Worst case it will be empty. This fixes a crash when the base class
calls data_received() when the stream is neither is_isobmff or
has_isoff_ondemand_profile.
https://bugzilla.gnome.org/show_bug.cgi?id=796745
gst_curl_http_src_remove_queue_item() can free qelement and then
we get an invalid memory reference when we do qelement->next a
couple of lines below. Take the next pointer earlier so that we can
safely free.
This fixes an issue with SSA/ASS subtitles, where subtitles
would fail to appear if there was already a subtitle on screen.
This was because `struct _GstAssRender` had a single
`GstBuffer *subtitle_pending` member. This meant that
the assrender context could only be aware of one subtitle
at a time.
This patch changes the subtitle_pending member to a
linked list of pending subtitles.
The `gst_ass_render_chain_text` function no longer needs
to care about whether there are already subtitles pending,
it simply appends new subtitles to the list.
The `gst_ass_render_chain_video` function has been modified
to handle the list of pending subtitles.
Finally, the `gst_ass_render_pop_text` function has been
modified to pop the entire list of pending subtitles.
https://bugzilla.gnome.org/show_bug.cgi?id=735944
When compiling with clang-6 this error raises:
raw_decoder.c:411:1: error: unused function 'cpr1204_crc'
[-Werror,-Wunused-function]
This patch only comments it out.
https://bugzilla.gnome.org/show_bug.cgi?id=796957
When compiling with clang-6 this error pops out:
raw_decoder.c:1011:62: error: implicit conversion from enumeration
type 'const vbi_modulation' to different enumeration type
'vbi3_modulation' [-Werror,-Wenum-conversion]
This is because function vbi3_bit_slicer_set_params() sets
vbi3_modulation as enum type parameter, nonetheless vbi_modulation
enum is passed. Both enums looks semantically equal, thus the fix is a
simple cast.
https://bugzilla.gnome.org/show_bug.cgi?id=796957
This is the native format that is in use by the webrtc audio processing
library internally, so this avoids internal {de,}interleaving and
format conversion (S16->F32 and back)
https://bugzilla.gnome.org/show_bug.cgi?id=793605
This uses the new path for OpenCV headers. OpenCV now have
master headers files per modules, which reduce the amount of
required includes. Note that HIGHGUI was included to get the
imgcodecs includes, which I fixed, though the master header is
missing the C headers, so I included that directly. All the
image stuff should be ported to C++ eventually. Finally, this
patch also update the header checks to reflect the modules that
are really being used.
... instead of doing it ourselves. Otherwise, we should add more
logic here (such as checking GstClock and etc) which was already provided by
GstBaseSrc.
https://bugzilla.gnome.org/show_bug.cgi?id=796842
Relaxed the wl_shell interface constrains, so application that
pass via GstContext the wl_surface can use waylandsink in a
compositor without wl_surface and zwp_fullscreen_shell.
Added support for zwp_fullscreen_shell.
https://bugzilla.gnome.org/show_bug.cgi?id=796772
When scanning paths for LADSPA plugins, don't try and load
every random file as a module, as g_module_open ends up throwing
errors on Windows.
Use a G_MODULE_SUFFIX and GST_EXTRA_MODULE_SUFFIX suffix check as
we do for GStreamer plugins.
https://bugzilla.gnome.org/show_bug.cgi?id=796450
Refactor transportsendbin, and change the way
pads are blocked on dtlssrtpenc so that they
don't interfere with state changes.
As well as being easier to read, this fixes
spurious failures shutting down webrtcbin
if DTLS negotiation hasn't completed yet.
Move the errant piece of dtlssrtpenc state change
management from dtlstransport in the Webrtc libs,
into the transportsendbin that does the rest of
the element management so it's all in one place.
The `CV_RGB` macro is now in `imgproc.hpp`.
Fixes:
../subprojects/gst-plugins-bad/ext/opencv/gsthanddetect.cpp:497:40: error: ‘CV_RGB’ was not declared in this scope
cvCircle (img, center, radius, CV_RGB (0, 0, 200), 1, 8, 0);
^~~~~~
When negotiation is triggered by receiving caps on our sink pad
probes, we could encounter a race condition where need-negotiation
is emitted and the application requires the creation of an offer
before the current caps were actually updated.
This led to retrieving incomplete caps when creating the offer,
using find_codec_preferences -> pad_get_current_caps.
Instead, as we save the caps in the probe callback anyway, it is better
and thread safe to use these if they were set.
https://bugzilla.gnome.org/show_bug.cgi?id=796801
Matches the output from a similar glimagesink pipeline when
rotating from an upstream gltransformation passed through
the affine transformation meta with xpos/ypos being set.
https://bugzilla.gnome.org/show_bug.cgi?id=794401
Fixes random crashes when an allocated webrtcbin isn't
given fresh 0-filled memory in its allocation. It works
mostly because GMutex and GCond are automatically initialised
in that case.
Move freeing of the pad blocks back to before we call the
GstBin state change function, as there's something racy
going on on the build server otherwise, where the pads don't
unblock during downward state changes.
This is a bit of a stab in the dark, since I can't recreate
the build server failure locally.
Release references in pad blocks and release the memory in the
dispose function too, in case the state change doesn't get
run (because calling the parent state change fails).
When changing state downward, we can't set pads
to inactive if they are blocked, it will deadlock
trying to acquire the streaming lock.
Just calling the parent state change function
will do the correct things to unblock probes and
set the pad inactive, so let it do that and
remove the probes after the parent state change
function has run
https://bugzilla.gnome.org/show_bug.cgi?id=796682
When max is GST_CLOCK_TIME_NONE in the query, it should not
be set in the query handler, this otherwise could lead to
impossible situations, where the minimum latency ended up
greater than the maximum.
https://bugzilla.gnome.org/show_bug.cgi?id=796603
The flush function immediately returned when pitch->next_buffer_offset
was 0.
