Without this it might happen that received data from the DTLS transport
is already passed to sctpdec before its state was set to PLAYING. This
would cause the data to be dropped, GST_FLOW_FLUSHING to be returned and
the whole DTLS transport to shut down.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/issues/1172
among other things.
Using a GCond can easily lead to deadlocks and only duplicates the
waiting code from gstpad.c in the best case.
In this case it actually could lead to a deadlock if both RTP and RTCP
were waiting. Only one of them would be woken up because g_cond_signal()
was used instead of g_cond_broadcast().
Change how content-length is set for HTTP POST headers, letting curl set
the header (given the content-length) instead of manually writing it.
This enables curl to know the content-length of the data.
In curl 7.66, if curl does not know the content-length (e.g. when
manually writing the header) curl will use Transfer-Encoding: chunked,
which might not be desired.
Use a double instead of a plain float for intermediary
property values, so we have enough bits to store INT_MAX
and it doesn't get rounded and wrapped to -1 when cast
back to a 32-bit integer.
Fixes criticals like
g_param_spec_int: assertion 'default_value >= minimum && default_value <= maximum' failed
when loading LADSPA plugins from the Linux Studio Plugins
Project (http://lsp-plug.in) in GStreamer.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/issues/1194
The avtpsink element is expected to transmit AVTPDUs at specific times,
according to GstBuffer timestamps. Currently, the transmission time is
controlled in software via the rendering synchronization mechanism
provided by GstBaseSink class. However, that mechanism may not cope with
some AVB use-cases such as Class A streams, where AVTPDUs are expected
to be transmitted at every 125 us. Thus, this patch introduces avtpsink
own mechanism which leverages the socket transmission scheduling
infrastructure introduced in Linux kernel 4.19. When supported by the
NIC, the transmission scheduling is offloaded to the hardware, improving
transmission time accuracy considerably.
To illustrate that, a before-after experiment was carried out. The
experimental setup consisted in 2 PCs with Intel i210 card connected
back-to-back running an up-to-date Archlinux with kernel 5.3.1. In one
host gst-launch-1.0 was used to generate a 2-minute Class A stream while
the other host captured the packets. The metric under evaluation is the
transmission interval and it is measured by checking the 'time_delta'
information from ethernet frames captured at the receiving side.
The table below shows the outcome for a 48 kHz, 16-bit sample, stereo
audio stream. The unit is nanoseconds.
| Mean | Stdev | Min | Max | Range |
-------+--------+---------+---------+---------+---------+
Before | 125000 │ 2401 │ 110056 │ 288432 │ 178376 |
After | 125000 │ 18 │ 124943 │ 125055 │ 112 |
Before this patch, the transmission interval mean is equal to the
optimal value (Class A stream -> 125 us interval), and it is kept the
same after the patch. The dispersion measurements, however, had
improved considerably, meaning the system is now consistently
transmitting AVTPDUs at the correct time.
Finally, the socket transmission scheduling infrastructure requires the
system clock to be synchronized with PTP clock so this patches modifies
the AVTP plugin documentation to cover how to achieve that.
This patch refactors gst_avtp_sink_start() by moving all socket
initialization code to its own function. This change prepares the code
to the next patch which will introduce avtpsink's own rendering
synchronization mechanism.
Current avtpsink code opens the AF_PACKET socket with SOCK_NONBLOCK
option. However, we actually want sendto() to block in case there isn't
available space in socket buffer.
This patch refactors both avtpsink and avtpsrc code so we use the
if_nametoindex() helper instead of building a request and issuing an
ioctl to get the if_index.
The receive bin should block buffers from reaching dtlsdec before
the dtls connection has started.
While there was code to block its sinkpads until receive_state
was different from BLOCK, nothing was ever setting it to BLOCK
in the first place. This commit corrects this by setting the
initial state to BLOCK, directly in the constructor.
In addition, now that blocking is effective, we want to only
block buffers and buffer lists, as that's what might trigger
errors, we want to still let events and queries go through,
not doing so causes immediate deadlocks when linking the
bin.
And free data with the correct free() function in the receive callback
by passing it to gst_buffer_new_wrapped_full() instead of
gst_buffer_new_wrapped().
When a pipeline is stopped (actually when the waylandsink element
state changes from PAUSED to READY) the video surface is cleared, but
the opaque black surface behind is not. Fix this by actually clearing
both surfaces.
We need the streams' pt maps updated before requesting pads
on rtpbin, because this is what will trigger the requesting
of FEC encoders, and our handler for this request looks for
the payload types in the relevant stream's pt map.
Fixes#1187
Otherwise we would start sending data to the DTLS connection before, and
the DTLS elements consider this an error.
Also RFC 8261 mentions:
o A DTLS connection MUST be established before an SCTP association can
be set up.
For us it can happen that the DTLS transports are still in the process
of connecting while the ICE transport is already completed. This
situation is not specified in the spec but conceptually that means it is
still in the process of connecting.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/issues/758
Previously we simply logged errors but never reported them to elements
or even to the user. Fatal errors are now properly reported.
