GValueArray is deprecated. Use GstValueArray instead.
gst_param_spec_array can be deserialized from command line using:
vaapih264enc view-ids="<(uint)40,(uint)100>" num-views=2
While the g_param_spec_value_array() can not, and always get
error: "gst_value_deserialize_g_value_array: unimplemented"
Also fixed an out-of-range bug.
The order in gst_vaapi_enc_picture_encode when encoding one
picture is not very correct. The misc parameters are set before
the picture parameters. Some of the misc parameters such as
ROI may change the current picture parameters. But the later
setting of picture parameter will re-init all picture related
parameters and clear the previous setting. The right order
should be picture parameter first and then misc parameters.
Signed-off-by: He Junyan <junyan.he@hotmail.com>
This code is just confused. It's asking for at least as many bits of
(z-axis) depth as the root window has bits of (color) depth. For rgb565
or rgb888 this is harmless, but at 10 bits per channel this demands a
30-bit or deeper Z buffer. While some hardware could in principle do a
32-bit Z buffer, Mesa does not expose such fbconfigs (at least on Intel
and AMD).
We're not actually using the Z buffer, so just stop asking for one.
[wl_shell] is officially [deprecated], so provide support for the
XDG-shell protocol should be provided by all desktop-like compositors.
(In case they don't, we can of course fall back to wl_shell).
Note that the XML file is directly provided by the `wayland-protocols`
dependency and generates the protocol marshalling code.
[wl_shell]: https://people.freedesktop.org/~whot/wayland-doxygen/wayland/Client/group__iface__wl__shell.html
[deprecated]: 698dde1958
native-id property is problematic since the variable that stores it is
gsize, which is platform specific, and in some is bigger than unsigned
long, and there are not way to handle gsize properties.
Also, GST_VAAPI_ID_INVALID is defined in gsize terms, and we would
like to keep using it for this scope.
This patch removes the native-id property and set it manually in
gst_vaapi_window_new_internal().
gst_vaapi_encoder_put_frame() and gst_vaapi_encoder_flush() duplicates
the same code segment where the coded buffer is created, the picture
encoded on it and pushed to the async queue.
The function gst_vaapi_encoder_encode_and_queue() refactor this.
In order to flush the pending pictures, a new internal encoder vmethod
is used: get_pending_reordered()
This method follows an iterator pattern which will return the next
picture to encode and push.
The base encoder will call this function in a loop when flush() is called.
For now, only H.264 and H.265 encoders implement this flushing mechanism.
This is another step in the gobjectification of the internal library
of gstreamer-vaapi. Now it is the turn of GstVaapiWindow and its
derivates.
The idea is to minimize the changeset keeping the same design as
much as possible.
GstVaapiWindow is defined as an abstract class with two properties:
the GstVaapiDisplay and the native ID. Thus, many of the
GstVaapiObject macros were copied as GstVaapiWindow macros.
The function gst_vaapi_window_new_internal() is kept as a decorator
of for calling gst_vaapi_window_create() and the possibility of
failure.
The descendant classes, such as glx, still use the private
structures, but through the gobject mechanism.
Add 444 10bit yuv format Y410, which can be used to decode
main-444 10bit streams. Currently, this feature is only
supported by media-driver in Icelake.
Add more kinds of chrometype which will be used to describe
new video formats. Sync it with 1.4.0 version header file.
Alse delete useless GST_VAAPI_CHROMA_TYPE_YUV410 chrome type.
Signed-off-by: He Junyan <junyan.he@hotmail.com>
We lack some video format because endianness declare.
The video format should not directly relate to endianness. For example,
ARGB on big endian should not be simplely seen as BGRA on little endian
machine. We should provide endianess convert or format convert help
functions if endianness does not match.
https://gitlab.freedesktop.org/gstreamer/gstreamer-vaapi/issues/112
Signed-off-by: Junyan He <junyan.he@intel.com>
Add 422 10bit yuv format Y210, which can be used to decode
main-10-422 10bit streams. Currently, this feature is only
supported by media-driver in Icelake.
https://bugzilla.gnome.org/show_bug.cgi?id=797264
VA_ROI_RC_QP_DELTA_SUPPORT return value will be ignored when the
rate control mode is set as CQP. In CQP mode, it shouldn't check
roi_rc_qp_delta_support return value from driver backend.
https://bugzilla.gnome.org/show_bug.cgi?id=797087
In gst_vaapi_context_reset(), if the context has to be destroyed, make
sure to create it first before allocating its associated surfaces.
