For each period, media presentation is the relative to the
period-start time. So SIDX seek position should be target seek
position minus period-start. Also, if presentationTimeOffset
is defined, the value should be compensated
https://bugzilla.gnome.org/show_bug.cgi?id=780397
Significant whitespace in elements that don't have begin/end values
should inherit timing from its parent, or if no its parents have no
timing, from the document's Root Temporal Extent. Currently, such
whitespace is removed, which is not spec-compliant. Fix this by
retaining whitespace in content nodes, and assigning a Root Temporal
Extent of 24 hours to any significant whitespace whose parents have no
associated timing.
https://bugzilla.gnome.org/show_bug.cgi?id=781027
The specified behaviour in TTML when lineHeight is "normal" is different
from the behaviour when a percentage is given. In the former case, the
line height is a percentage (the TTML spec recommends 125%) of the largest
font size that is applied to the spans within the block; in the latter
case, the line height is the given percentage of the font size that is
applied to the block itself.
The code doesn't correctly implement this behaviour; this patch fixes
that.
https://bugzilla.gnome.org/show_bug.cgi?id=780402
In TTML, the height of every line in a block is determined by lineHeight
and fontSize style attributes, and should be the same for each line in
that block, regardless of whether different sized text appears on
different lines. Currently, a single PangoLayout is used to lay out all
the text in a block; however, pango will vary the line height in a
layout depending on the size of text used in each line, which is not
compliant with TTML.
This patch makes ttmlrender lay out the lines in a block itself, rather
than using a PangoLayout to do the work. The code still uses a
PangoLayout to render the text of each element, but the overall layout
of the text in a block is now controlled by ttmlrender itself. By doing
this, ttmlrender is able to ensure that the height of each line in a
block is correct.
https://bugzilla.gnome.org/show_bug.cgi?id=780402
The element now exposes properties to enable and configure
voice activity detection, and posts "voice-activity" messages
when the return value of stream_has_voice () changes.
https://bugzilla.gnome.org/show_bug.cgi?id=779138
A live manifest may have a set (> LookAheadFragmentCount) of fragments
that have already been served and are stored on the server, maybe
indefinitely. Adding the parsed live fragments after the manifest
fragments breaks duration reporting and the seekable range.
Fix by only adding parsed fragments outside the list of fragments which
assumes that the fragment list in the manifest is accurate enough to not
stray too far off what's in the retrieved data.
https://bugzilla.gnome.org/show_bug.cgi?id=779447
Instead of just going to the first or last fragment, report if we're
going outside the index. This should never happen unless there's a bug
or the stream is broken.
Allow some possibility for inaccuracies here though.
There is no guarantee that the index positions are the same between
representations, and assuming this easily causes us to get into invalid
index positions.
If a MPD is On-Demand profile and no index described, demux will terminate
download loop after parsing inband SIDX with flow return custom-success.
At this moment, SIDX index is excat target position, but finish_fragment()
might cause re-advancing subfragment depending on MPD structure.
https://bugzilla.gnome.org/show_bug.cgi?id=776200
SIDX's base offset (i.e., byte offset of SIDX + sidx.first_offset)
mostly vary as per fragment. Also, target SIDX index must be zero for the
new fragment.
https://bugzilla.gnome.org/show_bug.cgi?id=776200
Try to find fragment using MPD first, then do refinement to find
target subframgnet using SIDX if possible. Note that, if target fragment
was moved from the previously activated one, we should assume that
the last SIDX is invalid for new fragment.
https://bugzilla.gnome.org/show_bug.cgi?id=776200
SIDX based playback is not restricted to SegmentBase, but it possible
with SegmentList/SegmentTemplate. In the latter case, each fragment
has its own SIDX box and might be subdivided into subfragment.
So, demux should not assume that the end of subfragment is the end
of stream. Moreover, should try advance subfragment only if there
are remaining subfragments.
With additional fixes by Sebastian Dröge <sebastian@centricular.com>
https://bugzilla.gnome.org/show_bug.cgi?id=776200
All code interacting with Objective-C objects should now use Automated
Reference Counting rather than manual memory management or Garbage
Collection. Because ARC prohibits C-structs from containing
references to Objective-C objects, all such fields are now typed
'gpointer'. Setting and gettings Objective-C fields on such a
struct now uses explicit __bridge_* calls to tell ARC about
object lifetimes.
https://bugzilla.gnome.org/show_bug.cgi?id=777847
hlsdemux tries to find type if given buffer size is large enought to
find type (currently the threshold is 2KB), or EOS in some cases.