This is clearly wrong, as next_buffer_offset can be 0 when a single
input buffer has been received, and no output buffer has been produced
before receiving EOS.
Simply remove that condition.
https://bugzilla.gnome.org/show_bug.cgi?id=796603
This lets users call gst_pad_get_current_caps on newly-added
pads to easily determine what to plug them into.
We cannot copy sticky events unconditionally in core,
see #719437https://bugzilla.gnome.org/show_bug.cgi?id=796387
This new element allows decoding and overlaying CEA-708 Closed Caption
streams over video.
* Supports CDP and cc_data closedcaption/x-cea-708 streams
* Uses pango to render CC stream
* Support GstVideoOverlayComposition meta if downstream supports is
Tested on various test files.
Remains to be fixed/improved:
* Switch to GstByteReader (for code safety)
* Switch to GString (instead of manual pango string construction)
* Move pango/rendering code outside of main 708 decoder file (so
that actual CC parser/decoder can be (re)used in other scenarios).
Initial patches and improvements by:
* CableLabs RUIH-RI Team <ruihri@cablelabs.com>
* Steve Maynard <steve@secondstryke.com>
* cjun.wang" <cjun.wang@samsung.com>
https://bugzilla.gnome.org/show_bug.cgi?id=704881
zvbi switched to a lot more flexible CC detection in VBI.
The problem is that it returns a *lot* of non-VBI lines as containing
CC which isn't the case.
Current code from zapping/zvbi as of 2018-03-14. Files copied
are all LGPL v2+.
Changes from original zvbi code:
* Switch to gst-debug logging system
* Use glib for endianness detection
* Fix compilation warnings
Allows extracting GstVideoCaptionMeta from a stream and outputs
it to a standalone stream.
Part of a new 'ext' closedcaption plugin, since more features are
going to be added, which will depend on external dependencies such
as pango.
On debian system headers trigger compiler warnings like these,
don't error out on them:
/usr/include/directfb/direct/os/linux/glibc/waitqueue.h:95:1: note: previous definition of ‘direct_waitqueue_signal’ was here
Explicitly cast to void* because GCC 8 is (rightfully) upset that this is
"writing to an object of type ‘...’ with no trivial copy-assignment".
Caused by the new "class-memaccess" warning
This moves all the conversion related code to a single place, allows
less code-duplication inside compositor and makes the glmixer code less
awkward. It's also the same pattern as used by GstAudioAggregator.
The aggregated_frame is now called prepared_frame and passed to the
prepare_frame and cleanup_frame virtual methods directly. For the
currently queued buffer there is a method on the video aggregator pad
now.
Previously we assumed that the texture ID is going to be valid even
after unmapping the frame, as it was immediately unmapped before even
being used. Now we only unmap once we're done with the texture.
During element shutdown, the srtp encryption session
object can be cleaned up. In that case, return GST_FLOW_FLUSHING
from the chain function. Also properly return GST_FLOW_ERROR
upstream during actual errors.
https://bugzilla.gnome.org/show_bug.cgi?id=790508
Store a PTS of a highlight event directly into the event structure,
rather than the GST_EVENT_TIMESTAMP that will probably be removed
in GStreamer 2.0, and is hardly used.
https://bugzilla.gnome.org/show_bug.cgi?id=761477
If that threshold is reached, `iqa` will emit an ERROR message on the
bus, stopping any processing.
This way we can do a simpler comparison with gst-validate and the
process will error out if the specified threshold is reached.
https://bugzilla.gnome.org/show_bug.cgi?id=795428
We don't want to reset the muxer, otherwise the continuity counter will
reset after each segment and some software gets confused. We want to
create a continuous stream.
https://bugzilla.gnome.org/show_bug.cgi?id=794816
There are two issues, both related to dependency checking with the meson
support for the ladspa plugin.
With autotools, lrdf is handled like an optional dependency. But with
meson it is required. This makes the meson support less flexible and
inconsistent with autotools.
When autotools is used it properly checks if ladspa.h is available.
But with meson it does not, instead it treats lrdf as the main
dependency. This could cause a build failure if lrdf is installed, but
the ladspa sdk is not.
https://bugzilla.gnome.org/show_bug.cgi?id=794350
Strictly speaking, the TTML spec requires that text backgrounds extend
only to the font height of the related text, rather than to the vertical
distance between lines. The result of this is that there will typically
be vertical gaps between line backgrounds through which moving video can
be seen. Since this was unnacceptable to some content providers, v1.0.1
of the IMSC spec (which profiles TTML) adds a new attribute,
itts:fillLineGap[1], that allows content authors to specify that clients
should extend text backgrounds such that there are no gaps between
lines. This attribute is also going to be included in the next release
of EBU-TT-D.
This patch adds support for fillLineGap to ttmlparse and ttmlrender.
[1] https://www.w3.org/TR/ttml-imsc1.0.1/#itts-fillLineGaphttps://bugzilla.gnome.org/show_bug.cgi?id=787071
Fixes ffeb09e4ab
if (sscanf(...)) { // != 0
error;
}
Is not correct where != 0 indicates some kind of success.
Check instead that the correct number of elements were slurped.
SDP's are generated and consumed according to the W3C PeerConnection API
available from https://www.w3.org/TR/webrtc/
The SDP is either created initially from the connected
sink pads/attached transceivers as in the case of generating an offer or
intersected with the connected sink pads/attached transceivers as in
the case for creating an answer. In both cases, the rtp payloaded streams
sent by the peer are exposed as separate src pads.
The implementation supports trickle ICE, RTCP muxing, reduced size RTCP.
With contributions from:
Nirbheek Chauhan <nirbheek@centricular.com>
Mathieu Duponchelle <mathieu@centricular.com>
Edward Hervey <edward@centricular.com>
https://bugzilla.gnome.org/show_bug.cgi?id=792523
By removing the indirection to the main loop completely when receiving
the peer certificate. For reference, the on-decoder-key signal does not
have a redirection.
