesink_xoverlay_init), (gst_xvimagesink_init):
* sys/xvimage/xvimagesink.h: Implement expose method from XOverlay
interface
Original commit message from CVS:
* gst-libs/gst/audio/.cvsignore:
Ignore generated file.
* gst-libs/gst/audio/Makefile.am:
Do not install example filter.
Original commit message from CVS:
2004-02-02 Julien MOUTTE <julien@moutte.net>
* gst-libs/gst/play/play.c: (gst_play_pipeline_setup),
(gst_play_set_audio_sink): Moving volume in the audio thread for
instantaneous volume change. Maybe i will add another volume in front
of visualization later, not sure yet though.
Original commit message from CVS:
2004-01-30 Ronald Bultje <rbultje@ronald.bitfreak.net>
* gst-libs/gst/riff/riff-read.c: (gst_riff_peek_head),
(gst_riff_read_seek):
* gst/matroska/ebml-read.c: (gst_ebml_read_element_id),
(gst_ebml_read_seek):
Fix event handling.
Original commit message from CVS:
2004-01-29 Julien MOUTTE <julien@moutte.net>
* ext/gnomevfs/gstgnomevfssrc.c: (gst_gnomevfssrc_get): Fixing seeking
emiting FLUSH and even before DISCONT.
* gst-libs/gst/play/gstplay.c: (gst_play_seek_to_time): Fix seeking to
get the best instant seeking as possible yay!
Original commit message from CVS:
2004-01-28 Julien MOUTTE <julien@moutte.net>
* gst-libs/gst/play/gstplay.c: (gst_play_seek_to_time): seek on video
sink element first.
* gst/videoscale/gstvideoscale.c:
(gst_videoscale_handle_src_event): Fixing src event handler.
Original commit message from CVS:
2004-01-27 Julien MOUTTE <julien@moutte.net>
* gst-libs/gst/play/gstplay.c: (gst_play_tick_callback),
(gst_play_seek_to_time): Fixing the way to get current position.
Original commit message from CVS:
2004-01-26 Benjamin Otte <in7y118@public.uni-hamburg.de>
* gst-libs/gst/audio/audio.h:
remove buffer-frames from audio caps
* gst/audioconvert/gstaudioconvert.c:
fix plugin to really work.
Original commit message from CVS:
2004-01-25 Ronald Bultje <rbultje@ronald.bitfreak.net>
* gst-libs/gst/mixer/mixer.c:
* gst-libs/gst/propertyprobe/propertyprobe.c:
* gst-libs/gst/tuner/tuner.c: (gst_tuner_find_norm_by_name),
(gst_tuner_find_channel_by_name):
* gst-libs/gst/tuner/tuner.h:
Add gtk-doc style comments. Also fix a function name.
Original commit message from CVS:
2004-01-25 Julien MOUTTE <julien@moutte.net>
* gst-libs/gst/play/gstplay.c: (gst_play_pipeline_setup),
(gst_play_identity_handoff), (gst_play_set_location),
(gst_play_set_visualization), (gst_play_connect_visualization): Another
try in visualization implementation. Still have an issue with switch
blocking when pulling from video_queue and only audio comes out of
spider.
* gst/switch/gstswitch.c: (gst_switch_release_pad),
(gst_switch_poll_sinkpads), (gst_switch_class_init): Implementing pad
release method. And check if the pad is usable before pulling.
Original commit message from CVS:
2004-01-25 Ronald Bultje <rbultje@ronald.bitfreak.net>
* gst-libs/gst/riff/riff-read.c: (gst_riff_read_info):
Additional pad usability check.
* gst/mpeg1videoparse/gstmp1videoparse.c: (gst_mp1videoparse_init),
(mp1videoparse_find_next_gop), (gst_mp1videoparse_time_code),
(gst_mp1videoparse_real_chain):
Fix MPEG video stream parsing. The original plugin had several
issues, including not timestamping streams where the source was
not timestamped (this happens with PTS values in mpeg system
streams, but MPEG video is also a valid stream on its own so
that needs timestamps too). We use the display time code for that
for now. Also, if one incoming buffer contains multiple valid
frames, we push them all on correctly now, including proper EOS
handling. Lastly, several potential segfaults were fixed, and we
properly sync on new sequence/gop headers to include them in next,
not previous frames (since they're header for the next frame, not
the previous). Also see #119206.
* gst/mpegaudioparse/gstmpegaudioparse.c: (gst_mp3parse_chain),
(bpf_from_header):
Move caps setting so we only do it after finding several valid
MPEG-1 fraes sequentially, not right after the first one (which
might be coincidental).
