Original commit message from CVS:
* docs/libs/gst-plugins-base-libs-sections.txt:
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_convert),
(gst_ring_buffer_activate), (gst_ring_buffer_is_active):
* gst-libs/gst/audio/gstringbuffer.h:
Add methods to more accuratly control the pulling thread of a
ringbuffer.
Add format conversion helper code to the ringbuffer.
API: GstRingBuffer:gst_ring_buffer_activate()
API: GstRingBuffer:gst_ring_buffer_is_active()
API: GstRingBuffer:gst_ring_buffer_convert()
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.c:
(gst_ring_buffer_prepare_read):
In pull mode we want the callback to prepull a buffer we can preroll on
even when we are not yet playing.
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_start),
(gst_ring_buffer_stop):
Also allow the case where the ringbuffer was paused when we try to stop
it so that the basesrc stop function is still called.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_query):
Report the latency with the new seglatency parameter.
* gst-libs/gst/audio/gstringbuffer.c:
(gst_ring_buffer_debug_spec_buff), (gst_ring_buffer_parse_caps),
(gst_ring_buffer_acquire):
* gst-libs/gst/audio/gstringbuffer.h:
Add new field to the ringbufferspec to specify the expected latency
between the underlying device read/write pointer, this is needed
when writing sinks that sit a little closer to the hardware.
Add some more docs for other fields.
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_may_start):
Use g_atomic_int_set() instead of gst_atomic_int_set().
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_parse_caps):
* gst-libs/gst/audio/gstringbuffer.h:
Rename recently added buffer types to make more sense.
* ext/alsa/gstalsasink.c: (alsasink_parse_spec),
(gst_alsasink_write):
Adapt for above API changes.
Fixes bug #520523.
Original commit message from CVS:
2008-02-29 Julien Moutte <julien@fluendo.com>
* ext/alsa/gstalsa.c: (gst_alsa_open_iec958_pcm),
(gst_alsa_probe_supported_formats): Probe for IEC958 pcm to
detect
if we can do SPDIF output.
* ext/alsa/gstalsa.h:
* ext/alsa/gstalsasink.c: (set_hwparams), (alsasink_parse_spec),
(gst_alsasink_prepare), (gst_alsasink_close),
(gst_alsasink_write):
* ext/alsa/gstalsasink.h: Initial support for SPDIF.
* gst-libs/gst/audio/gstringbuffer.c:
(gst_ring_buffer_parse_caps):
* gst-libs/gst/audio/gstringbuffer.h: Add non linear buffer
types
to support AC3, EC3 and IEC958 buffers.
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiosink.c: (audioringbuffer_thread_func),
(gst_audioringbuffer_open_device),
(gst_audioringbuffer_close_device), (gst_audioringbuffer_acquire),
(gst_audioringbuffer_release), (gst_audioringbuffer_start),
(gst_audioringbuffer_pause), (gst_audioringbuffer_stop),
(gst_audio_sink_create_ringbuffer):
Improve debug output.
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_start),
(gst_ring_buffer_pause), (gst_ring_buffer_delay):
Prevent some functions from doing things and failing when the
ringbuffer is not yet acquired.
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
* gst-libs/gst/audio/gstringbuffer.c: (build_linear_format),
(gst_ring_buffer_parse_caps):
Return NULL instead of an enum that happens to be 0, fixes warning
on MSVC (#492114).
* gst-libs/gst/audio/gstringbuffer.h:
No trailing commas in enum list (for gcc-2.9x).
* gst/videotestsrc/videotestsrc.c: (random_char):
Make information loss explicit instead of implicitly truncating to
eight bits via the return value. Fixes runtime error on MSVC when
using the debug CRT (#492114).
* win32/common/config.h.in:
Fix a bunch of '#undef FOO bar', which MSVC doesn't like (#492114).
* win32/common/libgstinterfaces.def:
* win32/common/libgstrtp.def:
Export a few more symbols (#492114).
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiosink.c: (audioringbuffer_thread_func):
* gst-libs/gst/audio/gstaudiosrc.c: (audioringbuffer_thread_func):
Improve debugging.