We call the base class first as this will remove the pad from
the aggregator, thus stopping misc callbacks from being called,
one of which (process_textures) will recreate the vertex_buffer
if it is destroyed
https://bugzilla.gnome.org/show_bug.cgi?id=760873
For libsrtp 1, add defines that translate the new namespaced identifiers
to the old unnamespaced ones. Also move the code for setting and getting
a stream's ROC into two compat functions that match libsrtp2's API.
It seems that libsrtp2 properly supports changing the ROC without having
to touch the sequence numbers afterwards, given that srtp_set_stream_roc
sets a pending_roc field, so the entire roc_changed dance should not be
needed anymore. The compat functions for libsrtp 1 just contain our
preexisting hacks, however, so it's still needed there.
libsrtp2 has no means of discovering the streams in the session, so to
create the stats structure we need to iterate over our own set of SSRCs.
For this we also need to re-add the previously removed ssrcs_set to the
encoder.
https://bugzilla.gnome.org/show_bug.cgi?id=776901
Fix regression when used in combination with new flvmux which was
ported to GstAggregator, and which sends plain video/x-flv caps
before sending full caps that include streamheaders.
Instead of a massive if/else/if/else/if/else/...:
* Use a common cleanup path for allocated items just before leaving
the function (which will be free-d only if we're not dealing with
a delayed SPU).
* "goto" that cleanup path wherever needed
CID #1427096
CID #1427114
In file included from ../../../gst-plugins-bad/ext/gl/gstopengl.c:47:0:
../../../gst-plugins-bad/ext/gl/gstglmixerbin.h:25:29: fatal error: gst/video/video.h: No such file or directory
This is to mimic LV2 and what is commonly documented over the
web. We also completely track these directories when updating
the cache now. Unlike LV2, the plugins are flat in the plugin
directories, so no need for the recursive lookup. This also fixes
support for Fedora and other architecture using lib64 as a libdir.
While keeping it simple, this patch tries and mimic lilv default path.
It does not matter if some path are duplicated due to symlink because in
the end it's lilv that will walk these paths. The worst case is that we
update our cache more often then strictly needed.
https://bugzilla.gnome.org/show_bug.cgi?id=791717
The AVERAGE-BANDWIDTH attribute in the EXT-X-STREAM-INF tag represents
the average segment bit rate of the Variant Stream, while the BANDWIDTH
attribute represents the peak segment bit rate of the Variant Stream.
(https://tools.ietf.org/html/draft-pantos-http-live-streaming-23#section-4.3.4.2)
Using the average bit rate instead of the peak bit rate for variant switching
is more efficient and appropriate. Sometimes due to VBR encoding,
the BANDWIDTH may represent a value way above the average bit rate,
which could result to players not switching to that variant stream
although network bandwidth is sufficiently available.
https://bugzilla.gnome.org/show_bug.cgi?id=790821
gstsrt.c: In function ‘gst_srt_client_connect_full’:
gstsrt.c:151:6: error: ‘sock’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (sock != SRT_INVALID_SOCK) {
https://bugzilla.gnome.org/show_bug.cgi?id=791302
When compiling with clang, an enum conversion error is triggered
since GstVideoFrameFlags are not GstVideoFlags.
This patch sets GST_VIDEO_FRAME_FLAG_NONE to the added video meta.
https://bugzilla.gnome.org/show_bug.cgi?id=791251
This patch adds code to gldownload to export the image as a
dmabuf if requested. The element now exposes memory:DMABuf as
a cap feature, and if it is selected, the element exports the
texture to an EGL image and then a dmabuf. It also implements a
fallback to system memory download in case the exportation failed.
https://bugzilla.gnome.org/show_bug.cgi?id=776927
We change the video info base on the received buffer. We need to
rollback these changes whenever we want to copy into our internal
pool of buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=790057
The SHM interface does not allow passing arbitrary strides and offsets,
for this reason, we simply disable this feature from the proposed pool.
This fixes video artifact seen when using the FFMPEG based video
decoder.
https://bugzilla.gnome.org/show_bug.cgi?id=790057
This reverts commit 47fd4d391e.
This patch is incorrect. It doesn't actually compile, and causes a crash
because the viv-fb window implementation needs a native EGL handle
to pass to fbCreateWindow, but the GstGLDisplayEGL handleis actually
an EGLDisplay now (and gets cast to the wrong type)
SRT[0] is an open source transport technology[1] that optimizes
streaming performance across unpredictable networks.
Although SRT is based on UDP, it works like connection-oriented
protocol. However, it doesn't mean that the SRT server or client
is necessarily to link to a receiver or a sender so, here, the
pairs of source and sink elements are introduced.
- srtserversink: SRT server to feed SRT stream
- srtclientsrc: SRT client to get SRT stream from srtserversink
- srtclientsink: SRT client to send SRT stream
- srtserversrc: SRT server to listen from srtclientsink
[0] https://github.com/Haivision/srt
[1] http://www.srtalliance.org/https://bugzilla.gnome.org/show_bug.cgi?id=785730
OpenJPEG 2.3 installs its headers to /usr/include/openjpeg-2.3. However,
since libopenjp2.pc seems to provide the right includedir CFLAGS at
least since version 2.1, instead of adding yet another version check,
just remove the subdir and the check for 2.2.
https://bugzilla.gnome.org/show_bug.cgi?id=788703
It is legal for a stream to reuse segments (marking discontinuities as
needed). Uplynk delivers such playlists for their placeholder loops.
Leave the URI scanning in place for playlists which have no
EXT-X-MEDIA-SEQUENCE tag. This should be harmless since the spec
requires these playlists to not be missing segments (RFC8216 6.2.2),
so we should be always matching on the first segment.
https://bugzilla.gnome.org/show_bug.cgi?id=788417
The function was basically one big if-else. Move the branch to the
one caller.
