Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (apply_buffer),
(gst_single_queue_push_one), (gst_multi_queue_chain),
(gst_multi_queue_sink_event):
Make sure we don't reference the buffer/event after we have given away
ownership in the queue.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_single_queue_flush),
(gst_multi_queue_chain), (gst_multi_queue_sink_event):
Update queue state _after_ adding the item in the queue because else we
could end up being full without the element added yet.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_item_destroy),
(gst_multi_queue_item_new):
Don't use GSlice because we don't depend on >= 2.10 yet.
Original commit message from CVS:
* libs/gst/base/gstdataqueue.c: (gst_data_queue_cleanup),
(gst_data_queue_finalize), (gst_data_queue_locked_is_empty),
(gst_data_queue_set_flushing), (gst_data_queue_push),
(gst_data_queue_pop), (gst_data_queue_drop_head),
(gst_data_queue_limits_changed), (gst_data_queue_get_level):
* libs/gst/base/gstdataqueue.h:
Various cleanups.
Added methods to get the current levels and to inform the queue that the
'full' limits changed.
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_init),
(gst_multi_queue_finalize), (gst_multi_queue_set_property),
(gst_single_queue_flush), (update_time_level), (apply_segment),
(apply_buffer), (gst_single_queue_push_one),
(gst_multi_queue_item_steal_object),
(gst_multi_queue_item_destroy), (gst_multi_queue_item_new),
(gst_multi_queue_loop), (gst_multi_queue_chain),
(gst_multi_queue_sink_activate_push), (gst_multi_queue_sink_event),
(gst_multi_queue_getcaps), (gst_multi_queue_src_activate_push),
(gst_multi_queue_src_query), (single_queue_overrun_cb),
(single_queue_underrun_cb), (single_queue_check_full),
(gst_single_queue_new):
Keep track of time in the queue by measuring the difference between
running_time on input and output. This gives more accurate results and
can compensate for segments correctly.
Make a queue by default only 5 buffers deep. We will now increase the
buffer size depending on the filledness of the other queues.
Factor out commong flush code.
Make sure we don't add additional refcounts to buffers when we can avoid
it.
Propagate GstFlowReturn differently.
Use GSlice for intermediate GstMultiQueueItems.
Keep track of EOS.
Resize queues on over and underruns based on filled level of other
queues.
When checking if the queue is filled, prefer to measure in time if we
can and fall back to bytes when no time is known.
* plugins/elements/gstqueue.c:
Fix return value.
Original commit message from CVS:
* libs/gst/base/gstdataqueue.c:
* libs/gst/base/gstdataqueue.h:
* plugins/elements/gstmultiqueue.c: (gst_single_queue_push_one),
(gst_multi_queue_item_new), (gst_multi_queue_chain),
(gst_multi_queue_sink_event):
* tests/check/elements/multiqueue.c: (multiqueue_suite):
Fix multiqueue leaking buffers and events when downstream or the
queue are flushing. Make refcounting assumptions explicit and
document them (shouldn't break existing code that uses it other than
maybe leak miniobjects, but that already happens anyway). Add unit
test for the most common flushing case. Fixes#423700.
Original commit message from CVS:
* gst/gstobject.c: (gst_object_class_init):
Fix signal signature.
* gst/gstsegment.c:
Add small clarification in the api docs.
* plugins/elements/gstfilesrc.c: (gst_file_src_set_location):
States are protected with object lock.
Original commit message from CVS:
* plugins/elements/Makefile.am:
* plugins/elements/gstmultiqueue.h:
* plugins/elements/gstqueue.h:
These are not installed headers, no need for padding.
Original commit message from CVS:
* plugins/elements/gstelements.c:
* plugins/elements/gstfilesink.c: (gst_file_sink_do_seek),
(gst_file_sink_get_current_offset):
* plugins/indexers/gstindexers.c: (plugin_init):
Use #ifdef for HAVE_XYZ for consistency.
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/filesink.c: (setup_filesink),
(cleanup_filesink), (GST_START_TEST), (filesink_suite):
Add some unit tests for filesink.
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet be>
* plugins/elements/gstfilesink.c: (gst_file_sink_open_file),
(gst_file_sink_query), (gst_file_sink_do_seek),
(gst_file_sink_get_current_offset), (gst_file_sink_render):
* plugins/elements/gstfilesink.h:
Fix position reporting; rename data_written member to current_pos to
reflect its real meaning (fixes#412648).
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_loop):
Hello, I am Mr Taymans' personal debugger. Today I will introduce a fix
for the subtle art of warning a potentially blocking thread that it
should check the source pad return value, and relay the information
upstream.
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_init),
(gst_queue_finalize), (update_time_level), (apply_segment),
(apply_buffer), (gst_queue_locked_flush),
(gst_queue_locked_enqueue), (gst_queue_locked_dequeue),
(gst_queue_handle_sink_event), (gst_queue_chain),
(gst_queue_push_one), (gst_queue_loop):
* plugins/elements/gstqueue.h:
Refactor an cleanup queue a bit.
Do better time level calculations that also work when the srcpad is not
yet running.
Remove some unneeded debug lines.
* tests/check/elements/queue.c: (GST_START_TEST), (queue_suite):
Added testcase for time level measurement.
Try to make some stuff more racefree.
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_class_init),
(update_time_level), (gst_queue_locked_flush),
(gst_queue_handle_sink_event), (gst_queue_chain),
(gst_queue_push_one), (gst_queue_loop):
* plugins/elements/gstqueue.h:
Be smarter when calculating the current amount of data in the queue by
measuring the difference between start and end timestamps (in running
time) inside the queue. Fixes#432876.
API: GstQueue::pushing to notify elements that we are pushing data again
since the running signal is rather broken for this purpose.
Original commit message from CVS:
* plugins/elements/gstqueue.c (_do_init, gst_queue_signals,
gst_queue_base_init, gst_queue_init):
use GST_BOILERPLATE
Original commit message from CVS:
* plugins/elements/gstfilesink.c: (gst_file_sink_uri_set_uri):
* plugins/elements/gstfilesrc.c: (gst_file_src_uri_set_uri):
Set the location to NULL if "file://" is set as URI. Otherwise
some random previous URI would still be set if "file://" is
set on an already used filesink/filesrc.
Original commit message from CVS:
* plugins/elements/gstfilesink.c: (gst_file_sink_uri_set_uri):
* plugins/elements/gstfilesrc.c: (gst_file_src_uri_set_uri):
Special case the "file://" URI as as this is used by some
applications to test with gst_element_make_from_uri if there's
an element that supports the URI protocol.