* gst/typefind/gsttypefindfunctions.c: (mpeg1_sys_type_find),
(mpeg_video_type_find), (mpeg_video_stream_type_find),
(plugin_init):
Add unsynced MPEG video stream typefinding, and change some
probability values so we detect streams rightly. The idea is as
follows: I can have an unsynced system stream which contains
video. In the current code, I would randomly get a type for either
system or video stream type found, because the probabilities are
being calculated rather randomly. I now use fixed values, so we
always prefer system stream if that was found (and that is how it
should be). If no system stream was found, we can still identity
the stream as video-only.
Original commit message from CVS:
2004-01-23 Julien MOUTTE <julien@moutte.net>
* gst-libs/gst/play/gstplay.c: (gst_play_pipeline_setup),
(gst_play_set_location), (gst_play_seek_to_time),
(gst_play_set_audio_sink), (gst_play_set_visualization),
(gst_play_connect_visualization), (gst_play_get_sink_element): Reworked
the pipeline from scratch. Visualization is back and switch went out as
i realized it was not possible to use the way i wanted.
* sys/ximage/ximagesink.c: (gst_ximagesink_imagepool_clear),
(gst_ximagesink_change_state), (gst_ximagesink_dispose): Move xcontext
clearing in state change from READY to NULL. So that one can clean the
X ressources keeping the element.
* sys/xvimage/xvimagesink.c: (gst_xvimagesink_xcontext_get),
(gst_xvimagesink_imagepool_clear), (gst_xvimagesink_change_state),
(gst_xvimagesink_colorbalance_set_value),
(gst_xvimagesink_colorbalance_get_value),
(gst_xvimagesink_set_property), (gst_xvimagesink_dispose),
(gst_xvimagesink_init): Same xcontext cleaning than ximagesink in state
change from READY to NULL and fixed some stupid bugs in colorbalance
get/set values. Also added the following feature : when nobody tries to
set some values to the colorbalance levels before the xcontext is
grabbed, then when creating channels list from Xv attributes we set the
internal values to the Xv defaults. This way we handle buggy Xv drivers
that set default hue values far from the middle of the range (Thanks
to Jon Trowbridge for pointing that issue).
* sys/xvimage/xvimagesink.h: Adding a cb_changed boolean to know if
colorbalance levels have been set before xcontext is grabbed.
Original commit message from CVS:
2004-01-16 Ronald Bultje <rbultje@ronald.bitfreak.net>
* gst-libs/gst/Makefile.am:
restructure so having local patches works easier.
Original commit message from CVS:
* gst-libs/gst/audio/Makefile.am:
Add gstaudiofiltertemplate.c and building of gstaudiofilterexample.c
from the template.
* gst-libs/gst/audio/gstaudiofilter.c:
* gst-libs/gst/audio/gstaudiofilter.h:
Add bytes_per_sample and size and n_samples calculation.
* gst-libs/gst/audio/gstaudiofilterexample.c:
Remove, now autogenerated.
* gst-libs/gst/audio/gstaudiofiltertemplate.c:
Moved from gstaudiofilterexample, object name changed, code added
so that it actually works.
* gst-libs/gst/audio/make_filter:
Script to build an audiofilter subclass from the template.
* gst/colorspace/Makefile.am:
* gst/colorspace/yuv2yuv.c:
Remove file, since it's GPL, and we don't use it.
Original commit message from CVS:
2004-01-15 Julien MOUTTE <julien@moutte.net>
* ext/alsa/gstalsamixer.c: (gst_alsa_mixer_interface_init): Setting
mixer interface type to HARDWARE.
* gst-libs/gst/mixer/mixer.c: (gst_mixer_class_init): Adding a default
type to SOFTWARE.
* gst-libs/gst/mixer/mixer.h: Adding mixer interface type and macro.
* gst-libs/gst/mixer/mixertrack.h: Adding mixertrack flag SOFTWARE.
* gst/volume/gstvolume.c: (gst_volume_interface_supported),
(gst_volume_interface_init), (gst_volume_list_tracks),
(gst_volume_set_volume), (gst_volume_get_volume),
(gst_volume_set_mute), (gst_volume_mixer_init),
(gst_volume_dispose), (gst_volume_get_type), (volume_class_init),
(volume_init): Implementing mixer interface.
* gst/volume/gstvolume.h: Adding tracklist for mixer interface.
* sys/oss/gstosselement.c: (gst_osselement_get_type),
(gst_osselement_change_state): Removing some trailing commas in
structures.
* sys/oss/gstossmixer.c: (gst_ossmixer_interface_init): Setting mixer
interface type to HARDWARE.