Currently, it's never called with previous_files == NULL. Assert that
this continues.
https://bugzilla.gnome.org/show_bug.cgi?id=788417
This simplifies the code a lot without any functional changes apart from
not closing the display connection. Closing the display connection is
not safe to do as it is shared between all other code in the same
process and no reference counting or anything happens at the platform
layer.
Ensure that region backgrounds are always show when tts:showBackground
is not explicitly set, in accordance with the default behavour given in
the TTML spec.
https://bugzilla.gnome.org/show_bug.cgi?id=787942
when using internal window, window resize should work
when pause state, but expose only do redisplay when
window_id is valid. So expose should do redisplay all
the time.
https://bugzilla.gnome.org/show_bug.cgi?id=787394
Move the package defines for GST_PLUGIN_DEFINE from the
command line into the source file to avoid quoting issues
(-DPACKAGE_NAME="foo" means the quotes won't actually make
it to the compiler and then it no longer gets a string constant).
1. Propagate the GstGLDisplay we create
2. Add the created GstGLContext to the propagated GstGLDisplay
Otherwise with multi-branch GL pipelines involving gtkglsink, things
will fall apart and errors will be genarated somewhere.
Except for gst/gl/gstglfuncs.h
It is up to the client app to include these headers.
It is coherent with the fact that gstreamer-gl.pc does not
require any egl.pc/gles.pc. I.e. it is the responsability
of the app to search these headers within its build setup.
For example gstreamer-vaapi includes explicitly EGL/egl.h
and search for it in its configure.ac.
For example with this patch, if an app includes the headers
gst/gl/egl/gstglcontext_egl.h
gst/gl/egl/gstgldisplay_egl.h
gst/gl/egl/gstglmemoryegl.h
it will *no longer* automatically include EGL/egl.h and GLES2/gl2.h.
Which is good because the app might want to use the gstgl api only
without the need to bother about gl headers.
Also added a test: cd tests/check && make libs/gstglheaders.check
https://bugzilla.gnome.org/show_bug.cgi?id=784779
This is useful for autoplay for example. With autoplay, it is necessary to
wait until the scene graph is fully set up. This signal is emitted once the
QML item node is ready. So, inside a connected slot, the pipeline's state
can be set to PLAYING to automatically start playback as soon as the QML
script is loaded.
https://bugzilla.gnome.org/show_bug.cgi?id=786246
OpenJPEG 2.2 has some API changes and thus ships its headers in a new
include path. Add a configure check (to both meson and autoconf) to
detect the newer version of OpenJPEG and add conditional includes.
Fix the autoconf test for OpenJPEG 2.1, which checked for HAVE_OPENJPEG,
which was always set even for 2.0.
https://bugzilla.gnome.org/show_bug.cgi?id=786250
Otherwise we will get it again later for output, however this frame will
never actually be output so we will shift timestamps.
This is especially bad if we're handling a live stream where the first
frames are not keyframes. We would output the keyframe with the
timestamp of the first frame, and everything would be too late when
arriving in the sink.
If the version of the curl library is recent enough to allow support
for HTTP2 (i.e. CURL_VERSION_HTTP2 is defined) but does not actually
have that feature enabled, the call to
g_object_class_install_property() uses an incorrect default value for
the "http-version" property. The default should be 1.1 if HTTP2 is
not supported by libcurl or if not enabled by libcurl.
https://bugzilla.gnome.org/show_bug.cgi?id=786049
Previously this was broken, because a flushing seek causes unlock()
to be called and in the implementation of unlock() we close the
socket, so the seek errors out.
This patch fixes it by re-connecting before the seek.
Unfortunately, a seek does not work properly right after
re-connecting, so a small hack is also in place: we read 1 buffer
before seeking to allow librtmp to do its processing in RTMP_Read()
https://bugzilla.gnome.org/show_bug.cgi?id=785941
In some cases, it is possible that we need to update the manifest before
pads have been exposed at all. If there are no current pads, just expose
the next prepared streams. This doesn't handle the case where a manifest
update would happen while a live streams is changing periods, which is a
type of use case that we're unaware of real usages yet.
https://bugzilla.gnome.org/show_bug.cgi?id=783028
QML can destroy the video widget at any time, leaving
us with a dangling pointer. Use a lock and a proxy
object to cope with that, and block in the widget
destructor if there are ongoing calls into the widget.
Add a function to install the default RGBA pad templates,
but don't make them required so that there can be
GstGLFilter sub-classes with different input/output
caps if they want. Remove the hard-coded RGBA restriction in
the set_caps_features call, as it will be taken care
of by intersecting with the pad templates.
Update all the sub-classes to match
Build fails in ext/vulkan/xcb and ext/vulkan/wayland when:
* building from tarball
* building out-of-tree
* Only one WSI integration (xcb or wayland) is enabled by configure.ac
This is because vkconfig.h from source directory gets used instead
of the generated one.
Add the correct build directory to "-I". Use angle bracket
include in vkapi.h so that it actually looks in the include search
path instead of defaulting to the same (source tree) directory.
https://bugzilla.gnome.org/show_bug.cgi?id=784539
This reverts commit 1883ac26b7.
This breaks the build on older versions of openjpeg:
gstopenjpegdec.c:752:30: error: ‘opj_image_comp_t {aka struct opj_image_comp}’ has no member named ‘alpha’
https://bugzilla.gnome.org/show_bug.cgi?id=783591
This is wrong because:
* If the rate is negative we should check for the *previous* period
* adaptivedemux already does the proper checks before calling this
method
This ensures smoother playback. It looks weird if we first do a big
jump, then play a couple of consecutive frames, just to again skip ahead
quite a bit because we ran late again.
Far enough here means more than 500ms or 4 times the average keyframe
download time. There is no need to jump ahead by one average keyframe
download time in this case.
This makes playback smooth if the network is fast enough.