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_query), (gst_base_audio_sink_event),
(gst_base_audio_sink_render), (gst_base_audio_sink_async_play):
Improve latency and clock slaving calculations.
Improve slave clock calibration.
* gst-libs/gst/audio/gstringbuffer.c:
(gst_ring_buffer_commit_full):
When we are asked to render N sample to 0 bytes, return N.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_event), (gst_base_audio_sink_render):
* gst-libs/gst/audio/gstbaseaudiosink.h:
Make the clock sync code more accurate wrt resampling and playback
at different rates.
* gst-libs/gst/audio/gstringbuffer.c:
(gst_ring_buffer_commit_full), (gst_ring_buffer_commit):
* gst-libs/gst/audio/gstringbuffer.h:
Use better algorithm to interpolate sample rates.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_event), (gst_base_audio_sink_render):
* gst-libs/gst/audio/gstbaseaudiosink.h:
Extract rate from the NEWSEGMENT event.
Use commit_full to also take rate adjustment into account when writing
samples to the ringbuffer.
* gst-libs/gst/audio/gstringbuffer.c:
(gst_ring_buffer_commit_full), (gst_ring_buffer_commit),
(gst_ring_buffer_read):
* gst-libs/gst/audio/gstringbuffer.h:
Added _commit_full() to also take rate into account.
Use simple interpolation algorithm to resample audio.
API: gst_ring_buffer_commit_full()
* tests/examples/seek/scrubby.c: (speed_cb), (do_seek):
* tests/examples/seek/seek.c: (segment_done):
Don't try to seek with 0.0 rate, just pause instead.
Remove bogus debug line.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_render):
Add some more info in a WARNING.
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create):
Handle PAUSE in create function, use new -core addition to
wait for playing. Fixes pausing and resuming capture from an
audiosrc.
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_commit),
(gst_ring_buffer_read):
Constify some more.
Caller supports interrupted reads now.
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.c:
(gst_ring_buffer_samples_done), (gst_ring_buffer_commit),
(gst_ring_buffer_read):
Early morning compilation fix.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_get_time), (gst_base_audio_sink_callback):
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_get_time), (gst_base_audio_src_fixate),
(gst_base_audio_src_get_times), (gst_base_audio_src_get_offset),
(gst_base_audio_src_create), (gst_base_audio_src_change_state):
Do the delay calculation in the source/sink base classes as this is
specific for the capture/playback mode.
Try to fixate a bit better, like round depth up to a multiple of 8
bigger than width.
Handle underruns correctly by marking DISCONT on buffers and adjusting
timestamps to handle the gap.
Set offset/offset_end correctly on buffers.
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_pause),
(gst_ring_buffer_samples_done), (gst_ring_buffer_commit),
(gst_ring_buffer_read):
Remove resync and underrun recovery from the ringbuffer.
Fix ringbuffer read code on under/overrun.
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (set_hwparams), (gst_alsasink_prepare):
Don't try to calculate silence samples, base class does this much
better now.
* gst-libs/gst/audio/gstringbuffer.c: (build_linear_format),
(gst_ring_buffer_debug_spec_caps), (gst_ring_buffer_parse_caps),
(gst_ring_buffer_acquire):
Calculate silence samples correctly.
* gst-libs/gst/audio/gstringbuffer.h:
Add _CAST macro.
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiosink.c: (audioringbuffer_thread_func),
(gst_audioringbuffer_finalize), (gst_audioringbuffer_acquire),
(gst_audioringbuffer_release), (gst_audioringbuffer_stop):
Fix leak.
Avoid type casting when we can.
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_dispose):
Fix mem leak.
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (set_hwparams), (gst_alsasink_prepare):
* gst-libs/gst/audio/gstringbuffer.c: (build_linear_format),
(gst_ring_buffer_debug_spec_caps), (gst_ring_buffer_parse_caps):
Revert last two changes that broke the freeze.
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.c: (build_linear_format),
(gst_ring_buffer_debug_spec_caps), (gst_ring_buffer_parse_caps):
Calculate correct silence samples so we don't fill our ringbuffer
with noise.