This patch fixes a regression introduced in commit 82872f4 because
the formats available in the current context now are ensured before
creating the context's surfaces.
https://bugzilla.gnome.org/show_bug.cgi?id=797277
Removed exposed macros GST_VAAPI_OBJECT_DISPLAY() and
GST_VAAPI_OBJECT_ID() to plugins, keeping them only for internal
library usage.
The purpose is readability.
https://bugzilla.gnome.org/show_bug.cgi?id=797139
When running several vaapi elements at the concurrently, at
initialization, there is a race condition when extractin the avaible
formats for images and subpictures.
This patch add a lock when the those arrays are filled.
https://bugzilla.gnome.org/show_bug.cgi?id=797039
Low delay B frame provide the function of transforming
P frame into low delay B frame which frame type is B, but
only reference predictive frames. This can be used when P
frame unsupported. Especially for P and B both unsupported,
in this case, I and low delay B frame can be encoded in a
stream.
https://bugzilla.gnome.org/show_bug.cgi?id=796984
In some cases, the found_picture ended up being evicted and freed, which
would lead to a use after free when accessing picture->base.poc. In this
fix, we take a ref on the picture before calling dpb_evict.
https://bugzilla.gnome.org/show_bug.cgi?id=787124
Similarly to previous patch, we have no error concealment. As a side
effect, it's better to skip slices with missing references then passing
NULL pointers to the accelerator. Passing NULL pointer would lead to
major visual artifact, a behaviour that is likely undefined.
https://bugzilla.gnome.org/show_bug.cgi?id=787124
Usually in case of MVC decoding, dpb size is increasedi if subset sps.
That's why it resets context without this patch.
But for some media it doesn't increase dpb size. Even in this case we
should reset context to deal with MVC decoding.
Otherwise, it leads to assert.
https://bugzilla.gnome.org/show_bug.cgi?id=787124
If the unit could not be parsed, just skip this nal and keep parsing
what is left in the adapter. We need to flush the broken unit in the
decoder specific parser because the generic code does not know about
units boundary. This increases error resilliance.
Before this, the broken unit would stay in the adapter and EOS would be
returned. Which stopped the streaming. Just removing the EOS would have
lead to the adapter size growing indefinitely.
https://bugzilla.gnome.org/show_bug.cgi?id=796863
h264 log messages were logged in default category because a regression
in code. This patch renable the usage of vaapi logging category.
This regression was introduced in commit 7c365bdd.
This patch chains up failure to executing the modification process. The
end result is that we now fail decoding the slice if this process fails.
This avoid sending a corrupted state to the accelerator. In some special
cases, this could lead to unrecoverable errors.
https://bugzilla.gnome.org/show_bug.cgi?id=796832
gst_adapter_masked_scan_uint32_peek() asserts if size is 0. Don't
try and scan in that case. This fixes assertion that would some times
happen when the stream is corrupted.
https://bugzilla.gnome.org/show_bug.cgi?id=796832
This change is due a problem encoding JPEGs with Intel's
media-driver: green/black image when playback jpeg
This patch sets component identifier and quantization table
destination selector in frame header to support packing headers
by Intel's media-driver that does not accept packed header
in AP level.
https://bugzilla.gnome.org/show_bug.cgi?id=796705
The decoder was trying to detect earlier that a field was lost base
on guessing the parity order. This breaks in streams were the parity
order changes.
This patch reverts the field order prediction code added by commit
8dd93e9c8.
https://bugzilla.gnome.org/show_bug.cgi?id=796169
This ensure that we always have sentinels set in the reference
pictures arrays. The code wasn't unsafe, this simply improve the
tracing, so instead of printing 32 lines of zeros, va tracer
prints proper empty lists.
https://bugzilla.gnome.org/show_bug.cgi?id=796169
Gobjectification for GstVaapiDisplay was almost done by the commit 185da3d1.
But still something breaking GObject code convention remains, which is
calling gst_vaapi_display_new() in each decendants.
This patch replaces it with gst_vaapi_display_config(), defined in private
header.
https://bugzilla.gnome.org/show_bug.cgi?id=796470
The function name was gst_vaapi_display_create_unlocked(), nonetheless
it wasn't called unlocked. In order to keep the semantics this patch
renames the gst_vaapi_display_create_unlocked() as
gst_vaapi_display_create(), removing the previous function
gst_vaapi_display_create().
https://bugzilla.gnome.org/show_bug.cgi?id=796470
This is, practically, a revert of commit dcf135e2.