Also move the g_path_is_absolute() check for the location part
of the URI to also check this for "file://localhost/bla" URIs.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_release_pad):
Don't deadlock when releasing a pad - gst_pad_set_active may try
and take the multiqueue lock too.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c:
(gst_base_sink_queue_object_unlocked), (gst_base_sink_event):
Fix leak caused when refusing newsegment after EOS.
* plugins/elements/gstfakesink.c: (gst_fake_sink_class_init),
(gst_fake_sink_init), (gst_fake_sink_set_property),
(gst_fake_sink_get_property), (gst_fake_sink_preroll),
(gst_fake_sink_render), (gst_fake_sink_change_state):
* plugins/elements/gstfakesink.h:
Add num-buffers property to make the element generate EOS after a
configurable amount of buffers.
API: fakesink::num-buffers property.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Fix GstBus leak in test.
Test for fakesink num-buffers.
Original commit message from CVS:
Patch by: Tommi Myöhänen <ext-tommi dot myohanen at nokia dot com>
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_release_pad):
Deactivate pads and free GstSingleQueue with gst_single_queue_free()
when releasing sink pad. Fixes#425400.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_single_queue_free):
Don't leak GCond.
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* tests/check/elements/multiqueue.c: (setup_multiqueue),
(GST_START_TEST), (multiqueue_suite):
Add some dead simple unit tests for the 'multiqueue' element
(some bits don't work yet and are disabled for now).
Original commit message from CVS:
* plugins/elements/gstidentity.c (gst_identity_check_imperfect_offset):
So we should use correct constants for checking for None offset.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_flushing),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek),
(gst_base_src_default_event), (gst_base_src_unlock_stop),
(gst_base_src_deactivate):
* libs/gst/base/gstbasesrc.h:
Add ::unlock_stop to basesrc and basesink. This allows an opportunity
for sub-classes to correctly clear any state they set trying to
unlock, such as clearing out unlock commands from a command fd.
* plugins/elements/gstfdsink.c: (gst_fd_sink_class_init),
(gst_fd_sink_render), (gst_fd_sink_unlock),
(gst_fd_sink_unlock_stop):
* plugins/elements/gstfdsrc.c: (gst_fd_src_class_init),
(gst_fd_src_init), (gst_fd_src_unlock), (gst_fd_src_unlock_stop),
(gst_fd_src_create), (gst_fd_src_get_size), (gst_fd_src_do_seek):
Implement unlock_stop in fdsrc and fdsink.
Implement seeking in fdsrc when a seekable fd is passed, as in
gst-launch-0.10 fdsrc ! ... ! xvimagesink < /path/to/file
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_finalize),
(gst_single_queue_free):
Fix small leak (free GstSingleQueue structure too, not only contents).
Original commit message from CVS:
* plugins/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_init), (gst_identity_check_perfect),
(gst_identity_check_imperfect_timestamp),
(gst_identity_check_imperfect_offset), (gst_identity_transform_ip),
(gst_identity_set_property), (gst_identity_get_property):
* plugins/elements/gstidentity.h:
Separate out check-imperfect-timestamp and check-imperfect-offset.
Put back check-perfect as it was to keep compatibility.
Original commit message from CVS:
2007-03-08 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* plugins/elements/gstidentity.c: (gst_identity_check_perfect):
Fix check for perfect stream to ignore buffers with -1
offsets/offset ends when checking data contiguity.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_activate):
* libs/gst/base/gstbasetransform.h:
Add support for dropping buffers with custom GstFlowReturn.
Set DISCONT flags on outgoing buffers based on QoS, incomming DISCONT
buffers or dropped buffers.
* docs/libs/gstreamer-libs-sections.txt:
docs for new custom return code.
* plugins/elements/gstidentity.c: (gst_identity_transform_ip):
Use drop support in base class to implement drop-probability.
Original commit message from CVS:
2007-03-07 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* plugins/elements/gstidentity.c: (gst_identity_check_perfect):
Only post bus message at max, once per buffer received.
Original commit message from CVS:
2007-03-07 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* plugins/elements/gstidentity.c: (gst_identity_check_perfect):
Rename non-perfect to imperfect for Mike and for the sanctity of
the language.
Also make sure bus message gets emitted for data-incontiguities.
Original commit message from CVS:
2007-03-07 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* plugins/elements/gstidentity.c: (gst_identity_check_perfect),
(gst_identity_start):
* plugins/elements/gstidentity.h:
Emit bus message if check-perfect is true and we encounter a
non-perfect stream between 2 consecutive buffers.
Fixes#415394.
Original commit message from CVS:
* plugins/elements/gstfilesink.c: (gst_file_sink_uri_set_uri):
* plugins/elements/gstfilesrc.c: (gst_file_src_uri_set_uri):
Also check for an absolute path following file:// in the filesrc
element. Remove redundant check and call g_path_is_absolute() on the
unescaped location.
Original commit message from CVS:
* gst/gstbin.h:(gst_bin_get_by_interface),
(gst_bin_iterate_all_by_interface):
Replace interface parameter name by iface as interface is
a reserved keyword in Visual Studio for C++ projects so it removes
a build error for application developpers using VS.
* plugins/elements/gstfilesrc.c:(gst_file_src_uri_set_uri):
Fix a bug on Windows in uri format check. Now the prefix checked
is file:// and next we check if the path after file:// is absolute.
* win32/common/libgstbase.def:
* win32/common/libgstdataprotocol.def:
* win32/common/libgstgstreamer.def:
Add new exported functions.
Original commit message from CVS:
2007-02-09 Andy Wingo <wingo@pobox.com>
* tests/check/pipelines/simple-launch-lines.c (test_tee): Add
tests for push and pull tee behavior.
* plugins/elements/gsttee.h:
* plugins/elements/gsttee.c: Describe has-sink-loop better, and
mark as deprecated as well as unimplemented. It was a crack idea.
Add support for tee operating in pull mode, off by default.
Original commit message from CVS:
Patch by: Michal Benes <michal dot benes at itonis dot tv>
* plugins/elements/gstfilesrc.c: (gst_file_src_create_read):
Correctly generate EOS for non-seekable files. We don't have a total
length for them and would get an unexpected end of file if we only
special-cased for regular files. (Fixes: #404569)
Original commit message from CVS:
reviewed by: Wim Taymans <wim@fluendo.com>
* plugins/elements/gstfilesink.c: (gst_file_sink_uri_set_uri):
* plugins/elements/gstfilesrc.c: (gst_file_src_uri_set_uri):
Allow file://localhost/foo/bar URLs and correctly fail for every other
hostname that one sets. This was gnomevfssrc is linked for those if
installed as it can handle it (#403172)
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_chain_do_typefinding),
(gst_type_find_element_change_state):
Don't leak found caps in chain function (no idea why that never
showed up as a leak anywhere).