Original commit message from CVS:
* docs/libs/Makefile.am:
* docs/libs/gst-plugins-base-libs-docs.sgml:
* docs/libs/gst-plugins-base-libs-sections.txt:
* docs/libs/gst-plugins-base-libs.types:
add remaining symbols into correct setions
* gst-libs/gst/audio/gstringbuffer.c:
fix incomplete docs
* gst-libs/gst/audio/gstringbuffer.h:
comment out not yet implemented function
* gst-libs/gst/floatcast/floatcast.h:
* gst-libs/gst/netbuffer/gstnetbuffer.c:
add short descriptions
* gst-libs/gst/interfaces/propertyprobe.c:
fix return value docs
* gst-libs/gst/riff/riff-read.c: (gst_riff_read_chunk):
simplify debug logging
* gst-libs/gst/riff/riff-read.h:
sync function prototype and docs
* gst-libs/gst/rtp/gstbasertpaudiopayload.h:
remove left over symbol
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_class_init), (gst_base_audio_sink_setcaps):
* gst-libs/gst/audio/gstbaseaudiosink.h:
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_parse_caps),
(gst_ring_buffer_samples_done):
* gst-libs/gst/audio/gstringbuffer.h:
Document better the fact that latency_time and buffer_time are values
stored in microseconds, and not the usual GStreamer nanoseconds.
Change the variables (compatibly) that store them from GstClockTime
to guint64 to make it more clear that they're not storing clock times.
Also, remove the bogus property description that says the user can
specify -1 to get the default value, since that's never been the case.
When computing the default segment size for the ring buffer, make it
an integer number of samples.
When the sub-class indicates a delay greater than the number of
samples we've written return 0 from the audio sink get_time method.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_change_state):
* gst-libs/gst/audio/gstringbuffer.c: (wait_segment),
(gst_ring_buffer_may_start):
* gst-libs/gst/audio/gstringbuffer.h:
Only start playback if we are playing.
should fix#330748.
Original commit message from CVS:
* docs/libs/gst-plugins-base-libs-docs.sgml:
* docs/libs/gst-plugins-base-libs-sections.txt:
* docs/libs/gst-plugins-base-libs.types:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-base-plugins-docs.sgml:
* docs/plugins/gst-plugins-base-plugins-sections.txt:
Added some more docs to libs and plugins.
* gst-libs/gst/audio/gstringbuffer.c:
(gst_ring_buffer_prepare_read), (gst_ring_buffer_clear):
* gst-libs/gst/audio/gstringbuffer.h:
Document ringbuffer some more.
* gst/videorate/gstvideorate.c: (gst_video_rate_class_init),
(gst_video_rate_setcaps), (gst_video_rate_reset),
(gst_video_rate_init), (gst_video_rate_flush_prev),
(gst_video_rate_swap_prev), (gst_video_rate_event),
(gst_video_rate_chain), (gst_video_rate_change_state):
* gst/videorate/gstvideorate.h:
Fix videorate to use segments.
Make it work with 0/1 framerates (closes#331903)
Handle EOS correctly.
Added docs.
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.c:
(gst_ring_buffer_pause_unlocked), (gst_ring_buffer_delay),
(gst_ring_buffer_samples_done), (wait_segment),
(gst_ring_buffer_commit), (gst_ring_buffer_clear):
Add some compiler G_(UN_)LIKELY help.
SIGNAL the ringbuffer waiters when going to PAUSED as well to
make sure they can exit their functions. Should fix#330748
Original commit message from CVS:
2006-02-09 Andy Wingo <wingo@pobox.com>
* gst-libs/gst/audio/gstringbuffer.c
(gst_ring_buffer_samples_done): Cast to guint64, fixes an integer
overflow after 13.5 hours of recording. Kapow!
* ext/alsa/gstalsasrc.c (gst_alsasrc_delay): Clamp the delay to
the buffer size -- we don't care about underrun/overrun reporting
right now, just need to return a useful value.