* sys/v4l/gstv4lcolorbalance.c:
(gst_v4l_color_balance_interface_init): Setting colorbalance interface
type to HARDWARE.
* sys/v4l2/gstv4l2colorbalance.c:
(gst_v4l2_color_balance_interface_init): Setting colorbalance
interface type to HARDWARE.
* sys/xvimage/xvimagesink.c: (gst_xvimagesink_chain): use exactly the
same code than ximagesink for event handling.
Original commit message from CVS:
2004-01-14 Julien MOUTTE <julien@moutte.net>
* gst-libs/gst/colorbalance/colorbalance.c:
(gst_color_balance_class_init): Adding a default type.
* gst-libs/gst/colorbalance/colorbalance.h: Adding a macro to access
the type.
* gst/videofilter/gstvideobalance.c: (gst_videobalance_get_type),
(gst_videobalance_dispose), (gst_videobalance_class_init),
(gst_videobalance_init), (gst_videobalance_interface_supported),
(gst_videobalance_interface_init),
(gst_videobalance_colorbalance_list_channels),
(gst_videobalance_colorbalance_set_value),
(gst_videobalance_colorbalance_get_value),
(gst_videobalance_colorbalance_init): Implementing colorbalance
interface.
* gst/videofilter/gstvideobalance.h: Adding colorbalance channels
list.
* sys/ximage/ximagesink.c: (gst_ximagesink_set_xwindow_id): Fixing a
bug which was triggering a BadAccess X error when setting an overlay
before pad was really negotiated.
* sys/xvimage/xvimagesink.c: (gst_xvimagesink_colorbalance_init):
Using the colorbalance type macro.
Original commit message from CVS:
2004-01-14 Benjamin Otte <in7y118@public.uni-hamburg.de>
* gst-libs/gst/play/gstplay.c: (gst_play_tick_callback):
Query the audio element to get the time, not the clock. We're
interested in the element's time here.
Original commit message from CVS:
2004-01-13 Julien MOUTTE <julien@moutte.net>
* gst-libs/gst/colorbalance/colorbalance.h: Adding a type to the
colorbalance interface stating if it is hardware based or software
based.
* gst/videofilter/gstvideobalance.c: (gst_videobalance_planar411):
Removing a trailing comma.
* sys/xvimage/xvimagesink.c: (gst_xvimagesink_xcontext_get),
(gst_xvimagesink_colorbalance_init): Integrating a patch from Jon
Trowbridge <trow@ximian.com> querying Xv adaptor for min/max value as
the documentation seems to be wrong on the -1000 to 1000 interval.
Original commit message from CVS:
2004-01-12 Julien MOUTTE <julien@moutte.net>
* gst-libs/gst/colorbalance/colorbalancechannel.c:
(gst_color_balance_channel_dispose): Adding safety check in dispose
method.
* sys/xvimage/xvimagesink.c: (gst_xvimagesink_xcontext_get),
(gst_xvimagesink_xcontext_clear),
(gst_xvimagesink_interface_supported),
(gst_xvimagesink_colorbalance_list_channels),
(gst_xvimagesink_colorbalance_set_value),
(gst_xvimagesink_colorbalance_get_value),
(gst_xvimagesink_colorbalance_init), (gst_xvimagesink_get_type):
Adding colorbalance interface support to set XV parameters such as
HUE, BRIGHTNESS, CONTRAST, SATURATION.
* sys/xvimage/xvimagesink.h: Adding the channels list for colorbalance
interface.
Original commit message from CVS:
2004-01-12 Julien MOUTTE <julien@moutte.net>
* gst-libs/gst/play/gstplay.c: (gst_play_get_sink_element): When
analyzing the pads of an element the bin is mostly in READY state so
no caps were negotiated. This helper function needs to work with
_get_caps directly then. I was not freeing them though, added that to
fix the mem leak.
Original commit message from CVS:
Remove all usage of gst_pad_get_caps(), and replace it with
gst_pad_get_allowed_caps() or gst_pad_get_negotiated_cap().
Original commit message from CVS:
* ext/ffmpeg/gstffmpegcolorspace.c: (gst_ffmpegcsp_chain):
Implementing gst_pad_alloc_buffer to use optimized buffer allocation.
* gst-libs/gst/xoverlay/xoverlay.c:
(gst_x_overlay_got_desired_size): Updating doc for the xid being 0.
* gst/videoscale/gstvideoscale.c: (gst_videoscale_chain):
Implementing gst_pad_alloc_buffer to use optimized buffer allocation.
* gst/videotestsrc/gstvideotestsrc.c: (gst_videotestsrc_get):
Implementing gst_pad_alloc_buffer to use optimized buffer allocation.
