This can happen for example when downstream proposed new caps, later proposed
the previous caps again which in turn enables passthrough mode in upstream
elements and the wrong-sized buffer appears in an element where the caps
change never happened. Simply allocate a new buffer in this case.
See bug #635461.
Only update the last_stop value when we had a valid stop position for the
clipping or else the clipping code assumes the stop position extends to the end
of the segment, which makes the position reporting return weird values.
Unify the different position reporting code paths to make it more
understandable.
Use start_time to get more accurate position reporting in paused.
Fix unit tests for more accurate reporting.
This reverts commit 80727c1177.
This doesn't make sense. gst_data_queue_new_full() is already
documented above. And we need the doc blurb for _new() here.
Use atomic ops to read and write more properties. Taking the preroll lock in get_property
can lock up applications reading the property during preroll.
Because of the awkward refcounting in prepare_output_buffer, we might end up
with writable buffers that point to the same data. Check for those cases so that
we avoid a useless memcpy and keep valgrind quiet.
Fixes#628176
Add a function to retrieve a list of buffers containing the first N bytes from
the adapter. This can be done without a memcpy and should make it possible to
transfer the list to a GstBufferList later.
Make code including GStreamer headers compile with -Wcast-qual by
maintaining const-ness when casting. Also fix function signature of
gst_byte_writer_set_pos(): the byte writer should not be marked as
const.
https://bugzilla.gnome.org/show_bug.cgi?id=627910
Sets up a GST_PKG_CONFIG_PATH variable for use in Makefile.am
(avoids trailing ':' in PKG_CONFIG_PATH used). A useful side
effect of this is also that the PKG_CONFIG_PATH environment
is now logged in the configure output.
When we are handling a buffer and need to allocate an output buffer, handle the
case when downstream suggests us a format that we can't convert the input buffer
to. In that case, check if there is another format available downstream instead
of failing.
Fixes#621332 and see also #614296
If initially pass-through caps are negotiated between a transform element's
sink and src pads, but then the downstream element returns different caps
on a buffer from pad_alloc(), basetransform gets stuck with proxy_alloc=TRUE
even though the upstream peer doesn't accept the caps, causing
gst_pad_peer_accept_caps() to be called on each buffer in _buffer_alloc():
if (!gst_caps_is_equal (newcaps, caps)) {
GST_DEBUG_OBJECT (trans, "caps are new");
/* we have new caps, see if we can proxy downstream */
>> if (gst_pad_peer_accept_caps (pad, newcaps)) {
/* peer accepts the caps, return a buffer in this format */
GST_DEBUG_OBJECT (trans, "peer accepted new caps");
which is taking ~40ms/frame.
This patch does two things. (1) if the buffer returned from pad_alloc() has
new caps, trigger the decision whether to proxy the buffer-alloc to be
revisited, and (2) disable proxy if peer does not accept new caps. (The first
part may not be strictly needed, but seemed like a good idea.)
Note that this issue would not arise except in case of downstream elements
who have on their template-caps, some that would be suitable for pass-through,
but at runtime pick more restrictive caps (for ex, after querying a driver for
what formats it actually supports).
When basetransform received an unsupported caps on pad_alloc
it just returned not-negotiated. This patch makes it query
the allowed caps between his sinkpad and upstream's srcpad
to find a caps to suggest.
This happens when dinamically switching pipeline elements
and upstream pad_allocs with the previous caps that was
being used.
Fixes#614296
Add a new enable-last-buffer property. When false, it disables storing the last
received buffer in basesink::last-buffer. This can be useful in cases where
buffers need to be released asap.
API: GstBaseSink::enable-last-buffer
Retain the last scanned buffer entry and offset, so we can resume buffer
scanning there in case of a typical progressive scan.
Also potentially optimize _copy subsequently occurring in that area.
Allow subclasses to override the acceptcaps function because in some cases a
custom implementation can be much much faster than the default one.
See #621190
Point g-ir-scanner to the .la file of our library, which hopefully
makes it find the right dependencies in all cases (ie. our locally
built libgstreamer and not the system-installed one). This is also
how it's done in Gtk+ and how it's documented in the wiki, see
http://live.gnome.org/GObjectIntrospection/AutotoolsIntegration
Based on patches by Vincent Untz and Alan Knowles.
Fixes#603710.
Our own pkgconfig directory should come first, so that pkg-config uses
the in-tree libgstreamer and not some external one when --pkg=gstreamer-0.10
is passed to g-ir-scanner.
See #603710.
As the headers were broken in 0.10.26 the functions weren't really
usable back then, so we should advertise them as being there only
since 0.10.27.
Spotted by Mart Raudsepp.
When doing pad_allocs, use non-fixed caps suggestions and
try to fixate them before using. This makes possible to
have suggested buffer size with 0 in basetransform just
to signal upstream a renegotiation is needed
Fixes#576234Fixes#609046
Adds that warning to configure.ac
Includes a tiny change of the GST_BOILERPLATE_FULL() macro:
The get_type() function is no longer declared before being defined.
https://bugzilla.gnome.org/show_bug.cgi?id=611692
The functions are called gst_byte_writer_put_{float32|float64}_*() and not
gst_byte_writer_put_{float|double}_*().