When dealing with key-unit trick mode downloads, the goal is to
provide the best "Quality of Experience". This is achieved by:
1) maximizing the number of frames displayed per second
2) avoiding "stalling" as much as possible (i.e. not downloading and
decoding frames fast enough)
This implementation achives this by:
1) Knowing very precisely the current keyframe being download (i.e
more accurate than at the fragment level which might contain more
than one keyfram). This is the new "actual_position" variable
introduced by this commit
2) Knowing the position of downstream (provided by QoS and stored
in the adaptivedemuxstream qos_earliest_time variable)
3) Knowing how long it takes to request and fully download a keyframe
(the average_download_time variable)
Taking those 3 variables into account, whenever a keyframe has been
pushed downstream we calculate a "target time" (target_time variable)
which is the ideal next keyframe time to request so that:
1) It will be requested/downloaded/demuxed/decoded in time to be
displayed without being too late
2) It will not be too far ahead that it would cause too few frames
per second to be displayed.
How far ahead we will request is inversily proportional to how close
the actual position (actual_position) is from the downstream
position (qos_earliest_time). The more is buffered between the source
and the sink, the "closer" the target time will be, and therefore
the more frames per seconds will be displayed (up to the limit
of keyframes_per_second * absolute_rate).
If a manifest has non-zero presentation time offset
(i.e., earliest presentation time specified by sidx box is not zero),
the initial sidx position shouldn't be zero. Since we cannot define
exact sidx position until parsing sidx box, set the value to unknown.
https://bugzilla.gnome.org/show_bug.cgi?id=782693
This embeds the muxer inside the sink and accepts elementary streams
while the old HLS sink required the muxer outside. Apart from that the
interface is the same as before.
Currently only mpegtsmux is supported, but support for other muxers is
just a matter of adding a property.
The advantage of the new sink is that it reduces complexity a lot and
properly handles pre-encoded streams with appropriately spaced
keyframes.
https://bugzilla.gnome.org/show_bug.cgi?id=781496
This patch bumps the required meson to 0.40.1 as gstreamer core just
did, and cleanup some code to use a feature from 0.37 that allow
specifying version range when checking dependency.
https://bugzilla.gnome.org/show_bug.cgi?id=780654
A common subtitling use case is live-generated subtitles, in which each
new word is contained in its own span, and the spans are displayed
sequentially, with the effect that lines of displayed subtitles are
built up word-by-word.
This can, however, cause problems when the number of words in a block is
greater than the number of allowed GstMemorys in a GstBuffer.
Since in this use case each span will have the same styling as adjacent
spans, we can join adjacent spans (and other inline elements, such as
breaks) into a single element containing the concatenated text of each,
thus avoiding the limit of GstMemorys in a GstBuffer and also reducing
the amount of styling/layout metadata that is attached to each buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=781725
The parser stores the text from each inline element of a scene in its
own GstMemory, which is inserted in the GstBuffer containing the scene
data. However, GstBuffers can contain only a limited number of
GstMemorys. Therefore, don't add more than the maximum number of
GstMemorys to each buffer, and warn if this is attempted.
https://bugzilla.gnome.org/show_bug.cgi?id=781725
When parsing <br> elements, store an actual newline in the text field of
the created TtmlElement. They then don't need to be treated as a
separate case from anon-span elements when being processed.
https://bugzilla.gnome.org/show_bug.cgi?id=781725
Encapsulates in a function the code that warns of an illegally
positioned element, rather than repeating the same code multiple times.
Also frees a string allocated by ttml_get_element_type_string, which was
previously being leaked.
https://bugzilla.gnome.org/show_bug.cgi?id=781725
../subprojects/gst-plugins-bad/ext/smoothstreaming/gstmssdemux.c: In function ‘gst_mss_demux_requires_periodical_playlist_update’:
../subprojects/gst-plugins-bad/ext/smoothstreaming/gstmssdemux.c:729:16: error: unused variable ‘mssdemux’ [-Werror=unused-variable]
GstMssDemux *mssdemux = GST_MSS_DEMUX_CAST (demux);
^~~~~~~~
cc1: all warnings being treated as errors
Without this, for streams where the content is stored indefinitely and
can be seeked on, the duration would never increase when in paused or,
until we reached near the end of the currently advertised stream (where
the internal fragment parser would see descriptions of new fragments).
The TTML spec has an issue in which tab (U+0009) characters that are
first in a sequence of whitespace characters are not suppressed at the
start and end of line areas. This issue was reported in [1] and the
editor of the TTML specs confirmed that this was not the intention
behind the spec.
The editor has created an issue to fix this in both the TTML1 and TTML2
specs [2], giving a proposal of what the spec should say. This patch
updates ttmlparse to implement the intended behaviour as proposed, in
which tabs in the input are converted to spaces before processing.
[1] https://github.com/w3c/imsc/issues/224
[2] https://github.com/w3c/ttml1/issues/235https://bugzilla.gnome.org/show_bug.cgi?id=781539
If multiple styles/regions with the same ID are present in the input
(which is not allowed in TTML), use the last and give a warning.
Fixes CID #1405134.
Clang's static analyser found potential code paths in which variables
were being used in comparisons when uninitialised. Fix by properly
handling out-of-range value returned by gst_ttml_get_element_index.
The previous code was handling both as separate steps and then tried to
combine the results, but this resulted in all kinds of bugs which showed
themselves as failures during seeking and offset tracking getting wrong.
This also showed itself with gst-validate on the sample stream.
The rewritten code now parses everything in one go and tracks the
current offset only once, and as a side effect simplifies the code a
lot.