However, since there can be small byte fragments such as WebVTT,
demux should try to find type at the end of a fragment
https://bugzilla.gnome.org/show_bug.cgi?id=779011
This appears to be the internal limit of voaacenc, higher
bitrates will be ignored and 128 kbps output will be produced
instead. Therefore, we might just as well limit the allowed
property values, so that people who try to set higher bitrates
get a big fat warning instead of silently a much lower bitrate.
The PCR_flag and PCR value is in adaptation_field, not in payload.
The MSB of adaptation_field_control is used as whether adaptation_
field is exist or not.
For the case(PCR in only adaptation_field without payload), we modify
checking condition about adaptation_field_control field.
https://bugzilla.gnome.org/show_bug.cgi?id=778731
When MPD@suggestedPresentationDelay is not present in the MPD,
dashdemux can provide default suggestedPresentationDelay. However
when applying default value of suggestedPresentationDelay, the value
should be subtracted from current time, not added to it. When streams
setup is performed and live point is calculated, we have to go to the
wall clock (current time) minus suggestedPresentationDelay, if we tried
to start with current time plus suggestedPresentationDelay, we would
be asking for future stream, which has not yet been recorded. Also
the value needs to be converted from ms to us.
https://bugzilla.gnome.org/show_bug.cgi?id=764726
For duration queries on live streams, adaptivedemux ignores the query.
The problem then is that the query is answered by the downstream
qtdemux element, with the duration of the currently passing fragment.
This commit changes the behaviour of adaptivedemux to answer the duration
queries for live streams, returning GST_CLOCK_TIME_NONE.
https://bugzilla.gnome.org/show_bug.cgi?id=753879
The same symbol also exists in libgstgl, although marked as private and
internal. This has no effect when doing static linking and there's a
symbol conflict.
When the sink receives a buffer that is neither a wl_shm one nor a
dmabuf one, this buffer is copied to an internal wl_shm buffer before
being sent to the display.
In that case, the actual size of the received buffer (which may differ
from the one negotiated in the caps) must be used.
https://bugzilla.gnome.org/show_bug.cgi?id=777841
Unless the video format has an alpha component (ARGB, ...), set the
video_surface opaque.
In the usual case where the black area_surface has the same size as the
video_surface (eg: run gst-play-1.0 video.mp4), this makes the black
surface totally occluded which makes weston compositor's life easier
since it can ignore that surface.
Also unconditionally set the black area_surface opaque.
https://bugzilla.gnome.org/show_bug.cgi?id=778078
Otherwise the destructor will never be called, and we would have to call
the constructors manually at some point... which we never did, so
calling release() on it before it got otherwise initialized caused a
crash. For example when running gst-inspect-1.0.
Vulkan handles are either pointers (64-bit) or 64-bit integer
handles (32-bit). Cast the type in failure cases.
vkwindow.c:229:561: error: return makes integer from pointer without a cast [-Werror=int-conversion]
vkwindow.c:231:194: error: return makes integer from pointer without a cast [-Werror=int-conversion]
https://bugzilla.gnome.org/show_bug.cgi?id=777979
hls live starts playback from the allowed latest fragment,
but its "sequence position" is set to zero, and so stream
time is also set to zero.
This does not make sense, because hls live allows seeking to past position,
and it's negative stream time from downstream element's point of view.
Note that, allowed seekable range (and seeking query) is
from the first fragment of playlist to the allowed latest fragment.
https://bugzilla.gnome.org/show_bug.cgi?id=777682
HLS spec 6.3.3 is saying that
"the client SHOULD NOT choose a segment which starts less than
three target durations from the end of the Playlist file."
To ensure above statement, the third fragment from the end of playlist
should be excluded from seekable range and also from available starting fragment.
(i.e., the fourth fragment from end of playlist is the starting fragment).
https://bugzilla.gnome.org/show_bug.cgi?id=777682
During live playback, the first fragment in a updated
playlist can be advanced from that of startup playlist.