Original commit message from CVS:
Patch by: Jindrich Makovicka <jindrich.makovick at itonis dot tv>
* plugins/elements/gstfilesrc.c: (gst_file_src_start):
If not using mmap'ed files try to seek to the end instead of the
start to determine whether we can seek at all. This fixes the case
of 2GB+ files over NFS, where seeks in the first 2GB can succeed but
seeks for everything afterwards fail. Fixes#400656
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c:
(gst_multi_queue_loop):
Small fix.
(single_queue_overrun_cb), (single_queue_underrun_cb),
(single_queue_check_full), (gst_single_queue_new):
Implement single queue growth system.
This uses the extra-size properties, and will grow single queues by
that much if one goes full whereas there are others empty. This is
called extra-mode in the code.
When a single queue's levels go back below the initial max-size
limits, it is no longer in extra-mode. This is to ensure we don't
consume too much memory.
Fixes#399875
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c:
(gst_multi_queue_src_activate_push), (gst_single_queue_new):
Remove previous hack of unsetting the flushing flag for the source pad
instead of activating it. Instead, fix the source pad activate function
so that it no longer depends on having a parent set or not.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_single_queue_new):
When dynamically creating single queues, activate sinkpad before adding
it.
We should be doing the same thing for the source pad, but we can't
since it would call a method which needs the parent to be set in order
to work propertly. Instead of activating the source pad, we just unset
the flushing flag, which is the minimal requirement for adding a pad
to an element in a state greater than READY.
Original commit message from CVS:
* plugins/elements/gstfakesrc.c:
Use g_random_int_range(), since it produces better random
numbers in a range than almost-correct floating point code.
Original commit message from CVS:
* gst/gst.c:
Docs typo fix.
* plugins/elements/gstqueue.c: (gst_queue_class_init),
(gst_queue_init):
Fix incorrect documentation and flesh it out a bit more.
Set default values for the max properties on the GParamSpec as well,
so it shows up correctly in gst-inspect.
Original commit message from CVS:
* plugins/elements/gstidentity.c: (gst_identity_check_perfect):
Print additional debug info when the stream isn't perfectly
timestamped; don't try to use invalid durations.
Original commit message from CVS:
Patch by: Peter Kjellerstedt <pkj at axis com>
* plugins/elements/gstfdsrc.c: (gst_fd_src_create):
Another printf fix (#371493).
Original commit message from CVS:
* plugins/elements/gstfdsrc.c: (gst_fd_src_update_fd),
(gst_fd_src_create):
Add some debugging.
Only update fd when it's different from the old.
Original commit message from CVS:
Based on patch by: Jan David Mol <j.j.d.mol at tudelft nl>
* plugins/elements/gstfilesink.c: (gst_file_sink_class_init):
* plugins/elements/gstfilesrc.c: (gst_file_src_class_init),
(gst_file_src_map_small_region), (gst_file_src_create_mmap):
Printf fixes for gsize parameters on PPC/OSX (#369366). Also,
don't cast to long long for portability reasons, but use
GLib's types instead.
Original commit message from CVS:
* plugins/elements/gstfdsrc.c: (gst_fd_src_update_fd):
Get the arguments to lseek() the right way around.
Fixes 367677.
Original commit message from CVS:
* docs/plugins/gstreamer-plugins.args:
* docs/plugins/inspect/plugin-coreelements.xml:
* docs/plugins/inspect/plugin-coreindexers.xml:
Update element args.
* gst/gstsystemclock.c:
Small comment update.
* plugins/elements/gsttee.c: (gst_tee_class_init), (gst_tee_init),
(gst_tee_request_new_pad), (gst_tee_release_pad),
(gst_tee_buffer_alloc), (gst_tee_sink_activate_push),
(gst_tee_sink_activate_pull):
* plugins/elements/gsttee.h:
Some tee loving:
Add default property defines.
Implement release pad function.
Give properties better blubs etc.
Activate pads before adding them to a running tee.
Do simple buffer_alloc on the first requested pad.
Post error when activation fails.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* plugins/elements/gstqueue.c: (gst_queue_chain):
Recheck queue filledness after signalling the overrun when we're about
to leak downstream because we released the lock when emitting the signal
and the queue could be empty again. Fixes#352345.
Original commit message from CVS:
2006-10-09 Zaheer Abbas Merali <zaheerabbas at merali dot org>
Patch by: Josep Torre Valles <josep@fluendo.com>
* common/m4/gst-error.m4:
Disable warning of statement not reached on Forte.
* gst/gstmessage.h:
Fix warning on Forte (value doesn't fit on enumeration).
* libs/gst/base/gstbasesink.c: (gst_base_sink_chain_unlocked):
Fix warning on Forte (value doesn't fit on enumeration).
* libs/gst/net/gstnetclientclock.c: (gst_net_client_clock_thread):
DEBUG macro says it takes minimum of 2 args and so Forte
complains about the use with just 1 arg.
* plugins/elements/gstfdsink.c:
* plugins/elements/gstfdsrc.c:
* plugins/elements/gstfilesink.c:
* plugins/elements/gstfilesrc.c:
Use correct return type for the uri handler implementations.
All these fix warnings in Forte. Fixes bug #360860.
Original commit message from CVS:
* plugins/elements/gstfilesink.c: (gst_file_sink_open_file),
(gst_file_sink_close_file), (gst_file_sink_event),
(gst_file_sink_render):
Add some FIXME for the NEWSEGMENT handling.
Original commit message from CVS:
* plugins/elements/gstfilesink.c: (gst_file_sink_init),
(gst_file_sink_set_location), (gst_file_sink_open_file),
(gst_file_sink_close_file), (gst_file_sink_event),
(gst_file_sink_render):
Set file to NULL when closing filesink so that we can set a new filename
in READY. Fixes#358613.
Original commit message from CVS:
* docs/pwg/building-boiler.xml:
* plugins/elements/gstcapsfilter.c:
More G_OBJECT macro fixing. Also Fix some details on the plugin-stamp
section.
Original commit message from CVS:
* plugins/elements/gstidentity.c: (gst_identity_transform_ip):
Revert previous change; I misunderstood single-segment mode.
Original commit message from CVS:
* plugins/elements/gstidentity.c: (gst_identity_transform_ip):
Unset DISCONT on buffers when using single-segment mode.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek):
Small comment update.
* plugins/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_transform_ip):
Drop-probability is broken, mention this in the code with a
FIXME and also in the property description.
Make silent also be silent about the drop messages.