The parent logic is useful for the EGL display, which is a decorator
of the real windowing subsystem (X11 or Wayland). Thus it is avoided
calling vaInitialize() and vaTerminate() twice.
https://bugzilla.gnome.org/show_bug.cgi?id=795391
gst_vaapi_display_egl_new_with_native_display() has been broken since
it wasn't used.
Currently it's needed to call this API to create a display providing
the EGL display, so it could avoid duplicated calls to the native
display (eg. eglTerminate).
Signed-off-by: Victor Jaquez <vjaquez@igalia.com>
https://bugzilla.gnome.org/show_bug.cgi?id=795391
This change is due a problem decoding JPEGs with Intel's media-driver:
no image was generated.
This patch relases the VA buffers after vaEndPicture() is called,
and not before (after vaRenderPicture()).
https://bugzilla.gnome.org/show_bug.cgi?id=796505
The specification says,
"log2_max_pic_order_cnt_lsb_minus4 shall be in the range of 0 to 12, inclusive."
This patch changes the upper limit from 6 to 12.
https://bugzilla.gnome.org/show_bug.cgi?id=796179
This removes hard-coded checks on the parent subsystem of potential DRM
devices. These checks were set to exlude devices that do not originate
from the PCI bus, which is only a valid approach on x86 devices.
Other devices may have a DRM device originating from the platform
subsystem, so the checks that were previously restricted to PCI are
extended to cover platform devices as well.
https://bugzilla.gnome.org/show_bug.cgi?id=794840
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Otherwise the following poll may not return for an arbitrary amount of
time. This can happen if another wayland event queue has flushed and read
our events.
https://bugzilla.gnome.org/show_bug.cgi?id=795224
pic_width_in_luma_samples/pic_height_in_luma_samples can be 16-bit rounded
instead of 32-bit.
In addition, codedbuf_size must be calculated according to this change.
https://bugzilla.gnome.org/show_bug.cgi?id=753229
Even if it is the h264parse fault or bad video file, vaapih264dec
should set a proper value for VAPictureParameterBufferH264.num_ref_frames
as the driver might use it.
Also see "info.ref_frames = dpb_size;" in
gstvaapidecoder_h264.c::ensure_context
https://bugzilla.gnome.org/show_bug.cgi?id=793836
Check input buffers for ROI metas and pass them to VA. Also added a
new "default-roi-delta-qp" property in order to tell the encoder what
delta QP should be applied to ROI by default.
Enabled it for H264 and H265 encoders.
https://bugzilla.gnome.org/show_bug.cgi?id=768248
According to Debian package auto-building, uintptr_t is not an
unsigned long in i386 arch, raising an "incompatible pointer type"
error.
This patch adds a casting for compiler's satisfaction in i386.
Increased max values of periodic key frame for h26x codecs.
This allow more fine tunning of encoder that in certian scenario
want higher periodic key frame.
For example: it doesn't want a key frame each 10 seconds but
each 120 seconds.
https://bugzilla.gnome.org/show_bug.cgi?id=786320
eglGetDisplay() is currently broken in Mesa for Wayland. Also using
eglGetDisplay() is rather fragile, and it is recommended to use
eglGetPlatformDisplay() when possible.
In order to do that, this patch uses the helper in GstGL. If
gstreamer-vaapi is not compiled with GstGL support, eglGetDisplay()
will be used.
https://bugzilla.gnome.org/show_bug.cgi?id=790493
Frames are encoded as different layers. Frame in a particular
layer will use pictures in lower or same layer as references.
Which means decoder can drop the frames in upper layer but still
decode lower layer frames.
B-frames, except the one in top most layer, are reference frames.
All the base layer frames are I or P.
eg: with 3 temporal layers
T3: B1 B3 B5 B7
T2: B2 B6
T1: I0 P4 P8
T1, T2, T3: Temporal Layers
P1...Pn: P-Frames:
B1...Bn: B-frames:
T1: I0->P4 , P4->P8 etc..
T2: I0--> B2 <-- P4
T3: I0--> B1 <-- B2, B2 --> B3 <-- P4
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=788918
Frames are encoded as different layers. A frame in a particular
layer will use pictures in lower or same layer as references.
Which means decoder can drop the frames in upper layer but still
decode lower layer frames.
eg: with 3 temporal layers
T3: P1 P3 P5 P7
T2: P2 P6
T1: P0 P4 P8
T1, T2, T3: Temporal Layers
P1...pn: P-Frames:
P0->P1 , P0->P2, P2->P3, P0->P4......repeat
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=788918
The frame_num generation was not correctly implemented.