Spotted by: Benjamin Otte <otte@redhat.com>
_get_range() is a pad function set by ourselves, therefore we're certain that
the parent is a GstBaseSrc.
Speeds up _get_range by 38%, and the total call by 30%. (valgrind instruction
calls measurements).
Fixes#610246
Adds a new function to GstByteWriter that writes
a constant value to a memory area (aka memset).
Useful for adding padding to buffers.
Also updates .def file and docs.
API: gst_byte_writer_fill()
Updating the segment values must only be done while holding the
STREAM_LOCK and OBJECT_LOCK. This means, reading can be done as
long as one of them is held, not both, which removes some lock-unlock
blocks from performance critical code paths.
Also document, that gst_base_src_set_format() *must* be called in
states <= READY and add an assertion for this. Changing the format
later will completely mess up the segment information.
gst_byte_writer_reset_and_get_buffer wasn't declared
in .h, instead there was _reset_and_get_data_as_buffer.
Replace it with the real function name, that is smaller
and matches gst_byte_writer_free_and_get_buffer
https://bugzilla.gnome.org/show_bug.cgi?id=608726
For the reason outlined at the beginning of gst_private.h (inline
functions in glib may need the g_log_domain variable). Also include
gst_private.h before using any G_OS_* defines, esp. in plugin loader.
Add a method to perform get_range typefinding that also uses the
uri/location extension as an extra hint. It will first try to call the
typefind functions of the factories that handle the given extension. The result
is that in the common case, we only call one typefind function, which speeds up
the typefinding a lot.
Make sure we take ownership of the buffer early without increasing its refcount
when we go in the collect function. This reduces the amount of copies needed in
order to make the buffer writable in most cases.
In some cases we can avoid allocating a subbuffer and instead simply ref
the buffer. Callers should perform _make_metadata_writable() in all
cases now.
Add a method to install a clipping function that is called when a buffer is
received. Users of collectpads can then perform clipping on the incomming
buffers.
Also retab the header file a little.
See #590265
This allows demuxers to update the segment stop of an already
finished stream. This might be needed if some stream goes to
EOS before the duration of the longest stream is known to properly
set the segment stop of all streams to the same value in the end.
Set the pad flushing and stop the pad task when the initial seek fails
during activation. Avoids racy calls into the _create() function when
BaseSrc::stop() has already run.
Fixes: #603059
Also, fix some misspelled comments.
Rounding errors with the floating point rate could make it so that we
don't end up exactly at the required stepping duration.
Use the segment clipping boundaries, which are not subject to rate
adjustements, instead to detect when we reached the stepping duration.
Add some debug info related to going to the PAUSED state.
Some gcc versions warn about bytewriter writing to memory accessed
via a const guint8 pointer, despite our explicit cast to guint8 *.
Work around that by using an intermediary variable.
Fixes#598526.
When clamping the base time, correctly use 'now', instead of
'-now' - the intent is to prevent 'now-base' ever being
negative, which would cause a position report outside the segment.
Fixes: #602419
Element base_time is a signed quantity, which leads to basesink returning
a position of 0 when dealing with a negative base time - which are quite
legal when clocks (such as the audio clock) are close to 0.
This doesn't manifest in normal pipelines, of course - but can happen
(at least) when manually setting the base time on a pipeline.
This avoids:
* triple-checking for the GType when type-checking is enabled (see #597260)
* Avoids going through an expensive no-argument checking which landed in
glib-2.22
* Avoids going through 2 extrac functions (g_object_new -> g_object_new_valist)
There's not much point in using GST_DEBUG_FUNCPTR with GObject
virtual functions such as get_property, set_propery, finalize and
dispose, since they'll never be used by anyone anyway. Saves a
few bytes and possibly a tenth of a polar bear.
This avoids having to do the sorting everytime we use typefind
The behaviour of gst_type_find_factory_get_list has subtlely changed
in the sense that the order was previously undefined, whereas now
it returns them sorted by rank and then by name.
The list against which we run the comparefunc will only contain
GstPluginFeature, therefore remove the 6 expensive type checks we do
for every single comparision.
When we quickly switch from PLAYING to PAUSED and back to PLAYING it's possible
in some cases that the task refuses to start, This is because when we go to
PAUSED, we unschedule the clock timeout, which could return UNSCHEDULED when
we're back to PLAYING, causing the task to PAUSE again with a wrong-state.
This patch checks if we are running when we return with an UNSCHEDULED return
value and if we are, try to create a new buffer.
Fixes#597550
The code was previously:
* checking if ret was != OK
* .. but if it was FLOW_STEP, swith it to OK
* .. and then not using ret
Instead we just make it more compact by checking if it's OK or STEP.
In most places in core and baseclasses we just need the caps to do caps-
intersections. In that case ref'ed caps are enough (no need to copy).
This patch also switches the code to use the new functions.
API: gst_pad_get_caps_refed(), gst_pad_peer_get_caps_refed()
The normal functions are always useful to have for bindings, especially
runtime-created bindings like Seed or new GObject-Introspection based
Python bindings.