Meanwhile, since hlsdemux finds target seek position
by just accumulating fragment's duration, the base should
be adjusted to the updated first fragment's timestamp.
https://bugzilla.gnome.org/show_bug.cgi?id=777682
vkimagememory.c:64:14: warning: implicit conversion from enumeration type 'GstVideoGLTextureType' to different enumeration type 'VkFormat' (aka 'enum VkFormat') [-Wenum-conversion]
return GST_VIDEO_GL_TEXTURE_TYPE_RGB16;
https://bugzilla.gnome.org/show_bug.cgi?id=777760
gstmpeg2enc.cc:224:5: warning: variable 'n' is incremented both in the loop header and in the loop body [-Wfor-loop-analysis]
n++;
^
gstmpeg2enc.cc:221:29: note: incremented here
for (n = 0; fpss[n] != 0; n++) {
^
Without failing, we would play back random parts of the stream which is
arguably a worse user experience, and failing is also recommended by the
spec here.
And also handle live streams without any media sequence numbers at all
properly, that is, make sure the sequence numbers are increasing instead
of starting again at 0 every time.
https://bugzilla.gnome.org/show_bug.cgi?id=775665
Parsing SIDX box was allowed even if "indexRange" attribute does not appear
for On-Demand profile. However, actual seeking using SIDX index did not happen
since download loop keep working on.
To use SIDX index in that case, demux should try it in the next download loop.
https://bugzilla.gnome.org/show_bug.cgi?id=777394
gst_caps_intersect () may return an increased reference of one of the
input caps.
Fixes critical in the simple-launch-lines test:
Unexpected critical/warning: gst_caps_set_features: assertion 'IS_WRITABLE (caps)' failed
Reset redraw_pending at display disconnection, so we can re-connect
later from a clean state (avoid endless buffer drops).
Add a log to inform of dropped buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=775791
sidx has "first_offset" syntax which represents the distance in bytes
from anchor point to media fragment. If present, we should adjust
sidx_base_offset.
https://bugzilla.gnome.org/show_bug.cgi?id=776431
Previous patch allows sidx box parsing from incoming buffers.
Since the incoming buffer boundary might be over sidx box,
there can be remaining buffer in isobmff parser adapter.
https://bugzilla.gnome.org/show_bug.cgi?id=776352
If they were not ported after 4+ years it seems unlikely that anybody is
ever going to need them again. They're still in the GIT history if
needed.
https://bugzilla.gnome.org/show_bug.cgi?id=774530
They often don't only contain the PCR information but also other
metadata, like title. Give this information to the pipeline.
Also strip the tags from the stream as we a) already parsed them now and
b) decoders don't like these tags to happen in the middle of the stream
(i.e. the start of each fragment) and tagdemux only can strip them off
the beginning and end.
middle textures in gleffects do not need to use GstGLMemoryPBO as they
aren't transfering data to/from the GPU. This will cost too much DMA
memory and cause performance issue. Change the allocator to use non-PBO
GstGLMemory.
https://bugzilla.gnome.org/show_bug.cgi?id=776072
glvideomixer does not support it currently and it needs special support
for handling this correctly, and is rather non-trivial to implement for
all formats.
For pre-1.1.x openssl, a callback to set the thread id needs to be
provided to openssl. In 0.9.x the thread id was an unsigned long. In
1.0.x it was expanded to be able to hold a void*. Here we change to use
the 1.0.x API so that the thread id can always hold a GThread*, even on
platforms like msvc x64 where unsigned long is only 32 bits.
All of this is still #ifdef'd out of existence when building with
openssl 1.1.x or later which changed the thread API again, and does not
need a thread id callback.
https://bugzilla.gnome.org/show_bug.cgi?id=775292
Simply produce the result into the output image provided by the base
class. This avoid useless copy. This also removes unchecked buffer map
and ensure that GstVideoMeta is respected (for stride mostly).
https://bugzilla.gnome.org/show_bug.cgi?id=775377
Simply produce the result into the output image provided by the base
class. This avoid useless copy. This also removes unchecked buffer map
and ensure that GstVideoMeta is respected (for stride mostly).
https://bugzilla.gnome.org/show_bug.cgi?id=775377
Simply produce the result into the output image provided by the base
class. This avoid useless copy. This also removes unchecked buffer map
and ensure that GstVideoMeta is respected (for stride mostly).
https://bugzilla.gnome.org/show_bug.cgi?id=775377
When a MSS server hosts a live stream the fragments listed in the
manifest usually don't have accurate timestamps and duration, except
for the first fragment, which additionally stores timing information
for the few upcoming fragments. In this scenario it is useless to
periodically fetch and update the manifest and the fragments list can
be incrementally built by parsing the first/current fragment.
https://bugzilla.gnome.org/show_bug.cgi?id=755036
The schroedinger headers unconditionally #define over C99's rint when
compiling with msvc which messes up the later inclusion of math.h.