According to h264 spec, frame_num should get incremented
for each frame if previous frame is a referece frame.
For eg: IPBPB sequece should have the frame numbers 0,1,2,2,3
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=788918
Adds new property "prediction-type" to select different reference
picture selection modes like hierarchical-p, hierarchical-b etc.
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=788918
Adds some basic building blocks to ease the implementation
of hierarchical prediction modes.
-- add an utility method to find temporal level of each frame
-- define max_ref_frame count based on temporal level count
-- add temporal_level_div[] for finding temporal level each frame
to be encoded.
-- find ip_period based on temporal level count
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=788918
Adds new property "temporal-levels" to select the number of
temporal levels to be included in the encoded stream.
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=788918
We can have p-frame as non-ref and also b-frame as ref
which are not supported yet. Reference flag
is the first machinery needed for more advanced
reference picture selection modes.
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=788918
Adds a new function that changes the internal EGL display to the
current one (eglGetCurrentDisplay()) and sets the current context
too (eglGetCurrentContext()).
This new function is called by gst_vaapi_texture_egl_create() updating
the GstVaapiDisplayEGL with the current EGL display.
https://bugzilla.gnome.org/show_bug.cgi?id=773453
It is required to use the context of the calling thread when wrapping
a foreign texture. According the documentation of
GstVideoGLTextureUploadMeta:
"The caller of gst_video_gl_texture_upload_meta_upload() must
have OpenGL set up and call this from a thread where it is valid
to upload something to an OpenGL texture."
This patch updates the EGL display and context in GstVaapiDisplay
instance to the one used by te renderer that uploads the texture.
Original-patch-by: Daniel van Vugt <daniel.van.vugt@canonical.com>
https://bugzilla.gnome.org/show_bug.cgi?id=773453
Instead of silently fail to export the image if there is not available
the EGL_MESA_drm_image, log an error message. Also a code refactoring
was done.
https://bugzilla.gnome.org/show_bug.cgi?id=773453
In case of streaming, controlling bitrate dynamically for encoder might be
important to manage quality of the streaming.
This patch is to support such a scenario.
https://bugzilla.gnome.org/show_bug.cgi?id=786321
gstreamer-vaapi initializes the display by trial-and-error, thus
logging an error message if the display initialisation fails the user
may be weary of the error message in the screen, if using VA-API 1.0
This commit set the VA error log handler to GStreamer warning level
while calling vaInitialize() and set it to error after that.
https://bugzilla.gnome.org/show_bug.cgi?id=783169
GstVaapiDisplayEGL is a wrapper of another GstVaapiDisplay, either X11
or Wayland. Nonetheless it created another vaDisplay for it, instead
of using the wrapped one.
This patch enables the reuse of the wrapped vaDisplay avoiding
instantiating two.
https://bugzilla.gnome.org/show_bug.cgi?id=782212
This is a difference between the GObject API and the GstVaapi one: the
GValue passed to get a property value, in GObject has to be
initialized with g_value_init(), but in GstVaapi is has not.
In order to overcome this mismatch, this patch call g_value_init()
internally only in the passed one is not already initialized.
https://bugzilla.gnome.org/show_bug.cgi?id=788058
Shuffled some code to avoid to find the properties descriptor in the
array twice, adding the internal functions _set_property() and
_get_property().
https://bugzilla.gnome.org/show_bug.cgi?id=788058
Fixes regression introduced by commit 2eb2b26a.
There is a use case when the decoder set the src caps and immediatly
tries to process the media codec_data, this happens before decoder is
even opened, thus priv->parser is not instantiated yet.
https://bugzilla.gnome.org/show_bug.cgi?id=787818
Instead of handling the macroblock bitrate control as a integer, this
patch changes it as a enum, which is more self documented in the
GStreamer elements.
https://bugzilla.gnome.org/show_bug.cgi?id=787855
This patch fixes a regression introduced in commit 148f867c, since the
props variable is set to object's member variable
encoder->properties. And it is set in the instance initialization,
thus it will not be leaked.
https://bugzilla.gnome.org/show_bug.cgi?id=787733
Creates 2 properties, qp-ip and qp-ib for setting different QP for P/B
frames
and set slice_qp_delta for each frame according to the value provided.
https://bugzilla.gnome.org/show_bug.cgi?id=785923