* sys/ximage/ximagesink.c: (gst_ximagesink_chain),
(gst_ximagesink_buffer_free), (gst_ximagesink_buffer_alloc),
(gst_ximagesink_set_xwindow_id), (gst_ximagesink_init): Implementing
the bufferalloc_function to replace bufferpools, fixing the XOverlay
interface implementation to handle xid being 0 and fix some bugs
triggered by Benjamin's testcase.
* sys/xvimage/xvimagesink.c: (gst_xvimagesink_chain),
(gst_xvimagesink_buffer_free), (gst_xvimagesink_buffer_alloc),
(gst_xvimagesink_set_xwindow_id), (gst_xvimagesink_init): Implementing
the bufferalloc_function to replace bufferpools, fixing the XOverlay
interface implementation to handle xid being 0 and fix some bugs
triggered by Benjamin's testcase.
Original commit message from CVS:
2004-01-09 Ronald Bultje <rbultje@ronald.bitfreak.net>
* ext/divx/gstdivxenc.c: (gst_divxenc_init):
Use explicit caps - fix capsnego.
* ext/xvid/gstxviddec.c:
* ext/xvid/gstxvidenc.c:
Remove macro-inside-macro which caused compile errors.
* gst-libs/gst/riff/riff-read.c: (gst_riff_read_header):
Error out if it's not a RIFF file. Else we error out without
gst_element_error() which is not good...
Original commit message from CVS:
* examples/gstplay/Makefile.am: Adding the interface library.
* gst-libs/gst/play/Makefile.am: Adding the interface library.
* gst-libs/gst/play/gstplay.c: (gst_play_set_video_sink): Connecting tothe XOverlay size signal instead of GstVideoSink.
* gst-libs/gst/play/gstplay.h: Including the XOverlay interface to check GST_IS_X_OVERLAY before signal connect.
* gst-libs/gst/video/gstvideosink.c: (gst_videosink_class_init):
Removing the have_video_size signal.
* gst-libs/gst/video/gstvideosink.h: Removing the have_video_size signal and associated public method.
* sys/ximage/ximagesink.c: (gst_ximagesink_handle_xevents),
(gst_ximagesink_sinkconnect): Using XOverlay public method to fire size
signal.
* sys/xvideo/xvideosink.c: (gst_xvideosink_sinkconnect),
(gst_xvideosink_xwindow_new): Using XOverlay public method to fire size
signal.
* sys/xvimage/xvimagesink.c: (gst_xvimagesink_sinkconnect):
Using XOverlay public method to fire size signal.
Original commit message from CVS:
* ext/dv/gstdvdec.c: (gst_dvdec_loop):
Fix caps negotiation.
* ext/dvdnav/dvdnavsrc.c: (dvdnavsrc_class_init),
(dvdnavsrc_update_buttoninfo), (dvdnavsrc_get),
(dvdnavsrc_get_event_mask), (dvdnav_handle_navigation_event),
(dvdnavsrc_event):
* ext/mpeg2dec/gstmpeg2dec.c:
* gst-libs/gst/navigation/navigation.c:
(gst_navigation_send_key_event), (gst_navigation_send_mouse_event):
* gst-libs/gst/navigation/navigation.h:
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_handle_src_event):
* sys/ximage/ximagesink.c: (gst_ximagesink_handle_xevents):
* sys/xvimage/xvimagesink.c: (gst_xvimagesink_handle_xevents):
Super-simple first version of mouse and keyboard events. Clicking
on a DVD menu now works, although it may not take you where you
expected.
* gst/sine/gstsinesrc.c: (gst_sinesrc_src_fixate):
* gst/videotestsrc/gstvideotestsrc.c:
(gst_videotestsrc_src_fixate):
These fixate functions were broken - they never actually
fixated :)
Original commit message from CVS:
2004-01-06 Ronald Bultje <rbultje@ronald.bitfreak.net>
* ext/shout/gstshout.c: (gst_icecastsend_base_init),
(gst_icecastsend_init):
fix for new caps system.
* gst-libs/gst/mixer/mixertrack.h:
* sys/oss/gstossmixer.c: (gst_ossmixer_build_list):
Add 'master track' flag (for tools like ACME that only want to
change the main volume).
Original commit message from CVS:
2004-01-04 Benjamin Otte <in7y118@public.uni-hamburg.de>
* gst-libs/gst/xoverlay/xoverlay.c: (gst_x_overlay_base_init),
(gst_x_overlay_got_xwindow_id), (gst_x_overlay_get_desired_size),
(gst_x_overlay_got_desired_size):
* gst-libs/gst/xoverlay/xoverlay.h:
Add optional "desired size" signal and querying.