Including math.h before schroedinger headers avoids getting syntax
errors in math.h
https://bugzilla.gnome.org/show_bug.cgi?id=775293
a) Use get_pkgconfig_variable() to get the opencv prefix
b) Place an upper limit on the opencv version
c) Ensure that headers are available
(b) and (c) just copy what the configure.ac checks do.
The way how strchr() was called here, it could easily read after the end
of the string. Use g_ascii_isspace() instead.
Detected by asan in the unit test.
When one is only updating the "stop" position (i.e. non-flushing seek,
with GST_SEEK_TYPE_NONE on the "start" (or stop in reverse) position),
we only need to store those values instead of moving the current position.
https://bugzilla.gnome.org/show_bug.cgi?id=775127
wldisplay.c:179:15: error: comparison of unsigned enum expression < 0 is always false [-Werror,-Wtautological-compare]
if (shm_fmt < 0)
~~~~~~~ ^ ~
gstsegmentation.cpp:419:40: error: implicit conversion from 'int' to 'char' changes value from 255 to -1 [-Werror,-Wconstant-conversion]
filter->cvFG->imageData[j] = 255;
~ ^~~
https://bugzilla.gnome.org/show_bug.cgi?id=775112
We set it to TRUE here, but later we set it to TRUE again anyway if the
parsing actually succeeded at this point. Let's keep the second one.
CID 1374360.
This was used by MSN messenger in prehistoric times, it's safe
to say no one needs or wants this any more these days. For
decoding old recordings there's still a decoder in ffmpeg.
https://bugzilla.gnome.org/show_bug.cgi?id=597616
Section 5.3.3 in ISO/IEC 23009-1:2014 defines that invalid references
(e.g., invalide URI or cannot be resolved) specified by "@xlink:href" attribute
shall be removed. That means, we should play it without error,
and just ignore the corresponding element.
It's similar to "urn:mpeg:dash:resolve-to-zero:2013".
https://bugzilla.gnome.org/show_bug.cgi?id=774463
It only offers one metric for now, "dssim", available if
https://github.com/pornel/dssim was installed on the system
at the time the plugin was compiled.
The spearman correlation for dssim against the TID2008 dataset
is 0.81, against 0.70 for the old ssim implementation, and
it runs 15 times faster.
https://bugzilla.gnome.org/show_bug.cgi?id=751324
External xml could have empty, one or multiple top-level "Period" elements.
Because xml parser cannot parse the multiple top-level elements
(i.e., no root element), we need to wrap a xml in order to make root element.
See also ISO/IEC 23009-1:2014 5.3.2.2
https://bugzilla.gnome.org/show_bug.cgi?id=774357
PlayReady being the one of the few DRM formats encoding its data with
base64 it was not consistent to have a special case for this. So the
base64 decoding operation now needs to be done by the protection event
consumer, if needed.
https://bugzilla.gnome.org/show_bug.cgi?id=774112
PlayReady being the one of the few DRM formats encoding its data with
base64 it was not consistent to have a special case for this. So the
base64 decoding operation now needs to be done by the protection event
consumer, if needed.
https://bugzilla.gnome.org/show_bug.cgi?id=774112
Allows seeking through the available fragments that are still available
on the server as specified by the DVRWindowLength attribute in the
manifest.
https://bugzilla.gnome.org/show_bug.cgi?id=774178
1. Need set use-default-fbo to qquickwindow during set property
to support change render target on the fly.
2. Calculate qmlglsrc refresh frame rate in qtglwindow
https://bugzilla.gnome.org/show_bug.cgi?id=774035
Support the wayland zwp_linux_dmabuf_unstable_v1 protocol.