Original commit message from CVS:
* gst-libs/gst/audio/gstaudiosink.c:
(gst_audioringbuffer_class_init), (gst_audioringbuffer_release),
(gst_audioringbuffer_pause):
Implement pause that does not wait for completion.
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_render), (gst_base_audio_sink_change_state):
Don't drop buffers when going to PAUSED but perform preroll on
remaining samples now that core base class supports this.
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_release),
(gst_ring_buffer_pause_unlocked), (gst_ring_buffer_stop),
(gst_ring_buffer_commit):
Pause should not signal waiters.
Implement return value of _commit correctly.
Original commit message from CVS:
Reviewed by: Tim-Philipp Müller <tim at centricular dot net>
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_parse_caps):
Set depth and width for alaw/mulaw (fixes#326601).
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_init),
(gst_ring_buffer_set_flushing), (gst_ring_buffer_start),
(gst_ring_buffer_pause), (wait_segment):
* gst-libs/gst/audio/gstringbuffer.h:
Name (private) union, makes Forte compiler happy (this time
for real) (#324900).
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_init),
(gst_ring_buffer_set_flushing), (gst_ring_buffer_start),
(gst_ring_buffer_pause), (wait_segment):
* gst-libs/gst/audio/gstringbuffer.h:
Sun's Forte compiler doesn't seem to like anonymous structs,
so use same setup as in GstBaseSrc (fixes#324900).
Original commit message from CVS:
* gst-libs/gst/audio/TODO:
Updated TODO
* gst-libs/gst/audio/gstaudiosink.c:
(gst_audioringbuffer_open_device),
(gst_audioringbuffer_close_device), (gst_audioringbuffer_acquire),
(gst_audioringbuffer_release):
Small cleanups.
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_class_init), (gst_base_audio_sink_render),
(gst_base_audio_sink_change_state):
Slave to the master clock when going to PLAYING and unslave when
going to PAUSED.
* gst-libs/gst/audio/gstringbuffer.c:
(gst_ring_buffer_open_device), (gst_ring_buffer_close_device),
(gst_ring_buffer_acquire), (gst_ring_buffer_release),
(gst_ring_buffer_samples_done), (gst_ring_buffer_set_sample),
(gst_ring_buffer_clear_all), (wait_segment),
(gst_ring_buffer_commit), (gst_ring_buffer_read),
(gst_ring_buffer_advance):
* gst-libs/gst/audio/gstringbuffer.h:
Add some docs and cleanups.
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_read):
If we are reading too slowly, jump forward in the ringbuffer
instead of blocking.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_provide_clock),
(gst_base_audio_sink_change_state):
Set ringbuffer to non-flushing when going to PAUSED, set to
flushing again when going to READY.
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_init),
(gst_ring_buffer_stop):
Start in flushing mode by default.
Don't set flushing in the _stop method, let the app call
this explicitly.
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_stop):
Set ringbuffer to flushing when stopping so that we don't
block on wait_segment anymore and livelock.
Original commit message from CVS:
* gst-libs/gst/audio/gstbaseaudiosink.c:
(gst_base_audio_sink_event), (gst_base_audio_sink_get_offset),
(gst_base_audio_sink_render):
* gst-libs/gst/audio/gstringbuffer.c:
(gst_ring_buffer_open_device), (gst_ring_buffer_close_device),
(gst_ring_buffer_set_flushing), (gst_ring_buffer_start),
(gst_ring_buffer_pause_unlocked), (gst_ring_buffer_pause),
(gst_ring_buffer_stop), (wait_segment), (gst_ring_buffer_commit),
(gst_ring_buffer_read):
* gst-libs/gst/audio/gstringbuffer.h:
Add flushing mode to the ringbuffer so that it in all cases does
not try to handle more audio. This makes sure it does not try to
block anymore when flushing and fixes a livelock.
Original commit message from CVS:
* gst-libs/gst/audio/gstringbuffer.c: (gst_ring_buffer_commit),
(gst_ring_buffer_read), (gst_ring_buffer_clear):
Don't assert on normal stuff.
* gst/playback/gstplaybin.c: (do_playbin_seek):
API fix.