Original commit message from CVS:
2004-01-01 Ronald Bultje <rbultje@ronald.bitfreak.net>
* configure.ac:
Fix configure check for mpeg2enc. We need 1.6.1.93 instead of
1.6.1.92, since the pkg-config file of 1.6.1.92 is borked and
it therefore uses the wrong include paths. Too bad... Note
that 1.6.1.93 is not release yet. ;).
Also add a check for mplex, which is now using the lib'ified
mplex from mjpegtools, too.
* ext/ffmpeg/gstffmpegcodecmap.c:
Add codec_tag for 3ivx/xvid. For xvid, this should fix playback
issues. I don't think ffmpeg handles 3ivx correctly, so this
probably won't work. But it won't hurt either.
* ext/ffmpeg/gstffmpegdec.c: (gst_ffmpegdec_connect),
(gst_ffmpegdec_chain):
* ext/ffmpeg/gstffmpegenc.c: (gst_ffmpegenc_connect),
(gst_ffmpegenc_chain_audio):
Fix memleak in audio encoding. Close codec if open fails, this
calls the cleanup routines so we can re-use the context.
* ext/mpeg2enc/gstmpeg2enc.cc:
Fix pad template names/types, fix memory issue with getcaps().
* ext/mpeg2enc/gstmpeg2encoder.cc:
* ext/mpeg2enc/gstmpeg2encoder.hh:
Fix compile issue with new caps system (const thingy).
* ext/mpeg2enc/gstmpeg2encpicturereader.cc:
* ext/mpeg2enc/gstmpeg2encpicturereader.hh:
We read a first frame right on initing, so that we have a caps
when we init the output. This caps is cached in padprivate and
read as first frame.
* ext/mplex/Makefile.am:
* ext/mplex/gstmplex.cc:
* ext/mplex/gstmplex.h:
* ext/mplex/gstmplex.hh:
* ext/mplex/gstmplexibitstream.cc:
* ext/mplex/gstmplexibitstream.hh:
* ext/mplex/gstmplexjob.cc:
* ext/mplex/gstmplexjob.hh:
* ext/mplex/gstmplexoutputstream.cc:
* ext/mplex/gstmplexoutputstream.hh:
We wrap mjpegtools mplex. So I rewrote the plugin. The old plugin
had issues, didn't do capsnego, supported only a subset of the
mplex features and required a mplex fork in our local CVS. Plus
that it worked agaist a very old mplex version. Rewriting was
faster than updating it.
* gst-libs/ext/Makefile.am:
* gst-libs/ext/mplex/INSTRUCT:
* gst-libs/ext/mplex/Makefile.am:
* gst-libs/ext/mplex/README:
* gst-libs/ext/mplex/TODO:
* gst-libs/ext/mplex/ac3strm_in.cc:
* gst-libs/ext/mplex/audiostrm.hh:
* gst-libs/ext/mplex/audiostrm_out.cc:
* gst-libs/ext/mplex/aunit.hh:
* gst-libs/ext/mplex/bits.cc:
* gst-libs/ext/mplex/bits.hh:
* gst-libs/ext/mplex/buffer.cc:
* gst-libs/ext/mplex/buffer.hh:
* gst-libs/ext/mplex/fastintfns.h:
* gst-libs/ext/mplex/format_codes.h:
* gst-libs/ext/mplex/inputstrm.cc:
* gst-libs/ext/mplex/inputstrm.hh:
* gst-libs/ext/mplex/lpcmstrm_in.cc:
* gst-libs/ext/mplex/mjpeg_logging.cc:
* gst-libs/ext/mplex/mjpeg_logging.h:
* gst-libs/ext/mplex/mjpeg_types.h:
* gst-libs/ext/mplex/mpastrm_in.cc:
* gst-libs/ext/mplex/mpegconsts.cc:
* gst-libs/ext/mplex/mpegconsts.h:
* gst-libs/ext/mplex/mplexconsts.hh:
* gst-libs/ext/mplex/multplex.cc:
* gst-libs/ext/mplex/outputstream.hh:
* gst-libs/ext/mplex/padstrm.cc:
* gst-libs/ext/mplex/padstrm.hh:
* gst-libs/ext/mplex/stillsstream.cc:
* gst-libs/ext/mplex/stillsstream.hh:
* gst-libs/ext/mplex/systems.cc:
* gst-libs/ext/mplex/systems.hh:
* gst-libs/ext/mplex/vector.cc:
* gst-libs/ext/mplex/vector.hh:
* gst-libs/ext/mplex/videostrm.hh:
* gst-libs/ext/mplex/videostrm_in.cc:
* gst-libs/ext/mplex/videostrm_out.cc:
* gst-libs/ext/mplex/yuv4mpeg.cc:
* gst-libs/ext/mplex/yuv4mpeg.h:
* gst-libs/ext/mplex/yuv4mpeg_intern.h:
* gst-libs/ext/mplex/yuv4mpeg_ratio.cc:
We don't fork mjpegtools' mplex in our CVS anymore.