Original commit message from CVS:
* plugins/elements/gstfilesrc.c: (gst_file_src_create_read):
Requesting 0 bytes before the end of the file should result in
FLOW_OK and an empty buffer, not FLOW_UNEXPECTED. Thank you
unit test.
Original commit message from CVS:
* gst/gstcaps.c: (gst_static_caps_get), (gst_caps_get_structure):
Fix useless assert, a uint is always positive.
* gst/gststructure.c: (gst_structure_nth_field_name),
(gst_structure_foreach), (gst_structure_map_in_place):
Check input arguments for public functions to avoid obvious crashes.
* plugins/elements/gstfakesink.c: (gst_fake_sink_render):
* plugins/elements/gstfakesink.h:
Do less useless typechecking.
Original commit message from CVS:
* plugins/elements/gstfilesrc.c: (gst_file_src_class_init):
Do not use mmap() by default since there are a number of error
conditions that we would like to handle in a non-fatal way that
will result in a SIGBUS if we use mmap(). Examples: external
devices (USB harddrive, portable music player) being unplugged
while in use; file on mounted CD/DVD that can't be read because
the medium is partly damaged. Fixes#348455 and #348475.
Original commit message from CVS:
* gst/gststructure.c: (gst_structure_id_set),
(gst_structure_id_set_valist):
* gst/gststructure.h:
Add API for setting values into structures without performing
a quark lookup, if the appropriate quark is already known.
API: gst_structure_id_set
API: gst_structure_id_set_valist
* gst/parse/grammar.y:
* gst/parse/parse.l:
Remove some dead code shown by the coverage information.
Don't throw a critical g_warning when encountering a syntax error,
just warn and let the normal error path handle it.
* plugins/elements/gstelements.c:
Bump the rank of filesink up to PRIMARY so that it is preferred over
gnomevfssink for file:// sink uri's
* tests/check/pipelines/parse-launch.c: (expected_fail_pipe),
(GST_START_TEST), (run_delayed_test),
(gst_parse_test_element_base_init),
(gst_parse_test_element_class_init), (gst_parse_test_element_init),
(gst_parse_test_element_change_state),
(gst_register_parse_element), (parse_suite):
Beef up the tests for parse syntax to check that more error cases
fail as they are supposed to. Increases the test coverage a bit.
Original commit message from CVS:
* gst/gstbuffer.c: (gst_buffer_get_type), (gst_buffer_new),
(gst_subbuffer_get_type), (gst_buffer_create_sub):
Avoid function call for known types by keeping the buffer and
subbuffer GType global.
* plugins/elements/gstfilesrc.c: (gst_file_src_create_read):
Random silly optimisations in read() path.
Original commit message from CVS:
* plugins/elements/gstfilesrc.c: (gst_file_src_set_property):
Remove superfluous g_object_notify() calls, GObject does
that for us automatically.
Original commit message from CVS:
* gst/gstminiobject.c:
update docs
* plugins/elements/gstfdsrc.c: (gst_fd_src_set_property),
(gst_fd_src_create):
log recurring events at LOG level
add more debug for when the fd gets set
Original commit message from CVS:
* plugins/elements/gstfilesrc.c: (gst_file_src_class_init),
(gst_file_src_init), (gst_file_src_set_property),
(gst_file_src_get_property), (gst_file_src_map_region):
* plugins/elements/gstfilesrc.h:
Add "sequential" property, off by default, to use madvise and hint
to the kernel that sequential access is desired.
Touch all retrieved pages by default to ensure they are pulled
into memory. (Closes#345720)
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_message_error),
(gst_check_run_suite):
if we get the wrong message, give us the types as string
* plugins/elements/gstfilesrc.c: (gst_file_src_start):
Fix a translatable
* tests/check/elements/filesrc.c: (GST_START_TEST):
add a test for trying to open a non-existing file
Original commit message from CVS:
* configure.ac:
set CFLAGS and friends to -O0 if gcov is being used
add GCOV LIBS
* gst/Makefile.am:
* libs/gst/base/Makefile.am:
* libs/gst/check/Makefile.am:
* libs/gst/controller/Makefile.am:
* libs/gst/dataprotocol/Makefile.am:
* libs/gst/net/Makefile.am:
* plugins/elements/Makefile.am:
* plugins/indexers/Makefile.am:
add makefile rules to generate gcov data and clean up
* tests/check/Makefile.am:
add a coverage target that generates an html overview
of coverage data
Original commit message from CVS:
* plugins/elements/gstfilesink.c: (gst_file_sink_open_file),
(gst_file_sink_close_file), (gst_file_sink_do_seek),
(gst_file_sink_event), (gst_file_sink_render):
* plugins/elements/gstfilesink.h:
Check if we can seek in the file instead of assuming
we always can. Post an error when we are asked to seek in a
non-seekable file (like a fifo). Fixes#343312.
Some cleanups.
Original commit message from CVS:
* plugins/elements/gstelements.c:
* plugins/elements/gstfilesrc.c: (gst_file_src_class_init),
(gst_file_src_init), (gst_file_src_set_property),
(gst_file_src_get_property), (gst_file_src_start):
* plugins/elements/gstfilesrc.h:
Add a use-mmap property to enable easier testing of all code paths.
Bump rank to PRIMARY, so filesrc is the preferred file reader and used
in the absence of gnomevfssrc. (Closes#340501)
Original commit message from CVS:
Patch by: Julien Moutte <julien at moutte net>
* docs/gst/gstreamer-sections.txt:
Make new GST_FLOW_IS_SUCCESS macro visible in docs.
* plugins/elements/gstfakesink.c: (gst_fake_sink_class_init),
(gst_fake_sink_preroll):
* plugins/elements/gstfakesink.h:
Add new ::preroll-handoff signal (#337100).
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_set_caps):
Short-circuit gst_pad_set_caps if setting the existing
caps pointer again, and avoid printing debug and
reffing/unreffing the caps.
* plugins/elements/gstqueue.c: (gst_queue_push_one):
There's actually no need to set the caps before pushing -
the acceptcaps method will handle it anyway.
Original commit message from CVS:
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
The caps intersection algorithm can produce multiple copies of the
caps. Until that is fixed, we need to simplify the result to be
sure whether the allowed caps are fixed or not.
* plugins/elements/gstqueue.c: (gst_queue_init),
(gst_queue_bufferalloc), (gst_queue_acceptcaps),
(gst_queue_push_one):
Proxied buffer alloc should not set the caps on the source pad.
When pushing buffers, we always accept the caps change that triggers.
This prevents negotiation errors caused by caps changing mid-stream
and then being refused on our source pad (because upstream is now
refusing those caps).
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_push_one):
The queue is not responsible for pushing an EOS when receiving a fatal
flow error. It's up to the real element driving the pipeline to do that.