SHM formats and DMABuf formats are exposed differently in caps: the
DMABuf formats are flagged with GST_CAPS_FEATURE_MEMORY_DMABUF.
No buffer pool is proposed for DMABuf buffers, it is the upstream
element responsibility to provide with such buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=711155
ttml was recently added but it won't compile unless libxml2 version 2.9.2
or later is available. In that version the first parameter of xmlGetProp
switched to being a const. In previous versions the compiler complains
about passing a const value to a non const argument.
This allows pushing the destruction of vulkan resources after the signalling
of an vulkan event. The event facilitates knowing when a specific point in the
vulkan queue has been reached. Only after the event has been signaled can
vulkan resources be freed and/or reused.
- DTLSv1_method() is deprecated, and since 1.0.2 replaced by
DTLS_method().
- CRYPTO_set_locking_callback() and CRYPTO_set_id_callback() are
no-ops (empty macros) since 1.1 and are not supposed to be used
anymore.
gstdtlsagent.c: In function ‘gst_dtls_agent_init’:
gstdtlsagent.c:173:3: error: ‘DTLSv1_method’ is deprecated [-Werror=deprecated-declarations]
priv->ssl_context = SSL_CTX_new (DTLSv1_method ());
^~~~
In file included from /usr/include/openssl/ct.h:13:0,
from /usr/include/openssl/ssl.h:61,
from gstdtlsagent.c:40:
/usr/include/openssl/ssl.h:1614:1: note: declared here
DEPRECATEDIN_1_1_0(__owur const SSL_METHOD *DTLSv1_method(void)) /* DTLSv1.0 */
^
At top level:
gstdtlsagent.c:103:1: error: ‘ssl_thread_id_function’ defined but not used [-Werror=unused-function]
ssl_thread_id_function (void)
^~~~~~~~~~~~~~~~~~~~~~
gstdtlsagent.c:73:1: error: ‘ssl_locking_function’ defined but not used [-Werror=unused-function]
ssl_locking_function (gint mode, gint lock_num, const gchar * file, gint line)
^~~~~~~~~~~~~~~~~~~~
If the playlist does not contain any iframe variants then
demux->master->iframe_variants is NULL. If the previous variant is an
iframe variant then there is at least one iframe variant and
demux->master->iframe_variants->data can be safely used.
https://bugzilla.gnome.org/show_bug.cgi?id=773635
Changes are:
- Use the wrapper functions to access opaque data types. To preserve
backward compatibility, define fallback definitions
- Remove the use of idiom "pqueue_size(ssl->d1->sent_messages)", since
there is no replacement
- Use RSA_generate_key_ex instead of the deprecated RSA_generate_key
https://bugzilla.gnome.org/show_bug.cgi?id=773540
MSVC warns about this because it's a C++ compiler, and this actually
results in useful things such as the incorrect 'gboolean' return value
for functions that return GstFlowReturn, so let's do explicit
conversions to reduce the noise and increase its efficacy.
With MSVC, this gives the following warning:
warning C4305: 'function': truncation from 'double' to 'gfloat'
Apparently, MSVC does not figure out what type to use for constants
based on the assignment. This warning is very spammy, so let's try to
fix it.
The headers we include already define boolean on Windows with MSVC, and
it leads to a typedef redefinition error with jpeglib.h which tries to
redefine it in jmorecfg.h
When only linking the element, the upload object will be created from
_transform_caps() but will never be unreffed as the only case is in _stop().
Add an unref if non-NULL to a new finalize handler for this case.
It's possible that the window may have been destroyed when a winsys
event comes in for it.
Fixes an assertion in make -C tests/check generic/states.check
The buffer data is not always copied in _Fill, and will be
read in _DecodeFrame. We unmap at the end of the function,
whether we get there via failure or early out, and keep a
ref to the buffer to ensure we can use it to unmap the
memory even after _finish_frame is called, as it unrefs
the buffer.
Note that there is an access beyond the allocated buffer,
which is only apparent when playing from souphttpsrc (ie,
not from filesrc). This appears to be a bug in the bit
reading code in libfdkaac AFAICT.
https://bugzilla.gnome.org/show_bug.cgi?id=772186
This is specific to when the waylandsink is not being embedded. In
this patch we pass the render lock to the window so it can safely
call gst_wl_window_set_render_rectangle() with the new size.
https://bugzilla.gnome.org/show_bug.cgi?id=722343
We already take the render lock from the wlqueue thread in some other
place which indicates that there is no use of this atomic instead of
a proper locking mechanism.