* gst/avi/gstavidemux.c: (gst_avi_demux_src_getcaps),
(gst_avi_demux_add_stream):
* gst/avi/gstavidemux.h:
Add getcaps() function for proper caps nego. This makes some
parts of AVI playback/reading work.
* sys/ximage/ximagesink.c: (gst_ximagesink_sinkconnect):
Resize window on new capsnego. This is probably wrong, but
I'm still committing it because with current capsnego, the
first successfull capsnego is auto-fixated, therefore rounded
down to the lowest values in the caps. this results in a 16x16
XWindow that is not reized when real capsnego finishes.
Dave, I see more cases of this, do you know a proper solution?
* tools/gst-launch-ext.in:
Fix MPEG-4 AAC (Apple iPod/iTunes) file commandline.
Original commit message from CVS:
* examples/gstplay/player.c: (got_time_tick), (got_stream_length),
(got_video_size), (main): using g_print instead of g_message.
* gst-libs/gst/play/gstplay.c: (gst_play_pipeline_setup): Fixing EOS
signal which was not emitted because of "switch" element added to the
bin but not connected. (Removing from the bin temporarily)
Original commit message from CVS:
* configure.ac: X_DISPLAY_MISSING is set to 1 if AC_PATH_XTRA fails to
find X development files. I don't understand the previous tests and
they fail on my debian/ppc unstable. This one works.
* examples/gstplay/player.c: (main): Set the pipeline to READY before
exiting.
* gst-libs/gst/play/gstplay.c: (gst_play_get_length_callback),
(gst_play_set_video_sink), (gst_play_set_audio_sink),
(gst_play_set_visualization): Add some safety checks in set_ methods
and state_change. This was throwing some ugly CRITICAL messages when
pipeline was getting disposed and casts were failing.
Original commit message from CVS:
Sorry Dave... Add mpegversion=1 to mp3 caps everywhere so that the autoplugger uses mad and not faad for mp3 decoding. This should fix mp3 playback.
Original commit message from CVS:
tagging stuff and build fixes. In detail:
- make gdk-pixbuf loader work when distchecking
- fix invalid syntax in ffmpeg Makefile. wildcards for EXTRA_DIST are not allowed. This broke builds where distdir != srcdir
- fix ffmpeg cvs grabbing when srcdir != distdir
- new id3tag plugin for id3 tag reading/writing (uses mad's libid3tag)
- mad and libid3tag require mad/libid3tag v0.15. Fixed configure to require that
- added ogg demuxer in ext/ogg. The demuxer does not handle events yet. Especially getting seeking right will require some effort or code copying from libvorbis.
- added raw vorbis detection to typefinding. oggdemux requires a typefind function to detect its contents.
- tags plugin in gst/tags. Provides API in <gst/tags/gsttagediting.h>. API includes tag matching GStreamer <=> ID3 and GStreamer <=> vorbis and writing/reading vorbiscomments or ID3v1 tags. Also included is a simple vorbiscomment reader/writer. Writing will not really work though until someone writes oggmux.
- various build fixes. Mostly missing (DIST)CLEANFILES.
- vorbisenc handles tag writing.
Now it's YOUR turn to fix and write more plugins that handle writing/reading of tags. :)
Original commit message from CVS:
make colorspace handle the original RGB format, too, since it handles both. Add the template caps for the reverse format to video.h
Original commit message from CVS:
Remove all config.h includes from header files, add it to each source file and remove duplicate config.h includes from several source files
Original commit message from CVS:
Don't set the actual video size in gst_video_sink_got_video_size().
This could probably be replaced once we handle pixel aspect ratios.
Original commit message from CVS:
Patch avcodec.h and wmadec.c to use flag1 and flag2 from context
The asfdemux calculates the 2 values and gives them to the decoder via the pad/caps
The ffdec_wmav1 & ffdec_wmav2 put them in the ffmpeg context before they start to decode the data
Original commit message from CVS:
Some prettification fixes to this interface... Make it look good, make it simple and make it more GObject'ific. This means that it now works largely almost the same as GObject (concerning arguments that you give to the functions, and layout of the virtual functions). I've also got an OSS implementation for this, but it needs one small change before I commit that. Expect that this weekend or so.