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_push_one):
The queue was posting a non-needed GST_MESSAGE_ERROR when pushing a
buffer returned a fatal error. It should just send an EOS and stop
it's task.
Upstream elements will then properly receive the GST_FLOW_UNEXPECTED
when pushing buffers on the queue and will be able to handle the event.
Original commit message from CVS:
* plugins/elements/gstqueue.c: (gst_queue_chain), (gst_queue_loop),
(gst_queue_set_property):
Don't forget to signal the _chain or _loop function
when the queue size or thresholds change since that might
cause them to make progres again.
Original commit message from CVS:
Patch by: James Andrewartha <trs80 at tartarus uwa edu au>
* gst/gst.c:
* gst/gstbus.c:
* gst/gstclock.c:
* gst/gstevent.c:
* gst/gstformat.c:
* gst/gstmessage.c:
* gst/gstparse.c:
* gst/gstquery.c:
* gst/gstutils.c:
* gst/parse/Makefile.am:
* libs/gst/base/gstadapter.c:
* libs/gst/base/gstbasesrc.c:
* libs/gst/base/gstpushsrc.c:
* libs/gst/base/gsttypefindhelper.c:
* plugins/elements/gstfakesrc.c:
* plugins/elements/gstidentity.c:
Make sure gstprivate.h and/or config.h are
always included first, otherwise some of our
defines (like _FILE_OFFSET_BITS) might be
redefined in the system headers. Fixes build
on opensolaris (#340016).
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_handle_event):
reverted wrong change and reflowed code to avoid others falling into
this trap
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_handle_event):
If we get EOS before any data is accumulated, don't use
uninitialised local variables.
Original commit message from CVS:
* plugins/elements/gstfdsink.c: (gst_fd_sink_render),
(gst_fd_sink_check_fd), (gst_fd_sink_update_fd):
handle EAGAIN, EINTR and short writes correctly. Also clean
up some error cases, avoid a deadlock on bad file descriptors and
use GST_DEBUG_OBJECT.
Fixes#339843
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet dot be>
* plugins/elements/gstfilesink.c: (gst_file_sink_render):
Don't error out on empty buffers (#336945).
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_chain):
More debug info; when skipping typefinding, send cached
events in all cases.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_chain):
Do not typefind content if the buffers already have caps.
Neccesary for icydemux (#333657), and the right thing to do anyway.
Original commit message from CVS:
Patch by Tommi Myöhänen <ext-tommi dot myohanen at nokia dot com>
* plugins/elements/gstqueue.c: (gst_queue_init),
(gst_queue_locked_flush), (gst_queue_handle_sink_event),
(gst_queue_set_property):
* plugins/elements/gstqueue.h:
In queue, when EOS is received, if minimum threshold > max_size -
current_level, there is chance that queue blocks forever in conditional item
del wait. This is because the queue is not emptied completely due to minimum
threshold.
Here is another approach. Instead of setting cur_levels to max in EOS, just
zero all minimum threshold levels. This should make sure that queue gives out
all data. When going to READY (stop) state, just reset the original minimum
threshold levels.
Fixes#336336.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c: (stop_typefinding),
(gst_type_find_element_handle_event),
(gst_type_find_element_send_cached_events),
(gst_type_find_element_change_state):
* plugins/elements/gsttypefindelement.h:
When typefinding is done in push mode, we should cache
events we receive during typefinding instead of just
dropping them (e.g. newsegment, custom events from
dvdreadsrc etc.) and then send them out once we've
determined the type of the stream (and decodebin
has had a chance to plug in a decoder/demuxer).
Original commit message from CVS:
* plugins/elements/gstfakesrc.c: (gst_fake_src_class_init),
(gst_fake_src_finalize):
Fix leaks in fakesrc.
* tests/check/pipelines/parse-launch.c: (GST_START_TEST):
Fix leaks in the testcase.
Original commit message from CVS:
* plugins/elements/gstfdsink.c: (gst_fd_sink_render):
* plugins/elements/gstfilesink.c: (gst_file_sink_render):
Emit RESOURCE_NO_SPACE_LEFT error here as well when
there's no space left on the device.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.h:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_src_event), (start_typefinding),
(stop_typefinding), (gst_type_find_element_handle_event),
(gst_type_find_element_chain),
(gst_type_find_element_chain_do_typefinding):
Use gst_type_find_helper_for_buffer() for chain-based
typefinding.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_class_init),
(gst_type_find_element_set_property),
(gst_type_find_element_get_property):
Deprecate "maximum" property (not only was it only taken into
account for typefinding in push-mode anyway, it also was never
actually possible to set it in the first place because the
property was registered with the numeric property ID for the
"minimum" property). Register "maximum" property correctly,
for the sake of future copy'n'pasters. Remove some cruft
from property get/set functions.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_activate):
Use gst_type_find_helper_get_range() here, so we
can honour the min-probability property and also emit
the signal with the correct probability of the found caps.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_get_type), (gst_bin_handle_message_func):
Help the compiler a bit with type registration.
Use existing forward cod path instead of duplicating it when
handling a message.
* gst/gstbus.c: (gst_bus_get_type):
* gst/gstcaps.c: (gst_caps_get_type), (gst_static_caps_get_type):
* gst/gstchildproxy.c: (gst_child_proxy_get_type):
* gst/gstclock.c: (gst_clock_get_type):
* gst/gstelement.c: (gst_element_get_type),
* gst/gstelementfactory.c: (gst_element_factory_get_type):
* gst/gstindexfactory.c: (gst_index_factory_get_type):
* gst/gstminiobject.c: (gst_mini_object_get_type):
* gst/gstpad.c: (gst_pad_get_type):
* gst/gstsegment.c: (gst_segment_get_type):
* gst/gststructure.c: (gst_structure_get_type):
* gst/gstsystemclock.c: (gst_system_clock_get_type):
* gst/gsttask.c: (gst_task_get_type), (gst_task_join):
* gst/gstvalue.c:
Help compiler with type registration.
* plugins/elements/gstqueue.c: (gst_queue_handle_sink_event):
Small doc update.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_handle_event):
When we get an EOS event and have not found a type yet
(most likely because we had not yet accumulated
TYPE_FIND_MIN_SIZE of data yet), try to determine the
type given the data we have so far. Fixes typefinding
for very short streams again, most notably quicktime
redirections as used on Apple's trailer site (#331701).
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_activate):
Use gst_pad_check_pull_range() before _activate_pull()
to avoid unnecessary open/close (see #331690).
Original commit message from CVS:
* plugins/elements/gstfilesrc.c: (gst_file_src_create_read):
Update src->read_position after a seek when not using mmap.