When we don't have a viewporter (scaling support), we can't use the
1x1 scaleup image trick. Instead, we need to allocate a buffer with
the same size as the area that need to have black background.
This add support for non-standard strides to be used. Note that
some extra work is needed for multi-plane format which may have
a different GstMemory object per plane. This is not currently a
problem since SHM interface is limited to 1 memory.
The buffer pool API does not allow multiple of owner. This otherwise
lead to error when renegotiation take place. Aso consider the
allocation query "need_pool" boolean.
Fixes an assertion when moving from passthrough to non-passthrough
Without an explicit reconfigure, glfiter won't have created the GL
resources such as the FBO, GL bufferpool, etc and basetransform will
allocate sysmem buffers instead.
This makes the viewporter interface optional. The end result is
obviously far from optimal, though it greatly helps testing on older
compostitors or gnome-wayland. We can make it strictly needed later when
this new interface get widely adopted.
When start qmlglsink app, it will set NULL buffer to GstQSGTexture
in which case that qt_context_ will be a random value and cause
gst_gl_context_activate() fail.
https://bugzilla.gnome.org/show_bug.cgi?id=770925
Previously it was created in the init function and destroyed in ::stop, which
lead to segfaults when reusing the element.
Now the upload object is created in ::transform_caps if it is NULL, which is the
earliest we need it. The other vfuncs already bail out if the upload object is
NULL, which means that negotiation wasn't done.
Now when used with video/x-raw as input, the GLMemoryUpload method checks for
->tex_target in input GLMemory(es) and sets the output texture-target
accordingly.
Fixes video corruption with a pipeline like avfvideosrc ! video/x-raw !
glimagesink where on macos avfvideosrc pushes RECTANGLE textures but glupload
was configuring texture-target=2D as output.
The videoaggregator negotiation sequence changed some time
back and broke glstereomix. Instead of doing nego incorrectly
in the find_best_format() vfunc, do it directly in the
update_caps() method.
And scale the bitrate with the absolute rate (if it's bigger than 1.0) to get
to the real bitrate due to faster playback.
This allowed in my tests to play a stream with 10x speed without buffering as
the lowest bitrate is chosen, instead of staying/selecting the highest bitrate
and then buffering all the time.
It was previously disabled for not very well specified reasons, which seem to
be not valid anymore nowadays.
It implements now this interface with its video-direction
property. Values are changed to GstVideoOrientationMethod but they have
the same value than the originals.
https://bugzilla.gnome.org/show_bug.cgi?id=768687
https://github.com/mesonbuild/meson
With contributions from:
Tim-Philipp Müller <tim@centricular.com>
Matej Knopp <matej.knopp@gmail.com>
Jussi Pakkanen <jpakkane@gmail.com> (original port)
Highlights of the features provided are:
* Faster builds on Linux (~40-50% faster)
* The ability to build with MSVC on Windows
* Generate Visual Studio project files
* Generate XCode project files
* Much faster builds on Windows (on-par with Linux)
* Seriously fast configure and building on embedded
... and many more. For more details see:
http://blog.nirbheek.in/2016/05/gstreamer-and-meson-new-hope.htmlhttp://blog.nirbheek.in/2016/07/building-and-developing-gstreamer-using.html
Building with Meson should work on both Linux and Windows, but may
need a few more tweaks on other operating systems.
_stdint.h is generated by Autotools and we don't really need it. All
supported platforms now ship with stdint.h. The only stickler was MSVC,
and since Visual Studio 2015 it also ships stdint.h now.
It now returns the correct values for both orthographic and perspective
projections and takes into account the aspect ratio of the video, handles
the Y-flipping in GL and by us and uses some more helpers from graphene.
Fixes spurious segfault in unit test, where the task was started again during
shutdown when all pads were removed... and was then still running while the
element was finalized.
We don't have to do yet another additional request but can just download the
data directly.