Also added is detection of SIDX that point to other SIDX instead of
actual media segments, e.g. with this stream:
http://dash.akamaized.net/dash264/TestCases/1a/sony/SNE_DASH_SD_CASE1A_REVISED.mpd
Support for this will have to be added at some point but that should
also be easier with the rewritten code.
https://bugzilla.gnome.org/show_bug.cgi?id=781233
Spec 5.3.9.2 is saying about the existence of duration and SegmentTimeline
only for Representation level. Other level such as Period or AdaptationSet
might not have the attributes.
https://bugzilla.gnome.org/show_bug.cgi?id=780570
Allow 1 extra char in the tmp buffer where the motion cell
snippets are generated, so that it doesn't leave off a comma
when dealing with cells that have 2 numerals in both indices
Don't hide build behind --enable-experimental. Our goal is to not
autoplug it for now, so let's just always build it if the dependencies
are there and hide autoplugging enablement behind an env var.
This reverts commit c9fbf3459a.
The representation ID comparision here was wrong and triggering always
if the ID did *not* change, causing needless redownloading of the
header. The sample stream provided in the bug does not exist anymore.
Otherwise we'll get into an infinite loop here. Now this is still not
correct and will cause a clean error, but at least it won't hang forever
anymore.
For each period, media presentation is the relative to the
period-start time. So SIDX seek position should be target seek
position minus period-start. Also, if presentationTimeOffset
is defined, the value should be compensated
https://bugzilla.gnome.org/show_bug.cgi?id=780397
Significant whitespace in elements that don't have begin/end values
should inherit timing from its parent, or if no its parents have no
timing, from the document's Root Temporal Extent. Currently, such
whitespace is removed, which is not spec-compliant. Fix this by
retaining whitespace in content nodes, and assigning a Root Temporal
Extent of 24 hours to any significant whitespace whose parents have no
associated timing.
https://bugzilla.gnome.org/show_bug.cgi?id=781027
The specified behaviour in TTML when lineHeight is "normal" is different
from the behaviour when a percentage is given. In the former case, the
line height is a percentage (the TTML spec recommends 125%) of the largest
font size that is applied to the spans within the block; in the latter
case, the line height is the given percentage of the font size that is
applied to the block itself.
The code doesn't correctly implement this behaviour; this patch fixes
that.
https://bugzilla.gnome.org/show_bug.cgi?id=780402
In TTML, the height of every line in a block is determined by lineHeight
and fontSize style attributes, and should be the same for each line in
that block, regardless of whether different sized text appears on
different lines. Currently, a single PangoLayout is used to lay out all
the text in a block; however, pango will vary the line height in a
layout depending on the size of text used in each line, which is not
compliant with TTML.
This patch makes ttmlrender lay out the lines in a block itself, rather
than using a PangoLayout to do the work. The code still uses a
PangoLayout to render the text of each element, but the overall layout
of the text in a block is now controlled by ttmlrender itself. By doing
this, ttmlrender is able to ensure that the height of each line in a
block is correct.
https://bugzilla.gnome.org/show_bug.cgi?id=780402
The element now exposes properties to enable and configure
voice activity detection, and posts "voice-activity" messages
when the return value of stream_has_voice () changes.
https://bugzilla.gnome.org/show_bug.cgi?id=779138
A live manifest may have a set (> LookAheadFragmentCount) of fragments
that have already been served and are stored on the server, maybe
indefinitely. Adding the parsed live fragments after the manifest
fragments breaks duration reporting and the seekable range.
Fix by only adding parsed fragments outside the list of fragments which
assumes that the fragment list in the manifest is accurate enough to not
stray too far off what's in the retrieved data.
https://bugzilla.gnome.org/show_bug.cgi?id=779447
Instead of just going to the first or last fragment, report if we're
going outside the index. This should never happen unless there's a bug
or the stream is broken.
Allow some possibility for inaccuracies here though.
There is no guarantee that the index positions are the same between
representations, and assuming this easily causes us to get into invalid
index positions.
If a MPD is On-Demand profile and no index described, demux will terminate
download loop after parsing inband SIDX with flow return custom-success.
At this moment, SIDX index is excat target position, but finish_fragment()
might cause re-advancing subfragment depending on MPD structure.
https://bugzilla.gnome.org/show_bug.cgi?id=776200
SIDX's base offset (i.e., byte offset of SIDX + sidx.first_offset)
mostly vary as per fragment. Also, target SIDX index must be zero for the
new fragment.
https://bugzilla.gnome.org/show_bug.cgi?id=776200
Try to find fragment using MPD first, then do refinement to find
target subframgnet using SIDX if possible. Note that, if target fragment
was moved from the previously activated one, we should assume that
the last SIDX is invalid for new fragment.
https://bugzilla.gnome.org/show_bug.cgi?id=776200
SIDX based playback is not restricted to SegmentBase, but it possible
with SegmentList/SegmentTemplate. In the latter case, each fragment
has its own SIDX box and might be subdivided into subfragment.
So, demux should not assume that the end of subfragment is the end
of stream. Moreover, should try advance subfragment only if there
are remaining subfragments.
With additional fixes by Sebastian Dröge <sebastian@centricular.com>
https://bugzilla.gnome.org/show_bug.cgi?id=776200
All code interacting with Objective-C objects should now use Automated
Reference Counting rather than manual memory management or Garbage
Collection. Because ARC prohibits C-structs from containing
references to Objective-C objects, all such fields are now typed
'gpointer'. Setting and gettings Objective-C fields on such a
struct now uses explicit __bridge_* calls to tell ARC about
object lifetimes.
https://bugzilla.gnome.org/show_bug.cgi?id=777847
hlsdemux tries to find type if given buffer size is large enought to
find type (currently the threshold is 2KB), or EOS in some cases.
However, since there can be small byte fragments such as WebVTT,
demux should try to find type at the end of a fragment
https://bugzilla.gnome.org/show_bug.cgi?id=779011
This appears to be the internal limit of voaacenc, higher
bitrates will be ignored and 128 kbps output will be produced
instead. Therefore, we might just as well limit the allowed
property values, so that people who try to set higher bitrates
get a big fat warning instead of silently a much lower bitrate.
The PCR_flag and PCR value is in adaptation_field, not in payload.
The MSB of adaptation_field_control is used as whether adaptation_
field is exist or not.