Fixes#332277, patch by: Renchi Raju <renchi gmail com>
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c: (find_peek):
We can do peeks at non-zero offsets, as long as they
fall within the buffer we have.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_chain):
When typefinding is unsuccessful in the chain function, don't
error out immediately. Only error out with NO_CAPS_FOUND if
the amount of data is at least MAX_TYPEFIND_SIZE bytes,
otherwise simply wait for more data so we can try typefinding
again with more data later. Also, don't attempt to typefind
if we have less than MIN_TYPEFIND_SIZE data available. Overall,
this should improve typefinding from network sources where the
size of the first buffer can be somewhat random.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_activate):
Post TYPE_NOT_FOUND error message when typefinding
is unsuccessful in the activate function as well.
Original commit message from CVS:
* plugins/elements/gsttee.c: (gst_tee_do_push),
(gst_tee_handle_buffer):
Always prefer an actual return value from a src
pad in place of NOT_LINKED. This means we return
WRONG_STATE when all src pads are WRONG_STATE
instead of NOT_LINKED.
Lock when replacing the last message to prevent
racing with the get_property method.
Add debug output
Original commit message from CVS:
2006-01-26 Julien MOUTTE <julien@moutte.net>
* plugins/elements/gsttee.c: (gst_tee_do_push),
(gst_tee_handle_buffer): Apply patch from #328715. Tee now
handles pad being NOT_LINKED or in WRONG_STATE.
Original commit message from CVS:
* gst/gstevent.c:
Fix docs typo
* plugins/elements/gstqueue.c: (gst_queue_handle_sink_event),
(gst_queue_chain), (gst_queue_push_one), (gst_queue_loop):
Do some refactoring. Doesn't actually change functionality,
but makes landing the DRAIN event easier later.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_class_init):
'have-type' signal needs to be G_SIGNAL_RUN_FIRST, as it is the
object method handler that sets the caps on the pad and we want
that to happen before we emit the signal (fixes e.g. feeding a
plain text file to decodebin).
Original commit message from CVS:
* gst/gstbuffer.c: (gst_buffer_is_metadata_writable),
(gst_buffer_make_metadata_writable):
* gst/gstbuffer.h:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf):
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
* tests/check/gst/gstbuffer.c: (GST_START_TEST), (gst_test_suite):
Replace gst_buffer_(make|is)_metadata_writable patch now
that the release is out.
Original commit message from CVS:
* gst/gstbuffer.c:
* gst/gstbuffer.h:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf):
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
* tests/check/gst/gstbuffer.c: (gst_test_suite):
Back out patch until after the release.
Original commit message from CVS:
(Missed plugins/elements/gstcapsfilter.c in previous commit)
Reviewed By: Andy Wingo
* gst/gstbuffer.c: (gst_buffer_is_metadata_writable),
(gst_buffer_make_metadata_writable):
* gst/gstbuffer.h:
Add gst_buffer_(is|make)_metadata_writable as analogues of
gst_buffer_(is|make)_writable.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_prepare_output_buf):
* plugins/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
Use name gst_buffer_(is|make)_metadata_writable functions.
* tests/check/gst/gstbuffer.c: (GST_START_TEST), (gst_test_suite):
Test gst_buffer_(is|make)_metadata_writable
(Closes: #324162)
Original commit message from CVS:
* plugins/elements/gstidentity.c: (gst_identity_transform_ip):
Set the buffer offset/offset_end to GST_CLOCK_TIME_NONE when using
the single-segment mode.
Original commit message from CVS:
* gst/gst.c: (init_post):
Init tags stuff and some other things before loading
any static plugins (there may be other static plugins
than just the GStreamer ones, and they may want to
register their own tags or formats or whatever, and
preferably without segfaulting).
* plugins/elements/gstqueue.c: (gst_queue_handle_src_query):
Print at least a warning in the debug logs if we drop a
query just because we don't know how to adjust the value
in the particular format.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_activate_pull), (gst_pad_link_prepare):
Don't allow activation of a srcpad in pull_range if it has no
getrange function.
Change some debug statements to be a little clearer
* plugins/elements/gsttypefindelement.c:
(gst_type_find_handle_src_query):
Check that we have a peer before executing queries thereupon.
* tests/examples/metadata/read-metadata.c: (message_loop):
Use gst_bus_pop instead of gst_bus_poll when we just want it to
immediately return us any available message with 0 timeout.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c: (stop_typefinding):
Catch the special case where we are operating chain-based,
but the downstream peer pad has no chain function. Emit a
custom error message in this case instead of letting the
core generate one implying that this is some sort of core
bug. It's not, it just means that whatever got plugged
into the pipeline downstream when we announced the type
can only operate pull-based, while our source can only
operate push-based (e.g. http://foo/bar.mov ! qtdemux ! ...)
Error string has not been marked for translation yet, as
it probably needs some more work first.
(gst_type_find_element_get_best_possibility):
Add helper function to find the best of all available
found possibilities that qualify given the min. threshold.
(gst_type_find_element_handle_event):
Fix the case where we get an EOS while still in TYPEFIND
mode (we want to chose the best of all possible types,
not just the first type that happens to be in our unsorted
list of possible types).
(gst_type_find_element_chain):
Make sure we return GST_FLOW_ERROR when we errored out
in stop_typefinding(); also, don't just find the best of
all found type entries and then use the last examined
type entry, but actually use the best entry.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c: (free_entry),
(gst_type_find_element_chain):
Now that we're not leaking factories, make sure we keep references
to them while we need them.
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c: (find_peek),
(gst_type_find_element_chain):
Fix leaking element factories in typefinding.
Fix problem where we forgot about a probable type on non-seekable
files, and thus later mis-typefound it.
Original commit message from CVS:
2005-12-05 Andy Wingo <wingo@pobox.com>
patch by: Wim Taymans <wim@fluendo.com>
* libs/gst/base/gstbasetransform.c
(gst_base_transform_prepare_output_buf)
(gst_base_transform_buffer_alloc):
* plugins/elements/gstqueue.c (gst_queue_bufferalloc): Call
alloc_buffer_and_set_caps.
* gst/gstpad.c (gst_pad_alloc_buffer): Changed to not call
set_caps on the source pad.
(gst_pad_alloc_buffer_and_set_caps): New function, does what
alloc_buffer used to do. Fixes#322874.
* docs/gst/gstreamer-sections.txt:
* docs/design/part-negotiation.txt:
* docs/pwg/advanced-negotiation.xml: Update for the alloc_buffer
changes.