Also unify the key-unit only mode buffer pushing and extract it into its own
function now that it became more complicated.
https://bugzilla.gnome.org/show_bug.cgi?id=741104
We need to mark every first buffer of a key unit as discont, and also every
first buffer of a moov and moof. This ensures that qtdemux takes note of our
buffer offsets for each of those buffers instead of keeping track of them
itself from the first buffer. We need offsets to be consistent between moof
and mdat
https://bugzilla.gnome.org/show_bug.cgi?id=741104
Fixes the following error when building in osx.
error: implicit conversion from enumeration type
'GstJPEG2000Colorspace' to different enumeration type
'GstJPEG2000Sampling'
This reverts commit 947656cfd2.
This makes all dash seeking tests fail. Needs more testing to fully understand
what's going wrong. Revert ok'd by Sebastian
We don't need to call the latter at all as we're definitely in this period and
the segment is selected via the SIDX.
This is especially important when doing SNAP seeks, as otherwise we would
always start from the beginning of the period (usually 0) again.
After the check in line 1,111, media->uri can't be NULL. So the two checks
for GST_HLS_MEDIA_TYPE_CLOSED_CAPTIONS are the same, removing the redundant
one which goes to cc_unsupported.
CID 1364752
Create an output stream for each media when alternate renditions
are present. Update the manifests for all those streams, and
make sure that typefinding is still done for files smaller than 2KB
such as small WebVTT files.
When fetching a byte-region from a server resource,
adjust the downstream buffer offsets so that downstream
doesn't know. This is because id3demux insists on the
first offset being 0. Later we might strip ID3 headers
entirely and this will be unneeded.
Modify playlist updating to track information across updates
better, although still hackish.
When connection_speed == 0, choose the default variant
not the first one in the (now sorted) variant list, as that
will have the lowest bitrate.
Make M3U8 and GstM3U8MediaFile refcounted. The contents
of it and GstM3U8MediaFile are pretty much immutable
already, but if we make it refcounted we can just
return a ref to the media file from _get_next_fragment()
instead of copying over all fields one-by-one, and then
copying them all into the adaptive stream structure fields again.
Move state from client into m3u8 structure. This will
be useful later when we'll have multiple media playlists
being streamed at the same time, as will be the case with
alternative renditions.
This has the downside that we need to copy over some
state when we switch between variant streams.
The GstM3U8Client structure is gone, and main/current
lists are not directly in hlsdemux. hlsdemux had as
many CLIENT_LOCK/UNLOCK as the m3u8 code anyway...
The gst_dash_demux_get_live_seek_range () function returns a stop value
that is beyond the available range. The functions
gst_mpd_client_check_time_position() and
gst_mpd_client_get_next_segment_availability_end_time() in
gstmpdparser.c include the segment duration when checking if a segment
is available. The gst_dash_demux_get_live_seek_range() function
in gstdashdemux.c ignores the segment duration.
According to the DASH specification, if maxSegmentDuration is not present,
then the maximum Segment duration is the maximum duration of any Segment
documented in the MPD.
https://bugzilla.gnome.org/show_bug.cgi?id=753751
There's no need for the jump to an extra thread in most cases, especially
when relying solely on a shader to render. We can use the provided
render_to_target() functions to simplify filter writing.
Facilities are given to create fbo's and attach GL memory (renderbuffers
or textures). It also keeps track of the renderable size for use with
effective use with glViewport().
Don't clear decryption state immediately after
initialising it in the start_fragment. Don't clear
the state of all streams when we want to only clear
the current stream.
https://bugzilla.gnome.org//show_bug.cgi?id=768757
Add demuxer instance-wide decryption key cache. The current and
last key url are per-stream, so make a shared cache. Move the
decryption handling into the stream object, and use the shared
cache for the keys.
Prepare hlsdemux for more than one single stream. Currently hlsdemux
assumes there'll only ever be one stream and most of the stream-specific
state is actually in the hlsdemux structure. Add a stream subclass
instead and move some stream-specific members there instead.
In this mode, we let WebRTC Audio Processing figure-out the delay. This
is useful when the latency reported by the stack cannot be trusted. Note
that in this mode, the leaking of echo during packet lost is much worst.
It is recommanded to use PLC (e.g. spanplc, or opus built-in plc).
In this mode, we don't do any synchronization. Instead, we simply process all
the available reverse stream data as it comes.