For the case(PCR in only adaptation_field without payload), we modify
checking condition about adaptation_field_control field.
https://bugzilla.gnome.org/show_bug.cgi?id=778731
When MPD@suggestedPresentationDelay is not present in the MPD,
dashdemux can provide default suggestedPresentationDelay. However
when applying default value of suggestedPresentationDelay, the value
should be subtracted from current time, not added to it. When streams
setup is performed and live point is calculated, we have to go to the
wall clock (current time) minus suggestedPresentationDelay, if we tried
to start with current time plus suggestedPresentationDelay, we would
be asking for future stream, which has not yet been recorded. Also
the value needs to be converted from ms to us.
https://bugzilla.gnome.org/show_bug.cgi?id=764726
For duration queries on live streams, adaptivedemux ignores the query.
The problem then is that the query is answered by the downstream
qtdemux element, with the duration of the currently passing fragment.
This commit changes the behaviour of adaptivedemux to answer the duration
queries for live streams, returning GST_CLOCK_TIME_NONE.
https://bugzilla.gnome.org/show_bug.cgi?id=753879
The same symbol also exists in libgstgl, although marked as private and
internal. This has no effect when doing static linking and there's a
symbol conflict.
When the sink receives a buffer that is neither a wl_shm one nor a
dmabuf one, this buffer is copied to an internal wl_shm buffer before
being sent to the display.
In that case, the actual size of the received buffer (which may differ
from the one negotiated in the caps) must be used.
https://bugzilla.gnome.org/show_bug.cgi?id=777841
Unless the video format has an alpha component (ARGB, ...), set the
video_surface opaque.
In the usual case where the black area_surface has the same size as the
video_surface (eg: run gst-play-1.0 video.mp4), this makes the black
surface totally occluded which makes weston compositor's life easier
since it can ignore that surface.
Also unconditionally set the black area_surface opaque.
https://bugzilla.gnome.org/show_bug.cgi?id=778078
Otherwise the destructor will never be called, and we would have to call
the constructors manually at some point... which we never did, so
calling release() on it before it got otherwise initialized caused a
crash. For example when running gst-inspect-1.0.
Vulkan handles are either pointers (64-bit) or 64-bit integer
handles (32-bit). Cast the type in failure cases.
vkwindow.c:229:561: error: return makes integer from pointer without a cast [-Werror=int-conversion]
vkwindow.c:231:194: error: return makes integer from pointer without a cast [-Werror=int-conversion]
https://bugzilla.gnome.org/show_bug.cgi?id=777979
hls live starts playback from the allowed latest fragment,
but its "sequence position" is set to zero, and so stream
time is also set to zero.
This does not make sense, because hls live allows seeking to past position,
and it's negative stream time from downstream element's point of view.
Note that, allowed seekable range (and seeking query) is
from the first fragment of playlist to the allowed latest fragment.
https://bugzilla.gnome.org/show_bug.cgi?id=777682
HLS spec 6.3.3 is saying that
"the client SHOULD NOT choose a segment which starts less than
three target durations from the end of the Playlist file."
To ensure above statement, the third fragment from the end of playlist
should be excluded from seekable range and also from available starting fragment.
(i.e., the fourth fragment from end of playlist is the starting fragment).
https://bugzilla.gnome.org/show_bug.cgi?id=777682
During live playback, the first fragment in a updated
playlist can be advanced from that of startup playlist.
Meanwhile, since hlsdemux finds target seek position
by just accumulating fragment's duration, the base should
be adjusted to the updated first fragment's timestamp.
https://bugzilla.gnome.org/show_bug.cgi?id=777682
vkimagememory.c:64:14: warning: implicit conversion from enumeration type 'GstVideoGLTextureType' to different enumeration type 'VkFormat' (aka 'enum VkFormat') [-Wenum-conversion]
return GST_VIDEO_GL_TEXTURE_TYPE_RGB16;
https://bugzilla.gnome.org/show_bug.cgi?id=777760
gstmpeg2enc.cc:224:5: warning: variable 'n' is incremented both in the loop header and in the loop body [-Wfor-loop-analysis]
n++;
^
gstmpeg2enc.cc:221:29: note: incremented here
for (n = 0; fpss[n] != 0; n++) {
^
Without failing, we would play back random parts of the stream which is
arguably a worse user experience, and failing is also recommended by the
spec here.
And also handle live streams without any media sequence numbers at all
properly, that is, make sure the sequence numbers are increasing instead
of starting again at 0 every time.
https://bugzilla.gnome.org/show_bug.cgi?id=775665
Parsing SIDX box was allowed even if "indexRange" attribute does not appear
for On-Demand profile. However, actual seeking using SIDX index did not happen
since download loop keep working on.
To use SIDX index in that case, demux should try it in the next download loop.
https://bugzilla.gnome.org/show_bug.cgi?id=777394
gst_caps_intersect () may return an increased reference of one of the
input caps.
Fixes critical in the simple-launch-lines test:
Unexpected critical/warning: gst_caps_set_features: assertion 'IS_WRITABLE (caps)' failed
Reset redraw_pending at display disconnection, so we can re-connect
later from a clean state (avoid endless buffer drops).
Add a log to inform of dropped buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=775791
sidx has "first_offset" syntax which represents the distance in bytes
from anchor point to media fragment. If present, we should adjust
sidx_base_offset.
https://bugzilla.gnome.org/show_bug.cgi?id=776431
Previous patch allows sidx box parsing from incoming buffers.
Since the incoming buffer boundary might be over sidx box,
there can be remaining buffer in isobmff parser adapter.
https://bugzilla.gnome.org/show_bug.cgi?id=776352
If they were not ported after 4+ years it seems unlikely that anybody is
ever going to need them again. They're still in the GIT history if
needed.
https://bugzilla.gnome.org/show_bug.cgi?id=774530
They often don't only contain the PCR information but also other
metadata, like title. Give this information to the pipeline.