Additionally proper connection closing is implemented based on EOS:
- dtlsenc: EOS will cause close_notify to be sent to the peer and only
if the peer also sent back close_notify we will forward the
EOS event.
- dtlsdec: EOS will be forwarded normally, this only means that the
unterlying transport was closed. On receiving a DTLS packet
containing close_notify, return EOS and send EOS downstream.
We don't have any mid before parsing the SDP, which happens after we
handled the SDP answer and that usually happens long after ICE candidate
gathering is finished.
Without this all transceivers are considered inactive and as such ICE
gathering is for active transceiver was considered complete from the
very beginning.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/issues/1126
We don't support stopping RTP receivers currently so let's not consider
them all stopped all the time. This fixes some of the ICE/DTLS state
change handling and specifically fixes the ICE gathering state.
Previously the ICE gathering state was immediately going from NEW to
COMPLETE because it considered all transceivers stopped and as such all
activate transceivers were finished gathering ICE candidates.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/issues/1126
xdg_shell fullscreen mode doesn't work for committing
xdg_surface without configure acknowledgement.
In addition, we can't set different surface setting from
acknowledged config in this mode.
AES128 support was added since nettle version 3.0
../subprojects/gst-plugins-bad/ext/hls/gsthlsdemux.h:110:10: error: field ‘ctx’ has incomplete type
struct CBC_CTX (struct aes128_ctx, AES_BLOCK_SIZE) aes_ctx;
Add static or dynamic mpd with:
- baseURL
- period
- adaptation_set
- representaton
- SegmentList
- SegmentURL
- SegmentTemplate
Support multiple audio and video streams.
Pass conformance test with DashIF.org
Instead of always going through the file system API we allow the
application to modify the behaviour. For the playlist itself and
fragments, the application can provide a GOutputStream. In addition the
sink notifies the application whenever a fragment can be deleted.
The SVT-HEVC (Scalable Video Technology[0] for HEVC) Encoder is an
open source video coding technology[1] that is highly optimized for
Intel Xeon Scalable processors and Intel Xeon D processors.
[0] https://01.org/svt
[1] https://github.com/OpenVisualCloud/SVT-HEVC
It cleans up videoFormat by combining the wl_shm_formats and
drm_formats into a single table that represents the same format.
In addition, it adds NV61 format to the waylandsink.
commit 6adfb120ab added this flag to fix
builds with `-Werror`, and afterwards it was changed to use a version
check when newer versions of openexr moved over to C++11.
However, some distros have backported patches to older openexr
versions which make it require C++11, which makes the version check
incorrect and causes an error because we passed `-Werror -std=c++98`.
Instead, directly check when usage of the header requires `-std=c++98`
with `-Werror` and override the `cpp_std` setting on the target.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/issues/1117
Includes a new GstVulkanHandlePool base class for pooling different
resources togther. The descriptor cache object is ported to
GstVulkanHandlePool with the exact same functionality.
A new GstVulkanFenceCache is also implemented for caching fences
which is used internally by GstVulkanDevice for creating or reusing
fences.
The existing GstVulkanTrashFenceList object now caches trash objects.
Part 1 is a base class (vkvideofilter) that handles instance, device,
queue retrieval and holding that has been moved to the library
Part 2 is a fullscreenrenderquad that is still in the plugin that
performs all of the previous vulkan-specific functionality.
Based on Stream ID, the application can accept or reject the connection,
select the desired data stream, or set an appropriate passphrase for the
connection. Example usage:
srt://127.0.0.1:1234?streamid=mystream
Current code would change any non-ok return from gst_pad_push to
GST_FLOW_ERROR, thus hiding meaningful returns such as GST_FLOW_EOS.
Tests also added.
Most of avtpcvfdepay messages are currently logged as warnings, which can
make some scenarios - such as receiving two AVTP streams on the same
pipeline - too verbose.
This patch tones those message down to INFO or DEBUG level - more in
sync with avtpaafdepay logging.
To allow curlhttpsrc to support DASH streams that use the on-demand
profile, it needs to support HTTP Range GETs. In GStreamer, the RANGE
is specified by issuing a GST_FORMAT_BYTES seek to set the start and
end of the range. curlhttpsrc needs to implement seek and set the
appropriate curl options to make it add the Range header to the
request.
The major functionality gain this provides is proper reference counting
for a descriptor set. Overall this allows us to create descriptor sets
when they are needed (or reused from a cache) without violating any of
vulkan's object synchronisation requirements.
As there are a fixed number of sets available in a pool, the number of
descriptors in elements is currently hardcoded to 32. This can be extended
in a future change to create pools on the fly if that limit is ever overrun.
Allows a cleaner control flow when there is no fence available for use
with the trash list. An always signalled fence type will always return
TRUE for gst_vulkan_fence_is_signalled.
The following build error occurs:
vkdeviceprovider.h:30:10: fatal error: gst/vulkan/vulkan.h: No such file or directory
#include <gst/vulkan/vulkan.h>
^~~~~~~~~~~~~~~~~~~~~