Original commit message from CVS:
document core plugins in a separate document just like all the
others
rename these plugins to something starting with core
Original commit message from CVS:
* gst/gst.c:
* plugins/elements/Makefile.am:
* plugins/elements/gstelements.c:
* plugins/elements/gstqueue.c:
move queue from core to the elements plugin
ç
Original commit message from CVS:
* check/Makefile.am:
look in the right place for elements, a lot more chance of
success
* gst/Makefile.am:
remove indexers and elements subdirs
* plugins/Makefile.am:
make indexers conditional
Original commit message from CVS:
* Makefile.am:
* configure.ac:
* plugins/elements/Makefile.am:
* plugins/elements/gstcapsfilter.c:
* plugins/elements/gstfilesink.c:
* plugins/elements/gstfilesrc.c:
* plugins/elements/gstidentity.c:
* plugins/indexers/Makefile.am:
do CVS surgery and related build fixery to move elements
and indexers in a new gstreamer/plugins directory, out of the
gst/ directory
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_event), (gst_base_sink_do_sync),
(gst_base_sink_activate_pull), (gst_base_sink_change_state):
Properly handle non GST_FORMAT_TIME segment
* gst/elements/gstidentity.c: (gst_identity_transform_ip):
Properly handle non GST_FORMAT_TIME segment
* gst/gstsegment.c:
This function is valid if the accumulator is 0 and the format
is different from the requested format.
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_event), (gst_base_transform_eventfunc):
The event virtual method is now properly implemented, with a default
handler
Sub classes should call the parent_class event method. They should
return FALSE if they had a problem handling the given event, or don't
want GstBaseTransform to send that even downstream
* gst/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_init), (gst_identity_event),
(gst_identity_transform_ip), (gst_identity_set_property),
(gst_identity_get_property):
* gst/elements/gstidentity.h:
Added the single-segment boolean property.
If set to TRUE, it will output a single segment of data, starting from
0, will eat up all incoming newsegment, and modify the timestamp of the
buffers accordingly
Original commit message from CVS:
* Makefile.am:
don't run checks if we don't have check
* common/check.mak:
remove the registry when running make torture
* docs/gst/gstreamer-sections.txt:
remove second multiply
* gst/gstqueue.c: (gst_queue_loop):
fix a compile warning when disabling debug
Original commit message from CVS:
* configure.ac:
* gst/Makefile.am:
* gst/base/Makefile.am:
* gst/check/Makefile.am:
* gst/elements/Makefile.am:
* gst/net/Makefile.am:
update LDFLAGS use some more
Original commit message from CVS:
* gst/elements/Makefile.am:
* gst/elements/gstfakesink.c: (gst_fake_sink_state_error_get_type):
* gst/elements/gstfakesrc.c: (gst_fake_src_data_get_type),
(gst_fake_src_sizetype_get_type), (gst_fake_src_filltype_get_type),
(gst_fake_src_init), (gst_fake_src_prepare_buffer),
(gst_fake_src_alloc_buffer), (gst_fake_src_get_size):
* gst/elements/gstfakesrc.h:
* gst/gstqueue.c: (queue_leaky_get_type):
correctly fix GEnumValues so that nick is the short lowercase
dashed tag
* tools/gst-inspect.c: (print_element_properties_info):
also show the nick, since it's useful to use from parse_launch
syntax
Fixes#322139
Original commit message from CVS:
2005-11-22 Andy Wingo <wingo@pobox.com>
* gst/gstevent.h (gst_event_new_new_segment)
(gst_event_parse_new_segment, gst_event_new_buffer_size)
(gst_event_parse_buffer_size, gst_ghost_pad_new_no_target):
Renamed from *_newsegment, *_buffersize, *_notarget.
* scripts/update-funcnames: New script, performs the changes
listed above.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* check/gst/gstevent.c (create_custom_events): Check that
FLUSH_STOP is serialized.
* check/elements/identity.c (event_func):
* check/elements/fakesrc.c (event_func): No stream lock, the core
takes it.
* gst/base/gstbasetransform.c (gst_base_transform_event): No more
stream lock taking, yay.
* gst/gstevent.h (GST_EVENT_FLUSH_STOP): Marked as serialized to
ensure that core takes the stream lock.
* gst/base/gstbasesrc.c (gst_base_src_do_seek): Update for stream
lock name change.
* gst/base/gstbasesink.c (gst_base_sink_event): No need to take
the stream lock for EOS, NEWSEGMENT, or FLUSH_STOP, the core does
it already. For the flush start we do take it though so we get the
right preroll state change messages.
* gst/gstqueue.c (gst_queue_sink_activate_push): No need to take
the stream lock here, the core does it for us.
* gst/gstpad.h (GST_PAD_GET_STREAM_LOCK): Renamed from
GST_STREAM_GET_LOCK.
(GST_PAD_STREAM_LOCK, GST_PAD_STREAM_TRYLOCK)
(GST_PAD_STREAM_UNLOCK, GST_PAD_STREAM_UNLOCK_FULL)
(GST_PAD_STREAM_LOCK_FULL): Renamed from GST_STREAM_*.
(GST_PAD_GET_PREROLL_LOCK): Renamed from GST_PREROLL_GET_LOCK.
(GST_PAD_PREROLL_LOCK, GST_PAD_PREROLL_TRYLOCK)
(GST_PAD_PREROLL_UNLOCK): Renamed from GST_PREROLL_*.
* gst/gstpad.c: Update for stream lock name change.
* gst/base/gstbasesink.c: Update for preroll lock name change.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* *.h:
* *.c: Ran scripts/update-macros. Oh yes.
* gst/gstobject.h (GST_OBJECT_GET_LOCK, GST_OBJECT_LOCK)
(GST_OBJECT_TRYLOCK, GST_OBJECT_UNLOCK): Renamed from
GST_GET_LOCK, etc.
* scripts/update-macros: New script. Run it on your files to
change GST_LOCK to GST_OBJECT_LOCK, and the same for UNLOCK as
well.
Original commit message from CVS:
* gst/elements/gstfdsrc.c: (_do_init), (gst_fdsrc_class_init),
(gst_fdsrc_init), (gst_fdsrc_dispose), (gst_fdsrc_set_property),
(gst_fdsrc_uri_get_type), (gst_fdsrc_uri_get_protocols),
(gst_fdsrc_uri_get_uri), (gst_fdsrc_uri_set_uri),
(gst_fdsrc_uri_handler_init):
* gst/elements/gstfdsrc.h:
Port fd:// URI handler from 0.8 to fdsrc
Original commit message from CVS:
* check/Makefile.am:
Enable valgrind check that should work fine now.
* gst/elements/gsttypefindelement.c: (gst_type_find_element_init):
* gst/gstqueue.c: (gst_queue_init):
Fix memleaks in pad allocation.