Original commit message from CVS:
first bunch of conversions to new plugin_init. Includes libs/gst, gst/id3, sys/oss, ext/gnomevfs, gst/typefind and ext/mad.
You guessed it, everything Rhythmbox needs ;)
fixed BMP typefind and made gnomevfs one plugin instead of two while doing this
Original commit message from CVS:
merge TYPEFIND branch. Major changes:
- totally reworked type(find) system
- all typefind functions are in gst/typefind now
- more typefind functions then before
- some plugins might fail to compile now because I don't have them installed and they
a) require bytestream or
b) haven't had their typefind fixed.
Please fix those plugins and put the typefind functions into gst/typefind if they don't have dependencies
Original commit message from CVS:
Add audio/x-id3 as a mimetype handled by mad.
Could also be a flac file apparently, but this allows it to work more times than it does currently
Original commit message from CVS:
Some interface implementations for video4linux/video4linux2 plugins:
* a Tuner interface, with which one can select inputs and stations. Audio
work is underway here, but unfinished.
* A Xoverlay interface with which one can do simple overlay. Similar to
the API of the v4l/Xv XFree86 extension. Widget implementation for
GTK-2.0 coming up in the sandbox.
* Colorbalance - for adapting colors (brightness, contrast, etc.) - pretty
basic and maybe somewhat overdesigned. But it'll do for now.
Apart from these interfaces, there's also a loadable library 'xwindowlistener'
that listenes to X for the movement of a window and the overlap of other
windows. This is partly copied from xawtv (and thus partly GPL :(), but it's
needed for the xoverlay interface implementation in the v4l/v4l2 elements.
Lastly, some small changes to remove redundant properties from the v4l/v4l2
elements since these can be done much simpler. Comments appreciated!
Original commit message from CVS:
Make GstMixerTrack a GObject. I also want to make it emit several signals, starting work is in here but it's not fully implemented yet. for OSS, this will cause issues, but for ALSA, this is all automated.
Original commit message from CVS:
There was a floating doubt on the way visualization is written. We use 'z' everywhere now. Both in gst-player and libgstplay
Original commit message from CVS:
Corrected macro in medi-info-priv.h so that it follows ISO standards,
and removed broken return from void function in navigation.c
Original commit message from CVS:
Changing have_xid to have_video_out to match the new GstVideoSink parent object.
Adding have_vis_size.
Fixing gst_play_connect_visualisation
Original commit message from CVS:
Adding needed license information. The patch was reviewed and approved by
Christian Shaller. Ronald Bultje and Benjamin also responded with
comments.
Original commit message from CVS:
Remove .pc files from CLEANFILES, since it's done automatically by
automake during distclean instead of (incorrectly) during clean.
Original commit message from CVS:
Fix another instance of audio/raw -> audio/x-raw-int and
video/raw -> video/x-raw-{yuv,rgb}. There probably should
be a audio/x-raw-float for jacksink but I didn't add that.
Original commit message from CVS:
* actually recurse into sndfile if we are able
* big ladspa cleanups, mainly to comply with the buffer-frames caps property, but also general
cleanups
- the samplerate prop is gone, if you want to set it explicitly (as in for get-based plugins)
you need to use a filtered connection, just like with buffer-frames
* big float2int and int2float changes for buffer-frames compatibility - I think it's quite a bit
simpler
* make the ossclock general, add it to gstaudio, and use it in sndfile as well
i need to update mimetypes, but that's coming soon. there are some other plugins that don't
support buffer-frames, i guess i need to get around to fixing them as well.
Original commit message from CVS:
A big rewrite of the spec file and some ffmpeg disting fixes. The ffmpeg plugin still doesn't build for me, but I think I am getting close :)
Original commit message from CVS:
New mimetypes gone into effect today - this commit changes all old mimetypes over to the new mimetypes spec as described in the previous commit's document. Note: some plugins will break, some pipelines will break, expect HEAD to be broken or at least not 100% working for a few days, but don't forget to report bugs
Original commit message from CVS:
compatibility fix for new GST_DEBUG stuff.
Includes fixes for missing includes for config.h and unistd.h
I only ensured for plugins I can build that they work, so if some of them are still broken, you gotta fix them yourselves unfortunately.
Original commit message from CVS:
Fixing error message when a plugin is missing (gst-player -> libgstplay).
Pipeline state change on error is now done directly in error callback, there's still something weird with oss /dev/dsp ressource busy error.
Original commit message from CVS:
Error handling is inside and works :)
Mutexes have been removed. That should fix UI responsiveness problems on query_length. Please heavily test to check if they were really needed.
Some fixes in GClosures
Original commit message from CVS:
Corrected the configure.ac so it actually works. Updated some c files
so that they build on Solaris. This mostly involved supporting ISO
style variable-argument macros.