Also strip the tags from the stream as we a) already parsed them now and
b) decoders don't like these tags to happen in the middle of the stream
(i.e. the start of each fragment) and tagdemux only can strip them off
the beginning and end.
middle textures in gleffects do not need to use GstGLMemoryPBO as they
aren't transfering data to/from the GPU. This will cost too much DMA
memory and cause performance issue. Change the allocator to use non-PBO
GstGLMemory.
https://bugzilla.gnome.org/show_bug.cgi?id=776072
glvideomixer does not support it currently and it needs special support
for handling this correctly, and is rather non-trivial to implement for
all formats.
For pre-1.1.x openssl, a callback to set the thread id needs to be
provided to openssl. In 0.9.x the thread id was an unsigned long. In
1.0.x it was expanded to be able to hold a void*. Here we change to use
the 1.0.x API so that the thread id can always hold a GThread*, even on
platforms like msvc x64 where unsigned long is only 32 bits.
All of this is still #ifdef'd out of existence when building with
openssl 1.1.x or later which changed the thread API again, and does not
need a thread id callback.
https://bugzilla.gnome.org/show_bug.cgi?id=775292
Simply produce the result into the output image provided by the base
class. This avoid useless copy. This also removes unchecked buffer map
and ensure that GstVideoMeta is respected (for stride mostly).
https://bugzilla.gnome.org/show_bug.cgi?id=775377
Simply produce the result into the output image provided by the base
class. This avoid useless copy. This also removes unchecked buffer map
and ensure that GstVideoMeta is respected (for stride mostly).
https://bugzilla.gnome.org/show_bug.cgi?id=775377
Simply produce the result into the output image provided by the base
class. This avoid useless copy. This also removes unchecked buffer map
and ensure that GstVideoMeta is respected (for stride mostly).
https://bugzilla.gnome.org/show_bug.cgi?id=775377
When a MSS server hosts a live stream the fragments listed in the
manifest usually don't have accurate timestamps and duration, except
for the first fragment, which additionally stores timing information
for the few upcoming fragments. In this scenario it is useless to
periodically fetch and update the manifest and the fragments list can
be incrementally built by parsing the first/current fragment.
https://bugzilla.gnome.org/show_bug.cgi?id=755036
The schroedinger headers unconditionally #define over C99's rint when
compiling with msvc which messes up the later inclusion of math.h.
Including math.h before schroedinger headers avoids getting syntax
errors in math.h
https://bugzilla.gnome.org/show_bug.cgi?id=775293
a) Use get_pkgconfig_variable() to get the opencv prefix
b) Place an upper limit on the opencv version
c) Ensure that headers are available
(b) and (c) just copy what the configure.ac checks do.
The way how strchr() was called here, it could easily read after the end
of the string. Use g_ascii_isspace() instead.
Detected by asan in the unit test.
When one is only updating the "stop" position (i.e. non-flushing seek,
with GST_SEEK_TYPE_NONE on the "start" (or stop in reverse) position),
we only need to store those values instead of moving the current position.
https://bugzilla.gnome.org/show_bug.cgi?id=775127
wldisplay.c:179:15: error: comparison of unsigned enum expression < 0 is always false [-Werror,-Wtautological-compare]
if (shm_fmt < 0)
~~~~~~~ ^ ~
gstsegmentation.cpp:419:40: error: implicit conversion from 'int' to 'char' changes value from 255 to -1 [-Werror,-Wconstant-conversion]
filter->cvFG->imageData[j] = 255;
~ ^~~
https://bugzilla.gnome.org/show_bug.cgi?id=775112
We set it to TRUE here, but later we set it to TRUE again anyway if the
parsing actually succeeded at this point. Let's keep the second one.
CID 1374360.
This was used by MSN messenger in prehistoric times, it's safe
to say no one needs or wants this any more these days. For
decoding old recordings there's still a decoder in ffmpeg.
https://bugzilla.gnome.org/show_bug.cgi?id=597616
Section 5.3.3 in ISO/IEC 23009-1:2014 defines that invalid references
(e.g., invalide URI or cannot be resolved) specified by "@xlink:href" attribute
shall be removed. That means, we should play it without error,
and just ignore the corresponding element.
It's similar to "urn:mpeg:dash:resolve-to-zero:2013".
https://bugzilla.gnome.org/show_bug.cgi?id=774463
It only offers one metric for now, "dssim", available if
https://github.com/pornel/dssim was installed on the system
at the time the plugin was compiled.
The spearman correlation for dssim against the TID2008 dataset
is 0.81, against 0.70 for the old ssim implementation, and
it runs 15 times faster.
https://bugzilla.gnome.org/show_bug.cgi?id=751324
External xml could have empty, one or multiple top-level "Period" elements.
Because xml parser cannot parse the multiple top-level elements
(i.e., no root element), we need to wrap a xml in order to make root element.
See also ISO/IEC 23009-1:2014 5.3.2.2
https://bugzilla.gnome.org/show_bug.cgi?id=774357
PlayReady being the one of the few DRM formats encoding its data with
base64 it was not consistent to have a special case for this. So the
base64 decoding operation now needs to be done by the protection event
consumer, if needed.
https://bugzilla.gnome.org/show_bug.cgi?id=774112
PlayReady being the one of the few DRM formats encoding its data with
base64 it was not consistent to have a special case for this. So the
base64 decoding operation now needs to be done by the protection event
consumer, if needed.
https://bugzilla.gnome.org/show_bug.cgi?id=774112
Allows seeking through the available fragments that are still available
on the server as specified by the DVRWindowLength attribute in the
manifest.
https://bugzilla.gnome.org/show_bug.cgi?id=774178
1. Need set use-default-fbo to qquickwindow during set property
to support change render target on the fly.
2. Calculate qmlglsrc refresh frame rate in qtglwindow
https://bugzilla.gnome.org/show_bug.cgi?id=774035