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_new_from_static_template):
* gst/gstpad.h:
add gst_pad_new_from_static_template functions
* gst/check/gstcheck.c: (gst_check_setup_src_pad),
(gst_check_setup_sink_pad):
* gst/elements/gsttee.c: (gst_tee_init):
and use them
Original commit message from CVS:
* gst/base/gstbasesrc.c: (gst_base_src_init):
* gst/elements/gsttypefindelement.c: (gst_type_find_element_init):
* gst/gstqueue.c: (gst_queue_init):
Free pad templates, fixes a couple of leaks.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object):
0 segment values are 0 in any format.
* gst/base/gstbasetransform.c: (gst_base_transform_event):
* gst/base/gstbasetransform.h:
Parse newsegment correctly in basetransform
* gst/elements/gstidentity.c: (gst_identity_transform_ip):
Sync to clock using updated segment values.
Original commit message from CVS:
2005-11-15 Andy Wingo <wingo@pobox.com>
* gst/elements/gstfakesrc.c (gst_fake_src_create): It's not an
error if the user selected "no clock" as the clocking method.
Original commit message from CVS:
2005-11-15 Andy Wingo <wingo@pobox.com>
* check/gst/gstpipeline.c (test_base_time): New test for buffer
timestamps with live capture.
* gst/elements/gstfakesrc.c (gst_fake_src_create): If the datarate
is 0 but we are a live source, timestamp the buffers using the
element's clock.
Original commit message from CVS:
2005-11-09 Andy Wingo <wingo@pobox.com>
* gst/elements/gstfilesink.c (gst_file_sink_start)
(gst_file_sink_stop): New functions, replace the state change
handler.
(gst_file_sink_class_init): Hook up the start and stop functions.
(gst_file_sink_base_init): Don't set the state change handler any
more. It was a bit ugly too, being set from here...
(gst_file_sink_get_property, gst_file_sink_set_property):
Cleanups...
(gst_file_sink_set_location): More robust check that doesn't call
GST_STATE. Ugggggg.
Original commit message from CVS:
* gst/gstbus.c: (gst_bus_class_init):
Fix some typos.
* gst/gstqueue.c: (gst_queue_loop):
Don't assume a miniobject that isn't a buffer is an
event (it could be that there is a refcounting
problem somewhere and the pointer is stale and
refers to an already destroyed miniobject).
Original commit message from CVS:
* docs/manual/advanced-position.xml:
Update seek example and explanations to current 0.9 API.
* gst/elements/gsttypefindelement.c:
(gst_type_find_element_activate):
Remove FIXME comment now that the found caps
are unreffed.
Original commit message from CVS:
2005-10-31 Andy Wingo <wingo@pobox.com>
* Boo!
* gst/gstqueue.c (gst_queue_chain): Fix downstream leaky mode.
* gst/gstobject.c (gst_object_dispatch_properties_changed): No
need to serialize property notifications on GLib 2.8. GLib 2.6 has
the possibility of deadlocks here if code calling notify() or
set() has a lock that can be taken in another notify handler (ABBA
with class lock and e.g. python GIL state lock).
Original commit message from CVS:
* gst/base/gstbasetransform.c: (gst_base_transform_class_init),
(gst_base_transform_init):
Don't leak class.
* gst/gstqueue.c: (gst_queue_handle_sink_event), (gst_queue_loop):
An EOS event marks the queue as completely filled.
Original commit message from CVS:
* gst/gstbus.c:
Doc fix.
* gst/gstqueue.c: (gst_queue_handle_sink_event), (gst_queue_chain),
(gst_queue_loop):
Fix potential deadlock when QUEUE_LOCK is taken before STREAM_LOCK.
Original commit message from CVS:
* gst/elements/gstfilesink.c: (gst_file_sink_do_seek),
(gst_file_sink_get_current_offset):
Use fseeko() and ftello() if available. When falling back on
lseek() to get the current offset, fflush() first to make sure
everything is up-to-date and we get the right offset.
Original commit message from CVS:
* docs/design/part-segments.txt:
More docs.
* gst/elements/gstcapsfilter.c: (gst_capsfilter_prepare_buf):
Correctly set caps, even on the subbufer.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_get_position),
(gst_base_sink_query):
Speed up current position calculation.
* gst/base/gstbasesrc.c: (gst_base_src_query),
(gst_base_src_default_newsegment):
Correctly set stream position in newsegment.
* gst/gstbin.c: (gst_bin_add_func), (add_to_queue),
(update_degree), (gst_bin_sort_iterator_next),
(gst_bin_sort_iterator_resync), (gst_bin_sort_iterator_free):
* gst/gstmessage.c: (gst_message_new_custom):
Clean up debugging info
* gst/gstqueue.c: (gst_queue_link_src), (gst_queue_chain),
(gst_queue_loop), (gst_queue_handle_src_query):
Pause task faster.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_handle_object), (gst_base_sink_query), (do_playing):
* gst/base/gstbasesrc.c: (gst_base_src_query):
* gst/elements/gstfilesink.c: (gst_file_sink_query):
* gst/elements/gsttypefindelement.c:
(gst_type_find_handle_src_query), (find_element_get_length),
(gst_type_find_element_activate):
API change fix.
* gst/gstquery.c: (gst_query_new_position),
(gst_query_set_position), (gst_query_parse_position),
(gst_query_new_duration), (gst_query_set_duration),
(gst_query_parse_duration), (gst_query_set_segment),
(gst_query_parse_segment):
* gst/gstquery.h:
Bundling query position/duration is not a good idea since duration
does not change much and we don't want to recalculate it for every
position query, so they are separated again..
Base value in segment query is not needed.
* gst/gstqueue.c: (gst_queue_handle_src_query):
* gst/gstutils.c: (gst_element_query_position),
(gst_element_query_duration), (gst_pad_query_position),
(gst_pad_query_duration):
* gst/gstutils.h:
Updates for query API change.
Added some docs here and there.
Original commit message from CVS:
* configure.ac:
correctly make conditionals
* gst/elements/Makefile.am:
* gst/elements/gstelements.c:
fix typo causing fdsrc not to build
Original commit message from CVS:
* configure.ac:
check for some headers
* gst/elements/Makefile.am:
* gst/elements/gstelements.c:
don't compile fdsrc without sys/socket.h
* gst/indexers/Makefile.am:
* gst/indexers/gstindexers.c: (plugin_init):
don't compile fileindex without mmap
Original commit message from CVS:
* gst/elements/gstfakesink.c: (gst_fake_sink_render):
* gst/elements/gstfakesrc.c: (gst_fake_src_create):
Beautify 'last-message' output: print 'none' for buffer timestamps
and durations if none is set; improve alignment with next messages.