Original commit message from CVS:
Updated autogen.sh/configure.ac and various Makefiles to make the
configure script set up all gcc specific compiler arguments, rather
than hardcoding them in the Makefile.am files
Original commit message from CVS:
Make vis_video_thread play when connected afterwards
This generates some segfaults in gst_thread but we need to fix that
Original commit message from CVS:
Made a theorical libgstplay which refs/unrefs elements before putting them in AsyncQueue.
Added a "pipeline_error" signal which will later allow the player and apps to detect that pipeline was unable to play and why...
This version is NOT STABLE AT ALL. it will need fixes in core but i commit it as is so that we fix those problems
Original commit message from CVS:
make Company happy : Changed visualisation pipeline structure.. audio sink is directly connected to tee so no queue between volume and audio sink...
Original commit message from CVS:
Port some changes from 0.6.0/0.6.1 back to HEAD (.pc files moved to pkg-config/, .m4 file moved from plugins to core)
Original commit message from CVS:
Incorporating visualisation in libgstplay
adding have_vis_xid signal and a new type of GstPlay object (VIDEO_VISUALISATION)
Original commit message from CVS:
Added gst_gconf function to render visualisation plugin from GConf key "default/visualisation"
Enjoyed that commit to document those functions and remove commented functions
Original commit message from CVS:
gst_play_get_sink_element has been improved :
- Recursively searches in bins
- Able to find sink_element of a specified GstPlaySinkType (audio,video,any)
This now allow us to send very complex bins to GstPlay for audio/video sink without breaking length querying, eos signaling, etc..
Original commit message from CVS:
add FreeBSD patches from Andrew Turner and add missing ivorbis m4 to cvs, also disable ivorbis plugin as the test mistakes ordinary vorbis for tremor
Original commit message from CVS:
Code cleanup and reorganization
I ll now be able to make nice gtk-doc for this lib
Fixed latency bug on async_queue pop
X video window now comes immediatly
Original commit message from CVS:
added func gst_play_set_data_src
removed pipeline GST_PLAY_PIPE_VIDEO_THREADSAFE - it never worked and its just taking up space
Original commit message from CVS:
another batch of connect->link fixes
please let me know about issues
and please refrain of making them yourself, so that I don't spend double
the time resolving conflicts
Original commit message from CVS:
Fixed gst_play_dispose function so that GstPlay objects can be unrefed safely.
Optimized some g_idle_add for the signal poller.
Original commit message from CVS:
added functions gst_gconf_get_default_{audio,video}_sink -- this is so the
defaults library (gstgconf) can be used by applications with uninstalled gstreamer
(ie, no gconf keys). More specifically, these functions enable the player to
work uninstalled, which is a good thing (tm).
Original commit message from CVS:
adds functions gst_cast_float and gst_cast_double. Will use lrint and lrintf if available and a pure c rounding macro if not.
This is where optimised asm alternatives can be placed - omega, this means you!
However you have to prove that your asm version is faster than lrintf ;)
Original commit message from CVS:
currently this creates an empty shared library, just so the header can be installed. I would appreciate help on how to do this properly with automake.
Original commit message from CVS:
* added plugin_desc structures to libs, which makes their locations cached in the registry. this
speeds plugin loading considerably, especially on uninstalled versions.
* put the lib path before all others, for speed reasons.
* some fixes to adder's caps.
* added linefeeds (\n) to GST_DEBUG strings to match GST_INFO behavior. this is more sane. all
code will need to be converted. i think some perl can do this.
Original commit message from CVS:
* removal of //-style comments
* don't link plugins to core libs -- the versioning is done internally to the plugins with the plugin_info struct,
and symbol resolution is lazy, so we can always know if a plugin can be loaded by the plugin_info data. in theory.
Original commit message from CVS:
s/@GST_PLUGIN_LDFLAGS@/$(GST_PLUGIN_LDFLAGS)/
@-substitued variables variables are defined as make variables automagically,
and this gives the user the freedom to say make GST_PLUGIN_LDFLAGS=-myflag
Original commit message from CVS:
made changes everywhere to accomodate for the headers being in
<gst/(lib)/...>
we'll need to conclude this fast because we will also need to change stuff in core real soon for the libs in order to fix everything
and I can't do it right now because I disabled all of the plugins here ;)
Original commit message from CVS:
moving and renaming
we put the libs in the source in gst-libs/gst/(dir)
the headers get installed in prefix/include/gst/(dir)
the libs are installed in prefix/lib/gst
with a libgst prefix
the sources should be without the gst prefix
as per irc agreement
please comment if this sounds like a bad idea ;)
